Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This patch is the usual mix of driver updates (srp, ipr, scsi_debug,
NCR5380, fnic, 53c974, ses, wd719x, hpsa, megaraid_sas).
Of those, wd7a9x is new and 53c974 is a rewrite of the old tmscsim
driver and the extensive work by Finn Thain rewrites all the NCR5380
based drivers.
There's also extensive infrastructure updates: a new logging
infrastructure for sense information and a rewrite of the tagged
command queue API and an assortment of minor updates"
* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (183 commits)
scsi: set fmt to NULL scsi_extd_sense_format() by default
libsas: remove task_collector mode
wd719x: remove dma_cache_sync call
scsi_debug: add Report supported opcodes+tmfs; Compare and write
scsi_debug: change SCSI command parser to table driven
scsi_debug: add Capacity Changed Unit Attention
scsi_debug: append inject error flags onto scsi_cmnd object
scsi_debug: pinpoint invalid field in sense data
wd719x: Add firmware documentation
wd719x: Introduce Western Digital WD7193/7197/7296 PCI SCSI card driver
eeprom-93cx6: Add (read-only) support for 8-bit mode
esas2r: fix an oversight in setting return value
esas2r: fix an error path in esas2r_ioctl_handler
esas2r: fir error handling in do_fm_api
scsi: add SPC-3 command definitions
scsi: rename SERVICE_ACTION_IN to SERVICE_ACTION_IN_16
scsi: remove scsi_driver owner field
scsi: move scsi_dispatch_cmd to scsi_lib.c
scsi: stop passing a gfp_mask argument down the command setup path
scsi: remove scsi_next_command
...
diff --git a/Documentation/device-mapper/cache-policies.txt b/Documentation/device-mapper/cache-policies.txt
index 66c2774..0d124a9 100644
--- a/Documentation/device-mapper/cache-policies.txt
+++ b/Documentation/device-mapper/cache-policies.txt
@@ -47,20 +47,26 @@
'discard_promote_adjustment <value>'
The sequential threshold indicates the number of contiguous I/Os
-required before a stream is treated as sequential. The random threshold
+required before a stream is treated as sequential. Once a stream is
+considered sequential it will bypass the cache. The random threshold
is the number of intervening non-contiguous I/Os that must be seen
before the stream is treated as random again.
The sequential and random thresholds default to 512 and 4 respectively.
-Large, sequential ios are probably better left on the origin device
-since spindles tend to have good bandwidth. The io_tracker counts
-contiguous I/Os to try to spot when the io is in one of these sequential
-modes.
+Large, sequential I/Os are probably better left on the origin device
+since spindles tend to have good sequential I/O bandwidth. The
+io_tracker counts contiguous I/Os to try to spot when the I/O is in one
+of these sequential modes. But there are use-cases for wanting to
+promote sequential blocks to the cache (e.g. fast application startup).
+If sequential threshold is set to 0 the sequential I/O detection is
+disabled and sequential I/O will no longer implicitly bypass the cache.
+Setting the random threshold to 0 does _not_ disable the random I/O
+stream detection.
-Internally the mq policy maintains a promotion threshold variable. If
-the hit count of a block not in the cache goes above this threshold it
-gets promoted to the cache. The read, write and discard promote adjustment
+Internally the mq policy determines a promotion threshold. If the hit
+count of a block not in the cache goes above this threshold it gets
+promoted to the cache. The read, write and discard promote adjustment
tunables allow you to tweak the promotion threshold by adding a small
value based on the io type. They default to 4, 8 and 1 respectively.
If you're trying to quickly warm a new cache device you may wish to
diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
new file mode 100644
index 0000000..ed2f09d
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
@@ -0,0 +1,39 @@
+ltc2978
+
+Required properties:
+- compatible: should contain one of:
+ * "lltc,ltc2974"
+ * "lltc,ltc2977"
+ * "lltc,ltc2978"
+ * "lltc,ltc3880"
+ * "lltc,ltc3883"
+ * "lltc,ltm4676"
+- reg: I2C slave address
+
+Optional properties:
+- regulators: A node that houses a sub-node for each regulator controlled by
+ the device. Each sub-node is identified using the node's name, with valid
+ values listed below. The content of each sub-node is defined by the
+ standard binding for regulators; see regulator.txt.
+
+Valid names of regulators depend on number of supplies supported per device:
+ * ltc2974 : vout0 - vout3
+ * ltc2977 : vout0 - vout7
+ * ltc2978 : vout0 - vout7
+ * ltc3880 : vout0 - vout1
+ * ltc3883 : vout0
+ * ltm4676 : vout0 - vout1
+
+Example:
+ltc2978@5e {
+ compatible = "lltc,ltc2978";
+ reg = <0x5e>;
+ regulators {
+ vout0 {
+ regulator-name = "FPGA-2.5V";
+ };
+ vout2 {
+ regulator-name = "FPGA-1.5V";
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
new file mode 100644
index 0000000..f64de95a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
@@ -0,0 +1,51 @@
+Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
+
+Required properties:
+ - compatible: value should be one of the following:
+ "atmel,sama5d3-hlcdc"
+ - reg: base address and size of the HLCDC device registers.
+ - clock-names: the name of the 3 clocks requested by the HLCDC device.
+ Should contain "periph_clk", "sys_clk" and "slow_clk".
+ - clocks: should contain the 3 clocks requested by the HLCDC device.
+ - interrupts: should contain the description of the HLCDC interrupt line
+
+The HLCDC IP exposes two subdevices:
+ - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt
+ - a Display Controller: see ../drm/atmel-hlcdc-dc.txt
+
+Example:
+
+ hlcdc: hlcdc@f0030000 {
+ compatible = "atmel,sama5d3-hlcdc";
+ reg = <0xf0030000 0x2000>;
+ clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+ clock-names = "periph_clk","sys_clk", "slow_clk";
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+ status = "disabled";
+
+ hlcdc-display-controller {
+ compatible = "atmel,hlcdc-display-controller";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ hlcdc_panel_output: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_input>;
+ };
+ };
+ };
+
+ hlcdc_pwm: hlcdc-pwm {
+ compatible = "atmel,hlcdc-pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_pwm>;
+ #pwm-cells = <3>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
index 678f3cf..75fdfaf 100644
--- a/Documentation/devicetree/bindings/mfd/max77686.txt
+++ b/Documentation/devicetree/bindings/mfd/max77686.txt
@@ -34,6 +34,12 @@
-BUCKn : for BUCKs, where n can lie in range 1 to 9.
example: BUCK1, BUCK5, BUCK9.
+ Regulators which can be turned off during system suspend:
+ -LDOn : 2, 6-8, 10-12, 14-16,
+ -BUCKn : 1-4.
+ Use standard regulator bindings for it ('regulator-off-in-suspend').
+
+
Example:
max77686@09 {
diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt
index 11921cc..01e9f30 100644
--- a/Documentation/devicetree/bindings/mfd/max77693.txt
+++ b/Documentation/devicetree/bindings/mfd/max77693.txt
@@ -27,6 +27,20 @@
[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
+- haptic : The MAX77693 haptic device utilises a PWM controlled motor to provide
+ users with tactile feedback. PWM period and duty-cycle are varied in
+ order to provide the approprite level of feedback.
+
+ Required properties:
+ - compatible : Must be "maxim,max77693-hpatic"
+ - haptic-supply : power supply for the haptic motor
+ [*] refer Documentation/devicetree/bindings/regulator/regulator.txt
+ - pwms : phandle to the physical PWM(Pulse Width Modulation) device.
+ PWM properties should be named "pwms". And number of cell is different
+ for each pwm device.
+ To get more informations, please refer to documentaion.
+ [*] refer Documentation/devicetree/bindings/pwm/pwm.txt
+
Example:
max77693@66 {
compatible = "maxim,max77693";
@@ -52,4 +66,11 @@
regulator-boot-on;
};
};
+
+ haptic {
+ compatible = "maxim,max77693-haptic";
+ haptic-supply = <&haptic_supply>;
+ pwms = <&pwm 0 40000 0>;
+ pwm-names = "haptic";
+ };
};
diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
index 0e4026a..57a0450 100644
--- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
+++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
@@ -1,5 +1,5 @@
-* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator
+* Samsung S2MPS11, S2MPS13, S2MPS14 and S2MPU02 Voltage and Current Regulator
The Samsung S2MPS11 is a multi-function device which includes voltage and
current regulators, RTC, charger controller and other sub-blocks. It is
@@ -7,8 +7,8 @@
addressed by the host system using different I2C slave addresses.
Required properties:
-- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic"
- or "samsung,s2mpu02-pmic".
+- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-pmic"
+ or "samsung,s2mps14-pmic" or "samsung,s2mpu02-pmic".
- reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
Optional properties:
@@ -17,8 +17,8 @@
- interrupts: Interrupt specifiers for interrupt sources.
Optional nodes:
-- clocks: s2mps11 and s5m8767 provide three(AP/CP/BT) buffered 32.768 KHz
- outputs, so to register these as clocks with common clock framework
+- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768
+ KHz outputs, so to register these as clocks with common clock framework
instantiate a sub-node named "clocks". It uses the common clock binding
documented in :
[Documentation/devicetree/bindings/clock/clock-bindings.txt]
@@ -30,12 +30,12 @@
the clock which they consume.
Clock ID Devices
----------------------------------------------------------
- 32KhzAP 0 S2MPS11, S2MPS14, S5M8767
- 32KhzCP 1 S2MPS11, S5M8767
- 32KhzBT 2 S2MPS11, S2MPS14, S5M8767
+ 32KhzAP 0 S2MPS11, S2MPS13, S2MPS14, S5M8767
+ 32KhzCP 1 S2MPS11, S2MPS13, S5M8767
+ 32KhzBT 2 S2MPS11, S2MPS13, S2MPS14, S5M8767
- - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps14-clk",
- "samsung,s5m8767-clk"
+ - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk",
+ "samsung,s2mps14-clk", "samsung,s5m8767-clk"
- regulators: The regulators of s2mps11 that have to be instantiated should be
included in a sub-node named 'regulators'. Regulator nodes included in this
@@ -81,12 +81,14 @@
- LDOn
- valid values for n are:
- S2MPS11: 1 to 38
+ - S2MPS13: 1 to 40
- S2MPS14: 1 to 25
- S2MPU02: 1 to 28
- Example: LDO1, LDO2, LDO28
- BUCKn
- valid values for n are:
- S2MPS11: 1 to 10
+ - S2MPS13: 1 to 10
- S2MPS14: 1 to 5
- S2MPU02: 1 to 7
- Example: BUCK1, BUCK2, BUCK9
diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
index 6cd3525..ee4fc05 100644
--- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
@@ -18,6 +18,10 @@
specific extensions.
- "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420
specific extensions.
+ - "samsung,exynos7-dw-mshc": for controllers with Samsung Exynos7
+ specific extensions.
+ - "samsung,exynos7-dw-mshc-smu": for controllers with Samsung Exynos7
+ specific extensions having an SMU.
* samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface
unit (ciu) clock. This property is applicable only for Exynos5 SoC's and
diff --git a/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt
new file mode 100644
index 0000000..85de99f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt
@@ -0,0 +1,29 @@
+* Imagination specific extensions to the Synopsys Designware Mobile Storage
+ Host Controller
+
+The Synopsys designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the Imagination specific
+extensions to the Synopsys Designware Mobile Storage Host Controller.
+
+Required Properties:
+
+* compatible: should be
+ - "img,pistachio-dw-mshc": for Pistachio SoCs
+
+Example:
+
+ mmc@18142000 {
+ compatible = "img,pistachio-dw-mshc";
+ reg = <0x18142000 0x400>;
+ interrupts = <GIC_SHARED 39 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&system_clk>, <&sdhost_clk>;
+ clock-names = "biu", "ciu";
+
+ fifo-depth = <0x20>;
+ bus-width = <4>;
+ num-slots = <1>;
+ disable-wp;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
index 86223c3..4dd6deb 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
@@ -12,6 +12,10 @@
* for "marvell,armada-380-sdhci", two register areas. The first one
for the SDHCI registers themselves, and the second one for the
AXI/Mbus bridge registers of the SDHCI unit.
+- clocks: Array of clocks required for SDHCI; requires at least one for
+ I/O clock.
+- clock-names: Array of names corresponding to clocks property; shall be
+ "io" for I/O clock and "core" for optional core clock.
Optional properties:
- mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning.
@@ -23,6 +27,8 @@
reg = <0xd4280800 0x800>;
bus-width = <8>;
interrupts = <27>;
+ clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
+ clock-names = "io", "core";
non-removable;
mrvl,clk-delay-cycles = <31>;
};
@@ -32,5 +38,6 @@
reg = <0xd8000 0x1000>, <0xdc000 0x100>;
interrupts = <0 25 0x4>;
clocks = <&gateclk 17>;
+ clock-names = "io";
mrvl,clk-delay-cycles = <0x1F>;
};
diff --git a/Documentation/devicetree/bindings/power/power-controller.txt b/Documentation/devicetree/bindings/power/power-controller.txt
new file mode 100644
index 0000000..4f7a3bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/power-controller.txt
@@ -0,0 +1,18 @@
+* Generic system power control capability
+
+Power-management integrated circuits or miscellaneous hardware components are
+sometimes able to control the system power. The device driver associated with these
+components might need to define this capability, which tells the kernel that
+it can be used to switch off the system. The corresponding device must have the
+standard property "system-power-controller" in its device node. This property
+marks the device as able to control the system power. In order to test if this
+property is found programmatically, use the helper function
+"of_device_is_system_power_controller" from of.h .
+
+Example:
+
+act8846: act8846@5 {
+ compatible = "active-semi,act8846";
+ status = "okay";
+ system-power-controller;
+}
diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
index 865614b..dad6358 100644
--- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
@@ -5,6 +5,10 @@
- compatible: "active-semi,act8846" or "active-semi,act8865"
- reg: I2C slave address
+Optional properties:
+- system-power-controller: Telling whether or not this pmic is controlling
+ the system power. See Documentation/devicetree/bindings/power/power-controller.txt .
+
Any standard regulator properties can be used to configure the single regulator.
The valid names for regulators are:
diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt
index 5aeaffc..79e5476 100644
--- a/Documentation/devicetree/bindings/regulator/max77802.txt
+++ b/Documentation/devicetree/bindings/regulator/max77802.txt
@@ -25,6 +25,29 @@
example: LDO1, LDO2, LDO35.
-BUCKn : for BUCKs, where n can lie in range 1 to 10.
example: BUCK1, BUCK5, BUCK10.
+
+The max77802 regulator supports two different operating modes: Normal and Low
+Power Mode. Some regulators support the modes to be changed at startup or by
+the consumers during normal operation while others only support to change the
+mode during system suspend. The standard regulator suspend states binding can
+be used to configure the regulator operating mode.
+
+The regulators that support the standard "regulator-initial-mode" property,
+changing their mode during normal operation are: LDOs 1, 3, 20 and 21.
+
+The possible values for "regulator-initial-mode" and "regulator-mode" are:
+ 1: Normal regulator voltage output mode.
+ 3: Low Power which reduces the quiescent current down to only 1uA
+
+The list of valid modes are defined in the dt-bindings/clock/maxim,max77802.h
+header and can be included by device tree source files.
+
+The standard "regulator-mode" property can only be used for regulators that
+support changing their mode to Low Power Mode during suspend. These regulators
+are: BUCKs 2-4 and LDOs 1-35. Also, it only takes effect if the regulator has
+been enabled for the given suspend state using "regulator-on-in-suspend" and
+has not been disabled for that state using "regulator-off-in-suspend".
+
Example:
max77802@09 {
@@ -36,11 +59,23 @@
#size-cells = <0>;
regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "vdd_1v0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-initial-mode = <MAX77802_OPMODE_LP>;
+ };
+
ldo11_reg: LDO11 {
regulator-name = "vdd_ldo11";
regulator-min-microvolt = <1900000>;
regulator-max-microvolt = <1900000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <MAX77802_OPMODE_LP>;
+ };
};
buck1_reg: BUCK1 {
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index 8607433..abb26b5 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -19,6 +19,24 @@
design requires. This property describes the total system ramp time
required due to the combination of internal ramping of the regulator itself,
and board design issues such as trace capacitance and load on the supply.
+- regulator-state-mem sub-root node for Suspend-to-RAM mode
+ : suspend to memory, the device goes to sleep, but all data stored in memory,
+ only some external interrupt can wake the device.
+- regulator-state-disk sub-root node for Suspend-to-DISK mode
+ : suspend to disk, this state operates similarly to Suspend-to-RAM,
+ but includes a final step of writing memory contents to disk.
+- regulator-state-[mem/disk] node has following common properties:
+ - regulator-on-in-suspend: regulator should be on in suspend state.
+ - regulator-off-in-suspend: regulator should be off in suspend state.
+ - regulator-suspend-microvolt: regulator should be set to this voltage
+ in suspend.
+ - regulator-mode: operating mode in the given suspend state.
+ The set of possible operating modes depends on the capabilities of
+ every hardware so the valid modes are documented on each regulator
+ device tree binding document.
+- regulator-initial-mode: initial operating mode. The set of possible operating
+ modes depends on the capabilities of every hardware so each device binding
+ documentation explains which values the regulator supports.
Deprecated properties:
- regulator-compatible: If a regulator chip contains multiple
@@ -34,6 +52,10 @@
regulator-max-microvolt = <2500000>;
regulator-always-on;
vin-supply = <&vin>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
Regulator Consumers:
diff --git a/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt b/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt
index 882455e..f9acbc1 100644
--- a/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt
@@ -1,6 +1,7 @@
SKY81452 voltage regulator
Required properties:
+- regulator node named lout.
- any required generic properties defined in regulator.txt
Optional properties:
@@ -9,8 +10,9 @@
Example:
regulator {
- /* generic regulator properties */
- regulator-name = "touch_en";
- regulator-min-microvolt = <4500000>;
- regulator-max-microvolt = <8000000>;
+ lout {
+ regulator-name = "sky81452-lout";
+ regulator-min-microvolt = <4500000>;
+ regulator-max-microvolt = <8000000>;
+ };
};
diff --git a/Documentation/hwmon/lm75 b/Documentation/hwmon/lm75
index c6a5ff1..67691a0a 100644
--- a/Documentation/hwmon/lm75
+++ b/Documentation/hwmon/lm75
@@ -53,6 +53,11 @@
http://www.ti.com/product/tmp75
http://www.ti.com/product/tmp175
http://www.ti.com/product/tmp275
+ * NXP LM75B
+ Prefix: 'lm75b'
+ Addresses scanned: none
+ Datasheet: Publicly available at the NXP website
+ http://www.nxp.com/documents/data_sheet/LM75B.pdf
Author: Frodo Looijaard <frodol@dds.nl>
diff --git a/Documentation/hwmon/lm95234 b/Documentation/hwmon/lm95234
index a0e95dd..32b777e 100644
--- a/Documentation/hwmon/lm95234
+++ b/Documentation/hwmon/lm95234
@@ -2,6 +2,10 @@
=====================
Supported chips:
+ * National Semiconductor / Texas Instruments LM95233
+ Addresses scanned: I2C 0x18, 0x2a, 0x2b
+ Datasheet: Publicly available at the Texas Instruments website
+ http://www.ti.com/product/lm95233
* National Semiconductor / Texas Instruments LM95234
Addresses scanned: I2C 0x18, 0x4d, 0x4e
Datasheet: Publicly available at the Texas Instruments website
@@ -13,11 +17,12 @@
Description
-----------
-LM95234 is an 11-bit digital temperature sensor with a 2-wire System Management
-Bus (SMBus) interface and TrueTherm technology that can very accurately monitor
-the temperature of four remote diodes as well as its own temperature.
