#
# Local PCMCIA Configuration File
#
#----------------------------------------------------------------------
#
# System resources available for PCMCIA cards
#
# NOTE: these settings have no effect on resources assigned to a
# CardBus bridge device itself; this file only affects resources
# assigned to cards.  Also, interrupt settings here will only affect
# ISA bus interrupts assigned to 16-bit cards.  PCI interrupts
# generally can't be reconfigured.
#
# With the kernel PCMCIA subsystem, these settings also have no effect
# at all on resources used for 32-bit CardBus cards.  Those are set by
# the PCI hotplug subsystem.
#

# Allow all the dino/cujo port ranges (usually we get the first one)
# NOTE: the address range for this is a signed short (hence the upper
# limit is 0x7fff).  If the PCMCIA card isn't on the dino/cujo bus
# which has been assigned this range, you're out of luck.  In
# particular, PCMCIA won't work in a box with an EISA subsystem
# because that claims 0-0xffff.
include port 0x0-0x7fff

# Allow all parisc I/O space
include memory 0xf0000000-0xffffffff