| /* |
| * linux/drivers/ide/ide-disk.c Version 1.18 Mar 05, 2003 |
| * |
| * Copyright (C) 1994-1998 Linus Torvalds & authors (see below) |
| * Copyright (C) 1998-2002 Linux ATA Developemt |
| * Andre Hedrick <andre@linux-ide.org> |
| * Copyright (C) 2003 Red Hat <alan@redhat.com> |
| * |
| * |
| */ |
| |
| /* |
| * Mostly written by Mark Lord <mlord@pobox.com> |
| * and Gadi Oxman <gadio@netvision.net.il> |
| * and Andre Hedrick <andre@linux-ide.org> |
| * |
| * This is the IDE/ATA disk driver, as evolved from hd.c and ide.c. |
| * |
| * Version 1.00 move disk only code from ide.c to ide-disk.c |
| * support optional byte-swapping of all data |
| * Version 1.01 fix previous byte-swapping code |
| * Version 1.02 remove ", LBA" from drive identification msgs |
| * Version 1.03 fix display of id->buf_size for big-endian |
| * Version 1.04 add /proc configurable settings and S.M.A.R.T support |
| * Version 1.05 add capacity support for ATA3 >= 8GB |
| * Version 1.06 get boot-up messages to show full cyl count |
| * Version 1.07 disable door-locking if it fails |
| * Version 1.08 fixed CHS/LBA translations for ATA4 > 8GB, |
| * process of adding new ATA4 compliance. |
| * fixed problems in allowing fdisk to see |
| * the entire disk. |
| * Version 1.09 added increment of rq->sector in ide_multwrite |
| * added UDMA 3/4 reporting |
| * Version 1.10 request queue changes, Ultra DMA 100 |
| * Version 1.11 added 48-bit lba |
| * Version 1.12 adding taskfile io access method |
| * Version 1.13 added standby and flush-cache for notifier |
| * Version 1.14 added acoustic-wcache |
| * Version 1.15 convert all calls to ide_raw_taskfile |
| * since args will return register content. |
| * Version 1.16 added suspend-resume-checkpower |
| * Version 1.17 do flush on standy, do flush on ATA < ATA6 |
| * fix wcache setup. |
| */ |
| |
| #define IDEDISK_VERSION "1.17" |
| |
| #undef REALLY_SLOW_IO /* most systems can safely undef this */ |
| |
| #include <linux/config.h> |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/string.h> |
| #include <linux/kernel.h> |
| #include <linux/timer.h> |
| #include <linux/mm.h> |
| #include <linux/interrupt.h> |
| #include <linux/major.h> |
| #include <linux/errno.h> |
| #include <linux/genhd.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| |
| #define _IDE_DISK |
| |
| #include <linux/ide.h> |
| |
| #include <asm/byteorder.h> |
| #include <asm/irq.h> |
| #include <asm/uaccess.h> |
| #include <asm/io.h> |
| |
| /* FIXME: some day we shouldnt need to look in here! */ |
| |
| #include "legacy/pdc4030.h" |
| |
| static int driver_blocked; |
| |
| static inline u32 idedisk_read_24 (ide_drive_t *drive) |
| { |
| #if 0 |
| return (HWIF(drive)->INB(IDE_HCYL_REG)<<16) | |
| (HWIF(drive)->INB(IDE_LCYL_REG)<<8) | |
| HWIF(drive)->INB(IDE_SECTOR_REG); |
| #else |
| u8 hcyl = HWIF(drive)->INB(IDE_HCYL_REG); |
| u8 lcyl = HWIF(drive)->INB(IDE_LCYL_REG); |
| u8 sect = HWIF(drive)->INB(IDE_SECTOR_REG); |
| return (hcyl<<16)|(lcyl<<8)|sect; |
| #endif |
| } |
| |
| static int idedisk_end_request(ide_drive_t *drive, int uptodate); |
| |
| /* |
| * lba_capacity_is_ok() performs a sanity check on the claimed "lba_capacity" |
| * value for this drive (from its reported identification information). |
| * |
| * Returns: 1 if lba_capacity looks sensible |
| * 0 otherwise |
| * |
| * It is called only once for each drive. |
| */ |
| static int lba_capacity_is_ok (struct hd_driveid *id) |
| { |
| unsigned long lba_sects, chs_sects, head, tail; |
| |
| if ((id->command_set_2 & 0x0400) && (id->cfs_enable_2 & 0x0400)) { |
| printk("48-bit Drive: %llu \n", id->lba_capacity_2); |
| return 1; |
| } |
| |
| /* |
| * The ATA spec tells large drives to return |
| * C/H/S = 16383/16/63 independent of their size. |
| * Some drives can be jumpered to use 15 heads instead of 16. |
| * Some drives can be jumpered to use 4092 cyls instead of 16383. |
| */ |
| if ((id->cyls == 16383 |
| || (id->cyls == 4092 && id->cur_cyls == 16383)) && |
| id->sectors == 63 && |
| (id->heads == 15 || id->heads == 16) && |
| (id->lba_capacity >= 16383*63*id->heads)) |
| return 1; |
| |
| lba_sects = id->lba_capacity; |
| chs_sects = id->cyls * id->heads * id->sectors; |
| |
| /* perform a rough sanity check on lba_sects: within 10% is OK */ |
| if ((lba_sects - chs_sects) < chs_sects/10) |
| return 1; |
| |
| /* some drives have the word order reversed */ |
| head = ((lba_sects >> 16) & 0xffff); |
| tail = (lba_sects & 0xffff); |
| lba_sects = (head | (tail << 16)); |
| if ((lba_sects - chs_sects) < chs_sects/10) { |
| id->lba_capacity = lba_sects; |
| return 1; /* lba_capacity is (now) good */ |
| } |
| |
| return 0; /* lba_capacity value may be bad */ |
| } |
| |
| #ifndef CONFIG_IDE_TASKFILE_IO |
| |
| /* |
| * read_intr() is the handler for disk read/multread interrupts |
| */ |
| static ide_startstop_t read_intr (ide_drive_t *drive) |
| { |
| ide_hwif_t *hwif = HWIF(drive); |
| u32 i = 0, nsect = 0, msect = drive->mult_count; |
| struct request *rq; |
| unsigned long flags; |
| u8 stat; |
| char *to; |
| |
| /* new way for dealing with premature shared PCI interrupts */ |
| if (!OK_STAT(stat=hwif->INB(IDE_STATUS_REG),DATA_READY,BAD_R_STAT)) { |
| if (stat & (ERR_STAT|DRQ_STAT)) { |
| return DRIVER(drive)->error(drive, "read_intr", stat); |
| } |
| /* no data yet, so wait for another interrupt */ |
| ide_set_handler(drive, &read_intr, WAIT_CMD, NULL); |
| return ide_started; |
| } |
| |
| read_next: |
| rq = HWGROUP(drive)->rq; |
| if (msect) { |
| if ((nsect = rq->current_nr_sectors) > msect) |
| nsect = msect; |
| msect -= nsect; |
| } else |
| nsect = 1; |
| to = ide_map_buffer(rq, &flags); |
| taskfile_input_data(drive, to, nsect * SECTOR_WORDS); |
| |
| #ifdef DEBUG |
| printk("%s: read: sectors(%ld-%ld), buffer=0x%08lx, remaining=%ld\n", |
| drive->name, rq->sector, rq->sector+nsect-1, |
| (unsigned long) rq->buffer+(nsect<<9), rq->nr_sectors-nsect); |
| #endif |
| |
| ide_unmap_buffer(to, &flags); |
| rq->sector += nsect; |
| rq->errors = 0; |
| i = (rq->nr_sectors -= nsect); |
| if (((long)(rq->current_nr_sectors -= nsect)) <= 0) |
| idedisk_end_request(drive, 1); |
| /* |
| * Another BH Page walker and DATA INTERGRITY Questioned on ERROR. |
| * If passed back up on multimode read, BAD DATA could be ACKED |
| * to FILE SYSTEMS above ... |
| */ |
| if (i > 0) { |
| if (msect) |
| goto read_next; |
| ide_set_handler(drive, &read_intr, WAIT_CMD, NULL); |
| return ide_started; |
| } |
| return ide_stopped; |
| } |
| |
| /* |
| * write_intr() is the handler for disk write interrupts |
| */ |
| static ide_startstop_t write_intr (ide_drive_t *drive) |
| { |
| ide_hwgroup_t *hwgroup = HWGROUP(drive); |
| ide_hwif_t *hwif = HWIF(drive); |
| struct request *rq = hwgroup->rq; |
| u32 i = 0; |
| u8 stat; |
| |
| if (!OK_STAT(stat = hwif->INB(IDE_STATUS_REG), |
| DRIVE_READY, drive->bad_wstat)) { |
| printk("%s: write_intr error1: nr_sectors=%ld, stat=0x%02x\n", |
| drive->name, rq->nr_sectors, stat); |
| } else { |
| #ifdef DEBUG |
| printk("%s: write: sector %ld, buffer=0x%08lx, remaining=%ld\n", |
| drive->name, rq->sector, (unsigned long) rq->buffer, |
| rq->nr_sectors-1); |
| #endif |
| if ((rq->nr_sectors == 1) ^ ((stat & DRQ_STAT) != 0)) { |
| rq->sector++; |
| rq->errors = 0; |
| i = --rq->nr_sectors; |
| --rq->current_nr_sectors; |
| if (((long)rq->current_nr_sectors) <= 0) |
| idedisk_end_request(drive, 1); |
| if (i > 0) { |
| unsigned long flags; |
| char *to = ide_map_buffer(rq, &flags); |
| taskfile_output_data(drive, to, SECTOR_WORDS); |
| ide_unmap_buffer(to, &flags); |
| ide_set_handler(drive, &write_intr, WAIT_CMD, NULL); |
| return ide_started; |
| } |
| return ide_stopped; |
| } |
| /* the original code did this here (?) */ |
| return ide_stopped; |
| } |
| return DRIVER(drive)->error(drive, "write_intr", stat); |
| } |
| |
| /* |
| * ide_multwrite() transfers a block of up to mcount sectors of data |
