Merge branch 'imx/imx6q' into next/soc
Conflicts:
Documentation/devicetree/bindings/arm/fsl.txt
arch/arm/Kconfig
arch/arm/Kconfig.debug
arch/arm/plat-mxc/include/mach/common.h
diff --git a/Documentation/devicetree/bindings/arm/calxeda.txt b/Documentation/devicetree/bindings/arm/calxeda.txt
new file mode 100644
index 0000000..4755caa
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/calxeda.txt
@@ -0,0 +1,8 @@
+Calxeda Highbank Platforms Device Tree Bindings
+-----------------------------------------------
+
+Boards with Calxeda Cortex-A9 based Highbank SOC shall have the following
+properties.
+
+Required root node properties:
+ - compatible = "calxeda,highbank";
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index 345bfc0..c9848ad 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -1,6 +1,26 @@
Freescale i.MX Platforms Device Tree Bindings
-----------------------------------------------
+i.MX51 Babbage Board
+Required root node properties:
+ - compatible = "fsl,imx51-babbage", "fsl,imx51";
+
+i.MX53 Automotive Reference Design Board
+Required root node properties:
+ - compatible = "fsl,imx53-ard", "fsl,imx53";
+
+i.MX53 Evaluation Kit
+Required root node properties:
+ - compatible = "fsl,imx53-evk", "fsl,imx53";
+
+i.MX53 Quick Start Board
+Required root node properties:
+ - compatible = "fsl,imx53-qsb", "fsl,imx53";
+
+i.MX53 Smart Mobile Reference Design Board
+Required root node properties:
+ - compatible = "fsl,imx53-smd", "fsl,imx53";
+
i.MX6 Quad SABRE Automotive Board
Required root node properties:
- compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt
new file mode 100644
index 0000000..7ca5216
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/l2cc.txt
@@ -0,0 +1,44 @@
+* ARM L2 Cache Controller
+
+ARM cores often have a separate level 2 cache controller. There are various
+implementations of the L2 cache controller with compatible programming models.
+The ARM L2 cache representation in the device tree should be done as follows:
+
+Required properties:
+
+- compatible : should be one of:
+ "arm,pl310-cache"
+ "arm,l220-cache"
+ "arm,l210-cache"
+- cache-unified : Specifies the cache is a unified cache.
+- cache-level : Should be set to 2 for a level 2 cache.
+- reg : Physical base address and size of cache controller's memory mapped
+ registers.
+
+Optional properties:
+
+- arm,data-latency : Cycles of latency for Data RAM accesses. Specifies 3 cells of
+ read, write and setup latencies. Minimum valid values are 1. Controllers
+ without setup latency control should use a value of 0.
+- arm,tag-latency : Cycles of latency for Tag RAM accesses. Specifies 3 cells of
+ read, write and setup latencies. Controllers without setup latency control
+ should use 0. Controllers without separate read and write Tag RAM latency
+ values should only use the first cell.
+- arm,dirty-latency : Cycles of latency for Dirty RAMs. This is a single cell.
+- arm,filter-ranges : <start length> Starting address and length of window to
+ filter. Addresses in the filter window are directed to the M1 port. Other
+ addresses will go to the M0 port.
+- interrupts : 1 combined interrupt.
+
+Example:
+
+L2: cache-controller {
+ compatible = "arm,pl310-cache";
+ reg = <0xfff12000 0x1000>;
+ arm,data-latency = <1 1 1>;
+ arm,tag-latency = <2 2 2>;
+ arm,filter-latency = <0x80000000 0x8000000>;
+ cache-unified;
+ cache-level = <2>;
+ interrupts = <45>;
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/dsp.txt b/Documentation/devicetree/bindings/arm/omap/dsp.txt
new file mode 100644
index 0000000..d3830a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/dsp.txt
@@ -0,0 +1,14 @@
+* TI - DSP (Digital Signal Processor)
+
+TI DSP included in OMAP SoC
+
+Required properties:
+- compatible : Should be "ti,omap3-c64" for OMAP3 & 4
+- ti,hwmods: "dsp"
+
+Examples:
+
+dsp {
+ compatible = "ti,omap3-c64";
+ ti,hwmods = "dsp";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/iva.txt b/Documentation/devicetree/bindings/arm/omap/iva.txt
new file mode 100644
index 0000000..6d62951
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/iva.txt
@@ -0,0 +1,19 @@
+* TI - IVA (Imaging and Video Accelerator) subsystem
+
+The IVA contain various audio, video or imaging HW accelerator
+depending of the version.
+
+Required properties:
+- compatible : Should be:
+ - "ti,ivahd" for OMAP4
+ - "ti,iva2.2" for OMAP3
+ - "ti,iva2.1" for OMAP2430
+ - "ti,iva1" for OMAP2420
+- ti,hwmods: "iva"
+
+Examples:
+
+iva {
+ compatible = "ti,ivahd", "ti,iva";
+ ti,hwmods = "iva";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
new file mode 100644
index 0000000..6888a5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
@@ -0,0 +1,19 @@
+* TI - L3 Network On Chip (NoC)
+
+This version is an implementation of the generic NoC IP
+provided by Arteris.
+
+Required properties:
+- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
+ Should be "ti,omap4-l3-noc" for OMAP4 family
+- ti,hwmods: "l3_main_1", ... One hwmod for each noc domain.
+
+Examples:
+
+ocp {
+ compatible = "ti,omap4-l3-noc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/mpu.txt b/Documentation/devicetree/bindings/arm/omap/mpu.txt
new file mode 100644
index 0000000..1a5a42c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/mpu.txt
@@ -0,0 +1,27 @@
+* TI - MPU (Main Processor Unit) subsystem
+
+The MPU subsystem contain one or several ARM cores
+depending of the version.
+The MPU contain CPUs, GIC, L2 cache and a local PRCM.
+
+Required properties:
+- compatible : Should be "ti,omap3-mpu" for OMAP3
+ Should be "ti,omap4-mpu" for OMAP4
+- ti,hwmods: "mpu"
+
+Examples:
+
+- For an OMAP4 SMP system:
+
+mpu {
+ compatible = "ti,omap4-mpu";
+ ti,hwmods = "mpu";
+};
+
+
+- For an OMAP3 monocore system:
+
+mpu {
+ compatible = "ti,omap3-mpu";
+ ti,hwmods = "mpu";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
new file mode 100644
index 0000000..dbdab40
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -0,0 +1,43 @@
+* Texas Instruments OMAP
+
+OMAP is currently using a static file per SoC family to describe the
+IPs present in the SoC.
+On top of that an omap_device is created to extend the platform_device
+capabilities and to allow binding with one or several hwmods.
+The hwmods will contain all the information to build the device:
+adresse range, irq lines, dma lines, interconnect, PRCM register,
+clock domain, input clocks.
+For the moment just point to the existing hwmod, the next step will be
+to move data from hwmod to device-tree representation.
+
+
+Required properties:
+- compatible: Every devices present in OMAP SoC should be in the
+ form: "ti,XXX"
+- ti,hwmods: list of hwmod names (ascii strings), that comes from the OMAP
+ HW documentation, attached to a device. Must contain at least
+ one hwmod.
+
+Optional properties:
+- ti,no_idle_on_suspend: When present, it prevents the PM to idle the module
+ during suspend.
+
+
+Example:
+
+spinlock@1 {
+ compatible = "ti,omap4-spinlock";
+ ti,hwmods = "spinlock";
+};
+
+
+Boards:
+
+- OMAP3 BeagleBoard : Low cost community board
+ compatible = "ti,omap3-beagle", "ti,omap3"
+
+- OMAP4 SDP : Software Developement Board
+ compatible = "ti,omap4-sdp", "ti,omap4430"
+
+- OMAP4 PandaBoard : Low cost community board
+ compatible = "ti,omap4-panda", "ti,omap4430"
diff --git a/Documentation/devicetree/bindings/arm/picoxcell.txt b/Documentation/devicetree/bindings/arm/picoxcell.txt
new file mode 100644
index 0000000..e75c0ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/picoxcell.txt
@@ -0,0 +1,24 @@
+Picochip picoXcell device tree bindings.
+========================================
+
+Required root node properties:
+ - compatible:
+ - "picochip,pc7302-pc3x3" : PC7302 development board with PC3X3 device.
+ - "picochip,pc7302-pc3x2" : PC7302 development board with PC3X2 device.
+ - "picochip,pc3x3" : picoXcell PC3X3 device based board.
+ - "picochip,pc3x2" : picoXcell PC3X2 device based board.
+
+Timers required properties:
+ - compatible = "picochip,pc3x2-timer"
+ - interrupts : The single IRQ line for the timer.
+ - clock-freq : The frequency in HZ of the timer.
+ - reg : The register bank for the timer.
+
+Note: two timers are required - one for the scheduler clock and one for the
+event tick/NOHZ.
+
+VIC required properties:
+ - compatible = "arm,pl192-vic".
+ - interrupt-controller.
+ - reg : The register bank for the device.
+ - #interrupt-cells : Must be 1.
diff --git a/Documentation/devicetree/bindings/tty/serial/msm_serial.txt b/Documentation/devicetree/bindings/tty/serial/msm_serial.txt
new file mode 100644
index 0000000..aef383e
--- /dev/null
+++ b/Documentation/devicetree/bindings/tty/serial/msm_serial.txt
@@ -0,0 +1,27 @@
+* Qualcomm MSM UART
+
+Required properties:
+- compatible :
+ - "qcom,msm-uart", and one of "qcom,msm-hsuart" or
+ "qcom,msm-lsuart".
+- reg : offset and length of the register set for the device
+ for the hsuart operating in compatible mode, there should be a
+ second pair describing the gsbi registers.
+- interrupts : should contain the uart interrupt.
+
+There are two different UART blocks used in MSM devices,
+"qcom,msm-hsuart" and "qcom,msm-lsuart". The msm-serial driver is
+able to handle both of these, and matches against the "qcom,msm-uart"
+as the compatibility.
+
+The registers for the "qcom,msm-hsuart" device need to specify both
+register blocks, even for the common driver.
+
+Example:
+
+ uart@19c400000 {
+ compatible = "qcom,msm-hsuart", "qcom,msm-uart";
+ reg = <0x19c40000 0x1000>,
+ <0x19c00000 0x1000>;
+ interrupts = <195>;
+ };
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 854ed5ca..d6e6724 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2706,10 +2706,11 @@
functions are at fixed addresses, they make nice
targets for exploits that can control RIP.
- emulate [default] Vsyscalls turn into traps and are
- emulated reasonably safely.
+ emulate Vsyscalls turn into traps and are emulated
+ reasonably safely.
- native Vsyscalls are native syscall instructions.
+ native [default] Vsyscalls are native syscall
+ instructions.
This is a little bit faster than trapping
and makes a few dynamic recompilers work
better than they would in emulation mode.
diff --git a/Documentation/networking/scaling.txt b/Documentation/networking/scaling.txt
index 8ce7c30..fe67b5c 100644
--- a/Documentation/networking/scaling.txt
+++ b/Documentation/networking/scaling.txt
@@ -27,7 +27,7 @@
of logical flows. Packets for each flow are steered to a separate receive
queue, which in turn can be processed by separate CPUs. This mechanism is
generally known as “Receive-side Scaling” (RSS). The goal of RSS and
-the other scaling techniques to increase performance uniformly.
+the other scaling techniques is to increase performance uniformly.
Multi-queue distribution can also be used for traffic prioritization, but
that is not the focus of these techniques.
@@ -186,10 +186,10 @@
same CPU. Indeed, with many flows and few CPUs, it is very likely that
a single application thread handles flows with many different flow hashes.
-rps_sock_table is a global flow table that contains the *desired* CPU for
-flows: the CPU that is currently processing the flow in userspace. Each
-table value is a CPU index that is updated during calls to recvmsg and
-sendmsg (specifically, inet_recvmsg(), inet_sendmsg(), inet_sendpage()
+rps_sock_flow_table is a global flow table that contains the *desired* CPU
+for flows: the CPU that is currently processing the flow in userspace.
+Each table value is a CPU index that is updated during calls to recvmsg
+and sendmsg (specifically, inet_recvmsg(), inet_sendmsg(), inet_sendpage()
and tcp_splice_read()).
When the scheduler moves a thread to a new CPU while it has outstanding
diff --git a/MAINTAINERS b/MAINTAINERS
index 33478f7..1ba8fff 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -688,6 +688,12 @@
F: drivers/mtd/nand/bcm_umi_bch.c
F: drivers/mtd/nand/nand_bcm_umi.h
+ARM/CALXEDA HIGHBANK ARCHITECTURE
+M: Rob Herring <rob.herring@calxeda.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-highbank/
+
ARM/CAVIUM NETWORKS CNS3XXX MACHINE SUPPORT
M: Anton Vorontsov <avorontsov@mvista.com>
S: Maintained
@@ -2467,7 +2473,7 @@
F: drivers/infiniband/hw/ehca/
EHEA (IBM pSeries eHEA 10Gb ethernet adapter) DRIVER
-M: Breno Leitao <leitao@linux.vnet.ibm.com>
+M: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ehea/
@@ -3320,7 +3326,7 @@
L: iommu@lists.linux-foundation.org
T: git git://git.infradead.org/iommu-2.6.git
S: Supported
-F: drivers/pci/intel-iommu.c
+F: drivers/iommu/intel-iommu.c
F: include/linux/intel-iommu.h
INTEL IOP-ADMA DMA DRIVER
@@ -6373,10 +6379,10 @@
TEGRA SUPPORT
M: Colin Cross <ccross@android.com>
-M: Erik Gilling <konkers@android.com>
M: Olof Johansson <olof@lixom.net>
+M: Stephen Warren <swarren@nvidia.com>
L: linux-tegra@vger.kernel.org
-T: git git://android.git.kernel.org/kernel/tegra.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra.git
S: Supported
F: arch/arm/mach-tegra
diff --git a/Makefile b/Makefile
index 31f967c..07bc925 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 1
SUBLEVEL = 0
-EXTRAVERSION = -rc9
+EXTRAVERSION =
NAME = "Divemaster Edition"
# *DOCUMENTATION*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 18400a7..f41fe7a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -330,6 +330,20 @@
help
Support for Broadcom's BCMRing platform.
+config ARCH_HIGHBANK
+ bool "Calxeda Highbank-based"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_AMBA
+ select ARM_GIC
+ select ARM_TIMER_SP804
+ select CLKDEV_LOOKUP
+ select CPU_V7
+ select GENERIC_CLOCKEVENTS
+ select HAVE_ARM_SCU
+ select USE_OF
+ help
+ Support for the Calxeda Highbank SoC based boards.
+
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x-based"
select CPU_ARM720T
@@ -629,6 +643,24 @@
This enables support for NVIDIA Tegra based systems (Tegra APX,
Tegra 6xx and Tegra 2 series).
+config ARCH_PICOXCELL
+ bool "Picochip picoXcell"
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_PATCH_PHYS_VIRT
+ select ARM_VIC
+ select CPU_V6K
+ select DW_APB_TIMER
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
+ select HAVE_SCHED_CLOCK
+ select HAVE_TCM
+ select NO_IOPORT
+ select USE_OF
+ help
+ This enables support for systems based on the Picochip picoXcell
+ family of Femtocell devices. The picoxcell support requires device tree
+ for all boards.
+
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
select CPU_ARM926T
@@ -862,6 +894,7 @@
select CLKDEV_LOOKUP
select HAVE_MACH_CLKDEV
select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
select NEED_MACH_MEMORY_H
help
Support for ST-Ericsson U300 series mobile platforms.
@@ -1402,7 +1435,7 @@
depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
- ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || SOC_IMX6Q
+ ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || ARCH_HIGHBANK || SOC_IMX6Q
select USE_GENERIC_SMP_HELPERS
select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
help
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index a1cb484..c865b92 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -128,6 +128,13 @@
Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
+ config DEBUG_HIGHBANK_UART
+ bool "Kernel low-level debugging messages via Highbank UART"
+ depends on ARCH_HIGHBANK
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the UART on Highbank based devices.
+
config DEBUG_IMX1_UART
bool "i.MX1 Debug UART"
depends on SOC_IMX1
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 4e98937..ae458ae 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -144,6 +144,7 @@
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
machine-$(CONFIG_ARCH_GEMINI) := gemini
machine-$(CONFIG_ARCH_H720X) := h720x
+machine-$(CONFIG_ARCH_HIGHBANK) := highbank
machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
machine-$(CONFIG_ARCH_IOP13XX) := iop13xx
machine-$(CONFIG_ARCH_IOP32X) := iop32x
@@ -168,6 +169,7 @@
machine-$(CONFIG_ARCH_OMAP3) := omap2
machine-$(CONFIG_ARCH_OMAP4) := omap2
machine-$(CONFIG_ARCH_ORION5X) := orion5x
+machine-$(CONFIG_ARCH_PICOXCELL) := picoxcell
machine-$(CONFIG_ARCH_PNX4008) := pnx4008
machine-$(CONFIG_ARCH_PRIMA2) := prima2
machine-$(CONFIG_ARCH_PXA) := pxa
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
new file mode 100644
index 0000000..aeef042
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -0,0 +1,119 @@
+/*
+ * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
+ * 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9G20 family SoC";
+ compatible = "atmel,at91sam9g20";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ serial1 = &usart0;
+ serial2 = &usart1;
+ serial3 = &usart2;
+ serial4 = &usart3;
+ serial5 = &usart4;
+ serial6 = &usart5;
+ };
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ memory@20000000 {
+ reg = <0x20000000 0x08000000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ aic: interrupt-controller@fffff000 {
+ #interrupt-cells = <1>;
+ compatible = "atmel,at91rm9200-aic";
+ interrupt-controller;
+ interrupt-parent;
+ reg = <0xfffff000 0x200>;
+ };
+
+ dbgu: serial@fffff200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffff200 0x200>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ usart0: serial@fffb0000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb0000 0x200>;
+ interrupts = <6>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart1: serial@fffb4000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb4000 0x200>;
+ interrupts = <7>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart2: serial@fffb8000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb8000 0x200>;
+ interrupts = <8>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart3: serial@fffd0000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffd0000 0x200>;
+ interrupts = <23>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart4: serial@fffd4000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffd4000 0x200>;
+ interrupts = <24>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart5: serial@fffd8000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffd8000 0x200>;
+ interrupts = <25>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
new file mode 100644
index 0000000..db6a452
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -0,0 +1,106 @@
+/*
+ * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC
+ * applies to AT91SAM9G45, AT91SAM9M10,
+ * AT91SAM9G46, AT91SAM9M11 SoC
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9G45 family SoC";
+ compatible = "atmel,at91sam9g45";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ serial1 = &usart0;
+ serial2 = &usart1;
+ serial3 = &usart2;
+ serial4 = &usart3;
+ };
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ memory@70000000 {
+ reg = <0x70000000 0x10000000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ aic: interrupt-controller@fffff000 {
+ #interrupt-cells = <1>;
+ compatible = "atmel,at91rm9200-aic";
+ interrupt-controller;
+ interrupt-parent;
+ reg = <0xfffff000 0x200>;
+ };
+
+ dma: dma-controller@ffffec00 {
+ compatible = "atmel,at91sam9g45-dma";
+ reg = <0xffffec00 0x200>;
+ interrupts = <21>;
+ };
+
+ dbgu: serial@ffffee00 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xffffee00 0x200>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ usart0: serial@fff8c000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfff8c000 0x200>;
+ interrupts = <7>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart1: serial@fff90000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfff90000 0x200>;
+ interrupts = <8>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart2: serial@fff94000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfff94000 0x200>;
+ interrupts = <9>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart3: serial@fff98000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfff98000 0x200>;
+ interrupts = <10>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
new file mode 100644
index 0000000..85b34f5
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -0,0 +1,35 @@
+/*
+ * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9g45.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9M10G45-EK";
+ compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:4M(bootstrap/uboot/kernel)ro,60M(rootfs),-(data) root=/dev/mtdblock1 rw rootfstype=jffs2";
+ };
+
+ memory@70000000 {
+ reg = <0x70000000 0x4000000>;
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@ffffee00 {
+ status = "okay";
+ };
+
+ usart1: serial@fff90000 {
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
new file mode 100644
index 0000000..aeb1a75
--- /dev/null
+++ b/arch/arm/boot/dts/highbank.dts
@@ -0,0 +1,198 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+
+/* First 4KB has pen for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+
+/ {
+ model = "Calxeda Highbank";
+ compatible = "calxeda,highbank";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a9";
+ reg = <2>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a9";
+ reg = <3>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x00000000 0xff900000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyAMA0";
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ timer@fff10600 {
+ compatible = "arm,smp-twd";
+ reg = <0xfff10600 0x20>;
+ interrupts = <1 13 0xf04>;
+ };
+
+ watchdog@fff10620 {
+ compatible = "arm,cortex-a9-wdt";
+ reg = <0xfff10620 0x20>;
+ interrupts = <1 14 0xf04>;
+ };
+
+ intc: interrupt-controller@fff11000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #size-cells = <0>;
+ #address-cells = <1>;
+ interrupt-controller;
+ interrupt-parent;
+ reg = <0xfff11000 0x1000>,
+ <0xfff10100 0x100>;
+ };
+
+ L2: l2-cache {
+ compatible = "arm,pl310-cache";
+ reg = <0xfff12000 0x1000>;
+ interrupts = <0 70 4>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>;
+ };
+
+ sata@ffe08000 {
+ compatible = "calxeda,hb-ahci";
+ reg = <0xffe08000 0x10000>;
+ interrupts = <0 83 4>;
+ };
+
+ sdhci@ffe0e000 {
+ compatible = "calxeda,hb-sdhci";
+ reg = <0xffe0e000 0x1000>;
+ interrupts = <0 90 4>;
+ };
+
+ ipc@fff20000 {
+ compatible = "arm,pl320", "arm,primecell";
+ reg = <0xfff20000 0x1000>;
+ interrupts = <0 7 4>;
+ };
+
+ gpioe: gpio@fff30000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0xfff30000 0x1000>;
+ interrupts = <0 14 4>;
+ };
+
+ gpiof: gpio@fff31000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0xfff31000 0x1000>;
+ interrupts = <0 15 4>;
+ };
+
+ gpiog: gpio@fff32000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0xfff32000 0x1000>;
+ interrupts = <0 16 4>;
+ };
+
+ gpioh: gpio@fff33000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0xfff33000 0x1000>;
+ interrupts = <0 17 4>;
+ };
+
+ timer {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0xfff34000 0x1000>;
+ interrupts = <0 18 4>;
+ };
+
+ rtc@fff35000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0xfff35000 0x1000>;
+ interrupts = <0 19 4>;
+ };
+
+ serial@fff36000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xfff36000 0x1000>;
+ interrupts = <0 20 4>;
+ };
+
+ smic@fff3a000 {
+ compatible = "ipmi-smic";
+ device_type = "ipmi";
+ reg = <0xfff3a000 0x1000>;
+ interrupts = <0 24 4>;
+ reg-size = <4>;
+ reg-spacing = <4>;
+ };
+
+ sregs@fff3c000 {
+ compatible = "calxeda,hb-sregs";
+ reg = <0xfff3c000 0x1000>;
+ };
+
+ dma@fff3d000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0xfff3d000 0x1000>;
+ interrupts = <0 92 4>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
new file mode 100644
index 0000000..f8766af
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -0,0 +1,135 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx51.dtsi"
+
+/ {
+ model = "Freescale i.MX51 Babbage Board";
+ compatible = "fsl,imx51-babbage", "fsl,imx51";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+ };
+
+ memory {
+ reg = <0x90000000 0x20000000>;
+ };
+
+ soc {
+ aips@70000000 { /* aips-1 */
+ spba@70000000 {
+ esdhc@70004000 { /* ESDHC1 */
+ fsl,cd-internal;
+ fsl,wp-internal;
+ status = "okay";
+ };
+
+ esdhc@70008000 { /* ESDHC2 */
+ cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */
+ wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */
+ status = "okay";
+ };
+
+ uart2: uart@7000c000 { /* UART3 */
+ fsl,uart-has-rtscts;
+ status = "okay";
+ };
+
+ ecspi@70010000 { /* ECSPI1 */
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
+ <&gpio3 25 0>; /* GPIO4_25 */
+ status = "okay";
+
+ pmic: mc13892@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mc13892";
+ spi-max-frequency = <6000000>;
+ reg = <0>;
+ mc13xxx-irq-gpios = <&gpio0 8 0>; /* GPIO1_8 */
+ fsl,mc13xxx-uses-regulator;
+ };
+
+ flash: at45db321d@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <25000000>;
+ reg = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0x3c0000>;
+ };
+ };
+ };
+ };
+
+ wdog@73f98000 { /* WDOG1 */
+ status = "okay";
+ };
+
+ iomuxc@73fa8000 {
+ compatible = "fsl,imx51-iomuxc-babbage";
+ reg = <0x73fa8000 0x4000>;
+ };
+
+ uart0: uart@73fbc000 {
+ fsl,uart-has-rtscts;
+ status = "okay";
+ };
+
+ uart1: uart@73fc0000 {
+ status = "okay";
+ };
+ };
+
+ aips@80000000 { /* aips-2 */
+ sdma@83fb0000 {
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
+ };
+
+ i2c@83fc4000 { /* I2C2 */
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ };
+ };
+
+ fec@83fec000 {
+ phy-mode = "mii";
+ status = "okay";
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio1 21 0>;
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
new file mode 100644
index 0000000..327ab8e
--- /dev/null
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -0,0 +1,246 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
+ tzic: tz-interrupt-controller@e0000000 {
+ compatible = "fsl,imx51-tzic", "fsl,tzic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xe0000000 0x4000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ckil {
+ compatible = "fsl,imx-ckil", "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ ckih1 {
+ compatible = "fsl,imx-ckih1", "fixed-clock";
+ clock-frequency = <22579200>;
+ };
+
+ ckih2 {
+ compatible = "fsl,imx-ckih2", "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ osc {
+ compatible = "fsl,imx-osc", "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&tzic>;
+ ranges;
+
+ aips@70000000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x70000000 0x10000000>;
+ ranges;
+
+ spba@70000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x70000000 0x40000>;
+ ranges;
+
+ esdhc@70004000 { /* ESDHC1 */
+ compatible = "fsl,imx51-esdhc";
+ reg = <0x70004000 0x4000>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ esdhc@70008000 { /* ESDHC2 */
+ compatible = "fsl,imx51-esdhc";
+ reg = <0x70008000 0x4000>;
+ interrupts = <2>;
+ status = "disabled";
+ };
+
+ uart2: uart@7000c000 { /* UART3 */
+ compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+ reg = <0x7000c000 0x4000>;
+ interrupts = <33>;
+ status = "disabled";
+ };
+
+ ecspi@70010000 { /* ECSPI1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx51-ecspi";
+ reg = <0x70010000 0x4000>;
+ interrupts = <36>;
+ status = "disabled";
+ };
+
+ esdhc@70020000 { /* ESDHC3 */
+ compatible = "fsl,imx51-esdhc";
+ reg = <0x70020000 0x4000>;
+ interrupts = <3>;
+ status = "disabled";
+ };
+
+ esdhc@70024000 { /* ESDHC4 */
+ compatible = "fsl,imx51-esdhc";
+ reg = <0x70024000 0x4000>;
+ interrupts = <4>;
+ status = "disabled";
+ };
+ };
+
+ gpio0: gpio@73f84000 { /* GPIO1 */
+ compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
+ reg = <0x73f84000 0x4000>;
+ interrupts = <50 51>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio1: gpio@73f88000 { /* GPIO2 */
+ compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
+ reg = <0x73f88000 0x4000>;
+ interrupts = <52 53>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio2: gpio@73f8c000 { /* GPIO3 */
+ compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
+ reg = <0x73f8c000 0x4000>;
+ interrupts = <54 55>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio3: gpio@73f90000 { /* GPIO4 */
+ compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
+ reg = <0x73f90000 0x4000>;
+ interrupts = <56 57>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ wdog@73f98000 { /* WDOG1 */
+ compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
+ reg = <0x73f98000 0x4000>;
+ interrupts = <58>;
+ status = "disabled";
+ };
+
+ wdog@73f9c000 { /* WDOG2 */
+ compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
+ reg = <0x73f9c000 0x4000>;
+ interrupts = <59>;
+ status = "disabled";
+ };
+
+ uart0: uart@73fbc000 {
+ compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+ reg = <0x73fbc000 0x4000>;
+ interrupts = <31>;
+ status = "disabled";
+ };
+
+ uart1: uart@73fc0000 {
+ compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+ reg = <0x73fc0000 0x4000>;
+ interrupts = <32>;
+ status = "disabled";
+ };
+ };
+
+ aips@80000000 { /* AIPS2 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x10000000>;
+ ranges;
+
+ ecspi@83fac000 { /* ECSPI2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx51-ecspi";
+ reg = <0x83fac000 0x4000>;
+ interrupts = <37>;
+ status = "disabled";
+ };
+
+ sdma@83fb0000 {
+ compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
+ reg = <0x83fb0000 0x4000>;
+ interrupts = <6>;
+ };
+
+ cspi@83fc0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
+ reg = <0x83fc0000 0x4000>;
+ interrupts = <38>;
+ status = "disabled";
+ };
+
+ i2c@83fc4000 { /* I2C2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ reg = <0x83fc4000 0x4000>;
+ interrupts = <63>;
+ status = "disabled";
+ };
+
+ i2c@83fc8000 { /* I2C1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ reg = <0x83fc8000 0x4000>;
+ interrupts = <62>;
+ status = "disabled";
+ };
+
+ fec@83fec000 {
+ compatible = "fsl,imx51-fec", "fsl,imx27-fec";
+ reg = <0x83fec000 0x4000>;
+ interrupts = <87>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
new file mode 100644
index 0000000..2ab7f80
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx53.dtsi"
+
+/ {
+ model = "Freescale i.MX53 Automotive Reference Design Board";
+ compatible = "fsl,imx53-ard", "fsl,imx53";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+ };
+
+ memory {
+ reg = <0x70000000 0x40000000>;
+ };
+
+ soc {
+ aips@50000000 { /* AIPS1 */
+ spba@50000000 {
+ esdhc@50004000 { /* ESDHC1 */
+ cd-gpios = <&gpio0 1 0>; /* GPIO1_1 */
+ wp-gpios = <&gpio0 9 0>; /* GPIO1_9 */
+ status = "okay";
+ };
+ };
+
+ wdog@53f98000 { /* WDOG1 */
+ status = "okay";
+ };
+
+ iomuxc@53fa8000 {
+ compatible = "fsl,imx53-iomuxc-ard";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ uart0: uart@53fbc000 { /* UART1 */
+ status = "okay";
+ };
+ };
+
+ aips@60000000 { /* AIPS2 */
+ sdma@63fb0000 {
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+ };
+ };
+ };
+
+ eim-cs1@f4000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eim-bus", "simple-bus";
+ reg = <0xf4000000 0x3ff0000>;
+ ranges;
+
+ lan9220@f4000000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0xf4000000 0x2000000>;
+ phy-mode = "mii";
+ interrupt-parent = <&gpio1>;
+ interrupts = <31>;
+ reg-io-width = <4>;
+ smsc,irq-push-pull;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ home {
+ label = "Home";
+ gpios = <&gpio4 10 0>; /* GPIO5_10 */
+ linux,code = <102>; /* KEY_HOME */
+ gpio-key,wakeup;
+ };
+
+ back {
+ label = "Back";
+ gpios = <&gpio4 11 0>; /* GPIO5_11 */
+ linux,code = <158>; /* KEY_BACK */
+ gpio-key,wakeup;
+ };
+
+ program {
+ label = "Program";
+ gpios = <&gpio4 12 0>; /* GPIO5_12 */
+ linux,code = <362>; /* KEY_PROGRAM */
+ gpio-key,wakeup;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio4 13 0>; /* GPIO5_13 */
+ linux,code = <115>; /* KEY_VOLUMEUP */
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio3 0 0>; /* GPIO4_0 */
+ linux,code = <114>; /* KEY_VOLUMEDOWN */
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts
new file mode 100644
index 0000000..3f3a881
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-evk.dts
@@ -0,0 +1,120 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx53.dtsi"
+
+/ {
+ model = "Freescale i.MX53 Evaluation Kit";
+ compatible = "fsl,imx53-evk", "fsl,imx53";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+ };
+
+ memory {
+ reg = <0x70000000 0x80000000>;
+ };
+
+ soc {
+ aips@50000000 { /* AIPS1 */
+ spba@50000000 {
+ esdhc@50004000 { /* ESDHC1 */
+ cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
+ wp-gpios = <&gpio2 14 0>; /* GPIO3_14 */
+ status = "okay";
+ };
+
+ ecspi@50010000 { /* ECSPI1 */
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio1 30 0>, /* GPIO2_30 */
+ <&gpio2 19 0>; /* GPIO3_19 */
+ status = "okay";
+
+ flash: at45db321d@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <25000000>;
+ reg = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0x3c0000>;
+ };
+ };
+ };
+
+ esdhc@50020000 { /* ESDHC3 */
+ cd-gpios = <&gpio2 11 0>; /* GPIO3_11 */
+ wp-gpios = <&gpio2 12 0>; /* GPIO3_12 */
+ status = "okay";
+ };
+ };
+
+ wdog@53f98000 { /* WDOG1 */
+ status = "okay";
+ };
+
+ iomuxc@53fa8000 {
+ compatible = "fsl,imx53-iomuxc-evk";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ uart0: uart@53fbc000 { /* UART1 */
+ status = "okay";
+ };
+ };
+
+ aips@60000000 { /* AIPS2 */
+ sdma@63fb0000 {
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+ };
+
+ i2c@63fc4000 { /* I2C2 */
+ status = "okay";
+
+ pmic: mc13892@08 {
+ compatible = "fsl,mc13892", "fsl,mc13xxx";
+ reg = <0x08>;
+ };
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ };
+ };
+
+ fec@63fec000 {
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
+ status = "okay";
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ green {
+ label = "Heartbeat";
+ gpios = <&gpio6 7 0>; /* GPIO7_7 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
new file mode 100644
index 0000000..ae6de6d
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -0,0 +1,125 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx53.dtsi"
+
+/ {
+ model = "Freescale i.MX53 Quick Start Board";
+ compatible = "fsl,imx53-qsb", "fsl,imx53";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+ };
+
+ memory {
+ reg = <0x70000000 0x40000000>;
+ };
+
+ soc {
+ aips@50000000 { /* AIPS1 */
+ spba@50000000 {
+ esdhc@50004000 { /* ESDHC1 */
+ cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
+ status = "okay";
+ };
+
+ esdhc@50020000 { /* ESDHC3 */
+ cd-gpios = <&gpio2 11 0>; /* GPIO3_11 */
+ wp-gpios = <&gpio2 12 0>; /* GPIO3_12 */
+ status = "okay";
+ };
+ };
+
+ wdog@53f98000 { /* WDOG1 */
+ status = "okay";
+ };
+
+ iomuxc@53fa8000 {
+ compatible = "fsl,imx53-iomuxc-qsb";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ uart0: uart@53fbc000 { /* UART1 */
+ status = "okay";
+ };
+ };
+
+ aips@60000000 { /* AIPS2 */
+ sdma@63fb0000 {
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+ };
+
+ i2c@63fc4000 { /* I2C2 */
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ };
+ };
+
+ i2c@63fc8000 { /* I2C1 */
+ status = "okay";
+
+ accelerometer: mma8450@1c {
+ compatible = "fsl,mma8450";
+ reg = <0x1c>;
+ };
+
+ pmic: dialog@48 {
+ compatible = "dialog,da9053", "dialog,da9052";
+ reg = <0x48>;
+ };
+ };
+
+ fec@63fec000 {
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
+ status = "okay";
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio0 8 0>; /* GPIO1_8 */
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio1 14 0>; /* GPIO2_14 */
+ linux,code = <115>; /* KEY_VOLUMEUP */
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio1 15 0>; /* GPIO2_15 */
+ linux,code = <114>; /* KEY_VOLUMEDOWN */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ user {
+ label = "Heartbeat";
+ gpios = <&gpio6 7 0>; /* GPIO7_7 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
new file mode 100644
index 0000000..b1c062e
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -0,0 +1,169 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx53.dtsi"
+
+/ {
+ model = "Freescale i.MX53 Smart Mobile Reference Design Board";
+ compatible = "fsl,imx53-smd", "fsl,imx53";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+ };
+
+ memory {
+ reg = <0x70000000 0x40000000>;
+ };
+
+ soc {
+ aips@50000000 { /* AIPS1 */
+ spba@50000000 {
+ esdhc@50004000 { /* ESDHC1 */
+ cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
+ wp-gpios = <&gpio3 11 0>; /* GPIO4_11 */
+ status = "okay";
+ };
+
+ esdhc@50008000 { /* ESDHC2 */
+ fsl,card-wired;
+ status = "okay";
+ };
+
+ uart2: uart@5000c000 { /* UART3 */
+ fsl,uart-has-rtscts;
+ status = "okay";
+ };
+
+ ecspi@50010000 { /* ECSPI1 */
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio1 30 0>, /* GPIO2_30 */
+ <&gpio2 19 0>; /* GPIO3_19 */
+ status = "okay";
+
+ zigbee: mc1323@0 {
+ compatible = "fsl,mc1323";
+ spi-max-frequency = <8000000>;
+ reg = <0>;
+ };
+
+ flash: m25p32@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p32", "st,m25p";
+ spi-max-frequency = <20000000>;
+ reg = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0x3c0000>;
+ };
+ };
+ };
+
+ esdhc@50020000 { /* ESDHC3 */
+ fsl,card-wired;
+ status = "okay";
+ };
+ };
+
+ wdog@53f98000 { /* WDOG1 */
+ status = "okay";
+ };
+
+ iomuxc@53fa8000 {
+ compatible = "fsl,imx53-iomuxc-smd";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ uart0: uart@53fbc000 { /* UART1 */
+ status = "okay";
+ };
+
+ uart1: uart@53fc0000 { /* UART2 */
+ status = "okay";
+ };
+ };
+
+ aips@60000000 { /* AIPS2 */
+ sdma@63fb0000 {
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+ };
+
+ i2c@63fc4000 { /* I2C2 */
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ };
+
+ magnetometer: mag3110@0e {
+ compatible = "fsl,mag3110";
+ reg = <0x0e>;
+ };
+
+ touchkey: mpr121@5a {
+ compatible = "fsl,mpr121";
+ reg = <0x5a>;
+ };
+ };
+
+ i2c@63fc8000 { /* I2C1 */
+ status = "okay";
+
+ accelerometer: mma8450@1c {
+ compatible = "fsl,mma8450";
+ reg = <0x1c>;
+ };
+
+ camera: ov5642@3c {
+ compatible = "ovti,ov5642";
+ reg = <0x3c>;
+ };
+
+ pmic: dialog@48 {
+ compatible = "dialog,da9053", "dialog,da9052";
+ reg = <0x48>;
+ };
+ };
+
+ fec@63fec000 {
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
+ status = "okay";
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio1 14 0>; /* GPIO2_14 */
+ linux,code = <115>; /* KEY_VOLUMEUP */
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio1 15 0>; /* GPIO2_15 */
+ linux,code = <114>; /* KEY_VOLUMEDOWN */
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
new file mode 100644
index 0000000..099cd84
--- /dev/null
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -0,0 +1,301 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ };
+
+ tzic: tz-interrupt-controller@0fffc000 {
+ compatible = "fsl,imx53-tzic", "fsl,tzic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x0fffc000 0x4000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ckil {
+ compatible = "fsl,imx-ckil", "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ ckih1 {
+ compatible = "fsl,imx-ckih1", "fixed-clock";
+ clock-frequency = <22579200>;
+ };
+
+ ckih2 {
+ compatible = "fsl,imx-ckih2", "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ osc {
+ compatible = "fsl,imx-osc", "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&tzic>;
+ ranges;
+
+ aips@50000000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x10000000>;
+ ranges;
+
+ spba@50000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x40000>;
+ ranges;
+
+ esdhc@50004000 { /* ESDHC1 */
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50004000 0x4000>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ esdhc@50008000 { /* ESDHC2 */
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50008000 0x4000>;
+ interrupts = <2>;
+ status = "disabled";
+ };
+
+ uart2: uart@5000c000 { /* UART3 */
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x5000c000 0x4000>;
+ interrupts = <33>;
+ status = "disabled";
+ };
+
+ ecspi@50010000 { /* ECSPI1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+ reg = <0x50010000 0x4000>;
+ interrupts = <36>;
+ status = "disabled";
+ };
+
+ esdhc@50020000 { /* ESDHC3 */
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50020000 0x4000>;
+ interrupts = <3>;
+ status = "disabled";
+ };
+
+ esdhc@50024000 { /* ESDHC4 */
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50024000 0x4000>;
+ interrupts = <4>;
+ status = "disabled";
+ };
+ };
+
+ gpio0: gpio@53f84000 { /* GPIO1 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53f84000 0x4000>;
+ interrupts = <50 51>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio1: gpio@53f88000 { /* GPIO2 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53f88000 0x4000>;
+ interrupts = <52 53>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio2: gpio@53f8c000 { /* GPIO3 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53f8c000 0x4000>;
+ interrupts = <54 55>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio3: gpio@53f90000 { /* GPIO4 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53f90000 0x4000>;
+ interrupts = <56 57>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ wdog@53f98000 { /* WDOG1 */
+ compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
+ reg = <0x53f98000 0x4000>;
+ interrupts = <58>;
+ status = "disabled";
+ };
+
+ wdog@53f9c000 { /* WDOG2 */
+ compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
+ reg = <0x53f9c000 0x4000>;
+ interrupts = <59>;
+ status = "disabled";
+ };
+
+ uart0: uart@53fbc000 { /* UART1 */
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x53fbc000 0x4000>;
+ interrupts = <31>;
+ status = "disabled";
+ };
+
+ uart1: uart@53fc0000 { /* UART2 */
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x53fc0000 0x4000>;
+ interrupts = <32>;
+ status = "disabled";
+ };
+
+ gpio4: gpio@53fdc000 { /* GPIO5 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53fdc000 0x4000>;
+ interrupts = <103 104>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio5: gpio@53fe0000 { /* GPIO6 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53fe0000 0x4000>;
+ interrupts = <105 106>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio6: gpio@53fe4000 { /* GPIO7 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53fe4000 0x4000>;
+ interrupts = <107 108>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ i2c@53fec000 { /* I2C3 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+ reg = <0x53fec000 0x4000>;
+ interrupts = <64>;
+ status = "disabled";
+ };
+
+ uart3: uart@53ff0000 { /* UART4 */
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x53ff0000 0x4000>;
+ interrupts = <13>;
+ status = "disabled";
+ };
+ };
+
+ aips@60000000 { /* AIPS2 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x60000000 0x10000000>;
+ ranges;
+
+ uart4: uart@63f90000 { /* UART5 */
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x63f90000 0x4000>;
+ interrupts = <86>;
+ status = "disabled";
+ };
+
+ ecspi@63fac000 { /* ECSPI2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+ reg = <0x63fac000 0x4000>;
+ interrupts = <37>;
+ status = "disabled";
+ };
+
+ sdma@63fb0000 {
+ compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
+ reg = <0x63fb0000 0x4000>;
+ interrupts = <6>;
+ };
+
+ cspi@63fc0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
+ reg = <0x63fc0000 0x4000>;
+ interrupts = <38>;
+ status = "disabled";
+ };
+
+ i2c@63fc4000 { /* I2C2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+ reg = <0x63fc4000 0x4000>;
+ interrupts = <63>;
+ status = "disabled";
+ };
+
+ i2c@63fc8000 { /* I2C1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+ reg = <0x63fc8000 0x4000>;
+ interrupts = <62>;
+ status = "disabled";
+ };
+
+ fec@63fec000 {
+ compatible = "fsl,imx53-fec", "fsl,imx25-fec";
+ reg = <0x63fec000 0x4000>;
+ interrupts = <87>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts
new file mode 100644
index 0000000..15ded0d
--- /dev/null
+++ b/arch/arm/boot/dts/msm8660-surf.dts
@@ -0,0 +1,24 @@
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Qualcomm MSM8660 SURF";
+ compatible = "qcom,msm8660-surf", "qcom,msm8660";
+ interrupt-parent = <&intc>;
+
+ intc: interrupt-controller@02080000 {
+ compatible = "qcom,msm-8660-qgic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = < 0x02080000 0x1000 >,
+ < 0x02081000 0x1000 >;
+ };
+
+ serial@19c400000 {
+ compatible = "qcom,msm-hsuart", "qcom,msm-uart";
+ reg = <0x19c40000 0x1000>,
+ <0x19c00000 0x1000>;
+ interrupts = <195>;
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
new file mode 100644
index 0000000..9486be6
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+ model = "TI OMAP3 BeagleBoard";
+ compatible = "ti,omap3-beagle", "ti,omap3";
+
+ /*
+ * Since the initial device tree board file does not create any
+ * devices (MMC, network...), the only way to boot is to provide a
+ * ramdisk.
+ */
+ chosen {
+ bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
new file mode 100644
index 0000000..d202bb5
--- /dev/null
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -0,0 +1,63 @@
+/*
+ * Device Tree Source for OMAP3 SoC
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "ti,omap3430", "ti,omap3";
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a8";
+ };
+ };
+
+ /*
+ * The soc node represents the soc top level view. It is uses for IPs
+ * that are not memory mapped in the MPU view or for the MPU itself.
+ */
+ soc {
+ compatible = "ti,omap-infra";
+ mpu {
+ compatible = "ti,omap3-mpu";
+ ti,hwmods = "mpu";
+ };
+
+ iva {
+ compatible = "ti,iva2.2";
+ ti,hwmods = "iva";
+
+ dsp {
+ compatible = "ti,omap3-c64";
+ };
+ };
+ };
+
+ /*
+ * XXX: Use a flat representation of the OMAP3 interconnect.
+ * The real OMAP interconnect network is quite complex.
+ * Since that will not bring real advantage to represent that in DT for
+ * the moment, just use a fake OCP bus entry to represent the whole bus
+ * hierarchy.
+ */
+ ocp {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "l3_main";
+
+ intc: interrupt-controller@1 {
+ compatible = "ti,omap3-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
new file mode 100644
index 0000000..c702657
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap4.dtsi"
+
+/ {
+ model = "TI OMAP4 PandaBoard";
+ compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
+
+ /*
+ * Since the initial device tree board file does not create any
+ * devices (MMC, network...), the only way to boot is to provide a
+ * ramdisk.
+ */
+ chosen {
+ bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
new file mode 100644
index 0000000..066e28c
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap4.dtsi"
+
+/ {
+ model = "TI OMAP4 SDP board";
+ compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
+
+ /*
+ * Since the initial device tree board file does not create any
+ * devices (MMC, network...), the only way to boot is to provide a
+ * ramdisk.
+ */
+ chosen {
+ bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
new file mode 100644
index 0000000..4c61c82
--- /dev/null
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Carveout for multimedia usecases
+ * It should be the last 48MB of the first 512MB memory part
+ * In theory, it should not even exist. That zone should be reserved
+ * dynamically during the .reserve callback.
+ */
+/memreserve/ 0x9d000000 0x03000000;
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "ti,omap4430", "ti,omap4";
+ interrupt-parent = <&gic>;
+
+ aliases {
+ };
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ };
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ };
+ };
+
+ /*
+ * The soc node represents the soc top level view. It is uses for IPs
+ * that are not memory mapped in the MPU view or for the MPU itself.
+ */
+ soc {
+ compatible = "ti,omap-infra";
+ mpu {
+ compatible = "ti,omap4-mpu";
+ ti,hwmods = "mpu";
+ };
+
+ dsp {
+ compatible = "ti,omap3-c64";
+ ti,hwmods = "dsp";
+ };
+
+ iva {
+ compatible = "ti,ivahd";
+ ti,hwmods = "iva";
+ };
+ };
+
+ /*
+ * XXX: Use a flat representation of the OMAP4 interconnect.
+ * The real OMAP interconnect network is quite complex.
+ *
+ * MPU -+-- MPU_PRIVATE - GIC, L2
+ * |
+ * +----------------+----------+
+ * | | |
+ * + +- EMIF - DDR |
+ * | | |
+ * | + +--------+
+ * | | |
+ * | +- L4_ABE - AESS, MCBSP, TIMERs...
+ * | |
+ * +- L3_MAIN --+- L4_CORE - IPs...
+ * |
+ * +- L4_PER - IPs...
+ * |
+ * +- L4_CFG -+- L4_WKUP - IPs...
+ * | |
+ * | +- IPs...
+ * +- IPU ----+
+ * | |
+ * +- DSP ----+
+ * | |
+ * +- DSS ----+
+ *
+ * Since that will not bring real advantage to represent that in DT for
+ * the moment, just use a fake OCP bus entry to represent the whole bus
+ * hierarchy.
+ */
+ ocp {
+ compatible = "ti,omap4-l3-noc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+
+ gic: interrupt-controller@48241000 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x48241000 0x1000>,
+ <0x48240100 0x0100>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
new file mode 100644
index 0000000..f0a8c20
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
@@ -0,0 +1,249 @@
+/*
+ * Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+/include/ "skeleton.dtsi"
+/ {
+ model = "Picochip picoXcell PC3X2";
+ compatible = "picochip,pc3x2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,1176jz-s";
+ clock-frequency = <400000000>;
+ reg = <0>;
+ d-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pclk: clock@0 {
+ compatible = "fixed-clock";
+ clock-outputs = "bus", "pclk";
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+ };
+
+ paxi {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x80000000 0x400000>;
+
+ emac: gem@30000 {
+ compatible = "cadence,gem";
+ reg = <0x30000 0x10000>;
+ interrupts = <31>;
+ };
+
+ dmac1: dmac@40000 {
+ compatible = "snps,dw-dmac";
+ reg = <0x40000 0x10000>;
+ interrupts = <25>;
+ };
+
+ dmac2: dmac@50000 {
+ compatible = "snps,dw-dmac";
+ reg = <0x50000 0x10000>;
+ interrupts = <26>;
+ };
+
+ vic0: interrupt-controller@60000 {
+ compatible = "arm,pl192-vic";
+ interrupt-controller;
+ reg = <0x60000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ vic1: interrupt-controller@64000 {
+ compatible = "arm,pl192-vic";
+ interrupt-controller;
+ reg = <0x64000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ fuse: picoxcell-fuse@80000 {
+ compatible = "picoxcell,fuse-pc3x2";
+ reg = <0x80000 0x10000>;
+ };
+
+ ssi: picoxcell-spi@90000 {
+ compatible = "picoxcell,spi";
+ reg = <0x90000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <10>;
+ };
+
+ ipsec: spacc@100000 {
+ compatible = "picochip,spacc-ipsec";
+ reg = <0x100000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <24>;
+ ref-clock = <&pclk>, "ref";
+ };
+
+ srtp: spacc@140000 {
+ compatible = "picochip,spacc-srtp";
+ reg = <0x140000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <23>;
+ };
+
+ l2_engine: spacc@180000 {
+ compatible = "picochip,spacc-l2";
+ reg = <0x180000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <22>;
+ ref-clock = <&pclk>, "ref";
+ };
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x200000 0x80000>;
+
+ rtc0: rtc@00000 {
+ compatible = "picochip,pc3x2-rtc";
+ clock-freq = <200000000>;
+ reg = <0x00000 0xf>;
+ interrupt-parent = <&vic1>;
+ interrupts = <8>;
+ };
+
+ timer0: timer@10000 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <4>;
+ clock-freq = <200000000>;
+ reg = <0x10000 0x14>;
+ };
+
+ timer1: timer@10014 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <5>;
+ clock-freq = <200000000>;
+ reg = <0x10014 0x14>;
+ };
+
+ timer2: timer@10028 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <6>;
+ clock-freq = <200000000>;
+ reg = <0x10028 0x14>;
+ };
+
+ timer3: timer@1003c {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <7>;
+ clock-freq = <200000000>;
+ reg = <0x1003c 0x14>;
+ };
+
+ gpio: gpio@20000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x20000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg-io-width = <4>;
+
+ banka: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-bank";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-generic,nr-gpio = <8>;
+
+ regoffset-dat = <0x50>;
+ regoffset-set = <0x00>;
+ regoffset-dirout = <0x04>;
+ };
+
+ bankb: gpio-controller@1 {
+ compatible = "snps,dw-apb-gpio-bank";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-generic,nr-gpio = <8>;
+
+ regoffset-dat = <0x54>;
+ regoffset-set = <0x0c>;
+ regoffset-dirout = <0x10>;
+ };
+ };
+
+ uart0: uart@30000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x30000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <10>;
+ clock-frequency = <3686400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ uart1: uart@40000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x40000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <9>;
+ clock-frequency = <3686400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ wdog: watchdog@50000 {
+ compatible = "snps,dw-apb-wdg";
+ reg = <0x50000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <11>;
+ bus-clock = <&pclk>, "bus";
+ };
+ };
+ };
+
+ rwid-axi {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ ebi@50000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x40000000 0x08000000
+ 1 0 0x48000000 0x08000000
+ 2 0 0x50000000 0x08000000
+ 3 0 0x58000000 0x08000000>;
+ };
+
+ axi2pico@c0000000 {
+ compatible = "picochip,axi2pico-pc3x2";
+ reg = <0xc0000000 0x10000>;
+ interrupts = <13 14 15 16 17 18 19 20 21>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi
new file mode 100644
index 0000000..daa962d
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi
@@ -0,0 +1,365 @@
+/*
+ * Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+/include/ "skeleton.dtsi"
+/ {
+ model = "Picochip picoXcell PC3X3";
+ compatible = "picochip,pc3x3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,1176jz-s";
+ cpu-clock = <&arm_clk>, "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clkgate: clkgate@800a0048 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x800a0048 4>;
+ compatible = "picochip,pc3x3-clk-gate";
+
+ tzprot_clk: clock@0 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <0>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ spi_clk: clock@1 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <1>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ dmac0_clk: clock@2 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <2>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ dmac1_clk: clock@3 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <3>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ ebi_clk: clock@4 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <4>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ ipsec_clk: clock@5 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <5>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ l2_clk: clock@6 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <6>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ trng_clk: clock@7 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <7>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ fuse_clk: clock@8 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <8>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ otp_clk: clock@9 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <9>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+ };
+
+ arm_clk: clock@11 {
+ compatible = "picochip,pc3x3-pll";
+ reg = <0x800a0050 0x8>;
+ picochip,min-freq = <140000000>;
+ picochip,max-freq = <700000000>;
+ ref-clock = <&ref_clk>, "ref";
+ clock-outputs = "cpu";
+ };
+
+ pclk: clock@12 {
+ compatible = "fixed-clock";
+ clock-outputs = "bus", "pclk";
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+ };
+
+ paxi {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x80000000 0x400000>;
+
+ emac: gem@30000 {
+ compatible = "cadence,gem";
+ reg = <0x30000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <31>;
+ };
+
+ dmac1: dmac@40000 {
+ compatible = "snps,dw-dmac";
+ reg = <0x40000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <25>;
+ };
+
+ dmac2: dmac@50000 {
+ compatible = "snps,dw-dmac";
+ reg = <0x50000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <26>;
+ };
+
+ vic0: interrupt-controller@60000 {
+ compatible = "arm,pl192-vic";
+ interrupt-controller;
+ reg = <0x60000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ vic1: interrupt-controller@64000 {
+ compatible = "arm,pl192-vic";
+ interrupt-controller;
+ reg = <0x64000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ fuse: picoxcell-fuse@80000 {
+ compatible = "picoxcell,fuse-pc3x3";
+ reg = <0x80000 0x10000>;
+ };
+
+ ssi: picoxcell-spi@90000 {
+ compatible = "picoxcell,spi";
+ reg = <0x90000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <10>;
+ };
+
+ ipsec: spacc@100000 {
+ compatible = "picochip,spacc-ipsec";
+ reg = <0x100000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <24>;
+ ref-clock = <&ipsec_clk>, "ref";
+ };
+
+ srtp: spacc@140000 {
+ compatible = "picochip,spacc-srtp";
+ reg = <0x140000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <23>;
+ };
+
+ l2_engine: spacc@180000 {
+ compatible = "picochip,spacc-l2";
+ reg = <0x180000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <22>;
+ ref-clock = <&l2_clk>, "ref";
+ };
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x200000 0x80000>;
+
+ rtc0: rtc@00000 {
+ compatible = "picochip,pc3x2-rtc";
+ clock-freq = <200000000>;
+ reg = <0x00000 0xf>;
+ interrupt-parent = <&vic0>;
+ interrupts = <8>;
+ };
+
+ timer0: timer@10000 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <4>;
+ clock-freq = <200000000>;
+ reg = <0x10000 0x14>;
+ };
+
+ timer1: timer@10014 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <5>;
+ clock-freq = <200000000>;
+ reg = <0x10014 0x14>;
+ };
+
+ gpio: gpio@20000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x20000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg-io-width = <4>;
+
+ banka: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-bank";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-generic,nr-gpio = <8>;
+
+ regoffset-dat = <0x50>;
+ regoffset-set = <0x00>;
+ regoffset-dirout = <0x04>;
+ };
+
+ bankb: gpio-controller@1 {
+ compatible = "snps,dw-apb-gpio-bank";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-generic,nr-gpio = <16>;
+
+ regoffset-dat = <0x54>;
+ regoffset-set = <0x0c>;
+ regoffset-dirout = <0x10>;
+ };
+
+ bankd: gpio-controller@2 {
+ compatible = "snps,dw-apb-gpio-bank";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-generic,nr-gpio = <30>;
+
+ regoffset-dat = <0x5c>;
+ regoffset-set = <0x24>;
+ regoffset-dirout = <0x28>;
+ };
+ };
+
+ uart0: uart@30000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x30000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <10>;
+ clock-frequency = <3686400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ uart1: uart@40000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x40000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <9>;
+ clock-frequency = <3686400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ wdog: watchdog@50000 {
+ compatible = "snps,dw-apb-wdg";
+ reg = <0x50000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <11>;
+ bus-clock = <&pclk>, "bus";
+ };
+
+ timer2: timer@60000 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <6>;
+ clock-freq = <200000000>;
+ reg = <0x60000 0x14>;
+ };
+
+ timer3: timer@60014 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <7>;
+ clock-freq = <200000000>;
+ reg = <0x60014 0x14>;
+ };
+ };
+ };
+
+ rwid-axi {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ ebi@50000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x40000000 0x08000000
+ 1 0 0x48000000 0x08000000
+ 2 0 0x50000000 0x08000000
+ 3 0 0x58000000 0x08000000>;
+ };
+
+ axi2pico@c0000000 {
+ compatible = "picochip,axi2pico-pc3x3";
+ reg = <0xc0000000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <13 14 15 16 17 18 19 20 21>;
+ };
+
+ otp@ffff8000 {
+ compatible = "picochip,otp-pc3x3";
+ reg = <0xffff8000 0x8000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts b/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts
new file mode 100644
index 0000000..1297414
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+/include/ "picoxcell-pc3x2.dtsi"
+/ {
+ model = "Picochip PC7302 (PC3X2)";
+ compatible = "picochip,pc7302-pc3x2", "picochip,pc3x2";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+
+ chosen {
+ linux,stdout-path = &uart0;
+ };
+
+ clocks {
+ ref_clk: clock@1 {
+ compatible = "fixed-clock";
+ clock-outputs = "ref";
+ clock-frequency = <20000000>;
+ };
+ };
+
+ rwid-axi {
+ ebi@50000000 {
+ nand: gpio-nand@2,0 {
+ compatible = "gpio-control-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <2 0x0000 0x1000>;
+ bus-clock = <&pclk>, "bus";
+ gpio-control-nand,io-sync-reg =
+ <0x00000000 0x80220000>;
+
+ gpios = <&banka 1 0 /* rdy */
+ &banka 2 0 /* nce */
+ &banka 3 0 /* ale */
+ &banka 4 0 /* cle */
+ 0 /* nwp */>;
+
+ boot@100000 {
+ label = "Boot";
+ reg = <0x100000 0x80000>;
+ };
+
+ redundant-boot@200000 {
+ label = "Redundant Boot";
+ reg = <0x200000 0x80000>;
+ };
+
+ boot-env@300000 {
+ label = "Boot Evironment";
+ reg = <0x300000 0x20000>;
+ };
+
+ redundant-boot-env@320000 {
+ label = "Redundant Boot Environment";
+ reg = <0x300000 0x20000>;
+ };
+
+ kernel@380000 {
+ label = "Kernel";
+ reg = <0x380000 0x800000>;
+ };
+
+ fs@b80000 {
+ label = "File System";
+ reg = <0xb80000 0xf480000>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts b/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts
new file mode 100644
index 0000000..9e317a4
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+/include/ "picoxcell-pc3x3.dtsi"
+/ {
+ model = "Picochip PC7302 (PC3X3)";
+ compatible = "picochip,pc7302-pc3x3", "picochip,pc3x3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+
+ chosen {
+ linux,stdout-path = &uart0;
+ };
+
+ clocks {
+ ref_clk: clock@10 {
+ compatible = "fixed-clock";
+ clock-outputs = "ref";
+ clock-frequency = <20000000>;
+ };
+
+ clkgate: clkgate@800a0048 {
+ clock@4 {
+ picochip,clk-no-disable;
+ };
+ };
+ };
+
+ rwid-axi {
+ ebi@50000000 {
+ nand: gpio-nand@2,0 {
+ compatible = "gpio-control-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <2 0x0000 0x1000>;
+ bus-clock = <&ebi_clk>, "bus";
+ gpio-control-nand,io-sync-reg =
+ <0x00000000 0x80220000>;
+
+ gpios = <&banka 1 0 /* rdy */
+ &banka 2 0 /* nce */
+ &banka 3 0 /* ale */
+ &banka 4 0 /* cle */
+ 0 /* nwp */>;
+
+ boot@100000 {
+ label = "Boot";
+ reg = <0x100000 0x80000>;
+ };
+
+ redundant-boot@200000 {
+ label = "Redundant Boot";
+ reg = <0x200000 0x80000>;
+ };
+
+ boot-env@300000 {
+ label = "Boot Evironment";
+ reg = <0x300000 0x20000>;
+ };
+
+ redundant-boot-env@320000 {
+ label = "Redundant Boot Environment";
+ reg = <0x300000 0x20000>;
+ };
+
+ kernel@380000 {
+ label = "Kernel";
+ reg = <0x380000 0x800000>;
+ };
+
+ fs@b80000 {
+ label = "File System";
+ reg = <0xb80000 0xf480000>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts
new file mode 100644
index 0000000..d66e2c0
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9g20.dts
@@ -0,0 +1,30 @@
+/*
+ * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board
+ *
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9g20.dtsi"
+
+/ {
+ model = "Calao USB A9G20";
+ compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:128k(at91bootstrap),256k(barebox)ro,128k(bareboxenv),128k(bareboxenv2),4M(kernel),120M(rootfs),-(data) root=/dev/mtdblock5 rw rootfstype=ubifs";
+ };
+
+ memory@20000000 {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 9d77777..bf0e134 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -25,7 +25,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/err.h>
-#include <linux/export.h>
+#include <linux/module.h>
#include <linux/list.h>
#include <linux/smp.h>
#include <linux/cpu_pm.h>
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index a07b0e7..1cde34a 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -12,11 +12,11 @@
*/
#include <linux/device.h>
+#include <linux/gpio.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <asm/gpio.h>
#include <asm/hardware/scoop.h>
/* PCMCIA to Scoop linkage
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 7aa4262..197f81c 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -259,7 +259,6 @@
writel(0, base + VIC_INT_SELECT);
writel(0, base + VIC_INT_ENABLE);
writel(~0, base + VIC_INT_ENABLE_CLEAR);
- writel(0, base + VIC_IRQ_STATUS);
writel(0, base + VIC_ITCR);
writel(~0, base + VIC_INT_SOFT_CLEAR);
}
diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h
index 9f390ce..b5c9f5b 100644
--- a/arch/arm/include/asm/device.h
+++ b/arch/arm/include/asm/device.h
@@ -12,7 +12,12 @@
#endif
};
+struct omap_device;
+
struct pdev_archdata {
+#ifdef CONFIG_ARCH_OMAP
+ struct omap_device *od;
+#endif
};
#endif
diff --git a/arch/arm/include/asm/ecard.h b/arch/arm/include/asm/ecard.h
index 29f2610..eaea146 100644
--- a/arch/arm/include/asm/ecard.h
+++ b/arch/arm/include/asm/ecard.h
@@ -161,7 +161,6 @@
/* Private internal data */
const char *card_desc; /* Card description */
- CONST unsigned int podaddr; /* Base Linux address for card */
CONST loader_t loader; /* loader program */
u64 dma_mask;
};
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index 166a7a3..11ad0bf 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -4,4 +4,23 @@
/* not all ARM platforms necessarily support this API ... */
#include <mach/gpio.h>
+#ifndef __ARM_GPIOLIB_COMPLEX
+/* Note: this may rely upon the value of ARCH_NR_GPIOS set in mach/gpio.h */
+#include <asm-generic/gpio.h>
+
+/* The trivial gpiolib dispatchers */
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#endif
+
+/*
+ * Provide a default gpio_to_irq() which should satisfy every case.
+ * However, some platforms want to do this differently, so allow them
+ * to override it.
+ */
+#ifndef gpio_to_irq
+#define gpio_to_irq __gpio_to_irq
+#endif
+
#endif /* _ARCH_ARM_GPIO_H */
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 99a6ed7..1db1143 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -52,6 +52,8 @@
#define L2X0_LOCKDOWN_WAY_D_BASE 0x900
#define L2X0_LOCKDOWN_WAY_I_BASE 0x904
#define L2X0_LOCKDOWN_STRIDE 0x08
+#define L2X0_ADDR_FILTER_START 0xC00
+#define L2X0_ADDR_FILTER_END 0xC04
#define L2X0_TEST_OPERATION 0xF00
#define L2X0_LINE_DATA 0xF10
#define L2X0_LINE_TAG 0xF30
@@ -65,8 +67,23 @@
#define L2X0_CACHE_ID_PART_MASK (0xf << 6)
#define L2X0_CACHE_ID_PART_L210 (1 << 6)
#define L2X0_CACHE_ID_PART_L310 (3 << 6)
+#define L2X0_CACHE_ID_RTL_MASK 0x3f
+#define L2X0_CACHE_ID_RTL_R0P0 0x0
+#define L2X0_CACHE_ID_RTL_R1P0 0x2
+#define L2X0_CACHE_ID_RTL_R2P0 0x4
+#define L2X0_CACHE_ID_RTL_R3P0 0x5
+#define L2X0_CACHE_ID_RTL_R3P1 0x6
+#define L2X0_CACHE_ID_RTL_R3P2 0x8
#define L2X0_AUX_CTRL_MASK 0xc0000fff
+#define L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT 0
+#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK 0x7
+#define L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT 3
+#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK (0x7 << 3)
+#define L2X0_AUX_CTRL_TAG_LATENCY_SHIFT 6
+#define L2X0_AUX_CTRL_TAG_LATENCY_MASK (0x7 << 6)
+#define L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT 9
+#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK (0x7 << 9)
#define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT 16
#define L2X0_AUX_CTRL_WAY_SIZE_SHIFT 17
#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x7 << 17)
@@ -77,8 +94,40 @@
#define L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT 29
#define L2X0_AUX_CTRL_EARLY_BRESP_SHIFT 30
+#define L2X0_LATENCY_CTRL_SETUP_SHIFT 0
+#define L2X0_LATENCY_CTRL_RD_SHIFT 4
+#define L2X0_LATENCY_CTRL_WR_SHIFT 8
+
+#define L2X0_ADDR_FILTER_EN 1
+
#ifndef __ASSEMBLY__
extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask);
+#if defined(CONFIG_CACHE_L2X0) && defined(CONFIG_OF)
+extern int l2x0_of_init(__u32 aux_val, __u32 aux_mask);
+#else
+static inline int l2x0_of_init(__u32 aux_val, __u32 aux_mask)
+{
+ return -ENODEV;
+}
#endif
+struct l2x0_regs {
+ unsigned long phy_base;
+ unsigned long aux_ctrl;
+ /*
+ * Whether the following registers need to be saved/restored
+ * depends on platform
+ */
+ unsigned long tag_latency;
+ unsigned long data_latency;
+ unsigned long filter_start;
+ unsigned long filter_end;
+ unsigned long prefetch_ctrl;
+ unsigned long pwr_ctrl;
+};
+
+extern struct l2x0_regs l2x0_saved_regs;
+
+#endif /* __ASSEMBLY__ */
+
#endif
diff --git a/arch/arm/include/asm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h
index b69d972..9eda7dc 100644
--- a/arch/arm/include/asm/hardware/iop3xx-gpio.h
+++ b/arch/arm/include/asm/hardware/iop3xx-gpio.h
@@ -28,6 +28,8 @@
#include <mach/hardware.h>
#include <asm-generic/gpio.h>
+#define __ARM_GPIOLIB_COMPLEX
+
#define IOP3XX_N_GPIOS 8
static inline int gpio_get_value(unsigned gpio)
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index d66605d..ffb089d 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -110,6 +110,27 @@
#include <mach/io.h>
/*
+ * This is the limit of PC card/PCI/ISA IO space, which is by default
+ * 64K if we have PC card, PCI or ISA support. Otherwise, default to
+ * zero to prevent ISA/PCI drivers claiming IO space (and potentially
+ * oopsing.)
+ *
+ * Only set this larger if you really need inb() et.al. to operate over
+ * a larger address space. Note that SOC_COMMON ioremaps each sockets
+ * IO space area, and so inb() et.al. must be defined to operate as per
+ * readb() et.al. on such platforms.
+ */
+#ifndef IO_SPACE_LIMIT
+#if defined(CONFIG_PCMCIA_SOC_COMMON) || defined(CONFIG_PCMCIA_SOC_COMMON_MODULE)
+#define IO_SPACE_LIMIT ((resource_size_t)0xffffffff)
+#elif defined(CONFIG_PCI) || defined(CONFIG_ISA) || defined(CONFIG_PCCARD)
+#define IO_SPACE_LIMIT ((resource_size_t)0xffff)
+#else
+#define IO_SPACE_LIMIT ((resource_size_t)0)
+#endif
+#endif
+
+/*
* IO port access primitives
* -------------------------
*
diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h
index f5e1cec..c6a1842 100644
--- a/arch/arm/include/asm/localtimer.h
+++ b/arch/arm/include/asm/localtimer.h
@@ -10,6 +10,7 @@
#ifndef __ASM_ARM_LOCALTIMER_H
#define __ASM_ARM_LOCALTIMER_H
+#include <linux/errno.h>
#include <linux/interrupt.h>
struct clock_event_device;
diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h
index d838743..53426c6 100644
--- a/arch/arm/include/asm/outercache.h
+++ b/arch/arm/include/asm/outercache.h
@@ -34,6 +34,7 @@
void (*sync)(void);
#endif
void (*set_debug)(unsigned long);
+ void (*resume)(void);
};
#ifdef CONFIG_OUTER_CACHE
@@ -74,6 +75,12 @@
outer_cache.disable();
}
+static inline void outer_resume(void)
+{
+ if (outer_cache.resume)
+ outer_cache.resume();
+}
+
#else
static inline void outer_inv_range(phys_addr_t start, phys_addr_t end)
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 16baba2..1429d89 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -20,6 +20,7 @@
#include <asm/thread_info.h>
#include <asm/memory.h>
#include <asm/procinfo.h>
+#include <asm/hardware/cache-l2x0.h>
#include <linux/kbuild.h>
/*
@@ -92,6 +93,17 @@
DEFINE(S_OLD_R0, offsetof(struct pt_regs, ARM_ORIG_r0));
DEFINE(S_FRAME_SIZE, sizeof(struct pt_regs));
BLANK();
+#ifdef CONFIG_CACHE_L2X0
+ DEFINE(L2X0_R_PHY_BASE, offsetof(struct l2x0_regs, phy_base));
+ DEFINE(L2X0_R_AUX_CTRL, offsetof(struct l2x0_regs, aux_ctrl));
+ DEFINE(L2X0_R_TAG_LATENCY, offsetof(struct l2x0_regs, tag_latency));
+ DEFINE(L2X0_R_DATA_LATENCY, offsetof(struct l2x0_regs, data_latency));
+ DEFINE(L2X0_R_FILTER_START, offsetof(struct l2x0_regs, filter_start));
+ DEFINE(L2X0_R_FILTER_END, offsetof(struct l2x0_regs, filter_end));
+ DEFINE(L2X0_R_PREFETCH_CTRL, offsetof(struct l2x0_regs, prefetch_ctrl));
+ DEFINE(L2X0_R_PWR_CTRL, offsetof(struct l2x0_regs, pwr_ctrl));
+ BLANK();
+#endif
#ifdef CONFIG_CPU_HAS_ASID
DEFINE(MM_CONTEXT_ID, offsetof(struct mm_struct, context.id));
BLANK();
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index d165001..4dd0eda 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -237,7 +237,7 @@
memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (IO_SIZE / PGDIR_SIZE));
- src_pgd = pgd_offset(mm, EASI_BASE);
+ src_pgd = pgd_offset(mm, (unsigned long)EASI_BASE);
dst_pgd = pgd_offset(mm, EASI_START);
memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE));
@@ -674,44 +674,37 @@
#define ecard_probeirqhw() (0)
#endif
-#ifndef IO_EC_MEMC8_BASE
-#define IO_EC_MEMC8_BASE 0
-#endif
-
-static unsigned int __ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed)
+static void __iomem *__ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed)
{
- unsigned long address = 0;
+ void __iomem *address = NULL;
int slot = ec->slot_no;
if (ec->slot_no == 8)
- return IO_EC_MEMC8_BASE;
+ return ECARD_MEMC8_BASE;
ectcr &= ~(1 << slot);
switch (type) {
case ECARD_MEMC:
if (slot < 4)
- address = IO_EC_MEMC_BASE + (slot << 12);
+ address = ECARD_MEMC_BASE + (slot << 14);
break;
case ECARD_IOC:
if (slot < 4)
- address = IO_EC_IOC_BASE + (slot << 12);
-#ifdef IO_EC_IOC4_BASE
+ address = ECARD_IOC_BASE + (slot << 14);
else
- address = IO_EC_IOC4_BASE + ((slot - 4) << 12);
-#endif
+ address = ECARD_IOC4_BASE + ((slot - 4) << 14);
if (address)
- address += speed << 17;
+ address += speed << 19;
break;
-#ifdef IO_EC_EASI_BASE
case ECARD_EASI:
- address = IO_EC_EASI_BASE + (slot << 22);
+ address = ECARD_EASI_BASE + (slot << 24);
if (speed == ECARD_FAST)
ectcr |= 1 << slot;
break;
-#endif
+
default:
break;
}
@@ -990,6 +983,7 @@
ecard_t **ecp;
ecard_t *ec;
struct ex_ecid cid;
+ void __iomem *addr;
int i, rc;
ec = ecard_alloc_card(type, slot);
@@ -999,7 +993,7 @@
}
rc = -ENODEV;
- if ((ec->podaddr = __ecard_address(ec, type, ECARD_SYNC)) == 0)
+ if ((addr = __ecard_address(ec, type, ECARD_SYNC)) == NULL)
goto nodev;
cid.r_zero = 1;
@@ -1019,7 +1013,7 @@
ec->cid.fiqmask = cid.r_fiqmask;
ec->cid.fiqoff = ecard_gets24(cid.r_fiqoff);
ec->fiqaddr =
- ec->irqaddr = (void __iomem *)ioaddr(ec->podaddr);
+ ec->irqaddr = addr;
if (ec->cid.is) {
ec->irqmask = ec->cid.irqmask;
@@ -1048,10 +1042,8 @@
set_irq_flags(ec->irq, IRQF_VALID);
}
-#ifdef IO_EC_MEMC8_BASE
if (slot == 8)
ec->irq = 11;
-#endif
#ifdef CONFIG_ARCH_RPC
/* On RiscPC, only first two slots have DMA capability */
if (slot < 2)
@@ -1097,9 +1089,7 @@
ecard_probe(slot, ECARD_IOC);
}
-#ifdef IO_EC_MEMC8_BASE
ecard_probe(8, ECARD_IOC);
-#endif
irqhw = ecard_probeirqhw();
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 98b7573..1ef6d00 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -324,8 +324,8 @@
[PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
[PERF_COUNT_HW_INSTRUCTIONS] =
ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE,
- [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_COHERENT_LINE_HIT,
- [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_COHERENT_LINE_MISS,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_DCACHE_ACCESS,
+ [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_DCACHE_REFILL,
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
[PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
[PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES,
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 2248467..4b59d96 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -442,6 +442,17 @@
# ----------------------------------------------------------
+comment "Generic Board Type"
+
+config MACH_AT91SAM_DT
+ bool "Atmel AT91SAM Evaluation Kits with device-tree support"
+ select USE_OF
+ help
+ Select this if you want to experiment device-tree with
+ an Atmel Evaluation Kit.
+
+# ----------------------------------------------------------
+
comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index bf57e8b..3ff245e 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -74,6 +74,9 @@
# AT91SAM9G45 board-specific support
obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
+# AT91SAM board with device-tree
+obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o
+
# AT91CAP9 board-specific support
obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 3462b81..08c665a 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -16,3 +16,5 @@
params_phys-y := 0x20000100
initrd_phys-y := 0x20410000
endif
+
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb usb_a9g20.dtb
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index dba0d8d..f87f504 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -16,6 +16,7 @@
#include <asm/mach/irq.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -23,7 +24,6 @@
#include <mach/board.h>
#include <mach/cpu.h>
-#include <mach/gpio.h>
#include <mach/at91cap9.h>
#include <mach/at91cap9_matrix.h>
#include <mach/at91sam9_smc.h>
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 7227755..978be95 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -14,11 +14,11 @@
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91rm9200.h>
#include <mach/at91rm9200_mc.h>
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index cb397be..f4518b4 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -199,6 +199,14 @@
CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk),
CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
+ /* more usart lookup table for DT entries */
+ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
+ CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffb4000.serial", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffb8000.serial", &usart2_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffd0000.serial", &usart3_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffd4000.serial", &usart4_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 39f81f4..a53b3de 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -13,11 +13,11 @@
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/cpu.h>
#include <mach/at91sam9260.h>
#include <mach/at91sam9260_matrix.h>
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 0f91792..4e647b6 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -14,6 +14,7 @@
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -21,7 +22,6 @@
#include <video/atmel_lcdc.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9261.h>
#include <mach/at91sam9261_matrix.h>
#include <mach/at91sam9_smc.h>
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index a050f41..dd7662b 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -13,6 +13,7 @@
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -20,7 +21,6 @@
#include <video/atmel_lcdc.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9263.h>
#include <mach/at91sam9263_matrix.h>
#include <mach/at91sam9_smc.h>
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 1532b50..0fe1c30 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -216,6 +216,12 @@
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+ /* more usart lookup table for DT entries */
+ CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
+ CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
+ CLKDEV_CON_DEV_ID("usart", "fff98000.serial", &usart3_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 600bffb..c3dfb1b 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -13,6 +13,7 @@
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <linux/atmel-mci.h>
@@ -21,7 +22,6 @@
#include <video/atmel_lcdc.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9g45.h>
#include <mach/at91sam9g45_matrix.h>
#include <mach/at91sam9_smc.h>
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index aacb19d..305a851 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -10,6 +10,7 @@
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -17,7 +18,6 @@
#include <video/atmel_lcdc.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9rl.h>
#include <mach/at91sam9rl_matrix.h>
#include <mach/at91sam9_smc.h>
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 5aa5885..367d5cd 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -19,6 +19,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -34,7 +35,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/cpu.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index b0c796d..0487ea1 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -25,6 +25,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -43,7 +44,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index d1abd58..747b2ea 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -21,6 +21,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -38,7 +39,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include "sam9_smc.h"
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 679b0b7..0626703 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -22,6 +22,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -41,7 +42,6 @@
#include <asm/mach/map.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91cap9_matrix.h>
#include <mach/at91sam9_smc.h>
#include <mach/system_rev.h>
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index c578c5d..774c87f 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -20,6 +20,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -35,7 +36,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index f4da8a1..fc885a4 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -21,6 +21,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -40,7 +41,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91sam9260_matrix.h>
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index 2d919f5..d35e65b 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -19,6 +19,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -36,7 +37,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91rm9200_mc.h>
#include <mach/cpu.h>
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 17654d5..c393666 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -19,6 +19,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -38,7 +39,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index 72b5567..586100e 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -20,6 +20,7 @@
#include <linux/types.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
@@ -35,7 +36,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
new file mode 100644
index 0000000..0b7d327
--- /dev/null
+++ b/arch/arm/mach-at91/board-dt.c
@@ -0,0 +1,123 @@
+/*
+ * Setup code for AT91SAM Evaluation Kits with Device Tree support
+ *
+ * Covers: * AT91SAM9G45-EKES board
+ * * AT91SAM9M10-EKES board
+ * * AT91SAM9M10G45-EK board
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/system_rev.h>
+#include <mach/at91sam9_smc.h>
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init ek_init_early(void)
+{
+ /* Initialize processor: 12.000 MHz crystal */
+ at91_initialize(12000000);
+
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+/* det_pin is not connected */
+static struct atmel_nand_data __initdata ek_nand_data = {
+ .ale = 21,
+ .cle = 22,
+ .rdy_pin = AT91_PIN_PC8,
+ .enable_pin = AT91_PIN_PC14,
+};
+
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 2,
+ .ncs_write_setup = 0,
+ .nwe_setup = 2,
+
+ .ncs_read_pulse = 4,
+ .nrd_pulse = 4,
+ .ncs_write_pulse = 4,
+ .nwe_pulse = 4,
+
+ .read_cycle = 7,
+ .write_cycle = 7,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+ .tdf_cycles = 3,
+};
+
+static void __init ek_add_device_nand(void)
+{
+ ek_nand_data.bus_width_16 = board_have_nand_16bit();
+ /* setup bus-width (8 or 16) */
+ if (ek_nand_data.bus_width_16)
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+ else
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &ek_nand_smc_config);
+
+ at91_add_device_nand(&ek_nand_data);
+}
+
+static const struct of_device_id aic_of_match[] __initconst = {
+ { .compatible = "atmel,at91rm9200-aic", },
+ {},
+};
+
+static void __init at91_dt_init_irq(void)
+{
+ irq_domain_generate_simple(aic_of_match, 0xfffff000, 0);
+ at91_init_irq_default();
+}
+
+static void __init at91_dt_device_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+ /* NAND */
+ ek_add_device_nand();
+}
+
+static const char *at91_dt_board_compat[] __initdata = {
+ "atmel,at91sam9m10g45ek",
+ "calao,usb-a9g20",
+ NULL
+};
+
+DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
+ /* Maintainer: Atmel */
+ .timer = &at91sam926x_timer,
+ .map_io = at91_map_io,
+ .init_early = ek_init_early,
+ .init_irq = at91_dt_init_irq,
+ .init_machine = at91_dt_device_init,
+ .dt_compat = at91_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 01170a2..45db7a3 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -20,6 +20,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -35,7 +36,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 7c0313c..2f9c16d2 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -20,6 +20,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -37,7 +38,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/cpu.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 4a17089..3bae73e 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -19,6 +19,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -34,7 +35,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/cpu.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 9dc8d49..15a3f1a 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -20,6 +20,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -35,7 +36,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/cpu.h>
#include <mach/at91rm9200_mc.h>
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 9bc6ab3..6094496 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -21,6 +21,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -44,7 +45,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include "sam9_smc.h"
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index b7b8390..0a8fe6a 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -20,6 +20,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -37,7 +38,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91rm9200_mc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 81f9110..938cc39 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -21,6 +21,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -40,7 +41,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 6f08faa..b4ac30e 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -22,6 +22,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -39,7 +40,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91rm9200_mc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 85bcccd..99fd7f8 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -22,6 +22,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -39,7 +40,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91rm9200_mc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 4d3a02f..2a21e79 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -21,6 +21,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -37,7 +38,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include "sam9_smc.h"
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 8a50c3e..89c8b57 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -20,6 +20,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -41,7 +42,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 5096a0e..3741f43 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -20,6 +20,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -45,7 +46,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index ea8f185..a580dd4 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -20,6 +20,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -44,7 +45,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 817f59d..8d77c2f 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -18,6 +18,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -41,7 +42,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/system_rev.h>
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index ad234cc..2d6203a 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -14,6 +14,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -38,7 +39,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 4f14b54..39a28ef 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -8,6 +8,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -30,7 +31,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
index 8c4c1a0..bac9b65 100644
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ b/arch/arm/mach-at91/board-usb-a9260.c
@@ -21,6 +21,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -40,7 +41,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
index 25e7937..5bd7357 100644
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -21,6 +21,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -39,7 +40,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 95edcbd..3c288b3 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -22,6 +22,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -43,7 +44,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91rm9200_mc.h>
#include <mach/cpu.h>
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 4615528..224e9e2 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -11,6 +11,7 @@
#include <linux/clk.h>
#include <linux/errno.h>
+#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/debugfs.h>
@@ -22,9 +23,6 @@
#include <mach/hardware.h>
#include <mach/at91_pio.h>
-#include <mach/gpio.h>
-
-#include <asm/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index 056dc66..2b9a1f5 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -214,11 +214,6 @@
*/
#include <asm/errno.h>
-#include <asm-generic/gpio.h> /* cansleep wrappers */
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
#define gpio_to_irq(gpio) (gpio)
#define irq_to_gpio(irq) (irq)
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index 0415a839..8dfafe7 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -9,13 +9,13 @@
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <mach/board.h>
-#include <mach/gpio.h>
/* ------------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 4159eca..7046158 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -10,6 +10,7 @@
* (at your option) any later version.
*/
+#include <linux/gpio.h>
#include <linux/suspend.h>
#include <linux/sched.h>
#include <linux/proc_fs.h>
@@ -25,7 +26,6 @@
#include <asm/mach/irq.h>
#include <mach/at91_pmc.h>
-#include <mach/gpio.h>
#include <mach/cpu.h>
#include "generic.h"
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 0b87a1c..495e313 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -5,7 +5,7 @@
# Common objects
obj-y := time.o clock.o serial.o io.o psc.o \
- gpio.o dma.o usb.o common.o sram.o aemif.o
+ dma.o usb.o common.o sram.o aemif.o
obj-$(CONFIG_DAVINCI_MUX) += mux.o
@@ -17,7 +17,6 @@
obj-$(CONFIG_ARCH_DAVINCI_DA830) += da830.o devices-da8xx.o
obj-$(CONFIG_ARCH_DAVINCI_DA850) += da850.o devices-da8xx.o
obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += tnetv107x.o devices-tnetv107x.o
-obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += gpio-tnetv107x.o
obj-$(CONFIG_AINTC) += irq.o
obj-$(CONFIG_CP_INTC) += cp_intc.o
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 2ed2f82..a6bf5dc 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -8,6 +8,7 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/clk.h>
@@ -19,7 +20,7 @@
#include <mach/common.h>
#include <mach/time.h>
#include <mach/da8xx.h>
-#include <mach/gpio.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 935dbed..4aae015 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -11,6 +11,7 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
@@ -27,7 +28,7 @@
#include <mach/da8xx.h>
#include <mach/cpufreq.h>
#include <mach/pm.h>
-#include <mach/gpio.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index a3a94e9..c143f43 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -13,7 +13,6 @@
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
#include <linux/spi/spi.h>
@@ -30,6 +29,7 @@
#include <mach/common.h>
#include <mach/asp.h>
#include <mach/spi.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 4604e72..679e168 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -17,7 +17,6 @@
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <asm/mach/map.h>
@@ -34,7 +33,7 @@
#include <mach/asp.h>
#include <mach/keyscan.h>
#include <mach/spi.h>
-
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 4c82c27..9a27466 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -12,7 +12,6 @@
#include <linux/clk.h>
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
#include <asm/mach/map.h>
@@ -26,6 +25,7 @@
#include <mach/serial.h>
#include <mach/common.h>
#include <mach/asp.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 1802e71..03e5f49 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -13,7 +13,6 @@
#include <linux/clk.h>
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
#include <asm/mach/map.h>
@@ -27,6 +26,7 @@
#include <mach/serial.h>
#include <mach/common.h>
#include <mach/asp.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
diff --git a/arch/arm/mach-davinci/include/mach/gpio-davinci.h b/arch/arm/mach-davinci/include/mach/gpio-davinci.h
new file mode 100644
index 0000000..1fdd1fd
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/gpio-davinci.h
@@ -0,0 +1,91 @@
+/*
+ * TI DaVinci GPIO Support
+ *
+ * Copyright (c) 2006 David Brownell
+ * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DAVINCI_DAVINCI_GPIO_H
+#define __DAVINCI_DAVINCI_GPIO_H
+
+#include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include <asm-generic/gpio.h>
+
+#include <mach/irqs.h>
+#include <mach/common.h>
+
+#define DAVINCI_GPIO_BASE 0x01C67000
+
+enum davinci_gpio_type {
+ GPIO_TYPE_DAVINCI = 0,
+ GPIO_TYPE_TNETV107X,
+};
+
+/*
+ * basic gpio routines
+ *
+ * board-specific init should be done by arch/.../.../board-XXX.c (maybe
+ * initializing banks together) rather than boot loaders; kexec() won't
+ * go through boot loaders.
+ *
+ * the gpio clock will be turned on when gpios are used, and you may also
+ * need to pay attention to PINMUX registers to be sure those pins are
+ * used as gpios, not with other peripherals.
+ *
+ * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation,
+ * and maybe for later updates, code may write GPIO(N). These may be
+ * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip
+ * may not support all the GPIOs in that range.
+ *
+ * GPIOs can also be on external chips, numbered after the ones built-in
+ * to the DaVinci chip. For now, they won't be usable as IRQ sources.
+ */
+#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */
+
+/* Convert GPIO signal to GPIO pin number */
+#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio))
+
+struct davinci_gpio_controller {
+ struct gpio_chip chip;
+ int irq_base;
+ spinlock_t lock;
+ void __iomem *regs;
+ void __iomem *set_data;
+ void __iomem *clr_data;
+ void __iomem *in_data;
+};
+
+/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
+ * with constant parameters; or in outlined code they execute at runtime.
+ *
+ * You'd access the controller directly when reading or writing more than
+ * one gpio value at a time, and to support wired logic where the value
+ * being driven by the cpu need not match the value read back.
+ *
+ * These are NOT part of the cross-platform GPIO interface
+ */
+static inline struct davinci_gpio_controller *
+__gpio_to_controller(unsigned gpio)
+{
+ struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
+ int index = gpio / 32;
+
+ if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
+ return NULL;
+
+ return ctlrs + index;
+}
+
+static inline u32 __gpio_mask(unsigned gpio)
+{
+ return 1 << (gpio % 32);
+}
+
+#endif /* __DAVINCI_DAVINCI_GPIO_H */
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index fbece12..fbaae47 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -13,80 +13,10 @@
#ifndef __DAVINCI_GPIO_H
#define __DAVINCI_GPIO_H
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
#include <asm-generic/gpio.h>
-#include <mach/irqs.h>
-#include <mach/common.h>
-
-#define DAVINCI_GPIO_BASE 0x01C67000
-
-enum davinci_gpio_type {
- GPIO_TYPE_DAVINCI = 0,
- GPIO_TYPE_TNETV107X,
-};
-
-/*
- * basic gpio routines
- *
- * board-specific init should be done by arch/.../.../board-XXX.c (maybe
- * initializing banks together) rather than boot loaders; kexec() won't
- * go through boot loaders.
- *
- * the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX registers to be sure those pins are
- * used as gpios, not with other peripherals.
- *
- * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation,
- * and maybe for later updates, code may write GPIO(N). These may be
- * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip
- * may not support all the GPIOs in that range.
- *
- * GPIOs can also be on external chips, numbered after the ones built-in
- * to the DaVinci chip. For now, they won't be usable as IRQ sources.
- */
-#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */
-
-/* Convert GPIO signal to GPIO pin number */
-#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio))
-
-struct davinci_gpio_controller {
- struct gpio_chip chip;
- int irq_base;
- spinlock_t lock;
- void __iomem *regs;
- void __iomem *set_data;
- void __iomem *clr_data;
- void __iomem *in_data;
-};
-
-/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
- * with constant parameters; or in outlined code they execute at runtime.
- *
- * You'd access the controller directly when reading or writing more than
- * one gpio value at a time, and to support wired logic where the value
- * being driven by the cpu need not match the value read back.
- *
- * These are NOT part of the cross-platform GPIO interface
- */
-static inline struct davinci_gpio_controller *
-__gpio_to_controller(unsigned gpio)
-{
- struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
- int index = gpio / 32;
-
- if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
- return NULL;
-
- return ctlrs + index;
-}
-
-static inline u32 __gpio_mask(unsigned gpio)
-{
- return 1 << (gpio % 32);
-}
+/* The inline versions use the static inlines in the driver header */
+#include "gpio-davinci.h"
/*
* The get/set/clear functions will inline when called with constant
@@ -147,11 +77,6 @@
return __gpio_cansleep(gpio);
}
-static inline int gpio_to_irq(unsigned gpio)
-{
- return __gpio_to_irq(gpio);
-}
-
static inline int irq_to_gpio(unsigned irq)
{
/* don't support the reverse mapping */
diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c
index 1b28fdd..409bb86 100644
--- a/arch/arm/mach-davinci/tnetv107x.c
+++ b/arch/arm/mach-davinci/tnetv107x.c
@@ -12,6 +12,7 @@
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
@@ -27,9 +28,9 @@
#include <mach/psc.h>
#include <mach/cp_intc.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
#include <mach/hardware.h>
#include <mach/tnetv107x.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
diff --git a/arch/arm/mach-ebsa110/include/mach/io.h b/arch/arm/mach-ebsa110/include/mach/io.h
index f68daa63..44679db 100644
--- a/arch/arm/mach-ebsa110/include/mach/io.h
+++ b/arch/arm/mach-ebsa110/include/mach/io.h
@@ -13,8 +13,6 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#define IO_SPACE_LIMIT 0xffff
-
u8 __inb8(unsigned int port);
void __outb8(u8 val, unsigned int port);
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index c60f081..94c78bc 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -38,6 +38,7 @@
#include <mach/fb.h>
#include <mach/ep93xx_keypad.h>
#include <mach/ep93xx_spi.h>
+#include <mach/gpio-ep93xx.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 257175e..c63a5ec 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -37,6 +37,7 @@
#include <mach/hardware.h>
#include <mach/fb.h>
#include <mach/ep93xx_spi.h>
+#include <mach/gpio-ep93xx.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h
similarity index 87%
rename from arch/arm/mach-ep93xx/include/mach/gpio.h
rename to arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h
index c57152c..8aff2ea 100644
--- a/arch/arm/mach-ep93xx/include/mach/gpio.h
+++ b/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h
@@ -1,9 +1,7 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/gpio.h
- */
+/* Include file for the EP93XX GPIO controller machine specifics */
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
+#ifndef __GPIO_EP93XX_H
+#define __GPIO_EP93XX_H
/* GPIO port A. */
#define EP93XX_GPIO_LINE_A(x) ((x) + 0)
@@ -99,22 +97,4 @@
/* maximum value for irq capable line identifiers */
#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7)
-/* new generic GPIO API - see Documentation/gpio.txt */
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-
-/*
- * Map GPIO A0..A7 (0..7) to irq 64..71,
- * B0..B7 (7..15) to irq 72..79, and
- * F0..F7 (16..24) to irq 80..87.
- */
-#define gpio_to_irq(gpio) \
- (((gpio) <= EP93XX_GPIO_LINE_MAX_IRQ) ? (64 + (gpio)) : -EINVAL)
-
-#define irq_to_gpio(irq) ((irq) - gpio_to_irq(0))
-
-#endif
+#endif /* __GPIO_EP93XX_H */
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 238bc60..d6f286b 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -18,12 +18,12 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <mach/hardware.h>
#include <mach/fb.h>
+#include <mach/gpio-ep93xx.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 3bdf3a2..2b4d4b0 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -20,7 +20,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
-#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <linux/fb.h>
@@ -30,6 +29,7 @@
#include <mach/hardware.h>
#include <mach/fb.h>
+#include <mach/gpio-ep93xx.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-exynos4/include/mach/gpio.h b/arch/arm/mach-exynos4/include/mach/gpio.h
index be9266b..80523ca 100644
--- a/arch/arm/mach-exynos4/include/mach/gpio.h
+++ b/arch/arm/mach-exynos4/include/mach/gpio.h
@@ -13,11 +13,6 @@
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H __FILE__
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
/* Practically, GPIO banks up to GPZ are the configurable gpio banks */
/* GPIO bank sizes */
@@ -151,6 +146,4 @@
#define ARCH_NR_GPIOS (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + \
CONFIG_SAMSUNG_GPIO_EXTRA + 1)
-#include <asm-generic/gpio.h>
-
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-footbridge/include/mach/io.h b/arch/arm/mach-footbridge/include/mach/io.h
index 32e4cc3..15a7039 100644
--- a/arch/arm/mach-footbridge/include/mach/io.h
+++ b/arch/arm/mach-footbridge/include/mach/io.h
@@ -23,8 +23,6 @@
#define PCIO_SIZE 0x00100000
#define PCIO_BASE MMU_IO(0xff000000, 0x7c000000)
-#define IO_SPACE_LIMIT 0xffff
-
/*
* Translation of various region addresses to virtual addresses
*/
diff --git a/arch/arm/mach-gemini/include/mach/gpio.h b/arch/arm/mach-gemini/include/mach/gpio.h
index 3bc2c70..40a0527 100644
--- a/arch/arm/mach-gemini/include/mach/gpio.h
+++ b/arch/arm/mach-gemini/include/mach/gpio.h
@@ -13,11 +13,6 @@
#define __MACH_GPIO_H__
#include <mach/irqs.h>
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
#define gpio_to_irq(x) ((x) + GPIO_IRQ_BASE)
#define irq_to_gpio(x) ((x) - GPIO_IRQ_BASE)
diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile
new file mode 100644
index 0000000..986958a
--- /dev/null
+++ b/arch/arm/mach-highbank/Makefile
@@ -0,0 +1,6 @@
+obj-y := clock.o highbank.o system.o
+obj-$(CONFIG_DEBUG_HIGHBANK_UART) += lluart.o
+obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+obj-$(CONFIG_PM_SLEEP) += pm.o
diff --git a/arch/arm/mach-highbank/Makefile.boot b/arch/arm/mach-highbank/Makefile.boot
new file mode 100644
index 0000000..dae9661
--- /dev/null
+++ b/arch/arm/mach-highbank/Makefile.boot
@@ -0,0 +1 @@
+zreladdr-y := 0x00008000
diff --git a/arch/arm/mach-highbank/clock.c b/arch/arm/mach-highbank/clock.c
new file mode 100644
index 0000000..c25a2ae
--- /dev/null
+++ b/arch/arm/mach-highbank/clock.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+
+struct clk {
+ unsigned long rate;
+};
+
+int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+
+void clk_disable(struct clk *clk)
+{}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ return clk->rate;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ return 0;
+}
+
+static struct clk eclk = { .rate = 200000000 };
+static struct clk pclk = { .rate = 150000000 };
+
+static struct clk_lookup lookups[] = {
+ { .clk = &pclk, .con_id = "apb_pclk", },
+ { .clk = &pclk, .dev_id = "sp804", },
+ { .clk = &eclk, .dev_id = "ffe0e000.sdhci", },
+ { .clk = &pclk, .dev_id = "fff36000.serial", },
+};
+
+void __init highbank_clocks_init(void)
+{
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+}
diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h
new file mode 100644
index 0000000..7e33fc9
--- /dev/null
+++ b/arch/arm/mach-highbank/core.h
@@ -0,0 +1,9 @@
+extern void highbank_set_cpu_jump(int cpu, void *jump_addr);
+extern void highbank_clocks_init(void);
+extern void __iomem *scu_base_addr;
+#ifdef CONFIG_DEBUG_HIGHBANK_UART
+extern void highbank_lluart_map_io(void);
+#else
+static inline void highbank_lluart_map_io(void) {}
+#endif
+
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
new file mode 100644
index 0000000..b82dcf0
--- /dev/null
+++ b/arch/arm/mach-highbank/highbank.c
@@ -0,0 +1,145 @@
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+
+#include <asm/cacheflush.h>
+#include <asm/unified.h>
+#include <asm/smp_scu.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/hardware/timer-sp.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <mach/irqs.h>
+
+#include "core.h"
+#include "sysregs.h"
+
+void __iomem *sregs_base;
+
+#define HB_SCU_VIRT_BASE 0xfee00000
+void __iomem *scu_base_addr = ((void __iomem *)(HB_SCU_VIRT_BASE));
+
+static struct map_desc scu_io_desc __initdata = {
+ .virtual = HB_SCU_VIRT_BASE,
+ .pfn = 0, /* run-time */
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+};
+
+static void __init highbank_scu_map_io(void)
+{
+ unsigned long base;
+
+ /* Get SCU base */
+ asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
+
+ scu_io_desc.pfn = __phys_to_pfn(base);
+ iotable_init(&scu_io_desc, 1);
+}
+
+static void __init highbank_map_io(void)
+{
+ highbank_scu_map_io();
+ highbank_lluart_map_io();
+}
+
+#define HB_JUMP_TABLE_PHYS(cpu) (0x40 + (0x10 * (cpu)))
+#define HB_JUMP_TABLE_VIRT(cpu) phys_to_virt(HB_JUMP_TABLE_PHYS(cpu))
+
+void highbank_set_cpu_jump(int cpu, void *jump_addr)
+{
+ writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu));
+ __cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
+ outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
+ HB_JUMP_TABLE_PHYS(cpu) + 15);
+}
+
+const static struct of_device_id irq_match[] = {
+ { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+ {}
+};
+
+static void __init highbank_init_irq(void)
+{
+ of_irq_init(irq_match);
+ l2x0_of_init(0, ~0UL);
+}
+
+static void __init highbank_timer_init(void)
+{
+ int irq;
+ struct device_node *np;
+ void __iomem *timer_base;
+
+ /* Map system registers */
+ np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
+ sregs_base = of_iomap(np, 0);
+ WARN_ON(!sregs_base);
+
+ np = of_find_compatible_node(NULL, NULL, "arm,sp804");
+ timer_base = of_iomap(np, 0);
+ WARN_ON(!timer_base);
+ irq = irq_of_parse_and_map(np, 0);
+
+ highbank_clocks_init();
+
+ sp804_clocksource_init(timer_base + 0x20, "timer1");
+ sp804_clockevents_init(timer_base, irq, "timer0");
+}
+
+static struct sys_timer highbank_timer = {
+ .init = highbank_timer_init,
+};
+
+static void highbank_power_off(void)
+{
+ hignbank_set_pwr_shutdown();
+ scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
+
+ while (1)
+ cpu_do_idle();
+}
+
+static void __init highbank_init(void)
+{
+ pm_power_off = highbank_power_off;
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *highbank_match[] __initconst = {
+ "calxeda,highbank",
+ NULL,
+};
+
+DT_MACHINE_START(HIGHBANK, "Highbank")
+ .map_io = highbank_map_io,
+ .init_irq = highbank_init_irq,
+ .timer = &highbank_timer,
+ .init_machine = highbank_init,
+ .dt_compat = highbank_match,
+MACHINE_END
diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-highbank/hotplug.c
new file mode 100644
index 0000000..977cebb
--- /dev/null
+++ b/arch/arm/mach-highbank/hotplug.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+
+#include <asm/smp_scu.h>
+#include <asm/cacheflush.h>
+
+#include "core.h"
+
+extern void secondary_startup(void);
+
+int platform_cpu_kill(unsigned int cpu)
+{
+ return 1;
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+ flush_cache_all();
+
+ highbank_set_cpu_jump(cpu, secondary_startup);
+ scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
+
+ cpu_do_idle();
+
+ /* We should never return from idle */
+ panic("highbank: cpu %d unexpectedly exit from shutdown\n", cpu);
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+ /*
+ * CPU0 should not be shut down via hotplug. cpu_idle can WFI
+ * or a proper shutdown or hibernate should be used.
+ */
+ return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-highbank/include/mach/debug-macro.S b/arch/arm/mach-highbank/include/mach/debug-macro.S
new file mode 100644
index 0000000..cb57fe5
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/debug-macro.S
@@ -0,0 +1,19 @@
+/*
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+ .macro addruart,rp,rv,tmp
+ movw \rv, #0x6000
+ movt \rv, #0xfee3
+ movw \rp, #0x6000
+ movt \rp, #0xfff3
+ .endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-highbank/include/mach/entry-macro.S b/arch/arm/mach-highbank/include/mach/entry-macro.S
new file mode 100644
index 0000000..73c1129
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/entry-macro.S
@@ -0,0 +1,7 @@
+#include <asm/hardware/entry-macro-gic.S>
+
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
diff --git a/arch/arm/mach-highbank/include/mach/gpio.h b/arch/arm/mach-highbank/include/mach/gpio.h
new file mode 100644
index 0000000..40a8c17
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/gpio.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-highbank/include/mach/io.h b/arch/arm/mach-highbank/include/mach/io.h
new file mode 100644
index 0000000..70cfa3b
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/io.h
@@ -0,0 +1,7 @@
+#ifndef __MACH_IO_H
+#define __MACH_IO_H
+
+#define __io(a) ({ (void)(a); __typesafe_io(0); })
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-highbank/include/mach/irqs.h b/arch/arm/mach-highbank/include/mach/irqs.h
new file mode 100644
index 0000000..9746aab
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/irqs.h
@@ -0,0 +1,6 @@
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define NR_IRQS 192
+
+#endif
diff --git a/arch/arm/mach-highbank/include/mach/memory.h b/arch/arm/mach-highbank/include/mach/memory.h
new file mode 100644
index 0000000..40a8c17
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/memory.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-highbank/include/mach/system.h b/arch/arm/mach-highbank/include/mach/system.h
new file mode 100644
index 0000000..7e81922
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/system.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __MACH_SYSTEM_H
+#define __MACH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+extern void arch_reset(char mode, const char *cmd);
+
+#endif
diff --git a/arch/arm/mach-highbank/include/mach/timex.h b/arch/arm/mach-highbank/include/mach/timex.h
new file mode 100644
index 0000000..88dac7a
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/timex.h
@@ -0,0 +1,6 @@
+#ifndef __MACH_TIMEX_H
+#define __MACH_TIMEX_H
+
+#define CLOCK_TICK_RATE 1000000
+
+#endif
diff --git a/arch/arm/mach-highbank/include/mach/uncompress.h b/arch/arm/mach-highbank/include/mach/uncompress.h
new file mode 100644
index 0000000..bbe20e6
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/uncompress.h
@@ -0,0 +1,9 @@
+#ifndef __MACH_UNCOMPRESS_H
+#define __MACH_UNCOMPRESS_H
+
+#define putc(c)
+#define flush()
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-highbank/include/mach/vmalloc.h b/arch/arm/mach-highbank/include/mach/vmalloc.h
new file mode 100644
index 0000000..1969e95
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/vmalloc.h
@@ -0,0 +1 @@
+#define VMALLOC_END 0xFEE00000UL
diff --git a/arch/arm/mach-highbank/lluart.c b/arch/arm/mach-highbank/lluart.c
new file mode 100644
index 0000000..3715750
--- /dev/null
+++ b/arch/arm/mach-highbank/lluart.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/init.h>
+#include <asm/page.h>
+#include <asm/sizes.h>
+#include <asm/mach/map.h>
+
+#define HB_DEBUG_LL_PHYS_BASE 0xfff36000
+#define HB_DEBUG_LL_VIRT_BASE 0xfee36000
+
+static struct map_desc lluart_io_desc __initdata = {
+ .virtual = HB_DEBUG_LL_VIRT_BASE,
+ .pfn = __phys_to_pfn(HB_DEBUG_LL_PHYS_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+};
+
+void __init highbank_lluart_map_io(void)
+{
+ iotable_init(&lluart_io_desc, 1);
+}
diff --git a/arch/arm/mach-highbank/localtimer.c b/arch/arm/mach-highbank/localtimer.c
new file mode 100644
index 0000000..5a00e79
--- /dev/null
+++ b/arch/arm/mach-highbank/localtimer.c
@@ -0,0 +1,40 @@
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ * Based on localtimer.c, Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/init.h>
+#include <linux/clockchips.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <asm/smp_twd.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+int __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "arm,smp-twd");
+ if (!twd_base) {
+ twd_base = of_iomap(np, 0);
+ WARN_ON(!twd_base);
+ }
+ evt->irq = irq_of_parse_and_map(np, 0);
+ twd_timer_setup(evt);
+ return 0;
+}
diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c
new file mode 100644
index 0000000..d01364c
--- /dev/null
+++ b/arch/arm/mach-highbank/platsmp.c
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ * Based on platsmp.c, Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/smp_scu.h>
+#include <asm/hardware/gic.h>
+
+#include "core.h"
+
+extern void secondary_startup(void);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+ gic_secondary_init(0);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ gic_raise_softirq(cpumask_of(cpu), 0);
+ return 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+ unsigned int i, ncores;
+
+ ncores = scu_get_core_count(scu_base_addr);
+
+ /* sanity check */
+ if (ncores > NR_CPUS) {
+ printk(KERN_WARNING
+ "highbank: no. of cores (%d) greater than configured "
+ "maximum of %d - clipping\n",
+ ncores, NR_CPUS);
+ ncores = NR_CPUS;
+ }
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
+}
+
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+ int i;
+
+ scu_enable(scu_base_addr);
+
+ /*
+ * Write the address of secondary startup into the jump table
+ * The cores are in wfi and wait until they receive a soft interrupt
+ * and a non-zero value to jump to. Then the secondary CPU branches
+ * to this address.
+ */
+ for (i = 1; i < max_cpus; i++)
+ highbank_set_cpu_jump(i, secondary_startup);
+}
diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c
new file mode 100644
index 0000000..33b3beb
--- /dev/null
+++ b/arch/arm/mach-highbank/pm.c
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/suspend.h>
+
+#include <asm/proc-fns.h>
+#include <asm/smp_scu.h>
+#include <asm/suspend.h>
+
+#include "core.h"
+#include "sysregs.h"
+
+static int highbank_suspend_finish(unsigned long val)
+{
+ cpu_do_idle();
+ return 0;
+}
+
+static int highbank_pm_enter(suspend_state_t state)
+{
+ hignbank_set_pwr_suspend();
+ highbank_set_cpu_jump(0, cpu_resume);
+
+ scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
+ cpu_suspend(0, highbank_suspend_finish);
+
+ return 0;
+}
+
+static const struct platform_suspend_ops highbank_pm_ops = {
+ .enter = highbank_pm_enter,
+ .valid = suspend_valid_only_mem,
+};
+
+static int __init highbank_pm_init(void)
+{
+ suspend_set_ops(&highbank_pm_ops);
+ return 0;
+}
+module_init(highbank_pm_init);
diff --git a/arch/arm/mach-highbank/sysregs.h b/arch/arm/mach-highbank/sysregs.h
new file mode 100644
index 0000000..0e91338
--- /dev/null
+++ b/arch/arm/mach-highbank/sysregs.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _MACH_HIGHBANK__SYSREGS_H_
+#define _MACH_HIGHBANK__SYSREGS_H_
+
+#include <linux/io.h>
+
+extern void __iomem *sregs_base;
+
+#define HB_SREG_A9_PWR_REQ 0xf00
+#define HB_SREG_A9_BOOT_STAT 0xf04
+#define HB_SREG_A9_BOOT_DATA 0xf08
+
+#define HB_PWR_SUSPEND 0
+#define HB_PWR_SOFT_RESET 1
+#define HB_PWR_HARD_RESET 2
+#define HB_PWR_SHUTDOWN 3
+
+static inline void hignbank_set_pwr_suspend(void)
+{
+ writel(HB_PWR_SUSPEND, sregs_base + HB_SREG_A9_PWR_REQ);
+}
+
+static inline void hignbank_set_pwr_shutdown(void)
+{
+ writel(HB_PWR_SHUTDOWN, sregs_base + HB_SREG_A9_PWR_REQ);
+}
+
+static inline void hignbank_set_pwr_soft_reset(void)
+{
+ writel(HB_PWR_SOFT_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
+}
+
+static inline void hignbank_set_pwr_hard_reset(void)
+{
+ writel(HB_PWR_HARD_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
+}
+
+#endif
diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c
new file mode 100644
index 0000000..53f0c4c
--- /dev/null
+++ b/arch/arm/mach-highbank/system.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/io.h>
+#include <asm/smp_scu.h>
+#include <asm/proc-fns.h>
+
+#include "core.h"
+#include "sysregs.h"
+
+void arch_reset(char mode, const char *cmd)
+{
+ if (mode == 'h')
+ hignbank_set_pwr_hard_reset();
+ else
+ hignbank_set_pwr_soft_reset();
+
+ scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
+ cpu_do_idle();
+}
+
diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c
index cf8f809..82bd440 100644
--- a/arch/arm/mach-imx/iomux-imx31.c
+++ b/arch/arm/mach-imx/iomux-imx31.c
@@ -17,13 +17,12 @@
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
-
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <mach/hardware.h>
-#include <mach/gpio.h>
#include <mach/iomux-mx3.h>
/*
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index e75f391..74dd573 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -13,7 +13,7 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
-
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
@@ -27,7 +27,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <mach/iomux-mx27.h>
#include "devices-imx27.h"
diff --git a/arch/arm/mach-integrator/include/mach/io.h b/arch/arm/mach-integrator/include/mach/io.h
index f21bb54..37beed3 100644
--- a/arch/arm/mach-integrator/include/mach/io.h
+++ b/arch/arm/mach-integrator/include/mach/io.h
@@ -20,8 +20,6 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#define IO_SPACE_LIMIT 0xffff
-
/*
* WARNING: this has to mirror definitions in platform.h
*/
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index 4068166..59a5126 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -13,7 +13,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/spinlock.h>
@@ -39,7 +39,7 @@
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-#include <mach/gpio.h>
+#include <mach/gpio-ixp2000.h>
static DEFINE_SPINLOCK(ixp2000_slowport_lock);
static unsigned long ixp2000_slowport_irq_flags;
diff --git a/arch/arm/mach-ixp2000/include/mach/gpio.h b/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h
similarity index 95%
rename from arch/arm/mach-ixp2000/include/mach/gpio.h
rename to arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h
index 4a88d2c..af836c7 100644
--- a/arch/arm/mach-ixp2000/include/mach/gpio.h
+++ b/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h
@@ -3,7 +3,7 @@
*
* Copyright (C) 2002 Intel Corporation.
*
- * This program is free software, you can redistribute it and/or modify
+ * This program is free software, you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
@@ -11,7 +11,7 @@
/*
* IXP2000 GPIO in/out, edge/level detection for IRQs:
* IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High
- * or both Falling-edge and Rising-edge.
+ * or both Falling-edge and Rising-edge.
* This must be called *before* the corresponding IRQ is registerd.
* Use this instead of directly setting the GPIO registers.
* GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb)
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
index 235638f..634b6c8 100644
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -14,6 +14,7 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mm.h>
@@ -40,8 +41,7 @@
#include <asm/mach/flash.h>
#include <asm/mach/arch.h>
-#include <mach/gpio.h>
-
+#include <mach/gpio-ixp2000.h>
/*************************************************************************
* IXDP2x00 IRQ Initialization
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 71607a7..8837fbc 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -16,7 +16,7 @@
* Author: Rod Whitby <rod@whitby.id.au>
* Maintainers: http://www.nslu2-linux.org/
*/
-
+#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/jiffies.h>
#include <linux/timer.h>
@@ -31,7 +31,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/time.h>
-#include <asm/gpio.h>
#define DSMG600_SDA_PIN 5
#define DSMG600_SCL_PIN 4
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index a9540cd..2887c35 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -14,7 +14,7 @@
* Maintainers: http://www.nslu2-linux.org/
*
*/
-
+#include <linux/gpio.h>
#include <linux/if_ether.h>
#include <linux/irq.h>
#include <linux/serial.h>
@@ -27,7 +27,6 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
-#include <asm/gpio.h>
#define FSG_SDA_PIN 12
#define FSG_SCL_PIN 13
diff --git a/arch/arm/mach-ixp4xx/include/mach/gpio.h b/arch/arm/mach-ixp4xx/include/mach/gpio.h
index a5f87de..83d6b4e 100644
--- a/arch/arm/mach-ixp4xx/include/mach/gpio.h
+++ b/arch/arm/mach-ixp4xx/include/mach/gpio.h
@@ -28,6 +28,8 @@
#include <linux/kernel.h>
#include <mach/hardware.h>
+#define __ARM_GPIOLIB_COMPLEX
+
static inline int gpio_request(unsigned gpio, const char *label)
{
return 0;
@@ -70,6 +72,7 @@
#include <asm-generic/gpio.h> /* cansleep wrappers */
extern int gpio_to_irq(int gpio);
+#define gpio_to_irq gpio_to_irq
extern int irq_to_gpio(unsigned int irq);
#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
index 57b5410..ffb9d6a 100644
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -17,8 +17,6 @@
#include <mach/hardware.h>
-#define IO_SPACE_LIMIT 0x0000ffff
-
extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 9f46692..de716fa 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -17,7 +17,7 @@
* Maintainers: http://www.nslu2-linux.org/
*
*/
-
+#include <linux/gpio.h>
#include <linux/if_ether.h>
#include <linux/irq.h>
#include <linux/jiffies.h>
@@ -32,7 +32,6 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
-#include <asm/gpio.h>
#define NAS100D_SDA_PIN 5
#define NAS100D_SCL_PIN 6
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 3676fbf..ac81ccb 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -16,7 +16,7 @@
* Maintainers: http://www.nslu2-linux.org/
*
*/
-
+#include <linux/gpio.h>
#include <linux/if_ether.h>
#include <linux/irq.h>
#include <linux/serial.h>
@@ -30,7 +30,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/time.h>
-#include <asm/gpio.h>
#define NSLU2_SDA_PIN 7
#define NSLU2_SCL_PIN 6
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
index 05d193a..c4c68e5 100644
--- a/arch/arm/mach-kirkwood/irq.c
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -7,14 +7,13 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <mach/bridge-regs.h>
#include <plat/irq.h>
-#include <asm/gpio.h>
#include "common.h"
static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
index b0a7d97..cc431fa 100644
--- a/arch/arm/mach-kirkwood/mpp.c
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -7,12 +7,11 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
-#include <asm/gpio.h>
#include <mach/hardware.h>
#include <plat/mpp.h>
#include "common.h"
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
index 7e3e816..853efd9 100644
--- a/arch/arm/mach-ks8695/Makefile
+++ b/arch/arm/mach-ks8695/Makefile
@@ -3,7 +3,7 @@
# Makefile for KS8695 architecture support
#
-obj-y := cpu.o irq.o time.o gpio.o devices.o
+obj-y := cpu.o irq.o time.o devices.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index a5fcc7c..a91f99d 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -10,7 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
@@ -34,7 +34,7 @@
#include <asm/mach/irq.h>
#include <mach/devices.h>
-#include <mach/gpio.h>
+#include <mach/gpio-ks8695.h>
#include "generic.h"
diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c
index fb91a71..d24bcef 100644
--- a/arch/arm/mach-ks8695/board-dsm320.c
+++ b/arch/arm/mach-ks8695/board-dsm320.c
@@ -10,7 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
@@ -29,7 +29,7 @@
#include <asm/mach/irq.h>
#include <mach/devices.h>
-#include <mach/gpio.h>
+#include <mach/gpio-ks8695.h>
#include "generic.h"
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index 8f67a75..16c9565 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -5,7 +5,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
@@ -18,7 +18,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/gpio.h>
+#include <mach/gpio-ks8695.h>
#include <mach/devices.h>
#include "generic.h"
diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
index b89fb6d..73bd638 100644
--- a/arch/arm/mach-ks8695/devices.c
+++ b/arch/arm/mach-ks8695/devices.c
@@ -20,6 +20,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <mach/irqs.h>
diff --git a/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h b/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h
new file mode 100644
index 0000000..6eb034d
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_KS8659_GPIO_H
+#define __MACH_KS8659_GPIO_H
+
+#include <linux/kernel.h>
+
+#define KS8695_GPIO_0 0
+#define KS8695_GPIO_1 1
+#define KS8695_GPIO_2 2
+#define KS8695_GPIO_3 3
+#define KS8695_GPIO_4 4
+#define KS8695_GPIO_5 5
+#define KS8695_GPIO_6 6
+#define KS8695_GPIO_7 7
+#define KS8695_GPIO_8 8
+#define KS8695_GPIO_9 9
+#define KS8695_GPIO_10 10
+#define KS8695_GPIO_11 11
+#define KS8695_GPIO_12 12
+#define KS8695_GPIO_13 13
+#define KS8695_GPIO_14 14
+#define KS8695_GPIO_15 15
+
+/*
+ * Configure GPIO pin as external interrupt source.
+ */
+extern int ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
+
+/* Register the GPIOs */
+extern void ks8695_register_gpios(void);
+
+#endif /* __MACH_KS8659_GPIO_H */
diff --git a/arch/arm/mach-ks8695/include/mach/gpio.h b/arch/arm/mach-ks8695/include/mach/gpio.h
index 86312d4..f5fda36 100644
--- a/arch/arm/mach-ks8695/include/mach/gpio.h
+++ b/arch/arm/mach-ks8695/include/mach/gpio.h
@@ -11,47 +11,9 @@
#ifndef __ASM_ARCH_GPIO_H_
#define __ASM_ARCH_GPIO_H_
-#include <linux/kernel.h>
-
-#define KS8695_GPIO_0 0
-#define KS8695_GPIO_1 1
-#define KS8695_GPIO_2 2
-#define KS8695_GPIO_3 3
-#define KS8695_GPIO_4 4
-#define KS8695_GPIO_5 5
-#define KS8695_GPIO_6 6
-#define KS8695_GPIO_7 7
-#define KS8695_GPIO_8 8
-#define KS8695_GPIO_9 9
-#define KS8695_GPIO_10 10
-#define KS8695_GPIO_11 11
-#define KS8695_GPIO_12 12
-#define KS8695_GPIO_13 13
-#define KS8695_GPIO_14 14
-#define KS8695_GPIO_15 15
-
-/*
- * Configure GPIO pin as external interrupt source.
- */
-extern int ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
-
/*
* Map IRQ number to GPIO line.
*/
extern int irq_to_gpio(unsigned int irq);
-#include <asm-generic/gpio.h>
-
-/* If it turns out that we need to optimise GPIO access for the
- * Micrel's GPIOs, then these can be changed to check their argument
- * directly as static inlines. However for now it's probably not
- * worthwhile.
- */
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_to_irq __gpio_to_irq
-
-/* Register the GPIOs */
-extern void ks8695_register_gpios(void);
-
#endif
diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c
index 184ef74..d6f6502 100644
--- a/arch/arm/mach-ks8695/leds.c
+++ b/arch/arm/mach-ks8695/leds.c
@@ -7,14 +7,14 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <asm/leds.h>
#include <mach/devices.h>
-#include <mach/gpio.h>
static inline void ks8695_led_on(unsigned int led)
diff --git a/arch/arm/mach-lpc32xx/Makefile b/arch/arm/mach-lpc32xx/Makefile
index a5fc5d0..f5db805 100644
--- a/arch/arm/mach-lpc32xx/Makefile
+++ b/arch/arm/mach-lpc32xx/Makefile
@@ -3,6 +3,6 @@
#
obj-y := timer.o irq.o common.o serial.o clock.o
-obj-y += gpiolib.o pm.o suspend.o
+obj-y += pm.o suspend.o
obj-y += phy3250.o
diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h b/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h
new file mode 100644
index 0000000..1816e22
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h
@@ -0,0 +1,50 @@
+/*
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_GPIO_LPC32XX_H
+#define __MACH_GPIO_LPC32XX_H
+
+/*
+ * Note!
+ * Muxed GP pins need to be setup to the GP state in the board level
+ * code prior to using this driver.
+ * GPI pins : 28xP3 group
+ * GPO pins : 24xP3 group
+ * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group
+ */
+
+#define LPC32XX_GPIO_P0_MAX 8
+#define LPC32XX_GPIO_P1_MAX 24
+#define LPC32XX_GPIO_P2_MAX 13
+#define LPC32XX_GPIO_P3_MAX 6
+#define LPC32XX_GPI_P3_MAX 28
+#define LPC32XX_GPO_P3_MAX 24
+
+#define LPC32XX_GPIO_P0_GRP 0
+#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX)
+#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX)
+#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX)
+#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX)
+#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX)
+
+/*
+ * A specific GPIO can be selected with this macro
+ * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
+ * See the LPC32x0 User's guide for GPIO group numbers
+ */
+#define LPC32XX_GPIO(x, y) ((x) + (y))
+
+#endif /* __MACH_GPIO_LPC32XX_H */
diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio.h b/arch/arm/mach-lpc32xx/include/mach/gpio.h
index 67d03da..e69de29 100644
--- a/arch/arm/mach-lpc32xx/include/mach/gpio.h
+++ b/arch/arm/mach-lpc32xx/include/mach/gpio.h
@@ -1,74 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/gpio.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-/*
- * Note!
- * Muxed GP pins need to be setup to the GP state in the board level
- * code prior to using this driver.
- * GPI pins : 28xP3 group
- * GPO pins : 24xP3 group
- * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group
- */
-
-#define LPC32XX_GPIO_P0_MAX 8
-#define LPC32XX_GPIO_P1_MAX 24
-#define LPC32XX_GPIO_P2_MAX 13
-#define LPC32XX_GPIO_P3_MAX 6
-#define LPC32XX_GPI_P3_MAX 28
-#define LPC32XX_GPO_P3_MAX 24
-
-#define LPC32XX_GPIO_P0_GRP 0
-#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX)
-#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX)
-#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX)
-#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX)
-#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX)
-
-/*
- * A specific GPIO can be selected with this macro
- * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
- * See the LPC32x0 User's guide for GPIO group numbers
- */
-#define LPC32XX_GPIO(x, y) ((x) + (y))
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- __gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
- return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return __gpio_to_irq(gpio);
-}
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 9b621e1..6d2f0d1 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -37,6 +37,7 @@
#include <mach/hardware.h>
#include <mach/platform.h>
+#include <mach/gpio-lpc32xx.h>
#include "common.h"
/*
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 06b5fa8..833c3a2 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -8,7 +8,7 @@
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
@@ -17,13 +17,13 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/interrupt.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/addr-map.h>
#include <mach/mfp-pxa168.h>
#include <mach/pxa168.h>
-#include <mach/gpio.h>
#include <video/pxa168fb.h>
#include <linux/input.h>
#include <plat/pxa27x_keypad.h>
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index c79162a..e411252 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -14,7 +14,6 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <linux/gpio.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/max8649.h>
#include <linux/regulator/fixed.h>
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index 98e25d9..32776f3 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -9,11 +9,11 @@
*/
#include <linux/init.h>
+#include <linux/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/gpio.h>
#include <mach/pxa168.h>
#include <mach/mfp-pxa168.h>
diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
new file mode 100644
index 0000000..c017a98
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
@@ -0,0 +1,30 @@
+#ifndef __ASM_MACH_GPIO_PXA_H
+#define __ASM_MACH_GPIO_PXA_H
+
+#include <mach/addr-map.h>
+#include <mach/irqs.h>
+
+#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
+
+#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x))))
+
+#define NR_BUILTIN_GPIO IRQ_GPIO_NUM
+
+#define gpio_to_bank(gpio) ((gpio) >> 5)
+
+/* NOTE: these macros are defined here to make optimization of
+ * gpio_{get,set}_value() to work when 'gpio' is a constant.
+ * Usage of these macros otherwise is no longer recommended,
+ * use generic GPIO API whenever possible.
+ */
+#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f))
+
+#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
+#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
+#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
+#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
+
+#include <plat/gpio-pxa.h>
+
+#endif /* __ASM_MACH_GPIO_PXA_H */
diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h
index 7bfb827..6812623 100644
--- a/arch/arm/mach-mmp/include/mach/gpio.h
+++ b/arch/arm/mach-mmp/include/mach/gpio.h
@@ -1,36 +1,13 @@
#ifndef __ASM_MACH_GPIO_H
#define __ASM_MACH_GPIO_H
-#include <mach/addr-map.h>
-#include <mach/irqs.h>
#include <asm-generic/gpio.h>
-#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
-
-#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x))))
-
-#define NR_BUILTIN_GPIO IRQ_GPIO_NUM
-
-#define gpio_to_bank(gpio) ((gpio) >> 5)
#define gpio_to_irq(gpio) (IRQ_GPIO_START + (gpio))
#define irq_to_gpio(irq) ((irq) - IRQ_GPIO_START)
-
#define __gpio_is_inverted(gpio) (0)
#define __gpio_is_occupied(gpio) (0)
-/* NOTE: these macros are defined here to make optimization of
- * gpio_{get,set}_value() to work when 'gpio' is a constant.
- * Usage of these macros otherwise is no longer recommended,
- * use generic GPIO API whenever possible.
- */
-#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f))
-
-#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
-#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
-#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
-#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
-
#include <plat/gpio.h>
#endif /* __ASM_MACH_GPIO_H */
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
index 5d6421d..8bfac66 100644
--- a/arch/arm/mach-mmp/jasper.c
+++ b/arch/arm/mach-mmp/jasper.c
@@ -14,7 +14,6 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <linux/gpio.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/max8649.h>
#include <linux/mfd/max8925.h>
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 079c188..65d8689e 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -9,7 +9,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -25,7 +24,7 @@
#include <mach/irqs.h>
#include <mach/dma.h>
#include <mach/mfp.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#include <mach/devices.h>
#include <mach/mmp2.h>
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 0156f53..50c1763 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -7,7 +7,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -21,7 +20,7 @@
#include <mach/regs-apbc.h>
#include <mach/regs-apmu.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#include <mach/dma.h>
#include <mach/devices.h>
#include <mach/mfp.h>
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 1464607..4ebbfbb 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -7,7 +7,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -20,7 +19,7 @@
#include <mach/regs-apmu.h>
#include <mach/cputype.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#include <mach/dma.h>
#include <mach/mfp.h>
#include <mach/devices.h>
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
index c296b75..eb5be87 100644
--- a/arch/arm/mach-mmp/tavorevb.c
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -7,18 +7,18 @@
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/smc91x.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/addr-map.h>
#include <mach/mfp-pxa910.h>
#include <mach/pxa910.h>
-#include <mach/gpio.h>
#include "common.h"
diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c
index a807655..6d84ee7 100644
--- a/arch/arm/mach-msm/board-msm7x27.c
+++ b/arch/arm/mach-msm/board-msm7x27.c
@@ -13,7 +13,7 @@
* GNU General Public License for more details.
*
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -34,7 +34,6 @@
#include <mach/vreg.h>
#include <mach/mpp.h>
-#include <mach/gpio.h>
#include <mach/board.h>
#include <mach/msm_iomap.h>
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index bb72ea0..71de506 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -14,7 +14,7 @@
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/gpio.h>
@@ -31,7 +31,6 @@
#include <asm/memory.h>
#include <asm/setup.h>
-#include <mach/gpio.h>
#include <mach/board.h>
#include <mach/msm_iomap.h>
#include <mach/dma.h>
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index 106170f..cf38e22 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+/* Copyright (c) 2010, 2011, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -8,18 +8,16 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
#include <linux/memblock.h>
#include <asm/mach-types.h>
@@ -70,6 +68,41 @@
{
}
+#ifdef CONFIG_OF
+static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
+ {}
+};
+
+static struct of_device_id msm_dt_gic_match[] __initdata = {
+ { .compatible = "qcom,msm-8660-qgic", },
+ {}
+};
+
+static void __init msm8x60_dt_init(void)
+{
+ struct device_node *node;
+
+ node = of_find_matching_node_by_address(NULL, msm_dt_gic_match,
+ MSM8X60_QGIC_DIST_PHYS);
+ if (node)
+ irq_domain_add_simple(node, GIC_SPI_START);
+
+ if (of_machine_is_compatible("qcom,msm8660-surf")) {
+ printk(KERN_INFO "Init surf UART registers\n");
+ msm8x60_init_uart12dm();
+ }
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ msm_auxdata_lookup, NULL);
+}
+
+static const char *msm8x60_fluid_match[] __initdata = {
+ "qcom,msm8660-fluid",
+ "qcom,msm8660-surf",
+ NULL
+};
+#endif /* CONFIG_OF */
+
MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3")
.fixup = msm8x60_fixup,
.reserve = msm8x60_reserve,
@@ -105,3 +138,14 @@
.init_machine = msm8x60_init,
.timer = &msm_timer,
MACHINE_END
+
+#ifdef CONFIG_OF
+/* TODO: General device tree support for all MSM. */
+DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
+ .map_io = msm8x60_map_io,
+ .init_irq = msm8x60_init_irq,
+ .init_machine = msm8x60_dt_init,
+ .timer = &msm_timer,
+ .dt_compat = msm8x60_fluid_match,
+MACHINE_END
+#endif /* CONFIG_OF */
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 51109b1..7e8909c 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -14,7 +14,7 @@
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/gpio.h>
@@ -32,7 +32,6 @@
#include <mach/board.h>
#include <mach/irqs.h>
#include <mach/sirc.h>
-#include <mach/gpio.h>
#include <mach/vreg.h>
#include <mach/mmc.h>
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index dc0bcb5..afa9293 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -11,7 +11,7 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -22,7 +22,6 @@
#include <linux/delay.h>
-#include <asm/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-msm/board-trout-mmc.c b/arch/arm/mach-msm/board-trout-mmc.c
index f7a9724..8650342 100644
--- a/arch/arm/mach-msm/board-trout-mmc.c
+++ b/arch/arm/mach-msm/board-trout-mmc.c
@@ -1,7 +1,7 @@
/* linux/arch/arm/mach-msm/board-trout-mmc.c
** Author: Brian Swetland <swetland@google.com>
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -11,7 +11,6 @@
#include <linux/err.h>
#include <linux/debugfs.h>
-#include <asm/gpio.h>
#include <asm/io.h>
#include <mach/vreg.h>
diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c
index 729bb49..25105c1 100644
--- a/arch/arm/mach-msm/board-trout-panel.c
+++ b/arch/arm/mach-msm/board-trout-panel.c
@@ -1,7 +1,7 @@
/* linux/arch/arm/mach-msm/board-trout-mddi.c
** Author: Brian Swetland <swetland@google.com>
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -11,7 +11,6 @@
#include <linux/err.h>
#include <asm/io.h>
-#include <asm/gpio.h>
#include <asm/mach-types.h>
#include <mach/msm_fb.h>
diff --git a/arch/arm/mach-msm/include/mach/gpio.h b/arch/arm/mach-msm/include/mach/gpio.h
index 36ad50d..40a8c17 100644
--- a/arch/arm/mach-msm/include/mach/gpio.h
+++ b/arch/arm/mach-msm/include/mach/gpio.h
@@ -1,26 +1 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
- * Author: Mike Lockwood <lockwood@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-#ifndef __ASM_ARCH_MSM_GPIO_H
-#define __ASM_ARCH_MSM_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
-#endif /* __ASM_ARCH_MSM_GPIO_H */
+/* empty */
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 3e24431..e421b70 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -7,12 +7,11 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/irq.h>
-#include <asm/gpio.h>
#include <mach/bridge-regs.h>
#include <plat/irq.h>
#include "common.h"
diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c
index 59b7686..cf4e494 100644
--- a/arch/arm/mach-mv78xx0/mpp.c
+++ b/arch/arm/mach-mv78xx0/mpp.c
@@ -7,13 +7,12 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
#include <plat/mpp.h>
-#include <asm/gpio.h>
#include <mach/hardware.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 3d4c313..af0c212 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -56,6 +56,15 @@
comment "i.MX51 machines:"
+config MACH_IMX51_DT
+ bool "Support i.MX51 platforms from device tree"
+ select SOC_IMX51
+ select USE_OF
+ select MACH_MX51_BABBAGE
+ help
+ Include support for Freescale i.MX51 based platforms
+ using the device tree for discovery
+
config MACH_MX51_BABBAGE
bool "Support MX51 BABBAGE platforms"
select SOC_IMX51
@@ -171,6 +180,18 @@
comment "i.MX53 machines:"
+config MACH_IMX53_DT
+ bool "Support i.MX53 platforms from device tree"
+ select SOC_IMX53
+ select USE_OF
+ select MACH_MX53_ARD
+ select MACH_MX53_EVK
+ select MACH_MX53_LOCO
+ select MACH_MX53_SMD
+ help
+ Include support for Freescale i.MX53 based platforms
+ using the device tree for discovery
+
config MACH_MX53_EVK
bool "Support MX53 EVK platforms"
select SOC_IMX53
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 9565304..0fc6080 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -21,3 +21,6 @@
obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o
obj-$(CONFIG_MACH_MX51_EFIKASB) += board-mx51_efikasb.o
obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o
+
+obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
+obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 5993208..5c83760 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -349,6 +349,12 @@
.wp_type = ESDHC_WP_GPIO,
};
+void __init imx51_babbage_common_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
+ ARRAY_SIZE(mx51babbage_pads));
+}
+
/*
* Board specific initialization.
*/
@@ -363,8 +369,7 @@
#if defined(CONFIG_CPU_FREQ_IMX)
get_cpu_op = mx51_get_cpu_op;
#endif
- mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
- ARRAY_SIZE(mx51babbage_pads));
+ imx51_babbage_common_init();
imx51_add_imx_uart(0, &uart_pdata);
imx51_add_imx_uart(1, NULL);
diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c
index 614edcb..0d7f0ff 100644
--- a/arch/arm/mach-mx5/board-mx53_ard.c
+++ b/arch/arm/mach-mx5/board-mx53_ard.c
@@ -171,9 +171,6 @@
static void __init mx53_ard_io_init(void)
{
- mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
- ARRAY_SIZE(mx53_ard_pads));
-
gpio_request(ARD_ETHERNET_INT_B, "eth-int-b");
gpio_direction_input(ARD_ETHERNET_INT_B);
@@ -216,6 +213,13 @@
return 0;
}
+void __init imx53_ard_common_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
+ ARRAY_SIZE(mx53_ard_pads));
+ weim_cs_config();
+}
+
static struct platform_device *devices[] __initdata = {
&ard_smsc_lan9220_device,
};
@@ -225,8 +229,8 @@
imx53_soc_init();
imx53_add_imx_uart(0, NULL);
+ imx53_ard_common_init();
mx53_ard_io_init();
- weim_cs_config();
platform_add_devices(devices, ARRAY_SIZE(devices));
imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index 6a3e616..6bea31a 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -131,12 +131,17 @@
.num_chipselect = ARRAY_SIZE(mx53_evk_spi_cs),
};
+void __init imx53_evk_common_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
+ ARRAY_SIZE(mx53_evk_pads));
+}
+
static void __init mx53_evk_board_init(void)
{
imx53_soc_init();
+ imx53_evk_common_init();
- mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
- ARRAY_SIZE(mx53_evk_pads));
mx53_evk_init_uart();
mx53_evk_fec_reset();
imx53_add_fec(&mx53_evk_fec_pdata);
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 0af2766..7678f77 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -263,6 +263,12 @@
.num_leds = ARRAY_SIZE(mx53loco_leds),
};
+void __init imx53_qsb_common_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
+ ARRAY_SIZE(mx53_loco_pads));
+}
+
static struct i2c_board_info mx53loco_i2c_devices[] = {
{
I2C_BOARD_INFO("mma8450", 0x1C),
@@ -273,9 +279,8 @@
{
int ret;
imx53_soc_init();
+ imx53_qsb_common_init();
- mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
- ARRAY_SIZE(mx53_loco_pads));
imx53_add_imx_uart(0, NULL);
mx53_loco_fec_reset();
imx53_add_fec(&mx53_loco_fec_data);
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index d12fd30..59c0845 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -125,12 +125,17 @@
}
}
+void __init imx53_smd_common_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
+ ARRAY_SIZE(mx53_smd_pads));
+}
+
static void __init mx53_smd_board_init(void)
{
imx53_soc_init();
+ imx53_smd_common_init();
- mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
- ARRAY_SIZE(mx53_smd_pads));
mx53_smd_init_uart();
mx53_smd_fec_reset();
imx53_add_fec(&mx53_smd_fec_data);
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index b94879e..2aacf41 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -15,6 +15,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/clkdev.h>
+#include <linux/of.h>
#include <asm/div64.h>
@@ -1632,3 +1633,41 @@
MX53_INT_GPT);
return 0;
}
+
+static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
+ unsigned long *ckih1, unsigned long *ckih2)
+{
+ struct device_node *np;
+
+ /* retrieve the freqency of fixed clocks from device tree */
+ for_each_compatible_node(np, NULL, "fixed-clock") {
+ u32 rate;
+ if (of_property_read_u32(np, "clock-frequency", &rate))
+ continue;
+
+ if (of_device_is_compatible(np, "fsl,imx-ckil"))
+ *ckil = rate;
+ else if (of_device_is_compatible(np, "fsl,imx-osc"))
+ *osc = rate;
+ else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
+ *ckih1 = rate;
+ else if (of_device_is_compatible(np, "fsl,imx-ckih2"))
+ *ckih2 = rate;
+ }
+}
+
+int __init mx51_clocks_init_dt(void)
+{
+ unsigned long ckil, osc, ckih1, ckih2;
+
+ clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
+ return mx51_clocks_init(ckil, osc, ckih1, ckih2);
+}
+
+int __init mx53_clocks_init_dt(void)
+{
+ unsigned long ckil, osc, ckih1, ckih2;
+
+ clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
+ return mx53_clocks_init(ckil, osc, ckih1, ckih2);
+}
diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c
new file mode 100644
index 0000000..ccc6158
--- /dev/null
+++ b/arch/arm/mach-mx5/imx51-dt.c
@@ -0,0 +1,116 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/mx51.h>
+
+/*
+ * Lookup table for attaching a specific name and platform_data pointer to
+ * devices as they get created by of_platform_populate(). Ideally this table
+ * would not exist, but the current clock implementation depends on some devices
+ * having a specific name.
+ */
+static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART1_BASE_ADDR, "imx21-uart.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART2_BASE_ADDR, "imx21-uart.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART3_BASE_ADDR, "imx21-uart.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-fec", MX51_FEC_BASE_ADDR, "imx27-fec.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx51.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx51.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx51.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx51.3", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-cspi", MX51_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-sdma", MX51_SDMA_BASE_ADDR, "imx35-sdma", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-wdt", MX51_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
+ { /* sentinel */ }
+};
+
+static void __init imx51_tzic_add_irq_domain(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ irq_domain_add_simple(np, 0);
+}
+
+static void __init imx51_gpio_add_irq_domain(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
+ 32 * 4; /* imx51 gets 4 gpio ports */
+
+ irq_domain_add_simple(np, gpio_irq_base);
+ gpio_irq_base += 32;
+}
+
+static const struct of_device_id imx51_irq_match[] __initconst = {
+ { .compatible = "fsl,imx51-tzic", .data = imx51_tzic_add_irq_domain, },
+ { .compatible = "fsl,imx51-gpio", .data = imx51_gpio_add_irq_domain, },
+ { /* sentinel */ }
+};
+
+static const struct of_device_id imx51_iomuxc_of_match[] __initconst = {
+ { .compatible = "fsl,imx51-iomuxc-babbage", .data = imx51_babbage_common_init, },
+ { /* sentinel */ }
+};
+
+static void __init imx51_dt_init(void)
+{
+ struct device_node *node;
+ const struct of_device_id *of_id;
+ void (*func)(void);
+
+ of_irq_init(imx51_irq_match);
+
+ node = of_find_matching_node(NULL, imx51_iomuxc_of_match);
+ if (node) {
+ of_id = of_match_node(imx51_iomuxc_of_match, node);
+ func = of_id->data;
+ func();
+ of_node_put(node);
+ }
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ imx51_auxdata_lookup, NULL);
+}
+
+static void __init imx51_timer_init(void)
+{
+ mx51_clocks_init_dt();
+}
+
+static struct sys_timer imx51_timer = {
+ .init = imx51_timer_init,
+};
+
+static const char *imx51_dt_board_compat[] __initdata = {
+ "fsl,imx51-babbage",
+ NULL
+};
+
+DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
+ .map_io = mx51_map_io,
+ .init_early = imx51_init_early,
+ .init_irq = mx51_init_irq,
+ .handle_irq = imx51_handle_irq,
+ .timer = &imx51_timer,
+ .init_machine = imx51_dt_init,
+ .dt_compat = imx51_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c
new file mode 100644
index 0000000..ccaa0b8
--- /dev/null
+++ b/arch/arm/mach-mx5/imx53-dt.c
@@ -0,0 +1,126 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/mx53.h>
+
+/*
+ * Lookup table for attaching a specific name and platform_data pointer to
+ * devices as they get created by of_platform_populate(). Ideally this table
+ * would not exist, but the current clock implementation depends on some devices
+ * having a specific name.
+ */
+static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART1_BASE_ADDR, "imx21-uart.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART2_BASE_ADDR, "imx21-uart.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART3_BASE_ADDR, "imx21-uart.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART4_BASE_ADDR, "imx21-uart.3", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART5_BASE_ADDR, "imx21-uart.4", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-fec", MX53_FEC_BASE_ADDR, "imx25-fec.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx53.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx53.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx53.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx53.3", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-cspi", MX53_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C3_BASE_ADDR, "imx-i2c.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-sdma", MX53_SDMA_BASE_ADDR, "imx35-sdma", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-wdt", MX53_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
+ { /* sentinel */ }
+};
+
+static void __init imx53_tzic_add_irq_domain(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ irq_domain_add_simple(np, 0);
+}
+
+static void __init imx53_gpio_add_irq_domain(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
+ 32 * 7; /* imx53 gets 7 gpio ports */
+
+ irq_domain_add_simple(np, gpio_irq_base);
+ gpio_irq_base += 32;
+}
+
+static const struct of_device_id imx53_irq_match[] __initconst = {
+ { .compatible = "fsl,imx53-tzic", .data = imx53_tzic_add_irq_domain, },
+ { .compatible = "fsl,imx53-gpio", .data = imx53_gpio_add_irq_domain, },
+ { /* sentinel */ }
+};
+
+static const struct of_device_id imx53_iomuxc_of_match[] __initconst = {
+ { .compatible = "fsl,imx53-iomuxc-ard", .data = imx53_ard_common_init, },
+ { .compatible = "fsl,imx53-iomuxc-evk", .data = imx53_evk_common_init, },
+ { .compatible = "fsl,imx53-iomuxc-qsb", .data = imx53_qsb_common_init, },
+ { .compatible = "fsl,imx53-iomuxc-smd", .data = imx53_smd_common_init, },
+ { /* sentinel */ }
+};
+
+static void __init imx53_dt_init(void)
+{
+ struct device_node *node;
+ const struct of_device_id *of_id;
+ void (*func)(void);
+
+ of_irq_init(imx53_irq_match);
+
+ node = of_find_matching_node(NULL, imx53_iomuxc_of_match);
+ if (node) {
+ of_id = of_match_node(imx53_iomuxc_of_match, node);
+ func = of_id->data;
+ func();
+ of_node_put(node);
+ }
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ imx53_auxdata_lookup, NULL);
+}
+
+static void __init imx53_timer_init(void)
+{
+ mx53_clocks_init_dt();
+}
+
+static struct sys_timer imx53_timer = {
+ .init = imx53_timer_init,
+};
+
+static const char *imx53_dt_board_compat[] __initdata = {
+ "fsl,imx53-ard",
+ "fsl,imx53-evk",
+ "fsl,imx53-qsb",
+ "fsl,imx53-smd",
+ NULL
+};
+
+DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
+ .map_io = mx53_map_io,
+ .init_early = imx53_init_early,
+ .init_irq = mx53_init_irq,
+ .handle_irq = imx53_handle_irq,
+ .timer = &imx53_timer,
+ .init_machine = imx53_dt_init,
+ .dt_compat = imx53_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mxs/include/mach/gpio.h b/arch/arm/mach-mxs/include/mach/gpio.h
index 56025aa..40a8c17 100644
--- a/arch/arm/mach-mxs/include/mach/gpio.h
+++ b/arch/arm/mach-mxs/include/mach/gpio.h
@@ -1,31 +1 @@
-/*
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_MXS_GPIO_H__
-#define __MACH_MXS_GPIO_H__
-
-#include <asm-generic/gpio.h>
-
-/* use gpiolib dispatchers */
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
-#endif /* __MACH_MXS_GPIO_H__ */
+/* empty */
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 398a75f..0cbb74c 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -27,6 +27,7 @@
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
+#include <plat/gpio-nomadik.h>
#include <plat/mtu.h>
#include <mach/setup.h>
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index ac58e3b..dc67717 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -21,8 +21,8 @@
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c
index abfe25a..0fc2f6f 100644
--- a/arch/arm/mach-nomadik/i2c-8815nhk.c
+++ b/arch/arm/mach-nomadik/i2c-8815nhk.c
@@ -3,8 +3,8 @@
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <linux/i2c-gpio.h>
-#include <linux/gpio.h>
#include <linux/platform_device.h>
+#include <plat/gpio-nomadik.h>
/*
* There are two busses in the 8815NHK.
diff --git a/arch/arm/mach-nomadik/include/mach/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h
index 7a81a04..efdde0a 100644
--- a/arch/arm/mach-nomadik/include/mach/gpio.h
+++ b/arch/arm/mach-nomadik/include/mach/gpio.h
@@ -1,6 +1,4 @@
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H
-#include <plat/gpio.h>
-
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 5b114d1..11c85cd 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -4,7 +4,7 @@
# Common support
obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
-obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o
+obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index eb36b25..4ea60e2 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -11,7 +11,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/input.h>
@@ -30,7 +30,6 @@
#include <plat/io.h>
#include <plat/board-ams-delta.h>
-#include <mach/gpio.h>
#include <plat/keypad.h>
#include <plat/mux.h>
#include <plat/usb.h>
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 999789c..31e089b 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -10,7 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -28,7 +28,6 @@
#include <asm/mach/map.h>
#include <plat/tc.h>
-#include <mach/gpio.h>
#include <plat/mux.h>
#include <plat/flash.h>
#include <plat/fpga.h>
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 23cc9e4..05c6e9d 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -12,7 +12,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -22,7 +22,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index f2fc43d..da0e37d 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -11,13 +11,12 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c/tps65010.h>
#include <plat/mmc.h>
-#include <mach/gpio.h>
#include "board-h2.h"
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 6c70c28..c2e2791 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -18,7 +18,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
@@ -32,7 +32,6 @@
#include <linux/smc91x.h>
#include <mach/hardware.h>
-#include <asm/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 2098525..f8242aa 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -11,13 +11,12 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c/tps65010.h>
#include <plat/mmc.h>
-#include <mach/gpio.h>
#include "board-h3.h"
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 8e2b64a..8f5b6af 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -13,7 +13,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/major.h>
@@ -34,7 +34,6 @@
#include <asm/setup.h>
#include <asm/page.h>
#include <mach/hardware.h>
-#include <asm/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index e81ead1..fcd1a3c 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -23,7 +23,6 @@
* 02110-1301, USA.
*
*/
-
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 8b03459..c2234ca 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -15,7 +15,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -34,7 +34,6 @@
#include <plat/mux.h>
#include <plat/flash.h>
#include <plat/fpga.h>
-#include <mach/gpio.h>
#include <plat/tc.h>
#include <plat/usb.h>
#include <plat/keypad.h>
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 6825635..02789c5 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -7,7 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mutex.h>
@@ -26,7 +26,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 44b8e93..e4dca1d 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -25,7 +25,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -42,7 +42,6 @@
#include <linux/i2c/tps65010.h>
#include <mach/hardware.h>
-#include <asm/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 3d8cd90..50c4e39 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -16,7 +16,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/input.h>
@@ -33,7 +33,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/usb.h>
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index d0eefe8..273771c 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -12,6 +12,7 @@
*/
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -30,7 +31,6 @@
#include <asm/mach/map.h>
#include <plat/led.h>
-#include <mach/gpio.h>
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/usb.h>
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 98e79bc..de36ade 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -15,6 +15,7 @@
*/
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -32,7 +33,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/usb.h>
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index ad3a156..04b1bef 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -10,7 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -28,7 +28,6 @@
#include <asm/mach/map.h>
#include <plat/tc.h>
-#include <mach/gpio.h>
#include <plat/mux.h>
#include <plat/fpga.h>
#include <plat/flash.h>
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index e8ddd86..b59f788 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -12,11 +12,11 @@
* published by the Free Software Foundation.
*/
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <plat/mmc.h>
-#include <mach/gpio.h>
#include <plat/board-sx1.h>
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 602b55c..2bea941 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -14,7 +14,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/input.h>
@@ -32,7 +32,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/dma.h>
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 8016515..940faed 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -13,6 +13,7 @@
*/
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
@@ -33,7 +34,6 @@
#include <plat/board-voiceblue.h>
#include <plat/common.h>
-#include <mach/gpio.h>
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/tc.h>
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 36f26c3..7c50ecf 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -10,6 +10,7 @@
*/
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -24,7 +25,6 @@
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mux.h>
-#include <mach/gpio.h>
#include <plat/mmc.h>
#include <plat/omap7xx.h>
#include <plat/mcbsp.h>
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index cddbf8b..0a17a1a 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -17,6 +17,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/device.h>
@@ -28,7 +29,6 @@
#include <asm/mach/irq.h>
#include <plat/fpga.h>
-#include <mach/gpio.h>
static void fpga_mask_irq(struct irq_data *d)
{
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index e2b9c90..e5b104b 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -35,7 +35,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/sched.h>
@@ -45,7 +45,6 @@
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <mach/gpio.h>
#include <plat/cpu.h>
#define IRQ_BANK(irq) ((irq) >> 5)
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index b4f9be5..4b818eb 100644
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -9,6 +9,7 @@
* The "surfer" expansion board and H2 sample board also have two-color
* green+red LEDs (in parallel), used here for timer and idle indicators.
*/
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/sched.h>
@@ -20,7 +21,6 @@
#include <asm/mach-types.h>
#include <plat/fpga.h>
-#include <mach/gpio.h>
#include "leds.h"
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
index 499d7ad..da09f43 100644
--- a/arch/arm/mach-omap1/leds-osk.c
+++ b/arch/arm/mach-omap1/leds-osk.c
@@ -3,14 +3,13 @@
*
* LED driver for OSK with optional Mistral QVGA board
*/
+#include <linux/gpio.h>
#include <linux/init.h>
#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
-#include <mach/gpio.h>
-
#include "leds.h"
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index 22eb11d..ae6dd93 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -3,13 +3,13 @@
*
* OMAP LEDs dispatcher
*/
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
-#include <mach/gpio.h>
#include <plat/mux.h>
#include "leds.h"
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index ab7395d..91f9abb 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -31,6 +31,7 @@
static int dsp_use;
static struct clk *api_clk;
static struct clk *dsp_clk;
+static struct platform_device **omap_mcbsp_devices;
static void omap1_mcbsp_request(unsigned int id)
{
@@ -78,6 +79,17 @@
.free = omap1_mcbsp_free,
};
+#define OMAP7XX_MCBSP1_BASE 0xfffb1000
+#define OMAP7XX_MCBSP2_BASE 0xfffb1800
+
+#define OMAP1510_MCBSP1_BASE 0xe1011800
+#define OMAP1510_MCBSP2_BASE 0xfffb1000
+#define OMAP1510_MCBSP3_BASE 0xe1017000
+
+#define OMAP1610_MCBSP1_BASE 0xe1011800
+#define OMAP1610_MCBSP2_BASE 0xfffb1000
+#define OMAP1610_MCBSP3_BASE 0xe1017000
+
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
struct resource omap7xx_mcbsp_res[][6] = {
{
@@ -369,6 +381,39 @@
#define OMAP16XX_MCBSP_COUNT 0
#endif
+static void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
+ struct omap_mcbsp_platform_data *config, int size)
+{
+ int i;
+
+ omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
+ GFP_KERNEL);
+ if (!omap_mcbsp_devices) {
+ printk(KERN_ERR "Could not register McBSP devices\n");
+ return;
+ }
+
+ for (i = 0; i < size; i++) {
+ struct platform_device *new_mcbsp;
+ int ret;
+
+ new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
+ if (!new_mcbsp)
+ continue;
+ platform_device_add_resources(new_mcbsp, &res[i * res_count],
+ res_count);
+ config[i].reg_size = 2;
+ config[i].reg_step = 2;
+ new_mcbsp->dev.platform_data = &config[i];
+ ret = platform_device_add(new_mcbsp);
+ if (ret) {
+ platform_device_put(new_mcbsp);
+ continue;
+ }
+ omap_mcbsp_devices[i] = new_mcbsp;
+ }
+}
+
static int __init omap1_mcbsp_init(void)
{
if (!cpu_class_is_omap1())
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 550ca9d..93ae8f2 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -7,7 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -24,7 +24,6 @@
#include <plat/board.h>
#include <plat/mux.h>
-#include <mach/gpio.h>
#include <plat/fpga.h>
#include "pm.h"
diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c
new file mode 100644
index 0000000..6e90665
--- /dev/null
+++ b/arch/arm/mach-omap1/timer.c
@@ -0,0 +1,173 @@
+/**
+ * OMAP1 Dual-Mode Timers - platform device registration
+ *
+ * Contains first level initialization routines which internally
+ * generates timer device information and registers with linux
+ * device model. It also has low level function to chnage the timer
+ * input clock source.
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Tarun Kanti DebBarma <tarun.kanti@ti.com>
+ * Thara Gopinath <thara@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+
+#include <plat/dmtimer.h>
+
+#define OMAP1610_GPTIMER1_BASE 0xfffb1400
+#define OMAP1610_GPTIMER2_BASE 0xfffb1c00
+#define OMAP1610_GPTIMER3_BASE 0xfffb2400
+#define OMAP1610_GPTIMER4_BASE 0xfffb2c00
+#define OMAP1610_GPTIMER5_BASE 0xfffb3400
+#define OMAP1610_GPTIMER6_BASE 0xfffb3c00
+#define OMAP1610_GPTIMER7_BASE 0xfffb7400
+#define OMAP1610_GPTIMER8_BASE 0xfffbd400
+
+#define OMAP1_DM_TIMER_COUNT 8
+
+static int omap1_dm_timer_set_src(struct platform_device *pdev,
+ int source)
+{
+ int n = (pdev->id - 1) << 1;
+ u32 l;
+
+ l = __raw_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
+ l |= source << n;
+ __raw_writel(l, MOD_CONF_CTRL_1);
+
+ return 0;
+}
+
+
+int __init omap1_dm_timer_init(void)
+{
+ int i;
+ int ret;
+ struct dmtimer_platform_data *pdata;
+ struct platform_device *pdev;
+
+ if (!cpu_is_omap16xx())
+ return 0;
+
+ for (i = 1; i <= OMAP1_DM_TIMER_COUNT; i++) {
+ struct resource res[2];
+ u32 base, irq;
+
+ switch (i) {
+ case 1:
+ base = OMAP1610_GPTIMER1_BASE;
+ irq = INT_1610_GPTIMER1;
+ break;
+ case 2:
+ base = OMAP1610_GPTIMER2_BASE;
+ irq = INT_1610_GPTIMER2;
+ break;
+ case 3:
+ base = OMAP1610_GPTIMER3_BASE;
+ irq = INT_1610_GPTIMER3;
+ break;
+ case 4:
+ base = OMAP1610_GPTIMER4_BASE;
+ irq = INT_1610_GPTIMER4;
+ break;
+ case 5:
+ base = OMAP1610_GPTIMER5_BASE;
+ irq = INT_1610_GPTIMER5;
+ break;
+ case 6:
+ base = OMAP1610_GPTIMER6_BASE;
+ irq = INT_1610_GPTIMER6;
+ break;
+ case 7:
+ base = OMAP1610_GPTIMER7_BASE;
+ irq = INT_1610_GPTIMER7;
+ break;
+ case 8:
+ base = OMAP1610_GPTIMER8_BASE;
+ irq = INT_1610_GPTIMER8;
+ break;
+ default:
+ /*
+ * not supposed to reach here.
+ * this is to remove warning.
+ */
+ return -EINVAL;
+ }
+
+ pdev = platform_device_alloc("omap_timer", i);
+ if (!pdev) {
+ pr_err("%s: Failed to device alloc for dmtimer%d\n",
+ __func__, i);
+ return -ENOMEM;
+ }
+
+ memset(res, 0, 2 * sizeof(struct resource));
+ res[0].start = base;
+ res[0].end = base + 0x46;
+ res[0].flags = IORESOURCE_MEM;
+ res[1].start = irq;
+ res[1].end = irq;
+ res[1].flags = IORESOURCE_IRQ;
+ ret = platform_device_add_resources(pdev, res,
+ ARRAY_SIZE(res));
+ if (ret) {
+ dev_err(&pdev->dev, "%s: Failed to add resources.\n",
+ __func__);
+ goto err_free_pdev;
+ }
+
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(&pdev->dev, "%s: Failed to allocate pdata.\n",
+ __func__);
+ ret = -ENOMEM;
+ goto err_free_pdata;
+ }
+
+ pdata->set_timer_src = omap1_dm_timer_set_src;
+ pdata->needs_manual_reset = 1;
+
+ ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
+ if (ret) {
+ dev_err(&pdev->dev, "%s: Failed to add platform data.\n",
+ __func__);
+ goto err_free_pdata;
+ }
+
+ ret = platform_device_add(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "%s: Failed to add platform device.\n",
+ __func__);
+ goto err_free_pdata;
+ }
+
+ dev_dbg(&pdev->dev, " Registered.\n");
+ }
+
+ return 0;
+
+err_free_pdata:
+ kfree(pdata);
+
+err_free_pdev:
+ platform_device_unregister(pdev);
+
+ return ret;
+}
+arch_initcall(omap1_dm_timer_init);
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 57b66d5..e0a318d 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -106,9 +106,13 @@
depends on ARCH_OMAP2PLUS
config MACH_OMAP_GENERIC
- bool "Generic OMAP board"
- depends on ARCH_OMAP2
+ bool "Generic OMAP2+ board"
+ depends on ARCH_OMAP2PLUS
+ select USE_OF
default y
+ help
+ Support for generic TI OMAP2+ boards using Flattened Device Tree.
+ More information at Documentation/devicetree
config MACH_OMAP2_TUSB6010
bool
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index f343365..5129785 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -89,14 +89,13 @@
vp44xx_data.o
# OMAP voltage domains
-ifeq ($(CONFIG_PM),y)
-voltagedomain-common := voltage.o
-obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common)
+voltagedomain-common := voltage.o vc.o vp.o
+obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common) \
+ voltagedomains2xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) \
voltagedomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) \
voltagedomains44xx_data.o
-endif
# OMAP powerdomain framework
powerdomain-common += powerdomain.o powerdomain-common.o
@@ -116,9 +115,12 @@
obj-$(CONFIG_ARCH_OMAP2) += clockdomain.o \
clockdomain2xxx_3xxx.o \
clockdomains2xxx_3xxx_data.o
+obj-$(CONFIG_SOC_OMAP2420) += clockdomains2420_data.o
+obj-$(CONFIG_SOC_OMAP2430) += clockdomains2430_data.o
obj-$(CONFIG_ARCH_OMAP3) += clockdomain.o \
clockdomain2xxx_3xxx.o \
- clockdomains2xxx_3xxx_data.o
+ clockdomains2xxx_3xxx_data.o \
+ clockdomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += clockdomain.o \
clockdomain44xx.o \
clockdomains44xx_data.o
@@ -185,78 +187,66 @@
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
-obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o \
- hsmmc.o
+obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
-obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \
- hsmmc.o
-obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \
- board-flash.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OVERO) += board-overo.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
- hsmmc.o \
- board-flash.o
+obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o
+obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o
+obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o
+obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
+obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
+obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o
+obj-$(CONFIG_MACH_OVERO) += board-overo.o
+obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o
+obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o
+obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o \
- sdram-nokia.o \
- hsmmc.o
+ sdram-nokia.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
sdram-nokia.o \
board-rx51-peripherals.o \
- board-rx51-video.o \
- hsmmc.o
+ board-rx51-video.o
obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom.o \
board-zoom-peripherals.o \
board-zoom-display.o \
- board-flash.o \
- hsmmc.o \
board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom.o \
board-zoom-peripherals.o \
board-zoom-display.o \
- board-flash.o \
- hsmmc.o \
board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \
board-zoom-peripherals.o \
- board-zoom-display.o \
- board-flash.o \
- hsmmc.o
-obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \
- hsmmc.o
+ board-zoom-display.o
+obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o
obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o
-obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \
- hsmmc.o
+obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o
+obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o
obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o \
- hsmmc.o \
omap_phy_internal.o
obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \
- hsmmc.o \
+ omap_phy_internal.o
+
+obj-$(CONFIG_MACH_PCM049) += board-omap4pcm049.o \
omap_phy_internal.o
obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o \
- omap_phy_internal.o \
+ omap_phy_internal.o
obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o
-obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o \
- hsmmc.o
+obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o
obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o
+
# Platform specific device init code
+
+omap-flash-$(CONFIG_MTD_NAND_OMAP2) := board-flash.o
+omap-flash-$(CONFIG_MTD_ONENAND_OMAP2) := board-flash.o
+obj-y += $(omap-flash-y) $(omap-flash-m)
+
+omap-hsmmc-$(CONFIG_MMC_OMAP_HS) := hsmmc.o
+obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y)
+
+
usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o
obj-y += $(usbfs-m) $(usbfs-y)
obj-y += usb-musb.o
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 195157d..638cecb 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -141,12 +141,6 @@
{OMAP_TAG_LCD, &sdp2430_lcd_config},
};
-static void __init omap_2430sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct regulator_consumer_supply sdp2430_vmmc1_supplies[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
@@ -193,7 +187,8 @@
{
omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
ARRAY_SIZE(sdp2430_i2c1_boardinfo));
- omap2_pmic_init("twl4030", &sdp2430_twldata);
+ omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ,
+ &sdp2430_twldata);
return 0;
}
@@ -235,6 +230,7 @@
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap2_hsmmc_init(mmc);
omap2_usbfs_init(&sdp2430_usb_config);
@@ -248,18 +244,12 @@
"Secondary LCD backlight");
}
-static void __init omap_2430sdp_map_io(void)
-{
- omap2_set_globals_243x();
- omap243x_map_common_io();
-}
-
MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
/* Maintainer: Syed Khasim - Texas Instruments Inc */
.atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_2430sdp_map_io,
- .init_early = omap_2430sdp_init_early,
+ .map_io = omap243x_map_io,
+ .init_early = omap2430_init_early,
.init_irq = omap2_init_irq,
.init_machine = omap_2430sdp_init,
.timer = &omap2_timer,
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 2430531..5b5999c 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -225,12 +225,6 @@
static struct omap_board_config_kernel sdp3430_config[] __initdata = {
};
-static void __init omap_3430sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL);
-}
-
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
@@ -719,6 +713,7 @@
gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1;
omap_ads7846_init(1, gpio_pendown, 310, NULL);
board_serial_init();
+ omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
usb_musb_init(NULL);
board_smc91x_init();
board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
@@ -732,7 +727,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_3430sdp_init_early,
+ .init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_3430sdp_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 8b5b5aa..f552305 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -70,13 +70,6 @@
static struct omap_board_config_kernel sdp_config[] __initdata = {
};
-static void __init omap_sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params,
- h8mbx00u0mer0em_sdrc_params);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -207,6 +200,8 @@
omap_board_config = sdp_config;
omap_board_config_size = ARRAY_SIZE(sdp_config);
zoom_peripherals_init();
+ omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
+ h8mbx00u0mer0em_sdrc_params);
zoom_display_init();
board_smc91x_init();
board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16);
@@ -218,7 +213,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_sdp_init_early,
+ .init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_sdp_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index be93110..6d2b614 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -129,7 +129,7 @@
KEY(7, 6, KEY_OK),
KEY(7, 7, KEY_DOWN),
};
-static struct omap_device_pad keypad_pads[] __initdata = {
+static struct omap_device_pad keypad_pads[] = {
{ .name = "kpd_col1.kpd_col1",
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
},
@@ -389,12 +389,6 @@
{ OMAP_TAG_LCD, &sdp4430_lcd_config },
};
-static void __init omap_4430sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_UTMI,
.mode = MUSB_OTG,
@@ -809,6 +803,7 @@
omap_sfh7741prox_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
board_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap4_sdp4430_wifi_init();
omap4_twl6030_hsmmc_init(mmc);
@@ -830,18 +825,12 @@
omap_4430sdp_display_init();
}
-static void __init omap_4430sdp_map_io(void)
-{
- omap2_set_globals_443x();
- omap44xx_map_common_io();
-}
-
MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
.atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_4430sdp_map_io,
- .init_early = omap_4430sdp_init_early,
+ .map_io = omap4_map_io,
+ .init_early = omap4430_init_early,
.init_irq = gic_init_irq,
.init_machine = omap_4430sdp_init,
.timer = &omap4_timer,
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index db110fd..7834536 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -47,12 +47,6 @@
};
#endif
-static void __init am3517_crane_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct usbhs_omap_board_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -70,6 +64,7 @@
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap_board_config = am3517_crane_config;
omap_board_config_size = ARRAY_SIZE(am3517_crane_config);
@@ -101,7 +96,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = am3517_crane_init_early,
+ .init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = am3517_crane_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 1325085..65a5912 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -362,11 +362,6 @@
/*
* Board initialization
*/
-static void __init am3517_evm_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_ULPI,
@@ -469,6 +464,7 @@
am3517_evm_i2c_init();
omap_display_init(&am3517_evm_dss_data);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
/* Configure GPIO for EHCI port */
omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
@@ -493,7 +489,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = am3517_evm_init_early,
+ .init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = am3517_evm_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 67800e6..29c409b 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -273,12 +273,6 @@
{ OMAP_TAG_LCD, &apollon_lcd_config },
};
-static void __init omap_apollon_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct gpio apollon_gpio_leds[] __initdata = {
{ LED0_GPIO13, GPIOF_OUT_INIT_LOW, "LED0" }, /* LED0 - AA10 */
{ LED1_GPIO14, GPIOF_OUT_INIT_LOW, "LED1" }, /* LED1 - AA6 */
@@ -340,20 +334,15 @@
*/
platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
omap_serial_init();
-}
-
-static void __init omap_apollon_map_io(void)
-{
- omap2_set_globals_242x();
- omap242x_map_common_io();
+ omap_sdrc_init(NULL, NULL);
}
MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
.atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_apollon_map_io,
- .init_early = omap_apollon_init_early,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = omap_apollon_init,
.timer = &omap2_timer,
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 38179c1..5665e68 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -471,13 +471,6 @@
omap3_pmic_init("tps65930", &cm_t35_twldata);
}
-static void __init cm_t35_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* nCS and IRQ for CM-T35 ethernet */
@@ -610,6 +603,8 @@
omap_board_config_size = ARRAY_SIZE(cm_t35_config);
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
cm_t35_init_i2c();
omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
cm_t35_init_ethernet();
@@ -637,7 +632,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = cm_t35_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = cm_t35_init,
.timer = &omap3_timer,
@@ -647,7 +642,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = cm_t35_init_early,
+ .init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.init_machine = cm_t3730_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index aed9c29..3f4dc66 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -251,12 +251,6 @@
static struct omap_board_config_kernel cm_t3517_config[] __initdata = {
};
-static void __init cm_t3517_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* GPIO186 - Green LED */
@@ -289,6 +283,7 @@
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap_board_config = cm_t3517_config;
omap_board_config_size = ARRAY_SIZE(cm_t3517_config);
cm_t3517_init_leds();
@@ -302,7 +297,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = cm_t3517_init_early,
+ .init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = cm_t3517_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 99a4243..556df32 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -397,19 +397,6 @@
},
};
-
-static void __init devkit8000_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
-static void __init devkit8000_init_irq(void)
-{
- omap3_init_irq();
-}
-
#define OMAP_DM9000_BASE 0x2c000000
static struct resource omap_dm9000_resources[] = {
@@ -645,6 +632,8 @@
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_dm9000_init();
@@ -670,8 +659,8 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = devkit8000_init_early,
- .init_irq = devkit8000_init_irq,
+ .init_early = omap35xx_init_early,
+ .init_irq = omap3_init_irq,
.init_machine = devkit8000_init,
.timer = &omap3_secure_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index aa1b0cb..30a6f52 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -148,11 +148,6 @@
board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
gpmc_nand_init(&board_nand_data);
}
-#else
-void
-__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, int nand_type)
-{
-}
#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
/**
diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h
index c240a3f..d25503a 100644
--- a/arch/arm/mach-omap2/board-flash.h
+++ b/arch/arm/mach-omap2/board-flash.h
@@ -24,7 +24,26 @@
int nr_parts;
};
+#if defined(CONFIG_MTD_NAND_OMAP2) || \
+ defined(CONFIG_MTD_NAND_OMAP2_MODULE) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
extern void board_flash_init(struct flash_partitions [],
char chip_sel[][GPMC_CS_NUM], int nand_type);
+#else
+static inline void board_flash_init(struct flash_partitions part[],
+ char chip_sel[][GPMC_CS_NUM], int nand_type)
+{
+}
+#endif
+
+#if defined(CONFIG_MTD_NAND_OMAP2) || \
+ defined(CONFIG_MTD_NAND_OMAP2_MODULE)
extern void board_nand_init(struct mtd_partition *nand_parts,
u8 nr_parts, u8 cs, int nand_type);
+#else
+static inline void board_nand_init(struct mtd_partition *nand_parts,
+ u8 nr_parts, u8 cs, int nand_type)
+{
+}
+#endif
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 2564269..67f0a12 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -1,76 +1,162 @@
/*
- * linux/arch/arm/mach-omap2/board-generic.c
- *
* Copyright (C) 2005 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
*
- * Modified from mach-omap/omap1/board-generic.c
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
- * Code for generic OMAP2 board. Should work on many OMAP2 systems where
- * the bootloader passes the board-specific data to the kernel.
- * Do not put any board specific code to this file; create a new machine
- * type if you need custom low-level initializations.
+ * Modified from the original mach-omap/omap2/board-generic.c did by Paul
+ * to support the OMAP2+ device tree boards with an unique board file.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/irqdomain.h>
+#include <linux/i2c/twl.h>
#include <mach/hardware.h>
-#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
+#include <mach/omap4-common.h>
+#include "common-board-devices.h"
-static struct omap_board_config_kernel generic_config[] = {
+/*
+ * XXX: Still needed to boot until the i2c & twl driver is adapted to
+ * device-tree
+ */
+static struct twl4030_platform_data sdp4430_twldata = {
+ .irq_base = TWL6030_IRQ_BASE,
+ .irq_end = TWL6030_IRQ_END,
};
-static void __init omap_generic_init_early(void)
+static void __init omap4_i2c_init(void)
{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
+ omap4_pmic_init("twl6030", &sdp4430_twldata);
}
+static struct twl4030_platform_data beagle_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+};
+
+static void __init omap3_i2c_init(void)
+{
+ omap3_pmic_init("twl4030", &beagle_twldata);
+}
+
+static struct of_device_id omap_dt_match_table[] __initdata = {
+ { .compatible = "simple-bus", },
+ { .compatible = "ti,omap-infra", },
+ { }
+};
+
+static struct of_device_id intc_match[] __initdata = {
+ { .compatible = "ti,omap3-intc", },
+ { .compatible = "arm,cortex-a9-gic", },
+ { }
+};
+
static void __init omap_generic_init(void)
{
+ struct device_node *node = of_find_matching_node(NULL, intc_match);
+ if (node)
+ irq_domain_add_simple(node, 0);
+
omap_serial_init();
- omap_board_config = generic_config;
- omap_board_config_size = ARRAY_SIZE(generic_config);
+ omap_sdrc_init(NULL, NULL);
+
+ of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
}
-static void __init omap_generic_map_io(void)
+static void __init omap4_init(void)
{
- if (cpu_is_omap242x()) {
- omap2_set_globals_242x();
- omap242x_map_common_io();
- } else if (cpu_is_omap243x()) {
- omap2_set_globals_243x();
- omap243x_map_common_io();
- } else if (cpu_is_omap34xx()) {
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
- } else if (cpu_is_omap44xx()) {
- omap2_set_globals_443x();
- omap44xx_map_common_io();
- }
+ omap4_i2c_init();
+ omap_generic_init();
}
-/* XXX This machine entry name should be updated */
-MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
- /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
+static void __init omap3_init(void)
+{
+ omap3_i2c_init();
+ omap_generic_init();
+}
+
+#if defined(CONFIG_SOC_OMAP2420)
+static const char *omap242x_boards_compat[] __initdata = {
+ "ti,omap2420",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
.atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_generic_map_io,
- .init_early = omap_generic_init_early,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = omap_generic_init,
.timer = &omap2_timer,
+ .dt_compat = omap242x_boards_compat,
MACHINE_END
+#endif
+
+#if defined(CONFIG_SOC_OMAP2430)
+static const char *omap243x_boards_compat[] __initdata = {
+ "ti,omap2430",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
+ .atag_offset = 0x100,
+ .reserve = omap_reserve,
+ .map_io = omap243x_map_io,
+ .init_early = omap2430_init_early,
+ .init_irq = omap2_init_irq,
+ .init_machine = omap_generic_init,
+ .timer = &omap2_timer,
+ .dt_compat = omap243x_boards_compat,
+MACHINE_END
+#endif
+
+#if defined(CONFIG_ARCH_OMAP3)
+static const char *omap3_boards_compat[] __initdata = {
+ "ti,omap3",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
+ .atag_offset = 0x100,
+ .reserve = omap_reserve,
+ .map_io = omap3_map_io,
+ .init_early = omap3430_init_early,
+ .init_irq = omap3_init_irq,
+ .init_machine = omap3_init,
+ .timer = &omap3_timer,
+ .dt_compat = omap3_boards_compat,
+MACHINE_END
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4)
+static const char *omap4_boards_compat[] __initdata = {
+ "ti,omap4",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
+ .atag_offset = 0x100,
+ .reserve = omap_reserve,
+ .map_io = omap4_map_io,
+ .init_early = omap4430_init_early,
+ .init_irq = gic_init_irq,
+ .init_machine = omap4_init,
+ .timer = &omap4_timer,
+ .dt_compat = omap4_boards_compat,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index a58c6ba..a65effe 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -10,7 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -31,7 +31,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
@@ -290,17 +289,6 @@
{ OMAP_TAG_LCD, &h4_lcd_config },
};
-static void __init omap_h4_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
-static void __init omap_h4_init_irq(void)
-{
- omap2_init_irq();
-}
-
static struct at24_platform_data m24c01 = {
.byte_len = SZ_1K / 8,
.page_size = 16,
@@ -371,22 +359,17 @@
platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
omap2_usbfs_init(&h4_usb_config);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
h4_init_flash();
}
-static void __init omap_h4_map_io(void)
-{
- omap2_set_globals_242x();
- omap242x_map_common_io();
-}
-
MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
.atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_h4_map_io,
- .init_early = omap_h4_init_early,
- .init_irq = omap_h4_init_irq,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
+ .init_irq = omap2_init_irq,
.init_machine = omap_h4_init,
.timer = &omap2_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 7040352..e20cad6 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -491,13 +491,6 @@
&igep_vwlan_device,
};
-static void __init igep_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(m65kxxxxam_sdrc_params,
- m65kxxxxam_sdrc_params);
-}
-
static int igep2_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
@@ -650,6 +643,8 @@
igep_i2c_init();
platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices));
omap_serial_init();
+ omap_sdrc_init(m65kxxxxam_sdrc_params,
+ m65kxxxxam_sdrc_params);
usb_musb_init(NULL);
igep_flash_init();
@@ -675,7 +670,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = igep_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = igep_init,
.timer = &omap3_timer,
@@ -685,7 +680,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = igep_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = igep_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index edf752b..5797917 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -10,7 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -34,7 +34,6 @@
#include <asm/mach/map.h>
#include <plat/mcspi.h>
-#include <mach/gpio.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/gpmc.h>
@@ -193,12 +192,6 @@
{ OMAP_TAG_LCD, &ldp_lcd_config },
};
-static void __init omap_ldp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct twl4030_gpio_platform_data ldp_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
@@ -325,6 +318,7 @@
platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
omap_ads7846_init(1, 54, 310, NULL);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
usb_musb_init(NULL);
board_nand_init(ldp_nand_partitions,
ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
@@ -336,7 +330,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_ldp_init_early,
+ .init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_ldp_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 6ce7481..e9d5f4a 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -616,18 +616,6 @@
},
};
-static void __init n8x0_map_io(void)
-{
- omap2_set_globals_242x();
- omap242x_map_common_io();
-}
-
-static void __init n8x0_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* I2S codec port pins for McBSP block */
@@ -689,6 +677,7 @@
i2c_register_board_info(2, n810_i2c_board_info_2,
ARRAY_SIZE(n810_i2c_board_info_2));
board_serial_init();
+ omap_sdrc_init(NULL, NULL);
gpmc_onenand_init(board_onenand_data);
n8x0_mmc_init();
n8x0_usb_init();
@@ -697,8 +686,8 @@
MACHINE_START(NOKIA_N800, "Nokia N800")
.atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = n8x0_map_io,
- .init_early = n8x0_init_early,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
@@ -707,8 +696,8 @@
MACHINE_START(NOKIA_N810, "Nokia N810")
.atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = n8x0_map_io,
- .init_early = n8x0_init_early,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
@@ -717,8 +706,8 @@
MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
.atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = n8x0_map_io,
- .init_early = n8x0_init_early,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 1fde8a0..0b8e0fc 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -447,13 +447,6 @@
static void __init omap3_beagle_init_early(void)
{
omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
-static void __init omap3_beagle_init_irq(void)
-{
- omap3_init_irq();
}
static struct platform_device *omap3_beagle_devices[] __initdata = {
@@ -493,8 +486,8 @@
if (cpu_is_omap3630()) {
struct device *mpu_dev, *iva_dev;
- mpu_dev = omap2_get_mpuss_device();
- iva_dev = omap2_get_iva_device();
+ mpu_dev = omap_device_get_by_hwmod_name("mpu");
+ iva_dev = omap_device_get_by_hwmod_name("iva");
if (!mpu_dev || !iva_dev) {
pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
@@ -534,6 +527,8 @@
ARRAY_SIZE(omap3_beagle_devices));
omap_display_init(&beagle_dss_data);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_mux_init_gpio(170, OMAP_PIN_INPUT);
/* REVISIT leave DVI powered down until it's needed ... */
@@ -561,7 +556,7 @@
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3_beagle_init_early,
- .init_irq = omap3_beagle_init_irq,
+ .init_irq = omap3_init_irq,
.init_machine = omap3_beagle_init,
.timer = &omap3_secure_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 15c69a0..aa6a935 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -520,12 +520,6 @@
static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
};
-static void __init omap3_evm_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL);
-}
-
static struct usbhs_omap_board_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -640,6 +634,7 @@
omap_display_init(&omap3_evm_dss_data);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
usb_nop_xceiv_register();
@@ -684,7 +679,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap3_evm_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap3_evm_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 01354a2..7c0f193 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -182,12 +182,6 @@
gpmc_smsc911x_init(&board_smsc911x_data);
}
-static void __init omap3logic_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -200,6 +194,7 @@
omap3torpedo_fix_pbias_voltage();
omap3logic_i2c_init();
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
board_mmc_init();
board_smsc911x_init();
@@ -211,7 +206,7 @@
MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
.atag_offset = 0x100,
.map_io = omap3_map_io,
- .init_early = omap3logic_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap3logic_init,
.timer = &omap3_timer,
@@ -220,7 +215,7 @@
MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
.atag_offset = 0x100,
.map_io = omap3_map_io,
- .init_early = omap3logic_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap3logic_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index ace5693..fed2f7d 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -525,13 +525,6 @@
}
};
-static void __init omap3pandora_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
static void __init pandora_wl1251_init(void)
{
struct wl12xx_platform_data pandora_wl1251_pdata;
@@ -593,6 +586,8 @@
ARRAY_SIZE(omap3pandora_devices));
omap_display_init(&pandora_dss_data);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
spi_register_board_info(omap3pandora_spi_board_info,
ARRAY_SIZE(omap3pandora_spi_board_info));
omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
@@ -609,7 +604,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap3pandora_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap3pandora_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index ba13e1d..170e1eb 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -428,17 +428,6 @@
static struct omap_board_config_kernel omap3_stalker_config[] __initdata = {
};
-static void __init omap3_stalker_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL);
-}
-
-static void __init omap3_stalker_init_irq(void)
-{
- omap3_init_irq();
-}
-
static struct platform_device *omap3_stalker_devices[] __initdata = {
&keys_gpio,
};
@@ -478,6 +467,7 @@
omap_display_init(&omap3_stalker_dss_data);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
@@ -496,8 +486,8 @@
/* Maintainer: Jason Lam -lzg@ema-tech.com */
.atag_offset = 0x100,
.map_io = omap3_map_io,
- .init_early = omap3_stalker_init_early,
- .init_irq = omap3_stalker_init_irq,
+ .init_early = omap35xx_init_early,
+ .init_irq = omap3_init_irq,
.init_machine = omap3_stalker_init,
.timer = &omap3_secure_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 49e4bd2..c2d5348 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -326,18 +326,6 @@
};
#endif
-static void __init omap3_touchbook_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
-static void __init omap3_touchbook_init_irq(void)
-{
- omap3_init_irq();
-}
-
static struct platform_device *omap3_touchbook_devices[] __initdata = {
&omap3_touchbook_lcd_device,
&leds_gpio,
@@ -385,6 +373,8 @@
platform_add_devices(omap3_touchbook_devices,
ARRAY_SIZE(omap3_touchbook_devices));
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_mux_init_gpio(170, OMAP_PIN_INPUT);
/* REVISIT leave DVI powered down until it's needed ... */
@@ -407,8 +397,8 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap3_touchbook_init_early,
- .init_irq = omap3_touchbook_init_irq,
+ .init_early = omap3430_init_early,
+ .init_irq = omap3_init_irq,
.init_machine = omap3_touchbook_init,
.timer = &omap3_secure_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 683bede..2141894 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -95,12 +95,6 @@
&wl1271_device,
};
-static void __init omap4_panda_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -569,24 +563,19 @@
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
platform_device_register(&omap_vwlan_device);
board_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap4_twl6030_hsmmc_init(mmc);
omap4_ehci_init();
usb_musb_init(&musb_board_data);
omap4_panda_display_init();
}
-static void __init omap4_panda_map_io(void)
-{
- omap2_set_globals_443x();
- omap44xx_map_common_io();
-}
-
MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
/* Maintainer: David Anders - Texas Instruments Inc */
.atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap4_panda_map_io,
- .init_early = omap4_panda_init_early,
+ .map_io = omap4_map_io,
+ .init_early = omap4430_init_early,
.init_irq = gic_init_irq,
.init_machine = omap4_panda_init,
.timer = &omap4_timer,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index e592fb1..9f13dc2 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -478,13 +478,6 @@
return 0;
}
-static void __init overo_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
@@ -514,6 +507,8 @@
overo_i2c_init();
omap_display_init(&overo_dss_data);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_nand_flash_init(0, overo_nand_partitions,
ARRAY_SIZE(overo_nand_partitions));
usb_musb_init(NULL);
@@ -564,7 +559,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = overo_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = overo_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 9a8ce23..616fb39 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -123,15 +123,6 @@
omap2_hsmmc_init(mmc);
}
-static void __init rm680_init_early(void)
-{
- struct omap_sdrc_params *sdrc_params;
-
- omap2_init_common_infrastructure();
- sdrc_params = nokia_get_sdram_timings();
- omap2_init_common_devices(sdrc_params, sdrc_params);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -140,23 +131,23 @@
static void __init rm680_init(void)
{
+ struct omap_sdrc_params *sdrc_params;
+
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
+
+ sdrc_params = nokia_get_sdram_timings();
+ omap_sdrc_init(sdrc_params, sdrc_params);
+
usb_musb_init(NULL);
rm680_peripherals_init();
}
-static void __init rm680_map_io(void)
-{
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
-}
-
MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
.atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = rm680_map_io,
- .init_early = rm680_init_early,
+ .map_io = omap3_map_io,
+ .init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.init_machine = rm680_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index a6c473b..74c8aad 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -102,15 +102,6 @@
{ OMAP_TAG_LCD, &rx51_lcd_config },
};
-static void __init rx51_init_early(void)
-{
- struct omap_sdrc_params *sdrc_params;
-
- omap2_init_common_infrastructure();
- sdrc_params = nokia_get_sdram_timings();
- omap2_init_common_devices(sdrc_params, sdrc_params);
-}
-
extern void __init rx51_peripherals_init(void);
#ifdef CONFIG_OMAP_MUX
@@ -127,11 +118,17 @@
static void __init rx51_init(void)
{
+ struct omap_sdrc_params *sdrc_params;
+
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_board_config = rx51_config;
omap_board_config_size = ARRAY_SIZE(rx51_config);
omap3_pm_init_cpuidle(rx51_cpuidle_params);
omap_serial_init();
+
+ sdrc_params = nokia_get_sdram_timings();
+ omap_sdrc_init(sdrc_params, sdrc_params);
+
usb_musb_init(&musb_board_data);
rx51_peripherals_init();
@@ -142,12 +139,6 @@
platform_device_register(&leds_gpio);
}
-static void __init rx51_map_io(void)
-{
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
-}
-
static void __init rx51_reserve(void)
{
rx51_video_mem_init();
@@ -158,8 +149,8 @@
/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
.atag_offset = 0x100,
.reserve = rx51_reserve,
- .map_io = rx51_map_io,
- .init_early = rx51_init_early,
+ .map_io = omap3_map_io,
+ .init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.init_machine = rx51_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index e41958a..e26c79c 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -27,15 +27,10 @@
static struct omap_board_config_kernel ti8168_evm_config[] __initdata = {
};
-static void __init ti8168_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static void __init ti8168_evm_init(void)
{
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap_board_config = ti8168_evm_config;
omap_board_config_size = ARRAY_SIZE(ti8168_evm_config);
}
@@ -50,7 +45,7 @@
/* Maintainer: Texas Instruments */
.atag_offset = 0x100,
.map_io = ti8168_evm_map_io,
- .init_early = ti8168_init_early,
+ .init_early = ti816x_init_early,
.init_irq = ti816x_init_irq,
.timer = &omap3_timer,
.init_machine = ti8168_evm_init,
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 72f1db4..be6684d 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -34,17 +34,6 @@
#define ZOOM3_EHCI_RESET_GPIO 64
-static void __init omap_zoom_init_early(void)
-{
- omap2_init_common_infrastructure();
- if (machine_is_omap_zoom2())
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
- else if (machine_is_omap_zoom3())
- omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params,
- h8mbx00u0mer0em_sdrc_params);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* WLAN IRQ - GPIO 162 */
@@ -129,6 +118,14 @@
ZOOM_NAND_CS, NAND_BUSWIDTH_16);
zoom_debugboard_init();
zoom_peripherals_init();
+
+ if (machine_is_omap_zoom2())
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
+ else if (machine_is_omap_zoom3())
+ omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
+ h8mbx00u0mer0em_sdrc_params);
+
zoom_display_init();
}
@@ -136,7 +133,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_zoom_init_early,
+ .init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_zoom_init,
.timer = &omap3_timer,
@@ -146,7 +143,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_zoom_init_early,
+ .init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_zoom_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index debc040..14a6277 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -1898,6 +1898,54 @@
CLK(NULL, "pka_ick", &pka_ick, CK_242X),
CLK(NULL, "usb_fck", &usb_fck, CK_242X),
CLK("musb-hdrc", "fck", &osc_ck, CK_242X),
+ CLK("omap_timer.1", "fck", &gpt1_fck, CK_242X),
+ CLK("omap_timer.2", "fck", &gpt2_fck, CK_242X),
+ CLK("omap_timer.3", "fck", &gpt3_fck, CK_242X),
+ CLK("omap_timer.4", "fck", &gpt4_fck, CK_242X),
+ CLK("omap_timer.5", "fck", &gpt5_fck, CK_242X),
+ CLK("omap_timer.6", "fck", &gpt6_fck, CK_242X),
+ CLK("omap_timer.7", "fck", &gpt7_fck, CK_242X),
+ CLK("omap_timer.8", "fck", &gpt8_fck, CK_242X),
+ CLK("omap_timer.9", "fck", &gpt9_fck, CK_242X),
+ CLK("omap_timer.10", "fck", &gpt10_fck, CK_242X),
+ CLK("omap_timer.11", "fck", &gpt11_fck, CK_242X),
+ CLK("omap_timer.12", "fck", &gpt12_fck, CK_242X),
+ CLK("omap_timer.1", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.2", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.3", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.4", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.5", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.6", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.7", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.8", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.9", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.10", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.11", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.12", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.1", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.2", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.3", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.4", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.5", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.6", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.7", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.8", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.9", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.10", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.11", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.12", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.1", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.2", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.3", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.4", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.5", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.6", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.7", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.8", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.9", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.10", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.11", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.12", "alt_ck", &alt_ck, CK_243X),
};
/*
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index 96a942e..ea6717c 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -1998,6 +1998,54 @@
CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X),
CLK("omap_hsmmc.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X),
CLK("omap_hsmmc.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X),
+ CLK("omap_timer.1", "fck", &gpt1_fck, CK_243X),
+ CLK("omap_timer.2", "fck", &gpt2_fck, CK_243X),
+ CLK("omap_timer.3", "fck", &gpt3_fck, CK_243X),
+ CLK("omap_timer.4", "fck", &gpt4_fck, CK_243X),
+ CLK("omap_timer.5", "fck", &gpt5_fck, CK_243X),
+ CLK("omap_timer.6", "fck", &gpt6_fck, CK_243X),
+ CLK("omap_timer.7", "fck", &gpt7_fck, CK_243X),
+ CLK("omap_timer.8", "fck", &gpt8_fck, CK_243X),
+ CLK("omap_timer.9", "fck", &gpt9_fck, CK_243X),
+ CLK("omap_timer.10", "fck", &gpt10_fck, CK_243X),
+ CLK("omap_timer.11", "fck", &gpt11_fck, CK_243X),
+ CLK("omap_timer.12", "fck", &gpt12_fck, CK_243X),
+ CLK("omap_timer.1", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.2", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.3", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.4", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.5", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.6", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.7", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.8", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.9", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.10", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.11", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.12", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.1", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.2", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.3", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.4", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.5", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.6", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.7", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.8", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.9", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.10", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.11", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.12", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.1", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.2", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.3", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.4", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.5", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.6", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.7", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.8", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.9", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.10", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.11", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.12", "alt_ck", &alt_ck, CK_243X),
};
/*
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index b9b8446..65dd363 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3464,6 +3464,42 @@
CLK("musb-am35x", "fck", &hsotgusb_fck_am35xx, CK_AM35XX),
CLK(NULL, "hecc_ck", &hecc_ck, CK_AM35XX),
CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX),
+ CLK("omap_timer.1", "fck", &gpt1_fck, CK_3XXX),
+ CLK("omap_timer.2", "fck", &gpt2_fck, CK_3XXX),
+ CLK("omap_timer.3", "fck", &gpt3_fck, CK_3XXX),
+ CLK("omap_timer.4", "fck", &gpt4_fck, CK_3XXX),
+ CLK("omap_timer.5", "fck", &gpt5_fck, CK_3XXX),
+ CLK("omap_timer.6", "fck", &gpt6_fck, CK_3XXX),
+ CLK("omap_timer.7", "fck", &gpt7_fck, CK_3XXX),
+ CLK("omap_timer.8", "fck", &gpt8_fck, CK_3XXX),
+ CLK("omap_timer.9", "fck", &gpt9_fck, CK_3XXX),
+ CLK("omap_timer.10", "fck", &gpt10_fck, CK_3XXX),
+ CLK("omap_timer.11", "fck", &gpt11_fck, CK_3XXX),
+ CLK("omap_timer.12", "fck", &gpt12_fck, CK_3XXX),
+ CLK("omap_timer.1", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.2", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.3", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.4", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.5", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.6", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.7", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.8", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.9", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.10", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.11", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.12", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.1", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.2", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.3", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.4", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.5", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.6", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.7", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.8", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.9", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.10", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.11", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.12", "sys_ck", &sys_ck, CK_3XXX),
};
@@ -3472,7 +3508,16 @@
struct omap_clk *c;
u32 cpu_clkflg = 0;
- if (cpu_is_omap3517()) {
+ /*
+ * 3505 must be tested before 3517, since 3517 returns true
+ * for both AM3517 chips and AM3517 family chips, which
+ * includes 3505. Unfortunately there's no obvious family
+ * test for 3517/3505 :-(
+ */
+ if (cpu_is_omap3505()) {
+ cpu_mask = RATE_IN_34XX;
+ cpu_clkflg = CK_3505;
+ } else if (cpu_is_omap3517()) {
cpu_mask = RATE_IN_34XX;
cpu_clkflg = CK_3517;
} else if (cpu_is_omap3505()) {
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index c0b6fbd..946bf04 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3363,6 +3363,39 @@
CLK("usbhs-omap.0", "usbhost_ick", &dummy_ck, CK_443X),
CLK("usbhs-omap.0", "usbtll_fck", &dummy_ck, CK_443X),
CLK("omap_wdt", "ick", &dummy_ck, CK_443X),
+ CLK("omap_timer.1", "fck", &timer1_fck, CK_443X),
+ CLK("omap_timer.2", "fck", &timer2_fck, CK_443X),
+ CLK("omap_timer.3", "fck", &timer3_fck, CK_443X),
+ CLK("omap_timer.4", "fck", &timer4_fck, CK_443X),
+ CLK("omap_timer.5", "fck", &timer5_fck, CK_443X),
+ CLK("omap_timer.6", "fck", &timer6_fck, CK_443X),
+ CLK("omap_timer.7", "fck", &timer7_fck, CK_443X),
+ CLK("omap_timer.8", "fck", &timer8_fck, CK_443X),
+ CLK("omap_timer.9", "fck", &timer9_fck, CK_443X),
+ CLK("omap_timer.10", "fck", &timer10_fck, CK_443X),
+ CLK("omap_timer.11", "fck", &timer11_fck, CK_443X),
+ CLK("omap_timer.1", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.2", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.3", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.4", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.5", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.6", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.7", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.8", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.9", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.10", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.11", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.1", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.2", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.3", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.4", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.9", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.10", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.11", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.5", "sys_ck", &syc_clk_div_ck, CK_443X),
+ CLK("omap_timer.6", "sys_ck", &syc_clk_div_ck, CK_443X),
+ CLK("omap_timer.7", "sys_ck", &syc_clk_div_ck, CK_443X),
+ CLK("omap_timer.8", "sys_ck", &syc_clk_div_ck, CK_443X),
};
int __init omap4xxx_clk_init(void)
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 8f08906..8480ee4 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -73,9 +73,6 @@
if (!clkdm || !clkdm->name)
return -EINVAL;
- if (!omap_chip_is(clkdm->omap_chip))
- return -EINVAL;
-
pwrdm = pwrdm_lookup(clkdm->pwrdm.name);
if (!pwrdm) {
pr_err("clockdomain: %s: powerdomain %s does not exist\n",
@@ -105,13 +102,10 @@
{
struct clkdm_dep *cd;
- if (!clkdm || !deps || !omap_chip_is(clkdm->omap_chip))
+ if (!clkdm || !deps)
return ERR_PTR(-EINVAL);
for (cd = deps; cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
-
if (!cd->clkdm && cd->clkdm_name)
cd->clkdm = _clkdm_lookup(cd->clkdm_name);
@@ -148,9 +142,6 @@
if (!autodep)
return;
- if (!omap_chip_is(autodep->omap_chip))
- return;
-
clkdm = clkdm_lookup(autodep->clkdm.name);
if (!clkdm) {
pr_err("clockdomain: autodeps: clockdomain %s does not exist\n",
@@ -182,9 +173,6 @@
if (IS_ERR(autodep->clkdm.ptr))
continue;
- if (!omap_chip_is(autodep->omap_chip))
- continue;
-
pr_debug("clockdomain: adding %s sleepdep/wkdep for "
"clkdm %s\n", autodep->clkdm.ptr->name,
clkdm->name);
@@ -216,9 +204,6 @@
if (IS_ERR(autodep->clkdm.ptr))
continue;
- if (!omap_chip_is(autodep->omap_chip))
- continue;
-
pr_debug("clockdomain: removing %s sleepdep/wkdep for "
"clkdm %s\n", autodep->clkdm.ptr->name,
clkdm->name);
@@ -243,8 +228,6 @@
struct clkdm_dep *cd;
for (cd = clkdm_deps; cd && cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
if (cd->clkdm)
continue;
cd->clkdm = _clkdm_lookup(cd->clkdm_name);
@@ -257,43 +240,113 @@
/* Public functions */
/**
- * clkdm_init - set up the clockdomain layer
- * @clkdms: optional pointer to an array of clockdomains to register
- * @init_autodeps: optional pointer to an array of autodeps to register
- * @custom_funcs: func pointers for arch specific implementations
+ * clkdm_register_platform_funcs - register clockdomain implementation fns
+ * @co: func pointers for arch specific implementations
*
- * Set up internal state. If a pointer to an array of clockdomains
- * @clkdms was supplied, loop through the list of clockdomains,
- * register all that are available on the current platform. Similarly,
- * if a pointer to an array of clockdomain autodependencies
- * @init_autodeps was provided, register those. No return value.
+ * Register the list of function pointers used to implement the
+ * clockdomain functions on different OMAP SoCs. Should be called
+ * before any other clkdm_register*() function. Returns -EINVAL if
+ * @co is null, -EEXIST if platform functions have already been
+ * registered, or 0 upon success.
*/
-void clkdm_init(struct clockdomain **clkdms,
- struct clkdm_autodep *init_autodeps,
- struct clkdm_ops *custom_funcs)
+int clkdm_register_platform_funcs(struct clkdm_ops *co)
+{
+ if (!co)
+ return -EINVAL;
+
+ if (arch_clkdm)
+ return -EEXIST;
+
+ arch_clkdm = co;
+
+ return 0;
+};
+
+/**
+ * clkdm_register_clkdms - register SoC clockdomains
+ * @cs: pointer to an array of struct clockdomain to register
+ *
+ * Register the clockdomains available on a particular OMAP SoC. Must
+ * be called after clkdm_register_platform_funcs(). May be called
+ * multiple times. Returns -EACCES if called before
+ * clkdm_register_platform_funcs(); -EINVAL if the argument @cs is
+ * null; or 0 upon success.
+ */
+int clkdm_register_clkdms(struct clockdomain **cs)
{
struct clockdomain **c = NULL;
- struct clockdomain *clkdm;
- struct clkdm_autodep *autodep = NULL;
- if (!custom_funcs)
- WARN(1, "No custom clkdm functions registered\n");
- else
- arch_clkdm = custom_funcs;
+ if (!arch_clkdm)
+ return -EACCES;
- if (clkdms)
- for (c = clkdms; *c; c++)
- _clkdm_register(*c);
+ if (!cs)
+ return -EINVAL;
- autodeps = init_autodeps;
+ for (c = cs; *c; c++)
+ _clkdm_register(*c);
+
+ return 0;
+}
+
+/**
+ * clkdm_register_autodeps - register autodeps (if required)
+ * @ia: pointer to a static array of struct clkdm_autodep to register
+ *
+ * Register clockdomain "automatic dependencies." These are
+ * clockdomain wakeup and sleep dependencies that are automatically
+ * added whenever the first clock inside a clockdomain is enabled, and
+ * removed whenever the last clock inside a clockdomain is disabled.
+ * These are currently only used on OMAP3 devices, and are deprecated,
+ * since they waste energy. However, until the OMAP2/3 IP block
+ * enable/disable sequence can be converted to match the OMAP4
+ * sequence, they are needed.
+ *
+ * Must be called only after all of the SoC clockdomains are
+ * registered, since the function will resolve autodep clockdomain
+ * names into clockdomain pointers.
+ *
+ * The struct clkdm_autodep @ia array must be static, as this function
+ * does not copy the array elements.
+ *
+ * Returns -EACCES if called before any clockdomains have been
+ * registered, -EINVAL if called with a null @ia argument, -EEXIST if
+ * autodeps have already been registered, or 0 upon success.
+ */
+int clkdm_register_autodeps(struct clkdm_autodep *ia)
+{
+ struct clkdm_autodep *a = NULL;
+
+ if (list_empty(&clkdm_list))
+ return -EACCES;
+
+ if (!ia)
+ return -EINVAL;
+
if (autodeps)
- for (autodep = autodeps; autodep->clkdm.ptr; autodep++)
- _autodep_lookup(autodep);
+ return -EEXIST;
- /*
- * Put all clockdomains into software-supervised mode; PM code
- * should later enable hardware-supervised mode as appropriate
- */
+ autodeps = ia;
+ for (a = autodeps; a->clkdm.ptr; a++)
+ _autodep_lookup(a);
+
+ return 0;
+}
+
+/**
+ * clkdm_complete_init - set up the clockdomain layer
+ *
+ * Put all clockdomains into software-supervised mode; PM code should
+ * later enable hardware-supervised mode as appropriate. Must be
+ * called after clkdm_register_clkdms(). Returns -EACCES if called
+ * before clkdm_register_clkdms(), or 0 upon success.
+ */
+int clkdm_complete_init(void)
+{
+ struct clockdomain *clkdm;
+
+ if (list_empty(&clkdm_list))
+ return -EACCES;
+
list_for_each_entry(clkdm, &clkdm_list, node) {
if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
clkdm_wakeup(clkdm);
@@ -306,6 +359,8 @@
_resolve_clkdm_deps(clkdm, clkdm->sleepdep_srcs);
clkdm_clear_all_sleepdeps(clkdm);
}
+
+ return 0;
}
/**
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 1e50c88..f7b5860 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -45,7 +45,6 @@
/**
* struct clkdm_autodep - clkdm deps to add when entering/exiting hwsup mode
* @clkdm: clockdomain to add wkdep+sleepdep on - set name member only
- * @omap_chip: OMAP chip types that this autodep is valid on
*
* A clockdomain that should have wkdeps and sleepdeps added when a
* clockdomain should stay active in hwsup mode; and conversely,
@@ -60,14 +59,12 @@
const char *name;
struct clockdomain *ptr;
} clkdm;
- const struct omap_chip_id omap_chip;
};
/**
* struct clkdm_dep - encode dependencies between clockdomains
* @clkdm_name: clockdomain name
* @clkdm: pointer to the struct clockdomain of @clkdm_name
- * @omap_chip: OMAP chip types that this dependency is valid on
* @wkdep_usecount: Number of wakeup dependencies causing this clkdm to wake
* @sleepdep_usecount: Number of sleep deps that could prevent clkdm from idle
*
@@ -81,7 +78,6 @@
struct clockdomain *clkdm;
atomic_t wkdep_usecount;
atomic_t sleepdep_usecount;
- const struct omap_chip_id omap_chip;
};
/* Possible flags for struct clockdomain._flags */
@@ -101,7 +97,6 @@
* @clkdm_offs: (OMAP4 only) CM clockdomain register offset
* @wkdep_srcs: Clockdomains that can be told to wake this powerdomain up
* @sleepdep_srcs: Clockdomains that can be told to keep this clkdm from inact
- * @omap_chip: OMAP chip types that this clockdomain is valid on
* @usecount: Usecount tracking
* @node: list_head to link all clockdomains together
*
@@ -126,7 +121,6 @@
const u16 clkdm_offs;
struct clkdm_dep *wkdep_srcs;
struct clkdm_dep *sleepdep_srcs;
- const struct omap_chip_id omap_chip;
atomic_t usecount;
struct list_head node;
spinlock_t lock;
@@ -166,8 +160,11 @@
int (*clkdm_clk_disable)(struct clockdomain *clkdm);
};
-void clkdm_init(struct clockdomain **clkdms, struct clkdm_autodep *autodeps,
- struct clkdm_ops *custom_funcs);
+int clkdm_register_platform_funcs(struct clkdm_ops *co);
+int clkdm_register_autodeps(struct clkdm_autodep *ia);
+int clkdm_register_clkdms(struct clockdomain **c);
+int clkdm_complete_init(void);
+
struct clockdomain *clkdm_lookup(const char *name);
int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
@@ -195,7 +192,8 @@
int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh);
int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh);
-extern void __init omap2xxx_clockdomains_init(void);
+extern void __init omap242x_clockdomains_init(void);
+extern void __init omap243x_clockdomains_init(void);
extern void __init omap3xxx_clockdomains_init(void);
extern void __init omap44xx_clockdomains_init(void);
extern void _clkdm_add_autodeps(struct clockdomain *clkdm);
@@ -205,4 +203,10 @@
extern struct clkdm_ops omap3_clkdm_operations;
extern struct clkdm_ops omap4_clkdm_operations;
+extern struct clkdm_dep gfx_24xx_wkdeps[];
+extern struct clkdm_dep dsp_24xx_wkdeps[];
+extern struct clockdomain wkup_common_clkdm;
+extern struct clockdomain prm_common_clkdm;
+extern struct clockdomain cm_common_clkdm;
+
#endif
diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
index f740edb..a0d68db 100644
--- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
@@ -52,8 +52,6 @@
u32 mask = 0;
for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
if (!cd->clkdm)
continue; /* only happens if data is erroneous */
@@ -98,8 +96,6 @@
u32 mask = 0;
for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
if (!cd->clkdm)
continue; /* only happens if data is erroneous */
diff --git a/arch/arm/mach-omap2/clockdomain44xx.c b/arch/arm/mach-omap2/clockdomain44xx.c
index b43706a..935c7f0 100644
--- a/arch/arm/mach-omap2/clockdomain44xx.c
+++ b/arch/arm/mach-omap2/clockdomain44xx.c
@@ -52,8 +52,6 @@
u32 mask = 0;
for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
if (!cd->clkdm)
continue; /* only happens if data is erroneous */
diff --git a/arch/arm/mach-omap2/clockdomains2420_data.c b/arch/arm/mach-omap2/clockdomains2420_data.c
new file mode 100644
index 0000000..0ab8e46
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains2420_data.c
@@ -0,0 +1,154 @@
+/*
+ * OMAP2420 clockdomains
+ *
+ * Copyright (C) 2008-2011 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Paul Walmsley, Jouni Högander
+ *
+ * This file contains clockdomains and clockdomain wakeup dependencies
+ * for OMAP2420 chips. Some notes:
+ *
+ * A useful validation rule for struct clockdomain: Any clockdomain
+ * referenced by a wkdep_srcs must have a dep_bit assigned. So
+ * wkdep_srcs are really just software-controllable dependencies.
+ * Non-software-controllable dependencies do exist, but they are not
+ * encoded below (yet).
+ *
+ * 24xx does not support programmable sleep dependencies (SLEEPDEP)
+ *
+ * The overly-specific dep_bit names are due to a bit name collision
+ * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
+ * value are the same for all powerdomains: 2
+ *
+ * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
+ * sanity check?
+ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
+ */
+
+/*
+ * To-Do List
+ * -> Port the Sleep/Wakeup dependencies for the domains
+ * from the Power domain framework
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-24xx.h"
+#include "prm-regbits-24xx.h"
+
+/*
+ * Clockdomain dependencies for wkdeps
+ *
+ * XXX Hardware dependencies (e.g., dependencies that cannot be
+ * changed in software) are not included here yet, but should be.
+ */
+
+/* Wakeup dependency source arrays */
+
+/* 2420-specific possible wakeup dependencies */
+
+/* 2420 PM_WKDEP_MPU: CORE, DSP, WKUP */
+static struct clkdm_dep mpu_2420_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "dsp_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/* 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP */
+static struct clkdm_dep core_2420_wkdeps[] = {
+ { .clkdm_name = "dsp_clkdm" },
+ { .clkdm_name = "gfx_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/*
+ * 2420-only clockdomains
+ */
+
+static struct clockdomain mpu_2420_clkdm = {
+ .name = "mpu_clkdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .wkdep_srcs = mpu_2420_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
+};
+
+static struct clockdomain iva1_2420_clkdm = {
+ .name = "iva1_clkdm",
+ .pwrdm = { .name = "dsp_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
+ .wkdep_srcs = dsp_24xx_wkdeps,
+ .clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK,
+};
+
+static struct clockdomain dsp_2420_clkdm = {
+ .name = "dsp_clkdm",
+ .pwrdm = { .name = "dsp_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
+};
+
+static struct clockdomain gfx_2420_clkdm = {
+ .name = "gfx_clkdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = gfx_24xx_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
+};
+
+static struct clockdomain core_l3_2420_clkdm = {
+ .name = "core_l3_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .wkdep_srcs = core_2420_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
+};
+
+static struct clockdomain core_l4_2420_clkdm = {
+ .name = "core_l4_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .wkdep_srcs = core_2420_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
+};
+
+static struct clockdomain dss_2420_clkdm = {
+ .name = "dss_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
+};
+
+static struct clockdomain *clockdomains_omap242x[] __initdata = {
+ &wkup_common_clkdm,
+ &cm_common_clkdm,
+ &prm_common_clkdm,
+ &mpu_2420_clkdm,
+ &iva1_2420_clkdm,
+ &dsp_2420_clkdm,
+ &gfx_2420_clkdm,
+ &core_l3_2420_clkdm,
+ &core_l4_2420_clkdm,
+ &dss_2420_clkdm,
+ NULL,
+};
+
+void __init omap242x_clockdomains_init(void)
+{
+ if (!cpu_is_omap242x())
+ return;
+
+ clkdm_register_platform_funcs(&omap2_clkdm_operations);
+ clkdm_register_clkdms(clockdomains_omap242x);
+ clkdm_complete_init();
+}
diff --git a/arch/arm/mach-omap2/clockdomains2430_data.c b/arch/arm/mach-omap2/clockdomains2430_data.c
new file mode 100644
index 0000000..3645ed0
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains2430_data.c
@@ -0,0 +1,181 @@
+/*
+ * OMAP2xxx clockdomains
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Paul Walmsley, Jouni Högander
+ *
+ * This file contains clockdomains and clockdomain wakeup dependencies
+ * for OMAP2xxx chips. Some notes:
+ *
+ * A useful validation rule for struct clockdomain: Any clockdomain
+ * referenced by a wkdep_srcs must have a dep_bit assigned. So
+ * wkdep_srcs are really just software-controllable dependencies.
+ * Non-software-controllable dependencies do exist, but they are not
+ * encoded below (yet).
+ *
+ * 24xx does not support programmable sleep dependencies (SLEEPDEP)
+ *
+ * The overly-specific dep_bit names are due to a bit name collision
+ * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
+ * value are the same for all powerdomains: 2
+ *
+ * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
+ * sanity check?
+ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
+ */
+
+/*
+ * To-Do List
+ * -> Port the Sleep/Wakeup dependencies for the domains
+ * from the Power domain framework
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-24xx.h"
+#include "prm-regbits-24xx.h"
+
+/*
+ * Clockdomain dependencies for wkdeps
+ *
+ * XXX Hardware dependencies (e.g., dependencies that cannot be
+ * changed in software) are not included here yet, but should be.
+ */
+
+/* Wakeup dependency source arrays */
+
+/* 2430-specific possible wakeup dependencies */
+
+/* 2430 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP, MDM */
+static struct clkdm_dep core_2430_wkdeps[] = {
+ { .clkdm_name = "dsp_clkdm" },
+ { .clkdm_name = "gfx_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { .clkdm_name = "mdm_clkdm" },
+ { NULL },
+};
+
+/* 2430 PM_WKDEP_MPU: CORE, DSP, WKUP, MDM */
+static struct clkdm_dep mpu_2430_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "dsp_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { .clkdm_name = "mdm_clkdm" },
+ { NULL },
+};
+
+/* 2430 PM_WKDEP_MDM: CORE, MPU, WKUP */
+static struct clkdm_dep mdm_2430_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/*
+ * 2430-only clockdomains
+ */
+
+static struct clockdomain mpu_2430_clkdm = {
+ .name = "mpu_clkdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = mpu_2430_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
+};
+
+/* Another case of bit name collisions between several registers: EN_MDM */
+static struct clockdomain mdm_clkdm = {
+ .name = "mdm_clkdm",
+ .pwrdm = { .name = "mdm_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT,
+ .wkdep_srcs = mdm_2430_wkdeps,
+ .clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK,
+};
+
+static struct clockdomain dsp_2430_clkdm = {
+ .name = "dsp_clkdm",
+ .pwrdm = { .name = "dsp_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
+ .wkdep_srcs = dsp_24xx_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
+};
+
+static struct clockdomain gfx_2430_clkdm = {
+ .name = "gfx_clkdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = gfx_24xx_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l3_2430_clkdm = {
+ .name = "core_l3_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .dep_bit = OMAP24XX_EN_CORE_SHIFT,
+ .wkdep_srcs = core_2430_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l4_2430_clkdm = {
+ .name = "core_l4_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .dep_bit = OMAP24XX_EN_CORE_SHIFT,
+ .wkdep_srcs = core_2430_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
+};
+
+static struct clockdomain dss_2430_clkdm = {
+ .name = "dss_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
+};
+
+static struct clockdomain *clockdomains_omap243x[] __initdata = {
+ &wkup_common_clkdm,
+ &cm_common_clkdm,
+ &prm_common_clkdm,
+ &mpu_2430_clkdm,
+ &mdm_clkdm,
+ &dsp_2430_clkdm,
+ &gfx_2430_clkdm,
+ &core_l3_2430_clkdm,
+ &core_l4_2430_clkdm,
+ &dss_2430_clkdm,
+ NULL,
+};
+
+void __init omap243x_clockdomains_init(void)
+{
+ if (!cpu_is_omap243x())
+ return;
+
+ clkdm_register_platform_funcs(&omap2_clkdm_operations);
+ clkdm_register_clkdms(clockdomains_omap243x);
+ clkdm_complete_init();
+}
+
diff --git a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
index 13bde95..0a6a048 100644
--- a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
+++ b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
@@ -1,7 +1,7 @@
/*
- * OMAP2/3 clockdomains
+ * OMAP2/3 clockdomain common data
*
- * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2011 Texas Instruments, Inc.
* Copyright (C) 2008-2010 Nokia Corporation
*
* Paul Walmsley, Jouni Högander
@@ -51,374 +51,28 @@
* changed in software) are not included here yet, but should be.
*/
-/* OMAP2/3-common wakeup dependencies */
-
-/*
- * 2420/2430 PM_WKDEP_GFX: CORE, MPU, WKUP
- * 3430ES1 PM_WKDEP_GFX: adds IVA2, removes CORE
- * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE
- * These can share data since they will never be present simultaneously
- * on the same device.
- */
-static struct clkdm_dep gfx_sgx_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
- CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
- CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-
-/* 24XX-specific possible dependencies */
-
-#ifdef CONFIG_ARCH_OMAP2
-
/* Wakeup dependency source arrays */
-/* 2420/2430 PM_WKDEP_DSP: CORE, MPU, WKUP */
-static struct clkdm_dep dsp_24xx_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
+/* 2xxx-specific possible dependencies */
+
+/* 2xxx PM_WKDEP_GFX: CORE, MPU, WKUP */
+struct clkdm_dep gfx_24xx_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
{ NULL },
};
-/*
- * 2420 PM_WKDEP_MPU: CORE, DSP, WKUP
- * 2430 adds MDM
- */
-static struct clkdm_dep mpu_24xx_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "dsp_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "mdm_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
- },
+/* 2xxx PM_WKDEP_DSP: CORE, MPU, WKUP */
+struct clkdm_dep dsp_24xx_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
{ NULL },
};
-/*
- * 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP
- * 2430 adds MDM
- */
-static struct clkdm_dep core_24xx_wkdeps[] = {
- {
- .clkdm_name = "dsp_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "gfx_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "mdm_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
- },
- { NULL },
-};
-
-#endif /* CONFIG_ARCH_OMAP2 */
-
-/* 2430-specific possible wakeup dependencies */
-
-#ifdef CONFIG_SOC_OMAP2430
-
-/* 2430 PM_WKDEP_MDM: CORE, MPU, WKUP */
-static struct clkdm_dep mdm_2430_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- { NULL },
-};
-
-#endif /* CONFIG_SOC_OMAP2430 */
-
-
-/* OMAP3-specific possible dependencies */
-
-#ifdef CONFIG_ARCH_OMAP3
-
-/* 3430: PM_WKDEP_PER: CORE, IVA2, MPU, WKUP */
-static struct clkdm_dep per_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430ES2: PM_WKDEP_USBHOST: CORE, IVA2, MPU, WKUP */
-static struct clkdm_dep usbhost_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER */
-static struct clkdm_dep mpu_3xxx_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "dss_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER */
-static struct clkdm_dep iva2_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "dss_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-
-/* 3430 PM_WKDEP_CAM: IVA2, MPU, WKUP */
-static struct clkdm_dep cam_wkdeps[] = {
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430 PM_WKDEP_DSS: IVA2, MPU, WKUP */
-static struct clkdm_dep dss_wkdeps[] = {
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430: PM_WKDEP_NEON: MPU */
-static struct clkdm_dep neon_wkdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-
-/* Sleep dependency source arrays for OMAP3-specific clkdms */
-
-/* 3430: CM_SLEEPDEP_DSS: MPU, IVA */
-static struct clkdm_dep dss_sleepdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430: CM_SLEEPDEP_PER: MPU, IVA */
-static struct clkdm_dep per_sleepdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA */
-static struct clkdm_dep usbhost_sleepdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430: CM_SLEEPDEP_CAM: MPU */
-static struct clkdm_dep cam_sleepdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/*
- * 3430ES1: CM_SLEEPDEP_GFX: MPU
- * 3430ES2: CM_SLEEPDEP_SGX: MPU
- * These can share data since they will never be present simultaneously
- * on the same device.
- */
-static struct clkdm_dep gfx_sgx_sleepdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-#endif /* CONFIG_ARCH_OMAP3 */
-
/*
* OMAP2/3-common clockdomains
@@ -430,439 +84,18 @@
*/
/* This is an implicit clockdomain - it is never defined as such in TRM */
-static struct clockdomain wkup_clkdm = {
+struct clockdomain wkup_common_clkdm = {
.name = "wkup_clkdm",
.pwrdm = { .name = "wkup_pwrdm" },
.dep_bit = OMAP_EN_WKUP_SHIFT,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
};
-static struct clockdomain prm_clkdm = {
+struct clockdomain prm_common_clkdm = {
.name = "prm_clkdm",
.pwrdm = { .name = "wkup_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
};
-static struct clockdomain cm_clkdm = {
+struct clockdomain cm_common_clkdm = {
.name = "cm_clkdm",
.pwrdm = { .name = "core_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
};
-
-/*
- * 2420-only clockdomains
- */
-
-#if defined(CONFIG_SOC_OMAP2420)
-
-static struct clockdomain mpu_2420_clkdm = {
- .name = "mpu_clkdm",
- .pwrdm = { .name = "mpu_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .wkdep_srcs = mpu_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain iva1_2420_clkdm = {
- .name = "iva1_clkdm",
- .pwrdm = { .name = "dsp_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
- .wkdep_srcs = dsp_24xx_wkdeps,
- .clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain dsp_2420_clkdm = {
- .name = "dsp_clkdm",
- .pwrdm = { .name = "dsp_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain gfx_2420_clkdm = {
- .name = "gfx_clkdm",
- .pwrdm = { .name = "gfx_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = gfx_sgx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain core_l3_2420_clkdm = {
- .name = "core_l3_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .wkdep_srcs = core_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain core_l4_2420_clkdm = {
- .name = "core_l4_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .wkdep_srcs = core_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain dss_2420_clkdm = {
- .name = "dss_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-#endif /* CONFIG_SOC_OMAP2420 */
-
-
-/*
- * 2430-only clockdomains
- */
-
-#if defined(CONFIG_SOC_OMAP2430)
-
-static struct clockdomain mpu_2430_clkdm = {
- .name = "mpu_clkdm",
- .pwrdm = { .name = "mpu_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = mpu_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-/* Another case of bit name collisions between several registers: EN_MDM */
-static struct clockdomain mdm_clkdm = {
- .name = "mdm_clkdm",
- .pwrdm = { .name = "mdm_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT,
- .wkdep_srcs = mdm_2430_wkdeps,
- .clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-static struct clockdomain dsp_2430_clkdm = {
- .name = "dsp_clkdm",
- .pwrdm = { .name = "dsp_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
- .wkdep_srcs = dsp_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-static struct clockdomain gfx_2430_clkdm = {
- .name = "gfx_clkdm",
- .pwrdm = { .name = "gfx_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = gfx_sgx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l3_2430_clkdm = {
- .name = "core_l3_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .dep_bit = OMAP24XX_EN_CORE_SHIFT,
- .wkdep_srcs = core_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l4_2430_clkdm = {
- .name = "core_l4_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .dep_bit = OMAP24XX_EN_CORE_SHIFT,
- .wkdep_srcs = core_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-static struct clockdomain dss_2430_clkdm = {
- .name = "dss_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-#endif /* CONFIG_SOC_OMAP2430 */
-
-
-/*
- * OMAP3 clockdomains
- */
-
-#if defined(CONFIG_ARCH_OMAP3)
-
-static struct clockdomain mpu_3xxx_clkdm = {
- .name = "mpu_clkdm",
- .pwrdm = { .name = "mpu_pwrdm" },
- .flags = CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP,
- .dep_bit = OMAP3430_EN_MPU_SHIFT,
- .wkdep_srcs = mpu_3xxx_wkdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain neon_clkdm = {
- .name = "neon_clkdm",
- .pwrdm = { .name = "neon_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = neon_wkdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain iva2_clkdm = {
- .name = "iva2_clkdm",
- .pwrdm = { .name = "iva2_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT,
- .wkdep_srcs = iva2_wkdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain gfx_3430es1_clkdm = {
- .name = "gfx_clkdm",
- .pwrdm = { .name = "gfx_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = gfx_sgx_wkdeps,
- .sleepdep_srcs = gfx_sgx_sleepdeps,
- .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1),
-};
-
-static struct clockdomain sgx_clkdm = {
- .name = "sgx_clkdm",
- .pwrdm = { .name = "sgx_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = gfx_sgx_wkdeps,
- .sleepdep_srcs = gfx_sgx_sleepdeps,
- .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
-};
-
-/*
- * The die-to-die clockdomain was documented in the 34xx ES1 TRM, but
- * then that information was removed from the 34xx ES2+ TRM. It is
- * unclear whether the core is still there, but the clockdomain logic
- * is there, and must be programmed to an appropriate state if the
- * CORE clockdomain is to become inactive.
- */
-static struct clockdomain d2d_clkdm = {
- .name = "d2d_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l3_3xxx_clkdm = {
- .name = "core_l3_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .dep_bit = OMAP3430_EN_CORE_SHIFT,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l4_3xxx_clkdm = {
- .name = "core_l4_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .dep_bit = OMAP3430_EN_CORE_SHIFT,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-/* Another case of bit name collisions between several registers: EN_DSS */
-static struct clockdomain dss_3xxx_clkdm = {
- .name = "dss_clkdm",
- .pwrdm = { .name = "dss_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT,
- .wkdep_srcs = dss_wkdeps,
- .sleepdep_srcs = dss_sleepdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain cam_clkdm = {
- .name = "cam_clkdm",
- .pwrdm = { .name = "cam_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = cam_wkdeps,
- .sleepdep_srcs = cam_sleepdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain usbhost_clkdm = {
- .name = "usbhost_clkdm",
- .pwrdm = { .name = "usbhost_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = usbhost_wkdeps,
- .sleepdep_srcs = usbhost_sleepdeps,
- .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
-};
-
-static struct clockdomain per_clkdm = {
- .name = "per_clkdm",
- .pwrdm = { .name = "per_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP3430_EN_PER_SHIFT,
- .wkdep_srcs = per_wkdeps,
- .sleepdep_srcs = per_sleepdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-/*
- * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is
- * switched of even if sdti is in use
- */
-static struct clockdomain emu_clkdm = {
- .name = "emu_clkdm",
- .pwrdm = { .name = "emu_pwrdm" },
- .flags = /* CLKDM_CAN_ENABLE_AUTO | */CLKDM_CAN_SWSUP,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain dpll1_clkdm = {
- .name = "dpll1_clkdm",
- .pwrdm = { .name = "dpll1_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain dpll2_clkdm = {
- .name = "dpll2_clkdm",
- .pwrdm = { .name = "dpll2_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain dpll3_clkdm = {
- .name = "dpll3_clkdm",
- .pwrdm = { .name = "dpll3_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain dpll4_clkdm = {
- .name = "dpll4_clkdm",
- .pwrdm = { .name = "dpll4_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain dpll5_clkdm = {
- .name = "dpll5_clkdm",
- .pwrdm = { .name = "dpll5_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
-};
-
-#endif /* CONFIG_ARCH_OMAP3 */
-
-/*
- * Clockdomain hwsup dependencies (OMAP3 only)
- */
-
-static struct clkdm_autodep clkdm_autodeps[] = {
- {
- .clkdm = { .name = "mpu_clkdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm = { .name = "iva2_clkdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm = { .name = NULL },
- }
-};
-
-static struct clockdomain *clockdomains_omap2[] __initdata = {
- &wkup_clkdm,
- &cm_clkdm,
- &prm_clkdm,
-
-#ifdef CONFIG_SOC_OMAP2420
- &mpu_2420_clkdm,
- &iva1_2420_clkdm,
- &dsp_2420_clkdm,
- &gfx_2420_clkdm,
- &core_l3_2420_clkdm,
- &core_l4_2420_clkdm,
- &dss_2420_clkdm,
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
- &mpu_2430_clkdm,
- &mdm_clkdm,
- &dsp_2430_clkdm,
- &gfx_2430_clkdm,
- &core_l3_2430_clkdm,
- &core_l4_2430_clkdm,
- &dss_2430_clkdm,
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
- &mpu_3xxx_clkdm,
- &neon_clkdm,
- &iva2_clkdm,
- &gfx_3430es1_clkdm,
- &sgx_clkdm,
- &d2d_clkdm,
- &core_l3_3xxx_clkdm,
- &core_l4_3xxx_clkdm,
- &dss_3xxx_clkdm,
- &cam_clkdm,
- &usbhost_clkdm,
- &per_clkdm,
- &emu_clkdm,
- &dpll1_clkdm,
- &dpll2_clkdm,
- &dpll3_clkdm,
- &dpll4_clkdm,
- &dpll5_clkdm,
-#endif
- NULL,
-};
-
-void __init omap2xxx_clockdomains_init(void)
-{
- clkdm_init(clockdomains_omap2, clkdm_autodeps, &omap2_clkdm_operations);
-}
-
-void __init omap3xxx_clockdomains_init(void)
-{
- clkdm_init(clockdomains_omap2, clkdm_autodeps, &omap3_clkdm_operations);
-}
diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c
new file mode 100644
index 0000000..b84e138
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c
@@ -0,0 +1,398 @@
+/*
+ * OMAP3xxx clockdomains
+ *
+ * Copyright (C) 2008-2011 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Paul Walmsley, Jouni Högander
+ *
+ * This file contains clockdomains and clockdomain wakeup/sleep
+ * dependencies for the OMAP3xxx chips. Some notes:
+ *
+ * A useful validation rule for struct clockdomain: Any clockdomain
+ * referenced by a wkdep_srcs or sleepdep_srcs array must have a
+ * dep_bit assigned. So wkdep_srcs/sleepdep_srcs are really just
+ * software-controllable dependencies. Non-software-controllable
+ * dependencies do exist, but they are not encoded below (yet).
