| # |
| # Network device configuration |
| # |
| |
| source drivers/net/arcnet/Config.in |
| source drivers/net/appletalk/Config.in |
| |
| tristate 'Dummy net driver support' CONFIG_DUMMY |
| tristate 'Bonding driver support' CONFIG_BONDING |
| tristate 'EQL (serial line load balancing) support' CONFIG_EQUALIZER |
| tristate 'Universal TUN/TAP device driver support' CONFIG_TUN |
| if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then |
| tristate 'Ethertap network tap (OBSOLETE)' CONFIG_ETHERTAP |
| fi |
| |
| if [ "$CONFIG_ISAPNP" = "y" -o "$CONFIG_ISAPNP" = "m" ]; then |
| dep_tristate 'General Instruments Surfboard 1000' CONFIG_NET_SB1000 $CONFIG_ISAPNP |
| fi |
| |
| # |
| # Ethernet |
| # |
| |
| mainmenu_option next_comment |
| comment 'Ethernet (10 or 100Mbit)' |
| bool 'Ethernet (10 or 100Mbit)' CONFIG_NET_ETHERNET |
| if [ "$CONFIG_NET_ETHERNET" = "y" ]; then |
| if [ "$CONFIG_ARM" = "y" ]; then |
| dep_bool ' ARM EBSA110 AM79C961A support' CONFIG_ARM_AM79C961A $CONFIG_ARCH_EBSA110 |
| if [ "$CONFIG_ARCH_ACORN" = "y" ]; then |
| source drivers/acorn/net/Config.in |
| fi |
| fi |
| if [ "$CONFIG_PPC" = "y" ]; then |
| dep_tristate ' MACE (Power Mac ethernet) support' CONFIG_MACE $CONFIG_ALL_PPC |
| if [ "$CONFIG_MACE" != "n" ]; then |
| bool ' Use AAUI port instead of TP by default' CONFIG_MACE_AAUI_PORT |
| fi |
| dep_tristate ' BMAC (G3 ethernet) support' CONFIG_BMAC $CONFIG_ALL_PPC |
| dep_tristate ' GMAC (G4/iBook ethernet) support' CONFIG_GMAC $CONFIG_ALL_PPC |
| tristate ' National DP83902AV (Oak ethernet) support' CONFIG_OAKNET |
| fi |
| if [ "$CONFIG_ZORRO" = "y" ]; then |
| tristate ' Ariadne support' CONFIG_ARIADNE |
| tristate ' Ariadne II and X-Surf support' CONFIG_NE2K_ZORRO |
| tristate ' A2065 support' CONFIG_A2065 |
| tristate ' Hydra support' CONFIG_HYDRA |
| fi |
| if [ "$CONFIG_PARISC" = "y" ]; then |
| dep_tristate ' Lasi ethernet' CONFIG_LASI_82596 $CONFIG_GSC_LASI |
| fi |
| if [ "$CONFIG_MIPS_JAZZ" = "y" ]; then |
| tristate ' MIPS JAZZ onboard SONIC Ethernet support' CONFIG_MIPS_JAZZ_SONIC |
| fi |
| if [ "$CONFIG_MIPS_GT96100" = "y" ]; then |
| bool ' MIPS GT96100 Ethernet support' CONFIG_MIPS_GT96100ETH |
| fi |
| if [ "$CONFIG_MIPS_AU1000" = "y" ]; then |
| bool ' MIPS AU1000 Ethernet support' CONFIG_MIPS_AU1000_ENET |
| fi |
| if [ "$CONFIG_SGI_IP27" = "y" ]; then |
| bool ' SGI IOC3 Ethernet' CONFIG_SGI_IOC3_ETH |
| fi |
| if [ "$CONFIG_IA64_SGI_SN1" = "y" ]; then |
| bool ' SGI IOC3 Ethernet' CONFIG_SGI_IOC3_ETH |
| fi |
| if [ "$CONFIG_SUPERH" = "y" ]; then |
| tristate ' National DP83902AV support' CONFIG_STNIC |
| fi |
| dep_tristate ' Sun LANCE support' CONFIG_SUNLANCE $CONFIG_SBUS |
| if [ "$CONFIG_SBUS" = "y" -o "$CONFIG_PCI" = "y" ]; then |