| * to a drive as part of a disk multiple-sector write operation. |
| * |
| * Returns 0 on success. |
| * |
| * Note that we may be called from two contexts - the do_rw_disk context |
| * and IRQ context. The IRQ can happen any time after we've output the |
| * full "mcount" number of sectors, so we must make sure we update the |
| * state _before_ we output the final part of the data! |
| * |
| * The update and return to BH is a BLOCK Layer Fakey to get more data |
| * to satisfy the hardware atomic segment. If the hardware atomic segment |
| * is shorter or smaller than the BH segment then we should be OKAY. |
| * This is only valid if we can rewind the rq->current_nr_sectors counter. |
| */ |
| int ide_multwrite (ide_drive_t *drive, unsigned int mcount) |
| { |
| ide_hwgroup_t *hwgroup = HWGROUP(drive); |
| struct request *rq = &hwgroup->wrq; |
| |
| do { |
| char *buffer; |
| int nsect = rq->current_nr_sectors; |
| unsigned long flags; |
| |
| if (nsect > mcount) |
| nsect = mcount; |
| mcount -= nsect; |
| buffer = ide_map_buffer(rq, &flags); |
| |
| rq->sector += nsect; |
| rq->nr_sectors -= nsect; |
| rq->current_nr_sectors -= nsect; |
| |
| /* Do we move to the next bh after this? */ |
| if (!rq->current_nr_sectors) { |
| struct buffer_head *bh = rq->bh->b_reqnext; |
| |
| /* end early early we ran out of requests */ |
| if (!bh) { |
| mcount = 0; |
| } else { |
| rq->bh = bh; |
| rq->current_nr_sectors = bh->b_size >> 9; |
| rq->hard_cur_sectors = rq->current_nr_sectors; |
| rq->buffer = bh->b_data; |
| } |
| } |
| |
| /* |
| * Ok, we're all setup for the interrupt |
| * re-entering us on the last transfer. |
| */ |
| taskfile_output_data(drive, buffer, nsect<<7); |
| ide_unmap_buffer(buffer, &flags); |
| } while (mcount); |
| |
| return 0; |
| } |
| |
| /* |
| * multwrite_intr() is the handler for disk multwrite interrupts |
| */ |
| static ide_startstop_t multwrite_intr (ide_drive_t *drive) |
| { |
| ide_hwgroup_t *hwgroup = HWGROUP(drive); |
| ide_hwif_t *hwif = HWIF(drive); |
| struct request *rq = &hwgroup->wrq; |
| u32 i = 0; |
| u8 stat; |
| |
| if (OK_STAT(stat = hwif->INB(IDE_STATUS_REG), |
| DRIVE_READY, drive->bad_wstat)) { |
| if (stat & DRQ_STAT) { |
| /* |
| * The drive wants data. Remember rq is the copy |
| * of the request |
| */ |
| if (rq->nr_sectors) { |
| if (ide_multwrite(drive, drive->mult_count)) |
| return ide_stopped; |
| ide_set_handler(drive, &multwrite_intr, WAIT_CMD, NULL); |
| return ide_started; |
| } |
| } else { |
| /* |
| * If the copy has all the blocks completed then |
| * we can end the original request. |
| */ |
| if (!rq->nr_sectors) { /* all done? */ |
| rq = hwgroup->rq; |
| for (i = rq->nr_sectors; i > 0;) { |
| i -= rq->current_nr_sectors; |
| idedisk_end_request(drive, 1); |
| } |
| return ide_stopped; |
| } |
| } |
| /* the original code did this here (?) */ |
| return ide_stopped; |
| } |
| return DRIVER(drive)->error(drive, "multwrite_intr", stat); |
| } |
| |
| |
| /* |
| * __ide_do_rw_disk() issues READ and WRITE commands to a disk, |
| * using LBA if supported, or CHS otherwise, to address sectors. |
| * It also takes care of issuing special DRIVE_CMDs. |
| */ |
| |
| ide_startstop_t __ide_do_rw_disk (ide_drive_t *drive, struct request *rq, unsigned long block) |
| { |
| ide_hwif_t *hwif = HWIF(drive); |
| u8 lba48 = (drive->addressing == 1) ? 1 : 0; |
| task_ioreg_t command = WIN_NOP; |
| ata_nsector_t nsectors; |
| |
| nsectors.all = (u16) rq->nr_sectors; |
| |
| if (driver_blocked) |
| panic("Request while ide driver is blocked?"); |
| |
| if (IDE_CONTROL_REG) |
| hwif->OUTB(drive->ctl, IDE_CONTROL_REG); |
| |
| if (drive->select.b.lba) { |
| if (drive->addressing == 1) { |
| task_ioreg_t tasklets[10]; |
| |
| tasklets[0] = 0; |
| tasklets[1] = 0; |
| tasklets[2] = nsectors.b.low; |
| tasklets[3] = nsectors.b.high; |
| tasklets[4] = (task_ioreg_t) block; |
| tasklets[5] = (task_ioreg_t) (block>>8); |
| tasklets[6] = (task_ioreg_t) (block>>16); |
| tasklets[7] = (task_ioreg_t) (block>>24); |
| tasklets[8] = (task_ioreg_t) 0; |
| tasklets[9] = (task_ioreg_t) 0; |
| // tasklets[8] = (task_ioreg_t) (block>>32); |
| // tasklets[9] = (task_ioreg_t) (block>>40); |
| #ifdef DEBUG |
| printk("%s: %sing: LBAsect=%lu, sectors=%ld, " |
| "buffer=0x%08lx, LBAsect=0x%012lx\n", |
| drive->name, |
| (rq->cmd==READ)?"read":"writ", |
| block, |
| rq->nr_sectors, |
| (unsigned long) rq->buffer, |
| block); |
| printk("%s: 0x%02x%02x 0x%02x%02x%02x%02x%02x%02x\n", |
| drive->name, tasklets[3], tasklets[2], |
| tasklets[9], tasklets[8], tasklets[7], |
| tasklets[6], tasklets[5], tasklets[4]); |
| #endif |
| hwif->OUTB(tasklets[1], IDE_FEATURE_REG); |
| hwif->OUTB(tasklets[3], IDE_NSECTOR_REG); |
| hwif->OUTB(tasklets[7], IDE_SECTOR_REG); |
| hwif->OUTB(tasklets[8], IDE_LCYL_REG); |
| hwif->OUTB(tasklets[9], IDE_HCYL_REG); |
| |
| hwif->OUTB(tasklets[0], IDE_FEATURE_REG); |
| hwif->OUTB(tasklets[2], IDE_NSECTOR_REG); |
| hwif->OUTB(tasklets[4], IDE_SECTOR_REG); |
| hwif->OUTB(tasklets[5], IDE_LCYL_REG); |
| hwif->OUTB(tasklets[6], IDE_HCYL_REG); |
| hwif->OUTB(0x00|drive->select.all,IDE_SELECT_REG); |
| } else { |
| #ifdef DEBUG |
| printk("%s: %sing: LBAsect=%ld, sectors=%ld, " |
| "buffer=0x%08lx\n", |
| drive->name, (rq->cmd==READ)?"read":"writ", |
| block, rq->nr_sectors, |
| (unsigned long) rq->buffer); |
| #endif |
| hwif->OUTB(0x00, IDE_FEATURE_REG); |
| hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG); |
| hwif->OUTB(block, IDE_SECTOR_REG); |
| hwif->OUTB(block>>=8, IDE_LCYL_REG); |
| hwif->OUTB(block>>=8, IDE_HCYL_REG); |
| hwif->OUTB(((block>>8)&0x0f)|drive->select.all,IDE_SELECT_REG); |
| } |
| } else { |
| unsigned int sect,head,cyl,track; |
| track = block / drive->sect; |
| sect = block % drive->sect + 1; |
| hwif->OUTB(sect, IDE_SECTOR_REG); |
| head = track % drive->head; |
| cyl = track / drive->head; |
| |
| hwif->OUTB(0x00, IDE_FEATURE_REG); |
| hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG); |
| hwif->OUTB(cyl, IDE_LCYL_REG); |
| hwif->OUTB(cyl>>8, IDE_HCYL_REG); |
| hwif->OUTB(head|drive->select.all,IDE_SELECT_REG); |
| #ifdef DEBUG |
| printk("%s: %sing: CHS=%d/%d/%d, sectors=%ld, buffer=0x%08lx\n", |
| drive->name, (rq->cmd==READ)?"read":"writ", cyl, |
| head, sect, rq->nr_sectors, (unsigned long) rq->buffer); |
| #endif |
| } |
| |
| if (rq_data_dir(rq) == READ) { |
| #ifdef CONFIG_BLK_DEV_IDEDMA |
| if (drive->using_dma && !hwif->ide_dma_read(drive)) |
| return ide_started; |
| #endif /* CONFIG_BLK_DEV_IDEDMA */ |
| if (HWGROUP(drive)->handler != NULL) |
| BUG(); |
| |
| command = ((drive->mult_count) ? |
| ((lba48) ? WIN_MULTREAD_EXT : WIN_MULTREAD) : |
| ((lba48) ? WIN_READ_EXT : WIN_READ)); |
| |
| ide_execute_command(drive, command, &read_intr, WAIT_CMD, NULL); |
| return ide_started; |
| } else if (rq_data_dir(rq) == WRITE) { |
| ide_startstop_t startstop; |
| #ifdef CONFIG_BLK_DEV_IDEDMA |
| if (drive->using_dma && !(HWIF(drive)->ide_dma_write(drive))) |
| return ide_started; |
| #endif /* CONFIG_BLK_DEV_IDEDMA */ |
| |
| command = ((drive->mult_count) ? |
| ((lba48) ? WIN_MULTWRITE_EXT : WIN_MULTWRITE) : |
| ((lba48) ? WIN_WRITE_EXT : WIN_WRITE)); |
| hwif->OUTB(command, IDE_COMMAND_REG); |
| |
| if (ide_wait_stat(&startstop, drive, DATA_READY, |
| drive->bad_wstat, WAIT_DRQ)) { |
| printk(KERN_ERR "%s: no DRQ after issuing %s\n", |
| drive->name, |
| drive->mult_count ? "MULTWRITE" : "WRITE"); |
| return startstop; |
| } |
| if (!drive->unmask) |
| local_irq_disable(); |
| if (drive->mult_count) { |
| ide_hwgroup_t *hwgroup = HWGROUP(drive); |
| /* |
| * Ugh.. this part looks ugly because we MUST set up |
| * the interrupt handler before outputting the first block |
| * of data to be written. If we hit an error (corrupted buffer list) |
| * in ide_multwrite(), then we need to remove the handler/timer |
| * before returning. Fortunately, this NEVER happens (right?). |
| * |
| * Except when you get an error it seems... |
| * |
