Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late DT updates from Arnd Bergmann:
"These updates have been kept in a separate branch mostly because they
rely on updates to the respective clk drivers to keep the shared
header files in sync.
This includes two branches for arm64 dt updates, both following up on
earlier changes for the same platforms that are already merged:
Samsung:
- add USB3 support in Exynos7
- minor PM related updates
Amlogic:
- new machines: WeTek Set-top-boxes
- various devices added to DT
There are also a couple of bugfixes that trickled in since the start
of the merge window:
- The moxart_defconfig was not building the intended platform
- CPU-hotplug was broken on ux500
- Coresight was broken on Juno (never worked)"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
ARM: deconfig: fix the moxart defconfig
ARM: ux500: resume the second core properly
arm64: dts: juno: update definition for programmable replicator
arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost
arm64: dts: exynos: Add USB 3.0 controller node for Exynos7
arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7
pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions
arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e
ARM64: dts: meson-gxbb-p200: add ADC laddered keys
ARM64: dts: meson: meson-gx: add the SAR ADC
ARM64: dts: meson-gxl: add the pwm_ao_b pin
ARM64: dts: meson-gx: add the missing pwm_AO_ab node
clk: gxbb: fix CLKID_ETH defined twice
ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
clk: gxbb: add the SAR ADC clocks and expose them
dt-bindings: amlogic: Add WeTek boards
ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
dt-bindings: vendor-prefix: Add wetek vendor prefix
ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency
ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes
...
diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index 9b2b41a..c246cd2 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -40,6 +40,8 @@
- "hardkernel,odroid-c2" (Meson gxbb)
- "amlogic,p200" (Meson gxbb)
- "amlogic,p201" (Meson gxbb)
+ - "wetek,hub" (Meson gxbb)
+ - "wetek,play2" (Meson gxbb)
- "amlogic,p212" (Meson gxl s905x)
- "amlogic,p230" (Meson gxl s905d)
- "amlogic,p231" (Meson gxl s905d)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index bd0ed3c..ec0bfb9 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -332,6 +332,7 @@
vivante Vivante Corporation
voipac Voipac Technologies s.r.o.
wd Western Digital Corp.
+wetek WeTek Electronics, limited.
wexler Wexler
winbond Winbond Electronics corp.
wlf Wolfson Microelectronics
diff --git a/arch/arm/configs/moxart_defconfig b/arch/arm/configs/moxart_defconfig
index a3cb76c..b2ddd53 100644
--- a/arch/arm/configs/moxart_defconfig
+++ b/arch/arm/configs/moxart_defconfig
@@ -18,9 +18,8 @@
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_ARCH_MULTI_V4T=y
+CONFIG_ARCH_MULTI_V4=y
# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_ARCH_MOXART=y
CONFIG_MACH_UC7112LX=y
CONFIG_PREEMPT=y
@@ -94,12 +93,10 @@
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MOXART=y
-CONFIG_POWER_SUPPLY=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_SUPPLY=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
@@ -107,10 +104,13 @@
CONFIG_MOXART_WDT=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
-CONFIG_MMC_SDHCI_MOXART=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_MOXART=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index c2499bf..a9a3453 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -5,7 +5,4 @@
obj-y := pm.o
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o
obj-$(CONFIG_SMP) += platsmp.o
-obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
-
-CFLAGS_hotplug.o += -march=armv7-a
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 24529cf..28083ef 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -31,8 +31,6 @@
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
-#include "setup.h"
-
#include "db8500-regs.h"
static int __init ux500_l2x0_unlock(void)
diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c
deleted file mode 100644
index 1cbed03..0000000
--- a/arch/arm/mach-ux500/hotplug.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- * Based on ARM realview platform
- *
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- *
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-
-#include <asm/smp_plat.h>
-
-#include "setup.h"
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void ux500_cpu_die(unsigned int cpu)
-{
- /* directly enter low power state, skipping secure registers */
- for (;;) {
- __asm__ __volatile__("dsb\n\t" "wfi\n\t"
- : : : "memory");
- if (pen_release == cpu_logical_map(cpu)) {