+ *
+ * The overly-specific dep_bit names are due to a bit name collision
+ * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
+ * value are the same for all powerdomains: 2
+ *
+ * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
+ * sanity check?
+ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
+ */
+
+/*
+ * To-Do List
+ * -> Port the Sleep/Wakeup dependencies for the domains
+ * from the Power domain framework
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-34xx.h"
+#include "prm-regbits-34xx.h"
+
+/*
+ * Clockdomain dependencies for wkdeps/sleepdeps
+ *
+ * XXX Hardware dependencies (e.g., dependencies that cannot be
+ * changed in software) are not included here yet, but should be.
+ */
+
+/* OMAP3-specific possible dependencies */
+
+/*
+ * 3430ES1 PM_WKDEP_GFX: adds IVA2, removes CORE
+ * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE
+ */
+static struct clkdm_dep gfx_sgx_3xxx_wkdeps[] = {
+ { .clkdm_name = "iva2_clkdm", },
+ { .clkdm_name = "mpu_clkdm", },
+ { .clkdm_name = "wkup_clkdm", },
+ { NULL },
+};
+
+/* 3430: PM_WKDEP_PER: CORE, IVA2, MPU, WKUP */
+static struct clkdm_dep per_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/* 3430ES2: PM_WKDEP_USBHOST: CORE, IVA2, MPU, WKUP */
+static struct clkdm_dep usbhost_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/* 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER */
+static struct clkdm_dep mpu_3xxx_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { .clkdm_name = "dss_clkdm" },
+ { .clkdm_name = "per_clkdm" },
+ { NULL },
+};
+
+/* 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER */
+static struct clkdm_dep iva2_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { .clkdm_name = "dss_clkdm" },
+ { .clkdm_name = "per_clkdm" },
+ { NULL },
+};
+
+/* 3430 PM_WKDEP_CAM: IVA2, MPU, WKUP */
+static struct clkdm_dep cam_wkdeps[] = {
+ { .clkdm_name = "iva2_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/* 3430 PM_WKDEP_DSS: IVA2, MPU, WKUP */
+static struct clkdm_dep dss_wkdeps[] = {
+ { .clkdm_name = "iva2_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/* 3430: PM_WKDEP_NEON: MPU */
+static struct clkdm_dep neon_wkdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { NULL },
+};
+
+/* Sleep dependency source arrays for OMAP3-specific clkdms */
+
+/* 3430: CM_SLEEPDEP_DSS: MPU, IVA */
+static struct clkdm_dep dss_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { NULL },
+};
+
+/* 3430: CM_SLEEPDEP_PER: MPU, IVA */
+static struct clkdm_dep per_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { NULL },
+};
+
+/* 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA */
+static struct clkdm_dep usbhost_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { NULL },
+};
+
+/* 3430: CM_SLEEPDEP_CAM: MPU */
+static struct clkdm_dep cam_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { NULL },
+};
+
+/*
+ * 3430ES1: CM_SLEEPDEP_GFX: MPU
+ * 3430ES2: CM_SLEEPDEP_SGX: MPU
+ * These can share data since they will never be present simultaneously
+ * on the same device.
+ */
+static struct clkdm_dep gfx_sgx_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { NULL },
+};
+
+/*
+ * OMAP3 clockdomains
+ */
+
+static struct clockdomain mpu_3xxx_clkdm = {
+ .name = "mpu_clkdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP,
+ .dep_bit = OMAP3430_EN_MPU_SHIFT,
+ .wkdep_srcs = mpu_3xxx_wkdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK,
+};
+
+static struct clockdomain neon_clkdm = {
+ .name = "neon_clkdm",
+ .pwrdm = { .name = "neon_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = neon_wkdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK,
+};
+
+static struct clockdomain iva2_clkdm = {
+ .name = "iva2_clkdm",
+ .pwrdm = { .name = "iva2_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT,
+ .wkdep_srcs = iva2_wkdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK,
+};
+
+static struct clockdomain gfx_3430es1_clkdm = {
+ .name = "gfx_clkdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = gfx_sgx_3xxx_wkdeps,
+ .sleepdep_srcs = gfx_sgx_sleepdeps,
+ .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK,
+};
+
+static struct clockdomain sgx_clkdm = {
+ .name = "sgx_clkdm",
+ .pwrdm = { .name = "sgx_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = gfx_sgx_3xxx_wkdeps,
+ .sleepdep_srcs = gfx_sgx_sleepdeps,
+ .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
+};
+
+/*
+ * The die-to-die clockdomain was documented in the 34xx ES1 TRM, but
+ * then that information was removed from the 34xx ES2+ TRM. It is
+ * unclear whether the core is still there, but the clockdomain logic
+ * is there, and must be programmed to an appropriate state if the
+ * CORE clockdomain is to become inactive.
+ */
+static struct clockdomain d2d_clkdm = {
+ .name = "d2d_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l3_3xxx_clkdm = {
+ .name = "core_l3_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .dep_bit = OMAP3430_EN_CORE_SHIFT,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l4_3xxx_clkdm = {
+ .name = "core_l4_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .dep_bit = OMAP3430_EN_CORE_SHIFT,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK,
+};
+
+/* Another case of bit name collisions between several registers: EN_DSS */
+static struct clockdomain dss_3xxx_clkdm = {
+ .name = "dss_clkdm",
+ .pwrdm = { .name = "dss_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT,
+ .wkdep_srcs = dss_wkdeps,
+ .sleepdep_srcs = dss_sleepdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK,
+};
+
+static struct clockdomain cam_clkdm = {
+ .name = "cam_clkdm",
+ .pwrdm = { .name = "cam_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = cam_wkdeps,
+ .sleepdep_srcs = cam_sleepdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK,
+};
+
+static struct clockdomain usbhost_clkdm = {
+ .name = "usbhost_clkdm",
+ .pwrdm = { .name = "usbhost_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = usbhost_wkdeps,
+ .sleepdep_srcs = usbhost_sleepdeps,
+ .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
+};
+
+static struct clockdomain per_clkdm = {
+ .name = "per_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP3430_EN_PER_SHIFT,
+ .wkdep_srcs = per_wkdeps,
+ .sleepdep_srcs = per_sleepdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
+};
+
+/*
+ * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is
+ * switched of even if sdti is in use
+ */
+static struct clockdomain emu_clkdm = {
+ .name = "emu_clkdm",
+ .pwrdm = { .name = "emu_pwrdm" },
+ .flags = /* CLKDM_CAN_ENABLE_AUTO | */CLKDM_CAN_SWSUP,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
+};
+
+static struct clockdomain dpll1_clkdm = {
+ .name = "dpll1_clkdm",
+ .pwrdm = { .name = "dpll1_pwrdm" },
+};
+
+static struct clockdomain dpll2_clkdm = {
+ .name = "dpll2_clkdm",
+ .pwrdm = { .name = "dpll2_pwrdm" },
+};
+
+static struct clockdomain dpll3_clkdm = {
+ .name = "dpll3_clkdm",
+ .pwrdm = { .name = "dpll3_pwrdm" },
+};
+
+static struct clockdomain dpll4_clkdm = {
+ .name = "dpll4_clkdm",
+ .pwrdm = { .name = "dpll4_pwrdm" },
+};
+
+static struct clockdomain dpll5_clkdm = {
+ .name = "dpll5_clkdm",
+ .pwrdm = { .name = "dpll5_pwrdm" },
+};
+
+/*
+ * Clockdomain hwsup dependencies
+ */
+
+static struct clkdm_autodep clkdm_autodeps[] = {
+ {
+ .clkdm = { .name = "mpu_clkdm" },
+ },
+ {
+ .clkdm = { .name = "iva2_clkdm" },
+ },
+ {
+ .clkdm = { .name = NULL },
+ }
+};
+
+/*
+ *
+ */
+
+static struct clockdomain *clockdomains_omap3430_common[] __initdata = {
+ &wkup_common_clkdm,
+ &cm_common_clkdm,
+ &prm_common_clkdm,
+ &mpu_3xxx_clkdm,
+ &neon_clkdm,
+ &iva2_clkdm,
+ &d2d_clkdm,
+ &core_l3_3xxx_clkdm,
+ &core_l4_3xxx_clkdm,
+ &dss_3xxx_clkdm,
+ &cam_clkdm,
+ &per_clkdm,
+ &emu_clkdm,
+ &dpll1_clkdm,
+ &dpll2_clkdm,
+ &dpll3_clkdm,
+ &dpll4_clkdm,
+ NULL
+};
+
+static struct clockdomain *clockdomains_omap3430es1[] __initdata = {
+ &gfx_3430es1_clkdm,
+ NULL,
+};
+
+static struct clockdomain *clockdomains_omap3430es2plus[] __initdata = {
+ &sgx_clkdm,
+ &dpll5_clkdm,
+ &usbhost_clkdm,
+ NULL,
+};
+
+void __init omap3xxx_clockdomains_init(void)
+{
+ struct clockdomain **sc;
+
+ if (!cpu_is_omap34xx())
+ return;
+
+ clkdm_register_platform_funcs(&omap3_clkdm_operations);
+ clkdm_register_clkdms(clockdomains_omap3430_common);
+
+ sc = (omap_rev() == OMAP3430_REV_ES1_0) ? clockdomains_omap3430es1 :
+ clockdomains_omap3430es2plus;
+
+ clkdm_register_clkdms(sc);
+
+ clkdm_register_autodeps(clkdm_autodeps);
+ clkdm_complete_init();
+}
diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c
index dccc651..9299ac2 100644
--- a/arch/arm/mach-omap2/clockdomains44xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains44xx_data.c
@@ -34,350 +34,122 @@
/* Static Dependencies for OMAP4 Clock Domains */
static struct clkdm_dep d2d_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_init_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_2_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l3_init_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
{ NULL },
};
static struct clkdm_dep ducati_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_dss_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_gfx_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_init_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_secure_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "tesla_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_2_clkdm" },
+ { .clkdm_name = "l3_dss_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l3_gfx_clkdm" },
+ { .clkdm_name = "l3_init_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
+ { .clkdm_name = "l4_secure_clkdm" },
+ { .clkdm_name = "l4_wkup_clkdm" },
+ { .clkdm_name = "tesla_clkdm" },
{ NULL },
};
static struct clkdm_dep iss_wkup_sleep_deps[] = {
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
{ NULL },
};
static struct clkdm_dep ivahd_wkup_sleep_deps[] = {
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
{ NULL },
};
static struct clkdm_dep l3_dma_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ducati_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_dss_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_init_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_secure_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ducati_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_dss_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l3_init_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
+ { .clkdm_name = "l4_secure_clkdm" },
+ { .clkdm_name = "l4_wkup_clkdm" },
{ NULL },
};
static struct clkdm_dep l3_dss_wkup_sleep_deps[] = {
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_2_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
{ NULL },
};
static struct clkdm_dep l3_gfx_wkup_sleep_deps[] = {
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
{ NULL },
};
static struct clkdm_dep l3_init_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_secure_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
+ { .clkdm_name = "l4_secure_clkdm" },
+ { .clkdm_name = "l4_wkup_clkdm" },
{ NULL },
};
static struct clkdm_dep l4_secure_wkup_sleep_deps[] = {
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
{ NULL },
};
static struct clkdm_dep mpu_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ducati_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_dss_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_gfx_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_init_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_secure_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "tesla_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ducati_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_2_clkdm" },
+ { .clkdm_name = "l3_dss_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l3_gfx_clkdm" },
+ { .clkdm_name = "l3_init_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
+ { .clkdm_name = "l4_secure_clkdm" },
+ { .clkdm_name = "l4_wkup_clkdm" },
+ { .clkdm_name = "tesla_clkdm" },
{ NULL },
};
static struct clkdm_dep tesla_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_init_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_2_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l3_init_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
+ { .clkdm_name = "l4_wkup_clkdm" },
{ NULL },
};
@@ -388,7 +160,6 @@
.cm_inst = OMAP4430_CM2_CEFUSE_INST,
.clkdm_offs = OMAP4430_CM2_CEFUSE_CEFUSE_CDOFFS,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l4_cfg_44xx_clkdm = {
@@ -399,7 +170,6 @@
.clkdm_offs = OMAP4430_CM2_CORE_L4CFG_CDOFFS,
.dep_bit = OMAP4430_L4CFG_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain tesla_44xx_clkdm = {
@@ -412,7 +182,6 @@
.wkdep_srcs = tesla_wkup_sleep_deps,
.sleepdep_srcs = tesla_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_gfx_44xx_clkdm = {
@@ -425,7 +194,6 @@
.wkdep_srcs = l3_gfx_wkup_sleep_deps,
.sleepdep_srcs = l3_gfx_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain ivahd_44xx_clkdm = {
@@ -438,7 +206,6 @@
.wkdep_srcs = ivahd_wkup_sleep_deps,
.sleepdep_srcs = ivahd_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l4_secure_44xx_clkdm = {
@@ -451,7 +218,6 @@
.wkdep_srcs = l4_secure_wkup_sleep_deps,
.sleepdep_srcs = l4_secure_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l4_per_44xx_clkdm = {
@@ -462,7 +228,6 @@
.clkdm_offs = OMAP4430_CM2_L4PER_L4PER_CDOFFS,
.dep_bit = OMAP4430_L4PER_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain abe_44xx_clkdm = {
@@ -473,7 +238,6 @@
.clkdm_offs = OMAP4430_CM1_ABE_ABE_CDOFFS,
.dep_bit = OMAP4430_ABE_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_instr_44xx_clkdm = {
@@ -482,7 +246,6 @@
.prcm_partition = OMAP4430_CM2_PARTITION,
.cm_inst = OMAP4430_CM2_CORE_INST,
.clkdm_offs = OMAP4430_CM2_CORE_L3INSTR_CDOFFS,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_init_44xx_clkdm = {
@@ -495,7 +258,6 @@
.wkdep_srcs = l3_init_wkup_sleep_deps,
.sleepdep_srcs = l3_init_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain d2d_44xx_clkdm = {
@@ -507,7 +269,6 @@
.wkdep_srcs = d2d_wkup_sleep_deps,
.sleepdep_srcs = d2d_wkup_sleep_deps,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain mpu0_44xx_clkdm = {
@@ -517,7 +278,6 @@
.cm_inst = OMAP4430_PRCM_MPU_CPU0_INST,
.clkdm_offs = OMAP4430_PRCM_MPU_CPU0_CPU0_CDOFFS,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain mpu1_44xx_clkdm = {
@@ -527,7 +287,6 @@
.cm_inst = OMAP4430_PRCM_MPU_CPU1_INST,
.clkdm_offs = OMAP4430_PRCM_MPU_CPU1_CPU1_CDOFFS,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_emif_44xx_clkdm = {
@@ -538,7 +297,6 @@
.clkdm_offs = OMAP4430_CM2_CORE_MEMIF_CDOFFS,
.dep_bit = OMAP4430_MEMIF_STATDEP_SHIFT,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l4_ao_44xx_clkdm = {
@@ -548,7 +306,6 @@
.cm_inst = OMAP4430_CM2_ALWAYS_ON_INST,
.clkdm_offs = OMAP4430_CM2_ALWAYS_ON_ALWON_CDOFFS,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain ducati_44xx_clkdm = {
@@ -561,7 +318,6 @@
.wkdep_srcs = ducati_wkup_sleep_deps,
.sleepdep_srcs = ducati_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain mpu_44xx_clkdm = {
@@ -573,7 +329,6 @@
.wkdep_srcs = mpu_wkup_sleep_deps,
.sleepdep_srcs = mpu_wkup_sleep_deps,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_2_44xx_clkdm = {
@@ -584,7 +339,6 @@
.clkdm_offs = OMAP4430_CM2_CORE_L3_2_CDOFFS,
.dep_bit = OMAP4430_L3_2_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_1_44xx_clkdm = {
@@ -595,7 +349,6 @@
.clkdm_offs = OMAP4430_CM2_CORE_L3_1_CDOFFS,
.dep_bit = OMAP4430_L3_1_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain iss_44xx_clkdm = {
@@ -607,7 +360,6 @@
.wkdep_srcs = iss_wkup_sleep_deps,
.sleepdep_srcs = iss_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_dss_44xx_clkdm = {
@@ -620,7 +372,6 @@
.wkdep_srcs = l3_dss_wkup_sleep_deps,
.sleepdep_srcs = l3_dss_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l4_wkup_44xx_clkdm = {
@@ -631,7 +382,6 @@
.clkdm_offs = OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS,
.dep_bit = OMAP4430_L4WKUP_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain emu_sys_44xx_clkdm = {
@@ -641,7 +391,6 @@
.cm_inst = OMAP4430_PRM_EMU_CM_INST,
.clkdm_offs = OMAP4430_PRM_EMU_CM_EMU_CDOFFS,
.flags = CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_dma_44xx_clkdm = {
@@ -653,7 +402,6 @@
.wkdep_srcs = l3_dma_wkup_sleep_deps,
.sleepdep_srcs = l3_dma_wkup_sleep_deps,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* As clockdomains are added or removed above, this list must also be changed */
@@ -685,7 +433,10 @@
NULL
};
+
void __init omap44xx_clockdomains_init(void)
{
- clkdm_init(clockdomains_omap44xx, NULL, &omap4_clkdm_operations);
+ clkdm_register_platform_funcs(&omap4_clkdm_operations);
+ clkdm_register_clkdms(clockdomains_omap44xx);
+ clkdm_complete_init();
}
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index 3f20cbb..de61f15 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -56,6 +56,12 @@
{
__omap2_set_globals(&omap242x_globals);
}
+
+void __init omap242x_map_io(void)
+{
+ omap2_set_globals_242x();
+ omap242x_map_common_io();
+}
#endif
#if defined(CONFIG_SOC_OMAP2430)
@@ -74,6 +80,12 @@
{
__omap2_set_globals(&omap243x_globals);
}
+
+void __init omap243x_map_io(void)
+{
+ omap2_set_globals_243x();
+ omap243x_map_common_io();
+}
#endif
#if defined(CONFIG_ARCH_OMAP3)
@@ -138,5 +150,11 @@
omap2_set_globals_control(&omap4_globals);
omap2_set_globals_prcm(&omap4_globals);
}
+
+void __init omap4_map_io(void)
+{
+ omap2_set_globals_443x();
+ omap44xx_map_common_io();
+}
#endif
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 1077ad6..37b4ef8 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -8,7 +8,7 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -16,6 +16,7 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/slab.h>
+#include <linux/of.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
@@ -26,7 +27,6 @@
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mcbsp.h>
-#include <mach/gpio.h>
#include <plat/mmc.h>
#include <plat/dma.h>
#include <plat/omap_hwmod.h>
@@ -44,7 +44,7 @@
{
int l;
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
char oh_name[L3_MODULES_MAX_LEN];
/*
@@ -61,12 +61,12 @@
if (!oh)
pr_err("could not look up %s\n", oh_name);
- od = omap_device_build("omap_l3_smx", 0, oh, NULL, 0,
+ pdev = omap_device_build("omap_l3_smx", 0, oh, NULL, 0,
NULL, 0, 0);
- WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name);
+ WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
- return IS_ERR(od) ? PTR_ERR(od) : 0;
+ return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
}
postcore_initcall(omap3_l3_init);
@@ -74,9 +74,13 @@
{
int l, i;
struct omap_hwmod *oh[3];
- struct omap_device *od;
+ struct platform_device *pdev;
char oh_name[L3_MODULES_MAX_LEN];
+ /* If dtb is there, the devices will be created dynamically */
+ if (of_have_populated_dt())
+ return -ENODEV;
+
/*
* To avoid code running on other OMAPs in
* multi-omap builds
@@ -92,12 +96,12 @@
pr_err("could not look up %s\n", oh_name);
}
- od = omap_device_build_ss("omap_l3_noc", 0, oh, 3, NULL,
+ pdev = omap_device_build_ss("omap_l3_noc", 0, oh, 3, NULL,
0, NULL, 0, 0);
- WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name);
+ WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
- return IS_ERR(od) ? PTR_ERR(od) : 0;
+ return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
}
postcore_initcall(omap4_l3_init);
@@ -221,18 +225,10 @@
#endif
}
-struct omap_device_pm_latency omap_keyboard_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
int __init omap4_keyboard_init(struct omap4_keypad_platform_data
*sdp4430_keypad_data, struct omap_board_data *bdata)
{
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_hwmod *oh;
struct omap4_keypad_platform_data *keypad_data;
unsigned int id = -1;
@@ -247,15 +243,13 @@
keypad_data = sdp4430_keypad_data;
- od = omap_device_build(name, id, oh, keypad_data,
- sizeof(struct omap4_keypad_platform_data),
- omap_keyboard_latency,
- ARRAY_SIZE(omap_keyboard_latency), 0);
+ pdev = omap_device_build(name, id, oh, keypad_data,
+ sizeof(struct omap4_keypad_platform_data), NULL, 0, 0);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
WARN(1, "Can't build omap_device for %s:%s.\n",
name, oh->name);
- return PTR_ERR(od);
+ return PTR_ERR(pdev);
}
oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
@@ -263,18 +257,10 @@
}
#if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
-static struct omap_device_pm_latency mbox_latencies[] = {
- [0] = {
- .activate_func = omap_device_enable_hwmods,
- .deactivate_func = omap_device_idle_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static inline void omap_init_mbox(void)
{
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
oh = omap_hwmod_lookup("mailbox");
if (!oh) {
@@ -282,10 +268,9 @@
return;
}
- od = omap_device_build("omap-mailbox", -1, oh, NULL, 0,
- mbox_latencies, ARRAY_SIZE(mbox_latencies), 0);
- WARN(IS_ERR(od), "%s: could not build device, err %ld\n",
- __func__, PTR_ERR(od));
+ pdev = omap_device_build("omap-mailbox", -1, oh, NULL, 0, NULL, 0, 0);
+ WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n",
+ __func__, PTR_ERR(pdev));
}
#else
static inline void omap_init_mbox(void) { }
@@ -334,17 +319,9 @@
#include <plat/mcspi.h>
-struct omap_device_pm_latency omap_mcspi_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
{
- struct omap_device *od;
+ struct platform_device *pdev;
char *name = "omap2_mcspi";
struct omap2_mcspi_platform_config *pdata;
static int spi_num;
@@ -371,10 +348,9 @@
}
spi_num++;
- od = omap_device_build(name, spi_num, oh, pdata,
- sizeof(*pdata), omap_mcspi_latency,
- ARRAY_SIZE(omap_mcspi_latency), 0);
- WARN(IS_ERR(od), "Can't build omap_device for %s:%s\n",
+ pdev = omap_device_build(name, spi_num, oh, pdata,
+ sizeof(*pdata), NULL, 0, 0);
+ WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s\n",
name, oh->name);
kfree(pdata);
return 0;
@@ -698,18 +674,10 @@
arch_initcall(omap2_init_devices);
#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
-static struct omap_device_pm_latency omap_wdt_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static int __init omap_init_wdt(void)
{
int id = -1;
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_hwmod *oh;
char *oh_name = "wd_timer2";
char *dev_name = "omap_wdt";
@@ -723,10 +691,8 @@
return -EINVAL;
}
- od = omap_device_build(dev_name, id, oh, NULL, 0,
- omap_wdt_latency,
- ARRAY_SIZE(omap_wdt_latency), 0);
- WARN(IS_ERR(od), "Can't build omap_device for %s:%s.\n",
+ pdev = omap_device_build(dev_name, id, oh, NULL, 0, NULL, 0, 0);
+ WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n",
dev_name, oh->name);
return 0;
}
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index a5b7a23..8ad0a2f 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -35,14 +35,6 @@
},
};
-static struct omap_device_pm_latency omap_dss_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
struct omap_dss_hwmod_data {
const char *oh_name;
const char *dev_name;
@@ -78,7 +70,7 @@
{
int r = 0;
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
int i, oh_count;
struct omap_display_platform_data pdata;
const struct omap_dss_hwmod_data *curr_dss_hwmod;
@@ -108,13 +100,12 @@
return -ENODEV;
}
- od = omap_device_build(curr_dss_hwmod[i].dev_name,
+ pdev = omap_device_build(curr_dss_hwmod[i].dev_name,
curr_dss_hwmod[i].id, oh, &pdata,
sizeof(struct omap_display_platform_data),
- omap_dss_latency,
- ARRAY_SIZE(omap_dss_latency), 0);
+ NULL, 0, 0);
- if (WARN((IS_ERR(od)), "Could not build omap_device for %s\n",
+ if (WARN((IS_ERR(pdev)), "Could not build omap_device for %s\n",
curr_dss_hwmod[i].oh_name))
return -ENODEV;
}
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index c9ff0e7..a59a45a 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -87,14 +87,6 @@
[CCDN] = 0xd8,
};
-static struct omap_device_pm_latency omap2_dma_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static void __iomem *dma_base;
static inline void dma_write(u32 val, int reg, int lch)
{
@@ -228,7 +220,7 @@
/* One time initializations */
static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
{
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_system_dma_plat_info *p;
struct resource *mem;
char *name = "omap_dma_system";
@@ -258,23 +250,22 @@
p->errata = configure_dma_errata();
- od = omap_device_build(name, 0, oh, p, sizeof(*p),
- omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0);
+ pdev = omap_device_build(name, 0, oh, p, sizeof(*p), NULL, 0, 0);
kfree(p);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
pr_err("%s: Can't build omap_device for %s:%s.\n",
__func__, name, oh->name);
- return PTR_ERR(od);
+ return PTR_ERR(pdev);
}
- mem = platform_get_resource(&od->pdev, IORESOURCE_MEM, 0);
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem) {
- dev_err(&od->pdev.dev, "%s: no mem resource\n", __func__);
+ dev_err(&pdev->dev, "%s: no mem resource\n", __func__);
return -EINVAL;
}
dma_base = ioremap(mem->start, resource_size(mem));
if (!dma_base) {
- dev_err(&od->pdev.dev, "%s: ioremap fail\n", __func__);
+ dev_err(&pdev->dev, "%s: ioremap fail\n", __func__);
return -ENOMEM;
}
@@ -283,7 +274,7 @@
(d->lch_count), GFP_KERNEL);
if (!d->chan) {
- dev_err(&od->pdev.dev, "%s: kzalloc fail\n", __func__);
+ dev_err(&pdev->dev, "%s: kzalloc fail\n", __func__);
return -ENOMEM;
}
return 0;
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 2765cdc..8cbfbc2 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -24,17 +24,9 @@
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
-static struct omap_device_pm_latency omap_gpio_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
{
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_gpio_platform_data *pdata;
struct omap_gpio_dev_attr *dev_attr;
char *name = "omap_gpio";
@@ -107,19 +99,17 @@
return -EINVAL;
}
- od = omap_device_build(name, id - 1, oh, pdata,
- sizeof(*pdata), omap_gpio_latency,
- ARRAY_SIZE(omap_gpio_latency),
- false);
+ pdev = omap_device_build(name, id - 1, oh, pdata,
+ sizeof(*pdata), NULL, 0, false);
kfree(pdata);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
WARN(1, "Can't build omap_device for %s:%s.\n",
name, oh->name);
- return PTR_ERR(od);
+ return PTR_ERR(pdev);
}
- omap_device_disable_idle_on_suspend(od);
+ omap_device_disable_idle_on_suspend(pdev);
gpio_bank_count++;
return 0;
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index a9b45c7..7708584 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -137,8 +137,7 @@
*/
reg = omap4_ctrl_pad_readl(control_pbias_offset);
reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
- OMAP4_MMC1_PWRDNZ_MASK |
- OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
+ OMAP4_MMC1_PWRDNZ_MASK);
omap4_ctrl_pad_writel(reg, control_pbias_offset);
}
@@ -156,8 +155,7 @@
else
reg |= OMAP4_MMC1_PBIASLITE_VMODE_MASK;
reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
- OMAP4_MMC1_PWRDNZ_MASK |
- OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
+ OMAP4_MMC1_PWRDNZ_MASK);
omap4_ctrl_pad_writel(reg, control_pbias_offset);
timeout = jiffies + msecs_to_jiffies(5);
@@ -171,16 +169,14 @@
if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) {
pr_err("Pbias Voltage is not same as LDO\n");
/* Caution : On VMODE_ERROR Power Down MMC IO */
- reg &= ~(OMAP4_MMC1_PWRDNZ_MASK |
- OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
+ reg &= ~(OMAP4_MMC1_PWRDNZ_MASK);
omap4_ctrl_pad_writel(reg, control_pbias_offset);
}
} else {
reg = omap4_ctrl_pad_readl(control_pbias_offset);
reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
OMAP4_MMC1_PWRDNZ_MASK |
- OMAP4_MMC1_PBIASLITE_VMODE_MASK |
- OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
+ OMAP4_MMC1_PBIASLITE_VMODE_MASK);
omap4_ctrl_pad_writel(reg, control_pbias_offset);
}
}
@@ -413,31 +409,17 @@
return 0;
}
-static struct omap_device_pm_latency omap_hsmmc_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
- /*
- * XXX There should also be an entry here to power off/on the
- * MMC regulators/PBIAS cells, etc.
- */
-};
-
#define MAX_OMAP_MMC_HWMOD_NAME_LEN 16
void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
{
struct omap_hwmod *oh;
- struct omap_device *od;
- struct omap_device_pm_latency *ohl;
+ struct platform_device *pdev;
char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN];
struct omap_mmc_platform_data *mmc_data;
struct omap_mmc_dev_attr *mmc_dev_attr;
char *name;
int l;
- int ohl_cnt = 0;
mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
if (!mmc_data) {
@@ -452,8 +434,6 @@
omap_hsmmc_mux(mmc_data, (ctrl_nr - 1));
name = "omap_hsmmc";
- ohl = omap_hsmmc_latency;
- ohl_cnt = ARRAY_SIZE(omap_hsmmc_latency);
l = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
"mmc%d", ctrl_nr);
@@ -471,9 +451,9 @@
mmc_data->controller_flags = mmc_dev_attr->flags;
}
- od = omap_device_build(name, ctrl_nr - 1, oh, mmc_data,
- sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false);
- if (IS_ERR(od)) {
+ pdev = omap_device_build(name, ctrl_nr - 1, oh, mmc_data,
+ sizeof(struct omap_mmc_platform_data), NULL, 0, false);
+ if (IS_ERR(pdev)) {
WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name);
kfree(mmc_data->slots[0].name);
goto done;
@@ -482,7 +462,7 @@
* return device handle to board setup code
* required to populate for regulator framework structure
*/
- hsmmcinfo->dev = &od->pdev.dev;
+ hsmmcinfo->dev = &pdev->dev;
done:
kfree(mmc_data);
diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c
index 06d4a80..36e2109 100644
--- a/arch/arm/mach-omap2/hwspinlock.c
+++ b/arch/arm/mach-omap2/hwspinlock.c
@@ -23,19 +23,11 @@
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
-struct omap_device_pm_latency omap_spinlock_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- }
-};
-
int __init hwspinlocks_init(void)
{
int retval = 0;
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
const char *oh_name = "spinlock";
const char *dev_name = "omap_hwspinlock";
@@ -48,13 +40,11 @@
if (oh == NULL)
return -EINVAL;
- od = omap_device_build(dev_name, 0, oh, NULL, 0,
- omap_spinlock_latency,
- ARRAY_SIZE(omap_spinlock_latency), false);
- if (IS_ERR(od)) {
+ pdev = omap_device_build(dev_name, 0, oh, NULL, 0, NULL, 0, false);
+ if (IS_ERR(pdev)) {
pr_err("Can't build omap_device for %s:%s\n", dev_name,
oh_name);
- retval = PTR_ERR(od);
+ retval = PTR_ERR(pdev);
}
return retval;
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 37efb86..d27daf9 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -28,7 +28,6 @@
#include "control.h"
-static struct omap_chip_id omap_chip;
static unsigned int omap_revision;
u32 omap_features;
@@ -39,19 +38,6 @@
}
EXPORT_SYMBOL(omap_rev);
-/**
- * omap_chip_is - test whether currently running OMAP matches a chip type
- * @oc: omap_chip_t to test against
- *
- * Test whether the currently-running OMAP chip matches the supplied
- * chip type 'oc'. Returns 1 upon a match; 0 upon failure.
- */
-int omap_chip_is(struct omap_chip_id oci)
-{
- return (oci.oc & omap_chip.oc) ? 1 : 0;
-}
-EXPORT_SYMBOL(omap_chip_is);
-
int omap_type(void)
{
u32 val = 0;
@@ -242,14 +228,12 @@
omap_features = OMAP3_HAS_NEON;
}
-static void __init omap3_check_revision(void)
+static void __init omap3_check_revision(const char **cpu_rev)
{
u32 cpuid, idcode;
u16 hawkeye;
u8 rev;
- omap_chip.oc = CHIP_IS_OMAP3430;
-
/*
* We cannot access revision registers on ES1.0.
* If the processor type is Cortex-A8 and the revision is 0x0
@@ -258,7 +242,7 @@
cpuid = read_cpuid(CPUID_ID);
if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
omap_revision = OMAP3430_REV_ES1_0;
- omap_chip.oc |= CHIP_IS_OMAP3430ES1;
+ *cpu_rev = "1.0";
return;
}
@@ -279,77 +263,85 @@
case 0: /* Take care of early samples */
case 1:
omap_revision = OMAP3430_REV_ES2_0;
- omap_chip.oc |= CHIP_IS_OMAP3430ES2;
+ *cpu_rev = "2.0";
break;
case 2:
omap_revision = OMAP3430_REV_ES2_1;
- omap_chip.oc |= CHIP_IS_OMAP3430ES2;
+ *cpu_rev = "2.1";
break;
case 3:
omap_revision = OMAP3430_REV_ES3_0;
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
+ *cpu_rev = "3.0";
break;
case 4:
omap_revision = OMAP3430_REV_ES3_1;
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+ *cpu_rev = "3.1";
break;
case 7:
/* FALLTHROUGH */
default:
/* Use the latest known revision as default */
omap_revision = OMAP3430_REV_ES3_1_2;
-
- /* REVISIT: Add CHIP_IS_OMAP3430ES3_1_2? */
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+ *cpu_rev = "3.1.2";
}
break;
case 0xb868:
- /* Handle OMAP35xx/AM35xx devices
+ /*
+ * Handle OMAP/AM 3505/3517 devices
*
- * Set the device to be OMAP3505 here. Actual device
+ * Set the device to be OMAP3517 here. Actual device
* is identified later based on the features.
- *
- * REVISIT: AM3505/AM3517 should have their own CHIP_IS
*/
- omap_revision = OMAP3505_REV(rev);
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+ switch (rev) {
+ case 0:
+ omap_revision = OMAP3517_REV_ES1_0;
+ *cpu_rev = "1.0";
+ break;
+ case 1:
+ /* FALLTHROUGH */
+ default:
+ omap_revision = OMAP3517_REV_ES1_1;
+ *cpu_rev = "1.1";
+ }
break;
case 0xb891:
/* Handle 36xx devices */
- omap_chip.oc |= CHIP_IS_OMAP3630ES1;
switch(rev) {
case 0: /* Take care of early samples */
omap_revision = OMAP3630_REV_ES1_0;
+ *cpu_rev = "1.0";
break;
case 1:
omap_revision = OMAP3630_REV_ES1_1;
- omap_chip.oc |= CHIP_IS_OMAP3630ES1_1;
+ *cpu_rev = "1.1";
break;
case 2:
+ /* FALLTHROUGH */
default:
- omap_revision = OMAP3630_REV_ES1_2;
- omap_chip.oc |= CHIP_IS_OMAP3630ES1_2;
+ omap_revision = OMAP3630_REV_ES1_2;
+ *cpu_rev = "1.2";
}
break;
case 0xb81e:
- omap_chip.oc = CHIP_IS_TI816X;
-
switch (rev) {
case 0:
omap_revision = TI8168_REV_ES1_0;
+ *cpu_rev = "1.0";
break;
case 1:
- omap_revision = TI8168_REV_ES1_1;
- break;
+ /* FALLTHROUGH */
default:
- omap_revision = TI8168_REV_ES1_1;
+ omap_revision = TI8168_REV_ES1_1;
+ *cpu_rev = "1.1";
+ break;
}
break;
default:
- /* Unknown default to latest silicon rev as default*/
- omap_revision = OMAP3630_REV_ES1_2;
- omap_chip.oc |= CHIP_IS_OMAP3630ES1_2;
+ /* Unknown default to latest silicon rev as default */
+ omap_revision = OMAP3630_REV_ES1_2;
+ *cpu_rev = "1.2";
+ pr_warn("Warning: unknown chip type; assuming OMAP3630ES1.2\n");
}
}
@@ -382,24 +374,20 @@
switch (rev) {
case 0:
omap_revision = OMAP4430_REV_ES1_0;
- omap_chip.oc |= CHIP_IS_OMAP4430ES1;
break;
case 1:
default:
omap_revision = OMAP4430_REV_ES2_0;
- omap_chip.oc |= CHIP_IS_OMAP4430ES2;
}
break;
case 0xb95c:
switch (rev) {
case 3:
omap_revision = OMAP4430_REV_ES2_1;
- omap_chip.oc |= CHIP_IS_OMAP4430ES2_1;
break;
case 4:
default:
omap_revision = OMAP4430_REV_ES2_2;
- omap_chip.oc |= CHIP_IS_OMAP4430ES2_2;
}
break;
case 0xb94e:
@@ -407,14 +395,12 @@
case 0:
default:
omap_revision = OMAP4460_REV_ES1_0;
- omap_chip.oc |= CHIP_IS_OMAP4460ES1_0;
break;
}
break;
default:
/* Unknown default to latest silicon rev as default */
omap_revision = OMAP4430_REV_ES2_2;
- omap_chip.oc |= CHIP_IS_OMAP4430ES2_2;
}
pr_info("OMAP%04x ES%d.%d\n", omap_rev() >> 16,
@@ -425,94 +411,33 @@
if (omap3_has_ ##feat()) \
printk(#feat" ");
-static void __init omap3_cpuinfo(void)
+static void __init omap3_cpuinfo(const char *cpu_rev)
{
- u8 rev = GET_OMAP_REVISION();
- char cpu_name[16], cpu_rev[16];
+ const char *cpu_name;
- /* OMAP3430 and OMAP3530 are assumed to be same.
+ /*
+ * OMAP3430 and OMAP3530 are assumed to be same.
*
* OMAP3525, OMAP3515 and OMAP3503 can be detected only based
* on available features. Upon detection, update the CPU id
* and CPU class bits.
*/
if (cpu_is_omap3630()) {
- strcpy(cpu_name, "OMAP3630");
- } else if (cpu_is_omap3505()) {
- /*
- * AM35xx devices
- */
- if (omap3_has_sgx()) {
- omap_revision = OMAP3517_REV(rev);
- strcpy(cpu_name, "AM3517");
- } else {
- /* Already set in omap3_check_revision() */
- strcpy(cpu_name, "AM3505");
- }
+ cpu_name = "OMAP3630";
+ } else if (cpu_is_omap3517()) {
+ /* AM35xx devices */
+ cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
} else if (cpu_is_ti816x()) {
- strcpy(cpu_name, "TI816X");
+ cpu_name = "TI816X";
} else if (omap3_has_iva() && omap3_has_sgx()) {
/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
- strcpy(cpu_name, "OMAP3430/3530");
+ cpu_name = "OMAP3430/3530";
} else if (omap3_has_iva()) {
- omap_revision = OMAP3525_REV(rev);
- strcpy(cpu_name, "OMAP3525");
+ cpu_name = "OMAP3525";
} else if (omap3_has_sgx()) {
- omap_revision = OMAP3515_REV(rev);
- strcpy(cpu_name, "OMAP3515");
+ cpu_name = "OMAP3515";
} else {
- omap_revision = OMAP3503_REV(rev);
- strcpy(cpu_name, "OMAP3503");
- }
-
- if (cpu_is_omap3630() || cpu_is_ti816x()) {
- switch (rev) {
- case OMAP_REVBITS_00:
- strcpy(cpu_rev, "1.0");
- break;
- case OMAP_REVBITS_01:
- strcpy(cpu_rev, "1.1");
- break;
- case OMAP_REVBITS_02:
- /* FALLTHROUGH */
- default:
- /* Use the latest known revision as default */
- strcpy(cpu_rev, "1.2");
- }
- } else if (cpu_is_omap3505() || cpu_is_omap3517()) {
- switch (rev) {
- case OMAP_REVBITS_00:
- strcpy(cpu_rev, "1.0");
- break;
- case OMAP_REVBITS_01:
- /* FALLTHROUGH */
- default:
- /* Use the latest known revision as default */
- strcpy(cpu_rev, "1.1");
- }
- } else {
- switch (rev) {
- case OMAP_REVBITS_00:
- strcpy(cpu_rev, "1.0");
- break;
- case OMAP_REVBITS_01:
- strcpy(cpu_rev, "2.0");
- break;
- case OMAP_REVBITS_02:
- strcpy(cpu_rev, "2.1");
- break;
- case OMAP_REVBITS_03:
- strcpy(cpu_rev, "3.0");
- break;
- case OMAP_REVBITS_04:
- strcpy(cpu_rev, "3.1");
- break;
- case OMAP_REVBITS_05:
- /* FALLTHROUGH */
- default:
- /* Use the latest known revision as default */
- strcpy(cpu_rev, "3.1.2");
- }
+ cpu_name = "OMAP3503";
}
/* Print verbose information */
@@ -533,6 +458,8 @@
*/
void __init omap2_check_revision(void)
{
+ const char *cpu_rev;
+
/*
* At this point we have an idea about the processor revision set
* earlier with omap2_set_globals_tap().
@@ -540,7 +467,7 @@
if (cpu_is_omap24xx()) {
omap24xx_check_revision();
} else if (cpu_is_omap34xx()) {
- omap3_check_revision();
+ omap3_check_revision(&cpu_rev);
/* TI816X doesn't have feature register */
if (!cpu_is_ti816x())
@@ -548,7 +475,7 @@
else
ti816x_check_features();
- omap3_cpuinfo();
+ omap3_cpuinfo(cpu_rev);
return;
} else if (cpu_is_omap44xx()) {
omap4_check_revision();
@@ -557,22 +484,6 @@
} else {
pr_err("OMAP revision unknown, please fix!\n");
}
-
- /*
- * OK, now we know the exact revision. Initialize omap_chip bits
- * for powerdowmain and clockdomain code.
- */
- if (cpu_is_omap243x()) {
- /* Currently only supports 2430ES2.1 and 2430-all */
- omap_chip.oc |= CHIP_IS_OMAP2430;
- return;
- } else if (cpu_is_omap242x()) {
- /* Currently only supports 2420ES2.1.1 and 2420-all */
- omap_chip.oc |= CHIP_IS_OMAP2420;
- return;
- }
-
- pr_err("Uninitialized omap_chip, please fix!\n");
}
/*
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index d6d01cb..f012730 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -37,6 +37,7 @@
#include "io.h"
#include <plat/omap-pm.h>
+#include "voltage.h"
#include "powerdomain.h"
#include "clockdomain.h"
@@ -341,18 +342,22 @@
u8 postsetup_state;
if (cpu_is_omap242x()) {
- omap2xxx_powerdomains_init();
- omap2xxx_clockdomains_init();
+ omap2xxx_voltagedomains_init();
+ omap242x_powerdomains_init();
+ omap242x_clockdomains_init();
omap2420_hwmod_init();
} else if (cpu_is_omap243x()) {
- omap2xxx_powerdomains_init();
- omap2xxx_clockdomains_init();
+ omap2xxx_voltagedomains_init();
+ omap243x_powerdomains_init();
+ omap243x_clockdomains_init();
omap2430_hwmod_init();
} else if (cpu_is_omap34xx()) {
+ omap3xxx_voltagedomains_init();
omap3xxx_powerdomains_init();
omap3xxx_clockdomains_init();
omap3xxx_hwmod_init();
} else if (cpu_is_omap44xx()) {
+ omap44xx_voltagedomains_init();
omap44xx_powerdomains_init();
omap44xx_clockdomains_init();
omap44xx_hwmod_init();
@@ -376,7 +381,7 @@
* omap_hwmod_late_init(), so boards that desire full watchdog
* coverage of kernel initialization can reprogram the
* postsetup_state between the calls to
- * omap2_init_common_infra() and omap2_init_common_devices().
+ * omap2_init_common_infra() and omap_sdrc_init().
*
* XXX ideally we could detect whether the MPU WDT was currently
* enabled here and make this conditional
@@ -400,7 +405,47 @@
pr_err("Could not init clock framework - unknown SoC\n");
}
-void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
+void __init omap2420_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init omap2430_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init omap3430_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init omap35xx_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init omap3630_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init am35xx_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init ti816x_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init omap4430_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1)
{
if (cpu_is_omap24xx() || omap3_has_sdrc()) {
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 3a12f75..65f1be6 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -165,8 +165,8 @@
omap_irq_bank_init_one(bank);
- for (i = 0, j = 0; i < bank->nr_irqs; i += 32, j += 0x20)
- omap_alloc_gc(bank->base_reg + j, i, 32);
+ for (j = 0; j < bank->nr_irqs; j += 32)
+ omap_alloc_gc(bank->base_reg + j, j, 32);
nr_of_irqs += bank->nr_irqs;
nr_banks++;
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 4a6ef6a..292eee3 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -27,66 +27,69 @@
#include "control.h"
-/* McBSP internal signal muxing functions */
+/*
+ * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle.
+ * Sidetone needs non-gated ICLK and sidetone autoidle is broken.
+ */
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-34xx.h"
-void omap2_mcbsp1_mux_clkr_src(u8 mux)
+/* McBSP internal signal muxing function */
+static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal,
+ const char *src)
{
u32 v;
v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
- if (mux == CLKR_SRC_CLKR)
- v &= ~OMAP2_MCBSP1_CLKR_MASK;
- else if (mux == CLKR_SRC_CLKX)
- v |= OMAP2_MCBSP1_CLKR_MASK;
- omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
-}
-EXPORT_SYMBOL(omap2_mcbsp1_mux_clkr_src);
-void omap2_mcbsp1_mux_fsr_src(u8 mux)
-{
- u32 v;
+ if (!strcmp(signal, "clkr")) {
+ if (!strcmp(src, "clkr"))
+ v &= ~OMAP2_MCBSP1_CLKR_MASK;
+ else if (!strcmp(src, "clkx"))
+ v |= OMAP2_MCBSP1_CLKR_MASK;
+ else
+ return -EINVAL;
+ } else if (!strcmp(signal, "fsr")) {
+ if (!strcmp(src, "fsr"))
+ v &= ~OMAP2_MCBSP1_FSR_MASK;
+ else if (!strcmp(src, "fsx"))
+ v |= OMAP2_MCBSP1_FSR_MASK;
+ else
+ return -EINVAL;
+ } else {
+ return -EINVAL;
+ }
- v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
- if (mux == FSR_SRC_FSR)
- v &= ~OMAP2_MCBSP1_FSR_MASK;
- else if (mux == FSR_SRC_FSX)
- v |= OMAP2_MCBSP1_FSR_MASK;
omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
+
+ return 0;
}
-EXPORT_SYMBOL(omap2_mcbsp1_mux_fsr_src);
/* McBSP CLKS source switching function */
-
-int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id)
+static int omap2_mcbsp_set_clk_src(struct device *dev, struct clk *clk,
+ const char *src)
{
- struct omap_mcbsp *mcbsp;
struct clk *fck_src;
char *fck_src_name;
int r;
- if (!omap_mcbsp_check_valid_id(id)) {
- pr_err("%s: Invalid id (%d)\n", __func__, id + 1);
- return -EINVAL;
- }
- mcbsp = id_to_mcbsp_ptr(id);
-
- if (fck_src_id == MCBSP_CLKS_PAD_SRC)
+ if (!strcmp(src, "clks_ext"))
fck_src_name = "pad_fck";
- else if (fck_src_id == MCBSP_CLKS_PRCM_SRC)
+ else if (!strcmp(src, "clks_fclk"))
fck_src_name = "prcm_fck";
else
return -EINVAL;
- fck_src = clk_get(mcbsp->dev, fck_src_name);
+ fck_src = clk_get(dev, fck_src_name);
if (IS_ERR_OR_NULL(fck_src)) {
pr_err("omap-mcbsp: %s: could not clk_get() %s\n", "clks",
fck_src_name);
return -EINVAL;
}
- pm_runtime_put_sync(mcbsp->dev);
+ pm_runtime_put_sync(dev);
- r = clk_set_parent(mcbsp->fclk, fck_src);
+ r = clk_set_parent(clk, fck_src);
if (IS_ERR_VALUE(r)) {
pr_err("omap-mcbsp: %s: could not clk_set_parent() to %s\n",
"clks", fck_src_name);
@@ -94,21 +97,30 @@
return -EINVAL;
}
- pm_runtime_get_sync(mcbsp->dev);
+ pm_runtime_get_sync(dev);
clk_put(fck_src);
return 0;
}
-EXPORT_SYMBOL(omap2_mcbsp_set_clks_src);
-struct omap_device_pm_latency omap2_mcbsp_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
+static int omap3_enable_st_clock(unsigned int id, bool enable)
+{
+ unsigned int w;
+
+ /*
+ * Sidetone uses McBSP ICLK - which must not idle when sidetones
+ * are enabled or sidetones start sounding ugly.
+ */
+ w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
+ if (enable)
+ w &= ~(1 << (id - 2));
+ else
+ w |= 1 << (id - 2);
+ omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
+
+ return 0;
+}
static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
{
@@ -116,7 +128,7 @@
char *name = "omap-mcbsp";
struct omap_hwmod *oh_device[2];
struct omap_mcbsp_platform_data *pdata = NULL;
- struct omap_device *od;
+ struct platform_device *pdev;
sscanf(oh->name, "mcbsp%d", &id);
@@ -126,7 +138,13 @@
return -ENOMEM;
}
- pdata->mcbsp_config_type = oh->class->rev;
+ pdata->reg_step = 4;
+ if (oh->class->rev < MCBSP_CONFIG_TYPE2) {
+ pdata->reg_size = 2;
+ } else {
+ pdata->reg_size = 4;
+ pdata->has_ccr = true;
+ }
if (oh->class->rev == MCBSP_CONFIG_TYPE3) {
if (id == 2)
@@ -137,22 +155,28 @@
pdata->buffer_size = 0x80;
}
+ if (oh->class->rev >= MCBSP_CONFIG_TYPE3)
+ pdata->has_wakeup = true;
+
oh_device[0] = oh;
if (oh->dev_attr) {
oh_device[1] = omap_hwmod_lookup((
(struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone);
+ pdata->enable_st_clock = omap3_enable_st_clock;
count++;
}
- od = omap_device_build_ss(name, id, oh_device, count, pdata,
- sizeof(*pdata), omap2_mcbsp_latency,
- ARRAY_SIZE(omap2_mcbsp_latency), false);
+ pdev = omap_device_build_ss(name, id, oh_device, count, pdata,
+ sizeof(*pdata), NULL, 0, false);
kfree(pdata);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
pr_err("%s: Can't build omap_device for %s:%s.\n", __func__,
name, oh->name);
- return PTR_ERR(od);
+ return PTR_ERR(pdev);
}
+ pdata->set_clk_src = omap2_mcbsp_set_clk_src;
+ if (id == 1)
+ pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
omap_mcbsp_count++;
return 0;
}
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 84cc0bd..d713807 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1954,9 +1954,6 @@
i = 0;
do {
- if (!omap_chip_is(ohs[i]->omap_chip))
- continue;
-
r = _register(ohs[i]);
WARN(r, "omap_hwmod: %s: _register returned %d\n", ohs[i]->name,
r);
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index a015c69..6d72062 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -100,7 +100,6 @@
.masters_cnt = ARRAY_SIZE(omap2420_l3_main_masters),
.slaves = omap2420_l3_main_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l3_main_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -206,7 +205,6 @@
.masters_cnt = ARRAY_SIZE(omap2420_l4_core_masters),
.slaves = omap2420_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l4_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -227,7 +225,6 @@
.masters_cnt = ARRAY_SIZE(omap2420_l4_wkup_masters),
.slaves = omap2420_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -243,7 +240,6 @@
.main_clk = "mpu_ck",
.masters = omap2420_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap2420_mpu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/*
@@ -271,7 +267,16 @@
.class = &iva_hwmod_class,
.masters = omap2420_iva_masters,
.masters_cnt = ARRAY_SIZE(omap2420_iva_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+};
+
+/* always-on timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
+ .timer_capability = OMAP_TIMER_ALWON,
+};
+
+/* pwm timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
+ .timer_capability = OMAP_TIMER_HAS_PWM,
};
/* timer1 */
@@ -314,10 +319,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer1_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer2 */
@@ -351,10 +356,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer2_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer3 */
@@ -388,10 +393,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer3_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer4 */
@@ -425,10 +430,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer4_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer4_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer5 */
@@ -462,10 +467,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer5_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer5_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
@@ -500,10 +505,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer6_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer6_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer7 */
@@ -537,10 +542,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer7_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer7_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer8 */
@@ -574,10 +579,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer8_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer8_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer9 */
@@ -611,10 +616,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2420_timer9_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer9_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer10 */
@@ -648,10 +653,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2420_timer10_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer10_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer11 */
@@ -685,10 +690,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2420_timer11_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer11_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer12 */
@@ -722,10 +727,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2420_timer12_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer12_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* l4_wkup -> wd_timer2 */
@@ -766,7 +771,6 @@
},
.slaves = omap2420_wd_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_wd_timer2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* UART1 */
@@ -792,7 +796,6 @@
.slaves = omap2420_uart1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_uart1_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* UART2 */
@@ -818,7 +821,6 @@
.slaves = omap2420_uart2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_uart2_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* UART3 */
@@ -844,7 +846,6 @@
.slaves = omap2420_uart3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_uart3_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* dss */
@@ -898,7 +899,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_dss_slaves),
.masters = omap2420_dss_masters,
.masters_cnt = ARRAY_SIZE(omap2420_dss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -938,7 +938,6 @@
},
.slaves = omap2420_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_dispc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -975,7 +974,6 @@
},
.slaves = omap2420_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_rfbi_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -1013,7 +1011,6 @@
},
.slaves = omap2420_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_venc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -1064,7 +1061,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_i2c1_slaves),
.class = &i2c_class,
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_16BIT_REG,
};
@@ -1092,7 +1088,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_i2c2_slaves),
.class = &i2c_class,
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_16BIT_REG,
};
@@ -1197,7 +1192,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_gpio1_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* gpio2 */
@@ -1223,7 +1217,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_gpio2_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* gpio3 */
@@ -1249,7 +1242,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_gpio3_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* gpio4 */
@@ -1275,7 +1267,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_gpio4_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* dma attributes */
@@ -1322,7 +1313,6 @@
.masters = omap2420_dma_system_masters,
.masters_cnt = ARRAY_SIZE(omap2420_dma_system_masters),
.dev_attr = &dma_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -1363,7 +1353,6 @@
},
.slaves = omap2420_mailbox_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_mailbox_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* mcspi1 */
@@ -1393,7 +1382,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_mcspi1_slaves),
.class = &omap2xxx_mcspi_class,
.dev_attr = &omap_mcspi1_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* mcspi2 */
@@ -1423,7 +1411,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_mcspi2_slaves),
.class = &omap2xxx_mcspi_class,
.dev_attr = &omap_mcspi2_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/*
@@ -1473,7 +1460,6 @@
},
.slaves = omap2420_mcbsp1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_mcbsp1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* mcbsp2 */
@@ -1514,7 +1500,6 @@
},
.slaves = omap2420_mcbsp2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_mcbsp2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
static __initdata struct omap_hwmod *omap2420_hwmods[] = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 408193d..a2580d0 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -110,7 +110,6 @@
.masters_cnt = ARRAY_SIZE(omap2430_l3_main_masters),
.slaves = omap2430_l3_main_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l3_main_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -250,7 +249,6 @@
.masters_cnt = ARRAY_SIZE(omap2430_l4_core_masters),
.slaves = omap2430_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l4_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -301,7 +299,6 @@
.masters_cnt = ARRAY_SIZE(omap2430_l4_wkup_masters),
.slaves = omap2430_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -317,7 +314,6 @@
.main_clk = "mpu_ck",
.masters = omap2430_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap2430_mpu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/*
@@ -345,7 +341,16 @@
.class = &iva_hwmod_class,
.masters = omap2430_iva_masters,
.masters_cnt = ARRAY_SIZE(omap2430_iva_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+};
+
+/* always-on timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
+ .timer_capability = OMAP_TIMER_ALWON,
+};
+
+/* pwm timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
+ .timer_capability = OMAP_TIMER_HAS_PWM,
};
/* timer1 */
@@ -388,10 +393,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer1_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer2 */
@@ -425,10 +430,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer2_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer3 */
@@ -462,10 +467,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer3_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer4 */
@@ -499,10 +504,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer4_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer4_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer5 */
@@ -536,10 +541,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer5_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer5_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer6 */
@@ -573,10 +578,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer6_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer6_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer7 */
@@ -610,10 +615,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer7_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer7_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer8 */
@@ -647,10 +652,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer8_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer8_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer9 */
@@ -684,10 +689,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2430_timer9_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer9_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer10 */
@@ -721,10 +726,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2430_timer10_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer10_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer11 */
@@ -758,10 +763,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2430_timer11_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer11_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer12 */
@@ -795,10 +800,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2430_timer12_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer12_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* l4_wkup -> wd_timer2 */
@@ -839,7 +844,6 @@
},
.slaves = omap2430_wd_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_wd_timer2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* UART1 */
@@ -865,7 +869,6 @@
.slaves = omap2430_uart1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_uart1_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* UART2 */
@@ -891,7 +894,6 @@
.slaves = omap2430_uart2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_uart2_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* UART3 */
@@ -917,7 +919,6 @@
.slaves = omap2430_uart3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_uart3_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* dss */
@@ -965,7 +966,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_dss_slaves),
.masters = omap2430_dss_masters,
.masters_cnt = ARRAY_SIZE(omap2430_dss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -999,7 +999,6 @@
},
.slaves = omap2430_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_dispc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -1030,7 +1029,6 @@
},
.slaves = omap2430_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_rfbi_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -1062,7 +1060,6 @@
},
.slaves = omap2430_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_venc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -1123,7 +1120,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_i2c1_slaves),
.class = &i2c_class,
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* I2C2 */
@@ -1151,7 +1147,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_i2c2_slaves),
.class = &i2c_class,
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* l4_wkup -> gpio1 */
@@ -1273,7 +1268,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_gpio1_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* gpio2 */
@@ -1299,7 +1293,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_gpio2_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* gpio3 */
@@ -1325,7 +1318,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_gpio3_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* gpio4 */
@@ -1351,7 +1343,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_gpio4_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* gpio5 */
@@ -1382,7 +1373,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_gpio5_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* dma attributes */
@@ -1429,7 +1419,6 @@
.masters = omap2430_dma_system_masters,
.masters_cnt = ARRAY_SIZE(omap2430_dma_system_masters),
.dev_attr = &dma_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -1469,7 +1458,6 @@
},
.slaves = omap2430_mailbox_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mailbox_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcspi1 */
@@ -1499,7 +1487,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_mcspi1_slaves),
.class = &omap2xxx_mcspi_class,
.dev_attr = &omap_mcspi1_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcspi2 */
@@ -1529,7 +1516,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_mcspi2_slaves),
.class = &omap2xxx_mcspi_class,
.dev_attr = &omap_mcspi2_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcspi3 */
@@ -1572,7 +1558,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_mcspi3_slaves),
.class = &omap2xxx_mcspi_class,
.dev_attr = &omap_mcspi3_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/*
@@ -1628,7 +1613,6 @@
*/
.flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
| HWMOD_SWSUP_MSTANDBY,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/*
@@ -1689,7 +1673,6 @@
},
.slaves = omap2430_mcbsp1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mcbsp1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcbsp2 */
@@ -1731,7 +1714,6 @@
},
.slaves = omap2430_mcbsp2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mcbsp2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcbsp3 */
@@ -1783,7 +1765,6 @@
},
.slaves = omap2430_mcbsp3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mcbsp3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcbsp4 */
@@ -1841,7 +1822,6 @@
},
.slaves = omap2430_mcbsp4_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mcbsp4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcbsp5 */
@@ -1899,7 +1879,6 @@
},
.slaves = omap2430_mcbsp5_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mcbsp5_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* MMC/SD/SDIO common */
@@ -1966,7 +1945,6 @@
.slaves = omap2430_mmc1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mmc1_slaves),
.class = &omap2430_mmc_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* MMC/SD/SDIO2 */
@@ -2010,7 +1988,6 @@
.slaves = omap2430_mmc2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mmc2_slaves),
.class = &omap2430_mmc_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
static __initdata struct omap_hwmod *omap2430_hwmods[] = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 25bf43b..3008e16 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -156,7 +156,6 @@
.masters_cnt = ARRAY_SIZE(omap3xxx_l3_main_masters),
.slaves = omap3xxx_l3_main_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l3_main_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.flags = HWMOD_NO_IDLEST,
};
@@ -459,7 +458,6 @@
.class = &l4_hwmod_class,
.slaves = omap3xxx_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l4_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.flags = HWMOD_NO_IDLEST,
};
@@ -474,7 +472,6 @@
.class = &l4_hwmod_class,
.slaves = omap3xxx_l4_per_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l4_per_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.flags = HWMOD_NO_IDLEST,
};
@@ -489,7 +486,6 @@
.class = &l4_hwmod_class,
.slaves = omap3xxx_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.flags = HWMOD_NO_IDLEST,
};
@@ -505,7 +501,6 @@
.main_clk = "arm_fck",
.masters = omap3xxx_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_mpu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/*
@@ -533,7 +528,6 @@
.class = &iva_hwmod_class,
.masters = omap3xxx_iva_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_iva_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer class */
@@ -570,6 +564,21 @@
.rev = OMAP_TIMER_IP_VERSION_1,
};
+/* secure timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_secure_dev_attr = {
+ .timer_capability = OMAP_TIMER_SECURE,
+};
+
+/* always-on timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
+ .timer_capability = OMAP_TIMER_ALWON,
+};
+
+/* pwm timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
+ .timer_capability = OMAP_TIMER_HAS_PWM,
+};
+
/* timer1 */
static struct omap_hwmod omap3xxx_timer1_hwmod;
@@ -610,10 +619,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT1_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer1_slaves),
.class = &omap3xxx_timer_1ms_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer2 */
@@ -656,10 +665,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT2_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer2_slaves),
.class = &omap3xxx_timer_1ms_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer3 */
@@ -702,10 +711,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT3_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer3_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer3_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer4 */
@@ -748,10 +757,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT4_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer4_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer4_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer5 */
@@ -794,10 +803,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT5_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer5_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer5_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer6 */
@@ -840,10 +849,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT6_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer6_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer6_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer7 */
@@ -886,10 +895,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT7_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer7_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer7_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer8 */
@@ -932,10 +941,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT8_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap3xxx_timer8_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer8_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer9 */
@@ -978,10 +987,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT9_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap3xxx_timer9_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer9_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer10 */
@@ -1015,10 +1024,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT10_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap3xxx_timer10_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer10_slaves),
.class = &omap3xxx_timer_1ms_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer11 */
@@ -1052,10 +1061,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT11_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap3xxx_timer11_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer11_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer12*/
@@ -1102,10 +1111,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT12_SHIFT,
},
},
+ .dev_attr = &capability_secure_dev_attr,
.slaves = omap3xxx_timer12_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer12_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* l4_wkup -> wd_timer2 */
@@ -1182,7 +1191,6 @@
},
.slaves = omap3xxx_wd_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_wd_timer2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
/*
* XXX: Use software supervised mode, HW supervised smartidle seems to
* block CORE power domain idle transitions. Maybe a HW bug in wdt2?
@@ -1213,7 +1221,6 @@
.slaves = omap3xxx_uart1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_uart1_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* UART2 */
@@ -1239,7 +1246,6 @@
.slaves = omap3xxx_uart2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_uart2_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* UART3 */
@@ -1265,7 +1271,6 @@
.slaves = omap3xxx_uart3_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_uart3_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* UART4 */
@@ -1302,7 +1307,6 @@
.slaves = omap3xxx_uart4_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_uart4_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1),
};
static struct omap_hwmod_class i2c_class = {
@@ -1390,7 +1394,6 @@
.slaves_cnt = ARRAY_SIZE(omap3430es1_dss_slaves),
.masters = omap3xxx_dss_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1),
.flags = HWMOD_NO_IDLEST,
};
@@ -1415,8 +1418,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_slaves),
.masters = omap3xxx_dss_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2 |
- CHIP_IS_OMAP3630ES1 | CHIP_GE_OMAP3630ES1_1),
};
/* l4_core -> dss_dispc */
@@ -1454,9 +1455,6 @@
},
.slaves = omap3xxx_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dispc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
- CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 |
- CHIP_GE_OMAP3630ES1_1),
.flags = HWMOD_NO_IDLEST,
};
@@ -1518,9 +1516,6 @@
},
.slaves = omap3xxx_dss_dsi1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dsi1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
- CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 |
- CHIP_GE_OMAP3630ES1_1),
.flags = HWMOD_NO_IDLEST,
};
@@ -1558,9 +1553,6 @@
},
.slaves = omap3xxx_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_rfbi_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
- CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 |
- CHIP_GE_OMAP3630ES1_1),
.flags = HWMOD_NO_IDLEST,
};
@@ -1599,9 +1591,6 @@
},
.slaves = omap3xxx_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_venc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
- CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 |
- CHIP_GE_OMAP3630ES1_1),
.flags = HWMOD_NO_IDLEST,
};
@@ -1637,7 +1626,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_i2c1_slaves),
.class = &i2c_class,
.dev_attr = &i2c1_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* I2C2 */
@@ -1672,7 +1660,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_i2c2_slaves),
.class = &i2c_class,
.dev_attr = &i2c2_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* I2C3 */
@@ -1718,7 +1705,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_i2c3_slaves),
.class = &i2c_class,
.dev_attr = &i2c3_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* l4_wkup -> gpio1 */
@@ -1880,7 +1866,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio1_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* gpio2 */
@@ -1912,7 +1897,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio2_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* gpio3 */
@@ -1944,7 +1928,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio3_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* gpio4 */
@@ -1976,7 +1959,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio4_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* gpio5 */
@@ -2013,7 +1995,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio5_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* gpio6 */
@@ -2050,7 +2031,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio6_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* dma_system -> L3 */
@@ -2134,7 +2114,6 @@
.masters = omap3xxx_dma_system_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_dma_system_masters),
.dev_attr = &dma_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.flags = HWMOD_NO_IDLEST,
};
@@ -2207,7 +2186,6 @@
},
.slaves = omap3xxx_mcbsp1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcbsp2 */
@@ -2264,7 +2242,6 @@
.slaves = omap3xxx_mcbsp2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_slaves),
.dev_attr = &omap34xx_mcbsp2_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcbsp3 */
@@ -2321,7 +2298,6 @@
.slaves = omap3xxx_mcbsp3_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_slaves),
.dev_attr = &omap34xx_mcbsp3_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcbsp4 */
@@ -2379,7 +2355,6 @@
},
.slaves = omap3xxx_mcbsp4_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcbsp5 */
@@ -2437,7 +2412,6 @@
},
.slaves = omap3xxx_mcbsp5_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp5_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* 'mcbsp sidetone' class */
@@ -2498,7 +2472,6 @@
},
.slaves = omap3xxx_mcbsp2_sidetone_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_sidetone_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcbsp3_sidetone */
@@ -2547,7 +2520,6 @@
},
.slaves = omap3xxx_mcbsp3_sidetone_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_sidetone_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
@@ -2597,7 +2569,7 @@
.name = "sr1_hwmod",
.class = &omap34xx_smartreflex_hwmod_class,
.main_clk = "sr1_fck",
- .vdd_name = "mpu",
+ .vdd_name = "mpu_iva",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
@@ -2609,9 +2581,6 @@
},
.slaves = omap3_sr1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2 |
- CHIP_IS_OMAP3430ES3_0 |
- CHIP_IS_OMAP3430ES3_1),
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
@@ -2619,7 +2588,7 @@
.name = "sr1_hwmod",
.class = &omap36xx_smartreflex_hwmod_class,
.main_clk = "sr1_fck",
- .vdd_name = "mpu",
+ .vdd_name = "mpu_iva",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
@@ -2631,7 +2600,6 @@
},
.slaves = omap3_sr1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1),
};
/* SR2 */
@@ -2655,9 +2623,6 @@
},
.slaves = omap3_sr2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2 |
- CHIP_IS_OMAP3430ES3_0 |
- CHIP_IS_OMAP3430ES3_1),
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
@@ -2677,7 +2642,6 @@
},
.slaves = omap3_sr2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1),
};
/*
@@ -2745,7 +2709,6 @@
},
.slaves = omap3xxx_mailbox_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mailbox_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* l4 core -> mcspi1 interface */
@@ -2843,7 +2806,6 @@
.slaves_cnt = ARRAY_SIZE(omap34xx_mcspi1_slaves),
.class = &omap34xx_mcspi_class,
.dev_attr = &omap_mcspi1_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcspi2 */
@@ -2873,7 +2835,6 @@
.slaves_cnt = ARRAY_SIZE(omap34xx_mcspi2_slaves),
.class = &omap34xx_mcspi_class,
.dev_attr = &omap_mcspi2_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcspi3 */
@@ -2916,7 +2877,6 @@
.slaves_cnt = ARRAY_SIZE(omap34xx_mcspi3_slaves),
.class = &omap34xx_mcspi_class,
.dev_attr = &omap_mcspi3_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* SPI4 */
@@ -2957,7 +2917,6 @@
.slaves_cnt = ARRAY_SIZE(omap34xx_mcspi4_slaves),
.class = &omap34xx_mcspi_class,
.dev_attr = &omap_mcspi4_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/*
@@ -3014,7 +2973,6 @@
*/
.flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
| HWMOD_SWSUP_MSTANDBY,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* usb_otg_hs */
@@ -3042,7 +3000,6 @@
.slaves = am35xx_usbhsotg_slaves,
.slaves_cnt = ARRAY_SIZE(am35xx_usbhsotg_slaves),
.class = &am35xx_usbotg_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES3_1)
};
/* MMC/SD/SDIO common */
@@ -3108,7 +3065,6 @@
.slaves = omap3xxx_mmc1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mmc1_slaves),
.class = &omap34xx_mmc_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* MMC/SD/SDIO2 */
@@ -3151,7 +3107,6 @@
.slaves = omap3xxx_mmc2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mmc2_slaves),
.class = &omap34xx_mmc_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* MMC/SD/SDIO3 */
@@ -3193,7 +3148,6 @@
.slaves = omap3xxx_mmc3_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mmc3_slaves),
.class = &omap34xx_mmc_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
@@ -3224,10 +3178,7 @@
&omap3xxx_uart1_hwmod,
&omap3xxx_uart2_hwmod,
&omap3xxx_uart3_hwmod,
- &omap3xxx_uart4_hwmod,
/* dss class */
- &omap3430es1_dss_core_hwmod,
- &omap3xxx_dss_core_hwmod,
&omap3xxx_dss_dispc_hwmod,
&omap3xxx_dss_dsi1_hwmod,
&omap3xxx_dss_rfbi_hwmod,
@@ -3239,9 +3190,6 @@
&omap3xxx_i2c3_hwmod,
&omap34xx_sr1_hwmod,
&omap34xx_sr2_hwmod,
- &omap36xx_sr1_hwmod,
- &omap36xx_sr2_hwmod,
-
/* gpio class */
&omap3xxx_gpio1_hwmod,
@@ -3272,16 +3220,96 @@
&omap34xx_mcspi3,
&omap34xx_mcspi4,
- /* usbotg class */
- &omap3xxx_usbhsotg_hwmod,
-
- /* usbotg for am35x */
- &am35xx_usbhsotg_hwmod,
-
NULL,
};
+/* 3430ES1-only hwmods */
+static __initdata struct omap_hwmod *omap3430es1_hwmods[] = {
+ &omap3430es1_dss_core_hwmod,
+ NULL
+};
+
+/* 3430ES2+-only hwmods */
+static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = {
+ &omap3xxx_dss_core_hwmod,
+ &omap3xxx_usbhsotg_hwmod,
+ NULL
+};
+
+/* 34xx-only hwmods (all ES revisions) */
+static __initdata struct omap_hwmod *omap34xx_hwmods[] = {
+ &omap34xx_sr1_hwmod,
+ &omap34xx_sr2_hwmod,
+ NULL
+};
+
+/* 36xx-only hwmods (all ES revisions) */
+static __initdata struct omap_hwmod *omap36xx_hwmods[] = {
+ &omap3xxx_uart4_hwmod,
+ &omap3xxx_dss_core_hwmod,
+ &omap36xx_sr1_hwmod,
+ &omap36xx_sr2_hwmod,
+ &omap3xxx_usbhsotg_hwmod,
+ NULL
+};
+
+static __initdata struct omap_hwmod *am35xx_hwmods[] = {
+ &omap3xxx_dss_core_hwmod, /* XXX ??? */
+ &am35xx_usbhsotg_hwmod,
+ NULL
+};
+
int __init omap3xxx_hwmod_init(void)
{
- return omap_hwmod_register(omap3xxx_hwmods);
+ int r;
+ struct omap_hwmod **h = NULL;
+ unsigned int rev;
+
+ /* Register hwmods common to all OMAP3 */
+ r = omap_hwmod_register(omap3xxx_hwmods);
+ if (!r)
+ return r;
+
+ rev = omap_rev();
+
+ /*
+ * Register hwmods common to individual OMAP3 families, all
+ * silicon revisions (e.g., 34xx, or AM3505/3517, or 36xx)
+ * All possible revisions should be included in this conditional.
+ */
+ if (rev == OMAP3430_REV_ES1_0 || rev == OMAP3430_REV_ES2_0 ||
+ rev == OMAP3430_REV_ES2_1 || rev == OMAP3430_REV_ES3_0 ||
+ rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) {
+ h = omap34xx_hwmods;
+ } else if (rev == OMAP3517_REV_ES1_0 || rev == OMAP3517_REV_ES1_1) {
+ h = am35xx_hwmods;
+ } else if (rev == OMAP3630_REV_ES1_0 || rev == OMAP3630_REV_ES1_1 ||
+ rev == OMAP3630_REV_ES1_2) {
+ h = omap36xx_hwmods;
+ } else {
+ WARN(1, "OMAP3 hwmod family init: unknown chip type\n");
+ return -EINVAL;
+ };
+
+ r = omap_hwmod_register(h);
+ if (!r)
+ return r;
+
+ /*
+ * Register hwmods specific to certain ES levels of a
+ * particular family of silicon (e.g., 34xx ES1.0)
+ */
+ h = NULL;
+ if (rev == OMAP3430_REV_ES1_0) {
+ h = omap3430es1_hwmods;
+ } else if (rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1 ||
+ rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 ||
+ rev == OMAP3430_REV_ES3_1_2) {
+ h = omap3430es2plus_hwmods;
+ };
+
+ if (h)
+ r = omap_hwmod_register(h);
+
+ return r;
}
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 6201422..393afac 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -29,6 +29,7 @@
#include <plat/mcbsp.h>
#include <plat/mmc.h>
#include <plat/i2c.h>
+#include <plat/dmtimer.h>
#include "omap_hwmod_common_data.h"
@@ -133,7 +134,6 @@
.slaves = omap44xx_dmm_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dmm_slaves),
.mpu_irqs = omap44xx_dmm_irqs,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -189,7 +189,6 @@
},
.slaves = omap44xx_emif_fw_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_emif_fw_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -236,7 +235,6 @@
},
.slaves = omap44xx_l3_instr_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_instr_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l3_main_1 */
@@ -336,7 +334,6 @@
},
.slaves = omap44xx_l3_main_1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l3_main_2 */
@@ -438,7 +435,6 @@
},
.slaves = omap44xx_l3_main_2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l3_main_3 */
@@ -496,7 +492,6 @@
},
.slaves = omap44xx_l3_main_3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -559,7 +554,6 @@
},
.slaves = omap44xx_l4_abe_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_abe_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l4_cfg */
@@ -588,7 +582,6 @@
},
.slaves = omap44xx_l4_cfg_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_cfg_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l4_per */
@@ -617,7 +610,6 @@
},
.slaves = omap44xx_l4_per_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_per_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l4_wkup */
@@ -646,7 +638,6 @@
},
.slaves = omap44xx_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -677,7 +668,6 @@
.clkdm_name = "mpuss_clkdm",
.slaves = omap44xx_mpu_private_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mpu_private_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -828,7 +818,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_aess_slaves),
.masters = omap44xx_aess_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_aess_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -856,7 +845,6 @@
},
.opt_clks = bandgap_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(bandgap_opt_clks),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -917,7 +905,6 @@
},
.slaves = omap44xx_counter_32k_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_counter_32k_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1005,7 +992,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_dma_system_slaves),
.masters = omap44xx_dma_system_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_dma_system_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1098,7 +1084,6 @@
},
.slaves = omap44xx_dmic_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dmic_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1164,7 +1149,6 @@
.rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET,
},
},
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct omap_hwmod omap44xx_dsp_hwmod = {
@@ -1187,7 +1171,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_dsp_slaves),
.masters = omap44xx_dsp_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_dsp_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1278,7 +1261,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_slaves),
.masters = omap44xx_dss_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_dss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1381,7 +1363,6 @@
.opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks),
.slaves = omap44xx_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dispc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1480,7 +1461,6 @@
.opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks),
.slaves = omap44xx_dss_dsi1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* dss_dsi2 */
@@ -1558,7 +1538,6 @@
.opt_clks_cnt = ARRAY_SIZE(dss_dsi2_opt_clks),
.slaves = omap44xx_dss_dsi2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1656,7 +1635,6 @@
.opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks),
.slaves = omap44xx_dss_hdmi_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1748,7 +1726,6 @@
.opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
.slaves = omap44xx_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_rfbi_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1817,7 +1794,6 @@
},
.slaves = omap44xx_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_venc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1901,7 +1877,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* gpio2 */
@@ -1957,7 +1932,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* gpio3 */
@@ -2013,7 +1987,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* gpio4 */
@@ -2069,7 +2042,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* gpio5 */
@@ -2125,7 +2097,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio5_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio5_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* gpio6 */
@@ -2181,7 +2152,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio6_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio6_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2261,7 +2231,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_hsi_slaves),
.masters = omap44xx_hsi_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_hsi_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2345,7 +2314,6 @@
.slaves = omap44xx_i2c1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c1_slaves),
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* i2c2 */
@@ -2402,7 +2370,6 @@
.slaves = omap44xx_i2c2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c2_slaves),
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* i2c3 */
@@ -2459,7 +2426,6 @@
.slaves = omap44xx_i2c3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c3_slaves),
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* i2c4 */
@@ -2516,7 +2482,6 @@
.slaves = omap44xx_i2c4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c4_slaves),
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2577,7 +2542,6 @@
.rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
},
},
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* Pseudo hwmod for reset control purpose only */
@@ -2593,7 +2557,6 @@
.rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
},
},
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct omap_hwmod omap44xx_ipu_hwmod = {
@@ -2616,7 +2579,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_ipu_slaves),
.masters = omap44xx_ipu_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_ipu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2706,7 +2668,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_iss_slaves),
.masters = omap44xx_iss_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_iss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2781,7 +2742,6 @@
.rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET,
},
},
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* Pseudo hwmod for reset control purpose only */
@@ -2797,7 +2757,6 @@
.rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET,
},
},
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct omap_hwmod omap44xx_iva_hwmod = {
@@ -2820,7 +2779,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_iva_slaves),
.masters = omap44xx_iva_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_iva_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2890,7 +2848,6 @@
},
.slaves = omap44xx_kbd_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_kbd_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2956,7 +2913,6 @@
},
.slaves = omap44xx_mailbox_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mailbox_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -3051,7 +3007,6 @@
},
.slaves = omap44xx_mcbsp1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcbsp2 */
@@ -3127,7 +3082,6 @@
},
.slaves = omap44xx_mcbsp2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcbsp3 */
@@ -3203,7 +3157,6 @@
},
.slaves = omap44xx_mcbsp3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcbsp4 */
@@ -3258,7 +3211,6 @@
},
.slaves = omap44xx_mcbsp4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -3353,7 +3305,6 @@
},
.slaves = omap44xx_mcpdm_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcpdm_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -3442,7 +3393,6 @@
.dev_attr = &mcspi1_dev_attr,
.slaves = omap44xx_mcspi1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcspi1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcspi2 */
@@ -3505,7 +3455,6 @@
.dev_attr = &mcspi2_dev_attr,
.slaves = omap44xx_mcspi2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcspi2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcspi3 */
@@ -3568,7 +3517,6 @@
.dev_attr = &mcspi3_dev_attr,
.slaves = omap44xx_mcspi3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcspi3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcspi4 */
@@ -3629,7 +3577,6 @@
.dev_attr = &mcspi4_dev_attr,
.slaves = omap44xx_mcspi4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcspi4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -3718,7 +3665,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_mmc1_slaves),
.masters = omap44xx_mmc1_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_mmc1_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mmc2 */
@@ -3779,7 +3725,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_mmc2_slaves),
.masters = omap44xx_mmc2_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_mmc2_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mmc3 */
@@ -3834,7 +3779,6 @@
},
.slaves = omap44xx_mmc3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mmc3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mmc4 */
@@ -3890,7 +3834,6 @@
},
.slaves = omap44xx_mmc4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mmc4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mmc5 */
@@ -3945,7 +3888,6 @@
},
.slaves = omap44xx_mmc5_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mmc5_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -3987,7 +3929,6 @@
},
.masters = omap44xx_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_mpu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -4063,7 +4004,6 @@
},
.slaves = omap44xx_smartreflex_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* smartreflex_iva */
@@ -4112,7 +4052,6 @@
},
.slaves = omap44xx_smartreflex_iva_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_iva_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* smartreflex_mpu */
@@ -4161,7 +4100,6 @@
},
.slaves = omap44xx_smartreflex_mpu_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_mpu_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -4224,7 +4162,6 @@
},
.slaves = omap44xx_spinlock_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_spinlock_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -4265,6 +4202,16 @@
.sysc = &omap44xx_timer_sysc,
};
+/* always-on timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
+ .timer_capability = OMAP_TIMER_ALWON,
+};
+
+/* pwm timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
+ .timer_capability = OMAP_TIMER_HAS_PWM,
+};
+
/* timer1 */
static struct omap_hwmod omap44xx_timer1_hwmod;
static struct omap_hwmod_irq_info omap44xx_timer1_irqs[] = {
@@ -4308,9 +4255,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer2 */
@@ -4356,9 +4303,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer3 */
@@ -4404,9 +4351,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer4 */
@@ -4452,9 +4399,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer5 */
@@ -4519,9 +4466,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer5_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer5_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer6 */
@@ -4587,9 +4534,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer6_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer6_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer7 */
@@ -4654,9 +4601,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer7_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer7_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer8 */
@@ -4721,9 +4668,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap44xx_timer8_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer8_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer9 */
@@ -4769,9 +4716,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap44xx_timer9_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer9_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer10 */
@@ -4817,9 +4764,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap44xx_timer10_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer10_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer11 */
@@ -4865,9 +4812,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap44xx_timer11_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer11_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -4944,7 +4891,6 @@
},
.slaves = omap44xx_uart1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_uart1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* uart2 */
@@ -4999,7 +4945,6 @@
},
.slaves = omap44xx_uart2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_uart2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* uart3 */
@@ -5055,7 +5000,6 @@
},
.slaves = omap44xx_uart3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_uart3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* uart4 */
@@ -5110,7 +5054,6 @@
},
.slaves = omap44xx_uart4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_uart4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -5195,7 +5138,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_usb_otg_hs_slaves),
.masters = omap44xx_usb_otg_hs_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_usb_otg_hs_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -5266,7 +5208,6 @@
},
.slaves = omap44xx_wd_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* wd_timer3 */
@@ -5333,7 +5274,6 @@
},
.slaves = omap44xx_wd_timer3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c
index 7b9f190..c8b1bef 100644
--- a/arch/arm/mach-omap2/omap_l3_noc.c
+++ b/arch/arm/mach-omap2/omap_l3_noc.c
@@ -1,25 +1,25 @@
/*
- * OMAP4XXX L3 Interconnect error handling driver
- *
- * Copyright (C) 2011 Texas Corporation
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * Sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
+ * OMAP4XXX L3 Interconnect error handling driver
+ *
+ * Copyright (C) 2011 Texas Corporation
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
#include <linux/init.h>
#include <linux/io.h>
#include <linux/platform_device.h>
@@ -55,12 +55,12 @@
static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
{
- struct omap4_l3 *l3 = _l3;
- int inttype, i, j;
+ struct omap4_l3 *l3 = _l3;
+ int inttype, i, k;
int err_src = 0;
- u32 std_err_main_addr, std_err_main, err_reg;
- u32 base, slave_addr, clear;
- char *source_name;
+ u32 std_err_main, err_reg, clear, masterid;
+ void __iomem *base, *l3_targ_base;
+ char *target_name, *master_name = "UN IDENTIFIED";
/* Get the Type of interrupt */
inttype = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
@@ -70,43 +70,50 @@
* Read the regerr register of the clock domain
* to determine the source
*/
- base = (u32)l3->l3_base[i];
- err_reg = readl(base + l3_flagmux[i] + (inttype << 3));
+ base = l3->l3_base[i];
+ err_reg = __raw_readl(base + l3_flagmux[i] +
+ + L3_FLAGMUX_REGERR0 + (inttype << 3));
/* Get the corresponding error and analyse */
if (err_reg) {
/* Identify the source from control status register */
- for (j = 0; !(err_reg & (1 << j)); j++)
- ;
+ err_src = __ffs(err_reg);
- err_src = j;
/* Read the stderrlog_main_source from clk domain */
- std_err_main_addr = base + *(l3_targ[i] + err_src);
- std_err_main = readl(std_err_main_addr);
+ l3_targ_base = base + *(l3_targ[i] + err_src);
+ std_err_main = __raw_readl(l3_targ_base +
+ L3_TARG_STDERRLOG_MAIN);
+ masterid = __raw_readl(l3_targ_base +
+ L3_TARG_STDERRLOG_MSTADDR);
switch (std_err_main & CUSTOM_ERROR) {
case STANDARD_ERROR:
- source_name =
- l3_targ_stderrlog_main_name[i][err_src];
-
- slave_addr = std_err_main_addr +
- L3_SLAVE_ADDRESS_OFFSET;
- WARN(true, "L3 standard error: SOURCE:%s at address 0x%x\n",
- source_name, readl(slave_addr));
+ target_name =
+ l3_targ_inst_name[i][err_src];
+ WARN(true, "L3 standard error: TARGET:%s at address 0x%x\n",
+ target_name,
+ __raw_readl(l3_targ_base +
+ L3_TARG_STDERRLOG_SLVOFSLSB));
/* clear the std error log*/
clear = std_err_main | CLEAR_STDERR_LOG;
- writel(clear, std_err_main_addr);
+ writel(clear, l3_targ_base +
+ L3_TARG_STDERRLOG_MAIN);
break;
case CUSTOM_ERROR:
- source_name =
- l3_targ_stderrlog_main_name[i][err_src];
-
- WARN(true, "CUSTOM SRESP error with SOURCE:%s\n",
- source_name);
+ target_name =
+ l3_targ_inst_name[i][err_src];
+ for (k = 0; k < NUM_OF_L3_MASTERS; k++) {
+ if (masterid == l3_masters[k].id)
+ master_name =
+ l3_masters[k].name;
+ }
+ WARN(true, "L3 custom error: MASTER:%s TARGET:%s\n",
+ master_name, target_name);
/* clear the std error log*/
clear = std_err_main | CLEAR_STDERR_LOG;
- writel(clear, std_err_main_addr);
+ writel(clear, l3_targ_base +
+ L3_TARG_STDERRLOG_MAIN);
break;
default:
@@ -120,12 +127,11 @@
return IRQ_HANDLED;
}
-static int __init omap4_l3_probe(struct platform_device *pdev)
+static int __devinit omap4_l3_probe(struct platform_device *pdev)
{
- static struct omap4_l3 *l3;
- struct resource *res;
- int ret;
- int irq;
+ static struct omap4_l3 *l3;
+ struct resource *res;
+ int ret;
l3 = kzalloc(sizeof(*l3), GFP_KERNEL);
if (!l3)
@@ -177,27 +183,25 @@
/*
* Setup interrupt Handlers
*/
- irq = platform_get_irq(pdev, 0);
- ret = request_irq(irq,
+ l3->debug_irq = platform_get_irq(pdev, 0);
+ ret = request_irq(l3->debug_irq,
l3_interrupt_handler,
IRQF_DISABLED, "l3-dbg-irq", l3);
if (ret) {
pr_crit("L3: request_irq failed to register for 0x%x\n",
- OMAP44XX_IRQ_L3_DBG);
+ OMAP44XX_IRQ_L3_DBG);
goto err3;
}
- l3->debug_irq = irq;
- irq = platform_get_irq(pdev, 1);
- ret = request_irq(irq,
+ l3->app_irq = platform_get_irq(pdev, 1);
+ ret = request_irq(l3->app_irq,
l3_interrupt_handler,
IRQF_DISABLED, "l3-app-irq", l3);
if (ret) {
pr_crit("L3: request_irq failed to register for 0x%x\n",
- OMAP44XX_IRQ_L3_APP);
+ OMAP44XX_IRQ_L3_APP);
goto err4;
}
- l3->app_irq = irq;
return 0;
@@ -214,9 +218,9 @@
return ret;
}
-static int __exit omap4_l3_remove(struct platform_device *pdev)
+static int __devexit omap4_l3_remove(struct platform_device *pdev)
{
- struct omap4_l3 *l3 = platform_get_drvdata(pdev);
+ struct omap4_l3 *l3 = platform_get_drvdata(pdev);
free_irq(l3->app_irq, l3);
free_irq(l3->debug_irq, l3);
@@ -228,16 +232,29 @@
return 0;
}
+#if defined(CONFIG_OF)
+static const struct of_device_id l3_noc_match[] = {
+ {.compatible = "ti,omap4-l3-noc", },
+ {},
+}
+MODULE_DEVICE_TABLE(of, l3_noc_match);
+#else
+#define l3_noc_match NULL
+#endif
+
static struct platform_driver omap4_l3_driver = {
- .remove = __exit_p(omap4_l3_remove),
+ .probe = omap4_l3_probe,
+ .remove = __devexit_p(omap4_l3_remove),
.driver = {
- .name = "omap_l3_noc",
+ .name = "omap_l3_noc",
+ .owner = THIS_MODULE,
+ .of_match_table = l3_noc_match,
},
};
static int __init omap4_l3_init(void)
{
- return platform_driver_probe(&omap4_l3_driver, omap4_l3_probe);
+ return platform_driver_register(&omap4_l3_driver);
}
postcore_initcall_sync(omap4_l3_init);
diff --git a/arch/arm/mach-omap2/omap_l3_noc.h b/arch/arm/mach-omap2/omap_l3_noc.h
index 359b833..90b5098 100644
--- a/arch/arm/mach-omap2/omap_l3_noc.h
+++ b/arch/arm/mach-omap2/omap_l3_noc.h
@@ -1,132 +1,162 @@
- /*
- * OMAP4XXX L3 Interconnect error handling driver header
- *
- * Copyright (C) 2011 Texas Corporation
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
+/*
+ * OMAP4XXX L3 Interconnect error handling driver header
+ *
+ * Copyright (C) 2011 Texas Corporation
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
#ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
#define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
-/*
- * L3 register offsets
- */
#define L3_MODULES 3
#define CLEAR_STDERR_LOG (1 << 31)
#define CUSTOM_ERROR 0x2
#define STANDARD_ERROR 0x0
#define INBAND_ERROR 0x0
-#define EMIF_KERRLOG_OFFSET 0x10
-#define L3_SLAVE_ADDRESS_OFFSET 0x14
-#define LOGICAL_ADDR_ERRORLOG 0x4
#define L3_APPLICATION_ERROR 0x0
#define L3_DEBUG_ERROR 0x1
-u32 l3_flagmux[L3_MODULES] = {
- 0x50C,
- 0x100C,
- 0X020C
+/* L3 TARG register offsets */
+#define L3_TARG_STDERRLOG_MAIN 0x48
+#define L3_TARG_STDERRLOG_SLVOFSLSB 0x5c
+#define L3_TARG_STDERRLOG_MSTADDR 0x68
+#define L3_FLAGMUX_REGERR0 0xc
+
+#define NUM_OF_L3_MASTERS (sizeof(l3_masters)/sizeof(l3_masters[0]))
+
+static u32 l3_flagmux[L3_MODULES] = {
+ 0x500,
+ 0x1000,
+ 0X0200
};
-/*
- * L3 Target standard Error register offsets
- */
-u32 l3_targ_stderrlog_main_clk1[] = {
- 0x148, /* DMM1 */
- 0x248, /* DMM2 */
- 0x348, /* ABE */
- 0x448, /* L4CFG */
- 0x648 /* CLK2 PWR DISC */
+/* L3 Target standard Error register offsets */
+static u32 l3_targ_inst_clk1[] = {
+ 0x100, /* DMM1 */
+ 0x200, /* DMM2 */
+ 0x300, /* ABE */
+ 0x400, /* L4CFG */
+ 0x600 /* CLK2 PWR DISC */
};
-u32 l3_targ_stderrlog_main_clk2[] = {
- 0x548, /* CORTEX M3 */
- 0x348, /* DSS */
- 0x148, /* GPMC */
- 0x448, /* ISS */
- 0x748, /* IVAHD */
- 0xD48, /* missing in TRM corresponds to AES1*/
- 0x948, /* L4 PER0*/
- 0x248, /* OCMRAM */
- 0x148, /* missing in TRM corresponds to GPMC sERROR*/
- 0x648, /* SGX */
- 0x848, /* SL2 */
- 0x1648, /* C2C */
- 0x1148, /* missing in TRM corresponds PWR DISC CLK1*/
- 0xF48, /* missing in TRM corrsponds to SHA1*/
- 0xE48, /* missing in TRM corresponds to AES2*/
- 0xC48, /* L4 PER3 */
- 0xA48, /* L4 PER1*/
- 0xB48 /* L4 PER2*/
+static u32 l3_targ_inst_clk2[] = {
+ 0x500, /* CORTEX M3 */
+ 0x300, /* DSS */
+ 0x100, /* GPMC */
+ 0x400, /* ISS */
+ 0x700, /* IVAHD */
+ 0xD00, /* missing in TRM corresponds to AES1*/
+ 0x900, /* L4 PER0*/
+ 0x200, /* OCMRAM */
+ 0x100, /* missing in TRM corresponds to GPMC sERROR*/
+ 0x600, /* SGX */
+ 0x800, /* SL2 */
+ 0x1600, /* C2C */
+ 0x1100, /* missing in TRM corresponds PWR DISC CLK1*/
+ 0xF00, /* missing in TRM corrsponds to SHA1*/
+ 0xE00, /* missing in TRM corresponds to AES2*/
+ 0xC00, /* L4 PER3 */
+ 0xA00, /* L4 PER1*/
+ 0xB00 /* L4 PER2*/
};
-u32 l3_targ_stderrlog_main_clk3[] = {
- 0x0148 /* EMUSS */
+static u32 l3_targ_inst_clk3[] = {
+ 0x0100 /* EMUSS */
};
-char *l3_targ_stderrlog_main_name[L3_MODULES][18] = {
+static struct l3_masters_data {
+ u32 id;
+ char name[10];
+} l3_masters[] = {
+ { 0x0 , "MPU"},
+ { 0x10, "CS_ADP"},
+ { 0x14, "xxx"},
+ { 0x20, "DSP"},
+ { 0x30, "IVAHD"},
+ { 0x40, "ISS"},
+ { 0x44, "DucatiM3"},
+ { 0x48, "FaceDetect"},
+ { 0x50, "SDMA_Rd"},
+ { 0x54, "SDMA_Wr"},
+ { 0x58, "xxx"},
+ { 0x5C, "xxx"},
+ { 0x60, "SGX"},
+ { 0x70, "DSS"},
+ { 0x80, "C2C"},
+ { 0x88, "xxx"},
+ { 0x8C, "xxx"},
+ { 0x90, "HSI"},
+ { 0xA0, "MMC1"},
+ { 0xA4, "MMC2"},
+ { 0xA8, "MMC6"},
+ { 0xB0, "UNIPRO1"},
+ { 0xC0, "USBHOSTHS"},
+ { 0xC4, "USBOTGHS"},
+ { 0xC8, "USBHOSTFS"}
+};
+
+static char *l3_targ_inst_name[L3_MODULES][18] = {
{
- "DMM1",
- "DMM2",
- "ABE",
- "L4CFG",
- "CLK2 PWR DISC",
+ "DMM1",
+ "DMM2",
+ "ABE",
+ "L4CFG",
+ "CLK2 PWR DISC",
},
{
- "CORTEX M3" ,
- "DSS ",
- "GPMC ",
- "ISS ",
- "IVAHD ",
- "AES1",
- "L4 PER0",
- "OCMRAM ",
- "GPMC sERROR",
- "SGX ",
- "SL2 ",
- "C2C ",
- "PWR DISC CLK1",
- "SHA1",
- "AES2",
- "L4 PER3",
- "L4 PER1",
- "L4 PER2",
+ "CORTEX M3" ,
+ "DSS ",
+ "GPMC ",
+ "ISS ",
+ "IVAHD ",
+ "AES1",
+ "L4 PER0",
+ "OCMRAM ",
+ "GPMC sERROR",
+ "SGX ",
+ "SL2 ",
+ "C2C ",
+ "PWR DISC CLK1",
+ "SHA1",
+ "AES2",
+ "L4 PER3",
+ "L4 PER1",
+ "L4 PER2",
},
{
- "EMUSS",
+ "EMUSS",
},
};
-u32 *l3_targ[L3_MODULES] = {
- l3_targ_stderrlog_main_clk1,
- l3_targ_stderrlog_main_clk2,
- l3_targ_stderrlog_main_clk3,
+static u32 *l3_targ[L3_MODULES] = {
+ l3_targ_inst_clk1,
+ l3_targ_inst_clk2,
+ l3_targ_inst_clk3,
};
struct omap4_l3 {
- struct device *dev;
- struct clk *ick;
+ struct device *dev;
+ struct clk *ick;
/* memory base */
- void __iomem *l3_base[4];
+ void __iomem *l3_base[L3_MODULES];
- int debug_irq;
- int app_irq;
+ int debug_irq;
+ int app_irq;
};
-
#endif
diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c
index 873c0e3..a05a62f 100644
--- a/arch/arm/mach-omap2/omap_l3_smx.c
+++ b/arch/arm/mach-omap2/omap_l3_smx.c
@@ -1,26 +1,26 @@
- /*
- * OMAP3XXX L3 Interconnect Driver
- *
- * Copyright (C) 2011 Texas Corporation
- * Felipe Balbi <balbi@ti.com>
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * Sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
+/*
+ * OMAP3XXX L3 Interconnect Driver
+ *
+ * Copyright (C) 2011 Texas Corporation
+ * Felipe Balbi <balbi@ti.com>
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
#include <linux/kernel.h>
#include <linux/slab.h>
@@ -135,7 +135,7 @@
}
}
-/**
+/*
* omap3_l3_block_irq - handles a register block's irq
* @l3: struct omap3_l3 *
* @base: register block base address
@@ -150,30 +150,29 @@
static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3,
u64 error, int error_addr)
{
- u8 code = omap3_l3_decode_error_code(error);
- u8 initid = omap3_l3_decode_initid(error);
- u8 multi = error & L3_ERROR_LOG_MULTI;
- u32 address = omap3_l3_decode_addr(error_addr);
+ u8 code = omap3_l3_decode_error_code(error);
+ u8 initid = omap3_l3_decode_initid(error);
+ u8 multi = error & L3_ERROR_LOG_MULTI;
+ u32 address = omap3_l3_decode_addr(error_addr);
WARN(true, "%s seen by %s %s at address %x\n",
- omap3_l3_code_string(code),
- omap3_l3_initiator_string(initid),
- multi ? "Multiple Errors" : "",
- address);
+ omap3_l3_code_string(code),
+ omap3_l3_initiator_string(initid),
+ multi ? "Multiple Errors" : "", address);
return IRQ_HANDLED;
}
static irqreturn_t omap3_l3_app_irq(int irq, void *_l3)
{
- struct omap3_l3 *l3 = _l3;
- u64 status, clear;
- u64 error;
- u64 error_addr;
- u64 err_source = 0;
- void __iomem *base;
- int int_type;
- irqreturn_t ret = IRQ_NONE;
+ struct omap3_l3 *l3 = _l3;
+ u64 status, clear;
+ u64 error;
+ u64 error_addr;
+ u64 err_source = 0;
+ void __iomem *base;
+ int int_type;
+ irqreturn_t ret = IRQ_NONE;
int_type = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
if (!int_type) {
@@ -191,14 +190,12 @@
}
/* identify the error source */
- for (err_source = 0; !(status & (1 << err_source)); err_source++)
- ;
+ err_source = __ffs(status);
- base = l3->rt + *(omap3_l3_bases[int_type] + err_source);
+ base = l3->rt + omap3_l3_bases[int_type][err_source];
error = omap3_l3_readll(base, L3_ERROR_LOG);
if (error) {
error_addr = omap3_l3_readll(base, L3_ERROR_LOG_ADDR);
-
ret |= omap3_l3_block_irq(l3, error, error_addr);
}
@@ -215,9 +212,9 @@
static int __init omap3_l3_probe(struct platform_device *pdev)
{
- struct omap3_l3 *l3;
- struct resource *res;
- int ret;
+ struct omap3_l3 *l3;
+ struct resource *res;
+ int ret;
l3 = kzalloc(sizeof(*l3), GFP_KERNEL);
if (!l3)
diff --git a/arch/arm/mach-omap2/omap_l3_smx.h b/arch/arm/mach-omap2/omap_l3_smx.h
index ba2ed9a..4f3cebc 100644
--- a/arch/arm/mach-omap2/omap_l3_smx.h
+++ b/arch/arm/mach-omap2/omap_l3_smx.h
@@ -1,26 +1,26 @@
- /*
- * OMAP3XXX L3 Interconnect Driver header
- *
- * Copyright (C) 2011 Texas Corporation
- * Felipe Balbi <balbi@ti.com>
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
+/*
+ * OMAP3XXX L3 Interconnect Driver header
+ *
+ * Copyright (C) 2011 Texas Corporation
+ * Felipe Balbi <balbi@ti.com>
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
#ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
#define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
@@ -40,7 +40,7 @@
#define L3_SI_CONTROL 0x020
#define L3_SI_FLAG_STATUS_0 0x510
-const u64 shift = 1;
+static const u64 shift = 1;
#define L3_STATUS_0_MPUIA_BRST (shift << 0)
#define L3_STATUS_0_MPUIA_RSP (shift << 1)
@@ -78,32 +78,32 @@
#define L3_STATUS_0_L4EMUTA_REQ (shift << 60)
#define L3_STATUS_0_MAD2DTA_REQ (shift << 61)
-#define L3_STATUS_0_TIMEOUT_MASK (L3_STATUS_0_MPUIA_BRST \
- | L3_STATUS_0_MPUIA_RSP \
- | L3_STATUS_0_IVAIA_BRST \
- | L3_STATUS_0_IVAIA_RSP \
- | L3_STATUS_0_SGXIA_BRST \
- | L3_STATUS_0_SGXIA_RSP \
- | L3_STATUS_0_CAMIA_BRST \
- | L3_STATUS_0_CAMIA_RSP \
- | L3_STATUS_0_DISPIA_BRST \
- | L3_STATUS_0_DISPIA_RSP \
- | L3_STATUS_0_DMARDIA_BRST \
- | L3_STATUS_0_DMARDIA_RSP \
- | L3_STATUS_0_DMAWRIA_BRST \
- | L3_STATUS_0_DMAWRIA_RSP \
- | L3_STATUS_0_USBOTGIA_BRST \
- | L3_STATUS_0_USBOTGIA_RSP \
- | L3_STATUS_0_USBHOSTIA_BRST \
- | L3_STATUS_0_SMSTA_REQ \
- | L3_STATUS_0_GPMCTA_REQ \
- | L3_STATUS_0_OCMRAMTA_REQ \
- | L3_STATUS_0_OCMROMTA_REQ \
- | L3_STATUS_0_IVATA_REQ \
- | L3_STATUS_0_SGXTA_REQ \
- | L3_STATUS_0_L4CORETA_REQ \
- | L3_STATUS_0_L4PERTA_REQ \
- | L3_STATUS_0_L4EMUTA_REQ \
+#define L3_STATUS_0_TIMEOUT_MASK (L3_STATUS_0_MPUIA_BRST \
+ | L3_STATUS_0_MPUIA_RSP \
+ | L3_STATUS_0_IVAIA_BRST \
+ | L3_STATUS_0_IVAIA_RSP \
+ | L3_STATUS_0_SGXIA_BRST \
+ | L3_STATUS_0_SGXIA_RSP \
+ | L3_STATUS_0_CAMIA_BRST \
+ | L3_STATUS_0_CAMIA_RSP \
+ | L3_STATUS_0_DISPIA_BRST \
+ | L3_STATUS_0_DISPIA_RSP \
+ | L3_STATUS_0_DMARDIA_BRST \
+ | L3_STATUS_0_DMARDIA_RSP \
+ | L3_STATUS_0_DMAWRIA_BRST \
+ | L3_STATUS_0_DMAWRIA_RSP \
+ | L3_STATUS_0_USBOTGIA_BRST \
+ | L3_STATUS_0_USBOTGIA_RSP \
+ | L3_STATUS_0_USBHOSTIA_BRST \
+ | L3_STATUS_0_SMSTA_REQ \
+ | L3_STATUS_0_GPMCTA_REQ \
+ | L3_STATUS_0_OCMRAMTA_REQ \
+ | L3_STATUS_0_OCMROMTA_REQ \
+ | L3_STATUS_0_IVATA_REQ \
+ | L3_STATUS_0_SGXTA_REQ \
+ | L3_STATUS_0_L4CORETA_REQ \
+ | L3_STATUS_0_L4PERTA_REQ \
+ | L3_STATUS_0_L4EMUTA_REQ \
| L3_STATUS_0_MAD2DTA_REQ)
#define L3_SI_FLAG_STATUS_1 0x530
@@ -137,19 +137,19 @@
enum omap3_l3_initiator_id {
/* LCD has 1 ID */
- OMAP_L3_LCD = 29,
+ OMAP_L3_LCD = 29,
/* SAD2D has 1 ID */
- OMAP_L3_SAD2D = 28,
+ OMAP_L3_SAD2D = 28,
/* MPU has 5 IDs */
- OMAP_L3_IA_MPU_SS_1 = 27,
- OMAP_L3_IA_MPU_SS_2 = 26,
- OMAP_L3_IA_MPU_SS_3 = 25,
- OMAP_L3_IA_MPU_SS_4 = 24,
- OMAP_L3_IA_MPU_SS_5 = 23,
+ OMAP_L3_IA_MPU_SS_1 = 27,
+ OMAP_L3_IA_MPU_SS_2 = 26,
+ OMAP_L3_IA_MPU_SS_3 = 25,
+ OMAP_L3_IA_MPU_SS_4 = 24,
+ OMAP_L3_IA_MPU_SS_5 = 23,
/* IVA2.2 SS has 3 IDs*/
- OMAP_L3_IA_IVA_SS_1 = 22,
- OMAP_L3_IA_IVA_SS_2 = 21,
- OMAP_L3_IA_IVA_SS_3 = 20,
+ OMAP_L3_IA_IVA_SS_1 = 22,
+ OMAP_L3_IA_IVA_SS_2 = 21,
+ OMAP_L3_IA_IVA_SS_3 = 20,
/* IVA 2.2 SS DMA has 6 IDS */
OMAP_L3_IA_IVA_SS_DMA_1 = 19,
OMAP_L3_IA_IVA_SS_DMA_2 = 18,
@@ -158,25 +158,25 @@
OMAP_L3_IA_IVA_SS_DMA_5 = 15,
OMAP_L3_IA_IVA_SS_DMA_6 = 14,
/* SGX has 1 ID */
- OMAP_L3_IA_SGX = 13,
+ OMAP_L3_IA_SGX = 13,
/* CAM has 3 ID */
- OMAP_L3_IA_CAM_1 = 12,
- OMAP_L3_IA_CAM_2 = 11,
- OMAP_L3_IA_CAM_3 = 10,
+ OMAP_L3_IA_CAM_1 = 12,
+ OMAP_L3_IA_CAM_2 = 11,
+ OMAP_L3_IA_CAM_3 = 10,
/* DAP has 1 ID */
- OMAP_L3_IA_DAP = 9,
+ OMAP_L3_IA_DAP = 9,
/* SDMA WR has 2 IDs */
- OMAP_L3_SDMA_WR_1 = 8,
- OMAP_L3_SDMA_WR_2 = 7,
+ OMAP_L3_SDMA_WR_1 = 8,
+ OMAP_L3_SDMA_WR_2 = 7,
/* SDMA RD has 4 IDs */
- OMAP_L3_SDMA_RD_1 = 6,
- OMAP_L3_SDMA_RD_2 = 5,
- OMAP_L3_SDMA_RD_3 = 4,
- OMAP_L3_SDMA_RD_4 = 3,
+ OMAP_L3_SDMA_RD_1 = 6,
+ OMAP_L3_SDMA_RD_2 = 5,
+ OMAP_L3_SDMA_RD_3 = 4,
+ OMAP_L3_SDMA_RD_4 = 3,
/* HSUSB OTG has 1 ID */
- OMAP_L3_USBOTG = 2,
+ OMAP_L3_USBOTG = 2,
/* HSUSB HOST has 1 ID */
- OMAP_L3_USBHOST = 1,
+ OMAP_L3_USBHOST = 1,
};
enum omap3_l3_code {
@@ -192,21 +192,21 @@
};
struct omap3_l3 {
- struct device *dev;
- struct clk *ick;
+ struct device *dev;
+ struct clk *ick;
/* memory base*/
- void __iomem *rt;
+ void __iomem *rt;
- int debug_irq;
- int app_irq;
+ int debug_irq;
+ int app_irq;
/* true when and inband functional error occurs */
- unsigned inband:1;
+ unsigned inband:1;
};
/* offsets for l3 agents in order with the Flag status register */
-unsigned int __iomem omap3_l3_app_bases[] = {
+static unsigned int omap3_l3_app_bases[] = {
/* MPU IA */
0x1400,
0x1400,
@@ -305,7 +305,7 @@
0,
};
-unsigned int __iomem omap3_l3_debug_bases[] = {
+static unsigned int omap3_l3_debug_bases[] = {
/* MPU DATA IA */
0x1400,
/* RESERVED */
@@ -321,7 +321,7 @@
/* REST RESERVED */
};
-u32 *omap3_l3_bases[] = {
+static u32 *omap3_l3_bases[] = {
omap3_l3_app_bases,
omap3_l3_debug_bases,
};
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index 07d6140..f515a1a 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -42,8 +42,11 @@
#define OMAP4_SRI2C_SLAVE_ADDR 0x12
#define OMAP4_VDD_MPU_SR_VOLT_REG 0x55
+#define OMAP4_VDD_MPU_SR_CMD_REG 0x56
#define OMAP4_VDD_IVA_SR_VOLT_REG 0x5B
+#define OMAP4_VDD_IVA_SR_CMD_REG 0x5C
#define OMAP4_VDD_CORE_SR_VOLT_REG 0x61
+#define OMAP4_VDD_CORE_SR_CMD_REG 0x62
#define OMAP4_VP_CONFIG_ERROROFFSET 0x00
#define OMAP4_VP_VSTEPMIN_VSTEPMIN 0x01
@@ -95,6 +98,8 @@
is_offset_valid = true;
}
+ if (!vsel)
+ return 0;
/*
* There is no specific formula for voltage to vsel
* conversion above 1.3V. There are special hardcoded
@@ -106,9 +111,9 @@
return 1350000;
if (smps_offset & 0x8)
- return ((((vsel - 1) * 125) + 7000)) * 100;
+ return ((((vsel - 1) * 1266) + 70900)) * 10;
else
- return ((((vsel - 1) * 125) + 6000)) * 100;
+ return ((((vsel - 1) * 1266) + 60770)) * 10;
}
static u8 twl6030_uv_to_vsel(unsigned long uv)
@@ -127,6 +132,8 @@
is_offset_valid = true;
}
+ if (!uv)
+ return 0x00;
/*
* There is no specific formula for voltage to vsel
* conversion above 1.3V. There are special hardcoded
@@ -134,16 +141,21 @@
* hardcoding only for 1.35 V which is used for 1GH OPP for
* OMAP4430.