| * MAJOR DATA INTEGRITY BUG !!! only if we error |
| */ |
| hwgroup->wrq = *rq; /* scratchpad */ |
| ide_set_handler(drive, &multwrite_intr, WAIT_CMD, NULL); |
| if (ide_multwrite(drive, drive->mult_count)) { |
| unsigned long flags; |
| spin_lock_irqsave(&io_request_lock, flags); |
| hwgroup->handler = NULL; |
| del_timer(&hwgroup->timer); |
| spin_unlock_irqrestore(&io_request_lock, flags); |
| return ide_stopped; |
| } |
| } else { |
| unsigned long flags; |
| char *to = ide_map_buffer(rq, &flags); |
| ide_set_handler(drive, &write_intr, WAIT_CMD, NULL); |
| taskfile_output_data(drive, to, SECTOR_WORDS); |
| ide_unmap_buffer(to, &flags); |
| } |
| return ide_started; |
| } |
| printk(KERN_ERR "%s: bad command: %d\n", drive->name, rq->cmd); |
| idedisk_end_request(drive, 0); |
| return ide_stopped; |
| } |
| |
| |
| #else /* CONFIG_IDE_TASKFILE_IO */ |
| |
| static ide_startstop_t chs_rw_disk(ide_drive_t *, struct request *, unsigned long); |
| static ide_startstop_t lba_28_rw_disk(ide_drive_t *, struct request *, unsigned long); |
| static ide_startstop_t lba_48_rw_disk(ide_drive_t *, struct request *, unsigned long long); |
| |
| /* |
| * __ide_do_rw_disk() issues READ and WRITE commands to a disk, |
| * using LBA if supported, or CHS otherwise, to address sectors. |
| * It also takes care of issuing special DRIVE_CMDs. |
| */ |
| ide_startstop_t __ide_do_rw_disk (ide_drive_t *drive, struct request *rq, unsigned long block) |
| { |
| if (!blk_fs_request(rq)) { |
| printk(KERN_ERR "%s: bad command: %d\n", drive->name, rq->cmd); |
| idedisk_end_request(drive, 0); |
| return ide_stopped; |
| } |
| |
| /* |
| * 268435455 == 137439 MB or 28bit limit |
| * |
| * need to add split taskfile operations based on 28bit threshold. |
| */ |
| |
| if (drive->addressing == 1) /* 48-bit LBA */ |
| return lba_48_rw_disk(drive, rq, (unsigned long long) block); |
| if (drive->select.b.lba) /* 28-bit LBA */ |
| return lba_28_rw_disk(drive, rq, (unsigned long) block); |
| |
| /* 28-bit CHS : DIE DIE DIE piece of legacy crap!!! */ |
| return chs_rw_disk(drive, rq, (unsigned long) block); |
| } |
| |
| static task_ioreg_t get_command (ide_drive_t *drive, int cmd) |
| { |
| int lba48bit = (drive->id->cfs_enable_2 & 0x0400) ? 1 : 0; |
| |
| #if 1 |
| lba48bit = (drive->addressing == 1) ? 1 : 0; |
| #endif |
| |
| if ((cmd == READ) && (drive->using_dma)) |
| return (lba48bit) ? WIN_READDMA_EXT : WIN_READDMA; |
| else if ((cmd == READ) && (drive->mult_count)) |
| return (lba48bit) ? WIN_MULTREAD_EXT : WIN_MULTREAD; |
| else if (cmd == READ) |
| return (lba48bit) ? WIN_READ_EXT : WIN_READ; |
| else if ((cmd == WRITE) && (drive->using_dma)) |
| return (lba48bit) ? WIN_WRITEDMA_EXT : WIN_WRITEDMA; |
| else if ((cmd == WRITE) && (drive->mult_count)) |
| return (lba48bit) ? WIN_MULTWRITE_EXT : WIN_MULTWRITE; |
| else if (cmd == WRITE) |
| return (lba48bit) ? WIN_WRITE_EXT : WIN_WRITE; |
| else |
| return WIN_NOP; |
| } |
| |
| static ide_startstop_t chs_rw_disk (ide_drive_t *drive, struct request *rq, unsigned long block) |
| { |
| ide_task_t args; |
| int sectors; |
| ata_nsector_t nsectors; |
| task_ioreg_t command = get_command(drive, rq_data_dir(rq)); |
| unsigned int track = (block / drive->sect); |
| unsigned int sect = (block % drive->sect) + 1; |
| unsigned int head = (track % drive->head); |
| unsigned int cyl = (track / drive->head); |
| |
| nsectors.all = (u16) rq->nr_sectors; |
| #ifdef DEBUG |
| printk("%s: %sing: ", drive->name, (rq_data_dir(rq)==READ) ? "read" : "writ"); |
| printk("CHS=%d/%d/%d, ", cyl, head, sect); |
| printk("sectors=%ld, ", rq->nr_sectors); |
| printk("buffer=0x%08lx\n", (unsigned long) rq->buffer); |
| #endif |
| |
| memset(&args, 0, sizeof(ide_task_t)); |
| |
| sectors = (rq->nr_sectors == 256) ? 0x00 : rq->nr_sectors; |
| args.tfRegister[IDE_NSECTOR_OFFSET] = sectors; |
| args.tfRegister[IDE_SECTOR_OFFSET] = sect; |
| args.tfRegister[IDE_LCYL_OFFSET] = cyl; |
| args.tfRegister[IDE_HCYL_OFFSET] = (cyl>>8); |
| args.tfRegister[IDE_SELECT_OFFSET] = head; |
| args.tfRegister[IDE_SELECT_OFFSET] |= drive->select.all; |
| args.tfRegister[IDE_COMMAND_OFFSET] = command; |
| args.command_type = ide_cmd_type_parser(&args); |
| args.rq = (struct request *) rq; |
| rq->special = (ide_task_t *)&args; |
| return do_rw_taskfile(drive, &args); |
| } |
| |
| static ide_startstop_t lba_28_rw_disk (ide_drive_t *drive, struct request *rq, unsigned long block) |
| { |
| ide_task_t args; |
| int sectors; |
| ata_nsector_t nsectors; |
| task_ioreg_t command = get_command(drive, rq_data_dir(rq)); |
| |
| nsectors.all = (u16) rq->nr_sectors; |
| |
| #ifdef DEBUG |
| printk("%s: %sing: ", drive->name, (rq_data_dir(rq)==READ) ? "read" : "writ"); |
| printk("LBAsect=%lld, ", block); |
| printk("sectors=%ld, ", rq->nr_sectors); |
| printk("buffer=0x%08lx\n", (unsigned long) rq->buffer); |
| #endif |
| |
| memset(&args, 0, sizeof(ide_task_t)); |
| |
| sectors = (rq->nr_sectors == 256) ? 0x00 : rq->nr_sectors; |
| args.tfRegister[IDE_NSECTOR_OFFSET] = sectors; |
| args.tfRegister[IDE_SECTOR_OFFSET] = block; |
| args.tfRegister[IDE_LCYL_OFFSET] = (block>>=8); |
| args.tfRegister[IDE_HCYL_OFFSET] = (block>>=8); |
| args.tfRegister[IDE_SELECT_OFFSET] = ((block>>8)&0x0f); |
| args.tfRegister[IDE_SELECT_OFFSET] |= drive->select.all; |
| args.tfRegister[IDE_COMMAND_OFFSET] = command; |
| args.command_type = ide_cmd_type_parser(&args); |
| args.rq = (struct request *) rq; |
| rq->special = (ide_task_t *)&args; |
| return do_rw_taskfile(drive, &args); |
| } |
| |
| /* |
| * 268435455 == 137439 MB or 28bit limit |
| * 320173056 == 163929 MB or 48bit addressing |
| * 1073741822 == 549756 MB or 48bit addressing fake drive |
| */ |
| |
| static ide_startstop_t lba_48_rw_disk (ide_drive_t *drive, struct request *rq, unsigned long long block) |
| { |
| ide_task_t args; |
| int sectors; |
| ata_nsector_t nsectors; |
| task_ioreg_t command = get_command(drive, rq_data_dir(rq)); |
| |
| nsectors.all = (u16) rq->nr_sectors; |
| |
| #ifdef DEBUG |
| printk("%s: %sing: ", drive->name, (rq_data_dir(rq)==READ) ? "read" : "writ"); |
| printk("LBAsect=%lld, ", block); |
| printk("sectors=%ld, ", rq->nr_sectors); |
| printk("buffer=0x%08lx\n", (unsigned long) rq->buffer); |
| #endif |
| |
| memset(&args, 0, sizeof(ide_task_t)); |
| |
| sectors = (rq->nr_sectors == 65536) ? 0 : rq->nr_sectors; |
| args.tfRegister[IDE_NSECTOR_OFFSET] = sectors; |
| args.tfRegister[IDE_SECTOR_OFFSET] = block; /* low lba */ |
| args.tfRegister[IDE_LCYL_OFFSET] = (block>>=8); /* mid lba */ |
| args.tfRegister[IDE_HCYL_OFFSET] = (block>>=8); /* hi lba */ |
| args.tfRegister[IDE_SELECT_OFFSET] = drive->select.all; |
| args.tfRegister[IDE_COMMAND_OFFSET] = command; |
| args.hobRegister[IDE_NSECTOR_OFFSET_HOB]= sectors >> 8; |
| args.hobRegister[IDE_SECTOR_OFFSET_HOB] = (block>>=8); /* low lba */ |
| args.hobRegister[IDE_LCYL_OFFSET_HOB] = (block>>=8); /* mid lba */ |
| args.hobRegister[IDE_HCYL_OFFSET_HOB] = (block>>=8); /* hi lba */ |
| args.hobRegister[IDE_SELECT_OFFSET_HOB] = drive->select.all; |
| args.hobRegister[IDE_CONTROL_OFFSET_HOB]= (drive->ctl|0x80); |
| args.command_type = ide_cmd_type_parser(&args); |
| args.rq = (struct request *) rq; |
| rq->special = (ide_task_t *)&args; |
| return do_rw_taskfile(drive, &args); |
| } |
| |
| #endif /* CONFIG_IDE_TASKFILE_IO */ |
| |
| static ide_startstop_t ide_do_rw_disk (ide_drive_t *drive, struct request *rq, unsigned long block) |
| { |
| ide_hwif_t *hwif = HWIF(drive); |
| if (hwif->rw_disk) |
| return hwif->rw_disk(drive, rq, block); |
| else |
| return __ide_do_rw_disk(drive, rq, block); |
| } |
| |
| EXPORT_SYMBOL_GPL(__ide_do_rw_disk); |
| |
| static int idedisk_open (struct inode *inode, struct file *filp, ide_drive_t *drive) |
| { |
| MOD_INC_USE_COUNT; |
| if (drive->removable && drive->usage == 1) { |
| ide_task_t args; |
| int cf; |
| memset(&args, 0, sizeof(ide_task_t)); |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_DOORLOCK; |
