| /* net/atm/clip.c - RFC1577 Classical IP over ATM */ |
| |
| /* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA |
| * |
| * Changes: |
| * Harald Welte <laforge@gnumonks.org>: |
| * - backport DaveM's generalized neighbour cache from 2.6.9-rcX */ |
| |
| |
| #include <linux/config.h> |
| #include <linux/string.h> |
| #include <linux/errno.h> |
| #include <linux/kernel.h> /* for UINT_MAX */ |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/netdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/wait.h> |
| #include <linux/timer.h> |
| #include <linux/if_arp.h> /* for some manifest constants */ |
| #include <linux/notifier.h> |
| #include <linux/atm.h> |
| #include <linux/atmdev.h> |
| #include <linux/atmclip.h> |
| #include <linux/atmarp.h> |
| #include <linux/ip.h> /* for net/route.h */ |
| #include <linux/in.h> /* for struct sockaddr_in */ |
| #include <linux/if.h> /* for IFF_UP */ |
| #include <linux/inetdevice.h> |
| #include <linux/bitops.h> |
| #include <linux/jhash.h> |
| #include <net/route.h> /* for struct rtable and routing */ |
| #include <net/icmp.h> /* icmp_send */ |
| #include <asm/param.h> /* for HZ */ |
| #include <asm/byteorder.h> /* for htons etc. */ |
| #include <asm/system.h> /* save/restore_flags */ |
| #include <asm/uaccess.h> |
| #include <asm/atomic.h> |
| |
| #include "common.h" |
| #include "resources.h" |
| #include "ipcommon.h" |
| #include <net/atmclip.h> |
| |
| |
| #if 0 |
| #define DPRINTK(format,args...) printk(format,##args) |
| #else |
| #define DPRINTK(format,args...) |
| #endif |
| |
| |
| struct net_device *clip_devs = NULL; |
| struct atm_vcc *atmarpd = NULL; |
| static struct neigh_table clip_tbl; |
| static struct timer_list idle_timer; |
| static int start_timer = 1; |
| |
| |
| static int to_atmarpd(enum atmarp_ctrl_type type,int itf,unsigned long ip) |
| { |
| struct atmarp_ctrl *ctrl; |
| struct sk_buff *skb; |
| |
| DPRINTK("to_atmarpd(%d)\n",type); |
| if (!atmarpd) return -EUNATCH; |
| skb = alloc_skb(sizeof(struct atmarp_ctrl),GFP_ATOMIC); |
| if (!skb) return -ENOMEM; |
| ctrl = (struct atmarp_ctrl *) skb_put(skb,sizeof(struct atmarp_ctrl)); |
| ctrl->type = type; |
| ctrl->itf_num = itf; |
| ctrl->ip = ip; |
| atm_force_charge(atmarpd,skb->truesize); |
| skb_queue_tail(&atmarpd->sk->receive_queue,skb); |
| wake_up(&atmarpd->sleep); |
| return 0; |
| } |
| |
| |
| static void link_vcc(struct clip_vcc *clip_vcc,struct atmarp_entry *entry) |
| { |
| DPRINTK("link_vcc %p to entry %p (neigh %p)\n",clip_vcc,entry, |
| entry->neigh); |
| clip_vcc->entry = entry; |
| clip_vcc->xoff = 0; /* @@@ may overrun buffer by one packet */ |
| clip_vcc->next = entry->vccs; |
| entry->vccs = clip_vcc; |
| entry->neigh->used = jiffies; |
| } |
| |
| |
| static void unlink_clip_vcc(struct clip_vcc *clip_vcc) |
| { |
| struct atmarp_entry *entry = clip_vcc->entry; |