| tristate ' Sun Happy Meal 10/100baseT support' CONFIG_HAPPYMEAL |
| fi |
| dep_tristate ' Sun BigMAC 10/100baseT support (EXPERIMENTAL)' CONFIG_SUNBMAC $CONFIG_SBUS $CONFIG_EXPERIMENTAL |
| dep_tristate ' Sun QuadEthernet support' CONFIG_SUNQE $CONFIG_SBUS |
| dep_tristate ' Sun GEM support' CONFIG_SUNGEM $CONFIG_PCI |
| bool ' 3COM cards' CONFIG_NET_VENDOR_3COM |
| if [ "$CONFIG_NET_VENDOR_3COM" = "y" ]; then |
| dep_tristate ' 3c501 "EtherLink" support' CONFIG_EL1 $CONFIG_ISA |
| dep_tristate ' 3c503 "EtherLink II" support' CONFIG_EL2 $CONFIG_ISA |
| dep_tristate ' 3c505 "EtherLink Plus" support' CONFIG_ELPLUS $CONFIG_ISA |
| dep_tristate ' 3c507 "EtherLink 16" support (EXPERIMENTAL)' CONFIG_EL16 $CONFIG_ISA $CONFIG_EXPERIMENTAL |
| if [ "$CONFIG_ISA" = "y" -o "$CONFIG_EISA" = "y" -o "$CONFIG_MCA" = "y" ]; then |
| tristate ' 3c509/3c529 (MCA)/3c579 "EtherLink III" support' CONFIG_EL3 |
| fi |
| if [ "$CONFIG_ISA" = "y" -o "$CONFIG_EISA" = "y" ]; then |
| tristate ' 3c515 ISA "Fast EtherLink"' CONFIG_3C515 |
| fi |
| dep_tristate ' 3c523 "EtherLink/MC" support' CONFIG_ELMC $CONFIG_MCA |
| dep_tristate ' 3c527 "EtherLink/MC 32" support (EXPERIMENTAL)' CONFIG_ELMC_II $CONFIG_MCA $CONFIG_EXPERIMENTAL |
| if [ "$CONFIG_PCI" = "y" -o "$CONFIG_EISA" = "y" ]; then |
| tristate ' 3c590/3c900 series (592/595/597) "Vortex/Boomerang" support' CONFIG_VORTEX |
| fi |
| fi |
| dep_tristate ' AMD LANCE and PCnet (AT1500 and NE2100) support' CONFIG_LANCE $CONFIG_ISA |
| bool ' Western Digital/SMC cards' CONFIG_NET_VENDOR_SMC |
| if [ "$CONFIG_NET_VENDOR_SMC" = "y" ]; then |
| dep_tristate ' WD80*3 support' CONFIG_WD80x3 $CONFIG_ISA |
| dep_tristate ' SMC Ultra MCA support' CONFIG_ULTRAMCA $CONFIG_MCA |
| dep_tristate ' SMC Ultra support' CONFIG_ULTRA $CONFIG_ISA |
| dep_tristate ' SMC Ultra32 EISA support' CONFIG_ULTRA32 $CONFIG_EISA |
| dep_tristate ' SMC 9194 support' CONFIG_SMC9194 $CONFIG_ISA |
| fi |
| bool ' Racal-Interlan (Micom) NI cards' CONFIG_NET_VENDOR_RACAL |
| if [ "$CONFIG_NET_VENDOR_RACAL" = "y" ]; then |
| dep_tristate ' NI5010 support (EXPERIMENTAL)' CONFIG_NI5010 $CONFIG_ISA $CONFIG_EXPERIMENTAL |
| dep_tristate ' NI5210 support' CONFIG_NI52 $CONFIG_ISA |
| dep_tristate ' NI6510 support' CONFIG_NI65 $CONFIG_ISA |
| fi |
| if [ "$CONFIG_ISA" = "y" -o "$CONFIG_MCA" = "y" ]; then |
| dep_tristate ' AT1700/1720 support (EXPERIMENTAL)' CONFIG_AT1700 $CONFIG_EXPERIMENTAL |
| fi |
| if [ "$CONFIG_ISA" = "y" -o "$CONFIG_EISA" = "y" -o "$CONFIG_MCA" = "y" ]; then |
| tristate ' DEPCA, DE10x, DE200, DE201, DE202, DE422 support' CONFIG_DEPCA |
| fi |
| if [ "$CONFIG_ISA" = "y" -o "$CONFIG_EISA" = "y" -o "$CONFIG_PCI" = "y" ]; then |
| tristate ' HP 10/100VG PCLAN (ISA, EISA, PCI) support' CONFIG_HP100 |