| args.command_type = ide_cmd_type_parser(&args); |
| check_disk_change(inode->i_rdev); |
| /* |
| * Ignore the return code from door_lock, |
| * since the open() has already succeeded, |
| * and the door_lock is irrelevant at this point. |
| */ |
| if (drive->doorlocking && ide_raw_taskfile(drive, &args, NULL)) |
| drive->doorlocking = 0; |
| drive->wcache = 0; |
| /* Cache enabled ? */ |
| if (drive->id->csfo & 1) |
| drive->wcache = 1; |
| /* Cache command set available ? */ |
| if (drive->id->cfs_enable_1 & (1<<5)) |
| drive->wcache = 1; |
| /* ATA6 cache extended commands */ |
| cf = drive->id->command_set_2 >> 24; |
| if((cf & 0xC0) == 0x40 && (cf & 0x30) != 0) |
| drive->wcache = 1; |
| } |
| return 0; |
| } |
| |
| static int do_idedisk_flushcache(ide_drive_t *drive); |
| |
| static int ide_cacheflush_p(ide_drive_t *drive) |
| { |
| if(drive->wcache) |
| { |
| if (do_idedisk_flushcache(drive)) |
| { |
| printk (KERN_INFO "%s: Write Cache FAILED Flushing!\n", |
| drive->name); |
| return -EIO; |
| } |
| return 1; |
| } |
| return 0; |
| } |
| |
| static void idedisk_release (struct inode *inode, struct file *filp, ide_drive_t *drive) |
| { |
| if (drive->removable && !drive->usage) { |
| ide_task_t args; |
| memset(&args, 0, sizeof(ide_task_t)); |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_DOORUNLOCK; |
| args.command_type = ide_cmd_type_parser(&args); |
| invalidate_bdev(inode->i_bdev, 0); |
| if (drive->doorlocking && ide_raw_taskfile(drive, &args, NULL)) |
| drive->doorlocking = 0; |
| } |
| ide_cacheflush_p(drive); |
| MOD_DEC_USE_COUNT; |
| } |
| |
| static int idedisk_media_change (ide_drive_t *drive) |
| { |
| /* if removable, always assume it was changed */ |
| return drive->removable; |
| } |
| |
| static void idedisk_revalidate (ide_drive_t *drive) |
| { |
| grok_partitions(HWIF(drive)->gd, drive->select.b.unit, |
| 1<<PARTN_BITS, |
| current_capacity(drive)); |
| } |
| |
| static int idedisk_end_request (ide_drive_t *drive, int uptodate) |
| { |
| struct request *rq; |
| unsigned long flags; |
| int ret = 1; |
| |
| spin_lock_irqsave(&io_request_lock, flags); |
| rq = HWGROUP(drive)->rq; |
| |
| /* |
| * decide whether to reenable DMA -- 3 is a random magic for now, |
| * if we DMA timeout more than 3 times, just stay in PIO |
| */ |
| if (drive->state == DMA_PIO_RETRY && drive->retry_pio <= 3) { |
| drive->state = 0; |
| HWGROUP(drive)->hwif->ide_dma_on(drive); |
| } |
| |
| if (!end_that_request_first(rq, uptodate, drive->name)) { |
| add_blkdev_randomness(MAJOR(rq->rq_dev)); |
| blkdev_dequeue_request(rq); |
| HWGROUP(drive)->rq = NULL; |
| end_that_request_last(rq); |
| ret = 0; |
| } |
| |
| spin_unlock_irqrestore(&io_request_lock, flags); |
| return ret; |
| } |
| |
| static u8 idedisk_dump_status (ide_drive_t *drive, const char *msg, u8 stat) |
| { |
| ide_hwif_t *hwif = HWIF(drive); |
| unsigned long flags; |
| u8 err = 0; |
| |
| local_irq_set(flags); |
| printk("%s: %s: status=0x%02x", drive->name, msg, stat); |
| #if FANCY_STATUS_DUMPS |
| printk(" { "); |
| if (stat & BUSY_STAT) |
| printk("Busy "); |
| else { |
| if (stat & READY_STAT) printk("DriveReady "); |
| if (stat & WRERR_STAT) printk("DeviceFault "); |
| if (stat & SEEK_STAT) printk("SeekComplete "); |
| if (stat & DRQ_STAT) printk("DataRequest "); |
| if (stat & ECC_STAT) printk("CorrectedError "); |
| if (stat & INDEX_STAT) printk("Index "); |
| if (stat & ERR_STAT) printk("Error "); |
| } |
| printk("}"); |
| #endif /* FANCY_STATUS_DUMPS */ |
| printk("\n"); |
| if ((stat & (BUSY_STAT|ERR_STAT)) == ERR_STAT) { |
| err = hwif->INB(IDE_ERROR_REG); |
| printk("%s: %s: error=0x%02x", drive->name, msg, err); |
| #if FANCY_STATUS_DUMPS |
| printk(" { "); |
| if (err & ABRT_ERR) printk("DriveStatusError "); |
| if (err & ICRC_ERR) |
| printk("Bad%s ", (err & ABRT_ERR) ? "CRC" : "Sector"); |
| if (err & ECC_ERR) printk("UncorrectableError "); |
| if (err & ID_ERR) printk("SectorIdNotFound "); |
| if (err & TRK0_ERR) printk("TrackZeroNotFound "); |
| if (err & MARK_ERR) printk("AddrMarkNotFound "); |
| printk("}"); |
| if ((err & (BBD_ERR | ABRT_ERR)) == BBD_ERR || |
| (err & (ECC_ERR|ID_ERR|MARK_ERR))) { |
| if (drive->addressing == 1) { |
| __u64 sectors = 0; |
| u32 low = 0, high = 0; |
| low = idedisk_read_24(drive); |
| hwif->OUTB(drive->ctl|0x80, IDE_CONTROL_REG); |
| high = idedisk_read_24(drive); |
| sectors = ((__u64)high << 24) | low; |
| printk(", LBAsect=%llu, high=%d, low=%d", |
| (unsigned long long) sectors, |
| high, low); |
| } else { |
| u8 cur = hwif->INB(IDE_SELECT_REG); |
| if (cur & 0x40) { /* using LBA? */ |
| printk(", LBAsect=%ld", (unsigned long) |
| ((cur&0xf)<<24) |
| |(hwif->INB(IDE_HCYL_REG)<<16) |
| |(hwif->INB(IDE_LCYL_REG)<<8) |
| | hwif->INB(IDE_SECTOR_REG)); |
| } else { |
| printk(", CHS=%d/%d/%d", |
| (hwif->INB(IDE_HCYL_REG)<<8) + |
| hwif->INB(IDE_LCYL_REG), |
| cur & 0xf, |
| hwif->INB(IDE_SECTOR_REG)); |
| } |
| } |
| if (HWGROUP(drive) && HWGROUP(drive)->rq) |
| printk(", sector=%ld", |
| HWGROUP(drive)->rq->sector); |
| } |
| } |
| #endif /* FANCY_STATUS_DUMPS */ |
| printk("\n"); |
| local_irq_restore(flags); |
| return err; |
| } |
| |
| ide_startstop_t idedisk_error (ide_drive_t *drive, const char *msg, u8 stat) |
| { |
| ide_hwif_t *hwif; |
| struct request *rq; |
| u8 err; |
| int i = (drive->mult_count ? drive->mult_count : 1) * SECTOR_WORDS; |
| |
| err = idedisk_dump_status(drive, msg, stat); |
| |
| if (drive == NULL || (rq = HWGROUP(drive)->rq) == NULL) |
| return ide_stopped; |
| |
| hwif = HWIF(drive); |
| /* retry only "normal" I/O: */ |
| switch (rq->cmd) { |
| case IDE_DRIVE_CMD: |
| case IDE_DRIVE_TASK: |
| case IDE_DRIVE_TASKFILE: |
| rq->errors = 1; |
| ide_end_drive_cmd(drive, stat, err); |
| return ide_stopped; |
| #if 0 |
| case IDE_DRIVE_TASKFILE: |
| rq->errors = 1; |
| ide_end_taskfile(drive, stat, err); |
| return ide_stopped; |
| #endif |
| default: |
| break; |
| } |
| |
| if (stat & BUSY_STAT || ((stat & WRERR_STAT) && !drive->nowerr)) { |
| /* other bits are useless when BUSY */ |
| rq->errors |= ERROR_RESET; |
| } else if (stat & ERR_STAT) { |
| /* err has different meaning on cdrom and tape */ |
| if (err == ABRT_ERR) { |
| if (drive->select.b.lba && |
| /* some newer drives don't support WIN_SPECIFY */ |
| hwif->INB(IDE_COMMAND_REG) == WIN_SPECIFY) |
| return ide_stopped; |
| } else if ((err & BAD_CRC) == BAD_CRC) { |
| /* UDMA crc error, just retry the operation */ |
| drive->crc_count++; |
| } else if (err & (BBD_ERR | ECC_ERR)) { |
| /* retries won't help these */ |
| rq->errors = ERROR_MAX; |
| } else if (err & TRK0_ERR) { |
| /* help it find track zero */ |
| rq->errors |= ERROR_RECAL; |
| } |
| } |
| if ((stat & DRQ_STAT) && rq_data_dir(rq) == READ) { |
| /* |
| * try_to_flush_leftover_data() is invoked in response to |
| * a drive unexpectedly having its DRQ_STAT bit set. As |
| * an alternative to resetting the drive, this routine |
| * tries to clear the condition by read a sector's worth |
| * of data from the drive. Of course, this may not help |
| * if the drive is *waiting* for data from *us*. |
| */ |
| while (i > 0) { |
| u32 buffer[16]; |
| unsigned int wcount = (i > 16) ? 16 : i; |
| i -= wcount; |
| taskfile_input_data(drive, buffer, wcount); |
| } |
| } |
| if (hwif->INB(IDE_STATUS_REG) & (BUSY_STAT|DRQ_STAT)) { |
| /* force an abort */ |
| hwif->OUTB(WIN_IDLEIMMEDIATE,IDE_COMMAND_REG); |
| } |
| if (rq->errors >= ERROR_MAX) |
| DRIVER(drive)->end_request(drive, 0); |
| else { |
| if ((rq->errors & ERROR_RESET) == ERROR_RESET) { |
| ++rq->errors; |
| return ide_do_reset(drive); |
| } |
| if ((rq->errors & ERROR_RECAL) == ERROR_RECAL) |
| drive->special.b.recalibrate = 1; |
| ++rq->errors; |
| } |
| return ide_stopped; |
| } |
| |
| ide_startstop_t idedisk_abort(ide_drive_t *drive, const char *msg) |
| { |
| ide_hwif_t *hwif; |
| struct request *rq; |
| |
| if (drive == NULL || (rq = HWGROUP(drive)->rq) == NULL) |
| return ide_stopped; |
