| # |
| # File system configuration |
| # |
| mainmenu_option next_comment |
| comment 'File systems' |
| |
| bool 'Quota support' CONFIG_QUOTA |
| tristate 'Kernel automounter support' CONFIG_AUTOFS_FS |
| tristate 'Kernel automounter version 4 support (also supports v3)' CONFIG_AUTOFS4_FS |
| |
| tristate 'Reiserfs support' CONFIG_REISERFS_FS |
| dep_mbool ' Enable reiserfs debug mode' CONFIG_REISERFS_CHECK $CONFIG_REISERFS_FS |
| dep_mbool ' Stats in /proc/fs/reiserfs' CONFIG_REISERFS_PROC_INFO $CONFIG_REISERFS_FS |
| |
| dep_tristate 'ADFS file system support' CONFIG_ADFS_FS $CONFIG_EXPERIMENTAL |
| dep_mbool ' ADFS write support (DANGEROUS)' CONFIG_ADFS_FS_RW $CONFIG_ADFS_FS $CONFIG_EXPERIMENTAL |
| |
| dep_tristate 'Amiga FFS file system support (EXPERIMENTAL)' CONFIG_AFFS_FS $CONFIG_EXPERIMENTAL |
| |
| dep_tristate 'Apple Macintosh file system support (EXPERIMENTAL)' CONFIG_HFS_FS $CONFIG_EXPERIMENTAL |
| |
| dep_tristate 'BFS file system support (EXPERIMENTAL)' CONFIG_BFS_FS $CONFIG_EXPERIMENTAL |
| |
| tristate 'Ext3 journalling file system support (EXPERIMENTAL)' CONFIG_EXT3_FS |
| # CONFIG_JBD could be its own option (even modular), but until there are |
| # other users than ext3, we will simply make it be the same as CONFIG_EXT3_FS |
| # dep_tristate ' Journal Block Device support (JBD for ext3)' CONFIG_JBD $CONFIG_EXT3_FS |
| define_bool CONFIG_JBD $CONFIG_EXT3_FS |
| dep_mbool ' JBD (ext3) debugging support' CONFIG_JBD_DEBUG $CONFIG_JBD |
| |
| # msdos file systems |
| tristate 'DOS FAT fs support' CONFIG_FAT_FS |
| dep_tristate ' MSDOS fs support' CONFIG_MSDOS_FS $CONFIG_FAT_FS |
| #dep_tristate ' UMSDOS: Unix-like file system on top of standard MSDOS fs' CONFIG_UMSDOS_FS $CONFIG_MSDOS_FS |
| # UMSDOS is temprory broken |
| define_bool CONFIG_UMSDOS_FS n |
| |
| dep_tristate ' VFAT (Windows-95) fs support' CONFIG_VFAT_FS $CONFIG_FAT_FS |
| dep_tristate 'EFS file system support (read only) (EXPERIMENTAL)' CONFIG_EFS_FS $CONFIG_EXPERIMENTAL |
| dep_tristate 'Journalling Flash File System (JFFS) support' CONFIG_JFFS_FS $CONFIG_MTD |
| if [ "$CONFIG_JFFS_FS" = "y" -o "$CONFIG_JFFS_FS" = "m" ] ; then |
| int 'JFFS debugging verbosity (0 = quiet, 3 = noisy)' CONFIG_JFFS_FS_VERBOSE 0 |
| bool 'JFFS stats available in /proc filesystem' CONFIG_JFFS_PROC_FS |
| fi |
| dep_tristate 'Journalling Flash File System v2 (JFFS2) support' CONFIG_JFFS2_FS $CONFIG_MTD |
| if [ "$CONFIG_JFFS2_FS" = "y" -o "$CONFIG_JFFS2_FS" = "m" ] ; then |
| int ' JFFS2 debugging verbosity (0 = quiet, 2 = noisy)' CONFIG_JFFS2_FS_DEBUG 0 |
| dep_bool ' JFFS2 support for NAND flash' CONFIG_JFFS2_FS_NAND $CONFIG_EXPERIMENTAL |
| fi |
| tristate 'Compressed ROM file system support' CONFIG_CRAMFS |
| bool 'Virtual memory file system support (former shm fs)' CONFIG_TMPFS |
| define_bool CONFIG_RAMFS y |
| |
| tristate 'ISO 9660 CDROM file system support' CONFIG_ISO9660_FS |
| dep_mbool ' Microsoft Joliet CDROM extensions' CONFIG_JOLIET $CONFIG_ISO9660_FS |
| dep_mbool ' Transparent decompression extension' CONFIG_ZISOFS $CONFIG_ISO9660_FS |
| |
| tristate 'JFS filesystem support' CONFIG_JFS_FS |
| dep_mbool ' JFS debugging' CONFIG_JFS_DEBUG $CONFIG_JFS_FS |
| dep_mbool ' JFS statistics' CONFIG_JFS_STATISTICS $CONFIG_JFS_FS |
| |
| tristate 'Minix fs support' CONFIG_MINIX_FS |
| |
| tristate 'FreeVxFS file system support (VERITAS VxFS(TM) compatible)' CONFIG_VXFS_FS |
| |
| tristate 'NTFS file system support (read only)' CONFIG_NTFS_FS |
| dep_mbool ' NTFS debugging support' CONFIG_NTFS_DEBUG $CONFIG_NTFS_FS |
| |
| tristate 'OS/2 HPFS file system support' CONFIG_HPFS_FS |
| |
| bool '/proc file system support' CONFIG_PROC_FS |
| |
