| dracut-027 |
| ========== |
| - dracut now has bash-completion |
| - require bash version 4 |
| - systemd module now requires systemd >= 199 |
| - dracut makes use of native systemd initrd units |
| - added hooks for new-kernel-pkg and kernel-install |
| - hostonly is now default for fedora |
| - comply with the BootLoaderSpec paths |
| http://www.freedesktop.org/wiki/Specifications/BootLoaderSpec |
| - added rescue module |
| - host_fs_types is now a hashmap |
| - new dracut argument "--regenerate-all" |
| - new dracut argument "--noimageifnotneeded" |
| - new man page dracut.bootup |
| - install all host filesystem drivers |
| - use -D_FILE_OFFSET_BITS=64 to build dracut-install |
| |
| dracut-026 |
| ========== |
| - introduce /usr/lib/dracut/dracut.conf.d/ drop-in directory |
| |
| /usr/lib/dracut/dracut.conf.d/*.conf can be overwritten by the same |
| filenames in /etc/dracut.conf.d. |
| |
| Packages should use /usr/lib/dracut/dracut.conf.d rather than |
| /etc/dracut.conf.d for drop-in configuration files. |
| |
| /etc/dracut.conf and /etc/dracut.conf.d belong to the system administrator. |
| |
| - uses systemd-198 native initrd units |
| - totally rely on the fstab-generator in systemd mode for block devices |
| - dracut systemd now uses dracut.target rather than basic.target |
| - dracut systemd services optimize themselves away |
| - fixed hostonly parameter generation |
| - turn off curl globbing (fixes IPv6) |
| - modify the udev rules on install and not runtime time |
| - enable initramfs building without kernel modules (fixed regression) |
| - in the initqueue/timeout, |
| reset the main loop counter, as we see new udev events or initqueue/work |
| - fixed udev rule installation |
| |
| dracut-025 |
| ========== |
| - do not strip signed kernel modules |
| - add sosreport script and generate /run/initramfs/sosreport.txt |
| - make short uuid specification for allow-discards work |
| - turn off RateLimit for the systemd journal |
| - fixed MAC address assignment |
| - add systemd checkisomd5 service |
| - splitout drm kernel modules from plymouth module |
| - add 'swapoff' to initramfs to fix shutdown/reboot |
| - add team device support |
| - add pre-shutdown hook |
| - kill all processes in shutdown and report remaining ones |
| - "--device" changed to "--add-device" and "add_device=" added for conf files |
| - add memory usage trace to different hook points |
| - cope with optional field #7 in /proc/self/mountinfo |
| - lots of small bugfixes |
| |
| dracut-024 |
| ========== |
| - new dracut option "--device" |
| - new dracut kernel command line options "rd.auto" |
| - new dracut kernel command line options "rd.noverifyssl" |
| - new dracut option "--kernel-cmdline" and "kernel_cmdline" option for default parameters |
| - fixes for systemd and crypto |
| - fix for kexec in shutdown, if not included in initramfs |
| - create the initramfs non-world readable |
| - prelink/preunlink in the initramfs |
| - strip binaries in the initramfs by default now |
| - various FIPS fixes |
| - various dracut-install fixes |
| |
| dracut-023 |
| ========== |
| - resume from hibernate fixes |
| - -N option for --no-hostonly |
| - support for systemd crypto handling |
| - new dracut module "crypt-loop" |
| - deprecate the old kernel command line options |
| - more documentation |
| - honor CFLAGS for dracut-install build |
| - multipath fixes |
| - / is mounted according to rootflags parameter but forced ro at first. |
| Later it is remounted according to /etc/fstab + rootflags parameter |
| and "ro"/"rw". |
| - support for xfs / reiserfs separate journal device |
| - new "ro_mnt" option to force ro mount of / and /usr |
| - root on cifs support |
| - dracut-install: fixed issue for /var/tmp containing a symlink |
| - only lazy resolve with ldd, if the /var/tmp partition is not mounted with "noexec" |
| - i18n: fixed inclusion of "include" keymaps |
| |
| dracut-022 |
| ========== |
| - fixed host-only kernel module bug |
| |
| dracut-021 |
| ========== |
| - fixed systemd in the initramfs (requires systemd >= 187) |
| - dracut-install: massive speedup with /var on the same filesystem with COW copy |