| |
| hwif = HWIF(drive); |
| /* retry only "normal" I/O: */ |
| switch (rq->cmd) { |
| case IDE_DRIVE_CMD: |
| case IDE_DRIVE_TASK: |
| case IDE_DRIVE_TASKFILE: |
| rq->errors = 1; |
| ide_end_drive_cmd(drive, BUSY_STAT, 0); |
| return ide_stopped; |
| #if 0 |
| case IDE_DRIVE_TASKFILE: |
| rq->errors = 1; |
| ide_end_taskfile(drive, BUSY_STAT, 0); |
| return ide_stopped; |
| #endif |
| default: |
| break; |
| } |
| |
| rq->errors |= ERROR_RESET; |
| DRIVER(drive)->end_request(drive, 0); |
| return ide_stopped; |
| } |
| |
| /* |
| * Queries for true maximum capacity of the drive. |
| * Returns maximum LBA address (> 0) of the drive, 0 if failed. |
| */ |
| static unsigned long idedisk_read_native_max_address(ide_drive_t *drive) |
| { |
| ide_task_t args; |
| unsigned long addr = 0; |
| |
| /* Create IDE/ATA command request structure */ |
| memset(&args, 0, sizeof(ide_task_t)); |
| args.tfRegister[IDE_SELECT_OFFSET] = 0x40; |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_READ_NATIVE_MAX; |
| args.command_type = ide_cmd_type_parser(&args); |
| /* submit command request */ |
| ide_raw_taskfile(drive, &args, NULL); |
| |
| /* if OK, compute maximum address value */ |
| if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) { |
| addr = ((args.tfRegister[IDE_SELECT_OFFSET] & 0x0f) << 24) |
| | ((args.tfRegister[ IDE_HCYL_OFFSET] ) << 16) |
| | ((args.tfRegister[ IDE_LCYL_OFFSET] ) << 8) |
| | ((args.tfRegister[IDE_SECTOR_OFFSET] )); |
| } |
| addr++; /* since the return value is (maxlba - 1), we add 1 */ |
| return addr; |
| } |
| |
| static unsigned long long idedisk_read_native_max_address_ext(ide_drive_t *drive) |
| { |
| ide_task_t args; |
| unsigned long long addr = 0; |
| |
| /* Create IDE/ATA command request structure */ |
| memset(&args, 0, sizeof(ide_task_t)); |
| |
| args.tfRegister[IDE_SELECT_OFFSET] = 0x40; |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_READ_NATIVE_MAX_EXT; |
| args.command_type = ide_cmd_type_parser(&args); |
| /* submit command request */ |
| ide_raw_taskfile(drive, &args, NULL); |
| |
| /* if OK, compute maximum address value */ |
| if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) { |
| u32 high = ((args.hobRegister[IDE_HCYL_OFFSET_HOB])<<16) | |
| ((args.hobRegister[IDE_LCYL_OFFSET_HOB])<<8) | |
| (args.hobRegister[IDE_SECTOR_OFFSET_HOB]); |
| u32 low = ((args.tfRegister[IDE_HCYL_OFFSET])<<16) | |
| ((args.tfRegister[IDE_LCYL_OFFSET])<<8) | |
| (args.tfRegister[IDE_SECTOR_OFFSET]); |
| addr = ((__u64)high << 24) | low; |
| } |
| addr++; /* since the return value is (maxlba - 1), we add 1 */ |
| return addr; |
| } |
| |
| #ifdef CONFIG_IDEDISK_STROKE |
| /* |
| * Sets maximum virtual LBA address of the drive. |
| * Returns new maximum virtual LBA address (> 0) or 0 on failure. |
| */ |
| static unsigned long idedisk_set_max_address(ide_drive_t *drive, unsigned long addr_req) |
| { |
| ide_task_t args; |
| unsigned long addr_set = 0; |
| |
| addr_req--; |
| /* Create IDE/ATA command request structure */ |
| memset(&args, 0, sizeof(ide_task_t)); |
| args.tfRegister[IDE_SECTOR_OFFSET] = ((addr_req >> 0) & 0xff); |
| args.tfRegister[IDE_LCYL_OFFSET] = ((addr_req >> 8) & 0xff); |
| args.tfRegister[IDE_HCYL_OFFSET] = ((addr_req >> 16) & 0xff); |
| args.tfRegister[IDE_SELECT_OFFSET] = ((addr_req >> 24) & 0x0f) | 0x40; |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SET_MAX; |
| args.command_type = ide_cmd_type_parser(&args); |
| /* submit command request */ |
| ide_raw_taskfile(drive, &args, NULL); |
| /* if OK, read new maximum address value */ |
| if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) { |
| addr_set = ((args.tfRegister[IDE_SELECT_OFFSET] & 0x0f) << 24) |
| | ((args.tfRegister[ IDE_HCYL_OFFSET] ) << 16) |
| | ((args.tfRegister[ IDE_LCYL_OFFSET] ) << 8) |
| | ((args.tfRegister[IDE_SECTOR_OFFSET] )); |
| } |
| addr_set++; |
| return addr_set; |
| } |
| |
| static unsigned long long idedisk_set_max_address_ext(ide_drive_t *drive, unsigned long long addr_req) |
| { |
| ide_task_t args; |
| unsigned long long addr_set = 0; |
| |
| addr_req--; |
| /* Create IDE/ATA command request structure */ |
| memset(&args, 0, sizeof(ide_task_t)); |
| args.tfRegister[IDE_SECTOR_OFFSET] = ((addr_req >> 0) & 0xff); |
| args.tfRegister[IDE_LCYL_OFFSET] = ((addr_req >>= 8) & 0xff); |
| args.tfRegister[IDE_HCYL_OFFSET] = ((addr_req >>= 8) & 0xff); |
| args.tfRegister[IDE_SELECT_OFFSET] = 0x40; |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SET_MAX_EXT; |
| args.hobRegister[IDE_SECTOR_OFFSET_HOB] = ((addr_req >>= 8) & 0xff); |
| args.hobRegister[IDE_LCYL_OFFSET_HOB] = ((addr_req >>= 8) & 0xff); |
| args.hobRegister[IDE_HCYL_OFFSET_HOB] = ((addr_req >>= 8) & 0xff); |
| args.hobRegister[IDE_SELECT_OFFSET_HOB] = 0x40; |
| args.hobRegister[IDE_CONTROL_OFFSET_HOB]= (drive->ctl|0x80); |
| args.command_type = ide_cmd_type_parser(&args); |
| /* submit command request */ |
| ide_raw_taskfile(drive, &args, NULL); |
| /* if OK, compute maximum address value */ |
| if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) { |
| u32 high = ((args.hobRegister[IDE_HCYL_OFFSET_HOB])<<16) | |
| ((args.hobRegister[IDE_LCYL_OFFSET_HOB])<<8) | |
| (args.hobRegister[IDE_SECTOR_OFFSET_HOB]); |
| u32 low = ((args.tfRegister[IDE_HCYL_OFFSET])<<16) | |
| ((args.tfRegister[IDE_LCYL_OFFSET])<<8) | |
| (args.tfRegister[IDE_SECTOR_OFFSET]); |
| addr_set = ((__u64)high << 24) | low; |
| } |
| return addr_set; |
| } |
| |
| #endif /* CONFIG_IDEDISK_STROKE */ |
| |
| /* |
| * Tests if the drive supports Host Protected Area feature. |
| * Returns true if supported, false otherwise. |
| */ |
| static inline int idedisk_supports_host_protected_area(ide_drive_t *drive) |
| { |
| int flag = (drive->id->cfs_enable_1 & 0x0400) ? 1 : 0; |
| if (flag) |
| printk("%s: host protected area => %d\n", drive->name, flag); |
| return flag; |
| } |
| |
| /* |
| * Compute drive->capacity, the full capacity of the drive |
| * Called with drive->id != NULL. |
| * |
| * To compute capacity, this uses either of |
| * |
| * 1. CHS value set by user (whatever user sets will be trusted) |
| * 2. LBA value from target drive (require new ATA feature) |
| * 3. LBA value from system BIOS (new one is OK, old one may break) |
| * 4. CHS value from system BIOS (traditional style) |
| * |
| * in above order (i.e., if value of higher priority is available, |
| * reset will be ignored). |
| */ |
| #define IDE_STROKE_LIMIT (32000*1024*2) |
| static void init_idedisk_capacity (ide_drive_t *drive) |
| { |
| struct hd_driveid *id = drive->id; |
| unsigned long capacity = drive->cyl * drive->head * drive->sect; |
| int have_setmax = idedisk_supports_host_protected_area(drive); |
| unsigned long set_max = |
| (have_setmax ? idedisk_read_native_max_address(drive) : 0); |
| unsigned long long capacity_2 = capacity; |
| unsigned long long set_max_ext; |
| |
| drive->capacity48 = 0; |
| drive->select.b.lba = 0; |
| |
| if (id->cfs_enable_2 & 0x0400) { |
| capacity_2 = id->lba_capacity_2; |
| if (!drive->forced_geom) { |
| drive->bios_head = 255; |
| drive->bios_sect = 63; |
| } |
| drive->head = drive->bios_head; |
| drive->sect = drive->bios_sect; |
| drive->cyl = (unsigned int) capacity_2 / (drive->head * drive->sect); |
| drive->select.b.lba = 1; |
| set_max_ext = idedisk_read_native_max_address_ext(drive); |
| if (set_max_ext > capacity_2 && capacity_2 > IDE_STROKE_LIMIT) { |
| #ifdef CONFIG_IDEDISK_STROKE |
| set_max_ext = idedisk_read_native_max_address_ext(drive); |
| set_max_ext = idedisk_set_max_address_ext(drive, set_max_ext); |
| if (set_max_ext) { |
| drive->capacity48 = capacity_2 = set_max_ext; |
| drive->cyl = (unsigned int) set_max_ext / (drive->head * drive->sect); |
| drive->select.b.lba = 1; |
| drive->id->lba_capacity_2 = capacity_2; |
| } |
| #else /* !CONFIG_IDEDISK_STROKE */ |
| printk(KERN_INFO "%s: setmax_ext LBA %llu, native %llu\n", |
| drive->name, set_max_ext, capacity_2); |
| #endif /* CONFIG_IDEDISK_STROKE */ |