-The four remote diodes can be external devices such as microprocessors,
-graphics processors or diode-connected 2N3904s. The LM95234's TruTherm
+LM95233 and LM95234 are 11-bit digital temperature sensors with a 2-wire
+System Management Bus (SMBus) interface and TrueTherm technology
+that can very accurately monitor the temperature of two (LM95233)
+or four (LM95234) remote diodes as well as its own temperature.
+The remote diodes can be external devices such as microprocessors,
+graphics processors or diode-connected 2N3904s. The chip's TruTherm
beta compensation technology allows sensing of 90 nm or 65 nm process
thermal diodes accurately.
diff --git a/Documentation/hwmon/lm95245 b/Documentation/hwmon/lm95245
index 77eaf28..d755901 100644
--- a/Documentation/hwmon/lm95245
+++ b/Documentation/hwmon/lm95245
@@ -2,10 +2,14 @@
==================
Supported chips:
- * National Semiconductor LM95245
+ * TI LM95235
+ Addresses scanned: I2C 0x18, 0x29, 0x4c
+ Datasheet: Publicly available at the TI website
+ http://www.ti.com/lit/ds/symlink/lm95235.pdf
+ * TI / National Semiconductor LM95245
Addresses scanned: I2C 0x18, 0x19, 0x29, 0x4c, 0x4d
- Datasheet: Publicly available at the National Semiconductor website
- http://www.national.com/mpf/LM/LM95245.html
+ Datasheet: Publicly available at the TI website
+ http://www.ti.com/lit/ds/symlink/lm95245.pdf
Author: Alexander Stein <alexander.stein@systec-electronic.com>
@@ -13,10 +17,10 @@
Description
-----------
-The LM95245 is an 11-bit digital temperature sensor with a 2-wire System
+LM95235 and LM95245 are 11-bit digital temperature sensors with a 2-wire System
Management Bus (SMBus) interface and TruTherm technology that can monitor
the temperature of a remote diode as well as its own temperature.
-The LM95245 can be used to very accurately monitor the temperature of
+The chips can be used to very accurately monitor the temperature of
external devices such as microprocessors.
All temperature values are given in millidegrees Celsius. Local temperature
diff --git a/Documentation/hwmon/nct6775 b/Documentation/hwmon/nct6775
index 4e9ef60..f0dd3d2 100644
--- a/Documentation/hwmon/nct6775
+++ b/Documentation/hwmon/nct6775
@@ -8,11 +8,15 @@
=====================
Supported chips:
+ * Nuvoton NCT6102D/NCT6104D/NCT6106D
+ Prefix: 'nct6106'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ Datasheet: Available from the Nuvoton web site
* Nuvoton NCT5572D/NCT6771F/NCT6772F/NCT6775F/W83677HG-I
Prefix: 'nct6775'
Addresses scanned: ISA address retrieved from Super I/O registers
Datasheet: Available from Nuvoton upon request
- * Nuvoton NCT5577D/NCT6776D/NCT6776F
+ * Nuvoton NCT5573D/NCT5577D/NCT6776D/NCT6776F
Prefix: 'nct6776'
Addresses scanned: ISA address retrieved from Super I/O registers
Datasheet: Available from Nuvoton upon request
@@ -20,6 +24,14 @@
Prefix: 'nct6779'
Addresses scanned: ISA address retrieved from Super I/O registers
Datasheet: Available from Nuvoton upon request
+ * Nuvoton NCT6791D
+ Prefix: 'nct6791'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ Datasheet: Available from Nuvoton upon request
+ * Nuvoton NCT6792D
+ Prefix: 'nct6792'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ Datasheet: Available from Nuvoton upon request
Authors:
Guenter Roeck <linux@roeck-us.net>
diff --git a/Documentation/hwmon/nct7802 b/Documentation/hwmon/nct7802
new file mode 100644
index 0000000..2e00f5e
--- /dev/null
+++ b/Documentation/hwmon/nct7802
@@ -0,0 +1,32 @@
+Kernel driver nct7802
+=====================
+
+Supported chips:
+ * Nuvoton NCT7802Y
+ Prefix: 'nct7802'
+ Addresses scanned: I2C 0x28..0x2f
+ Datasheet: Available from Nuvoton web site
+
+Authors:
+ Guenter Roeck <linux@roeck-us.net>
+
+Description
+-----------
+
+This driver implements support for the Nuvoton NCT7802Y hardware monitoring
+chip. NCT7802Y supports 6 temperature sensors, 5 voltage sensors, and 3 fan
+speed sensors.
+
+The chip also supports intelligent fan speed control. This functionality is
+not currently supported by the driver.
+
+Tested Boards and BIOS Versions
+-------------------------------
+
+The driver has been reported to work with the following boards and
+BIOS versions.
+
+Board BIOS version
+---------------------------------------------------------------
+Kontron COMe-bSC2 CHR2E934.001.GGO
+Kontron COMe-bIP2 CCR2E212
diff --git a/Documentation/hwmon/tmp401 b/Documentation/hwmon/tmp401
index f91e3fa..8eb88e9 100644
--- a/Documentation/hwmon/tmp401
+++ b/Documentation/hwmon/tmp401
@@ -18,6 +18,10 @@
Prefix: 'tmp432'
Addresses scanned: I2C 0x4c, 0x4d
Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp432.html
+ * Texas Instruments TMP435
+ Prefix: 'tmp435'
+ Addresses scanned: I2C 0x37, 0x48 - 0x4f
+ Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp435.html
Authors:
Hans de Goede <hdegoede@redhat.com>
@@ -27,8 +31,8 @@
-----------
This driver implements support for Texas Instruments TMP401, TMP411,
-TMP431, and TMP432 chips. These chips implement one or two remote and
-one local temperature sensors. Temperature is measured in degrees
+TMP431, TMP432 and TMP435 chips. These chips implement one or two remote
+and one local temperature sensors. Temperature is measured in degrees
Celsius. Resolution of the remote sensor is 0.0625 degree. Local
sensor resolution can be set to 0.5, 0.25, 0.125 or 0.0625 degree (not
supported by the driver so far, so using the default resolution of 0.5
diff --git a/MAINTAINERS b/MAINTAINERS
index 7a95dc1..8ef028d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1828,7 +1828,7 @@
F: net/ax25/
AZ6007 DVB DRIVER
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
@@ -2198,7 +2198,7 @@
F: fs/btrfs/
BTTV VIDEO4LINUX DRIVER
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
@@ -2719,7 +2719,7 @@
F: include/media/cx2341x*
CX88 VIDEO4LINUX DRIVER
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
@@ -3401,7 +3401,7 @@
EDAC-CORE
M: Doug Thompson <dougthompson@xmission.com>
M: Borislav Petkov <bp@alien8.de>
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-edac@vger.kernel.org
W: bluesmoke.sourceforge.net
S: Supported
@@ -3450,7 +3450,7 @@
F: drivers/edac/e7xxx_edac.c
EDAC-GHES
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-edac@vger.kernel.org
W: bluesmoke.sourceforge.net
S: Maintained
@@ -3478,21 +3478,21 @@
F: drivers/edac/i5000_edac.c
EDAC-I5400
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-edac@vger.kernel.org
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i5400_edac.c
EDAC-I7300
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-edac@vger.kernel.org
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i7300_edac.c
EDAC-I7CORE
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-edac@vger.kernel.org
W: bluesmoke.sourceforge.net
S: Maintained
@@ -3535,7 +3535,7 @@
F: drivers/edac/r82600_edac.c
EDAC-SBRIDGE
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-edac@vger.kernel.org
W: bluesmoke.sourceforge.net
S: Maintained
@@ -3595,7 +3595,7 @@
F: drivers/net/ethernet/ibm/ehea/
EM28XX VIDEO4LINUX DRIVER
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
@@ -5961,7 +5961,7 @@
F: drivers/media/radio/radio-maxiradio*
MEDIA INPUT INFRASTRUCTURE (V4L/DVB)
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
P: LinuxTV.org Project
L: linux-media@vger.kernel.org
W: http://linuxtv.org
@@ -8014,7 +8014,7 @@
F: drivers/media/i2c/saa6588*
SAA7134 VIDEO4LINUX DRIVER
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
@@ -8472,7 +8472,7 @@
F: drivers/media/radio/si4713/radio-usb-si4713.c
SIANO DVB DRIVER
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
@@ -8683,7 +8683,9 @@
F: drivers/leds/leds-net48xx.c
SOFTLOGIC 6x10 MPEG CODEC
-M: Ismael Luceno <ismael.luceno@corp.bluecherry.net>
+M: Bluecherry Maintainers <maintainers@bluecherrydvr.com>
+M: Andrey Utkin <andrey.utkin@corp.bluecherry.net>
+M: Andrey Utkin <andrey.krieger.utkin@gmail.com>
L: linux-media@vger.kernel.org
S: Supported
F: drivers/media/pci/solo6x10/
@@ -9157,7 +9159,7 @@
F: drivers/media/i2c/tda9840*
TEA5761 TUNER DRIVER
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
@@ -9165,7 +9167,7 @@
F: drivers/media/tuners/tea5761.*
TEA5767 TUNER DRIVER
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
@@ -9477,7 +9479,7 @@
F: mm/shmem.c
TM6000 VIDEO4LINUX DRIVER
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
@@ -10298,7 +10300,7 @@
F: arch/x86/kernel/cpu/mcheck/*
XC2028/3028 TUNER DRIVER
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
diff --git a/Makefile b/Makefile
index ce70361..fd80c6e 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 18
SUBLEVEL = 0
-EXTRAVERSION = -rc7
+EXTRAVERSION =
NAME = Diseased Newt
# *DOCUMENTATION*
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 21ab782..06ecbaf 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -19,6 +19,7 @@
#include <linux/i2c-gpio.h>
#include <linux/atmel-mci.h>
#include <linux/platform_data/crypto-atmel.h>
+#include <linux/platform_data/mmc-atmel-mci.h>
#include <linux/platform_data/at91_adc.h>
@@ -30,7 +31,6 @@
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
#include <linux/platform_data/dma-atmel.h>
-#include <mach/atmel-mci.h>
#include <mach/hardware.h>
#include <media/atmel-isi.h>
diff --git a/arch/arm/mach-at91/include/mach/atmel-mci.h b/arch/arm/mach-at91/include/mach/atmel-mci.h
deleted file mode 100644
index 3069e41..0000000
--- a/arch/arm/mach-at91/include/mach/atmel-mci.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __MACH_ATMEL_MCI_H
-#define __MACH_ATMEL_MCI_H
-
-#include <linux/platform_data/dma-atmel.h>
-
-/**
- * struct mci_dma_data - DMA data for MCI interface
- */
-struct mci_dma_data {
- struct at_dma_slave sdata;
-};
-
-/* accessor macros */
-#define slave_data_ptr(s) (&(s)->sdata)
-#define find_slave_dev(s) ((s)->sdata.dma_dev)
-
-#endif /* __MACH_ATMEL_MCI_H */
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 97767a2..e0ad64f 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -21,8 +21,10 @@
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/usb/musb.h>
+#include <linux/mmc/host.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
+#include <linux/platform_data/mmc-omap.h>
#include <linux/mfd/menelaus.h>
#include <sound/tlv320aic3x.h>
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index ddfc8df..3d5040f 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -484,7 +484,7 @@
* Current flows to eMMC when eMMC is off and the data lines are pulled up,
* so pull them down. N.B. we pull 8 lines because we are using 8 lines.
*/
-static void rx51_mmc2_remux(struct device *dev, int slot, int power_on)
+static void rx51_mmc2_remux(struct device *dev, int power_on)
{
if (power_on)
omap_mux_write_array(partition, rx51_mmc2_on_mux);
@@ -500,7 +500,6 @@
.cover_only = true,
.gpio_cd = 160,
.gpio_wp = -EINVAL,
- .power_saving = true,
},
{
.name = "internal",
@@ -510,7 +509,6 @@
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.nonremovable = true,
- .power_saving = true,
.remux = rx51_mmc2_remux,
},
{} /* Terminator */
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 07d4c7b..dc6e79c 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -14,14 +14,15 @@
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/mmc/host.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include "soc.h"
#include "omap_device.h"
#include "omap-pm.h"
#include "mux.h"
-#include "mmc.h"
#include "hsmmc.h"
#include "control.h"
@@ -32,25 +33,14 @@
#define HSMMC_NAME_LEN 9
-#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
-
-static int hsmmc_get_context_loss(struct device *dev)
-{
- return omap_pm_get_dev_context_loss_count(dev);
-}
-
-#else
-#define hsmmc_get_context_loss NULL
-#endif
-
-static void omap_hsmmc1_before_set_reg(struct device *dev, int slot,
- int power_on, int vdd)
+static void omap_hsmmc1_before_set_reg(struct device *dev,
+ int power_on, int vdd)
{
u32 reg, prog_io;
- struct omap_mmc_platform_data *mmc = dev->platform_data;
+ struct omap_hsmmc_platform_data *mmc = dev->platform_data;
- if (mmc->slots[0].remux)
- mmc->slots[0].remux(dev, slot, power_on);
+ if (mmc->remux)
+ mmc->remux(dev, power_on);
/*
* Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
@@ -72,7 +62,7 @@
omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1);
}
- if (mmc->slots[0].internal_clock) {
+ if (mmc->internal_clock) {
reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
reg |= OMAP2_MMCSDIO1ADPCLKISEL;
omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
@@ -96,8 +86,7 @@
}
}
-static void omap_hsmmc1_after_set_reg(struct device *dev, int slot,
- int power_on, int vdd)
+static void omap_hsmmc1_after_set_reg(struct device *dev, int power_on, int vdd)
{
u32 reg;
@@ -120,34 +109,32 @@
}
}
-static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc)
+static void hsmmc2_select_input_clk_src(struct omap_hsmmc_platform_data *mmc)
{
u32 reg;
reg = omap_ctrl_readl(control_devconf1_offset);
- if (mmc->slots[0].internal_clock)
+ if (mmc->internal_clock)
reg |= OMAP2_MMCSDIO2ADPCLKISEL;
else
reg &= ~OMAP2_MMCSDIO2ADPCLKISEL;
omap_ctrl_writel(reg, control_devconf1_offset);
}
-static void hsmmc2_before_set_reg(struct device *dev, int slot,
- int power_on, int vdd)
+static void hsmmc2_before_set_reg(struct device *dev, int power_on, int vdd)
{
- struct omap_mmc_platform_data *mmc = dev->platform_data;
+ struct omap_hsmmc_platform_data *mmc = dev->platform_data;
- if (mmc->slots[0].remux)
- mmc->slots[0].remux(dev, slot, power_on);
+ if (mmc->remux)
+ mmc->remux(dev, power_on);
if (power_on)
hsmmc2_select_input_clk_src(mmc);
}
-static int am35x_hsmmc2_set_power(struct device *dev, int slot,
- int power_on, int vdd)
+static int am35x_hsmmc2_set_power(struct device *dev, int power_on, int vdd)
{
- struct omap_mmc_platform_data *mmc = dev->platform_data;
+ struct omap_hsmmc_platform_data *mmc = dev->platform_data;
if (power_on)
hsmmc2_select_input_clk_src(mmc);
@@ -155,23 +142,22 @@
return 0;
}
-static int nop_mmc_set_power(struct device *dev, int slot, int power_on,
- int vdd)
+static int nop_mmc_set_power(struct device *dev, int power_on, int vdd)
{
return 0;
}
-static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
- int controller_nr)
+static inline void omap_hsmmc_mux(struct omap_hsmmc_platform_data
+ *mmc_controller, int controller_nr)
{
- if (gpio_is_valid(mmc_controller->slots[0].switch_pin) &&
- (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
- omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
- OMAP_PIN_INPUT_PULLUP);
- if (gpio_is_valid(mmc_controller->slots[0].gpio_wp) &&
- (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
- omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
- OMAP_PIN_INPUT_PULLUP);
+ if (gpio_is_valid(mmc_controller->switch_pin) &&
+ (mmc_controller->switch_pin < OMAP_MAX_GPIO_LINES))
+ omap_mux_init_gpio(mmc_controller->switch_pin,
+ OMAP_PIN_INPUT_PULLUP);
+ if (gpio_is_valid(mmc_controller->gpio_wp) &&
+ (mmc_controller->gpio_wp < OMAP_MAX_GPIO_LINES))
+ omap_mux_init_gpio(mmc_controller->gpio_wp,
+ OMAP_PIN_INPUT_PULLUP);
if (cpu_is_omap34xx()) {
if (controller_nr == 0) {
omap_mux_init_signal("sdmmc1_clk",
@@ -180,7 +166,7 @@
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat0",
OMAP_PIN_INPUT_PULLUP);
- if (mmc_controller->slots[0].caps &
+ if (mmc_controller->caps &
(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
omap_mux_init_signal("sdmmc1_dat1",
OMAP_PIN_INPUT_PULLUP);
@@ -189,7 +175,7 @@
omap_mux_init_signal("sdmmc1_dat3",
OMAP_PIN_INPUT_PULLUP);
}
- if (mmc_controller->slots[0].caps &
+ if (mmc_controller->caps &
MMC_CAP_8_BIT_DATA) {
omap_mux_init_signal("sdmmc1_dat4",
OMAP_PIN_INPUT_PULLUP);
@@ -214,7 +200,7 @@
* For 8 wire configurations, Lines DAT4, 5, 6 and 7
* need to be muxed in the board-*.c files
*/
- if (mmc_controller->slots[0].caps &
+ if (mmc_controller->caps &
(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
omap_mux_init_signal("sdmmc2_dat1",
OMAP_PIN_INPUT_PULLUP);
@@ -223,7 +209,7 @@
omap_mux_init_signal("sdmmc2_dat3",
OMAP_PIN_INPUT_PULLUP);
}
- if (mmc_controller->slots[0].caps &
+ if (mmc_controller->caps &
MMC_CAP_8_BIT_DATA) {
omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
OMAP_PIN_INPUT_PULLUP);
@@ -243,7 +229,7 @@
}
static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
- struct omap_mmc_platform_data *mmc)
+ struct omap_hsmmc_platform_data *mmc)
{
char *hc_name;
@@ -259,38 +245,22 @@
else
snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i",
c->mmc, 1);
- mmc->slots[0].name = hc_name;
- mmc->nr_slots = 1;
- mmc->slots[0].caps = c->caps;
- mmc->slots[0].pm_caps = c->pm_caps;
- mmc->slots[0].internal_clock = !c->ext_clock;
- mmc->max_freq = c->max_freq;
+ mmc->name = hc_name;
+ mmc->caps = c->caps;
+ mmc->internal_clock = !c->ext_clock;
mmc->reg_offset = 0;
- mmc->get_context_loss_count = hsmmc_get_context_loss;
- mmc->slots[0].switch_pin = c->gpio_cd;
- mmc->slots[0].gpio_wp = c->gpio_wp;
+ mmc->switch_pin = c->gpio_cd;
+ mmc->gpio_wp = c->gpio_wp;
- mmc->slots[0].remux = c->remux;
- mmc->slots[0].init_card = c->init_card;
+ mmc->remux = c->remux;
+ mmc->init_card = c->init_card;
if (c->cover_only)
- mmc->slots[0].cover = 1;
+ mmc->cover = 1;
if (c->nonremovable)
- mmc->slots[0].nonremovable = 1;
-
- if (c->power_saving)
- mmc->slots[0].power_saving = 1;
-
- if (c->no_off)
- mmc->slots[0].no_off = 1;
-
- if (c->no_off_init)
- mmc->slots[0].no_regulator_off_init = c->no_off_init;
-
- if (c->vcc_aux_disable_is_sleep)
- mmc->slots[0].vcc_aux_disable_is_sleep = 1;
+ mmc->nonremovable = 1;
/*
* NOTE: MMC slots should have a Vcc regulator set up.