| dep_bool '/dev file system support (EXPERIMENTAL)' CONFIG_DEVFS_FS $CONFIG_EXPERIMENTAL |
| dep_bool ' Automatically mount at boot' CONFIG_DEVFS_MOUNT $CONFIG_DEVFS_FS |
| dep_bool ' Debug devfs' CONFIG_DEVFS_DEBUG $CONFIG_DEVFS_FS |
| |
| # It compiles as a module for testing only. It should not be used |
| # as a module in general. If we make this "tristate", a bunch of people |
| # who don't know what they are doing turn it on and complain when it |
| # breaks. |
| dep_bool '/dev/pts file system for Unix98 PTYs' CONFIG_DEVPTS_FS $CONFIG_UNIX98_PTYS |
| |
| tristate 'QNX4 file system support (read only)' CONFIG_QNX4FS_FS |
| dep_mbool ' QNX4FS write support (DANGEROUS)' CONFIG_QNX4FS_RW $CONFIG_QNX4FS_FS $CONFIG_EXPERIMENTAL |
| |
| tristate 'ROM file system support' CONFIG_ROMFS_FS |
| |
| tristate 'Second extended fs support' CONFIG_EXT2_FS |
| |
| tristate 'System V/Xenix/V7/Coherent file system support' CONFIG_SYSV_FS |
| |
| tristate 'UDF file system support (read only)' CONFIG_UDF_FS |
| dep_mbool ' UDF write support (DANGEROUS)' CONFIG_UDF_RW $CONFIG_UDF_FS $CONFIG_EXPERIMENTAL |
| |
| tristate 'UFS file system support (read only)' CONFIG_UFS_FS |
| dep_mbool ' UFS file system write support (DANGEROUS)' CONFIG_UFS_FS_WRITE $CONFIG_UFS_FS $CONFIG_EXPERIMENTAL |
| |
| if [ "$CONFIG_NET" = "y" ]; then |
| |
| mainmenu_option next_comment |
| comment 'Network File Systems' |
| |
| dep_tristate 'Coda file system support (advanced network fs)' CONFIG_CODA_FS $CONFIG_INET |
| dep_tristate 'InterMezzo file system support (experimental, replicating fs)' CONFIG_INTERMEZZO_FS $CONFIG_INET $CONFIG_EXPERIMENTAL |
| dep_tristate 'NFS file system support' CONFIG_NFS_FS $CONFIG_INET |
| dep_mbool ' Provide NFSv3 client support' CONFIG_NFS_V3 $CONFIG_NFS_FS |
| dep_bool ' Root file system on NFS' CONFIG_ROOT_NFS $CONFIG_NFS_FS $CONFIG_IP_PNP |
| |
| dep_tristate 'NFS server support' CONFIG_NFSD $CONFIG_INET |
| dep_mbool ' Provide NFSv3 server support' CONFIG_NFSD_V3 $CONFIG_NFSD |
| dep_mbool ' Provide NFS server over TCP support (EXPERIMENTAL)' CONFIG_NFSD_TCP $CONFIG_NFSD $CONFIG_EXPERIMENTAL |
| |
| if [ "$CONFIG_NFS_FS" = "y" -o "$CONFIG_NFSD" = "y" ]; then |
| define_tristate CONFIG_SUNRPC y |
| define_tristate CONFIG_LOCKD y |
| else |
| if [ "$CONFIG_NFS_FS" = "m" -o "$CONFIG_NFSD" = "m" ]; then |
| define_tristate CONFIG_SUNRPC m |
| define_tristate CONFIG_LOCKD m |
| else |
| define_tristate CONFIG_SUNRPC n |
| define_tristate CONFIG_LOCKD n |
| fi |
| fi |
| if [ "$CONFIG_NFSD_V3" = "y" -o "$CONFIG_NFS_V3" = "y" ]; then |
| define_bool CONFIG_LOCKD_V4 y |
| fi |
| define_tristate CONFIG_EXPORTFS $CONFIG_NFSD |
| |
| dep_tristate 'SMB file system support (to mount Windows shares etc.)' CONFIG_SMB_FS $CONFIG_INET |
| if [ "$CONFIG_SMB_FS" != "n" ]; then |
| bool ' Use a default NLS' CONFIG_SMB_NLS_DEFAULT |
| if [ "$CONFIG_SMB_NLS_DEFAULT" = "y" ]; then |
| string ' Default Remote NLS Option' CONFIG_SMB_NLS_REMOTE "cp437" |
| fi |
| fi |
| if [ "$CONFIG_IPX" != "n" -o "$CONFIG_INET" != "n" ]; then |
| tristate 'NCP file system support (to mount NetWare volumes)' CONFIG_NCP_FS |
| source fs/ncpfs/Config.in |
| else |
| # for fs/nls/Config.in |
| define_bool CONFIG_NCPFS_NLS n |
| fi |
| endmenu |
| |
| else |
| # for fs/nls/Config.in |
| define_bool CONFIG_NCPFS_NLS n |
| define_bool CONFIG_SMB_FS n |
| fi |
| |
| if [ "$CONFIG_ZISOFS" = "y" ]; then |
| define_tristate CONFIG_ZISOFS_FS $CONFIG_ISO9660_FS |
| else |
| define_tristate CONFIG_ZISOFS_FS n |
| fi |
| |
| mainmenu_option next_comment |
| comment 'Partition Types' |
| source fs/partitions/Config.in |
| endmenu |
| source fs/nls/Config.in |
| endmenu |