| struct clip_vcc **walk; |
| |
| if (!entry) { |
| printk(KERN_CRIT "!clip_vcc->entry (clip_vcc %p)\n",clip_vcc); |
| return; |
| } |
| spin_lock_bh(&entry->neigh->dev->xmit_lock); /* block clip_start_xmit() */ |
| entry->neigh->used = jiffies; |
| for (walk = &entry->vccs; *walk; walk = &(*walk)->next) |
| if (*walk == clip_vcc) { |
| int error; |
| |
| *walk = clip_vcc->next; /* atomic */ |
| clip_vcc->entry = NULL; |
| if (clip_vcc->xoff) |
| netif_wake_queue(entry->neigh->dev); |
| if (entry->vccs) |
| goto out; |
| entry->expires = jiffies-1; |
| /* force resolution or expiration */ |
| error = neigh_update(entry->neigh,NULL,NUD_NONE,0,0); |
| if (error) |
| printk(KERN_CRIT "unlink_clip_vcc: " |
| "neigh_update failed with %d\n",error); |
| goto out; |
| } |
| printk(KERN_CRIT "ATMARP: unlink_clip_vcc failed (entry %p, vcc " |
| "0x%p)\n",entry,clip_vcc); |
| out: |
| spin_unlock_bh(&entry->neigh->dev->xmit_lock); |
| } |
| |
| /* The neighbour entry n->lock is held. */ |
| static int neigh_check_cb(struct neighbour *n) |
| { |
| struct atmarp_entry *entry = NEIGH2ENTRY(n); |
| struct clip_vcc *cv; |
| |
| for (cv = entry->vccs; cv; cv = cv->next) { |
| unsigned long exp = cv->last_use + cv->idle_timeout; |
| |
| if (cv->idle_timeout && time_after(jiffies, exp)) { |
| DPRINTK("releasing vcc %p->%p of entry %p\n", |
| cv, cv->vcc, entry); |
| vcc_release_async(cv->vcc, -ETIMEDOUT); |
| } |
| } |
| |
| if (entry->vccs || time_before(jiffies, entry->expires)) |
| return 0; |
| |
| if (atomic_read(&n->refcnt) > 1) { |
| struct sk_buff *skb; |
| |
| DPRINTK("destruction postponed with ref %d\n", |
| atomic_read(&n->refcnt)); |
| |
| while ((skb = skb_dequeue(&n->arp_queue)) != NULL) |
| dev_kfree_skb(skb); |
| |
| return 0; |
| } |
| |
| DPRINTK("expired neigh %p\n",n); |
| return 1; |
| } |
| |
| static void idle_timer_check(unsigned long dummy) |
| { |
| write_lock(&clip_tbl.lock); |
| __neigh_for_each_release(&clip_tbl, neigh_check_cb); |
| mod_timer(&idle_timer, jiffies+CLIP_CHECK_INTERVAL*HZ); |
| write_unlock(&clip_tbl.lock); |
| } |
| |
| static int clip_arp_rcv(struct sk_buff *skb) |
| { |
| struct atm_vcc *vcc; |
| |
| DPRINTK("clip_arp_rcv\n"); |
| vcc = ATM_SKB(skb)->vcc; |
| if (!vcc || !atm_charge(vcc,skb->truesize)) { |
| dev_kfree_skb_any(skb); |
| return 0; |
| } |
| DPRINTK("pushing to %p\n",vcc); |
| DPRINTK("using %p\n",CLIP_VCC(vcc)->old_push); |
| CLIP_VCC(vcc)->old_push(vcc,skb); |
| return 0; |
| } |
| |
| |
| static void clip_push(struct atm_vcc *vcc,struct sk_buff *skb) |
| { |
| struct clip_vcc *clip_vcc = CLIP_VCC(vcc); |
| |
| DPRINTK("clip push\n"); |
| if (!skb) { |
| DPRINTK("removing VCC %p\n",clip_vcc); |
| if (clip_vcc->entry) unlink_clip_vcc(clip_vcc); |
| clip_vcc->old_push(vcc,NULL); /* pass on the bad news */ |
| kfree(clip_vcc); |
