| /* |
| * FILE NAME: ocp_ids.h |
| * |
| * BRIEF MODULE DESCRIPTION: |
| * OCP device ids based on the ideas from PCI |
| * |
| * The numbers below are almost completely arbitrary, and in fact |
| * strings might work better. -- paulus |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF |
| * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| */ |
| |
| /* |
| * Vender device |
| * [xxxx] [xxxx] |
| * |
| * Keep in order, please |
| */ |
| |
| /* Vendor IDs 0x0001 - 0xFFFF copied from pci_ids.h */ |
| |
| #define OCP_VENDOR_INVALID 0x0000 |
| #define OCP_VENDOR_ARM 0x0004 |
| #define OCP_VENDOR_IBM 0x1014 |
| #define OCP_VENDOR_MOTOROLA 0x1057 |
| #define OCP_VENDOR_XILINX 0x10ee |
| #define OCP_VENDOR_UNKNOWN 0xFFFF |
| |
| /* device identification */ |
| |
| /* define type */ |
| #define OCP_FUNC_INVALID 0x0000 |
| |
| /* system 0x0001 - 0x001F */ |
| |
| /* Timers 0x0020 - 0x002F */ |
| |
| /* Serial 0x0030 - 0x006F*/ |
| #define OCP_FUNC_16550 0x0031 |
| #define OCP_FUNC_IIC 0x0032 |
| #define OCP_FUNC_USB 0x0033 |
| |
| /* Memory devices 0x0090 - 0x009F */ |
| #define OCP_FUNC_MAL 0x0090 |
| #define OCP_FUNC_DMA 0x0091 |
| |
| /* Additional data */ |
| struct ocp_func_mal_data { |
| int num_tx_chans; /* Number of TX channels */ |
| int num_rx_chans; /* Number of RX channels */ |
| }; |
| |
| /* Display 0x00A0 - 0x00AF */ |
| |
| /* Sound 0x00B0 - 0x00BF */ |
| |
| /* Mass Storage 0x00C0 - 0xxCF */ |
| #define OCP_FUNC_IDE 0x00C0 |
| |
| /* Misc 0x00D0 - 0x00DF*/ |
| #define OCP_FUNC_GPIO 0x00D0 |
| #define OCP_FUNC_ZMII 0x00D1 |
| #define OCP_FUNC_PERFMON 0x00D2 /* Performance Monitor */ |
| |
| /* Network 0x0200 - 0x02FF */ |
| #define OCP_FUNC_EMAC 0x0200 |
| #define OCP_FUNC_GFAR 0x0201 /* TSEC & FEC */ |
| |
| /* Additional data |
| * |
| * Note about mdio_idx: When you have a zmii, it's usually |
| * not necessary, it covers the case of the 405EP which has |
| * the MDIO lines on EMAC0 only |
| */ |
| struct ocp_func_emac_data { |
| int zmii_idx; /* ZMII device index or -1 */ |
| int zmii_mux; /* ZMII input of this EMAC */ |
| int mal_idx; /* MAL device index */ |
| int mal_rx_chan; /* MAL rx channel number */ |
| int mal_tx1_chan; /* MAL tx channel 1 number */ |
| int mal_tx2_chan; /* MAL tx channel 2 number */ |
| int wol_irq; /* WOL interrupt */ |
| int mdio_idx; /* EMAC idx of MDIO master or -1 */ |
| }; |
| |
| /* Bridge devices 0xE00 - 0xEFF */ |
| #define OCP_FUNC_OPB 0x0E00 |
| |
| #define OCP_FUNC_UNKNOWN 0xFFFF |