@@ -300,42 +270,42 @@
* temporary HACK: ocr_mask instead of fixed supply
*/
if (soc_is_am35xx())
- mmc->slots[0].ocr_mask = MMC_VDD_165_195 |
+ mmc->ocr_mask = MMC_VDD_165_195 |
MMC_VDD_26_27 |
MMC_VDD_27_28 |
MMC_VDD_29_30 |
MMC_VDD_30_31 |
MMC_VDD_31_32;
else
- mmc->slots[0].ocr_mask = c->ocr_mask;
+ mmc->ocr_mask = c->ocr_mask;
if (!soc_is_am35xx())
- mmc->slots[0].features |= HSMMC_HAS_PBIAS;
+ mmc->features |= HSMMC_HAS_PBIAS;
switch (c->mmc) {
case 1:
- if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
+ if (mmc->features & HSMMC_HAS_PBIAS) {
/* on-chip level shifting via PBIAS0/PBIAS1 */
- mmc->slots[0].before_set_reg =
+ mmc->before_set_reg =
omap_hsmmc1_before_set_reg;
- mmc->slots[0].after_set_reg =
+ mmc->after_set_reg =
omap_hsmmc1_after_set_reg;
}
if (soc_is_am35xx())
- mmc->slots[0].set_power = nop_mmc_set_power;
+ mmc->set_power = nop_mmc_set_power;
/* OMAP3630 HSMMC1 supports only 4-bit */
if (cpu_is_omap3630() &&
(c->caps & MMC_CAP_8_BIT_DATA)) {
c->caps &= ~MMC_CAP_8_BIT_DATA;
c->caps |= MMC_CAP_4_BIT_DATA;
- mmc->slots[0].caps = c->caps;
+ mmc->caps = c->caps;
}
break;
case 2:
if (soc_is_am35xx())
- mmc->slots[0].set_power = am35x_hsmmc2_set_power;
+ mmc->set_power = am35x_hsmmc2_set_power;
if (c->ext_clock)
c->transceiver = 1;
@@ -343,17 +313,17 @@
c->caps &= ~MMC_CAP_8_BIT_DATA;
c->caps |= MMC_CAP_4_BIT_DATA;
}
- if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
+ if (mmc->features & HSMMC_HAS_PBIAS) {
/* off-chip level shifting, or none */
- mmc->slots[0].before_set_reg = hsmmc2_before_set_reg;
- mmc->slots[0].after_set_reg = NULL;
+ mmc->before_set_reg = hsmmc2_before_set_reg;
+ mmc->after_set_reg = NULL;
}
break;
case 3:
case 4:
case 5:
- mmc->slots[0].before_set_reg = NULL;
- mmc->slots[0].after_set_reg = NULL;
+ mmc->before_set_reg = NULL;
+ mmc->after_set_reg = NULL;
break;
default:
pr_err("MMC%d configuration not supported!\n", c->mmc);
@@ -368,7 +338,7 @@
void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
{
struct platform_device *pdev;
- struct omap_mmc_platform_data *mmc_pdata;
+ struct omap_hsmmc_platform_data *mmc_pdata;
int res;
if (omap_hsmmc_done != 1)
@@ -388,8 +358,8 @@
if (!mmc_pdata)
continue;
- mmc_pdata->slots[0].switch_pin = c->gpio_cd;
- mmc_pdata->slots[0].gpio_wp = c->gpio_wp;
+ mmc_pdata->switch_pin = c->gpio_cd;
+ mmc_pdata->gpio_wp = c->gpio_wp;
res = omap_device_register(pdev);
if (res)
@@ -408,12 +378,12 @@
struct omap_device *od;
struct platform_device *pdev;
char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN];
- struct omap_mmc_platform_data *mmc_data;
- struct omap_mmc_dev_attr *mmc_dev_attr;
+ struct omap_hsmmc_platform_data *mmc_data;
+ struct omap_hsmmc_dev_attr *mmc_dev_attr;
char *name;
int res;
- mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
+ mmc_data = kzalloc(sizeof(*mmc_data), GFP_KERNEL);
if (!mmc_data) {
pr_err("Cannot allocate memory for mmc device!\n");
return;
@@ -463,7 +433,7 @@
}
res = platform_device_add_data(pdev, mmc_data,
- sizeof(struct omap_mmc_platform_data));
+ sizeof(struct omap_hsmmc_platform_data));
if (res) {
pr_err("Could not add pdata for %s\n", name);
goto put_pdev;
@@ -489,7 +459,7 @@
platform_device_put(pdev);
free_name:
- kfree(mmc_data->slots[0].name);
+ kfree(mmc_data->name);
free_mmc:
kfree(mmc_data);
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
index 7f2e790..148cd9b 100644
--- a/arch/arm/mach-omap2/hsmmc.h
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -12,25 +12,18 @@
u8 mmc; /* controller 1/2/3 */
u32 caps; /* 4/8 wires and any additional host
* capabilities OR'd (ref. linux/mmc/host.h) */
- u32 pm_caps; /* PM capabilities */
bool transceiver; /* MMC-2 option */
bool ext_clock; /* use external pin for input clock */
bool cover_only; /* No card detect - just cover switch */
bool nonremovable; /* Nonremovable e.g. eMMC */
- bool power_saving; /* Try to sleep or power off when possible */
- bool no_off; /* power_saving and power is not to go off */
- bool no_off_init; /* no power off when not in MMC sleep state */
- bool vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */
bool deferred; /* mmc needs a deferred probe */
int gpio_cd; /* or -EINVAL */
int gpio_wp; /* or -EINVAL */
char *name; /* or NULL for default */
struct platform_device *pdev; /* mmc controller instance */
int ocr_mask; /* temporary HACK */
- int max_freq; /* maximum clock, if constrained by external
- * circuitry, or 0 for default */
/* Remux (pad configuration) when powering on/off */
- void (*remux)(struct device *dev, int slot, int power_on);
+ void (*remux)(struct device *dev, int power_on);
/* init some special card */
void (*init_card)(struct mmc_card *card);
};
diff --git a/arch/arm/mach-omap2/mmc.h b/arch/arm/mach-omap2/mmc.h
index 0cd4b08..30d39b9 100644
--- a/arch/arm/mach-omap2/mmc.h
+++ b/arch/arm/mach-omap2/mmc.h
@@ -1,5 +1,3 @@
-#include <linux/mmc/host.h>
-#include <linux/platform_data/mmc-omap.h>
#define OMAP24XX_NR_MMC 2
#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE
@@ -7,14 +5,6 @@
#define OMAP4_MMC_REG_OFFSET 0x100
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
-#else
-static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
-{
-}
-#endif
-
struct omap_hwmod;
int omap_msdi_reset(struct omap_hwmod *oh);
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 16b20ce..b7cb44a 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -36,7 +36,6 @@
#include "soc.h"
#include "iomap.h"
#include "common.h"
-#include "mmc.h"
#include "prminst44xx.h"
#include "prcm_mpu44xx.h"
#include "omap4-sar-layout.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index c2555cb..79127b3 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -15,12 +15,12 @@
#include <linux/i2c-omap.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/omap-dma.h>
#include <plat/dmtimer.h>
#include "omap_hwmod.h"
-#include "mmc.h"
#include "l3_2xxx.h"
#include "soc.h"
@@ -372,7 +372,7 @@
{ .role = "dbck", .clk = "mmchsdb1_fck" },
};
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index a579b89..cabc569 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -15,10 +15,10 @@
*/
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include "omap_hwmod.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
#include "cm33xx.h"
#include "prm33xx.h"
@@ -836,7 +836,7 @@
};
/* mmc0 */
-static struct omap_mmc_dev_attr am33xx_mmc0_dev_attr = {
+static struct omap_hsmmc_dev_attr am33xx_mmc0_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
@@ -854,7 +854,7 @@
};
/* mmc1 */
-static struct omap_mmc_dev_attr am33xx_mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr am33xx_mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
@@ -872,7 +872,7 @@
};
/* mmc2 */
-static struct omap_mmc_dev_attr am33xx_mmc2_dev_attr = {
+static struct omap_hsmmc_dev_attr am33xx_mmc2_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
struct omap_hwmod am33xx_mmc2_hwmod = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 6b406ca..0cf7b56 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -27,7 +27,6 @@
#include "prm33xx.h"
#include "prm-regbits-33xx.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
#include "omap_hwmod_33xx_43xx_common_data.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 2a78b09..11468ee 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -18,6 +18,7 @@
#include <linux/i2c-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include <linux/omap-dma.h>
#include "l3_3xxx.h"
@@ -37,7 +38,6 @@
#include "cm-regbits-34xx.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
#include "serial.h"
@@ -1786,12 +1786,12 @@
{ .role = "dbck", .clk = "omap_32k_fck", },
};
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
/* See 35xx errata 2.1.1.128 in SPRZ278F */
-static struct omap_mmc_dev_attr mmc1_pre_es3_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_pre_es3_dev_attr = {
.flags = (OMAP_HSMMC_SUPPORTS_DUAL_VOLT |
OMAP_HSMMC_BROKEN_MULTIBLOCK_READ),
};
@@ -1854,7 +1854,7 @@
};
/* See 35xx errata 2.1.1.128 in SPRZ278F */
-static struct omap_mmc_dev_attr mmc2_pre_es3_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc2_pre_es3_dev_attr = {
.flags = OMAP_HSMMC_BROKEN_MULTIBLOCK_READ,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 44e5634..d8a3cf1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -22,6 +22,7 @@
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/i2c-omap.h>
@@ -39,7 +40,6 @@
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
/* Base offset for all OMAP4 interrupts external to MPUSS */
@@ -1952,7 +1952,7 @@
};
/* mmc1 dev_attr */
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index 1103aa0..5ec786a 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -19,6 +19,7 @@
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/i2c-omap.h>
@@ -33,7 +34,6 @@
#include "cm2_54xx.h"
#include "prm54xx.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
/* Base offset for all OMAP5 interrupts external to MPUSS */
@@ -1269,7 +1269,7 @@
};
/* mmc1 dev_attr */
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 5684f11..711c97e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -19,6 +19,7 @@
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/i2c-omap.h>
@@ -33,7 +34,6 @@
#include "cm2_7xx.h"
#include "prm7xx.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
#include "soc.h"
@@ -1301,7 +1301,7 @@
};
/* mmc1 dev_attr */
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 37b7560..cc92cdb 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -17,7 +17,7 @@
#include <linux/spi/spi.h>
#include <linux/usb/atmel_usba_udc.h>
-#include <mach/atmel-mci.h>
+#include <linux/platform_data/mmc-atmel-mci.h>
#include <linux/atmel-mci.h>
#include <asm/io.h>
diff --git a/arch/avr32/mach-at32ap/include/mach/atmel-mci.h b/arch/avr32/mach-at32ap/include/mach/atmel-mci.h
deleted file mode 100644
index 11d7f4b..0000000
--- a/arch/avr32/mach-at32ap/include/mach/atmel-mci.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __MACH_ATMEL_MCI_H
-#define __MACH_ATMEL_MCI_H
-
-#include <linux/platform_data/dma-dw.h>
-
-/**
- * struct mci_dma_data - DMA data for MCI interface
- */
-struct mci_dma_data {
- struct dw_dma_slave sdata;
-};
-
-/* accessor macros */
-#define slave_data_ptr(s) (&(s)->sdata)
-#define find_slave_dev(s) ((s)->sdata.dma_dev)
-
-#endif /* __MACH_ATMEL_MCI_H */
diff --git a/arch/powerpc/platforms/powernv/opal-sensor.c b/arch/powerpc/platforms/powernv/opal-sensor.c
index 10271ad..4ab67ef 100644
--- a/arch/powerpc/platforms/powernv/opal-sensor.c
+++ b/arch/powerpc/platforms/powernv/opal-sensor.c
@@ -20,7 +20,9 @@
#include <linux/delay.h>
#include <linux/mutex.h>
+#include <linux/of_platform.h>
#include <asm/opal.h>
+#include <asm/machdep.h>
static DEFINE_MUTEX(opal_sensor_mutex);
@@ -64,3 +66,21 @@
return ret;
}
EXPORT_SYMBOL_GPL(opal_get_sensor_data);
+
+static __init int opal_sensor_init(void)
+{
+ struct platform_device *pdev;
+ struct device_node *sensor;
+
+ sensor = of_find_node_by_path("/ibm,opal/sensors");
+ if (!sensor) {
+ pr_err("Opal node 'sensors' not found\n");
+ return -ENODEV;
+ }
+
+ pdev = of_platform_device_create(sensor, "opal-sensor", NULL);
+ of_node_put(sensor);
+
+ return PTR_ERR_OR_ZERO(pdev);
+}
+machine_subsys_initcall(powernv, opal_sensor_init);
diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c
index dd1c24c..3f51cf4 100644
--- a/arch/s390/kernel/nmi.c
+++ b/arch/s390/kernel/nmi.c
@@ -54,12 +54,8 @@
*/
local_irq_save(flags);
local_mcck_disable();
- /*
- * Ummm... Does this make sense at all? Copying the percpu struct
- * and then zapping it one statement later?
- */
- memcpy(&mcck, this_cpu_ptr(&cpu_mcck), sizeof(mcck));
- memset(&mcck, 0, sizeof(struct mcck_struct));
+ mcck = *this_cpu_ptr(&cpu_mcck);
+ memset(this_cpu_ptr(&cpu_mcck), 0, sizeof(mcck));
clear_cpu_flag(CIF_MCCK_PENDING);
local_mcck_enable();
local_irq_restore(flags);
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index be1e07d..45abc36 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -76,7 +76,7 @@
suffix-$(CONFIG_KERNEL_LZO) := lzo
suffix-$(CONFIG_KERNEL_LZ4) := lz4
-RUN_SIZE = $(shell objdump -h vmlinux | \
+RUN_SIZE = $(shell $(OBJDUMP) -h vmlinux | \
perl $(srctree)/arch/x86/tools/calc_run_size.pl)
quiet_cmd_mkpiggy = MKPIGGY $@
cmd_mkpiggy = $(obj)/mkpiggy $< $(RUN_SIZE) > $@ || ( rm -f $@ ; false )
diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c
index f04dbb3..5caed1d 100644
--- a/arch/x86/kernel/amd_nb.c
+++ b/arch/x86/kernel/amd_nb.c
@@ -21,6 +21,7 @@
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F3) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_M10H_F3) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F3) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_M60H_NB_F3) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F3) },
{}
@@ -30,6 +31,7 @@
static const struct pci_device_id amd_nb_link_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F4) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_M60H_NB_F4) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F4) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F4) },
{}
diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
index 2ce9051..08fe6e8 100644
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -465,6 +465,7 @@
if (uci->valid && uci->mc)
microcode_ops->apply_microcode(cpu);
+#ifdef CONFIG_X86_64
else if (!uci->mc)
/*
* We might resume and not have applied late microcode but still
@@ -473,6 +474,7 @@
* applying patches early on the APs.
*/
load_ucode_ap();
+#endif
}
static struct syscore_ops mc_syscore_ops = {
diff --git a/block/bio-integrity.c b/block/bio-integrity.c
index 0984232..5cbd5d9 100644
--- a/block/bio-integrity.c
+++ b/block/bio-integrity.c
@@ -216,9 +216,10 @@
{
struct blk_integrity *bi = bdev_get_integrity(bio->bi_bdev);
struct blk_integrity_iter iter;
- struct bio_vec *bv;
+ struct bvec_iter bviter;
+ struct bio_vec bv;
struct bio_integrity_payload *bip = bio_integrity(bio);
- unsigned int i, ret = 0;
+ unsigned int ret = 0;
void *prot_buf = page_address(bip->bip_vec->bv_page) +
bip->bip_vec->bv_offset;
@@ -227,11 +228,11 @@
iter.seed = bip_get_seed(bip);
iter.prot_buf = prot_buf;
- bio_for_each_segment_all(bv, bio, i) {
- void *kaddr = kmap_atomic(bv->bv_page);
+ bio_for_each_segment(bv, bio, bviter) {
+ void *kaddr = kmap_atomic(bv.bv_page);
- iter.data_buf = kaddr + bv->bv_offset;
- iter.data_size = bv->bv_len;
+ iter.data_buf = kaddr + bv.bv_offset;
+ iter.data_size = bv.bv_len;
ret = proc_fn(&iter);
if (ret) {
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 807a88a..9d75ead 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -1164,7 +1164,8 @@
return true;
for (i = 0; i < video->attached_count; i++) {
- if (video->attached_array[i].bind_info == device)
+ if ((video->attached_array[i].value.int_val & 0xfff) ==
+ (device->device_id & 0xfff))
return true;
}
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index e45f837..49f1e68 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -321,6 +321,9 @@
{ PCI_VDEVICE(INTEL, 0x8c87), board_ahci }, /* 9 Series RAID */
{ PCI_VDEVICE(INTEL, 0x8c8e), board_ahci }, /* 9 Series RAID */
{ PCI_VDEVICE(INTEL, 0x8c8f), board_ahci }, /* 9 Series RAID */
+ { PCI_VDEVICE(INTEL, 0x9d03), board_ahci }, /* Sunrise Point-LP AHCI */
+ { PCI_VDEVICE(INTEL, 0x9d05), board_ahci }, /* Sunrise Point-LP RAID */
+ { PCI_VDEVICE(INTEL, 0x9d07), board_ahci }, /* Sunrise Point-LP RAID */
{ PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H AHCI */
{ PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H RAID */
{ PCI_VDEVICE(INTEL, 0xa105), board_ahci }, /* Sunrise Point-H RAID */
@@ -492,6 +495,7 @@
* enabled. https://bugzilla.kernel.org/show_bug.cgi?id=60731
*/
{ PCI_VDEVICE(SAMSUNG, 0x1600), board_ahci_nomsi },
+ { PCI_VDEVICE(SAMSUNG, 0xa800), board_ahci_nomsi },
/* Enmotus */
{ PCI_DEVICE(0x1c44, 0x8000), board_ahci },
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 07bc7e4..6507159 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -1488,7 +1488,7 @@
host_priv->csr_base = csr_base;
irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
- if (irq < 0) {
+ if (!irq) {
dev_err(&ofdev->dev, "invalid irq from platform\n");
goto error_exit_with_cleanup;
}
diff --git a/drivers/base/regmap/Kconfig b/drivers/base/regmap/Kconfig
index 8a3f51f..db9d00c3 100644
--- a/drivers/base/regmap/Kconfig
+++ b/drivers/base/regmap/Kconfig
@@ -3,12 +3,15 @@
# subsystems should select the appropriate symbols.
config REGMAP
- default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_MMIO || REGMAP_IRQ)
+ default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ)
select LZO_COMPRESS
select LZO_DECOMPRESS
select IRQ_DOMAIN if REGMAP_IRQ
bool
+config REGMAP_AC97
+ tristate
+
config REGMAP_I2C
tristate
depends on I2C
diff --git a/drivers/base/regmap/Makefile b/drivers/base/regmap/Makefile
index a7c670b..0a53365 100644
--- a/drivers/base/regmap/Makefile
+++ b/drivers/base/regmap/Makefile
@@ -1,6 +1,7 @@
obj-$(CONFIG_REGMAP) += regmap.o regcache.o
obj-$(CONFIG_REGMAP) += regcache-rbtree.o regcache-lzo.o regcache-flat.o
obj-$(CONFIG_DEBUG_FS) += regmap-debugfs.o
+obj-$(CONFIG_REGMAP_AC97) += regmap-ac97.o
obj-$(CONFIG_REGMAP_I2C) += regmap-i2c.o
obj-$(CONFIG_REGMAP_SPI) += regmap-spi.o
obj-$(CONFIG_REGMAP_SPMI) += regmap-spmi.o
diff --git a/drivers/base/regmap/regcache-flat.c b/drivers/base/regmap/regcache-flat.c
index d9762e4..0246f44 100644
--- a/drivers/base/regmap/regcache-flat.c
+++ b/drivers/base/regmap/regcache-flat.c
@@ -10,9 +10,9 @@
* published by the Free Software Foundation.