| } |
| drive->cyl = (unsigned int) capacity_2 / (drive->head * drive->sect); |
| drive->bios_cyl = drive->cyl; |
| drive->capacity48 = capacity_2; |
| drive->capacity = (unsigned long) capacity_2; |
| goto check_capacity48; |
| /* Determine capacity, and use LBA if the drive properly supports it */ |
| } else if ((id->capability & 2) && lba_capacity_is_ok(id)) { |
| capacity = id->lba_capacity; |
| drive->cyl = capacity / (drive->head * drive->sect); |
| drive->select.b.lba = 1; |
| } |
| |
| if (set_max > capacity && capacity > IDE_STROKE_LIMIT) { |
| #ifdef CONFIG_IDEDISK_STROKE |
| set_max = idedisk_read_native_max_address(drive); |
| set_max = idedisk_set_max_address(drive, set_max); |
| if (set_max) { |
| drive->capacity = capacity = set_max; |
| drive->cyl = set_max / (drive->head * drive->sect); |
| drive->select.b.lba = 1; |
| drive->id->lba_capacity = capacity; |
| } |
| #else /* !CONFIG_IDEDISK_STROKE */ |
| printk(KERN_INFO "%s: setmax LBA %lu, native %lu\n", |
| drive->name, set_max, capacity); |
| #endif /* CONFIG_IDEDISK_STROKE */ |
| } |
| |
| drive->capacity = capacity; |
| |
| if ((id->command_set_2 & 0x0400) && (id->cfs_enable_2 & 0x0400)) { |
| drive->capacity48 = id->lba_capacity_2; |
| drive->head = 255; |
| drive->sect = 63; |
| drive->cyl = (unsigned long)(drive->capacity48) / (drive->head * drive->sect); |
| } |
| |
| check_capacity48: |
| /* Limit disk size to 137GB if LBA48 addressing is not supported */ |
| if (drive->addressing == 0 && drive->capacity48 > (1ULL)<<28) { |
| printk("%s: cannot use LBA48 - capacity reset " |
| "from %llu to %llu\n", |
| drive->name, drive->capacity48, (1ULL)<<28); |
| drive->capacity48 = (1ULL)<<28; |
| } |
| } |
| |
| static unsigned long idedisk_capacity (ide_drive_t *drive) |
| { |
| if (drive->id->cfs_enable_2 & 0x0400) |
| return (drive->capacity48 - drive->sect0); |
| return (drive->capacity - drive->sect0); |
| } |
| |
| static ide_startstop_t idedisk_special (ide_drive_t *drive) |
| { |
| special_t *s = &drive->special; |
| |
| if (s->b.set_geometry) { |
| s->b.set_geometry = 0; |
| if (!IS_PDC4030_DRIVE) { |
| ide_task_t args; |
| memset(&args, 0, sizeof(ide_task_t)); |
| args.tfRegister[IDE_NSECTOR_OFFSET] = drive->sect; |
| args.tfRegister[IDE_SECTOR_OFFSET] = drive->sect; |
| args.tfRegister[IDE_LCYL_OFFSET] = drive->cyl; |
| args.tfRegister[IDE_HCYL_OFFSET] = drive->cyl>>8; |
| args.tfRegister[IDE_SELECT_OFFSET] = ((drive->head-1)|drive->select.all)&0xBF; |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SPECIFY; |
| args.command_type = ide_cmd_type_parser(&args); |
| do_rw_taskfile(drive, &args); |
| } |
| } else if (s->b.recalibrate) { |
| s->b.recalibrate = 0; |
| if (!IS_PDC4030_DRIVE) { |
| ide_task_t args; |
| memset(&args, 0, sizeof(ide_task_t)); |
| args.tfRegister[IDE_NSECTOR_OFFSET] = drive->sect; |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_RESTORE; |
| args.command_type = ide_cmd_type_parser(&args); |
| do_rw_taskfile(drive, &args); |
| } |
| } else if (s->b.set_multmode) { |
| s->b.set_multmode = 0; |
| if (drive->mult_req > drive->id->max_multsect) |
| drive->mult_req = drive->id->max_multsect; |
| if (!IS_PDC4030_DRIVE) { |
| ide_task_t args; |
| memset(&args, 0, sizeof(ide_task_t)); |
| args.tfRegister[IDE_NSECTOR_OFFSET] = drive->mult_req; |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SETMULT; |
| args.command_type = ide_cmd_type_parser(&args); |
| do_rw_taskfile(drive, &args); |
| } |
| } else if (s->all) { |
| int special = s->all; |
| s->all = 0; |
| printk(KERN_ERR "%s: bad special flag: 0x%02x\n", drive->name, special); |
| return ide_stopped; |
| } |
| return IS_PDC4030_DRIVE ? ide_stopped : ide_started; |
| } |
| |
| static void idedisk_pre_reset (ide_drive_t *drive) |
| { |
| int legacy = (drive->id->cfs_enable_2 & 0x0400) ? 0 : 1; |
| |
| drive->special.all = 0; |
| drive->special.b.set_geometry = legacy; |
| drive->special.b.recalibrate = legacy; |
| if (OK_TO_RESET_CONTROLLER) |
| drive->mult_count = 0; |
| if (!drive->keep_settings && !drive->using_dma) |
| drive->mult_req = 0; |
| if (drive->mult_req != drive->mult_count) |
| drive->special.b.set_multmode = 1; |
| } |
| |
| #ifdef CONFIG_PROC_FS |
| |
| static int smart_enable(ide_drive_t *drive) |
| { |
| ide_task_t args; |
| |
| memset(&args, 0, sizeof(ide_task_t)); |
| args.tfRegister[IDE_FEATURE_OFFSET] = SMART_ENABLE; |
| args.tfRegister[IDE_LCYL_OFFSET] = SMART_LCYL_PASS; |
| args.tfRegister[IDE_HCYL_OFFSET] = SMART_HCYL_PASS; |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SMART; |
| args.command_type = ide_cmd_type_parser(&args); |
| return ide_raw_taskfile(drive, &args, NULL); |
| } |
| |
| static int get_smart_values(ide_drive_t *drive, u8 *buf) |
| { |
| ide_task_t args; |
| |
| memset(&args, 0, sizeof(ide_task_t)); |
| args.tfRegister[IDE_FEATURE_OFFSET] = SMART_READ_VALUES; |
| args.tfRegister[IDE_NSECTOR_OFFSET] = 0x01; |
| args.tfRegister[IDE_LCYL_OFFSET] = SMART_LCYL_PASS; |
| args.tfRegister[IDE_HCYL_OFFSET] = SMART_HCYL_PASS; |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SMART; |
| args.command_type = ide_cmd_type_parser(&args); |
| (void) smart_enable(drive); |
| return ide_raw_taskfile(drive, &args, buf); |
| } |
| |
| static int get_smart_thresholds(ide_drive_t *drive, u8 *buf) |
| { |
| ide_task_t args; |
| memset(&args, 0, sizeof(ide_task_t)); |
| args.tfRegister[IDE_FEATURE_OFFSET] = SMART_READ_THRESHOLDS; |
| args.tfRegister[IDE_NSECTOR_OFFSET] = 0x01; |
| args.tfRegister[IDE_LCYL_OFFSET] = SMART_LCYL_PASS; |
| args.tfRegister[IDE_HCYL_OFFSET] = SMART_HCYL_PASS; |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SMART; |
| args.command_type = ide_cmd_type_parser(&args); |
| (void) smart_enable(drive); |
| return ide_raw_taskfile(drive, &args, buf); |
| } |
| |
| static int proc_idedisk_read_cache |
| (char *page, char **start, off_t off, int count, int *eof, void *data) |
| { |
| ide_drive_t *drive = (ide_drive_t *) data; |
| char *out = page; |
| int len; |
| |
| if (drive->id_read) |
| len = sprintf(out,"%i\n", drive->id->buf_size / 2); |
| else |
| len = sprintf(out,"(none)\n"); |
| PROC_IDE_READ_RETURN(page,start,off,count,eof,len); |
| } |
| |
| static int proc_idedisk_read_smart_thresholds |
| (char *page, char **start, off_t off, int count, int *eof, void *data) |
| { |
| ide_drive_t *drive = (ide_drive_t *)data; |
| int len = 0, i = 0; |
| |
| if (!get_smart_thresholds(drive, page)) { |
| unsigned short *val = (unsigned short *) page; |
| char *out = ((char *)val) + (SECTOR_WORDS * 4); |
| page = out; |
| do { |
| out += sprintf(out, "%04x%c", le16_to_cpu(*val), (++i & 7) ? ' ' : '\n'); |
| val += 1; |
| } while (i < (SECTOR_WORDS * 2)); |
| len = out - page; |
| } |
| PROC_IDE_READ_RETURN(page,start,off,count,eof,len); |
| } |
| |
| static int proc_idedisk_read_smart_values |
| (char *page, char **start, off_t off, int count, int *eof, void *data) |
| { |
| ide_drive_t *drive = (ide_drive_t *)data; |
| int len = 0, i = 0; |
| |
| if (!get_smart_values(drive, page)) { |
| unsigned short *val = (unsigned short *) page; |
| char *out = ((char *)val) + (SECTOR_WORDS * 4); |
| page = out; |
| do { |
| out += sprintf(out, "%04x%c", le16_to_cpu(*val), (++i & 7) ? ' ' : '\n'); |
| val += 1; |
| } while (i < (SECTOR_WORDS * 2)); |
| len = out - page; |
| } |
| PROC_IDE_READ_RETURN(page,start,off,count,eof,len); |
| } |
| |
| static ide_proc_entry_t idedisk_proc[] = { |
| { "cache", S_IFREG|S_IRUGO, proc_idedisk_read_cache, NULL }, |
| { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, |
| { "smart_values", S_IFREG|S_IRUSR, proc_idedisk_read_smart_values, NULL }, |
| { "smart_thresholds", S_IFREG|S_IRUSR, proc_idedisk_read_smart_thresholds, NULL }, |
| { NULL, 0, NULL, NULL } |
| }; |
| |
| #else |
| |
| #define idedisk_proc NULL |
| |
| #endif /* CONFIG_PROC_FS */ |
| |
| /* |
| * This is tightly woven into the driver->do_special can not touch. |
| * DON'T do it again until a total personality rewrite is committed. |