*/
- if (uv == 1350000)
+ if (uv > twl6030_vsel_to_uv(0x39)) {
+ if (uv == 1350000)
+ return 0x3A;
+ pr_err("%s:OUT OF RANGE! non mapped vsel for %ld Vs max %ld\n",
+ __func__, uv, twl6030_vsel_to_uv(0x39));
return 0x3A;
+ }
if (smps_offset & 0x8)
- return DIV_ROUND_UP(uv - 700000, 12500) + 1;
+ return DIV_ROUND_UP(uv - 709000, 12660) + 1;
else
- return DIV_ROUND_UP(uv - 600000, 12500) + 1;
+ return DIV_ROUND_UP(uv - 607700, 12660) + 1;
}
-static struct omap_volt_pmic_info omap3_mpu_volt_info = {
+static struct omap_voltdm_pmic omap3_mpu_pmic = {
.slew_rate = 4000,
.step_size = 12500,
.on_volt = 1200000,
@@ -158,12 +170,13 @@
.vp_vddmax = OMAP3430_VP1_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
- .pmic_reg = OMAP3_VDD_MPU_SR_CONTROL_REG,
+ .volt_reg_addr = OMAP3_VDD_MPU_SR_CONTROL_REG,
+ .i2c_high_speed = true,
.vsel_to_uv = twl4030_vsel_to_uv,
.uv_to_vsel = twl4030_uv_to_vsel,
};
-static struct omap_volt_pmic_info omap3_core_volt_info = {
+static struct omap_voltdm_pmic omap3_core_pmic = {
.slew_rate = 4000,
.step_size = 12500,
.on_volt = 1200000,
@@ -178,18 +191,19 @@
.vp_vddmax = OMAP3430_VP2_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
- .pmic_reg = OMAP3_VDD_CORE_SR_CONTROL_REG,
+ .volt_reg_addr = OMAP3_VDD_CORE_SR_CONTROL_REG,
+ .i2c_high_speed = true,
.vsel_to_uv = twl4030_vsel_to_uv,
.uv_to_vsel = twl4030_uv_to_vsel,
};
-static struct omap_volt_pmic_info omap4_mpu_volt_info = {
+static struct omap_voltdm_pmic omap4_mpu_pmic = {
.slew_rate = 4000,
- .step_size = 12500,
- .on_volt = 1350000,
- .onlp_volt = 1350000,
- .ret_volt = 837500,
- .off_volt = 600000,
+ .step_size = 12660,
+ .on_volt = 1375000,
+ .onlp_volt = 1375000,
+ .ret_volt = 830000,
+ .off_volt = 0,
.volt_setup_time = 0,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
@@ -198,18 +212,20 @@
.vp_vddmax = OMAP4_VP_MPU_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
- .pmic_reg = OMAP4_VDD_MPU_SR_VOLT_REG,
+ .volt_reg_addr = OMAP4_VDD_MPU_SR_VOLT_REG,
+ .cmd_reg_addr = OMAP4_VDD_MPU_SR_CMD_REG,
+ .i2c_high_speed = true,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
-static struct omap_volt_pmic_info omap4_iva_volt_info = {
+static struct omap_voltdm_pmic omap4_iva_pmic = {
.slew_rate = 4000,
- .step_size = 12500,
- .on_volt = 1100000,
- .onlp_volt = 1100000,
- .ret_volt = 837500,
- .off_volt = 600000,
+ .step_size = 12660,
+ .on_volt = 1188000,
+ .onlp_volt = 1188000,
+ .ret_volt = 830000,
+ .off_volt = 0,
.volt_setup_time = 0,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
@@ -218,18 +234,20 @@
.vp_vddmax = OMAP4_VP_IVA_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
- .pmic_reg = OMAP4_VDD_IVA_SR_VOLT_REG,
+ .volt_reg_addr = OMAP4_VDD_IVA_SR_VOLT_REG,
+ .cmd_reg_addr = OMAP4_VDD_IVA_SR_CMD_REG,
+ .i2c_high_speed = true,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
-static struct omap_volt_pmic_info omap4_core_volt_info = {
+static struct omap_voltdm_pmic omap4_core_pmic = {
.slew_rate = 4000,
- .step_size = 12500,
- .on_volt = 1100000,
- .onlp_volt = 1100000,
- .ret_volt = 837500,
- .off_volt = 600000,
+ .step_size = 12660,
+ .on_volt = 1200000,
+ .onlp_volt = 1200000,
+ .ret_volt = 830000,
+ .off_volt = 0,
.volt_setup_time = 0,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
@@ -238,7 +256,8 @@
.vp_vddmax = OMAP4_VP_CORE_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
- .pmic_reg = OMAP4_VDD_CORE_SR_VOLT_REG,
+ .volt_reg_addr = OMAP4_VDD_CORE_SR_VOLT_REG,
+ .cmd_reg_addr = OMAP4_VDD_CORE_SR_CMD_REG,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
@@ -250,14 +269,14 @@
if (!cpu_is_omap44xx())
return -ENODEV;
- voltdm = omap_voltage_domain_lookup("mpu");
- omap_voltage_register_pmic(voltdm, &omap4_mpu_volt_info);
+ voltdm = voltdm_lookup("mpu");
+ omap_voltage_register_pmic(voltdm, &omap4_mpu_pmic);
- voltdm = omap_voltage_domain_lookup("iva");
- omap_voltage_register_pmic(voltdm, &omap4_iva_volt_info);
+ voltdm = voltdm_lookup("iva");
+ omap_voltage_register_pmic(voltdm, &omap4_iva_pmic);
- voltdm = omap_voltage_domain_lookup("core");
- omap_voltage_register_pmic(voltdm, &omap4_core_volt_info);
+ voltdm = voltdm_lookup("core");
+ omap_voltage_register_pmic(voltdm, &omap4_core_pmic);
return 0;
}
@@ -270,10 +289,10 @@
return -ENODEV;
if (cpu_is_omap3630()) {
- omap3_mpu_volt_info.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN;
- omap3_mpu_volt_info.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX;
- omap3_core_volt_info.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN;
- omap3_core_volt_info.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX;
+ omap3_mpu_pmic.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN;
+ omap3_mpu_pmic.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX;
+ omap3_core_pmic.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN;
+ omap3_core_pmic.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX;
}
/*
@@ -288,11 +307,11 @@
if (!twl_sr_enable_autoinit)
omap3_twl_set_sr_bit(true);
- voltdm = omap_voltage_domain_lookup("mpu");
- omap_voltage_register_pmic(voltdm, &omap3_mpu_volt_info);
+ voltdm = voltdm_lookup("mpu_iva");
+ omap_voltage_register_pmic(voltdm, &omap3_mpu_pmic);
- voltdm = omap_voltage_domain_lookup("core");
- omap_voltage_register_pmic(voltdm, &omap3_core_volt_info);
+ voltdm = voltdm_lookup("core");
+ omap_voltage_register_pmic(voltdm, &omap3_core_pmic);
return 0;
}
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
index ab8b35b..9262a6b 100644
--- a/arch/arm/mach-omap2/opp.c
+++ b/arch/arm/mach-omap2/opp.c
@@ -69,7 +69,7 @@
opp_def->hwmod_name, i);
return -EINVAL;
}
- dev = &oh->od->pdev.dev;
+ dev = &oh->od->pdev->dev;
r = opp_add(dev, opp_def->freq, opp_def->u_volt);
if (r) {
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 472bf22..2ab7a9e 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -26,54 +26,21 @@
static struct omap_device_pm_latency *pm_lats;
-static struct device *mpu_dev;
-static struct device *iva_dev;
-static struct device *l3_dev;
-static struct device *dsp_dev;
-
-struct device *omap2_get_mpuss_device(void)
-{
- WARN_ON_ONCE(!mpu_dev);
- return mpu_dev;
-}
-
-struct device *omap2_get_iva_device(void)
-{
- WARN_ON_ONCE(!iva_dev);
- return iva_dev;
-}
-
-struct device *omap2_get_l3_device(void)
-{
- WARN_ON_ONCE(!l3_dev);
- return l3_dev;
-}
-
-struct device *omap4_get_dsp_device(void)
-{
- WARN_ON_ONCE(!dsp_dev);
- return dsp_dev;
-}
-EXPORT_SYMBOL(omap4_get_dsp_device);
-
-/* static int _init_omap_device(struct omap_hwmod *oh, void *user) */
-static int _init_omap_device(char *name, struct device **new_dev)
+static int _init_omap_device(char *name)
{
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
oh = omap_hwmod_lookup(name);
if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",
__func__, name))
return -ENODEV;
- od = omap_device_build(oh->name, 0, oh, NULL, 0, pm_lats, 0, false);
- if (WARN(IS_ERR(od), "%s: could not build omap_device for %s\n",
+ pdev = omap_device_build(oh->name, 0, oh, NULL, 0, pm_lats, 0, false);
+ if (WARN(IS_ERR(pdev), "%s: could not build omap_device for %s\n",
__func__, name))
return -ENODEV;
- *new_dev = &od->pdev.dev;
-
return 0;
}
@@ -82,16 +49,16 @@
*/
static void omap2_init_processor_devices(void)
{
- _init_omap_device("mpu", &mpu_dev);
+ _init_omap_device("mpu");
if (omap3_has_iva())
- _init_omap_device("iva", &iva_dev);
+ _init_omap_device("iva");
if (cpu_is_omap44xx()) {
- _init_omap_device("l3_main_1", &l3_dev);
- _init_omap_device("dsp", &dsp_dev);
- _init_omap_device("iva", &iva_dev);
+ _init_omap_device("l3_main_1");
+ _init_omap_device("dsp");
+ _init_omap_device("iva");
} else {
- _init_omap_device("l3_main", &l3_dev);
+ _init_omap_device("l3_main");
}
}
@@ -136,8 +103,8 @@
ret = pwrdm_set_next_pwrst(pwrdm, state);
if (ret) {
- printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
- pwrdm->name);
+ pr_err("%s: unable to set state of powerdomain: %s\n",
+ __func__, pwrdm->name);
goto err;
}
@@ -161,37 +128,44 @@
}
/*
- * This API is to be called during init to put the various voltage
+ * This API is to be called during init to set the various voltage
* domains to the voltage as per the opp table. Typically we boot up
* at the nominal voltage. So this function finds out the rate of
* the clock associated with the voltage domain, finds out the correct
- * opp entry and puts the voltage domain to the voltage specifies
+ * opp entry and sets the voltage domain to the voltage specified
* in the opp entry
*/
static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
- struct device *dev)
+ const char *oh_name)
{
struct voltagedomain *voltdm;
struct clk *clk;
struct opp *opp;
unsigned long freq, bootup_volt;
+ struct device *dev;
- if (!vdd_name || !clk_name || !dev) {
- printk(KERN_ERR "%s: Invalid parameters!\n", __func__);
+ if (!vdd_name || !clk_name || !oh_name) {
+ pr_err("%s: invalid parameters\n", __func__);
goto exit;
}
- voltdm = omap_voltage_domain_lookup(vdd_name);
+ dev = omap_device_get_by_hwmod_name(oh_name);
+ if (IS_ERR(dev)) {
+ pr_err("%s: Unable to get dev pointer for hwmod %s\n",
+ __func__, oh_name);
+ goto exit;
+ }
+
+ voltdm = voltdm_lookup(vdd_name);
if (IS_ERR(voltdm)) {
- printk(KERN_ERR "%s: Unable to get vdd pointer for vdd_%s\n",
+ pr_err("%s: unable to get vdd pointer for vdd_%s\n",
__func__, vdd_name);
goto exit;
}
clk = clk_get(NULL, clk_name);
if (IS_ERR(clk)) {
- printk(KERN_ERR "%s: unable to get clk %s\n",
- __func__, clk_name);
+ pr_err("%s: unable to get clk %s\n", __func__, clk_name);
goto exit;
}
@@ -200,24 +174,23 @@
opp = opp_find_freq_ceil(dev, &freq);
if (IS_ERR(opp)) {
- printk(KERN_ERR "%s: unable to find boot up OPP for vdd_%s\n",
+ pr_err("%s: unable to find boot up OPP for vdd_%s\n",
__func__, vdd_name);
goto exit;
}
bootup_volt = opp_get_voltage(opp);
if (!bootup_volt) {
- printk(KERN_ERR "%s: unable to find voltage corresponding"
+ pr_err("%s: unable to find voltage corresponding "
"to the bootup OPP for vdd_%s\n", __func__, vdd_name);
goto exit;
}
- omap_voltage_scale_vdd(voltdm, bootup_volt);
+ voltdm_scale(voltdm, bootup_volt);
return 0;
exit:
- printk(KERN_ERR "%s: Unable to put vdd_%s to its init voltage\n\n",
- __func__, vdd_name);
+ pr_err("%s: unable to set vdd_%s\n", __func__, vdd_name);
return -EINVAL;
}
@@ -226,8 +199,8 @@
if (!cpu_is_omap34xx())
return;
- omap2_set_init_voltage("mpu", "dpll1_ck", mpu_dev);
- omap2_set_init_voltage("core", "l3_ick", l3_dev);
+ omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu");
+ omap2_set_init_voltage("core", "l3_ick", "l3_main");
}
static void __init omap4_init_voltages(void)
@@ -235,14 +208,15 @@
if (!cpu_is_omap44xx())
return;
- omap2_set_init_voltage("mpu", "dpll_mpu_ck", mpu_dev);
- omap2_set_init_voltage("core", "l3_div_ck", l3_dev);
- omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", iva_dev);
+ omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu");
+ omap2_set_init_voltage("core", "l3_div_ck", "l3_main_1");
+ omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva");
}
static int __init omap2_common_pm_init(void)
{
- omap2_init_processor_devices();
+ if (!of_have_populated_dt())
+ omap2_init_processor_devices();
omap_pm_if_init();
return 0;
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index bf089e7..cf0c216 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -53,8 +53,6 @@
#include "powerdomain.h"
#include "clockdomain.h"
-static int omap2_pm_debug;
-
#ifdef CONFIG_SUSPEND
static suspend_state_t suspend_state = PM_SUSPEND_ON;
static inline bool is_suspending(void)
@@ -96,7 +94,6 @@
static void omap2_enter_full_retention(void)
{
u32 l;
- struct timespec ts_preidle, ts_postidle, ts_idle;
/* There is 1 reference hold for all children of the oscillator
* clock, the following will remove it. If no one else uses the
@@ -124,10 +121,6 @@
omap2_gpio_prepare_for_idle(0);
- if (omap2_pm_debug) {
- getnstimeofday(&ts_preidle);
- }
-
/* One last check for pending IRQs to avoid extra latency due
* to sleeping unnecessarily. */
if (omap_irq_pending())
@@ -155,13 +148,6 @@
console_unlock();
no_sleep:
- if (omap2_pm_debug) {
- unsigned long long tmp;
-
- getnstimeofday(&ts_postidle);
- ts_idle = timespec_sub(ts_postidle, ts_preidle);
- tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
- }
omap2_gpio_resume_after_idle();
clk_enable(osc_ck);
@@ -219,7 +205,6 @@
static void omap2_enter_mpu_retention(void)
{
int only_idle = 0;
- struct timespec ts_preidle, ts_postidle, ts_idle;
/* Putting MPU into the WFI state while a transfer is active
* seems to cause the I2C block to timeout. Why? Good question. */
@@ -246,19 +231,7 @@
only_idle = 1;
}
- if (omap2_pm_debug) {
- getnstimeofday(&ts_preidle);
- }
-
omap2_sram_idle();
-
- if (omap2_pm_debug) {
- unsigned long long tmp;
-
- getnstimeofday(&ts_postidle);
- ts_idle = timespec_sub(ts_postidle, ts_preidle);
- tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
- }
}
static int omap2_can_sleep(void)
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 7255d9b..c8cbd00 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -55,7 +55,7 @@
static suspend_state_t suspend_state = PM_SUSPEND_ON;
static inline bool is_suspending(void)
{
- return (suspend_state != PM_SUSPEND_ON);
+ return (suspend_state != PM_SUSPEND_ON) && console_suspend_enabled;
}
#else
static inline bool is_suspending(void)
diff --git a/arch/arm/mach-omap2/powerdomain-common.c b/arch/arm/mach-omap2/powerdomain-common.c
index 171fccd..f97afff 100644
--- a/arch/arm/mach-omap2/powerdomain-common.c
+++ b/arch/arm/mach-omap2/powerdomain-common.c
@@ -1,9 +1,8 @@
/*
- * linux/arch/arm/mach-omap2/powerdomain-common.c
- * Contains common powerdomain framework functions
+ * Common powerdomain framework functions
*
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2010-2011 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
*
* Derived from mach-omap2/powerdomain.c written by Paul Walmsley
*
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index ef71fdd..5164d58 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -1,7 +1,7 @@
/*
* OMAP powerdomain control
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
* Copyright (C) 2007-2011 Nokia Corporation
*
* Written by Paul Walmsley
@@ -77,13 +77,11 @@
static int _pwrdm_register(struct powerdomain *pwrdm)
{
int i;
+ struct voltagedomain *voltdm;
if (!pwrdm || !pwrdm->name)
return -EINVAL;
- if (!omap_chip_is(pwrdm->omap_chip))
- return -EINVAL;
-
if (cpu_is_omap44xx() &&
pwrdm->prcm_partition == OMAP4430_INVALID_PRCM_PARTITION) {
pr_err("powerdomain: %s: missing OMAP4 PRCM partition ID\n",
@@ -94,6 +92,16 @@
if (_pwrdm_lookup(pwrdm->name))
return -EEXIST;
+ voltdm = voltdm_lookup(pwrdm->voltdm.name);
+ if (!voltdm) {
+ pr_err("powerdomain: %s: voltagedomain %s does not exist\n",
+ pwrdm->name, pwrdm->voltdm.name);
+ return -EINVAL;
+ }
+ pwrdm->voltdm.ptr = voltdm;
+ INIT_LIST_HEAD(&pwrdm->voltdm_node);
+ voltdm_add_pwrdm(voltdm, pwrdm);
+
list_add(&pwrdm->node, &pwrdm_list);
/* Initialize the powerdomain's state counter */
@@ -194,36 +202,76 @@
/* Public functions */
/**
- * pwrdm_init - set up the powerdomain layer
- * @pwrdms: array of struct powerdomain pointers to register
- * @custom_funcs: func pointers for arch specific implementations
+ * pwrdm_register_platform_funcs - register powerdomain implementation fns
+ * @po: func pointers for arch specific implementations
*
- * Loop through the array of powerdomains @pwrdms, registering all
- * that are available on the current CPU. Also, program all
- * powerdomain target state as ON; this is to prevent domains from
- * hitting low power states (if bootloader has target states set to
- * something other than ON) and potentially even losing context while
- * PM is not fully initialized. The PM late init code can then program
- * the desired target state for all the power domains. No return
- * value.
+ * Register the list of function pointers used to implement the
+ * powerdomain functions on different OMAP SoCs. Should be called
+ * before any other pwrdm_register*() function. Returns -EINVAL if
+ * @po is null, -EEXIST if platform functions have already been
+ * registered, or 0 upon success.
*/
-void pwrdm_init(struct powerdomain **pwrdms, struct pwrdm_ops *custom_funcs)
+int pwrdm_register_platform_funcs(struct pwrdm_ops *po)
+{
+ if (!po)
+ return -EINVAL;
+
+ if (arch_pwrdm)
+ return -EEXIST;
+
+ arch_pwrdm = po;
+
+ return 0;
+}
+
+/**
+ * pwrdm_register_pwrdms - register SoC powerdomains
+ * @ps: pointer to an array of struct powerdomain to register
+ *
+ * Register the powerdomains available on a particular OMAP SoC. Must
+ * be called after pwrdm_register_platform_funcs(). May be called
+ * multiple times. Returns -EACCES if called before
+ * pwrdm_register_platform_funcs(); -EINVAL if the argument @ps is
+ * null; or 0 upon success.
+ */
+int pwrdm_register_pwrdms(struct powerdomain **ps)
{
struct powerdomain **p = NULL;
+
+ if (!arch_pwrdm)
+ return -EEXIST;
+
+ if (!ps)
+ return -EINVAL;
+
+ for (p = ps; *p; p++)
+ _pwrdm_register(*p);
+
+ return 0;
+}
+
+/**
+ * pwrdm_complete_init - set up the powerdomain layer
+ *
+ * Do whatever is necessary to initialize registered powerdomains and
+ * powerdomain code. Currently, this programs the next power state
+ * for each powerdomain to ON. This prevents powerdomains from
+ * unexpectedly losing context or entering high wakeup latency modes
+ * with non-power-management-enabled kernels. Must be called after
+ * pwrdm_register_pwrdms(). Returns -EACCES if called before
+ * pwrdm_register_pwrdms(), or 0 upon success.
+ */
+int pwrdm_complete_init(void)
+{
struct powerdomain *temp_p;
- if (!custom_funcs)
- WARN(1, "powerdomain: No custom pwrdm functions registered\n");
- else
- arch_pwrdm = custom_funcs;
-
- if (pwrdms) {
- for (p = pwrdms; *p; p++)
- _pwrdm_register(*p);
- }
+ if (list_empty(&pwrdm_list))
+ return -EACCES;
list_for_each_entry(temp_p, &pwrdm_list, node)
pwrdm_set_next_pwrst(temp_p, PWRDM_POWER_ON);
+
+ return 0;
}
/**
@@ -390,6 +438,18 @@
}
/**
+ * pwrdm_get_voltdm - return a ptr to the voltdm that this pwrdm resides in
+ * @pwrdm: struct powerdomain *
+ *
+ * Return a pointer to the struct voltageomain that the specified powerdomain
+ * @pwrdm exists in.
+ */
+struct voltagedomain *pwrdm_get_voltdm(struct powerdomain *pwrdm)
+{
+ return pwrdm->voltdm.ptr;
+}
+
+/**
* pwrdm_get_mem_bank_count - get number of memory banks in this powerdomain
* @pwrdm: struct powerdomain *
*
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index d23d979..42e6dd8 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -24,6 +24,8 @@
#include <plat/cpu.h>
+#include "voltage.h"
+
/* Powerdomain basic power states */
#define PWRDM_POWER_OFF 0x0
#define PWRDM_POWER_RET 0x1
@@ -78,7 +80,7 @@
/**
* struct powerdomain - OMAP powerdomain
* @name: Powerdomain name
- * @omap_chip: represents the OMAP chip types containing this pwrdm
+ * @voltdm: voltagedomain containing this powerdomain
* @prcm_offs: the address offset from CM_BASE/PRM_BASE
* @prcm_partition: (OMAP4 only) the PRCM partition ID containing @prcm_offs
* @pwrsts: Possible powerdomain power states
@@ -89,6 +91,7 @@
* @pwrsts_mem_on: Possible memory bank pwrstates when pwrdm in ON
* @pwrdm_clkdms: Clockdomains in this powerdomain
* @node: list_head linking all powerdomains
+ * @voltdm_node: list_head linking all powerdomains in a voltagedomain
* @state:
* @state_counter:
* @timer:
@@ -98,7 +101,10 @@
*/
struct powerdomain {
const char *name;
- const struct omap_chip_id omap_chip;
+ union {
+ const char *name;
+ struct voltagedomain *ptr;
+ } voltdm;
const s16 prcm_offs;
const u8 pwrsts;
const u8 pwrsts_logic_ret;
@@ -109,6 +115,7 @@
const u8 prcm_partition;
struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS];
struct list_head node;
+ struct list_head voltdm_node;
int state;
unsigned state_counter[PWRDM_MAX_PWRSTS];
unsigned ret_logic_off_counter;
@@ -162,7 +169,9 @@
int (*pwrdm_wait_transition)(struct powerdomain *pwrdm);
};
-void pwrdm_init(struct powerdomain **pwrdm_list, struct pwrdm_ops *custom_funcs);
+int pwrdm_register_platform_funcs(struct pwrdm_ops *custom_funcs);
+int pwrdm_register_pwrdms(struct powerdomain **pwrdm_list);
+int pwrdm_complete_init(void);
struct powerdomain *pwrdm_lookup(const char *name);
@@ -176,6 +185,7 @@
int pwrdm_for_each_clkdm(struct powerdomain *pwrdm,
int (*fn)(struct powerdomain *pwrdm,
struct clockdomain *clkdm));
+struct voltagedomain *pwrdm_get_voltdm(struct powerdomain *pwrdm);
int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm);
@@ -210,7 +220,8 @@
u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm);
-extern void omap2xxx_powerdomains_init(void);
+extern void omap242x_powerdomains_init(void);
+extern void omap243x_powerdomains_init(void);
extern void omap3xxx_powerdomains_init(void);
extern void omap44xx_powerdomains_init(void);
diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
index cf600e2..6a17e4c 100644
--- a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
@@ -1,7 +1,7 @@
/*
* OMAP2 and OMAP3 powerdomain control
*
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2011 Texas Instruments, Inc.
* Copyright (C) 2007-2009 Nokia Corporation
*
* Derived from mach-omap2/powerdomain.c written by Paul Walmsley
diff --git a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c
index 4210c33..d3a5399 100644
--- a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c
@@ -1,7 +1,7 @@
/*
* OMAP2/3 common powerdomain definitions
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
* Copyright (C) 2007-2011 Nokia Corporation
*
* Paul Walmsley, Jouni Högander
@@ -12,20 +12,6 @@
*/
/*
- * To Do List
- * -> Move the Sleep/Wakeup dependencies from Power Domain framework to
- * Clock Domain Framework
- */
-
-/*
- * This file contains all of the powerdomains that have some element
- * of software control for the OMAP24xx and OMAP34xx chips.
- *
- * This is not an exhaustive listing of powerdomains on the chips; only
- * powerdomains that can be controlled in software.
- */
-
-/*
* The names for the DSP/IVA2 powerdomains are confusing.
*
* Most OMAP chips have an on-board DSP.
@@ -59,8 +45,6 @@
struct powerdomain gfx_omap2_pwrdm = {
.name = "gfx_pwrdm",
.prcm_offs = GFX_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
- CHIP_IS_OMAP3430ES1),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
@@ -70,11 +54,12 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
struct powerdomain wkup_omap2_pwrdm = {
.name = "wkup_pwrdm",
.prcm_offs = WKUP_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_ON,
+ .voltdm = { .name = "wakeup" },
};
diff --git a/arch/arm/mach-omap2/powerdomains2xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_data.c
index cc389fb..2385c1f 100644
--- a/arch/arm/mach-omap2/powerdomains2xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains2xxx_data.c
@@ -1,7 +1,7 @@
/*
* OMAP2XXX powerdomain definitions
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
* Copyright (C) 2007-2011 Nokia Corporation
*
* Paul Walmsley, Jouni Högander
@@ -28,7 +28,6 @@
static struct powerdomain dsp_pwrdm = {
.name = "dsp_pwrdm",
.prcm_offs = OMAP24XX_DSP_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
@@ -38,12 +37,12 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON,
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain mpu_24xx_pwrdm = {
.name = "mpu_pwrdm",
.prcm_offs = MPU_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -53,12 +52,12 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON,
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain core_24xx_pwrdm = {
.name = "core_pwrdm",
.prcm_offs = CORE_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
.pwrsts = PWRSTS_OFF_RET_ON,
.banks = 3,
.pwrsts_mem_ret = {
@@ -71,6 +70,7 @@
[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
[2] = PWRSTS_OFF_RET_ON, /* MEM3ONSTATE */
},
+ .voltdm = { .name = "core" },
};
@@ -78,14 +78,11 @@
* 2430-specific powerdomains
*/
-#ifdef CONFIG_SOC_OMAP2430
-
/* XXX 2430 KILLDOMAINWKUP bit? No current users apparently */
static struct powerdomain mdm_pwrdm = {
.name = "mdm_pwrdm",
.prcm_offs = OMAP2430_MDM_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
@@ -95,29 +92,44 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
-#endif /* CONFIG_SOC_OMAP2430 */
+/*
+ *
+ */
-/* As powerdomains are added or removed above, this list must also be changed */
-static struct powerdomain *powerdomains_omap2xxx[] __initdata = {
-
+static struct powerdomain *powerdomains_omap24xx[] __initdata = {
&wkup_omap2_pwrdm,
&gfx_omap2_pwrdm,
-
-#ifdef CONFIG_ARCH_OMAP2
&dsp_pwrdm,
&mpu_24xx_pwrdm,
&core_24xx_pwrdm,
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
- &mdm_pwrdm,
-#endif
NULL
};
-void __init omap2xxx_powerdomains_init(void)
+static struct powerdomain *powerdomains_omap2430[] __initdata = {
+ &mdm_pwrdm,
+ NULL
+};
+
+void __init omap242x_powerdomains_init(void)
{
- pwrdm_init(powerdomains_omap2xxx, &omap2_pwrdm_operations);
+ if (!cpu_is_omap2420())
+ return;
+
+ pwrdm_register_platform_funcs(&omap2_pwrdm_operations);
+ pwrdm_register_pwrdms(powerdomains_omap24xx);
+ pwrdm_complete_init();
+}
+
+void __init omap243x_powerdomains_init(void)
+{
+ if (!cpu_is_omap2430())
+ return;
+
+ pwrdm_register_platform_funcs(&omap2_pwrdm_operations);
+ pwrdm_register_pwrdms(powerdomains_omap24xx);
+ pwrdm_register_pwrdms(powerdomains_omap2430);
+ pwrdm_complete_init();
}
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index 469a920..8ef26da 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -1,7 +1,7 @@
/*
* OMAP3 powerdomain definitions
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
* Copyright (C) 2007-2011 Nokia Corporation
*
* Paul Walmsley, Jouni Högander
@@ -14,6 +14,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <plat/cpu.h>
+
#include "powerdomain.h"
#include "powerdomains2xxx_3xxx_data.h"
@@ -27,8 +29,6 @@
* 34XX-specific powerdomains, dependencies
*/
-#ifdef CONFIG_ARCH_OMAP3
-
/*
* Powerdomains
*/
@@ -36,7 +36,6 @@
static struct powerdomain iva2_pwrdm = {
.name = "iva2_pwrdm",
.prcm_offs = OMAP3430_IVA2_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 4,
@@ -52,12 +51,12 @@
[2] = PWRSTS_OFF_ON,
[3] = PWRSTS_ON,
},
+ .voltdm = { .name = "mpu_iva" },
};
static struct powerdomain mpu_3xxx_pwrdm = {
.name = "mpu_pwrdm",
.prcm_offs = MPU_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.flags = PWRDM_HAS_MPU_QUIRK,
@@ -68,6 +67,7 @@
.pwrsts_mem_on = {
[0] = PWRSTS_OFF_ON,
},
+ .voltdm = { .name = "mpu_iva" },
};
/*
@@ -83,10 +83,6 @@
static struct powerdomain core_3xxx_pre_es3_1_pwrdm = {
.name = "core_pwrdm",
.prcm_offs = CORE_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
- CHIP_IS_OMAP3430ES2 |
- CHIP_IS_OMAP3430ES3_0 |
- CHIP_IS_OMAP3630ES1),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 2,
@@ -98,13 +94,12 @@
[0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain core_3xxx_es3_1_pwrdm = {
.name = "core_pwrdm",
.prcm_offs = CORE_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES3_1 |
- CHIP_GE_OMAP3630ES1_1),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
/*
@@ -121,11 +116,11 @@
[0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain dss_pwrdm = {
.name = "dss_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.prcm_offs = OMAP3430_DSS_MOD,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
@@ -136,6 +131,7 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
/*
@@ -146,7 +142,6 @@
static struct powerdomain sgx_pwrdm = {
.name = "sgx_pwrdm",
.prcm_offs = OMAP3430ES2_SGX_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
/* XXX This is accurate for 3430 SGX, but what about GFX? */
.pwrsts = PWRSTS_OFF_ON,
.pwrsts_logic_ret = PWRSTS_RET,
@@ -157,11 +152,11 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain cam_pwrdm = {
.name = "cam_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.prcm_offs = OMAP3430_CAM_MOD,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
@@ -172,12 +167,12 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain per_pwrdm = {
.name = "per_pwrdm",
.prcm_offs = OMAP3430_PER_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -187,26 +182,26 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain emu_pwrdm = {
.name = "emu_pwrdm",
.prcm_offs = OMAP3430_EMU_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .voltdm = { .name = "core" },
};
static struct powerdomain neon_pwrdm = {
.name = "neon_pwrdm",
.prcm_offs = OMAP3430_NEON_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
+ .voltdm = { .name = "mpu_iva" },
};
static struct powerdomain usbhost_pwrdm = {
.name = "usbhost_pwrdm",
.prcm_offs = OMAP3430ES2_USBHOST_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
/*
@@ -223,65 +218,103 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain dpll1_pwrdm = {
.name = "dpll1_pwrdm",
.prcm_offs = MPU_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .voltdm = { .name = "mpu_iva" },
};
static struct powerdomain dpll2_pwrdm = {
.name = "dpll2_pwrdm",
.prcm_offs = OMAP3430_IVA2_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .voltdm = { .name = "mpu_iva" },
};
static struct powerdomain dpll3_pwrdm = {
.name = "dpll3_pwrdm",
.prcm_offs = PLL_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .voltdm = { .name = "core" },
};
static struct powerdomain dpll4_pwrdm = {
.name = "dpll4_pwrdm",
.prcm_offs = PLL_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .voltdm = { .name = "core" },
};
static struct powerdomain dpll5_pwrdm = {
.name = "dpll5_pwrdm",
.prcm_offs = PLL_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
+ .voltdm = { .name = "core" },
};
/* As powerdomains are added or removed above, this list must also be changed */
-static struct powerdomain *powerdomains_omap3xxx[] __initdata = {
-
+static struct powerdomain *powerdomains_omap3430_common[] __initdata = {
&wkup_omap2_pwrdm,
- &gfx_omap2_pwrdm,
&iva2_pwrdm,
&mpu_3xxx_pwrdm,
&neon_pwrdm,
- &core_3xxx_pre_es3_1_pwrdm,
- &core_3xxx_es3_1_pwrdm,
&cam_pwrdm,
&dss_pwrdm,
&per_pwrdm,
&emu_pwrdm,
- &sgx_pwrdm,
- &usbhost_pwrdm,
&dpll1_pwrdm,
&dpll2_pwrdm,
&dpll3_pwrdm,
&dpll4_pwrdm,
- &dpll5_pwrdm,
-#endif
NULL
};
+static struct powerdomain *powerdomains_omap3430es1[] __initdata = {
+ &gfx_omap2_pwrdm,
+ &core_3xxx_pre_es3_1_pwrdm,
+ NULL
+};
+
+/* also includes 3630ES1.0 */
+static struct powerdomain *powerdomains_omap3430es2_es3_0[] __initdata = {
+ &core_3xxx_pre_es3_1_pwrdm,
+ &sgx_pwrdm,
+ &usbhost_pwrdm,
+ &dpll5_pwrdm,
+ NULL
+};
+
+/* also includes 3630ES1.1+ */
+static struct powerdomain *powerdomains_omap3430es3_1plus[] __initdata = {
+ &core_3xxx_es3_1_pwrdm,
+ &sgx_pwrdm,
+ &usbhost_pwrdm,
+ &dpll5_pwrdm,
+ NULL
+};
void __init omap3xxx_powerdomains_init(void)
{
- pwrdm_init(powerdomains_omap3xxx, &omap3_pwrdm_operations);
+ unsigned int rev;
+
+ if (!cpu_is_omap34xx())
+ return;
+
+ pwrdm_register_platform_funcs(&omap3_pwrdm_operations);
+ pwrdm_register_pwrdms(powerdomains_omap3430_common);
+
+ rev = omap_rev();
+
+ if (rev == OMAP3430_REV_ES1_0)
+ pwrdm_register_pwrdms(powerdomains_omap3430es1);
+ else if (rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1 ||
+ rev == OMAP3430_REV_ES3_0 || rev == OMAP3630_REV_ES1_0)
+ pwrdm_register_pwrdms(powerdomains_omap3430es2_es3_0);
+ else if (rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2 ||
+ rev == OMAP3517_REV_ES1_0 || rev == OMAP3517_REV_ES1_1 ||
+ rev == OMAP3630_REV_ES1_1 || rev == OMAP3630_REV_ES1_2)
+ pwrdm_register_pwrdms(powerdomains_omap3430es3_1plus);
+ else
+ WARN(1, "OMAP3 powerdomain init: unknown chip type\n");
+
+ pwrdm_complete_init();
}
diff --git a/arch/arm/mach-omap2/powerdomains44xx_data.c b/arch/arm/mach-omap2/powerdomains44xx_data.c
index 247e794..704664c 100644
--- a/arch/arm/mach-omap2/powerdomains44xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains44xx_data.c
@@ -33,9 +33,9 @@
/* core_44xx_pwrdm: CORE power domain */
static struct powerdomain core_44xx_pwrdm = {
.name = "core_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_CORE_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 5,
@@ -59,9 +59,9 @@
/* gfx_44xx_pwrdm: 3D accelerator power domain */
static struct powerdomain gfx_44xx_pwrdm = {
.name = "gfx_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_GFX_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
.pwrsts_mem_ret = {
@@ -76,9 +76,9 @@
/* abe_44xx_pwrdm: Audio back end power domain */
static struct powerdomain abe_44xx_pwrdm = {
.name = "abe_pwrdm",
+ .voltdm = { .name = "iva" },
.prcm_offs = OMAP4430_PRM_ABE_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF,
.banks = 2,
@@ -96,9 +96,9 @@
/* dss_44xx_pwrdm: Display subsystem power domain */
static struct powerdomain dss_44xx_pwrdm = {
.name = "dss_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_DSS_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF,
.banks = 1,
@@ -114,9 +114,9 @@
/* tesla_44xx_pwrdm: Tesla processor power domain */
static struct powerdomain tesla_44xx_pwrdm = {
.name = "tesla_pwrdm",
+ .voltdm = { .name = "iva" },
.prcm_offs = OMAP4430_PRM_TESLA_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 3,
@@ -136,9 +136,9 @@
/* wkup_44xx_pwrdm: Wake-up power domain */
static struct powerdomain wkup_44xx_pwrdm = {
.name = "wkup_pwrdm",
+ .voltdm = { .name = "wakeup" },
.prcm_offs = OMAP4430_PRM_WKUP_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_ON,
.banks = 1,
.pwrsts_mem_ret = {
@@ -152,9 +152,9 @@
/* cpu0_44xx_pwrdm: MPU0 processor and Neon coprocessor power domain */
static struct powerdomain cpu0_44xx_pwrdm = {
.name = "cpu0_pwrdm",
+ .voltdm = { .name = "mpu" },
.prcm_offs = OMAP4430_PRCM_MPU_CPU0_INST,
.prcm_partition = OMAP4430_PRCM_MPU_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -169,9 +169,9 @@
/* cpu1_44xx_pwrdm: MPU1 processor and Neon coprocessor power domain */
static struct powerdomain cpu1_44xx_pwrdm = {
.name = "cpu1_pwrdm",
+ .voltdm = { .name = "mpu" },
.prcm_offs = OMAP4430_PRCM_MPU_CPU1_INST,
.prcm_partition = OMAP4430_PRCM_MPU_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -186,9 +186,9 @@
/* emu_44xx_pwrdm: Emulation power domain */
static struct powerdomain emu_44xx_pwrdm = {
.name = "emu_pwrdm",
+ .voltdm = { .name = "wakeup" },
.prcm_offs = OMAP4430_PRM_EMU_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
.pwrsts_mem_ret = {
@@ -202,9 +202,9 @@
/* mpu_44xx_pwrdm: Modena processor and the Neon coprocessor power domain */
static struct powerdomain mpu_44xx_pwrdm = {
.name = "mpu_pwrdm",
+ .voltdm = { .name = "mpu" },
.prcm_offs = OMAP4430_PRM_MPU_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 3,
@@ -223,9 +223,9 @@
/* ivahd_44xx_pwrdm: IVA-HD power domain */
static struct powerdomain ivahd_44xx_pwrdm = {
.name = "ivahd_pwrdm",
+ .voltdm = { .name = "iva" },
.prcm_offs = OMAP4430_PRM_IVAHD_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF,
.banks = 4,
@@ -247,9 +247,9 @@
/* cam_44xx_pwrdm: Camera subsystem power domain */
static struct powerdomain cam_44xx_pwrdm = {
.name = "cam_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_CAM_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
.pwrsts_mem_ret = {
@@ -264,9 +264,9 @@
/* l3init_44xx_pwrdm: L3 initators pheripherals power domain */
static struct powerdomain l3init_44xx_pwrdm = {
.name = "l3init_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_L3INIT_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -282,9 +282,9 @@
/* l4per_44xx_pwrdm: Target peripherals power domain */
static struct powerdomain l4per_44xx_pwrdm = {
.name = "l4per_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_L4PER_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 2,
@@ -305,18 +305,18 @@
*/
static struct powerdomain always_on_core_44xx_pwrdm = {
.name = "always_on_core_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_ALWAYS_ON_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_ON,
};
/* cefuse_44xx_pwrdm: Customer efuse controller power domain */
static struct powerdomain cefuse_44xx_pwrdm = {
.name = "cefuse_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_CEFUSE_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_ON,
.flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
};
@@ -352,5 +352,7 @@
void __init omap44xx_powerdomains_init(void)
{
- pwrdm_init(powerdomains_omap44xx, &omap4_pwrdm_operations);
+ pwrdm_register_platform_funcs(&omap4_pwrdm_operations);
+ pwrdm_register_pwrdms(powerdomains_omap44xx);
+ pwrdm_complete_init();
}
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index 051213f..f02d87f 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -20,6 +20,8 @@
#include <plat/cpu.h>
#include <plat/prcm.h>
+#include "vp.h"
+
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
@@ -156,3 +158,57 @@
return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
}
+
+/* PRM VP */
+
+/*
+ * struct omap3_vp - OMAP3 VP register access description.
+ * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
+ */
+struct omap3_vp {
+ u32 tranxdone_status;
+};
+
+static struct omap3_vp omap3_vp[] = {
+ [OMAP3_VP_VDD_MPU_ID] = {
+ .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK,
+ },
+ [OMAP3_VP_VDD_CORE_ID] = {
+ .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK,
+ },
+};
+
+#define MAX_VP_ID ARRAY_SIZE(omap3_vp);
+
+u32 omap3_prm_vp_check_txdone(u8 vp_id)
+{
+ struct omap3_vp *vp = &omap3_vp[vp_id];
+ u32 irqstatus;
+
+ irqstatus = omap2_prm_read_mod_reg(OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ return irqstatus & vp->tranxdone_status;
+}
+
+void omap3_prm_vp_clear_txdone(u8 vp_id)
+{
+ struct omap3_vp *vp = &omap3_vp[vp_id];
+
+ omap2_prm_write_mod_reg(vp->tranxdone_status,
+ OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+}
+
+u32 omap3_prm_vcvp_read(u8 offset)
+{
+ return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset);
+}
+
+void omap3_prm_vcvp_write(u32 val, u8 offset)
+{
+ omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset);
+}
+
+u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
+{
+ return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset);
+}
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h
index a1fc62a..cef533d 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h
@@ -303,7 +303,19 @@
extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift);
+/* OMAP3-specific VP functions */
+u32 omap3_prm_vp_check_txdone(u8 vp_id);
+void omap3_prm_vp_clear_txdone(u8 vp_id);
+
+/*
+ * OMAP3 access functions for voltage controller (VC) and
+ * voltage proccessor (VP) in the PRM.
+ */
+extern u32 omap3_prm_vcvp_read(u8 offset);
+extern void omap3_prm_vcvp_write(u32 val, u8 offset);
+extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
#endif /* CONFIG_ARCH_OMAP4 */
+
#endif
/*
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 0016555..495a31a 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -21,8 +21,11 @@
#include <plat/cpu.h>
#include <plat/prcm.h>
+#include "vp.h"
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
+#include "prcm44xx.h"
+#include "prminst44xx.h"
/* PRM low-level functions */
@@ -50,3 +53,71 @@
return v;
}
+
+/* PRM VP */
+
+/*
+ * struct omap4_vp - OMAP4 VP register access description.
+ * @irqstatus_mpu: offset to IRQSTATUS_MPU register for VP
+ * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
+ */
+struct omap4_vp {
+ u32 irqstatus_mpu;
+ u32 tranxdone_status;
+};
+
+static struct omap4_vp omap4_vp[] = {
+ [OMAP4_VP_VDD_MPU_ID] = {
+ .irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET,
+ .tranxdone_status = OMAP4430_VP_MPU_TRANXDONE_ST_MASK,
+ },
+ [OMAP4_VP_VDD_IVA_ID] = {
+ .irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
+ .tranxdone_status = OMAP4430_VP_IVA_TRANXDONE_ST_MASK,
+ },
+ [OMAP4_VP_VDD_CORE_ID] = {
+ .irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
+ .tranxdone_status = OMAP4430_VP_CORE_TRANXDONE_ST_MASK,
+ },
+};
+
+u32 omap4_prm_vp_check_txdone(u8 vp_id)
+{
+ struct omap4_vp *vp = &omap4_vp[vp_id];
+ u32 irqstatus;
+
+ irqstatus = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_OCP_SOCKET_INST,
+ vp->irqstatus_mpu);
+ return irqstatus & vp->tranxdone_status;
+}
+
+void omap4_prm_vp_clear_txdone(u8 vp_id)
+{
+ struct omap4_vp *vp = &omap4_vp[vp_id];
+
+ omap4_prminst_write_inst_reg(vp->tranxdone_status,
+ OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_OCP_SOCKET_INST,
+ vp->irqstatus_mpu);
+};
+
+u32 omap4_prm_vcvp_read(u8 offset)
+{
+ return omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_DEVICE_INST, offset);
+}
+
+void omap4_prm_vcvp_write(u32 val, u8 offset)
+{
+ omap4_prminst_write_inst_reg(val, OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_DEVICE_INST, offset);
+}
+
+u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
+{
+ return omap4_prminst_rmw_inst_reg_bits(mask, bits,
+ OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_DEVICE_INST,
+ offset);
+}
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
index 7dfa379..3d66ccd 100644
--- a/arch/arm/mach-omap2/prm44xx.h
+++ b/arch/arm/mach-omap2/prm44xx.h
@@ -751,6 +751,18 @@
extern void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 idx);
extern u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
+/* OMAP4-specific VP functions */
+u32 omap4_prm_vp_check_txdone(u8 vp_id);
+void omap4_prm_vp_clear_txdone(u8 vp_id);
+
+/*
+ * OMAP4 access functions for voltage controller (VC) and
+ * voltage proccessor (VP) in the PRM.
+ */
+extern u32 omap4_prm_vcvp_read(u8 offset);
+extern void omap4_prm_vcvp_write(u32 val, u8 offset);
+extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
+
# endif
#endif
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 466fc722..9992dbf 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -107,28 +107,6 @@
static LIST_HEAD(uart_list);
static u8 num_uarts;
-static int uart_idle_hwmod(struct omap_device *od)
-{
- omap_hwmod_idle(od->hwmods[0]);
-
- return 0;
-}
-
-static int uart_enable_hwmod(struct omap_device *od)
-{
- omap_hwmod_enable(od->hwmods[0]);
-
- return 0;
-}
-
-static struct omap_device_pm_latency omap_uart_latency[] = {
- {
- .deactivate_func = uart_idle_hwmod,
- .activate_func = uart_enable_hwmod,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static inline unsigned int __serial_read_reg(struct uart_port *up,
int offset)
{
@@ -711,7 +689,7 @@
{
struct omap_uart_state *uart;
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
void *pdata = NULL;
u32 pdata_size = 0;
char *name;
@@ -799,20 +777,19 @@
if (WARN_ON(!oh))
return;
- od = omap_device_build(name, uart->num, oh, pdata, pdata_size,
- omap_uart_latency,
- ARRAY_SIZE(omap_uart_latency), false);
- WARN(IS_ERR(od), "Could not build omap_device for %s: %s.\n",
+ pdev = omap_device_build(name, uart->num, oh, pdata, pdata_size,
+ NULL, 0, false);
+ WARN(IS_ERR(pdev), "Could not build omap_device for %s: %s.\n",
name, oh->name);
- omap_device_disable_idle_on_suspend(od);
+ omap_device_disable_idle_on_suspend(pdev);
oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
uart->irq = oh->mpu_irqs[0].irq;
uart->regshift = 2;
uart->mapbase = oh->slaves[0]->addr->pa_start;
uart->membase = omap_hwmod_get_mpu_rt_va(oh);
- uart->pdev = &od->pdev;
+ uart->pdev = pdev;
oh->dev_attr = uart;
@@ -846,8 +823,8 @@
if ((cpu_is_omap34xx() && uart->padconf) ||
(uart->wk_en && uart->wk_mask)) {
- device_init_wakeup(&od->pdev.dev, true);
- DEV_CREATE_FILE(&od->pdev.dev, &dev_attr_sleep_timeout);
+ device_init_wakeup(&pdev->dev, true);
+ DEV_CREATE_FILE(&pdev->dev, &dev_attr_sleep_timeout);
}
/* Enable the MDR1 errata for OMAP3 */
diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c
index f438cf4..53d9d0a 100644
--- a/arch/arm/mach-omap2/smartreflex-class3.c
+++ b/arch/arm/mach-omap2/smartreflex-class3.c
@@ -15,7 +15,7 @@
static int sr_class3_enable(struct voltagedomain *voltdm)
{
- unsigned long volt = omap_voltage_get_nom_volt(voltdm);
+ unsigned long volt = voltdm_get_voltage(voltdm);
if (!volt) {
pr_warning("%s: Curr voltage unknown. Cannot enable sr_%s\n",
@@ -32,7 +32,7 @@
omap_vp_disable(voltdm);
sr_disable(voltdm);
if (is_volt_reset)
- omap_voltage_reset(voltdm);
+ voltdm_reset(voltdm);
return 0;
}
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 34c01a7..bb606c9 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -62,6 +62,7 @@
static struct omap_sr_class_data *sr_class;
static struct omap_sr_pmic_data *sr_pmic_data;
+static struct dentry *sr_dbg_dir;
static inline void sr_write_reg(struct omap_sr *sr, unsigned offset, u32 value)
{
@@ -826,9 +827,10 @@
struct omap_sr *sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL);
struct omap_sr_data *pdata = pdev->dev.platform_data;
struct resource *mem, *irq;
- struct dentry *vdd_dbg_dir, *nvalue_dir;
+ struct dentry *nvalue_dir;
struct omap_volt_data *volt_data;
int i, ret = 0;
+ char *name;
if (!sr_info) {
dev_err(&pdev->dev, "%s: unable to allocate sr_info\n",
@@ -899,18 +901,25 @@
}
dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__);
-
- /*
- * If the voltage domain debugfs directory is not created, do
- * not try to create rest of the debugfs entries.
- */
- vdd_dbg_dir = omap_voltage_get_dbgdir(sr_info->voltdm);
- if (!vdd_dbg_dir) {
- ret = -EINVAL;
- goto err_iounmap;
+ if (!sr_dbg_dir) {
+ sr_dbg_dir = debugfs_create_dir("smartreflex", NULL);
+ if (!sr_dbg_dir) {
+ ret = PTR_ERR(sr_dbg_dir);
+ pr_err("%s:sr debugfs dir creation failed(%d)\n",
+ __func__, ret);
+ goto err_iounmap;
+ }
}
- sr_info->dbg_dir = debugfs_create_dir("smartreflex", vdd_dbg_dir);
+ name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name);
+ if (!name) {
+ dev_err(&pdev->dev, "%s: Unable to alloc debugfs name\n",
+ __func__);
+ ret = -ENOMEM;
+ goto err_iounmap;
+ }
+ sr_info->dbg_dir = debugfs_create_dir(name, sr_dbg_dir);
+ kfree(name);
if (IS_ERR(sr_info->dbg_dir)) {
dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
__func__);
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index 10d3c5e..9f43fcc 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -31,14 +31,6 @@
static bool sr_enable_on_init;
-static struct omap_device_pm_latency omap_sr_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST
- },
-};
-
/* Read EFUSE values from control registers for OMAP3430 */
static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
struct omap_sr_data *sr_data)
@@ -80,7 +72,7 @@
static int sr_dev_init(struct omap_hwmod *oh, void *user)
{
struct omap_sr_data *sr_data;
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_volt_data *volt_data;
char *name = "smartreflex";
static int i;
@@ -102,7 +94,7 @@
sr_data->senn_mod = 0x1;
sr_data->senp_mod = 0x1;
- sr_data->voltdm = omap_voltage_domain_lookup(oh->vdd_name);
+ sr_data->voltdm = voltdm_lookup(oh->vdd_name);
if (IS_ERR(sr_data->voltdm)) {
pr_err("%s: Unable to get voltage domain pointer for VDD %s\n",
__func__, oh->vdd_name);
@@ -120,10 +112,9 @@
sr_data->enable_on_init = sr_enable_on_init;
- od = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data),
- omap_sr_latency,
- ARRAY_SIZE(omap_sr_latency), 0);
- if (IS_ERR(od))
+ pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data),
+ NULL, 0, 0);
+ if (IS_ERR(pdev))
pr_warning("%s: Could not build omap_device for %s: %s.\n\n",
__func__, name, oh->name);
exit:
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index cf1de7d..e49fc7b 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -35,6 +35,7 @@
#include <linux/irq.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
+#include <linux/slab.h>
#include <asm/mach/time.h>
#include <plat/dmtimer.h>
@@ -42,6 +43,10 @@
#include <asm/sched_clock.h>
#include <plat/common.h>
#include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
+#include <plat/omap-pm.h>
+
+#include "powerdomain.h"
/* Parent clocks, eventually these will come from the clock framework */
@@ -67,7 +72,7 @@
/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
#define MAX_GPTIMER_ID 12
-u32 sys_timer_reserved;
+static u32 sys_timer_reserved;
/* Clockevent code */
@@ -78,7 +83,7 @@
{
struct clock_event_device *evt = &clockevent_gpt;
- __omap_dm_timer_write_status(clkev.io_base, OMAP_TIMER_INT_OVERFLOW);
+ __omap_dm_timer_write_status(&clkev, OMAP_TIMER_INT_OVERFLOW);
evt->event_handler(evt);
return IRQ_HANDLED;
@@ -93,7 +98,7 @@
static int omap2_gp_timer_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
- __omap_dm_timer_load_start(clkev.io_base, OMAP_TIMER_CTRL_ST,
+ __omap_dm_timer_load_start(&clkev, OMAP_TIMER_CTRL_ST,
0xffffffff - cycles, 1);
return 0;
@@ -104,16 +109,16 @@
{
u32 period;
- __omap_dm_timer_stop(clkev.io_base, 1, clkev.rate);
+ __omap_dm_timer_stop(&clkev, 1, clkev.rate);
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
period = clkev.rate / HZ;
period -= 1;
/* Looks like we need to first set the load value separately */
- __omap_dm_timer_write(clkev.io_base, OMAP_TIMER_LOAD_REG,
+ __omap_dm_timer_write(&clkev, OMAP_TIMER_LOAD_REG,
0xffffffff - period, 1);
- __omap_dm_timer_load_start(clkev.io_base,
+ __omap_dm_timer_load_start(&clkev,
OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST,
0xffffffff - period, 1);
break;
@@ -189,7 +194,8 @@
clk_put(src);
}
}
- __omap_dm_timer_reset(timer->io_base, 1, 1);
+ __omap_dm_timer_init_regs(timer);
+ __omap_dm_timer_reset(timer, 1, 1);
timer->posted = 1;
timer->rate = clk_get_rate(timer->fclk);
@@ -210,7 +216,7 @@
omap2_gp_timer_irq.dev_id = (void *)&clkev;
setup_irq(clkev.irq, &omap2_gp_timer_irq);
- __omap_dm_timer_int_enable(clkev.io_base, OMAP_TIMER_INT_OVERFLOW);
+ __omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
clockevent_gpt.mult = div_sc(clkev.rate, NSEC_PER_SEC,
clockevent_gpt.shift);
@@ -251,7 +257,7 @@
static DEFINE_CLOCK_DATA(cd);
static cycle_t clocksource_read_cycles(struct clocksource *cs)
{
- return (cycle_t)__omap_dm_timer_read_counter(clksrc.io_base, 1);
+ return (cycle_t)__omap_dm_timer_read_counter(&clksrc, 1);
}
static struct clocksource clocksource_gpt = {
@@ -266,7 +272,7 @@
{
u32 cyc;
- cyc = __omap_dm_timer_read_counter(clksrc.io_base, 1);
+ cyc = __omap_dm_timer_read_counter(&clksrc, 1);
update_sched_clock(&cd, cyc, (u32)~0);
}
@@ -276,7 +282,7 @@
u32 cyc = 0;
if (clksrc.reserved)
- cyc = __omap_dm_timer_read_counter(clksrc.io_base, 1);
+ cyc = __omap_dm_timer_read_counter(&clksrc, 1);
return cyc_to_sched_clock(&cd, cyc, (u32)~0);
}
@@ -293,7 +299,7 @@
pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n",
gptimer_id, clksrc.rate);
- __omap_dm_timer_load_start(clksrc.io_base,
+ __omap_dm_timer_load_start(&clksrc,
OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1);
init_sched_clock(&cd, dmtimer_update_sched_clock, 32, clksrc.rate);
@@ -341,3 +347,167 @@
}
OMAP_SYS_TIMER(4)
#endif
+
+/**
+ * omap2_dm_timer_set_src - change the timer input clock source
+ * @pdev: timer platform device pointer
+ * @source: array index of parent clock source
+ */
+static int omap2_dm_timer_set_src(struct platform_device *pdev, int source)
+{
+ int ret;
+ struct dmtimer_platform_data *pdata = pdev->dev.platform_data;
+ struct clk *fclk, *parent;
+ char *parent_name = NULL;
+
+ fclk = clk_get(&pdev->dev, "fck");
+ if (IS_ERR_OR_NULL(fclk)) {
+ dev_err(&pdev->dev, "%s: %d: clk_get() FAILED\n",
+ __func__, __LINE__);
+ return -EINVAL;
+ }
+
+ switch (source) {
+ case OMAP_TIMER_SRC_SYS_CLK:
+ parent_name = "sys_ck";
+ break;
+
+ case OMAP_TIMER_SRC_32_KHZ:
+ parent_name = "32k_ck";
+ break;
+
+ case OMAP_TIMER_SRC_EXT_CLK:
+ if (pdata->timer_ip_version == OMAP_TIMER_IP_VERSION_1) {
+ parent_name = "alt_ck";
+ break;
+ }
+ dev_err(&pdev->dev, "%s: %d: invalid clk src.\n",
+ __func__, __LINE__);
+ clk_put(fclk);
+ return -EINVAL;
+ }
+
+ parent = clk_get(&pdev->dev, parent_name);
+ if (IS_ERR_OR_NULL(parent)) {
+ dev_err(&pdev->dev, "%s: %d: clk_get() %s FAILED\n",
+ __func__, __LINE__, parent_name);
+ clk_put(fclk);
+ return -EINVAL;
+ }
+
+ ret = clk_set_parent(fclk, parent);
+ if (IS_ERR_VALUE(ret)) {
+ dev_err(&pdev->dev, "%s: clk_set_parent() to %s FAILED\n",
+ __func__, parent_name);
+ ret = -EINVAL;
+ }
+
+ clk_put(parent);
+ clk_put(fclk);
+
+ return ret;
+}
+
+struct omap_device_pm_latency omap2_dmtimer_latency[] = {
+ {
+ .deactivate_func = omap_device_idle_hwmods,
+ .activate_func = omap_device_enable_hwmods,
+ .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+ },
+};
+
+/**
+ * omap_timer_init - build and register timer device with an
+ * associated timer hwmod
+ * @oh: timer hwmod pointer to be used to build timer device
+ * @user: parameter that can be passed from calling hwmod API
+ *
+ * Called by omap_hwmod_for_each_by_class to register each of the timer
+ * devices present in the system. The number of timer devices is known
+ * by parsing through the hwmod database for a given class name. At the
+ * end of function call memory is allocated for timer device and it is
+ * registered to the framework ready to be proved by the driver.
+ */
+static int __init omap_timer_init(struct omap_hwmod *oh, void *unused)
+{
+ int id;
+ int ret = 0;
+ char *name = "omap_timer";
+ struct dmtimer_platform_data *pdata;
+ struct platform_device *pdev;
+ struct omap_timer_capability_dev_attr *timer_dev_attr;
+ struct powerdomain *pwrdm;
+
+ pr_debug("%s: %s\n", __func__, oh->name);
+
+ /* on secure device, do not register secure timer */
+ timer_dev_attr = oh->dev_attr;
+ if (omap_type() != OMAP2_DEVICE_TYPE_GP && timer_dev_attr)
+ if (timer_dev_attr->timer_capability == OMAP_TIMER_SECURE)
+ return ret;
+
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ pr_err("%s: No memory for [%s]\n", __func__, oh->name);
+ return -ENOMEM;
+ }
+
+ /*
+ * Extract the IDs from name field in hwmod database
+ * and use the same for constructing ids' for the
+ * timer devices. In a way, we are avoiding usage of
+ * static variable witin the function to do the same.
+ * CAUTION: We have to be careful and make sure the
+ * name in hwmod database does not change in which case
+ * we might either make corresponding change here or
+ * switch back static variable mechanism.
+ */
+ sscanf(oh->name, "timer%2d", &id);
+
+ pdata->set_timer_src = omap2_dm_timer_set_src;
+ pdata->timer_ip_version = oh->class->rev;
+
+ /* Mark clocksource and clockevent timers as reserved */
+ if ((sys_timer_reserved >> (id - 1)) & 0x1)
+ pdata->reserved = 1;
+
+ pwrdm = omap_hwmod_get_pwrdm(oh);
+ pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm);
+#ifdef CONFIG_PM
+ pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
+#endif
+ pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata),
+ omap2_dmtimer_latency,
+ ARRAY_SIZE(omap2_dmtimer_latency),
+ 0);
+
+ if (IS_ERR(pdev)) {
+ pr_err("%s: Can't build omap_device for %s: %s.\n",
+ __func__, name, oh->name);
+ ret = -EINVAL;
+ }
+
+ kfree(pdata);
+
+ return ret;
+}
+
+/**
+ * omap2_dm_timer_init - top level regular device initialization
+ *
+ * Uses dedicated hwmod api to parse through hwmod database for
+ * given class name and then build and register the timer device.
+ */
+static int __init omap2_dm_timer_init(void)
+{
+ int ret;
+
+ ret = omap_hwmod_for_each_by_class("timer", omap_timer_init, NULL);
+ if (unlikely(ret)) {
+ pr_err("%s: device registration failed.\n", __func__);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+arch_initcall(omap2_dm_timer_init);
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index a65145b..47fb5d6 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -60,14 +60,6 @@
static u64 musb_dmamask = DMA_BIT_MASK(32);
-static struct omap_device_pm_latency omap_musb_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static void usb_musb_mux_init(struct omap_musb_board_data *board_data)
{
switch (board_data->interface_type) {
@@ -115,7 +107,6 @@
void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
{
struct omap_hwmod *oh;
- struct omap_device *od;
struct platform_device *pdev;
struct device *dev;
int bus_id = -1;
@@ -137,9 +128,6 @@
musb_plat.mode = board_data->mode;
musb_plat.extvbus = board_data->extvbus;
- if (cpu_is_omap44xx())
- omap4430_phy_init(dev);
-
if (cpu_is_omap3517() || cpu_is_omap3505()) {
oh_name = "am35x_otg_hs";
name = "musb-am35x";
@@ -148,22 +136,19 @@
name = "musb-omap2430";
}
- oh = omap_hwmod_lookup(oh_name);
- if (!oh) {
- pr_err("Could not look up %s\n", oh_name);
- return;
- }
+ oh = omap_hwmod_lookup(oh_name);
+ if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",
+ __func__, oh_name))
+ return;
- od = omap_device_build(name, bus_id, oh, &musb_plat,
- sizeof(musb_plat), omap_musb_latency,
- ARRAY_SIZE(omap_musb_latency), false);
- if (IS_ERR(od)) {
+ pdev = omap_device_build(name, bus_id, oh, &musb_plat,
+ sizeof(musb_plat), NULL, 0, false);
+ if (IS_ERR(pdev)) {
pr_err("Could not build omap_device for %s %s\n",
name, oh_name);
return;
}
- pdev = &od->pdev;
dev = &pdev->dev;
get_device(dev);
dev->dma_mask = &musb_dmamask;
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
new file mode 100644
index 0000000..031d116
--- /dev/null
+++ b/arch/arm/mach-omap2/vc.c
@@ -0,0 +1,367 @@
+/*
+ * OMAP Voltage Controller (VC) interface
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <plat/cpu.h>
+
+#include "voltage.h"
+#include "vc.h"
+#include "prm-regbits-34xx.h"
+#include "prm-regbits-44xx.h"
+#include "prm44xx.h"
+
+/**
+ * struct omap_vc_channel_cfg - describe the cfg_channel bitfield
+ * @sa: bit for slave address
+ * @rav: bit for voltage configuration register
+ * @rac: bit for command configuration register
+ * @racen: enable bit for RAC
+ * @cmd: bit for command value set selection
+ *
+ * Channel configuration bits, common for OMAP3+
+ * OMAP3 register: PRM_VC_CH_CONF
+ * OMAP4 register: PRM_VC_CFG_CHANNEL
+ * OMAP5 register: PRM_VC_SMPS_<voltdm>_CONFIG
+ */
+struct omap_vc_channel_cfg {
+ u8 sa;
+ u8 rav;
+ u8 rac;
+ u8 racen;
+ u8 cmd;
+};
+
+static struct omap_vc_channel_cfg vc_default_channel_cfg = {
+ .sa = BIT(0),
+ .rav = BIT(1),
+ .rac = BIT(2),
+ .racen = BIT(3),
+ .cmd = BIT(4),
+};
+
+/*
+ * On OMAP3+, all VC channels have the above default bitfield
+ * configuration, except the OMAP4 MPU channel. This appears
+ * to be a freak accident as every other VC channel has the
+ * default configuration, thus creating a mutant channel config.
+ */
+static struct omap_vc_channel_cfg vc_mutant_channel_cfg = {
+ .sa = BIT(0),
+ .rav = BIT(2),
+ .rac = BIT(3),
+ .racen = BIT(4),
+ .cmd = BIT(1),
+};
+
+static struct omap_vc_channel_cfg *vc_cfg_bits;
+#define CFG_CHANNEL_MASK 0x1f
+
+/**
+ * omap_vc_config_channel - configure VC channel to PMIC mappings
+ * @voltdm: pointer to voltagdomain defining the desired VC channel
+ *
+ * Configures the VC channel to PMIC mappings for the following
+ * PMIC settings
+ * - i2c slave address (SA)
+ * - voltage configuration address (RAV)
+ * - command configuration address (RAC) and enable bit (RACEN)
+ * - command values for ON, ONLP, RET and OFF (CMD)
+ *
+ * This function currently only allows flexible configuration of the
+ * non-default channel. Starting with OMAP4, there are more than 2
+ * channels, with one defined as the default (on OMAP4, it's MPU.)
+ * Only the non-default channel can be configured.
+ */
+static int omap_vc_config_channel(struct voltagedomain *voltdm)
+{
+ struct omap_vc_channel *vc = voltdm->vc;
+
+ /*
+ * For default channel, the only configurable bit is RACEN.
+ * All others must stay at zero (see function comment above.)
+ */
+ if (vc->flags & OMAP_VC_CHANNEL_DEFAULT)
+ vc->cfg_channel &= vc_cfg_bits->racen;
+
+ voltdm->rmw(CFG_CHANNEL_MASK << vc->cfg_channel_sa_shift,
+ vc->cfg_channel << vc->cfg_channel_sa_shift,
+ vc->cfg_channel_reg);
+
+ return 0;
+}
+
+/* Voltage scale and accessory APIs */
+int omap_vc_pre_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt,
+ u8 *target_vsel, u8 *current_vsel)
+{
+ struct omap_vc_channel *vc = voltdm->vc;
+ u32 vc_cmdval;
+
+ /* Check if sufficient pmic info is available for this vdd */
+ if (!voltdm->pmic) {
+ pr_err("%s: Insufficient pmic info to scale the vdd_%s\n",
+ __func__, voltdm->name);
+ return -EINVAL;
+ }
+
+ if (!voltdm->pmic->uv_to_vsel) {
+ pr_err("%s: PMIC function to convert voltage in uV to"
+ "vsel not registered. Hence unable to scale voltage"
+ "for vdd_%s\n", __func__, voltdm->name);
+ return -ENODATA;
+ }
+
+ if (!voltdm->read || !voltdm->write) {
+ pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+ __func__, voltdm->name);
+ return -EINVAL;
+ }
+
+ *target_vsel = voltdm->pmic->uv_to_vsel(target_volt);
+ *current_vsel = voltdm->pmic->uv_to_vsel(voltdm->nominal_volt);
+
+ /* Setting the ON voltage to the new target voltage */
+ vc_cmdval = voltdm->read(vc->cmdval_reg);
+ vc_cmdval &= ~vc->common->cmd_on_mask;
+ vc_cmdval |= (*target_vsel << vc->common->cmd_on_shift);
+ voltdm->write(vc_cmdval, vc->cmdval_reg);
+
+ omap_vp_update_errorgain(voltdm, target_volt);
+
+ return 0;
+}
+
+void omap_vc_post_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt,
+ u8 target_vsel, u8 current_vsel)
+{
+ u32 smps_steps = 0, smps_delay = 0;
+
+ smps_steps = abs(target_vsel - current_vsel);
+ /* SMPS slew rate / step size. 2us added as buffer. */
+ smps_delay = ((smps_steps * voltdm->pmic->step_size) /
+ voltdm->pmic->slew_rate) + 2;
+ udelay(smps_delay);
+}
+
+/* vc_bypass_scale - VC bypass method of voltage scaling */
+int omap_vc_bypass_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt)
+{
+ struct omap_vc_channel *vc = voltdm->vc;
+ u32 loop_cnt = 0, retries_cnt = 0;
+ u32 vc_valid, vc_bypass_val_reg, vc_bypass_value;
+ u8 target_vsel, current_vsel;
+ int ret;
+
+ ret = omap_vc_pre_scale(voltdm, target_volt, &target_vsel, ¤t_vsel);
+ if (ret)
+ return ret;
+
+ vc_valid = vc->common->valid;
+ vc_bypass_val_reg = vc->common->bypass_val_reg;
+ vc_bypass_value = (target_vsel << vc->common->data_shift) |
+ (vc->volt_reg_addr << vc->common->regaddr_shift) |
+ (vc->i2c_slave_addr << vc->common->slaveaddr_shift);
+
+ voltdm->write(vc_bypass_value, vc_bypass_val_reg);
+ voltdm->write(vc_bypass_value | vc_valid, vc_bypass_val_reg);
+
+ vc_bypass_value = voltdm->read(vc_bypass_val_reg);
+ /*
+ * Loop till the bypass command is acknowledged from the SMPS.
+ * NOTE: This is legacy code. The loop count and retry count needs
+ * to be revisited.
+ */
+ while (!(vc_bypass_value & vc_valid)) {
+ loop_cnt++;
+
+ if (retries_cnt > 10) {
+ pr_warning("%s: Retry count exceeded\n", __func__);
+ return -ETIMEDOUT;
+ }
+
+ if (loop_cnt > 50) {
+ retries_cnt++;
+ loop_cnt = 0;
+ udelay(10);
+ }
+ vc_bypass_value = voltdm->read(vc_bypass_val_reg);
+ }
+
+ omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel);
+ return 0;
+}
+
+static void __init omap3_vfsm_init(struct voltagedomain *voltdm)
+{
+ /*
+ * Voltage Manager FSM parameters init
+ * XXX This data should be passed in from the board file
+ */
+ voltdm->write(OMAP3_CLKSETUP, OMAP3_PRM_CLKSETUP_OFFSET);
+ voltdm->write(OMAP3_VOLTOFFSET, OMAP3_PRM_VOLTOFFSET_OFFSET);
+ voltdm->write(OMAP3_VOLTSETUP2, OMAP3_PRM_VOLTSETUP2_OFFSET);
+}
+
+static void __init omap3_vc_init_channel(struct voltagedomain *voltdm)
+{
+ static bool is_initialized;
+
+ if (is_initialized)
+ return;
+
+ omap3_vfsm_init(voltdm);
+
+ is_initialized = true;
+}
+
+
+/* OMAP4 specific voltage init functions */
+static void __init omap4_vc_init_channel(struct voltagedomain *voltdm)
+{
+ static bool is_initialized;
+ u32 vc_val;
+
+ if (is_initialized)
+ return;
+
+ /* XXX These are magic numbers and do not belong! */
+ vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT);
+ voltdm->write(vc_val, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
+
+ is_initialized = true;
+}
+
+/**
+ * omap_vc_i2c_init - initialize I2C interface to PMIC
+ * @voltdm: voltage domain containing VC data
+ *
+ * Use PMIC supplied seetings for I2C high-speed mode and
+ * master code (if set) and program the VC I2C configuration
+ * register.
+ *
+ * The VC I2C configuration is common to all VC channels,
+ * so this function only configures I2C for the first VC
+ * channel registers. All other VC channels will use the
+ * same configuration.
+ */
+static void __init omap_vc_i2c_init(struct voltagedomain *voltdm)
+{
+ struct omap_vc_channel *vc = voltdm->vc;
+ static bool initialized;
+ static bool i2c_high_speed;
+ u8 mcode;
+
+ if (initialized) {
+ if (voltdm->pmic->i2c_high_speed != i2c_high_speed)
+ pr_warn("%s: I2C config for all channels must match.",
+ __func__);
+ return;
+ }
+
+ i2c_high_speed = voltdm->pmic->i2c_high_speed;
+ if (i2c_high_speed)
+ voltdm->rmw(vc->common->i2c_cfg_hsen_mask,
+ vc->common->i2c_cfg_hsen_mask,
+ vc->common->i2c_cfg_reg);
+
+ mcode = voltdm->pmic->i2c_mcode;
+ if (mcode)
+ voltdm->rmw(vc->common->i2c_mcode_mask,
+ mcode << __ffs(vc->common->i2c_mcode_mask),
+ vc->common->i2c_cfg_reg);
+
+ initialized = true;
+}
+
+void __init omap_vc_init_channel(struct voltagedomain *voltdm)
+{
+ struct omap_vc_channel *vc = voltdm->vc;
+ u8 on_vsel, onlp_vsel, ret_vsel, off_vsel;
+ u32 val;
+
+ if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) {
+ pr_err("%s: PMIC info requried to configure vc for"
+ "vdd_%s not populated.Hence cannot initialize vc\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ if (!voltdm->read || !voltdm->write) {
+ pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ vc->cfg_channel = 0;
+ if (vc->flags & OMAP_VC_CHANNEL_CFG_MUTANT)
+ vc_cfg_bits = &vc_mutant_channel_cfg;
+ else
+ vc_cfg_bits = &vc_default_channel_cfg;
+
+ /* get PMIC/board specific settings */
+ vc->i2c_slave_addr = voltdm->pmic->i2c_slave_addr;
+ vc->volt_reg_addr = voltdm->pmic->volt_reg_addr;
+ vc->cmd_reg_addr = voltdm->pmic->cmd_reg_addr;
+ vc->setup_time = voltdm->pmic->volt_setup_time;
+
+ /* Configure the i2c slave address for this VC */
+ voltdm->rmw(vc->smps_sa_mask,
+ vc->i2c_slave_addr << __ffs(vc->smps_sa_mask),
+ vc->smps_sa_reg);
+ vc->cfg_channel |= vc_cfg_bits->sa;
+
+ /*
+ * Configure the PMIC register addresses.
+ */
+ voltdm->rmw(vc->smps_volra_mask,
+ vc->volt_reg_addr << __ffs(vc->smps_volra_mask),
+ vc->smps_volra_reg);
+ vc->cfg_channel |= vc_cfg_bits->rav;
+
+ if (vc->cmd_reg_addr) {
+ voltdm->rmw(vc->smps_cmdra_mask,
+ vc->cmd_reg_addr << __ffs(vc->smps_cmdra_mask),
+ vc->smps_cmdra_reg);
+ vc->cfg_channel |= vc_cfg_bits->rac | vc_cfg_bits->racen;
+ }
+
+ /* Set up the on, inactive, retention and off voltage */
+ on_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->on_volt);
+ onlp_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->onlp_volt);
+ ret_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->ret_volt);
+ off_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->off_volt);
+ val = ((on_vsel << vc->common->cmd_on_shift) |
+ (onlp_vsel << vc->common->cmd_onlp_shift) |
+ (ret_vsel << vc->common->cmd_ret_shift) |
+ (off_vsel << vc->common->cmd_off_shift));
+ voltdm->write(val, vc->cmdval_reg);
+ vc->cfg_channel |= vc_cfg_bits->cmd;
+
+ /* Channel configuration */
+ omap_vc_config_channel(voltdm);
+
+ /* Configure the setup times */
+ voltdm->rmw(voltdm->vfsm->voltsetup_mask,
+ vc->setup_time << __ffs(voltdm->vfsm->voltsetup_mask),
+ voltdm->vfsm->voltsetup_reg);
+
+ omap_vc_i2c_init(voltdm);
+
+ if (cpu_is_omap34xx())
+ omap3_vc_init_channel(voltdm);
+ else if (cpu_is_omap44xx())
+ omap4_vc_init_channel(voltdm);
+}
+
diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h
index e776777..478bf6b 100644
--- a/arch/arm/mach-omap2/vc.h
+++ b/arch/arm/mach-omap2/vc.h
@@ -19,12 +19,12 @@
#include <linux/kernel.h>
+struct voltagedomain;
+
/**
- * struct omap_vc_common_data - per-VC register/bitfield data
+ * struct omap_vc_common - per-VC register/bitfield data
* @cmd_on_mask: ON bitmask in PRM_VC_CMD_VAL* register
* @valid: VALID bitmask in PRM_VC_BYPASS_VAL register
- * @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start
- * @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start
* @bypass_val_reg: Offset of PRM_VC_BYPASS_VAL reg from PRM start
* @data_shift: DATA field shift in PRM_VC_BYPASS_VAL register
* @slaveaddr_shift: SLAVEADDR field shift in PRM_VC_BYPASS_VAL register
@@ -33,15 +33,16 @@
* @cmd_onlp_shift: ONLP field shift in PRM_VC_CMD_VAL_* register
* @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register
* @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register
+ * @i2c_cfg_reg: I2C configuration register offset
+ * @i2c_cfg_hsen_mask: high-speed mode bit field mask in I2C config register
+ * @i2c_mcode_mask: MCODE field mask for I2C config register
*
* XXX One of cmd_on_mask and cmd_on_shift are not needed
* XXX VALID should probably be a shift, not a mask
*/
-struct omap_vc_common_data {
+struct omap_vc_common {
u32 cmd_on_mask;
u32 valid;
- u8 smps_sa_reg;
- u8 smps_volra_reg;
u8 bypass_val_reg;
u8 data_shift;
u8 slaveaddr_shift;
@@ -50,34 +51,75 @@
u8 cmd_onlp_shift;
u8 cmd_ret_shift;
u8 cmd_off_shift;
+ u8 i2c_cfg_reg;
+ u8 i2c_cfg_hsen_mask;
+ u8 i2c_mcode_mask;
};
+/* omap_vc_channel.flags values */
+#define OMAP_VC_CHANNEL_DEFAULT BIT(0)
+#define OMAP_VC_CHANNEL_CFG_MUTANT BIT(1)
+
/**
- * struct omap_vc_instance_data - VC per-instance data
- * @vc_common: pointer to VC common data for this platform
- * @smps_sa_mask: SA* bitmask in the PRM_VC_SMPS_SA register
- * @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register
- * @smps_sa_shift: SA* field shift in the PRM_VC_SMPS_SA register
- * @smps_volra_shift: VOLRA* field shift in the PRM_VC_VOL_RA register
+ * struct omap_vc_channel - VC per-instance data
+ * @i2c_slave_addr: I2C slave address of PMIC for this VC channel
+ * @volt_reg_addr: voltage configuration register address
+ * @cmd_reg_addr: command configuration register address
+ * @setup_time: setup time (in sys_clk cycles) of regulator for this channel
+ * @cfg_channel: current value of VC channel configuration register
+ * @i2c_high_speed: whether or not to use I2C high-speed mode
*
- * XXX It is not necessary to have both a *_mask and a *_shift -
- * remove one
+ * @common: pointer to VC common data for this platform
+ * @smps_sa_mask: i2c slave address bitmask in the PRM_VC_SMPS_SA register
+ * @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register
+ * @smps_cmdra_mask: CMDRA* bitmask in the PRM_VC_CMD_RA register
+ * @cmdval_reg: register for on/ret/off voltage level values for this channel
+ * @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start
+ * @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start
+ * @smps_cmdra_reg: Offset of PRM_VC_SMPS_CMD_RA reg from PRM start
+ * @cfg_channel_reg: VC channel configuration register
+ * @cfg_channel_sa_shift: bit shift for slave address cfg_channel register
+ * @flags: VC channel-specific flags (optional)
*/
-struct omap_vc_instance_data {
- const struct omap_vc_common_data *vc_common;
+struct omap_vc_channel {
+ /* channel state */
+ u16 i2c_slave_addr;
+ u16 volt_reg_addr;
+ u16 cmd_reg_addr;
+ u16 setup_time;
+ u8 cfg_channel;
+ bool i2c_high_speed;
+
+ /* register access data */
+ const struct omap_vc_common *common;
u32 smps_sa_mask;
u32 smps_volra_mask;
+ u32 smps_cmdra_mask;
u8 cmdval_reg;
- u8 smps_sa_shift;
- u8 smps_volra_shift;
+ u8 smps_sa_reg;
+ u8 smps_volra_reg;
+ u8 smps_cmdra_reg;
+ u8 cfg_channel_reg;
+ u8 cfg_channel_sa_shift;
+ u8 flags;
};
-extern struct omap_vc_instance_data omap3_vc1_data;
-extern struct omap_vc_instance_data omap3_vc2_data;
+extern struct omap_vc_channel omap3_vc_mpu;
+extern struct omap_vc_channel omap3_vc_core;
-extern struct omap_vc_instance_data omap4_vc_mpu_data;
-extern struct omap_vc_instance_data omap4_vc_iva_data;
-extern struct omap_vc_instance_data omap4_vc_core_data;
+extern struct omap_vc_channel omap4_vc_mpu;
+extern struct omap_vc_channel omap4_vc_iva;
+extern struct omap_vc_channel omap4_vc_core;
+
+void omap_vc_init_channel(struct voltagedomain *voltdm);
+int omap_vc_pre_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt,
+ u8 *target_vsel, u8 *current_vsel);
+void omap_vc_post_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt,
+ u8 target_vsel, u8 current_vsel);
+int omap_vc_bypass_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt);
#endif
diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c
index f37dc4b..cfe348e 100644
--- a/arch/arm/mach-omap2/vc3xxx_data.c
+++ b/arch/arm/mach-omap2/vc3xxx_data.c
@@ -29,9 +29,7 @@
* VC data common to 34xx/36xx chips
* XXX This stuff presumably belongs in the vc3xxx.c or vc.c file.
*/
-static struct omap_vc_common_data omap3_vc_common = {
- .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET,
- .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET,
+static struct omap_vc_common omap3_vc_common = {
.bypass_val_reg = OMAP3_PRM_VC_BYPASS_VAL_OFFSET,
.data_shift = OMAP3430_DATA_SHIFT,
.slaveaddr_shift = OMAP3430_SLAVEADDR_SHIFT,
@@ -42,22 +40,33 @@
.cmd_onlp_shift = OMAP3430_VC_CMD_ONLP_SHIFT,
.cmd_ret_shift = OMAP3430_VC_CMD_RET_SHIFT,
.cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT,
+ .i2c_cfg_hsen_mask = OMAP3430_HSEN_MASK,
+ .i2c_cfg_reg = OMAP3_PRM_VC_I2C_CFG_OFFSET,
+ .i2c_mcode_mask = OMAP3430_MCODE_MASK,
};
-struct omap_vc_instance_data omap3_vc1_data = {
- .vc_common = &omap3_vc_common,
+struct omap_vc_channel omap3_vc_mpu = {
+ .common = &omap3_vc_common,
+ .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET,
+ .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET,
+ .smps_cmdra_reg = OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET,
+ .cfg_channel_reg = OMAP3_PRM_VC_CH_CONF_OFFSET,
.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_0_OFFSET,
- .smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT,
.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA0_MASK,
- .smps_volra_shift = OMAP3430_VOLRA0_SHIFT,
.smps_volra_mask = OMAP3430_VOLRA0_MASK,
+ .smps_cmdra_mask = OMAP3430_CMDRA0_MASK,
+ .cfg_channel_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT,
};
-struct omap_vc_instance_data omap3_vc2_data = {
- .vc_common = &omap3_vc_common,
+struct omap_vc_channel omap3_vc_core = {
+ .common = &omap3_vc_common,
+ .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET,
+ .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET,
+ .smps_cmdra_reg = OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET,
+ .cfg_channel_reg = OMAP3_PRM_VC_CH_CONF_OFFSET,
.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_1_OFFSET,
- .smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT,
.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA1_MASK,
- .smps_volra_shift = OMAP3430_VOLRA1_SHIFT,
.smps_volra_mask = OMAP3430_VOLRA1_MASK,
+ .smps_cmdra_mask = OMAP3430_CMDRA1_MASK,
+ .cfg_channel_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT,
};
diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c
index a98da8d..2740a96 100644
--- a/arch/arm/mach-omap2/vc44xx_data.c
+++ b/arch/arm/mach-omap2/vc44xx_data.c
@@ -30,9 +30,7 @@
* VC data common to 44xx chips
* XXX This stuff presumably belongs in the vc3xxx.c or vc.c file.
*/
-static const struct omap_vc_common_data omap4_vc_common = {
- .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET,
- .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET,
+static const struct omap_vc_common omap4_vc_common = {
.bypass_val_reg = OMAP4_PRM_VC_VAL_BYPASS_OFFSET,
.data_shift = OMAP4430_DATA_SHIFT,
.slaveaddr_shift = OMAP4430_SLAVEADDR_SHIFT,
@@ -43,33 +41,49 @@
.cmd_onlp_shift = OMAP4430_ONLP_SHIFT,
.cmd_ret_shift = OMAP4430_RET_SHIFT,
.cmd_off_shift = OMAP4430_OFF_SHIFT,
+ .i2c_cfg_reg = OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET,
+ .i2c_cfg_hsen_mask = OMAP4430_HSMODEEN_MASK,
+ .i2c_mcode_mask = OMAP4430_HSMCODE_MASK,
};
/* VC instance data for each controllable voltage line */
-struct omap_vc_instance_data omap4_vc_mpu_data = {
- .vc_common = &omap4_vc_common,
+struct omap_vc_channel omap4_vc_mpu = {
+ .flags = OMAP_VC_CHANNEL_DEFAULT | OMAP_VC_CHANNEL_CFG_MUTANT,
+ .common = &omap4_vc_common,
+ .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET,
+ .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET,
+ .smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET,
+ .cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET,
.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET,
- .smps_sa_shift = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT,
.smps_sa_mask = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK,
- .smps_volra_shift = OMAP4430_VOLRA_VDD_MPU_L_SHIFT,
.smps_volra_mask = OMAP4430_VOLRA_VDD_MPU_L_MASK,
+ .smps_cmdra_mask = OMAP4430_CMDRA_VDD_MPU_L_MASK,
+ .cfg_channel_sa_shift = OMAP4430_SA_VDD_MPU_L_SHIFT,
};
-struct omap_vc_instance_data omap4_vc_iva_data = {
- .vc_common = &omap4_vc_common,
+struct omap_vc_channel omap4_vc_iva = {
+ .common = &omap4_vc_common,
+ .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET,
+ .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET,
+ .smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET,
+ .cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET,
.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET,
- .smps_sa_shift = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT,
.smps_sa_mask = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK,
- .smps_volra_shift = OMAP4430_VOLRA_VDD_IVA_L_SHIFT,
.smps_volra_mask = OMAP4430_VOLRA_VDD_IVA_L_MASK,
+ .smps_cmdra_mask = OMAP4430_CMDRA_VDD_IVA_L_MASK,
+ .cfg_channel_sa_shift = OMAP4430_SA_VDD_IVA_L_SHIFT,
};
-struct omap_vc_instance_data omap4_vc_core_data = {
- .vc_common = &omap4_vc_common,
+struct omap_vc_channel omap4_vc_core = {
+ .common = &omap4_vc_common,
+ .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET,
+ .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET,
+ .smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET,
+ .cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET,
.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET,
- .smps_sa_shift = OMAP4430_SA_VDD_CORE_L_0_6_SHIFT,
.smps_sa_mask = OMAP4430_SA_VDD_CORE_L_0_6_MASK,
- .smps_volra_shift = OMAP4430_VOLRA_VDD_CORE_L_SHIFT,
.smps_volra_mask = OMAP4430_VOLRA_VDD_CORE_L_MASK,
+ .smps_cmdra_mask = OMAP4430_CMDRA_VDD_CORE_L_MASK,
+ .cfg_channel_sa_shift = OMAP4430_SA_VDD_CORE_L_SHIFT,
};
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index 9ef3789..64070ac 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -21,10 +21,10 @@
#include <linux/delay.h>
#include <linux/io.h>
-#include <linux/clk.h>
#include <linux/err.h>
#include <linux/debugfs.h>
#include <linux/slab.h>
+#include <linux/clk.h>
#include <plat/common.h>
@@ -36,839 +36,88 @@
#include "control.h"
#include "voltage.h"
+#include "powerdomain.h"
#include "vc.h"
#include "vp.h"
-#define VOLTAGE_DIR_SIZE 16
-
-
-static struct omap_vdd_info **vdd_info;
-
-/*
- * Number of scalable voltage domains.
- */
-static int nr_scalable_vdd;
-
-/* XXX document */
-static s16 prm_mod_offs;
-static s16 prm_irqst_ocp_mod_offs;
-
-static struct dentry *voltage_dir;
-
-/* Init function pointers */
-static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd,
- unsigned long target_volt);
-
-static u32 omap3_voltage_read_reg(u16 mod, u8 offset)
-{
- return omap2_prm_read_mod_reg(mod, offset);
-}
-
-static void omap3_voltage_write_reg(u32 val, u16 mod, u8 offset)
-{
- omap2_prm_write_mod_reg(val, mod, offset);
-}
-
-static u32 omap4_voltage_read_reg(u16 mod, u8 offset)
-{
- return omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
- mod, offset);
-}
-
-static void omap4_voltage_write_reg(u32 val, u16 mod, u8 offset)
-{
- omap4_prminst_write_inst_reg(val, OMAP4430_PRM_PARTITION, mod, offset);
-}
-
-static int __init _config_common_vdd_data(struct omap_vdd_info *vdd)
-{
- char *sys_ck_name;
- struct clk *sys_ck;
- u32 sys_clk_speed, timeout_val, waittime;
-
- /*
- * XXX Clockfw should handle this, or this should be in a
- * struct record
- */
- if (cpu_is_omap24xx() || cpu_is_omap34xx())
- sys_ck_name = "sys_ck";
- else if (cpu_is_omap44xx())
- sys_ck_name = "sys_clkin_ck";
- else
- return -EINVAL;
-
- /*
- * Sys clk rate is require to calculate vp timeout value and
- * smpswaittimemin and smpswaittimemax.
- */
- sys_ck = clk_get(NULL, sys_ck_name);
- if (IS_ERR(sys_ck)) {
- pr_warning("%s: Could not get the sys clk to calculate"
- "various vdd_%s params\n", __func__, vdd->voltdm.name);
- return -EINVAL;
- }
- sys_clk_speed = clk_get_rate(sys_ck);
- clk_put(sys_ck);
- /* Divide to avoid overflow */
- sys_clk_speed /= 1000;
-
- /* Generic voltage parameters */
- vdd->volt_scale = vp_forceupdate_scale_voltage;
- vdd->vp_enabled = false;
-
- vdd->vp_rt_data.vpconfig_erroroffset =
- (vdd->pmic_info->vp_erroroffset <<
- vdd->vp_data->vp_common->vpconfig_erroroffset_shift);
-
- timeout_val = (sys_clk_speed * vdd->pmic_info->vp_timeout_us) / 1000;
- vdd->vp_rt_data.vlimitto_timeout = timeout_val;
- vdd->vp_rt_data.vlimitto_vddmin = vdd->pmic_info->vp_vddmin;
- vdd->vp_rt_data.vlimitto_vddmax = vdd->pmic_info->vp_vddmax;
-
- waittime = ((vdd->pmic_info->step_size / vdd->pmic_info->slew_rate) *
- sys_clk_speed) / 1000;
- vdd->vp_rt_data.vstepmin_smpswaittimemin = waittime;
- vdd->vp_rt_data.vstepmax_smpswaittimemax = waittime;
- vdd->vp_rt_data.vstepmin_stepmin = vdd->pmic_info->vp_vstepmin;
- vdd->vp_rt_data.vstepmax_stepmax = vdd->pmic_info->vp_vstepmax;
-
- return 0;
-}
-
-/* Voltage debugfs support */
-static int vp_volt_debug_get(void *data, u64 *val)
-{
- struct omap_vdd_info *vdd = (struct omap_vdd_info *) data;
- u8 vsel;
-
- if (!vdd) {
- pr_warning("Wrong paramater passed\n");
- return -EINVAL;
- }
-
- vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage);
-
- if (!vdd->pmic_info->vsel_to_uv) {
- pr_warning("PMIC function to convert vsel to voltage"
- "in uV not registerd\n");
- return -EINVAL;
- }
-
- *val = vdd->pmic_info->vsel_to_uv(vsel);
- return 0;
-}
-
-static int nom_volt_debug_get(void *data, u64 *val)
-{
- struct omap_vdd_info *vdd = (struct omap_vdd_info *) data;
-
- if (!vdd) {
- pr_warning("Wrong paramater passed\n");
- return -EINVAL;
- }
-
- *val = omap_voltage_get_nom_volt(&vdd->voltdm);
-
- return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(vp_volt_debug_fops, vp_volt_debug_get, NULL, "%llu\n");
-DEFINE_SIMPLE_ATTRIBUTE(nom_volt_debug_fops, nom_volt_debug_get, NULL,
- "%llu\n");
-static void vp_latch_vsel(struct omap_vdd_info *vdd)
-{
- u32 vpconfig;
- unsigned long uvdc;
- char vsel;
-
- uvdc = omap_voltage_get_nom_volt(&vdd->voltdm);
- if (!uvdc) {
- pr_warning("%s: unable to find current voltage for vdd_%s\n",
- __func__, vdd->voltdm.name);
- return;
- }
-
- if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) {
- pr_warning("%s: PMIC function to convert voltage in uV to"
- " vsel not registered\n", __func__);
- return;
- }
-
- vsel = vdd->pmic_info->uv_to_vsel(uvdc);
-
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
- vpconfig &= ~(vdd->vp_data->vp_common->vpconfig_initvoltage_mask |
- vdd->vp_data->vp_common->vpconfig_initvdd);
- vpconfig |= vsel << vdd->vp_data->vp_common->vpconfig_initvoltage_shift;
-
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-
- /* Trigger initVDD value copy to voltage processor */
- vdd->write_reg((vpconfig | vdd->vp_data->vp_common->vpconfig_initvdd),
- prm_mod_offs, vdd->vp_data->vpconfig);
-
- /* Clear initVDD copy trigger bit */
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-}
-
-/* Generic voltage init functions */
-static void __init vp_init(struct omap_vdd_info *vdd)
-{
- u32 vp_val;
-
- if (!vdd->read_reg || !vdd->write_reg) {
- pr_err("%s: No read/write API for accessing vdd_%s regs\n",
- __func__, vdd->voltdm.name);
- return;
- }
-
- vp_val = vdd->vp_rt_data.vpconfig_erroroffset |
- (vdd->vp_rt_data.vpconfig_errorgain <<
- vdd->vp_data->vp_common->vpconfig_errorgain_shift) |
- vdd->vp_data->vp_common->vpconfig_timeouten;
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vpconfig);
-
- vp_val = ((vdd->vp_rt_data.vstepmin_smpswaittimemin <<
- vdd->vp_data->vp_common->vstepmin_smpswaittimemin_shift) |
- (vdd->vp_rt_data.vstepmin_stepmin <<
- vdd->vp_data->vp_common->vstepmin_stepmin_shift));
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vstepmin);
-
- vp_val = ((vdd->vp_rt_data.vstepmax_smpswaittimemax <<
- vdd->vp_data->vp_common->vstepmax_smpswaittimemax_shift) |
- (vdd->vp_rt_data.vstepmax_stepmax <<
- vdd->vp_data->vp_common->vstepmax_stepmax_shift));
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vstepmax);
-
- vp_val = ((vdd->vp_rt_data.vlimitto_vddmax <<
- vdd->vp_data->vp_common->vlimitto_vddmax_shift) |
- (vdd->vp_rt_data.vlimitto_vddmin <<
- vdd->vp_data->vp_common->vlimitto_vddmin_shift) |
- (vdd->vp_rt_data.vlimitto_timeout <<
- vdd->vp_data->vp_common->vlimitto_timeout_shift));
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vlimitto);
-}
-
-static void __init vdd_debugfs_init(struct omap_vdd_info *vdd)
-{
- char *name;
-
- name = kzalloc(VOLTAGE_DIR_SIZE, GFP_KERNEL);
- if (!name) {
- pr_warning("%s: Unable to allocate memory for debugfs"
- " directory name for vdd_%s",
- __func__, vdd->voltdm.name);
- return;
- }
- strcpy(name, "vdd_");
- strcat(name, vdd->voltdm.name);
-
- vdd->debug_dir = debugfs_create_dir(name, voltage_dir);
- kfree(name);
- if (IS_ERR(vdd->debug_dir)) {
- pr_warning("%s: Unable to create debugfs directory for"
- " vdd_%s\n", __func__, vdd->voltdm.name);
- vdd->debug_dir = NULL;
- return;
- }
-
- (void) debugfs_create_x16("vp_errorgain", S_IRUGO, vdd->debug_dir,
- &(vdd->vp_rt_data.vpconfig_errorgain));
- (void) debugfs_create_x16("vp_smpswaittimemin", S_IRUGO,
- vdd->debug_dir,
- &(vdd->vp_rt_data.vstepmin_smpswaittimemin));
- (void) debugfs_create_x8("vp_stepmin", S_IRUGO, vdd->debug_dir,
- &(vdd->vp_rt_data.vstepmin_stepmin));
- (void) debugfs_create_x16("vp_smpswaittimemax", S_IRUGO,
- vdd->debug_dir,
- &(vdd->vp_rt_data.vstepmax_smpswaittimemax));
- (void) debugfs_create_x8("vp_stepmax", S_IRUGO, vdd->debug_dir,
- &(vdd->vp_rt_data.vstepmax_stepmax));
- (void) debugfs_create_x8("vp_vddmax", S_IRUGO, vdd->debug_dir,
- &(vdd->vp_rt_data.vlimitto_vddmax));
- (void) debugfs_create_x8("vp_vddmin", S_IRUGO, vdd->debug_dir,
- &(vdd->vp_rt_data.vlimitto_vddmin));
- (void) debugfs_create_x16("vp_timeout", S_IRUGO, vdd->debug_dir,
- &(vdd->vp_rt_data.vlimitto_timeout));
- (void) debugfs_create_file("curr_vp_volt", S_IRUGO, vdd->debug_dir,
- (void *) vdd, &vp_volt_debug_fops);
- (void) debugfs_create_file("curr_nominal_volt", S_IRUGO,
- vdd->debug_dir, (void *) vdd,
- &nom_volt_debug_fops);
-}
-
-/* Voltage scale and accessory APIs */
-static int _pre_volt_scale(struct omap_vdd_info *vdd,
- unsigned long target_volt, u8 *target_vsel, u8 *current_vsel)
-{
- struct omap_volt_data *volt_data;
- const struct omap_vc_common_data *vc_common;
- const struct omap_vp_common_data *vp_common;
- u32 vc_cmdval, vp_errgain_val;
-
- vc_common = vdd->vc_data->vc_common;
- vp_common = vdd->vp_data->vp_common;
-
- /* Check if suffiecient pmic info is available for this vdd */
- if (!vdd->pmic_info) {
- pr_err("%s: Insufficient pmic info to scale the vdd_%s\n",
- __func__, vdd->voltdm.name);
- return -EINVAL;
- }
-
- if (!vdd->pmic_info->uv_to_vsel) {
- pr_err("%s: PMIC function to convert voltage in uV to"
- "vsel not registered. Hence unable to scale voltage"
- "for vdd_%s\n", __func__, vdd->voltdm.name);
- return -ENODATA;
- }
-
- if (!vdd->read_reg || !vdd->write_reg) {
- pr_err("%s: No read/write API for accessing vdd_%s regs\n",
- __func__, vdd->voltdm.name);
- return -EINVAL;
- }
-
- /* Get volt_data corresponding to target_volt */
- volt_data = omap_voltage_get_voltdata(&vdd->voltdm, target_volt);
- if (IS_ERR(volt_data))
- volt_data = NULL;
-
- *target_vsel = vdd->pmic_info->uv_to_vsel(target_volt);
- *current_vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage);
-
- /* Setting the ON voltage to the new target voltage */
- vc_cmdval = vdd->read_reg(prm_mod_offs, vdd->vc_data->cmdval_reg);
- vc_cmdval &= ~vc_common->cmd_on_mask;
- vc_cmdval |= (*target_vsel << vc_common->cmd_on_shift);
- vdd->write_reg(vc_cmdval, prm_mod_offs, vdd->vc_data->cmdval_reg);
-
- /* Setting vp errorgain based on the voltage */
- if (volt_data) {
- vp_errgain_val = vdd->read_reg(prm_mod_offs,
- vdd->vp_data->vpconfig);
- vdd->vp_rt_data.vpconfig_errorgain = volt_data->vp_errgain;
- vp_errgain_val &= ~vp_common->vpconfig_errorgain_mask;
- vp_errgain_val |= vdd->vp_rt_data.vpconfig_errorgain <<
- vp_common->vpconfig_errorgain_shift;
- vdd->write_reg(vp_errgain_val, prm_mod_offs,
- vdd->vp_data->vpconfig);
- }
-
- return 0;
-}
-
-static void _post_volt_scale(struct omap_vdd_info *vdd,
- unsigned long target_volt, u8 target_vsel, u8 current_vsel)
-{
- u32 smps_steps = 0, smps_delay = 0;
-
- smps_steps = abs(target_vsel - current_vsel);
- /* SMPS slew rate / step size. 2us added as buffer. */
- smps_delay = ((smps_steps * vdd->pmic_info->step_size) /
- vdd->pmic_info->slew_rate) + 2;
- udelay(smps_delay);
-
- vdd->curr_volt = target_volt;
-}
-
-/* vc_bypass_scale_voltage - VC bypass method of voltage scaling */
-static int vc_bypass_scale_voltage(struct omap_vdd_info *vdd,
- unsigned long target_volt)
-{
- u32 loop_cnt = 0, retries_cnt = 0;
- u32 vc_valid, vc_bypass_val_reg, vc_bypass_value;
- u8 target_vsel, current_vsel;
- int ret;
-
- ret = _pre_volt_scale(vdd, target_volt, &target_vsel, ¤t_vsel);
- if (ret)
- return ret;
-
- vc_valid = vdd->vc_data->vc_common->valid;
- vc_bypass_val_reg = vdd->vc_data->vc_common->bypass_val_reg;
- vc_bypass_value = (target_vsel << vdd->vc_data->vc_common->data_shift) |
- (vdd->pmic_info->pmic_reg <<
- vdd->vc_data->vc_common->regaddr_shift) |
- (vdd->pmic_info->i2c_slave_addr <<
- vdd->vc_data->vc_common->slaveaddr_shift);
-
- vdd->write_reg(vc_bypass_value, prm_mod_offs, vc_bypass_val_reg);
- vdd->write_reg(vc_bypass_value | vc_valid, prm_mod_offs,
- vc_bypass_val_reg);
-
- vc_bypass_value = vdd->read_reg(prm_mod_offs, vc_bypass_val_reg);
- /*
- * Loop till the bypass command is acknowledged from the SMPS.
- * NOTE: This is legacy code. The loop count and retry count needs
- * to be revisited.
- */
- while (!(vc_bypass_value & vc_valid)) {
- loop_cnt++;
-
- if (retries_cnt > 10) {
- pr_warning("%s: Retry count exceeded\n", __func__);
- return -ETIMEDOUT;
- }
-
- if (loop_cnt > 50) {
- retries_cnt++;
- loop_cnt = 0;
- udelay(10);
- }
- vc_bypass_value = vdd->read_reg(prm_mod_offs,
- vc_bypass_val_reg);
- }
-
- _post_volt_scale(vdd, target_volt, target_vsel, current_vsel);
- return 0;
-}
-
-/* VP force update method of voltage scaling */
-static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd,
- unsigned long target_volt)
-{
- u32 vpconfig;
- u8 target_vsel, current_vsel, prm_irqst_reg;
- int ret, timeout = 0;
-
- ret = _pre_volt_scale(vdd, target_volt, &target_vsel, ¤t_vsel);
- if (ret)
- return ret;
-
- prm_irqst_reg = vdd->vp_data->prm_irqst_data->prm_irqst_reg;
-
- /*
- * Clear all pending TransactionDone interrupt/status. Typical latency
- * is <3us
- */
- while (timeout++ < VP_TRANXDONE_TIMEOUT) {
- vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status,
- prm_irqst_ocp_mod_offs, prm_irqst_reg);
- if (!(vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) &
- vdd->vp_data->prm_irqst_data->tranxdone_status))
- break;
- udelay(1);
- }
- if (timeout >= VP_TRANXDONE_TIMEOUT) {
- pr_warning("%s: vdd_%s TRANXDONE timeout exceeded."
- "Voltage change aborted", __func__, vdd->voltdm.name);
- return -ETIMEDOUT;
- }
-
- /* Configure for VP-Force Update */
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
- vpconfig &= ~(vdd->vp_data->vp_common->vpconfig_initvdd |
- vdd->vp_data->vp_common->vpconfig_forceupdate |
- vdd->vp_data->vp_common->vpconfig_initvoltage_mask);
- vpconfig |= ((target_vsel <<
- vdd->vp_data->vp_common->vpconfig_initvoltage_shift));
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-
- /* Trigger initVDD value copy to voltage processor */
- vpconfig |= vdd->vp_data->vp_common->vpconfig_initvdd;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-
- /* Force update of voltage */
- vpconfig |= vdd->vp_data->vp_common->vpconfig_forceupdate;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-
- /*
- * Wait for TransactionDone. Typical latency is <200us.
- * Depends on SMPSWAITTIMEMIN/MAX and voltage change
- */
- timeout = 0;
- omap_test_timeout((vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) &
- vdd->vp_data->prm_irqst_data->tranxdone_status),
- VP_TRANXDONE_TIMEOUT, timeout);
- if (timeout >= VP_TRANXDONE_TIMEOUT)
- pr_err("%s: vdd_%s TRANXDONE timeout exceeded."
- "TRANXDONE never got set after the voltage update\n",
- __func__, vdd->voltdm.name);
-
- _post_volt_scale(vdd, target_volt, target_vsel, current_vsel);
-
- /*
- * Disable TransactionDone interrupt , clear all status, clear
- * control registers
- */
- timeout = 0;
- while (timeout++ < VP_TRANXDONE_TIMEOUT) {
- vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status,
- prm_irqst_ocp_mod_offs, prm_irqst_reg);
- if (!(vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) &
- vdd->vp_data->prm_irqst_data->tranxdone_status))
- break;
- udelay(1);
- }
-
- if (timeout >= VP_TRANXDONE_TIMEOUT)
- pr_warning("%s: vdd_%s TRANXDONE timeout exceeded while trying"
- "to clear the TRANXDONE status\n",
- __func__, vdd->voltdm.name);
-
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
- /* Clear initVDD copy trigger bit */
- vpconfig &= ~vdd->vp_data->vp_common->vpconfig_initvdd;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
- /* Clear force bit */
- vpconfig &= ~vdd->vp_data->vp_common->vpconfig_forceupdate;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-
- return 0;
-}
-
-static void __init omap3_vfsm_init(struct omap_vdd_info *vdd)
-{
- /*
- * Voltage Manager FSM parameters init
- * XXX This data should be passed in from the board file
- */
- vdd->write_reg(OMAP3_CLKSETUP, prm_mod_offs, OMAP3_PRM_CLKSETUP_OFFSET);
- vdd->write_reg(OMAP3_VOLTOFFSET, prm_mod_offs,
- OMAP3_PRM_VOLTOFFSET_OFFSET);
- vdd->write_reg(OMAP3_VOLTSETUP2, prm_mod_offs,
- OMAP3_PRM_VOLTSETUP2_OFFSET);
-}
-
-static void __init omap3_vc_init(struct omap_vdd_info *vdd)
-{
- static bool is_initialized;
- u8 on_vsel, onlp_vsel, ret_vsel, off_vsel;
- u32 vc_val;
-
- if (is_initialized)
- return;
-
- /* Set up the on, inactive, retention and off voltage */
- on_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->on_volt);
- onlp_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->onlp_volt);
- ret_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->ret_volt);
- off_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->off_volt);
- vc_val = ((on_vsel << vdd->vc_data->vc_common->cmd_on_shift) |
- (onlp_vsel << vdd->vc_data->vc_common->cmd_onlp_shift) |
- (ret_vsel << vdd->vc_data->vc_common->cmd_ret_shift) |
- (off_vsel << vdd->vc_data->vc_common->cmd_off_shift));
- vdd->write_reg(vc_val, prm_mod_offs, vdd->vc_data->cmdval_reg);
-
- /*
- * Generic VC parameters init
- * XXX This data should be abstracted out
- */
- vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, prm_mod_offs,
- OMAP3_PRM_VC_CH_CONF_OFFSET);
- vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, prm_mod_offs,
- OMAP3_PRM_VC_I2C_CFG_OFFSET);
-
- omap3_vfsm_init(vdd);
-
- is_initialized = true;
-}
-
-
-/* OMAP4 specific voltage init functions */
-static void __init omap4_vc_init(struct omap_vdd_info *vdd)
-{
- static bool is_initialized;
- u32 vc_val;
-
- if (is_initialized)
- return;
-
- /* TODO: Configure setup times and CMD_VAL values*/
-
- /*
- * Generic VC parameters init
- * XXX This data should be abstracted out
- */
- vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK |
- OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK |
- OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK);
- vdd->write_reg(vc_val, prm_mod_offs, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET);
-
- /* XXX These are magic numbers and do not belong! */
- vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT);
- vdd->write_reg(vc_val, prm_mod_offs, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
-
- is_initialized = true;
-}
-
-static void __init omap_vc_init(struct omap_vdd_info *vdd)
-{
- u32 vc_val;
-
- if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) {
- pr_err("%s: PMIC info requried to configure vc for"
- "vdd_%s not populated.Hence cannot initialize vc\n",
- __func__, vdd->voltdm.name);
- return;
- }
-
- if (!vdd->read_reg || !vdd->write_reg) {
- pr_err("%s: No read/write API for accessing vdd_%s regs\n",
- __func__, vdd->voltdm.name);
- return;
- }
-
- /* Set up the SMPS_SA(i2c slave address in VC */
- vc_val = vdd->read_reg(prm_mod_offs,
- vdd->vc_data->vc_common->smps_sa_reg);
- vc_val &= ~vdd->vc_data->smps_sa_mask;
- vc_val |= vdd->pmic_info->i2c_slave_addr << vdd->vc_data->smps_sa_shift;
- vdd->write_reg(vc_val, prm_mod_offs,
- vdd->vc_data->vc_common->smps_sa_reg);
-
- /* Setup the VOLRA(pmic reg addr) in VC */
- vc_val = vdd->read_reg(prm_mod_offs,
- vdd->vc_data->vc_common->smps_volra_reg);
- vc_val &= ~vdd->vc_data->smps_volra_mask;
- vc_val |= vdd->pmic_info->pmic_reg << vdd->vc_data->smps_volra_shift;
- vdd->write_reg(vc_val, prm_mod_offs,
- vdd->vc_data->vc_common->smps_volra_reg);
-
- /* Configure the setup times */
- vc_val = vdd->read_reg(prm_mod_offs, vdd->vfsm->voltsetup_reg);
- vc_val &= ~vdd->vfsm->voltsetup_mask;
- vc_val |= vdd->pmic_info->volt_setup_time <<
- vdd->vfsm->voltsetup_shift;
- vdd->write_reg(vc_val, prm_mod_offs, vdd->vfsm->voltsetup_reg);
-
- if (cpu_is_omap34xx())
- omap3_vc_init(vdd);
- else if (cpu_is_omap44xx())
- omap4_vc_init(vdd);
-}
-
-static int __init omap_vdd_data_configure(struct omap_vdd_info *vdd)
-{
- int ret = -EINVAL;
-
- if (!vdd->pmic_info) {
- pr_err("%s: PMIC info requried to configure vdd_%s not"
- "populated.Hence cannot initialize vdd_%s\n",
- __func__, vdd->voltdm.name, vdd->voltdm.name);
- goto ovdc_out;
- }
-
- if (IS_ERR_VALUE(_config_common_vdd_data(vdd)))
- goto ovdc_out;
-
- if (cpu_is_omap34xx()) {
- vdd->read_reg = omap3_voltage_read_reg;
- vdd->write_reg = omap3_voltage_write_reg;
- ret = 0;
- } else if (cpu_is_omap44xx()) {
- vdd->read_reg = omap4_voltage_read_reg;
- vdd->write_reg = omap4_voltage_write_reg;
- ret = 0;
- }
-
-ovdc_out:
- return ret;
-}
+static LIST_HEAD(voltdm_list);
/* Public functions */
/**
- * omap_voltage_get_nom_volt() - Gets the current non-auto-compensated voltage
- * @voltdm: pointer to the VDD for which current voltage info is needed
+ * voltdm_get_voltage() - Gets the current non-auto-compensated voltage
+ * @voltdm: pointer to the voltdm for which current voltage info is needed
*
- * API to get the current non-auto-compensated voltage for a VDD.
- * Returns 0 in case of error else returns the current voltage for the VDD.
+ * API to get the current non-auto-compensated voltage for a voltage domain.
+ * Returns 0 in case of error else returns the current voltage.
*/
-unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm)
+unsigned long voltdm_get_voltage(struct voltagedomain *voltdm)
{
- struct omap_vdd_info *vdd;
-
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return 0;
}
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
- return vdd->curr_volt;
+ return voltdm->nominal_volt;
}
/**
- * omap_vp_get_curr_volt() - API to get the current vp voltage.
- * @voltdm: pointer to the VDD.
- *
- * This API returns the current voltage for the specified voltage processor
- */
-unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm)
-{
- struct omap_vdd_info *vdd;
- u8 curr_vsel;
-
- if (!voltdm || IS_ERR(voltdm)) {
- pr_warning("%s: VDD specified does not exist!\n", __func__);
- return 0;
- }
-
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
- if (!vdd->read_reg) {
- pr_err("%s: No read API for reading vdd_%s regs\n",
- __func__, voltdm->name);
- return 0;
- }
-
- curr_vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage);
-
- if (!vdd->pmic_info || !vdd->pmic_info->vsel_to_uv) {
- pr_warning("%s: PMIC function to convert vsel to voltage"
- "in uV not registerd\n", __func__);
- return 0;
- }
-
- return vdd->pmic_info->vsel_to_uv(curr_vsel);
-}
-
-/**
- * omap_vp_enable() - API to enable a particular VP
- * @voltdm: pointer to the VDD whose VP is to be enabled.
- *
- * This API enables a particular voltage processor. Needed by the smartreflex
- * class drivers.
- */
-void omap_vp_enable(struct voltagedomain *voltdm)
-{
- struct omap_vdd_info *vdd;
- u32 vpconfig;
-
- if (!voltdm || IS_ERR(voltdm)) {
- pr_warning("%s: VDD specified does not exist!\n", __func__);
- return;
- }
-
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
- if (!vdd->read_reg || !vdd->write_reg) {
- pr_err("%s: No read/write API for accessing vdd_%s regs\n",
- __func__, voltdm->name);
- return;
- }
-
- /* If VP is already enabled, do nothing. Return */
- if (vdd->vp_enabled)
- return;
-
- vp_latch_vsel(vdd);
-
- /* Enable VP */
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
- vpconfig |= vdd->vp_data->vp_common->vpconfig_vpenable;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
- vdd->vp_enabled = true;
-}
-
-/**
- * omap_vp_disable() - API to disable a particular VP
- * @voltdm: pointer to the VDD whose VP is to be disabled.