*/
-#include <linux/slab.h>
#include <linux/device.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include "internal.h"
diff --git a/drivers/base/regmap/regcache-lzo.c b/drivers/base/regmap/regcache-lzo.c
index e210a6d..2d53f6f 100644
--- a/drivers/base/regmap/regcache-lzo.c
+++ b/drivers/base/regmap/regcache-lzo.c
@@ -10,9 +10,9 @@
* published by the Free Software Foundation.
*/
-#include <linux/slab.h>
#include <linux/device.h>
#include <linux/lzo.h>
+#include <linux/slab.h>
#include "internal.h"
diff --git a/drivers/base/regmap/regcache-rbtree.c b/drivers/base/regmap/regcache-rbtree.c
index f3e8fe0..d453a2c 100644
--- a/drivers/base/regmap/regcache-rbtree.c
+++ b/drivers/base/regmap/regcache-rbtree.c
@@ -10,11 +10,11 @@
* published by the Free Software Foundation.
*/
-#include <linux/slab.h>
-#include <linux/device.h>
#include <linux/debugfs.h>
+#include <linux/device.h>
#include <linux/rbtree.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include "internal.h"
diff --git a/drivers/base/regmap/regcache.c b/drivers/base/regmap/regcache.c
index f1280dc..f373c35 100644
--- a/drivers/base/regmap/regcache.c
+++ b/drivers/base/regmap/regcache.c
@@ -10,12 +10,12 @@
* published by the Free Software Foundation.
*/
-#include <linux/slab.h>
-#include <linux/export.h>
-#include <linux/device.h>
-#include <trace/events/regmap.h>
#include <linux/bsearch.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/slab.h>
#include <linux/sort.h>
+#include <trace/events/regmap.h>
#include "internal.h"
@@ -36,6 +36,23 @@
if (!map->num_reg_defaults_raw)
return -EINVAL;
+ /* calculate the size of reg_defaults */
+ for (count = 0, i = 0; i < map->num_reg_defaults_raw; i++)
+ if (!regmap_volatile(map, i * map->reg_stride))
+ count++;
+
+ /* all registers are volatile, so just bypass */
+ if (!count) {
+ map->cache_bypass = true;
+ return 0;
+ }
+
+ map->num_reg_defaults = count;
+ map->reg_defaults = kmalloc_array(count, sizeof(struct reg_default),
+ GFP_KERNEL);
+ if (!map->reg_defaults)
+ return -ENOMEM;
+
if (!map->reg_defaults_raw) {
u32 cache_bypass = map->cache_bypass;
dev_warn(map->dev, "No cache defaults, reading back from HW\n");
@@ -43,40 +60,25 @@
/* Bypass the cache access till data read from HW*/
map->cache_bypass = 1;
tmp_buf = kmalloc(map->cache_size_raw, GFP_KERNEL);
- if (!tmp_buf)
- return -EINVAL;
+ if (!tmp_buf) {
+ ret = -ENOMEM;
+ goto err_free;
+ }
ret = regmap_raw_read(map, 0, tmp_buf,
map->num_reg_defaults_raw);
map->cache_bypass = cache_bypass;
- if (ret < 0) {
- kfree(tmp_buf);
- return ret;
- }
+ if (ret < 0)
+ goto err_cache_free;
+
map->reg_defaults_raw = tmp_buf;
map->cache_free = 1;
}
- /* calculate the size of reg_defaults */
- for (count = 0, i = 0; i < map->num_reg_defaults_raw; i++) {
- val = regcache_get_val(map, map->reg_defaults_raw, i);
- if (regmap_volatile(map, i * map->reg_stride))
- continue;
- count++;
- }
-
- map->reg_defaults = kmalloc(count * sizeof(struct reg_default),
- GFP_KERNEL);
- if (!map->reg_defaults) {
- ret = -ENOMEM;
- goto err_free;
- }
-
/* fill the reg_defaults */
- map->num_reg_defaults = count;
for (i = 0, j = 0; i < map->num_reg_defaults_raw; i++) {
- val = regcache_get_val(map, map->reg_defaults_raw, i);
if (regmap_volatile(map, i * map->reg_stride))
continue;
+ val = regcache_get_val(map, map->reg_defaults_raw, i);
map->reg_defaults[j].reg = i * map->reg_stride;
map->reg_defaults[j].def = val;
j++;
@@ -84,9 +86,10 @@
return 0;
+err_cache_free:
+ kfree(tmp_buf);
err_free:
- if (map->cache_free)
- kfree(map->reg_defaults_raw);
+ kfree(map->reg_defaults);
return ret;
}
@@ -150,6 +153,8 @@
ret = regcache_hw_init(map);
if (ret < 0)
return ret;
+ if (map->cache_bypass)
+ return 0;
}
if (!map->max_register)
diff --git a/drivers/base/regmap/regmap-ac97.c b/drivers/base/regmap/regmap-ac97.c
new file mode 100644
index 0000000..e4c45d2
--- /dev/null
+++ b/drivers/base/regmap/regmap-ac97.c
@@ -0,0 +1,114 @@
+/*
+ * Register map access API - AC'97 support
+ *
+ * Copyright 2013 Linaro Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include <sound/ac97_codec.h>
+
+bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case AC97_RESET:
+ case AC97_POWERDOWN:
+ case AC97_INT_PAGING:
+ case AC97_EXTENDED_ID:
+ case AC97_EXTENDED_STATUS:
+ case AC97_EXTENDED_MID:
+ case AC97_EXTENDED_MSTATUS:
+ case AC97_GPIO_STATUS:
+ case AC97_MISC_AFE:
+ case AC97_VENDOR_ID1:
+ case AC97_VENDOR_ID2:
+ case AC97_CODEC_CLASS_REV:
+ case AC97_PCI_SVID:
+ case AC97_PCI_SID:
+ case AC97_FUNC_SELECT:
+ case AC97_FUNC_INFO:
+ case AC97_SENSE_INFO:
+ return true;
+ default:
+ return false;
+ }
+}
+EXPORT_SYMBOL_GPL(regmap_ac97_default_volatile);
+
+static int regmap_ac97_reg_read(void *context, unsigned int reg,
+ unsigned int *val)
+{
+ struct snd_ac97 *ac97 = context;
+
+ *val = ac97->bus->ops->read(ac97, reg);
+
+ return 0;
+}
+
+static int regmap_ac97_reg_write(void *context, unsigned int reg,
+ unsigned int val)
+{
+ struct snd_ac97 *ac97 = context;
+
+ ac97->bus->ops->write(ac97, reg, val);
+
+ return 0;
+}
+
+static const struct regmap_bus ac97_regmap_bus = {
+ .reg_write = regmap_ac97_reg_write,
+ .reg_read = regmap_ac97_reg_read,
+};
+
+/**
+ * regmap_init_ac97(): Initialise AC'97 register map
+ *
+ * @ac97: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer to
+ * a struct regmap.
+ */
+struct regmap *regmap_init_ac97(struct snd_ac97 *ac97,
+ const struct regmap_config *config)
+{
+ return regmap_init(&ac97->dev, &ac97_regmap_bus, ac97, config);
+}
+EXPORT_SYMBOL_GPL(regmap_init_ac97);
+
+/**
+ * devm_regmap_init_ac97(): Initialise AC'97 register map
+ *
+ * @ac97: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap. The regmap will be automatically freed by the
+ * device management code.
+ */
+struct regmap *devm_regmap_init_ac97(struct snd_ac97 *ac97,
+ const struct regmap_config *config)
+{
+ return devm_regmap_init(&ac97->dev, &ac97_regmap_bus, ac97, config);
+}
+EXPORT_SYMBOL_GPL(devm_regmap_init_ac97);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c
index b7797fb..7bb13af 100644
--- a/drivers/clk/clk-s2mps11.c
+++ b/drivers/clk/clk-s2mps11.c
@@ -23,6 +23,7 @@
#include <linux/clk-provider.h>
#include <linux/platform_device.h>
#include <linux/mfd/samsung/s2mps11.h>
+#include <linux/mfd/samsung/s2mps13.h>
#include <linux/mfd/samsung/s2mps14.h>
#include <linux/mfd/samsung/s5m8767.h>
#include <linux/mfd/samsung/core.h>
@@ -120,6 +121,24 @@
},
};
+static struct clk_init_data s2mps13_clks_init[S2MPS11_CLKS_NUM] = {
+ [S2MPS11_CLK_AP] = {
+ .name = "s2mps13_ap",
+ .ops = &s2mps11_clk_ops,
+ .flags = CLK_IS_ROOT,
+ },
+ [S2MPS11_CLK_CP] = {
+ .name = "s2mps13_cp",
+ .ops = &s2mps11_clk_ops,
+ .flags = CLK_IS_ROOT,
+ },
+ [S2MPS11_CLK_BT] = {
+ .name = "s2mps13_bt",
+ .ops = &s2mps11_clk_ops,
+ .flags = CLK_IS_ROOT,
+ },
+};
+
static struct clk_init_data s2mps14_clks_init[S2MPS11_CLKS_NUM] = {
[S2MPS11_CLK_AP] = {
.name = "s2mps14_ap",
@@ -184,6 +203,10 @@
s2mps11_reg = S2MPS11_REG_RTC_CTRL;
clks_init = s2mps11_clks_init;
break;
+ case S2MPS13X:
+ s2mps11_reg = S2MPS13_REG_RTCCTRL;
+ clks_init = s2mps13_clks_init;
+ break;
case S2MPS14X:
s2mps11_reg = S2MPS14_REG_RTCCTRL;
clks_init = s2mps14_clks_init;
@@ -279,6 +302,7 @@
static const struct platform_device_id s2mps11_clk_id[] = {
{ "s2mps11-clk", S2MPS11X},
+ { "s2mps13-clk", S2MPS13X},
{ "s2mps14-clk", S2MPS14X},
{ "s5m8767-clk", S5M8767X},
{ },
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 7072c28..49c2652 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -61,14 +61,14 @@
has been initialized.
config EDAC_MCE_INJ
- tristate "Simple MCE injection interface over /sysfs"
- depends on EDAC_DECODE_MCE
+ tristate "Simple MCE injection interface"
+ depends on EDAC_DECODE_MCE && DEBUG_FS
default n
help
- This is a simple interface to inject MCEs over /sysfs and test
- the MCE decoding code in EDAC.
+ This is a simple debugfs interface to inject MCEs and test different
+ aspects of the MCE handling code.
- This is currently AMD-only.
+ WARNING: Do not even assume this interface is staying stable!
config EDAC_MM_EDAC
tristate "Main Memory EDAC (Error Detection And Correction) reporting"
@@ -105,11 +105,11 @@
In doubt, say 'Y'.
config EDAC_AMD64
- tristate "AMD64 (Opteron, Athlon64) K8, F10h"
- depends on EDAC_MM_EDAC && AMD_NB && X86_64 && EDAC_DECODE_MCE
+ tristate "AMD64 (Opteron, Athlon64)"
+ depends on EDAC_MM_EDAC && AMD_NB && EDAC_DECODE_MCE
help
Support for error detection and correction of DRAM ECC errors on
- the AMD64 families of memory controllers (K8 and F10h)
+ the AMD64 families (>= K8) of memory controllers.
config EDAC_AMD64_ERROR_INJECTION
bool "Sysfs HW Error injection facilities"
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 359aa49..d40c69a 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -9,7 +9,7 @@
obj-$(CONFIG_EDAC) := edac_stub.o
obj-$(CONFIG_EDAC_MM_EDAC) += edac_core.o
-edac_core-y := edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o
+edac_core-y := edac_mc.o edac_device.o edac_mc_sysfs.o
edac_core-y += edac_module.o edac_device_sysfs.o
ifdef CONFIG_PCI
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index bbd6514..17638d7 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -692,9 +692,19 @@
{
edac_dbg(1, "F2x%d90 (DRAM Cfg Low): 0x%08x\n", chan, dclr);
- edac_dbg(1, " DIMM type: %sbuffered; all DIMMs support ECC: %s\n",
- (dclr & BIT(16)) ? "un" : "",
- (dclr & BIT(19)) ? "yes" : "no");
+ if (pvt->dram_type == MEM_LRDDR3) {
+ u32 dcsm = pvt->csels[chan].csmasks[0];
+ /*
+ * It's assumed all LRDIMMs in a DCT are going to be of
+ * same 'type' until proven otherwise. So, use a cs
+ * value of '0' here to get dcsm value.
+ */
+ edac_dbg(1, " LRDIMM %dx rank multiply\n", (dcsm & 0x3));
+ }
+
+ edac_dbg(1, "All DIMMs support ECC:%s\n",
+ (dclr & BIT(19)) ? "yes" : "no");
+
edac_dbg(1, " PAR/ERR parity: %s\n",
(dclr & BIT(8)) ? "enabled" : "disabled");
@@ -756,7 +766,7 @@
if (pvt->fam == 0xf && pvt->ext_model < K8_REV_F) {
pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 8;
pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 8;
- } else if (pvt->fam == 0x15 && pvt->model >= 0x30) {
+ } else if (pvt->fam == 0x15 && pvt->model == 0x30) {
pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 4;
pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 2;
} else {
@@ -813,25 +823,63 @@
}
}
-static enum mem_type determine_memory_type(struct amd64_pvt *pvt, int cs)
+static void determine_memory_type(struct amd64_pvt *pvt)
{
- enum mem_type type;
+ u32 dram_ctrl, dcsm;
- /* F15h supports only DDR3 */
- if (pvt->fam >= 0x15)
- type = (pvt->dclr0 & BIT(16)) ? MEM_DDR3 : MEM_RDDR3;
- else if (pvt->fam == 0x10 || pvt->ext_model >= K8_REV_F) {
+ switch (pvt->fam) {
+ case 0xf:
+ if (pvt->ext_model >= K8_REV_F)
+ goto ddr3;
+
+ pvt->dram_type = (pvt->dclr0 & BIT(18)) ? MEM_DDR : MEM_RDDR;
+ return;
+
+ case 0x10:
if (pvt->dchr0 & DDR3_MODE)
- type = (pvt->dclr0 & BIT(16)) ? MEM_DDR3 : MEM_RDDR3;
+ goto ddr3;
+
+ pvt->dram_type = (pvt->dclr0 & BIT(16)) ? MEM_DDR2 : MEM_RDDR2;
+ return;
+
+ case 0x15:
+ if (pvt->model < 0x60)
+ goto ddr3;
+
+ /*
+ * Model 0x60h needs special handling:
+ *
+ * We use a Chip Select value of '0' to obtain dcsm.
+ * Theoretically, it is possible to populate LRDIMMs of different
+ * 'Rank' value on a DCT. But this is not the common case. So,
+ * it's reasonable to assume all DIMMs are going to be of same
+ * 'type' until proven otherwise.
+ */
+ amd64_read_dct_pci_cfg(pvt, 0, DRAM_CONTROL, &dram_ctrl);
+ dcsm = pvt->csels[0].csmasks[0];
+
+ if (((dram_ctrl >> 8) & 0x7) == 0x2)
+ pvt->dram_type = MEM_DDR4;
+ else if (pvt->dclr0 & BIT(16))
+ pvt->dram_type = MEM_DDR3;
+ else if (dcsm & 0x3)
+ pvt->dram_type = MEM_LRDDR3;
else
- type = (pvt->dclr0 & BIT(16)) ? MEM_DDR2 : MEM_RDDR2;
- } else {
- type = (pvt->dclr0 & BIT(18)) ? MEM_DDR : MEM_RDDR;
+ pvt->dram_type = MEM_RDDR3;
+
+ return;
+
+ case 0x16:
+ goto ddr3;
+
+ default:
+ WARN(1, KERN_ERR "%s: Family??? 0x%x\n", __func__, pvt->fam);
+ pvt->dram_type = MEM_EMPTY;
}
+ return;
- amd64_info("CS%d: %s\n", cs, edac_mem_types[type]);
-
- return type;
+ddr3:
+ pvt->dram_type = (pvt->dclr0 & BIT(16)) ? MEM_DDR3 : MEM_RDDR3;
}
/* Get the number of DCT channels the memory controller is using. */
@@ -958,8 +1006,12 @@
if (WARN_ON(!nb))
return;
- pci_func = (pvt->model == 0x30) ? PCI_DEVICE_ID_AMD_15H_M30H_NB_F1
- : PCI_DEVICE_ID_AMD_15H_NB_F1;
+ if (pvt->model == 0x60)
+ pci_func = PCI_DEVICE_ID_AMD_15H_M60H_NB_F1;
+ else if (pvt->model == 0x30)
+ pci_func = PCI_DEVICE_ID_AMD_15H_M30H_NB_F1;
+ else
+ pci_func = PCI_DEVICE_ID_AMD_15H_NB_F1;
f1 = pci_get_related_function(nb->misc->vendor, pci_func, nb->misc);
if (WARN_ON(!f1))
@@ -1049,7 +1101,7 @@
}
static int k8_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
- unsigned cs_mode)
+ unsigned cs_mode, int cs_mask_nr)
{
u32 dclr = dct ? pvt->dclr1 : pvt->dclr0;
@@ -1167,8 +1219,43 @@
return cs_size;
}
+static int ddr3_lrdimm_cs_size(unsigned i, unsigned rank_multiply)
+{
+ unsigned shift = 0;
+ int cs_size = 0;
+
+ if (i < 4 || i == 6)
+ cs_size = -1;
+ else if (i == 12)
+ shift = 7;
+ else if (!(i & 0x1))
+ shift = i >> 1;
+ else
+ shift = (i + 1) >> 1;
+
+ if (cs_size != -1)
+ cs_size = rank_multiply * (128 << shift);
+
+ return cs_size;
+}
+
+static int ddr4_cs_size(unsigned i)
+{
+ int cs_size = 0;
+
+ if (i == 0)
+ cs_size = -1;
+ else if (i == 1)
+ cs_size = 1024;
+ else
+ /* Min cs_size = 1G */
+ cs_size = 1024 * (1 << (i >> 1));
+
+ return cs_size;
+}
+
static int f10_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
- unsigned cs_mode)
+ unsigned cs_mode, int cs_mask_nr)
{
u32 dclr = dct ? pvt->dclr1 : pvt->dclr0;
@@ -1184,18 +1271,49 @@
* F15h supports only 64bit DCT interfaces
*/
static int f15_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
- unsigned cs_mode)
+ unsigned cs_mode, int cs_mask_nr)
{
WARN_ON(cs_mode > 12);
return ddr3_cs_size(cs_mode, false);
}
+/* F15h M60h supports DDR4 mapping as well.. */
+static int f15_m60h_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
+ unsigned cs_mode, int cs_mask_nr)
+{
+ int cs_size;
+ u32 dcsm = pvt->csels[dct].csmasks[cs_mask_nr];
+
+ WARN_ON(cs_mode > 12);
+
+ if (pvt->dram_type == MEM_DDR4) {
+ if (cs_mode > 9)
+ return -1;
+
+ cs_size = ddr4_cs_size(cs_mode);
+ } else if (pvt->dram_type == MEM_LRDDR3) {
+ unsigned rank_multiply = dcsm & 0xf;
+
+ if (rank_multiply == 3)
+ rank_multiply = 4;
+ cs_size = ddr3_lrdimm_cs_size(cs_mode, rank_multiply);
+ } else {
+ /* Minimum cs size is 512mb for F15hM60h*/
+ if (cs_mode == 0x1)
+ return -1;
+
+ cs_size = ddr3_cs_size(cs_mode, false);
+ }
+
+ return cs_size;
+}
+
/*
* F16h and F15h model 30h have only limited cs_modes.