- /*
- * OK, proper wakeup, we're done
- */
- break;
- }
- }
-}
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 9b124c2..69c2361 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -23,8 +23,6 @@
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
-#include "setup.h"
-
#include "db8500-regs.h"
/* Magic triggers in backup RAM */
@@ -90,6 +88,13 @@
return 0;
}
+#ifdef CONFIG_HOTPLUG_CPU
+void ux500_cpu_die(unsigned int cpu)
+{
+ wfi();
+}
+#endif
+
static const struct smp_operations ux500_smp_ops __initconst = {
.smp_prepare_cpus = ux500_smp_prepare_cpus,
.smp_boot_secondary = ux500_boot_secondary,
diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h
deleted file mode 100644
index 988e7c7..0000000
--- a/arch/arm/mach-ux500/setup.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * These symbols are needed for board-specific files to call their
- * own cpu-specific files
- */
-#ifndef __ASM_ARCH_SETUP_H
-#define __ASM_ARCH_SETUP_H
-
-extern void ux500_cpu_die(unsigned int cpu);
-
-#endif /* __ASM_ARCH_SETUP_H */
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 0d7bfbf..3f94bce 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -5,12 +5,14 @@
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxl-nexbox-a95x.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q200.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q201.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
always := $(dtb-y)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 0cbe24b..5d995f7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -83,6 +83,7 @@
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&l2>;
+ clocks = <&scpi_dvfs 0>;
};
cpu1: cpu@1 {
@@ -91,6 +92,7 @@
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&l2>;
+ clocks = <&scpi_dvfs 0>;
};
cpu2: cpu@2 {
@@ -99,6 +101,7 @@
reg = <0x0 0x2>;
enable-method = "psci";
next-level-cache = <&l2>;
+ clocks = <&scpi_dvfs 0>;
};
cpu3: cpu@3 {
@@ -107,6 +110,7 @@
reg = <0x0 0x3>;
enable-method = "psci";
next-level-cache = <&l2>;
+ clocks = <&scpi_dvfs 0>;
};
l2: l2-cache0 {
@@ -171,6 +175,28 @@
};
};
+ scpi {
+ compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
+ mboxes = <&mailbox 1 &mailbox 2>;
+ shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
+
+ scpi_clocks: clocks {
+ compatible = "arm,scpi-clocks";
+
+ scpi_dvfs: scpi_clocks@0 {
+ compatible = "arm,scpi-dvfs-clocks";
+ #clock-cells = <1>;
+ clock-indices = <0>;
+ clock-output-names = "vcpu";
+ };
+ };
+
+ scpi_sensors: sensors {
+ compatible = "arm,scpi-sensors";
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
@@ -229,6 +255,14 @@
status = "disabled";
};
+ saradc: adc@8680 {
+ compatible = "amlogic,meson-saradc";
+ reg = <0x0 0x8680 0x0 0x34>;
+ #io-channel-cells = <1>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+
pwm_ef: pwm@86c0 {
compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
reg = <0x0 0x086c0 0x0 0x10>;
@@ -282,6 +316,25 @@
#address-cells = <0>;
};
+ sram: sram@c8000000 {
+ compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
+ reg = <0x0 0xc8000000 0x0 0x14000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0xc8000000 0x14000>;
+
+ cpu_scp_lpri: scp-shmem@0 {
+ compatible = "amlogic,meson-gxbb-scp-shmem";
+ reg = <0x13000 0x400>;
+ };
+
+ cpu_scp_hpri: scp-shmem@200 {
+ compatible = "amlogic,meson-gxbb-scp-shmem";
+ reg = <0x13400 0x400>;
+ };
+ };
+
aobus: aobus@c8100000 {
compatible = "simple-bus";
reg = <0x0 0xc8100000 0x0 0x100000>;
@@ -297,6 +350,21 @@
status = "disabled";
};
+ uart_AO_B: serial@4e0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0x0 0x004e0 0x0 0x14>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>;
+ status = "disabled";
+ };
+
+ pwm_AO_ab: pwm@550 {
+ compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+ reg = <0x0 0x00550 0x0 0x10>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
ir: ir@580 {
compatible = "amlogic,meson-gxbb-ir";
reg = <0x0 0x00580 0x0 0x40>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
index 03e3d76..fc0e86c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
@@ -45,10 +45,55 @@
/dts-v1/;
#include "meson-gxbb-p20x.dtsi"
+#include <dt-bindings/input/input.h>
/ {
compatible = "amlogic,p200", "amlogic,meson-gxbb";
model = "Amlogic Meson GXBB P200 Development Board";
+
+ avdd18_usb_adc: regulator-avdd18_usb_adc {
+ compatible = "regulator-fixed";
+ regulator-name = "AVDD18_USB_ADC";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ adc_keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+
+ button-home {
+ label = "Home";
+ linux,code = <KEY_HOME>;
+ press-threshold-microvolt = <900000>; /* 50% */
+ };
+
+ button-esc {
+ label = "Esc";
+ linux,code = <KEY_ESC>;
