| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2017 Rockchip Electronics Co., Ltd |
| */ |
| |
| #include <dt-bindings/clock/rk3128-cru.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/pinctrl/rockchip.h> |
| |
| / { |
| compatible = "rockchip,rk3128"; |
| interrupt-parent = <&gic>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| arm-pmu { |
| compatible = "arm,cortex-a7-pmu"; |
| interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| enable-method = "rockchip,rk3036-smp"; |
| |
| cpu0: cpu@f00 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0xf00>; |
| clock-latency = <40000>; |
| clocks = <&cru ARMCLK>; |
| resets = <&cru SRST_CORE0>; |
| operating-points-v2 = <&cpu_opp_table>; |
| #cooling-cells = <2>; /* min followed by max */ |
| }; |
| |
| cpu1: cpu@f01 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0xf01>; |
| resets = <&cru SRST_CORE1>; |
| operating-points-v2 = <&cpu_opp_table>; |
| }; |
| |
| cpu2: cpu@f02 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0xf02>; |
| resets = <&cru SRST_CORE2>; |
| operating-points-v2 = <&cpu_opp_table>; |
| }; |
| |
| cpu3: cpu@f03 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0xf03>; |
| resets = <&cru SRST_CORE3>; |
| operating-points-v2 = <&cpu_opp_table>; |
| }; |
| }; |
| |
| cpu_opp_table: opp-table-0 { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| |
| opp-216000000 { |
| opp-hz = /bits/ 64 <216000000>; |
| opp-microvolt = <950000 950000 1325000>; |
| }; |
| opp-408000000 { |
| opp-hz = /bits/ 64 <408000000>; |
| opp-microvolt = <950000 950000 1325000>; |
| }; |
| opp-600000000 { |
| opp-hz = /bits/ 64 <600000000>; |
| opp-microvolt = <950000 950000 1325000>; |
| }; |
| opp-696000000 { |
| opp-hz = /bits/ 64 <696000000>; |
| opp-microvolt = <975000 975000 1325000>; |
| }; |
| opp-816000000 { |
| opp-hz = /bits/ 64 <816000000>; |
| opp-microvolt = <1075000 1075000 1325000>; |
| opp-suspend; |
| }; |
| opp-1008000000 { |
| opp-hz = /bits/ 64 <1008000000>; |
| opp-microvolt = <1200000 1200000 1325000>; |
| }; |
| opp-1200000000 { |
| opp-hz = /bits/ 64 <1200000000>; |
| opp-microvolt = <1325000 1325000 1325000>; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| arm,cpu-registers-not-fw-configured; |
| clock-frequency = <24000000>; |
| }; |
| |
| xin24m: oscillator { |
| compatible = "fixed-clock"; |
| clock-frequency = <24000000>; |
| clock-output-names = "xin24m"; |
| #clock-cells = <0>; |
| }; |
| |
| imem: sram@10080000 { |
| compatible = "mmio-sram"; |
| reg = <0x10080000 0x2000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x10080000 0x2000>; |
| |
| smp-sram@0 { |
| compatible = "rockchip,rk3066-smp-sram"; |
| reg = <0x00 0x10>; |
| }; |
| }; |
| |
| pmu: syscon@100a0000 { |
| compatible = "rockchip,rk3128-pmu", "syscon", "simple-mfd"; |
| reg = <0x100a0000 0x1000>; |
| }; |
| |
| gic: interrupt-controller@10139000 { |
| compatible = "arm,cortex-a7-gic"; |
| reg = <0x10139000 0x1000>, |
| <0x1013a000 0x1000>, |
| <0x1013c000 0x2000>, |
| <0x1013e000 0x2000>; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| #address-cells = <0>; |
| }; |
| |
| usb_otg: usb@10180000 { |
| compatible = "rockchip,rk3128-usb", "rockchip,rk3066-usb", "snps,dwc2"; |
| reg = <0x10180000 0x40000>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru HCLK_OTG>; |
| clock-names = "otg"; |
| dr_mode = "otg"; |
| phys = <&usb2phy_otg>; |