*/
static int f16_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
- unsigned cs_mode)
+ unsigned cs_mode, int cs_mask_nr)
{
WARN_ON(cs_mode > 12);
@@ -1757,13 +1875,20 @@
size0 = 0;
if (dcsb[dimm*2] & DCSB_CS_ENABLE)
+ /* For f15m60h, need multiplier for LRDIMM cs_size
+ * calculation. We pass 'dimm' value to the dbam_to_cs
+ * mapper so we can find the multiplier from the
+ * corresponding DCSM.
+ */
size0 = pvt->ops->dbam_to_cs(pvt, ctrl,
- DBAM_DIMM(dimm, dbam));
+ DBAM_DIMM(dimm, dbam),
+ dimm);
size1 = 0;
if (dcsb[dimm*2 + 1] & DCSB_CS_ENABLE)
size1 = pvt->ops->dbam_to_cs(pvt, ctrl,
- DBAM_DIMM(dimm, dbam));
+ DBAM_DIMM(dimm, dbam),
+ dimm);
amd64_info(EDAC_MC ": %d: %5dMB %d: %5dMB\n",
dimm * 2, size0,
@@ -1812,6 +1937,16 @@
.dbam_to_cs = f16_dbam_to_chip_select,
}
},
+ [F15_M60H_CPUS] = {
+ .ctl_name = "F15h_M60h",
+ .f1_id = PCI_DEVICE_ID_AMD_15H_M60H_NB_F1,
+ .f3_id = PCI_DEVICE_ID_AMD_15H_M60H_NB_F3,
+ .ops = {
+ .early_channel_count = f1x_early_channel_count,
+ .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow,
+ .dbam_to_cs = f15_m60h_dbam_to_chip_select,
+ }
+ },
[F16_CPUS] = {
.ctl_name = "F16h",
.f1_id = PCI_DEVICE_ID_AMD_16H_NB_F1,
@@ -2175,6 +2310,8 @@
}
pvt->ecc_sym_sz = 4;
+ determine_memory_type(pvt);
+ edac_dbg(1, " DIMM type: %s\n", edac_mem_types[pvt->dram_type]);
if (pvt->fam >= 0x10) {
amd64_read_pci_cfg(pvt->F3, EXT_NB_MCA_CFG, &tmp);
@@ -2238,7 +2375,8 @@
*/
cs_mode = DBAM_DIMM(csrow_nr / 2, dbam);
- nr_pages = pvt->ops->dbam_to_cs(pvt, dct, cs_mode) << (20 - PAGE_SHIFT);
+ nr_pages = pvt->ops->dbam_to_cs(pvt, dct, cs_mode, (csrow_nr / 2))
+ << (20 - PAGE_SHIFT);
edac_dbg(0, "csrow: %d, channel: %d, DBAM idx: %d\n",
csrow_nr, dct, cs_mode);
@@ -2257,7 +2395,6 @@
struct csrow_info *csrow;
struct dimm_info *dimm;
enum edac_type edac_mode;
- enum mem_type mtype;
int i, j, empty = 1;
int nr_pages = 0;
u32 val;
@@ -2302,8 +2439,6 @@
nr_pages += row_dct1_pages;
}
- mtype = determine_memory_type(pvt, i);
-
edac_dbg(1, "Total csrow%d pages: %u\n", i, nr_pages);
/*
@@ -2317,7 +2452,7 @@
for (j = 0; j < pvt->channel_count; j++) {
dimm = csrow->channels[j]->dimm;
- dimm->mtype = mtype;
+ dimm->mtype = pvt->dram_type;
dimm->edac_mode = edac_mode;
}
}
@@ -2604,6 +2739,10 @@
fam_type = &family_types[F15_M30H_CPUS];
pvt->ops = &family_types[F15_M30H_CPUS].ops;
break;
+ } else if (pvt->model == 0x60) {
+ fam_type = &family_types[F15_M60H_CPUS];
+ pvt->ops = &family_types[F15_M60H_CPUS].ops;
+ break;
}
fam_type = &family_types[F15_CPUS];
@@ -2828,55 +2967,13 @@
* inquiry this table to see if this driver is for a given device found.
*/
static const struct pci_device_id amd64_pci_table[] = {
- {
- .vendor = PCI_VENDOR_ID_AMD,
- .device = PCI_DEVICE_ID_AMD_K8_NB_MEMCTL,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = 0,
- .class_mask = 0,
- },
- {
- .vendor = PCI_VENDOR_ID_AMD,
- .device = PCI_DEVICE_ID_AMD_10H_NB_DRAM,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = 0,
- .class_mask = 0,
- },
- {
- .vendor = PCI_VENDOR_ID_AMD,
- .device = PCI_DEVICE_ID_AMD_15H_NB_F2,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = 0,
- .class_mask = 0,
- },
- {
- .vendor = PCI_VENDOR_ID_AMD,
- .device = PCI_DEVICE_ID_AMD_15H_M30H_NB_F2,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = 0,
- .class_mask = 0,
- },
- {
- .vendor = PCI_VENDOR_ID_AMD,
- .device = PCI_DEVICE_ID_AMD_16H_NB_F2,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = 0,
- .class_mask = 0,
- },
- {
- .vendor = PCI_VENDOR_ID_AMD,
- .device = PCI_DEVICE_ID_AMD_16H_M30H_NB_F2,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = 0,
- .class_mask = 0,
- },
-
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_K8_NB_MEMCTL) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_DRAM) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F2) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F2) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M60H_NB_F2) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F2) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F2) },
{0, }
};
MODULE_DEVICE_TABLE(pci, amd64_pci_table);
@@ -2938,6 +3035,11 @@
goto err_no_instances;
setup_pci_device();
+
+#ifdef CONFIG_X86_32
+ amd64_err("%s on 32-bit is unsupported. USE AT YOUR OWN RISK!\n", EDAC_MOD_STR);
+#endif
+
return 0;
err_no_instances:
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index 55fb594..d8468c6 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -162,10 +162,12 @@
/*
* PCI-defined configuration space registers
*/
-#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F1 0x141b
-#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F2 0x141c
#define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601
#define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602
+#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F1 0x141b
+#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F2 0x141c
+#define PCI_DEVICE_ID_AMD_15H_M60H_NB_F1 0x1571
+#define PCI_DEVICE_ID_AMD_15H_M60H_NB_F2 0x1572
#define PCI_DEVICE_ID_AMD_16H_NB_F1 0x1531
#define PCI_DEVICE_ID_AMD_16H_NB_F2 0x1532
#define PCI_DEVICE_ID_AMD_16H_M30H_NB_F1 0x1581
@@ -221,6 +223,8 @@
#define csrow_enabled(i, dct, pvt) ((pvt)->csels[(dct)].csbases[(i)] & DCSB_CS_ENABLE)
+#define DRAM_CONTROL 0x78
+
#define DBAM0 0x80
#define DBAM1 0x180
@@ -301,6 +305,7 @@
F10_CPUS,
F15_CPUS,
F15_M30H_CPUS,
+ F15_M60H_CPUS,
F16_CPUS,
F16_M30H_CPUS,
NUM_FAMILIES,
@@ -379,6 +384,9 @@
/* place to store error injection parameters prior to issue */
struct error_injection injection;
+
+ /* cache the dram_type */
+ enum mem_type dram_type;
};
enum err_codes {
@@ -480,7 +488,8 @@
int (*early_channel_count) (struct amd64_pvt *pvt);
void (*map_sysaddr_to_csrow) (struct mem_ctl_info *mci, u64 sys_addr,
struct err_info *);
- int (*dbam_to_cs) (struct amd64_pvt *pvt, u8 dct, unsigned cs_mode);
+ int (*dbam_to_cs) (struct amd64_pvt *pvt, u8 dct,
+ unsigned cs_mode, int cs_mask_nr);
};
struct amd64_family_type {
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index c3893b0..1747906 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -125,27 +125,27 @@
#endif /* CONFIG_EDAC_DEBUG */
-/*
- * keep those in sync with the enum mem_type
- */
const char * const edac_mem_types[] = {
- "Empty csrow",
- "Reserved csrow type",
- "Unknown csrow type",
- "Fast page mode RAM",
- "Extended data out RAM",
- "Burst Extended data out RAM",
- "Single data rate SDRAM",
- "Registered single data rate SDRAM",
- "Double data rate SDRAM",
- "Registered Double data rate SDRAM",
- "Rambus DRAM",
- "Unbuffered DDR2 RAM",
- "Fully buffered DDR2",
- "Registered DDR2 RAM",
- "Rambus XDR",
- "Unbuffered DDR3 RAM",
- "Registered DDR3 RAM",
+ [MEM_EMPTY] = "Empty csrow",
+ [MEM_RESERVED] = "Reserved csrow type",
+ [MEM_UNKNOWN] = "Unknown csrow type",
+ [MEM_FPM] = "Fast page mode RAM",
+ [MEM_EDO] = "Extended data out RAM",
+ [MEM_BEDO] = "Burst Extended data out RAM",
+ [MEM_SDR] = "Single data rate SDRAM",
+ [MEM_RDR] = "Registered single data rate SDRAM",
+ [MEM_DDR] = "Double data rate SDRAM",
+ [MEM_RDDR] = "Registered Double data rate SDRAM",
+ [MEM_RMBS] = "Rambus DRAM",
+ [MEM_DDR2] = "Unbuffered DDR2 RAM",
+ [MEM_FB_DDR2] = "Fully buffered DDR2",
+ [MEM_RDDR2] = "Registered DDR2 RAM",
+ [MEM_XDR] = "Rambus XDR",
+ [MEM_DDR3] = "Unbuffered DDR3 RAM",
+ [MEM_RDDR3] = "Registered DDR3 RAM",
+ [MEM_LRDDR3] = "Load-Reduced DDR3 RAM",
+ [MEM_DDR4] = "Unbuffered DDR4 RAM",
+ [MEM_RDDR4] = "Registered DDR4 RAM",
};
EXPORT_SYMBOL_GPL(edac_mem_types);
diff --git a/drivers/edac/edac_pci_sysfs.c b/drivers/edac/edac_pci_sysfs.c
index e8658e4..24d877f 100644
--- a/drivers/edac/edac_pci_sysfs.c
+++ b/drivers/edac/edac_pci_sysfs.c
@@ -14,9 +14,6 @@
#include "edac_core.h"
#include "edac_module.h"
-/* Turn off this whole feature if PCI is not configured */
-#ifdef CONFIG_PCI
-
#define EDAC_PCI_SYMLINK "device"
/* data variables exported via sysfs */
@@ -761,5 +758,3 @@
module_param(edac_pci_panic_on_pe, int, 0644);
MODULE_PARM_DESC(edac_pci_panic_on_pe,
"Panic on PCI Bus Parity error: 0=off 1=on");
-
-#endif /* CONFIG_PCI */
diff --git a/drivers/edac/ghes_edac.c b/drivers/edac/ghes_edac.c
index 8399b4e..b246819 100644
--- a/drivers/edac/ghes_edac.c
+++ b/drivers/edac/ghes_edac.c
@@ -413,8 +413,8 @@
/* Generate the trace event */
grain_bits = fls_long(e->grain);
- sprintf(pvt->detail_location, "APEI location: %s %s",
- e->location, e->other_detail);
+ snprintf(pvt->detail_location, sizeof(pvt->detail_location),
+ "APEI location: %s %s", e->location, e->other_detail);
trace_mc_event(type, e->msg, e->label, e->error_count,
mci->mc_idx, e->top_layer, e->mid_layer, e->low_layer,
PAGES_TO_MiB(e->page_frame_number) | e->offset_in_page,
diff --git a/drivers/edac/i3000_edac.c b/drivers/edac/i3000_edac.c
index cd28b96..5cb36a6 100644
--- a/drivers/edac/i3000_edac.c
+++ b/drivers/edac/i3000_edac.c
@@ -542,8 +542,7 @@
pci_unregister_driver(&i3000_driver);
fail0:
- if (mci_pdev)
- pci_dev_put(mci_pdev);
+ pci_dev_put(mci_pdev);
return pci_rc;
}
diff --git a/drivers/edac/i3200_edac.c b/drivers/edac/i3200_edac.c
index aa98b13..4ad062b 100644
--- a/drivers/edac/i3200_edac.c
+++ b/drivers/edac/i3200_edac.c
@@ -523,8 +523,7 @@
pci_unregister_driver(&i3200_driver);
fail0:
- if (mci_pdev)
- pci_dev_put(mci_pdev);
+ pci_dev_put(mci_pdev);
return pci_rc;
}
diff --git a/drivers/edac/i82443bxgx_edac.c b/drivers/edac/i82443bxgx_edac.c
index d730e276..b4705d9 100644
--- a/drivers/edac/i82443bxgx_edac.c
+++ b/drivers/edac/i82443bxgx_edac.c
@@ -458,8 +458,7 @@
if (!i82443bxgx_registered)
i82443bxgx_edacmc_remove_one(mci_pdev);
- if (mci_pdev)
- pci_dev_put(mci_pdev);
+ pci_dev_put(mci_pdev);
}
module_init(i82443bxgx_edacmc_init);
diff --git a/drivers/edac/mce_amd.c b/drivers/edac/mce_amd.c
index f78c1c5..58586d5 100644
--- a/drivers/edac/mce_amd.c
+++ b/drivers/edac/mce_amd.c
@@ -138,6 +138,15 @@
"Retire status queue"
};
+static const char * const mc6_mce_desc[] = {
+ "Hardware Assertion",
+ "Free List",
+ "Physical Register File",
+ "Retire Queue",
+ "Scheduler table",
+ "Status Register File",
+};
+
static bool f12h_mc0_mce(u16 ec, u8 xec)
{
bool ret = false;
@@ -432,8 +441,8 @@
pr_cont(": %s error in the L2 cache tags.\n", R4_MSG(ec));
else if (xec == 0x0) {
if (TLB_ERROR(ec))
- pr_cont(": %s error in a Page Descriptor Cache or "
- "Guest TLB.\n", TT_MSG(ec));
+ pr_cont("%s error in a Page Descriptor Cache or Guest TLB.\n",
+ TT_MSG(ec));
else if (BUS_ERROR(ec))
pr_cont(": %s/ECC error in data read from NB: %s.\n",
R4_MSG(ec), PP_MSG(ec));
@@ -672,38 +681,10 @@
pr_emerg(HW_ERR "MC6 Error: ");
- switch (xec) {
- case 0x0:
- pr_cont("Hardware Assertion");
- break;
-
- case 0x1:
- pr_cont("Free List");
- break;
-
- case 0x2:
- pr_cont("Physical Register File");
- break;
-
- case 0x3:
- pr_cont("Retire Queue");
- break;
-
- case 0x4:
- pr_cont("Scheduler table");
- break;
-
- case 0x5:
- pr_cont("Status Register File");
- break;
-
- default:
+ if (xec > 0x5)
goto wrong_mc6_mce;
- break;
- }
- pr_cont(" parity error.\n");
-
+ pr_cont("%s parity error.\n", mc6_mce_desc[xec]);
return;
wrong_mc6_mce:
@@ -800,7 +781,7 @@
pr_cont("]: 0x%016llx\n", m->status);
if (m->status & MCI_STATUS_ADDRV)
- pr_emerg(HW_ERR "MC%d_ADDR: 0x%016llx\n", m->bank, m->addr);
+ pr_emerg(HW_ERR "MC%d Error Address: 0x%016llx\n", m->bank, m->addr);
if (!fam_ops)
goto err_code;
diff --git a/drivers/edac/mce_amd_inj.c b/drivers/edac/mce_amd_inj.c
index 5e46a9f..0bd91a8 100644
--- a/drivers/edac/mce_amd_inj.c
+++ b/drivers/edac/mce_amd_inj.c
@@ -1,173 +1,262 @@
/*
- * A simple MCE injection facility for testing the MCE decoding code. This
- * driver should be built as module so that it can be loaded on production
- * kernels for testing purposes.
+ * A simple MCE injection facility for testing different aspects of the RAS
+ * code. This driver should be built as module so that it can be loaded
+ * on production kernels for testing purposes.
*
* This file may be distributed under the terms of the GNU General Public
* License version 2.
*
- * Copyright (c) 2010: Borislav Petkov <bp@alien8.de>
+ * Copyright (c) 2010-14: Borislav Petkov <bp@alien8.de>
* Advanced Micro Devices Inc.
