| /* |
| * Simulated SCSI driver. |
| * |
| * Copyright (C) 1999, 2001-2003 Hewlett-Packard Co |
| * David Mosberger-Tang <davidm@hpl.hp.com> |
| * Stephane Eranian <eranian@hpl.hp.com> |
| * |
| * 02/01/15 David Mosberger Updated for v2.5.1 |
| * 99/12/18 David Mosberger Added support for READ10/WRITE10 needed by linux v2.3.33 |
| */ |
| #include <linux/config.h> |
| #include <linux/blk.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/timer.h> |
| |
| #include <scsi/scsi.h> |
| |
| #include <asm/irq.h> |
| |
| #include "../drivers/scsi/scsi.h" |
| #include "../drivers/scsi/sd.h" |
| #include "../drivers/scsi/hosts.h" |
| #include "simscsi.h" |
| |
| #define DEBUG_SIMSCSI 1 |
| |
| /* Simulator system calls: */ |
| |
| #define SSC_OPEN 50 |
| #define SSC_CLOSE 51 |
| #define SSC_READ 52 |
| #define SSC_WRITE 53 |
| #define SSC_GET_COMPLETION 54 |
| #define SSC_WAIT_COMPLETION 55 |
| |
| #define SSC_WRITE_ACCESS 2 |
| #define SSC_READ_ACCESS 1 |
| |
| #if DEBUG_SIMSCSI |
| int simscsi_debug; |
| # define DBG simscsi_debug |
| #else |
| # define DBG 0 |
| #endif |
| |
| static void simscsi_interrupt (unsigned long val); |
| DECLARE_TASKLET(simscsi_tasklet, simscsi_interrupt, 0); |
| |
| struct disk_req { |
| unsigned long addr; |
| unsigned len; |
| }; |
| |
| struct disk_stat { |
| int fd; |
| unsigned count; |
| }; |
| |
| extern long ia64_ssc (long arg0, long arg1, long arg2, long arg3, int nr); |
| |
| static int desc[16] = { |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 |
| }; |
| |
| static struct queue_entry { |
| Scsi_Cmnd *sc; |
| } queue[SIMSCSI_REQ_QUEUE_LEN]; |
| |
| static int rd, wr; |
| static atomic_t num_reqs = ATOMIC_INIT(0); |
| |
| /* base name for default disks */ |
| static char *simscsi_root = DEFAULT_SIMSCSI_ROOT; |
| |
| #define MAX_ROOT_LEN 128 |
| |
| /* |
| * used to setup a new base for disk images |
| * to use /foo/bar/disk[a-z] as disk images |
| * you have to specify simscsi=/foo/bar/disk on the command line |
| */ |
| static int __init |
| simscsi_setup (char *s) |
| { |
| /* XXX Fix me we may need to strcpy() ? */ |
| if (strlen(s) > MAX_ROOT_LEN) { |
| printk(KERN_ERR "simscsi_setup: prefix too long---using default %s\n", |
| simscsi_root); |
| } |
| simscsi_root = s; |
| return 1; |
| } |
| |
| __setup("simscsi=", simscsi_setup); |
| |
| static void |
| simscsi_interrupt (unsigned long val) |
| { |
| unsigned long flags; |
| Scsi_Cmnd *sc; |
| |
| spin_lock_irqsave(&io_request_lock, flags); |
| { |
| while ((sc = queue[rd].sc) != 0) { |
| atomic_dec(&num_reqs); |
| queue[rd].sc = 0; |
| if (DBG) |
| printk("simscsi_interrupt: done with %ld\n", sc->serial_number); |
| (*sc->scsi_done)(sc); |
| rd = (rd + 1) % SIMSCSI_REQ_QUEUE_LEN; |
| } |
| } |
| spin_unlock_irqrestore(&io_request_lock, flags); |
| } |
| |
| int |
| simscsi_detect (Scsi_Host_Template *templ) |
| { |
| templ->proc_name = "simscsi"; |
| return 1; /* fake one SCSI host adapter */ |
| } |
| |
| int |
| simscsi_release (struct Scsi_Host *host) |
| { |
| return 0; /* this is easy... */ |
| } |
| |
| const char * |
| simscsi_info (struct Scsi_Host *host) |
| { |
| return "simulated SCSI host adapter"; |
| } |
| |
| int |
| simscsi_biosparam (Disk *disk, kdev_t n, int ip[]) |
| { |
| unsigned capacity = disk->capacity; |
| |
| ip[0] = 64; /* heads */ |
| ip[1] = 32; /* sectors */ |