- *
- * This API disables a particular voltage processor. Needed by the smartreflex
- * class drivers.
- */
-void omap_vp_disable(struct voltagedomain *voltdm)
-{
- struct omap_vdd_info *vdd;
- u32 vpconfig;
- int timeout;
-
- if (!voltdm || IS_ERR(voltdm)) {
- pr_warning("%s: VDD specified does not exist!\n", __func__);
- return;
- }
-
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
- if (!vdd->read_reg || !vdd->write_reg) {
- pr_err("%s: No read/write API for accessing vdd_%s regs\n",
- __func__, voltdm->name);
- return;
- }
-
- /* If VP is already disabled, do nothing. Return */
- if (!vdd->vp_enabled) {
- pr_warning("%s: Trying to disable VP for vdd_%s when"
- "it is already disabled\n", __func__, voltdm->name);
- return;
- }
-
- /* Disable VP */
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
- vpconfig &= ~vdd->vp_data->vp_common->vpconfig_vpenable;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-
- /*
- * Wait for VP idle Typical latency is <2us. Maximum latency is ~100us
- */
- omap_test_timeout((vdd->read_reg(prm_mod_offs, vdd->vp_data->vstatus)),
- VP_IDLE_TIMEOUT, timeout);
-
- if (timeout >= VP_IDLE_TIMEOUT)
- pr_warning("%s: vdd_%s idle timedout\n",
- __func__, voltdm->name);
-
- vdd->vp_enabled = false;
-
- return;
-}
-
-/**
- * omap_voltage_scale_vdd() - API to scale voltage of a particular
- * voltage domain.
- * @voltdm: pointer to the VDD which is to be scaled.
- * @target_volt: The target voltage of the voltage domain
+ * voltdm_scale() - API to scale voltage of a particular voltage domain.
+ * @voltdm: pointer to the voltage domain which is to be scaled.
+ * @target_volt: The target voltage of the voltage domain
*
* This API should be called by the kernel to do the voltage scaling
- * for a particular voltage domain during dvfs or any other situation.
+ * for a particular voltage domain during DVFS.
*/
-int omap_voltage_scale_vdd(struct voltagedomain *voltdm,
- unsigned long target_volt)
+int voltdm_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt)
{
- struct omap_vdd_info *vdd;
+ int ret;
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return -EINVAL;
}
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
- if (!vdd->volt_scale) {
+ if (!voltdm->scale) {
pr_err("%s: No voltage scale API registered for vdd_%s\n",
__func__, voltdm->name);
return -ENODATA;
}
- return vdd->volt_scale(vdd, target_volt);
+ ret = voltdm->scale(voltdm, target_volt);
+ if (!ret)
+ voltdm->nominal_volt = target_volt;
+
+ return ret;
}
/**
- * omap_voltage_reset() - Resets the voltage of a particular voltage domain
- * to that of the current OPP.
- * @voltdm: pointer to the VDD whose voltage is to be reset.
+ * voltdm_reset() - Resets the voltage of a particular voltage domain
+ * to that of the current OPP.
+ * @voltdm: pointer to the voltage domain whose voltage is to be reset.
*
* This API finds out the correct voltage the voltage domain is supposed
* to be at and resets the voltage to that level. Should be used especially
* while disabling any voltage compensation modules.
*/
-void omap_voltage_reset(struct voltagedomain *voltdm)
+void voltdm_reset(struct voltagedomain *voltdm)
{
- unsigned long target_uvdc;
+ unsigned long target_volt;
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return;
}
- target_uvdc = omap_voltage_get_nom_volt(voltdm);
- if (!target_uvdc) {
+ target_volt = voltdm_get_voltage(voltdm);
+ if (!target_volt) {
pr_err("%s: unable to find current voltage for vdd_%s\n",
__func__, voltdm->name);
return;
}
- omap_voltage_scale_vdd(voltdm, target_uvdc);
+ voltdm_scale(voltdm, target_volt);
}
/**
@@ -884,18 +133,14 @@
*
*/
void omap_voltage_get_volttable(struct voltagedomain *voltdm,
- struct omap_volt_data **volt_data)
+ struct omap_volt_data **volt_data)
{
- struct omap_vdd_info *vdd;
-
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return;
}
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
- *volt_data = vdd->volt_data;
+ *volt_data = voltdm->volt_data;
}
/**
@@ -914,9 +159,8 @@
* domain or if there is no matching entry.
*/
struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
- unsigned long volt)
+ unsigned long volt)
{
- struct omap_vdd_info *vdd;
int i;
if (!voltdm || IS_ERR(voltdm)) {
@@ -924,17 +168,15 @@
return ERR_PTR(-EINVAL);
}
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
- if (!vdd->volt_data) {
+ if (!voltdm->volt_data) {
pr_warning("%s: voltage table does not exist for vdd_%s\n",
__func__, voltdm->name);
return ERR_PTR(-ENODATA);
}
- for (i = 0; vdd->volt_data[i].volt_nominal != 0; i++) {
- if (vdd->volt_data[i].volt_nominal == volt)
- return &vdd->volt_data[i];
+ for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) {
+ if (voltdm->volt_data[i].volt_nominal == volt)
+ return &voltdm->volt_data[i];
}
pr_notice("%s: Unable to match the current voltage with the voltage"
@@ -947,54 +189,25 @@
* omap_voltage_register_pmic() - API to register PMIC specific data
* @voltdm: pointer to the VDD for which the PMIC specific data is
* to be registered
- * @pmic_info: the structure containing pmic info
+ * @pmic: the structure containing pmic info
*
* This API is to be called by the SOC/PMIC file to specify the
- * pmic specific info as present in omap_volt_pmic_info structure.
+ * pmic specific info as present in omap_voltdm_pmic structure.
*/
int omap_voltage_register_pmic(struct voltagedomain *voltdm,
- struct omap_volt_pmic_info *pmic_info)
+ struct omap_voltdm_pmic *pmic)
{
- struct omap_vdd_info *vdd;
-
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return -EINVAL;
}
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
- vdd->pmic_info = pmic_info;
+ voltdm->pmic = pmic;
return 0;
}
/**
- * omap_voltage_get_dbgdir() - API to get pointer to the debugfs directory
- * corresponding to a voltage domain.
- *
- * @voltdm: pointer to the VDD whose debug directory is required.
- *
- * This API returns pointer to the debugfs directory corresponding
- * to the voltage domain. Should be used by drivers requiring to
- * add any debug entry for a particular voltage domain. Returns NULL
- * in case of error.
- */
-struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm)
-{
- struct omap_vdd_info *vdd;
-
- if (!voltdm || IS_ERR(voltdm)) {
- pr_warning("%s: VDD specified does not exist!\n", __func__);
- return NULL;
- }
-
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
- return vdd->debug_dir;
-}
-
-/**
* omap_change_voltscale_method() - API to change the voltage scaling method.
* @voltdm: pointer to the VDD whose voltage scaling method
* has to be changed.
@@ -1005,23 +218,19 @@
* defined in voltage.h
*/
void omap_change_voltscale_method(struct voltagedomain *voltdm,
- int voltscale_method)
+ int voltscale_method)
{
- struct omap_vdd_info *vdd;
-
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return;
}
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
switch (voltscale_method) {
case VOLTSCALE_VPFORCEUPDATE:
- vdd->volt_scale = vp_forceupdate_scale_voltage;
+ voltdm->scale = omap_vp_forceupdate_scale;
return;
case VOLTSCALE_VCBYPASS:
- vdd->volt_scale = vc_bypass_scale_voltage;
+ voltdm->scale = omap_vc_bypass_scale;
return;
default:
pr_warning("%s: Trying to change the method of voltage scaling"
@@ -1030,38 +239,6 @@
}
/**
- * omap_voltage_domain_lookup() - API to get the voltage domain pointer
- * @name: Name of the voltage domain
- *
- * This API looks up in the global vdd_info struct for the
- * existence of voltage domain <name>. If it exists, the API returns
- * a pointer to the voltage domain structure corresponding to the
- * VDD<name>. Else retuns error pointer.
- */
-struct voltagedomain *omap_voltage_domain_lookup(char *name)
-{
- int i;
-
- if (!vdd_info) {
- pr_err("%s: Voltage driver init not yet happened.Faulting!\n",
- __func__);
- return ERR_PTR(-EINVAL);
- }
-
- if (!name) {
- pr_err("%s: No name to get the votage domain!\n", __func__);
- return ERR_PTR(-EINVAL);
- }
-
- for (i = 0; i < nr_scalable_vdd; i++) {
- if (!(strcmp(name, vdd_info[i]->voltdm.name)))
- return &vdd_info[i]->voltdm;
- }
-
- return ERR_PTR(-EINVAL);
-}
-
-/**
* omap_voltage_late_init() - Init the various voltage parameters
*
* This API is to be called in the later stages of the
@@ -1070,37 +247,184 @@
*/
int __init omap_voltage_late_init(void)
{
- int i;
+ struct voltagedomain *voltdm;
- if (!vdd_info) {
+ if (list_empty(&voltdm_list)) {
pr_err("%s: Voltage driver support not added\n",
__func__);
return -EINVAL;
}
- voltage_dir = debugfs_create_dir("voltage", NULL);
- if (IS_ERR(voltage_dir))
- pr_err("%s: Unable to create voltage debugfs main dir\n",
- __func__);
- for (i = 0; i < nr_scalable_vdd; i++) {
- if (omap_vdd_data_configure(vdd_info[i]))
+ list_for_each_entry(voltdm, &voltdm_list, node) {
+ struct clk *sys_ck;
+
+ if (!voltdm->scalable)
continue;
- omap_vc_init(vdd_info[i]);
- vp_init(vdd_info[i]);
- vdd_debugfs_init(vdd_info[i]);
+
+ sys_ck = clk_get(NULL, voltdm->sys_clk.name);
+ if (IS_ERR(sys_ck)) {
+ pr_warning("%s: Could not get sys clk.\n", __func__);
+ return -EINVAL;
+ }
+ voltdm->sys_clk.rate = clk_get_rate(sys_ck);
+ WARN_ON(!voltdm->sys_clk.rate);
+ clk_put(sys_ck);
+
+ if (voltdm->vc) {
+ voltdm->scale = omap_vc_bypass_scale;
+ omap_vc_init_channel(voltdm);
+ }
+
+ if (voltdm->vp) {
+ voltdm->scale = omap_vp_forceupdate_scale;
+ omap_vp_init(voltdm);
+ }
}
return 0;
}
-/* XXX document */
-int __init omap_voltage_early_init(s16 prm_mod, s16 prm_irqst_ocp_mod,
- struct omap_vdd_info *omap_vdd_array[],
- u8 omap_vdd_count)
+static struct voltagedomain *_voltdm_lookup(const char *name)
{
- prm_mod_offs = prm_mod;
- prm_irqst_ocp_mod_offs = prm_irqst_ocp_mod;
- vdd_info = omap_vdd_array;
- nr_scalable_vdd = omap_vdd_count;
+ struct voltagedomain *voltdm, *temp_voltdm;
+
+ voltdm = NULL;
+
+ list_for_each_entry(temp_voltdm, &voltdm_list, node) {
+ if (!strcmp(name, temp_voltdm->name)) {
+ voltdm = temp_voltdm;
+ break;
+ }
+ }
+
+ return voltdm;
+}
+
+/**
+ * voltdm_add_pwrdm - add a powerdomain to a voltagedomain
+ * @voltdm: struct voltagedomain * to add the powerdomain to
+ * @pwrdm: struct powerdomain * to associate with a voltagedomain
+ *
+ * Associate the powerdomain @pwrdm with a voltagedomain @voltdm. This
+ * enables the use of voltdm_for_each_pwrdm(). Returns -EINVAL if
+ * presented with invalid pointers; -ENOMEM if memory could not be allocated;
+ * or 0 upon success.
+ */
+int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm)
+{
+ if (!voltdm || !pwrdm)
+ return -EINVAL;
+
+ pr_debug("voltagedomain: associating powerdomain %s with voltagedomain "
+ "%s\n", pwrdm->name, voltdm->name);
+
+ list_add(&pwrdm->voltdm_node, &voltdm->pwrdm_list);
+
return 0;
}
+
+/**
+ * voltdm_for_each_pwrdm - call function for each pwrdm in a voltdm
+ * @voltdm: struct voltagedomain * to iterate over
+ * @fn: callback function *
+ *
+ * Call the supplied function @fn for each powerdomain in the
+ * voltagedomain @voltdm. Returns -EINVAL if presented with invalid
+ * pointers; or passes along the last return value of the callback
+ * function, which should be 0 for success or anything else to
+ * indicate failure.
+ */
+int voltdm_for_each_pwrdm(struct voltagedomain *voltdm,
+ int (*fn)(struct voltagedomain *voltdm,
+ struct powerdomain *pwrdm))
+{
+ struct powerdomain *pwrdm;
+ int ret = 0;
+
+ if (!fn)
+ return -EINVAL;
+
+ list_for_each_entry(pwrdm, &voltdm->pwrdm_list, voltdm_node)
+ ret = (*fn)(voltdm, pwrdm);
+
+ return ret;
+}
+
+/**
+ * voltdm_for_each - call function on each registered voltagedomain
+ * @fn: callback function *
+ *
+ * Call the supplied function @fn for each registered voltagedomain.
+ * The callback function @fn can return anything but 0 to bail out
+ * early from the iterator. Returns the last return value of the
+ * callback function, which should be 0 for success or anything else
+ * to indicate failure; or -EINVAL if the function pointer is null.
+ */
+int voltdm_for_each(int (*fn)(struct voltagedomain *voltdm, void *user),
+ void *user)
+{
+ struct voltagedomain *temp_voltdm;
+ int ret = 0;
+
+ if (!fn)
+ return -EINVAL;
+
+ list_for_each_entry(temp_voltdm, &voltdm_list, node) {
+ ret = (*fn)(temp_voltdm, user);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+
+static int _voltdm_register(struct voltagedomain *voltdm)
+{
+ if (!voltdm || !voltdm->name)
+ return -EINVAL;
+
+ INIT_LIST_HEAD(&voltdm->pwrdm_list);
+ list_add(&voltdm->node, &voltdm_list);
+
+ pr_debug("voltagedomain: registered %s\n", voltdm->name);
+
+ return 0;
+}
+
+/**
+ * voltdm_lookup - look up a voltagedomain by name, return a pointer
+ * @name: name of voltagedomain
+ *
+ * Find a registered voltagedomain by its name @name. Returns a pointer
+ * to the struct voltagedomain if found, or NULL otherwise.
+ */
+struct voltagedomain *voltdm_lookup(const char *name)
+{
+ struct voltagedomain *voltdm ;
+
+ if (!name)
+ return NULL;
+
+ voltdm = _voltdm_lookup(name);
+
+ return voltdm;
+}
+
+/**
+ * voltdm_init - set up the voltagedomain layer
+ * @voltdm_list: array of struct voltagedomain pointers to register
+ *
+ * Loop through the array of voltagedomains @voltdm_list, registering all
+ * that are available on the current CPU. If voltdm_list is supplied
+ * and not null, all of the referenced voltagedomains will be
+ * registered. No return value.
+ */
+void voltdm_init(struct voltagedomain **voltdms)
+{
+ struct voltagedomain **v;
+
+ if (voltdms) {
+ for (v = voltdms; *v; v++)
+ _voltdm_register(*v);
+ }
+}
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index e9f5408..16a1b09 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -19,6 +19,8 @@
#include "vc.h"
#include "vp.h"
+struct powerdomain;
+
/* XXX document */
#define VOLTSCALE_VPFORCEUPDATE 1
#define VOLTSCALE_VCBYPASS 2
@@ -32,29 +34,60 @@
#define OMAP3_VOLTSETUP2 0xff
/**
- * struct omap_vfsm_instance_data - per-voltage manager FSM register/bitfield
+ * struct omap_vfsm_instance - per-voltage manager FSM register/bitfield
* data
* @voltsetup_mask: SETUP_TIME* bitmask in the PRM_VOLTSETUP* register
* @voltsetup_reg: register offset of PRM_VOLTSETUP from PRM base
- * @voltsetup_shift: SETUP_TIME* field shift in the PRM_VOLTSETUP* register
*
* XXX What about VOLTOFFSET/VOLTCTRL?
- * XXX It is not necessary to have both a _mask and a _shift for the same
- * bitfield - remove one!
*/
-struct omap_vfsm_instance_data {
+struct omap_vfsm_instance {
u32 voltsetup_mask;
u8 voltsetup_reg;
- u8 voltsetup_shift;
};
/**
* struct voltagedomain - omap voltage domain global structure.
- * @name: Name of the voltage domain which can be used as a unique
- * identifier.
+ * @name: Name of the voltage domain which can be used as a unique identifier.
+ * @scalable: Whether or not this voltage domain is scalable
+ * @node: list_head linking all voltage domains
+ * @pwrdm_list: list_head linking all powerdomains in this voltagedomain
+ * @vc: pointer to VC channel associated with this voltagedomain
+ * @vp: pointer to VP associated with this voltagedomain
+ * @read: read a VC/VP register
+ * @write: write a VC/VP register
+ * @read: read-modify-write a VC/VP register
+ * @sys_clk: system clock name/frequency, used for various timing calculations
+ * @scale: function used to scale the voltage of the voltagedomain
+ * @nominal_volt: current nominal voltage for this voltage domain
+ * @volt_data: voltage table having the distinct voltages supported
+ * by the domain and other associated per voltage data.
*/
struct voltagedomain {
char *name;
+ bool scalable;
+ struct list_head node;
+ struct list_head pwrdm_list;
+ struct omap_vc_channel *vc;
+ const struct omap_vfsm_instance *vfsm;
+ struct omap_vp_instance *vp;
+ struct omap_voltdm_pmic *pmic;
+
+ /* VC/VP register access functions: SoC specific */
+ u32 (*read) (u8 offset);
+ void (*write) (u32 val, u8 offset);
+ u32 (*rmw)(u32 mask, u32 bits, u8 offset);
+
+ union {
+ const char *name;
+ u32 rate;
+ } sys_clk;
+
+ int (*scale) (struct voltagedomain *voltdm,
+ unsigned long target_volt);
+
+ u32 nominal_volt;
+ struct omap_volt_data *volt_data;
};
/**
@@ -77,13 +110,18 @@
};
/**
- * struct omap_volt_pmic_info - PMIC specific data required by voltage driver.
+ * struct omap_voltdm_pmic - PMIC specific data required by voltage driver.
* @slew_rate: PMIC slew rate (in uv/us)
* @step_size: PMIC voltage step size (in uv)
+ * @i2c_slave_addr: I2C slave address of PMIC
+ * @volt_reg_addr: voltage configuration register address
+ * @cmd_reg_addr: command (on, on-LP, ret, off) configuration register address
+ * @i2c_high_speed: whether VC uses I2C high-speed mode to PMIC
+ * @i2c_mcode: master code value for I2C high-speed preamble transmission
* @vsel_to_uv: PMIC API to convert vsel value to actual voltage in uV.
* @uv_to_vsel: PMIC API to convert voltage in uV to vsel value.
*/
-struct omap_volt_pmic_info {
+struct omap_voltdm_pmic {
int slew_rate;
int step_size;
u32 on_volt;
@@ -91,94 +129,44 @@
u32 ret_volt;
u32 off_volt;
u16 volt_setup_time;
+ u16 i2c_slave_addr;
+ u16 volt_reg_addr;
+ u16 cmd_reg_addr;
u8 vp_erroroffset;
u8 vp_vstepmin;
u8 vp_vstepmax;
u8 vp_vddmin;
u8 vp_vddmax;
u8 vp_timeout_us;
- u8 i2c_slave_addr;
- u8 pmic_reg;
+ bool i2c_high_speed;
+ u8 i2c_mcode;
unsigned long (*vsel_to_uv) (const u8 vsel);
u8 (*uv_to_vsel) (unsigned long uV);
};
-/**
- * omap_vdd_info - Per Voltage Domain info
- *
- * @volt_data : voltage table having the distinct voltages supported
- * by the domain and other associated per voltage data.
- * @pmic_info : pmic specific parameters which should be populted by
- * the pmic drivers.
- * @vp_data : the register values, shifts, masks for various
- * vp registers
- * @vp_rt_data : VP data derived at runtime, not predefined
- * @vc_data : structure containing various various vc registers,
- * shifts, masks etc.
- * @vfsm : voltage manager FSM data
- * @voltdm : pointer to the voltage domain structure
- * @debug_dir : debug directory for this voltage domain.
- * @curr_volt : current voltage for this vdd.
- * @vp_enabled : flag to keep track of whether vp is enabled or not
- * @volt_scale : API to scale the voltage of the vdd.
- */
-struct omap_vdd_info {
- struct omap_volt_data *volt_data;
- struct omap_volt_pmic_info *pmic_info;
- struct omap_vp_instance_data *vp_data;
- struct omap_vp_runtime_data vp_rt_data;
- struct omap_vc_instance_data *vc_data;
- const struct omap_vfsm_instance_data *vfsm;
- struct voltagedomain voltdm;
- struct dentry *debug_dir;
- u32 curr_volt;
- bool vp_enabled;
- u32 (*read_reg) (u16 mod, u8 offset);
- void (*write_reg) (u32 val, u16 mod, u8 offset);
- int (*volt_scale) (struct omap_vdd_info *vdd,
- unsigned long target_volt);
-};
-
-unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm);
-void omap_vp_enable(struct voltagedomain *voltdm);
-void omap_vp_disable(struct voltagedomain *voltdm);
-int omap_voltage_scale_vdd(struct voltagedomain *voltdm,
- unsigned long target_volt);
-void omap_voltage_reset(struct voltagedomain *voltdm);
void omap_voltage_get_volttable(struct voltagedomain *voltdm,
struct omap_volt_data **volt_data);
struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
unsigned long volt);
-unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm);
-struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm);
-int __init omap_voltage_early_init(s16 prm_mod, s16 prm_irqst_mod,
- struct omap_vdd_info *omap_vdd_array[],
- u8 omap_vdd_count);
-#ifdef CONFIG_PM
int omap_voltage_register_pmic(struct voltagedomain *voltdm,
- struct omap_volt_pmic_info *pmic_info);
+ struct omap_voltdm_pmic *pmic);
void omap_change_voltscale_method(struct voltagedomain *voltdm,
int voltscale_method);
-/* API to get the voltagedomain pointer */
-struct voltagedomain *omap_voltage_domain_lookup(char *name);
-
int omap_voltage_late_init(void);
-#else
-static inline int omap_voltage_register_pmic(struct voltagedomain *voltdm,
- struct omap_volt_pmic_info *pmic_info)
-{
- return -EINVAL;
-}
-static inline void omap_change_voltscale_method(struct voltagedomain *voltdm,
- int voltscale_method) {}
-static inline int omap_voltage_late_init(void)
-{
- return -EINVAL;
-}
-static inline struct voltagedomain *omap_voltage_domain_lookup(char *name)
-{
- return ERR_PTR(-EINVAL);
-}
-#endif
+extern void omap2xxx_voltagedomains_init(void);
+extern void omap3xxx_voltagedomains_init(void);
+extern void omap44xx_voltagedomains_init(void);
+
+struct voltagedomain *voltdm_lookup(const char *name);
+void voltdm_init(struct voltagedomain **voltdm_list);
+int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm);
+int voltdm_for_each(int (*fn)(struct voltagedomain *voltdm, void *user),
+ void *user);
+int voltdm_for_each_pwrdm(struct voltagedomain *voltdm,
+ int (*fn)(struct voltagedomain *voltdm,
+ struct powerdomain *pwrdm));
+int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
+void voltdm_reset(struct voltagedomain *voltdm);
+unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
#endif
diff --git a/arch/arm/mach-omap2/voltagedomains2xxx_data.c b/arch/arm/mach-omap2/voltagedomains2xxx_data.c
new file mode 100644
index 0000000..7a41349
--- /dev/null
+++ b/arch/arm/mach-omap2/voltagedomains2xxx_data.c
@@ -0,0 +1,32 @@
+/*
+ * OMAP3 voltage domain data
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include "voltage.h"
+
+static struct voltagedomain omap2_voltdm_core = {
+ .name = "core",
+};
+
+static struct voltagedomain omap2_voltdm_wkup = {
+ .name = "wakeup",
+};
+
+static struct voltagedomain *voltagedomains_omap2[] __initdata = {
+ &omap2_voltdm_core,
+ &omap2_voltdm_wkup,
+ NULL,
+};
+
+void __init omap2xxx_voltagedomains_init(void)
+{
+ voltdm_init(voltagedomains_omap2);
+}
diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
index def230f..071101d 100644
--- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
@@ -31,65 +31,70 @@
* VDD data
*/
-static const struct omap_vfsm_instance_data omap3_vdd1_vfsm_data = {
+static const struct omap_vfsm_instance omap3_vdd1_vfsm = {
.voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET,
- .voltsetup_shift = OMAP3430_SETUP_TIME1_SHIFT,
.voltsetup_mask = OMAP3430_SETUP_TIME1_MASK,
};
-static struct omap_vdd_info omap3_vdd1_info = {
- .vp_data = &omap3_vp1_data,
- .vc_data = &omap3_vc1_data,
- .vfsm = &omap3_vdd1_vfsm_data,
- .voltdm = {
- .name = "mpu",
- },
-};
-
-static const struct omap_vfsm_instance_data omap3_vdd2_vfsm_data = {
+static const struct omap_vfsm_instance omap3_vdd2_vfsm = {
.voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET,
- .voltsetup_shift = OMAP3430_SETUP_TIME2_SHIFT,
.voltsetup_mask = OMAP3430_SETUP_TIME2_MASK,
};
-static struct omap_vdd_info omap3_vdd2_info = {
- .vp_data = &omap3_vp2_data,
- .vc_data = &omap3_vc2_data,
- .vfsm = &omap3_vdd2_vfsm_data,
- .voltdm = {
- .name = "core",
- },
+static struct voltagedomain omap3_voltdm_mpu = {
+ .name = "mpu_iva",
+ .scalable = true,
+ .read = omap3_prm_vcvp_read,
+ .write = omap3_prm_vcvp_write,
+ .rmw = omap3_prm_vcvp_rmw,
+ .vc = &omap3_vc_mpu,
+ .vfsm = &omap3_vdd1_vfsm,
+ .vp = &omap3_vp_mpu,
};
-/* OMAP3 VDD structures */
-static struct omap_vdd_info *omap3_vdd_info[] = {
- &omap3_vdd1_info,
- &omap3_vdd2_info,
+static struct voltagedomain omap3_voltdm_core = {
+ .name = "core",
+ .scalable = true,
+ .read = omap3_prm_vcvp_read,
+ .write = omap3_prm_vcvp_write,
+ .rmw = omap3_prm_vcvp_rmw,
+ .vc = &omap3_vc_core,
+ .vfsm = &omap3_vdd2_vfsm,
+ .vp = &omap3_vp_core,
};
-/* OMAP3 specific voltage init functions */
-static int __init omap3xxx_voltage_early_init(void)
+static struct voltagedomain omap3_voltdm_wkup = {
+ .name = "wakeup",
+};
+
+static struct voltagedomain *voltagedomains_omap3[] __initdata = {
+ &omap3_voltdm_mpu,
+ &omap3_voltdm_core,
+ &omap3_voltdm_wkup,
+ NULL,
+};
+
+static const char *sys_clk_name __initdata = "sys_ck";
+
+void __init omap3xxx_voltagedomains_init(void)
{
- s16 prm_mod = OMAP3430_GR_MOD;
- s16 prm_irqst_ocp_mod = OCP_MOD;
-
- if (!cpu_is_omap34xx())
- return 0;
+ struct voltagedomain *voltdm;
+ int i;
/*
* XXX Will depend on the process, validation, and binning
* for the currently-running IC
*/
if (cpu_is_omap3630()) {
- omap3_vdd1_info.volt_data = omap36xx_vddmpu_volt_data;
- omap3_vdd2_info.volt_data = omap36xx_vddcore_volt_data;
+ omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data;
+ omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data;
} else {
- omap3_vdd1_info.volt_data = omap34xx_vddmpu_volt_data;
- omap3_vdd2_info.volt_data = omap34xx_vddcore_volt_data;
+ omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data;
+ omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data;
}
- return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod,
- omap3_vdd_info,
- ARRAY_SIZE(omap3_vdd_info));
+ for (i = 0; voltdm = voltagedomains_omap3[i], voltdm; i++)
+ voltdm->sys_clk.name = sys_clk_name;
+
+ voltdm_init(voltagedomains_omap3);
};
-core_initcall(omap3xxx_voltage_early_init);
diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c
index cb64996..c4584e9 100644
--- a/arch/arm/mach-omap2/voltagedomains44xx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c
@@ -32,71 +32,80 @@
#include "vc.h"
#include "vp.h"
-static const struct omap_vfsm_instance_data omap4_vdd_mpu_vfsm_data = {
+static const struct omap_vfsm_instance omap4_vdd_mpu_vfsm = {
.voltsetup_reg = OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET,
};
-static struct omap_vdd_info omap4_vdd_mpu_info = {
- .vp_data = &omap4_vp_mpu_data,
- .vc_data = &omap4_vc_mpu_data,
- .vfsm = &omap4_vdd_mpu_vfsm_data,
- .voltdm = {
- .name = "mpu",
- },
-};
-
-static const struct omap_vfsm_instance_data omap4_vdd_iva_vfsm_data = {
+static const struct omap_vfsm_instance omap4_vdd_iva_vfsm = {
.voltsetup_reg = OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET,
};
-static struct omap_vdd_info omap4_vdd_iva_info = {
- .vp_data = &omap4_vp_iva_data,
- .vc_data = &omap4_vc_iva_data,
- .vfsm = &omap4_vdd_iva_vfsm_data,
- .voltdm = {
- .name = "iva",
- },
-};
-
-static const struct omap_vfsm_instance_data omap4_vdd_core_vfsm_data = {
+static const struct omap_vfsm_instance omap4_vdd_core_vfsm = {
.voltsetup_reg = OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET,
};
-static struct omap_vdd_info omap4_vdd_core_info = {
- .vp_data = &omap4_vp_core_data,
- .vc_data = &omap4_vc_core_data,
- .vfsm = &omap4_vdd_core_vfsm_data,
- .voltdm = {
- .name = "core",
- },
+static struct voltagedomain omap4_voltdm_mpu = {
+ .name = "mpu",
+ .scalable = true,
+ .read = omap4_prm_vcvp_read,
+ .write = omap4_prm_vcvp_write,
+ .rmw = omap4_prm_vcvp_rmw,
+ .vc = &omap4_vc_mpu,
+ .vfsm = &omap4_vdd_mpu_vfsm,
+ .vp = &omap4_vp_mpu,
};
-/* OMAP4 VDD structures */
-static struct omap_vdd_info *omap4_vdd_info[] = {
- &omap4_vdd_mpu_info,
- &omap4_vdd_iva_info,
- &omap4_vdd_core_info,
+static struct voltagedomain omap4_voltdm_iva = {
+ .name = "iva",
+ .scalable = true,
+ .read = omap4_prm_vcvp_read,
+ .write = omap4_prm_vcvp_write,
+ .rmw = omap4_prm_vcvp_rmw,
+ .vc = &omap4_vc_iva,
+ .vfsm = &omap4_vdd_iva_vfsm,
+ .vp = &omap4_vp_iva,
};
-/* OMAP4 specific voltage init functions */
-static int __init omap44xx_voltage_early_init(void)
+static struct voltagedomain omap4_voltdm_core = {
+ .name = "core",
+ .scalable = true,
+ .read = omap4_prm_vcvp_read,
+ .write = omap4_prm_vcvp_write,
+ .rmw = omap4_prm_vcvp_rmw,
+ .vc = &omap4_vc_core,
+ .vfsm = &omap4_vdd_core_vfsm,
+ .vp = &omap4_vp_core,
+};
+
+static struct voltagedomain omap4_voltdm_wkup = {
+ .name = "wakeup",
+};
+
+static struct voltagedomain *voltagedomains_omap4[] __initdata = {
+ &omap4_voltdm_mpu,
+ &omap4_voltdm_iva,
+ &omap4_voltdm_core,
+ &omap4_voltdm_wkup,
+ NULL,
+};
+
+static const char *sys_clk_name __initdata = "sys_clkin_ck";
+
+void __init omap44xx_voltagedomains_init(void)
{
- s16 prm_mod = OMAP4430_PRM_DEVICE_INST;
- s16 prm_irqst_ocp_mod = OMAP4430_PRM_OCP_SOCKET_INST;
-
- if (!cpu_is_omap44xx())
- return 0;
+ struct voltagedomain *voltdm;
+ int i;
/*
* XXX Will depend on the process, validation, and binning
* for the currently-running IC
*/
- omap4_vdd_mpu_info.volt_data = omap44xx_vdd_mpu_volt_data;
- omap4_vdd_iva_info.volt_data = omap44xx_vdd_iva_volt_data;
- omap4_vdd_core_info.volt_data = omap44xx_vdd_core_volt_data;
+ omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data;
+ omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data;
+ omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data;
- return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod,
- omap4_vdd_info,
- ARRAY_SIZE(omap4_vdd_info));
+ for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++)
+ voltdm->sys_clk.name = sys_clk_name;
+
+ voltdm_init(voltagedomains_omap4);
};
-core_initcall(omap44xx_voltage_early_init);
diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c
new file mode 100644
index 0000000..66bd700
--- /dev/null
+++ b/arch/arm/mach-omap2/vp.c
@@ -0,0 +1,278 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <plat/common.h>
+
+#include "voltage.h"
+#include "vp.h"
+#include "prm-regbits-34xx.h"
+#include "prm-regbits-44xx.h"
+#include "prm44xx.h"
+
+static u32 _vp_set_init_voltage(struct voltagedomain *voltdm, u32 volt)
+{
+ struct omap_vp_instance *vp = voltdm->vp;
+ u32 vpconfig;
+ char vsel;
+
+ vsel = voltdm->pmic->uv_to_vsel(volt);
+
+ vpconfig = voltdm->read(vp->vpconfig);
+ vpconfig &= ~(vp->common->vpconfig_initvoltage_mask |
+ vp->common->vpconfig_forceupdate |
+ vp->common->vpconfig_initvdd);
+ vpconfig |= vsel << __ffs(vp->common->vpconfig_initvoltage_mask);
+ voltdm->write(vpconfig, vp->vpconfig);
+
+ /* Trigger initVDD value copy to voltage processor */
+ voltdm->write((vpconfig | vp->common->vpconfig_initvdd),
+ vp->vpconfig);
+
+ /* Clear initVDD copy trigger bit */
+ voltdm->write(vpconfig, vp->vpconfig);
+
+ return vpconfig;
+}
+
+/* Generic voltage init functions */
+void __init omap_vp_init(struct voltagedomain *voltdm)
+{
+ struct omap_vp_instance *vp = voltdm->vp;
+ u32 val, sys_clk_rate, timeout, waittime;
+ u32 vddmin, vddmax, vstepmin, vstepmax;
+
+ if (!voltdm->read || !voltdm->write) {
+ pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ vp->enabled = false;
+
+ /* Divide to avoid overflow */
+ sys_clk_rate = voltdm->sys_clk.rate / 1000;
+
+ timeout = (sys_clk_rate * voltdm->pmic->vp_timeout_us) / 1000;
+ vddmin = voltdm->pmic->vp_vddmin;
+ vddmax = voltdm->pmic->vp_vddmax;
+
+ waittime = ((voltdm->pmic->step_size / voltdm->pmic->slew_rate) *
+ sys_clk_rate) / 1000;
+ vstepmin = voltdm->pmic->vp_vstepmin;
+ vstepmax = voltdm->pmic->vp_vstepmax;
+
+ /*
+ * VP_CONFIG: error gain is not set here, it will be updated
+ * on each scale, based on OPP.
+ */
+ val = (voltdm->pmic->vp_erroroffset <<
+ __ffs(voltdm->vp->common->vpconfig_erroroffset_mask)) |
+ vp->common->vpconfig_timeouten;
+ voltdm->write(val, vp->vpconfig);
+
+ /* VSTEPMIN */
+ val = (waittime << vp->common->vstepmin_smpswaittimemin_shift) |
+ (vstepmin << vp->common->vstepmin_stepmin_shift);
+ voltdm->write(val, vp->vstepmin);
+
+ /* VSTEPMAX */
+ val = (vstepmax << vp->common->vstepmax_stepmax_shift) |
+ (waittime << vp->common->vstepmax_smpswaittimemax_shift);
+ voltdm->write(val, vp->vstepmax);
+
+ /* VLIMITTO */
+ val = (vddmax << vp->common->vlimitto_vddmax_shift) |
+ (vddmin << vp->common->vlimitto_vddmin_shift) |
+ (timeout << vp->common->vlimitto_timeout_shift);
+ voltdm->write(val, vp->vlimitto);
+}
+
+int omap_vp_update_errorgain(struct voltagedomain *voltdm,
+ unsigned long target_volt)
+{
+ struct omap_volt_data *volt_data;
+
+ if (!voltdm->vp)
+ return -EINVAL;
+
+ /* Get volt_data corresponding to target_volt */
+ volt_data = omap_voltage_get_voltdata(voltdm, target_volt);
+ if (IS_ERR(volt_data))
+ return -EINVAL;
+
+ /* Setting vp errorgain based on the voltage */
+ voltdm->rmw(voltdm->vp->common->vpconfig_errorgain_mask,
+ volt_data->vp_errgain <<
+ __ffs(voltdm->vp->common->vpconfig_errorgain_mask),
+ voltdm->vp->vpconfig);
+
+ return 0;
+}
+
+/* VP force update method of voltage scaling */
+int omap_vp_forceupdate_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt)
+{
+ struct omap_vp_instance *vp = voltdm->vp;
+ u32 vpconfig;
+ u8 target_vsel, current_vsel;
+ int ret, timeout = 0;
+
+ ret = omap_vc_pre_scale(voltdm, target_volt, &target_vsel, ¤t_vsel);
+ if (ret)
+ return ret;
+
+ /*
+ * Clear all pending TransactionDone interrupt/status. Typical latency
+ * is <3us
+ */
+ while (timeout++ < VP_TRANXDONE_TIMEOUT) {
+ vp->common->ops->clear_txdone(vp->id);
+ if (!vp->common->ops->check_txdone(vp->id))
+ break;
+ udelay(1);
+ }
+ if (timeout >= VP_TRANXDONE_TIMEOUT) {
+ pr_warning("%s: vdd_%s TRANXDONE timeout exceeded."
+ "Voltage change aborted", __func__, voltdm->name);
+ return -ETIMEDOUT;
+ }
+
+ vpconfig = _vp_set_init_voltage(voltdm, target_volt);
+
+ /* Force update of voltage */
+ voltdm->write(vpconfig | vp->common->vpconfig_forceupdate,
+ voltdm->vp->vpconfig);
+
+ /*
+ * Wait for TransactionDone. Typical latency is <200us.
+ * Depends on SMPSWAITTIMEMIN/MAX and voltage change
+ */
+ timeout = 0;
+ omap_test_timeout(vp->common->ops->check_txdone(vp->id),
+ VP_TRANXDONE_TIMEOUT, timeout);
+ if (timeout >= VP_TRANXDONE_TIMEOUT)
+ pr_err("%s: vdd_%s TRANXDONE timeout exceeded."
+ "TRANXDONE never got set after the voltage update\n",
+ __func__, voltdm->name);
+
+ omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel);
+
+ /*
+ * Disable TransactionDone interrupt , clear all status, clear
+ * control registers
+ */
+ timeout = 0;
+ while (timeout++ < VP_TRANXDONE_TIMEOUT) {
+ vp->common->ops->clear_txdone(vp->id);
+ if (!vp->common->ops->check_txdone(vp->id))
+ break;
+ udelay(1);
+ }
+
+ if (timeout >= VP_TRANXDONE_TIMEOUT)
+ pr_warning("%s: vdd_%s TRANXDONE timeout exceeded while trying"
+ "to clear the TRANXDONE status\n",
+ __func__, voltdm->name);
+
+ /* Clear force bit */
+ voltdm->write(vpconfig, vp->vpconfig);
+
+ return 0;
+}
+
+/**
+ * omap_vp_enable() - API to enable a particular VP
+ * @voltdm: pointer to the VDD whose VP is to be enabled.
+ *
+ * This API enables a particular voltage processor. Needed by the smartreflex
+ * class drivers.
+ */
+void omap_vp_enable(struct voltagedomain *voltdm)
+{
+ struct omap_vp_instance *vp;
+ u32 vpconfig, volt;
+
+ if (!voltdm || IS_ERR(voltdm)) {
+ pr_warning("%s: VDD specified does not exist!\n", __func__);
+ return;
+ }
+
+ vp = voltdm->vp;
+ if (!voltdm->read || !voltdm->write) {
+ pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ /* If VP is already enabled, do nothing. Return */
+ if (vp->enabled)
+ return;
+
+ volt = voltdm_get_voltage(voltdm);
+ if (!volt) {
+ pr_warning("%s: unable to find current voltage for %s\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ vpconfig = _vp_set_init_voltage(voltdm, volt);
+
+ /* Enable VP */
+ vpconfig |= vp->common->vpconfig_vpenable;
+ voltdm->write(vpconfig, vp->vpconfig);
+
+ vp->enabled = true;
+}
+
+/**
+ * omap_vp_disable() - API to disable a particular VP
+ * @voltdm: pointer to the VDD whose VP is to be disabled.
+ *
+ * This API disables a particular voltage processor. Needed by the smartreflex
+ * class drivers.
+ */
+void omap_vp_disable(struct voltagedomain *voltdm)
+{
+ struct omap_vp_instance *vp;
+ u32 vpconfig;
+ int timeout;
+
+ if (!voltdm || IS_ERR(voltdm)) {
+ pr_warning("%s: VDD specified does not exist!\n", __func__);
+ return;
+ }
+
+ vp = voltdm->vp;
+ if (!voltdm->read || !voltdm->write) {
+ pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ /* If VP is already disabled, do nothing. Return */
+ if (!vp->enabled) {
+ pr_warning("%s: Trying to disable VP for vdd_%s when"
+ "it is already disabled\n", __func__, voltdm->name);
+ return;
+ }
+
+ /* Disable VP */
+ vpconfig = voltdm->read(vp->vpconfig);
+ vpconfig &= ~vp->common->vpconfig_vpenable;
+ voltdm->write(vpconfig, vp->vpconfig);
+
+ /*
+ * Wait for VP idle Typical latency is <2us. Maximum latency is ~100us
+ */
+ omap_test_timeout((voltdm->read(vp->vstatus)),
+ VP_IDLE_TIMEOUT, timeout);
+
+ if (timeout >= VP_IDLE_TIMEOUT)
+ pr_warning("%s: vdd_%s idle timedout\n",
+ __func__, voltdm->name);
+
+ vp->enabled = false;
+
+ return;
+}
diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h
index 7ce134f..7c155d2 100644
--- a/arch/arm/mach-omap2/vp.h
+++ b/arch/arm/mach-omap2/vp.h
@@ -19,44 +19,60 @@
#include <linux/kernel.h>
+struct voltagedomain;
+
+/*
+ * Voltage Processor (VP) identifiers
+ */
+#define OMAP3_VP_VDD_MPU_ID 0
+#define OMAP3_VP_VDD_CORE_ID 1
+#define OMAP4_VP_VDD_CORE_ID 0
+#define OMAP4_VP_VDD_IVA_ID 1
+#define OMAP4_VP_VDD_MPU_ID 2
+
/* XXX document */
#define VP_IDLE_TIMEOUT 200
#define VP_TRANXDONE_TIMEOUT 300
+/**
+ * struct omap_vp_ops - per-VP operations
+ * @check_txdone: check for VP transaction done
+ * @clear_txdone: clear VP transaction done status
+ */
+struct omap_vp_ops {
+ u32 (*check_txdone)(u8 vp_id);
+ void (*clear_txdone)(u8 vp_id);
+};
/**
- * struct omap_vp_common_data - register data common to all VDDs
+ * struct omap_vp_common - register data common to all VDDs
+ * @vpconfig_erroroffset_mask: ERROROFFSET bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_errorgain_mask: ERRORGAIN bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_initvoltage_mask: INITVOLTAGE bitmask in the PRM_VP*_CONFIG reg
- * @vpconfig_timeouten_mask: TIMEOUT bitmask in the PRM_VP*_CONFIG reg
+ * @vpconfig_timeouten: TIMEOUT bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_initvdd: INITVDD bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_forceupdate: FORCEUPDATE bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_vpenable: VPENABLE bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_erroroffset_shift: ERROROFFSET field shift in PRM_VP*_CONFIG reg
* @vpconfig_errorgain_shift: ERRORGAIN field shift in PRM_VP*_CONFIG reg
* @vpconfig_initvoltage_shift: INITVOLTAGE field shift in PRM_VP*_CONFIG reg
- * @vpconfig_stepmin_shift: VSTEPMIN field shift in the PRM_VP*_VSTEPMIN reg
- * @vpconfig_smpswaittimemin_shift: SMPSWAITTIMEMIN field shift in PRM_VP*_VSTEPMIN reg
- * @vpconfig_stepmax_shift: VSTEPMAX field shift in the PRM_VP*_VSTEPMAX reg
- * @vpconfig_smpswaittimemax_shift: SMPSWAITTIMEMAX field shift in PRM_VP*_VSTEPMAX reg
- * @vpconfig_vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg
- * @vpconfig_vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg
- * @vpconfig_vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg
- *
- * XXX It it not necessary to have both a mask and a shift for the same
- * bitfield - remove one
- * XXX Many of these fields are wrongly named -- e.g., vpconfig_smps* -- fix!
+ * @vstepmin_stepmin_shift: VSTEPMIN field shift in the PRM_VP*_VSTEPMIN reg
+ * @vstepmin_smpswaittimemin_shift: SMPSWAITTIMEMIN field shift in PRM_VP*_VSTEPMIN reg
+ * @vstepmax_stepmax_shift: VSTEPMAX field shift in the PRM_VP*_VSTEPMAX reg
+ * @vstepmax_smpswaittimemax_shift: SMPSWAITTIMEMAX field shift in PRM_VP*_VSTEPMAX reg
+ * @vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg
+ * @vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg
+ * @vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg
+ * @vpvoltage_mask: VPVOLTAGE field mask in PRM_VP*_VOLTAGE reg
*/
-struct omap_vp_common_data {
+struct omap_vp_common {
+ u32 vpconfig_erroroffset_mask;
u32 vpconfig_errorgain_mask;
u32 vpconfig_initvoltage_mask;
- u32 vpconfig_timeouten;
- u32 vpconfig_initvdd;
- u32 vpconfig_forceupdate;
- u32 vpconfig_vpenable;
- u8 vpconfig_erroroffset_shift;
- u8 vpconfig_errorgain_shift;
- u8 vpconfig_initvoltage_shift;
+ u8 vpconfig_timeouten;
+ u8 vpconfig_initvdd;
+ u8 vpconfig_forceupdate;
+ u8 vpconfig_vpenable;
u8 vstepmin_stepmin_shift;
u8 vstepmin_smpswaittimemin_shift;
u8 vstepmax_stepmax_shift;
@@ -64,80 +80,49 @@
u8 vlimitto_vddmin_shift;
u8 vlimitto_vddmax_shift;
u8 vlimitto_timeout_shift;
+ u8 vpvoltage_mask;
+
+ const struct omap_vp_ops *ops;
};
/**
- * struct omap_vp_prm_irqst_data - PRM_IRQSTATUS_MPU.VP_TRANXDONE_ST data
- * @prm_irqst_reg: reg offset for PRM_IRQSTATUS_MPU from top of PRM
- * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
- *
- * XXX prm_irqst_reg does not belong here
- * XXX Note that on OMAP3, VP_TRANXDONE interrupt may not work due to a
- * hardware bug
- * XXX This structure is probably not needed
- */
-struct omap_vp_prm_irqst_data {
- u8 prm_irqst_reg;
- u32 tranxdone_status;
-};
-
-/**
- * struct omap_vp_instance_data - VP register offsets (per-VDD)
- * @vp_common: pointer to struct omap_vp_common_data * for this SoC
- * @prm_irqst_data: pointer to struct omap_vp_prm_irqst_data for this VDD
+ * struct omap_vp_instance - VP register offsets (per-VDD)
+ * @common: pointer to struct omap_vp_common * for this SoC
* @vpconfig: PRM_VP*_CONFIG reg offset from PRM start
* @vstepmin: PRM_VP*_VSTEPMIN reg offset from PRM start
* @vlimitto: PRM_VP*_VLIMITTO reg offset from PRM start
* @vstatus: PRM_VP*_VSTATUS reg offset from PRM start
* @voltage: PRM_VP*_VOLTAGE reg offset from PRM start
+ * @id: Unique identifier for VP instance.
+ * @enabled: flag to keep track of whether vp is enabled or not
*
* XXX vp_common is probably not needed since it is per-SoC
*/
-struct omap_vp_instance_data {
- const struct omap_vp_common_data *vp_common;
- const struct omap_vp_prm_irqst_data *prm_irqst_data;
+struct omap_vp_instance {
+ const struct omap_vp_common *common;
u8 vpconfig;
u8 vstepmin;
u8 vstepmax;
u8 vlimitto;
u8 vstatus;
u8 voltage;
+ u8 id;
+ bool enabled;
};
-/**
- * struct omap_vp_runtime_data - VP data populated at runtime by code
- * @vpconfig_erroroffset: value of ERROROFFSET bitfield in PRM_VP*_CONFIG
- * @vpconfig_errorgain: value of ERRORGAIN bitfield in PRM_VP*_CONFIG
- * @vstepmin_smpswaittimemin: value of SMPSWAITTIMEMIN bitfield in PRM_VP*_VSTEPMIN
- * @vstepmax_smpswaittimemax: value of SMPSWAITTIMEMAX bitfield in PRM_VP*_VSTEPMAX
- * @vlimitto_timeout: value of TIMEOUT bitfield in PRM_VP*_VLIMITTO
- * @vstepmin_stepmin: value of VSTEPMIN bitfield in PRM_VP*_VSTEPMIN
- * @vstepmax_stepmax: value of VSTEPMAX bitfield in PRM_VP*_VSTEPMAX
- * @vlimitto_vddmin: value of VDDMIN bitfield in PRM_VP*_VLIMITTO
- * @vlimitto_vddmax: value of VDDMAX bitfield in PRM_VP*_VLIMITTO
- *
- * XXX Is this structure really needed? Why not just program the
- * device directly? They are in PRM space, therefore in the WKUP
- * powerdomain, so register contents should not be lost in off-mode.
- * XXX Some of these fields are incorrectly named, e.g., vstep*
- */
-struct omap_vp_runtime_data {
- u32 vpconfig_erroroffset;
- u16 vpconfig_errorgain;
- u16 vstepmin_smpswaittimemin;
- u16 vstepmax_smpswaittimemax;
- u16 vlimitto_timeout;
- u8 vstepmin_stepmin;
- u8 vstepmax_stepmax;
- u8 vlimitto_vddmin;
- u8 vlimitto_vddmax;
-};
+extern struct omap_vp_instance omap3_vp_mpu;
+extern struct omap_vp_instance omap3_vp_core;
-extern struct omap_vp_instance_data omap3_vp1_data;
-extern struct omap_vp_instance_data omap3_vp2_data;
+extern struct omap_vp_instance omap4_vp_mpu;
+extern struct omap_vp_instance omap4_vp_iva;
+extern struct omap_vp_instance omap4_vp_core;
-extern struct omap_vp_instance_data omap4_vp_mpu_data;
-extern struct omap_vp_instance_data omap4_vp_iva_data;
-extern struct omap_vp_instance_data omap4_vp_core_data;
+void omap_vp_init(struct voltagedomain *voltdm);
+void omap_vp_enable(struct voltagedomain *voltdm);
+void omap_vp_disable(struct voltagedomain *voltdm);
+int omap_vp_forceupdate_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt);
+int omap_vp_update_errorgain(struct voltagedomain *voltdm,
+ unsigned long target_volt);
#endif
diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c
index 6452170..260c554 100644
--- a/arch/arm/mach-omap2/vp3xxx_data.c
+++ b/arch/arm/mach-omap2/vp3xxx_data.c
@@ -25,16 +25,20 @@
#include "voltage.h"
#include "vp.h"
+#include "prm2xxx_3xxx.h"
+
+static const struct omap_vp_ops omap3_vp_ops = {
+ .check_txdone = omap3_prm_vp_check_txdone,
+ .clear_txdone = omap3_prm_vp_clear_txdone,
+};
/*
* VP data common to 34xx/36xx chips
* XXX This stuff presumably belongs in the vp3xxx.c or vp.c file.
*/
-static const struct omap_vp_common_data omap3_vp_common = {
- .vpconfig_erroroffset_shift = OMAP3430_ERROROFFSET_SHIFT,
+static const struct omap_vp_common omap3_vp_common = {
+ .vpconfig_erroroffset_mask = OMAP3430_ERROROFFSET_MASK,
.vpconfig_errorgain_mask = OMAP3430_ERRORGAIN_MASK,
- .vpconfig_errorgain_shift = OMAP3430_ERRORGAIN_SHIFT,
- .vpconfig_initvoltage_shift = OMAP3430_INITVOLTAGE_SHIFT,
.vpconfig_initvoltage_mask = OMAP3430_INITVOLTAGE_MASK,
.vpconfig_timeouten = OMAP3430_TIMEOUTEN_MASK,
.vpconfig_initvdd = OMAP3430_INITVDD_MASK,
@@ -47,36 +51,29 @@
.vlimitto_vddmin_shift = OMAP3430_VDDMIN_SHIFT,
.vlimitto_vddmax_shift = OMAP3430_VDDMAX_SHIFT,
.vlimitto_timeout_shift = OMAP3430_TIMEOUT_SHIFT,
+ .vpvoltage_mask = OMAP3430_VPVOLTAGE_MASK,
+
+ .ops = &omap3_vp_ops,
};
-static const struct omap_vp_prm_irqst_data omap3_vp1_prm_irqst_data = {
- .prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
- .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK,
-};
-
-struct omap_vp_instance_data omap3_vp1_data = {
- .vp_common = &omap3_vp_common,
+struct omap_vp_instance omap3_vp_mpu = {
+ .id = OMAP3_VP_VDD_MPU_ID,
+ .common = &omap3_vp_common,
.vpconfig = OMAP3_PRM_VP1_CONFIG_OFFSET,
.vstepmin = OMAP3_PRM_VP1_VSTEPMIN_OFFSET,
.vstepmax = OMAP3_PRM_VP1_VSTEPMAX_OFFSET,
.vlimitto = OMAP3_PRM_VP1_VLIMITTO_OFFSET,
.vstatus = OMAP3_PRM_VP1_STATUS_OFFSET,
.voltage = OMAP3_PRM_VP1_VOLTAGE_OFFSET,
- .prm_irqst_data = &omap3_vp1_prm_irqst_data,
};
-static const struct omap_vp_prm_irqst_data omap3_vp2_prm_irqst_data = {
- .prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
- .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK,
-};
-
-struct omap_vp_instance_data omap3_vp2_data = {
- .vp_common = &omap3_vp_common,
+struct omap_vp_instance omap3_vp_core = {
+ .id = OMAP3_VP_VDD_CORE_ID,
+ .common = &omap3_vp_common,
.vpconfig = OMAP3_PRM_VP2_CONFIG_OFFSET,
.vstepmin = OMAP3_PRM_VP2_VSTEPMIN_OFFSET,
.vstepmax = OMAP3_PRM_VP2_VSTEPMAX_OFFSET,
.vlimitto = OMAP3_PRM_VP2_VLIMITTO_OFFSET,
.vstatus = OMAP3_PRM_VP2_STATUS_OFFSET,
.voltage = OMAP3_PRM_VP2_VOLTAGE_OFFSET,
- .prm_irqst_data = &omap3_vp2_prm_irqst_data,
};
diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c
index 65d1ad6..b4e7704 100644
--- a/arch/arm/mach-omap2/vp44xx_data.c
+++ b/arch/arm/mach-omap2/vp44xx_data.c
@@ -27,15 +27,18 @@
#include "vp.h"
+static const struct omap_vp_ops omap4_vp_ops = {
+ .check_txdone = omap4_prm_vp_check_txdone,
+ .clear_txdone = omap4_prm_vp_clear_txdone,
+};
+
/*
* VP data common to 44xx chips
* XXX This stuff presumably belongs in the vp44xx.c or vp.c file.
*/
-static const struct omap_vp_common_data omap4_vp_common = {
- .vpconfig_erroroffset_shift = OMAP4430_ERROROFFSET_SHIFT,
+static const struct omap_vp_common omap4_vp_common = {
+ .vpconfig_erroroffset_mask = OMAP4430_ERROROFFSET_MASK,
.vpconfig_errorgain_mask = OMAP4430_ERRORGAIN_MASK,
- .vpconfig_errorgain_shift = OMAP4430_ERRORGAIN_SHIFT,
- .vpconfig_initvoltage_shift = OMAP4430_INITVOLTAGE_SHIFT,
.vpconfig_initvoltage_mask = OMAP4430_INITVOLTAGE_MASK,
.vpconfig_timeouten = OMAP4430_TIMEOUTEN_MASK,
.vpconfig_initvdd = OMAP4430_INITVDD_MASK,
@@ -48,53 +51,39 @@
.vlimitto_vddmin_shift = OMAP4430_VDDMIN_SHIFT,
.vlimitto_vddmax_shift = OMAP4430_VDDMAX_SHIFT,
.vlimitto_timeout_shift = OMAP4430_TIMEOUT_SHIFT,
+ .vpvoltage_mask = OMAP4430_VPVOLTAGE_MASK,
+ .ops = &omap4_vp_ops,
};
-static const struct omap_vp_prm_irqst_data omap4_vp_mpu_prm_irqst_data = {
- .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET,
- .tranxdone_status = OMAP4430_VP_MPU_TRANXDONE_ST_MASK,
-};
-
-struct omap_vp_instance_data omap4_vp_mpu_data = {
- .vp_common = &omap4_vp_common,
+struct omap_vp_instance omap4_vp_mpu = {
+ .id = OMAP4_VP_VDD_MPU_ID,
+ .common = &omap4_vp_common,
.vpconfig = OMAP4_PRM_VP_MPU_CONFIG_OFFSET,
.vstepmin = OMAP4_PRM_VP_MPU_VSTEPMIN_OFFSET,
.vstepmax = OMAP4_PRM_VP_MPU_VSTEPMAX_OFFSET,
.vlimitto = OMAP4_PRM_VP_MPU_VLIMITTO_OFFSET,
.vstatus = OMAP4_PRM_VP_MPU_STATUS_OFFSET,
.voltage = OMAP4_PRM_VP_MPU_VOLTAGE_OFFSET,
- .prm_irqst_data = &omap4_vp_mpu_prm_irqst_data,
};
-static const struct omap_vp_prm_irqst_data omap4_vp_iva_prm_irqst_data = {
- .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
- .tranxdone_status = OMAP4430_VP_IVA_TRANXDONE_ST_MASK,
-};
-
-struct omap_vp_instance_data omap4_vp_iva_data = {
- .vp_common = &omap4_vp_common,
+struct omap_vp_instance omap4_vp_iva = {
+ .id = OMAP4_VP_VDD_IVA_ID,
+ .common = &omap4_vp_common,
.vpconfig = OMAP4_PRM_VP_IVA_CONFIG_OFFSET,
.vstepmin = OMAP4_PRM_VP_IVA_VSTEPMIN_OFFSET,
.vstepmax = OMAP4_PRM_VP_IVA_VSTEPMAX_OFFSET,
.vlimitto = OMAP4_PRM_VP_IVA_VLIMITTO_OFFSET,
.vstatus = OMAP4_PRM_VP_IVA_STATUS_OFFSET,
.voltage = OMAP4_PRM_VP_IVA_VOLTAGE_OFFSET,
- .prm_irqst_data = &omap4_vp_iva_prm_irqst_data,
};
-static const struct omap_vp_prm_irqst_data omap4_vp_core_prm_irqst_data = {
- .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
- .tranxdone_status = OMAP4430_VP_CORE_TRANXDONE_ST_MASK,
-};
-
-struct omap_vp_instance_data omap4_vp_core_data = {
- .vp_common = &omap4_vp_common,
+struct omap_vp_instance omap4_vp_core = {
+ .id = OMAP4_VP_VDD_CORE_ID,
+ .common = &omap4_vp_common,
.vpconfig = OMAP4_PRM_VP_CORE_CONFIG_OFFSET,
.vstepmin = OMAP4_PRM_VP_CORE_VSTEPMIN_OFFSET,
.vstepmax = OMAP4_PRM_VP_CORE_VSTEPMAX_OFFSET,
.vlimitto = OMAP4_PRM_VP_CORE_VLIMITTO_OFFSET,
.vstatus = OMAP4_PRM_VP_CORE_STATUS_OFFSET,
.voltage = OMAP4_PRM_VP_CORE_VOLTAGE_OFFSET,
- .prm_irqst_data = &omap4_vp_core_prm_irqst_data,
};
-
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 88432ab..4b79a80 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -9,7 +9,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -21,7 +21,6 @@
#include <linux/mv643xx_eth.h>
#include <linux/i2c.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 9e5c166..343f60e 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -13,7 +13,7 @@
* License, or (at your option) any later version.
*
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -30,7 +30,6 @@
#include <linux/phy.h>
#include <linux/marvell_phy.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index 43cf8bc..b1b45ff 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -9,12 +9,11 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <asm/gpio.h>
#include <mach/bridge-regs.h>
#include <plat/irq.h>
#include "common.h"
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 9115511..d3cd3f6 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -7,7 +7,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -21,7 +21,6 @@
#include <linux/serial_reg.h>
#include <linux/ata_platform.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index b3356ad..201ae36 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -7,7 +7,7 @@
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -20,7 +20,6 @@
#include <linux/i2c.h>
#include <linux/ata_platform.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <mach/orion5x.h>
#include "common.h"
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 8c87666..ebd6767 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -7,7 +7,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -18,7 +18,6 @@
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 994644f..05db2d3 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -7,7 +7,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -19,7 +19,6 @@
#include <linux/i2c.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 1903d25..e47fa05 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -9,7 +9,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -20,7 +20,6 @@
#include <linux/ata_platform.h>
#include <linux/i2c.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index e06fdae..6431725 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -7,7 +7,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -21,7 +21,6 @@
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 3061832..29f1526 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -8,7 +8,7 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -20,7 +20,6 @@
#include <linux/i2c.h>
#include <linux/serial_reg.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 3dbcd5e..31e51f9 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -8,7 +8,7 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -23,7 +23,6 @@
#include <linux/serial_reg.h>
#include <linux/ata_platform.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 23c9e2e..0fbcc14 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -11,7 +11,7 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -25,7 +25,6 @@
#include <linux/i2c.h>
#include <linux/serial_reg.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 1c63a76..b8be7d8 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -5,7 +5,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -17,7 +17,6 @@
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 4fd9f18..faf81a0 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -5,7 +5,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -20,7 +20,6 @@
#include <linux/input.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-picoxcell/Makefile b/arch/arm/mach-picoxcell/Makefile
new file mode 100644
index 0000000..c550b63
--- /dev/null
+++ b/arch/arm/mach-picoxcell/Makefile
@@ -0,0 +1,3 @@
+obj-y := common.o
+obj-y += time.o
+obj-y += io.o
diff --git a/arch/arm/mach-picoxcell/Makefile.boot b/arch/arm/mach-picoxcell/Makefile.boot
new file mode 100644
index 0000000..b327175
--- /dev/null
+++ b/arch/arm/mach-picoxcell/Makefile.boot
@@ -0,0 +1 @@
+zreladdr-y := 0x00008000
diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c
new file mode 100644
index 0000000..34d0834
--- /dev/null
+++ b/arch/arm/mach-picoxcell/common.c
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@picochip.com
+ */
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <mach/picoxcell_soc.h>
+
+#include "common.h"
+
+static void __init picoxcell_init_machine(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *picoxcell_dt_match[] = {
+ "picochip,pc3x2",
+ "picochip,pc3x3",
+ NULL
+};
+
+static const struct of_device_id vic_of_match[] __initconst = {
+ { .compatible = "arm,pl192-vic" },
+ { /* Sentinel */ }
+};
+
+static void __init picoxcell_init_irq(void)
+{
+ vic_init(IO_ADDRESS(PICOXCELL_VIC0_BASE), 0, ~0, 0);
+ vic_init(IO_ADDRESS(PICOXCELL_VIC1_BASE), 32, ~0, 0);
+ irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC0_BASE, 0);
+ irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC1_BASE, 32);
+}
+
+DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
+ .map_io = picoxcell_map_io,
+ .nr_irqs = ARCH_NR_IRQS,
+ .init_irq = picoxcell_init_irq,
+ .timer = &picoxcell_timer,
+ .init_machine = picoxcell_init_machine,
+ .dt_compat = picoxcell_dt_match,
+MACHINE_END
diff --git a/arch/arm/mach-picoxcell/common.h b/arch/arm/mach-picoxcell/common.h
new file mode 100644
index 0000000..5263f0f
--- /dev/null
+++ b/arch/arm/mach-picoxcell/common.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@picochip.com
+ */
+#ifndef __PICOXCELL_COMMON_H__
+#define __PICOXCELL_COMMON_H__
+
+#include <asm/mach/time.h>
+
+extern struct sys_timer picoxcell_timer;
+extern void picoxcell_map_io(void);
+
+#endif /* __PICOXCELL_COMMON_H__ */
diff --git a/arch/arm/mach-picoxcell/include/mach/debug-macro.S b/arch/arm/mach-picoxcell/include/mach/debug-macro.S
new file mode 100644
index 0000000..8f2c234
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/debug-macro.S
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit
+ * accesses to the 8250.
+ */
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#define UART_SHIFT 2
+
+ .macro addruart, rp, rv
+ ldr \rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)
+ ldr \rp, =PICOXCELL_UART1_BASE
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #UART_TX << UART_SHIFT]
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT]
+ and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ bne 1002b
+ .endm
+
+ /* The UART's don't have any flow control IO's wired up. */
+ .macro waituart,rd,rx
+ .endm
diff --git a/arch/arm/mach-picoxcell/include/mach/entry-macro.S b/arch/arm/mach-picoxcell/include/mach/entry-macro.S
new file mode 100644
index 0000000..a6b09f7
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/entry-macro.S
@@ -0,0 +1,19 @@
+/*
+ * entry-macro.S
+ *
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * Low-level IRQ helper macros for picoXcell platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#define VA_VIC0 IO_ADDRESS(PICOXCELL_VIC0_BASE)
+#define VA_VIC1 IO_ADDRESS(PICOXCELL_VIC1_BASE)
+
+#include <asm/entry-macro-vic2.S>
diff --git a/arch/arm/mach-picoxcell/include/mach/gpio.h b/arch/arm/mach-picoxcell/include/mach/gpio.h
new file mode 100644
index 0000000..40a8c17
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/gpio.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-picoxcell/include/mach/hardware.h b/arch/arm/mach-picoxcell/include/mach/hardware.h
new file mode 100644
index 0000000..70ff581
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This file contains the hardware definitions of the picoXcell SoC devices.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <mach/picoxcell_soc.h>
+
+#endif
diff --git a/arch/arm/mach-picoxcell/include/mach/io.h b/arch/arm/mach-picoxcell/include/mach/io.h
new file mode 100644
index 0000000..7573ec7
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No ioports, but needed for driver compatibility. */
+#define __io(a) __typesafe_io(a)
+/* No PCI possible on picoxcell. */
+#define __mem_pci(a) (a)
+
+#endif /* __ASM_ARM_ARCH_IO_H */
diff --git a/arch/arm/mach-picoxcell/include/mach/irqs.h b/arch/arm/mach-picoxcell/include/mach/irqs.h
new file mode 100644
index 0000000..4d13ed9
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/irqs.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This file contains the hardware definitions of the picoXcell SoC devices.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define ARCH_NR_IRQS 64
+#define NR_IRQS (128 + ARCH_NR_IRQS)
+
+#define IRQ_VIC0_BASE 0
+#define IRQ_VIC1_BASE 32
+
+#endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-picoxcell/include/mach/map.h b/arch/arm/mach-picoxcell/include/mach/map.h
new file mode 100644
index 0000000..c06afad
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/map.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __PICOXCELL_MAP_H__
+#define __PICOXCELL_MAP_H__
+
+#define PHYS_TO_IO(x) (((x) & 0x00ffffff) | 0xfe000000)
+
+#ifdef __ASSEMBLY__
+#define IO_ADDRESS(x) PHYS_TO_IO((x))
+#else
+#define IO_ADDRESS(x) (void __iomem __force *)(PHYS_TO_IO((x)))
+#endif
+
+#endif /* __PICOXCELL_MAP_H__ */
diff --git a/arch/arm/mach-picoxcell/include/mach/memory.h b/arch/arm/mach-picoxcell/include/mach/memory.h
new file mode 100644
index 0000000..40a8c17
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/memory.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h b/arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h
new file mode 100644
index 0000000..5566fc8
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This file contains the hardware definitions of the picoXcell SoC devices.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __PICOXCELL_SOC_H__
+#define __PICOXCELL_SOC_H__
+
+#define PICOXCELL_UART1_BASE 0x80230000
+#define PICOXCELL_PERIPH_BASE 0x80000000
+#define PICOXCELL_PERIPH_LENGTH SZ_4M
+#define PICOXCELL_VIC0_BASE 0x80060000
+#define PICOXCELL_VIC1_BASE 0x80064000
+
+#endif /* __PICOXCELL_SOC_H__ */
diff --git a/arch/arm/mach-picoxcell/include/mach/system.h b/arch/arm/mach-picoxcell/include/mach/system.h
new file mode 100644
index 0000000..67c589b
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/system.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+ /*
+ * This should do all the clock switching and wait for interrupt
+ * tricks.
+ */
+ cpu_do_idle();
+}
+
+static inline void arch_reset(int mode, const char *cmd)
+{
+ /* Watchdog reset to go here. */
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-picoxcell/include/mach/timex.h b/arch/arm/mach-picoxcell/include/mach/timex.h
new file mode 100644
index 0000000..6c540a6
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/timex.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __TIMEX_H__
+#define __TIMEX_H__
+
+/* Bogus value to allow the kernel to compile. */
+#define CLOCK_TICK_RATE 1000000
+
+#endif /* __TIMEX_H__ */
+
diff --git a/arch/arm/mach-picoxcell/include/mach/uncompress.h b/arch/arm/mach-picoxcell/include/mach/uncompress.h
new file mode 100644
index 0000000..b60b19d
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/uncompress.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define putc(c)
+#define flush()
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-picoxcell/include/mach/vmalloc.h b/arch/arm/mach-picoxcell/include/mach/vmalloc.h
new file mode 100644
index 0000000..0216cc4
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/vmalloc.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#define VMALLOC_END 0xfe000000UL
diff --git a/arch/arm/mach-picoxcell/io.c b/arch/arm/mach-picoxcell/io.c
new file mode 100644
index 0000000..39e9b9e
--- /dev/null
+++ b/arch/arm/mach-picoxcell/io.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@picochip.com
+ */
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+#include <mach/picoxcell_soc.h>
+
+#include "common.h"
+
+void __init picoxcell_map_io(void)
+{
+ struct map_desc io_map = {
+ .virtual = PHYS_TO_IO(PICOXCELL_PERIPH_BASE),
+ .pfn = __phys_to_pfn(PICOXCELL_PERIPH_BASE),
+ .length = PICOXCELL_PERIPH_LENGTH,
+ .type = MT_DEVICE,
+ };
+
+ iotable_init(&io_map, 1);
+}
diff --git a/arch/arm/mach-picoxcell/time.c b/arch/arm/mach-picoxcell/time.c
new file mode 100644
index 0000000..90a554f
--- /dev/null
+++ b/arch/arm/mach-picoxcell/time.c
@@ -0,0 +1,132 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@picochip.com
+ */
+#include <linux/dw_apb_timer.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched.h>
+
+#include <asm/mach/time.h>
+#include <asm/sched_clock.h>
+
+#include "common.h"
+
+static void timer_get_base_and_rate(struct device_node *np,
+ void __iomem **base, u32 *rate)
+{
+ *base = of_iomap(np, 0);
+
+ if (!*base)
+ panic("Unable to map regs for %s", np->name);
+
+ if (of_property_read_u32(np, "clock-freq", rate))
+ panic("No clock-freq property for %s", np->name);
+}
+
+static void picoxcell_add_clockevent(struct device_node *event_timer)
+{
+ void __iomem *iobase;
+ struct dw_apb_clock_event_device *ced;
+ u32 irq, rate;
+
+ irq = irq_of_parse_and_map(event_timer, 0);
+ if (irq == NO_IRQ)
+ panic("No IRQ for clock event timer");
+
+ timer_get_base_and_rate(event_timer, &iobase, &rate);
+
+ ced = dw_apb_clockevent_init(0, event_timer->name, 300, iobase, irq,
+ rate);
+ if (!ced)
+ panic("Unable to initialise clockevent device");
+
+ dw_apb_clockevent_register(ced);
+}
+
+static void picoxcell_add_clocksource(struct device_node *source_timer)
+{
+ void __iomem *iobase;
+ struct dw_apb_clocksource *cs;
+ u32 rate;
+
+ timer_get_base_and_rate(source_timer, &iobase, &rate);
+
+ cs = dw_apb_clocksource_init(300, source_timer->name, iobase, rate);
+ if (!cs)
+ panic("Unable to initialise clocksource device");
+
+ dw_apb_clocksource_start(cs);
+ dw_apb_clocksource_register(cs);
+}
+
+static DEFINE_CLOCK_DATA(cd);
+static void __iomem *sched_io_base;
+
+unsigned long long notrace sched_clock(void)
+{
+ cycle_t cyc = sched_io_base ? __raw_readl(sched_io_base) : 0;
+
+ return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static void notrace picoxcell_update_sched_clock(void)
+{
+ cycle_t cyc = sched_io_base ? __raw_readl(sched_io_base) : 0;
+
+ update_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static const struct of_device_id picoxcell_rtc_ids[] __initconst = {
+ { .compatible = "picochip,pc3x2-rtc" },
+ { /* Sentinel */ },
+};
+
+static void picoxcell_init_sched_clock(void)
+{
+ struct device_node *sched_timer;
+ u32 rate;
+
+ sched_timer = of_find_matching_node(NULL, picoxcell_rtc_ids);
+ if (!sched_timer)
+ panic("No RTC for sched clock to use");
+
+ timer_get_base_and_rate(sched_timer, &sched_io_base, &rate);
+ of_node_put(sched_timer);
+
+ init_sched_clock(&cd, picoxcell_update_sched_clock, 32, rate);
+}
+
+static const struct of_device_id picoxcell_timer_ids[] __initconst = {
+ { .compatible = "picochip,pc3x2-timer" },
+ {},
+};
+
+static void __init picoxcell_timer_init(void)
+{
+ struct device_node *event_timer, *source_timer;
+
+ event_timer = of_find_matching_node(NULL, picoxcell_timer_ids);
+ if (!event_timer)
+ panic("No timer for clockevent");
+ picoxcell_add_clockevent(event_timer);
+
+ source_timer = of_find_matching_node(event_timer, picoxcell_timer_ids);
+ if (!source_timer)
+ panic("No timer for clocksource");
+ picoxcell_add_clocksource(source_timer);
+
+ of_node_put(source_timer);
+
+ picoxcell_init_sched_clock();
+}
+
+struct sys_timer picoxcell_timer = {
+ .init = picoxcell_timer_init,
+};
diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c
index f219914..d3e71d3 100644
--- a/arch/arm/mach-pnx4008/gpio.c
+++ b/arch/arm/mach-pnx4008/gpio.c
@@ -13,14 +13,13 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
-
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/platform.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pnx4008.h>
/* register definitions */
#define PIO_VA_BASE IO_ADDRESS(PNX4008_PIO_BASE)
diff --git a/arch/arm/mach-pnx4008/include/mach/gpio.h b/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
similarity index 98%
rename from arch/arm/mach-pnx4008/include/mach/gpio.h
rename to arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
index 9591467..41027dd 100644
--- a/arch/arm/mach-pnx4008/include/mach/gpio.h
+++ b/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
@@ -1,5 +1,5 @@
/*
- * arch/arm/mach-pnx4008/include/mach/gpio.h
+ * arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
*
* PNX4008 GPIO driver - header file
*
diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c
index f40961e..374c138 100644
--- a/arch/arm/mach-pnx4008/serial.c
+++ b/arch/arm/mach-pnx4008/serial.c
@@ -9,7 +9,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/io.h>
@@ -19,8 +18,8 @@
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pnx4008.h>
#include <mach/clock.h>
#define UART_3 0
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
index 93f59f8..be75147 100644
--- a/arch/arm/mach-pxa/cm-x255.c
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -11,7 +11,6 @@
#include <linux/platform_device.h>
#include <linux/irq.h>
-#include <linux/gpio.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/nand-gpio.h>
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index f5d91ef..5432ecb 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -16,6 +16,7 @@
* initialization stuff for PXA machines which can be overridden later if
* need be.
*/
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -26,7 +27,6 @@
#include <asm/mach-types.h>
#include <mach/reset.h>
-#include <mach/gpio.h>
#include <mach/smemc.h>
#include <mach/pxa3xx-regs.h>
diff --git a/arch/arm/mach-pxa/include/mach/gpio-pxa.h b/arch/arm/mach-pxa/include/mach/gpio-pxa.h
new file mode 100644
index 0000000..41b4c93
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/gpio-pxa.h
@@ -0,0 +1,133 @@
+/*
+ * Written by Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef __MACH_PXA_GPIO_PXA_H
+#define __MACH_PXA_GPIO_PXA_H
+
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+
+#define GPIO_REGS_VIRT io_p2v(0x40E00000)
+
+#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
+
+/* GPIO Pin Level Registers */
+#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00)
+#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00)
+#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00)
+#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00)
+
+/* GPIO Pin Direction Registers */
+#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c)
+#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c)
+#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c)
+#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c)
+
+/* GPIO Pin Output Set Registers */
+#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18)
+#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18)
+#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18)
+#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18)
+
+/* GPIO Pin Output Clear Registers */
+#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24)
+#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24)
+#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24)
+#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24)
+
+/* GPIO Rising Edge Detect Registers */
+#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30)
+#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30)
+#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30)
+#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30)
+
+/* GPIO Falling Edge Detect Registers */
+#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c)
+#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c)
+#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c)
+#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c)
+
+/* GPIO Edge Detect Status Registers */
+#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48)
+#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48)
+#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48)
+#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48)
+
+/* GPIO Alternate Function Select Registers */
+#define GAFR0_L GPIO_REG(0x0054)
+#define GAFR0_U GPIO_REG(0x0058)
+#define GAFR1_L GPIO_REG(0x005C)
+#define GAFR1_U GPIO_REG(0x0060)
+#define GAFR2_L GPIO_REG(0x0064)
+#define GAFR2_U GPIO_REG(0x0068)
+#define GAFR3_L GPIO_REG(0x006C)
+#define GAFR3_U GPIO_REG(0x0070)
+
+/* More handy macros. The argument is a literal GPIO number. */
+
+#define GPIO_bit(x) (1 << ((x) & 0x1f))
+
+#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00)
+#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c)
+#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18)
+#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24)
+#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30)
+#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c)
+#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48)
+#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2))
+
+
+#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM
+
+#define gpio_to_bank(gpio) ((gpio) >> 5)
+
+#ifdef CONFIG_CPU_PXA26x
+/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
+ * as well as their Alternate Function value being '1' for GPIO in GAFRx.
+ */
+static inline int __gpio_is_inverted(unsigned gpio)
+{
+ return cpu_is_pxa25x() && gpio > 85;
+}
+#else
+static inline int __gpio_is_inverted(unsigned gpio) { return 0; }
+#endif
+
+/*
+ * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
+ * function of a GPIO, and GPDRx cannot be altered once configured. It
+ * is attributed as "occupied" here (I know this terminology isn't
+ * accurate, you are welcome to propose a better one :-)
+ */
+static inline int __gpio_is_occupied(unsigned gpio)
+{
+ if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
+ int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
+ int dir = GPDR(gpio) & GPIO_bit(gpio);
+
+ if (__gpio_is_inverted(gpio))
+ return af != 1 || dir == 0;
+ else
+ return af != 0 || dir != 0;
+ } else
+ return GPDR(gpio) & GPIO_bit(gpio);
+}
+
+#include <plat/gpio-pxa.h>
+#endif /* __MACH_PXA_GPIO_PXA_H */
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index c463950..004cade 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -24,84 +24,10 @@
#ifndef __ASM_ARCH_PXA_GPIO_H
#define __ASM_ARCH_PXA_GPIO_H
-#include <mach/irqs.h>
-#include <mach/hardware.h>
#include <asm-generic/gpio.h>
+/* The defines for the driver are needed for the accelerated accessors */
+#include "gpio-pxa.h"
-#define GPIO_REGS_VIRT io_p2v(0x40E00000)
-
-#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
-
-/* GPIO Pin Level Registers */
-#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00)
-#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00)
-#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00)
-#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00)
-
-/* GPIO Pin Direction Registers */
-#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c)
-#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c)
-#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c)
-#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c)
-
-/* GPIO Pin Output Set Registers */
-#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18)
-#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18)
-#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18)
-#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18)
-
-/* GPIO Pin Output Clear Registers */
-#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24)
-#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24)
-#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24)
-#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24)
-
-/* GPIO Rising Edge Detect Registers */
-#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30)
-#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30)
-#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30)
-#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30)
-
-/* GPIO Falling Edge Detect Registers */
-#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c)
-#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c)
-#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c)
-#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c)
-
-/* GPIO Edge Detect Status Registers */
-#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48)
-#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48)
-#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48)
-#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48)
-
-/* GPIO Alternate Function Select Registers */
-#define GAFR0_L GPIO_REG(0x0054)
-#define GAFR0_U GPIO_REG(0x0058)
-#define GAFR1_L GPIO_REG(0x005C)
-#define GAFR1_U GPIO_REG(0x0060)
-#define GAFR2_L GPIO_REG(0x0064)
-#define GAFR2_U GPIO_REG(0x0068)
-#define GAFR3_L GPIO_REG(0x006C)
-#define GAFR3_U GPIO_REG(0x0070)
-
-/* More handy macros. The argument is a literal GPIO number. */
-
-#define GPIO_bit(x) (1 << ((x) & 0x1f))
-
-#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00)
-#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c)
-#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18)
-#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24)
-#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30)
-#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c)
-#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48)
-#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2))
-
-
-#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM
-
-#define gpio_to_bank(gpio) ((gpio) >> 5)
#define gpio_to_irq(gpio) IRQ_GPIO(gpio)
static inline int irq_to_gpio(unsigned int irq)
@@ -118,37 +44,5 @@
return -1;
}
-#ifdef CONFIG_CPU_PXA26x
-/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
- * as well as their Alternate Function value being '1' for GPIO in GAFRx.
- */
-static inline int __gpio_is_inverted(unsigned gpio)
-{
- return cpu_is_pxa25x() && gpio > 85;
-}
-#else
-static inline int __gpio_is_inverted(unsigned gpio) { return 0; }
-#endif
-
-/*
- * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
- * function of a GPIO, and GPDRx cannot be altered once configured. It
- * is attributed as "occupied" here (I know this terminology isn't
- * accurate, you are welcome to propose a better one :-)
- */
-static inline int __gpio_is_occupied(unsigned gpio)
-{
- if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
- int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
- int dir = GPDR(gpio) & GPIO_bit(gpio);
-
- if (__gpio_is_inverted(gpio))
- return af != 1 || dir == 0;
- else
- return af != 0 || dir != 0;
- } else
- return GPDR(gpio) & GPIO_bit(gpio);
-}
-
#include <plat/gpio.h>
#endif
diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
index 2a5726c..b6238cb 100644
--- a/arch/arm/mach-pxa/include/mach/littleton.h
+++ b/arch/arm/mach-pxa/include/mach/littleton.h
@@ -1,7 +1,7 @@
#ifndef __ASM_ARCH_LITTLETON_H
#define __ASM_ARCH_LITTLETON_H
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#define LITTLETON_ETH_PHYS 0x30000000
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index ca60757..8d9200f 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -11,7 +11,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
@@ -23,7 +22,7 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 16df0fc..64540d9 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -12,7 +12,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/syscore_ops.h>
@@ -39,7 +39,6 @@
#include <asm/mach/flash.h>
#include <mach/pxa27x.h>
-#include <mach/gpio.h>
#include <mach/lpd270.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index a8c696b..c48ce6d 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -11,6 +11,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -42,7 +43,6 @@
#include <asm/hardware/sa1111.h>
#include <mach/pxa25x.h>
-#include <mach/gpio.h>
#include <mach/audio.h>
#include <mach/lubbock.h>
#include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index cc6e14f..0567d39 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -12,7 +12,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/syscore_ops.h>
@@ -43,7 +43,6 @@
#include <asm/mach/flash.h>
#include <mach/pxa27x.h>
-#include <mach/gpio.h>
#include <mach/mainstone.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index b27544b..43a5f68 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -12,15 +12,15 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/syscore_ops.h>
-#include <mach/gpio.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa2xx.h>
+#include <mach/gpio-pxa.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 6d5b7e0..9a9c539 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -19,7 +19,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
@@ -28,7 +28,6 @@
#include <media/soc_camera.h>
-#include <asm/gpio.h>
#include <mach/camera.h>
#include <asm/mach/map.h>
#include <mach/pxa27x.h>
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 9c434d2..8746e10 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -16,6 +16,7 @@
* initialization stuff for PXA machines which can be overridden later if
* need be.
*/
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -23,12 +24,12 @@
#include <linux/suspend.h>
#include <linux/syscore_ops.h>
#include <linux/irq.h>
+#include <linux/gpio.h>
#include <asm/mach/map.h>
#include <asm/suspend.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
#include <mach/pxa25x.h>
#include <mach/reset.h>
#include <mach/pm.h>
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 9d2400b..2bb5cf8 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -11,6 +11,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -20,13 +21,13 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/i2c/pxa-i2c.h>
+#include <linux/gpio.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/suspend.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
#include <mach/pxa27x.h>
#include <mach/reset.h>
#include <mach/ohci.h>
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index b5cd9e5..f940a13 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -12,7 +12,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -26,7 +25,7 @@
#include <asm/mach/map.h>
#include <asm/suspend.h>
#include <mach/hardware.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#include <mach/pxa3xx-regs.h>
#include <mach/reset.h>
#include <mach/ohci.h>
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
index 0ee166b..51371b3 100644
--- a/arch/arm/mach-pxa/pxa95x.c
+++ b/arch/arm/mach-pxa/pxa95x.c
@@ -9,7 +9,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -21,7 +20,7 @@
#include <linux/syscore_ops.h>
#include <mach/hardware.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#include <mach/pxa3xx-regs.h>
#include <mach/pxa930.h>
#include <mach/reset.h>
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index 5ce3403..3c988b6f 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -9,12 +9,13 @@
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/mfd/88pm860x.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -23,7 +24,6 @@
#include <mach/hardware.h>
#include <mach/mfp.h>
#include <mach/mfp-pxa930.h>
-#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-realview/include/mach/gpio.h b/arch/arm/mach-realview/include/mach/gpio.h
index 94ff276..40a8c17 100644
--- a/arch/arm/mach-realview/include/mach/gpio.h
+++ b/arch/arm/mach-realview/include/mach/gpio.h
@@ -1,6 +1 @@
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
+/* empty */
diff --git a/arch/arm/mach-rpc/include/mach/hardware.h b/arch/arm/mach-rpc/include/mach/hardware.h
index dde6b3c..050d63c 100644
--- a/arch/arm/mach-rpc/include/mach/hardware.h
+++ b/arch/arm/mach-rpc/include/mach/hardware.h
@@ -36,7 +36,7 @@
#define EASI_SIZE 0x08000000 /* EASI I/O */
#define EASI_START 0x08000000
-#define EASI_BASE 0xe5000000
+#define EASI_BASE IOMEM(0xe5000000)
#define IO_START 0x03000000 /* I/O */
#define IO_SIZE 0x01000000
@@ -51,21 +51,20 @@
/*
* IO Addresses
*/
-#define VIDC_BASE IOMEM(0xe0400000)
-#define EXPMASK_BASE 0xe0360000
-#define IOMD_BASE IOMEM(0xe0200000)
-#define IOC_BASE IOMEM(0xe0200000)
-#define PCIO_BASE IOMEM(0xe0010000)
-#define FLOPPYDMA_BASE IOMEM(0xe002a000)
+#define ECARD_EASI_BASE (EASI_BASE)
+#define VIDC_BASE (IO_BASE + 0x00400000)
+#define EXPMASK_BASE (IO_BASE + 0x00360000)
+#define ECARD_IOC4_BASE (IO_BASE + 0x00270000)
+#define ECARD_IOC_BASE (IO_BASE + 0x00240000)
+#define IOMD_BASE (IO_BASE + 0x00200000)
+#define IOC_BASE (IO_BASE + 0x00200000)
+#define ECARD_MEMC8_BASE (IO_BASE + 0x0002b000)
+#define FLOPPYDMA_BASE (IO_BASE + 0x0002a000)
+#define PCIO_BASE (IO_BASE + 0x00010000)
+#define ECARD_MEMC_BASE (IO_BASE + 0x00000000)
#define vidc_writel(val) __raw_writel(val, VIDC_BASE)
-#define IO_EC_EASI_BASE 0x81400000
-#define IO_EC_IOC4_BASE 0x8009c000
-#define IO_EC_IOC_BASE 0x80090000
-#define IO_EC_MEMC8_BASE 0x8000ac00
-#define IO_EC_MEMC_BASE 0x80000000
-
#define NETSLOT_BASE 0x0302b000
#define NETSLOT_SIZE 0x00001000
diff --git a/arch/arm/mach-rpc/include/mach/io.h b/arch/arm/mach-rpc/include/mach/io.h
index 20da7f4..695f4ed 100644
--- a/arch/arm/mach-rpc/include/mach/io.h
+++ b/arch/arm/mach-rpc/include/mach/io.h
@@ -15,195 +15,18 @@
#include <mach/hardware.h>
-#define IO_SPACE_LIMIT 0xffffffff
+#define IO_SPACE_LIMIT 0xffff
/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses. PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1. ARM addresses are 0x80000000+
- * and are translated to the start of IO. Note that all addresses are
- * shifted left!
- */
-#define __PORT_PCIO(x) (!((x) & 0x80000000))
-
-/*
- * Dynamic IO functions.
- */
-static inline void __outb (unsigned int value, unsigned int port)
-{
- unsigned long temp;
- __asm__ __volatile__(
- "tst %2, #0x80000000\n\t"
- "mov %0, %4\n\t"
- "addeq %0, %0, %3\n\t"
- "strb %1, [%0, %2, lsl #2] @ outb"
- : "=&r" (temp)
- : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
- : "cc");
-}
-
-static inline void __outw (unsigned int value, unsigned int port)
-{
- unsigned long temp;
- __asm__ __volatile__(
- "tst %2, #0x80000000\n\t"
- "mov %0, %4\n\t"
- "addeq %0, %0, %3\n\t"
- "str %1, [%0, %2, lsl #2] @ outw"
- : "=&r" (temp)
- : "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
- : "cc");
-}
-
-static inline void __outl (unsigned int value, unsigned int port)
-{
- unsigned long temp;
- __asm__ __volatile__(
- "tst %2, #0x80000000\n\t"
- "mov %0, %4\n\t"
- "addeq %0, %0, %3\n\t"
- "str %1, [%0, %2, lsl #2] @ outl"
- : "=&r" (temp)
- : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
- : "cc");
-}
-
-#define DECLARE_DYN_IN(sz,fnsuffix,instr) \
-static inline unsigned sz __in##fnsuffix (unsigned int port) \
-{ \
- unsigned long temp, value; \
- __asm__ __volatile__( \
- "tst %2, #0x80000000\n\t" \
- "mov %0, %4\n\t" \
- "addeq %0, %0, %3\n\t" \
- "ldr" instr " %1, [%0, %2, lsl #2] @ in" #fnsuffix \
- : "=&r" (temp), "=r" (value) \
- : "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) \
- : "cc"); \
- return (unsigned sz)value; \
-}
-
-static inline void __iomem *__deprecated __ioaddr(unsigned int port)
-{
- void __iomem *ret;
- if (__PORT_PCIO(port))
- ret = PCIO_BASE;
- else
- ret = IO_BASE;
- return ret + (port << 2);
-}
-
-#define DECLARE_IO(sz,fnsuffix,instr) \
- DECLARE_DYN_IN(sz,fnsuffix,instr)
-
-DECLARE_IO(char,b,"b")
-DECLARE_IO(short,w,"")
-DECLARE_IO(int,l,"")
-
-#undef DECLARE_IO
-#undef DECLARE_DYN_IN
-
-/*
- * Constant address IO functions
+ * We need PC style IO addressing for:
+ * - floppy (at 0x3f2,0x3f4,0x3f5,0x3f7)
+ * - parport (at 0x278-0x27a, 0x27b-0x27f, 0x778-0x77a)
+ * - 8250 serial (only for compile)
*
- * These have to be macros for the 'J' constraint to work -
- * +/-4096 immediate operand.
+ * These peripherals are found in an area of MMIO which looks very much
+ * like an ISA bus, but with registers at the low byte of each word.
*/
-#define __outbc(value,port) \
-({ \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "strb %0, [%1, %2] @ outbc" \
- : : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2)); \
- else \
- __asm__ __volatile__( \
- "strb %0, [%1, %2] @ outbc" \
- : : "r" (value), "r" (IO_BASE), "r" ((port) << 2)); \
-})
-
-#define __inbc(port) \
-({ \
- unsigned char result; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "ldrb %0, [%1, %2] @ inbc" \
- : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \
- else \
- __asm__ __volatile__( \
- "ldrb %0, [%1, %2] @ inbc" \
- : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \
- result; \
-})
-
-#define __outwc(value,port) \
-({ \
- unsigned long __v = value; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "str %0, [%1, %2] @ outwc" \
- : : "r" (__v|__v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2)); \
- else \
- __asm__ __volatile__( \
- "str %0, [%1, %2] @ outwc" \
- : : "r" (__v|__v<<16), "r" (IO_BASE), "r" ((port) << 2)); \
-})
-
-#define __inwc(port) \
-({ \
- unsigned short result; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "ldr %0, [%1, %2] @ inwc" \
- : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \
- else \
- __asm__ __volatile__( \
- "ldr %0, [%1, %2] @ inwc" \
- : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \
- result & 0xffff; \
-})
-
-#define __outlc(value,port) \
-({ \
- unsigned long __v = value; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "str %0, [%1, %2] @ outlc" \
- : : "r" (__v), "r" (PCIO_BASE), "Jr" ((port) << 2)); \
- else \
- __asm__ __volatile__( \
- "str %0, [%1, %2] @ outlc" \
- : : "r" (__v), "r" (IO_BASE), "r" ((port) << 2)); \
-})
-
-#define __inlc(port) \
-({ \
- unsigned long result; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "ldr %0, [%1, %2] @ inlc" \
- : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \
- else \
- __asm__ __volatile__( \
- "ldr %0, [%1, %2] @ inlc" \
- : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \
- result; \
-})
-
-#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p))
-#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p))
-#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p))
-#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
-#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
-#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
-
-/* the following macro is deprecated */
-#define ioaddr(port) ((unsigned long)__ioaddr((port)))
-
-#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l)
-#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l)
-
-#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l)
-#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l)
+#define __io(a) (PCIO_BASE + ((a) << 2))
/*
* 1:1 mapping for ioremapped regions.
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index a9241eb..8559598 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -74,7 +74,7 @@
.length = IO_SIZE ,
.type = MT_DEVICE
}, { /* EASI space */
- .virtual = EASI_BASE,
+ .virtual = (unsigned long)EASI_BASE,
.pfn = __phys_to_pfn(EASI_START),
.length = EASI_SIZE,
.type = MT_DEVICE
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
index f7f6b07..6fac70f 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -11,11 +11,6 @@
* published by the Free Software Foundation.
*/
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
/* some boards require extra gpio capacity to support external
* devices that need GPIO.
*/
@@ -28,7 +23,6 @@
#define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA)
#endif
-#include <asm-generic/gpio.h>
#include <mach/gpio-nrs.h>
#include <mach/gpio-fns.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
index 97e42bf..fc897d3 100644
--- a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
+++ b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
@@ -14,7 +14,7 @@
#ifndef __ASM_ARCH_H1940_LATCH_H
#define __ASM_ARCH_H1940_LATCH_H
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#define H1940_LATCH_GPIO(x) (S3C_GPIO_END + (x))
diff --git a/arch/arm/mach-s3c2410/include/mach/io.h b/arch/arm/mach-s3c2410/include/mach/io.h
index 9813dbf..118749f 100644
--- a/arch/arm/mach-s3c2410/include/mach/io.h
+++ b/arch/arm/mach-s3c2410/include/mach/io.h
@@ -199,8 +199,6 @@
#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
#define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p))
-/* the following macro is deprecated */
-#define ioaddr(port) __ioaddr((port))
#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l)
#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l)
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index f1d3bd8..343a540 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -170,7 +170,9 @@
{
printk("S3C2410: Initialising architecture\n");
+#ifdef CONFIG_PM
register_syscore_ops(&s3c2410_pm_syscore_ops);
+#endif
register_syscore_ops(&s3c24xx_irq_syscore_ops);
return sysdev_register(&s3c2410_sysdev);
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index ef0958d..57a1e01 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -245,7 +245,9 @@
{
printk("S3C2412: Initialising architecture\n");
+#ifdef CONFIG_PM
register_syscore_ops(&s3c2412_pm_syscore_ops);
+#endif
register_syscore_ops(&s3c24xx_irq_syscore_ops);
return sysdev_register(&s3c2412_sysdev);
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
index 494ce91..20b3fdf 100644
--- a/arch/arm/mach-s3c2416/s3c2416.c
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -97,7 +97,9 @@
s3c_fb_setname("s3c2443-fb");
+#ifdef CONFIG_PM
register_syscore_ops(&s3c2416_pm_syscore_ops);
+#endif
register_syscore_ops(&s3c24xx_irq_syscore_ops);
return sysdev_register(&s3c2416_sysdev);
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index ce99ff7..2270d33 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -55,7 +55,9 @@
/* register suspend/resume handlers */
+#ifdef CONFIG_PM
register_syscore_ops(&s3c2410_pm_syscore_ops);
+#endif
register_syscore_ops(&s3c244x_pm_syscore_ops);
register_syscore_ops(&s3c24xx_irq_syscore_ops);
diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c
index 9ad99f8..6f2b65e 100644
--- a/arch/arm/mach-s3c2440/s3c2442.c
+++ b/arch/arm/mach-s3c2440/s3c2442.c
@@ -169,7 +169,9 @@
{
printk("S3C2442: Initialising architecture\n");
+#ifdef CONFIG_PM
register_syscore_ops(&s3c2410_pm_syscore_ops);
+#endif
register_syscore_ops(&s3c244x_pm_syscore_ops);
register_syscore_ops(&s3c24xx_irq_syscore_ops);
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio.h b/arch/arm/mach-s3c64xx/include/mach/gpio.h
index 0d46e99..6e34c2f 100644
--- a/arch/arm/mach-s3c64xx/include/mach/gpio.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio.h
@@ -12,11 +12,6 @@
* published by the Free Software Foundation.
*/
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
/* GPIO bank sizes */
#define S3C64XX_GPIO_A_NR (8)
#define S3C64XX_GPIO_B_NR (7)
@@ -96,5 +91,3 @@
#define BOARD_NR_GPIOS 16
#define ARCH_NR_GPIOS (GPIO_BOARD_START + BOARD_NR_GPIOS)
-
-#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s5p64x0/include/mach/gpio.h b/arch/arm/mach-s5p64x0/include/mach/gpio.h
index adb5f29..06cd3c9 100644
--- a/arch/arm/mach-s5p64x0/include/mach/gpio.h
+++ b/arch/arm/mach-s5p64x0/include/mach/gpio.h
@@ -13,11 +13,6 @@
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H __FILE__
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
/* GPIO bank sizes */
#define S5P6440_GPIO_A_NR (6)
@@ -134,6 +129,4 @@
#define ARCH_NR_GPIOS (S5P64X0_GPIO_END + CONFIG_SAMSUNG_GPIO_EXTRA)
-#include <asm-generic/gpio.h>
-
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
index 29a8a12..5e1a924 100644
--- a/arch/arm/mach-s5pc100/include/mach/gpio.h
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -15,11 +15,6 @@
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H __FILE__
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
/* GPIO bank sizes */
#define S5PC100_GPIO_A0_NR (8)
#define S5PC100_GPIO_A1_NR (5)
@@ -146,6 +141,4 @@
/* define the number of gpios we need to the one after the MP04() range */
#define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1)
-#include <asm-generic/gpio.h>
-
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h
index a5a1e33..6c8b903 100644
--- a/arch/arm/mach-s5pv210/include/mach/gpio.h
+++ b/arch/arm/mach-s5pv210/include/mach/gpio.h
@@ -13,11 +13,6 @@
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H __FILE__
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
/* Practically, GPIO banks up to MP03 are the configurable gpio banks */
/* GPIO bank sizes */
@@ -142,6 +137,4 @@
#define ARCH_NR_GPIOS (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + \
CONFIG_SAMSUNG_GPIO_EXTRA + 1)
-#include <asm-generic/gpio.h>
-
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 41252d2..73a5c64 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -3,7 +3,7 @@
#
# Common support
-obj-y := clock.o generic.o gpio.o irq.o dma.o time.o #nmi-oopser.o
+obj-y := clock.o generic.o irq.o dma.o time.o #nmi-oopser.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index e21f347..5fa5ae1 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -9,6 +9,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -24,7 +25,6 @@
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <asm/irq.h>
-#include <asm/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h
index 7befc10..7036318 100644
--- a/arch/arm/mach-sa1100/include/mach/gpio.h
+++ b/arch/arm/mach-sa1100/include/mach/gpio.h
@@ -28,6 +28,8 @@
#include <asm/irq.h>
#include <asm-generic/gpio.h>
+#define __ARM_GPIOLIB_COMPLEX
+
static inline int gpio_get_value(unsigned gpio)
{
if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
@@ -51,7 +53,5 @@
#define gpio_to_irq(gpio) ((gpio < 11) ? (IRQ_GPIO0 + gpio) : \
(IRQ_GPIO11 - 11 + gpio))
-#define irq_to_gpio(irq) ((irq < IRQ_GPIO11_27) ? (irq - IRQ_GPIO0) : \
- (irq - IRQ_GPIO11 + 11))
#endif
diff --git a/arch/arm/mach-sa1100/include/mach/io.h b/arch/arm/mach-sa1100/include/mach/io.h
index d8b43f3..dfc27ff 100644
--- a/arch/arm/mach-sa1100/include/mach/io.h
+++ b/arch/arm/mach-sa1100/include/mach/io.h
@@ -10,11 +10,9 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#define IO_SPACE_LIMIT 0xffffffff
-
/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
+ * __io() is required to be an equivalent mapping to __mem_pci() for
+ * SOC_COMMON to work.
*/
#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)
diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h
index 2b1bb9e..7bf0890 100644
--- a/arch/arm/mach-shmobile/include/mach/gpio.h
+++ b/arch/arm/mach-shmobile/include/mach/gpio.h
@@ -18,31 +18,15 @@
#ifdef CONFIG_GPIOLIB
-static inline int gpio_get_value(unsigned gpio)
-{
- return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- __gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
- return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return __gpio_to_irq(gpio);
-}
-
static inline int irq_to_gpio(unsigned int irq)
{
return -ENOSYS;
}
+#else
+
+#define __ARM_GPIOLIB_COMPLEX
+
#endif /* CONFIG_GPIOLIB */
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c
index 9c27b95..6db7d69 100644
--- a/arch/arm/mach-tegra/board-harmony-pcie.c
+++ b/arch/arm/mach-tegra/board-harmony-pcie.c
@@ -24,12 +24,10 @@
#include <mach/pinmux.h>
#include "board.h"
+#include "board-harmony.h"
#ifdef CONFIG_TEGRA_PCI
-/* GPIO 3 of the PMIC */
-#define EN_VDD_1V05_GPIO (TEGRA_NR_GPIOS + 2)
-
static int __init harmony_pcie_init(void)
{
struct regulator *regulator = NULL;
@@ -38,11 +36,11 @@
if (!machine_is_harmony())
return 0;
- err = gpio_request(EN_VDD_1V05_GPIO, "EN_VDD_1V05");
+ err = gpio_request(TEGRA_GPIO_EN_VDD_1V05_GPIO, "EN_VDD_1V05");
if (err)
return err;
- gpio_direction_output(EN_VDD_1V05_GPIO, 1);
+ gpio_direction_output(TEGRA_GPIO_EN_VDD_1V05_GPIO, 1);
regulator = regulator_get(NULL, "pex_clk");
if (IS_ERR_OR_NULL(regulator))
@@ -68,7 +66,7 @@
regulator_disable(regulator);
regulator_put(regulator);
err_reg:
- gpio_free(EN_VDD_1V05_GPIO);
+ gpio_free(TEGRA_GPIO_EN_VDD_1V05_GPIO);
return err;
}
diff --git a/arch/arm/mach-tegra/board-harmony.h b/arch/arm/mach-tegra/board-harmony.h
index d85142e..139d96c 100644
--- a/arch/arm/mach-tegra/board-harmony.h
+++ b/arch/arm/mach-tegra/board-harmony.h
@@ -17,6 +17,8 @@
#ifndef _MACH_TEGRA_BOARD_HARMONY_H
#define _MACH_TEGRA_BOARD_HARMONY_H
+#include <mach/gpio-tegra.h>
+
#define HARMONY_GPIO_TPS6586X(_x_) (TEGRA_NR_GPIOS + (_x_))
#define HARMONY_GPIO_WM8903(_x_) (HARMONY_GPIO_TPS6586X(4) + (_x_))
@@ -31,6 +33,7 @@
#define TEGRA_GPIO_HP_DET TEGRA_GPIO_PW2
#define TEGRA_GPIO_INT_MIC_EN TEGRA_GPIO_PX0
#define TEGRA_GPIO_EXT_MIC_EN TEGRA_GPIO_PX1
+#define TEGRA_GPIO_EN_VDD_1V05_GPIO HARMONY_GPIO_TPS6586X(2)
void harmony_pinmux_init(void);
int harmony_regulator_init(void);
diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h
index d4ff39d..42ce863 100644
--- a/arch/arm/mach-tegra/board-paz00.h
+++ b/arch/arm/mach-tegra/board-paz00.h
@@ -17,6 +17,8 @@
#ifndef _MACH_TEGRA_BOARD_PAZ00_H
#define _MACH_TEGRA_BOARD_PAZ00_H
+#include <mach/gpio-tegra.h>
+
#define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5
#define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1
#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3
diff --git a/arch/arm/mach-tegra/board-seaboard.h b/arch/arm/mach-tegra/board-seaboard.h
index d8415e1..15b6c57 100644
--- a/arch/arm/mach-tegra/board-seaboard.h
+++ b/arch/arm/mach-tegra/board-seaboard.h
@@ -17,6 +17,8 @@
#ifndef _MACH_TEGRA_BOARD_SEABOARD_H
#define _MACH_TEGRA_BOARD_SEABOARD_H
+#include <mach/gpio-tegra.h>
+
#define TEGRA_GPIO_SD2_CD TEGRA_GPIO_PI5
#define TEGRA_GPIO_SD2_WP TEGRA_GPIO_PH1
#define TEGRA_GPIO_SD2_POWER TEGRA_GPIO_PI6
diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c
index 47c596c..bcb1916 100644
--- a/arch/arm/mach-tegra/board-trimslice-pinmux.c
+++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c
@@ -13,12 +13,11 @@
* GNU General Public License for more details.
*
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <mach/pinmux.h>
-#include <mach/gpio.h>
#include "gpio-names.h"
#include "board-trimslice.h"
diff --git a/arch/arm/mach-tegra/board-trimslice.h b/arch/arm/mach-tegra/board-trimslice.h
index 7a7dee8..50f128d 100644
--- a/arch/arm/mach-tegra/board-trimslice.h
+++ b/arch/arm/mach-tegra/board-trimslice.h
@@ -17,6 +17,8 @@
#ifndef _MACH_TEGRA_BOARD_TRIMSLICE_H
#define _MACH_TEGRA_BOARD_TRIMSLICE_H
+#include <mach/gpio-tegra.h>
+
#define TRIMSLICE_GPIO_SD4_CD TEGRA_GPIO_PP1 /* mmc4 cd */
#define TRIMSLICE_GPIO_SD4_WP TEGRA_GPIO_PP2 /* mmc4 wp */
diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c
index 0e1016a..0e0fd4d 100644
--- a/arch/arm/mach-tegra/cpu-tegra.c
+++ b/arch/arm/mach-tegra/cpu-tegra.c
@@ -32,7 +32,6 @@
#include <asm/system.h>
-#include <mach/hardware.h>
#include <mach/clk.h>
/* Frequency table index must be sequential starting at 0 */
diff --git a/arch/arm/mach-tegra/include/mach/gpio-tegra.h b/arch/arm/mach-tegra/include/mach/gpio-tegra.h
new file mode 100644
index 0000000..87d37fd
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/gpio-tegra.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-tegra/include/mach/gpio.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ * Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_GPIO_TEGRA_H
+#define __MACH_TEGRA_GPIO_TEGRA_H
+
+#include <linux/types.h>
+#include <mach/irqs.h>
+
+#define TEGRA_NR_GPIOS INT_GPIO_NR
+
+#define TEGRA_GPIO_TO_IRQ(gpio) (INT_GPIO_BASE + (gpio))
+
+struct tegra_gpio_table {
+ int gpio; /* GPIO number */
+ bool enable; /* Enable for GPIO at init? */
+};
+
+void tegra_gpio_config(struct tegra_gpio_table *table, int num);
+void tegra_gpio_enable(int gpio);
+void tegra_gpio_disable(int gpio);
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/gpio.h b/arch/arm/mach-tegra/include/mach/gpio.h
index 196f114..e69de29 100644
--- a/arch/arm/mach-tegra/include/mach/gpio.h
+++ b/arch/arm/mach-tegra/include/mach/gpio.h
@@ -1,60 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/gpio.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- * Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_GPIO_H
-#define __MACH_TEGRA_GPIO_H
-
-#include <linux/init.h>
-#include <mach/irqs.h>
-
-#define TEGRA_NR_GPIOS INT_GPIO_NR
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-
-#define TEGRA_GPIO_TO_IRQ(gpio) (INT_GPIO_BASE + (gpio))
-#define TEGRA_IRQ_TO_GPIO(irq) ((irq) - INT_GPIO_BASE)
-
-static inline int gpio_to_irq(unsigned int gpio)
-{
- if (gpio < TEGRA_NR_GPIOS)
- return INT_GPIO_BASE + gpio;
- return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned int irq)
-{
- if ((irq >= INT_GPIO_BASE) && (irq < INT_GPIO_BASE + INT_GPIO_NR))
- return irq - INT_GPIO_BASE;
- return -EINVAL;
-}
-
-struct tegra_gpio_table {
- int gpio; /* GPIO number */
- bool enable; /* Enable for GPIO at init? */
-};
-
-void tegra_gpio_config(struct tegra_gpio_table *table, int num);
-void tegra_gpio_enable(int gpio);
-void tegra_gpio_disable(int gpio);
-
-#endif
diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c
index 88081bb..37576a7 100644
--- a/arch/arm/mach-tegra/usb_phy.c
+++ b/arch/arm/mach-tegra/usb_phy.c
@@ -28,6 +28,7 @@
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <asm/mach-types.h>
+#include <mach/gpio-tegra.h>
#include <mach/usb_phy.h>
#include <mach/iomap.h>
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index 32a7b0f..7b5c229 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -6,6 +6,7 @@
config MACH_U300
bool "U300"
+ select GPIO_U300
comment "ST-Ericsson U300/U330/U335/U365 Feature Selections"
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 376b6df..22c5ab7 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -38,6 +38,7 @@
#include <mach/hardware.h>
#include <mach/syscon.h>
#include <mach/dma_channels.h>
+#include <mach/gpio-u300.h>
#include "clock.h"
#include "mmc.h"
@@ -242,7 +243,7 @@
.end = IRQ_U300_GPIO_PORT2,
.flags = IORESOURCE_IRQ,
},
-#ifdef U300_COH901571_3
+#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
{
.name = "gpio3",
.start = IRQ_U300_GPIO_PORT3,
@@ -255,6 +256,7 @@
.end = IRQ_U300_GPIO_PORT4,
.flags = IORESOURCE_IRQ,
},
+#endif
#ifdef CONFIG_MACH_U300_BS335
{
.name = "gpio5",
@@ -269,7 +271,6 @@
.flags = IORESOURCE_IRQ,
},
#endif /* CONFIG_MACH_U300_BS335 */
-#endif /* U300_COH901571_3 */
};
static struct resource keypad_resources[] = {
@@ -1559,11 +1560,35 @@
.resource = i2c1_resources,
};
+/*
+ * The different variants have a few different versions of the
+ * GPIO block, with different number of ports.
+ */
+static struct u300_gpio_platform u300_gpio_plat = {
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
+ .variant = U300_GPIO_COH901335,
+ .ports = 3,
+#endif
+#ifdef CONFIG_MACH_U300_BS335
+ .variant = U300_GPIO_COH901571_3_BS335,
+ .ports = 7,
+#endif
+#ifdef CONFIG_MACH_U300_BS365
+ .variant = U300_GPIO_COH901571_3_BS365,
+ .ports = 5,
+#endif
+ .gpio_base = 0,
+ .gpio_irq_base = IRQ_U300_GPIO_BASE,
+};
+
static struct platform_device gpio_device = {
.name = "u300-gpio",
.id = -1,
.num_resources = ARRAY_SIZE(gpio_resources),
.resource = gpio_resources,
+ .dev = {
+ .platform_data = &u300_gpio_plat,
+ },
};
static struct platform_device keypad_device = {
@@ -1669,7 +1694,7 @@
BUG_ON(IS_ERR(clk));
clk_enable(clk);
- for (i = 0; i < NR_IRQS; i++)
+ for (i = 0; i < U300_VIC_IRQS_END; i++)
set_bit(i, (unsigned long *) &mask[0]);
vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
diff --git a/arch/arm/mach-u300/include/mach/gpio-u300.h b/arch/arm/mach-u300/include/mach/gpio-u300.h
new file mode 100644
index 0000000..0c2b202
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/gpio-u300.h
@@ -0,0 +1,150 @@
+/*
+ * Copyright (C) 2007-2011 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * GPIO block resgister definitions and inline macros for
+ * U300 GPIO COH 901 335 or COH 901 571/3
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_U300_GPIO_U300_H
+#define __MACH_U300_GPIO_U300_H
+
+/*
+ * Individual pin assignments for the B26/S26. Notice that the
+ * actual usage of these pins depends on the PAD MUX settings, that
+ * is why the same number can potentially appear several times.
+ * In the reference design each pin is only used for one purpose.