| - dracut-install: moved to /usr/lib/dracut until it becomes a general purpose tool |
| - new options: "rd.usrmount.ro" and "rd.skipfsck" |
| - less mount/umount |
| - apply "ro" on the kernel command line also to /usr |
| - mount according to fstab, if neither "ro" or "rw" is specified |
| - skip fsck for xfs and btrfs. remount is enough |
| - give emergency_shell if /usr mount failed |
| - dracut now uses getopt: |
| * options can be position independent now!! |
| * we can now use --option=<arg> |
| - added option "--kver=<kernel-version>", and the image location can be omitted |
| # dracut --kver 3.5.0-0.rc7.git1.2.fc18.x86_64 |
| - dracut.sh: for --include copy also the symbolic links |
| - man pages: lsinitrd and mkinitrd added |
| - network: We do not support renaming in the kernel namespace anymore (as udev does |
| that not anymore). So, if a user wants to use ifname, he has to rename |
| to a custom namespace. "eth[0-9]+" is not allowed anymore. !!!!! |
| - resume: moved the resume process to the initqueue. |
| This should prevent accidently mounting the root file system. |
| - testsuite: add support for: make V=1 TESTS="01 20 40" check |
| $ sudo make V=1 clean check |
| now runs the testsuite in verbose mode |
| |
| $ sudo make TESTS="01 20 40" clean check |
| now only runs the 01, 20 and 40 tests. |
| |
| dracut-020 |
| ========== |
| - changed rd.dasd kernel parameter |
| - arm kernel modules added to kernel-modules |
| - make udevdir systemdutildir systemdsystemunitdir global vars |
| your distribution should ship those settings in |
| /etc/dracut.conf.d/01-distro.conf |
| see dracut.conf.d/fedora.conf.example |
| - kernel modules are now only handled with /sys/modules and modules.dep |
| - systemd fixups |
| - mdraid: wait for md devices to be clean, before shutdown |
| - ifup fixed for ipv6 |
| - add PARTUUID as root=PARTUUID=<partition uuid> parameter |
| - fixed instmods() return code and set pipefail globally |
| - add 04watchdog dracut module |
| - dracut-shutdown.service: fixed ordering to be before shutdown.target |
| - make use of "ln -r" instead of shell functions, if new coreutils is installed |
| - network: support vlan tagged bonding |
| - new dracut module qemu and qemu-net to install all kernel driver |
| - fs-lib/fs-lib.sh: removed test mounting of btrfs and xfs |
| - no more "mknod" in the initramfs!! |
| - replaced all "tr" calls with "sed" |
| - speedup with lazy kernel module dependency resolving |
| - lots of speedup optimizations and last but not least |
| - dracut-install: |
| - new binary to significanlty speedup the installation process |
| - dracut-functions.sh makes use of it, if installed |
| |
| |
| dracut-019 |
| ========== |
| - initqueue/online hook |
| - fixes for ifcfg write out |
| - rootfs-block: avoid remount when options don't change |
| - Debian multiarch support |
| - virtfs root filesystem support |
| - cope with systemd-udevd |
| - mount tmpfs with strictatime |
| - include all kernel/drivers/net/phy drivers |
| - add debug_on() and debug_off() functions |
| - add arguments for source_hook() and source_all() |
| - cleanup hook |
| - plymouth: get consoledev from /sys/class/tty/console/active |
| - experimental systemd dracut module for systemd in the initramfs |
| - install xhci-hcd kernel module |
| - dracut: new "--mount" option |
| - lsinitrd: new option --printsize |
| - ARM storage kernel modules added |
| - s390 cms conf file support |
| - /etc/initrd-release in the initrd |
| - vlan support |
| - full bonding and bridge support |
| - removed scsi_wait_scan kernel module from standard install |
| - support rd.luks.allow-discards and honor options in crypttab |
| - lots of bugfixes |
| |
| dracut-018 |
| ========== |
| - lvm: ignore lvm mirrors |
| - lsinitrd: handle LZMA images |
| - iscsi: add rd.iscsi.param |
| - iscsi: add iscsi interface binding |
| - new module cms to read and handle z-Series cms config files |
| - fixed fstab.sys handling |
| - new dracut option "--tmpdir" |
| - new dracut option "--no-hostonly" |
| - nbd: name based nbd connects |
| - converted manpage and documentation source to asciidoc |
| - write-ifcfg fixes and cleanups |