| phy-names = "usb2-phy"; |
| status = "disabled"; |
| }; |
| |
| usb_host_ehci: usb@101c0000 { |
| compatible = "generic-ehci"; |
| reg = <0x101c0000 0x20000>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| phys = <&usb2phy_host>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| usb_host_ohci: usb@101e0000 { |
| compatible = "generic-ohci"; |
| reg = <0x101e0000 0x20000>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| phys = <&usb2phy_host>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| sdmmc: mmc@10214000 { |
| compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc"; |
| reg = <0x10214000 0x4000>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, |
| <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; |
| clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; |
| dmas = <&pdma 10>; |
| dma-names = "rx-tx"; |
| fifo-depth = <256>; |
| max-frequency = <150000000>; |
| resets = <&cru SRST_SDMMC>; |
| reset-names = "reset"; |
| status = "disabled"; |
| }; |
| |
| sdio: mmc@10218000 { |
| compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc"; |
| reg = <0x10218000 0x4000>; |
| interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, |
| <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; |
| clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; |
| dmas = <&pdma 11>; |
| dma-names = "rx-tx"; |
| fifo-depth = <256>; |
| max-frequency = <150000000>; |
| resets = <&cru SRST_SDIO>; |
| reset-names = "reset"; |
| status = "disabled"; |
| }; |
| |
| emmc: mmc@1021c000 { |
| compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc"; |
| reg = <0x1021c000 0x4000>; |
| interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, |
| <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; |
| clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; |
| dmas = <&pdma 12>; |
| dma-names = "rx-tx"; |
| fifo-depth = <256>; |
| max-frequency = <150000000>; |
| resets = <&cru SRST_EMMC>; |
| reset-names = "reset"; |
| status = "disabled"; |
| }; |
| |
| nfc: nand-controller@10500000 { |
| compatible = "rockchip,rk3128-nfc", "rockchip,rk2928-nfc"; |
| reg = <0x10500000 0x4000>; |
| interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>; |
| clock-names = "ahb", "nfc"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_cs0 |
| &flash_dqs &flash_rdn &flash_rdy &flash_wrn>; |
| status = "disabled"; |
| }; |
| |
| cru: clock-controller@20000000 { |
| compatible = "rockchip,rk3128-cru"; |
| reg = <0x20000000 0x1000>; |
| clocks = <&xin24m>; |
| clock-names = "xin24m"; |
| rockchip,grf = <&grf>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| assigned-clocks = <&cru PLL_GPLL>; |
| assigned-clock-rates = <594000000>; |
| }; |
| |
| grf: syscon@20008000 { |
| compatible = "rockchip,rk3128-grf", "syscon", "simple-mfd"; |
| reg = <0x20008000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| usb2phy: usb2phy@17c { |
| compatible = "rockchip,rk3128-usb2phy"; |
| reg = <0x017c 0x0c>; |
| clocks = <&cru SCLK_OTGPHY0>; |
| clock-names = "phyclk"; |
| clock-output-names = "usb480m_phy"; |
| #clock-cells = <0>; |
| status = "disabled"; |
| |
| usb2phy_host: host-port { |
| interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "linestate"; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| usb2phy_otg: otg-port { |
| interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "otg-bvalid", "otg-id", |
