| ####################################################################### |
| # Target-independent parts used in system and user emulation |
| universal-obj-y = |
| universal-obj-y += qemu-log.o |
| |
| ####################################################################### |
| # QObject |
| qobject-obj-y = qint.o qstring.o qdict.o qlist.o qfloat.o qbool.o |
| qobject-obj-y += qjson.o json-lexer.o json-streamer.o json-parser.o |
| qobject-obj-y += qerror.o error.o qemu-error.o |
| |
| universal-obj-y += $(qobject-obj-y) |
| |
| ####################################################################### |
| # QOM |
| qom-obj-y = qom/ |
| |
| universal-obj-y += $(qom-obj-y) |
| |
| ####################################################################### |
| # oslib-obj-y is code depending on the OS (win32 vs posix) |
| oslib-obj-y = osdep.o |
| oslib-obj-$(CONFIG_WIN32) += oslib-win32.o qemu-thread-win32.o |
| oslib-obj-$(CONFIG_POSIX) += oslib-posix.o qemu-thread-posix.o |
| |
| ####################################################################### |
| # coroutines |
| coroutine-obj-y = qemu-coroutine.o qemu-coroutine-lock.o qemu-coroutine-io.o |
| coroutine-obj-y += qemu-coroutine-sleep.o |
| ifeq ($(CONFIG_UCONTEXT_COROUTINE),y) |
| coroutine-obj-$(CONFIG_POSIX) += coroutine-ucontext.o |
| else |
| ifeq ($(CONFIG_SIGALTSTACK_COROUTINE),y) |
| coroutine-obj-$(CONFIG_POSIX) += coroutine-sigaltstack.o |
| else |
| coroutine-obj-$(CONFIG_POSIX) += coroutine-gthread.o |
| endif |
| endif |
| coroutine-obj-$(CONFIG_WIN32) += coroutine-win32.o |
| |
| ####################################################################### |
| # block-obj-y is code used by both qemu system emulation and qemu-img |
| |
| block-obj-y = cutils.o iov.o cache-utils.o qemu-option.o module.o async.o |
| block-obj-y += nbd.o block.o aio.o aes.o qemu-config.o qemu-progress.o qemu-sockets.o |
| block-obj-y += $(coroutine-obj-y) $(qobject-obj-y) $(version-obj-y) |
| block-obj-$(CONFIG_POSIX) += posix-aio-compat.o |
| block-obj-$(CONFIG_LINUX_AIO) += linux-aio.o |
| block-obj-y += block/ |
| |
| ifeq ($(CONFIG_VIRTIO)$(CONFIG_VIRTFS)$(CONFIG_PCI),yyy) |
| # Lots of the fsdev/9pcode is pulled in by vl.c via qemu_fsdev_add. |
| # only pull in the actual virtio-9p device if we also enabled virtio. |
| CONFIG_REALLY_VIRTFS=y |
| endif |
| |
| ###################################################################### |
| # Target independent part of system emulation. The long term path is to |
| # suppress *all* target specific code in case of system emulation, i.e. a |
| # single QEMU executable should support all CPUs and machines. |
| |
| common-obj-y = $(block-obj-y) blockdev.o |
| common-obj-y += net.o net/ |
| common-obj-y += qom/ |
| common-obj-y += readline.o console.o cursor.o |
| common-obj-y += $(oslib-obj-y) |
| common-obj-$(CONFIG_WIN32) += os-win32.o |
| common-obj-$(CONFIG_POSIX) += os-posix.o |
| |
| common-obj-$(CONFIG_LINUX) += fsdev/ |
| extra-obj-$(CONFIG_LINUX) += fsdev/ |