| - ifup is now done in the initqueue |
| - netroot cleanup |
| - initqueue/online is now for hooks, which require network |
| - no more /tmp/root.info |
| - 98pollcdrom: factored out the ugly cdrom polling in the main loop |
| - simplified rd.luks.uuid testing |
| - removed "egrep" and "ls" calls |
| - speedup kernel module installation |
| - make bzip2 optional |
| - lots of bugfixes |
| |
| dracut-017 |
| ========== |
| - a _lot_ faster than dracut-016 in image creation |
| - systemd service dracut-shutdown.service |
| - livenet fixes |
| - ssh-client module install fix |
| - root=iscsi:... fixed |
| - lots of restructuring and optimizing in dracut-functions.sh |
| - usrmount: honor fs_passno in /etc/fstab |
| - renamed all shell scripts to .sh |
| - new option "--omit-drivers" and config option "omit_drivers" |
| - hostonly mode fixups |
| |
| dracut-016 |
| ========== |
| - fixed lsinitrd |
| - honor binaries in sbin first |
| - fixed usrmount module |
| - added systemd service for shutdown |
| - fixed terminfo on distros with /usr/share/terminfo |
| - reload udev rules after "pre-trigger" hook |
| - improved test suite |
| - new parameter "--omit-drivers" and new conf param omit_drivers |
| - "--offroot" support for mdraid |
| - new libs: net-lib.sh, nfs-lib.sh, url-lib.sh, img-lib.sh |
| full of functions to use in your dracut module |
| |
| dracut-015 |
| ========== |
| - hostonly mode automatically adds command line options for root and /usr |
| - --add-fstab --mount parameters |
| - ssh-client module |
| - --ctty option: add job control |
| - cleanup /run/initramfs |
| - convertfs module |
| - /sbin/ifup can be called directly |
| - support kernel modules compressed with xz |
| - s390 iscsi modules added |
| - terminfo module |
| - lsinitrd can handle concatened images |
| - lsinitrd can sort by size |
| |
| dracut-014 |
| ========== |
| - new dracut arguments: |
| --lvmconf |
| --nolvmconf |
| --fscks [LIST] |
| --nofscks |
| - new .conf options: |
| install_items |
| fscks |
| nofscks |
| - new kernel options: |
| rd.md.ddf |
| rd.md.waitclean |
| plymouth.enable |
| - dracut move from /sbin to /usr/bin |
| - dracut modules dir moved from /usr/share/dracut to /usr/lib/dracut |
| - profiling with "dracut --profile" |
| - new TEST-16-DMSQUASH, test for Fedora LiveCDs |
| - speedup of initramfs creation |
| - ask_for_password fallback to CLI |
| - mdraid completely switched to incremental assembly |
| - no more cdrom polling |
| - "switch_root" breakpoint is now very late |
| - /dev/live is gone |
| - /dev/root is gone |
| - fs-lib dracut module for fscks added |
| - xen dracut module removed |
| - usb mass storage kernel drivers now included |
| - usrmount dracut module added: |
| mount /usr if found in /sysroot/etc/fstab |
| - only include fsck helper needed for hostonly |
| - fcoe: support for bnx2fc |
| - support iSCSI drivers: qla4xxx, cxgb3i, cxgb4i, bnx2i, be2iscsi |
| - fips-aesni dracut module added |
| - add install_items to dracut.conf |
| install_items+=" <file>[ <file> ...] " |
| - speedup internal testsuite |
| - internal testsuite: store temporary data in a temporary dir |
| |
| dracut-013 |
| ========== |
| - speedup of initramfs creation |
| - fixed inst_dir for symbolic links |
| - add unix kernel module |
| |
| dracut-012 |
| ========== |
| - better fsck handling |
| - fixed wait condition for LVM volumes |
| - fix for hardlinks (welcome Debian! :-) |
| - shutdown bugfixes |
| - automatic busybox symlink creation |
| - try to mount /usr, if init points to a path in /usr |
| - btrfs with multiple devices |
| - "--force-add" option for dracut, to force-add dracut modules, |
| without hostonly checks |
| - lsinitrd also display the initramfs size in human readable form |
| - livenet module, to mount live-isos over http |
| - masterkey,ecryptfs,integrity security modules |
| - initqueue/timeout queue e.g. for starting degraded raids |
| - "make rpm" creates an rpm with an increasing release number from any |
| git checkout |
| - support lvm mirrors |
| - start degraded lvm mirrors after a timeout |
| - start degraded md raids after a timeout |