| "linestate"; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| timer0: timer@20044000 { |
| compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer"; |
| reg = <0x20044000 0x20>; |
| interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>; |
| clock-names = "pclk", "timer"; |
| }; |
| |
| timer1: timer@20044020 { |
| compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer"; |
| reg = <0x20044020 0x20>; |
| interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER1>; |
| clock-names = "pclk", "timer"; |
| }; |
| |
| timer2: timer@20044040 { |
| compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer"; |
| reg = <0x20044040 0x20>; |
| interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER2>; |
| clock-names = "pclk", "timer"; |
| }; |
| |
| timer3: timer@20044060 { |
| compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer"; |
| reg = <0x20044060 0x20>; |
| interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER3>; |
| clock-names = "pclk", "timer"; |
| }; |
| |
| timer4: timer@20044080 { |
| compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer"; |
| reg = <0x20044080 0x20>; |
| interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER4>; |
| clock-names = "pclk", "timer"; |
| }; |
| |
| timer5: timer@200440a0 { |
| compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer"; |
| reg = <0x200440a0 0x20>; |
| interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER5>; |
| clock-names = "pclk", "timer"; |
| }; |
| |
| watchdog: watchdog@2004c000 { |
| compatible = "rockchip,rk3128-wdt", "snps,dw-wdt"; |
| reg = <0x2004c000 0x100>; |
| interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_WDT>; |
| status = "disabled"; |
| }; |
| |
| pwm0: pwm@20050000 { |
| compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm"; |
| reg = <0x20050000 0x10>; |
| clocks = <&cru PCLK_PWM>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm0_pin>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm1: pwm@20050010 { |
| compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm"; |
| reg = <0x20050010 0x10>; |
| clocks = <&cru PCLK_PWM>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm1_pin>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm2: pwm@20050020 { |
| compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm"; |
| reg = <0x20050020 0x10>; |
| clocks = <&cru PCLK_PWM>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm2_pin>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm3: pwm@20050030 { |
| compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm"; |
| reg = <0x20050030 0x10>; |
| clocks = <&cru PCLK_PWM>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm3_pin>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@20056000 { |
| compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c"; |
| reg = <0x20056000 0x1000>; |
| interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "i2c"; |
| clocks = <&cru PCLK_I2C1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_xfer>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@2005a000 { |
| compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c"; |
| reg = <0x2005a000 0x1000>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "i2c"; |
| clocks = <&cru PCLK_I2C2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c2_xfer>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@2005e000 { |
| compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c"; |