| fi |
| dep_bool ' Other ISA cards' CONFIG_NET_ISA $CONFIG_ISA |
| if [ "$CONFIG_NET_ISA" = "y" ]; then |
| tristate ' Cabletron E21xx support' CONFIG_E2100 |
| tristate ' EtherWORKS 3 (DE203, DE204, DE205) support' CONFIG_EWRK3 |
| tristate ' EtherExpress 16 support' CONFIG_EEXPRESS |
| tristate ' EtherExpressPro support/EtherExpress 10 (i82595) support' CONFIG_EEXPRESS_PRO |
| if [ "$CONFIG_OBSOLETE" = "y" ]; then |
| tristate ' FMV-181/182/183/184 support' CONFIG_FMV18X |
| fi |
| tristate ' HP PCLAN+ (27247B and 27252A) support' CONFIG_HPLAN_PLUS |
| tristate ' HP PCLAN (27245 and other 27xxx series) support' CONFIG_HPLAN |
| tristate ' LP486E on board Ethernet' CONFIG_LP486E |
| tristate ' ICL EtherTeam 16i/32 support' CONFIG_ETH16I |
| tristate ' NE2000/NE1000 support' CONFIG_NE2000 |
| if [ "$CONFIG_OBSOLETE" = "y" ]; then |
| dep_tristate ' SEEQ8005 support (EXPERIMENTAL)' CONFIG_SEEQ8005 $CONFIG_EXPERIMENTAL |
| fi |
| if [ "$CONFIG_OBSOLETE" = "y" ]; then |
| tristate ' SK_G16 support' CONFIG_SK_G16 |
| fi |
| fi |
| if [ "$CONFIG_MCA" = "y" ]; then |
| tristate ' SKnet MCA support' CONFIG_SKMC |
| tristate ' NE/2 (ne2000 MCA version) support' CONFIG_NE2_MCA |
| tristate ' IBM LAN Adapter/A support' CONFIG_IBMLANA |
| fi |
| if [ "$CONFIG_ISA" = "y" -o "$CONFIG_EISA" = "y" -o "$CONFIG_PCI" = "y" ]; then |
| bool ' EISA, VLB, PCI and on board controllers' CONFIG_NET_PCI |
| else |
| define_bool CONFIG_NET_PCI n |
| fi |
| if [ "$CONFIG_NET_PCI" = "y" ]; then |
| dep_tristate ' AMD PCnet32 PCI support' CONFIG_PCNET32 $CONFIG_PCI |
| dep_tristate ' Adaptec Starfire support (EXPERIMENTAL)' CONFIG_ADAPTEC_STARFIRE $CONFIG_PCI $CONFIG_EXPERIMENTAL |
| if [ "$CONFIG_ISA" = "y" -o "$CONFIG_EISA" = "y" ]; then |
| dep_tristate ' Ansel Communications EISA 3200 support (EXPERIMENTAL)' CONFIG_AC3200 $CONFIG_EXPERIMENTAL |
| fi |
| |
| dep_tristate ' Apricot Xen-II on board Ethernet' CONFIG_APRICOT $CONFIG_ISA |
| dep_tristate ' CS89x0 support' CONFIG_CS89x0 $CONFIG_ISA |
| dep_tristate ' Early DECchip Tulip (dc2104x) PCI support (EXPERIMENTAL)' CONFIG_DE2104X $CONFIG_PCI $CONFIG_EXPERIMENTAL |
| dep_tristate ' DECchip Tulip (dc2114x) PCI support' CONFIG_TULIP $CONFIG_PCI |
| if [ "$CONFIG_TULIP" = "y" -o "$CONFIG_TULIP" = "m" ]; then |
| dep_bool ' New bus configuration (EXPERIMENTAL)' CONFIG_TULIP_MWI $CONFIG_EXPERIMENTAL |
| bool ' Use PCI shared mem for NIC registers' CONFIG_TULIP_MMIO |
| fi |
| if [ "$CONFIG_PCI" = "y" -o "$CONFIG_EISA" = "y" ]; then |
| tristate ' Generic DECchip & DIGITAL EtherWORKS PCI/EISA' CONFIG_DE4X5 |
| tristate ' Digi Intl. RightSwitch SE-X support' CONFIG_DGRS |
| fi |
| dep_tristate ' Davicom DM910x/DM980x support' CONFIG_DM9102 $CONFIG_PCI |