+ press-threshold-microvolt = <684000>; /* 38% */
+ };
+
+ button-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ press-threshold-microvolt = <468000>; /* 26% */
+ };
+
+ button-down {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ press-threshold-microvolt = <252000>; /* 14% */
+ };
+
+ button-menu {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ press-threshold-microvolt = <0>; /* 0% */
+ };
+ };
};
&i2c_B {
@@ -56,3 +101,8 @@
pinctrl-0 = <&i2c_b_pins>;
pinctrl-names = "default";
};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&avdd18_usb_adc>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index e59ad30..86709929 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -53,6 +53,17 @@
stdout-path = "serial0:115200n8";
};
+ leds {
+ compatible = "gpio-leds";
+
+ blue {
+ label = "vega-s95:blue:on";
+ gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ panic-indicator;
+ };
+ };
+
usb_vbus: regulator-usb0-vbus {
compatible = "regulator-fixed";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
new file mode 100644
index 0000000..56f8559
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
@@ -0,0 +1,66 @@
+/*
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+
+/ {
+ compatible = "wetek,hub", "amlogic,meson-gxbb";
+ model = "WeTek Hub";
+
+ leds {
+ compatible = "gpio-leds";
+
+ system {
+ label = "wetek-play:system-status";
+ gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ panic-indicator;
+ };
+ };
+
+ cvbs-connector {
+ status = "disabled";
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
new file mode 100644
index 0000000..ea79fdd
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
@@ -0,0 +1,94 @@
+/*
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "wetek,play2", "amlogic,meson-gxbb";
+ model = "WeTek Play 2";
+
+ leds {
+ compatible = "gpio-leds";
+
+ system {
+ label = "wetek-play:system-status";
+ gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ panic-indicator;
+ };
+
+ wifi {
+ label = "wetek-play:wifi-status";
+ gpios = <&gpio GPIODV_26 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ ethernet {
+ label = "wetek-play:ethernet-status";
+ gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ button@0 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&i2c_A {
+ status = "okay";
+ pinctrl-0 = <&i2c_a_pins>;
+ pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index b353073..04b3324 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -50,28 +50,6 @@
/ {
compatible = "amlogic,meson-gxbb";
- scpi {
- compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
- mboxes = <&mailbox 1 &mailbox 2>;
- shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
-
- scpi_clocks: clocks {
- compatible = "arm,scpi-clocks";
-
- scpi_dvfs: scpi_clocks@0 {
- compatible = "arm,scpi-dvfs-clocks";
- #clock-cells = <1>;
- clock-indices = <0>;
- clock-output-names = "vcpu";
- };
- };
-
- scpi_sensors: sensors {
- compatible = "arm,scpi-sensors";
- #thermal-sensor-cells = <1>;
- };
- };
-
soc {
usb0_phy: phy@c0000000 {
compatible = "amlogic,meson-gxbb-usb2-phy";
@@ -93,25 +71,6 @@
status = "disabled";
};
- sram: sram@c8000000 {
- compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
- reg = <0x0 0xc8000000 0x0 0x14000>;
-
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x0 0xc8000000 0x14000>;
-
- cpu_scp_lpri: scp-shmem@0 {
- compatible = "amlogic,meson-gxbb-scp-shmem";
- reg = <0x13000 0x400>;
- };
-
- cpu_scp_hpri: scp-shmem@200 {
- compatible = "amlogic,meson-gxbb-scp-shmem";
- reg = <0x13400 0x400>;
- };
- };
-
usb0: usb@c9000000 {
compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
reg = <0x0 0xc9000000 0x0 0x40000>;
@@ -138,22 +97,6 @@
};
};
-&cpu0 {
- clocks = <&scpi_dvfs 0>;
-};
-
-&cpu1 {
- clocks = <&scpi_dvfs 0>;
-};
-
-&cpu2 {
- clocks = <&scpi_dvfs 0>;
-};
-
-&cpu3 {
- clocks = <&scpi_dvfs 0>;
-};
-
&cbus {
spifc: spi@8c80 {
compatible = "amlogic,meson-gxbb-spifc";
@@ -195,6 +138,29 @@
};
};
+ uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
+ mux {
+ groups = "uart_cts_ao_a",
+ "uart_rts_ao_a";
+ function = "uart_ao";
+ };
+ };
+
+ uart_ao_b_pins: uart_ao_b {
+ mux {
+ groups = "uart_tx_ao_b", "uart_rx_ao_b";
+ function = "uart_ao_b";
+ };
+ };
+
+ uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
+ mux {
+ groups = "uart_cts_ao_b",
+ "uart_rts_ao_b";
+ function = "uart_ao_b";
+ };
+ };
+
remote_input_ao_pins: remote_input_ao {
mux {
groups = "remote_input_ao";
@@ -340,6 +306,14 @@
};
};
+ uart_a_cts_rts_pins: uart_a_cts_rts {
+ mux {
+ groups = "uart_cts_a",
+ "uart_rts_a";
+ function = "uart_a";
+ };
+ };
+
uart_b_pins: uart_b {
mux {
groups = "uart_tx_b",
@@ -348,6 +322,14 @@
};
};
+ uart_b_cts_rts_pins: uart_b_cts_rts {