*/
#include <linux/kobject.h>
+#include <linux/debugfs.h>
#include <linux/device.h>
-#include <linux/edac.h>
#include <linux/module.h>
+#include <linux/cpu.h>
#include <asm/mce.h>
#include "mce_amd.h"
-struct edac_mce_attr {
- struct attribute attr;
- ssize_t (*show) (struct kobject *kobj, struct edac_mce_attr *attr, char *buf);
- ssize_t (*store)(struct kobject *kobj, struct edac_mce_attr *attr,
- const char *buf, size_t count);
-};
-
-#define EDAC_MCE_ATTR(_name, _mode, _show, _store) \
-static struct edac_mce_attr mce_attr_##_name = __ATTR(_name, _mode, _show, _store)
-
-static struct kobject *mce_kobj;
-
/*
* Collect all the MCi_XXX settings
*/
static struct mce i_mce;
+static struct dentry *dfs_inj;
-#define MCE_INJECT_STORE(reg) \
-static ssize_t edac_inject_##reg##_store(struct kobject *kobj, \
- struct edac_mce_attr *attr, \
- const char *data, size_t count)\
+#define MCE_INJECT_SET(reg) \
+static int inj_##reg##_set(void *data, u64 val) \
{ \
- int ret = 0; \
- unsigned long value; \
+ struct mce *m = (struct mce *)data; \
\
- ret = kstrtoul(data, 16, &value); \
- if (ret < 0) \
- printk(KERN_ERR "Error writing MCE " #reg " field.\n"); \
- \
- i_mce.reg = value; \
- \
- return count; \
+ m->reg = val; \
+ return 0; \
}
-MCE_INJECT_STORE(status);
-MCE_INJECT_STORE(misc);
-MCE_INJECT_STORE(addr);
+MCE_INJECT_SET(status);
+MCE_INJECT_SET(misc);
+MCE_INJECT_SET(addr);
-#define MCE_INJECT_SHOW(reg) \
-static ssize_t edac_inject_##reg##_show(struct kobject *kobj, \
- struct edac_mce_attr *attr, \
- char *buf) \
+#define MCE_INJECT_GET(reg) \
+static int inj_##reg##_get(void *data, u64 *val) \
{ \
- return sprintf(buf, "0x%016llx\n", i_mce.reg); \
+ struct mce *m = (struct mce *)data; \
+ \
+ *val = m->reg; \
+ return 0; \
}
-MCE_INJECT_SHOW(status);
-MCE_INJECT_SHOW(misc);
-MCE_INJECT_SHOW(addr);
+MCE_INJECT_GET(status);
+MCE_INJECT_GET(misc);
+MCE_INJECT_GET(addr);
-EDAC_MCE_ATTR(status, 0644, edac_inject_status_show, edac_inject_status_store);
-EDAC_MCE_ATTR(misc, 0644, edac_inject_misc_show, edac_inject_misc_store);
-EDAC_MCE_ATTR(addr, 0644, edac_inject_addr_show, edac_inject_addr_store);
+DEFINE_SIMPLE_ATTRIBUTE(status_fops, inj_status_get, inj_status_set, "%llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(misc_fops, inj_misc_get, inj_misc_set, "%llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(addr_fops, inj_addr_get, inj_addr_set, "%llx\n");
+
+/*
+ * Caller needs to be make sure this cpu doesn't disappear
+ * from under us, i.e.: get_cpu/put_cpu.
+ */
+static int toggle_hw_mce_inject(unsigned int cpu, bool enable)
+{
+ u32 l, h;
+ int err;
+
+ err = rdmsr_on_cpu(cpu, MSR_K7_HWCR, &l, &h);
+ if (err) {
+ pr_err("%s: error reading HWCR\n", __func__);
+ return err;
+ }
+
+ enable ? (l |= BIT(18)) : (l &= ~BIT(18));
+
+ err = wrmsr_on_cpu(cpu, MSR_K7_HWCR, l, h);
+ if (err)
+ pr_err("%s: error writing HWCR\n", __func__);
+
+ return err;
+}
+
+static int flags_get(void *data, u64 *val)
+{
+ struct mce *m = (struct mce *)data;
+
+ *val = m->inject_flags;
+
+ return 0;
+}
+
+static int flags_set(void *data, u64 val)
+{
+ struct mce *m = (struct mce *)data;
+
+ m->inject_flags = (u8)val;
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(flags_fops, flags_get, flags_set, "%llu\n");
+
+/*
+ * On which CPU to inject?
+ */
+MCE_INJECT_GET(extcpu);
+
+static int inj_extcpu_set(void *data, u64 val)
+{
+ struct mce *m = (struct mce *)data;
+
+ if (val >= nr_cpu_ids || !cpu_online(val)) {
+ pr_err("%s: Invalid CPU: %llu\n", __func__, val);
+ return -EINVAL;
+ }
+ m->extcpu = val;
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(extcpu_fops, inj_extcpu_get, inj_extcpu_set, "%llu\n");
+
+static void trigger_mce(void *info)
+{
+ asm volatile("int $18");
+}
+
+static void do_inject(void)
+{
+ u64 mcg_status = 0;
+ unsigned int cpu = i_mce.extcpu;
+ u8 b = i_mce.bank;
+
+ if (!(i_mce.inject_flags & MCJ_EXCEPTION)) {
+ amd_decode_mce(NULL, 0, &i_mce);
+ return;
+ }
+
+ get_online_cpus();
+ if (!cpu_online(cpu))
+ goto err;
+
+ /* prep MCE global settings for the injection */
+ mcg_status = MCG_STATUS_MCIP | MCG_STATUS_EIPV;
+
+ if (!(i_mce.status & MCI_STATUS_PCC))
+ mcg_status |= MCG_STATUS_RIPV;
+
+ toggle_hw_mce_inject(cpu, true);
+
+ wrmsr_on_cpu(cpu, MSR_IA32_MCG_STATUS,
+ (u32)mcg_status, (u32)(mcg_status >> 32));
+
+ wrmsr_on_cpu(cpu, MSR_IA32_MCx_STATUS(b),
+ (u32)i_mce.status, (u32)(i_mce.status >> 32));
+
+ wrmsr_on_cpu(cpu, MSR_IA32_MCx_ADDR(b),
+ (u32)i_mce.addr, (u32)(i_mce.addr >> 32));
+
+ wrmsr_on_cpu(cpu, MSR_IA32_MCx_MISC(b),
+ (u32)i_mce.misc, (u32)(i_mce.misc >> 32));
+
+ toggle_hw_mce_inject(cpu, false);
+
+ smp_call_function_single(cpu, trigger_mce, NULL, 0);
+
+err:
+ put_online_cpus();
+
+}
/*
* This denotes into which bank we're injecting and triggers
* the injection, at the same time.
*/
-static ssize_t edac_inject_bank_store(struct kobject *kobj,
- struct edac_mce_attr *attr,
- const char *data, size_t count)
+static int inj_bank_set(void *data, u64 val)
{
- int ret = 0;
- unsigned long value;
+ struct mce *m = (struct mce *)data;
- ret = kstrtoul(data, 10, &value);
- if (ret < 0) {
- printk(KERN_ERR "Invalid bank value!\n");
- return -EINVAL;
- }
-
- if (value > 5)
- if (boot_cpu_data.x86 != 0x15 || value > 6) {
- printk(KERN_ERR "Non-existent MCE bank: %lu\n", value);
+ if (val > 5) {
+ if (boot_cpu_data.x86 != 0x15 || val > 6) {
+ pr_err("Non-existent MCE bank: %llu\n", val);
return -EINVAL;
}
+ }
- i_mce.bank = value;
+ m->bank = val;
+ do_inject();
- amd_decode_mce(NULL, 0, &i_mce);
-
- return count;
+ return 0;
}
-static ssize_t edac_inject_bank_show(struct kobject *kobj,
- struct edac_mce_attr *attr, char *buf)
+static int inj_bank_get(void *data, u64 *val)
{
- return sprintf(buf, "%d\n", i_mce.bank);
+ struct mce *m = (struct mce *)data;
+
+ *val = m->bank;
+ return 0;
}
-EDAC_MCE_ATTR(bank, 0644, edac_inject_bank_show, edac_inject_bank_store);
+DEFINE_SIMPLE_ATTRIBUTE(bank_fops, inj_bank_get, inj_bank_set, "%llu\n");
-static struct edac_mce_attr *sysfs_attrs[] = { &mce_attr_status, &mce_attr_misc,
- &mce_attr_addr, &mce_attr_bank
+struct dfs_node {
+ char *name;
+ struct dentry *d;
+ const struct file_operations *fops;
+} dfs_fls[] = {
+ { .name = "status", .fops = &status_fops },
+ { .name = "misc", .fops = &misc_fops },
+ { .name = "addr", .fops = &addr_fops },
+ { .name = "bank", .fops = &bank_fops },
+ { .name = "flags", .fops = &flags_fops },
+ { .name = "cpu", .fops = &extcpu_fops },
};
-static int __init edac_init_mce_inject(void)
-{
- struct bus_type *edac_subsys = NULL;
- int i, err = 0;
-
- edac_subsys = edac_get_sysfs_subsys();
- if (!edac_subsys)
- return -EINVAL;
-
- mce_kobj = kobject_create_and_add("mce", &edac_subsys->dev_root->kobj);
- if (!mce_kobj) {
- printk(KERN_ERR "Error creating a mce kset.\n");
- err = -ENOMEM;
- goto err_mce_kobj;
- }
-
- for (i = 0; i < ARRAY_SIZE(sysfs_attrs); i++) {
- err = sysfs_create_file(mce_kobj, &sysfs_attrs[i]->attr);
- if (err) {
- printk(KERN_ERR "Error creating %s in sysfs.\n",
- sysfs_attrs[i]->attr.name);
- goto err_sysfs_create;
- }
- }
- return 0;
-
-err_sysfs_create:
- while (--i >= 0)
- sysfs_remove_file(mce_kobj, &sysfs_attrs[i]->attr);
-
- kobject_del(mce_kobj);
-
-err_mce_kobj:
- edac_put_sysfs_subsys();
-
- return err;
-}
-
-static void __exit edac_exit_mce_inject(void)
+static int __init init_mce_inject(void)
{
int i;
- for (i = 0; i < ARRAY_SIZE(sysfs_attrs); i++)
- sysfs_remove_file(mce_kobj, &sysfs_attrs[i]->attr);
+ dfs_inj = debugfs_create_dir("mce-inject", NULL);
+ if (!dfs_inj)
+ return -EINVAL;
- kobject_del(mce_kobj);
+ for (i = 0; i < ARRAY_SIZE(dfs_fls); i++) {
+ dfs_fls[i].d = debugfs_create_file(dfs_fls[i].name,
+ S_IRUSR | S_IWUSR,
+ dfs_inj,
+ &i_mce,
+ dfs_fls[i].fops);
- edac_put_sysfs_subsys();
+ if (!dfs_fls[i].d)
+ goto err_dfs_add;
+ }
+
+ return 0;
+
+err_dfs_add:
+ while (--i >= 0)
+ debugfs_remove(dfs_fls[i].d);
+
+ debugfs_remove(dfs_inj);
+ dfs_inj = NULL;
+
+ return -ENOMEM;
}
-module_init(edac_init_mce_inject);
-module_exit(edac_exit_mce_inject);
+static void __exit exit_mce_inject(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(dfs_fls); i++)
+ debugfs_remove(dfs_fls[i].d);
+
+ memset(&dfs_fls, 0, sizeof(dfs_fls));
+
+ debugfs_remove(dfs_inj);
+ dfs_inj = NULL;
+}
+module_init(init_mce_inject);
+module_exit(exit_mce_inject);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Borislav Petkov <bp@alien8.de>");
MODULE_AUTHOR("AMD Inc.");
-MODULE_DESCRIPTION("MCE injection facility for testing MCE decoding");
+MODULE_DESCRIPTION("MCE injection facility for RAS testing");
diff --git a/drivers/edac/mv64x60_edac.c b/drivers/edac/mv64x60_edac.c
index 542fad7..6366e88 100644
--- a/drivers/edac/mv64x60_edac.c
+++ b/drivers/edac/mv64x60_edac.c
@@ -178,7 +178,7 @@
res = devm_request_irq(&pdev->dev,
pdata->irq,
mv64x60_pci_isr,
- IRQF_DISABLED,
+ 0,
"[EDAC] PCI err",
pci);
if (res < 0) {
@@ -345,7 +345,7 @@
res = devm_request_irq(&pdev->dev,
pdata->irq,
mv64x60_sram_isr,
- IRQF_DISABLED,
+ 0,
"[EDAC] SRAM err",
edac_dev);
if (res < 0) {
@@ -540,7 +540,7 @@
res = devm_request_irq(&pdev->dev,
pdata->irq,
mv64x60_cpu_isr,
- IRQF_DISABLED,
+ 0,
"[EDAC] CPU err",
edac_dev);
if (res < 0) {
@@ -800,7 +800,7 @@
res = devm_request_irq(&pdev->dev,
pdata->irq,
mv64x60_mc_isr,
- IRQF_DISABLED,
+ 0,
"[EDAC] MC err",
mci);
if (res < 0) {
diff --git a/drivers/edac/ppc4xx_edac.c b/drivers/edac/ppc4xx_edac.c
index 0f04d5e..4159353 100644
--- a/drivers/edac/ppc4xx_edac.c
+++ b/drivers/edac/ppc4xx_edac.c
@@ -1120,7 +1120,7 @@
status = request_irq(ded_irq,
ppc4xx_edac_isr,
- IRQF_DISABLED,
+ 0,
"[EDAC] MC ECCDED",
mci);
@@ -1134,7 +1134,7 @@
status = request_irq(sec_irq,
ppc4xx_edac_isr,
- IRQF_DISABLED,
+ 0,
"[EDAC] MC ECCSEC",
mci);
diff --git a/drivers/edac/x38_edac.c b/drivers/edac/x38_edac.c
index e644b52..7c5cdc6 100644
--- a/drivers/edac/x38_edac.c
+++ b/drivers/edac/x38_edac.c
@@ -500,8 +500,7 @@
pci_unregister_driver(&x38_driver);
fail0:
- if (mci_pdev)
- pci_dev_put(mci_pdev);
+ pci_dev_put(mci_pdev);
return pci_rc;
}
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 0959ca9..23dfd5f 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -905,4 +905,16 @@
River Tech's viperboard.h for detailed meaning
of the module parameters.
+config GPIO_DLN2
+ tristate "Diolan DLN2 GPIO support"
+ depends on MFD_DLN2
+ select GPIOLIB_IRQCHIP
+
+ help
+ Select this option to enable GPIO driver for the Diolan DLN2
+ board.
+
+ This driver can also be built as a module. If so, the module
+ will be called gpio-dln2.
+
endif
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index e5d346c..e60677b 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -26,6 +26,7 @@
obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
obj-$(CONFIG_GPIO_DA9055) += gpio-da9055.o
obj-$(CONFIG_GPIO_DAVINCI) += gpio-davinci.o
+obj-$(CONFIG_GPIO_DLN2) += gpio-dln2.o
obj-$(CONFIG_GPIO_DWAPB) += gpio-dwapb.o
obj-$(CONFIG_GPIO_EM) += gpio-em.o
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
diff --git a/drivers/gpio/gpio-dln2.c b/drivers/gpio/gpio-dln2.c
new file mode 100644
index 0000000..978b51e
--- /dev/null
+++ b/drivers/gpio/gpio-dln2.c
@@ -0,0 +1,553 @@
+/*
+ * Driver for the Diolan DLN-2 USB-GPIO adapter
+ *
+ * Copyright (c) 2014 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/irqdomain.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/dln2.h>
+
+#define DLN2_GPIO_ID 0x01
+
+#define DLN2_GPIO_GET_PIN_COUNT DLN2_CMD(0x01, DLN2_GPIO_ID)
+#define DLN2_GPIO_SET_DEBOUNCE DLN2_CMD(0x04, DLN2_GPIO_ID)
+#define DLN2_GPIO_GET_DEBOUNCE DLN2_CMD(0x05, DLN2_GPIO_ID)
+#define DLN2_GPIO_PORT_GET_VAL DLN2_CMD(0x06, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_GET_VAL DLN2_CMD(0x0B, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_SET_OUT_VAL DLN2_CMD(0x0C, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_GET_OUT_VAL DLN2_CMD(0x0D, DLN2_GPIO_ID)
+#define DLN2_GPIO_CONDITION_MET_EV DLN2_CMD(0x0F, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_ENABLE DLN2_CMD(0x10, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_DISABLE DLN2_CMD(0x11, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_SET_DIRECTION DLN2_CMD(0x13, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_GET_DIRECTION DLN2_CMD(0x14, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_SET_EVENT_CFG DLN2_CMD(0x1E, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_GET_EVENT_CFG DLN2_CMD(0x1F, DLN2_GPIO_ID)
+
+#define DLN2_GPIO_EVENT_NONE 0
+#define DLN2_GPIO_EVENT_CHANGE 1
+#define DLN2_GPIO_EVENT_LVL_HIGH 2
+#define DLN2_GPIO_EVENT_LVL_LOW 3
+#define DLN2_GPIO_EVENT_CHANGE_RISING 0x11
+#define DLN2_GPIO_EVENT_CHANGE_FALLING 0x21
+#define DLN2_GPIO_EVENT_MASK 0x0F
+
+#define DLN2_GPIO_MAX_PINS 32
+
+struct dln2_irq_work {
+ struct work_struct work;
+ struct dln2_gpio *dln2;
+ int pin;
+ int type;
+};
+
+struct dln2_gpio {
+ struct platform_device *pdev;
+ struct gpio_chip gpio;
+
+ /*
+ * Cache pin direction to save us one transfer, since the hardware has
+ * separate commands to read the in and out values.