| reg = <0x2005e000 0x1000>; |
| interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "i2c"; |
| clocks = <&cru PCLK_I2C3>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c3_xfer>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@20060000 { |
| compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart"; |
| reg = <0x20060000 0x100>; |
| interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <24000000>; |
| clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; |
| clock-names = "baudclk", "apb_pclk"; |
| dmas = <&pdma 2>, <&pdma 3>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; |
| reg-io-width = <4>; |
| reg-shift = <2>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@20064000 { |
| compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart"; |
| reg = <0x20064000 0x100>; |
| interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <24000000>; |
| clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; |
| clock-names = "baudclk", "apb_pclk"; |
| dmas = <&pdma 4>, <&pdma 5>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart1_xfer>; |
| reg-io-width = <4>; |
| reg-shift = <2>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@20068000 { |
| compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart"; |
| reg = <0x20068000 0x100>; |
| interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <24000000>; |
| clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; |
| clock-names = "baudclk", "apb_pclk"; |
| dmas = <&pdma 6>, <&pdma 7>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart2_xfer>; |
| reg-io-width = <4>; |
| reg-shift = <2>; |
| status = "disabled"; |
| }; |
| |
| saradc: saradc@2006c000 { |
| compatible = "rockchip,saradc"; |
| reg = <0x2006c000 0x100>; |
| interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; |
| clock-names = "saradc", "apb_pclk"; |
| resets = <&cru SRST_SARADC>; |
| reset-names = "saradc-apb"; |
| #io-channel-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@20072000 { |
| compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c"; |
| reg = <0x20072000 0x1000>; |
| interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "i2c"; |
| clocks = <&cru PCLK_I2C0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_xfer>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@20074000 { |
| compatible = "rockchip,rk3128-spi", "rockchip,rk3066-spi"; |
| reg = <0x20074000 0x1000>; |
| interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; |
| clock-names = "spiclk", "apb_pclk"; |
| dmas = <&pdma 8>, <&pdma 9>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi0_tx &spi0_rx &spi0_clk &spi0_cs0 &spi0_cs1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| pdma: dma-controller@20078000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x20078000 0x4000>; |
| interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| arm,pl330-broken-no-flushp; |
| arm,pl330-periph-burst; |
| clocks = <&cru ACLK_DMAC>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| }; |
| |
| pinctrl: pinctrl { |
| compatible = "rockchip,rk3128-pinctrl"; |
| rockchip,grf = <&grf>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| gpio0: gpio@2007c000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x2007c000 0x100>; |
| interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_GPIO0>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio1: gpio@20080000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x20080000 0x100>; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_GPIO1>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio2: gpio@20084000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x20084000 0x100>; |
| interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_GPIO2>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio3: gpio@20088000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x20088000 0x100>; |
| interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_GPIO3>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| pcfg_pull_default: pcfg-pull-default { |
| bias-pull-pin-default; |
| }; |
| |
| pcfg_pull_none: pcfg-pull-none { |
| bias-disable; |
| }; |
| |
| emmc { |
| emmc_clk: emmc-clk { |
| rockchip,pins = <2 RK_PA7 2 &pcfg_pull_none>; |
| }; |
| |
| emmc_cmd: emmc-cmd { |
| rockchip,pins = <1 RK_PC6 2 &pcfg_pull_default>; |
| }; |
| |
| emmc_cmd1: emmc-cmd1 { |
| rockchip,pins = <2 RK_PA4 2 &pcfg_pull_default>; |
| }; |
| |
| emmc_pwr: emmc-pwr { |
| rockchip,pins = <2 RK_PA5 2 &pcfg_pull_default>; |
| }; |
| |
| emmc_bus1: emmc-bus1 { |
| rockchip,pins = <1 RK_PD0 2 &pcfg_pull_default>; |
| }; |
| |
| emmc_bus4: emmc-bus4 { |
| rockchip,pins = <1 RK_PD0 2 &pcfg_pull_default>, |
| <1 RK_PD1 2 &pcfg_pull_default>, |
| <1 RK_PD2 2 &pcfg_pull_default>, |
| <1 RK_PD3 2 &pcfg_pull_default>; |
| }; |
| |
| emmc_bus8: emmc-bus8 { |
| rockchip,pins = <1 RK_PD0 2 &pcfg_pull_default>, |
| <1 RK_PD1 2 &pcfg_pull_default>, |
| <1 RK_PD2 2 &pcfg_pull_default>, |
| <1 RK_PD3 2 &pcfg_pull_default>, |
| <1 RK_PD4 2 &pcfg_pull_default>, |
| <1 RK_PD5 2 &pcfg_pull_default>, |
| <1 RK_PD6 2 &pcfg_pull_default>, |
| <1 RK_PD7 2 &pcfg_pull_default>; |
| }; |
| }; |
| |
| gmac { |
| rgmii_pins: rgmii-pins { |
| rockchip,pins = <2 RK_PB0 3 &pcfg_pull_default>, |
| <2 RK_PB1 3 &pcfg_pull_default>, |
| <2 RK_PB3 3 &pcfg_pull_default>, |
| <2 RK_PB4 3 &pcfg_pull_default>, |
| <2 RK_PB5 3 &pcfg_pull_default>, |
| <2 RK_PB6 3 &pcfg_pull_default>, |
| <2 RK_PC0 3 &pcfg_pull_default>, |
| <2 RK_PC1 3 &pcfg_pull_default>, |
| <2 RK_PC2 3 &pcfg_pull_default>, |
| <2 RK_PC3 3 &pcfg_pull_default>, |
| <2 RK_PD1 3 &pcfg_pull_default>, |
| <2 RK_PC4 4 &pcfg_pull_default>, |
| <2 RK_PC5 4 &pcfg_pull_default>, |
| <2 RK_PC6 4 &pcfg_pull_default>, |
| <2 RK_PC7 4 &pcfg_pull_default>; |
| }; |
| |
| rmii_pins: rmii-pins { |
| rockchip,pins = <2 RK_PB0 3 &pcfg_pull_default>, |
| <2 RK_PB4 3 &pcfg_pull_default>, |
| <2 RK_PB5 3 &pcfg_pull_default>, |
| <2 RK_PB6 3 &pcfg_pull_default>, |
| <2 RK_PB7 3 &pcfg_pull_default>, |
| <2 RK_PC0 3 &pcfg_pull_default>, |
| <2 RK_PC1 3 &pcfg_pull_default>, |
| <2 RK_PC2 3 &pcfg_pull_default>, |
| <2 RK_PC3 3 &pcfg_pull_default>, |
| <2 RK_PD1 3 &pcfg_pull_default>; |
| }; |
| }; |
| |
| hdmi { |
| hdmii2c_xfer: hdmii2c-xfer { |
| rockchip,pins = <0 RK_PA6 2 &pcfg_pull_none>, |
| <0 RK_PA7 2 &pcfg_pull_none>; |
| }; |
| |
| hdmi_hpd: hdmi-hpd { |
| rockchip,pins = <0 RK_PB7 1 &pcfg_pull_none>; |
| }; |
| |
| hdmi_cec: hdmi-cec { |
| rockchip,pins = <0 RK_PC4 1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c0 { |
| i2c0_xfer: i2c0-xfer { |
| rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>, |
| <0 RK_PA1 1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c1 { |
| i2c1_xfer: i2c1-xfer { |
| rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>, |