+ mux {
+ groups = "uart_cts_b",
+ "uart_rts_b";
+ function = "uart_b";
+ };
+ };
+
uart_c_pins: uart_c {
mux {
groups = "uart_tx_c",
@@ -356,6 +338,14 @@
};
};
+ uart_c_cts_rts_pins: uart_c_cts_rts {
+ mux {
+ groups = "uart_cts_c",
+ "uart_rts_c";
+ function = "uart_c";
+ };
+ };
+
i2c_a_pins: i2c_a {
mux {
groups = "i2c_sck_a",
@@ -463,6 +453,20 @@
function = "pwm_f_y";
};
};
+
+ hdmi_hpd_pins: hdmi_hpd {
+ mux {
+ groups = "hdmi_hpd";
+ function = "hdmi_hpd";
+ };
+ };
+
+ hdmi_i2c_pins: hdmi_i2c {
+ mux {
+ groups = "hdmi_sda", "hdmi_scl";
+ function = "hdmi_i2c";
+ };
+ };
};
};
@@ -486,6 +490,16 @@
clocks = <&clkc CLKID_I2C>;
};
+&saradc {
+ compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
+ clocks = <&xtal>,
+ <&clkc CLKID_SAR_ADC>,
+ <&clkc CLKID_SANA>,
+ <&clkc CLKID_SAR_ADC_CLK>,
+ <&clkc CLKID_SAR_ADC_SEL>;
+ clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
+};
+
&sd_emmc_a {
clocks = <&clkc CLKID_SD_EMMC_A>,
<&xtal>,
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
similarity index 100%
rename from arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
rename to arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 69216246..fe11b5f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -88,12 +88,42 @@
};
};
+ uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
+ mux {
+ groups = "uart_cts_ao_a",
+ "uart_rts_ao_a";
+ function = "uart_ao";
+ };
+ };
+
+ uart_ao_b_pins: uart_ao_b {
+ mux {
+ groups = "uart_tx_ao_b", "uart_rx_ao_b";
+ function = "uart_ao_b";
+ };
+ };
+
+ uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
+ mux {
+ groups = "uart_cts_ao_b",
+ "uart_rts_ao_b";
+ function = "uart_ao_b";
+ };
+ };
+
remote_input_ao_pins: remote_input_ao {
mux {
groups = "remote_input_ao";
function = "remote_input_ao";
};
};
+
+ pwm_ao_b_pins: pwm_ao_b {
+ mux {
+ groups = "pwm_ao_b";
+ function = "pwm_ao_b";
+ };
+ };
};
};
@@ -163,6 +193,14 @@
};
};
+ uart_a_cts_rts_pins: uart_a_cts_rts {
+ mux {
+ groups = "uart_cts_a",
+ "uart_rts_a";
+ function = "uart_a";
+ };
+ };
+
uart_b_pins: uart_b {
mux {
groups = "uart_tx_b",
@@ -171,6 +209,14 @@
};
};
+ uart_b_cts_rts_pins: uart_b_cts_rts {
+ mux {
+ groups = "uart_cts_b",
+ "uart_rts_b";
+ function = "uart_b";
+ };
+ };
+
uart_c_pins: uart_c {
mux {
groups = "uart_tx_c",
@@ -179,6 +225,14 @@
};
};
+ uart_c_cts_rts_pins: uart_c_cts_rts {
+ mux {
+ groups = "uart_cts_c",
+ "uart_rts_c";
+ function = "uart_c";
+ };
+ };
+
i2c_a_pins: i2c_a {
mux {
groups = "i2c_sck_a",
@@ -229,6 +283,20 @@
function = "pwm_e";
};
};
+
+ hdmi_hpd_pins: hdmi_hpd {
+ mux {
+ groups = "hdmi_hpd";
+ function = "hdmi_hpd";
+ };
+ };
+
+ hdmi_i2c_pins: hdmi_i2c {
+ mux {
+ groups = "hdmi_sda", "hdmi_scl";
+ function = "hdmi_i2c";
+ };
+ };
};
eth-phy-mux {
@@ -279,6 +347,16 @@
clocks = <&clkc CLKID_I2C>;
};
+&saradc {
+ compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
+ clocks = <&xtal>,
+ <&clkc CLKID_SAR_ADC>,
+ <&clkc CLKID_SANA>,
+ <&clkc CLKID_SAR_ADC_CLK>,
+ <&clkc CLKID_SAR_ADC_SEL>;
+ clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
+};
+
&sd_emmc_a {
clocks = <&clkc CLKID_SD_EMMC_A>,
<&xtal>,
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
similarity index 100%
rename from arch/arm64/boot/dts/amlogic/meson-gxm-s912-q200.dts
rename to arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-q201.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
similarity index 100%
rename from arch/arm64/boot/dts/amlogic/meson-gxm-s912-q201.dts
rename to arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
index eb2f0c3..ddea730 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -85,6 +85,7 @@
reg = <0x0 0x100>;
enable-method = "psci";
next-level-cache = <&l2>;
+ clocks = <&scpi_dvfs 1>;
};
cpu5: cpu@101 {
@@ -93,6 +94,7 @@
reg = <0x0 0x101>;
enable-method = "psci";
next-level-cache = <&l2>;
+ clocks = <&scpi_dvfs 1>;
};
cpu6: cpu@102 {
@@ -101,6 +103,7 @@
reg = <0x0 0x102>;
enable-method = "psci";
next-level-cache = <&l2>;
+ clocks = <&scpi_dvfs 1>;
};
cpu7: cpu@103 {
@@ -109,10 +112,21 @@
reg = <0x0 0x103>;
enable-method = "psci";
next-level-cache = <&l2>;
+ clocks = <&scpi_dvfs 1>;
};
};
};
+&saradc {
+ compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc";
+};
+
+&scpi_dvfs {
+ clock-indices = <0 1>;
+ clock-output-names = "vbig", "vlittle";
+};
+
&vpu {
compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
};
+
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index 9d799d9..df539e8 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -372,12 +372,13 @@
};
};
- coresight-replicator {
- /*
- * Non-configurable replicators don't show up on the
- * AMBA bus. As such no need to add "arm,primecell".