+ */
+ DECLARE_BITMAP(output_enabled, DLN2_GPIO_MAX_PINS);
+
+ DECLARE_BITMAP(irqs_masked, DLN2_GPIO_MAX_PINS);
+ DECLARE_BITMAP(irqs_enabled, DLN2_GPIO_MAX_PINS);
+ DECLARE_BITMAP(irqs_pending, DLN2_GPIO_MAX_PINS);
+ struct dln2_irq_work *irq_work;
+};
+
+struct dln2_gpio_pin {
+ __le16 pin;
+};
+
+struct dln2_gpio_pin_val {
+ __le16 pin __packed;
+ u8 value;
+};
+
+static int dln2_gpio_get_pin_count(struct platform_device *pdev)
+{
+ int ret;
+ __le16 count;
+ int len = sizeof(count);
+
+ ret = dln2_transfer_rx(pdev, DLN2_GPIO_GET_PIN_COUNT, &count, &len);
+ if (ret < 0)
+ return ret;
+ if (len < sizeof(count))
+ return -EPROTO;
+
+ return le16_to_cpu(count);
+}
+
+static int dln2_gpio_pin_cmd(struct dln2_gpio *dln2, int cmd, unsigned pin)
+{
+ struct dln2_gpio_pin req = {
+ .pin = cpu_to_le16(pin),
+ };
+
+ return dln2_transfer_tx(dln2->pdev, cmd, &req, sizeof(req));
+}
+
+static int dln2_gpio_pin_val(struct dln2_gpio *dln2, int cmd, unsigned int pin)
+{
+ int ret;
+ struct dln2_gpio_pin req = {
+ .pin = cpu_to_le16(pin),
+ };
+ struct dln2_gpio_pin_val rsp;
+ int len = sizeof(rsp);
+
+ ret = dln2_transfer(dln2->pdev, cmd, &req, sizeof(req), &rsp, &len);
+ if (ret < 0)
+ return ret;
+ if (len < sizeof(rsp) || req.pin != rsp.pin)
+ return -EPROTO;
+
+ return rsp.value;
+}
+
+static int dln2_gpio_pin_get_in_val(struct dln2_gpio *dln2, unsigned int pin)
+{
+ int ret;
+
+ ret = dln2_gpio_pin_val(dln2, DLN2_GPIO_PIN_GET_VAL, pin);
+ if (ret < 0)
+ return ret;
+ return !!ret;
+}
+
+static int dln2_gpio_pin_get_out_val(struct dln2_gpio *dln2, unsigned int pin)
+{
+ int ret;
+
+ ret = dln2_gpio_pin_val(dln2, DLN2_GPIO_PIN_GET_OUT_VAL, pin);
+ if (ret < 0)
+ return ret;
+ return !!ret;
+}
+
+static void dln2_gpio_pin_set_out_val(struct dln2_gpio *dln2,
+ unsigned int pin, int value)
+{
+ struct dln2_gpio_pin_val req = {
+ .pin = cpu_to_le16(pin),
+ .value = value,
+ };
+
+ dln2_transfer_tx(dln2->pdev, DLN2_GPIO_PIN_SET_OUT_VAL, &req,
+ sizeof(req));
+}
+
+#define DLN2_GPIO_DIRECTION_IN 0
+#define DLN2_GPIO_DIRECTION_OUT 1
+
+static int dln2_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+ struct dln2_gpio_pin req = {
+ .pin = cpu_to_le16(offset),
+ };
+ struct dln2_gpio_pin_val rsp;
+ int len = sizeof(rsp);
+ int ret;
+
+ ret = dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_ENABLE, offset);
+ if (ret < 0)
+ return ret;
+
+ /* cache the pin direction */
+ ret = dln2_transfer(dln2->pdev, DLN2_GPIO_PIN_GET_DIRECTION,
+ &req, sizeof(req), &rsp, &len);
+ if (ret < 0)
+ return ret;
+ if (len < sizeof(rsp) || req.pin != rsp.pin) {
+ ret = -EPROTO;
+ goto out_disable;
+ }
+
+ switch (rsp.value) {
+ case DLN2_GPIO_DIRECTION_IN:
+ clear_bit(offset, dln2->output_enabled);
+ return 0;
+ case DLN2_GPIO_DIRECTION_OUT:
+ set_bit(offset, dln2->output_enabled);
+ return 0;
+ default:
+ ret = -EPROTO;
+ goto out_disable;
+ }
+
+out_disable:
+ dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_DISABLE, offset);
+ return ret;
+}
+
+static void dln2_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+
+ dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_DISABLE, offset);
+}
+
+static int dln2_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+ struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+
+ if (test_bit(offset, dln2->output_enabled))
+ return GPIOF_DIR_OUT;
+
+ return GPIOF_DIR_IN;
+}
+
+static int dln2_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+ int dir;
+
+ dir = dln2_gpio_get_direction(chip, offset);
+ if (dir < 0)
+ return dir;
+
+ if (dir == GPIOF_DIR_IN)
+ return dln2_gpio_pin_get_in_val(dln2, offset);
+
+ return dln2_gpio_pin_get_out_val(dln2, offset);
+}
+
+static void dln2_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+
+ dln2_gpio_pin_set_out_val(dln2, offset, value);
+}
+
+static int dln2_gpio_set_direction(struct gpio_chip *chip, unsigned offset,
+ unsigned dir)
+{
+ struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+ struct dln2_gpio_pin_val req = {
+ .pin = cpu_to_le16(offset),
+ .value = dir,
+ };
+ int ret;
+
+ ret = dln2_transfer_tx(dln2->pdev, DLN2_GPIO_PIN_SET_DIRECTION,
+ &req, sizeof(req));
+ if (ret < 0)
+ return ret;
+
+ if (dir == DLN2_GPIO_DIRECTION_OUT)
+ set_bit(offset, dln2->output_enabled);
+ else
+ clear_bit(offset, dln2->output_enabled);
+
+ return ret;
+}
+
+static int dln2_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ return dln2_gpio_set_direction(chip, offset, DLN2_GPIO_DIRECTION_IN);
+}
+
+static int dln2_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ return dln2_gpio_set_direction(chip, offset, DLN2_GPIO_DIRECTION_OUT);
+}
+
+static int dln2_gpio_set_debounce(struct gpio_chip *chip, unsigned offset,
+ unsigned debounce)
+{
+ struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+ __le32 duration = cpu_to_le32(debounce);
+
+ return dln2_transfer_tx(dln2->pdev, DLN2_GPIO_SET_DEBOUNCE,
+ &duration, sizeof(duration));
+}
+
+static int dln2_gpio_set_event_cfg(struct dln2_gpio *dln2, unsigned pin,
+ unsigned type, unsigned period)
+{
+ struct {
+ __le16 pin;
+ u8 type;
+ __le16 period;
+ } __packed req = {
+ .pin = cpu_to_le16(pin),
+ .type = type,
+ .period = cpu_to_le16(period),
+ };
+
+ return dln2_transfer_tx(dln2->pdev, DLN2_GPIO_PIN_SET_EVENT_CFG,
+ &req, sizeof(req));
+}
+
+static void dln2_irq_work(struct work_struct *w)
+{
+ struct dln2_irq_work *iw = container_of(w, struct dln2_irq_work, work);
+ struct dln2_gpio *dln2 = iw->dln2;
+ u8 type = iw->type & DLN2_GPIO_EVENT_MASK;
+
+ if (test_bit(iw->pin, dln2->irqs_enabled))
+ dln2_gpio_set_event_cfg(dln2, iw->pin, type, 0);
+ else
+ dln2_gpio_set_event_cfg(dln2, iw->pin, DLN2_GPIO_EVENT_NONE, 0);
+}
+
+static void dln2_irq_enable(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio);
+ int pin = irqd_to_hwirq(irqd);
+
+ set_bit(pin, dln2->irqs_enabled);
+ schedule_work(&dln2->irq_work[pin].work);
+}
+
+static void dln2_irq_disable(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio);
+ int pin = irqd_to_hwirq(irqd);
+
+ clear_bit(pin, dln2->irqs_enabled);
+ schedule_work(&dln2->irq_work[pin].work);
+}
+
+static void dln2_irq_mask(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio);
+ int pin = irqd_to_hwirq(irqd);
+
+ set_bit(pin, dln2->irqs_masked);
+}
+
+static void dln2_irq_unmask(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio);
+ struct device *dev = dln2->gpio.dev;
+ int pin = irqd_to_hwirq(irqd);
+
+ if (test_and_clear_bit(pin, dln2->irqs_pending)) {
+ int irq;
+
+ irq = irq_find_mapping(dln2->gpio.irqdomain, pin);
+ if (!irq) {
+ dev_err(dev, "pin %d not mapped to IRQ\n", pin);
+ return;
+ }
+
+ generic_handle_irq(irq);
+ }
+}
+
+static int dln2_irq_set_type(struct irq_data *irqd, unsigned type)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio);
+ int pin = irqd_to_hwirq(irqd);
+
+ switch (type) {
+ case IRQ_TYPE_LEVEL_HIGH:
+ dln2->irq_work[pin].type = DLN2_GPIO_EVENT_LVL_HIGH;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ dln2->irq_work[pin].type = DLN2_GPIO_EVENT_LVL_LOW;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ dln2->irq_work[pin].type = DLN2_GPIO_EVENT_CHANGE;
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ dln2->irq_work[pin].type = DLN2_GPIO_EVENT_CHANGE_RISING;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ dln2->irq_work[pin].type = DLN2_GPIO_EVENT_CHANGE_FALLING;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct irq_chip dln2_gpio_irqchip = {
+ .name = "dln2-irq",
+ .irq_enable = dln2_irq_enable,
+ .irq_disable = dln2_irq_disable,
+ .irq_mask = dln2_irq_mask,
+ .irq_unmask = dln2_irq_unmask,
+ .irq_set_type = dln2_irq_set_type,
+};
+
+static void dln2_gpio_event(struct platform_device *pdev, u16 echo,
+ const void *data, int len)
+{
+ int pin, irq;
+ const struct {
+ __le16 count;
+ __u8 type;
+ __le16 pin;
+ __u8 value;
+ } __packed *event = data;
+ struct dln2_gpio *dln2 = platform_get_drvdata(pdev);
+
+ if (len < sizeof(*event)) {
+ dev_err(dln2->gpio.dev, "short event message\n");
+ return;
+ }
+
+ pin = le16_to_cpu(event->pin);
+ if (pin >= dln2->gpio.ngpio) {
+ dev_err(dln2->gpio.dev, "out of bounds pin %d\n", pin);
+ return;
+ }
+
+ irq = irq_find_mapping(dln2->gpio.irqdomain, pin);
+ if (!irq) {
+ dev_err(dln2->gpio.dev, "pin %d not mapped to IRQ\n", pin);
+ return;
+ }
+
+ if (!test_bit(pin, dln2->irqs_enabled))
+ return;
+ if (test_bit(pin, dln2->irqs_masked)) {
+ set_bit(pin, dln2->irqs_pending);
+ return;
+ }
+
+ switch (dln2->irq_work[pin].type) {
+ case DLN2_GPIO_EVENT_CHANGE_RISING:
+ if (event->value)
+ generic_handle_irq(irq);
+ break;
+ case DLN2_GPIO_EVENT_CHANGE_FALLING:
+ if (!event->value)
+ generic_handle_irq(irq);
+ break;
+ default:
+ generic_handle_irq(irq);
+ }
+}
+
+static int dln2_gpio_probe(struct platform_device *pdev)
+{
+ struct dln2_gpio *dln2;
+ struct device *dev = &pdev->dev;
+ int pins;
+ int i, ret;
+
+ pins = dln2_gpio_get_pin_count(pdev);
+ if (pins < 0) {
+ dev_err(dev, "failed to get pin count: %d\n", pins);
+ return pins;
+ }
+ if (pins > DLN2_GPIO_MAX_PINS) {
+ pins = DLN2_GPIO_MAX_PINS;
+ dev_warn(dev, "clamping pins to %d\n", DLN2_GPIO_MAX_PINS);
+ }
+
+ dln2 = devm_kzalloc(&pdev->dev, sizeof(*dln2), GFP_KERNEL);
+ if (!dln2)
+ return -ENOMEM;
+
+ dln2->irq_work = devm_kcalloc(&pdev->dev, pins,
+ sizeof(struct dln2_irq_work), GFP_KERNEL);
+ if (!dln2->irq_work)
+ return -ENOMEM;
+ for (i = 0; i < pins; i++) {
+ INIT_WORK(&dln2->irq_work[i].work, dln2_irq_work);
+ dln2->irq_work[i].pin = i;
+ dln2->irq_work[i].dln2 = dln2;
+ }
+
+ dln2->pdev = pdev;
+
+ dln2->gpio.label = "dln2";
+ dln2->gpio.dev = dev;
+ dln2->gpio.owner = THIS_MODULE;
+ dln2->gpio.base = -1;
+ dln2->gpio.ngpio = pins;
+ dln2->gpio.exported = true;
+ dln2->gpio.can_sleep = true;
+ dln2->gpio.irq_not_threaded = true;
+ dln2->gpio.set = dln2_gpio_set;
+ dln2->gpio.get = dln2_gpio_get;
+ dln2->gpio.request = dln2_gpio_request;
+ dln2->gpio.free = dln2_gpio_free;
+ dln2->gpio.get_direction = dln2_gpio_get_direction;
+ dln2->gpio.direction_input = dln2_gpio_direction_input;
+ dln2->gpio.direction_output = dln2_gpio_direction_output;
+ dln2->gpio.set_debounce = dln2_gpio_set_debounce;
+
+ platform_set_drvdata(pdev, dln2);
+
+ ret = gpiochip_add(&dln2->gpio);
+ if (ret < 0) {
+ dev_err(dev, "failed to add gpio chip: %d\n", ret);
+ goto out;
+ }
+
+ ret = gpiochip_irqchip_add(&dln2->gpio, &dln2_gpio_irqchip, 0,
+ handle_simple_irq, IRQ_TYPE_NONE);
+ if (ret < 0) {
+ dev_err(dev, "failed to add irq chip: %d\n", ret);
+ goto out_gpiochip_remove;
+ }
+
+ ret = dln2_register_event_cb(pdev, DLN2_GPIO_CONDITION_MET_EV,
+ dln2_gpio_event);
+ if (ret) {
+ dev_err(dev, "failed to register event cb: %d\n", ret);
+ goto out_gpiochip_remove;
+ }
+
+ return 0;
+
+out_gpiochip_remove:
+ gpiochip_remove(&dln2->gpio);
+out:
+ return ret;
+}
+
+static int dln2_gpio_remove(struct platform_device *pdev)
+{
+ struct dln2_gpio *dln2 = platform_get_drvdata(pdev);
+ int i;
+
+ dln2_unregister_event_cb(pdev, DLN2_GPIO_CONDITION_MET_EV);
+ for (i = 0; i < dln2->gpio.ngpio; i++)
+ flush_work(&dln2->irq_work[i].work);
+ gpiochip_remove(&dln2->gpio);
+
+ return 0;
+}
+
+static struct platform_driver dln2_gpio_driver = {
+ .driver.name = "dln2-gpio",
+ .probe = dln2_gpio_probe,
+ .remove = dln2_gpio_remove,
+};
+
+module_platform_driver(dln2_gpio_driver);
+
+MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com");
+MODULE_DESCRIPTION("Driver for the Diolan DLN2 GPIO interface");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:dln2-gpio");
diff --git a/drivers/gpio/gpio-tc3589x.c b/drivers/gpio/gpio-tc3589x.c
index ae0f646..abdcf58 100644
--- a/drivers/gpio/gpio-tc3589x.c
+++ b/drivers/gpio/gpio-tc3589x.c
@@ -262,7 +262,7 @@
tc3589x_gpio->chip = template_chip;
tc3589x_gpio->chip.ngpio = tc3589x->num_gpio;
tc3589x_gpio->chip.dev = &pdev->dev;
- tc3589x_gpio->chip.base = (pdata) ? pdata->gpio_base : -1;
+ tc3589x_gpio->chip.base = -1;
#ifdef CONFIG_OF_GPIO
tc3589x_gpio->chip.of_node = np;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 8bcdb98..9cb5c95 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4325,7 +4325,6 @@
ironlake_fdi_disable(crtc);
ironlake_disable_pch_transcoder(dev_priv, pipe);
- intel_set_pch_fifo_underrun_reporting(dev, pipe, true);
if (HAS_PCH_CPT(dev)) {
/* disable TRANS_DP_CTL */
@@ -4389,7 +4388,6 @@
if (intel_crtc->config.has_pch_encoder) {
lpt_disable_pch_transcoder(dev_priv);
- intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A, true);
intel_ddi_fdi_disable(crtc);
}
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index a6bd142..c0bbf21 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -899,6 +899,17 @@
int pipe;
u8 pin;
+ /*
+ * Unlock registers and just leave them unlocked. Do this before
+ * checking quirk lists to avoid bogus WARNINGs.
+ */
+ if (HAS_PCH_SPLIT(dev)) {
+ I915_WRITE(PCH_PP_CONTROL,
+ I915_READ(PCH_PP_CONTROL) | PANEL_UNLOCK_REGS);
+ } else {
+ I915_WRITE(PP_CONTROL,
+ I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS);
+ }
if (!intel_lvds_supported(dev))
return;
@@ -1097,17 +1108,6 @@
lvds_encoder->a3_power = I915_READ(lvds_encoder->reg) &
LVDS_A3_POWER_MASK;
- /*
- * Unlock registers and just
- * leave them unlocked
- */
- if (HAS_PCH_SPLIT(dev)) {
- I915_WRITE(PCH_PP_CONTROL,
- I915_READ(PCH_PP_CONTROL) | PANEL_UNLOCK_REGS);
- } else {
- I915_WRITE(PP_CONTROL,
- I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS);
- }
lvds_connector->lid_notifier.notifier_call = intel_lid_notify;
if (acpi_lid_notifier_register(&lvds_connector->lid_notifier)) {
DRM_DEBUG_KMS("lid notifier registration failed\n");
diff --git a/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c b/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c
index cd05677..72a40f9 100644
--- a/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c
+++ b/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c
@@ -218,7 +218,6 @@
device->oclass[NVDEV_ENGINE_BSP ] = &nvc0_bsp_oclass;
device->oclass[NVDEV_ENGINE_PPP ] = &nvc0_ppp_oclass;
device->oclass[NVDEV_ENGINE_COPY0 ] = &nvc0_copy0_oclass;
- device->oclass[NVDEV_ENGINE_COPY1 ] = &nvc0_copy1_oclass;
device->oclass[NVDEV_ENGINE_DISP ] = nva3_disp_oclass;
device->oclass[NVDEV_ENGINE_PERFMON] = &nvc0_perfmon_oclass;
break;
diff --git a/drivers/gpu/drm/nouveau/core/engine/fifo/nv04.c b/drivers/gpu/drm/nouveau/core/engine/fifo/nv04.c
index 5ae6a43..1931057 100644
--- a/drivers/gpu/drm/nouveau/core/engine/fifo/nv04.c
+++ b/drivers/gpu/drm/nouveau/core/engine/fifo/nv04.c
@@ -551,8 +551,8 @@
}
if (status & 0x40000000) {
- nouveau_fifo_uevent(&priv->base);
nv_wr32(priv, 0x002100, 0x40000000);
+ nouveau_fifo_uevent(&priv->base);
status &= ~0x40000000;
}
}
diff --git a/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c b/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c
index 1fe1f8f..074d434 100644
--- a/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c
+++ b/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c
@@ -740,6 +740,8 @@
u32 inte = nv_rd32(priv, 0x002628);
u32 unkn;
+ nv_wr32(priv, 0x0025a8 + (engn * 0x04), intr);
+
for (unkn = 0; unkn < 8; unkn++) {
u32 ints = (intr >> (unkn * 0x04)) & inte;
if (ints & 0x1) {
@@ -751,8 +753,6 @@
nv_mask(priv, 0x002628, ints, 0);
}
}
-
- nv_wr32(priv, 0x0025a8 + (engn * 0x04), intr);
}
static void
diff --git a/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c b/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c
index d2f0fd3..f8734eb 100644
--- a/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c
+++ b/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c
@@ -952,8 +952,8 @@
}
if (stat & 0x80000000) {
- nve0_fifo_intr_engine(priv);
nv_wr32(priv, 0x002100, 0x80000000);
+ nve0_fifo_intr_engine(priv);
stat &= ~0x80000000;
}
diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c
index 5723807..62b97c4 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -629,7 +629,6 @@
pci_save_state(pdev);
pci_disable_device(pdev);
- pci_ignore_hotplug(pdev);
pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
@@ -933,6 +932,7 @@
ret = nouveau_do_suspend(drm_dev, true);
pci_save_state(pdev);
pci_disable_device(pdev);
+ pci_ignore_hotplug(pdev);
pci_set_power_state(pdev, PCI_D3cold);
drm_dev->switch_power_state = DRM_SWITCH_POWER_DYNAMIC_OFF;
return ret;
diff --git a/drivers/gpu/drm/nouveau/nouveau_fence.c b/drivers/gpu/drm/nouveau/nouveau_fence.c
index 515cd9a..f32a434 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fence.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fence.c
@@ -52,20 +52,24 @@
return container_of(fence->base.lock, struct nouveau_fence_chan, lock);
}
-static void
+static int
nouveau_fence_signal(struct nouveau_fence *fence)
{
+ int drop = 0;
+
fence_signal_locked(&fence->base);
list_del(&fence->head);
+ rcu_assign_pointer(fence->channel, NULL);
if (test_bit(FENCE_FLAG_USER_BITS, &fence->base.flags)) {
struct nouveau_fence_chan *fctx = nouveau_fctx(fence);
if (!--fctx->notify_ref)
- nvif_notify_put(&fctx->notify);
+ drop = 1;
}
fence_put(&fence->base);
+ return drop;
}
static struct nouveau_fence *
@@ -88,16 +92,23 @@
{
struct nouveau_fence *fence;
- nvif_notify_fini(&fctx->notify);
-
spin_lock_irq(&fctx->lock);
while (!list_empty(&fctx->pending)) {
fence = list_entry(fctx->pending.next, typeof(*fence), head);
- nouveau_fence_signal(fence);
- fence->channel = NULL;
+ if (nouveau_fence_signal(fence))
+ nvif_notify_put(&fctx->notify);
}
spin_unlock_irq(&fctx->lock);
+
+ nvif_notify_fini(&fctx->notify);
+ fctx->dead = 1;
+
+ /*
+ * Ensure that all accesses to fence->channel complete before freeing
+ * the channel.
