repos.conf - pub/scm/utils/grokmirror/grokmirror - Git at Google

 # You can pull from multiple grok mirrors, just create
 # a separate section for each mirror. The name can be anything.
 [kernel.org]
 # The host part of the mirror you're pulling from.
 #site = git://git.kernel.org
 site = git://git.kernel.org
 #
 # Where the grok manifest is published. The following protocols
 # are supported at this time:
 # http:// or https:// using If-Modified-Since http header
 # file:// (when manifest file is on NFS, for example)
 #manifest = http://git.kernel.org/manifest.js.gz
 manifest = http://git.kernel.org/manifest.js.gz
 #
 # Where are we going to put the mirror on our disk?
 #toplevel = /var/lib/git/mirror
 toplevel = /var/lib/git/mirror
 #
 # Where do we store our own manifest? Usually in the toplevel.
 #mymanifest = /var/lib/git/mirror/manifest.js.gz
 mymanifest = /var/lib/git/mirror/manifest.js.gz
 #
 # Write out projects.list that can be used by gitweb or cgit.
 # Leave blank if you don't want a projects.list.
 #projectslist = /var/lib/git/mirror/projects.list
 projectslist = /var/lib/git/mirror/projects.list
 #
 # When generating projects.list, start at this subpath instead
 # of at the toplevel. Useful when mirroring kernel or when generating
 # multiple gitweb/cgit configurations for the same tree.
 #projectslist_trimtop = /pub/scm/
 projectslist_trimtop = /pub/scm/
 #
 # The default behaviour is to use cross-repository references (if present)
 # to set git alternates between projects. This helps both significantly
 # reduce the bandwidth during cloning and dramatically reduce the mirror size
 # on disk. If for some reason you always want to create non-shared repositories,
 # set ignore_repo_references to "yes"
 # NOTE: this will NOT remove alternates for repositories already mirrored. You
 # will need to run "git repack -a" and then manually remove the
 # objects/info/alternates file for each repository.
 #ignore_repo_references = no
 #
 # When generating projects.list, also create entries for symlinks.
 # Otherwise we assume they are just legacy and keep them out of
 # web interfaces.
 #projectslist_symlinks = yes
 projectslist_symlinks = no
 #
 # A simple hook to execute whenever a repository is modified.
 # It passes the full path to the git repository modified as the only
 # argument.
 #post_update_hook = /usr/local/bin/make-git-fairies-appear
 post_update_hook =
 #
 # This prevents catastrophic mirror purges when our upstream master gives us
 # a manifest that is dramatically smaller than ours. The default is to refuse
 # the purge if the remote manifest has over 10% fewer repositories than what we
 # have, or in other words, if we have 100 repos and the remote manifest has
 # shrunk to 95 repos or less, we refuse to purge, suspecting that something has
 # gone wrong. You can set purgeprotect to a higher percentage, or override
 # it entirely with --force-purge commandline flag.
 #purgeprotect = 5
 purgeprotect = 5
 #
 # If owner is not specified in the manifest, who should be listed
 # as the default owner in tools like gitweb or cgit?
 #default_owner = Grokmirror User
 default_owner = Grokmirror User
 #
 # Where do we put the logs?
 #log = /var/log/mirror/kernelorg.log
 log = /var/log/mirror/kernelorg.log
 #
 # Log level can be "info" or "debug"
 #loglevel = info
 loglevel = info
 #
 # To speed up updates, grok-pull will use multiple threads. Please be
 # considerate to the mirror you're pulling from and don't set this very
 # high. You may also run into per-ip multiple session limits, so leave this
 # number at a nice low setting.
 #pull_threads = 5
 pull_threads = 5
 #
 # Use shell-globbing to list the repositories you would like to mirror.
 # If you want to mirror everything, just say "*". Separate multiple entries
 # with newline plus tab. Examples:
 #
 # mirror everything:
 #include = *
 #
 # mirror just the main kernel sources:
 #include = /pub/scm/linux/kernel/git/torvalds/linux.git
 #          /pub/scm/linux/kernel/git/stable/linux-stable.git
 #          /pub/scm/linux/kernel/git/next/linux-next.git
 #
 # mirror just git:
 #include = /pub/scm/git/*
 include = *
 #
 # This is processed after the include. If you want to exclude some specific
 # entries from an all-inclusive globbing above. E.g., to exclude all linux-2.4
 # git sources:
 #exclude = */linux-2.4*