| return; |
| } |
| atm_return(vcc,skb->truesize); |
| skb->dev = clip_vcc->entry ? clip_vcc->entry->neigh->dev : clip_devs; |
| /* clip_vcc->entry == NULL if we don't have an IP address yet */ |
| if (!skb->dev) { |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| ATM_SKB(skb)->vcc = vcc; |
| skb->mac.raw = skb->data; |
| if (!clip_vcc->encap || skb->len < RFC1483LLC_LEN || memcmp(skb->data, |
| llc_oui,sizeof(llc_oui))) skb->protocol = htons(ETH_P_IP); |
| else { |
| skb->protocol = ((u16 *) skb->data)[3]; |
| skb_pull(skb,RFC1483LLC_LEN); |
| if (skb->protocol == htons(ETH_P_ARP)) { |
| PRIV(skb->dev)->stats.rx_packets++; |
| PRIV(skb->dev)->stats.rx_bytes += skb->len; |
| clip_arp_rcv(skb); |
| return; |
| } |
| } |
| clip_vcc->last_use = jiffies; |
| PRIV(skb->dev)->stats.rx_packets++; |
| PRIV(skb->dev)->stats.rx_bytes += skb->len; |
| memset(ATM_SKB(skb), 0, sizeof(struct atm_skb_data)); |
| netif_rx(skb); |
| } |
| |
| |
| /* |
| * Note: these spinlocks _must_not_ block on non-SMP. The only goal is that |
| * clip_pop is atomic with respect to the critical section in clip_start_xmit. |
| */ |
| |
| |
| static void clip_pop(struct atm_vcc *vcc,struct sk_buff *skb) |
| { |
| struct clip_vcc *clip_vcc = CLIP_VCC(vcc); |
| struct net_device *dev = skb->dev; |
| int old; |
| unsigned long flags; |
| |
| DPRINTK("clip_pop(vcc %p)\n",vcc); |
| clip_vcc->old_pop(vcc,skb); |
| /* skb->dev == NULL in outbound ARP packets */ |
| if (!dev) return; |
| spin_lock_irqsave(&PRIV(dev)->xoff_lock,flags); |
| if (atm_may_send(vcc,0)) { |
| old = xchg(&clip_vcc->xoff,0); |
| if (old) netif_wake_queue(dev); |
| } |
| spin_unlock_irqrestore(&PRIV(dev)->xoff_lock,flags); |
| } |
| |
| |
| static void clip_neigh_destroy(struct neighbour *neigh) |
| { |
| DPRINTK("clip_neigh_destroy (neigh %p)\n",neigh); |
| if (NEIGH2ENTRY(neigh)->vccs) |
| printk(KERN_CRIT "clip_neigh_destroy: vccs != NULL !!!\n"); |
| NEIGH2ENTRY(neigh)->vccs = (void *) 0xdeadbeef; |
| } |
| |
| |
| static void clip_neigh_solicit(struct neighbour *neigh,struct sk_buff *skb) |
| { |
| DPRINTK("clip_neigh_solicit (neigh %p, skb %p)\n",neigh,skb); |
| to_atmarpd(act_need,PRIV(neigh->dev)->number,NEIGH2ENTRY(neigh)->ip); |
| } |
| |
| |
| static void clip_neigh_error(struct neighbour *neigh,struct sk_buff *skb) |
| { |
| #ifndef CONFIG_ATM_CLIP_NO_ICMP |
| icmp_send(skb,ICMP_DEST_UNREACH,ICMP_HOST_UNREACH,0); |
| #endif |
| kfree_skb(skb); |
| } |
| |
| |
| static struct neigh_ops clip_neigh_ops = { |
| family: AF_INET, |
| destructor: clip_neigh_destroy, |
| solicit: clip_neigh_solicit, |
| error_report: clip_neigh_error, |
| output: dev_queue_xmit, |
| connected_output: dev_queue_xmit, |
| hh_output: dev_queue_xmit, |
| queue_xmit: dev_queue_xmit, |
| }; |
| |
| |
| static int clip_constructor(struct neighbour *neigh) |
| { |
