#
# ISDN device configuration
#

# only included if CONFIG_ISDN != n

define_bool CONFIG_ISDN_BOOL y
if [ "$CONFIG_INET" != "n" ]; then
   bool '  Support synchronous PPP' CONFIG_ISDN_PPP
   if [ "$CONFIG_ISDN_PPP" != "n" ]; then
      dep_bool     '    PPP filtering for ISDN' CONFIG_IPPP_FILTER $CONFIG_FILTER
      bool         '    Use VJ-compression with synchronous PPP' CONFIG_ISDN_PPP_VJ
      bool         '    Support generic MP (RFC 1717)' CONFIG_ISDN_MPP
      dep_tristate '    Support BSD compression' CONFIG_ISDN_PPP_BSDCOMP $CONFIG_ISDN
   fi
fi
bool '  Support audio via ISDN' CONFIG_ISDN_AUDIO
if [ "$CONFIG_ISDN_AUDIO" != "n" ]; then
   bool '    Support AT-Fax Class 1 and 2 commands' CONFIG_ISDN_TTY_FAX
fi
if [ "$CONFIG_X25" != "n" ]; then
   bool '  X.25 PLP on top of ISDN' CONFIG_ISDN_X25
fi

mainmenu_option next_comment
comment 'ISDN feature submodules'
   dep_tristate 'isdnloop support' CONFIG_ISDN_DRV_LOOP $CONFIG_ISDN
   dep_tristate 'Support isdn diversion services' CONFIG_ISDN_DIVERSION $CONFIG_ISDN
endmenu

comment 'low-level hardware drivers'

mainmenu_option next_comment
comment 'Passive ISDN cards'
dep_tristate 'HiSax SiemensChipSet driver support' CONFIG_ISDN_DRV_HISAX $CONFIG_ISDN
if [ "$CONFIG_ISDN_DRV_HISAX" != "n" ]; then
   define_bool CONFIG_ISDN_HISAX y
   comment '  D-channel protocol features'
   bool '  HiSax Support for EURO/DSS1' CONFIG_HISAX_EURO
   if [ "$CONFIG_HISAX_EURO" != "n" ]; then
      bool '    Support for german chargeinfo' CONFIG_DE_AOC
      bool '    Disable sending complete' CONFIG_HISAX_NO_SENDCOMPLETE
      bool '    Disable sending low layer compatibility' CONFIG_HISAX_NO_LLC
      bool '    Disable keypad protocol option' CONFIG_HISAX_NO_KEYPAD
   fi
   bool '  HiSax Support for german 1TR6' CONFIG_HISAX_1TR6
   bool '  HiSax Support for US NI1' CONFIG_HISAX_NI1
   int  '  Maximum number of cards supported by HiSax' CONFIG_HISAX_MAX_CARDS 8
   comment '  HiSax supported cards'
   if [ "$CONFIG_ISA" != "n" ]; then
      bool '  Teles 16.0/8.0' CONFIG_HISAX_16_0
      bool '  Teles 16.3 or PNP or PCMCIA' CONFIG_HISAX_16_3
      bool '  AVM A1 (Fritz)' CONFIG_HISAX_AVM_A1
      bool '  ITK ix1-micro Revision 2' CONFIG_HISAX_IX1MICROR2
      bool '  ASUSCOM ISA cards' CONFIG_HISAX_ASUSCOM
      bool '  TELEINT cards' CONFIG_HISAX_TELEINT
      bool '  HFC-S based cards' CONFIG_HISAX_HFCS
      bool '  USR Sportster internal TA' CONFIG_HISAX_SPORTSTER
      bool '  MIC card' CONFIG_HISAX_MIC
      bool '  Siemens I-Surf card' CONFIG_HISAX_ISURF
      bool '  HST Saphir card' CONFIG_HISAX_HSTSAPHIR
   fi
   bool '  Teles PCI' CONFIG_HISAX_TELESPCI 
   bool '  Teles S0Box' CONFIG_HISAX_S0BOX 
   bool '  AVM PnP/PCI (Fritz!PnP/PCI)' CONFIG_HISAX_FRITZPCI
   bool '  AVM A1 PCMCIA (Fritz)' CONFIG_HISAX_AVM_A1_PCMCIA
   bool '  Elsa cards' CONFIG_HISAX_ELSA
   bool '  Eicon.Diehl Diva cards' CONFIG_HISAX_DIEHLDIVA
   bool '  Sedlbauer cards' CONFIG_HISAX_SEDLBAUER
   bool '  NETjet card' CONFIG_HISAX_NETJET
   bool '  NETspider U card' CONFIG_HISAX_NETJET_U
   bool '  Niccy PnP/PCI card' CONFIG_HISAX_NICCY
   bool '  Telekom A4T card' CONFIG_HISAX_BKM_A4T
   bool '  Scitel Quadro card' CONFIG_HISAX_SCT_QUADRO
   bool '  Gazel cards' CONFIG_HISAX_GAZEL
   bool '  HFC PCI-Bus cards' CONFIG_HISAX_HFC_PCI
   bool '  Winbond W6692 based cards' CONFIG_HISAX_W6692
   bool '  HFC-S+, HFC-SP, HFC-PCMCIA cards' CONFIG_HISAX_HFC_SX
   if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
#      bool '  TESTEMULATOR (EXPERIMENTAL)' CONFIG_HISAX_TESTEMU
      bool '  Formula-n enter:now PCI card' CONFIG_HISAX_ENTERNOW_PCI
      if [ "$ARCH" = "sparc" -o "$ARCH" = "sparc64" ]; then
	 bool '  Am7930' CONFIG_HISAX_AMD7930
      fi
   fi
   bool '  HiSax debugging' CONFIG_HISAX_DEBUG