| */ |
| static int set_multcount(ide_drive_t *drive, int arg) |
| { |
| struct request rq; |
| |
| if (drive->special.b.set_multmode) |
| return -EBUSY; |
| ide_init_drive_cmd (&rq); |
| rq.cmd = IDE_DRIVE_CMD; |
| drive->mult_req = arg; |
| drive->special.b.set_multmode = 1; |
| (void) ide_do_drive_cmd (drive, &rq, ide_wait); |
| return (drive->mult_count == arg) ? 0 : -EIO; |
| } |
| |
| static int set_nowerr(ide_drive_t *drive, int arg) |
| { |
| if (ide_spin_wait_hwgroup(drive)) |
| return -EBUSY; |
| drive->nowerr = arg; |
| drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT; |
| spin_unlock_irq(&io_request_lock); |
| return 0; |
| } |
| |
| static int write_cache (ide_drive_t *drive, int arg) |
| { |
| ide_task_t args; |
| |
| if (!(drive->id->cfs_enable_2 & 0x3000)) |
| return 1; |
| |
| memset(&args, 0, sizeof(ide_task_t)); |
| args.tfRegister[IDE_FEATURE_OFFSET] = (arg) ? |
| SETFEATURES_EN_WCACHE : SETFEATURES_DIS_WCACHE; |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SETFEATURES; |
| args.command_type = ide_cmd_type_parser(&args); |
| (void) ide_raw_taskfile(drive, &args, NULL); |
| |
| drive->wcache = arg; |
| return 0; |
| } |
| |
| static int call_idedisk_standby (ide_drive_t *drive, int arg) |
| { |
| ide_task_t args; |
| u8 standby = (arg) ? WIN_STANDBYNOW2 : WIN_STANDBYNOW1; |
| memset(&args, 0, sizeof(ide_task_t)); |
| args.tfRegister[IDE_COMMAND_OFFSET] = standby; |
| args.command_type = ide_cmd_type_parser(&args); |
| return ide_raw_taskfile(drive, &args, NULL); |
| } |
| |
| static int do_idedisk_standby (ide_drive_t *drive) |
| { |
| return call_idedisk_standby(drive, 0); |
| } |
| |
| static int call_idedisk_suspend (ide_drive_t *drive, int arg) |
| { |
| ide_task_t args; |
| u8 suspend = (arg) ? WIN_SLEEPNOW2 : WIN_SLEEPNOW1; |
| memset(&args, 0, sizeof(ide_task_t)); |
| args.tfRegister[IDE_COMMAND_OFFSET] = suspend; |
| args.command_type = ide_cmd_type_parser(&args); |
| return ide_raw_taskfile(drive, &args, NULL); |
| } |
| |
| static int do_idedisk_suspend (ide_drive_t *drive) |
| { |
| if (drive->suspend_reset) |
| return 1; |
| ide_cacheflush_p(drive); |
| return call_idedisk_suspend(drive, 0); |
| } |
| |
| #if 0 |
| static int call_idedisk_checkpower (ide_drive_t *drive, int arg) |
| { |
| ide_task_t args; |
| u8 ckpw = (arg) ? WIN_CHECKPOWERMODE2 : WIN_CHECKPOWERMODE1; |
| memset(&args, 0, sizeof(ide_task_t)); |
| args.tfRegister[IDE_COMMAND_OFFSET] = ckpw; |
| args.command_type = ide_cmd_type_parser(&args); |
| ide_raw_taskfile(drive, &args, NULL); |
| #if 0 |
| if (errno != EIO || args[0] != 0 || args[1] != 0) |
| state = "unknown"; |
| else |
| state = "sleeping"; |
| } else { |
| state = (args[2] == 255) ? "active/idle" : "standby"; |
| #endif |
| return 0; |
| } |
| |
| static int do_idedisk_checkpower (ide_drive_t *drive) |
| { |
| return call_idedisk_checkpower(drive, 0); |
| } |
| #endif |
| |
| static int do_idedisk_resume (ide_drive_t *drive) |
| { |
| if (!drive->suspend_reset) |
| return 1; |
| return 0; |
| } |
| |
| static int do_idedisk_flushcache (ide_drive_t *drive) |
| { |
| ide_task_t args; |
| |
| memset(&args, 0, sizeof(ide_task_t)); |
| if (drive->id->cfs_enable_2 & 0x2400) |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_FLUSH_CACHE_EXT; |
| else |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_FLUSH_CACHE; |
| args.command_type = ide_cmd_type_parser(&args); |
| return ide_raw_taskfile(drive, &args, NULL); |
| } |
| |
| static int set_acoustic (ide_drive_t *drive, int arg) |
| { |
| ide_task_t args; |
| |
| memset(&args, 0, sizeof(ide_task_t)); |
| args.tfRegister[IDE_FEATURE_OFFSET] = (arg) ? SETFEATURES_EN_AAM : |
| SETFEATURES_DIS_AAM; |
| args.tfRegister[IDE_NSECTOR_OFFSET] = arg; |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SETFEATURES; |
| args.command_type = ide_cmd_type_parser(&args); |
| ide_raw_taskfile(drive, &args, NULL); |
| drive->acoustic = arg; |
| return 0; |
| } |
| |
| static int probe_lba_addressing (ide_drive_t *drive, int arg) |
| { |
| drive->addressing = 0; |
| |
| if (HWIF(drive)->addressing) |
| return 0; |
| |
| if (!(drive->id->cfs_enable_2 & 0x0400)) |
| return -EIO; |
| drive->addressing = arg; |
| return 0; |
| } |
| |
| static int set_lba_addressing (ide_drive_t *drive, int arg) |
| { |
| return (probe_lba_addressing(drive, arg)); |
| } |
| |
| static void idedisk_add_settings(ide_drive_t *drive) |
| { |
| struct hd_driveid *id = drive->id; |
| int major = HWIF(drive)->major; |
| int minor = drive->select.b.unit << PARTN_BITS; |
| |
| ide_add_setting(drive, "bios_cyl", SETTING_RW, -1, -1, TYPE_INT, 0, 65535, 1, 1, &drive->bios_cyl, NULL); |
| ide_add_setting(drive, "bios_head", SETTING_RW, -1, -1, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL); |
| ide_add_setting(drive, "bios_sect", SETTING_RW, -1, -1, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL); |
| ide_add_setting(drive, "address", SETTING_RW, HDIO_GET_ADDRESS, HDIO_SET_ADDRESS, TYPE_INTA, 0, 2, 1, 1, &drive->addressing, set_lba_addressing); |
| ide_add_setting(drive, "bswap", SETTING_READ, -1, -1, TYPE_BYTE, 0, 1, 1, 1, &drive->bswap, NULL); |
| ide_add_setting(drive, "multcount", id ? SETTING_RW : SETTING_READ, HDIO_GET_MULTCOUNT, HDIO_SET_MULTCOUNT, TYPE_BYTE, 0, id ? id->max_multsect : 0, 1, 1, &drive->mult_count, set_multcount); |
| ide_add_setting(drive, "nowerr", SETTING_RW, HDIO_GET_NOWERR, HDIO_SET_NOWERR, TYPE_BYTE, 0, 1, 1, 1, &drive->nowerr, set_nowerr); |
| ide_add_setting(drive, "breada_readahead", SETTING_RW, BLKRAGET, BLKRASET, TYPE_INT, 0, 255, 1, 1, &read_ahead[major], NULL); |
| ide_add_setting(drive, "file_readahead", SETTING_RW, BLKFRAGET, BLKFRASET, TYPE_INTA, 0, 4096, PAGE_SIZE, 1024, &max_readahead[major][minor], NULL); |
| ide_add_setting(drive, "max_kb_per_request", SETTING_RW, BLKSECTGET, BLKSECTSET, TYPE_INTA, 1, 255, 1, 1, &max_sectors[major][minor], NULL); |
| ide_add_setting(drive, "lun", SETTING_RW, -1, -1, TYPE_INT, 0, 7, 1, 1, &drive->lun, NULL); |
| ide_add_setting(drive, "wcache", SETTING_RW, HDIO_GET_WCACHE, HDIO_SET_WCACHE, TYPE_BYTE, 0, 1, 1, 1, &drive->wcache, write_cache); |
| ide_add_setting(drive, "acoustic", SETTING_RW, HDIO_GET_ACOUSTIC, HDIO_SET_ACOUSTIC, TYPE_BYTE, 0, 254, 1, 1, &drive->acoustic, set_acoustic); |
| ide_add_setting(drive, "failures", SETTING_RW, -1, -1, TYPE_INT, 0, 65535, 1, 1, &drive->failures, NULL); |
| ide_add_setting(drive, "max_failures", SETTING_RW, -1, -1, TYPE_INT, 0, 65535, 1, 1, &drive->max_failures, NULL); |
| } |
| |
| static int idedisk_ioctl (ide_drive_t *drive, struct inode *inode, |
| struct file *file, unsigned int cmd, unsigned long arg) |
| { |
| #if 0 |
| HDIO_GET_ADDRESS |
| HDIO_SET_ADDRESS |
| HDIO_GET_WCACHE |
| HDIO_SET_WCACHE |
| HDIO_GET_ACOUSTIC |
| HDIO_SET_ACOUSTIC |
| HDIO_GET_MULTCOUNT |
| HDIO_SET_MULTCOUNT |
| HDIO_GET_NOWERR |
| HDIO_SET_NOWERR |
| #endif |
| return -EINVAL; |
| } |
| |
| static void idedisk_setup (ide_drive_t *drive) |
| { |
| int i; |
| |
| struct hd_driveid *id = drive->id; |
| unsigned long capacity; |
| |
| idedisk_add_settings(drive); |
| |
| if (drive->id_read == 0) |
| return; |
| |
| /* |
| * CompactFlash cards and their brethern look just like hard drives |
| * to us, but they are removable and don't have a doorlock mechanism. |
| */ |
| if (drive->removable && !(drive->is_flash)) { |
| /* |
| * Removable disks (eg. SYQUEST); ignore 'WD' drives |
| */ |
| if (id->model[0] != 'W' || id->model[1] != 'D') { |
| drive->doorlocking = 1; |
| } |
| } |
| for (i = 0; i < MAX_DRIVES; ++i) { |
| ide_hwif_t *hwif = HWIF(drive); |
| |
| if (drive != &hwif->drives[i]) continue; |
| hwif->gd->de_arr[i] = drive->de; |
| if (drive->removable) |
| hwif->gd->flags[i] |= GENHD_FL_REMOVABLE; |
| break; |
| } |
| |
| #if 1 |
| (void) probe_lba_addressing(drive, 1); |
| #else |
| /* if using 48-bit addressing bump the request size up */ |
| if (probe_lba_addressing(drive, 1)) |