| struct atmarp_entry *entry = NEIGH2ENTRY(neigh); |
| struct net_device *dev = neigh->dev; |
| struct in_device *in_dev = dev->ip_ptr; |
| |
| DPRINTK("clip_constructor (neigh %p, entry %p)\n",neigh,entry); |
| if (!in_dev) return -EINVAL; |
| neigh->type = inet_addr_type(entry->ip); |
| if (neigh->type != RTN_UNICAST) return -EINVAL; |
| if (in_dev->arp_parms) neigh->parms = in_dev->arp_parms; |
| neigh->ops = &clip_neigh_ops; |
| neigh->output = neigh->nud_state & NUD_VALID ? |
| neigh->ops->connected_output : neigh->ops->output; |
| entry->neigh = neigh; |
| entry->vccs = NULL; |
| entry->expires = jiffies-1; |
| return 0; |
| } |
| |
| static u32 clip_hash(const void *pkey, const struct net_device *dev) |
| { |
| return jhash_2words(*(u32 *)pkey, dev->ifindex, clip_tbl.hash_rnd); |
| } |
| |
| |
| static struct neigh_table clip_tbl = { |
| NULL, /* next */ |
| AF_INET, /* family */ |
| sizeof(struct neighbour)+sizeof(struct atmarp_entry), /* entry_size */ |
| 4, /* key_len */ |
| clip_hash, |
| clip_constructor, /* constructor */ |
| NULL, /* pconstructor */ |
| NULL, /* pdestructor */ |
| NULL, /* proxy_redo */ |
| "clip_arp_cache", |
| { /* neigh_parms */ |
| NULL, /* next */ |
| NULL, /* neigh_setup */ |
| &clip_tbl, /* tbl */ |
| 0, /* entries */ |
| NULL, /* priv */ |
| NULL, /* sysctl_table */ |
| 30*HZ, /* base_reachable_time */ |
| 1*HZ, /* retrans_time */ |
| 60*HZ, /* gc_staletime */ |
| 30*HZ, /* reachable_time */ |
| 5*HZ, /* delay_probe_time */ |
| 3, /* queue_len */ |
| 3, /* ucast_probes */ |
| 0, /* app_probes */ |
| 3, /* mcast_probes */ |
| 1*HZ, /* anycast_delay */ |
| (8*HZ)/10, /* proxy_delay */ |
| 1*HZ, /* proxy_qlen */ |
| 64 /* locktime */ |
| }, |
| 30*HZ,128,512,1024 /* copied from ARP ... */ |
| }; |
| |
| |
| /* @@@ copy bh locking from arp.c -- need to bh-enable atm code before */ |
| |
| /* |
| * We play with the resolve flag: 0 and 1 have the usual meaning, but -1 means |
| * to allocate the neighbour entry but not to ask atmarpd for resolution. Also, |
| * don't increment the usage count. This is used to create entries in |
| * clip_setentry. |
| */ |
| |
| |
| static int clip_encap(struct atm_vcc *vcc,int mode) |
| { |
| CLIP_VCC(vcc)->encap = mode; |
| return 0; |
| } |
| |
| |
| static int clip_start_xmit(struct sk_buff *skb,struct net_device *dev) |
| { |
| struct clip_priv *clip_priv = PRIV(dev); |
| struct atmarp_entry *entry; |
| struct atm_vcc *vcc; |
| int old; |
| unsigned long flags; |
| |
| DPRINTK("clip_start_xmit (skb %p)\n",skb); |
| if (!skb->dst) { |
| printk(KERN_ERR "clip_start_xmit: skb->dst == NULL\n"); |
| dev_kfree_skb(skb); |
| clip_priv->stats.tx_dropped++; |
| return 0; |
| } |
| if (!skb->dst->neighbour) { |
| #if 0 |
| skb->dst->neighbour = clip_find_neighbour(skb->dst,1); |
| if (!skb->dst->neighbour) { |
| dev_kfree_skb(skb); /* lost that one */ |