| dep_tristate ' EtherExpressPro/100 support' CONFIG_EEPRO100 $CONFIG_PCI |
| dep_tristate ' Mylex EISA LNE390A/B support (EXPERIMENTAL)' CONFIG_LNE390 $CONFIG_EISA $CONFIG_EXPERIMENTAL |
| dep_tristate ' Myson MTD-8xx PCI Ethernet support' CONFIG_FEALNX $CONFIG_PCI |
| dep_tristate ' National Semiconductor DP8381x series PCI Ethernet support' CONFIG_NATSEMI $CONFIG_PCI |
| if [ "$CONFIG_NATSEMI" = "y" -o "$CONFIG_NATSEMI" = "m" ]; then |
| bool ' NatSemi workaround for high errors' CONFIG_NATSEMI_CABLE_MAGIC |
| fi |
| dep_tristate ' PCI NE2000 and clones support (see help)' CONFIG_NE2K_PCI $CONFIG_PCI |
| dep_tristate ' Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)' CONFIG_NE3210 $CONFIG_EISA $CONFIG_EXPERIMENTAL |
| dep_tristate ' Racal-Interlan EISA ES3210 support (EXPERIMENTAL)' CONFIG_ES3210 $CONFIG_EISA $CONFIG_EXPERIMENTAL |
| dep_tristate ' RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)' CONFIG_8139CP $CONFIG_PCI $CONFIG_EXPERIMENTAL |
| dep_tristate ' RealTek RTL-8139 PCI Fast Ethernet Adapter support' CONFIG_8139TOO $CONFIG_PCI |
| dep_mbool ' Use PIO instead of MMIO' CONFIG_8139TOO_PIO $CONFIG_8139TOO |
| dep_mbool ' Support for automatic channel equalization (EXPERIMENTAL)' CONFIG_8139TOO_TUNE_TWISTER $CONFIG_8139TOO $CONFIG_EXPERIMENTAL |
| dep_mbool ' Support for older RTL-8129/8130 boards' CONFIG_8139TOO_8129 $CONFIG_8139TOO |
| dep_mbool ' Experiment for better RX reset (EXPERIMENTAL)' CONFIG_8139_NEW_RX_RESET $CONFIG_8139TOO $CONFIG_EXPERIMENTAL |
| dep_tristate ' SiS 900/7016 PCI Fast Ethernet Adapter support' CONFIG_SIS900 $CONFIG_PCI |
| dep_tristate ' SMC EtherPower II' CONFIG_EPIC100 $CONFIG_PCI |
| dep_tristate ' Sundance Alta support' CONFIG_SUNDANCE $CONFIG_PCI |
| if [ "$CONFIG_PCI" = "y" -o "$CONFIG_EISA" = "y" ]; then |
| tristate ' TI ThunderLAN support' CONFIG_TLAN |
| fi |
| dep_tristate ' VIA Rhine support' CONFIG_VIA_RHINE $CONFIG_PCI |
| dep_mbool ' Use MMIO instead of PIO (EXPERIMENTAL)' CONFIG_VIA_RHINE_MMIO $CONFIG_VIA_RHINE $CONFIG_EXPERIMENTAL |
| dep_tristate ' Winbond W89c840 Ethernet support' CONFIG_WINBOND_840 $CONFIG_PCI |
| if [ "$CONFIG_OBSOLETE" = "y" ]; then |
| dep_bool ' Zenith Z-Note support (EXPERIMENTAL)' CONFIG_ZNET $CONFIG_ISA |
| fi |
| if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_MIPS" = "y" ]; then |
| bool ' Philips SAA9730 Ethernet support (EXPERIMENTAL)' CONFIG_LAN_SAA9730 |
| fi |
| fi |
| bool ' Pocket and portable adapters' CONFIG_NET_POCKET |
| if [ "$CONFIG_NET_POCKET" = "y" ]; then |
| if [ "$CONFIG_ISA" = "y" -a "$CONFIG_X86" = "y" ]; then |
| tristate ' AT-LAN-TEC/RealTek pocket adapter support' CONFIG_ATP |
| fi |
| dep_tristate ' D-Link DE600 pocket adapter support' CONFIG_DE600 $CONFIG_ISA |