| |
| common-obj-y += tcg-runtime.o host-utils.o main-loop.o |
| common-obj-y += input.o |
| common-obj-y += buffered_file.o migration.o migration-tcp.o |
| common-obj-y += qemu-char.o #aio.o |
| common-obj-y += block-migration.o iohandler.o |
| common-obj-y += pflib.o |
| common-obj-y += bitmap.o bitops.o |
| common-obj-y += page_cache.o |
| |
| common-obj-$(CONFIG_POSIX) += migration-exec.o migration-unix.o migration-fd.o |
| common-obj-$(CONFIG_WIN32) += version.o |
| |
| common-obj-$(CONFIG_SPICE) += spice-qemu-char.o |
| |
| common-obj-y += audio/ |
| common-obj-y += hw/ |
| common-obj-y += ui/ |
| common-obj-y += bt-host.o bt-vhci.o |
| |
| common-obj-y += iov.o acl.o |
| common-obj-$(CONFIG_POSIX) += compatfd.o |
| common-obj-y += notify.o event_notifier.o |
| common-obj-y += qemu-timer.o qemu-timer-common.o |
| |
| common-obj-$(CONFIG_SLIRP) += slirp/ |
| |
| ###################################################################### |
| # libseccomp |
| ifeq ($(CONFIG_SECCOMP),y) |
| common-obj-y += qemu-seccomp.o |
| endif |
| |
| ###################################################################### |
| # libuser |
| |
| user-obj-y = |
| user-obj-y += envlist.o path.o |
| user-obj-y += tcg-runtime.o host-utils.o |
| user-obj-y += cutils.o iov.o cache-utils.o |
| user-obj-y += module.o |
| user-obj-y += qemu-user.o |
| user-obj-y += $(trace-obj-y) |
| user-obj-y += qom/ |
| |
| ###################################################################### |
| # libhw |
| |
| hw-obj-y = vl.o dma-helpers.o qtest.o hw/ |
| |
| ###################################################################### |
| # libdis |
| # NOTE: the disassembler code is only needed for debugging |
| |
| libdis-y = |
| libdis-$(CONFIG_ALPHA_DIS) += alpha-dis.o |
| libdis-$(CONFIG_ARM_DIS) += arm-dis.o |
| libdis-$(CONFIG_CRIS_DIS) += cris-dis.o |
| libdis-$(CONFIG_HPPA_DIS) += hppa-dis.o |
| libdis-$(CONFIG_I386_DIS) += i386-dis.o |
| libdis-$(CONFIG_IA64_DIS) += ia64-dis.o |
| libdis-$(CONFIG_M68K_DIS) += m68k-dis.o |
| libdis-$(CONFIG_MICROBLAZE_DIS) += microblaze-dis.o |
| libdis-$(CONFIG_MIPS_DIS) += mips-dis.o |
| libdis-$(CONFIG_PPC_DIS) += ppc-dis.o |
| libdis-$(CONFIG_S390_DIS) += s390-dis.o |
| libdis-$(CONFIG_SH4_DIS) += sh4-dis.o |
| libdis-$(CONFIG_SPARC_DIS) += sparc-dis.o |
| libdis-$(CONFIG_LM32_DIS) += lm32-dis.o |
| |
| ###################################################################### |
| # trace |
| |
| ifeq ($(TRACE_BACKEND),dtrace) |
| TRACE_H_EXTRA_DEPS=trace-dtrace.h |
| endif |
| trace.h: trace.h-timestamp $(TRACE_H_EXTRA_DEPS) |
| trace.h-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak |
| $(call quiet-command,$(TRACETOOL) \ |
| --format=h \ |
| --backend=$(TRACE_BACKEND) \ |
| < $< > $@," GEN trace.h") |
| @cmp -s $@ trace.h || cp $@ trace.h |
| |
| trace.c: trace.c-timestamp |
| trace.c-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak |
| $(call quiet-command,$(TRACETOOL) \ |
| --format=c \ |
| --backend=$(TRACE_BACKEND) \ |
