| |
| menu "Code maturity level options" |
| |
| config EXPERIMENTAL |
| bool "Prompt for development and/or incomplete code/drivers" |
| ---help--- |
| Some of the various things that Linux supports (such as network |
| drivers, file systems, network protocols, etc.) can be in a state |
| of development where the functionality, stability, or the level of |
| testing is not yet high enough for general use. This is usually |
| known as the "alpha-test" phase among developers. If a feature is |
| currently in alpha-test, then the developers usually discourage |
| uninformed widespread use of this feature by the general public to |
| avoid "Why doesn't this work?" type mail messages. However, active |
| testing and use of these systems is welcomed. Just be aware that it |
| may not meet the normal level of reliability or it may fail to work |
| in some special cases. Detailed bug reports from people familiar |
| with the kernel internals are usually welcomed by the developers |
| (before submitting bug reports, please read the documents |
| <file:README>, <file:MAINTAINERS>, <file:REPORTING-BUGS>, |
| <file:Documentation/BUG-HUNTING>, and |
| <file:Documentation/oops-tracing.txt> in the kernel source). |
| |
| This option will also make obsoleted drivers available. These are |
| drivers that have been replaced by something else, and/or are |
| scheduled to be removed in a future kernel release. |
| |
| Unless you intend to help test and develop a feature or driver that |
| falls into this category, or you have a situation that requires |
| using these features, you should probably say N here, which will |
| cause the configurator to present you with fewer choices. If |
| you say Y here, you will be offered the choice of using features or |
| drivers that are currently considered to be in the alpha-test phase. |
| |
| config CLEAN_COMPILE |
| bool "Select only drivers expected to compile cleanly" if EXPERIMENTAL |
| default y |
| help |
| Select this option if you don't even want to see the option |
| to configure known-broken drivers. |
| |
| If unsure, say Y |
| |
| config STANDALONE |
| bool "Select only drivers that don't need compile-time external firmware" if EXPERIMENTAL |
| default y |
| help |
| Select this option if you don't have magic firmware for drivers that |
| need it. |
| |
| If unsure, say Y. |
| |
| config BROKEN |
| bool |
| depends on !CLEAN_COMPILE |
| default y |
| |
| config BROKEN_ON_SMP |
| bool |
| depends on BROKEN || !SMP |
| default y |
| |
| endmenu |
| |
| |
| menu "General setup" |
| |
| config SWAP |
| bool "Support for paging of anonymous memory (swap)" |
| depends on MMU |
| default y |
| help |
| This option allows you to choose whether you want to have support |
| for socalled swap devices or swap files in your kernel that are |
| used to provide more virtual memory than the actual RAM present |
| in your computer. If unsure say Y. |
| |
| config SYSVIPC |
| bool "System V IPC" |
| ---help--- |
| Inter Process Communication is a suite of library functions and |
| system calls which let processes (running programs) synchronize and |
| exchange information. It is generally considered to be a good thing, |
| and some programs won't run unless you say Y here. In particular, if |
| you want to run the DOS emulator dosemu under Linux (read the |
| DOSEMU-HOWTO, available from <http://www.tldp.org/docs.html#howto>), |
| you'll need to say Y here. |
| |
| You can find documentation about IPC with "info ipc" and also in |
| section 6.4 of the Linux Programmer's Guide, available from |
| <http://www.tldp.org/guides.html>. |
| |
| config POSIX_MQUEUE |
| bool "POSIX Message Queues" |
| depends on EXPERIMENTAL |
| ---help--- |
| POSIX variant of message queues is a part of IPC. In POSIX message |
| queues every message has a priority which decides about succession |
| of receiving it by a process. If you want to compile and run |
| programs written e.g. for Solaris with use of its POSIX message |
| queues (functions mq_*) say Y here. To use this feature you will |
| also need mqueue library, available from |
| <http://www.mat.uni.torun.pl/~wrona/posix_ipc/> |
| |
| POSIX message queues are visible as a filesystem called 'mqueue' |
| and can be mounted somewhere if you want to do filesystem |
| operations on message queues. |
| |
| If unsure, say Y. |
| |
| config BSD_PROCESS_ACCT |
| bool "BSD Process Accounting" |
| help |
| If you say Y here, a user level program will be able to instruct the |
| kernel (via a special system call) to write process accounting |