 exclude =
	# You can pull from multiple grok mirrors, just create
	# a separate section for each mirror. The name can be anything.
	[kernel.org]
	# The host part of the mirror you're pulling from.
	#site = git://git.kernel.org
	site = git://git.kernel.org
	#
	# Where the grok manifest is published. The following protocols
	# are supported at this time:
	# http:// or https:// using If-Modified-Since http header
	# file:// (when manifest file is on NFS, for example)
	#manifest = http://git.kernel.org/manifest.js.gz
	manifest = http://git.kernel.org/manifest.js.gz
	#
	# Where are we going to put the mirror on our disk?
	#toplevel = /var/lib/git/mirror
	toplevel = /var/lib/git/mirror
	#
	# Where do we store our own manifest? Usually in the toplevel.
	#mymanifest = /var/lib/git/mirror/manifest.js.gz
	mymanifest = /var/lib/git/mirror/manifest.js.gz
	#
	# Write out projects.list that can be used by gitweb or cgit.
	# Leave blank if you don't want a projects.list.
	#projectslist = /var/lib/git/mirror/projects.list
	projectslist = /var/lib/git/mirror/projects.list
	#
	# When generating projects.list, start at this subpath instead
	# of at the toplevel. Useful when mirroring kernel or when generating
	# multiple gitweb/cgit configurations for the same tree.
	#projectslist_trimtop = /pub/scm/
	projectslist_trimtop = /pub/scm/
	#
	# The default behaviour is to use cross-repository references (if present)
	# to set git alternates between projects. This helps both significantly
	# reduce the bandwidth during cloning and dramatically reduce the mirror size
	# on disk. If for some reason you always want to create non-shared repositories,
	# set ignore_repo_references to "yes"
	# NOTE: this will NOT remove alternates for repositories already mirrored. You
	# will need to run "git repack -a" and then manually remove the
	# objects/info/alternates file for each repository.
	#ignore_repo_references = no
	#
	# When generating projects.list, also create entries for symlinks.
	# Otherwise we assume they are just legacy and keep them out of
	# web interfaces.
	#projectslist_symlinks = yes
	projectslist_symlinks = no
	#
	# A simple hook to execute whenever a repository is modified.
	# It passes the full path to the git repository modified as the only
	# argument.
	#post_update_hook = /usr/local/bin/make-git-fairies-appear
	post_update_hook =
	#
	# This prevents catastrophic mirror purges when our upstream master gives us
	# a manifest that is dramatically smaller than ours. The default is to refuse
	# the purge if the remote manifest has over 10% fewer repositories than what we
	# have, or in other words, if we have 100 repos and the remote manifest has
	# shrunk to 95 repos or less, we refuse to purge, suspecting that something has
	# gone wrong. You can set purgeprotect to a higher percentage, or override
	# it entirely with --force-purge commandline flag.
	#purgeprotect = 5
	purgeprotect = 5
	#
	# If owner is not specified in the manifest, who should be listed
	# as the default owner in tools like gitweb or cgit?
	#default_owner = Grokmirror User
	default_owner = Grokmirror User
	#
	# Where do we put the logs?
	#log = /var/log/mirror/kernelorg.log
	log = /var/log/mirror/kernelorg.log
	#
	# Log level can be "info" or "debug"
	#loglevel = info
	loglevel = info
	#
	# To speed up updates, grok-pull will use multiple threads. Please be
	# considerate to the mirror you're pulling from and don't set this very
	# high. You may also run into per-ip multiple session limits, so leave this
	# number at a nice low setting.
	#pull_threads = 5
	pull_threads = 5
	#
	# Use shell-globbing to list the repositories you would like to mirror.
	# If you want to mirror everything, just say "*". Separate multiple entries
	# with newline plus tab. Examples:
	#
	# mirror everything:
	#include = *
	#
	# mirror just the main kernel sources:
	#include = /pub/scm/linux/kernel/git/torvalds/linux.git
	# /pub/scm/linux/kernel/git/stable/linux-stable.git
	# /pub/scm/linux/kernel/git/next/linux-next.git
	#
	# mirror just git:
	#include = /pub/scm/git/*
	include = *
	#
	# This is processed after the include. If you want to exclude some specific
	# entries from an all-inclusive globbing above. E.g., to exclude all linux-2.4
	# git sources:
	#exclude = /linux-2.4
	exclude =