| /* |
| * EHCI HCD (Host Controller Driver) for USB. |
| * |
| * (C) Copyright 2007 Imagination Technologies Ltd. |
| * |
| * Bus Glue for Chorus2 On-Chip EHCI driver |
| * |
| * Based on "ehci-au1xxx.c" by K.Boge <karsten.boge@amd.com> |
| * |
| * This file is licenced under the GPL. |
| */ |
| |
| #include <linux/platform_device.h> |
| |
| #define USBMODE_REG 0x200c1a8 |
| |
| /* called during probe() after chip reset completes */ |
| static int ehci_chorus2_setup(struct usb_hcd *hcd) |
| { |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); |
| int retval; |
| |
| /* ehci_halt seems to always fail for this HCD. */ |
| writel(0, &ehci->regs->command); |
| |
| retval = ehci_init(hcd); |
| if (retval) |
| return retval; |
| |
| ehci->sbrn = 0x20; |
| retval = ehci_reset(ehci); |
| if (retval) |
| return retval; |
| |
| writel(3, USBMODE_REG); |
| |
| return 0; |
| } |
| |
| /** |
| * usb_ehci_chorus2_probe() - initialize Chorus2 SoC-based HCDs |
| * @driver: Host controller driver structure |
| * @dev: Platform device |
| * |
| * Allocates basic resources for this USB host controller, and then invokes the |
| * start() method for the HCD associated with it through the hotplug entry's |
| * driver_data. |
| */ |
| static int usb_ehci_chorus2_probe(const struct hc_driver *driver, |
| struct platform_device *dev) |
| { |
| int retval; |
| struct usb_hcd *hcd; |
| struct ehci_hcd *ehci; |
| |
| if (dev->resource[1].flags != IORESOURCE_IRQ) { |
| pr_debug("resource[1] is not IORESOURCE_IRQ"); |
| retval = -ENOMEM; |
| } |
| hcd = usb_create_hcd(driver, &dev->dev, "Chorus2 EHCI"); |
| if (!hcd) |
| return -ENOMEM; |
| hcd->rsrc_start = dev->resource[0].start; |
| hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1; |
| |
| if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { |
| pr_debug("request_mem_region failed"); |
| retval = -EBUSY; |
| goto err1; |
| } |
| |
| hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); |
| if (!hcd->regs) { |
| pr_debug("ioremap failed"); |
| retval = -ENOMEM; |
| goto err2; |
| } |
| |
| hcd->has_tt = 1; |
| |
| ehci = hcd_to_ehci(hcd); |
| ehci->caps = hcd->regs; |
| ehci->regs = hcd->regs + |
| HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); |
| |
| /* cache this readonly data; minimize chip reads */ |
| ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); |
| |
| retval = usb_add_hcd(hcd, dev->resource[1].start, 0); |
| if (retval == 0) |
| return retval; |
| |
| iounmap(hcd->regs); |
| err2: |
| release_mem_region(hcd->rsrc_start, hcd->rsrc_len); |
| err1: |
| usb_put_hcd(hcd); |
| return retval; |
| } |
| |
| /* may be called without controller electrically present */ |
| /* may be called with controller, bus, and devices active */ |
| |
| /** |
| * usb_ehci_hcd_chorus2_remove() - shutdown processing for Chorus2 based HCDs |
| * @hcd: Host controller driver |
| * @dev: Platform device being being removed |
| * |
| * Reverses the effect of @usb_ehci_chorus2_probe, first invoking the HCD's |
| * stop() method. It is always called from a thread context, normally "rmmod", |
| * "apmd", or something similar. |
| */ |
| static void usb_ehci_chorus2_remove(struct usb_hcd *hcd, |
| struct platform_device *dev) |
| { |
| usb_remove_hcd(hcd); |
| iounmap(hcd->regs); |
| release_mem_region(hcd->rsrc_start, hcd->rsrc_len); |
| usb_put_hcd(hcd); |
| } |
| |
| static const struct hc_driver ehci_chorus2_hc_driver = { |
| .description = hcd_name, |
| .product_desc = "Chorus2 EHCI", |
| .hcd_priv_size = sizeof(struct ehci_hcd), |
| |
| /* |
| * generic hardware linkage |
| */ |
| .irq = ehci_irq, |
| .flags = HCD_MEMORY | HCD_USB2, |
| |
| /* |
| * basic lifecycle operations |
| */ |
| .reset = ehci_chorus2_setup, |
| .start = ehci_run, |
| .stop = ehci_stop, |
| .shutdown = ehci_shutdown, |
| |
| /* |
| * managing i/o requests and associated device resources |
| */ |
| .urb_enqueue = ehci_urb_enqueue, |
| .urb_dequeue = ehci_urb_dequeue, |
| .endpoint_disable = ehci_endpoint_disable, |
| .endpoint_reset = ehci_endpoint_reset, |
| |
| /* |
| * scheduling support |
| */ |
| .get_frame_number = ehci_get_frame, |
| |
| /* |
| * root hub support |
| */ |
| .hub_status_data = ehci_hub_status_data, |
| .hub_control = ehci_hub_control, |
| |
| .relinquish_port = ehci_relinquish_port, |
| .port_handed_over = ehci_port_handed_over, |
| |
| .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, |
| }; |
| |
| static int ehci_hcd_chorus2_drv_probe(struct platform_device *pdev) |
| { |
| int ret; |
| |
| if (usb_disabled()) |
| return -ENODEV; |
| |
| ret = usb_ehci_chorus2_probe(&ehci_chorus2_hc_driver, pdev); |
| return ret; |
| } |
| |
| static int ehci_hcd_chorus2_drv_remove(struct platform_device *pdev) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(pdev); |
| |
| usb_ehci_chorus2_remove(hcd, pdev); |
| return 0; |
| } |
| |
| MODULE_ALIAS("chorus2-ehci"); |
| static struct platform_driver ehci_chorus2_driver = { |
| .probe = ehci_hcd_chorus2_drv_probe, |
| .remove = ehci_hcd_chorus2_drv_remove, |
| .shutdown = usb_hcd_platform_shutdown, |
| .driver = { |
| .name = "chorus2-ehci", |
| .bus = &platform_bus_type |
| } |
| }; |