| clip_priv->stats.tx_dropped++; |
| return 0; |
| } |
| #endif |
| printk(KERN_ERR "clip_start_xmit: NO NEIGHBOUR !\n"); |
| dev_kfree_skb(skb); |
| clip_priv->stats.tx_dropped++; |
| return 0; |
| } |
| entry = NEIGH2ENTRY(skb->dst->neighbour); |
| if (!entry->vccs) { |
| if (time_after(jiffies, entry->expires)) { |
| /* should be resolved */ |
| entry->expires = jiffies+ATMARP_RETRY_DELAY*HZ; |
| to_atmarpd(act_need,PRIV(dev)->number,entry->ip); |
| } |
| if (entry->neigh->arp_queue.qlen < ATMARP_MAX_UNRES_PACKETS) |
| skb_queue_tail(&entry->neigh->arp_queue,skb); |
| else { |
| dev_kfree_skb(skb); |
| clip_priv->stats.tx_dropped++; |
| } |
| return 0; |
| } |
| DPRINTK("neigh %p, vccs %p\n",entry,entry->vccs); |
| ATM_SKB(skb)->vcc = vcc = entry->vccs->vcc; |
| DPRINTK("using neighbour %p, vcc %p\n",skb->dst->neighbour,vcc); |
| if (entry->vccs->encap) { |
| void *here; |
| |
| here = skb_push(skb,RFC1483LLC_LEN); |
| memcpy(here,llc_oui,sizeof(llc_oui)); |
| ((u16 *) here)[3] = skb->protocol; |
| } |
| atomic_add(skb->truesize,&vcc->sk->wmem_alloc); |
| ATM_SKB(skb)->atm_options = vcc->atm_options; |
| entry->vccs->last_use = jiffies; |
| DPRINTK("atm_skb(%p)->vcc(%p)->dev(%p)\n",skb,vcc,vcc->dev); |
| old = xchg(&entry->vccs->xoff,1); /* assume XOFF ... */ |
| if (old) { |
| printk(KERN_WARNING "clip_start_xmit: XOFF->XOFF transition\n"); |
| return 0; |
| } |
| clip_priv->stats.tx_packets++; |
| clip_priv->stats.tx_bytes += skb->len; |
| (void) vcc->send(vcc,skb); |
| if (atm_may_send(vcc,0)) { |
| entry->vccs->xoff = 0; |
| return 0; |
| } |
| spin_lock_irqsave(&clip_priv->xoff_lock,flags); |
| netif_stop_queue(dev); /* XOFF -> throttle immediately */ |
| barrier(); |
| if (!entry->vccs->xoff) |
| netif_start_queue(dev); |
| /* Oh, we just raced with clip_pop. netif_start_queue should be |
| good enough, because nothing should really be asleep because |
| of the brief netif_stop_queue. If this isn't true or if it |
| changes, use netif_wake_queue instead. */ |
| spin_unlock_irqrestore(&clip_priv->xoff_lock,flags); |
| return 0; |
| } |
| |
| |
| static struct net_device_stats *clip_get_stats(struct net_device *dev) |
| { |
| return &PRIV(dev)->stats; |
| } |
| |
| |
| static int clip_mkip(struct atm_vcc *vcc,int timeout) |
| { |
| struct clip_vcc *clip_vcc; |
| struct sk_buff_head copy; |
| struct sk_buff *skb; |
| |
| if (!vcc->push) return -EBADFD; |
| clip_vcc = kmalloc(sizeof(struct clip_vcc),GFP_KERNEL); |
| if (!clip_vcc) return -ENOMEM; |
| DPRINTK("mkip clip_vcc %p vcc %p\n",clip_vcc,vcc); |
| clip_vcc->vcc = vcc; |
| vcc->user_back = clip_vcc; |
| clip_vcc->entry = NULL; |
| clip_vcc->xoff = 0; |
| clip_vcc->encap = 1; |
| clip_vcc->last_use = jiffies; |
| clip_vcc->idle_timeout = timeout*HZ; |
| clip_vcc->old_push = vcc->push; |
| clip_vcc->old_pop = vcc->pop; |