- */
- compatible = "arm,coresight-replicator";
+ replicator@20120000 {
+ compatible = "qcom,coresight-replicator1x", "arm,primecell";
+ reg = <0 0x20120000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
ports {
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 53fd068..098ad55 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -217,18 +217,6 @@
assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
};
-&cmu_disp {
- assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
- <&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
- <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
- <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>;
- assigned-clock-parents = <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
- <0>,
- <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
- <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>;
- assigned-clock-rates = <0>, <400000000>;
-};
-
&cmu_fsys {
assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
<&cmu_top CLK_MOUT_SCLK_USBHOST30>,
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index ddba2f8..dea0a6f 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -18,6 +18,40 @@
compatible = "samsung,tm2", "samsung,exynos5433";
};
+&cmu_disp {
+ /*
+ * TM2 and TM2e differ only by DISP_PLL rate, but define all assigned
+ * clocks properties for DISP CMU for each board to keep them together
+ * for easier review and maintenance.
+ */
+ assigned-clocks = <&cmu_disp CLK_FOUT_DISP_PLL>,
+ <&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
+ <&cmu_disp CLK_MOUT_ACLK_DISP_333_USER>,
+ <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
+ <&cmu_disp CLK_MOUT_SCLK_DSIM0>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK>,
+ <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER>,
+ <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER>,
+ <&cmu_disp CLK_MOUT_DISP_PLL>,
+ <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>;
+ assigned-clock-parents = <0>, <0>,
+ <&cmu_mif CLK_ACLK_DISP_333>,
+ <&cmu_mif CLK_SCLK_DSIM0_DISP>,
+ <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
+ <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
+ <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY>,
+ <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY>,
+ <&cmu_disp CLK_FOUT_DISP_PLL>,
+ <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
+ <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>;
+ assigned-clock-rates = <250000000>, <400000000>;
+};
+
&hsi2c_9 {
status = "okay";
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
index 2fbf3a8..7891a31 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
@@ -18,6 +18,40 @@
compatible = "samsung,tm2e", "samsung,exynos5433";
};
+&cmu_disp {
+ /*
+ * TM2 and TM2e differ only by DISP_PLL rate, but define all assigned
+ * clocks properties for DISP CMU for each board to keep them together
+ * for easier review and maintenance.
+ */
+ assigned-clocks = <&cmu_disp CLK_FOUT_DISP_PLL>,
+ <&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
+ <&cmu_disp CLK_MOUT_ACLK_DISP_333_USER>,
+ <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
+ <&cmu_disp CLK_MOUT_SCLK_DSIM0>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK>,
+ <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER>,
+ <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER>,
+ <&cmu_disp CLK_MOUT_DISP_PLL>,
+ <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>;
+ assigned-clock-parents = <0>, <0>,
+ <&cmu_mif CLK_ACLK_DISP_333>,
+ <&cmu_mif CLK_SCLK_DSIM0_DISP>,
+ <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
+ <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
+ <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY>,
+ <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY>,
+ <&cmu_disp CLK_FOUT_DISP_PLL>,
+ <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
+ <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>;
+ assigned-clock-rates = <278000000>, <400000000>;
+};
+
&ldo31_reg {
regulator-name = "TSP_VDD_1.8V_AP";
regulator-min-microvolt = <1800000>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index c528dd5..e5892bb 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -13,6 +13,7 @@
#include "exynos7.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Samsung Exynos7 Espresso board based on EXYNOS7";
@@ -32,6 +33,29 @@
device_type = "memory";
reg = <0x0 0x40000000 0x0 0xC0000000>;
};
+
+ usb30_vbus_reg: regulator-usb30 {
+ compatible = "regulator-fixed";
+ regulator-name = "VBUS_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gph1 1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb30_vbus_en>;
+ enable-active-high;
+ };
+
+ usb3drd_boost_5v: regulator-usb3drd-boost {
+ compatible = "regulator-fixed";
+ regulator-name = "VUSB_VBUS_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpf4 1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3drd_boost_en>;
+ enable-active-high;
+ };
+
};
&fin_pll {
@@ -328,8 +352,8 @@
&pinctrl_alive {
pmic_irq: pmic-irq {
samsung,pins = "gpa0-2";
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
};
@@ -365,3 +389,24 @@
vqmmc-supply = <&ldo2_reg>;
disable-wp;
};
+
+&pinctrl_bus1 {
+ usb30_vbus_en: usb30-vbus-en {
+ samsung,pins = "gph1-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
+ usb3drd_boost_en: usb3drd-boost-en {
+ samsung,pins = "gpf4-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+};
+
+&usbdrd_phy {
+ vbus-supply = <&usb30_vbus_reg>;
+ vbus-boost-supply = <&usb3drd_boost_5v>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
index 7ebb939..8f58850 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
@@ -12,6 +12,8 @@
* published by the Free Software Foundation.