   dep_tristate 'Sedlbauer PCMCIA cards'                              CONFIG_HISAX_SEDLBAUER_CS  $CONFIG_ISDN_DRV_HISAX $CONFIG_PCMCIA
   dep_tristate 'ELSA PCMCIA MicroLink cards'                         CONFIG_HISAX_ELSA_CS       $CONFIG_ISDN_DRV_HISAX $CONFIG_PCMCIA
   dep_tristate 'AVM A1 PCMCIA cards'                                 CONFIG_HISAX_AVM_A1_CS     $CONFIG_ISDN_DRV_HISAX $CONFIG_PCMCIA $CONFIG_HISAX_AVM_A1_PCMCIA
   dep_tristate 'ST5481 USB ISDN modem (EXPERIMENTAL)'                CONFIG_HISAX_ST5481        $CONFIG_ISDN_DRV_HISAX    $CONFIG_EXPERIMENTAL
   dep_tristate 'AVM Fritz!Card PCI/PCIv2/PnP support (EXPERIMENTAL)' CONFIG_HISAX_FRITZ_PCIPNP  $CONFIG_ISDN_DRV_HISAX                $CONFIG_EXPERIMENTAL
   dep_tristate 'Auerswald devices ISDN support'                      CONFIG_USB_AUERISDN        $CONFIG_ISDN_DRV_HISAX

fi
endmenu

### Active ISDN cards

mainmenu_option next_comment
comment 'Active ISDN cards'

dep_tristate       'ICN 2B and 4B support' CONFIG_ISDN_DRV_ICN $CONFIG_ISDN
dep_tristate       'PCBIT-D support' CONFIG_ISDN_DRV_PCBIT $CONFIG_ISDN
dep_tristate       'Spellcaster support' CONFIG_ISDN_DRV_SC $CONFIG_ISDN
dep_tristate       'IBM Active 2000 support' CONFIG_ISDN_DRV_ACT2000 $CONFIG_ISDN

bool               'Eicon active card support' CONFIG_ISDN_DRV_EICON
if [ "$CONFIG_ISDN_DRV_EICON" != "n" ]; then
   if [ "$CONFIG_ISDN_DRV_EICON_OLD" != "y" ]; then
      dep_tristate '  Build Eicon driver type standalone' CONFIG_ISDN_DRV_EICON_DIVAS $CONFIG_ISDN $CONFIG_PCI
   fi
   if [ "$CONFIG_ISDN_DRV_EICON_DIVAS" != "y" ]; then
      dep_tristate '  Legacy Eicon driver' CONFIG_ISDN_DRV_EICON_OLD $CONFIG_ISDN
      if [ "$CONFIG_ISDN_DRV_EICON_OLD" != "n" ]; then
         dep_bool  '    Eicon PCI DIVA Server BRI/PRI/4BRI support' CONFIG_ISDN_DRV_EICON_PCI $CONFIG_PCI
         bool      '    Eicon S,SX,SCOM,Quadro,S2M support' CONFIG_ISDN_DRV_EICON_ISA
      fi
   fi
fi