+ * These were determined by inspecting the B26/S26 schematic:
+ * 2/1911-ROA 128 1603
+ */
+#ifdef CONFIG_MACH_U300_BS2X
+#define U300_GPIO_PIN_UART_RX 0
+#define U300_GPIO_PIN_UART_TX 1
+#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */
+#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */
+#define U300_GPIO_PIN_CAM_SLEEP 4
+#define U300_GPIO_PIN_CAM_REG_EN 5
+#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */
+#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */
+#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */
+#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */
+#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */
+#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */
+#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */
+#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */
+#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */
+#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */
+#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
+#endif
+
+/*
+ * Individual pin assignments for the B330/S330 and B365/S365.
+ * Notice that the actual usage of these pins depends on the
+ * PAD MUX settings, that is why the same number can potentially
+ * appear several times. In the reference design each pin is only
+ * used for one purpose. These were determined by inspecting the
+ * S365 schematic.
+ */
+#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
+ defined(CONFIG_MACH_U300_BS335)
+#define U300_GPIO_PIN_UART_RX 0
+#define U300_GPIO_PIN_UART_TX 1
+#define U300_GPIO_PIN_UART_CTS 2
+#define U300_GPIO_PIN_UART_RTS 3
+#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */
+#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */
+#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */
+#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */
+
+#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */
+#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */
+#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */
+#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */
+#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */
+#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */
+#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */
+#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */
+#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */
+#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */
+#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */
+#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */
+#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */
+#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */
+#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */
+#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */
+#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */
+#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */
+#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */
+#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */
+#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */
+#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */
+#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */
+#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */
+
+#ifdef CONFIG_MACH_U300_BS335
+
+#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */
+#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */
+#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */
+#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */
+#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */
+#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */
+#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */
+#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */
+#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */
+#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */
+#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */
+#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */
+#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */
+#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */
+#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */
+#endif
+
+#endif
+
+/**
+ * enum u300_gpio_variant - the type of U300 GPIO employed
+ */
+enum u300_gpio_variant {
+ U300_GPIO_COH901335,
+ U300_GPIO_COH901571_3_BS335,
+ U300_GPIO_COH901571_3_BS365,
+};
+
+/**
+ * struct u300_gpio_platform - U300 GPIO platform data
+ * @variant: IP block variant
+ * @ports: number of GPIO block ports
+ * @gpio_base: first GPIO number for this block (use a free range)
+ * @gpio_irq_base: first GPIO IRQ number for this block (use a free range)
+ */
+struct u300_gpio_platform {
+ enum u300_gpio_variant variant;
+ u8 ports;
+ int gpio_base;
+ int gpio_irq_base;
+};
+
+#endif /* __MACH_U300_GPIO_U300_H */
diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h
index d5a71ab..e69de29 100644
--- a/arch/arm/mach-u300/include/mach/gpio.h
+++ b/arch/arm/mach-u300/include/mach/gpio.h
@@ -1,294 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/gpio.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * GPIO block resgister definitions and inline macros for
- * U300 GPIO COH 901 335 or COH 901 571/3
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef __MACH_U300_GPIO_H
-#define __MACH_U300_GPIO_H
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-/* Switch type depending on platform/chip variant */
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_COH901335
-#endif
-#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
-#define U300_COH901571_3
-#endif
-
-/* Get base address for regs here */
-#include "u300-regs.h"
-/* IRQ numbers */
-#include "irqs.h"
-
-/*
- * This is the GPIO block definitions. GPIO (General Purpose I/O) can be
- * used for anything, and often is. The event/enable etc figures are for
- * the lowermost pin (pin 0 on each port), shift this left to match your
- * pin if you're gonna use these values.
- */
-#ifdef U300_COH901335
-#define U300_GPIO_PORTX_SPACING (0x1C)
-/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
-#define U300_GPIO_PXPDIR (0x00)
-#define U300_GPIO_PXPDOR (0x00)
-/* Port X Pin Config Register 32bit (R/W) */
-#define U300_GPIO_PXPCR (0x04)
-#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
-#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
-#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
-/* Port X Interrupt Event Register 32bit (R/W) */
-#define U300_GPIO_PXIEV (0x08)
-#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL)
-#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL)
-/* Port X Interrupt Enable Register 32bit (R/W) */
-#define U300_GPIO_PXIEN (0x0C)
-#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL)
-/* Port X Interrupt Force Register 32bit (R/W) */
-#define U300_GPIO_PXIFR (0x10)
-#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL)
-#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL)
-/* Port X Interrupt Config Register 32bit (R/W) */
-#define U300_GPIO_PXICR (0x14)
-#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
-/* Port X Pull-up Enable Register 32bit (R/W) */
-#define U300_GPIO_PXPER (0x18)
-#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
-/* Control Register 32bit (R/W) */
-#define U300_GPIO_CR (0x54)
-#define U300_GPIO_CR_BLOCK_CLOCK_ENABLE (0x00000001UL)
-/* three ports of 8 bits each = GPIO pins 0..23 */
-#define U300_GPIO_NUM_PORTS 3
-#define U300_GPIO_PINS_PER_PORT 8
-#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
-#endif
-
-#ifdef U300_COH901571_3
-/*
- * Control Register 32bit (R/W)
- * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
- * gives the number of GPIO pins.
- * bit 8-2 (mask 0x000001FC) contains the core version ID.
- */
-#define U300_GPIO_CR (0x00)
-#define U300_GPIO_CR_SYNC_SEL_ENABLE (0x00000002UL)
-#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL)
-#define U300_GPIO_PORTX_SPACING (0x30)
-/* Port X Pin Data INPUT Register 32bit (R/W) */
-#define U300_GPIO_PXPDIR (0x04)
-/* Port X Pin Data OUTPUT Register 32bit (R/W) */
-#define U300_GPIO_PXPDOR (0x08)
-/* Port X Pin Config Register 32bit (R/W) */
-#define U300_GPIO_PXPCR (0x0C)
-#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
-#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
-#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
-/* Port X Pull-up Enable Register 32bit (R/W) */
-#define U300_GPIO_PXPER (0x10)
-#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
-/* Port X Interrupt Event Register 32bit (R/W) */
-#define U300_GPIO_PXIEV (0x14)
-#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL)
-#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL)
-/* Port X Interrupt Enable Register 32bit (R/W) */
-#define U300_GPIO_PXIEN (0x18)
-#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL)
-/* Port X Interrupt Force Register 32bit (R/W) */
-#define U300_GPIO_PXIFR (0x1C)
-#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL)
-#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL)
-/* Port X Interrupt Config Register 32bit (R/W) */
-#define U300_GPIO_PXICR (0x20)
-#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
-#ifdef CONFIG_MACH_U300_BS335
-/* seven ports of 8 bits each = GPIO pins 0..55 */
-#define U300_GPIO_NUM_PORTS 7
-#else
-/* five ports of 8 bits each = GPIO pins 0..39 */
-#define U300_GPIO_NUM_PORTS 5
-#endif
-#define U300_GPIO_PINS_PER_PORT 8
-#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
-#endif
-
-/*
- * Individual pin assignments for the B26/S26. Notice that the
- * actual usage of these pins depends on the PAD MUX settings, that
- * is why the same number can potentially appear several times.
- * In the reference design each pin is only used for one purpose.
- * These were determined by inspecting the B26/S26 schematic:
- * 2/1911-ROA 128 1603
- */
-#ifdef CONFIG_MACH_U300_BS2X
-#define U300_GPIO_PIN_UART_RX 0
-#define U300_GPIO_PIN_UART_TX 1
-#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */
-#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */
-#define U300_GPIO_PIN_CAM_SLEEP 4
-#define U300_GPIO_PIN_CAM_REG_EN 5
-#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */
-#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */
-#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */
-#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */
-#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
-#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
-#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */
-#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */
-#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */
-#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */
-#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */
-#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */
-#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
-#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
-#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
-#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
-#endif
-
-/*
- * Individual pin assignments for the B330/S330 and B365/S365.
- * Notice that the actual usage of these pins depends on the
- * PAD MUX settings, that is why the same number can potentially
- * appear several times. In the reference design each pin is only
- * used for one purpose. These were determined by inspecting the
- * S365 schematic.
- */
-#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
- defined(CONFIG_MACH_U300_BS335)
-#define U300_GPIO_PIN_UART_RX 0
-#define U300_GPIO_PIN_UART_TX 1
-#define U300_GPIO_PIN_UART_CTS 2
-#define U300_GPIO_PIN_UART_RTS 3
-#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */
-#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */
-#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */
-#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */
-
-#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */
-#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */
-#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */
-#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
-#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
-#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */
-#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */
-#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */
-#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */
-#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */
-#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */
-#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
-#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
-#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
-#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */
-#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */
-#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */
-#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */
-#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */
-#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */
-#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */
-#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */
-#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */
-#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */
-#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */
-#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */
-#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */
-#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */
-#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */
-
-#ifdef CONFIG_MACH_U300_BS335
-
-#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */
-#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */
-#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */
-#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */
-#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */
-#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */
-#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */
-#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */
-#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */
-#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */
-#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */
-#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */
-#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */
-#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */
-#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */
-#endif
-
-#endif
-
-/* translates a pin number to a port number */
-#define PIN_TO_PORT(val) (val >> 3)
-
-/* These can be found in arch/arm/mach-u300/gpio.c */
-extern int gpio_is_valid(int number);
-extern int gpio_request(unsigned gpio, const char *label);
-extern void gpio_free(unsigned gpio);
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-extern int gpio_register_callback(unsigned gpio,
- int (*func)(void *arg),
- void *);
-extern int gpio_unregister_callback(unsigned gpio);
-extern void enable_irq_on_gpio_pin(unsigned gpio, int edge);
-extern void disable_irq_on_gpio_pin(unsigned gpio);
-extern void gpio_pullup(unsigned gpio, int value);
-extern int gpio_get_value(unsigned gpio);
-extern void gpio_set_value(unsigned gpio, int value);
-
-#define gpio_get_value_cansleep gpio_get_value
-#define gpio_set_value_cansleep gpio_set_value
-
-/* wrappers to sleep-enable the previous two functions */
-static inline unsigned gpio_to_irq(unsigned gpio)
-{
- return PIN_TO_PORT(gpio) + IRQ_U300_GPIO_PORT0;
-}
-
-static inline unsigned irq_to_gpio(unsigned irq)
-{
- /*
- * FIXME: This is no 1-1 mapping at all, it points to the
- * whole block of 8 pins.
- */
- return (irq - IRQ_U300_GPIO_PORT0) << 3;
-}
-
-#endif
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index 09b1b28..d270fea 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -72,7 +72,7 @@
/* DB3150 and DB3200 have only 45 IRQs */
#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_NR_IRQS 45
+#define U300_VIC_IRQS_END 45
#endif
/* The DB3350-specific interrupt lines */
@@ -88,7 +88,7 @@
#define IRQ_U300_GPIO_PORT4 53
#define IRQ_U300_GPIO_PORT5 54
#define IRQ_U300_GPIO_PORT6 55
-#define U300_NR_IRQS 56
+#define U300_VIC_IRQS_END 56
#endif
/* The DB3210-specific interrupt lines */
@@ -106,16 +106,25 @@
#define IRQ_U300_NFIF 45
#define IRQ_U300_NFIF2 46
#define IRQ_U300_SYSCON_PLL_LOCK 47
-#define U300_NR_IRQS 48
+#define U300_VIC_IRQS_END 48
#endif
-#ifdef CONFIG_AB3550_CORE
-#define IRQ_AB3550_BASE (U300_NR_IRQS)
-#define IRQ_AB3550_END (IRQ_AB3550_BASE + 37)
-
-#define NR_IRQS (IRQ_AB3550_END + 1)
+/* Maximum 8*7 GPIO lines */
+#ifdef CONFIG_GPIO_U300
+#define IRQ_U300_GPIO_BASE (U300_VIC_IRQS_END)
+#define IRQ_U300_GPIO_END (IRQ_U300_GPIO_BASE + 56)
#else
-#define NR_IRQS U300_NR_IRQS
+#define IRQ_U300_GPIO_END (U300_VIC_IRQS_END)
#endif
+/* Optional AB3550 mixsig chip */
+#ifdef CONFIG_AB3550_CORE
+#define IRQ_AB3550_BASE (IRQ_U300_GPIO_END)
+#define IRQ_AB3550_END (IRQ_AB3550_BASE + 38)
+#else
+#define IRQ_AB3550_END (IRQ_U300_GPIO_END)
+#endif
+
+#define NR_IRQS (IRQ_AB3550_END)
+
#endif
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 677ccef..d9a5c92 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -13,12 +13,12 @@
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/mmc/host.h>
-#include <linux/gpio.h>
#include <linux/dmaengine.h>
#include <linux/amba/mmci.h>
#include <linux/slab.h>
#include <mach/coh901318.h>
#include <mach/dma_channels.h>
+#include <mach/gpio-u300.h>
#include "mmc.h"
#include "padmux.h"
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 4210cb4..a3e0c86 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -6,6 +6,7 @@
select ARM_GIC
select HAS_MTU
select ARM_ERRATA_753970
+ select ARM_ERRATA_754322
menu "Ux500 SoC"
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index f26fd76..15b23e4 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -6,10 +6,10 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include "pins-db8500.h"
diff --git a/arch/arm/mach-ux500/board-mop500-u8500uib.c b/arch/arm/mach-ux500/board-mop500-u8500uib.c
index 8ce46c0..feb5744 100644
--- a/arch/arm/mach-ux500/board-mop500-u8500uib.c
+++ b/arch/arm/mach-ux500/board-mop500-u8500uib.c
@@ -4,7 +4,7 @@
* Board data for the U8500 UIB, also known as the New UIB
* License terms: GNU General Public License (GPL), version 2
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/i2c.h>
@@ -13,7 +13,6 @@
#include <linux/mfd/tc3589x.h>
#include <linux/input/matrix_keypad.h>
-#include <mach/gpio.h>
#include <mach/irqs.h>
#include "board-mop500.h"
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 2cc4876..f67b83d 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -37,6 +37,7 @@
#include <plat/i2c.h>
#include <plat/ste_dma40.h>
#include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/setup.h>
diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c
index 739fb4c..63c3f80 100644
--- a/arch/arm/mach-ux500/board-u5500-sdi.c
+++ b/arch/arm/mach-ux500/board-u5500-sdi.c
@@ -7,9 +7,9 @@
#include <linux/amba/mmci.h>
#include <linux/mmc/host.h>
-#include <linux/gpio.h>
#include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
#include <mach/db5500-regs.h>
#include <plat/ste_dma40.h>
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 166d47a..e014aa7 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -8,7 +8,6 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
-#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/i2c.h>
@@ -17,6 +16,7 @@
#include <plat/pincfg.h>
#include <plat/i2c.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/devices.h>
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index 22705d2..9de1af0 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -13,7 +13,7 @@
#include <asm/mach/map.h>
#include <asm/pmu.h>
-#include <plat/gpio.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/devices.h>
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 4598b06..13e8890 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -14,12 +14,12 @@
#include <linux/amba/bus.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <asm/mach/map.h>
#include <asm/pmu.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index 13a4ce0..c563e54 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -13,7 +13,7 @@
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
-#include <plat/gpio.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h
index 3c4cd31..7389df9 100644
--- a/arch/arm/mach-ux500/include/mach/gpio.h
+++ b/arch/arm/mach-ux500/include/mach/gpio.h
@@ -7,6 +7,4 @@
*/
#define ARCH_NR_GPIOS 350
-#include <plat/gpio.h>
-
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-versatile/include/mach/gpio.h b/arch/arm/mach-versatile/include/mach/gpio.h
index 94ff276..40a8c17 100644
--- a/arch/arm/mach-versatile/include/mach/gpio.h
+++ b/arch/arm/mach-versatile/include/mach/gpio.h
@@ -1,6 +1 @@
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
+/* empty */
diff --git a/arch/arm/mach-vexpress/include/mach/io.h b/arch/arm/mach-vexpress/include/mach/io.h
index 748bb52..13522d8 100644
--- a/arch/arm/mach-vexpress/include/mach/io.h
+++ b/arch/arm/mach-vexpress/include/mach/io.h
@@ -20,8 +20,6 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#define IO_SPACE_LIMIT 0xffffffff
-
#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)
diff --git a/arch/arm/mach-vt8500/include/mach/gpio.h b/arch/arm/mach-vt8500/include/mach/gpio.h
index 94ff276..40a8c17 100644
--- a/arch/arm/mach-vt8500/include/mach/gpio.h
+++ b/arch/arm/mach-vt8500/include/mach/gpio.h
@@ -1,6 +1 @@
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
+/* empty */
diff --git a/arch/arm/mach-vt8500/include/mach/io.h b/arch/arm/mach-vt8500/include/mach/io.h
index 9077239..46181ee 100644
--- a/arch/arm/mach-vt8500/include/mach/io.h
+++ b/arch/arm/mach-vt8500/include/mach/io.h
@@ -20,8 +20,6 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#define IO_SPACE_LIMIT 0xffff
-
#define __io(a) __typesafe_io((a) + 0xf0000000)
#define __mem_pci(a) (a)
diff --git a/arch/arm/mach-w90x900/include/mach/gpio.h b/arch/arm/mach-w90x900/include/mach/gpio.h
index 034da3e..5385a42 100644
--- a/arch/arm/mach-w90x900/include/mach/gpio.h
+++ b/arch/arm/mach-w90x900/include/mach/gpio.h
@@ -15,16 +15,12 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
static inline int gpio_to_irq(unsigned gpio)
{
return gpio;
}
+#define gpio_to_irq gpio_to_irq
static inline int irq_to_gpio(unsigned irq)
{
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 9ab5be0..67f75a0 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -822,7 +822,7 @@
REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \
ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
- ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX
+ ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK
default y
select OUTER_CACHE
select OUTER_CACHE_SYNC
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 9ecfdb5..3f9b998 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -16,9 +16,12 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/err.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
@@ -30,11 +33,19 @@
static uint32_t l2x0_way_mask; /* Bitmask of active ways */
static uint32_t l2x0_size;
+struct l2x0_regs l2x0_saved_regs;
+
+struct l2x0_of_data {
+ void (*setup)(const struct device_node *, __u32 *, __u32 *);
+ void (*save)(void);
+ void (*resume)(void);
+};
+
static inline void cache_wait_way(void __iomem *reg, unsigned long mask)
{
/* wait for cache operation by line or way to complete */
while (readl_relaxed(reg) & mask)
- ;
+ cpu_relax();
}
#ifdef CONFIG_CACHE_PL310
@@ -277,7 +288,7 @@
spin_unlock_irqrestore(&l2x0_lock, flags);
}
-static void __init l2x0_unlock(__u32 cache_id)
+static void l2x0_unlock(__u32 cache_id)
{
int lockregs;
int i;
@@ -353,6 +364,8 @@
/* l2x0 controller is disabled */
writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL);
+ l2x0_saved_regs.aux_ctrl = aux;
+
l2x0_inv_all();
/* enable L2X0 */
@@ -372,3 +385,202 @@
printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n",
ways, cache_id, aux, l2x0_size);
}
+
+#ifdef CONFIG_OF
+static void __init l2x0_of_setup(const struct device_node *np,
+ __u32 *aux_val, __u32 *aux_mask)
+{
+ u32 data[2] = { 0, 0 };
+ u32 tag = 0;
+ u32 dirty = 0;
+ u32 val = 0, mask = 0;
+
+ of_property_read_u32(np, "arm,tag-latency", &tag);
+ if (tag) {
+ mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK;
+ val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT;
+ }
+
+ of_property_read_u32_array(np, "arm,data-latency",
+ data, ARRAY_SIZE(data));
+ if (data[0] && data[1]) {
+ mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK |
+ L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK;
+ val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) |
+ ((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT);
+ }
+
+ of_property_read_u32(np, "arm,dirty-latency", &dirty);
+ if (dirty) {
+ mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK;
+ val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT;
+ }
+
+ *aux_val &= ~mask;
+ *aux_val |= val;
+ *aux_mask &= ~mask;
+}
+
+static void __init pl310_of_setup(const struct device_node *np,
+ __u32 *aux_val, __u32 *aux_mask)
+{
+ u32 data[3] = { 0, 0, 0 };
+ u32 tag[3] = { 0, 0, 0 };
+ u32 filter[2] = { 0, 0 };
+
+ of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag));
+ if (tag[0] && tag[1] && tag[2])
+ writel_relaxed(
+ ((tag[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) |
+ ((tag[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) |
+ ((tag[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT),
+ l2x0_base + L2X0_TAG_LATENCY_CTRL);
+
+ of_property_read_u32_array(np, "arm,data-latency",
+ data, ARRAY_SIZE(data));
+ if (data[0] && data[1] && data[2])
+ writel_relaxed(
+ ((data[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) |
+ ((data[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) |
+ ((data[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT),
+ l2x0_base + L2X0_DATA_LATENCY_CTRL);
+
+ of_property_read_u32_array(np, "arm,filter-ranges",
+ filter, ARRAY_SIZE(filter));
+ if (filter[1]) {
+ writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M),
+ l2x0_base + L2X0_ADDR_FILTER_END);
+ writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L2X0_ADDR_FILTER_EN,
+ l2x0_base + L2X0_ADDR_FILTER_START);
+ }
+}
+
+static void __init pl310_save(void)
+{
+ u32 l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) &
+ L2X0_CACHE_ID_RTL_MASK;
+
+ l2x0_saved_regs.tag_latency = readl_relaxed(l2x0_base +
+ L2X0_TAG_LATENCY_CTRL);
+ l2x0_saved_regs.data_latency = readl_relaxed(l2x0_base +
+ L2X0_DATA_LATENCY_CTRL);
+ l2x0_saved_regs.filter_end = readl_relaxed(l2x0_base +
+ L2X0_ADDR_FILTER_END);
+ l2x0_saved_regs.filter_start = readl_relaxed(l2x0_base +
+ L2X0_ADDR_FILTER_START);
+
+ if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) {
+ /*
+ * From r2p0, there is Prefetch offset/control register
+ */
+ l2x0_saved_regs.prefetch_ctrl = readl_relaxed(l2x0_base +
+ L2X0_PREFETCH_CTRL);
+ /*
+ * From r3p0, there is Power control register
+ */
+ if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0)
+ l2x0_saved_regs.pwr_ctrl = readl_relaxed(l2x0_base +
+ L2X0_POWER_CTRL);
+ }
+}
+
+static void l2x0_resume(void)
+{
+ if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
+ /* restore aux ctrl and enable l2 */
+ l2x0_unlock(readl_relaxed(l2x0_base + L2X0_CACHE_ID));
+
+ writel_relaxed(l2x0_saved_regs.aux_ctrl, l2x0_base +
+ L2X0_AUX_CTRL);
+
+ l2x0_inv_all();
+
+ writel_relaxed(1, l2x0_base + L2X0_CTRL);
+ }
+}
+
+static void pl310_resume(void)
+{
+ u32 l2x0_revision;
+
+ if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
+ /* restore pl310 setup */
+ writel_relaxed(l2x0_saved_regs.tag_latency,
+ l2x0_base + L2X0_TAG_LATENCY_CTRL);
+ writel_relaxed(l2x0_saved_regs.data_latency,
+ l2x0_base + L2X0_DATA_LATENCY_CTRL);
+ writel_relaxed(l2x0_saved_regs.filter_end,
+ l2x0_base + L2X0_ADDR_FILTER_END);
+ writel_relaxed(l2x0_saved_regs.filter_start,
+ l2x0_base + L2X0_ADDR_FILTER_START);
+
+ l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) &
+ L2X0_CACHE_ID_RTL_MASK;
+
+ if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) {
+ writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
+ l2x0_base + L2X0_PREFETCH_CTRL);
+ if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0)
+ writel_relaxed(l2x0_saved_regs.pwr_ctrl,
+ l2x0_base + L2X0_POWER_CTRL);
+ }
+ }
+
+ l2x0_resume();
+}
+
+static const struct l2x0_of_data pl310_data = {
+ pl310_of_setup,
+ pl310_save,
+ pl310_resume,
+};
+
+static const struct l2x0_of_data l2x0_data = {
+ l2x0_of_setup,
+ NULL,
+ l2x0_resume,
+};
+
+static const struct of_device_id l2x0_ids[] __initconst = {
+ { .compatible = "arm,pl310-cache", .data = (void *)&pl310_data },
+ { .compatible = "arm,l220-cache", .data = (void *)&l2x0_data },
+ { .compatible = "arm,l210-cache", .data = (void *)&l2x0_data },
+ {}
+};
+
+int __init l2x0_of_init(__u32 aux_val, __u32 aux_mask)
+{
+ struct device_node *np;
+ struct l2x0_of_data *data;
+ struct resource res;
+
+ np = of_find_matching_node(NULL, l2x0_ids);
+ if (!np)
+ return -ENODEV;
+
+ if (of_address_to_resource(np, 0, &res))
+ return -ENODEV;
+
+ l2x0_base = ioremap(res.start, resource_size(&res));
+ if (!l2x0_base)
+ return -ENOMEM;
+
+ l2x0_saved_regs.phy_base = res.start;
+
+ data = of_match_node(l2x0_ids, np)->data;
+
+ /* L2 configuration can only be changed if the cache is disabled */
+ if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
+ if (data->setup)
+ data->setup(np, &aux_val, &aux_mask);
+ }
+
+ if (data->save)
+ data->save();
+
+ l2x0_init(l2x0_base, aux_val, aux_mask);
+
+ outer_cache.resume = data->resume;
+ return 0;
+}
+#endif
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 34409a0..04e9a92 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -496,6 +496,13 @@
*/
bank_start = min(bank_start,
ALIGN(prev_bank_end, PAGES_PER_SECTION));
+#else
+ /*
+ * Align down here since the VM subsystem insists that the
+ * memmap entries are valid from the bank start aligned to
+ * MAX_ORDER_NR_PAGES.
+ */
+ bank_start = round_down(bank_start, MAX_ORDER_NR_PAGES);
#endif
/*
* If we had a previous bank, and there is a space
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 6a7d993..83b745a 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -65,6 +65,8 @@
unsigned long ckih1, unsigned long ckih2);
extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
+extern int mx51_clocks_init_dt(void);
+extern int mx53_clocks_init_dt(void);
extern int mx6q_clocks_init(void);
extern struct platform_device *mxc_register_gpio(char *name, int id,
resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
@@ -124,6 +126,11 @@
extern void imx_gpc_init(void);
extern void imx_gpc_pre_suspend(void);
extern void imx_gpc_post_resume(void);
+extern void imx51_babbage_common_init(void);
+extern void imx53_ard_common_init(void);
+extern void imx53_evk_common_init(void);
+extern void imx53_qsb_common_init(void);
+extern void imx53_smd_common_init(void);
extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
extern void imx6q_pm_init(void);
#endif
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index 44af006..40a8c17 100644
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -1,32 +1 @@
-/*
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_GPIO_H__
-#define __ASM_ARCH_MXC_GPIO_H__
-
-#include <linux/spinlock.h>
-#include <mach/hardware.h>
-#include <asm-generic/gpio.h>
-
-/* use gpiolib dispatchers */
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
-#endif
+/* empty */
diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
similarity index 81%
rename from arch/arm/plat-nomadik/include/plat/gpio.h
rename to arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
index d5d7e65..3ba4d8f 100644
--- a/arch/arm/plat-nomadik/include/plat/gpio.h
+++ b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
@@ -9,20 +9,9 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#ifndef __ASM_PLAT_GPIO_H
-#define __ASM_PLAT_GPIO_H
-#include <asm-generic/gpio.h>
-
-/*
- * These currently cause a function call to happen, they may be optimized
- * if needed by adding cpu-specific defines to identify blocks
- * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc)
- */
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
+#ifndef __PLAT_NOMADIK_GPIO
+#define __PLAT_NOMADIK_GPIO
/*
* "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
@@ -93,4 +82,4 @@
bool supports_sleepmode;
};
-#endif /* __ASM_PLAT_GPIO_H */
+#endif /* __PLAT_NOMADIK_GPIO */
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index 923c962..caa1f7b 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -8,7 +8,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -18,7 +18,6 @@
#include <mach/hardware.h>
#include <plat/board.h>
-#include <mach/gpio.h>
/* Many OMAP development platforms reuse the same "debug board"; these
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index fc05b10..61a1ec2 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -7,7 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
@@ -19,7 +19,6 @@
#include <asm/mach-types.h>
#include <plat/fpga.h>
-#include <mach/gpio.h>
/* Many OMAP development platforms reuse the same "debug board"; these
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index ea28f98..acd132c 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -8,7 +8,7 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -24,56 +24,9 @@
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mmc.h>
-#include <mach/gpio.h>
#include <plat/menelaus.h>
-#include <plat/mcbsp.h>
#include <plat/omap44xx.h>
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_OMAP_MCBSP) || defined(CONFIG_OMAP_MCBSP_MODULE)
-
-static struct platform_device **omap_mcbsp_devices;
-
-void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
- struct omap_mcbsp_platform_data *config, int size)
-{
- int i;
-
- omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
- GFP_KERNEL);
- if (!omap_mcbsp_devices) {
- printk(KERN_ERR "Could not register McBSP devices\n");
- return;
- }
-
- for (i = 0; i < size; i++) {
- struct platform_device *new_mcbsp;
- int ret;
-
- new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
- if (!new_mcbsp)
- continue;
- platform_device_add_resources(new_mcbsp, &res[i * res_count],
- res_count);
- new_mcbsp->dev.platform_data = &config[i];
- ret = platform_device_add(new_mcbsp);
- if (ret) {
- platform_device_put(new_mcbsp);
- continue;
- }
- omap_mcbsp_devices[i] = new_mcbsp;
- }
-}
-
-#else
-void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
- struct omap_mcbsp_platform_data *config, int size)
-{ }
-#endif
-
-/*-------------------------------------------------------------------------*/
-
#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 75a847d..de7896f 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -3,6 +3,12 @@
*
* OMAP Dual-Mode Timers
*
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Tarun Kanti DebBarma <tarun.kanti@ti.com>
+ * Thara Gopinath <thara@ti.com>
+ *
+ * dmtimer adaptation to platform_driver.
+ *
* Copyright (C) 2005 Nokia Corporation
* OMAP2 support by Juha Yrjola
* API improvements and OMAP2 clock framework support by Timo Teras
@@ -29,168 +35,80 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
#include <linux/io.h>
-#include <linux/module.h>
-#include <mach/hardware.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
+
#include <plat/dmtimer.h>
-#include <mach/irqs.h>
-static int dm_timer_count;
+static LIST_HEAD(omap_timer_list);
+static DEFINE_SPINLOCK(dm_timer_lock);
-#ifdef CONFIG_ARCH_OMAP1
-static struct omap_dm_timer omap1_dm_timers[] = {
- { .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 },
- { .phys_base = 0xfffb1c00, .irq = INT_1610_GPTIMER2 },
- { .phys_base = 0xfffb2400, .irq = INT_1610_GPTIMER3 },
- { .phys_base = 0xfffb2c00, .irq = INT_1610_GPTIMER4 },
- { .phys_base = 0xfffb3400, .irq = INT_1610_GPTIMER5 },
- { .phys_base = 0xfffb3c00, .irq = INT_1610_GPTIMER6 },
- { .phys_base = 0xfffb7400, .irq = INT_1610_GPTIMER7 },
- { .phys_base = 0xfffbd400, .irq = INT_1610_GPTIMER8 },
-};
-
-static const int omap1_dm_timer_count = ARRAY_SIZE(omap1_dm_timers);
-
-#else
-#define omap1_dm_timers NULL
-#define omap1_dm_timer_count 0
-#endif /* CONFIG_ARCH_OMAP1 */
-
-#ifdef CONFIG_ARCH_OMAP2
-static struct omap_dm_timer omap2_dm_timers[] = {
- { .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 },
- { .phys_base = 0x4802a000, .irq = INT_24XX_GPTIMER2 },
- { .phys_base = 0x48078000, .irq = INT_24XX_GPTIMER3 },
- { .phys_base = 0x4807a000, .irq = INT_24XX_GPTIMER4 },
- { .phys_base = 0x4807c000, .irq = INT_24XX_GPTIMER5 },
- { .phys_base = 0x4807e000, .irq = INT_24XX_GPTIMER6 },
- { .phys_base = 0x48080000, .irq = INT_24XX_GPTIMER7 },
- { .phys_base = 0x48082000, .irq = INT_24XX_GPTIMER8 },
- { .phys_base = 0x48084000, .irq = INT_24XX_GPTIMER9 },
- { .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 },
- { .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 },
- { .phys_base = 0x4808a000, .irq = INT_24XX_GPTIMER12 },
-};
-
-static const char *omap2_dm_source_names[] __initdata = {
- "sys_ck",
- "func_32k_ck",
- "alt_ck",
- NULL
-};
-
-static struct clk *omap2_dm_source_clocks[3];
-static const int omap2_dm_timer_count = ARRAY_SIZE(omap2_dm_timers);
-
-#else
-#define omap2_dm_timers NULL
-#define omap2_dm_timer_count 0
-#define omap2_dm_source_names NULL
-#define omap2_dm_source_clocks NULL
-#endif /* CONFIG_ARCH_OMAP2 */
-
-#ifdef CONFIG_ARCH_OMAP3
-static struct omap_dm_timer omap3_dm_timers[] = {
- { .phys_base = 0x48318000, .irq = INT_24XX_GPTIMER1 },
- { .phys_base = 0x49032000, .irq = INT_24XX_GPTIMER2 },
- { .phys_base = 0x49034000, .irq = INT_24XX_GPTIMER3 },
- { .phys_base = 0x49036000, .irq = INT_24XX_GPTIMER4 },
- { .phys_base = 0x49038000, .irq = INT_24XX_GPTIMER5 },
- { .phys_base = 0x4903A000, .irq = INT_24XX_GPTIMER6 },
- { .phys_base = 0x4903C000, .irq = INT_24XX_GPTIMER7 },
- { .phys_base = 0x4903E000, .irq = INT_24XX_GPTIMER8 },
- { .phys_base = 0x49040000, .irq = INT_24XX_GPTIMER9 },
- { .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 },
- { .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 },
- { .phys_base = 0x48304000, .irq = INT_34XX_GPT12_IRQ },
-};
-
-static const char *omap3_dm_source_names[] __initdata = {
- "sys_ck",
- "omap_32k_fck",
- NULL
-};
-
-static struct clk *omap3_dm_source_clocks[2];
-static const int omap3_dm_timer_count = ARRAY_SIZE(omap3_dm_timers);
-
-#else
-#define omap3_dm_timers NULL
-#define omap3_dm_timer_count 0
-#define omap3_dm_source_names NULL
-#define omap3_dm_source_clocks NULL
-#endif /* CONFIG_ARCH_OMAP3 */
-
-#ifdef CONFIG_ARCH_OMAP4
-static struct omap_dm_timer omap4_dm_timers[] = {
- { .phys_base = 0x4a318000, .irq = OMAP44XX_IRQ_GPT1 },
- { .phys_base = 0x48032000, .irq = OMAP44XX_IRQ_GPT2 },
- { .phys_base = 0x48034000, .irq = OMAP44XX_IRQ_GPT3 },
- { .phys_base = 0x48036000, .irq = OMAP44XX_IRQ_GPT4 },
- { .phys_base = 0x40138000, .irq = OMAP44XX_IRQ_GPT5 },
- { .phys_base = 0x4013a000, .irq = OMAP44XX_IRQ_GPT6 },
- { .phys_base = 0x4013a000, .irq = OMAP44XX_IRQ_GPT7 },
- { .phys_base = 0x4013e000, .irq = OMAP44XX_IRQ_GPT8 },
- { .phys_base = 0x4803e000, .irq = OMAP44XX_IRQ_GPT9 },
- { .phys_base = 0x48086000, .irq = OMAP44XX_IRQ_GPT10 },
- { .phys_base = 0x48088000, .irq = OMAP44XX_IRQ_GPT11 },
- { .phys_base = 0x4a320000, .irq = OMAP44XX_IRQ_GPT12 },
-};
-static const char *omap4_dm_source_names[] __initdata = {
- "sys_clkin_ck",
- "sys_32k_ck",
- NULL
-};
-static struct clk *omap4_dm_source_clocks[2];
-static const int omap4_dm_timer_count = ARRAY_SIZE(omap4_dm_timers);
-
-#else
-#define omap4_dm_timers NULL
-#define omap4_dm_timer_count 0
-#define omap4_dm_source_names NULL
-#define omap4_dm_source_clocks NULL
-#endif /* CONFIG_ARCH_OMAP4 */
-
-static struct omap_dm_timer *dm_timers;
-static const char **dm_source_names;
-static struct clk **dm_source_clocks;
-
-static spinlock_t dm_timer_lock;
-
-/*
- * Reads timer registers in posted and non-posted mode. The posted mode bit
- * is encoded in reg. Note that in posted mode write pending bit must be
- * checked. Otherwise a read of a non completed write will produce an error.
+/**
+ * omap_dm_timer_read_reg - read timer registers in posted and non-posted mode
+ * @timer: timer pointer over which read operation to perform
+ * @reg: lowest byte holds the register offset
+ *
+ * The posted mode bit is encoded in reg. Note that in posted mode write
+ * pending bit must be checked. Otherwise a read of a non completed write
+ * will produce an error.
*/
static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, u32 reg)
{
- return __omap_dm_timer_read(timer->io_base, reg, timer->posted);
+ WARN_ON((reg & 0xff) < _OMAP_TIMER_WAKEUP_EN_OFFSET);
+ return __omap_dm_timer_read(timer, reg, timer->posted);
}
-/*
- * Writes timer registers in posted and non-posted mode. The posted mode bit
- * is encoded in reg. Note that in posted mode the write pending bit must be
- * checked. Otherwise a write on a register which has a pending write will be
- * lost.
+/**
+ * omap_dm_timer_write_reg - write timer registers in posted and non-posted mode
+ * @timer: timer pointer over which write operation is to perform
+ * @reg: lowest byte holds the register offset
+ * @value: data to write into the register
+ *
+ * The posted mode bit is encoded in reg. Note that in posted mode the write
+ * pending bit must be checked. Otherwise a write on a register which has a
+ * pending write will be lost.
*/
static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg,
u32 value)
{
- __omap_dm_timer_write(timer->io_base, reg, value, timer->posted);
+ WARN_ON((reg & 0xff) < _OMAP_TIMER_WAKEUP_EN_OFFSET);
+ __omap_dm_timer_write(timer, reg, value, timer->posted);
+}
+
+static void omap_timer_restore_context(struct omap_dm_timer *timer)
+{
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_OFFSET,
+ timer->context.tiocp_cfg);
+ if (timer->revision > 1)
+ __raw_writel(timer->context.tistat, timer->sys_stat);
+
+ __raw_writel(timer->context.tisr, timer->irq_stat);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG,
+ timer->context.twer);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG,
+ timer->context.tcrr);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG,
+ timer->context.tldr);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG,
+ timer->context.tmar);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG,
+ timer->context.tsicr);
+ __raw_writel(timer->context.tier, timer->irq_ena);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG,
+ timer->context.tclr);
}
static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer)
{
int c;
+ if (!timer->sys_stat)
+ return;
+
c = 0;
- while (!(omap_dm_timer_read_reg(timer, OMAP_TIMER_SYS_STAT_REG) & 1)) {
+ while (!(__raw_readl(timer->sys_stat) & 1)) {
c++;
if (c > 100000) {
printk(KERN_ERR "Timer failed to reset\n");
@@ -201,53 +119,65 @@
static void omap_dm_timer_reset(struct omap_dm_timer *timer)
{
- int autoidle = 0, wakeup = 0;
-
- if (!cpu_class_is_omap2() || timer != &dm_timers[0]) {
+ omap_dm_timer_enable(timer);
+ if (timer->pdev->id != 1) {
omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
omap_dm_timer_wait_for_reset(timer);
}
- omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
- /* Enable autoidle on OMAP2+ */
- if (cpu_class_is_omap2())
- autoidle = 1;
-
- /*
- * Enable wake-up on OMAP2 CPUs.
- */
- if (cpu_class_is_omap2())
- wakeup = 1;
-
- __omap_dm_timer_reset(timer->io_base, autoidle, wakeup);
+ __omap_dm_timer_reset(timer, 0, 0);
+ omap_dm_timer_disable(timer);
timer->posted = 1;
}
-void omap_dm_timer_prepare(struct omap_dm_timer *timer)
+int omap_dm_timer_prepare(struct omap_dm_timer *timer)
{
- omap_dm_timer_enable(timer);
- omap_dm_timer_reset(timer);
+ struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data;
+ int ret;
+
+ timer->fclk = clk_get(&timer->pdev->dev, "fck");
+ if (WARN_ON_ONCE(IS_ERR_OR_NULL(timer->fclk))) {
+ timer->fclk = NULL;
+ dev_err(&timer->pdev->dev, ": No fclk handle.\n");
+ return -EINVAL;
+ }
+
+ if (pdata->needs_manual_reset)
+ omap_dm_timer_reset(timer);
+
+ ret = omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
+
+ timer->posted = 1;
+ return ret;
}
struct omap_dm_timer *omap_dm_timer_request(void)
{
- struct omap_dm_timer *timer = NULL;
+ struct omap_dm_timer *timer = NULL, *t;
unsigned long flags;
- int i;
+ int ret = 0;
spin_lock_irqsave(&dm_timer_lock, flags);
- for (i = 0; i < dm_timer_count; i++) {
- if (dm_timers[i].reserved)
+ list_for_each_entry(t, &omap_timer_list, node) {
+ if (t->reserved)
continue;
- timer = &dm_timers[i];
+ timer = t;
timer->reserved = 1;
break;
}
+
+ if (timer) {
+ ret = omap_dm_timer_prepare(timer);
+ if (ret) {
+ timer->reserved = 0;
+ timer = NULL;
+ }
+ }
spin_unlock_irqrestore(&dm_timer_lock, flags);
- if (timer != NULL)
- omap_dm_timer_prepare(timer);
+ if (!timer)
+ pr_debug("%s: timer request failed!\n", __func__);
return timer;
}
@@ -255,74 +185,65 @@
struct omap_dm_timer *omap_dm_timer_request_specific(int id)
{
- struct omap_dm_timer *timer;
+ struct omap_dm_timer *timer = NULL, *t;
unsigned long flags;
+ int ret = 0;
spin_lock_irqsave(&dm_timer_lock, flags);
- if (id <= 0 || id > dm_timer_count || dm_timers[id-1].reserved) {
- spin_unlock_irqrestore(&dm_timer_lock, flags);
- printk("BUG: warning at %s:%d/%s(): unable to get timer %d\n",
- __FILE__, __LINE__, __func__, id);
- dump_stack();
- return NULL;
+ list_for_each_entry(t, &omap_timer_list, node) {
+ if (t->pdev->id == id && !t->reserved) {
+ timer = t;
+ timer->reserved = 1;
+ break;
+ }
}
- timer = &dm_timers[id-1];
- timer->reserved = 1;
+ if (timer) {
+ ret = omap_dm_timer_prepare(timer);
+ if (ret) {
+ timer->reserved = 0;
+ timer = NULL;
+ }
+ }
spin_unlock_irqrestore(&dm_timer_lock, flags);
- omap_dm_timer_prepare(timer);
+ if (!timer)
+ pr_debug("%s: timer%d request failed!\n", __func__, id);
return timer;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific);
-void omap_dm_timer_free(struct omap_dm_timer *timer)
+int omap_dm_timer_free(struct omap_dm_timer *timer)
{
- omap_dm_timer_enable(timer);
- omap_dm_timer_reset(timer);
- omap_dm_timer_disable(timer);
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ clk_put(timer->fclk);
WARN_ON(!timer->reserved);
timer->reserved = 0;
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_free);
void omap_dm_timer_enable(struct omap_dm_timer *timer)
{
- if (timer->enabled)
- return;
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
- if (cpu_class_is_omap2()) {
- clk_enable(timer->fclk);
- clk_enable(timer->iclk);
- }
-#endif
-
- timer->enabled = 1;
+ pm_runtime_get_sync(&timer->pdev->dev);
}
EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
void omap_dm_timer_disable(struct omap_dm_timer *timer)
{
- if (!timer->enabled)
- return;
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
- if (cpu_class_is_omap2()) {
- clk_disable(timer->iclk);
- clk_disable(timer->fclk);
- }
-#endif
-
- timer->enabled = 0;
+ pm_runtime_put(&timer->pdev->dev);
}
EXPORT_SYMBOL_GPL(omap_dm_timer_disable);
int omap_dm_timer_get_irq(struct omap_dm_timer *timer)
{
- return timer->irq;
+ if (timer)
+ return timer->irq;
+ return -EINVAL;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq);
@@ -334,24 +255,29 @@
*/
__u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
{
- int i;
+ int i = 0;
+ struct omap_dm_timer *timer = NULL;
+ unsigned long flags;
/* If ARMXOR cannot be idled this function call is unnecessary */
if (!(inputmask & (1 << 1)))
return inputmask;
/* If any active timer is using ARMXOR return modified mask */
- for (i = 0; i < dm_timer_count; i++) {
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ list_for_each_entry(timer, &omap_timer_list, node) {
u32 l;
- l = omap_dm_timer_read_reg(&dm_timers[i], OMAP_TIMER_CTRL_REG);
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
if (l & OMAP_TIMER_CTRL_ST) {
if (((omap_readl(MOD_CONF_CTRL_1) >> (i * 2)) & 0x03) == 0)
inputmask &= ~(1 << 1);
else
inputmask &= ~(1 << 2);
}
+ i++;
}
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
return inputmask;
}
@@ -361,7 +287,9 @@
struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
{
- return timer->fclk;
+ if (timer)
+ return timer->fclk;
+ return NULL;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_get_fclk);
@@ -375,70 +303,91 @@
#endif
-void omap_dm_timer_trigger(struct omap_dm_timer *timer)
+int omap_dm_timer_trigger(struct omap_dm_timer *timer)
{
+ if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
+ pr_err("%s: timer not available or enabled.\n", __func__);
+ return -EINVAL;
+ }
+
omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_trigger);
-void omap_dm_timer_start(struct omap_dm_timer *timer)
+int omap_dm_timer_start(struct omap_dm_timer *timer)
{
u32 l;
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
+
+ if (timer->loses_context) {
+ u32 ctx_loss_cnt_after =
+ timer->get_context_loss_count(&timer->pdev->dev);
+ if (ctx_loss_cnt_after != timer->ctx_loss_count)
+ omap_timer_restore_context(timer);
+ }
+
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
if (!(l & OMAP_TIMER_CTRL_ST)) {
l |= OMAP_TIMER_CTRL_ST;
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
}
+
+ /* Save the context */
+ timer->context.tclr = l;
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_start);
-void omap_dm_timer_stop(struct omap_dm_timer *timer)
+int omap_dm_timer_stop(struct omap_dm_timer *timer)
{
unsigned long rate = 0;
+ struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data;
-#ifdef CONFIG_ARCH_OMAP2PLUS
- rate = clk_get_rate(timer->fclk);
-#endif
+ if (unlikely(!timer))
+ return -EINVAL;
- __omap_dm_timer_stop(timer->io_base, timer->posted, rate);
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
+ if (!pdata->needs_manual_reset)
+ rate = clk_get_rate(timer->fclk);
-#ifdef CONFIG_ARCH_OMAP1
-
-int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
-{
- int n = (timer - dm_timers) << 1;
- u32 l;
-
- l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
- l |= source << n;
- omap_writel(l, MOD_CONF_CTRL_1);
+ __omap_dm_timer_stop(timer, timer->posted, rate);
return 0;
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
-
-#else
+EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
{
+ int ret;
+ struct dmtimer_platform_data *pdata;
+
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ pdata = timer->pdev->dev.platform_data;
+
if (source < 0 || source >= 3)
return -EINVAL;
- return __omap_dm_timer_set_source(timer->fclk,
- dm_source_clocks[source]);
+ ret = pdata->set_timer_src(timer->pdev, source);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
-#endif
-
-void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
+int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
unsigned int load)
{
u32 l;
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
if (autoreload)
l |= OMAP_TIMER_CTRL_AR;
@@ -448,15 +397,32 @@
omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
+ /* Save the context */
+ timer->context.tclr = l;
+ timer->context.tldr = load;
+ omap_dm_timer_disable(timer);
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_load);
/* Optimized set_load which removes costly spin wait in timer_start */
-void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
+int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
unsigned int load)
{
u32 l;
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
+
+ if (timer->loses_context) {
+ u32 ctx_loss_cnt_after =
+ timer->get_context_loss_count(&timer->pdev->dev);
+ if (ctx_loss_cnt_after != timer->ctx_loss_count)
+ omap_timer_restore_context(timer);
+ }
+
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
if (autoreload) {
l |= OMAP_TIMER_CTRL_AR;
@@ -466,15 +432,25 @@
}
l |= OMAP_TIMER_CTRL_ST;
- __omap_dm_timer_load_start(timer->io_base, l, load, timer->posted);
+ __omap_dm_timer_load_start(timer, l, load, timer->posted);
+
+ /* Save the context */
+ timer->context.tclr = l;
+ timer->context.tldr = load;
+ timer->context.tcrr = load;
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_load_start);
-void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
+int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
unsigned int match)
{
u32 l;
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
if (enable)
l |= OMAP_TIMER_CTRL_CE;
@@ -482,14 +458,24 @@
l &= ~OMAP_TIMER_CTRL_CE;
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match);
+
+ /* Save the context */
+ timer->context.tclr = l;
+ timer->context.tmar = match;
+ omap_dm_timer_disable(timer);
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_match);
-void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
+int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
int toggle, int trigger)
{
u32 l;
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
l &= ~(OMAP_TIMER_CTRL_GPOCFG | OMAP_TIMER_CTRL_SCPWM |
OMAP_TIMER_CTRL_PT | (0x03 << 10));
@@ -499,13 +485,22 @@
l |= OMAP_TIMER_CTRL_PT;
l |= trigger << 10;
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+
+ /* Save the context */
+ timer->context.tclr = l;
+ omap_dm_timer_disable(timer);
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_pwm);
-void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler)
+int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler)
{
u32 l;
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
l &= ~(OMAP_TIMER_CTRL_PRE | (0x07 << 2));
if (prescaler >= 0x00 && prescaler <= 0x07) {
@@ -513,13 +508,28 @@
l |= prescaler << 2;
}
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+
+ /* Save the context */
+ timer->context.tclr = l;
+ omap_dm_timer_disable(timer);
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_prescaler);
-void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
+int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
unsigned int value)
{
- __omap_dm_timer_int_enable(timer->io_base, value);
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
+ __omap_dm_timer_int_enable(timer, value);
+
+ /* Save the context */
+ timer->context.tier = value;
+ timer->context.twer = value;
+ omap_dm_timer_disable(timer);
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable);
@@ -527,40 +537,61 @@
{
unsigned int l;
- l = omap_dm_timer_read_reg(timer, OMAP_TIMER_STAT_REG);
+ if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
+ pr_err("%s: timer not available or enabled.\n", __func__);
+ return 0;
+ }
+
+ l = __raw_readl(timer->irq_stat);
return l;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_read_status);
-void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
+int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
{
- __omap_dm_timer_write_status(timer->io_base, value);
+ if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev)))
+ return -EINVAL;
+
+ __omap_dm_timer_write_status(timer, value);
+ /* Save the context */
+ timer->context.tisr = value;
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_write_status);
unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
{
- return __omap_dm_timer_read_counter(timer->io_base, timer->posted);
+ if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
+ pr_err("%s: timer not iavailable or enabled.\n", __func__);
+ return 0;
+ }
+
+ return __omap_dm_timer_read_counter(timer, timer->posted);
}
EXPORT_SYMBOL_GPL(omap_dm_timer_read_counter);
-void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
+int omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
{
+ if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
+ pr_err("%s: timer not available or enabled.\n", __func__);
+ return -EINVAL;
+ }
+
omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, value);
+
+ /* Save the context */
+ timer->context.tcrr = value;
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_write_counter);
int omap_dm_timers_active(void)
{
- int i;
+ struct omap_dm_timer *timer;
- for (i = 0; i < dm_timer_count; i++) {
- struct omap_dm_timer *timer;
-
- timer = &dm_timers[i];
-
- if (!timer->enabled)
+ list_for_each_entry(timer, &omap_timer_list, node) {
+ if (!timer->reserved)
continue;
if (omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG) &
@@ -572,69 +603,147 @@
}
EXPORT_SYMBOL_GPL(omap_dm_timers_active);
-static int __init omap_dm_timer_init(void)
+/**
+ * omap_dm_timer_probe - probe function called for every registered device
+ * @pdev: pointer to current timer platform device
+ *
+ * Called by driver framework at the end of device registration for all
+ * timer devices.
+ */
+static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
{
+ int ret;
+ unsigned long flags;
struct omap_dm_timer *timer;
- int i, map_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */
+ struct resource *mem, *irq, *ioarea;
+ struct dmtimer_platform_data *pdata = pdev->dev.platform_data;
- if (!(cpu_is_omap16xx() || cpu_class_is_omap2()))
+ if (!pdata) {
+ dev_err(&pdev->dev, "%s: no platform data.\n", __func__);
return -ENODEV;
-
- spin_lock_init(&dm_timer_lock);
-
- if (cpu_class_is_omap1()) {
- dm_timers = omap1_dm_timers;
- dm_timer_count = omap1_dm_timer_count;
- map_size = SZ_2K;
- } else if (cpu_is_omap24xx()) {
- dm_timers = omap2_dm_timers;
- dm_timer_count = omap2_dm_timer_count;
- dm_source_names = omap2_dm_source_names;
- dm_source_clocks = omap2_dm_source_clocks;
- } else if (cpu_is_omap34xx()) {
- dm_timers = omap3_dm_timers;
- dm_timer_count = omap3_dm_timer_count;
- dm_source_names = omap3_dm_source_names;
- dm_source_clocks = omap3_dm_source_clocks;
- } else if (cpu_is_omap44xx()) {
- dm_timers = omap4_dm_timers;
- dm_timer_count = omap4_dm_timer_count;
- dm_source_names = omap4_dm_source_names;
- dm_source_clocks = omap4_dm_source_clocks;
}
- if (cpu_class_is_omap2())
- for (i = 0; dm_source_names[i] != NULL; i++)
- dm_source_clocks[i] = clk_get(NULL, dm_source_names[i]);
-
- if (cpu_is_omap243x())
- dm_timers[0].phys_base = 0x49018000;
-
- for (i = 0; i < dm_timer_count; i++) {
- timer = &dm_timers[i];
-
- /* Static mapping, never released */
- timer->io_base = ioremap(timer->phys_base, map_size);
- BUG_ON(!timer->io_base);
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
- if (cpu_class_is_omap2()) {
- char clk_name[16];
- sprintf(clk_name, "gpt%d_ick", i + 1);
- timer->iclk = clk_get(NULL, clk_name);
- sprintf(clk_name, "gpt%d_fck", i + 1);
- timer->fclk = clk_get(NULL, clk_name);
- }
-
- /* One or two timers may be set up early for sys_timer */
- if (sys_timer_reserved & (1 << i)) {
- timer->reserved = 1;
- timer->posted = 1;
- }
-#endif
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (unlikely(!irq)) {
+ dev_err(&pdev->dev, "%s: no IRQ resource.\n", __func__);
+ return -ENODEV;
}
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(!mem)) {
+ dev_err(&pdev->dev, "%s: no memory resource.\n", __func__);
+ return -ENODEV;
+ }
+
+ ioarea = request_mem_region(mem->start, resource_size(mem),
+ pdev->name);
+ if (!ioarea) {
+ dev_err(&pdev->dev, "%s: region already claimed.\n", __func__);
+ return -EBUSY;
+ }
+
+ timer = kzalloc(sizeof(struct omap_dm_timer), GFP_KERNEL);
+ if (!timer) {
+ dev_err(&pdev->dev, "%s: no memory for omap_dm_timer.\n",
+ __func__);
+ ret = -ENOMEM;
+ goto err_free_ioregion;
+ }
+
+ timer->io_base = ioremap(mem->start, resource_size(mem));
+ if (!timer->io_base) {
+ dev_err(&pdev->dev, "%s: ioremap failed.\n", __func__);
+ ret = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ timer->id = pdev->id;
+ timer->irq = irq->start;
+ timer->reserved = pdata->reserved;
+ timer->pdev = pdev;
+ timer->loses_context = pdata->loses_context;
+ timer->get_context_loss_count = pdata->get_context_loss_count;
+
+ /* Skip pm_runtime_enable for OMAP1 */
+ if (!pdata->needs_manual_reset) {
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_irq_safe(&pdev->dev);
+ }
+
+ if (!timer->reserved) {
+ pm_runtime_get_sync(&pdev->dev);
+ __omap_dm_timer_init_regs(timer);
+ pm_runtime_put(&pdev->dev);
+ }
+
+ /* add the timer element to the list */
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ list_add_tail(&timer->node, &omap_timer_list);
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+ dev_dbg(&pdev->dev, "Device Probed.\n");
+
return 0;
+
+err_free_mem:
+ kfree(timer);
+
+err_free_ioregion:
+ release_mem_region(mem->start, resource_size(mem));
+
+ return ret;
}
-arch_initcall(omap_dm_timer_init);
+/**
+ * omap_dm_timer_remove - cleanup a registered timer device
+ * @pdev: pointer to current timer platform device
+ *
+ * Called by driver framework whenever a timer device is unregistered.
+ * In addition to freeing platform resources it also deletes the timer
+ * entry from the local list.
+ */
+static int __devexit omap_dm_timer_remove(struct platform_device *pdev)
+{
+ struct omap_dm_timer *timer;
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ list_for_each_entry(timer, &omap_timer_list, node)
+ if (timer->pdev->id == pdev->id) {
+ list_del(&timer->node);
+ kfree(timer);
+ ret = 0;
+ break;
+ }
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+ return ret;
+}
+
+static struct platform_driver omap_dm_timer_driver = {
+ .probe = omap_dm_timer_probe,
+ .remove = omap_dm_timer_remove,
+ .driver = {
+ .name = "omap_timer",
+ },
+};
+
+static int __init omap_dm_timer_driver_init(void)
+{
+ return platform_driver_register(&omap_dm_timer_driver);
+}
+
+static void __exit omap_dm_timer_driver_exit(void)
+{
+ platform_driver_unregister(&omap_dm_timer_driver);
+}
+
+early_platform_init("earlytimer", &omap_dm_timer_driver);
+module_init(omap_dm_timer_driver_init);
+module_exit(omap_dm_timer_driver_exit);
+
+MODULE_DESCRIPTION("OMAP Dual-Mode Timer Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_AUTHOR("Texas Instruments Inc");
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 3341ca4..c20beb8 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -123,19 +123,11 @@
omap_pm_set_max_mpu_wakeup_lat(dev, t);
}
-static struct omap_device_pm_latency omap_i2c_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static inline int omap2_i2c_add_bus(int bus_id)
{
int l;
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN];
struct omap_i2c_bus_platform_data *pdata;
@@ -160,12 +152,12 @@
*/
if (cpu_is_omap34xx())
pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
- od = omap_device_build(name, bus_id, oh, pdata,
+ pdev = omap_device_build(name, bus_id, oh, pdata,
sizeof(struct omap_i2c_bus_platform_data),
- omap_i2c_latency, ARRAY_SIZE(omap_i2c_latency), 0);
- WARN(IS_ERR(od), "Could not build omap_device for %s\n", name);
+ NULL, 0, 0);
+ WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
- return PTR_ERR(od);
+ return PTR_ERR(pdev);
}
#else
static inline int omap2_i2c_add_bus(int bus_id)
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index df4b968..197ca03 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -80,8 +80,6 @@
*
* @div is the divisor that should be applied to the parent clock's rate
* to produce the current clock's rate.
- *
- * XXX @flags probably should be replaced with an struct omap_chip.
*/
struct clksel_rate {
u32 val;
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index 4564cc6..abda2c7 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -45,6 +45,15 @@
extern void omap_reserve(void);
+void omap2420_init_early(void);
+void omap2430_init_early(void);
+void omap3430_init_early(void);
+void omap35xx_init_early(void);
+void omap3630_init_early(void);
+void am35xx_init_early(void);
+void ti816x_init_early(void);
+void omap4430_init_early(void);
+
/*
* IO bases for various OMAP processors
* Except the tap base, rest all the io bases
@@ -74,7 +83,11 @@
void omap2_set_globals_control(struct omap_globals *);
void omap2_set_globals_prcm(struct omap_globals *);
+void omap242x_map_io(void);
+void omap243x_map_io(void);
void omap3_map_io(void);
+void omap4_map_io(void);
+
/**
* omap_test_timeout - busy-loop, testing a condition
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 67b3d75..2f90269 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -44,13 +44,6 @@
int omap_type(void);
-struct omap_chip_id {
- u16 oc;
- u8 type;
-};
-
-#define OMAP_CHIP_INIT(x) { .oc = x }
-
/*
* omap_rev bits:
* CPU id bits (0730, 1510, 1710, 2422...) [31:16]
@@ -60,19 +53,6 @@
unsigned int omap_rev(void);
/*
- * Define CPU revision bits
- *
- * Verbose meaning of the revision bits may be different for a silicon
- * family. This difference can be handled separately.
- */
-#define OMAP_REVBITS_00 0x00
-#define OMAP_REVBITS_01 0x01
-#define OMAP_REVBITS_02 0x02
-#define OMAP_REVBITS_03 0x03
-#define OMAP_REVBITS_04 0x04
-#define OMAP_REVBITS_05 0x05
-
-/*
* Get the CPU revision for OMAP devices
*/
#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff)
@@ -262,7 +242,7 @@
IS_OMAP_TYPE(2423, 0x2423)
IS_OMAP_TYPE(2430, 0x2430)
IS_OMAP_TYPE(3430, 0x3430)
-IS_OMAP_TYPE(3505, 0x3505)
+IS_OMAP_TYPE(3505, 0x3517)
IS_OMAP_TYPE(3517, 0x3517)
#define cpu_is_omap310() 0
@@ -354,8 +334,9 @@
(!omap3_has_sgx()) && \
(omap3_has_iva()))
# define cpu_is_omap3530() (cpu_is_omap3430())
-# define cpu_is_omap3505() is_omap3505()
# define cpu_is_omap3517() is_omap3517()
+# define cpu_is_omap3505() (cpu_is_omap3517() && \
+ !omap3_has_sgx())
# undef cpu_is_omap3630
# define cpu_is_omap3630() is_omap363x()
# define cpu_is_ti816x() is_ti816x()
@@ -379,35 +360,31 @@
/* Various silicon revisions for omap2 */
#define OMAP242X_CLASS 0x24200024
#define OMAP2420_REV_ES1_0 OMAP242X_CLASS
-#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (OMAP_REVBITS_01 << 8))
+#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (0x1 << 8))
#define OMAP243X_CLASS 0x24300024
#define OMAP2430_REV_ES1_0 OMAP243X_CLASS
#define OMAP343X_CLASS 0x34300034
#define OMAP3430_REV_ES1_0 OMAP343X_CLASS
-#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (OMAP_REVBITS_01 << 8))
-#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (OMAP_REVBITS_02 << 8))
-#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (OMAP_REVBITS_03 << 8))
-#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (OMAP_REVBITS_04 << 8))
-#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (OMAP_REVBITS_05 << 8))
+#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (0x1 << 8))
+#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (0x2 << 8))
+#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (0x3 << 8))
+#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (0x4 << 8))
+#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (0x5 << 8))
#define OMAP363X_CLASS 0x36300034
#define OMAP3630_REV_ES1_0 OMAP363X_CLASS
-#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (OMAP_REVBITS_01 << 8))
-#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (OMAP_REVBITS_02 << 8))
+#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8))
+#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8))
-#define OMAP35XX_CLASS 0x35000034
-#define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 8))
-#define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 8))
-#define OMAP3525_REV(v) (OMAP35XX_CLASS | (0x3525 << 16) | (v << 8))
-#define OMAP3530_REV(v) (OMAP35XX_CLASS | (0x3530 << 16) | (v << 8))
-#define OMAP3505_REV(v) (OMAP35XX_CLASS | (0x3505 << 16) | (v << 8))
-#define OMAP3517_REV(v) (OMAP35XX_CLASS | (0x3517 << 16) | (v << 8))
+#define OMAP3517_CLASS 0x35170034
+#define OMAP3517_REV_ES1_0 OMAP3517_CLASS
+#define OMAP3517_REV_ES1_1 (OMAP3517_CLASS | (0x1 << 8))
#define TI816X_CLASS 0x81600034
#define TI8168_REV_ES1_0 TI816X_CLASS
-#define TI8168_REV_ES1_1 (TI816X_CLASS | (OMAP_REVBITS_01 << 8))
+#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8))
#define OMAP443X_CLASS 0x44300044
#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8))
@@ -418,61 +395,6 @@
#define OMAP446X_CLASS 0x44600044
#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8))
-/*
- * omap_chip bits
- *
- * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is
- * valid on all chips of that type. CHIP_IS_OMAP3430ES{1,2} indicates
- * something that is only valid on that particular ES revision.
- *
- * These bits may be ORed together to indicate structures that are
- * available on multiple chip types.
- *
- * To test whether a particular structure matches the current OMAP chip type,
- * use omap_chip_is().
- *
- */
-#define CHIP_IS_OMAP2420 (1 << 0)
-#define CHIP_IS_OMAP2430 (1 << 1)
-#define CHIP_IS_OMAP3430 (1 << 2)
-#define CHIP_IS_OMAP3430ES1 (1 << 3)
-#define CHIP_IS_OMAP3430ES2 (1 << 4)
-#define CHIP_IS_OMAP3430ES3_0 (1 << 5)
-#define CHIP_IS_OMAP3430ES3_1 (1 << 6)
-#define CHIP_IS_OMAP3630ES1 (1 << 7)
-#define CHIP_IS_OMAP4430ES1 (1 << 8)
-#define CHIP_IS_OMAP3630ES1_1 (1 << 9)
-#define CHIP_IS_OMAP3630ES1_2 (1 << 10)
-#define CHIP_IS_OMAP4430ES2 (1 << 11)
-#define CHIP_IS_OMAP4430ES2_1 (1 << 12)
-#define CHIP_IS_OMAP4430ES2_2 (1 << 13)
-#define CHIP_IS_TI816X (1 << 14)
-#define CHIP_IS_OMAP4460ES1_0 (1 << 15)
-
-#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
-
-#define CHIP_IS_OMAP4430 (CHIP_IS_OMAP4430ES1 | \
- CHIP_IS_OMAP4430ES2 | \
- CHIP_IS_OMAP4430ES2_1 | \
- CHIP_IS_OMAP4430ES2_2 | \
- CHIP_IS_OMAP4460ES1_0)
-
-/*
- * "GE" here represents "greater than or equal to" in terms of ES
- * levels. So CHIP_GE_OMAP3430ES2 is intended to match all OMAP3430
- * chips at ES2 and beyond, but not, for example, any OMAP lines after
- * OMAP3.
- */
-#define CHIP_GE_OMAP3430ES2 (CHIP_IS_OMAP3430ES2 | \
- CHIP_IS_OMAP3430ES3_0 | \
- CHIP_GE_OMAP3430ES3_1)
-#define CHIP_GE_OMAP3430ES3_1 (CHIP_IS_OMAP3430ES3_1 | \
- CHIP_IS_OMAP3630ES1 | \
- CHIP_GE_OMAP3630ES1_1)
-#define CHIP_GE_OMAP3630ES1_1 (CHIP_IS_OMAP3630ES1_1 | \
- CHIP_IS_OMAP3630ES1_2)
-
-int omap_chip_is(struct omap_chip_id oci);
void omap2_check_revision(void);
/*
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index eb5d16c..d11025e 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -1,5 +1,5 @@
/*
- * arch/arm/plat-omap/include/mach/dmtimer.h
+ * arch/arm/plat-omap/include/plat/dmtimer.h
*
* OMAP Dual-Mode Timers
*
@@ -35,6 +35,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
#ifndef __ASM_ARCH_DMTIMER_H
#define __ASM_ARCH_DMTIMER_H
@@ -59,12 +60,56 @@
* in OMAP4 can be distinguished.
*/
#define OMAP_TIMER_IP_VERSION_1 0x1
+
+/* timer capabilities used in hwmod database */
+#define OMAP_TIMER_SECURE 0x80000000
+#define OMAP_TIMER_ALWON 0x40000000
+#define OMAP_TIMER_HAS_PWM 0x20000000
+
+struct omap_timer_capability_dev_attr {
+ u32 timer_capability;
+};
+
struct omap_dm_timer;
struct clk;
+struct timer_regs {
+ u32 tidr;
+ u32 tiocp_cfg;
+ u32 tistat;
+ u32 tisr;
+ u32 tier;
+ u32 twer;
+ u32 tclr;
+ u32 tcrr;
+ u32 tldr;
+ u32 ttrg;
+ u32 twps;
+ u32 tmar;
+ u32 tcar1;
+ u32 tsicr;
+ u32 tcar2;
+ u32 tpir;
+ u32 tnir;
+ u32 tcvr;
+ u32 tocr;
+ u32 towr;
+};
+
+struct dmtimer_platform_data {
+ int (*set_timer_src)(struct platform_device *pdev, int source);
+ int timer_ip_version;
+ u32 needs_manual_reset:1;
+ bool reserved;
+
+ bool loses_context;
+
+ u32 (*get_context_loss_count)(struct device *dev);
+};
+
struct omap_dm_timer *omap_dm_timer_request(void);
struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
-void omap_dm_timer_free(struct omap_dm_timer *timer);
+int omap_dm_timer_free(struct omap_dm_timer *timer);
void omap_dm_timer_enable(struct omap_dm_timer *timer);
void omap_dm_timer_disable(struct omap_dm_timer *timer);
@@ -73,23 +118,23 @@
u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer);
-void omap_dm_timer_trigger(struct omap_dm_timer *timer);
-void omap_dm_timer_start(struct omap_dm_timer *timer);
-void omap_dm_timer_stop(struct omap_dm_timer *timer);
+int omap_dm_timer_trigger(struct omap_dm_timer *timer);
+int omap_dm_timer_start(struct omap_dm_timer *timer);
+int omap_dm_timer_stop(struct omap_dm_timer *timer);
int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
-void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
-void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
-void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
-void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
-void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
+int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
+int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
+int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
+int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
+int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
-void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
+int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
-void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
+int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer);
-void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value);
+int omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value);
int omap_dm_timers_active(void);
@@ -98,12 +143,30 @@
* used by dmtimer.c and sys_timer related code.
*/
-/* register offsets */
-#define _OMAP_TIMER_ID_OFFSET 0x00
-#define _OMAP_TIMER_OCP_CFG_OFFSET 0x10
-#define _OMAP_TIMER_SYS_STAT_OFFSET 0x14
-#define _OMAP_TIMER_STAT_OFFSET 0x18
-#define _OMAP_TIMER_INT_EN_OFFSET 0x1c
+/*
+ * The interrupt registers are different between v1 and v2 ip.
+ * These registers are offsets from timer->iobase.
+ */
+#define OMAP_TIMER_ID_OFFSET 0x00
+#define OMAP_TIMER_OCP_CFG_OFFSET 0x10
+
+#define OMAP_TIMER_V1_SYS_STAT_OFFSET 0x14
+#define OMAP_TIMER_V1_STAT_OFFSET 0x18
+#define OMAP_TIMER_V1_INT_EN_OFFSET 0x1c
+
+#define OMAP_TIMER_V2_IRQSTATUS_RAW 0x24
+#define OMAP_TIMER_V2_IRQSTATUS 0x28
+#define OMAP_TIMER_V2_IRQENABLE_SET 0x2c
+#define OMAP_TIMER_V2_IRQENABLE_CLR 0x30
+
+/*
+ * The functional registers have a different base on v1 and v2 ip.
+ * These registers are offsets from timer->func_base. The func_base
+ * is samae as io_base for v1 and io_base + 0x14 for v2 ip.
+ *
+ */
+#define OMAP_TIMER_V2_FUNC_OFFSET 0x14
+
#define _OMAP_TIMER_WAKEUP_EN_OFFSET 0x20
#define _OMAP_TIMER_CTRL_OFFSET 0x24
#define OMAP_TIMER_CTRL_GPOCFG (1 << 14)
@@ -147,21 +210,6 @@
/* register offsets with the write pending bit encoded */
#define WPSHIFT 16
-#define OMAP_TIMER_ID_REG (_OMAP_TIMER_ID_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_OCP_CFG_REG (_OMAP_TIMER_OCP_CFG_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_SYS_STAT_REG (_OMAP_TIMER_SYS_STAT_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_STAT_REG (_OMAP_TIMER_STAT_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_INT_EN_REG (_OMAP_TIMER_INT_EN_OFFSET \
- | (WP_NONE << WPSHIFT))
-
#define OMAP_TIMER_WAKEUP_EN_REG (_OMAP_TIMER_WAKEUP_EN_OFFSET \
| (WP_NONE << WPSHIFT))
@@ -209,49 +257,88 @@
struct omap_dm_timer {
unsigned long phys_base;
+ int id;
int irq;
-#ifdef CONFIG_ARCH_OMAP2PLUS
struct clk *iclk, *fclk;
-#endif
- void __iomem *io_base;
+
+ void __iomem *io_base;
+ void __iomem *sys_stat; /* TISTAT timer status */
+ void __iomem *irq_stat; /* TISR/IRQSTATUS interrupt status */
+ void __iomem *irq_ena; /* irq enable */
+ void __iomem *irq_dis; /* irq disable, only on v2 ip */
+ void __iomem *pend; /* write pending */
+ void __iomem *func_base; /* function register base */
+
unsigned long rate;
unsigned reserved:1;
- unsigned enabled:1;
unsigned posted:1;
+ struct timer_regs context;
+ bool loses_context;
+ int ctx_loss_count;
+ int revision;
+ struct platform_device *pdev;
+ struct list_head node;
+
+ u32 (*get_context_loss_count)(struct device *dev);
};
-extern u32 sys_timer_reserved;
-void omap_dm_timer_prepare(struct omap_dm_timer *timer);
+int omap_dm_timer_prepare(struct omap_dm_timer *timer);
-static inline u32 __omap_dm_timer_read(void __iomem *base, u32 reg,
+static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
int posted)
{
if (posted)
- while (__raw_readl(base + (OMAP_TIMER_WRITE_PEND_REG & 0xff))
- & (reg >> WPSHIFT))
+ while (__raw_readl(timer->pend) & (reg >> WPSHIFT))
cpu_relax();
- return __raw_readl(base + (reg & 0xff));
+ return __raw_readl(timer->func_base + (reg & 0xff));
}
-static inline void __omap_dm_timer_write(void __iomem *base, u32 reg, u32 val,
- int posted)
+static inline void __omap_dm_timer_write(struct omap_dm_timer *timer,
+ u32 reg, u32 val, int posted)
{
if (posted)
- while (__raw_readl(base + (OMAP_TIMER_WRITE_PEND_REG & 0xff))
- & (reg >> WPSHIFT))
+ while (__raw_readl(timer->pend) & (reg >> WPSHIFT))
cpu_relax();
- __raw_writel(val, base + (reg & 0xff));
+ __raw_writel(val, timer->func_base + (reg & 0xff));
+}
+
+static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
+{
+ u32 tidr;
+
+ /* Assume v1 ip if bits [31:16] are zero */
+ tidr = __raw_readl(timer->io_base);
+ if (!(tidr >> 16)) {
+ timer->revision = 1;
+ timer->sys_stat = timer->io_base +
+ OMAP_TIMER_V1_SYS_STAT_OFFSET;
+ timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
+ timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
+ timer->irq_dis = 0;
+ timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
+ timer->func_base = timer->io_base;
+ } else {
+ timer->revision = 2;
+ timer->sys_stat = 0;
+ timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
+ timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
+ timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
+ timer->pend = timer->io_base +
+ _OMAP_TIMER_WRITE_PEND_OFFSET +
+ OMAP_TIMER_V2_FUNC_OFFSET;
+ timer->func_base = timer->io_base + OMAP_TIMER_V2_FUNC_OFFSET;
+ }
}
/* Assumes the source clock has been set by caller */
-static inline void __omap_dm_timer_reset(void __iomem *base, int autoidle,
- int wakeup)
+static inline void __omap_dm_timer_reset(struct omap_dm_timer *timer,
+ int autoidle, int wakeup)
{
u32 l;
- l = __omap_dm_timer_read(base, OMAP_TIMER_OCP_CFG_REG, 0);
+ l = __raw_readl(timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET);
l |= 0x02 << 3; /* Set to smart-idle mode */
l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */
@@ -261,10 +348,10 @@
if (wakeup)
l |= 1 << 2;
- __omap_dm_timer_write(base, OMAP_TIMER_OCP_CFG_REG, l, 0);
+ __raw_writel(l, timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET);
/* Match hardware reset default of posted mode */
- __omap_dm_timer_write(base, OMAP_TIMER_IF_CTRL_REG,
+ __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
OMAP_TIMER_CTRL_POSTED, 0);
}
@@ -286,18 +373,18 @@
return ret;
}
-static inline void __omap_dm_timer_stop(void __iomem *base, int posted,
- unsigned long rate)
+static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer,
+ int posted, unsigned long rate)
{
u32 l;
- l = __omap_dm_timer_read(base, OMAP_TIMER_CTRL_REG, posted);
+ l = __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
if (l & OMAP_TIMER_CTRL_ST) {
l &= ~0x1;
- __omap_dm_timer_write(base, OMAP_TIMER_CTRL_REG, l, posted);
+ __omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, l, posted);
#ifdef CONFIG_ARCH_OMAP2PLUS
/* Readback to make sure write has completed */
- __omap_dm_timer_read(base, OMAP_TIMER_CTRL_REG, posted);
+ __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
/*
* Wait for functional clock period x 3.5 to make sure that
* timer is stopped
@@ -307,34 +394,34 @@
}
/* Ack possibly pending interrupt */
- __omap_dm_timer_write(base, OMAP_TIMER_STAT_REG,
- OMAP_TIMER_INT_OVERFLOW, 0);
+ __raw_writel(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
}
-static inline void __omap_dm_timer_load_start(void __iomem *base, u32 ctrl,
- unsigned int load, int posted)
+static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer,
+ u32 ctrl, unsigned int load,
+ int posted)
{
- __omap_dm_timer_write(base, OMAP_TIMER_COUNTER_REG, load, posted);
- __omap_dm_timer_write(base, OMAP_TIMER_CTRL_REG, ctrl, posted);
+ __omap_dm_timer_write(timer, OMAP_TIMER_COUNTER_REG, load, posted);
+ __omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, ctrl, posted);
}
-static inline void __omap_dm_timer_int_enable(void __iomem *base,
+static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer,
unsigned int value)
{
- __omap_dm_timer_write(base, OMAP_TIMER_INT_EN_REG, value, 0);
- __omap_dm_timer_write(base, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
+ __raw_writel(value, timer->irq_ena);
+ __omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
}
-static inline unsigned int __omap_dm_timer_read_counter(void __iomem *base,
- int posted)
+static inline unsigned int
+__omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted)
{
- return __omap_dm_timer_read(base, OMAP_TIMER_COUNTER_REG, posted);
+ return __omap_dm_timer_read(timer, OMAP_TIMER_COUNTER_REG, posted);
}
-static inline void __omap_dm_timer_write_status(void __iomem *base,
+static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
unsigned int value)
{
- __omap_dm_timer_write(base, OMAP_TIMER_STAT_REG, value, 0);
+ __raw_writel(value, timer->irq_stat);
}
#endif /* __ASM_ARCH_DMTIMER_H */
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index 91e8de3..9e86ee0 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -222,26 +222,6 @@
#include <linux/errno.h>
#include <asm-generic/gpio.h>
-static inline int gpio_get_value(unsigned gpio)
-{
- return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- __gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
- return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return __gpio_to_irq(gpio);
-}
-
static inline int irq_to_gpio(unsigned irq)
{
int tmp;
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
index ebe67ea..7471521 100644
--- a/arch/arm/plat-omap/include/plat/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -228,13 +228,13 @@
#define OMAP44XX_EMIF2_PHYS OMAP44XX_EMIF2_BASE
/* 0x4d000000 --> 0xfd200000 */
-#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF2_PHYS + OMAP4_L3_PER_IO_OFFSET)
#define OMAP44XX_EMIF2_SIZE SZ_1M
+#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF1_VIRT + OMAP44XX_EMIF1_SIZE)
#define OMAP44XX_DMM_PHYS OMAP44XX_DMM_BASE
/* 0x4e000000 --> 0xfd300000 */
-#define OMAP44XX_DMM_VIRT (OMAP44XX_DMM_PHYS + OMAP4_L3_PER_IO_OFFSET)
#define OMAP44XX_DMM_SIZE SZ_1M
+#define OMAP44XX_DMM_VIRT (OMAP44XX_EMIF2_VIRT + OMAP44XX_EMIF2_SIZE)
/*
* ----------------------------------------------------------------------------
* Omap specific register access
@@ -300,7 +300,7 @@
#endif
extern void omap2_init_common_infrastructure(void);
-extern void omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
+extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1);
#define __arch_ioremap omap_ioremap
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index 9882c65..8fa74e2 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -25,9 +25,7 @@
#define __ASM_ARCH_OMAP_MCBSP_H
#include <linux/spinlock.h>
-
-#include <mach/hardware.h>
-#include <plat/clock.h>
+#include <linux/clk.h>
/* macro for building platform_device for McBSP ports */
#define OMAP_MCBSP_PLATFORM_DEVICE(port_nr) \
@@ -40,104 +38,60 @@
#define MCBSP_CONFIG_TYPE3 0x3
#define MCBSP_CONFIG_TYPE4 0x4
-#define OMAP7XX_MCBSP1_BASE 0xfffb1000
-#define OMAP7XX_MCBSP2_BASE 0xfffb1800
+/* McBSP register numbers. Register address offset = num * reg_step */
+enum {
+ /* Common registers */
+ OMAP_MCBSP_REG_SPCR2 = 4,
+ OMAP_MCBSP_REG_SPCR1,
+ OMAP_MCBSP_REG_RCR2,
+ OMAP_MCBSP_REG_RCR1,
+ OMAP_MCBSP_REG_XCR2,
+ OMAP_MCBSP_REG_XCR1,
+ OMAP_MCBSP_REG_SRGR2,
+ OMAP_MCBSP_REG_SRGR1,
+ OMAP_MCBSP_REG_MCR2,
+ OMAP_MCBSP_REG_MCR1,
+ OMAP_MCBSP_REG_RCERA,
+ OMAP_MCBSP_REG_RCERB,
+ OMAP_MCBSP_REG_XCERA,
+ OMAP_MCBSP_REG_XCERB,
+ OMAP_MCBSP_REG_PCR0,
+ OMAP_MCBSP_REG_RCERC,
+ OMAP_MCBSP_REG_RCERD,
+ OMAP_MCBSP_REG_XCERC,
+ OMAP_MCBSP_REG_XCERD,
+ OMAP_MCBSP_REG_RCERE,
+ OMAP_MCBSP_REG_RCERF,
+ OMAP_MCBSP_REG_XCERE,
+ OMAP_MCBSP_REG_XCERF,
+ OMAP_MCBSP_REG_RCERG,
+ OMAP_MCBSP_REG_RCERH,
+ OMAP_MCBSP_REG_XCERG,
+ OMAP_MCBSP_REG_XCERH,
-#define OMAP1510_MCBSP1_BASE 0xe1011800
-#define OMAP1510_MCBSP2_BASE 0xfffb1000
-#define OMAP1510_MCBSP3_BASE 0xe1017000
+ /* OMAP1-OMAP2420 registers */
+ OMAP_MCBSP_REG_DRR2 = 0,
+ OMAP_MCBSP_REG_DRR1,
+ OMAP_MCBSP_REG_DXR2,
+ OMAP_MCBSP_REG_DXR1,
-#define OMAP1610_MCBSP1_BASE 0xe1011800
-#define OMAP1610_MCBSP2_BASE 0xfffb1000
-#define OMAP1610_MCBSP3_BASE 0xe1017000
+ /* OMAP2430 and onwards */
+ OMAP_MCBSP_REG_DRR = 0,
+ OMAP_MCBSP_REG_DXR = 2,
+ OMAP_MCBSP_REG_SYSCON = 35,
+ OMAP_MCBSP_REG_THRSH2,
+ OMAP_MCBSP_REG_THRSH1,
+ OMAP_MCBSP_REG_IRQST = 40,
+ OMAP_MCBSP_REG_IRQEN,
+ OMAP_MCBSP_REG_WAKEUPEN,
+ OMAP_MCBSP_REG_XCCR,
+ OMAP_MCBSP_REG_RCCR,
+ OMAP_MCBSP_REG_XBUFFSTAT,
+ OMAP_MCBSP_REG_RBUFFSTAT,
+ OMAP_MCBSP_REG_SSELCR,
+};
-#ifdef CONFIG_ARCH_OMAP1
-
-#define OMAP_MCBSP_REG_DRR2 0x00
-#define OMAP_MCBSP_REG_DRR1 0x02
-#define OMAP_MCBSP_REG_DXR2 0x04
-#define OMAP_MCBSP_REG_DXR1 0x06
-#define OMAP_MCBSP_REG_DRR 0x02
-#define OMAP_MCBSP_REG_DXR 0x06
-#define OMAP_MCBSP_REG_SPCR2 0x08
-#define OMAP_MCBSP_REG_SPCR1 0x0a
-#define OMAP_MCBSP_REG_RCR2 0x0c
-#define OMAP_MCBSP_REG_RCR1 0x0e
-#define OMAP_MCBSP_REG_XCR2 0x10
-#define OMAP_MCBSP_REG_XCR1 0x12
-#define OMAP_MCBSP_REG_SRGR2 0x14
-#define OMAP_MCBSP_REG_SRGR1 0x16
-#define OMAP_MCBSP_REG_MCR2 0x18
-#define OMAP_MCBSP_REG_MCR1 0x1a
-#define OMAP_MCBSP_REG_RCERA 0x1c
-#define OMAP_MCBSP_REG_RCERB 0x1e
-#define OMAP_MCBSP_REG_XCERA 0x20
-#define OMAP_MCBSP_REG_XCERB 0x22
-#define OMAP_MCBSP_REG_PCR0 0x24
-#define OMAP_MCBSP_REG_RCERC 0x26
-#define OMAP_MCBSP_REG_RCERD 0x28
-#define OMAP_MCBSP_REG_XCERC 0x2A
-#define OMAP_MCBSP_REG_XCERD 0x2C
-#define OMAP_MCBSP_REG_RCERE 0x2E
-#define OMAP_MCBSP_REG_RCERF 0x30
-#define OMAP_MCBSP_REG_XCERE 0x32
-#define OMAP_MCBSP_REG_XCERF 0x34
-#define OMAP_MCBSP_REG_RCERG 0x36
-#define OMAP_MCBSP_REG_RCERH 0x38
-#define OMAP_MCBSP_REG_XCERG 0x3A
-#define OMAP_MCBSP_REG_XCERH 0x3C
-
-/* Dummy defines, these are not available on omap1 */
-#define OMAP_MCBSP_REG_XCCR 0x00
-#define OMAP_MCBSP_REG_RCCR 0x00
-
-#else
-
-#define OMAP_MCBSP_REG_DRR2 0x00
-#define OMAP_MCBSP_REG_DRR1 0x04
-#define OMAP_MCBSP_REG_DXR2 0x08
-#define OMAP_MCBSP_REG_DXR1 0x0C
-#define OMAP_MCBSP_REG_DRR 0x00
-#define OMAP_MCBSP_REG_DXR 0x08
-#define OMAP_MCBSP_REG_SPCR2 0x10
-#define OMAP_MCBSP_REG_SPCR1 0x14
-#define OMAP_MCBSP_REG_RCR2 0x18
-#define OMAP_MCBSP_REG_RCR1 0x1C
-#define OMAP_MCBSP_REG_XCR2 0x20
-#define OMAP_MCBSP_REG_XCR1 0x24
-#define OMAP_MCBSP_REG_SRGR2 0x28
-#define OMAP_MCBSP_REG_SRGR1 0x2C
-#define OMAP_MCBSP_REG_MCR2 0x30
-#define OMAP_MCBSP_REG_MCR1 0x34
-#define OMAP_MCBSP_REG_RCERA 0x38
-#define OMAP_MCBSP_REG_RCERB 0x3C
-#define OMAP_MCBSP_REG_XCERA 0x40
-#define OMAP_MCBSP_REG_XCERB 0x44
-#define OMAP_MCBSP_REG_PCR0 0x48
-#define OMAP_MCBSP_REG_RCERC 0x4C
-#define OMAP_MCBSP_REG_RCERD 0x50
-#define OMAP_MCBSP_REG_XCERC 0x54
-#define OMAP_MCBSP_REG_XCERD 0x58
-#define OMAP_MCBSP_REG_RCERE 0x5C
-#define OMAP_MCBSP_REG_RCERF 0x60
-#define OMAP_MCBSP_REG_XCERE 0x64
-#define OMAP_MCBSP_REG_XCERF 0x68
-#define OMAP_MCBSP_REG_RCERG 0x6C
-#define OMAP_MCBSP_REG_RCERH 0x70
-#define OMAP_MCBSP_REG_XCERG 0x74
-#define OMAP_MCBSP_REG_XCERH 0x78
-#define OMAP_MCBSP_REG_SYSCON 0x8C
-#define OMAP_MCBSP_REG_THRSH2 0x90
-#define OMAP_MCBSP_REG_THRSH1 0x94
-#define OMAP_MCBSP_REG_IRQST 0xA0
-#define OMAP_MCBSP_REG_IRQEN 0xA4
-#define OMAP_MCBSP_REG_WAKEUPEN 0xA8
-#define OMAP_MCBSP_REG_XCCR 0xAC
-#define OMAP_MCBSP_REG_RCCR 0xB0
-#define OMAP_MCBSP_REG_XBUFFSTAT 0xB4
-#define OMAP_MCBSP_REG_RBUFFSTAT 0xB8
-#define OMAP_MCBSP_REG_SSELCR 0xBC
-
+/* OMAP3 sidetone control registers */
#define OMAP_ST_REG_REV 0x00
#define OMAP_ST_REG_SYSCONFIG 0x10
#define OMAP_ST_REG_IRQSTATUS 0x18
@@ -146,8 +100,6 @@
#define OMAP_ST_REG_SFIRCR 0x28
#define OMAP_ST_REG_SSELCR 0x2C
-#endif
-
/************************** McBSP SPCR1 bit definitions ***********************/
#define RRST 0x0001
#define RRDY 0x0002
@@ -344,20 +296,20 @@
struct omap_mcbsp_ops {
void (*request)(unsigned int);
void (*free)(unsigned int);
- int (*set_clks_src)(u8, u8);
};
struct omap_mcbsp_platform_data {
- unsigned long phys_base;
- u8 dma_rx_sync, dma_tx_sync;
- u16 rx_irq, tx_irq;
struct omap_mcbsp_ops *ops;
-#ifdef CONFIG_ARCH_OMAP3
- /* Sidetone block for McBSP 2 and 3 */
- unsigned long phys_base_st;
-#endif
u16 buffer_size;
- unsigned int mcbsp_config_type;
+ u8 reg_size;
+ u8 reg_step;
+
+ /* McBSP platform and instance specific features */
+ bool has_wakeup; /* Wakeup capability */
+ bool has_ccr; /* Transceiver has configuration control registers */
+ int (*enable_st_clock)(unsigned int, bool);
+ int (*set_clk_src)(struct device *dev, struct clk *clk, const char *src);
+ int (*mux_signal)(struct device *dev, const char *signal, const char *src);
};
struct omap_mcbsp_st_data {
@@ -389,14 +341,12 @@
spinlock_t lock;
struct omap_mcbsp_platform_data *pdata;
struct clk *fclk;
-#ifdef CONFIG_ARCH_OMAP3
struct omap_mcbsp_st_data *st_data;
int dma_op_mode;
u16 max_tx_thres;
u16 max_rx_thres;
-#endif
void *reg_cache;
- unsigned int mcbsp_config_type;
+ int reg_cache_size;
};
/**
@@ -408,16 +358,10 @@
};
extern struct omap_mcbsp **mcbsp_ptr;
-extern int omap_mcbsp_count, omap_mcbsp_cache_size;
-
-#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count)
-#define id_to_mcbsp_ptr(id) mcbsp_ptr[id];
+extern int omap_mcbsp_count;
int omap_mcbsp_init(void);
-void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
- struct omap_mcbsp_platform_data *config, int size);
void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
-#ifdef CONFIG_ARCH_OMAP3
void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
u16 omap_mcbsp_get_max_tx_threshold(unsigned int id);
@@ -426,18 +370,6 @@
u16 omap_mcbsp_get_tx_delay(unsigned int id);
u16 omap_mcbsp_get_rx_delay(unsigned int id);
int omap_mcbsp_get_dma_op_mode(unsigned int id);
-#else
-static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
-{ }
-static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
-{ }
-static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; }
-static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; }
-static inline u16 omap_mcbsp_get_fifo_size(unsigned int id) { return 0; }
-static inline u16 omap_mcbsp_get_tx_delay(unsigned int id) { return 0; }
-static inline u16 omap_mcbsp_get_rx_delay(unsigned int id) { return 0; }
-static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; }
-#endif
int omap_mcbsp_request(unsigned int id);
void omap_mcbsp_free(unsigned int id);
void omap_mcbsp_start(unsigned int id, int tx, int rx);
@@ -453,21 +385,11 @@
int omap_mcbsp_dma_ch_params(unsigned int id, unsigned int stream);
int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream);
-#ifdef CONFIG_ARCH_OMAP3
/* Sidetone specific API */
int omap_st_set_chgain(unsigned int id, int channel, s16 chgain);
int omap_st_get_chgain(unsigned int id, int channel, s16 *chgain);
int omap_st_enable(unsigned int id);
int omap_st_disable(unsigned int id);
int omap_st_is_enabled(unsigned int id);
-#else
-static inline int omap_st_set_chgain(unsigned int id, int channel,
- s16 chgain) { return 0; }
-static inline int omap_st_get_chgain(unsigned int id, int channel,
- s16 *chgain) { return 0; }
-static inline int omap_st_enable(unsigned int id) { return 0; }
-static inline int omap_st_disable(unsigned int id) { return 0; }
-static inline int omap_st_is_enabled(unsigned int id) { return 0; }
-#endif
#endif
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index ee405b36..12c5b0c 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -68,7 +68,7 @@
*
*/
struct omap_device {
- struct platform_device pdev;
+ struct platform_device *pdev;
struct omap_hwmod **hwmods;
struct omap_device_pm_latency *pm_lats;
u32 dev_wakeup_lat;
@@ -88,25 +88,20 @@
/* Core code interface */
-int omap_device_count_resources(struct omap_device *od);
-int omap_device_fill_resources(struct omap_device *od, struct resource *res);
-
-struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
+struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
struct omap_hwmod *oh, void *pdata,
int pdata_len,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt, int is_early_device);
-struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
struct omap_hwmod **oh, int oh_cnt,
void *pdata, int pdata_len,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt, int is_early_device);
-int omap_device_register(struct omap_device *od);
-int omap_early_device_register(struct omap_device *od);
-
void __iomem *omap_device_get_rt_va(struct omap_device *od);
+struct device *omap_device_get_by_hwmod_name(const char *oh_name);
/* OMAP PM interface */
int omap_device_align_pm_lat(struct platform_device *pdev,
@@ -122,11 +117,6 @@
int omap_device_disable_clocks(struct omap_device *od);
int omap_device_enable_clocks(struct omap_device *od);
-static inline void omap_device_disable_idle_on_suspend(struct omap_device *od)
-{
- od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND;
-}
-
/*
* Entries should be kept in latency order ascending
*
@@ -157,6 +147,17 @@
#define OMAP_DEVICE_LATENCY_AUTO_ADJUST BIT(1)
/* Get omap_device pointer from platform_device pointer */
-#define to_omap_device(x) container_of((x), struct omap_device, pdev)
+static inline struct omap_device *to_omap_device(struct platform_device *pdev)
+{
+ return pdev ? pdev->archdata.od : NULL;
+}
+
+static inline
+void omap_device_disable_idle_on_suspend(struct platform_device *pdev)
+{
+ struct omap_device *od = to_omap_device(pdev);
+
+ od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND;
+}
#endif
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 0e329ca..5419f1a 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -496,7 +496,6 @@
* @_state: internal-use hwmod state
* @_postsetup_state: internal-use state to leave the hwmod in after _setup()
* @flags: hwmod flags (documented below)
- * @omap_chip: OMAP chips this hwmod is present on
* @_lock: spinlock serializing operations on this hwmod
* @node: list node for hwmod list (internal use)
*
@@ -526,7 +525,6 @@
char *clkdm_name;
struct clockdomain *clkdm;
char *vdd_name;
- struct voltagedomain *voltdm;
struct omap_hwmod_ocp_if **masters; /* connect to *_IA */
struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */
void *dev_attr;
@@ -545,7 +543,6 @@
u8 _int_flags;
u8 _state;
u8 _postsetup_state;
- const struct omap_chip_id omap_chip;
};
int omap_hwmod_register(struct omap_hwmod **ohs);
diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h
new file mode 100644
index 0000000..0a6a482
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/voltage.h
@@ -0,0 +1,20 @@
+/*
+ * OMAP Voltage Management Routines
+ *
+ * Copyright (C) 2011, Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_VOLTAGE_H
+#define __ARCH_ARM_OMAP_VOLTAGE_H
+
+struct voltagedomain;
+
+struct voltagedomain *voltdm_lookup(const char *name);
+int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
+unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
+
+#endif
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 6c62af1..4b15cd7 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -24,45 +24,40 @@
#include <linux/slab.h>
#include <plat/mcbsp.h>
-#include <plat/omap_device.h>
#include <linux/pm_runtime.h>
-/* XXX These "sideways" includes are a sign that something is wrong */
-#include "../mach-omap2/cm2xxx_3xxx.h"
-#include "../mach-omap2/cm-regbits-34xx.h"
-
struct omap_mcbsp **mcbsp_ptr;
-int omap_mcbsp_count, omap_mcbsp_cache_size;
+int omap_mcbsp_count;
+
+#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count)
+#define id_to_mcbsp_ptr(id) mcbsp_ptr[id];
static void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
{
- if (cpu_class_is_omap1()) {
- ((u16 *)mcbsp->reg_cache)[reg / sizeof(u16)] = (u16)val;
- __raw_writew((u16)val, mcbsp->io_base + reg);
- } else if (cpu_is_omap2420()) {
- ((u16 *)mcbsp->reg_cache)[reg / sizeof(u32)] = (u16)val;
- __raw_writew((u16)val, mcbsp->io_base + reg);
+ void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step;
+
+ if (mcbsp->pdata->reg_size == 2) {
+ ((u16 *)mcbsp->reg_cache)[reg] = (u16)val;
+ __raw_writew((u16)val, addr);
} else {
- ((u32 *)mcbsp->reg_cache)[reg / sizeof(u32)] = val;
- __raw_writel(val, mcbsp->io_base + reg);
+ ((u32 *)mcbsp->reg_cache)[reg] = val;
+ __raw_writel(val, addr);
}
}
static int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg, bool from_cache)
{
- if (cpu_class_is_omap1()) {
- return !from_cache ? __raw_readw(mcbsp->io_base + reg) :
- ((u16 *)mcbsp->reg_cache)[reg / sizeof(u16)];
- } else if (cpu_is_omap2420()) {
- return !from_cache ? __raw_readw(mcbsp->io_base + reg) :
- ((u16 *)mcbsp->reg_cache)[reg / sizeof(u32)];
+ void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step;
+
+ if (mcbsp->pdata->reg_size == 2) {
+ return !from_cache ? __raw_readw(addr) :
+ ((u16 *)mcbsp->reg_cache)[reg];
} else {
- return !from_cache ? __raw_readl(mcbsp->io_base + reg) :
- ((u32 *)mcbsp->reg_cache)[reg / sizeof(u32)];
+ return !from_cache ? __raw_readl(addr) :
+ ((u32 *)mcbsp->reg_cache)[reg];
}
}
-#ifdef CONFIG_ARCH_OMAP3
static void omap_mcbsp_st_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
{
__raw_writel(val, mcbsp->st_data->io_base_st + reg);
@@ -72,7 +67,6 @@
{
return __raw_readl(mcbsp->st_data->io_base_st + reg);
}
-#endif
#define MCBSP_READ(mcbsp, reg) \
omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 0)
@@ -187,7 +181,7 @@
MCBSP_WRITE(mcbsp, MCR2, config->mcr2);
MCBSP_WRITE(mcbsp, MCR1, config->mcr1);
MCBSP_WRITE(mcbsp, PCR0, config->pcr0);
- if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ if (mcbsp->pdata->has_ccr) {
MCBSP_WRITE(mcbsp, XCCR, config->xccr);
MCBSP_WRITE(mcbsp, RCCR, config->rccr);
}
@@ -239,46 +233,28 @@
}
mcbsp = id_to_mcbsp_ptr(id);
- data_reg = mcbsp->phys_dma_base;
-
- if (mcbsp->mcbsp_config_type < MCBSP_CONFIG_TYPE2) {
+ if (mcbsp->pdata->reg_size == 2) {
if (stream)
- data_reg += OMAP_MCBSP_REG_DRR1;
+ data_reg = OMAP_MCBSP_REG_DRR1;
else
- data_reg += OMAP_MCBSP_REG_DXR1;
+ data_reg = OMAP_MCBSP_REG_DXR1;
} else {
if (stream)
- data_reg += OMAP_MCBSP_REG_DRR;
+ data_reg = OMAP_MCBSP_REG_DRR;
else
- data_reg += OMAP_MCBSP_REG_DXR;
+ data_reg = OMAP_MCBSP_REG_DXR;
}
- return data_reg;
+ return mcbsp->phys_dma_base + data_reg * mcbsp->pdata->reg_step;
}
EXPORT_SYMBOL(omap_mcbsp_dma_reg_params);
-#ifdef CONFIG_ARCH_OMAP3
-static struct omap_device *find_omap_device_by_dev(struct device *dev)
-{
- struct platform_device *pdev = container_of(dev,
- struct platform_device, dev);
- return container_of(pdev, struct omap_device, pdev);
-}
-
static void omap_st_on(struct omap_mcbsp *mcbsp)
{
unsigned int w;
- struct omap_device *od;
- od = find_omap_device_by_dev(mcbsp->dev);
-
- /*
- * Sidetone uses McBSP ICLK - which must not idle when sidetones
- * are enabled or sidetones start sounding ugly.
- */
- w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
- w &= ~(1 << (mcbsp->id - 2));
- omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
+ if (mcbsp->pdata->enable_st_clock)
+ mcbsp->pdata->enable_st_clock(mcbsp->id, 1);
/* Enable McBSP Sidetone */
w = MCBSP_READ(mcbsp, SSELCR);
@@ -292,9 +268,6 @@
static void omap_st_off(struct omap_mcbsp *mcbsp)
{
unsigned int w;
- struct omap_device *od;
-
- od = find_omap_device_by_dev(mcbsp->dev);
w = MCBSP_ST_READ(mcbsp, SSELCR);
MCBSP_ST_WRITE(mcbsp, SSELCR, w & ~(ST_SIDETONEEN));
@@ -302,17 +275,13 @@
w = MCBSP_READ(mcbsp, SSELCR);
MCBSP_WRITE(mcbsp, SSELCR, w & ~(SIDETONEEN));
- w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
- w |= 1 << (mcbsp->id - 2);
- omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
+ if (mcbsp->pdata->enable_st_clock)
+ mcbsp->pdata->enable_st_clock(mcbsp->id, 0);
}
static void omap_st_fir_write(struct omap_mcbsp *mcbsp, s16 *fir)
{
u16 val, i;
- struct omap_device *od;
-
- od = find_omap_device_by_dev(mcbsp->dev);
val = MCBSP_ST_READ(mcbsp, SSELCR);
@@ -340,9 +309,6 @@
{
u16 w;
struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
- struct omap_device *od;
-
- od = find_omap_device_by_dev(mcbsp->dev);
w = MCBSP_ST_READ(mcbsp, SSELCR);
@@ -525,14 +491,13 @@
{
struct omap_mcbsp *mcbsp;
- if (!cpu_is_omap34xx() && !cpu_is_omap44xx())
- return;
-
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return;
}
mcbsp = id_to_mcbsp_ptr(id);
+ if (mcbsp->pdata->buffer_size == 0)
+ return;
if (threshold && threshold <= mcbsp->max_tx_thres)
MCBSP_WRITE(mcbsp, THRSH2, threshold - 1);
@@ -548,14 +513,13 @@
{
struct omap_mcbsp *mcbsp;
- if (!cpu_is_omap34xx() && !cpu_is_omap44xx())
- return;
-
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return;
}
mcbsp = id_to_mcbsp_ptr(id);
+ if (mcbsp->pdata->buffer_size == 0)
+ return;
if (threshold && threshold <= mcbsp->max_rx_thres)
MCBSP_WRITE(mcbsp, THRSH1, threshold - 1);
@@ -625,6 +589,8 @@
return -ENODEV;
}
mcbsp = id_to_mcbsp_ptr(id);
+ if (mcbsp->pdata->buffer_size == 0)
+ return 0;
/* Returns the number of free locations in the buffer */
buffstat = MCBSP_READ(mcbsp, XBUFFSTAT);
@@ -648,6 +614,8 @@
return -ENODEV;
}
mcbsp = id_to_mcbsp_ptr(id);
+ if (mcbsp->pdata->buffer_size == 0)
+ return 0;
/* Returns the number of used locations in the buffer */
buffstat = MCBSP_READ(mcbsp, RBUFFSTAT);
@@ -683,46 +651,6 @@
}
EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode);
-static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
-{
- struct omap_device *od;
-
- od = find_omap_device_by_dev(mcbsp->dev);
- /*
- * Enable wakup behavior, smart idle and all wakeups
- * REVISIT: some wakeups may be unnecessary
- */
- if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
- MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN);
- }
-}
-
-static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp)
-{
- struct omap_device *od;
-
- od = find_omap_device_by_dev(mcbsp->dev);
-
- /*
- * Disable wakup behavior, smart idle and all wakeups
- */
- if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
- /*
- * HW bug workaround - If no_idle mode is taken, we need to
- * go to smart_idle before going to always_idle, or the
- * device will not hit retention anymore.
- */
-
- MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
- }
-}
-#else
-static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) {}
-static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) {}
-static inline void omap_st_start(struct omap_mcbsp *mcbsp) {}
-static inline void omap_st_stop(struct omap_mcbsp *mcbsp) {}
-#endif
-
int omap_mcbsp_request(unsigned int id)
{
struct omap_mcbsp *mcbsp;
@@ -735,7 +663,7 @@
}
mcbsp = id_to_mcbsp_ptr(id);
- reg_cache = kzalloc(omap_mcbsp_cache_size, GFP_KERNEL);
+ reg_cache = kzalloc(mcbsp->reg_cache_size, GFP_KERNEL);
if (!reg_cache) {
return -ENOMEM;
}
@@ -757,8 +685,9 @@
pm_runtime_get_sync(mcbsp->dev);
- /* Do procedure specific to omap34xx arch, if applicable */
- omap34xx_mcbsp_request(mcbsp);
+ /* Enable wakeup behavior */
+ if (mcbsp->pdata->has_wakeup)
+ MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN);
/*
* Make sure that transmitter, receiver and sample-rate generator are
@@ -795,8 +724,9 @@
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(id);
- /* Do procedure specific to omap34xx arch, if applicable */
- omap34xx_mcbsp_free(mcbsp);
+ /* Disable wakeup behavior */
+ if (mcbsp->pdata->has_wakeup)
+ MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
pm_runtime_put_sync(mcbsp->dev);
@@ -825,8 +755,9 @@
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(id);
- /* Do procedure specific to omap34xx arch, if applicable */
- omap34xx_mcbsp_free(mcbsp);
+ /* Disable wakeup behavior */
+ if (mcbsp->pdata->has_wakeup)
+ MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
pm_runtime_put_sync(mcbsp->dev);
@@ -866,7 +797,7 @@
}
mcbsp = id_to_mcbsp_ptr(id);
- if (cpu_is_omap34xx())
+ if (mcbsp->st_data)
omap_st_start(mcbsp);
/* Only enable SRG, if McBSP is master */
@@ -904,7 +835,7 @@
MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7));
}
- if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ if (mcbsp->pdata->has_ccr) {
/* Release the transmitter and receiver */
w = MCBSP_READ_CACHE(mcbsp, XCCR);
w &= ~(tx ? XDISABLE : 0);
@@ -934,7 +865,7 @@
/* Reset transmitter */
tx &= 1;
- if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ if (mcbsp->pdata->has_ccr) {
w = MCBSP_READ_CACHE(mcbsp, XCCR);
w |= (tx ? XDISABLE : 0);
MCBSP_WRITE(mcbsp, XCCR, w);
@@ -944,7 +875,7 @@
/* Reset receiver */
rx &= 1;
- if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ if (mcbsp->pdata->has_ccr) {
w = MCBSP_READ_CACHE(mcbsp, RCCR);
w |= (rx ? RDISABLE : 0);
MCBSP_WRITE(mcbsp, RCCR, w);
@@ -961,39 +892,72 @@
MCBSP_WRITE(mcbsp, SPCR2, w & ~(1 << 6));
}
- if (cpu_is_omap34xx())
+ if (mcbsp->st_data)
omap_st_stop(mcbsp);
}
EXPORT_SYMBOL(omap_mcbsp_stop);
-/*
- * The following functions are only required on an OMAP1-only build.
- * mach-omap2/mcbsp.c contains the real functions
- */
-#ifndef CONFIG_ARCH_OMAP2PLUS
int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id)
{
- WARN(1, "%s: should never be called on an OMAP1-only kernel\n",
- __func__);
- return -EINVAL;
+ struct omap_mcbsp *mcbsp;
+ const char *src;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ pr_err("%s: Invalid id (%d)\n", __func__, id + 1);
+ return -EINVAL;
+ }
+ mcbsp = id_to_mcbsp_ptr(id);
+
+ if (fck_src_id == MCBSP_CLKS_PAD_SRC)
+ src = "clks_ext";
+ else if (fck_src_id == MCBSP_CLKS_PRCM_SRC)
+ src = "clks_fclk";
+ else
+ return -EINVAL;
+
+ if (mcbsp->pdata->set_clk_src)
+ return mcbsp->pdata->set_clk_src(mcbsp->dev, mcbsp->fclk, src);
+ else
+ return -EINVAL;
}
+EXPORT_SYMBOL(omap2_mcbsp_set_clks_src);
void omap2_mcbsp1_mux_clkr_src(u8 mux)
{
- WARN(1, "%s: should never be called on an OMAP1-only kernel\n",
- __func__);
- return;
+ struct omap_mcbsp *mcbsp;
+ const char *src;
+
+ if (mux == CLKR_SRC_CLKR)
+ src = "clkr";
+ else if (mux == CLKR_SRC_CLKX)
+ src = "clkx";
+ else
+ return;
+
+ mcbsp = id_to_mcbsp_ptr(0);
+ if (mcbsp->pdata->mux_signal)
+ mcbsp->pdata->mux_signal(mcbsp->dev, "clkr", src);
}
+EXPORT_SYMBOL(omap2_mcbsp1_mux_clkr_src);
void omap2_mcbsp1_mux_fsr_src(u8 mux)
{
- WARN(1, "%s: should never be called on an OMAP1-only kernel\n",
- __func__);
- return;
-}
-#endif
+ struct omap_mcbsp *mcbsp;
+ const char *src;
-#ifdef CONFIG_ARCH_OMAP3
+ if (mux == FSR_SRC_FSR)
+ src = "fsr";
+ else if (mux == FSR_SRC_FSX)
+ src = "fsx";
+ else
+ return;
+
+ mcbsp = id_to_mcbsp_ptr(0);
+ if (mcbsp->pdata->mux_signal)
+ mcbsp->pdata->mux_signal(mcbsp->dev, "fsr", src);
+}
+EXPORT_SYMBOL(omap2_mcbsp1_mux_fsr_src);
+
#define max_thres(m) (mcbsp->pdata->buffer_size)
#define valid_threshold(m, val) ((val) <= max_thres(m))
#define THRESHOLD_PROP_BUILDER(prop) \
@@ -1084,6 +1048,17 @@
static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store);
+static const struct attribute *additional_attrs[] = {
+ &dev_attr_max_tx_thres.attr,
+ &dev_attr_max_rx_thres.attr,
+ &dev_attr_dma_op_mode.attr,
+ NULL,
+};
+
+static const struct attribute_group additional_attr_group = {
+ .attrs = (struct attribute **)additional_attrs,
+};
+
static ssize_t st_taps_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -1142,27 +1117,6 @@
static DEVICE_ATTR(st_taps, 0644, st_taps_show, st_taps_store);
-static const struct attribute *additional_attrs[] = {
- &dev_attr_max_tx_thres.attr,
- &dev_attr_max_rx_thres.attr,
- &dev_attr_dma_op_mode.attr,
- NULL,
-};
-
-static const struct attribute_group additional_attr_group = {
- .attrs = (struct attribute **)additional_attrs,
-};
-
-static inline int __devinit omap_additional_add(struct device *dev)
-{
- return sysfs_create_group(&dev->kobj, &additional_attr_group);
-}
-
-static inline void __devexit omap_additional_remove(struct device *dev)
-{
- sysfs_remove_group(&dev->kobj, &additional_attr_group);
-}
-
static const struct attribute *sidetone_attrs[] = {
&dev_attr_st_taps.attr,
NULL,
@@ -1172,10 +1126,9 @@
.attrs = (struct attribute **)sidetone_attrs,
};
-static int __devinit omap_st_add(struct omap_mcbsp *mcbsp)
+static int __devinit omap_st_add(struct omap_mcbsp *mcbsp,
+ struct resource *res)
{
- struct platform_device *pdev;
- struct resource *res;
struct omap_mcbsp_st_data *st_data;
int err;
@@ -1185,9 +1138,6 @@
goto err1;
}
- pdev = container_of(mcbsp->dev, struct platform_device, dev);
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sidetone");
st_data->io_base_st = ioremap(res->start, resource_size(res));
if (!st_data->io_base_st) {
err = -ENOMEM;
@@ -1214,60 +1164,11 @@
{
struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
- if (st_data) {
- sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group);
- iounmap(st_data->io_base_st);
- kfree(st_data);
- }
+ sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group);
+ iounmap(st_data->io_base_st);
+ kfree(st_data);
}
-static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
-{
- mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
- if (cpu_is_omap34xx()) {
- /*
- * Initially configure the maximum thresholds to a safe value.
- * The McBSP FIFO usage with these values should not go under
- * 16 locations.
- * If the whole FIFO without safety buffer is used, than there
- * is a possibility that the DMA will be not able to push the
- * new data on time, causing channel shifts in runtime.
- */
- mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10;
- mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10;
- /*
- * REVISIT: Set dmap_op_mode to THRESHOLD as default
- * for mcbsp2 instances.