*/
+#include <dt-bindings/pinctrl/samsung.h>
+
&pinctrl_alive {
gpa0: gpa0 {
gpio-controller;
@@ -187,163 +189,163 @@
hs_i2c10_bus: hs-i2c10-bus {
samsung,pins = "gpb0-1", "gpb0-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c11_bus: hs-i2c11-bus {
samsung,pins = "gpb0-3", "gpb0-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c2_bus: hs-i2c2-bus {
samsung,pins = "gpd0-3", "gpd0-2";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart0_data: uart0-data {
samsung,pins = "gpd0-0", "gpd0-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart0_fctl: uart0-fctl {
samsung,pins = "gpd0-2", "gpd0-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart2_data: uart2-data {
samsung,pins = "gpd1-4", "gpd1-5";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c3_bus: hs-i2c3-bus {
samsung,pins = "gpd1-3", "gpd1-2";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_data: uart1-data {
samsung,pins = "gpd1-0", "gpd1-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_fctl: uart1-fctl {
samsung,pins = "gpd1-2", "gpd1-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c0_bus: hs-i2c0-bus {
samsung,pins = "gpd2-1", "gpd2-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c1_bus: hs-i2c1-bus {
samsung,pins = "gpd2-3", "gpd2-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c9_bus: hs-i2c9-bus {
samsung,pins = "gpd2-7", "gpd2-6";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm0_out: pwm0-out {
samsung,pins = "gpd2-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm1_out: pwm1-out {
samsung,pins = "gpd2-5";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm2_out: pwm2-out {
samsung,pins = "gpd2-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm3_out: pwm3-out {
samsung,pins = "gpd2-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c8_bus: hs-i2c8-bus {
samsung,pins = "gpd5-3", "gpd5-2";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart3_data: uart3-data {
samsung,pins = "gpd5-0", "gpd5-1";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi2_bus: spi2-bus {
samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi1_bus: spi1-bus {
samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi0_bus: spi0-bus {
samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c4_bus: hs-i2c4-bus {
samsung,pins = "gpg3-1", "gpg3-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c5_bus: hs-i2c5-bus {
samsung,pins = "gpg3-3", "gpg3-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
};
@@ -358,9 +360,9 @@
hs_i2c6_bus: hs-i2c6-bus {
samsung,pins = "gpj0-1", "gpj0-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
};
@@ -375,9 +377,9 @@
hs_i2c7_bus: hs-i2c7-bus {
samsung,pins = "gpj1-1", "gpj1-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
};
@@ -392,9 +394,9 @@
spi3_bus: spi3-bus {
samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
};
@@ -409,9 +411,9 @@
spi4_bus: spi4-bus {
samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
};
@@ -426,37 +428,37 @@
sd2_clk: sd2-clk {
samsung,pins = "gpr4-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_cmd: sd2-cmd {
samsung,pins = "gpr4-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_cd: sd2-cd {
samsung,pins = "gpr4-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_bus1: sd2-bus-width1 {
samsung,pins = "gpr4-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_bus4: sd2-bus-width4 {
samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
};
@@ -495,107 +497,107 @@
sd0_clk: sd0-clk {
samsung,pins = "gpr0-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
sd0_cmd: sd0-cmd {
samsung,pins = "gpr0-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
sd0_ds: sd0-ds {
samsung,pins = "gpr0-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
sd0_qrdy: sd0-qrdy {
samsung,pins = "gpr0-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
sd0_bus1: sd0-bus-width1 {