| < $< > $@," GEN trace.c") |
| @cmp -s $@ trace.c || cp $@ trace.c |
| |
| trace.o: trace.c $(GENERATED_HEADERS) |
| |
| trace-dtrace.h: trace-dtrace.dtrace |
| $(call quiet-command,dtrace -o $@ -h -s $<, " GEN trace-dtrace.h") |
| |
| # Normal practice is to name DTrace probe file with a '.d' extension |
| # but that gets picked up by QEMU's Makefile as an external dependency |
| # rule file. So we use '.dtrace' instead |
| trace-dtrace.dtrace: trace-dtrace.dtrace-timestamp |
| trace-dtrace.dtrace-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak |
| $(call quiet-command,$(TRACETOOL) \ |
| --format=d \ |
| --backend=$(TRACE_BACKEND) \ |
| < $< > $@," GEN trace-dtrace.dtrace") |
| @cmp -s $@ trace-dtrace.dtrace || cp $@ trace-dtrace.dtrace |
| |
| trace-dtrace.o: trace-dtrace.dtrace $(GENERATED_HEADERS) |
| $(call quiet-command,dtrace -o $@ -G -s $<, " GEN trace-dtrace.o") |
| |
| ifeq ($(LIBTOOL),) |
| trace-dtrace.lo: trace-dtrace.dtrace |
| @echo "missing libtool. please install and rerun configure."; exit 1 |
| else |
| trace-dtrace.lo: trace-dtrace.dtrace |
| $(call quiet-command,$(LIBTOOL) --mode=compile --tag=CC dtrace -o $@ -G -s $<, " lt GEN trace-dtrace.o") |
| endif |
| |
| trace/simple.o: trace/simple.c $(GENERATED_HEADERS) |
| |
| trace-obj-$(CONFIG_TRACE_DTRACE) += trace-dtrace.o |
| ifneq ($(TRACE_BACKEND),dtrace) |
| trace-obj-y = trace.o |
| endif |
| |
| trace-obj-$(CONFIG_TRACE_DEFAULT) += trace/default.o |
| trace-obj-$(CONFIG_TRACE_SIMPLE) += trace/simple.o |
| trace-obj-$(CONFIG_TRACE_SIMPLE) += qemu-timer-common.o |
| trace-obj-$(CONFIG_TRACE_STDERR) += trace/stderr.o |
| trace-obj-y += trace/control.o |
| |
| $(trace-obj-y): $(GENERATED_HEADERS) |
| |
| ###################################################################### |
| # smartcard |
| |
| libcacard-y += libcacard/cac.o libcacard/event.o |
| libcacard-y += libcacard/vcard.o libcacard/vreader.o |
| libcacard-y += libcacard/vcard_emul_nss.o |
| libcacard-y += libcacard/vcard_emul_type.o |
| libcacard-y += libcacard/card_7816.o |
| |
| common-obj-$(CONFIG_SMARTCARD_NSS) += $(libcacard-y) |
| |
| ###################################################################### |
| # qapi |
| |
| qapi-obj-y = qapi/ |
| qapi-obj-y += qapi-types.o qapi-visit.o |
| |
| common-obj-y += qmp-marshal.o qapi-visit.o qapi-types.o |
| common-obj-y += qmp.o hmp.o |
| |
| universal-obj-y += $(qapi-obj-y) |
| |
| ###################################################################### |
| # guest agent |
| |
| qga-obj-y = qga/ qemu-ga.o module.o |
| qga-obj-$(CONFIG_WIN32) += oslib-win32.o |
| qga-obj-$(CONFIG_POSIX) += oslib-posix.o qemu-sockets.o qemu-option.o |
| |
| vl.o: QEMU_CFLAGS+=$(GPROF_CFLAGS) |
| |
| vl.o: QEMU_CFLAGS+=$(SDL_CFLAGS) |
| |
| QEMU_CFLAGS+=$(GLIB_CFLAGS) |
| |
| nested-vars += \ |
| hw-obj-y \ |
| qga-obj-y \ |
| block-obj-y \ |
| qom-obj-y \ |
| qapi-obj-y \ |
| user-obj-y \ |
| common-obj-y \ |
| extra-obj-y |
| dummy := $(call unnest-vars) |