| ip[2] = capacity >> 11; /* cylinders */ |
| return 0; |
| } |
| |
| static void |
| simscsi_readwrite (Scsi_Cmnd *sc, int mode, unsigned long offset, unsigned long len) |
| { |
| struct disk_stat stat; |
| struct disk_req req; |
| |
| req.addr = __pa(sc->request_buffer); |
| req.len = len; /* # of bytes to transfer */ |
| |
| if (sc->request_bufflen < req.len) |
| return; |
| |
| stat.fd = desc[sc->target]; |
| if (DBG) |
| printk("simscsi_%s @ %lx (off %lx)\n", |
| mode == SSC_READ ? "read":"write", req.addr, offset); |
| ia64_ssc(stat.fd, 1, __pa(&req), offset, mode); |
| ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION); |
| |
| if (stat.count == req.len) { |
| sc->result = GOOD; |
| } else { |
| sc->result = DID_ERROR << 16; |
| } |
| } |
| |
| static void |
| simscsi_sg_readwrite (Scsi_Cmnd *sc, int mode, unsigned long offset) |
| { |
| int list_len = sc->use_sg; |
| struct scatterlist *sl = (struct scatterlist *)sc->buffer; |
| struct disk_stat stat; |
| struct disk_req req; |
| |
| stat.fd = desc[sc->target]; |
| |
| while (list_len) { |
| req.addr = __pa(sl->address); |
| req.len = sl->length; |
| if (DBG) |
| printk("simscsi_sg_%s @ %lx (off %lx) use_sg=%d len=%d\n", |
| mode == SSC_READ ? "read":"write", req.addr, offset, |
| list_len, sl->length); |
| ia64_ssc(stat.fd, 1, __pa(&req), offset, mode); |
| ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION); |
| |
| /* should not happen in our case */ |
| if (stat.count != req.len) { |
| sc->result = DID_ERROR << 16; |
| return; |
| } |
| offset += sl->length; |
| sl++; |
| list_len--; |
| } |
| sc->result = GOOD; |
| } |
| |
| /* |
| * function handling both READ_6/WRITE_6 (non-scatter/gather mode) |
| * commands. |
| * Added 02/26/99 S.Eranian |
| */ |
| static void |
| simscsi_readwrite6 (Scsi_Cmnd *sc, int mode) |
| { |
| unsigned long offset; |
| |
| offset = (((sc->cmnd[1] & 0x1f) << 16) | (sc->cmnd[2] << 8) | sc->cmnd[3])*512; |
| if (sc->use_sg > 0) |
| simscsi_sg_readwrite(sc, mode, offset); |
| else |
| simscsi_readwrite(sc, mode, offset, sc->cmnd[4]*512); |
| } |
| |
| static size_t |
| simscsi_get_disk_size (int fd) |
| { |
| struct disk_stat stat; |
| size_t bit, sectors = 0; |
| struct disk_req req; |
| char buf[512]; |
| |
| /* |
| * This is a bit kludgey: the simulator doesn't provide a direct way of determining |
| * the disk size, so we do a binary search, assuming a maximum disk size of 4GB. |
| */ |
| for (bit = (4UL << 30)/512; bit != 0; bit >>= 1) { |
| req.addr = __pa(&buf); |
| req.len = sizeof(buf); |
| ia64_ssc(fd, 1, __pa(&req), ((sectors | bit) - 1)*512, SSC_READ); |
| stat.fd = fd; |
| ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION); |
| if (stat.count == sizeof(buf)) |
| sectors |= bit; |
| } |
| return sectors - 1; /* return last valid sector number */ |
| } |
| |
| static void |
| simscsi_readwrite10 (Scsi_Cmnd *sc, int mode) |
| { |
| unsigned long offset; |
| |
| offset = ( (sc->cmnd[2] << 24) | (sc->cmnd[3] << 16) |
| | (sc->cmnd[4] << 8) | (sc->cmnd[5] << 0))*512; |
| if (sc->use_sg > 0) |
| simscsi_sg_readwrite(sc, mode, offset); |
| else |
| simscsi_readwrite(sc, mode, offset, ((sc->cmnd[7] << 8) | sc->cmnd[8])*512); |
| } |
| |
| int |
| simscsi_queuecommand (Scsi_Cmnd *sc, void (*done)(Scsi_Cmnd *)) |
| { |
| char fname[MAX_ROOT_LEN+16]; |