samsung,pins = "gpr1-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
sd0_bus4: sd0-bus-width4 {
samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
sd0_bus8: sd0-bus-width8 {
samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
sd1_clk: sd1-clk {
samsung,pins = "gpr2-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
};
sd1_cmd: sd1-cmd {
samsung,pins = "gpr2-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
};
sd1_ds: sd1-ds {
samsung,pins = "gpr2-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <6>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
};
sd1_qrdy: sd1-qrdy {
samsung,pins = "gpr2-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <6>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
};
sd1_int: sd1-int {
samsung,pins = "gpr2-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <6>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
};
sd1_bus1: sd1-bus-width1 {
samsung,pins = "gpr3-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
};
sd1_bus4: sd1-bus-width4 {
samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
};
sd1_bus8: sd1-bus-width8 {
samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
};
};
@@ -682,22 +684,22 @@
spi5_bus: spi5-bus {
samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
ufs_refclk_out: ufs-refclk-out {
samsung,pins = "gpg2-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
};
ufs_rst_n: ufs-rst-n {
samsung,pins = "gph1-5";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
};
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 80aa60e..9a3fbed 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -603,6 +603,40 @@
#include "exynos7-trip-points.dtsi"
};
};
+
+ usbdrd_phy: phy@15500000 {
+ compatible = "samsung,exynos7-usbdrd-phy";
+ reg = <0x15500000 0x100>;
+ clocks = <&clock_fsys0 ACLK_USBDRD300>,
+ <&clock_fsys0 OSCCLK_PHY_CLKOUT_USB30_PHY>,
+ <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PIPE_PCLK_USER>,
+ <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PHYCLK_USER>,
+ <&clock_fsys0 SCLK_USBDRD300_REFCLK>;
+ clock-names = "phy", "ref", "phy_pipe",
+ "phy_utmi", "itp";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ #phy-cells = <1>;
+ };
+
+ usbdrd3 {
+ compatible = "samsung,exynos7-dwusb3";
+ clocks = <&clock_fsys0 ACLK_USBDRD300>,
+ <&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>,
+ <&clock_fsys0 ACLK_AXIUS_USBDRD30X_FSYS0X>;
+ clock-names = "usbdrd30", "usbdrd30_susp_clk",
+ "usbdrd30_axius_clk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dwc3@15400000 {
+ compatible = "snps,dwc3";
+ reg = <0x15400000 0x10000>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
};
};
diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index 9d9af44..1c1ec13 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -564,6 +564,46 @@
},
};
+static struct clk_mux gxbb_sar_adc_clk_sel = {
+ .reg = (void *)HHI_SAR_CLK_CNTL,
+ .mask = 0x3,
+ .shift = 9,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "sar_adc_clk_sel",
+ .ops = &clk_mux_ops,
+ /* NOTE: The datasheet doesn't list the parents for bit 10 */
+ .parent_names = (const char *[]){ "xtal", "clk81", },
+ .num_parents = 2,
+ },
+};
+
+static struct clk_divider gxbb_sar_adc_clk_div = {
+ .reg = (void *)HHI_SAR_CLK_CNTL,
+ .shift = 0,
+ .width = 8,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "sar_adc_clk_div",
+ .ops = &clk_divider_ops,
+ .parent_names = (const char *[]){ "sar_adc_clk_sel" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_gate gxbb_sar_adc_clk = {
+ .reg = (void *)HHI_SAR_CLK_CNTL,
+ .bit_idx = 8,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "sar_adc_clk",
+ .ops = &clk_gate_ops,
+ .parent_names = (const char *[]){ "sar_adc_clk_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
/* Everything Else (EE) domain gates */
static MESON_GATE(gxbb_ddr, HHI_GCLK_MPEG0, 0);