if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
   dep_tristate    'Auvertech TurboPAM support' CONFIG_ISDN_DRV_TPAM $CONFIG_ISDN $CONFIG_PCI
fi

# CAPI subsystem

tristate           'CAPI2.0 support' CONFIG_ISDN_CAPI
if [ "$CONFIG_ISDN_CAPI" != "n" ]; then
   bool            '  Verbose reason code reporting (kernel size +=7K)' CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON
   dep_bool        '  CAPI2.0 Middleware support (EXPERIMENTAL)' CONFIG_ISDN_CAPI_MIDDLEWARE $CONFIG_EXPERIMENTAL
   dep_tristate    '  CAPI2.0 /dev/capi support' CONFIG_ISDN_CAPI_CAPI20 $CONFIG_ISDN_CAPI
   if [ "$CONFIG_ISDN_CAPI_MIDDLEWARE" = "y" ]; then
      dep_mbool    '    CAPI2.0 filesystem support' CONFIG_ISDN_CAPI_CAPIFS_BOOL $CONFIG_ISDN_CAPI_CAPI20
      if [ "$CONFIG_ISDN_CAPI_CAPIFS_BOOL" = "y" ]; then
	 define_tristate CONFIG_ISDN_CAPI_CAPIFS $CONFIG_ISDN_CAPI_CAPI20
      else
	 define_tristate CONFIG_ISDN_CAPI_CAPIFS n
      fi
   fi
   dep_tristate    '  CAPI2.0 capidrv interface support' CONFIG_ISDN_CAPI_CAPIDRV $CONFIG_ISDN_CAPI $CONFIG_ISDN
fi

# CAPI drivers

if [ "$CONFIG_ISDN_CAPI" != "n" ]; then
   dep_tristate '  AVM B1 ISA support' CONFIG_ISDN_DRV_AVMB1_B1ISA $CONFIG_ISDN_CAPI
   dep_tristate '  AVM B1 PCI support' CONFIG_ISDN_DRV_AVMB1_B1PCI $CONFIG_ISDN_CAPI $CONFIG_PCI
   dep_mbool    '    AVM B1 PCI V4 support' CONFIG_ISDN_DRV_AVMB1_B1PCIV4 $CONFIG_ISDN_DRV_AVMB1_B1PCI
   dep_tristate '  AVM T1/T1-B ISA support' CONFIG_ISDN_DRV_AVMB1_T1ISA $CONFIG_ISDN_CAPI
   dep_tristate '  AVM B1/M1/M2 PCMCIA support' CONFIG_ISDN_DRV_AVMB1_B1PCMCIA $CONFIG_ISDN_CAPI
   dep_tristate '  AVM B1/M1/M2 PCMCIA cs module' CONFIG_ISDN_DRV_AVMB1_AVM_CS $CONFIG_ISDN_DRV_AVMB1_B1PCMCIA $CONFIG_PCMCIA
   dep_tristate '  AVM T1/T1-B PCI support' CONFIG_ISDN_DRV_AVMB1_T1PCI $CONFIG_ISDN_CAPI $CONFIG_PCI
   dep_tristate '  AVM C4/C2 support' CONFIG_ISDN_DRV_AVMB1_C4 $CONFIG_ISDN_CAPI $CONFIG_PCI
fi

# HYSDN

dep_tristate '  Hypercope HYSDN cards (Champ, Ergo, Metro) support (module only)' CONFIG_HYSDN m $CONFIG_PROC_FS
dep_mbool    '    HYSDN CAPI 2.0 support' CONFIG_HYSDN_CAPI $CONFIG_HYSDN $CONFIG_ISDN_CAPI
endmenu