| vcc->push = clip_push; |
| vcc->pop = clip_pop; |
| skb_queue_head_init(©); |
| skb_migrate(&vcc->sk->receive_queue,©); |
| /* re-process everything received between connection setup and MKIP */ |
| while ((skb = skb_dequeue(©))) |
| if (!clip_devs) { |
| atm_return(vcc,skb->truesize); |
| kfree_skb(skb); |
| } |
| else { |
| unsigned int len = skb->len; |
| |
| skb_get(skb); |
| clip_push(vcc,skb); |
| PRIV(skb->dev)->stats.rx_packets--; |
| PRIV(skb->dev)->stats.rx_bytes -= len; |
| kfree_skb(skb); |
| } |
| return 0; |
| } |
| |
| |
| static int clip_setentry(struct atm_vcc *vcc,u32 ip) |
| { |
| struct neighbour *neigh; |
| struct atmarp_entry *entry; |
| int error; |
| struct clip_vcc *clip_vcc; |
| struct rtable *rt; |
| |
| if (vcc->push != clip_push) { |
| printk(KERN_WARNING "clip_setentry: non-CLIP VCC\n"); |
| return -EBADF; |
| } |
| clip_vcc = CLIP_VCC(vcc); |
| if (!ip) { |
| if (!clip_vcc->entry) { |
| printk(KERN_ERR "hiding hidden ATMARP entry\n"); |
| return 0; |
| } |
| DPRINTK("setentry: remove\n"); |
| unlink_clip_vcc(clip_vcc); |
| return 0; |
| } |
| error = ip_route_output(&rt,ip,0,1,0); |
| if (error) return error; |
| neigh = __neigh_lookup(&clip_tbl,&ip,rt->u.dst.dev,1); |
| ip_rt_put(rt); |
| if (!neigh) |
| return -ENOMEM; |
| entry = NEIGH2ENTRY(neigh); |
| if (entry != clip_vcc->entry) { |
| if (!clip_vcc->entry) DPRINTK("setentry: add\n"); |
| else { |
| DPRINTK("setentry: update\n"); |
| unlink_clip_vcc(clip_vcc); |
| } |
| link_vcc(clip_vcc,entry); |
| } |
| error = neigh_update(neigh,llc_oui,NUD_PERMANENT,1,0); |
| neigh_release(neigh); |
| return error; |
| } |
| |
| |
| static int clip_init(struct net_device *dev) |
| { |
| DPRINTK("clip_init %s\n",dev->name); |
| dev->hard_start_xmit = clip_start_xmit; |
| /* sg_xmit ... */ |
| dev->hard_header = NULL; |
| dev->rebuild_header = NULL; |
| dev->set_mac_address = NULL; |
| dev->hard_header_parse = NULL; |
| dev->hard_header_cache = NULL; |
| dev->header_cache_update = NULL; |
| dev->change_mtu = NULL; |
| dev->do_ioctl = NULL; |
| dev->get_stats = clip_get_stats; |
| dev->type = ARPHRD_ATM; |
| dev->hard_header_len = RFC1483LLC_LEN; |
| dev->mtu = RFC1626_MTU; |
| dev->addr_len = 0; |
| dev->tx_queue_len = 100; /* "normal" queue (packets) */ |
| /* When using a "real" qdisc, the qdisc determines the queue */ |
| /* length. tx_queue_len is only used for the default case, */ |
| /* without any more elaborate queuing. 100 is a reasonable */ |
| /* compromise between decent burst-tolerance and protection */ |
| /* against memory hogs. */ |
| dev->flags = 0; |
| return 0; |
| } |
| |
| |
| static int clip_create(int number) |
| { |
| struct net_device *dev; |
| struct clip_priv *clip_priv; |
| int error; |
| |
| if (number != -1) { |
| for (dev = clip_devs; dev; dev = PRIV(dev)->next) |