| size_t disk_size; |
| char *buf; |
| #if DEBUG_SIMSCSI |
| register long sp asm ("sp"); |
| |
| if (DBG) |
| printk("simscsi_queuecommand: target=%d,cmnd=%u,sc=%lu,sp=%lx,done=%p\n", |
| sc->target, sc->cmnd[0], sc->serial_number, sp, done); |
| #endif |
| |
| sc->result = DID_BAD_TARGET << 16; |
| sc->scsi_done = done; |
| if (sc->target <= 15 && sc->lun == 0) { |
| switch (sc->cmnd[0]) { |
| case INQUIRY: |
| if (sc->request_bufflen < 35) { |
| break; |
| } |
| sprintf (fname, "%s%c", simscsi_root, 'a' + sc->target); |
| desc[sc->target] = ia64_ssc(__pa(fname), SSC_READ_ACCESS|SSC_WRITE_ACCESS, |
| 0, 0, SSC_OPEN); |
| if (desc[sc->target] < 0) { |
| /* disk doesn't exist... */ |
| break; |
| } |
| buf = sc->request_buffer; |
| buf[0] = 0; /* magnetic disk */ |
| buf[1] = 0; /* not a removable medium */ |
| buf[2] = 2; /* SCSI-2 compliant device */ |
| buf[3] = 2; /* SCSI-2 response data format */ |
| buf[4] = 31; /* additional length (bytes) */ |
| buf[5] = 0; /* reserved */ |
| buf[6] = 0; /* reserved */ |
| buf[7] = 0; /* various flags */ |
| memcpy(buf + 8, "HP SIMULATED DISK 0.00", 28); |
| sc->result = GOOD; |
| break; |
| |
| case TEST_UNIT_READY: |
| sc->result = GOOD; |
| break; |
| |
| case READ_6: |
| if (desc[sc->target] < 0 ) |
| break; |
| simscsi_readwrite6(sc, SSC_READ); |
| break; |
| |
| case READ_10: |
| if (desc[sc->target] < 0 ) |
| break; |
| simscsi_readwrite10(sc, SSC_READ); |
| break; |
| |
| case WRITE_6: |
| if (desc[sc->target] < 0) |
| break; |
| simscsi_readwrite6(sc, SSC_WRITE); |
| break; |
| |
| case WRITE_10: |
| if (desc[sc->target] < 0) |
| break; |
| simscsi_readwrite10(sc, SSC_WRITE); |
| break; |
| |
| |
| case READ_CAPACITY: |
| if (desc[sc->target] < 0 || sc->request_bufflen < 8) { |
| break; |
| } |
| buf = sc->request_buffer; |
| |
| disk_size = simscsi_get_disk_size(desc[sc->target]); |
| buf[0] = (disk_size >> 24) & 0xff; |
| buf[1] = (disk_size >> 16) & 0xff; |
| buf[2] = (disk_size >> 8) & 0xff; |
| buf[3] = (disk_size >> 0) & 0xff; |
| /* set block size of 512 bytes: */ |
| buf[4] = 0; |
| buf[5] = 0; |
| buf[6] = 2; |
| buf[7] = 0; |
| sc->result = GOOD; |
| break; |
| |
| case MODE_SENSE: |
| /* sd.c uses this to determine whether disk does write-caching. */ |
| memset(sc->request_buffer, 0, 128); |
| sc->result = GOOD; |
| break; |
| |
| case START_STOP: |
| printk(KERN_ERR "START_STOP\n"); |
| break; |
| |
| default: |
| panic("simscsi: unknown SCSI command %u\n", sc->cmnd[0]); |
| } |
| } |
| if (sc->result == DID_BAD_TARGET) { |
| sc->result |= DRIVER_SENSE << 24; |
| sc->sense_buffer[0] = 0x70; |
| sc->sense_buffer[2] = 0x00; |
| } |
| if (atomic_read(&num_reqs) >= SIMSCSI_REQ_QUEUE_LEN) { |
| panic("Attempt to queue command while command is pending!!"); |
| } |
| atomic_inc(&num_reqs); |
| queue[wr].sc = sc; |
| wr = (wr + 1) % SIMSCSI_REQ_QUEUE_LEN; |
| |
| tasklet_schedule(&simscsi_tasklet); |
| return 0; |
| } |
| |
| int |
| simscsi_reset (Scsi_Cmnd *cmd, unsigned int reset_flags) |
| { |
| printk(KERN_ERR "simscsi_reset: unimplemented\n"); |
| return SCSI_RESET_SUCCESS; |
| } |
| |
| int |
| simscsi_abort (Scsi_Cmnd *cmd) |
| { |
| printk(KERN_ERR "simscsi_abort: unimplemented\n"); |
| return SCSI_ABORT_SUCCESS; |
| } |
| |
| static Scsi_Host_Template driver_template = SIMSCSI; |
| |
| #include "../drivers/scsi/scsi_module.c" |