| <0 RK_PA3 1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c2 { |
| i2c2_xfer: i2c2-xfer { |
| rockchip,pins = <2 RK_PC4 3 &pcfg_pull_none>, |
| <2 RK_PC5 3 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c3 { |
| i2c3_xfer: i2c3-xfer { |
| rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>, |
| <0 RK_PA7 1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2s { |
| i2s_bus: i2s-bus { |
| rockchip,pins = <0 RK_PB0 1 &pcfg_pull_none>, |
| <0 RK_PB1 1 &pcfg_pull_none>, |
| <0 RK_PB3 1 &pcfg_pull_none>, |
| <0 RK_PB4 1 &pcfg_pull_none>, |
| <0 RK_PB5 1 &pcfg_pull_none>, |
| <0 RK_PB6 1 &pcfg_pull_none>; |
| }; |
| |
| i2s1_bus: i2s1-bus { |
| rockchip,pins = <1 RK_PA0 1 &pcfg_pull_none>, |
| <1 RK_PA1 1 &pcfg_pull_none>, |
| <1 RK_PA2 1 &pcfg_pull_none>, |
| <1 RK_PA3 1 &pcfg_pull_none>, |
| <1 RK_PA4 1 &pcfg_pull_none>, |
| <1 RK_PA5 1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| lcdc { |
| lcdc_dclk: lcdc-dclk { |
| rockchip,pins = <2 RK_PB0 1 &pcfg_pull_none>; |
| }; |
| |
| lcdc_den: lcdc-den { |
| rockchip,pins = <2 RK_PB3 1 &pcfg_pull_none>; |
| }; |
| |
| lcdc_hsync: lcdc-hsync { |
| rockchip,pins = <2 RK_PB1 1 &pcfg_pull_none>; |
| }; |
| |
| lcdc_vsync: lcdc-vsync { |
| rockchip,pins = <2 RK_PB2 1 &pcfg_pull_none>; |
| }; |
| |
| lcdc_rgb24: lcdc-rgb24 { |
| rockchip,pins = <2 RK_PB4 1 &pcfg_pull_none>, |
| <2 RK_PB5 1 &pcfg_pull_none>, |
| <2 RK_PB6 1 &pcfg_pull_none>, |
| <2 RK_PB7 1 &pcfg_pull_none>, |
| <2 RK_PC0 1 &pcfg_pull_none>, |
| <2 RK_PC1 1 &pcfg_pull_none>, |
| <2 RK_PC2 1 &pcfg_pull_none>, |
| <2 RK_PC3 1 &pcfg_pull_none>, |
| <2 RK_PC4 1 &pcfg_pull_none>, |
| <2 RK_PC5 1 &pcfg_pull_none>, |
| <2 RK_PC6 1 &pcfg_pull_none>, |
| <2 RK_PC7 1 &pcfg_pull_none>, |
| <2 RK_PD0 1 &pcfg_pull_none>, |
| <2 RK_PD1 1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| nfc { |
| flash_ale: flash-ale { |
| rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>; |
| }; |
| |
| flash_cle: flash-cle { |
| rockchip,pins = <2 RK_PA1 1 &pcfg_pull_none>; |
| }; |
| |
| flash_wrn: flash-wrn { |
| rockchip,pins = <2 RK_PA2 1 &pcfg_pull_none>; |
| }; |
| |
| flash_rdn: flash-rdn { |
| rockchip,pins = <2 RK_PA3 1 &pcfg_pull_none>; |
| }; |
| |
| flash_rdy: flash-rdy { |
| rockchip,pins = <2 RK_PA4 1 &pcfg_pull_none>; |
| }; |
| |
| flash_cs0: flash-cs0 { |
| rockchip,pins = <2 RK_PA6 1 &pcfg_pull_none>; |
| }; |
| |
| flash_dqs: flash-dqs { |
| rockchip,pins = <2 RK_PA7 1 &pcfg_pull_none>; |
| }; |
| |
| flash_bus8: flash-bus8 { |
| rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>, |
| <1 RK_PD1 1 &pcfg_pull_none>, |
| <1 RK_PD2 1 &pcfg_pull_none>, |
| <1 RK_PD3 1 &pcfg_pull_none>, |
| <1 RK_PD4 1 &pcfg_pull_none>, |
| <1 RK_PD5 1 &pcfg_pull_none>, |
| <1 RK_PD6 1 &pcfg_pull_none>, |
| <1 RK_PD7 1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| pwm0 { |
| pwm0_pin: pwm0-pin { |
| rockchip,pins = <0 RK_PD2 1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| pwm1 { |
| pwm1_pin: pwm1-pin { |
| rockchip,pins = <0 RK_PD3 1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| pwm2 { |
| pwm2_pin: pwm2-pin { |
| rockchip,pins = <0 RK_PD4 1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| pwm3 { |
| pwm3_pin: pwm3-pin { |
| rockchip,pins = <3 RK_PD2 1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| sdio { |
| sdio_clk: sdio-clk { |
| rockchip,pins = <1 RK_PA0 2 &pcfg_pull_none>; |