| dep_tristate ' D-Link DE620 pocket adapter support' CONFIG_DE620 $CONFIG_ISA |
| fi |
| if [ "$CONFIG_SGI_IP22" = "y" ]; then |
| bool ' SGI Seeq ethernet controller support' CONFIG_SGISEEQ |
| fi |
| if [ "$CONFIG_DECSTATION" = "y" ]; then |
| bool ' DEC LANCE ethernet controller support' CONFIG_DECLANCE |
| fi |
| if [ "$CONFIG_BAGET_MIPS" = "y" ]; then |
| tristate ' Baget AMD LANCE support' CONFIG_BAGETLANCE |
| fi |
| fi |
| |
| endmenu |
| |
| # |
| # Gigabit Ethernet |
| # |
| |
| mainmenu_option next_comment |
| comment 'Ethernet (1000 Mbit)' |
| |
| dep_tristate 'Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support' CONFIG_ACENIC $CONFIG_PCI |
| if [ "$CONFIG_ACENIC" != "n" ]; then |
| bool ' Omit support for old Tigon I based AceNICs' CONFIG_ACENIC_OMIT_TIGON_I |
| fi |
| dep_tristate 'D-Link DL2000-based Gigabit Ethernet support' CONFIG_DL2K $CONFIG_PCI |
| dep_tristate 'MyriCOM Gigabit Ethernet support' CONFIG_MYRI_SBUS $CONFIG_SBUS |
| dep_tristate 'National Semiconduct DP83820 support' CONFIG_NS83820 $CONFIG_PCI |
| dep_tristate 'Packet Engines Hamachi GNIC-II support' CONFIG_HAMACHI $CONFIG_PCI |
| dep_tristate 'Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)' CONFIG_YELLOWFIN $CONFIG_PCI $CONFIG_EXPERIMENTAL |
| dep_tristate 'SysKonnect SK-98xx support' CONFIG_SK98LIN $CONFIG_PCI |
| dep_tristate 'Broadcom Tigon3 support' CONFIG_TIGON3 $CONFIG_PCI $CONFIG_EXPERIMENTAL |
| |
| endmenu |
| |
| if [ "$CONFIG_PPC_ISERIES" = "y" ]; then |
| dep_tristate 'iSeries Virtual Ethernet driver support' CONFIG_VETH $CONFIG_PPC_ISERIES |
| fi |
| |
| bool 'FDDI driver support' CONFIG_FDDI |
| if [ "$CONFIG_FDDI" = "y" ]; then |
| if [ "$CONFIG_PCI" = "y" -o "$CONFIG_EISA" = "y" ]; then |
| tristate ' Digital DEFEA and DEFPA adapter support' CONFIG_DEFXX |
| fi |
| dep_tristate ' SysKonnect FDDI PCI support' CONFIG_SKFP $CONFIG_PCI |
| fi |
| |
| if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then |
| if [ "$CONFIG_INET" = "y" ]; then |
| bool 'HIPPI driver support (EXPERIMENTAL)' CONFIG_HIPPI |
| if [ "$CONFIG_HIPPI" = "y" -a "$CONFIG_PCI" = "y" ]; then |
| dep_tristate ' Essential RoadRunner HIPPI PCI adapter support' CONFIG_ROADRUNNER $CONFIG_PCI |
| if [ "$CONFIG_ROADRUNNER" != "n" ]; then |
| bool ' Use large TX/RX rings' CONFIG_ROADRUNNER_LARGE_RINGS |
| fi |
| fi |
| fi |
| fi |
| |
| dep_tristate 'PLIP (parallel port) support' CONFIG_PLIP $CONFIG_PARPORT |
| |
| tristate 'PPP (point-to-point protocol) support' CONFIG_PPP |
| if [ ! "$CONFIG_PPP" = "n" ]; then |
| dep_bool ' PPP multilink support (EXPERIMENTAL)' CONFIG_PPP_MULTILINK $CONFIG_EXPERIMENTAL |
| dep_bool ' PPP filtering' CONFIG_PPP_FILTER $CONFIG_FILTER |