| if (PRIV(dev)->number == number) return -EEXIST; |
| } |
| else { |
| number = 0; |
| for (dev = clip_devs; dev; dev = PRIV(dev)->next) |
| if (PRIV(dev)->number >= number) |
| number = PRIV(dev)->number+1; |
| } |
| dev = kmalloc(sizeof(struct net_device)+sizeof(struct clip_priv), |
| GFP_KERNEL); |
| if (!dev) return -ENOMEM; |
| memset(dev,0,sizeof(struct net_device)+sizeof(struct clip_priv)); |
| clip_priv = PRIV(dev); |
| sprintf(dev->name,"atm%d",number); |
| dev->init = clip_init; |
| spin_lock_init(&clip_priv->xoff_lock); |
| clip_priv->number = number; |
| error = register_netdev(dev); |
| if (error) { |
| kfree(dev); |
| return error; |
| } |
| clip_priv->next = clip_devs; |
| clip_devs = dev; |
| DPRINTK("registered (net:%s)\n",dev->name); |
| return number; |
| } |
| |
| |
| static int clip_device_event(struct notifier_block *this,unsigned long event, |
| void *dev) |
| { |
| /* ignore non-CLIP devices */ |
| if (((struct net_device *) dev)->type != ARPHRD_ATM || |
| ((struct net_device *) dev)->init != clip_init) |
| return NOTIFY_DONE; |
| switch (event) { |
| case NETDEV_UP: |
| DPRINTK("clip_device_event NETDEV_UP\n"); |
| (void) to_atmarpd(act_up,PRIV(dev)->number,0); |
| break; |
| case NETDEV_GOING_DOWN: |
| DPRINTK("clip_device_event NETDEV_DOWN\n"); |
| (void) to_atmarpd(act_down,PRIV(dev)->number,0); |
| break; |
| case NETDEV_CHANGE: |
| case NETDEV_CHANGEMTU: |
| DPRINTK("clip_device_event NETDEV_CHANGE*\n"); |
| (void) to_atmarpd(act_change,PRIV(dev)->number,0); |
| break; |
| case NETDEV_REBOOT: |
| case NETDEV_REGISTER: |
| case NETDEV_DOWN: |
| DPRINTK("clip_device_event %ld\n",event); |
| /* ignore */ |
| break; |
| default: |
| printk(KERN_WARNING "clip_device_event: unknown event " |
| "%ld\n",event); |
| break; |
| } |
| return NOTIFY_DONE; |
| } |
| |
| |
| static int clip_inet_event(struct notifier_block *this,unsigned long event, |
| void *ifa) |
| { |
| struct in_device *in_dev; |
| |
| in_dev = ((struct in_ifaddr *) ifa)->ifa_dev; |
| if (!in_dev || !in_dev->dev) { |
| printk(KERN_WARNING "clip_inet_event: no device\n"); |
| return NOTIFY_DONE; |
| } |
| /* |
| * Transitions are of the down-change-up type, so it's sufficient to |
| * handle the change on up. |
| */ |
| if (event != NETDEV_UP) return NOTIFY_DONE; |
| return clip_device_event(this,NETDEV_CHANGE,in_dev->dev); |
| } |
| |
| |
| static struct notifier_block clip_dev_notifier = { |
| clip_device_event, |
| NULL, |
| 0 |
| }; |
| |
| |
| |
| static struct notifier_block clip_inet_notifier = { |
| clip_inet_event, |
| NULL, |
| 0 |
| }; |
| |
| |
| |
| static void atmarpd_close(struct atm_vcc *vcc) |
| { |
| DPRINTK("atmarpd_close\n"); |
| atmarpd = NULL; /* assumed to be atomic */ |
| barrier(); |
| unregister_inetaddr_notifier(&clip_inet_notifier); |
| unregister_netdevice_notifier(&clip_dev_notifier); |