| }; |
| |
| sdio_cmd: sdio-cmd { |
| rockchip,pins = <0 RK_PA3 2 &pcfg_pull_default>; |
| }; |
| |
| sdio_pwren: sdio-pwren { |
| rockchip,pins = <0 RK_PD6 1 &pcfg_pull_default>; |
| }; |
| |
| sdio_bus4: sdio-bus4 { |
| rockchip,pins = <1 RK_PA1 2 &pcfg_pull_default>, |
| <1 RK_PA2 2 &pcfg_pull_default>, |
| <1 RK_PA4 2 &pcfg_pull_default>, |
| <1 RK_PA5 2 &pcfg_pull_default>; |
| }; |
| }; |
| |
| sdmmc { |
| sdmmc_clk: sdmmc-clk { |
| rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>; |
| }; |
| |
| sdmmc_cmd: sdmmc-cmd { |
| rockchip,pins = <1 RK_PB7 1 &pcfg_pull_default>; |
| }; |
| |
| sdmmc_wp: sdmmc-wp { |
| rockchip,pins = <1 RK_PA7 1 &pcfg_pull_default>; |
| }; |
| |
| sdmmc_pwren: sdmmc-pwren { |
| rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_default>; |
| }; |
| |
| sdmmc_bus4: sdmmc-bus4 { |
| rockchip,pins = <1 RK_PC2 1 &pcfg_pull_default>, |
| <1 RK_PC3 1 &pcfg_pull_default>, |
| <1 RK_PC4 1 &pcfg_pull_default>, |
| <1 RK_PC5 1 &pcfg_pull_default>; |
| }; |
| }; |
| |
| spdif { |
| spdif_tx: spdif-tx { |
| rockchip,pins = <3 RK_PD3 1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| spi0 { |
| spi0_clk: spi0-clk { |
| rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>; |
| }; |
| |
| spi0_cs0: spi0-cs0 { |
| rockchip,pins = <1 RK_PB3 1 &pcfg_pull_default>; |
| }; |
| |
| spi0_tx: spi0-tx { |
| rockchip,pins = <1 RK_PB1 1 &pcfg_pull_default>; |
| }; |
| |
| spi0_rx: spi0-rx { |
| rockchip,pins = <1 RK_PB2 1 &pcfg_pull_default>; |
| }; |
| |
| spi0_cs1: spi0-cs1 { |
| rockchip,pins = <1 RK_PB4 1 &pcfg_pull_default>; |
| }; |
| |
| spi1_clk: spi1-clk { |
| rockchip,pins = <2 RK_PA0 2 &pcfg_pull_default>; |
| }; |
| |
| spi1_cs0: spi1-cs0 { |
| rockchip,pins = <1 RK_PD6 3 &pcfg_pull_default>; |
| }; |
| |
| spi1_tx: spi1-tx { |
| rockchip,pins = <1 RK_PD5 3 &pcfg_pull_default>; |
| }; |
| |
| spi1_rx: spi1-rx { |
| rockchip,pins = <1 RK_PD4 3 &pcfg_pull_default>; |
| }; |
| |
| spi1_cs1: spi1-cs1 { |
| rockchip,pins = <1 RK_PD7 3 &pcfg_pull_default>; |
| }; |
| |
| spi2_clk: spi2-clk { |
| rockchip,pins = <0 RK_PB1 2 &pcfg_pull_default>; |
| }; |
| |
| spi2_cs0: spi2-cs0 { |
| rockchip,pins = <0 RK_PB6 2 &pcfg_pull_default>; |
| }; |
| |
| spi2_tx: spi2-tx { |
| rockchip,pins = <0 RK_PB3 2 &pcfg_pull_default>; |
| }; |
| |
| spi2_rx: spi2-rx { |
| rockchip,pins = <0 RK_PB5 2 &pcfg_pull_default>; |
| }; |
| }; |
| |
| uart0 { |
| uart0_xfer: uart0-xfer { |
| rockchip,pins = <2 RK_PD2 2 &pcfg_pull_default>, |
| <2 RK_PD3 2 &pcfg_pull_none>; |
| }; |
| |
| uart0_cts: uart0-cts { |
| rockchip,pins = <2 RK_PD5 2 &pcfg_pull_none>; |
| }; |
| |
| uart0_rts: uart0-rts { |
| rockchip,pins = <0 RK_PC1 2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| uart1 { |
| uart1_xfer: uart1-xfer { |
| rockchip,pins = <1 RK_PB1 2 &pcfg_pull_default>, |
| <1 RK_PB2 2 &pcfg_pull_default>; |
| }; |
| |
| uart1_cts: uart1-cts { |
| rockchip,pins = <1 RK_PB0 2 &pcfg_pull_none>; |
| }; |
| |
| uart1_rts: uart1-rts { |
| rockchip,pins = <1 RK_PB3 2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| uart2 { |
| uart2_xfer: uart2-xfer { |
| rockchip,pins = <1 RK_PC2 2 &pcfg_pull_default>, |
| <1 RK_PC3 2 &pcfg_pull_none>; |
| }; |
| |
| uart2_cts: uart2-cts { |
| rockchip,pins = <0 RK_PD1 1 &pcfg_pull_none>; |
| }; |
| |
| uart2_rts: uart2-rts { |
| rockchip,pins = <0 RK_PD0 1 &pcfg_pull_none>; |
| }; |
| }; |
| }; |
| }; |