- */
- if (omap_additional_add(mcbsp->dev))
- dev_warn(mcbsp->dev,
- "Unable to create additional controls\n");
-
- if (mcbsp->id == 2 || mcbsp->id == 3)
- if (omap_st_add(mcbsp))
- dev_warn(mcbsp->dev,
- "Unable to create sidetone controls\n");
-
- } else {
- mcbsp->max_tx_thres = -EINVAL;
- mcbsp->max_rx_thres = -EINVAL;
- }
-}
-
-static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp)
-{
- if (cpu_is_omap34xx()) {
- omap_additional_remove(mcbsp->dev);
-
- if (mcbsp->id == 2 || mcbsp->id == 3)
- omap_st_remove(mcbsp);
- }
-}
-#else
-static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {}
-static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) {}
-#endif /* CONFIG_ARCH_OMAP3 */
-
/*
* McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
* 730 has only 2 McBSP, and both of them are MPU peripherals.
@@ -1316,7 +1217,7 @@
}
}
mcbsp->phys_base = res->start;
- omap_mcbsp_cache_size = resource_size(res);
+ mcbsp->reg_cache_size = resource_size(res);
mcbsp->io_base = ioremap(res->start, resource_size(res));
if (!mcbsp->io_base) {
ret = -ENOMEM;
@@ -1364,15 +1265,52 @@
mcbsp->pdata = pdata;
mcbsp->dev = &pdev->dev;
mcbsp_ptr[id] = mcbsp;
- mcbsp->mcbsp_config_type = pdata->mcbsp_config_type;
platform_set_drvdata(pdev, mcbsp);
pm_runtime_enable(mcbsp->dev);
- /* Initialize mcbsp properties for OMAP34XX if needed / applicable */
- omap34xx_device_init(mcbsp);
+ mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
+ if (mcbsp->pdata->buffer_size) {
+ /*
+ * Initially configure the maximum thresholds to a safe value.
+ * The McBSP FIFO usage with these values should not go under
+ * 16 locations.
+ * If the whole FIFO without safety buffer is used, than there
+ * is a possibility that the DMA will be not able to push the
+ * new data on time, causing channel shifts in runtime.
+ */
+ mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10;
+ mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10;
+
+ ret = sysfs_create_group(&mcbsp->dev->kobj,
+ &additional_attr_group);
+ if (ret) {
+ dev_err(mcbsp->dev,
+ "Unable to create additional controls\n");
+ goto err_thres;
+ }
+ } else {
+ mcbsp->max_tx_thres = -EINVAL;
+ mcbsp->max_rx_thres = -EINVAL;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sidetone");
+ if (res) {
+ ret = omap_st_add(mcbsp, res);
+ if (ret) {
+ dev_err(mcbsp->dev,
+ "Unable to create sidetone controls\n");
+ goto err_st;
+ }
+ }
return 0;
+err_st:
+ if (mcbsp->pdata->buffer_size)
+ sysfs_remove_group(&mcbsp->dev->kobj,
+ &additional_attr_group);
+err_thres:
+ clk_put(mcbsp->fclk);
err_res:
iounmap(mcbsp->io_base);
err_ioremap:
@@ -1392,7 +1330,12 @@
mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(mcbsp->id);
- omap34xx_device_exit(mcbsp);
+ if (mcbsp->pdata->buffer_size)
+ sysfs_remove_group(&mcbsp->dev->kobj,
+ &additional_attr_group);
+
+ if (mcbsp->st_data)
+ omap_st_remove(mcbsp);
clk_put(mcbsp->fclk);
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 02609ee..cd90bed 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -85,6 +85,8 @@
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/notifier.h>
#include <plat/omap_device.h>
#include <plat/omap_hwmod.h>
@@ -94,6 +96,23 @@
#define USE_WAKEUP_LAT 0
#define IGNORE_WAKEUP_LAT 1
+static int omap_device_register(struct platform_device *pdev);
+static int omap_early_device_register(struct platform_device *pdev);
+static struct omap_device *omap_device_alloc(struct platform_device *pdev,
+ struct omap_hwmod **ohs, int oh_cnt,
+ struct omap_device_pm_latency *pm_lats,
+ int pm_lats_cnt);
+static void omap_device_delete(struct omap_device *od);
+
+
+static struct omap_device_pm_latency omap_default_latency[] = {
+ {
+ .deactivate_func = omap_device_idle_hwmods,
+ .activate_func = omap_device_enable_hwmods,
+ .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+ }
+};
+
/* Private functions */
/**
@@ -114,7 +133,7 @@
{
struct timespec a, b, c;
- pr_debug("omap_device: %s: activating\n", od->pdev.name);
+ dev_dbg(&od->pdev->dev, "omap_device: activating\n");
while (od->pm_lat_level > 0) {
struct omap_device_pm_latency *odpl;
@@ -138,25 +157,24 @@
c = timespec_sub(b, a);
act_lat = timespec_to_ns(&c);
- pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time "
- "%llu nsec\n", od->pdev.name, od->pm_lat_level,
- act_lat);
+ dev_dbg(&od->pdev->dev,
+ "omap_device: pm_lat %d: activate: elapsed time "
+ "%llu nsec\n", od->pm_lat_level, act_lat);
if (act_lat > odpl->activate_lat) {
odpl->activate_lat_worst = act_lat;
if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
odpl->activate_lat = act_lat;
- pr_warning("omap_device: %s.%d: new worst case "
- "activate latency %d: %llu\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, act_lat);
+ dev_dbg(&od->pdev->dev,
+ "new worst case activate latency "
+ "%d: %llu\n",
+ od->pm_lat_level, act_lat);
} else
- pr_warning("omap_device: %s.%d: activate "
- "latency %d higher than exptected. "
- "(%llu > %d)\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, act_lat,
- odpl->activate_lat);
+ dev_warn(&od->pdev->dev,
+ "activate latency %d "
+ "higher than exptected. (%llu > %d)\n",
+ od->pm_lat_level, act_lat,
+ odpl->activate_lat);
}
od->dev_wakeup_lat -= odpl->activate_lat;
@@ -183,7 +201,7 @@
{
struct timespec a, b, c;
- pr_debug("omap_device: %s: deactivating\n", od->pdev.name);
+ dev_dbg(&od->pdev->dev, "omap_device: deactivating\n");
while (od->pm_lat_level < od->pm_lats_cnt) {
struct omap_device_pm_latency *odpl;
@@ -206,28 +224,26 @@
c = timespec_sub(b, a);
deact_lat = timespec_to_ns(&c);
- pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time "
- "%llu nsec\n", od->pdev.name, od->pm_lat_level,
- deact_lat);
+ dev_dbg(&od->pdev->dev,
+ "omap_device: pm_lat %d: deactivate: elapsed time "
+ "%llu nsec\n", od->pm_lat_level, deact_lat);
if (deact_lat > odpl->deactivate_lat) {
odpl->deactivate_lat_worst = deact_lat;
if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
odpl->deactivate_lat = deact_lat;
- pr_warning("omap_device: %s.%d: new worst case "
- "deactivate latency %d: %llu\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, deact_lat);
+ dev_dbg(&od->pdev->dev,
+ "new worst case deactivate latency "
+ "%d: %llu\n",
+ od->pm_lat_level, deact_lat);
} else
- pr_warning("omap_device: %s.%d: deactivate "
- "latency %d higher than exptected. "
- "(%llu > %d)\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, deact_lat,
- odpl->deactivate_lat);
+ dev_warn(&od->pdev->dev,
+ "deactivate latency %d "
+ "higher than exptected. (%llu > %d)\n",
+ od->pm_lat_level, deact_lat,
+ odpl->deactivate_lat);
}
-
od->dev_wakeup_lat += odpl->activate_lat;
od->pm_lat_level++;
@@ -245,28 +261,27 @@
if (!clk_alias || !clk_name)
return;
- pr_debug("omap_device: %s: Creating %s -> %s\n",
- dev_name(&od->pdev.dev), clk_alias, clk_name);
+ dev_dbg(&od->pdev->dev, "Creating %s -> %s\n", clk_alias, clk_name);
- r = clk_get_sys(dev_name(&od->pdev.dev), clk_alias);
+ r = clk_get_sys(dev_name(&od->pdev->dev), clk_alias);
if (!IS_ERR(r)) {
- pr_warning("omap_device: %s: alias %s already exists\n",
- dev_name(&od->pdev.dev), clk_alias);
+ dev_warn(&od->pdev->dev,
+ "alias %s already exists\n", clk_alias);
clk_put(r);
return;
}
r = omap_clk_get_by_name(clk_name);
if (IS_ERR(r)) {
- pr_err("omap_device: %s: omap_clk_get_by_name for %s failed\n",
- dev_name(&od->pdev.dev), clk_name);
+ dev_err(&od->pdev->dev,
+ "omap_clk_get_by_name for %s failed\n", clk_name);
return;
}
- l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev.dev));
+ l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev->dev));
if (!l) {
- pr_err("omap_device: %s: clkdev_alloc for %s failed\n",
- dev_name(&od->pdev.dev), clk_alias);
+ dev_err(&od->pdev->dev,
+ "clkdev_alloc for %s failed\n", clk_alias);
return;
}
@@ -304,6 +319,96 @@
}
+static struct dev_pm_domain omap_device_pm_domain;
+
+/**
+ * omap_device_build_from_dt - build an omap_device with multiple hwmods
+ * @pdev_name: name of the platform_device driver to use
+ * @pdev_id: this platform_device's connection ID
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ * @is_early_device: should the device be registered as an early device or not
+ *
+ * Function for building an omap_device already registered from device-tree
+ *
+ * Returns 0 or PTR_ERR() on error.
+ */
+static int omap_device_build_from_dt(struct platform_device *pdev)
+{
+ struct omap_hwmod **hwmods;
+ struct omap_device *od;
+ struct omap_hwmod *oh;
+ struct device_node *node = pdev->dev.of_node;
+ const char *oh_name;
+ int oh_cnt, i, ret = 0;
+
+ oh_cnt = of_property_count_strings(node, "ti,hwmods");
+ if (!oh_cnt || IS_ERR_VALUE(oh_cnt)) {
+ dev_warn(&pdev->dev, "No 'hwmods' to build omap_device\n");
+ return -ENODEV;
+ }
+
+ hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL);
+ if (!hwmods) {
+ ret = -ENOMEM;
+ goto odbfd_exit;
+ }
+
+ for (i = 0; i < oh_cnt; i++) {
+ of_property_read_string_index(node, "ti,hwmods", i, &oh_name);
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh) {
+ dev_err(&pdev->dev, "Cannot lookup hwmod '%s'\n",
+ oh_name);
+ ret = -EINVAL;
+ goto odbfd_exit1;
+ }
+ hwmods[i] = oh;
+ }
+
+ od = omap_device_alloc(pdev, hwmods, oh_cnt, NULL, 0);
+ if (!od) {
+ dev_err(&pdev->dev, "Cannot allocate omap_device for :%s\n",
+ oh_name);
+ ret = PTR_ERR(od);
+ goto odbfd_exit1;
+ }
+
+ if (of_get_property(node, "ti,no_idle_on_suspend", NULL))
+ omap_device_disable_idle_on_suspend(pdev);
+
+ pdev->dev.pm_domain = &omap_device_pm_domain;
+
+odbfd_exit1:
+ kfree(hwmods);
+odbfd_exit:
+ return ret;
+}
+
+static int _omap_device_notifier_call(struct notifier_block *nb,
+ unsigned long event, void *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ switch (event) {
+ case BUS_NOTIFY_ADD_DEVICE:
+ if (pdev->dev.of_node)
+ omap_device_build_from_dt(pdev);
+ break;
+
+ case BUS_NOTIFY_DEL_DEVICE:
+ if (pdev->archdata.od)
+ omap_device_delete(pdev->archdata.od);
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
+
/* Public functions for use by core code */
/**
@@ -343,7 +448,7 @@
* much memory to allocate before calling
* omap_device_fill_resources(). Returns the count.
*/
-int omap_device_count_resources(struct omap_device *od)
+static int omap_device_count_resources(struct omap_device *od)
{
int c = 0;
int i;
@@ -352,7 +457,7 @@
c += omap_hwmod_count_resources(od->hwmods[i]);
pr_debug("omap_device: %s: counted %d total resources across %d "
- "hwmods\n", od->pdev.name, c, od->hwmods_cnt);
+ "hwmods\n", od->pdev->name, c, od->hwmods_cnt);
return c;
}
@@ -374,7 +479,8 @@
* functions to get device resources. Hacking around the existing
* platform_device code wastes memory. Returns 0.
*/
-int omap_device_fill_resources(struct omap_device *od, struct resource *res)
+static int omap_device_fill_resources(struct omap_device *od,
+ struct resource *res)
{
int c = 0;
int i, r;
@@ -389,6 +495,113 @@
}
/**
+ * omap_device_alloc - allocate an omap_device
+ * @pdev: platform_device that will be included in this omap_device
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ *
+ * Convenience function for allocating an omap_device structure and filling
+ * hwmods, resources and pm_latency attributes.
+ *
+ * Returns an struct omap_device pointer or ERR_PTR() on error;
+ */
+static struct omap_device *omap_device_alloc(struct platform_device *pdev,
+ struct omap_hwmod **ohs, int oh_cnt,
+ struct omap_device_pm_latency *pm_lats,
+ int pm_lats_cnt)
+{
+ int ret = -ENOMEM;
+ struct omap_device *od;
+ struct resource *res = NULL;
+ int i, res_count;
+ struct omap_hwmod **hwmods;
+
+ od = kzalloc(sizeof(struct omap_device), GFP_KERNEL);
+ if (!od) {
+ ret = -ENOMEM;
+ goto oda_exit1;
+ }
+ od->hwmods_cnt = oh_cnt;
+
+ hwmods = kmemdup(ohs, sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL);
+ if (!hwmods)
+ goto oda_exit2;
+
+ od->hwmods = hwmods;
+ od->pdev = pdev;
+
+ /*
+ * HACK: Ideally the resources from DT should match, and hwmod
+ * should just add the missing ones. Since the name is not
+ * properly populated by DT, stick to hwmod resources only.
+ */
+ if (pdev->num_resources && pdev->resource)
+ dev_warn(&pdev->dev, "%s(): resources already allocated %d\n",
+ __func__, pdev->num_resources);
+
+ res_count = omap_device_count_resources(od);
+ if (res_count > 0) {
+ dev_dbg(&pdev->dev, "%s(): resources allocated from hwmod %d\n",
+ __func__, res_count);
+ res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
+ if (!res)
+ goto oda_exit3;
+
+ omap_device_fill_resources(od, res);
+
+ ret = platform_device_add_resources(pdev, res, res_count);
+ kfree(res);
+
+ if (ret)
+ goto oda_exit3;
+ }
+
+ if (!pm_lats) {
+ pm_lats = omap_default_latency;
+ pm_lats_cnt = ARRAY_SIZE(omap_default_latency);
+ }
+
+ od->pm_lats_cnt = pm_lats_cnt;
+ od->pm_lats = kmemdup(pm_lats,
+ sizeof(struct omap_device_pm_latency) * pm_lats_cnt,
+ GFP_KERNEL);
+ if (!od->pm_lats)
+ goto oda_exit3;
+
+ pdev->archdata.od = od;
+
+ for (i = 0; i < oh_cnt; i++) {
+ hwmods[i]->od = od;
+ _add_hwmod_clocks_clkdev(od, hwmods[i]);
+ }
+
+ return od;
+
+oda_exit3:
+ kfree(hwmods);
+oda_exit2:
+ kfree(od);
+oda_exit1:
+ dev_err(&pdev->dev, "omap_device: build failed (%d)\n", ret);
+
+ return ERR_PTR(ret);
+}
+
+static void omap_device_delete(struct omap_device *od)
+{
+ if (!od)
+ return;
+
+ od->pdev->archdata.od = NULL;
+ kfree(od->pm_lats);
+ kfree(od->hwmods);
+ kfree(od);
+}
+
+/**
* omap_device_build - build and register an omap_device with one omap_hwmod
* @pdev_name: name of the platform_device driver to use
* @pdev_id: this platform_device's connection ID
@@ -405,7 +618,7 @@
* information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
* passes along the return value of omap_device_build_ss().
*/
-struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
+struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
struct omap_hwmod *oh, void *pdata,
int pdata_len,
struct omap_device_pm_latency *pm_lats,
@@ -438,18 +651,15 @@
* platform_device record. Returns an ERR_PTR() on error, or passes
* along the return value of omap_device_register().
*/
-struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
struct omap_hwmod **ohs, int oh_cnt,
void *pdata, int pdata_len,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt, int is_early_device)
{
int ret = -ENOMEM;
+ struct platform_device *pdev;
struct omap_device *od;
- char *pdev_name2;
- struct resource *res = NULL;
- int i, res_count;
- struct omap_hwmod **hwmods;
if (!ohs || oh_cnt == 0 || !pdev_name)
return ERR_PTR(-EINVAL);
@@ -457,72 +667,40 @@
if (!pdata && pdata_len > 0)
return ERR_PTR(-EINVAL);
- pr_debug("omap_device: %s: building with %d hwmods\n", pdev_name,
- oh_cnt);
+ pdev = platform_device_alloc(pdev_name, pdev_id);
+ if (!pdev) {
+ ret = -ENOMEM;
+ goto odbs_exit;
+ }
- od = kzalloc(sizeof(struct omap_device), GFP_KERNEL);
+ /* Set the dev_name early to allow dev_xxx in omap_device_alloc */
+ if (pdev->id != -1)
+ dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
+ else
+ dev_set_name(&pdev->dev, "%s", pdev->name);
+
+ od = omap_device_alloc(pdev, ohs, oh_cnt, pm_lats, pm_lats_cnt);
if (!od)
- return ERR_PTR(-ENOMEM);
-
- od->hwmods_cnt = oh_cnt;
-
- hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt,
- GFP_KERNEL);
- if (!hwmods)
goto odbs_exit1;
- memcpy(hwmods, ohs, sizeof(struct omap_hwmod *) * oh_cnt);
- od->hwmods = hwmods;
-
- pdev_name2 = kzalloc(strlen(pdev_name) + 1, GFP_KERNEL);
- if (!pdev_name2)
- goto odbs_exit2;
- strcpy(pdev_name2, pdev_name);
-
- od->pdev.name = pdev_name2;
- od->pdev.id = pdev_id;
-
- res_count = omap_device_count_resources(od);
- if (res_count > 0) {
- res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
- if (!res)
- goto odbs_exit3;
- }
- omap_device_fill_resources(od, res);
-
- od->pdev.num_resources = res_count;
- od->pdev.resource = res;
-
- ret = platform_device_add_data(&od->pdev, pdata, pdata_len);
+ ret = platform_device_add_data(pdev, pdata, pdata_len);
if (ret)
- goto odbs_exit4;
-
- od->pm_lats = pm_lats;
- od->pm_lats_cnt = pm_lats_cnt;
+ goto odbs_exit2;
if (is_early_device)
- ret = omap_early_device_register(od);
+ ret = omap_early_device_register(pdev);
else
- ret = omap_device_register(od);
-
- for (i = 0; i < oh_cnt; i++) {
- hwmods[i]->od = od;
- _add_hwmod_clocks_clkdev(od, hwmods[i]);
- }
-
+ ret = omap_device_register(pdev);
if (ret)
- goto odbs_exit4;
+ goto odbs_exit2;
- return od;
+ return pdev;
-odbs_exit4:
- kfree(res);
-odbs_exit3:
- kfree(pdev_name2);
odbs_exit2:
- kfree(hwmods);
+ omap_device_delete(od);
odbs_exit1:
- kfree(od);
+ platform_device_put(pdev);
+odbs_exit:
pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret);
@@ -538,11 +716,11 @@
* platform_early_add_device() on the underlying platform_device.
* Returns 0 by default.
*/
-int omap_early_device_register(struct omap_device *od)
+static int omap_early_device_register(struct platform_device *pdev)
{
struct platform_device *devices[1];
- devices[0] = &(od->pdev);
+ devices[0] = pdev;
early_platform_add_devices(devices, 1);
return 0;
}
@@ -638,13 +816,13 @@
* platform_device_register() on the underlying platform_device.
* Returns the return value of platform_device_register().
*/
-int omap_device_register(struct omap_device *od)
+static int omap_device_register(struct platform_device *pdev)
{
- pr_debug("omap_device: %s: registering\n", od->pdev.name);
+ pr_debug("omap_device: %s: registering\n", pdev->name);
- od->pdev.dev.parent = &omap_device_parent;
- od->pdev.dev.pm_domain = &omap_device_pm_domain;
- return platform_device_register(&od->pdev);
+ pdev->dev.parent = &omap_device_parent;
+ pdev->dev.pm_domain = &omap_device_pm_domain;
+ return platform_device_add(pdev);
}
@@ -671,8 +849,9 @@
od = to_omap_device(pdev);
if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
- WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
- od->pdev.name, od->pdev.id, __func__, od->_state);
+ dev_warn(&pdev->dev,
+ "omap_device: %s() called from invalid state %d\n",
+ __func__, od->_state);
return -EINVAL;
}
@@ -710,8 +889,9 @@
od = to_omap_device(pdev);
if (od->_state != OMAP_DEVICE_STATE_ENABLED) {
- WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
- od->pdev.name, od->pdev.id, __func__, od->_state);
+ dev_warn(&pdev->dev,
+ "omap_device: %s() called from invalid state %d\n",
+ __func__, od->_state);
return -EINVAL;
}
@@ -742,8 +922,9 @@
if (od->_state != OMAP_DEVICE_STATE_ENABLED &&
od->_state != OMAP_DEVICE_STATE_IDLE) {
- WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
- od->pdev.name, od->pdev.id, __func__, od->_state);
+ dev_warn(&pdev->dev,
+ "omap_device: %s() called from invalid state %d\n",
+ __func__, od->_state);
return -EINVAL;
}
@@ -837,6 +1018,42 @@
return omap_hwmod_get_mpu_rt_va(od->hwmods[0]);
}
+/**
+ * omap_device_get_by_hwmod_name() - convert a hwmod name to
+ * device pointer.
+ * @oh_name: name of the hwmod device
+ *
+ * Returns back a struct device * pointer associated with a hwmod
+ * device represented by a hwmod_name
+ */
+struct device *omap_device_get_by_hwmod_name(const char *oh_name)
+{
+ struct omap_hwmod *oh;
+
+ if (!oh_name) {
+ WARN(1, "%s: no hwmod name!\n", __func__);
+ return ERR_PTR(-EINVAL);
+ }
+
+ oh = omap_hwmod_lookup(oh_name);
+ if (IS_ERR_OR_NULL(oh)) {
+ WARN(1, "%s: no hwmod for %s\n", __func__,
+ oh_name);
+ return ERR_PTR(oh ? PTR_ERR(oh) : -ENODEV);
+ }
+ if (IS_ERR_OR_NULL(oh->od)) {
+ WARN(1, "%s: no omap_device for %s\n", __func__,
+ oh_name);
+ return ERR_PTR(oh->od ? PTR_ERR(oh->od) : -ENODEV);
+ }
+
+ if (IS_ERR_OR_NULL(oh->od->pdev))
+ return ERR_PTR(oh->od->pdev ? PTR_ERR(oh->od->pdev) : -ENODEV);
+
+ return &oh->od->pdev->dev;
+}
+EXPORT_SYMBOL(omap_device_get_by_hwmod_name);
+
/*
* Public functions intended for use in omap_device_pm_latency
* .activate_func and .deactivate_func function pointers
@@ -917,8 +1134,13 @@
.parent = &platform_bus,
};
+static struct notifier_block platform_nb = {
+ .notifier_call = _omap_device_notifier_call,
+};
+
static int __init omap_device_init(void)
{
+ bus_register_notifier(&platform_bus_type, &platform_nb);
return device_register(&omap_device_parent);
}
core_initcall(omap_device_init);
diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h
index 3075b9f..3abf304 100644
--- a/arch/arm/plat-orion/include/plat/gpio.h
+++ b/arch/arm/plat-orion/include/plat/gpio.h
@@ -12,15 +12,7 @@
#define __PLAT_GPIO_H
#include <linux/init.h>
-#include <asm-generic/gpio.h>
-
-/*
- * GENERIC_GPIO primitives.
- */
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
+#include <linux/types.h>
/*
* Orion-specific GPIO API extensions.
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index 3aca5ba..f302d04 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -4,7 +4,6 @@
obj-y := dma.o
-obj-$(CONFIG_GENERIC_GPIO) += gpio.o
obj-$(CONFIG_PXA3xx) += mfp.o
obj-$(CONFIG_PXA95x) += mfp.o
obj-$(CONFIG_ARCH_MMP) += mfp.o
diff --git a/arch/arm/plat-pxa/include/plat/gpio-pxa.h b/arch/arm/plat-pxa/include/plat/gpio-pxa.h
new file mode 100644
index 0000000..b6390be
--- /dev/null
+++ b/arch/arm/plat-pxa/include/plat/gpio-pxa.h
@@ -0,0 +1,44 @@
+#ifndef __PLAT_PXA_GPIO_H
+#define __PLAT_PXA_GPIO_H
+
+struct irq_data;
+
+/*
+ * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
+ * one set of registers. The register offsets are organized below:
+ *
+ * GPLR GPDR GPSR GPCR GRER GFER GEDR
+ * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
+ * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
+ * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
+ *
+ * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
+ * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
+ * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
+ *
+ * NOTE:
+ * BANK 3 is only available on PXA27x and later processors.
+ * BANK 4 and 5 are only available on PXA935
+ */
+
+#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n))
+
+#define GPLR_OFFSET 0x00
+#define GPDR_OFFSET 0x0C
+#define GPSR_OFFSET 0x18
+#define GPCR_OFFSET 0x24
+#define GRER_OFFSET 0x30
+#define GFER_OFFSET 0x3C
+#define GEDR_OFFSET 0x48
+
+/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
+ * Those cases currently cause holes in the GPIO number space, the
+ * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
+ */
+extern int pxa_last_gpio;
+
+typedef int (*set_wake_t)(struct irq_data *d, unsigned int on);
+
+extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
+
+#endif /* __PLAT_PXA_GPIO_H */
diff --git a/arch/arm/plat-pxa/include/plat/gpio.h b/arch/arm/plat-pxa/include/plat/gpio.h
index 1ddd2b9..258f772 100644
--- a/arch/arm/plat-pxa/include/plat/gpio.h
+++ b/arch/arm/plat-pxa/include/plat/gpio.h
@@ -1,35 +1,10 @@
#ifndef __PLAT_GPIO_H
#define __PLAT_GPIO_H
-struct irq_data;
+#define __ARM_GPIOLIB_COMPLEX
-/*
- * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
- * one set of registers. The register offsets are organized below:
- *
- * GPLR GPDR GPSR GPCR GRER GFER GEDR
- * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
- * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
- * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
- *
- * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
- * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
- * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
- *
- * NOTE:
- * BANK 3 is only available on PXA27x and later processors.
- * BANK 4 and 5 are only available on PXA935
- */
-
-#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n))
-
-#define GPLR_OFFSET 0x00
-#define GPDR_OFFSET 0x0C
-#define GPSR_OFFSET 0x18
-#define GPCR_OFFSET 0x24
-#define GRER_OFFSET 0x30
-#define GFER_OFFSET 0x3C
-#define GEDR_OFFSET 0x48
+/* The individual machine provides register offsets and NR_BUILTIN_GPIO */
+#include <mach/gpio-pxa.h>
static inline int gpio_get_value(unsigned gpio)
{
@@ -52,13 +27,4 @@
#define gpio_cansleep __gpio_cansleep
-/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
- * Those cases currently cause holes in the GPIO number space, the
- * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
- */
-extern int pxa_last_gpio;
-
-typedef int (*set_wake_t)(struct irq_data *d, unsigned int on);
-
-extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
#endif /* __PLAT_GPIO_H */
diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c
index f88216d..c65eb79 100644
--- a/arch/arm/plat-s5p/irq-gpioint.c
+++ b/arch/arm/plat-s5p/irq-gpioint.c
@@ -163,9 +163,9 @@
ct->chip.irq_mask = irq_gc_mask_set_bit;
ct->chip.irq_unmask = irq_gc_mask_clr_bit;
ct->chip.irq_set_type = s5p_gpioint_set_type,
- ct->regs.ack = PEND_OFFSET + REG_OFFSET(chip->group);
- ct->regs.mask = MASK_OFFSET + REG_OFFSET(chip->group);
- ct->regs.type = CON_OFFSET + REG_OFFSET(chip->group);
+ ct->regs.ack = PEND_OFFSET + REG_OFFSET(group - bank->start);
+ ct->regs.mask = MASK_OFFSET + REG_OFFSET(group - bank->start);
+ ct->regs.type = CON_OFFSET + REG_OFFSET(group - bank->start);
irq_setup_generic_chip(gc, IRQ_MSK(chip->chip.ngpio),
IRQ_GC_INIT_MASK_CACHE,
IRQ_NOREQUEST | IRQ_NOPROBE, 0);
diff --git a/arch/arm/plat-spear/include/plat/gpio.h b/arch/arm/plat-spear/include/plat/gpio.h
index b857c91..40a8c17 100644
--- a/arch/arm/plat-spear/include/plat/gpio.h
+++ b/arch/arm/plat-spear/include/plat/gpio.h
@@ -1,24 +1 @@
-/*
- * arch/arm/plat-spear/include/plat/gpio.h
- *
- * GPIO macros for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_GPIO_H
-#define __PLAT_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
-#endif /* __PLAT_GPIO_H */
+/* empty */
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 177cdaf..b122adc 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -24,6 +24,7 @@
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select HAVE_ARCH_JUMP_LABEL
+ select IRQ_FORCED_THREADING
menu "Machine selection"
@@ -722,6 +723,7 @@
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_HOTPLUG_CPU
select SYS_HAS_CPU_CAVIUM_OCTEON
+ select HOLES_IN_ZONE
help
The Octeon simulator is software performance model of the Cavium
Octeon Processor. It supports simulating Octeon processors on x86
@@ -744,6 +746,7 @@
select ZONE_DMA32
select USB_ARCH_HAS_OHCI
select USB_ARCH_HAS_EHCI
+ select HOLES_IN_ZONE
help
This option supports all of the Octeon reference boards from Cavium
Networks. It builds a kernel that dynamically determines the Octeon
@@ -973,6 +976,9 @@
config GENERIC_GPIO
bool
+config HOLES_IN_ZONE
+ bool
+
#
# Endianess selection. Sufficiently obscure so many users don't know what to
# answer,so we try hard to limit the available choices. Also the use of a
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 3b2c18b..f72c48d 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -492,7 +492,7 @@
memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6);
ret = platform_device_register(&au1xxx_eth0_device);
- if (!ret)
+ if (ret)
printk(KERN_INFO "Alchemy: failed to register MAC0\n");
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index 647e518..b86324a 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -158,15 +158,21 @@
void au_sleep(void)
{
- int cpuid = alchemy_get_cputype();
- if (cpuid != ALCHEMY_CPU_UNKNOWN) {
- save_core_regs();
- if (cpuid <= ALCHEMY_CPU_AU1500)
- alchemy_sleep_au1000();
- else if (cpuid <= ALCHEMY_CPU_AU1200)
- alchemy_sleep_au1550();
- restore_core_regs();
+ save_core_regs();
+
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000:
+ case ALCHEMY_CPU_AU1500:
+ case ALCHEMY_CPU_AU1100:
+ alchemy_sleep_au1000();
+ break;
+ case ALCHEMY_CPU_AU1550:
+ case ALCHEMY_CPU_AU1200:
+ alchemy_sleep_au1550();
+ break;
}
+
+ restore_core_regs();
}
#endif /* CONFIG_PM */
diff --git a/arch/mips/alchemy/devboards/bcsr.c b/arch/mips/alchemy/devboards/bcsr.c
index 596ad00..463d2c4 100644
--- a/arch/mips/alchemy/devboards/bcsr.c
+++ b/arch/mips/alchemy/devboards/bcsr.c
@@ -89,8 +89,12 @@
{
unsigned short bisr = __raw_readw(bcsr_virt + BCSR_REG_INTSTAT);
+ disable_irq_nosync(irq);
+
for ( ; bisr; bisr &= bisr - 1)
generic_handle_irq(bcsr_csc_base + __ffs(bisr));
+
+ enable_irq(irq);
}
/* NOTE: both the enable and mask bits must be cleared, otherwise the
diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c
index 1dac4f2..4a89800 100644
--- a/arch/mips/alchemy/devboards/db1200/setup.c
+++ b/arch/mips/alchemy/devboards/db1200/setup.c
@@ -23,13 +23,6 @@
unsigned long freq0, clksrc, div, pfc;
unsigned short whoami;
- /* Set Config[OD] (disable overlapping bus transaction):
- * This gets rid of a _lot_ of spurious interrupts (especially
- * wrt. IDE); but incurs ~10% performance hit in some
- * cpu-bound applications.
- */
- set_c0_config(1 << 19);
-
bcsr_init(DB1200_BCSR_PHYS_ADDR,
DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
diff --git a/arch/mips/ar7/irq.c b/arch/mips/ar7/irq.c
index 03db3da..88c4bab 100644
--- a/arch/mips/ar7/irq.c
+++ b/arch/mips/ar7/irq.c
@@ -98,7 +98,8 @@
static struct irqaction ar7_cascade_action = {
.handler = no_action,
- .name = "AR7 cascade interrupt"
+ .name = "AR7 cascade interrupt",
+ .flags = IRQF_NO_THREAD,
};
static void __init ar7_irq_init(int base)
diff --git a/arch/mips/bcm63xx/irq.c b/arch/mips/bcm63xx/irq.c
index cea6021c..162e11b 100644
--- a/arch/mips/bcm63xx/irq.c
+++ b/arch/mips/bcm63xx/irq.c
@@ -222,6 +222,7 @@
static struct irqaction cpu_ip2_cascade_action = {
.handler = no_action,
.name = "cascade_ip2",
+ .flags = IRQF_NO_THREAD,
};
void __init arch_init_irq(void)
diff --git a/arch/mips/cobalt/irq.c b/arch/mips/cobalt/irq.c
index cb9bf82..965c777 100644
--- a/arch/mips/cobalt/irq.c
+++ b/arch/mips/cobalt/irq.c
@@ -48,6 +48,7 @@
static struct irqaction cascade = {
.handler = no_action,
.name = "cascade",
+ .flags = IRQF_NO_THREAD,
};
void __init arch_init_irq(void)
diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c
index fa45e92..f7b7ba6 100644
--- a/arch/mips/dec/setup.c
+++ b/arch/mips/dec/setup.c
@@ -101,20 +101,24 @@
static struct irqaction ioirq = {
.handler = no_action,
.name = "cascade",
+ .flags = IRQF_NO_THREAD,
};
static struct irqaction fpuirq = {
.handler = no_action,
.name = "fpu",
+ .flags = IRQF_NO_THREAD,
};
static struct irqaction busirq = {
.flags = IRQF_DISABLED,
.name = "bus error",
+ .flags = IRQF_NO_THREAD,
};
static struct irqaction haltirq = {
.handler = dec_intr_halt,
.name = "halt",
+ .flags = IRQF_NO_THREAD,
};
diff --git a/arch/mips/emma/markeins/irq.c b/arch/mips/emma/markeins/irq.c
index 3dbd7a5..7798887 100644
--- a/arch/mips/emma/markeins/irq.c
+++ b/arch/mips/emma/markeins/irq.c
@@ -169,7 +169,7 @@
static struct irqaction irq_cascade = {
.handler = no_action,
- .flags = 0,
+ .flags = IRQF_NO_THREAD,
.name = "cascade",
.dev_id = NULL,
.next = NULL,
diff --git a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
index 0d5a42b..a58addb 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
@@ -54,7 +54,6 @@
#define cpu_has_mips_r2_exec_hazard 0
#define cpu_has_dsp 0
#define cpu_has_mipsmt 0
-#define cpu_has_userlocal 0
#define cpu_has_vint 0
#define cpu_has_veic 0
#define cpu_hwrena_impl_bits 0xc0000000
diff --git a/arch/mips/include/asm/mach-powertv/dma-coherence.h b/arch/mips/include/asm/mach-powertv/dma-coherence.h
index 62c0940..3537164 100644
--- a/arch/mips/include/asm/mach-powertv/dma-coherence.h
+++ b/arch/mips/include/asm/mach-powertv/dma-coherence.h
@@ -13,7 +13,6 @@
#define __ASM_MACH_POWERTV_DMA_COHERENCE_H
#include <linux/sched.h>
-#include <linux/version.h>
#include <linux/device.h>
#include <asm/mach-powertv/asic.h>
diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h
index b4ba244..cb41af5 100644
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -195,9 +195,9 @@
* to cover the pipeline delay.
*/
.set mips32
- mfc0 v1, CP0_TCSTATUS
+ mfc0 k0, CP0_TCSTATUS
.set mips0
- LONG_S v1, PT_TCSTATUS(sp)
+ LONG_S k0, PT_TCSTATUS(sp)
#endif /* CONFIG_MIPS_MT_SMTC */
LONG_S $4, PT_R4(sp)
LONG_S $5, PT_R5(sp)
diff --git a/arch/mips/jz4740/gpio.c b/arch/mips/jz4740/gpio.c
index 73031f7..4397972 100644
--- a/arch/mips/jz4740/gpio.c
+++ b/arch/mips/jz4740/gpio.c
@@ -18,7 +18,7 @@
#include <linux/init.h>
#include <linux/spinlock.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/delay.h>
@@ -86,7 +86,6 @@
spinlock_t lock;
struct gpio_chip gpio_chip;
- struct sys_device sysdev;
};
static struct jz_gpio_chip jz4740_gpio_chips[];
@@ -459,49 +458,47 @@
JZ4740_GPIO_CHIP(D),
};
-static inline struct jz_gpio_chip *sysdev_to_chip(struct sys_device *dev)
+static void jz4740_gpio_suspend_chip(struct jz_gpio_chip *chip)
{
- return container_of(dev, struct jz_gpio_chip, sysdev);
-}
-
-static int jz4740_gpio_suspend(struct sys_device *dev, pm_message_t state)
-{
- struct jz_gpio_chip *chip = sysdev_to_chip(dev);
-
chip->suspend_mask = readl(chip->base + JZ_REG_GPIO_MASK);
writel(~(chip->wakeup), chip->base + JZ_REG_GPIO_MASK_SET);
writel(chip->wakeup, chip->base + JZ_REG_GPIO_MASK_CLEAR);
+}
+
+static int jz4740_gpio_suspend(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); i++)
+ jz4740_gpio_suspend_chip(&jz4740_gpio_chips[i]);
return 0;
}
-static int jz4740_gpio_resume(struct sys_device *dev)
+static void jz4740_gpio_resume_chip(struct jz_gpio_chip *chip)
{
- struct jz_gpio_chip *chip = sysdev_to_chip(dev);
uint32_t mask = chip->suspend_mask;
writel(~mask, chip->base + JZ_REG_GPIO_MASK_CLEAR);
writel(mask, chip->base + JZ_REG_GPIO_MASK_SET);
-
- return 0;
}
-static struct sysdev_class jz4740_gpio_sysdev_class = {
- .name = "gpio",
+static void jz4740_gpio_resume(void)
+{
+ int i;
+
+ for (i = ARRAY_SIZE(jz4740_gpio_chips) - 1; i >= 0 ; i--)
+ jz4740_gpio_resume_chip(&jz4740_gpio_chips[i]);
+}
+
+static struct syscore_ops jz4740_gpio_syscore_ops = {
.suspend = jz4740_gpio_suspend,
.resume = jz4740_gpio_resume,
};
-static int jz4740_gpio_chip_init(struct jz_gpio_chip *chip, unsigned int id)
+static void jz4740_gpio_chip_init(struct jz_gpio_chip *chip, unsigned int id)
{
- int ret, irq;
-
- chip->sysdev.id = id;
- chip->sysdev.cls = &jz4740_gpio_sysdev_class;
- ret = sysdev_register(&chip->sysdev);
-
- if (ret)
- return ret;
+ int irq;
spin_lock_init(&chip->lock);
@@ -519,22 +516,17 @@
irq_set_chip_and_handler(irq, &jz_gpio_irq_chip,
handle_level_irq);
}
-
- return 0;
}
static int __init jz4740_gpio_init(void)
{
unsigned int i;
- int ret;
-
- ret = sysdev_class_register(&jz4740_gpio_sysdev_class);
- if (ret)
- return ret;
for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); ++i)
jz4740_gpio_chip_init(&jz4740_gpio_chips[i], i);
+ register_syscore_ops(&jz4740_gpio_syscore_ops);
+
printk(KERN_INFO "JZ4740 GPIO initialized\n");
return 0;
diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c
index feb8021..6a2d758 100644
--- a/arch/mips/kernel/ftrace.c
+++ b/arch/mips/kernel/ftrace.c
@@ -19,6 +19,26 @@
#include <asm-generic/sections.h>
+#if defined(KBUILD_MCOUNT_RA_ADDRESS) && defined(CONFIG_32BIT)
+#define MCOUNT_OFFSET_INSNS 5
+#else
+#define MCOUNT_OFFSET_INSNS 4
+#endif
+
+/*
+ * Check if the address is in kernel space
+ *
+ * Clone core_kernel_text() from kernel/extable.c, but doesn't call
+ * init_kernel_text() for Ftrace doesn't trace functions in init sections.
+ */
+static inline int in_kernel_space(unsigned long ip)
+{
+ if (ip >= (unsigned long)_stext &&
+ ip <= (unsigned long)_etext)
+ return 1;
+ return 0;
+}
+
#ifdef CONFIG_DYNAMIC_FTRACE
#define JAL 0x0c000000 /* jump & link: ip --> ra, jump to target */
@@ -54,20 +74,6 @@
#endif
}
-/*
- * Check if the address is in kernel space
- *
- * Clone core_kernel_text() from kernel/extable.c, but doesn't call
- * init_kernel_text() for Ftrace doesn't trace functions in init sections.
- */
-static inline int in_kernel_space(unsigned long ip)
-{
- if (ip >= (unsigned long)_stext &&
- ip <= (unsigned long)_etext)
- return 1;
- return 0;
-}
-
static int ftrace_modify_code(unsigned long ip, unsigned int new_code)
{
int faulted;
@@ -112,11 +118,6 @@
* 1: offset = 4 instructions
*/
-#if defined(KBUILD_MCOUNT_RA_ADDRESS) && defined(CONFIG_32BIT)
-#define MCOUNT_OFFSET_INSNS 5
-#else
-#define MCOUNT_OFFSET_INSNS 4
-#endif
#define INSN_B_1F (0x10000000 | MCOUNT_OFFSET_INSNS)
int ftrace_make_nop(struct module *mod,
diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c
index 5c74eb7..32b397b 100644
--- a/arch/mips/kernel/i8259.c
+++ b/arch/mips/kernel/i8259.c
@@ -229,7 +229,7 @@
*/
if (i8259A_auto_eoi >= 0) {
outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
- outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */
+ outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */
}
}
@@ -295,6 +295,7 @@
static struct irqaction irq2 = {
.handler = no_action,
.name = "cascade",
+ .flags = IRQF_NO_THREAD,
};
static struct resource pic1_io_resource = {
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 876a75c..922a554 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -349,3 +349,10 @@
return sys_fanotify_mark(fanotify_fd, flags, merge_64(a3, a4),
dfd, pathname);
}
+
+SYSCALL_DEFINE6(32_futex, u32 __user *, uaddr, int, op, u32, val,
+ struct compat_timespec __user *, utime, u32 __user *, uaddr2,
+ u32, val3)
+{
+ return compat_sys_futex(uaddr, op, val, utime, uaddr2, val3);
+}
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index f9296e8..6de1f59 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -315,7 +315,7 @@
PTR sys_fremovexattr
PTR sys_tkill
PTR sys_ni_syscall
- PTR compat_sys_futex
+ PTR sys_32_futex
PTR compat_sys_sched_setaffinity /* 6195 */
PTR compat_sys_sched_getaffinity
PTR sys_cacheflush
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 4d7c982..1d81316 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -441,7 +441,7 @@
PTR sys_fremovexattr /* 4235 */
PTR sys_tkill
PTR sys_sendfile64
- PTR compat_sys_futex
+ PTR sys_32_futex
PTR compat_sys_sched_setaffinity
PTR compat_sys_sched_getaffinity /* 4240 */
PTR compat_sys_io_setup
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index dbbe0ce..f852400 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -8,6 +8,7 @@
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
#include <linux/cache.h>
+#include <linux/irqflags.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/personality.h>
@@ -658,6 +659,8 @@
asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused,
__u32 thread_info_flags)
{
+ local_irq_enable();
+
/* deal with pending signal delivery */
if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
do_signal(regs);
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index b7517e3..cbea618 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -14,6 +14,7 @@
#include <linux/bug.h>
#include <linux/compiler.h>
#include <linux/init.h>
+#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/sched.h>
@@ -364,21 +365,26 @@
return (regs->cp0_cause >> 2) & 0x1f;
}
-static DEFINE_SPINLOCK(die_lock);
+static DEFINE_RAW_SPINLOCK(die_lock);
void __noreturn die(const char *str, struct pt_regs *regs)
{
static int die_counter;
int sig = SIGSEGV;
#ifdef CONFIG_MIPS_MT_SMTC
- unsigned long dvpret = dvpe();
+ unsigned long dvpret;
#endif /* CONFIG_MIPS_MT_SMTC */
+ oops_enter();
+
if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV) == NOTIFY_STOP)
sig = 0;
console_verbose();
- spin_lock_irq(&die_lock);
+ raw_spin_lock_irq(&die_lock);
+#ifdef CONFIG_MIPS_MT_SMTC
+ dvpret = dvpe();
+#endif /* CONFIG_MIPS_MT_SMTC */
bust_spinlocks(1);
#ifdef CONFIG_MIPS_MT_SMTC
mips_mt_regdump(dvpret);
@@ -387,7 +393,9 @@
printk("%s[#%d]:\n", str, ++die_counter);
show_registers(regs);
add_taint(TAINT_DIE);
- spin_unlock_irq(&die_lock);
+ raw_spin_unlock_irq(&die_lock);
+
+ oops_exit();
if (in_interrupt())
panic("Fatal exception in interrupt");
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 2cd50ad..3efcb06 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -192,7 +192,7 @@
}
spin_unlock(&vpecontrol.tc_list_lock);
- return NULL;
+ return res;
}
/* allocate a vpe and associate it with this minor (or index) */
diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
index fc89795..f9737bb 100644
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
@@ -123,11 +123,10 @@
static unsigned int ltq_startup_eiu_irq(struct irq_data *d)
{
int i;
- int irq_nr = d->irq - INT_NUM_IRQ0;
ltq_enable_irq(d);
for (i = 0; i < MAX_EIU; i++) {
- if (irq_nr == ltq_eiu_irq[i]) {
+ if (d->irq == ltq_eiu_irq[i]) {
/* low level - we should really handle set_type */
ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_C) |
(0x6 << (i * 4)), LTQ_EIU_EXIN_C);
@@ -147,11 +146,10 @@
static void ltq_shutdown_eiu_irq(struct irq_data *d)
{
int i;
- int irq_nr = d->irq - INT_NUM_IRQ0;
ltq_disable_irq(d);
for (i = 0; i < MAX_EIU; i++) {
- if (irq_nr == ltq_eiu_irq[i]) {
+ if (d->irq == ltq_eiu_irq[i]) {
/* disable */
ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) & ~(1 << i),
LTQ_EIU_EXIN_INEN);
diff --git a/arch/mips/lantiq/xway/ebu.c b/arch/mips/lantiq/xway/ebu.c
index 66eb52f..033b318 100644
--- a/arch/mips/lantiq/xway/ebu.c
+++ b/arch/mips/lantiq/xway/ebu.c
@@ -10,7 +10,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/ioport.h>
#include <lantiq_soc.h>
diff --git a/arch/mips/lantiq/xway/pmu.c b/arch/mips/lantiq/xway/pmu.c
index 9d69f01e..39f0d26 100644
--- a/arch/mips/lantiq/xway/pmu.c
+++ b/arch/mips/lantiq/xway/pmu.c
@@ -8,7 +8,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/ioport.h>
#include <lantiq_soc.h>
diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c
index de4c165..d608b6e 100644
--- a/arch/mips/lasat/interrupt.c
+++ b/arch/mips/lasat/interrupt.c
@@ -105,6 +105,7 @@
static struct irqaction cascade = {
.handler = no_action,
.name = "cascade",
+ .flags = IRQF_NO_THREAD,
};
void __init arch_init_irq(void)
diff --git a/arch/mips/loongson/fuloong-2e/irq.c b/arch/mips/loongson/fuloong-2e/irq.c
index d61a042..3cf1fef 100644
--- a/arch/mips/loongson/fuloong-2e/irq.c
+++ b/arch/mips/loongson/fuloong-2e/irq.c
@@ -42,6 +42,7 @@
static struct irqaction cascade_irqaction = {
.handler = no_action,
.name = "cascade",
+ .flags = IRQF_NO_THREAD,
};
void __init mach_init_irq(void)
diff --git a/arch/mips/loongson/lemote-2f/irq.c b/arch/mips/loongson/lemote-2f/irq.c
index 081db10..14b0818 100644
--- a/arch/mips/loongson/lemote-2f/irq.c
+++ b/arch/mips/loongson/lemote-2f/irq.c
@@ -96,12 +96,13 @@
struct irqaction ip6_irqaction = {
.handler = ip6_action,
.name = "cascade",
- .flags = IRQF_SHARED,
+ .flags = IRQF_SHARED | IRQF_NO_THREAD,
};
struct irqaction cascade_irqaction = {
.handler = no_action,
.name = "cascade",
+ .flags = IRQF_NO_THREAD,
};
void __init mach_init_irq(void)
diff --git a/arch/mips/mm/mmap.c b/arch/mips/mm/mmap.c
index 9ff5d0f..302d779 100644
--- a/arch/mips/mm/mmap.c
+++ b/arch/mips/mm/mmap.c
@@ -6,6 +6,7 @@
* Copyright (C) 2011 Wind River Systems,
* written by Ralf Baechle <ralf@linux-mips.org>
*/
+#include <linux/compiler.h>
#include <linux/errno.h>
#include <linux/mm.h>
#include <linux/mman.h>
@@ -15,12 +16,11 @@
#include <linux/sched.h>
unsigned long shm_align_mask = PAGE_SIZE - 1; /* Sane caches */
-
EXPORT_SYMBOL(shm_align_mask);
/* gap between mmap and stack */
#define MIN_GAP (128*1024*1024UL)
-#define MAX_GAP ((TASK_SIZE)/6*5)
+#define MAX_GAP ((TASK_SIZE)/6*5)
static int mmap_is_legacy(void)
{
@@ -57,13 +57,13 @@
return base - off;
}
-#define COLOUR_ALIGN(addr,pgoff) \
+#define COLOUR_ALIGN(addr, pgoff) \
((((addr) + shm_align_mask) & ~shm_align_mask) + \
(((pgoff) << PAGE_SHIFT) & shm_align_mask))
enum mmap_allocation_direction {UP, DOWN};
-static unsigned long arch_get_unmapped_area_foo(struct file *filp,
+static unsigned long arch_get_unmapped_area_common(struct file *filp,
unsigned long addr0, unsigned long len, unsigned long pgoff,
unsigned long flags, enum mmap_allocation_direction dir)
{
@@ -103,16 +103,16 @@
vma = find_vma(mm, addr);
if (TASK_SIZE - len >= addr &&
- (!vma || addr + len <= vma->vm_start))
+ (!vma || addr + len <= vma->vm_start))
return addr;
}
if (dir == UP) {
addr = mm->mmap_base;
- if (do_color_align)
- addr = COLOUR_ALIGN(addr, pgoff);
- else
- addr = PAGE_ALIGN(addr);
+ if (do_color_align)
+ addr = COLOUR_ALIGN(addr, pgoff);
+ else
+ addr = PAGE_ALIGN(addr);
for (vma = find_vma(current->mm, addr); ; vma = vma->vm_next) {
/* At this point: (!vma || addr < vma->vm_end). */
@@ -131,28 +131,30 @@
mm->free_area_cache = mm->mmap_base;
}
- /* either no address requested or can't fit in requested address hole */
+ /*
+ * either no address requested, or the mapping can't fit into
+ * the requested address hole
+ */
addr = mm->free_area_cache;
- if (do_color_align) {
- unsigned long base =
- COLOUR_ALIGN_DOWN(addr - len, pgoff);
-
+ if (do_color_align) {
+ unsigned long base =
+ COLOUR_ALIGN_DOWN(addr - len, pgoff);
addr = base + len;
- }
+ }
/* make sure it can fit in the remaining address space */
if (likely(addr > len)) {
vma = find_vma(mm, addr - len);
if (!vma || addr <= vma->vm_start) {
- /* remember the address as a hint for next time */
- return mm->free_area_cache = addr-len;
+ /* cache the address as a hint for next time */
+ return mm->free_area_cache = addr - len;
}
}
if (unlikely(mm->mmap_base < len))
goto bottomup;
- addr = mm->mmap_base-len;
+ addr = mm->mmap_base - len;
if (do_color_align)
addr = COLOUR_ALIGN_DOWN(addr, pgoff);
@@ -163,8 +165,8 @@
* return with success:
*/
vma = find_vma(mm, addr);
- if (likely(!vma || addr+len <= vma->vm_start)) {
- /* remember the address as a hint for next time */
+ if (likely(!vma || addr + len <= vma->vm_start)) {
+ /* cache the address as a hint for next time */
return mm->free_area_cache = addr;
}
@@ -173,7 +175,7 @@
mm->cached_hole_size = vma->vm_start - addr;
/* try just below the current vma->vm_start */
- addr = vma->vm_start-len;
+ addr = vma->vm_start - len;
if (do_color_align)
addr = COLOUR_ALIGN_DOWN(addr, pgoff);
} while (likely(len < vma->vm_start));
@@ -201,7 +203,7 @@
unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr0,
unsigned long len, unsigned long pgoff, unsigned long flags)
{
- return arch_get_unmapped_area_foo(filp,
+ return arch_get_unmapped_area_common(filp,
addr0, len, pgoff, flags, UP);
}
@@ -213,7 +215,7 @@
unsigned long addr0, unsigned long len, unsigned long pgoff,
unsigned long flags)
{
- return arch_get_unmapped_area_foo(filp,
+ return arch_get_unmapped_area_common(filp,
addr0, len, pgoff, flags, DOWN);
}
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index b6e1cff..e06370f 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -1759,14 +1759,13 @@
u32 *p = handle_tlbm;
struct uasm_label *l = labels;
struct uasm_reloc *r = relocs;
- struct work_registers wr;
memset(handle_tlbm, 0, sizeof(handle_tlbm));
memset(labels, 0, sizeof(labels));
memset(relocs, 0, sizeof(relocs));
build_r3000_tlbchange_handler_head(&p, K0, K1);
- build_pte_modifiable(&p, &r, wr.r1, wr.r2, wr.r3, label_nopage_tlbm);
+ build_pte_modifiable(&p, &r, K0, K1, -1, label_nopage_tlbm);
uasm_i_nop(&p); /* load delay */
build_make_write(&p, &r, K0, K1);
build_r3000_pte_reload_tlbwi(&p, K0, K1);
@@ -1963,7 +1962,8 @@
uasm_i_andi(&p, wr.r3, wr.r3, 2);
uasm_il_beqz(&p, &r, wr.r3, label_tlbl_goaround2);
}
-
+ if (PM_DEFAULT_MASK == 0)
+ uasm_i_nop(&p);
/*
* We clobbered C0_PAGEMASK, restore it. On the other branch
* it is restored in build_huge_tlb_write_entry.
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index 1d36c511..d53ff91 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -350,12 +350,14 @@
static struct irqaction i8259irq = {
.handler = no_action,
- .name = "XT-PIC cascade"
+ .name = "XT-PIC cascade",
+ .flags = IRQF_NO_THREAD,
};
static struct irqaction corehi_irqaction = {
.handler = no_action,
- .name = "CoreHi"
+ .name = "CoreHi",
+ .flags = IRQF_NO_THREAD,
};
static msc_irqmap_t __initdata msc_irqmap[] = {
diff --git a/arch/mips/netlogic/xlr/Makefile b/arch/mips/netlogic/xlr/Makefile
index 9bd3f73..2dca585 100644
--- a/arch/mips/netlogic/xlr/Makefile
+++ b/arch/mips/netlogic/xlr/Makefile
@@ -2,4 +2,4 @@
obj-$(CONFIG_SMP) += smp.o smpboot.o
obj-$(CONFIG_EARLY_PRINTK) += xlr_console.o
-EXTRA_CFLAGS += -Werror
+ccflags-y += -Werror
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
index 603d749..8656388 100644
--- a/arch/mips/pci/pci-lantiq.c
+++ b/arch/mips/pci/pci-lantiq.c
@@ -171,8 +171,13 @@
u32 temp_buffer;
/* set clock to 33Mhz */
- ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~0xf00000, LTQ_CGU_IFCCR);
- ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | 0x800000, LTQ_CGU_IFCCR);
+ if (ltq_is_ar9()) {
+ ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~0x1f00000, LTQ_CGU_IFCCR);
+ ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | 0xe00000, LTQ_CGU_IFCCR);
+ } else {
+ ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~0xf00000, LTQ_CGU_IFCCR);
+ ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | 0x800000, LTQ_CGU_IFCCR);
+ }
/* external or internal clock ? */
if (conf->clock) {
diff --git a/arch/mips/pci/pci-rc32434.c b/arch/mips/pci/pci-rc32434.c
index 764362c..5f3a69c 100644
--- a/arch/mips/pci/pci-rc32434.c
+++ b/arch/mips/pci/pci-rc32434.c
@@ -215,7 +215,7 @@
rc32434_pcibridge_init();
io_map_base = ioremap(rc32434_res_pci_io1.start,
- resource_size(&rcrc32434_res_pci_io1));
+ resource_size(&rc32434_res_pci_io1));
if (!io_map_base)
return -ENOMEM;
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq.c b/arch/mips/pmc-sierra/msp71xx/msp_irq.c
index 4531c4a..d3c3d81 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_irq.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_irq.c
@@ -108,12 +108,14 @@
static struct irqaction cic_cascade_msp = {
.handler = no_action,
- .name = "MSP CIC cascade"
+ .name = "MSP CIC cascade",
+ .flags = IRQF_NO_THREAD,
};
static struct irqaction per_cascade_msp = {
.handler = no_action,
- .name = "MSP PER cascade"
+ .name = "MSP PER cascade",
+ .flags = IRQF_NO_THREAD,
};
void __init arch_init_irq(void)
diff --git a/arch/mips/pnx8550/common/int.c b/arch/mips/pnx8550/common/int.c
index 6b93c81..1ebe22b 100644
--- a/arch/mips/pnx8550/common/int.c
+++ b/arch/mips/pnx8550/common/int.c
@@ -167,7 +167,7 @@
static struct irqaction gic_action = {
.handler = no_action,
- .flags = IRQF_DISABLED,
+ .flags = IRQF_DISABLED | IRQF_NO_THREAD,
.name = "GIC",
};
diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c
index b4d08e4..f72c336 100644
--- a/arch/mips/sgi-ip22/ip22-int.c
+++ b/arch/mips/sgi-ip22/ip22-int.c
@@ -155,32 +155,32 @@
static struct irqaction local0_cascade = {
.handler = no_action,
- .flags = IRQF_DISABLED,
+ .flags = IRQF_DISABLED | IRQF_NO_THREAD,
.name = "local0 cascade",
};
static struct irqaction local1_cascade = {
.handler = no_action,
- .flags = IRQF_DISABLED,
+ .flags = IRQF_DISABLED | IRQF_NO_THREAD,
.name = "local1 cascade",
};
static struct irqaction buserr = {
.handler = no_action,
- .flags = IRQF_DISABLED,
+ .flags = IRQF_DISABLED | IRQF_NO_THREAD,
.name = "Bus Error",
};
static struct irqaction map0_cascade = {
.handler = no_action,
- .flags = IRQF_DISABLED,
+ .flags = IRQF_DISABLED | IRQF_NO_THREAD,
.name = "mapable0 cascade",
};
#ifdef USE_LIO3_IRQ
static struct irqaction map1_cascade = {
.handler = no_action,
- .flags = IRQF_DISABLED,
+ .flags = IRQF_DISABLED | IRQF_NO_THREAD,
.name = "mapable1 cascade",
};
#define SGI_INTERRUPTS SGINT_END
diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c
index a7e5a6d..3ab5b5d 100644
--- a/arch/mips/sni/rm200.c
+++ b/arch/mips/sni/rm200.c
@@ -359,6 +359,7 @@
static struct irqaction sni_rm200_irq2 = {
.handler = no_action,
.name = "cascade",
+ .flags = IRQF_NO_THREAD,
};
static struct resource sni_rm200_pic1_resource = {
diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c
index 70a3b85..fad2bef 100644
--- a/arch/mips/vr41xx/common/irq.c
+++ b/arch/mips/vr41xx/common/irq.c
@@ -34,6 +34,7 @@
static struct irqaction cascade_irqaction = {
.handler = no_action,
.name = "cascade",
+ .flags = IRQF_NO_THREAD,
};
int cascade_irq(unsigned int irq, int (*get_irq)(unsigned int))
diff --git a/arch/sparc/include/asm/pgtsrmmu.h b/arch/sparc/include/asm/pgtsrmmu.h
index 1407c07..f6ae2b2 100644
--- a/arch/sparc/include/asm/pgtsrmmu.h
+++ b/arch/sparc/include/asm/pgtsrmmu.h
@@ -280,7 +280,7 @@
return retval;
}
#else
-#define srmmu_hwprobe(addr) (srmmu_swprobe(addr, 0) & SRMMU_PTE_PMASK)
+#define srmmu_hwprobe(addr) srmmu_swprobe(addr, 0)
#endif
static inline int
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 1e94f94..8aa0d44 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -230,7 +230,8 @@
res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2];
} else if (i == dev->rom_base_reg) {
res = &dev->resource[PCI_ROM_RESOURCE];
- flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
+ flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE
+ | IORESOURCE_SIZEALIGN;
} else {
printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i);
continue;
diff --git a/arch/sparc/kernel/signal32.c b/arch/sparc/kernel/signal32.c
index 1ba95af..2caa556 100644
--- a/arch/sparc/kernel/signal32.c
+++ b/arch/sparc/kernel/signal32.c
@@ -273,10 +273,7 @@
case 1: set.sig[0] = seta[0] + (((long)seta[1]) << 32);
}
sigdelsetmask(&set, ~_BLOCKABLE);
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ set_current_blocked(&set);
return;
segv:
@@ -377,10 +374,7 @@
case 1: set.sig[0] = seta.sig[0] + (((long)seta.sig[1]) << 32);
}
sigdelsetmask(&set, ~_BLOCKABLE);
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ set_current_blocked(&set);
return;
segv:
force_sig(SIGSEGV, current);
@@ -782,6 +776,7 @@
siginfo_t *info,
sigset_t *oldset, struct pt_regs *regs)
{
+ sigset_t blocked;
int err;
if (ka->sa.sa_flags & SA_SIGINFO)
@@ -792,12 +787,10 @@
if (err)
return err;
- spin_lock_irq(¤t->sighand->siglock);
- sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
+ sigorsets(&blocked, ¤t->blocked, &ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NOMASK))
- sigaddset(¤t->blocked,signr);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ sigaddset(&blocked, signr);
+ set_current_blocked(&blocked);
tracehook_signal_handler(signr, info, ka, regs, 0);
@@ -881,7 +874,7 @@
*/
if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
- sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
+ set_current_blocked(¤t->saved_sigmask);
}
}
diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c
index 04ede8f..8ce247a 100644
--- a/arch/sparc/kernel/signal_32.c
+++ b/arch/sparc/kernel/signal_32.c
@@ -62,12 +62,13 @@
static int _sigpause_common(old_sigset_t set)
{
- set &= _BLOCKABLE;
- spin_lock_irq(¤t->sighand->siglock);
+ sigset_t blocked;
+
current->saved_sigmask = current->blocked;
- siginitset(¤t->blocked, set);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+
+ set &= _BLOCKABLE;
+ siginitset(&blocked, set);
+ set_current_blocked(&blocked);
current->state = TASK_INTERRUPTIBLE;
schedule();
@@ -139,10 +140,7 @@
goto segv_and_exit;
sigdelsetmask(&set, ~_BLOCKABLE);
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ set_current_blocked(&set);
return;
segv_and_exit:
@@ -209,10 +207,7 @@
}
sigdelsetmask(&set, ~_BLOCKABLE);
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ set_current_blocked(&set);
return;
segv:
force_sig(SIGSEGV, current);
@@ -470,6 +465,7 @@
handle_signal(unsigned long signr, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset, struct pt_regs *regs)
{
+ sigset_t blocked;
int err;
if (ka->sa.sa_flags & SA_SIGINFO)
@@ -480,12 +476,10 @@
if (err)
return err;
- spin_lock_irq(¤t->sighand->siglock);
- sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
+ sigorsets(&blocked, ¤t->blocked, &ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NOMASK))
- sigaddset(¤t->blocked, signr);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ sigaddset(&blocked, signr);
+ set_current_blocked(&blocked);
tracehook_signal_handler(signr, info, ka, regs, 0);
@@ -581,7 +575,7 @@
*/
if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
clear_thread_flag(TIF_RESTORE_SIGMASK);
- sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
+ set_current_blocked(¤t->saved_sigmask);
}
}
diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c
index 47509df..a2b8159 100644
--- a/arch/sparc/kernel/signal_64.c
+++ b/arch/sparc/kernel/signal_64.c
@@ -70,10 +70,7 @@
goto do_sigsegv;
}
sigdelsetmask(&set, ~_BLOCKABLE);
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ set_current_blocked(&set);
}
if (test_thread_flag(TIF_32BIT)) {
pc &= 0xffffffff;
@@ -242,12 +239,13 @@
static long _sigpause_common(old_sigset_t set)
{
- set &= _BLOCKABLE;
- spin_lock_irq(¤t->sighand->siglock);
+ sigset_t blocked;
+
current->saved_sigmask = current->blocked;
- siginitset(¤t->blocked, set);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+
+ set &= _BLOCKABLE;
+ siginitset(&blocked, set);
+ set_current_blocked(&blocked);
current->state = TASK_INTERRUPTIBLE;
schedule();
@@ -327,10 +325,7 @@
pt_regs_clear_syscall(regs);
sigdelsetmask(&set, ~_BLOCKABLE);
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ set_current_blocked(&set);
return;
segv:
force_sig(SIGSEGV, current);
@@ -484,18 +479,17 @@
siginfo_t *info,
sigset_t *oldset, struct pt_regs *regs)
{
+ sigset_t blocked;
int err;
err = setup_rt_frame(ka, regs, signr, oldset,
(ka->sa.sa_flags & SA_SIGINFO) ? info : NULL);
if (err)
return err;
- spin_lock_irq(¤t->sighand->siglock);
- sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
+ sigorsets(&blocked, ¤t->blocked, &ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NOMASK))
- sigaddset(¤t->blocked,signr);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ sigaddset(&blocked, signr);
+ set_current_blocked(&blocked);
tracehook_signal_handler(signr, info, ka, regs, 0);
@@ -601,7 +595,7 @@
*/
if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
- sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
+ set_current_blocked(¤t->saved_sigmask);
}
}
diff --git a/arch/sparc/mm/leon_mm.c b/arch/sparc/mm/leon_mm.c
index e485a68..13c2169 100644
--- a/arch/sparc/mm/leon_mm.c
+++ b/arch/sparc/mm/leon_mm.c
@@ -162,7 +162,7 @@
printk(KERN_INFO "swprobe: padde %x\n", paddr_calc);
if (paddr)
*paddr = paddr_calc;
- return paddrbase;
+ return pte;
}
void leon_flush_icache_all(void)
diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S
index fc94607..aecc8ed 100644
--- a/arch/tile/kernel/intvec_32.S
+++ b/arch/tile/kernel/intvec_32.S
@@ -21,7 +21,7 @@
#include <asm/ptrace.h>
#include <asm/thread_info.h>
#include <asm/irqflags.h>
-#include <linux/atomic.h>
+#include <asm/atomic_32.h>
#include <asm/asm-offsets.h>
#include <hv/hypervisor.h>
#include <arch/abi.h>
diff --git a/arch/tile/lib/atomic_asm_32.S b/arch/tile/lib/atomic_asm_32.S
index 1f75a2a..3063804 100644
--- a/arch/tile/lib/atomic_asm_32.S
+++ b/arch/tile/lib/atomic_asm_32.S
@@ -70,7 +70,7 @@
*/
#include <linux/linkage.h>
-#include <linux/atomic.h>
+#include <asm/atomic_32.h>
#include <asm/page.h>
#include <asm/processor.h>
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index 18ae83d..b56c65de 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -56,7 +56,7 @@
.lock = __SEQLOCK_UNLOCKED(__vsyscall_gtod_data.lock),
};
-static enum { EMULATE, NATIVE, NONE } vsyscall_mode = EMULATE;
+static enum { EMULATE, NATIVE, NONE } vsyscall_mode = NATIVE;
static int __init vsyscall_setup(char *str)
{
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 3032644..87488b9 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -63,9 +63,8 @@
#ifdef CONFIG_X86_32
/* for fixmap */
tables += roundup(__end_of_fixed_addresses * sizeof(pte_t), PAGE_SIZE);
-
- good_end = max_pfn_mapped << PAGE_SHIFT;
#endif
+ good_end = max_pfn_mapped << PAGE_SHIFT;
base = memblock_find_in_range(start, good_end, tables, PAGE_SIZE);
if (base == MEMBLOCK_ERROR)
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 039d913..404f21a 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -43,6 +43,17 @@
DMI_MATCH(DMI_PRODUCT_NAME, "ALiveSATA2-GLAN"),
},
},
+ /* https://bugzilla.kernel.org/show_bug.cgi?id=30552 */
+ /* 2006 AMD HT/VIA system with two host bridges */
+ {
+ .callback = set_use_crs,
+ .ident = "ASUS M2V-MX SE",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "M2V-MX SE"),
+ DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
+ },
+ },
{}
};
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index 58425ad..fe73276 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -678,38 +678,40 @@
pentry = (struct sfi_device_table_entry *)sb->pentry;
for (i = 0; i < num; i++, pentry++) {
- if (pentry->irq != (u8)0xff) { /* native RTE case */
+ int irq = pentry->irq;
+
+ if (irq != (u8)0xff) { /* native RTE case */
/* these SPI2 devices are not exposed to system as PCI
* devices, but they have separate RTE entry in IOAPIC
* so we have to enable them one by one here
*/
- ioapic = mp_find_ioapic(pentry->irq);
+ ioapic = mp_find_ioapic(irq);
irq_attr.ioapic = ioapic;
- irq_attr.ioapic_pin = pentry->irq;
+ irq_attr.ioapic_pin = irq;
irq_attr.trigger = 1;
irq_attr.polarity = 1;
- io_apic_set_pci_routing(NULL, pentry->irq, &irq_attr);
+ io_apic_set_pci_routing(NULL, irq, &irq_attr);
} else
- pentry->irq = 0; /* No irq */
+ irq = 0; /* No irq */
switch (pentry->type) {
case SFI_DEV_TYPE_IPC:
/* ID as IRQ is a hack that will go away */
- pdev = platform_device_alloc(pentry->name, pentry->irq);
+ pdev = platform_device_alloc(pentry->name, irq);
if (pdev == NULL) {
pr_err("out of memory for SFI platform device '%s'.\n",
pentry->name);
continue;
}
- install_irq_resource(pdev, pentry->irq);
+ install_irq_resource(pdev, irq);
pr_debug("info[%2d]: IPC bus, name = %16.16s, "
- "irq = 0x%2x\n", i, pentry->name, pentry->irq);
+ "irq = 0x%2x\n", i, pentry->name, irq);
sfi_handle_ipc_dev(pdev);
break;
case SFI_DEV_TYPE_SPI:
memset(&spi_info, 0, sizeof(spi_info));
strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN);
- spi_info.irq = pentry->irq;
+ spi_info.irq = irq;
spi_info.bus_num = pentry->host_num;
spi_info.chip_select = pentry->addr;
spi_info.max_speed_hz = pentry->max_freq;
@@ -726,7 +728,7 @@
memset(&i2c_info, 0, sizeof(i2c_info));
bus = pentry->host_num;
strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
- i2c_info.irq = pentry->irq;
+ i2c_info.irq = irq;
i2c_info.addr = pentry->addr;
pr_debug("info[%2d]: I2C bus = %d, name = %16.16s, "
"irq = 0x%2x, addr = 0x%x\n", i, bus,
diff --git a/crypto/ghash-generic.c b/crypto/ghash-generic.c
index be44256..7835b8f 100644
--- a/crypto/ghash-generic.c
+++ b/crypto/ghash-generic.c
@@ -67,6 +67,9 @@
struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm);
u8 *dst = dctx->buffer;
+ if (!ctx->gf128)
+ return -ENOKEY;
+
if (dctx->bytes) {
int n = min(srclen, dctx->bytes);
u8 *pos = dst + (GHASH_BLOCK_SIZE - dctx->bytes);
@@ -119,6 +122,9 @@
struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm);
u8 *buf = dctx->buffer;
+ if (!ctx->gf128)
+ return -ENOKEY;
+
ghash_flush(ctx, dctx);
memcpy(dst, buf, GHASH_BLOCK_SIZE);
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index 960c725..3f4c261 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -30,7 +30,7 @@
#include <mach/at91sam9_smc.h>
#include <mach/board.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#define DRV_NAME "pata_at91"
#define DRV_VERSION "0.3"
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index d539efd..4caa3d3 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -178,6 +178,15 @@
The Intel Tunnel Creek processor has 5 GPIOs powered by the
core power rail and 9 from suspend power supply.
+config GPIO_U300
+ bool "ST-Ericsson U300 COH 901 335/571 GPIO"
+ depends on GPIOLIB && ARCH_U300
+ help
+ Say yes here to support GPIO interface on ST-Ericsson U300.
+ The names of the two IP block variants supported are
+ COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
+ ports of 8 GPIO pins each.
+
config GPIO_VX855
tristate "VIA VX855/VX875 GPIO"
depends on MFD_SUPPORT && PCI
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 9588948..19c5d27 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -14,11 +14,14 @@
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
+obj-$(CONFIG_ARCH_DAVINCI) += gpio-davinci.o
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
obj-$(CONFIG_GPIO_EXYNOS4) += gpio-exynos4.o
obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
+obj-$(CONFIG_MACH_KS8695) += gpio-ks8695.o
obj-$(CONFIG_GPIO_LANGWELL) += gpio-langwell.o
+obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o
obj-$(CONFIG_GPIO_MAX7300) += gpio-max7300.o
obj-$(CONFIG_GPIO_MAX7301) += gpio-max7301.o
@@ -37,18 +40,20 @@
obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
+obj-$(CONFIG_PLAT_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o
obj-$(CONFIG_GPIO_S5PC100) += gpio-s5pc100.o
obj-$(CONFIG_GPIO_S5PV210) += gpio-s5pv210.o
-
+obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o
obj-$(CONFIG_GPIO_SX150X) += gpio-sx150x.o
obj-$(CONFIG_GPIO_TC3589X) += gpio-tc3589x.o
obj-$(CONFIG_ARCH_TEGRA) += gpio-tegra.o
obj-$(CONFIG_GPIO_TIMBERDALE) += gpio-timberdale.o
+obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += gpio-tnetv107x.o
obj-$(CONFIG_GPIO_TPS65910) += gpio-tps65910.o
obj-$(CONFIG_GPIO_TPS65912) += gpio-tps65912.o
obj-$(CONFIG_GPIO_TWL4030) += gpio-twl4030.o
diff --git a/arch/arm/mach-davinci/gpio.c b/drivers/gpio/gpio-davinci.c
similarity index 97%
rename from arch/arm/mach-davinci/gpio.c
rename to drivers/gpio/gpio-davinci.c
index cafbe13..df0d595 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/drivers/gpio/gpio-davinci.c
@@ -9,15 +9,13 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
-#include <mach/gpio.h>
-
#include <asm/mach/irq.h>
struct davinci_gpio_regs {
@@ -232,9 +230,6 @@
static int gpio_irq_type(struct irq_data *d, unsigned trigger)
{
- struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
- u32 mask = (u32) irq_data_get_irq_handler_data(d);
-
if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
return -EINVAL;
diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c
index 72fb9c6..7aafbb4 100644
--- a/drivers/gpio/gpio-ep93xx.c
+++ b/drivers/gpio/gpio-ep93xx.c
@@ -23,6 +23,9 @@
#include <linux/basic_mmio_gpio.h>
#include <mach/hardware.h>
+#include <mach/gpio-ep93xx.h>
+
+#define irq_to_gpio(irq) ((irq) - gpio_to_irq(0))
struct ep93xx_gpio {
void __iomem *mmio_base;
@@ -307,6 +310,21 @@
return 0;
}
+/*
+ * Map GPIO A0..A7 (0..7) to irq 64..71,
+ * B0..B7 (7..15) to irq 72..79, and
+ * F0..F7 (16..24) to irq 80..87.
+ */
+static int ep93xx_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ int gpio = chip->base + offset;
+
+ if (gpio > EP93XX_GPIO_LINE_MAX_IRQ)
+ return -EINVAL;
+
+ return 64 + gpio;
+}
+
static int ep93xx_gpio_add_bank(struct bgpio_chip *bgc, struct device *dev,
void __iomem *mmio_base, struct ep93xx_gpio_bank *bank)
{
@@ -321,8 +339,10 @@
bgc->gc.label = bank->label;
bgc->gc.base = bank->base;
- if (bank->has_debounce)
+ if (bank->has_debounce) {
bgc->gc.set_debounce = ep93xx_gpio_set_debounce;
+ bgc->gc.to_irq = ep93xx_gpio_to_irq;
+ }
return gpiochip_add(&bgc->gc);
}
diff --git a/arch/arm/mach-ks8695/gpio.c b/drivers/gpio/gpio-ks8695.c
similarity index 98%
rename from arch/arm/mach-ks8695/gpio.c
rename to drivers/gpio/gpio-ks8695.c
index 31e4565..a3ac66e 100644
--- a/arch/arm/mach-ks8695/gpio.c
+++ b/drivers/gpio/gpio-ks8695.c
@@ -18,7 +18,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/init.h>
@@ -31,7 +31,7 @@
#include <asm/mach/irq.h>
#include <mach/regs-gpio.h>
-#include <mach/gpio.h>
+#include <mach/gpio-ks8695.h>
/*
* Configure a GPIO line for either GPIO function, or its internal
diff --git a/arch/arm/mach-lpc32xx/gpiolib.c b/drivers/gpio/gpio-lpc32xx.c
similarity index 98%
rename from arch/arm/mach-lpc32xx/gpiolib.c
rename to drivers/gpio/gpio-lpc32xx.c
index 69061ea..5b69480 100644
--- a/arch/arm/mach-lpc32xx/gpiolib.c
+++ b/drivers/gpio/gpio-lpc32xx.c
@@ -24,7 +24,7 @@
#include <mach/hardware.h>
#include <mach/platform.h>
-#include "common.h"
+#include <mach/gpio-lpc32xx.h>
#define LPC32XX_GPIO_P3_INP_STATE _GPREG(0x000)
#define LPC32XX_GPIO_P3_OUTP_SET _GPREG(0x004)
diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/gpio/gpio-nomadik.c
index 2c212c7..740caed 100644
--- a/drivers/gpio/gpio-nomadik.c
+++ b/drivers/gpio/gpio-nomadik.c
@@ -27,8 +27,9 @@
#include <asm/mach/irq.h>
#include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
/*
* The GPIO module in the Nomadik family of Systems-on-Chip is an
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 0599854..0e49d87 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -25,7 +25,7 @@
#include <mach/hardware.h>
#include <asm/irq.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <asm/mach/irq.h>
struct gpio_bank {
@@ -34,8 +34,8 @@
u16 irq;
u16 virtual_irq_start;
int method;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
u32 suspend_wakeup;
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
u32 saved_wakeup;
#endif
u32 non_wakeup_gpios;
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index c43b8ff..0550dcb 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -577,6 +577,7 @@
void
pca953x_get_alt_pdata(struct i2c_client *client, int *gpio_base, int *invert)
{
+ *gpio_base = -1;
}
#endif
diff --git a/arch/arm/plat-pxa/gpio.c b/drivers/gpio/gpio-pxa.c
similarity index 98%
rename from arch/arm/plat-pxa/gpio.c
rename to drivers/gpio/gpio-pxa.c
index a11dc36..9052925 100644
--- a/arch/arm/plat-pxa/gpio.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -11,14 +11,14 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/syscore_ops.h>
#include <linux/slab.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
int pxa_last_gpio;
diff --git a/arch/arm/mach-sa1100/gpio.c b/drivers/gpio/gpio-sa1100.c
similarity index 96%
rename from arch/arm/mach-sa1100/gpio.c
rename to drivers/gpio/gpio-sa1100.c
index 0d3829a..b6c1f6d 100644
--- a/arch/arm/mach-sa1100/gpio.c
+++ b/drivers/gpio/gpio-sa1100.c
@@ -7,13 +7,11 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <asm/gpio.h>
#include <mach/hardware.h>
-#include "generic.h"
static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
{
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index 747eb40..6b65207 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -27,6 +27,7 @@
#include <asm/mach/irq.h>
+#include <mach/gpio-tegra.h>
#include <mach/iomap.h>
#include <mach/suspend.h>
@@ -134,7 +135,10 @@
return 0;
}
-
+static int tegra_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ return TEGRA_GPIO_TO_IRQ(offset);
+}
static struct gpio_chip tegra_gpio_chip = {
.label = "tegra-gpio",
@@ -142,6 +146,7 @@
.get = tegra_gpio_get,
.direction_output = tegra_gpio_direction_output,
.set = tegra_gpio_set,
+ .to_irq = tegra_gpio_to_irq,
.base = 0,
.ngpio = TEGRA_NR_GPIOS,
};
@@ -331,6 +336,7 @@
static int __init tegra_gpio_init(void)
{
struct tegra_gpio_bank *bank;
+ int gpio;
int i;
int j;
@@ -352,14 +358,17 @@
gpiochip_add(&tegra_gpio_chip);
- for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + TEGRA_NR_GPIOS); i++) {
- bank = &tegra_gpio_banks[GPIO_BANK(irq_to_gpio(i))];
+ for (gpio = 0; gpio < TEGRA_NR_GPIOS; gpio++) {
+ int irq = TEGRA_GPIO_TO_IRQ(gpio);
+ /* No validity check; all Tegra GPIOs are valid IRQs */
- irq_set_lockdep_class(i, &gpio_lock_class);
- irq_set_chip_data(i, bank);
- irq_set_chip_and_handler(i, &tegra_gpio_irq_chip,
+ bank = &tegra_gpio_banks[GPIO_BANK(gpio)];
+
+ irq_set_lockdep_class(irq, &gpio_lock_class);
+ irq_set_chip_data(irq, bank);
+ irq_set_chip_and_handler(irq, &tegra_gpio_irq_chip,
handle_simple_irq);
- set_irq_flags(i, IRQF_VALID);
+ set_irq_flags(irq, IRQF_VALID);
}
for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
diff --git a/arch/arm/mach-davinci/gpio-tnetv107x.c b/drivers/gpio/gpio-tnetv107x.c
similarity index 100%
rename from arch/arm/mach-davinci/gpio-tnetv107x.c
rename to drivers/gpio/gpio-tnetv107x.c
diff --git a/drivers/gpio/gpio-u300.c b/drivers/gpio/gpio-u300.c
index 53e8255..4035778 100644
--- a/drivers/gpio/gpio-u300.c
+++ b/drivers/gpio/gpio-u300.c
@@ -1,18 +1,17 @@
/*
* U300 GPIO module.
*
- * Copyright (C) 2007-2009 ST-Ericsson AB
+ * Copyright (C) 2007-2011 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* This can driver either of the two basic GPIO cores
* available in the U300 platforms:
* COH 901 335 - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0)
* COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0)
- * Notice that you also have inline macros in <asm-arch/gpio.h>
- * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Linus Walleij <linus.walleij@linaro.org>
* Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- *
*/
#include <linux/module.h>
+#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/errno.h>
@@ -21,677 +20,898 @@
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <mach/gpio-u300.h>
-/* Reference to GPIO block clock */
-static struct clk *clk;
+/*
+ * Bias modes for U300 GPIOs
+ *
+ * GPIO_U300_CONFIG_BIAS_UNKNOWN: this bias mode is not known to us
+ * GPIO_U300_CONFIG_BIAS_FLOAT: no specific bias, the GPIO will float or state
+ * is not controlled by software
+ * GPIO_U300_CONFIG_BIAS_PULL_UP: the GPIO will be pulled up (usually with high
+ * impedance to VDD)
+ */
+#define GPIO_U300_CONFIG_BIAS_UNKNOWN 0x1000
+#define GPIO_U300_CONFIG_BIAS_FLOAT 0x1001
+#define GPIO_U300_CONFIG_BIAS_PULL_UP 0x1002
-/* Memory resource */
-static struct resource *memres;
-static void __iomem *virtbase;
-static struct device *gpiodev;
+/*
+ * Drive modes for U300 GPIOs (output)
+ *
+ * GPIO_U300_CONFIG_DRIVE_PUSH_PULL: the GPIO will be driven actively high and
+ * low, this is the most typical case and is typically achieved with two
+ * active transistors on the output
+ * GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN: the GPIO will be driven with open drain
+ * (open collector) which means it is usually wired with other output
+ * ports which are then pulled up with an external resistor
+ * GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE: the GPIO will be driven with open drain
+ * (open emitter) which is the same as open drain mutatis mutandis but
+ * pulled to ground
+ */
+#define GPIO_U300_CONFIG_DRIVE_PUSH_PULL 0x2000
+#define GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN 0x2001
+#define GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE 0x2002
+
+/*
+ * Register definitions for COH 901 335 variant
+ */
+#define U300_335_PORT_STRIDE (0x1C)
+/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
+#define U300_335_PXPDIR (0x00)
+#define U300_335_PXPDOR (0x00)
+/* Port X Pin Config Register 32bit (R/W) */
+#define U300_335_PXPCR (0x04)
+/* This register layout is the same in both blocks */
+#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
+#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
+#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
+/* Port X Interrupt Event Register 32bit (R/W) */
+#define U300_335_PXIEV (0x08)
+/* Port X Interrupt Enable Register 32bit (R/W) */
+#define U300_335_PXIEN (0x0C)
+/* Port X Interrupt Force Register 32bit (R/W) */
+#define U300_335_PXIFR (0x10)
+/* Port X Interrupt Config Register 32bit (R/W) */
+#define U300_335_PXICR (0x14)
+/* This register layout is the same in both blocks */
+#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
+/* Port X Pull-up Enable Register 32bit (R/W) */
+#define U300_335_PXPER (0x18)
+/* This register layout is the same in both blocks */
+#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
+#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
+/* Control Register 32bit (R/W) */
+#define U300_335_CR (0x54)
+#define U300_335_CR_BLOCK_CLOCK_ENABLE (0x00000001UL)
+
+/*
+ * Register definitions for COH 901 571 / 3 variant
+ */
+#define U300_571_PORT_STRIDE (0x30)
+/*
+ * Control Register 32bit (R/W)
+ * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
+ * gives the number of GPIO pins.
+ * bit 8-2 (mask 0x000001FC) contains the core version ID.
+ */
+#define U300_571_CR (0x00)
+#define U300_571_CR_SYNC_SEL_ENABLE (0x00000002UL)
+#define U300_571_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL)
+/*
+ * These registers have the same layout and function as the corresponding
+ * COH 901 335 registers, just at different offset.
+ */
+#define U300_571_PXPDIR (0x04)
+#define U300_571_PXPDOR (0x08)
+#define U300_571_PXPCR (0x0C)
+#define U300_571_PXPER (0x10)
+#define U300_571_PXIEV (0x14)
+#define U300_571_PXIEN (0x18)
+#define U300_571_PXIFR (0x1C)
+#define U300_571_PXICR (0x20)
+
+/* 8 bits per port, no version has more than 7 ports */
+#define U300_GPIO_PINS_PER_PORT 8
+#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * 7)
+
+struct u300_gpio {
+ struct gpio_chip chip;
+ struct list_head port_list;
+ struct clk *clk;
+ struct resource *memres;
+ void __iomem *base;
+ struct device *dev;
+ int irq_base;
+ u32 stride;
+ /* Register offsets */
+ u32 pcr;
+ u32 dor;
+ u32 dir;
+ u32 per;
+ u32 icr;
+ u32 ien;
+ u32 iev;
+};
struct u300_gpio_port {
- const char *name;
+ struct list_head node;
+ struct u300_gpio *gpio;
+ char name[8];
int irq;
int number;
+ u8 toggle_edge_mode;
};
+/*
+ * Macro to expand to read a specific register found in the "gpio"
+ * struct. It requires the struct u300_gpio *gpio variable to exist in
+ * its context. It calculates the port offset from the given pin
+ * offset, muliplies by the port stride and adds the register offset
+ * so it provides a pointer to the desired register.
+ */
+#define U300_PIN_REG(pin, reg) \
+ (gpio->base + (pin >> 3) * gpio->stride + gpio->reg)
-static struct u300_gpio_port gpio_ports[] = {
- {
- .name = "gpio0",
- .number = 0,
- },
- {
- .name = "gpio1",
- .number = 1,
- },
- {
- .name = "gpio2",
- .number = 2,
- },
-#ifdef U300_COH901571_3
- {
- .name = "gpio3",
- .number = 3,
- },
- {
- .name = "gpio4",
- .number = 4,
- },
-#ifdef CONFIG_MACH_U300_BS335
- {
- .name = "gpio5",
- .number = 5,
- },
- {
- .name = "gpio6",
- .number = 6,
- },
-#endif
-#endif
+/*
+ * Provides a bitmask for a specific gpio pin inside an 8-bit GPIO
+ * register.
+ */
+#define U300_PIN_BIT(pin) \
+ (1 << (pin & 0x07))
+struct u300_gpio_confdata {
+ u16 bias_mode;
+ bool output;
+ int outval;
};
+/* BS335 has seven ports of 8 bits each = GPIO pins 0..55 */
+#define BS335_GPIO_NUM_PORTS 7
+/* BS365 has five ports of 8 bits each = GPIO pins 0..39 */
+#define BS365_GPIO_NUM_PORTS 5
-#ifdef U300_COH901571_3
+#define U300_FLOATING_INPUT { \
+ .bias_mode = GPIO_U300_CONFIG_BIAS_FLOAT, \
+ .output = false, \
+}
-/* Default input value */
-#define DEFAULT_OUTPUT_LOW 0
-#define DEFAULT_OUTPUT_HIGH 1
+#define U300_PULL_UP_INPUT { \
+ .bias_mode = GPIO_U300_CONFIG_BIAS_PULL_UP, \
+ .output = false, \
+}
-/* GPIO Pull-Up status */
-#define DISABLE_PULL_UP 0
-#define ENABLE_PULL_UP 1
+#define U300_OUTPUT_LOW { \
+ .output = true, \
+ .outval = 0, \
+}
-#define GPIO_NOT_USED 0
-#define GPIO_IN 1
-#define GPIO_OUT 2
+#define U300_OUTPUT_HIGH { \
+ .output = true, \
+ .outval = 1, \
+}
-struct u300_gpio_configuration_data {
- unsigned char pin_usage;
- unsigned char default_output_value;
- unsigned char pull_up;
-};
/* Initial configuration */
-const struct u300_gpio_configuration_data
-u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
-#ifdef CONFIG_MACH_U300_BS335
+static const struct __initdata u300_gpio_confdata
+bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
/* Port 0, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_HIGH,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
},
/* Port 1, pins 0-7 */
{
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_PULL_UP_INPUT,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_HIGH,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
},
/* Port 2, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_LOW,
+ U300_PULL_UP_INPUT,
+ U300_OUTPUT_LOW,
+ U300_PULL_UP_INPUT,
},
/* Port 3, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_PULL_UP_INPUT,
+ U300_OUTPUT_LOW,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
},
/* Port 4, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
},
/* Port 5, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
},
/* Port 6, pind 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
}
-#endif
+};
-#ifdef CONFIG_MACH_U300_BS365
+static const struct __initdata u300_gpio_confdata
+bs365_gpio_config[BS365_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
/* Port 0, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_LOW,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_PULL_UP_INPUT,
+ U300_FLOATING_INPUT,
},
/* Port 1, pins 0-7 */
{
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_OUTPUT_LOW,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_LOW,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_HIGH,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
},
/* Port 2, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
},
/* Port 3, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
},
/* Port 4, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
/* These 4 pins doesn't exist on DB3210 */
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
}
-#endif
-};
-#endif
-
-
-/* No users == we can power down GPIO */
-static int gpio_users;
-
-struct gpio_struct {
- int (*callback)(void *);
- void *data;
- int users;
};
-static struct gpio_struct gpio_pin[U300_GPIO_MAX];
-
-/*
- * Let drivers register callback in order to get notified when there is
- * an interrupt on the gpio pin
+/**
+ * to_u300_gpio() - get the pointer to u300_gpio
+ * @chip: the gpio chip member of the structure u300_gpio
*/
-int gpio_register_callback(unsigned gpio, int (*func)(void *arg), void *data)
+static inline struct u300_gpio *to_u300_gpio(struct gpio_chip *chip)
{
- if (gpio_pin[gpio].callback)
- dev_warn(gpiodev, "%s: WARNING: callback already "
- "registered for gpio pin#%d\n", __func__, gpio);
- gpio_pin[gpio].callback = func;
- gpio_pin[gpio].data = data;
-
- return 0;
+ return container_of(chip, struct u300_gpio, chip);
}
-EXPORT_SYMBOL(gpio_register_callback);
-int gpio_unregister_callback(unsigned gpio)
+static int u300_gpio_get(struct gpio_chip *chip, unsigned offset)
{
- if (!gpio_pin[gpio].callback)
- dev_warn(gpiodev, "%s: WARNING: callback already "
- "unregistered for gpio pin#%d\n", __func__, gpio);
- gpio_pin[gpio].callback = NULL;
- gpio_pin[gpio].data = NULL;
+ struct u300_gpio *gpio = to_u300_gpio(chip);
- return 0;
+ return readl(U300_PIN_REG(offset, dir)) & U300_PIN_BIT(offset);
}
-EXPORT_SYMBOL(gpio_unregister_callback);
-/* Non-zero means valid */
-int gpio_is_valid(int number)
+static void u300_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
- if (number >= 0 &&
- number < (U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT))
- return 1;
- return 0;
-}
-EXPORT_SYMBOL(gpio_is_valid);
+ struct u300_gpio *gpio = to_u300_gpio(chip);
+ unsigned long flags;
+ u32 val;
-int gpio_request(unsigned gpio, const char *label)
-{
- if (gpio_pin[gpio].users)
- return -EINVAL;
+ local_irq_save(flags);
+
+ val = readl(U300_PIN_REG(offset, dor));
+ if (value)
+ writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, dor));
else
- gpio_pin[gpio].users++;
+ writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, dor));
- gpio_users++;
-
- return 0;
-}
-EXPORT_SYMBOL(gpio_request);
-
-void gpio_free(unsigned gpio)
-{
- gpio_users--;
- gpio_pin[gpio].users--;
- if (unlikely(gpio_pin[gpio].users < 0)) {
- dev_warn(gpiodev, "warning: gpio#%d release mismatch\n",
- gpio);
- gpio_pin[gpio].users = 0;
- }
-
- return;
-}
-EXPORT_SYMBOL(gpio_free);
-
-/* This returns zero or nonzero */
-int gpio_get_value(unsigned gpio)
-{
- return readl(virtbase + U300_GPIO_PXPDIR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) & (1 << (gpio & 0x07));
-}
-EXPORT_SYMBOL(gpio_get_value);
-
-/*
- * We hope that the compiler will optimize away the unused branch
- * in case "value" is a constant
- */
-void gpio_set_value(unsigned gpio, int value)
-{
- u32 val;
- unsigned long flags;
-
- local_irq_save(flags);
- if (value) {
- /* set */
- val = readl(virtbase + U300_GPIO_PXPDOR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
- & (1 << (gpio & 0x07));
- writel(val | (1 << (gpio & 0x07)), virtbase +
- U300_GPIO_PXPDOR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
- } else {
- /* clear */
- val = readl(virtbase + U300_GPIO_PXPDOR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
- & (1 << (gpio & 0x07));
- writel(val & ~(1 << (gpio & 0x07)), virtbase +
- U300_GPIO_PXPDOR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
- }
local_irq_restore(flags);
}
-EXPORT_SYMBOL(gpio_set_value);
-int gpio_direction_input(unsigned gpio)
+static int u300_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
+ struct u300_gpio *gpio = to_u300_gpio(chip);
unsigned long flags;
u32 val;
- if (gpio > U300_GPIO_MAX)
- return -EINVAL;
-
local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- /* Mask out this pin*/
- val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
- /* This is not needed since it sets the bits to zero.*/
- /* val |= (U300_GPIO_PXPCR_PIN_MODE_INPUT << (gpio*2)); */
- writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
+ val = readl(U300_PIN_REG(offset, pcr));
+ /* Mask out this pin, note 2 bits per setting */
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((offset & 0x07) << 1));
+ writel(val, U300_PIN_REG(offset, pcr));
local_irq_restore(flags);
return 0;
}
-EXPORT_SYMBOL(gpio_direction_input);
-int gpio_direction_output(unsigned gpio, int value)
+static int u300_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
{
+ struct u300_gpio *gpio = to_u300_gpio(chip);
unsigned long flags;
+ u32 oldmode;
u32 val;
- if (gpio > U300_GPIO_MAX)
- return -EINVAL;
-
local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- /* Mask out this pin */
- val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
+ val = readl(U300_PIN_REG(offset, pcr));
/*
- * FIXME: configure for push/pull, open drain or open source per pin
- * in setup. The current driver will only support push/pull.
+ * Drive mode must be set by the special mode set function, set
+ * push/pull mode by default if no mode has been selected.
*/
- val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
- << ((gpio & 0x07) << 1));
- writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- gpio_set_value(gpio, value);
+ oldmode = val & (U300_GPIO_PXPCR_PIN_MODE_MASK <<
+ ((offset & 0x07) << 1));
+ /* mode = 0 means input, else some mode is already set */
+ if (oldmode == 0) {
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK <<
+ ((offset & 0x07) << 1));
+ val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
+ << ((offset & 0x07) << 1));
+ writel(val, U300_PIN_REG(offset, pcr));
+ }
+ u300_gpio_set(chip, offset, value);
local_irq_restore(flags);
return 0;
}
-EXPORT_SYMBOL(gpio_direction_output);
-/*
- * Enable an IRQ, edge is rising edge (!= 0) or falling edge (==0).
- */
-void enable_irq_on_gpio_pin(unsigned gpio, int edge)
+static int u300_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
- u32 val;
- unsigned long flags;
- local_irq_save(flags);
+ struct u300_gpio *gpio = to_u300_gpio(chip);
+ int retirq = gpio->irq_base + offset;
- val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- val |= (1 << (gpio & 0x07));
- writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- val = readl(virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- if (edge)
- val |= (1 << (gpio & 0x07));
- else
- val &= ~(1 << (gpio & 0x07));
- writel(val, virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
+ dev_dbg(gpio->dev, "request IRQ for GPIO %d, return %d\n", offset,
+ retirq);
+ return retirq;
}
-EXPORT_SYMBOL(enable_irq_on_gpio_pin);
-void disable_irq_on_gpio_pin(unsigned gpio)
+static int u300_gpio_config(struct gpio_chip *chip, unsigned offset,
+ u16 param, unsigned long *data)
{
- u32 val;
+ struct u300_gpio *gpio = to_u300_gpio(chip);
unsigned long flags;
+ u32 val;
local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- val &= ~(1 << (gpio & 0x07));
- writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL(disable_irq_on_gpio_pin);
-
-/* Enable (value == 0) or disable (value == 1) internal pullup */
-void gpio_pullup(unsigned gpio, int value)
-{
- u32 val;
- unsigned long flags;
-
- local_irq_save(flags);
- if (value) {
- val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- writel(val | (1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
- } else {
- val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- writel(val & ~(1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
- }
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_pullup);
-
-static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
-{
- struct u300_gpio_port *port = dev_id;
- u32 val;
- int pin;
-
- /* Read event register */
- val = readl(virtbase + U300_GPIO_PXIEV + port->number *
- U300_GPIO_PORTX_SPACING);
- /* Mask with enable register */
- val &= readl(virtbase + U300_GPIO_PXIEV + port->number *
- U300_GPIO_PORTX_SPACING);
- /* Mask relevant bits */
- val &= U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK;
- /* ACK IRQ (clear event) */
- writel(val, virtbase + U300_GPIO_PXIEV + port->number *
- U300_GPIO_PORTX_SPACING);
- /* Print message */
- while (val != 0) {
- unsigned gpio;
-
- pin = __ffs(val);
- /* mask off this pin */
- val &= ~(1 << pin);
- gpio = (port->number << 3) + pin;
-
- if (gpio_pin[gpio].callback)
- (void)gpio_pin[gpio].callback(gpio_pin[gpio].data);
- else
- dev_dbg(gpiodev, "stray GPIO IRQ on line %d\n",
- gpio);
- }
- return IRQ_HANDLED;
-}
-
-static void gpio_set_initial_values(void)
-{
-#ifdef U300_COH901571_3
- int i, j;
- unsigned long flags;
- u32 val;
-
- /* Write default values to all pins */
- for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
- val = 0;
- for (j = 0; j < 8; j++)
- val |= (u32) (u300_gpio_config[i][j].default_output_value != DEFAULT_OUTPUT_LOW) << j;
- local_irq_save(flags);
- writel(val, virtbase + U300_GPIO_PXPDOR + i * U300_GPIO_PORTX_SPACING);
+ switch (param) {
+ case GPIO_U300_CONFIG_BIAS_UNKNOWN:
+ case GPIO_U300_CONFIG_BIAS_FLOAT:
+ val = readl(U300_PIN_REG(offset, per));
+ writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, per));
+ break;
+ case GPIO_U300_CONFIG_BIAS_PULL_UP:
+ val = readl(U300_PIN_REG(offset, per));
+ writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, per));
+ break;
+ case GPIO_U300_CONFIG_DRIVE_PUSH_PULL:
+ val = readl(U300_PIN_REG(offset, pcr));
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK
+ << ((offset & 0x07) << 1));
+ val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
+ << ((offset & 0x07) << 1));
+ writel(val, U300_PIN_REG(offset, pcr));
+ break;
+ case GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN:
+ val = readl(U300_PIN_REG(offset, pcr));
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK
+ << ((offset & 0x07) << 1));
+ val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN
+ << ((offset & 0x07) << 1));
+ writel(val, U300_PIN_REG(offset, pcr));
+ break;
+ case GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE:
+ val = readl(U300_PIN_REG(offset, pcr));
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK
+ << ((offset & 0x07) << 1));
+ val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE
+ << ((offset & 0x07) << 1));
+ writel(val, U300_PIN_REG(offset, pcr));
+ break;
+ default:
local_irq_restore(flags);
+ dev_err(gpio->dev, "illegal configuration requested\n");
+ return -EINVAL;
+ }
+ local_irq_restore(flags);
+ return 0;
+}
+
+static struct gpio_chip u300_gpio_chip = {
+ .label = "u300-gpio-chip",
+ .owner = THIS_MODULE,
+ .get = u300_gpio_get,
+ .set = u300_gpio_set,
+ .direction_input = u300_gpio_direction_input,
+ .direction_output = u300_gpio_direction_output,
+ .to_irq = u300_gpio_to_irq,
+};
+
+static void u300_toggle_trigger(struct u300_gpio *gpio, unsigned offset)
+{
+ u32 val;
+
+ val = readl(U300_PIN_REG(offset, icr));
+ /* Set mode depending on state */
+ if (u300_gpio_get(&gpio->chip, offset)) {
+ /* High now, let's trigger on falling edge next then */
+ writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+ dev_dbg(gpio->dev, "next IRQ on falling edge on pin %d\n",
+ offset);
+ } else {
+ /* Low now, let's trigger on rising edge next then */
+ writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+ dev_dbg(gpio->dev, "next IRQ on rising edge on pin %d\n",
+ offset);
+ }
+}
+
+static int u300_gpio_irq_type(struct irq_data *d, unsigned trigger)
+{
+ struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+ struct u300_gpio *gpio = port->gpio;
+ int offset = d->irq - gpio->irq_base;
+ u32 val;
+
+ if ((trigger & IRQF_TRIGGER_RISING) &&
+ (trigger & IRQF_TRIGGER_FALLING)) {
+ /*
+ * The GPIO block can only trigger on falling OR rising edges,
+ * not both. So we need to toggle the mode whenever the pin
+ * goes from one state to the other with a special state flag
+ */
+ dev_dbg(gpio->dev,
+ "trigger on both rising and falling edge on pin %d\n",
+ offset);
+ port->toggle_edge_mode |= U300_PIN_BIT(offset);
+ u300_toggle_trigger(gpio, offset);
+ } else if (trigger & IRQF_TRIGGER_RISING) {
+ dev_dbg(gpio->dev, "trigger on rising edge on pin %d\n",
+ offset);
+ val = readl(U300_PIN_REG(offset, icr));
+ writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+ port->toggle_edge_mode &= ~U300_PIN_BIT(offset);
+ } else if (trigger & IRQF_TRIGGER_FALLING) {
+ dev_dbg(gpio->dev, "trigger on falling edge on pin %d\n",
+ offset);
+ val = readl(U300_PIN_REG(offset, icr));
+ writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+ port->toggle_edge_mode &= ~U300_PIN_BIT(offset);
}
- /*
- * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED'
- * to output and 'GPIO_IN' to input for each port. And initialize
- * default value on outputs.