static MESON_GATE(gxbb_dos, HHI_GCLK_MPEG0, 1);
@@ -754,6 +794,9 @@
[CLKID_SD_EMMC_A] = &gxbb_emmc_a.hw,
[CLKID_SD_EMMC_B] = &gxbb_emmc_b.hw,
[CLKID_SD_EMMC_C] = &gxbb_emmc_c.hw,
+ [CLKID_SAR_ADC_CLK] = &gxbb_sar_adc_clk.hw,
+ [CLKID_SAR_ADC_SEL] = &gxbb_sar_adc_clk_sel.hw,
+ [CLKID_SAR_ADC_DIV] = &gxbb_sar_adc_clk_div.hw,
},
.num = NR_CLKS,
};
@@ -856,6 +899,7 @@
&gxbb_emmc_a,
&gxbb_emmc_b,
&gxbb_emmc_c,
+ &gxbb_sar_adc_clk,
};
static int gxbb_clkc_probe(struct platform_device *pdev)
@@ -888,6 +932,10 @@
gxbb_mpeg_clk_sel.reg = clk_base + (u64)gxbb_mpeg_clk_sel.reg;
gxbb_mpeg_clk_div.reg = clk_base + (u64)gxbb_mpeg_clk_div.reg;
+ /* Populate the base address for the SAR ADC clks */
+ gxbb_sar_adc_clk_sel.reg = clk_base + (u64)gxbb_sar_adc_clk_sel.reg;
+ gxbb_sar_adc_clk_div.reg = clk_base + (u64)gxbb_sar_adc_clk_div.reg;
+
/* Populate base address for gates */
for (i = 0; i < ARRAY_SIZE(gxbb_clk_gates); i++)
gxbb_clk_gates[i]->reg = clk_base +
diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h
index 0252939..8ee2022 100644
--- a/drivers/clk/meson/gxbb.h
+++ b/drivers/clk/meson/gxbb.h
@@ -191,7 +191,7 @@
#define CLKID_PERIPHS 20
#define CLKID_SPICC 21
/* CLKID_I2C */
-#define CLKID_SAR_ADC 23
+/* #define CLKID_SAR_ADC */
#define CLKID_SMART_CARD 24
#define CLKID_RNG0 25
#define CLKID_UART0 26
@@ -204,7 +204,7 @@
#define CLKID_ASSIST_MISC 33
/* CLKID_SPI */
#define CLKID_I2S_SPDIF 35
-#define CLKID_ETH 36
+/* CLKID_ETH */
#define CLKID_DEMUX 37
#define CLKID_AIU_GLUE 38
#define CLKID_IEC958 39
@@ -231,13 +231,13 @@
#define CLKID_AHB_DATA_BUS 60
#define CLKID_AHB_CTRL_BUS 61
#define CLKID_HDMI_INTR_SYNC 62
-#define CLKID_HDMI_PCLK 63
+/* CLKID_HDMI_PCLK */
/* CLKID_USB1_DDR_BRIDGE */
/* CLKID_USB0_DDR_BRIDGE */
#define CLKID_MMC_PCLK 66
#define CLKID_DVIN 67
#define CLKID_UART2 68
-#define CLKID_SANA 69
+/* #define CLKID_SANA */
#define CLKID_VPU_INTR 70
#define CLKID_SEC_AHB_AHB3_BRIDGE 71
#define CLKID_CLK81_A53 72
@@ -245,7 +245,7 @@
#define CLKID_VCLK2_VENCI1 74
#define CLKID_VCLK2_VENCP0 75
#define CLKID_VCLK2_VENCP1 76
-#define CLKID_GCLK_VENCI_INT0 77
+/* CLKID_GCLK_VENCI_INT0 */
#define CLKID_GCLK_VENCI_INT 78
#define CLKID_DAC_CLK 79
#define CLKID_AOCLK_GATE 80
@@ -265,8 +265,11 @@
/* CLKID_SD_EMMC_A */
/* CLKID_SD_EMMC_B */
/* CLKID_SD_EMMC_C */
+/* CLKID_SAR_ADC_CLK */
+/* CLKID_SAR_ADC_SEL */
+#define CLKID_SAR_ADC_DIV 99
-#define NR_CLKS 97
+#define NR_CLKS 100
/* include the CLKIDs that have been made part of the stable DT binding */
#include <dt-bindings/clock/gxbb-clkc.h>
diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h
index baade6f..692846c 100644
--- a/include/dt-bindings/clock/gxbb-clkc.h
+++ b/include/dt-bindings/clock/gxbb-clkc.h
@@ -14,15 +14,21 @@
#define CLKID_MPLL2 15
#define CLKID_SPI 34
#define CLKID_I2C 22
+#define CLKID_SAR_ADC 23
#define CLKID_ETH 36
#define CLKID_USB0 50
#define CLKID_USB1 51
#define CLKID_USB 55
+#define CLKID_HDMI_PCLK 63
#define CLKID_USB1_DDR_BRIDGE 64
#define CLKID_USB0_DDR_BRIDGE 65
+#define CLKID_SANA 69
+#define CLKID_GCLK_VENCI_INT0 77
#define CLKID_AO_I2C 93
#define CLKID_SD_EMMC_A 94
#define CLKID_SD_EMMC_B 95
#define CLKID_SD_EMMC_C 96
+#define CLKID_SAR_ADC_CLK 97
+#define CLKID_SAR_ADC_SEL 98
#endif /* __GXBB_CLKC_H */
diff --git a/include/dt-bindings/pinctrl/samsung.h b/include/dt-bindings/pinctrl/samsung.h
index e0ebb20..b7aa364 100644
--- a/include/dt-bindings/pinctrl/samsung.h
+++ b/include/dt-bindings/pinctrl/samsung.h
@@ -68,4 +68,12 @@
#define EXYNOS_PIN_FUNC_6 6
#define EXYNOS_PIN_FUNC_F 0xf
+/* Drive strengths for Exynos7 FSYS1 block */
+#define EXYNOS7_FSYS1_PIN_DRV_LV1 0
+#define EXYNOS7_FSYS1_PIN_DRV_LV2 4
+#define EXYNOS7_FSYS1_PIN_DRV_LV3 2
+#define EXYNOS7_FSYS1_PIN_DRV_LV4 6
+#define EXYNOS7_FSYS1_PIN_DRV_LV5 1
+#define EXYNOS7_FSYS1_PIN_DRV_LV6 5
+
#endif /* __DT_BINDINGS_PINCTRL_SAMSUNG_H__ */