| - getarg() now returns wildcards without file matching to the current fs |
| - lots of bugfixes |
| |
| dracut-011 |
| ========== |
| - use udev-168 features for shutting down udev |
| - introduce "--prefix" to put all initramfs files in e.g "/run/initramfs" |
| - new shutdown script (called by systemd >= 030) to disassemble the root device |
| - lots of bugfixes |
| - new module for gpg-encrypted keys - 91crypt-gpg |
| |
| dracut-010 |
| ========== |
| - lots of bugfixes |
| - plymouth: use /run/plymouth/pid instead of /run/initramfs/plymouth |
| - add "/lib/firmware/updates" to default firmware path |
| |
| dracut-009 |
| ========== |
| - dracut generator |
| - dracut-logger |
| - xz compression |
| - better argument handling |
| |
| - initramfs |
| - hooks moved to /lib/dracut/hooks in initramfs |
| - rd.driver.{blacklist|pre|post} accept comma separated driver list |
| - iSCSI: iSCSI Boot Firmware Table (iBFT) support |
| - support for /run |
| - live image: support for generic rootfs.img (instead of ext3fs.img) |
| - caps module |
| - FCoE: EDD support |
| |
| dracut-008 |
| ========== |
| - removed --ignore-kernel-modules option (no longer necessary) |
| - renamed kernel command line arguments to follow the rd. naming scheme |
| - merged check, install, installkernel to module-setup.sh |
| - support for bzip2 and xz compressed initramfs images. |
| - source code beautification |
| - lots of documentation |
| - lsinitrd: "catinitrd" functionality |
| - dracut: --list-modules |
| - lvm: support for dynamic LVM SNAPSHOT root volume |
| - 95fstab-sys: mount all /etc/fstab.sys volumes before switch_root |
| - 96insmodpost dracut module |
| - rd.shell=1 per default |
| - rootfs-block:mount-root.sh add fsck |
| - busybox shell replacements module |
| - honor old "real_init=" |
| - 97biosdevname dracut module |
| |
| dracut-007 |
| ========== |
| - module i18n is no longer fedora/red hat specific (Amadeusz Żołnowski) |
| - distribution specific conf file |
| - bootchartd support |
| - debug module now has fsck |
| - use "hardlink", if available, to save some space |
| - /etc/dracut.conf can be overwritten by settings in /etc/dracut.conf.d/*.conf |
| - gentoo splash module |
| - --ignore-kernel-modules option |
| - crypto keys on external devices support |
| - bugfixes |
| |
| dracut-006 |
| ========== |
| - fixed mdraid with IMSM |
| - fixed dracut manpages |
| - dmraid parse different error messages |
| - add cdrom polling mechanism for slow cdroms |
| - add module btrfs |
| - add btrfsctl scan for btrfs multi-devices (raid) |
| - teach dmsquash live-root to use rootflags |
| - trigger udev with action=add |
| - fixed add_drivers handling |
| - add sr_mod |
| - use pigz instead of gzip, if available |
| - boot from LVM mirrors and snapshots |
| - iscsi: add support for multiple netroot=iscsi: |
| - Support old version of module-init-tools |
| - got rid of rdnetdebug |
| - fixed "ip=auto6" |
| - dracut.conf: use "+=" as default for config variables |
| - bugfixes |
| |
| dracut-005 |
| ========== |
| - dcb support to dracut's FCoE support |
| - add readonly overlay support for dmsquash |
| - add keyboard kernel modules |
| - dracut.conf: added add_dracutmodules |
| - add /etc/dracut.conf.d |
| - add preliminary IPv6 support |
| - bugfixes |
| |
| dracut-004 |
| ========== |
| - dracut-lib: read multiple lines from $init/etc/cmdline |
| - lsinitrd and mkinitrd |
| - dmsquash: add support for loopmounted *.iso files |
| - lvm: add rd_LVM_LV and "--poll n" |
| - user suspend support |
| - add additional drivers in host-only mode, too |
| - improved emergency shell |
| - support for compressed kernel modules |
| - support for loading Xen modules |
| - rdloaddriver kernel command line parameter |
| - man pages for dracut-catimages and dracut-gencmdline |
| - bugfixes |
| |
| dracut-003 |
| ========== |
| - add debian package modules |
| - add dracut.conf manpage |
| - add module 90multipath |
| - add module 01fips |
| - crypt: ignore devices in /etc/crypttab (root is not in there) |
| unless rd_NO_CRYPTTAB is specified |
| - kernel-modules: add scsi_dh scsi_dh_rdac scsi_dh_emc |
| - add multinic support |
| - add s390 zfcp support |