| if (skb_peek(&vcc->sk->receive_queue)) |
| printk(KERN_ERR "atmarpd_close: closing with requests " |
| "pending\n"); |
| skb_queue_purge(&vcc->sk->receive_queue); |
| DPRINTK("(done)\n"); |
| MOD_DEC_USE_COUNT; |
| } |
| |
| |
| static struct atmdev_ops atmarpd_dev_ops = { |
| .close = atmarpd_close, |
| }; |
| |
| |
| static struct atm_dev atmarpd_dev = { |
| .ops = &atmarpd_dev_ops, |
| .type = "arpd", |
| .number = 999, |
| .lock = SPIN_LOCK_UNLOCKED |
| }; |
| |
| |
| static int atm_init_atmarp(struct atm_vcc *vcc) |
| { |
| struct net_device *dev; |
| |
| if (atmarpd) return -EADDRINUSE; |
| if (start_timer) { |
| start_timer = 0; |
| init_timer(&idle_timer); |
| idle_timer.expires = jiffies+CLIP_CHECK_INTERVAL*HZ; |
| idle_timer.function = idle_timer_check; |
| add_timer(&idle_timer); |
| } |
| atmarpd = vcc; |
| set_bit(ATM_VF_META,&vcc->flags); |
| set_bit(ATM_VF_READY,&vcc->flags); |
| /* allow replies and avoid getting closed if signaling dies */ |
| vcc->dev = &atmarpd_dev; |
| vcc_insert_socket(vcc->sk); |
| vcc->push = NULL; |
| vcc->pop = NULL; /* crash */ |
| vcc->push_oam = NULL; /* crash */ |
| if (register_netdevice_notifier(&clip_dev_notifier)) |
| printk(KERN_ERR "register_netdevice_notifier failed\n"); |
| if (register_inetaddr_notifier(&clip_inet_notifier)) |
| printk(KERN_ERR "register_inetaddr_notifier failed\n"); |
| for (dev = clip_devs; dev; dev = PRIV(dev)->next) |
| if (dev->flags & IFF_UP) |
| (void) to_atmarpd(act_up,PRIV(dev)->number,0); |
| MOD_INC_USE_COUNT; |
| return 0; |
| } |
| |
| static struct atm_clip_ops __atm_clip_ops = { |
| .clip_create = clip_create, |
| .clip_mkip = clip_mkip, |
| .clip_setentry = clip_setentry, |
| .clip_encap = clip_encap, |
| .clip_push = clip_push, |
| .atm_init_atmarp = atm_init_atmarp, |
| .owner = THIS_MODULE |
| }; |
| |
| static int __init atm_clip_init(void) |
| { |
| neigh_table_init_no_netlink(&clip_tbl); |
| |
| clip_tbl_hook = &clip_tbl; |
| atm_clip_ops_set(&__atm_clip_ops); |
| |
| return 0; |
| } |
| |
| static void __exit atm_clip_exit(void) |
| { |
| struct net_device *dev, *next; |
| |
| atm_clip_ops_set(NULL); |
| |
| /* First, stop the idle timer, so it stops banging |
| * on the table. |
| */ |
| if (start_timer == 0) |
| del_timer(&idle_timer); |
| |
| /* Next, purge the table, so that the device |
| * unregister loop below does not hang due to |
| * device references remaining in the table. |
| */ |
| neigh_ifdown(&clip_tbl, NULL); |
| |
| dev = clip_devs; |
| while (dev) { |
| next = PRIV(dev)->next; |
| unregister_netdev(dev); |
| kfree(dev); |
| dev = next; |
| } |
| |
| /* Now it is safe to fully shutdown whole table. */ |
| neigh_table_clear(&clip_tbl); |
| |
| clip_tbl_hook = NULL; |
| } |
| |
| module_init(atm_clip_init); |
| module_exit(atm_clip_exit); |
| |
| MODULE_LICENSE("GPL"); |