| dep_tristate ' PPP support for async serial ports' CONFIG_PPP_ASYNC $CONFIG_PPP |
| dep_tristate ' PPP support for sync tty ports' CONFIG_PPP_SYNC_TTY $CONFIG_PPP |
| dep_tristate ' PPP Deflate compression' CONFIG_PPP_DEFLATE $CONFIG_PPP |
| dep_tristate ' PPP BSD-Compress compression' CONFIG_PPP_BSDCOMP $CONFIG_PPP |
| if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then |
| dep_tristate ' PPP over Ethernet (EXPERIMENTAL)' CONFIG_PPPOE $CONFIG_PPP |
| fi |
| if [ ! "$CONFIG_ATM" = "n" ]; then |
| dep_tristate ' PPP over ATM (EXPERIMENTAL)' CONFIG_PPPOATM $CONFIG_PPP |
| fi |
| fi |
| |
| tristate 'SLIP (serial line) support' CONFIG_SLIP |
| if [ "$CONFIG_SLIP" != "n" ]; then |
| bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED |
| bool ' Keepalive and linefill' CONFIG_SLIP_SMART |
| bool ' Six bit SLIP encapsulation' CONFIG_SLIP_MODE_SLIP6 |
| fi |
| |
| mainmenu_option next_comment |
| comment 'Wireless LAN (non-hamradio)' |
| |
| bool 'Wireless LAN (non-hamradio)' CONFIG_NET_RADIO |
| if [ "$CONFIG_NET_RADIO" = "y" ]; then |
| dep_tristate ' STRIP (Metricom starmode radio IP)' CONFIG_STRIP $CONFIG_INET |
| tristate ' Aironet Arlan 655 & IC2200 DS support' CONFIG_ARLAN |
| tristate ' Aironet 4500/4800 series adapters' CONFIG_AIRONET4500 |
| dep_tristate ' Aironet 4500/4800 ISA/PCI/PNP/365 support ' CONFIG_AIRONET4500_NONCS $CONFIG_AIRONET4500 |
| if [ "$CONFIG_AIRONET4500" != "n" -a "$CONFIG_AIRONET4500_NONCS" != "n" ]; then |
| bool ' Aironet 4500/4800 PNP support ' CONFIG_AIRONET4500_PNP |
| dep_bool ' Aironet 4500/4800 PCI support ' CONFIG_AIRONET4500_PCI $CONFIG_PCI |
| dep_bool ' Aironet 4500/4800 ISA broken support (EXPERIMENTAL)' CONFIG_AIRONET4500_ISA $CONFIG_EXPERIMENTAL |
| dep_bool ' Aironet 4500/4800 I365 broken support (EXPERIMENTAL)' CONFIG_AIRONET4500_I365 $CONFIG_EXPERIMENTAL |
| fi |
| dep_tristate ' Aironet 4500/4800 PROC interface ' CONFIG_AIRONET4500_PROC $CONFIG_AIRONET4500 m |
| |
| # New directory for Wireless LAN devices - cards above will move there |
| source drivers/net/wireless/Config.in |
| fi |
| |
| endmenu |
| |
| source drivers/net/tokenring/Config.in |
| |
| bool 'Fibre Channel driver support' CONFIG_NET_FC |
| if [ "$CONFIG_NET_FC" = "y" ]; then |
| dep_tristate ' Interphase 5526 Tachyon chipset based adapter support' CONFIG_IPHASE5526 $CONFIG_SCSI $CONFIG_PCI |
| fi |
| |
| if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then |
| dep_tristate 'Red Creek Hardware VPN (EXPERIMENTAL)' CONFIG_RCPCI $CONFIG_PCI |
| tristate 'Traffic Shaper (EXPERIMENTAL)' CONFIG_SHAPER |
| fi |
| |
| source drivers/net/wan/Config.in |
| |
| if [ "$CONFIG_HOTPLUG" = "y" -a "$CONFIG_PCMCIA" != "n" ]; then |
| source drivers/net/pcmcia/Config.in |
| fi |