| information to a file: whenever a process exits, information about |
| that process will be appended to the file by the kernel. The |
| information includes things such as creation time, owning user, |
| command name, memory usage, controlling terminal etc. (the complete |
| list is in the struct acct in <file:include/linux/acct.h>). It is |
| up to the user level program to do useful things with this |
| information. This is generally a good idea, so say Y. |
| |
| config SYSCTL |
| bool "Sysctl support" |
| ---help--- |
| The sysctl interface provides a means of dynamically changing |
| certain kernel parameters and variables on the fly without requiring |
| a recompile of the kernel or reboot of the system. The primary |
| interface consists of a system call, but if you say Y to "/proc |
| file system support", a tree of modifiable sysctl entries will be |
| generated beneath the /proc/sys directory. They are explained in the |
| files in <file:Documentation/sysctl/>. Note that enabling this |
| option will enlarge the kernel by at least 8 KB. |
| |
| As it is generally a good thing, you should say Y here unless |
| building a kernel for install/rescue disks or your system is very |
| limited in memory. |
| |
| config AUDIT |
| bool "Auditing support" |
| default y if SECURITY_SELINUX |
| default n |
| help |
| Enable auditing infrastructure that can be used with another |
| kernel subsystem, such as SELinux (which requires this for |
| logging of avc messages output). Does not do system-call |
| auditing without CONFIG_AUDITSYSCALL. |
| |
| config AUDITSYSCALL |
| bool "Enable system-call auditing support" |
| depends on AUDIT && (X86 || PPC64) |
| default y if SECURITY_SELINUX |
| default n |
| help |
| Enable low-overhead system-call auditing infrastructure that |
| can be used independently or with another kernel subsystem, |
| such as SELinux. |
| |
| config LOG_BUF_SHIFT |
| int "Kernel log buffer size (16 => 64KB, 17 => 128KB)" if DEBUG_KERNEL |
| range 12 20 |
| default 17 if ARCH_S390 |
| default 16 if X86_NUMAQ || IA64 |
| default 15 if SMP |
| default 14 |
| help |
| Select kernel log buffer size as a power of 2. |
| Defaults and Examples: |
| 17 => 128 KB for S/390 |
| 16 => 64 KB for x86 NUMAQ or IA-64 |
| 15 => 32 KB for SMP |
| 14 => 16 KB for uniprocessor |
| 13 => 8 KB |
| 12 => 4 KB |
| |
| config HOTPLUG |
| bool "Support for hot-pluggable devices" if !ARCH_S390 |
| default ARCH_S390 |
| help |
| Say Y here if you want to plug devices into your computer while |
| the system is running, and be able to use them quickly. In many |
| cases, the devices can likewise be unplugged at any time too. |
| |
| One well known example of this is PCMCIA- or PC-cards, credit-card |
| size devices such as network cards, modems or hard drives which are |
| plugged into slots found on all modern laptop computers. Another |
| example, used on modern desktops as well as laptops, is USB. |
| |
| Enable HOTPLUG and KMOD, and build a modular kernel. Get agent |
| software (at <http://linux-hotplug.sourceforge.net/>) and install it. |
| Then your kernel will automatically call out to a user mode "policy |
| agent" (/sbin/hotplug) to load modules and set up software needed |
| to use devices as you hotplug them. |
| |
| config IKCONFIG |
| bool "Kernel .config support" |
| ---help--- |
| This option enables the complete Linux kernel ".config" file |
| contents, information on compiler used to build the kernel, |
| kernel running when this kernel was built and kernel version |
| from Makefile to be saved in the kernel. It provides documentation |
| of which kernel options are used in a running kernel or in an |
| on-disk kernel. This information can be extracted from the kernel |
| image file with the script scripts/extract-ikconfig and used as |
| input to rebuild the current kernel or to build another kernel. |
| It can also be extracted from a running kernel by reading |
| /proc/config.gz and /proc/config_built_with, if enabled (below). |
| /proc/config.gz will list the configuration that was used |
| to build the kernel and /proc/config_built_with will list |
| information on the compiler and host machine that was used to |
| build the kernel. |
| |
| config IKCONFIG_PROC |
| bool "Enable access to .config through /proc/config.gz" |
| depends on IKCONFIG && PROC_FS |
| ---help--- |
| This option enables access to kernel configuration file and build |
| information through /proc/config.gz. |
| |
| |
| menuconfig EMBEDDED |