| blk_queue_max_sectors(&drive->queue, 2048); |
| #endif |
| |
| /* Extract geometry if we did not already have one for the drive */ |
| if (!drive->cyl || !drive->head || !drive->sect) { |
| drive->cyl = drive->bios_cyl = id->cyls; |
| drive->head = drive->bios_head = id->heads; |
| drive->sect = drive->bios_sect = id->sectors; |
| } |
| |
| /* Handle logical geometry translation by the drive */ |
| if ((id->field_valid & 1) && id->cur_cyls && |
| id->cur_heads && (id->cur_heads <= 16) && id->cur_sectors) { |
| drive->cyl = id->cur_cyls; |
| drive->head = id->cur_heads; |
| drive->sect = id->cur_sectors; |
| } |
| |
| /* Use physical geometry if what we have still makes no sense */ |
| if (drive->head > 16 && id->heads && id->heads <= 16) { |
| drive->cyl = id->cyls; |
| drive->head = id->heads; |
| drive->sect = id->sectors; |
| } |
| |
| /* calculate drive capacity, and select LBA if possible */ |
| init_idedisk_capacity (drive); |
| |
| /* |
| * if possible, give fdisk access to more of the drive, |
| * by correcting bios_cyls: |
| */ |
| capacity = idedisk_capacity (drive); |
| if ((capacity >= (drive->bios_cyl * drive->bios_sect * drive->bios_head)) && |
| (!drive->forced_geom) && drive->bios_sect && drive->bios_head) |
| drive->bios_cyl = (capacity / drive->bios_sect) / drive->bios_head; |
| printk (KERN_INFO "%s: %ld sectors", drive->name, capacity); |
| |
| /* Give size in megabytes (MB), not mebibytes (MiB). */ |
| /* We compute the exact rounded value, avoiding overflow. */ |
| printk (" (%ld MB)", (capacity - capacity/625 + 974)/1950); |
| |
| /* Only print cache size when it was specified */ |
| if (id->buf_size) |
| printk (" w/%dKiB Cache", id->buf_size/2); |
| |
| printk(", CHS=%d/%d/%d", |
| drive->bios_cyl, drive->bios_head, drive->bios_sect); |
| #ifdef CONFIG_BLK_DEV_IDEDMA |
| if (drive->using_dma) |
| (void) HWIF(drive)->ide_dma_verbose(drive); |
| #endif /* CONFIG_BLK_DEV_IDEDMA */ |
| printk("\n"); |
| |
| drive->mult_count = 0; |
| if (id->max_multsect) { |
| id->multsect = ((id->max_multsect/2) > 1) ? id->max_multsect : 0; |
| id->multsect_valid = id->multsect ? 1 : 0; |
| drive->mult_req = id->multsect_valid ? id->max_multsect : INITIAL_MULT_COUNT; |
| drive->special.b.set_multmode = drive->mult_req ? 1 : 0; |
| } |
| drive->no_io_32bit = id->dword_io ? 1 : 0; |
| if (drive->id->cfs_enable_2 & 0x3000) |
| write_cache(drive, (id->cfs_enable_2 & 0x3000)); |
| } |
| |
| static int idedisk_cleanup(ide_drive_t *drive) |
| { |
| ide_cacheflush_p(drive); |
| return ide_unregister_subdriver(drive); |
| } |
| |
| int idedisk_init (void); |
| int idedisk_attach(ide_drive_t *drive); |
| |
| /* |
| * IDE subdriver functions, registered with ide.c |
| */ |
| static ide_driver_t idedisk_driver = { |
| name: "ide-disk", |
| version: IDEDISK_VERSION, |
| media: ide_disk, |
| busy: 0, |
| supports_dma: 1, |
| supports_dsc_overlap: 0, |
| cleanup: idedisk_cleanup, |
| standby: do_idedisk_standby, |
| suspend: do_idedisk_suspend, |
| resume: do_idedisk_resume, |
| flushcache: do_idedisk_flushcache, |
| do_request: ide_do_rw_disk, |
| end_request: idedisk_end_request, |
| sense: idedisk_dump_status, |
| error: idedisk_error, |
| abort: idedisk_abort, |
| ioctl: idedisk_ioctl, |
| open: idedisk_open, |
| release: idedisk_release, |
| media_change: idedisk_media_change, |
| revalidate: idedisk_revalidate, |
| pre_reset: idedisk_pre_reset, |
| capacity: idedisk_capacity, |
| special: idedisk_special, |
| proc: idedisk_proc, |
| init: idedisk_init, |
| attach: idedisk_attach, |
| ata_prebuilder: NULL, |
| atapi_prebuilder: NULL, |
| }; |
| |
| static ide_module_t idedisk_module = { |
| IDE_DRIVER_MODULE, |
| idedisk_init, |
| &idedisk_driver, |
| NULL |
| }; |
| |
| MODULE_DESCRIPTION("ATA DISK Driver"); |
| |
| int idedisk_attach (ide_drive_t *drive) |
| { |
| int ret = 0; |
| |
| MOD_INC_USE_COUNT; |
| if (ide_register_subdriver(drive, |
| &idedisk_driver, IDE_SUBDRIVER_VERSION)) { |
| printk(KERN_ERR "ide-disk: %s: Failed to register the " |
| "driver with ide.c\n", drive->name); |
| ret= 1; |
| goto bye_game_over; |
| } |
| DRIVER(drive)->busy++; |
| idedisk_setup(drive); |
| if ((!drive->head || drive->head > 16) && !drive->select.b.lba) { |
| printk(KERN_ERR "%s: INVALID GEOMETRY: %d PHYSICAL HEADS?\n", |
| drive->name, drive->head); |
| (void) idedisk_cleanup(drive); |
| ret= 1; |
| } |
| DRIVER(drive)->busy--; |
| bye_game_over: |
| MOD_DEC_USE_COUNT; |
| return ret; |
| } |
| |
| static void __exit idedisk_exit (void) |
| { |
| ide_drive_t *drive; |
| int failed = 0; |
| |
| while ((drive = ide_scan_devices(ide_disk, idedisk_driver.name, |
| &idedisk_driver, failed)) != NULL) { |
| if (idedisk_cleanup (drive)) { |
| printk(KERN_ERR "%s: cleanup_module() called while " |
| "still busy\n", drive->name); |
| failed++; |
| } |
| #ifdef CONFIG_PROC_FS |
| /* We must remove proc entries defined in this module. |
| * Otherwise we oops while accessing these entries |
| */ |
| if (drive->proc) |
| ide_remove_proc_entries(drive->proc, idedisk_proc); |
| #endif |
| } |
| ide_unregister_module(&idedisk_module); |
| } |
| |
| int idedisk_init (void) |
| { |
| #ifdef CLASSIC_BUILTINS_METHOD |
| ide_drive_t *drive; |
| int failed = 0; |
| #endif /* CLASSIC_BUILTINS_METHOD */ |
| |
| MOD_INC_USE_COUNT; |
| |
| #ifdef CLASSIC_BUILTINS_METHOD |
| while ((drive = ide_scan_devices(ide_disk, |
| idedisk_driver.name, NULL, failed++)) != NULL) { |
| if (ide_register_subdriver(drive, |
| &idedisk_driver, IDE_SUBDRIVER_VERSION)) { |
| printk(KERN_ERR "ide-disk: %s: Failed to register " |
| "the driver with ide.c\n", drive->name); |
| continue; |
| } |
| DRIVER(drive)->busy++; |
| idedisk_setup(drive); |
| if ((!drive->head || drive->head > 16) && |
| (!drive->select.b.lba)) { |
| printk(KERN_ERR "%s: INVALID GEOMETRY: %d " |
| "PHYSICAL HEADS?\n", drive->name, drive->head); |
| (void) idedisk_cleanup(drive); |
| DRIVER(drive)->busy--; |
| continue; |
| } |
| DRIVER(drive)->busy--; |
| failed--; |
| } |
| #endif /* CLASSIC_BUILTINS_METHOD */ |
| |
| ide_register_module(&idedisk_module); |
| MOD_DEC_USE_COUNT; |
| return 0; |
| } |
| |
| ide_startstop_t panic_box(ide_drive_t *drive) |
| { |
| #if 0 |
| panic("%s: Attempted to corrupt something: ide operation " |
| #else |
| printk(KERN_ERR "%s: Attempted to corrupt something: ide operation " |
| #endif |
| "was pending accross suspend/resume.\n", drive->name); |
| return ide_stopped; |
| } |
| |
| int ide_disks_busy(void) |
| { |
| int i; |
| for (i=0; i<MAX_HWIFS; i++) { |
| struct hwgroup_s *hwgroup = ide_hwifs[i].hwgroup; |
| if (!hwgroup) continue; |
| if ((hwgroup->handler) && (hwgroup->handler != panic_box)) |
| return 1; |
| } |
| return 0; |
| } |
| |
| void ide_disk_suspend(void) |
| { |
| int i; |
| while (ide_disks_busy()) { |
| printk("*"); |
| schedule(); |
| } |
| for (i=0; i<MAX_HWIFS; i++) { |
| struct hwgroup_s *hwgroup = ide_hwifs[i].hwgroup; |
| |
| if (!hwgroup) continue; |
| hwgroup->handler_save = hwgroup->handler; |
| hwgroup->handler = panic_box; |
| } |
| driver_blocked = 1; |
| if (ide_disks_busy()) |
| panic("How did you get that request through?!"); |
| } |
| |
| /* unsuspend and resume should be equal in the ideal world */ |
| |
| void ide_disk_unsuspend(void) |
| { |
| int i; |
| for (i=0; i<MAX_HWIFS; i++) { |
| struct hwgroup_s *hwgroup = ide_hwifs[i].hwgroup; |
| |
| if (!hwgroup) continue; |
| hwgroup->handler = NULL; /* hwgroup->handler_save; */ |
| hwgroup->handler_save = NULL; |
| } |
| driver_blocked = 0; |
| } |
| |
| void ide_disk_resume(void) |
| { |
| int i; |
| for (i=0; i<MAX_HWIFS; i++) { |
| struct hwgroup_s *hwgroup = ide_hwifs[i].hwgroup; |
| |
| if (!hwgroup) continue; |
| if (hwgroup->handler != panic_box) |
| panic("Handler was not set to panic?"); |
| hwgroup->handler_save = NULL; |
| hwgroup->handler = NULL; |
| } |
| driver_blocked = 0; |
| } |
| |
| module_init(idedisk_init); |
| module_exit(idedisk_exit); |
| MODULE_LICENSE("GPL"); |