| - add s390 dasd support |
| - add s390 network support |
| - fixed dracut-gencmdline for root=UUID or LABEL |
| - do not destroy assembled raid arrays if mdadm.conf present |
| - mount /dev/shm |
| - let udevd not resolve group and user names |
| - moved network from udev to initqueue |
| - improved debug output: specifying "rdinitdebug" now logs |
| to dmesg, console and /init.log |
| - strip kernel modules which have no x bit set |
| - redirect stdin, stdout, stderr all RW to /dev/console |
| so the user can use "less" to view /init.log and dmesg |
| - add new device mapper udev rules and dmeventd |
| - fixed dracut-gencmdline for root=UUID or LABEL |
| - do not destroy assembled raid arrays if mdadm.conf present |
| - mount /dev/shm |
| - let udevd not resolve group and user names |
| - preserve timestamps of tools on initramfs generation |
| - generate symlinks for binaries correctly |
| - moved network from udev to initqueue |
| - mount nfs3 with nfsvers=3 option and retry with nfsvers=2 |
| - fixed nbd initqueue-finished |
| - improved debug output: specifying "rdinitdebug" now logs |
| to dmesg, console and /init.log |
| - strip kernel modules which have no x bit set |
| - redirect stdin, stdout, stderr all RW to /dev/console |
| so the user can use "less" to view /init.log and dmesg |
| - make install of new dm/lvm udev rules optionally |
| - add new device mapper udev rules and dmeventd |
| - Fix LiveCD boot regression |
| - bail out if selinux policy could not be loaded and |
| selinux=0 not specified on kernel command line |
| - do not cleanup dmraids |
| - copy over lvm.conf |
| |
| dracut-002 |
| ========== |
| - add ifname= argument for persistent netdev names |
| - new /initqueue-finished to check if the main loop can be left |
| - copy mdadm.conf if --mdadmconf set or mdadmconf in dracut.conf |
| - plymouth: use plymouth-populate-initrd |
| - add add_drivers for dracut and dracut.conf |
| - add modprobe scsi_wait_scan to be sure everything was scanned |
| - fix for several problems with md raid containers |
| - fix for selinux policy loading |
| - fix for mdraid for IMSM |
| - fix for bug, which prevents installing 61-persistent-storage.rules (bug #520109) |
| - fix for missing grep for md |
| |
| dracut-001 |
| ========== |
| - better --hostonly checks |
| - better lvm/mdraid/dmraid handling |
| - fcoe booting support |
| Supported cmdline formats: |
| fcoe=<networkdevice>:<dcb|nodcb> |
| fcoe=<macaddress>:<dcb|nodcb> |
| |
| Note currently only nodcb is supported, the dcb option is reserved for |
| future use. |
| |
| Note letters in the macaddress must be lowercase! |
| |
| Examples: |
| fcoe=eth0:nodcb |
| fcoe=4A:3F:4C:04:F8:D7:nodcb |
| |
| - Syslog support for dracut |
| This module provides syslog functionality in the initrd. |
| This is especially interesting when complex configuration being |
| used to provide access to the device the rootfs resides on. |
| |
| |
| dracut-0.9 |
| ========== |
| - let plymouth attach to the terminal (nice text output now) |
| - new kernel command line parameter "rdinfo" show dracut output, even when |
| "quiet" is specified |
| - rd_LUKS_UUID is now handled correctly |
| - dracut-gencmdline: rd_LUKS_UUID and rd_MD_UUID is now correctly generated |
| - now generates initrd-generic with around 15MB |
| - smaller bugfixes |
| |
| dracut-0.8 |
| ========== |
| - iSCSI with username and password |
| - support for live images (dmsquashed live images) |
| - iscsi_firmware fixes |
| - smaller images |
| - bugfixes |
| |
| dracut-0.7 |
| ========== |
| - dracut: strip binaries in initramfs |
| |
| --strip |
| strip binaries in the initramfs (default) |
| |
| --nostrip |
| do not strip binaries in the initramfs |
| - dracut-catimages |
| |
| Usage: ./dracut-catimages [OPTION]... <initramfs> <base image> |
| [<image>...] |
| Creates initial ramdisk image by concatenating several images from the |
| command |
| line and /boot/dracut/ |
| |
| -f, --force Overwrite existing initramfs file. |
| -i, --imagedir Directory with additional images to add |
| (default: /boot/dracut/) |
| -o, --overlaydir Overlay directory, which contains files that |