| bool "Configure standard kernel features (for small systems)" |
| help |
| This option allows certain base kernel options and settings |
| to be disabled or tweaked. This is for specialized |
| environments which can tolerate a "non-standard" kernel. |
| Only use this if you really know what you are doing. |
| |
| config KALLSYMS |
| bool "Load all symbols for debugging/kksymoops" if EMBEDDED |
| default y |
| help |
| Say Y here to let the kernel print out symbolic crash information and |
| symbolic stack backtraces. This increases the size of the kernel |
| somewhat, as all symbols have to be loaded into the kernel image. |
| |
| config FUTEX |
| bool "Enable futex support" if EMBEDDED |
| default y |
| help |
| Disabling this option will cause the kernel to be built without |
| support for "fast userspace mutexes". The resulting kernel may not |
| run glibc-based applications correctly. |
| |
| config EPOLL |
| bool "Enable eventpoll support" if EMBEDDED |
| default y |
| help |
| Disabling this option will cause the kernel to be built without |
| support for epoll family of system calls. |
| |
| source "drivers/block/Kconfig.iosched" |
| |
| config CC_OPTIMIZE_FOR_SIZE |
| bool "Optimize for size" if EMBEDDED |
| default y if ARM || H8300 |
| default n |
| help |
| Enabling this option will pass "-Os" instead of "-O2" to gcc |
| resulting in a smaller kernel. |
| |
| WARNING: some versions of gcc may generate incorrect code with this |
| option. If problems are observed, a gcc upgrade may be needed. |
| |
| If unsure, say N. |
| |
| endmenu # General setup |
| |
| |
| menu "Loadable module support" |
| |
| config MODULES |
| bool "Enable loadable module support" |
| help |
| Kernel modules are small pieces of compiled code which can |
| be inserted in the running kernel, rather than being |
| permanently built into the kernel. You use the "modprobe" |
| tool to add (and sometimes remove) them. If you say Y here, |
| many parts of the kernel can be built as modules (by |
| answering M instead of Y where indicated): this is most |
| useful for infrequently used options which are not required |
| for booting. For more information, see the man pages for |
| modprobe, lsmod, modinfo, insmod and rmmod. |
| |
| If you say Y here, you will need to run "make |
| modules_install" to put the modules under /lib/modules/ |
| where modprobe can find them (you may need to be root to do |
| this). |
| |
| If unsure, say Y. |
| |
| config MODULE_UNLOAD |
| bool "Module unloading" |
| depends on MODULES |
| help |
| Without this option you will not be able to unload any |
| modules (note that some modules may not be unloadable |
| anyway), which makes your kernel slightly smaller and |
| simpler. If unsure, say Y. |
| |
| config MODULE_FORCE_UNLOAD |
| bool "Forced module unloading" |
| depends on MODULE_UNLOAD && EXPERIMENTAL |
| help |
| This option allows you to force a module to unload, even if the |
| kernel believes it is unsafe: the kernel will remove the module |
| without waiting for anyone to stop using it (using the -f option to |
| rmmod). This is mainly for kernel developers and desperate users. |
| If unsure, say N. |
| |
| config OBSOLETE_MODPARM |
| bool |
| default y |
| depends on MODULES |
| help |
| You need this option to use module parameters on modules which |
| have not been converted to the new module parameter system yet. |
| If unsure, say Y. |
| |
| config MODVERSIONS |
| bool "Module versioning support (EXPERIMENTAL)" |
| depends on MODULES && EXPERIMENTAL |
| help |
| Usually, you have to use modules compiled with your kernel. |
| Saying Y here makes it sometimes possible to use modules |
| compiled for different kernels, by adding enough information |
| to the modules to (hopefully) spot any changes which would |
| make them incompatible with the kernel you are running. If |
| unsure, say N. |
| |
| config KMOD |
| bool "Automatic kernel module loading" |
| depends on MODULES |
| help |
| Normally when you have selected some parts of the kernel to |
| be created as kernel modules, you must load them (using the |
| "modprobe" command) before you can use them. If you say Y |
| here, some parts of the kernel will be able to load modules |
| automatically: when a part of the kernel needs a module, it |
| runs modprobe with the appropriate arguments, thereby |
| loading the module if it is available. If unsure, say Y. |
| |
| config STOP_MACHINE |
| bool |
| default y |
| depends on (SMP && MODULE_UNLOAD) || HOTPLUG_CPU |
| help |
| Need stop_machine() primitive. |
| endmenu |