- */
- for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
- for (j = 0; j < U300_GPIO_PINS_PER_PORT; j++) {
- local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXPCR +
- i * U300_GPIO_PORTX_SPACING);
- /* Mask out this pin */
- val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << (j << 1));
+ return 0;
+}
- if (u300_gpio_config[i][j].pin_usage != GPIO_IN)
- val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL << (j << 1));
- writel(val, virtbase + U300_GPIO_PXPCR +
- i * U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
+static void u300_gpio_irq_enable(struct irq_data *d)
+{
+ struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+ struct u300_gpio *gpio = port->gpio;
+ int offset = d->irq - gpio->irq_base;
+ u32 val;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ val = readl(U300_PIN_REG(offset, ien));
+ writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, ien));
+ local_irq_restore(flags);
+}
+
+static void u300_gpio_irq_disable(struct irq_data *d)
+{
+ struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+ struct u300_gpio *gpio = port->gpio;
+ int offset = d->irq - gpio->irq_base;
+ u32 val;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ val = readl(U300_PIN_REG(offset, ien));
+ writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, ien));
+ local_irq_restore(flags);
+}
+
+static struct irq_chip u300_gpio_irqchip = {
+ .name = "u300-gpio-irqchip",
+ .irq_enable = u300_gpio_irq_enable,
+ .irq_disable = u300_gpio_irq_disable,
+ .irq_set_type = u300_gpio_irq_type,
+
+};
+
+static void u300_gpio_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+ struct u300_gpio_port *port = irq_get_handler_data(irq);
+ struct u300_gpio *gpio = port->gpio;
+ int pinoffset = port->number << 3; /* get the right stride */
+ unsigned long val;
+
+ desc->irq_data.chip->irq_ack(&desc->irq_data);
+ /* Read event register */
+ val = readl(U300_PIN_REG(pinoffset, iev));
+ /* Mask relevant bits */
+ val &= 0xFFU; /* 8 bits per port */
+ /* ACK IRQ (clear event) */
+ writel(val, U300_PIN_REG(pinoffset, iev));
+
+ /* Call IRQ handler */
+ if (val != 0) {
+ int irqoffset;
+
+ for_each_set_bit(irqoffset, &val, U300_GPIO_PINS_PER_PORT) {
+ int pin_irq = gpio->irq_base + (port->number << 3)
+ + irqoffset;
+ int offset = pinoffset + irqoffset;
+
+ dev_dbg(gpio->dev, "GPIO IRQ %d on pin %d\n",
+ pin_irq, offset);
+ generic_handle_irq(pin_irq);
+ /*
+ * Triggering IRQ on both rising and falling edge
+ * needs mockery
+ */
+ if (port->toggle_edge_mode & U300_PIN_BIT(offset))
+ u300_toggle_trigger(gpio, offset);
}
}
- /* Enable or disable the internal pull-ups in the GPIO ASIC block */
- for (i = 0; i < U300_GPIO_MAX; i++) {
- val = 0;
- for (j = 0; j < 8; j++)
- val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP) << j);
- local_irq_save(flags);
- writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
- }
-#endif
+ desc->irq_data.chip->irq_unmask(&desc->irq_data);
}
-static int __init gpio_probe(struct platform_device *pdev)
+static void __init u300_gpio_init_pin(struct u300_gpio *gpio,
+ int offset,
+ const struct u300_gpio_confdata *conf)
{
- u32 val;
- int err = 0;
- int i;
- int num_irqs;
+ /* Set mode: input or output */
+ if (conf->output) {
+ u300_gpio_direction_output(&gpio->chip, offset, conf->outval);
- gpiodev = &pdev->dev;
- memset(gpio_pin, 0, sizeof(gpio_pin));
+ /* Deactivate bias mode for output */
+ u300_gpio_config(&gpio->chip, offset,
+ GPIO_U300_CONFIG_BIAS_FLOAT,
+ NULL);
+
+ /* Set drive mode for output */
+ u300_gpio_config(&gpio->chip, offset,
+ GPIO_U300_CONFIG_DRIVE_PUSH_PULL, NULL);
+
+ dev_dbg(gpio->dev, "set up pin %d as output, value: %d\n",
+ offset, conf->outval);
+ } else {
+ u300_gpio_direction_input(&gpio->chip, offset);
+
+ /* Always set output low on input pins */
+ u300_gpio_set(&gpio->chip, offset, 0);
+
+ /* Set bias mode for input */
+ u300_gpio_config(&gpio->chip, offset, conf->bias_mode, NULL);
+
+ dev_dbg(gpio->dev, "set up pin %d as input, bias: %04x\n",
+ offset, conf->bias_mode);
+ }
+}
+
+static void __init u300_gpio_init_coh901571(struct u300_gpio *gpio,
+ struct u300_gpio_platform *plat)
+{
+ int i, j;
+
+ /* Write default config and values to all pins */
+ for (i = 0; i < plat->ports; i++) {
+ for (j = 0; j < 8; j++) {
+ const struct u300_gpio_confdata *conf;
+ int offset = (i*8) + j;
+
+ if (plat->variant == U300_GPIO_COH901571_3_BS335)
+ conf = &bs335_gpio_config[i][j];
+ else if (plat->variant == U300_GPIO_COH901571_3_BS365)
+ conf = &bs365_gpio_config[i][j];
+ else
+ break;
+
+ u300_gpio_init_pin(gpio, offset, conf);
+ }
+ }
+}
+
+static inline void u300_gpio_free_ports(struct u300_gpio *gpio)
+{
+ struct u300_gpio_port *port;
+ struct list_head *p, *n;
+
+ list_for_each_safe(p, n, &gpio->port_list) {
+ port = list_entry(p, struct u300_gpio_port, node);
+ list_del(&port->node);
+ free_irq(port->irq, port);
+ kfree(port);
+ }
+}
+
+static int __init u300_gpio_probe(struct platform_device *pdev)
+{
+ struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev);
+ struct u300_gpio *gpio;
+ int err = 0;
+ int portno;
+ u32 val;
+ u32 ifr;
+ int i;
+
+ gpio = kzalloc(sizeof(struct u300_gpio), GFP_KERNEL);
+ if (gpio == NULL) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ gpio->chip = u300_gpio_chip;
+ gpio->chip.ngpio = plat->ports * U300_GPIO_PINS_PER_PORT;
+ gpio->irq_base = plat->gpio_irq_base;
+ gpio->chip.dev = &pdev->dev;
+ gpio->chip.base = plat->gpio_base;
+ gpio->dev = &pdev->dev;
/* Get GPIO clock */
- clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(clk)) {
- err = PTR_ERR(clk);
- dev_err(gpiodev, "could not get GPIO clock\n");
+ gpio->clk = clk_get(gpio->dev, NULL);
+ if (IS_ERR(gpio->clk)) {
+ err = PTR_ERR(gpio->clk);
+ dev_err(gpio->dev, "could not get GPIO clock\n");
goto err_no_clk;
}
- err = clk_enable(clk);
+ err = clk_enable(gpio->clk);
if (err) {
- dev_err(gpiodev, "could not enable GPIO clock\n");
+ dev_err(gpio->dev, "could not enable GPIO clock\n");
goto err_no_clk_enable;
}
- memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!memres)
+ gpio->memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!gpio->memres) {
+ dev_err(gpio->dev, "could not get GPIO memory resource\n");
+ err = -ENODEV;
goto err_no_resource;
+ }
- if (!request_mem_region(memres->start, resource_size(memres),
+ if (!request_mem_region(gpio->memres->start,
+ resource_size(gpio->memres),
"GPIO Controller")) {
err = -ENODEV;
goto err_no_ioregion;
}
- virtbase = ioremap(memres->start, resource_size(memres));
- if (!virtbase) {
+ gpio->base = ioremap(gpio->memres->start, resource_size(gpio->memres));
+ if (!gpio->base) {
err = -ENOMEM;
goto err_no_ioremap;
}
- dev_info(gpiodev, "remapped 0x%08x to %p\n",
- memres->start, virtbase);
-#ifdef U300_COH901335
- dev_info(gpiodev, "initializing GPIO Controller COH 901 335\n");
- /* Turn on the GPIO block */
- writel(U300_GPIO_CR_BLOCK_CLOCK_ENABLE, virtbase + U300_GPIO_CR);
-#endif
+ if (plat->variant == U300_GPIO_COH901335) {
+ dev_info(gpio->dev,
+ "initializing GPIO Controller COH 901 335\n");
+ gpio->stride = U300_335_PORT_STRIDE;
+ gpio->pcr = U300_335_PXPCR;
+ gpio->dor = U300_335_PXPDOR;
+ gpio->dir = U300_335_PXPDIR;
+ gpio->per = U300_335_PXPER;
+ gpio->icr = U300_335_PXICR;
+ gpio->ien = U300_335_PXIEN;
+ gpio->iev = U300_335_PXIEV;
+ ifr = U300_335_PXIFR;
-#ifdef U300_COH901571_3
- dev_info(gpiodev, "initializing GPIO Controller COH 901 571/3\n");
- val = readl(virtbase + U300_GPIO_CR);
- dev_info(gpiodev, "COH901571/3 block version: %d, " \
- "number of cores: %d\n",
- ((val & 0x0000FE00) >> 9),
- ((val & 0x000001FC) >> 2));
- writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR);
-#endif
+ /* Turn on the GPIO block */
+ writel(U300_335_CR_BLOCK_CLOCK_ENABLE,
+ gpio->base + U300_335_CR);
+ } else if (plat->variant == U300_GPIO_COH901571_3_BS335 ||
+ plat->variant == U300_GPIO_COH901571_3_BS365) {
+ dev_info(gpio->dev,
+ "initializing GPIO Controller COH 901 571/3\n");
+ gpio->stride = U300_571_PORT_STRIDE;
+ gpio->pcr = U300_571_PXPCR;
+ gpio->dor = U300_571_PXPDOR;
+ gpio->dir = U300_571_PXPDIR;
+ gpio->per = U300_571_PXPER;
+ gpio->icr = U300_571_PXICR;
+ gpio->ien = U300_571_PXIEN;
+ gpio->iev = U300_571_PXIEV;
+ ifr = U300_571_PXIFR;
- gpio_set_initial_values();
-
- for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) {
-
- gpio_ports[num_irqs].irq =
- platform_get_irq_byname(pdev,
- gpio_ports[num_irqs].name);
-
- err = request_irq(gpio_ports[num_irqs].irq,
- gpio_irq_handler, IRQF_DISABLED,
- gpio_ports[num_irqs].name,
- &gpio_ports[num_irqs]);
- if (err) {
- dev_err(gpiodev, "cannot allocate IRQ for %s!\n",
- gpio_ports[num_irqs].name);
- goto err_no_irq;
- }
- /* Turns off PortX_irq_force */
- writel(0x0, virtbase + U300_GPIO_PXIFR +
- num_irqs * U300_GPIO_PORTX_SPACING);
+ val = readl(gpio->base + U300_571_CR);
+ dev_info(gpio->dev, "COH901571/3 block version: %d, " \
+ "number of cores: %d totalling %d pins\n",
+ ((val & 0x000001FC) >> 2),
+ ((val & 0x0000FE00) >> 9),
+ ((val & 0x0000FE00) >> 9) * 8);
+ writel(U300_571_CR_BLOCK_CLKRQ_ENABLE,
+ gpio->base + U300_571_CR);
+ u300_gpio_init_coh901571(gpio, plat);
+ } else {
+ dev_err(gpio->dev, "unknown block variant\n");
+ err = -ENODEV;
+ goto err_unknown_variant;
}
+ /* Add each port with its IRQ separately */
+ INIT_LIST_HEAD(&gpio->port_list);
+ for (portno = 0 ; portno < plat->ports; portno++) {
+ struct u300_gpio_port *port =
+ kmalloc(sizeof(struct u300_gpio_port), GFP_KERNEL);
+
+ if (!port) {
+ dev_err(gpio->dev, "out of memory\n");
+ err = -ENOMEM;
+ goto err_no_port;
+ }
+
+ snprintf(port->name, 8, "gpio%d", portno);
+ port->number = portno;
+ port->gpio = gpio;
+
+ port->irq = platform_get_irq_byname(pdev,
+ port->name);
+
+ dev_dbg(gpio->dev, "register IRQ %d for %s\n", port->irq,
+ port->name);
+
+ irq_set_chained_handler(port->irq, u300_gpio_irq_handler);
+ irq_set_handler_data(port->irq, port);
+
+ /* For each GPIO pin set the unique IRQ handler */
+ for (i = 0; i < U300_GPIO_PINS_PER_PORT; i++) {
+ int irqno = gpio->irq_base + (portno << 3) + i;
+
+ dev_dbg(gpio->dev, "handler for IRQ %d on %s\n",
+ irqno, port->name);
+ irq_set_chip_and_handler(irqno, &u300_gpio_irqchip,
+ handle_simple_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ irq_set_chip_data(irqno, port);
+ }
+
+ /* Turns off irq force (test register) for this port */
+ writel(0x0, gpio->base + portno * gpio->stride + ifr);
+
+ list_add_tail(&port->node, &gpio->port_list);
+ }
+ dev_dbg(gpio->dev, "initialized %d GPIO ports\n", portno);
+
+ err = gpiochip_add(&gpio->chip);
+ if (err) {
+ dev_err(gpio->dev, "unable to add gpiochip: %d\n", err);
+ goto err_no_chip;
+ }
+
+ platform_set_drvdata(pdev, gpio);
+
return 0;
- err_no_irq:
- for (i = 0; i < num_irqs; i++)
- free_irq(gpio_ports[i].irq, &gpio_ports[i]);
- iounmap(virtbase);
- err_no_ioremap:
- release_mem_region(memres->start, resource_size(memres));
- err_no_ioregion:
- err_no_resource:
- clk_disable(clk);
- err_no_clk_enable:
- clk_put(clk);
- err_no_clk:
- dev_info(gpiodev, "module ERROR:%d\n", err);
+err_no_chip:
+err_no_port:
+ u300_gpio_free_ports(gpio);
+err_unknown_variant:
+ iounmap(gpio->base);
+err_no_ioremap:
+ release_mem_region(gpio->memres->start, resource_size(gpio->memres));
+err_no_ioregion:
+err_no_resource:
+ clk_disable(gpio->clk);
+err_no_clk_enable:
+ clk_put(gpio->clk);
+err_no_clk:
+ kfree(gpio);
+ dev_info(&pdev->dev, "module ERROR:%d\n", err);
return err;
}
-static int __exit gpio_remove(struct platform_device *pdev)
+static int __exit u300_gpio_remove(struct platform_device *pdev)
{
- int i;
+ struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev);
+ struct u300_gpio *gpio = platform_get_drvdata(pdev);
+ int err;
/* Turn off the GPIO block */
- writel(0x00000000U, virtbase + U300_GPIO_CR);
- for (i = 0 ; i < U300_GPIO_NUM_PORTS; i++)
- free_irq(gpio_ports[i].irq, &gpio_ports[i]);
- iounmap(virtbase);
- release_mem_region(memres->start, resource_size(memres));
- clk_disable(clk);
- clk_put(clk);
+ if (plat->variant == U300_GPIO_COH901335)
+ writel(0x00000000U, gpio->base + U300_335_CR);
+ if (plat->variant == U300_GPIO_COH901571_3_BS335 ||
+ plat->variant == U300_GPIO_COH901571_3_BS365)
+ writel(0x00000000U, gpio->base + U300_571_CR);
+
+ err = gpiochip_remove(&gpio->chip);
+ if (err < 0) {
+ dev_err(gpio->dev, "unable to remove gpiochip: %d\n", err);
+ return err;
+ }
+ u300_gpio_free_ports(gpio);
+ iounmap(gpio->base);
+ release_mem_region(gpio->memres->start,
+ resource_size(gpio->memres));
+ clk_disable(gpio->clk);
+ clk_put(gpio->clk);
+ platform_set_drvdata(pdev, NULL);
+ kfree(gpio);
return 0;
}
-static struct platform_driver gpio_driver = {
+static struct platform_driver u300_gpio_driver = {
.driver = {
.name = "u300-gpio",
},
- .remove = __exit_p(gpio_remove),
+ .remove = __exit_p(u300_gpio_remove),
};
static int __init u300_gpio_init(void)
{
- return platform_driver_probe(&gpio_driver, gpio_probe);
+ return platform_driver_probe(&u300_gpio_driver, u300_gpio_probe);
}
static void __exit u300_gpio_exit(void)
{
- platform_driver_unregister(&gpio_driver);
+ platform_driver_unregister(&u300_gpio_driver);
}
arch_initcall(u300_gpio_init);
module_exit(u300_gpio_exit);
MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
-
-#ifdef U300_COH901571_3
-MODULE_DESCRIPTION("ST-Ericsson AB COH 901 571/3 GPIO driver");
-#endif
-
-#ifdef U300_COH901335
-MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335 GPIO driver");
-#endif
-
+MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335/COH 901 571/3 GPIO driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c
index e88c644..14cc88a 100644
--- a/drivers/gpu/drm/radeon/atom.c
+++ b/drivers/gpu/drm/radeon/atom.c
@@ -277,7 +277,12 @@
case ATOM_ARG_FB:
idx = U8(*ptr);
(*ptr)++;
- val = gctx->scratch[((gctx->fb_base + idx) / 4)];
+ if ((gctx->fb_base + (idx * 4)) > gctx->scratch_size_bytes) {
+ DRM_ERROR("ATOM: fb read beyond scratch region: %d vs. %d\n",
+ gctx->fb_base + (idx * 4), gctx->scratch_size_bytes);
+ val = 0;
+ } else
+ val = gctx->scratch[(gctx->fb_base / 4) + idx];
if (print)
DEBUG("FB[0x%02X]", idx);
break;
@@ -531,7 +536,11 @@
case ATOM_ARG_FB:
idx = U8(*ptr);
(*ptr)++;
- gctx->scratch[((gctx->fb_base + idx) / 4)] = val;
+ if ((gctx->fb_base + (idx * 4)) > gctx->scratch_size_bytes) {
+ DRM_ERROR("ATOM: fb write beyond scratch region: %d vs. %d\n",
+ gctx->fb_base + (idx * 4), gctx->scratch_size_bytes);
+ } else
+ gctx->scratch[(gctx->fb_base / 4) + idx] = val;
DEBUG("FB[0x%02X]", idx);
break;
case ATOM_ARG_PLL:
@@ -1370,11 +1379,13 @@
usage_bytes = firmware_usage->asFirmwareVramReserveInfo[0].usFirmwareUseInKb * 1024;
}
+ ctx->scratch_size_bytes = 0;
if (usage_bytes == 0)
usage_bytes = 20 * 1024;
/* allocate some scratch memory */
ctx->scratch = kzalloc(usage_bytes, GFP_KERNEL);
if (!ctx->scratch)
return -ENOMEM;
+ ctx->scratch_size_bytes = usage_bytes;
return 0;
}
diff --git a/drivers/gpu/drm/radeon/atom.h b/drivers/gpu/drm/radeon/atom.h
index a589a55..93cfe20 100644
--- a/drivers/gpu/drm/radeon/atom.h
+++ b/drivers/gpu/drm/radeon/atom.h
@@ -137,6 +137,7 @@
int cs_equal, cs_above;
int io_mode;
uint32_t *scratch;
+ int scratch_size_bytes;
};
extern int atom_debug;
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index c742944..a515b2a 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -466,7 +466,7 @@
return;
}
args.v2.ucEnable = enable;
- if ((ss->percentage == 0) || (ss->type & ATOM_EXTERNAL_SS_MASK))
+ if ((ss->percentage == 0) || (ss->type & ATOM_EXTERNAL_SS_MASK) || ASIC_IS_DCE41(rdev))
args.v2.ucEnable = ATOM_DISABLE;
} else if (ASIC_IS_DCE3(rdev)) {
args.v1.usSpreadSpectrumPercentage = cpu_to_le16(ss->percentage);
diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index 4da2388..79e8ebc 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -129,7 +129,9 @@
for (retry = 0; retry < 4; retry++) {
ret = radeon_process_aux_ch(dig_connector->dp_i2c_bus,
msg, msg_bytes, NULL, 0, delay, &ack);
- if (ret < 0)
+ if (ret == -EBUSY)
+ continue;
+ else if (ret < 0)
return ret;
if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK)
return send_bytes;
@@ -160,7 +162,9 @@
for (retry = 0; retry < 4; retry++) {
ret = radeon_process_aux_ch(dig_connector->dp_i2c_bus,
msg, msg_bytes, recv, recv_bytes, delay, &ack);
- if (ret < 0)
+ if (ret == -EBUSY)
+ continue;
+ else if (ret < 0)
return ret;
if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK)
return ret;
@@ -236,7 +240,9 @@
for (retry = 0; retry < 4; retry++) {
ret = radeon_process_aux_ch(auxch,
msg, msg_bytes, reply, reply_bytes, 0, &ack);
- if (ret < 0) {
+ if (ret == -EBUSY)
+ continue;
+ else if (ret < 0) {
DRM_DEBUG_KMS("aux_ch failed %d\n", ret);
return ret;
}
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index bce63fd..449c3d8 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -1303,23 +1303,14 @@
/* get the DPCD from the bridge */
radeon_dp_getdpcd(radeon_connector);
- if (radeon_hpd_sense(rdev, radeon_connector->hpd.hpd))
- ret = connector_status_connected;
- else {
- /* need to setup ddc on the bridge */
- if (encoder)
- radeon_atom_ext_encoder_setup_ddc(encoder);
+ if (encoder) {
+ /* setup ddc on the bridge */
+ radeon_atom_ext_encoder_setup_ddc(encoder);
if (radeon_ddc_probe(radeon_connector,
- radeon_connector->requires_extended_probe))
+ radeon_connector->requires_extended_probe)) /* try DDC */
ret = connector_status_connected;
- }
-
- if ((ret == connector_status_disconnected) &&
- radeon_connector->dac_load_detect) {
- struct drm_encoder *encoder = radeon_best_single_encoder(connector);
- struct drm_encoder_helper_funcs *encoder_funcs;
- if (encoder) {
- encoder_funcs = encoder->helper_private;
+ else if (radeon_connector->dac_load_detect) { /* try load detection */
+ struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
ret = encoder_funcs->detect(encoder, connector);
}
}
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index 13690f3..eb3f6dc 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -1638,7 +1638,17 @@
break;
case 2:
args.v2.ucCRTC = radeon_crtc->crtc_id;
- args.v2.ucEncodeMode = atombios_get_encoder_mode(encoder);
+ if (radeon_encoder_is_dp_bridge(encoder)) {
+ struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
+
+ if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)
+ args.v2.ucEncodeMode = ATOM_ENCODER_MODE_LVDS;
+ else if (connector->connector_type == DRM_MODE_CONNECTOR_VGA)
+ args.v2.ucEncodeMode = ATOM_ENCODER_MODE_CRT;
+ else
+ args.v2.ucEncodeMode = atombios_get_encoder_mode(encoder);
+ } else
+ args.v2.ucEncodeMode = atombios_get_encoder_mode(encoder);
switch (radeon_encoder->encoder_id) {
case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
@@ -1755,9 +1765,17 @@
/* DCE4/5 */
if (ASIC_IS_DCE4(rdev)) {
dig = radeon_encoder->enc_priv;
- if (ASIC_IS_DCE41(rdev))
- return radeon_crtc->crtc_id;
- else {
+ if (ASIC_IS_DCE41(rdev)) {
+ /* ontario follows DCE4 */
+ if (rdev->family == CHIP_PALM) {
+ if (dig->linkb)
+ return 1;
+ else
+ return 0;
+ } else
+ /* llano follows DCE3.2 */
+ return radeon_crtc->crtc_id;
+ } else {
switch (radeon_encoder->encoder_id) {
case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
if (dig->linkb)
diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c
index ae3c6f5..082fcae 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_util.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_util.c
@@ -321,7 +321,7 @@
struct ttm_mem_type_manager *man = &bdev->man[new_mem->mem_type];
struct ttm_tt *ttm = bo->ttm;
struct ttm_mem_reg *old_mem = &bo->mem;
- struct ttm_mem_reg old_copy;
+ struct ttm_mem_reg old_copy = *old_mem;
void *old_iomap;
void *new_iomap;
int ret;
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index f2b377c..36d7f27 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -390,7 +390,7 @@
{
if (is_word_sized(reg))
return LM75_TEMP_FROM_REG(regval);
- return regval * 1000;
+ return ((s8)regval) * 1000;
}
static inline u16
@@ -398,7 +398,8 @@
{
if (is_word_sized(reg))
return LM75_TEMP_TO_REG(temp);
- return DIV_ROUND_CLOSEST(SENSORS_LIMIT(temp, -127000, 128000), 1000);
+ return (s8)DIV_ROUND_CLOSEST(SENSORS_LIMIT(temp, -127000, 128000),
+ 1000);
}
/* Some of analog inputs have internal scaling (2x), 8mV is ADC LSB */
@@ -1715,7 +1716,8 @@
}
/* Get the monitoring functions started */
-static inline void __devinit w83627ehf_init_device(struct w83627ehf_data *data)
+static inline void __devinit w83627ehf_init_device(struct w83627ehf_data *data,
+ enum kinds kind)
{
int i;
u8 tmp, diode;
@@ -1746,10 +1748,16 @@
w83627ehf_write_value(data, W83627EHF_REG_VBAT, tmp | 0x01);
/* Get thermal sensor types */
- diode = w83627ehf_read_value(data, W83627EHF_REG_DIODE);
+ switch (kind) {
+ case w83627ehf:
+ diode = w83627ehf_read_value(data, W83627EHF_REG_DIODE);
+ break;
+ default:
+ diode = 0x70;
+ }
for (i = 0; i < 3; i++) {
if ((tmp & (0x02 << i)))
- data->temp_type[i] = (diode & (0x10 << i)) ? 1 : 2;
+ data->temp_type[i] = (diode & (0x10 << i)) ? 1 : 3;
else
data->temp_type[i] = 4; /* thermistor */
}
@@ -2016,7 +2024,7 @@
}
/* Initialize the chip */
- w83627ehf_init_device(data);
+ w83627ehf_init_device(data, sio_data->kind);
data->vrm = vid_which_vrm();
superio_enter(sio_data->sioreg);
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index 5d8aed5..c01e951 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -35,7 +35,7 @@
#include <linux/slab.h>
#include <mach/hardware.h> /* Pick up IXP2000-specific bits */
-#include <mach/gpio.h>
+#include <mach/gpio-ixp2000.h>
static inline int ixp2000_scl_pin(void *data)
{
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 9827c5e..811dbbd 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -327,7 +327,7 @@
select BLK_DEV_IDEPCI
help
This is a driver for the OPTi 82C621 EIDE controller.
- Please read the comments at the top of <file:drivers/ide/pci/opti621.c>.
+ Please read the comments at the top of <file:drivers/ide/opti621.c>.
config BLK_DEV_RZ1000
tristate "RZ1000 chipset bugfix/support"
@@ -365,7 +365,7 @@
normal dual channel support.
Please read the comments at the top of
- <file:drivers/ide/pci/alim15x3.c>.
+ <file:drivers/ide/alim15x3.c>.
If unsure, say N.
@@ -528,7 +528,7 @@
This driver adds detection and support for the NS87415 chip
(used mainly on SPARC64 and PA-RISC machines).
- Please read the comments at the top of <file:drivers/ide/pci/ns87415.c>.
+ Please read the comments at the top of <file:drivers/ide/ns87415.c>.
config BLK_DEV_PDC202XX_OLD
tristate "PROMISE PDC202{46|62|65|67} support"
@@ -547,7 +547,7 @@
for more than one card.
Please read the comments at the top of
- <file:drivers/ide/pci/pdc202xx_old.c>.
+ <file:drivers/ide/pdc202xx_old.c>.
If unsure, say N.
@@ -593,7 +593,7 @@
ATA100: SiS635, SiS645, SiS650, SiS730, SiS735, SiS740,
SiS745, SiS750
- Please read the comments at the top of <file:drivers/ide/pci/sis5513.c>.
+ Please read the comments at the top of <file:drivers/ide/sis5513.c>.
config BLK_DEV_SL82C105
tristate "Winbond SL82c105 support"
@@ -616,7 +616,7 @@
look-a-like to the PIIX4 it should be a nice addition.
Please read the comments at the top of
- <file:drivers/ide/pci/slc90e66.c>.
+ <file:drivers/ide/slc90e66.c>.
config BLK_DEV_TRM290
tristate "Tekram TRM290 chipset support"
@@ -625,7 +625,7 @@
This driver adds support for bus master DMA transfers
using the Tekram TRM290 PCI IDE chip. Volunteers are
needed for further tweaking and development.
- Please read the comments at the top of <file:drivers/ide/pci/trm290.c>.
+ Please read the comments at the top of <file:drivers/ide/trm290.c>.
config BLK_DEV_VIA82CXXX
tristate "VIA82CXXX chipset support"
@@ -836,7 +836,7 @@
of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
I/O speeds to be set as well.
See the files <file:Documentation/ide/ide.txt> and
- <file:drivers/ide/legacy/ali14xx.c> for more info.
+ <file:drivers/ide/ali14xx.c> for more info.
config BLK_DEV_DTC2278
tristate "DTC-2278 support"
@@ -847,7 +847,7 @@
boot parameter. It enables support for the secondary IDE interface
of the DTC-2278 card, and permits faster I/O speeds to be set as
well. See the <file:Documentation/ide/ide.txt> and
- <file:drivers/ide/legacy/dtc2278.c> files for more info.
+ <file:drivers/ide/dtc2278.c> files for more info.
config BLK_DEV_HT6560B
tristate "Holtek HT6560B support"
@@ -858,7 +858,7 @@
boot parameter. It enables support for the secondary IDE interface
of the Holtek card, and permits faster I/O speeds to be set as well.
See the <file:Documentation/ide/ide.txt> and
- <file:drivers/ide/legacy/ht6560b.c> files for more info.
+ <file:drivers/ide/ht6560b.c> files for more info.
config BLK_DEV_QD65XX
tristate "QDI QD65xx support"
@@ -867,7 +867,7 @@
help
This driver is enabled at runtime using the "qd65xx.probe" kernel
boot parameter. It permits faster I/O speeds to be set. See the
- <file:Documentation/ide/ide.txt> and <file:drivers/ide/legacy/qd65xx.c>
+ <file:Documentation/ide/ide.txt> and <file:drivers/ide/qd65xx.c>
for more info.
config BLK_DEV_UMC8672
@@ -879,7 +879,7 @@
boot parameter. It enables support for the secondary IDE interface
of the UMC-8672, and permits faster I/O speeds to be set as well.
See the files <file:Documentation/ide/ide.txt> and
- <file:drivers/ide/legacy/umc8672.c> for more info.
+ <file:drivers/ide/umc8672.c> for more info.
endif
diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c
index 000a78e..6dede8f 100644
--- a/drivers/ide/at91_ide.c
+++ b/drivers/ide/at91_ide.c
@@ -28,7 +28,7 @@
#include <linux/platform_device.h>
#include <mach/board.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <mach/at91sam9_smc.h>
#define DRV_NAME "at91_ide"
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index 33d0bdc..323bcdf 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -35,7 +35,7 @@
#include <linux/mutex.h>
#include <linux/errno.h>
#include <linux/slab.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/keypad.h>
#include <plat/menelaus.h>
#include <asm/irq.h>
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 0dc97ec..9dea718 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -1124,11 +1124,8 @@
for (i = 0; i < 8; i++)
__set_bit(BTN_0 + i, input_dev->keybit);
- if (wacom_wac->features.type != WACOM_21UX2) {
- input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
- input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
- }
-
+ input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
+ input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index c621c98..a88f3cb 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -306,6 +306,11 @@
return (pte->val & 3) != 0;
}
+static inline bool dma_pte_superpage(struct dma_pte *pte)
+{
+ return (pte->val & (1 << 7));
+}
+
static inline int first_pte_in_page(struct dma_pte *pte)
{
return !((unsigned long)pte & ~VTD_PAGE_MASK);
@@ -404,6 +409,9 @@
static int intel_iommu_strict;
static int intel_iommu_superpage = 1;
+int intel_iommu_gfx_mapped;
+EXPORT_SYMBOL_GPL(intel_iommu_gfx_mapped);
+
#define DUMMY_DEVICE_DOMAIN_INFO ((struct device_domain_info *)(-1))
static DEFINE_SPINLOCK(device_domain_lock);
static LIST_HEAD(device_domain_list);
@@ -577,17 +585,18 @@
static void domain_update_iommu_superpage(struct dmar_domain *domain)
{
- int i, mask = 0xf;
+ struct dmar_drhd_unit *drhd;
+ struct intel_iommu *iommu = NULL;
+ int mask = 0xf;
if (!intel_iommu_superpage) {
domain->iommu_superpage = 0;
return;
}
- domain->iommu_superpage = 4; /* 1TiB */
-
- for_each_set_bit(i, &domain->iommu_bmp, g_num_of_iommus) {
- mask |= cap_super_page_val(g_iommus[i]->cap);
+ /* set iommu_superpage to the smallest common denominator */
+ for_each_active_iommu(iommu, drhd) {
+ mask &= cap_super_page_val(iommu->cap);
if (!mask) {
break;
}
@@ -730,29 +739,23 @@
}
static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain,
- unsigned long pfn, int large_level)
+ unsigned long pfn, int target_level)
{
int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT;
struct dma_pte *parent, *pte = NULL;
int level = agaw_to_level(domain->agaw);
- int offset, target_level;
+ int offset;
BUG_ON(!domain->pgd);
BUG_ON(addr_width < BITS_PER_LONG && pfn >> addr_width);
parent = domain->pgd;
- /* Search pte */
- if (!large_level)
- target_level = 1;
- else
- target_level = large_level;
-
while (level > 0) {
void *tmp_page;
offset = pfn_level_offset(pfn, level);
pte = &parent[offset];
- if (!large_level && (pte->val & DMA_PTE_LARGE_PAGE))
+ if (!target_level && (dma_pte_superpage(pte) || !dma_pte_present(pte)))
break;
if (level == target_level)
break;
@@ -816,13 +819,14 @@
}
/* clear last level pte, a tlb flush should be followed */
-static void dma_pte_clear_range(struct dmar_domain *domain,
+static int dma_pte_clear_range(struct dmar_domain *domain,
unsigned long start_pfn,
unsigned long last_pfn)
{
int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT;
unsigned int large_page = 1;
struct dma_pte *first_pte, *pte;
+ int order;
BUG_ON(addr_width < BITS_PER_LONG && start_pfn >> addr_width);
BUG_ON(addr_width < BITS_PER_LONG && last_pfn >> addr_width);
@@ -846,6 +850,9 @@
(void *)pte - (void *)first_pte);
} while (start_pfn && start_pfn <= last_pfn);
+
+ order = (large_page - 1) * 9;
+ return order;
}
/* free page table pages. last level pte should already be cleared */
@@ -3226,9 +3233,6 @@
}
}
- if (dmar_map_gfx)
- return;
-
for_each_drhd_unit(drhd) {
int i;
if (drhd->ignored || drhd->include_all)
@@ -3236,18 +3240,23 @@
for (i = 0; i < drhd->devices_cnt; i++)
if (drhd->devices[i] &&
- !IS_GFX_DEVICE(drhd->devices[i]))
+ !IS_GFX_DEVICE(drhd->devices[i]))
break;
if (i < drhd->devices_cnt)
continue;
- /* bypass IOMMU if it is just for gfx devices */
- drhd->ignored = 1;
- for (i = 0; i < drhd->devices_cnt; i++) {
- if (!drhd->devices[i])
- continue;
- drhd->devices[i]->dev.archdata.iommu = DUMMY_DEVICE_DOMAIN_INFO;
+ /* This IOMMU has *only* gfx devices. Either bypass it or
+ set the gfx_mapped flag, as appropriate */
+ if (dmar_map_gfx) {
+ intel_iommu_gfx_mapped = 1;
+ } else {
+ drhd->ignored = 1;
+ for (i = 0; i < drhd->devices_cnt; i++) {
+ if (!drhd->devices[i])
+ continue;
+ drhd->devices[i]->dev.archdata.iommu = DUMMY_DEVICE_DOMAIN_INFO;
+ }
}
}
}
@@ -3568,6 +3577,8 @@
found = 1;
}
+ spin_unlock_irqrestore(&device_domain_lock, flags);
+
if (found == 0) {
unsigned long tmp_flags;
spin_lock_irqsave(&domain->iommu_lock, tmp_flags);
@@ -3584,8 +3595,6 @@
spin_unlock_irqrestore(&iommu->lock, tmp_flags);
}
}
-
- spin_unlock_irqrestore(&device_domain_lock, flags);
}
static void vm_domain_remove_all_dev_info(struct dmar_domain *domain)
@@ -3739,6 +3748,7 @@
vm_domain_exit(dmar_domain);
return -ENOMEM;
}
+ domain_update_iommu_cap(dmar_domain);
domain->priv = dmar_domain;
return 0;
@@ -3864,14 +3874,15 @@
{
struct dmar_domain *dmar_domain = domain->priv;
size_t size = PAGE_SIZE << gfp_order;
+ int order;
- dma_pte_clear_range(dmar_domain, iova >> VTD_PAGE_SHIFT,
+ order = dma_pte_clear_range(dmar_domain, iova >> VTD_PAGE_SHIFT,
(iova + size - 1) >> VTD_PAGE_SHIFT);
if (dmar_domain->max_addr == iova + size)
dmar_domain->max_addr = iova;
- return gfp_order;
+ return order;
}
static phys_addr_t intel_iommu_iova_to_phys(struct iommu_domain *domain,
@@ -3950,7 +3961,11 @@
if (!(ggc & GGC_MEMORY_VT_ENABLED)) {
printk(KERN_INFO "DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics\n");
dmar_map_gfx = 0;
- }
+ } else if (dmar_map_gfx) {
+ /* we have to ensure the gfx device is idle before we flush */
+ printk(KERN_INFO "DMAR: Disabling batched IOTLB flush on Ironlake\n");
+ intel_iommu_strict = 1;
+ }
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0040, quirk_calpella_no_shadow_gtt);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0044, quirk_calpella_no_shadow_gtt);
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 49da55c..8c2a000 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -1698,6 +1698,8 @@
}
ti->num_flush_requests = 1;
+ ti->discard_zeroes_data_unsupported = 1;
+
return 0;
bad:
diff --git a/drivers/md/dm-flakey.c b/drivers/md/dm-flakey.c
index 89f73ca..f84c080 100644
--- a/drivers/md/dm-flakey.c
+++ b/drivers/md/dm-flakey.c
@@ -81,8 +81,10 @@
* corrupt_bio_byte <Nth_byte> <direction> <value> <bio_flags>
*/
if (!strcasecmp(arg_name, "corrupt_bio_byte")) {
- if (!argc)
+ if (!argc) {
ti->error = "Feature corrupt_bio_byte requires parameters";
+ return -EINVAL;
+ }
r = dm_read_arg(_args + 1, as, &fc->corrupt_bio_byte, &ti->error);
if (r)
diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c
index f821470..32ac708 100644
--- a/drivers/md/dm-kcopyd.c
+++ b/drivers/md/dm-kcopyd.c
@@ -628,6 +628,7 @@
job->kc = kc;
job->fn = fn;
job->context = context;
+ job->master_job = job;
atomic_inc(&kc->nr_jobs);
diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index a002dd8..86df8b2 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -449,7 +449,7 @@
rs->ti->error = "write_mostly option is only valid for RAID1";
return -EINVAL;
}
- if (value > rs->md.raid_disks) {
+ if (value >= rs->md.raid_disks) {
rs->ti->error = "Invalid write_mostly drive index given";
return -EINVAL;
}
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 986b875..bc04518 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1238,14 +1238,15 @@
return;
template_disk = dm_table_get_integrity_disk(t, true);
- if (!template_disk &&
- blk_integrity_is_initialized(dm_disk(t->md))) {
+ if (template_disk)
+ blk_integrity_register(dm_disk(t->md),
+ blk_get_integrity(template_disk));
+ else if (blk_integrity_is_initialized(dm_disk(t->md)))
DMWARN("%s: device no longer has a valid integrity profile",
dm_device_name(t->md));
- return;
- }
- blk_integrity_register(dm_disk(t->md),
- blk_get_integrity(template_disk));
+ else
+ DMWARN("%s: unable to establish an integrity profile",
+ dm_device_name(t->md));
}
static int device_flush_capable(struct dm_target *ti, struct dm_dev *dev,
@@ -1282,6 +1283,22 @@
return 0;
}
+static bool dm_table_discard_zeroes_data(struct dm_table *t)
+{
+ struct dm_target *ti;
+ unsigned i = 0;
+
+ /* Ensure that all targets supports discard_zeroes_data. */
+ while (i < dm_table_get_num_targets(t)) {
+ ti = dm_table_get_target(t, i++);
+
+ if (ti->discard_zeroes_data_unsupported)
+ return 0;
+ }
+
+ return 1;
+}
+
void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
struct queue_limits *limits)
{
@@ -1304,6 +1321,9 @@
}
blk_queue_flush(q, flush);
+ if (!dm_table_discard_zeroes_data(t))
+ q->limits.discard_zeroes_data = 0;
+
dm_table_set_integrity(t);
/*
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 5404b22..5c95ccb 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -61,6 +61,11 @@
static void autostart_arrays(int part);
#endif
+/* pers_list is a list of registered personalities protected
+ * by pers_lock.
+ * pers_lock does extra service to protect accesses to
+ * mddev->thread when the mutex cannot be held.
+ */
static LIST_HEAD(pers_list);
static DEFINE_SPINLOCK(pers_lock);
@@ -739,7 +744,12 @@
} else
mutex_unlock(&mddev->reconfig_mutex);
+ /* was we've dropped the mutex we need a spinlock to
+ * make sur the thread doesn't disappear
+ */
+ spin_lock(&pers_lock);
md_wakeup_thread(mddev->thread);
+ spin_unlock(&pers_lock);
}
static mdk_rdev_t * find_rdev_nr(mddev_t *mddev, int nr)
@@ -6429,11 +6439,18 @@
return thread;
}
-void md_unregister_thread(mdk_thread_t *thread)
+void md_unregister_thread(mdk_thread_t **threadp)
{
+ mdk_thread_t *thread = *threadp;
if (!thread)
return;
dprintk("interrupting MD-thread pid %d\n", task_pid_nr(thread->tsk));
+ /* Locking ensures that mddev_unlock does not wake_up a
+ * non-existent thread
+ */
+ spin_lock(&pers_lock);
+ *threadp = NULL;
+ spin_unlock(&pers_lock);
kthread_stop(thread->tsk);
kfree(thread);
@@ -7340,8 +7357,7 @@
mdk_rdev_t *rdev;
/* resync has finished, collect result */
- md_unregister_thread(mddev->sync_thread);
- mddev->sync_thread = NULL;
+ md_unregister_thread(&mddev->sync_thread);
if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery) &&
!test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) {
/* success...*/
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 1e586bb..0a309dc 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -560,7 +560,7 @@
extern int unregister_md_personality(struct mdk_personality *p);
extern mdk_thread_t * md_register_thread(void (*run) (mddev_t *mddev),
mddev_t *mddev, const char *name);
-extern void md_unregister_thread(mdk_thread_t *thread);
+extern void md_unregister_thread(mdk_thread_t **threadp);
extern void md_wakeup_thread(mdk_thread_t *thread);
extern void md_check_recovery(mddev_t *mddev);
extern void md_write_start(mddev_t *mddev, struct bio *bi);
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index 3535c23..d5b5fb3 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -514,8 +514,7 @@
{
multipath_conf_t *conf = mddev->private;
- md_unregister_thread(mddev->thread);
- mddev->thread = NULL;
+ md_unregister_thread(&mddev->thread);
blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
mempool_destroy(conf->pool);
kfree(conf->multipaths);
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index f4622dd..d9587df 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -2562,8 +2562,7 @@
raise_barrier(conf);
lower_barrier(conf);
- md_unregister_thread(mddev->thread);
- mddev->thread = NULL;
+ md_unregister_thread(&mddev->thread);
if (conf->r1bio_pool)
mempool_destroy(conf->r1bio_pool);
kfree(conf->mirrors);
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index d7a8468..0cd9672 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -2955,7 +2955,7 @@
return 0;
out_free_conf:
- md_unregister_thread(mddev->thread);
+ md_unregister_thread(&mddev->thread);
if (conf->r10bio_pool)
mempool_destroy(conf->r10bio_pool);
safe_put_page(conf->tmppage);
@@ -2973,8 +2973,7 @@
raise_barrier(conf, 0);
lower_barrier(conf);
- md_unregister_thread(mddev->thread);
- mddev->thread = NULL;
+ md_unregister_thread(&mddev->thread);
blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
if (conf->r10bio_pool)
mempool_destroy(conf->r10bio_pool);
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 43709fa..ac5e8b5 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -4941,8 +4941,7 @@
return 0;
abort:
- md_unregister_thread(mddev->thread);
- mddev->thread = NULL;
+ md_unregister_thread(&mddev->thread);
if (conf) {
print_raid5_conf(conf);
free_conf(conf);
@@ -4956,8 +4955,7 @@
{
raid5_conf_t *conf = mddev->private;
- md_unregister_thread(mddev->thread);
- mddev->thread = NULL;
+ md_unregister_thread(&mddev->thread);
if (mddev->queue)
mddev->queue->backing_dev_info.congested_fn = NULL;
free_conf(conf);
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index d721565..a5c9ed1 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -181,7 +181,7 @@
* TODO: In the long run all drivers that use v4l2_device should use the
* v4l2_device release callback. This check will then be unnecessary.
*/
- if (v4l2_dev->release == NULL)
+ if (v4l2_dev && v4l2_dev->release == NULL)
v4l2_dev = NULL;
/* Release video_device and perform other
diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c
index 9cee8e7..af5d9d0 100644
--- a/drivers/mfd/menelaus.c
+++ b/drivers/mfd/menelaus.c
@@ -44,7 +44,7 @@
#include <asm/mach/irq.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/menelaus.h>
#define DRIVER_NAME "menelaus"
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index a6c3290..2dba999 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -33,7 +33,7 @@
#include <plat/board.h>
#include <plat/mmc.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/dma.h>
#include <plat/mux.h>
#include <plat/fpga.h>
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 18b0bd3..21b00ce 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -21,7 +21,9 @@
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
+
+#include <mach/gpio-tegra.h>
#include <mach/sdhci.h>
#include "sdhci-pltfm.h"
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index 78017eb..9e6b498 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -26,7 +26,7 @@
#include <asm/io.h>
#include <mach/hardware.h>
#include <asm/sizes.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/board-ams-delta.h>
/*
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index a916dec..6a1d6d9 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -40,7 +40,7 @@
#include <asm/mach/flash.h>
#include <plat/gpmc.h>
#include <plat/onenand.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/dma.h>
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 29dc435..48b4ec1 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -35,7 +35,7 @@
#include <asm/mach-types.h>
#include <mach/at91rm9200_emac.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <mach/board.h>
#include "at91_ether.h"
diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index e46df53..9a7eb3b 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -239,13 +239,19 @@
* FUNC_N_CLID_X = N * NUM_SPECIAL_CLIENTS + FUNC_0_CLID_X
*
*/
-/* iSCSI L2 */
-#define BNX2X_ISCSI_ETH_CL_ID_IDX 1
-#define BNX2X_ISCSI_ETH_CID 49
+enum {
+ BNX2X_ISCSI_ETH_CL_ID_IDX,
+ BNX2X_FCOE_ETH_CL_ID_IDX,
+ BNX2X_MAX_CNIC_ETH_CL_ID_IDX,
+};
-/* FCoE L2 */
-#define BNX2X_FCOE_ETH_CL_ID_IDX 2
-#define BNX2X_FCOE_ETH_CID 50
+#define BNX2X_CNIC_START_ETH_CID 48
+enum {
+ /* iSCSI L2 */
+ BNX2X_ISCSI_ETH_CID = BNX2X_CNIC_START_ETH_CID,
+ /* FCoE L2 */
+ BNX2X_FCOE_ETH_CID,
+};
/** Additional rings budgeting */
#ifdef BCM_CNIC
diff --git a/drivers/net/bnx2x/bnx2x_cmn.h b/drivers/net/bnx2x/bnx2x_cmn.h
index 223bfee..2dc1199 100644
--- a/drivers/net/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/bnx2x/bnx2x_cmn.h
@@ -1297,7 +1297,7 @@
static inline u8 bnx2x_cnic_eth_cl_id(struct bnx2x *bp, u8 cl_idx)
{
return bp->cnic_base_cl_id + cl_idx +
- (bp->pf_num >> 1) * NON_ETH_CONTEXT_USE;
+ (bp->pf_num >> 1) * BNX2X_MAX_CNIC_ETH_CL_ID_IDX;
}
static inline u8 bnx2x_cnic_fw_sb_id(struct bnx2x *bp)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 6d79b78..de3d351 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1435,6 +1435,8 @@
struct sk_buff *skb = *pskb;
struct slave *slave;
struct bonding *bond;
+ void (*recv_probe)(struct sk_buff *, struct bonding *,
+ struct slave *);
skb = skb_share_check(skb, GFP_ATOMIC);
if (unlikely(!skb))
@@ -1448,11 +1450,12 @@
if (bond->params.arp_interval)
slave->dev->last_rx = jiffies;
- if (bond->recv_probe) {
+ recv_probe = ACCESS_ONCE(bond->recv_probe);
+ if (recv_probe) {
struct sk_buff *nskb = skb_clone(skb, GFP_ATOMIC);
if (likely(nskb)) {
- bond->recv_probe(nskb, bond, slave);
+ recv_probe(nskb, bond, slave);
dev_kfree_skb(nskb);
}
}
diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c
index 92feac6..4cc6f44 100644
--- a/drivers/net/can/mscan/mscan.c
+++ b/drivers/net/can/mscan/mscan.c
@@ -261,11 +261,13 @@
void __iomem *data = ®s->tx.dsr1_0;
u16 *payload = (u16 *)frame->data;
- /* It is safe to write into dsr[dlc+1] */
- for (i = 0; i < (frame->can_dlc + 1) / 2; i++) {
+ for (i = 0; i < frame->can_dlc / 2; i++) {
out_be16(data, *payload++);
data += 2 + _MSCAN_RESERVED_DSR_SIZE;
}
+ /* write remaining byte if necessary */
+ if (frame->can_dlc & 1)
+ out_8(data, frame->data[frame->can_dlc - 1]);
}
out_8(®s->tx.dlr, frame->can_dlc);
@@ -330,10 +332,13 @@
void __iomem *data = ®s->rx.dsr1_0;
u16 *payload = (u16 *)frame->data;
- for (i = 0; i < (frame->can_dlc + 1) / 2; i++) {
+ for (i = 0; i < frame->can_dlc / 2; i++) {
*payload++ = in_be16(data);
data += 2 + _MSCAN_RESERVED_DSR_SIZE;
}
+ /* read remaining byte if necessary */
+ if (frame->can_dlc & 1)
+ frame->data[frame->can_dlc - 1] = in_8(data);
}
out_8(®s->canrflg, MSCAN_RXF);
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 05172c3..376e3e9 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -239,7 +239,7 @@
dest = macvlan_hash_lookup(port, eth->h_dest);
if (dest && dest->mode == MACVLAN_MODE_BRIDGE) {
/* send to lowerdev first for its network taps */
- vlan->forward(vlan->lowerdev, skb);
+ dev_forward_skb(vlan->lowerdev, skb);
return NET_XMIT_SUCCESS;
}
diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c
index 6e03de0..f76ab6b 100644
--- a/drivers/net/mlx4/en_tx.c
+++ b/drivers/net/mlx4/en_tx.c
@@ -172,7 +172,7 @@
memset(ring->buf, 0, ring->buf_size);
ring->qp_state = MLX4_QP_STATE_RST;
- ring->doorbell_qpn = swab32(ring->qp.qpn << 8);
+ ring->doorbell_qpn = ring->qp.qpn << 8;
mlx4_en_fill_qp_context(priv, ring->size, ring->stride, 1, 0, ring->qpn,
ring->cqn, &ring->context);
@@ -791,7 +791,7 @@
skb_orphan(skb);
if (ring->bf_enabled && desc_size <= MAX_BF && !bounce && !vlan_tag) {
- *(u32 *) (&tx_desc->ctrl.vlan_tag) |= ring->doorbell_qpn;
+ *(__be32 *) (&tx_desc->ctrl.vlan_tag) |= cpu_to_be32(ring->doorbell_qpn);
op_own |= htonl((bf_index & 0xffff) << 8);
/* Ensure new descirptor hits memory
* before setting ownership of this descriptor to HW */
@@ -812,7 +812,7 @@
wmb();
tx_desc->ctrl.owner_opcode = op_own;
wmb();
- writel(ring->doorbell_qpn, ring->bf.uar->map + MLX4_SEND_DOORBELL);
+ iowrite32be(ring->doorbell_qpn, ring->bf.uar->map + MLX4_SEND_DOORBELL);
}
/* Poll CQ here */
diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c
index ed2a397..e888202 100644
--- a/drivers/net/netconsole.c
+++ b/drivers/net/netconsole.c
@@ -307,6 +307,11 @@
return err;
if (enabled < 0 || enabled > 1)
return -EINVAL;
+ if (enabled == nt->enabled) {
+ printk(KERN_INFO "netconsole: network logging has already %s\n",
+ nt->enabled ? "started" : "stopped");
+ return -EINVAL;
+ }
if (enabled) { /* 1 */
diff --git a/drivers/net/pptp.c b/drivers/net/pptp.c
index eae542a..89f829f 100644
--- a/drivers/net/pptp.c
+++ b/drivers/net/pptp.c
@@ -285,8 +285,10 @@
ip_send_check(iph);
ip_local_out(skb);
+ return 1;
tx_error:
+ kfree_skb(skb);
return 1;
}
@@ -305,11 +307,18 @@
}
header = (struct pptp_gre_header *)(skb->data);
+ headersize = sizeof(*header);
/* test if acknowledgement present */
if (PPTP_GRE_IS_A(header->ver)) {
- __u32 ack = (PPTP_GRE_IS_S(header->flags)) ?
- header->ack : header->seq; /* ack in different place if S = 0 */
+ __u32 ack;
+
+ if (!pskb_may_pull(skb, headersize))
+ goto drop;
+ header = (struct pptp_gre_header *)(skb->data);
+
+ /* ack in different place if S = 0 */
+ ack = PPTP_GRE_IS_S(header->flags) ? header->ack : header->seq;
ack = ntohl(ack);
@@ -318,21 +327,18 @@
/* also handle sequence number wrap-around */
if (WRAPPED(ack, opt->ack_recv))
opt->ack_recv = ack;
+ } else {
+ headersize -= sizeof(header->ack);
}
-
/* test if payload present */
if (!PPTP_GRE_IS_S(header->flags))
goto drop;
- headersize = sizeof(*header);
payload_len = ntohs(header->payload_len);
seq = ntohl(header->seq);
- /* no ack present? */
- if (!PPTP_GRE_IS_A(header->ver))
- headersize -= sizeof(header->ack);
/* check for incomplete packet (length smaller than expected) */
- if (skb->len - headersize < payload_len)
+ if (!pskb_may_pull(skb, headersize + payload_len))
goto drop;
payload = skb->data + headersize;
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index c236670..6d657ca 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -2859,7 +2859,7 @@
rtl_writephy(tp, 0x1f, 0x0004);
rtl_writephy(tp, 0x1f, 0x0007);
rtl_writephy(tp, 0x1e, 0x0020);
- rtl_w1w0_phy(tp, 0x06, 0x0000, 0x0100);
+ rtl_w1w0_phy(tp, 0x15, 0x0000, 0x0100);
rtl_writephy(tp, 0x1f, 0x0002);
rtl_writephy(tp, 0x1f, 0x0000);
rtl_writephy(tp, 0x0d, 0x0007);
@@ -3316,6 +3316,37 @@
}
}
+static void rtl_wol_suspend_quirk(struct rtl8169_private *tp)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ switch (tp->mac_version) {
+ case RTL_GIGA_MAC_VER_29:
+ case RTL_GIGA_MAC_VER_30:
+ case RTL_GIGA_MAC_VER_32:
+ case RTL_GIGA_MAC_VER_33:
+ case RTL_GIGA_MAC_VER_34:
+ RTL_W32(RxConfig, RTL_R32(RxConfig) |
+ AcceptBroadcast | AcceptMulticast | AcceptMyPhys);
+ break;
+ default:
+ break;
+ }
+}
+
+static bool rtl_wol_pll_power_down(struct rtl8169_private *tp)
+{
+ if (!(__rtl8169_get_wol(tp) & WAKE_ANY))
+ return false;
+
+ rtl_writephy(tp, 0x1f, 0x0000);
+ rtl_writephy(tp, MII_BMCR, 0x0000);
+
+ rtl_wol_suspend_quirk(tp);
+
+ return true;
+}
+
static void r810x_phy_power_down(struct rtl8169_private *tp)
{
rtl_writephy(tp, 0x1f, 0x0000);
@@ -3330,18 +3361,8 @@
static void r810x_pll_power_down(struct rtl8169_private *tp)
{
- void __iomem *ioaddr = tp->mmio_addr;
-
- if (__rtl8169_get_wol(tp) & WAKE_ANY) {
- rtl_writephy(tp, 0x1f, 0x0000);
- rtl_writephy(tp, MII_BMCR, 0x0000);
-
- if (tp->mac_version == RTL_GIGA_MAC_VER_29 ||
- tp->mac_version == RTL_GIGA_MAC_VER_30)
- RTL_W32(RxConfig, RTL_R32(RxConfig) | AcceptBroadcast |
- AcceptMulticast | AcceptMyPhys);
+ if (rtl_wol_pll_power_down(tp))
return;
- }
r810x_phy_power_down(tp);
}
@@ -3430,17 +3451,8 @@
tp->mac_version == RTL_GIGA_MAC_VER_33)
rtl_ephy_write(ioaddr, 0x19, 0xff64);
- if (__rtl8169_get_wol(tp) & WAKE_ANY) {
- rtl_writephy(tp, 0x1f, 0x0000);
- rtl_writephy(tp, MII_BMCR, 0x0000);
-
- if (tp->mac_version == RTL_GIGA_MAC_VER_32 ||
- tp->mac_version == RTL_GIGA_MAC_VER_33 ||
- tp->mac_version == RTL_GIGA_MAC_VER_34)
- RTL_W32(RxConfig, RTL_R32(RxConfig) | AcceptBroadcast |
- AcceptMulticast | AcceptMyPhys);
+ if (rtl_wol_pll_power_down(tp))
return;
- }
r8168_phy_power_down(tp);
@@ -5788,11 +5800,30 @@
#endif /* !CONFIG_PM */
+static void rtl_wol_shutdown_quirk(struct rtl8169_private *tp)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ /* WoL fails with 8168b when the receiver is disabled. */
+ switch (tp->mac_version) {
+ case RTL_GIGA_MAC_VER_11:
+ case RTL_GIGA_MAC_VER_12:
+ case RTL_GIGA_MAC_VER_17:
+ pci_clear_master(tp->pci_dev);
+
+ RTL_W8(ChipCmd, CmdRxEnb);
+ /* PCI commit */
+ RTL_R8(ChipCmd);
+ break;
+ default:
+ break;
+ }
+}
+
static void rtl_shutdown(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct rtl8169_private *tp = netdev_priv(dev);
- void __iomem *ioaddr = tp->mmio_addr;
rtl8169_net_suspend(dev);
@@ -5806,16 +5837,9 @@
spin_unlock_irq(&tp->lock);
if (system_state == SYSTEM_POWER_OFF) {
- /* WoL fails with 8168b when the receiver is disabled. */
- if ((tp->mac_version == RTL_GIGA_MAC_VER_11 ||
- tp->mac_version == RTL_GIGA_MAC_VER_12 ||
- tp->mac_version == RTL_GIGA_MAC_VER_17) &&
- (tp->features & RTL_FEATURE_WOL)) {
- pci_clear_master(pdev);
-
- RTL_W8(ChipCmd, CmdRxEnb);
- /* PCI commit */
- RTL_R8(ChipCmd);
+ if (__rtl8169_get_wol(tp) & WAKE_ANY) {
+ rtl_wol_suspend_quirk(tp);
+ rtl_wol_shutdown_quirk(tp);
}
pci_wake_from_d3(pdev, true);
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index b9016a3..c90ddb6 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -26,6 +26,7 @@
* LAN9215, LAN9216, LAN9217, LAN9218
* LAN9210, LAN9211
* LAN9220, LAN9221
+ * LAN89218
*
*/
@@ -1983,6 +1984,7 @@
case 0x01170000:
case 0x01160000:
case 0x01150000:
+ case 0x218A0000:
/* LAN911[5678] family */
pdata->generation = pdata->idrev & 0x0000FFFF;
break;
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 4a1374d..c11a2b8 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -15577,7 +15577,7 @@
cancel_work_sync(&tp->reset_task);
- if (!tg3_flag(tp, USE_PHYLIB)) {
+ if (tg3_flag(tp, USE_PHYLIB)) {
tg3_phy_fini(tp);
tg3_mdio_fini(tp);
}
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 3ff22e3..f7239b3 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -662,6 +662,90 @@
EXPORT_SYMBOL_GPL(of_property_read_string);
/**
+ * of_property_read_string_index - Find and read a string from a multiple
+ * strings property.
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ * @index: index of the string in the list of strings
+ * @out_string: pointer to null terminated return string, modified only if
+ * return value is 0.
+ *
+ * Search for a property in a device tree node and retrieve a null
+ * terminated string value (pointer to data, not a copy) in the list of strings
+ * contained in that property.
+ * Returns 0 on success, -EINVAL if the property does not exist, -ENODATA if
+ * property does not have a value, and -EILSEQ if the string is not
+ * null-terminated within the length of the property data.
+ *
+ * The out_string pointer is modified only if a valid string can be decoded.
+ */
+int of_property_read_string_index(struct device_node *np, const char *propname,
+ int index, const char **output)
+{
+ struct property *prop = of_find_property(np, propname, NULL);
+ int i = 0;
+ size_t l = 0, total = 0;
+ const char *p;
+
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -ENODATA;
+ if (strnlen(prop->value, prop->length) >= prop->length)
+ return -EILSEQ;
+
+ p = prop->value;
+
+ for (i = 0; total < prop->length; total += l, p += l) {
+ l = strlen(p) + 1;
+ if ((*p != 0) && (i++ == index)) {
+ *output = p;
+ return 0;
+ }
+ }
+ return -ENODATA;
+}
+EXPORT_SYMBOL_GPL(of_property_read_string_index);
+
+
+/**
+ * of_property_count_strings - Find and return the number of strings from a
+ * multiple strings property.
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ *
+ * Search for a property in a device tree node and retrieve the number of null
+ * terminated string contain in it. Returns the number of strings on
+ * success, -EINVAL if the property does not exist, -ENODATA if property
+ * does not have a value, and -EILSEQ if the string is not null-terminated
+ * within the length of the property data.
+ */
+int of_property_count_strings(struct device_node *np, const char *propname)
+{
+ struct property *prop = of_find_property(np, propname, NULL);
+ int i = 0;
+ size_t l = 0, total = 0;
+ const char *p;
+
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -ENODATA;
+ if (strnlen(prop->value, prop->length) >= prop->length)
+ return -EILSEQ;
+
+ p = prop->value;
+
+ for (i = 0; total < prop->length; total += l, p += l) {
+ l = strlen(p) + 1;
+ if (*p != 0)
+ i++;
+ }
+ return i;
+}
+EXPORT_SYMBOL_GPL(of_property_count_strings);
+
+/**
* of_parse_phandle - Resolve a phandle property to a device_node pointer
* @np: Pointer to device node holding phandle property
* @phandle_name: Name of property holding a phandle value
diff --git a/drivers/pcmcia/pxa2xx_vpac270.c b/drivers/pcmcia/pxa2xx_vpac270.c
index e956f65..66ab92c 100644
--- a/drivers/pcmcia/pxa2xx_vpac270.c
+++ b/drivers/pcmcia/pxa2xx_vpac270.c
@@ -17,7 +17,7 @@
#include <asm/mach-types.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <mach/vpac270.h>
#include "soc_common.h"
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index c9e3dc0..16ad97d 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -1769,10 +1769,12 @@
sas_disable_routing(parent, phy->attached_sas_addr);
}
memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
- sas_port_delete_phy(phy->port, phy->phy);
- if (phy->port->num_phys == 0)
- sas_port_delete(phy->port);
- phy->port = NULL;
+ if (phy->port) {
+ sas_port_delete_phy(phy->port, phy->phy);
+ if (phy->port->num_phys == 0)
+ sas_port_delete(phy->port);
+ phy->port = NULL;
+ }
}
static int sas_discover_bfs_by_root_level(struct domain_device *root,
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 4cace3f..1e69527 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1328,10 +1328,9 @@
qla2x00_sp_compl(ha, sp);
} else {
ctx = sp->ctx;
- if (ctx->type == SRB_LOGIN_CMD ||
- ctx->type == SRB_LOGOUT_CMD) {
- ctx->u.iocb_cmd->free(sp);
- } else {
+ if (ctx->type == SRB_ELS_CMD_RPT ||
+ ctx->type == SRB_ELS_CMD_HST ||
+ ctx->type == SRB_CT_CMD) {
struct fc_bsg_job *bsg_job =
ctx->u.bsg_job;
if (bsg_job->request->msgcode
@@ -1343,6 +1342,8 @@
kfree(sp->ctx);
mempool_free(sp,
ha->srb_mempool);
+ } else {
+ ctx->u.iocb_cmd->free(sp);
}
}
}
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 82dee9a..d3bff42 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -22,7 +22,7 @@
#include <asm/io.h>
#include <mach/board.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <mach/cpu.h>
/* SPI register offsets */
diff --git a/drivers/staging/octeon/ethernet-rx.c b/drivers/staging/octeon/ethernet-rx.c
index 1a7c19a..8b307b4 100644
--- a/drivers/staging/octeon/ethernet-rx.c
+++ b/drivers/staging/octeon/ethernet-rx.c
@@ -411,7 +411,8 @@
skb->protocol = eth_type_trans(skb, dev);
skb->dev = dev;
- if (unlikely(work->word2.s.not_IP || work->word2.s.IP_exc || work->word2.s.L4_error))
+ if (unlikely(work->word2.s.not_IP || work->word2.s.IP_exc ||
+ work->word2.s.L4_error || !work->word2.s.tcp_or_udp))
skb->ip_summed = CHECKSUM_NONE;
else
skb->ip_summed = CHECKSUM_UNNECESSARY;
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index b922f5d..caba673 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -46,7 +46,7 @@
#ifdef CONFIG_ARM
#include <mach/cpu.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#endif
#define PDC_BUFFER_SIZE 512
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index 58cf279..bc95f52 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -478,8 +478,10 @@
spin_unlock_irqrestore(<q_asc_lock, flags);
/* Don't rewrite B0 */
- if (tty_termios_baud_rate(new))
+ if (tty_termios_baud_rate(new))
tty_termios_encode_baud_rate(new, baud, baud);
+
+ uart_update_timeout(port, cflag, baud);
}
static const char*
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index e6ba838..7767902 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -19,6 +19,7 @@
# define SUPPORT_SYSRQ
#endif
+#include <linux/atomic.h>
#include <linux/hrtimer.h>
#include <linux/module.h>
#include <linux/io.h>
@@ -33,6 +34,8 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include "msm_serial.h"
@@ -589,9 +592,8 @@
iowrite32(GSBI_PROTOCOL_IDLE, msm_port->gsbi_base +
GSBI_CONTROL);
- gsbi_resource = platform_get_resource_byname(pdev,
- IORESOURCE_MEM,
- "gsbi_resource");
+ gsbi_resource = platform_get_resource(pdev,
+ IORESOURCE_MEM, 1);
if (unlikely(!gsbi_resource))
return;
@@ -612,8 +614,7 @@
resource_size_t size;
int ret;
- uart_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "uart_resource");
+ uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (unlikely(!uart_resource))
return -ENXIO;
@@ -628,8 +629,7 @@
goto fail_release_port;
}
- gsbi_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "gsbi_resource");
+ gsbi_resource = platform_get_resource(pdev, IORESOURCE_MEM, 1);
/* Is this a GSBI-based port? */
if (gsbi_resource) {
size = resource_size(gsbi_resource);
@@ -859,6 +859,8 @@
.cons = MSM_CONSOLE,
};
+static atomic_t msm_uart_next_id = ATOMIC_INIT(0);
+
static int __init msm_serial_probe(struct platform_device *pdev)
{
struct msm_port *msm_port;
@@ -866,6 +868,9 @@
struct uart_port *port;
int irq;
+ if (pdev->id == -1)
+ pdev->id = atomic_inc_return(&msm_uart_next_id) - 1;
+
if (unlikely(pdev->id < 0 || pdev->id >= UART_NR))
return -ENXIO;
@@ -875,7 +880,7 @@
port->dev = &pdev->dev;
msm_port = UART_TO_MSM(port);
- if (platform_get_resource_byname(pdev, IORESOURCE_MEM, "gsbi_resource"))
+ if (platform_get_resource(pdev, IORESOURCE_MEM, 1))
msm_port->is_uartdm = 1;
else
msm_port->is_uartdm = 0;
@@ -899,8 +904,7 @@
printk(KERN_INFO "uartclk = %d\n", port->uartclk);
- resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "uart_resource");
+ resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (unlikely(!resource))
return -ENXIO;
port->mapbase = resource->start;
@@ -924,11 +928,17 @@
return 0;
}
+static struct of_device_id msm_match_table[] = {
+ { .compatible = "qcom,msm-uart" },
+ {}
+};
+
static struct platform_driver msm_platform_driver = {
.remove = msm_serial_remove,
.driver = {
.name = "msm_serial",
.owner = THIS_MODULE,
+ .of_match_table = msm_match_table,
},
};
diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c
index 653d6a6..d1b4193 100644
--- a/drivers/usb/host/ohci-pnx4008.c
+++ b/drivers/usb/host/ohci-pnx4008.c
@@ -26,7 +26,7 @@
#include <mach/platform.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 8bdf25a..f9a3f62 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -35,7 +35,7 @@
#include <mach/hardware.h>
#include <mach/memory.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <mach/cputype.h>
#include <asm/mach-types.h>
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 817ab60..dda9206 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -21,7 +21,7 @@
#include <mach/board.h>
#include <mach/cpu.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <video/atmel_lcdc.h>
diff --git a/drivers/video/omap/lcd_apollon.c b/drivers/video/omap/lcd_apollon.c
index 10459d8..4b24f54 100644
--- a/drivers/video/omap/lcd_apollon.c
+++ b/drivers/video/omap/lcd_apollon.c
@@ -24,7 +24,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include "omapfb.h"
diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c
index 8df6887..622ad83 100644
--- a/drivers/video/omap/lcd_h3.c
+++ b/drivers/video/omap/lcd_h3.c
@@ -23,7 +23,7 @@
#include <linux/platform_device.h>
#include <linux/i2c/tps65010.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include "omapfb.h"
#define MODULE_NAME "omapfb-lcd_h3"
diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c
index 9fff86f..12cc52a 100644
--- a/drivers/video/omap/lcd_inn1610.c
+++ b/drivers/video/omap/lcd_inn1610.c
@@ -22,7 +22,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include "omapfb.h"
#define MODULE_NAME "omapfb-lcd_h3"
diff --git a/drivers/video/omap/lcd_ldp.c b/drivers/video/omap/lcd_ldp.c
index 0f5952c..0624664 100644
--- a/drivers/video/omap/lcd_ldp.c
+++ b/drivers/video/omap/lcd_ldp.c
@@ -26,7 +26,7 @@
#include <linux/delay.h>
#include <linux/i2c/twl.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/mux.h>
#include <asm/mach-types.h>
diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c
index b87e8b8..6f8d13c 100644
--- a/drivers/video/omap/lcd_osk.c
+++ b/drivers/video/omap/lcd_osk.c
@@ -23,7 +23,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/mux.h>
#include "omapfb.h"
diff --git a/drivers/video/omap/lcd_overo.c b/drivers/video/omap/lcd_overo.c
index 564933f..b8fd5b2 100644
--- a/drivers/video/omap/lcd_overo.c
+++ b/drivers/video/omap/lcd_overo.c
@@ -23,7 +23,7 @@
#include <linux/platform_device.h>
#include <linux/i2c/twl.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/mux.h>
#include <asm/mach-types.h>
diff --git a/drivers/video/omap/lcd_palmtt.c b/drivers/video/omap/lcd_palmtt.c
index ff0e6d7..b51b332 100644
--- a/drivers/video/omap/lcd_palmtt.c
+++ b/drivers/video/omap/lcd_palmtt.c
@@ -29,7 +29,7 @@
#include <linux/module.h>
#include <linux/io.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include "omapfb.h"
static int palmtt_panel_init(struct lcd_panel *panel,
diff --git a/drivers/video/pnx4008/sdum.c b/drivers/video/pnx4008/sdum.c
index 5ec4f2d..50e0039 100644
--- a/drivers/video/pnx4008/sdum.c
+++ b/drivers/video/pnx4008/sdum.c
@@ -30,7 +30,7 @@
#include <linux/clk.h>
#include <linux/gfp.h>
#include <asm/uaccess.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include "sdum.h"
#include "fbcommon.h"
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 538f65a..dae5dfe 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -1047,7 +1047,16 @@
if (!max_to_defrag)
max_to_defrag = last_index - 1;
- while (i <= last_index && defrag_count < max_to_defrag) {
+ /*
+ * make writeback starts from i, so the defrag range can be
+ * written sequentially.
+ */
+ if (i < inode->i_mapping->writeback_index)
+ inode->i_mapping->writeback_index = i;
+
+ while (i <= last_index && defrag_count < max_to_defrag &&
+ (i < (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >>
+ PAGE_CACHE_SHIFT)) {
/*
* make sure we stop running if someone unmounts
* the FS
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index f4af4cc..71beb02 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2018,7 +2018,7 @@
warned_on_ntlm = true;
cERROR(1, "default security mechanism requested. The default "
"security mechanism will be upgraded from ntlm to "
- "ntlmv2 in kernel release 3.1");
+ "ntlmv2 in kernel release 3.2");
}
ses->overrideSecFlg = volume_info->secFlg;
diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c
index cac2ecf..ef43fce 100644
--- a/fs/xfs/xfs_buf_item.c
+++ b/fs/xfs/xfs_buf_item.c
@@ -629,7 +629,7 @@
* the xfsbufd to get this buffer written. We have to unlock the buffer
* to allow the xfsbufd to write it, too.
*/
-STATIC void
+STATIC bool
xfs_buf_item_pushbuf(
struct xfs_log_item *lip)
{
@@ -643,6 +643,7 @@
xfs_buf_delwri_promote(bp);
xfs_buf_relse(bp);
+ return true;
}
STATIC void
diff --git a/fs/xfs/xfs_dquot_item.c b/fs/xfs/xfs_dquot_item.c
index 9e0e2fa..bb3f71d 100644
--- a/fs/xfs/xfs_dquot_item.c
+++ b/fs/xfs/xfs_dquot_item.c
@@ -183,13 +183,14 @@
* search the buffer cache can be a time consuming thing, and AIL lock is a
* spinlock.
*/
-STATIC void
+STATIC bool
xfs_qm_dquot_logitem_pushbuf(
struct xfs_log_item *lip)
{
struct xfs_dq_logitem *qlip = DQUOT_ITEM(lip);
struct xfs_dquot *dqp = qlip->qli_dquot;
struct xfs_buf *bp;
+ bool ret = true;
ASSERT(XFS_DQ_IS_LOCKED(dqp));
@@ -201,17 +202,20 @@
if (completion_done(&dqp->q_flush) ||
!(lip->li_flags & XFS_LI_IN_AIL)) {
xfs_dqunlock(dqp);
- return;
+ return true;
}
bp = xfs_incore(dqp->q_mount->m_ddev_targp, qlip->qli_format.qlf_blkno,
dqp->q_mount->m_quotainfo->qi_dqchunklen, XBF_TRYLOCK);
xfs_dqunlock(dqp);
if (!bp)
- return;
+ return true;
if (XFS_BUF_ISDELAYWRITE(bp))
xfs_buf_delwri_promote(bp);
+ if (xfs_buf_ispinned(bp))
+ ret = false;
xfs_buf_relse(bp);
+ return ret;
}
/*
diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c
index 588406d..836ad80 100644
--- a/fs/xfs/xfs_inode_item.c
+++ b/fs/xfs/xfs_inode_item.c
@@ -708,13 +708,14 @@
* marked delayed write. If that's the case, we'll promote it and that will
* allow the caller to write the buffer by triggering the xfsbufd to run.
*/
-STATIC void
+STATIC bool
xfs_inode_item_pushbuf(
struct xfs_log_item *lip)
{
struct xfs_inode_log_item *iip = INODE_ITEM(lip);
struct xfs_inode *ip = iip->ili_inode;
struct xfs_buf *bp;
+ bool ret = true;
ASSERT(xfs_isilocked(ip, XFS_ILOCK_SHARED));
@@ -725,7 +726,7 @@
if (completion_done(&ip->i_flush) ||
!(lip->li_flags & XFS_LI_IN_AIL)) {
xfs_iunlock(ip, XFS_ILOCK_SHARED);
- return;
+ return true;
}
bp = xfs_incore(ip->i_mount->m_ddev_targp, iip->ili_format.ilf_blkno,
@@ -733,10 +734,13 @@
xfs_iunlock(ip, XFS_ILOCK_SHARED);
if (!bp)
- return;
+ return true;
if (XFS_BUF_ISDELAYWRITE(bp))
xfs_buf_delwri_promote(bp);
+ if (xfs_buf_ispinned(bp))
+ ret = false;
xfs_buf_relse(bp);
+ return ret;
}
/*
diff --git a/fs/xfs/xfs_linux.h b/fs/xfs/xfs_linux.h
index 1e8a45e..828662f 100644
--- a/fs/xfs/xfs_linux.h
+++ b/fs/xfs/xfs_linux.h
@@ -68,6 +68,8 @@
#include <linux/ctype.h>
#include <linux/writeback.h>
#include <linux/capability.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
#include <linux/list_sort.h>
#include <asm/page.h>
diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c
index 2366c54..5cf06b8 100644
--- a/fs/xfs/xfs_super.c
+++ b/fs/xfs/xfs_super.c
@@ -1652,24 +1652,13 @@
*/
xfs_syncd_wq = alloc_workqueue("xfssyncd", WQ_CPU_INTENSIVE, 8);
if (!xfs_syncd_wq)
- goto out;
-
- xfs_ail_wq = alloc_workqueue("xfsail", WQ_CPU_INTENSIVE, 8);
- if (!xfs_ail_wq)
- goto out_destroy_syncd;
-
+ return -ENOMEM;
return 0;
-
-out_destroy_syncd:
- destroy_workqueue(xfs_syncd_wq);
-out:
- return -ENOMEM;
}
STATIC void
xfs_destroy_workqueues(void)
{
- destroy_workqueue(xfs_ail_wq);
destroy_workqueue(xfs_syncd_wq);
}
diff --git a/fs/xfs/xfs_trans.h b/fs/xfs/xfs_trans.h
index 06a9759..53597f4 100644
--- a/fs/xfs/xfs_trans.h
+++ b/fs/xfs/xfs_trans.h
@@ -350,7 +350,7 @@
void (*iop_unlock)(xfs_log_item_t *);
xfs_lsn_t (*iop_committed)(xfs_log_item_t *, xfs_lsn_t);
void (*iop_push)(xfs_log_item_t *);
- void (*iop_pushbuf)(xfs_log_item_t *);
+ bool (*iop_pushbuf)(xfs_log_item_t *);
void (*iop_committing)(xfs_log_item_t *, xfs_lsn_t);
} xfs_item_ops_t;
diff --git a/fs/xfs/xfs_trans_ail.c b/fs/xfs/xfs_trans_ail.c
index c15aa29..3a1e7ca 100644
--- a/fs/xfs/xfs_trans_ail.c
+++ b/fs/xfs/xfs_trans_ail.c
@@ -28,8 +28,6 @@
#include "xfs_trans_priv.h"
#include "xfs_error.h"
-struct workqueue_struct *xfs_ail_wq; /* AIL workqueue */
-
#ifdef DEBUG
/*
* Check that the list is sorted as it should be.
@@ -356,16 +354,10 @@
xfs_trans_ail_cursor_clear(ailp, lip);
}
-/*
- * xfs_ail_worker does the work of pushing on the AIL. It will requeue itself
- * to run at a later time if there is more work to do to complete the push.
- */
-STATIC void
-xfs_ail_worker(
- struct work_struct *work)
+static long
+xfsaild_push(
+ struct xfs_ail *ailp)
{
- struct xfs_ail *ailp = container_of(to_delayed_work(work),
- struct xfs_ail, xa_work);
xfs_mount_t *mp = ailp->xa_mount;
struct xfs_ail_cursor cur;
xfs_log_item_t *lip;
@@ -427,8 +419,13 @@
case XFS_ITEM_PUSHBUF:
XFS_STATS_INC(xs_push_ail_pushbuf);
- IOP_PUSHBUF(lip);
- ailp->xa_last_pushed_lsn = lsn;
+
+ if (!IOP_PUSHBUF(lip)) {
+ stuck++;
+ flush_log = 1;
+ } else {
+ ailp->xa_last_pushed_lsn = lsn;
+ }
push_xfsbufd = 1;
break;
@@ -440,7 +437,6 @@
case XFS_ITEM_LOCKED:
XFS_STATS_INC(xs_push_ail_locked);
- ailp->xa_last_pushed_lsn = lsn;
stuck++;
break;
@@ -501,20 +497,6 @@
/* We're past our target or empty, so idle */
ailp->xa_last_pushed_lsn = 0;
- /*
- * We clear the XFS_AIL_PUSHING_BIT first before checking
- * whether the target has changed. If the target has changed,
- * this pushes the requeue race directly onto the result of the
- * atomic test/set bit, so we are guaranteed that either the
- * the pusher that changed the target or ourselves will requeue
- * the work (but not both).
- */
- clear_bit(XFS_AIL_PUSHING_BIT, &ailp->xa_flags);
- smp_rmb();
- if (XFS_LSN_CMP(ailp->xa_target, target) == 0 ||
- test_and_set_bit(XFS_AIL_PUSHING_BIT, &ailp->xa_flags))
- return;
-
tout = 50;
} else if (XFS_LSN_CMP(lsn, target) >= 0) {
/*
@@ -537,9 +519,30 @@
tout = 20;
}
- /* There is more to do, requeue us. */
- queue_delayed_work(xfs_syncd_wq, &ailp->xa_work,
- msecs_to_jiffies(tout));
+ return tout;
+}
+
+static int
+xfsaild(
+ void *data)
+{
+ struct xfs_ail *ailp = data;
+ long tout = 0; /* milliseconds */
+
+ while (!kthread_should_stop()) {
+ if (tout && tout <= 20)
+ __set_current_state(TASK_KILLABLE);
+ else
+ __set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(tout ?
+ msecs_to_jiffies(tout) : MAX_SCHEDULE_TIMEOUT);
+
+ try_to_freeze();
+
+ tout = xfsaild_push(ailp);
+ }
+
+ return 0;
}
/*
@@ -574,8 +577,9 @@
*/
smp_wmb();
xfs_trans_ail_copy_lsn(ailp, &ailp->xa_target, &threshold_lsn);
- if (!test_and_set_bit(XFS_AIL_PUSHING_BIT, &ailp->xa_flags))
- queue_delayed_work(xfs_syncd_wq, &ailp->xa_work, 0);
+ smp_wmb();
+
+ wake_up_process(ailp->xa_task);
}
/*
@@ -813,9 +817,18 @@
INIT_LIST_HEAD(&ailp->xa_ail);
INIT_LIST_HEAD(&ailp->xa_cursors);
spin_lock_init(&ailp->xa_lock);
- INIT_DELAYED_WORK(&ailp->xa_work, xfs_ail_worker);
+
+ ailp->xa_task = kthread_run(xfsaild, ailp, "xfsaild/%s",
+ ailp->xa_mount->m_fsname);
+ if (IS_ERR(ailp->xa_task))
+ goto out_free_ailp;
+
mp->m_ail = ailp;
return 0;
+
+out_free_ailp:
+ kmem_free(ailp);
+ return ENOMEM;
}
void
@@ -824,6 +837,6 @@
{
struct xfs_ail *ailp = mp->m_ail;
- cancel_delayed_work_sync(&ailp->xa_work);
+ kthread_stop(ailp->xa_task);
kmem_free(ailp);
}
diff --git a/fs/xfs/xfs_trans_priv.h b/fs/xfs/xfs_trans_priv.h
index 212946b..22750b5 100644
--- a/fs/xfs/xfs_trans_priv.h
+++ b/fs/xfs/xfs_trans_priv.h
@@ -64,23 +64,17 @@
*/
struct xfs_ail {
struct xfs_mount *xa_mount;
+ struct task_struct *xa_task;
struct list_head xa_ail;
xfs_lsn_t xa_target;
struct list_head xa_cursors;
spinlock_t xa_lock;
- struct delayed_work xa_work;
xfs_lsn_t xa_last_pushed_lsn;
- unsigned long xa_flags;
};
-#define XFS_AIL_PUSHING_BIT 0
-
/*
* From xfs_trans_ail.c
*/
-
-extern struct workqueue_struct *xfs_ail_wq; /* AIL workqueue */
-
void xfs_trans_ail_update_bulk(struct xfs_ail *ailp,
struct xfs_ail_cursor *cur,
struct xfs_log_item **log_items, int nr_items,
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index 3fa1f3d..99e3e50 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -197,6 +197,11 @@
* whether or not its underlying devices have support.
*/
unsigned discards_supported:1;
+
+ /*
+ * Set if this target does not return zeroes on discarded blocks.
+ */
+ unsigned discard_zeroes_data_unsupported:1;
};
/* Each target can link one of these into the table */
diff --git a/include/linux/of.h b/include/linux/of.h
index 9180dc5..5dfe2d5 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -203,6 +203,11 @@
extern int of_property_read_string(struct device_node *np,
const char *propname,
const char **out_string);
+extern int of_property_read_string_index(struct device_node *np,
+ const char *propname,
+ int index, const char **output);
+extern int of_property_count_strings(struct device_node *np,
+ const char *propname);
extern int of_device_is_compatible(const struct device_node *device,
const char *);
extern int of_device_is_available(const struct device_node *device);
@@ -256,6 +261,19 @@
return -ENOSYS;
}
+static inline int of_property_read_string_index(struct device_node *np,
+ const char *propname, int index,
+ const char **out_string)
+{
+ return -ENOSYS;
+}
+
+static inline int of_property_count_strings(struct device_node *np,
+ const char *propname)
+{
+ return -ENOSYS;
+}
+
static inline const void *of_get_property(const struct device_node *node,
const char *name,
int *lenp)
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index 1aaf915..8fa4430 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -900,6 +900,7 @@
volatile int sync_state;
volatile int master_syncid;
volatile int backup_syncid;
+ struct mutex sync_mutex;
/* multicast interface name */
char master_mcast_ifn[IP_VS_IFNAME_MAXLEN];
char backup_mcast_ifn[IP_VS_IFNAME_MAXLEN];
diff --git a/include/net/udplite.h b/include/net/udplite.h
index 673a024..5f097ca 100644
--- a/include/net/udplite.h
+++ b/include/net/udplite.h
@@ -66,41 +66,35 @@
return 0;
}
-static inline int udplite_sender_cscov(struct udp_sock *up, struct udphdr *uh)
-{
- int cscov = up->len;
-
- /*
- * Sender has set `partial coverage' option on UDP-Lite socket
- */
- if (up->pcflag & UDPLITE_SEND_CC) {
- if (up->pcslen < up->len) {
- /* up->pcslen == 0 means that full coverage is required,
- * partial coverage only if 0 < up->pcslen < up->len */
- if (0 < up->pcslen) {
- cscov = up->pcslen;
- }
- uh->len = htons(up->pcslen);
- }
- /*
- * NOTE: Causes for the error case `up->pcslen > up->len':
- * (i) Application error (will not be penalized).
- * (ii) Payload too big for send buffer: data is split
- * into several packets, each with its own header.
- * In this case (e.g. last segment), coverage may
- * exceed packet length.
- * Since packets with coverage length > packet length are
- * illegal, we fall back to the defaults here.
- */
- }
- return cscov;
-}
-
+/* Slow-path computation of checksum. Socket is locked. */
static inline __wsum udplite_csum_outgoing(struct sock *sk, struct sk_buff *skb)
{
- int cscov = udplite_sender_cscov(udp_sk(sk), udp_hdr(skb));
+ const struct udp_sock *up = udp_sk(skb->sk);
+ int cscov = up->len;
__wsum csum = 0;
+ if (up->pcflag & UDPLITE_SEND_CC) {
+ /*
+ * Sender has set `partial coverage' option on UDP-Lite socket.
+ * The special case "up->pcslen == 0" signifies full coverage.
+ */
+ if (up->pcslen < up->len) {
+ if (0 < up->pcslen)
+ cscov = up->pcslen;
+ udp_hdr(skb)->len = htons(up->pcslen);
+ }
+ /*
+ * NOTE: Causes for the error case `up->pcslen > up->len':
+ * (i) Application error (will not be penalized).
+ * (ii) Payload too big for send buffer: data is split
+ * into several packets, each with its own header.
+ * In this case (e.g. last segment), coverage may
+ * exceed packet length.
+ * Since packets with coverage length > packet length are
+ * illegal, we fall back to the defaults here.
+ */
+ }
+
skb->ip_summed = CHECKSUM_NONE; /* no HW support for checksumming */
skb_queue_walk(&sk->sk_write_queue, skb) {
@@ -115,16 +109,21 @@
return csum;
}
+/* Fast-path computation of checksum. Socket may not be locked. */
static inline __wsum udplite_csum(struct sk_buff *skb)
{
- struct sock *sk = skb->sk;
- int cscov = udplite_sender_cscov(udp_sk(sk), udp_hdr(skb));
+ const struct udp_sock *up = udp_sk(skb->sk);
const int off = skb_transport_offset(skb);
- const int len = skb->len - off;
+ int len = skb->len - off;
+ if ((up->pcflag & UDPLITE_SEND_CC) && up->pcslen < len) {
+ if (0 < up->pcslen)
+ len = up->pcslen;
+ udp_hdr(skb)->len = htons(up->pcslen);
+ }
skb->ip_summed = CHECKSUM_NONE; /* no HW support for checksumming */
- return skb_checksum(skb, off, min(cscov, len), 0);
+ return skb_checksum(skb, off, len, 0);
}
extern void udplite4_register(void);
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index c8008dd..640ded8 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -274,9 +274,7 @@
struct task_cputime sum;
unsigned long flags;
- spin_lock_irqsave(&cputimer->lock, flags);
if (!cputimer->running) {
- cputimer->running = 1;
/*
* The POSIX timer interface allows for absolute time expiry
* values through the TIMER_ABSTIME flag, therefore we have
@@ -284,8 +282,11 @@
* it.
*/
thread_group_cputime(tsk, &sum);
+ spin_lock_irqsave(&cputimer->lock, flags);
+ cputimer->running = 1;
update_gt_cputime(&cputimer->cputime, &sum);
- }
+ } else
+ spin_lock_irqsave(&cputimer->lock, flags);
*times = cputimer->cputime;
spin_unlock_irqrestore(&cputimer->lock, flags);
}
diff --git a/kernel/sys.c b/kernel/sys.c
index 18ee1d2..1dbbe69 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1172,7 +1172,7 @@
static int override_release(char __user *release, int len)
{
int ret = 0;
- char buf[len];
+ char buf[65];
if (current->personality & UNAME26) {
char *rest = UTS_RELEASE;
diff --git a/mm/migrate.c b/mm/migrate.c
index 666e4e6..14d0a6a 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -120,10 +120,10 @@
ptep = pte_offset_map(pmd, addr);
- if (!is_swap_pte(*ptep)) {
- pte_unmap(ptep);
- goto out;
- }
+ /*
+ * Peek to check is_swap_pte() before taking ptlock? No, we
+ * can race mremap's move_ptes(), which skips anon_vma lock.
+ */
ptl = pte_lockptr(mm, pmd);
}
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 61f1f62..e829236 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -26,6 +26,8 @@
/* Bluetooth L2CAP sockets. */
+#include <linux/security.h>
+
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include <net/bluetooth/l2cap.h>
@@ -933,6 +935,8 @@
chan->force_reliable = pchan->force_reliable;
chan->flushable = pchan->flushable;
chan->force_active = pchan->force_active;
+
+ security_sk_clone(parent, sk);
} else {
switch (sk->sk_type) {
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 482722b..5417f61 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -42,6 +42,7 @@
#include <linux/device.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
+#include <linux/security.h>
#include <net/sock.h>
#include <asm/system.h>
@@ -264,6 +265,8 @@
pi->sec_level = rfcomm_pi(parent)->sec_level;
pi->role_switch = rfcomm_pi(parent)->role_switch;
+
+ security_sk_clone(parent, sk);
} else {
pi->dlc->defer_setup = 0;
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 8270f05..a324b00 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -41,6 +41,7 @@
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/list.h>
+#include <linux/security.h>
#include <net/sock.h>
#include <asm/system.h>
@@ -403,8 +404,10 @@
{
BT_DBG("sk %p", sk);
- if (parent)
+ if (parent) {
sk->sk_type = parent->sk_type;
+ security_sk_clone(parent, sk);
+ }
}
static struct proto sco_proto = {
diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index 32b8f9f..ff3ed60 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -91,7 +91,6 @@
{
struct net_bridge *br = netdev_priv(dev);
- netif_carrier_off(dev);
netdev_update_features(dev);
netif_start_queue(dev);
br_stp_enable_bridge(br);
@@ -108,8 +107,6 @@
{
struct net_bridge *br = netdev_priv(dev);
- netif_carrier_off(dev);
-
br_stp_disable_bridge(br);
br_multicast_stop(br);
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index e738154..1d420f6 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -161,9 +161,10 @@
call_rcu(&p->rcu, destroy_nbp_rcu);
}
-/* called with RTNL */
-static void del_br(struct net_bridge *br, struct list_head *head)
+/* Delete bridge device */
+void br_dev_delete(struct net_device *dev, struct list_head *head)
{
+ struct net_bridge *br = netdev_priv(dev);
struct net_bridge_port *p, *n;
list_for_each_entry_safe(p, n, &br->port_list, list) {
@@ -268,7 +269,7 @@
}
else
- del_br(netdev_priv(dev), NULL);
+ br_dev_delete(dev, NULL);
rtnl_unlock();
return ret;
@@ -449,7 +450,7 @@
rtnl_lock();
for_each_netdev(net, dev)
if (dev->priv_flags & IFF_EBRIDGE)
- del_br(netdev_priv(dev), &list);
+ br_dev_delete(dev, &list);
unregister_netdevice_many(&list);
rtnl_unlock();
diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c
index 5b1ed1b..e5f9ece3 100644
--- a/net/bridge/br_netlink.c
+++ b/net/bridge/br_netlink.c
@@ -210,6 +210,7 @@
.priv_size = sizeof(struct net_bridge),
.setup = br_dev_setup,
.validate = br_validate,
+ .dellink = br_dev_delete,
};
int __init br_netlink_init(void)
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index 78cc364..857a021 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -294,6 +294,7 @@
/* br_device.c */
extern void br_dev_setup(struct net_device *dev);
+extern void br_dev_delete(struct net_device *dev, struct list_head *list);
extern netdev_tx_t br_dev_xmit(struct sk_buff *skb,
struct net_device *dev);
#ifdef CONFIG_NET_POLL_CONTROLLER
diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c
index 3231b46..27071ee 100644
--- a/net/core/fib_rules.c
+++ b/net/core/fib_rules.c
@@ -475,8 +475,11 @@
list_del_rcu(&rule->list);
- if (rule->action == FR_ACT_GOTO)
+ if (rule->action == FR_ACT_GOTO) {
ops->nr_goto_rules--;
+ if (rtnl_dereference(rule->ctarget) == NULL)
+ ops->unresolved_rules--;
+ }
/*
* Check if this rule is a target to any of them. If so,
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 21fab3e..d73aab3 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1389,9 +1389,7 @@
BUG_ON(!pcount);
- /* Tweak before seqno plays */
- if (!tcp_is_fack(tp) && tcp_is_sack(tp) && tp->lost_skb_hint &&
- !before(TCP_SKB_CB(tp->lost_skb_hint)->seq, TCP_SKB_CB(skb)->seq))
+ if (skb == tp->lost_skb_hint)
tp->lost_cnt_hint += pcount;
TCP_SKB_CB(prev)->end_seq += shifted;
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index c34f015..7963e03 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -927,18 +927,21 @@
}
sk_nocaps_add(sk, NETIF_F_GSO_MASK);
}
- if (tcp_alloc_md5sig_pool(sk) == NULL) {
+
+ md5sig = tp->md5sig_info;
+ if (md5sig->entries4 == 0 &&
+ tcp_alloc_md5sig_pool(sk) == NULL) {
kfree(newkey);
return -ENOMEM;
}
- md5sig = tp->md5sig_info;
if (md5sig->alloced4 == md5sig->entries4) {
keys = kmalloc((sizeof(*keys) *
(md5sig->entries4 + 1)), GFP_ATOMIC);
if (!keys) {
kfree(newkey);
- tcp_free_md5sig_pool();
+ if (md5sig->entries4 == 0)
+ tcp_free_md5sig_pool();
return -ENOMEM;
}
@@ -982,6 +985,7 @@
kfree(tp->md5sig_info->keys4);
tp->md5sig_info->keys4 = NULL;
tp->md5sig_info->alloced4 = 0;
+ tcp_free_md5sig_pool();
} else if (tp->md5sig_info->entries4 != i) {
/* Need to do some manipulation */
memmove(&tp->md5sig_info->keys4[i],
@@ -989,7 +993,6 @@
(tp->md5sig_info->entries4 - i) *
sizeof(struct tcp4_md5sig_key));
}
- tcp_free_md5sig_pool();
return 0;
}
}
diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index d2fe4e0..0ce3d06 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -328,6 +328,7 @@
struct tcp_timewait_sock *tcptw = tcp_twsk((struct sock *)tw);
const int rto = (icsk->icsk_rto << 2) - (icsk->icsk_rto >> 1);
+ tw->tw_transparent = inet_sk(sk)->transparent;
tw->tw_rcv_wscale = tp->rx_opt.rcv_wscale;
tcptw->tw_rcv_nxt = tp->rcv_nxt;
tcptw->tw_snd_nxt = tp->snd_nxt;
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 3b5669a..d27c797 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -875,6 +875,7 @@
skb_reset_transport_header(skb);
__skb_push(skb, skb_gro_offset(skb));
+ ops = rcu_dereference(inet6_protos[proto]);
if (!ops || !ops->gro_receive)
goto out_unlock;
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 79cc646..7b8fc57 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -591,7 +591,8 @@
}
sk_nocaps_add(sk, NETIF_F_GSO_MASK);
}
- if (tcp_alloc_md5sig_pool(sk) == NULL) {
+ if (tp->md5sig_info->entries6 == 0 &&
+ tcp_alloc_md5sig_pool(sk) == NULL) {
kfree(newkey);
return -ENOMEM;
}
@@ -600,8 +601,9 @@
(tp->md5sig_info->entries6 + 1)), GFP_ATOMIC);
if (!keys) {
- tcp_free_md5sig_pool();
kfree(newkey);
+ if (tp->md5sig_info->entries6 == 0)
+ tcp_free_md5sig_pool();
return -ENOMEM;
}
@@ -647,6 +649,7 @@
kfree(tp->md5sig_info->keys6);
tp->md5sig_info->keys6 = NULL;
tp->md5sig_info->alloced6 = 0;
+ tcp_free_md5sig_pool();
} else {
/* shrink the database */
if (tp->md5sig_info->entries6 != i)
@@ -655,7 +658,6 @@
(tp->md5sig_info->entries6 - i)
* sizeof (tp->md5sig_info->keys6[0]));
}
- tcp_free_md5sig_pool();
return 0;
}
}
diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c
index ad4ac26..34b2dde 100644
--- a/net/l2tp/l2tp_core.c
+++ b/net/l2tp/l2tp_core.c
@@ -1045,8 +1045,10 @@
headroom = NET_SKB_PAD + sizeof(struct iphdr) +
uhlen + hdr_len;
old_headroom = skb_headroom(skb);
- if (skb_cow_head(skb, headroom))
+ if (skb_cow_head(skb, headroom)) {
+ dev_kfree_skb(skb);
goto abort;
+ }
new_headroom = skb_headroom(skb);
skb_orphan(skb);
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 2b771dc..e3be48b 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -2283,6 +2283,7 @@
struct ip_vs_service *svc;
struct ip_vs_dest_user *udest_compat;
struct ip_vs_dest_user_kern udest;
+ struct netns_ipvs *ipvs = net_ipvs(net);
if (!capable(CAP_NET_ADMIN))
return -EPERM;
@@ -2303,6 +2304,24 @@
/* increase the module use count */
ip_vs_use_count_inc();
+ /* Handle daemons since they have another lock */
+ if (cmd == IP_VS_SO_SET_STARTDAEMON ||
+ cmd == IP_VS_SO_SET_STOPDAEMON) {
+ struct ip_vs_daemon_user *dm = (struct ip_vs_daemon_user *)arg;
+
+ if (mutex_lock_interruptible(&ipvs->sync_mutex)) {
+ ret = -ERESTARTSYS;
+ goto out_dec;
+ }
+ if (cmd == IP_VS_SO_SET_STARTDAEMON)
+ ret = start_sync_thread(net, dm->state, dm->mcast_ifn,
+ dm->syncid);
+ else
+ ret = stop_sync_thread(net, dm->state);
+ mutex_unlock(&ipvs->sync_mutex);
+ goto out_dec;
+ }
+
if (mutex_lock_interruptible(&__ip_vs_mutex)) {
ret = -ERESTARTSYS;
goto out_dec;
@@ -2316,15 +2335,6 @@
/* Set timeout values for (tcp tcpfin udp) */
ret = ip_vs_set_timeout(net, (struct ip_vs_timeout_user *)arg);
goto out_unlock;
- } else if (cmd == IP_VS_SO_SET_STARTDAEMON) {
- struct ip_vs_daemon_user *dm = (struct ip_vs_daemon_user *)arg;
- ret = start_sync_thread(net, dm->state, dm->mcast_ifn,
- dm->syncid);
- goto out_unlock;
- } else if (cmd == IP_VS_SO_SET_STOPDAEMON) {
- struct ip_vs_daemon_user *dm = (struct ip_vs_daemon_user *)arg;
- ret = stop_sync_thread(net, dm->state);
- goto out_unlock;
}
usvc_compat = (struct ip_vs_service_user *)arg;
@@ -2584,6 +2594,33 @@
if (copy_from_user(arg, user, copylen) != 0)
return -EFAULT;
+ /*
+ * Handle daemons first since it has its own locking
+ */
+ if (cmd == IP_VS_SO_GET_DAEMON) {
+ struct ip_vs_daemon_user d[2];
+
+ memset(&d, 0, sizeof(d));
+ if (mutex_lock_interruptible(&ipvs->sync_mutex))
+ return -ERESTARTSYS;
+
+ if (ipvs->sync_state & IP_VS_STATE_MASTER) {
+ d[0].state = IP_VS_STATE_MASTER;
+ strlcpy(d[0].mcast_ifn, ipvs->master_mcast_ifn,
+ sizeof(d[0].mcast_ifn));
+ d[0].syncid = ipvs->master_syncid;
+ }
+ if (ipvs->sync_state & IP_VS_STATE_BACKUP) {
+ d[1].state = IP_VS_STATE_BACKUP;
+ strlcpy(d[1].mcast_ifn, ipvs->backup_mcast_ifn,
+ sizeof(d[1].mcast_ifn));
+ d[1].syncid = ipvs->backup_syncid;
+ }
+ if (copy_to_user(user, &d, sizeof(d)) != 0)
+ ret = -EFAULT;
+ mutex_unlock(&ipvs->sync_mutex);
+ return ret;
+ }
if (mutex_lock_interruptible(&__ip_vs_mutex))
return -ERESTARTSYS;
@@ -2681,28 +2718,6 @@
}
break;
- case IP_VS_SO_GET_DAEMON:
- {
- struct ip_vs_daemon_user d[2];
-
- memset(&d, 0, sizeof(d));
- if (ipvs->sync_state & IP_VS_STATE_MASTER) {
- d[0].state = IP_VS_STATE_MASTER;
- strlcpy(d[0].mcast_ifn, ipvs->master_mcast_ifn,
- sizeof(d[0].mcast_ifn));
- d[0].syncid = ipvs->master_syncid;
- }
- if (ipvs->sync_state & IP_VS_STATE_BACKUP) {
- d[1].state = IP_VS_STATE_BACKUP;
- strlcpy(d[1].mcast_ifn, ipvs->backup_mcast_ifn,
- sizeof(d[1].mcast_ifn));
- d[1].syncid = ipvs->backup_syncid;
- }
- if (copy_to_user(user, &d, sizeof(d)) != 0)
- ret = -EFAULT;
- }
- break;
-
default:
ret = -EINVAL;
}
@@ -3205,7 +3220,7 @@
struct net *net = skb_sknet(skb);
struct netns_ipvs *ipvs = net_ipvs(net);
- mutex_lock(&__ip_vs_mutex);
+ mutex_lock(&ipvs->sync_mutex);
if ((ipvs->sync_state & IP_VS_STATE_MASTER) && !cb->args[0]) {
if (ip_vs_genl_dump_daemon(skb, IP_VS_STATE_MASTER,
ipvs->master_mcast_ifn,
@@ -3225,7 +3240,7 @@
}
nla_put_failure:
- mutex_unlock(&__ip_vs_mutex);
+ mutex_unlock(&ipvs->sync_mutex);
return skb->len;
}
@@ -3271,6 +3286,38 @@
return ip_vs_set_timeout(net, &t);
}
+static int ip_vs_genl_set_daemon(struct sk_buff *skb, struct genl_info *info)
+{
+ int ret = 0, cmd;
+ struct net *net;
+ struct netns_ipvs *ipvs;
+
+ net = skb_sknet(skb);
+ ipvs = net_ipvs(net);
+ cmd = info->genlhdr->cmd;
+
+ if (cmd == IPVS_CMD_NEW_DAEMON || cmd == IPVS_CMD_DEL_DAEMON) {
+ struct nlattr *daemon_attrs[IPVS_DAEMON_ATTR_MAX + 1];
+
+ mutex_lock(&ipvs->sync_mutex);
+ if (!info->attrs[IPVS_CMD_ATTR_DAEMON] ||
+ nla_parse_nested(daemon_attrs, IPVS_DAEMON_ATTR_MAX,
+ info->attrs[IPVS_CMD_ATTR_DAEMON],
+ ip_vs_daemon_policy)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (cmd == IPVS_CMD_NEW_DAEMON)
+ ret = ip_vs_genl_new_daemon(net, daemon_attrs);
+ else
+ ret = ip_vs_genl_del_daemon(net, daemon_attrs);
+out:
+ mutex_unlock(&ipvs->sync_mutex);
+ }
+ return ret;
+}
+
static int ip_vs_genl_set_cmd(struct sk_buff *skb, struct genl_info *info)
{
struct ip_vs_service *svc = NULL;
@@ -3293,24 +3340,6 @@
} else if (cmd == IPVS_CMD_SET_CONFIG) {
ret = ip_vs_genl_set_config(net, info->attrs);
goto out;
- } else if (cmd == IPVS_CMD_NEW_DAEMON ||
- cmd == IPVS_CMD_DEL_DAEMON) {
-
- struct nlattr *daemon_attrs[IPVS_DAEMON_ATTR_MAX + 1];
-
- if (!info->attrs[IPVS_CMD_ATTR_DAEMON] ||
- nla_parse_nested(daemon_attrs, IPVS_DAEMON_ATTR_MAX,
- info->attrs[IPVS_CMD_ATTR_DAEMON],
- ip_vs_daemon_policy)) {
- ret = -EINVAL;
- goto out;
- }
-
- if (cmd == IPVS_CMD_NEW_DAEMON)
- ret = ip_vs_genl_new_daemon(net, daemon_attrs);
- else
- ret = ip_vs_genl_del_daemon(net, daemon_attrs);
- goto out;
} else if (cmd == IPVS_CMD_ZERO &&
!info->attrs[IPVS_CMD_ATTR_SERVICE]) {
ret = ip_vs_zero_all(net);
@@ -3536,13 +3565,13 @@
.cmd = IPVS_CMD_NEW_DAEMON,
.flags = GENL_ADMIN_PERM,
.policy = ip_vs_cmd_policy,
- .doit = ip_vs_genl_set_cmd,
+ .doit = ip_vs_genl_set_daemon,
},
{
.cmd = IPVS_CMD_DEL_DAEMON,
.flags = GENL_ADMIN_PERM,
.policy = ip_vs_cmd_policy,
- .doit = ip_vs_genl_set_cmd,
+ .doit = ip_vs_genl_set_daemon,
},
{
.cmd = IPVS_CMD_GET_DAEMON,
@@ -3679,7 +3708,7 @@
int idx;
struct netns_ipvs *ipvs = net_ipvs(net);
- ipvs->rs_lock = __RW_LOCK_UNLOCKED(ipvs->rs_lock);
+ rwlock_init(&ipvs->rs_lock);
/* Initialize rs_table */
for (idx = 0; idx < IP_VS_RTAB_SIZE; idx++)
diff --git a/net/netfilter/ipvs/ip_vs_sync.c b/net/netfilter/ipvs/ip_vs_sync.c
index 7ee7215..3cdd479 100644
--- a/net/netfilter/ipvs/ip_vs_sync.c
+++ b/net/netfilter/ipvs/ip_vs_sync.c
@@ -61,6 +61,7 @@
#define SYNC_PROTO_VER 1 /* Protocol version in header */
+static struct lock_class_key __ipvs_sync_key;
/*
* IPVS sync connection entry
* Version 0, i.e. original version.
@@ -1545,6 +1546,7 @@
IP_VS_DBG(7, "Each ip_vs_sync_conn entry needs %Zd bytes\n",
sizeof(struct ip_vs_sync_conn_v0));
+
if (state == IP_VS_STATE_MASTER) {
if (ipvs->master_thread)
return -EEXIST;
@@ -1667,6 +1669,7 @@
{
struct netns_ipvs *ipvs = net_ipvs(net);
+ __mutex_init(&ipvs->sync_mutex, "ipvs->sync_mutex", &__ipvs_sync_key);
INIT_LIST_HEAD(&ipvs->sync_queue);
spin_lock_init(&ipvs->sync_lock);
spin_lock_init(&ipvs->sync_buff_lock);
@@ -1680,7 +1683,9 @@
void ip_vs_sync_net_cleanup(struct net *net)
{
int retc;
+ struct netns_ipvs *ipvs = net_ipvs(net);
+ mutex_lock(&ipvs->sync_mutex);
retc = stop_sync_thread(net, IP_VS_STATE_MASTER);
if (retc && retc != -ESRCH)
pr_err("Failed to stop Master Daemon\n");
@@ -1688,4 +1693,5 @@
retc = stop_sync_thread(net, IP_VS_STATE_BACKUP);
if (retc && retc != -ESRCH)
pr_err("Failed to stop Backup Daemon\n");
+ mutex_unlock(&ipvs->sync_mutex);
}
diff --git a/net/netfilter/nf_conntrack_proto_gre.c b/net/netfilter/nf_conntrack_proto_gre.c
index cf616e5..d69facd 100644
--- a/net/netfilter/nf_conntrack_proto_gre.c
+++ b/net/netfilter/nf_conntrack_proto_gre.c
@@ -241,8 +241,8 @@
nf_ct_refresh_acct(ct, ctinfo, skb,
ct->proto.gre.stream_timeout);
/* Also, more likely to be important, and not a probe. */
- set_bit(IPS_ASSURED_BIT, &ct->status);
- nf_conntrack_event_cache(IPCT_ASSURED, ct);
+ if (!test_and_set_bit(IPS_ASSURED_BIT, &ct->status))
+ nf_conntrack_event_cache(IPCT_ASSURED, ct);
} else
nf_ct_refresh_acct(ct, ctinfo, skb,
ct->proto.gre.timeout);
diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c
index d306154..5f03e4e 100644
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -91,7 +91,7 @@
int needed;
int rc;
- if (skb->len < 1) {
+ if (!pskb_may_pull(skb, 1)) {
/* packet has no address block */
rc = 0;
goto empty;
@@ -100,7 +100,7 @@
len = *skb->data;
needed = 1 + (len >> 4) + (len & 0x0f);
- if (skb->len < needed) {
+ if (!pskb_may_pull(skb, needed)) {
/* packet is too short to hold the addresses it claims
to hold */
rc = -1;
@@ -295,7 +295,8 @@
* Found a listening socket, now check the incoming
* call user data vs this sockets call user data
*/
- if(skb->len > 0 && x25_sk(s)->cudmatchlength > 0) {
+ if (x25_sk(s)->cudmatchlength > 0 &&
+ skb->len >= x25_sk(s)->cudmatchlength) {
if((memcmp(x25_sk(s)->calluserdata.cuddata,
skb->data,
x25_sk(s)->cudmatchlength)) == 0) {
@@ -951,14 +952,27 @@
*
* Facilities length is mandatory in call request packets
*/
- if (skb->len < 1)
+ if (!pskb_may_pull(skb, 1))
goto out_clear_request;
len = skb->data[0] + 1;
- if (skb->len < len)
+ if (!pskb_may_pull(skb, len))
goto out_clear_request;
skb_pull(skb,len);
/*
+ * Ensure that the amount of call user data is valid.
+ */
+ if (skb->len > X25_MAX_CUD_LEN)
+ goto out_clear_request;
+
+ /*
+ * Get all the call user data so it can be used in
+ * x25_find_listener and skb_copy_from_linear_data up ahead.
+ */
+ if (!pskb_may_pull(skb, skb->len))
+ goto out_clear_request;
+
+ /*
* Find a listener for the particular address/cud pair.
*/
sk = x25_find_listener(&source_addr,skb);
@@ -1166,6 +1180,9 @@
* byte of the user data is the logical value of the Q Bit.
*/
if (test_bit(X25_Q_BIT_FLAG, &x25->flags)) {
+ if (!pskb_may_pull(skb, 1))
+ goto out_kfree_skb;
+
qbit = skb->data[0];
skb_pull(skb, 1);
}
@@ -1244,7 +1261,9 @@
struct x25_sock *x25 = x25_sk(sk);
struct sockaddr_x25 *sx25 = (struct sockaddr_x25 *)msg->msg_name;
size_t copied;
- int qbit;
+ int qbit, header_len = x25->neighbour->extended ?
+ X25_EXT_MIN_LEN : X25_STD_MIN_LEN;
+
struct sk_buff *skb;
unsigned char *asmptr;
int rc = -ENOTCONN;
@@ -1265,6 +1284,9 @@
skb = skb_dequeue(&x25->interrupt_in_queue);
+ if (!pskb_may_pull(skb, X25_STD_MIN_LEN))
+ goto out_free_dgram;
+
skb_pull(skb, X25_STD_MIN_LEN);
/*
@@ -1285,10 +1307,12 @@
if (!skb)
goto out;
+ if (!pskb_may_pull(skb, header_len))
+ goto out_free_dgram;
+
qbit = (skb->data[0] & X25_Q_BIT) == X25_Q_BIT;
- skb_pull(skb, x25->neighbour->extended ?
- X25_EXT_MIN_LEN : X25_STD_MIN_LEN);
+ skb_pull(skb, header_len);
if (test_bit(X25_Q_BIT_FLAG, &x25->flags)) {
asmptr = skb_push(skb, 1);
diff --git a/net/x25/x25_dev.c b/net/x25/x25_dev.c
index e547ca1..fa2b418 100644
--- a/net/x25/x25_dev.c
+++ b/net/x25/x25_dev.c
@@ -32,6 +32,9 @@
unsigned short frametype;
unsigned int lci;
+ if (!pskb_may_pull(skb, X25_STD_MIN_LEN))
+ return 0;
+
frametype = skb->data[2];
lci = ((skb->data[0] << 8) & 0xF00) + ((skb->data[1] << 0) & 0x0FF);
@@ -115,6 +118,9 @@
goto drop;
}
+ if (!pskb_may_pull(skb, 1))
+ return 0;
+
switch (skb->data[0]) {
case X25_IFACE_DATA:
diff --git a/net/x25/x25_facilities.c b/net/x25/x25_facilities.c
index f77e4e7..36384a1 100644
--- a/net/x25/x25_facilities.c
+++ b/net/x25/x25_facilities.c
@@ -44,7 +44,7 @@
int x25_parse_facilities(struct sk_buff *skb, struct x25_facilities *facilities,
struct x25_dte_facilities *dte_facs, unsigned long *vc_fac_mask)
{
- unsigned char *p = skb->data;
+ unsigned char *p;
unsigned int len;
*vc_fac_mask = 0;
@@ -60,14 +60,16 @@
memset(dte_facs->called_ae, '\0', sizeof(dte_facs->called_ae));
memset(dte_facs->calling_ae, '\0', sizeof(dte_facs->calling_ae));
- if (skb->len < 1)
+ if (!pskb_may_pull(skb, 1))
return 0;
- len = *p++;
+ len = skb->data[0];
- if (len >= skb->len)
+ if (!pskb_may_pull(skb, 1 + len))
return -1;
+ p = skb->data + 1;
+
while (len > 0) {
switch (*p & X25_FAC_CLASS_MASK) {
case X25_FAC_CLASS_A:
diff --git a/net/x25/x25_in.c b/net/x25/x25_in.c
index 0b073b5..a49cd4e 100644
--- a/net/x25/x25_in.c
+++ b/net/x25/x25_in.c
@@ -107,6 +107,8 @@
/*
* Parse the data in the frame.
*/
+ if (!pskb_may_pull(skb, X25_STD_MIN_LEN))
+ goto out_clear;
skb_pull(skb, X25_STD_MIN_LEN);
len = x25_parse_address_block(skb, &source_addr,
@@ -127,9 +129,11 @@
* Copy any Call User Data.
*/
if (skb->len > 0) {
- skb_copy_from_linear_data(skb,
- x25->calluserdata.cuddata,
- skb->len);
+ if (skb->len > X25_MAX_CUD_LEN)
+ goto out_clear;
+
+ skb_copy_bits(skb, 0, x25->calluserdata.cuddata,
+ skb->len);
x25->calluserdata.cudlength = skb->len;
}
if (!sock_flag(sk, SOCK_DEAD))
@@ -137,6 +141,9 @@
break;
}
case X25_CLEAR_REQUEST:
+ if (!pskb_may_pull(skb, X25_STD_MIN_LEN + 2))
+ goto out_clear;
+
x25_write_internal(sk, X25_CLEAR_CONFIRMATION);
x25_disconnect(sk, ECONNREFUSED, skb->data[3], skb->data[4]);
break;
@@ -164,6 +171,9 @@
switch (frametype) {
case X25_CLEAR_REQUEST:
+ if (!pskb_may_pull(skb, X25_STD_MIN_LEN + 2))
+ goto out_clear;
+
x25_write_internal(sk, X25_CLEAR_CONFIRMATION);
x25_disconnect(sk, 0, skb->data[3], skb->data[4]);
break;
@@ -177,6 +187,11 @@
}
return 0;
+
+out_clear:
+ x25_write_internal(sk, X25_CLEAR_REQUEST);
+ x25_start_t23timer(sk);
+ return 0;
}
/*
@@ -206,6 +221,9 @@
break;
case X25_CLEAR_REQUEST:
+ if (!pskb_may_pull(skb, X25_STD_MIN_LEN + 2))
+ goto out_clear;
+
x25_write_internal(sk, X25_CLEAR_CONFIRMATION);
x25_disconnect(sk, 0, skb->data[3], skb->data[4]);
break;
@@ -304,6 +322,12 @@
}
return queued;
+
+out_clear:
+ x25_write_internal(sk, X25_CLEAR_REQUEST);
+ x25->state = X25_STATE_2;
+ x25_start_t23timer(sk);
+ return 0;
}
/*
@@ -313,13 +337,13 @@
*/
static int x25_state4_machine(struct sock *sk, struct sk_buff *skb, int frametype)
{
+ struct x25_sock *x25 = x25_sk(sk);
+
switch (frametype) {
case X25_RESET_REQUEST:
x25_write_internal(sk, X25_RESET_CONFIRMATION);
case X25_RESET_CONFIRMATION: {
- struct x25_sock *x25 = x25_sk(sk);
-
x25_stop_timer(sk);
x25->condition = 0x00;
x25->va = 0;
@@ -331,6 +355,9 @@
break;
}
case X25_CLEAR_REQUEST:
+ if (!pskb_may_pull(skb, X25_STD_MIN_LEN + 2))
+ goto out_clear;
+
x25_write_internal(sk, X25_CLEAR_CONFIRMATION);
x25_disconnect(sk, 0, skb->data[3], skb->data[4]);
break;
@@ -340,6 +367,12 @@
}
return 0;
+
+out_clear:
+ x25_write_internal(sk, X25_CLEAR_REQUEST);
+ x25->state = X25_STATE_2;
+ x25_start_t23timer(sk);
+ return 0;
}
/* Higher level upcall for a LAPB frame */
diff --git a/net/x25/x25_link.c b/net/x25/x25_link.c
index 037958f..4acacf3 100644
--- a/net/x25/x25_link.c
+++ b/net/x25/x25_link.c
@@ -90,6 +90,9 @@
break;
case X25_DIAGNOSTIC:
+ if (!pskb_may_pull(skb, X25_STD_MIN_LEN + 4))
+ break;
+
printk(KERN_WARNING "x25: diagnostic #%d - %02X %02X %02X\n",
skb->data[3], skb->data[4],
skb->data[5], skb->data[6]);
diff --git a/net/x25/x25_subr.c b/net/x25/x25_subr.c
index 24a342e..5170d52 100644
--- a/net/x25/x25_subr.c
+++ b/net/x25/x25_subr.c
@@ -269,7 +269,11 @@
int *d, int *m)
{
struct x25_sock *x25 = x25_sk(sk);
- unsigned char *frame = skb->data;
+ unsigned char *frame;
+
+ if (!pskb_may_pull(skb, X25_STD_MIN_LEN))
+ return X25_ILLEGAL;
+ frame = skb->data;
*ns = *nr = *q = *d = *m = 0;
@@ -294,6 +298,10 @@
if (frame[2] == X25_RR ||
frame[2] == X25_RNR ||
frame[2] == X25_REJ) {
+ if (!pskb_may_pull(skb, X25_EXT_MIN_LEN))
+ return X25_ILLEGAL;
+ frame = skb->data;
+
*nr = (frame[3] >> 1) & 0x7F;
return frame[2];
}
@@ -308,6 +316,10 @@
if (x25->neighbour->extended) {
if ((frame[2] & 0x01) == X25_DATA) {
+ if (!pskb_may_pull(skb, X25_EXT_MIN_LEN))
+ return X25_ILLEGAL;
+ frame = skb->data;
+
*q = (frame[0] & X25_Q_BIT) == X25_Q_BIT;
*d = (frame[0] & X25_D_BIT) == X25_D_BIT;
*m = (frame[3] & X25_EXT_M_BIT) == X25_EXT_M_BIT;
diff --git a/security/security.c b/security/security.c
index 0e4fccf..d9e1533 100644
--- a/security/security.c
+++ b/security/security.c
@@ -1097,6 +1097,7 @@
{
security_ops->sk_clone_security(sk, newsk);
}
+EXPORT_SYMBOL(security_sk_clone);
void security_sk_classify_flow(struct sock *sk, struct flowi *fl)
{
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index e9a2a87..191284a 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2370,6 +2370,7 @@
static struct snd_pci_quirk position_fix_list[] __devinitdata = {
SND_PCI_QUIRK(0x1028, 0x01cc, "Dell D820", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1028, 0x01de, "Dell Precision 390", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1028, 0x02c6, "Dell Inspiron 1010", POS_FIX_LPIB),
SND_PCI_QUIRK(0x103c, 0x306d, "HP dv3", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB),
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 7696d05..76752d8e 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -3110,6 +3110,7 @@
SND_PCI_QUIRK(0x17aa, 0x21c5, "Thinkpad Edge 13", CXT5066_THINKPAD),
SND_PCI_QUIRK(0x17aa, 0x21c6, "Thinkpad Edge 13", CXT5066_ASUS),
SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo Thinkpad", CXT5066_THINKPAD),
+ SND_PCI_QUIRK(0x17aa, 0x21cf, "Lenovo T520 & W520", CXT5066_AUTO),
SND_PCI_QUIRK(0x17aa, 0x21da, "Lenovo X220", CXT5066_THINKPAD),
SND_PCI_QUIRK(0x17aa, 0x21db, "Lenovo X220-tablet", CXT5066_THINKPAD),
SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo U350", CXT5066_ASUS),