| will be used to create an additional image |
| --nooverlay Do not use the overlay directory |
| --noimagedir Do not use the additional image directory |
| -h, --help This message |
| --debug Output debug information of the build process |
| -v, --verbose Verbose output during the build process |
| |
| - s390 dasd support |
| |
| dracut-0.6 |
| ========== |
| - dracut: add --kernel-only and --no-kernel arguments |
| |
| --kernel-only |
| only install kernel drivers and firmware files |
| |
| --no-kernel |
| do not install kernel drivers and firmware files |
| |
| All kernel module related install commands moved from "install" |
| to "installkernel". |
| |
| For "--kernel-only" all installkernel scripts of the specified |
| modules are used, regardless of any checks, so that all modules |
| which might be needed by any dracut generic image are in. |
| |
| The basic idea is to create two images. One image with the kernel |
| modules and one without. So if the kernel changes, you only have |
| to replace one image. |
| |
| Grub and the kernel can handle multiple images, so grub entry can |
| look like this: |
| |
| title Fedora (2.6.29.5-191.fc11.i586) |
| root (hd0,0) |
| kernel /vmlinuz-2.6.29.5-191.fc11.i586 ro rhgb quiet |
| initrd /initrd-20090722.img /initrd-kernel-2.6.29.5-191.fc11.i586.img /initrd-config.img |
| |
| initrd-20090722.img |
| the image provided by the initrd rpm |
| one old backup version is kept like with the kernel |
| |
| initrd-kernel-2.6.29.5-191.fc11.i586.img |
| the image provided by the kernel rpm |
| |
| initrd-config.img |
| optional image with local configuration files |
| |
| - dracut: add --kmoddir directory, where to look for kernel modules |
| |
| -k, --kmoddir [DIR] |
| specify the directory, where to look for kernel modules |
| |
| |
| |
| dracut-0.5 |
| ========== |
| - more generic (all plymouth modules, all keyboards, all console fonts) |
| - more kernel command line parameters (see also man dracut(8)) |
| - a helper tool, which generates the kernel command line (dracut-gencmdline) |
| - bridged network boot |
| - a lot of new command line parameter |
| |
| dracut-0.4 |
| ========== |
| - bugfixes |
| - firmware loading support |
| - new internal queue (initqueue) |
| initqueue now loops until /dev/root exists or root is mounted |
| |
| init now has the following points to inject scripts: |
| |
| /cmdline/*.sh |
| scripts for command line parsing |
| |
| /pre-udev/*.sh |
| scripts to run before udev is started |
| |
| /pre-trigger/*.sh |
| scripts to run before the main udev trigger is pulled |
| |
| /initqueue/*.sh |
| runs in parallel to the udev trigger |
| Udev events can add scripts here with /sbin/initqueue. |
| If /sbin/initqueue is called with the "--onetime" option, the script |
| will be removed after it was run. |
| If /initqueue/work is created and udev >= 143 then this loop can |
| process the jobs in parallel to the udevtrigger. |
| If the udev queue is empty and no root device is found or no root |
| filesystem was mounted, the user will be dropped to a shell after |
| a timeout. |
| Scripts can remove themselves from the initqueue by "rm $job". |
| |
| /pre-mount/*.sh |
| scripts to run before the root filesystem is mounted |
| NFS is an exception, because it has no device node to be created |
| and mounts in the udev events |
| |
| /mount/*.sh |
| scripts to mount the root filesystem |
| NFS is an exception, because it has no device node to be created |
| and mounts in the udev events |
| If the udev queue is empty and no root device is found or no root |
| filesystem was mounted, the user will be dropped to a shell after |
| a timeout. |
| |
| /pre-pivot/*.sh |
| scripts to run before the real init is executed and the initramfs |
| disappears |
| All processes started before should be killed here. |
| |
| The behaviour of the dmraid module demonstrates how to use the new |
| mechanism. If it detects a device which is part of a raidmember from a |
| udev rule, it installs a job to scan for dmraid devices, if the udev |
| queue is empty. After a scan, it removes itsself from the queue. |
| |
| |
| |
| dracut-0.3 |
| ========== |
| |
| - first public version |
| |