+ */
+ synchronize_rcu();
}
static void
@@ -112,21 +123,23 @@
kref_put(&fctx->fence_ref, nouveau_fence_context_put);
}
-static void
+static int
nouveau_fence_update(struct nouveau_channel *chan, struct nouveau_fence_chan *fctx)
{
struct nouveau_fence *fence;
-
+ int drop = 0;
u32 seq = fctx->read(chan);
while (!list_empty(&fctx->pending)) {
fence = list_entry(fctx->pending.next, typeof(*fence), head);
if ((int)(seq - fence->base.seqno) < 0)
- return;
+ break;
- nouveau_fence_signal(fence);
+ drop |= nouveau_fence_signal(fence);
}
+
+ return drop;
}
static int
@@ -135,18 +148,21 @@
struct nouveau_fence_chan *fctx =
container_of(notify, typeof(*fctx), notify);
unsigned long flags;
+ int ret = NVIF_NOTIFY_KEEP;
spin_lock_irqsave(&fctx->lock, flags);
if (!list_empty(&fctx->pending)) {
struct nouveau_fence *fence;
+ struct nouveau_channel *chan;
fence = list_entry(fctx->pending.next, typeof(*fence), head);
- nouveau_fence_update(fence->channel, fctx);
+ chan = rcu_dereference_protected(fence->channel, lockdep_is_held(&fctx->lock));
+ if (nouveau_fence_update(fence->channel, fctx))
+ ret = NVIF_NOTIFY_DROP;
}
spin_unlock_irqrestore(&fctx->lock, flags);
- /* Always return keep here. NVIF refcount is handled with nouveau_fence_update */
- return NVIF_NOTIFY_KEEP;
+ return ret;
}
void
@@ -262,7 +278,10 @@
if (!ret) {
fence_get(&fence->base);
spin_lock_irq(&fctx->lock);
- nouveau_fence_update(chan, fctx);
+
+ if (nouveau_fence_update(chan, fctx))
+ nvif_notify_put(&fctx->notify);
+
list_add_tail(&fence->head, &fctx->pending);
spin_unlock_irq(&fctx->lock);
}
@@ -276,13 +295,16 @@
if (fence->base.ops == &nouveau_fence_ops_legacy ||
fence->base.ops == &nouveau_fence_ops_uevent) {
struct nouveau_fence_chan *fctx = nouveau_fctx(fence);
+ struct nouveau_channel *chan;
unsigned long flags;
if (test_bit(FENCE_FLAG_SIGNALED_BIT, &fence->base.flags))
return true;
spin_lock_irqsave(&fctx->lock, flags);
- nouveau_fence_update(fence->channel, fctx);
+ chan = rcu_dereference_protected(fence->channel, lockdep_is_held(&fctx->lock));
+ if (chan && nouveau_fence_update(chan, fctx))
+ nvif_notify_put(&fctx->notify);
spin_unlock_irqrestore(&fctx->lock, flags);
}
return fence_is_signaled(&fence->base);
@@ -387,12 +409,18 @@
if (fence && (!exclusive || !fobj || !fobj->shared_count)) {
struct nouveau_channel *prev = NULL;
+ bool must_wait = true;
f = nouveau_local_fence(fence, chan->drm);
- if (f)
- prev = f->channel;
+ if (f) {
+ rcu_read_lock();
+ prev = rcu_dereference(f->channel);
+ if (prev && (prev == chan || fctx->sync(f, prev, chan) == 0))
+ must_wait = false;
+ rcu_read_unlock();
+ }
- if (!prev || (prev != chan && (ret = fctx->sync(f, prev, chan))))
+ if (must_wait)
ret = fence_wait(fence, intr);
return ret;
@@ -403,19 +431,22 @@
for (i = 0; i < fobj->shared_count && !ret; ++i) {
struct nouveau_channel *prev = NULL;
+ bool must_wait = true;
fence = rcu_dereference_protected(fobj->shared[i],
reservation_object_held(resv));
f = nouveau_local_fence(fence, chan->drm);
- if (f)
- prev = f->channel;
+ if (f) {
+ rcu_read_lock();
+ prev = rcu_dereference(f->channel);
+ if (prev && (prev == chan || fctx->sync(f, prev, chan) == 0))
+ must_wait = false;
+ rcu_read_unlock();
+ }
- if (!prev || (prev != chan && (ret = fctx->sync(f, prev, chan))))
+ if (must_wait)
ret = fence_wait(fence, intr);
-
- if (ret)
- break;
}
return ret;
@@ -463,7 +494,7 @@
struct nouveau_fence *fence = from_fence(f);
struct nouveau_fence_chan *fctx = nouveau_fctx(fence);
- return fence->channel ? fctx->name : "dead channel";
+ return !fctx->dead ? fctx->name : "dead channel";
}
/*
@@ -476,9 +507,16 @@
{
struct nouveau_fence *fence = from_fence(f);
struct nouveau_fence_chan *fctx = nouveau_fctx(fence);
- struct nouveau_channel *chan = fence->channel;
+ struct nouveau_channel *chan;
+ bool ret = false;
- return (int)(fctx->read(chan) - fence->base.seqno) >= 0;
+ rcu_read_lock();
+ chan = rcu_dereference(fence->channel);
+ if (chan)
+ ret = (int)(fctx->read(chan) - fence->base.seqno) >= 0;
+ rcu_read_unlock();
+
+ return ret;
}
static bool nouveau_fence_no_signaling(struct fence *f)
diff --git a/drivers/gpu/drm/nouveau/nouveau_fence.h b/drivers/gpu/drm/nouveau/nouveau_fence.h
index 943b0b1..96e461c 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fence.h
+++ b/drivers/gpu/drm/nouveau/nouveau_fence.h
@@ -14,7 +14,7 @@
bool sysmem;
- struct nouveau_channel *channel;
+ struct nouveau_channel __rcu *channel;
unsigned long timeout;
};
@@ -47,7 +47,7 @@
char name[32];
struct nvif_notify notify;
- int notify_ref;
+ int notify_ref, dead;
};
struct nouveau_fence_priv {
diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c
index a3e7aed..6f377de 100644
--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -251,22 +251,19 @@
static int radeon_cs_sync_rings(struct radeon_cs_parser *p)
{
- int i, r = 0;
+ struct radeon_cs_reloc *reloc;
+ int r;
- for (i = 0; i < p->nrelocs; i++) {
+ list_for_each_entry(reloc, &p->validated, tv.head) {
struct reservation_object *resv;
- if (!p->relocs[i].robj)
- continue;
-
- resv = p->relocs[i].robj->tbo.resv;
+ resv = reloc->robj->tbo.resv;
r = radeon_semaphore_sync_resv(p->rdev, p->ib.semaphore, resv,
- p->relocs[i].tv.shared);
-
+ reloc->tv.shared);
if (r)
- break;
+ return r;
}
- return r;
+ return 0;
}
/* XXX: note that this is called from the legacy UMS CS ioctl as well */
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 8309b11..0358676 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -795,6 +795,8 @@
/* Get associated drm_crtc: */
drmcrtc = &rdev->mode_info.crtcs[crtc]->base;
+ if (!drmcrtc)
+ return -EINVAL;
/* Helper routine in DRM core does all the work: */
return drm_calc_vbltimestamp_from_scanoutpos(dev, crtc, max_error,
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index 99a960a..4c0d786 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -213,6 +213,13 @@
if (!(rdev->flags & RADEON_IS_PCIE))
bo->flags &= ~(RADEON_GEM_GTT_WC | RADEON_GEM_GTT_UC);
+#ifdef CONFIG_X86_32
+ /* XXX: Write-combined CPU mappings of GTT seem broken on 32-bit
+ * See https://bugs.freedesktop.org/show_bug.cgi?id=84627
+ */
+ bo->flags &= ~RADEON_GEM_GTT_WC;
+#endif
+
radeon_ttm_placement_from_domain(bo, domain);
/* Kernel allocation are uninterruptible */
down_read(&rdev->pm.mclk_lock);
diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c
index e6d8e18..6a58b6c 100644
--- a/drivers/hid/hid-sensor-hub.c
+++ b/drivers/hid/hid-sensor-hub.c
@@ -641,9 +641,6 @@
goto err_stop_hw;
}
sd->hid_sensor_hub_client_devs[
- sd->hid_sensor_client_cnt].id =
- PLATFORM_DEVID_AUTO;
- sd->hid_sensor_hub_client_devs[
sd->hid_sensor_client_cnt].name = name;
sd->hid_sensor_hub_client_devs[
sd->hid_sensor_client_cnt].platform_data =
@@ -659,8 +656,9 @@
if (last_hsdev)
last_hsdev->end_collection_index = i;
- ret = mfd_add_devices(&hdev->dev, 0, sd->hid_sensor_hub_client_devs,
- sd->hid_sensor_client_cnt, NULL, 0, NULL);
+ ret = mfd_add_hotplug_devices(&hdev->dev,
+ sd->hid_sensor_hub_client_devs,
+ sd->hid_sensor_client_cnt);
if (ret < 0)
goto err_stop_hw;
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 5286d7c..6529c09 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1028,11 +1028,11 @@
will be called lm93.
config SENSORS_LM95234
- tristate "National Semiconductor LM95234"
+ tristate "National Semiconductor LM95234 and compatibles"
depends on I2C
help
- If you say yes here you get support for the LM95234 temperature
- sensor.
+ If you say yes here you get support for the LM95233 and LM95234
+ temperature sensor chips.
This driver can also be built as a module. If so, the module
will be called lm95234.
@@ -1048,10 +1048,11 @@
will be called lm95241.
config SENSORS_LM95245
- tristate "National Semiconductor LM95245 sensor chip"
+ tristate "National Semiconductor LM95245 and compatibles"
depends on I2C
help
- If you say yes here you get support for LM95245 sensor chip.
+ If you say yes here you get support for LM95235 and LM95245
+ temperature sensor chips.
This driver can also be built as a module. If so, the module
will be called lm95245.
@@ -1117,12 +1118,23 @@
help
If you say yes here you get support for the hardware monitoring
functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D,
- NCT6791D and compatible Super-I/O chips. This driver replaces the
- w83627ehf driver for NCT6775F and NCT6776F.
+ NCT6791D, NCT6792D and compatible Super-I/O chips. This driver
+ replaces the w83627ehf driver for NCT6775F and NCT6776F.
This driver can also be built as a module. If so, the module
will be called nct6775.
+config SENSORS_NCT7802
+ tristate "Nuvoton NCT7802Y"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ If you say yes here you get support for the Nuvoton NCT7802Y
+ hardware monitoring chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called nct7802.
+
config SENSORS_PCF8591
tristate "Philips PCF8591 ADC/DAC"
depends on I2C
@@ -1454,7 +1466,7 @@
depends on I2C
help
If you say yes here you get support for Texas Instruments TMP401,
- TMP411, TMP431, and TMP432 temperature sensor chips.
+ TMP411, TMP431, TMP432 and TMP435 temperature sensor chips.
This driver can also be built as a module. If so, the module
will be called tmp401.
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index c90a761..6728064 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -118,6 +118,7 @@
obj-$(CONFIG_SENSORS_MENF21BMC_HWMON) += menf21bmc_hwmon.o
obj-$(CONFIG_SENSORS_NCT6683) += nct6683.o
obj-$(CONFIG_SENSORS_NCT6775) += nct6775.o
+obj-$(CONFIG_SENSORS_NCT7802) += nct7802.o
obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c
index 4efa173..36abf81 100644
--- a/drivers/hwmon/gpio-fan.c
+++ b/drivers/hwmon/gpio-fan.c
@@ -79,7 +79,7 @@
{
struct gpio_fan_data *fan_data = dev_get_drvdata(dev);
struct gpio_fan_alarm *alarm = fan_data->alarm;
- int value = gpio_get_value(alarm->gpio);
+ int value = gpio_get_value_cansleep(alarm->gpio);
if (alarm->active_low)
value = !value;
@@ -131,7 +131,7 @@
int i;
for (i = 0; i < fan_data->num_ctrl; i++)
- gpio_set_value(fan_data->ctrl[i], (ctrl_val >> i) & 1);
+ gpio_set_value_cansleep(fan_data->ctrl[i], (ctrl_val >> i) & 1);
}
static int __get_fan_ctrl(struct gpio_fan_data *fan_data)
@@ -142,7 +142,7 @@
for (i = 0; i < fan_data->num_ctrl; i++) {
int value;
- value = gpio_get_value(fan_data->ctrl[i]);
+ value = gpio_get_value_cansleep(fan_data->ctrl[i]);
ctrl_val |= (value << i);
}
return ctrl_val;
@@ -369,7 +369,8 @@
if (err)
return err;
- err = gpio_direction_output(ctrl[i], gpio_get_value(ctrl[i]));
+ err = gpio_direction_output(ctrl[i],
+ gpio_get_value_cansleep(ctrl[i]));
if (err)
return err;
}
@@ -549,6 +550,14 @@
return 0;
}
+static void gpio_fan_shutdown(struct platform_device *pdev)
+{
+ struct gpio_fan_data *fan_data = dev_get_drvdata(&pdev->dev);
+
+ if (fan_data->ctrl)
+ set_fan_speed(fan_data, 0);
+}
+
#ifdef CONFIG_PM_SLEEP
static int gpio_fan_suspend(struct device *dev)
{
@@ -580,6 +589,7 @@
static struct platform_driver gpio_fan_driver = {
.probe = gpio_fan_probe,
+ .shutdown = gpio_fan_shutdown,
.driver = {
.name = "gpio-fan",
.pm = GPIO_FAN_PM,
diff --git a/drivers/hwmon/ibmpowernv.c b/drivers/hwmon/ibmpowernv.c
index 6a30eee..7c2c7be 100644
--- a/drivers/hwmon/ibmpowernv.c
+++ b/drivers/hwmon/ibmpowernv.c
@@ -74,9 +74,6 @@
u32 sensors_count; /* Total count of sensors from each group */
};
-/* Platform device representing all the ibmpowernv sensors */
-static struct platform_device *pdevice;
-
static ssize_t show_sensor(struct device *dev, struct device_attribute *devattr,
char *buf)
{
@@ -99,7 +96,7 @@
return sprintf(buf, "%u\n", x);
}
-static int __init get_sensor_index_attr(const char *name, u32 *index,
+static int get_sensor_index_attr(const char *name, u32 *index,
char *attr)
{
char *hash_pos = strchr(name, '#');
@@ -136,7 +133,7 @@
* which need to be mapped as fan2_input, temp1_max respectively before
* populating them inside hwmon device class.
*/
-static int __init create_hwmon_attr_name(struct device *dev, enum sensors type,
+static int create_hwmon_attr_name(struct device *dev, enum sensors type,
const char *node_name,
char *hwmon_attr_name)
{
@@ -172,7 +169,7 @@
return 0;
}
-static int __init populate_attr_groups(struct platform_device *pdev)
+static int populate_attr_groups(struct platform_device *pdev)
{
struct platform_data *pdata = platform_get_drvdata(pdev);
const struct attribute_group **pgroups = pdata->attr_groups;
@@ -180,11 +177,6 @@
enum sensors type;
opal = of_find_node_by_path("/ibm,opal/sensors");
- if (!opal) {
- dev_dbg(&pdev->dev, "Opal node 'sensors' not found\n");
- return -ENODEV;
- }
-
for_each_child_of_node(opal, np) {
if (np->name == NULL)
continue;
@@ -221,7 +213,7 @@
* to the name required by the higher 'hwmon' driver like fan1_input, temp1_max
* etc..
*/
-static int __init create_device_attrs(struct platform_device *pdev)
+static int create_device_attrs(struct platform_device *pdev)
{
struct platform_data *pdata = platform_get_drvdata(pdev);
const struct attribute_group **pgroups = pdata->attr_groups;
@@ -280,7 +272,7 @@
return err;
}
-static int __init ibmpowernv_probe(struct platform_device *pdev)
+static int ibmpowernv_probe(struct platform_device *pdev)
{
struct platform_data *pdata;
struct device *hwmon_dev;
@@ -309,57 +301,25 @@
return PTR_ERR_OR_ZERO(hwmon_dev);
}
+static const struct platform_device_id opal_sensor_driver_ids[] = {
+ {
+ .name = "opal-sensor",
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, opal_sensor_driver_ids);
+
static struct platform_driver ibmpowernv_driver = {
- .driver = {
- .owner = THIS_MODULE,
- .name = DRVNAME,
+ .probe = ibmpowernv_probe,
+ .id_table = opal_sensor_driver_ids,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRVNAME,
},
};
-static int __init ibmpowernv_init(void)
-{
- int err;
-
- pdevice = platform_device_alloc(DRVNAME, 0);
- if (!pdevice) {
- pr_err("Device allocation failed\n");
- err = -ENOMEM;
- goto exit;
- }
-
- err = platform_device_add(pdevice);
- if (err) {
- pr_err("Device addition failed (%d)\n", err);
- goto exit_device_put;
- }
-
- err = platform_driver_probe(&ibmpowernv_driver, ibmpowernv_probe);
- if (err) {
- if (err != -ENODEV)
- pr_err("Platform driver probe failed (%d)\n", err);
-
- goto exit_device_del;
- }
-
- return 0;
-
-exit_device_del:
- platform_device_del(pdevice);
-exit_device_put:
- platform_device_put(pdevice);
-exit:
- return err;
-}
-
-static void __exit ibmpowernv_exit(void)
-{
- platform_driver_unregister(&ibmpowernv_driver);
- platform_device_unregister(pdevice);
-}
+module_platform_driver(ibmpowernv_driver);
MODULE_AUTHOR("Neelesh Gupta <neelegup@linux.vnet.ibm.com>");
MODULE_DESCRIPTION("IBM POWERNV platform sensors");
MODULE_LICENSE("GPL");
-
-module_init(ibmpowernv_init);
-module_exit(ibmpowernv_exit);
diff --git a/drivers/hwmon/iio_hwmon.c b/drivers/hwmon/iio_hwmon.c
index 14c82da..9801756 100644
--- a/drivers/hwmon/iio_hwmon.c
+++ b/drivers/hwmon/iio_hwmon.c
@@ -63,7 +63,7 @@
struct iio_hwmon_state *st;
struct sensor_device_attribute *a;
int ret, i;
- int in_i = 1, temp_i = 1, curr_i = 1;
+ int in_i = 1, temp_i = 1, curr_i = 1, humidity_i = 1;
enum iio_chan_type type;
struct iio_channel *channels;
const char *name = "iio_hwmon";
@@ -123,6 +123,11 @@
"curr%d_input",
curr_i++);
break;
+ case IIO_HUMIDITYRELATIVE:
+ a->dev_attr.attr.name = kasprintf(GFP_KERNEL,
+ "humidity%d_input",
+ humidity_i++);
+ break;
default:
ret = -EINVAL;
goto error_release_channels;
diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
index bfd3f3e..e01feba 100644
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -223,6 +223,7 @@
struct device *hwmon_dev;
long shunt = 10000; /* default shunt value 10mOhms */
u32 val;
+ int ret;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
return -ENODEV;
@@ -247,12 +248,25 @@
data->config = &ina2xx_config[data->kind];
/* device configuration */
- i2c_smbus_write_word_swapped(client, INA2XX_CONFIG,
- data->config->config_default);
- /* set current LSB to 1mA, shunt is in uOhms */
- /* (equation 13 in datasheet) */
- i2c_smbus_write_word_swapped(client, INA2XX_CALIBRATION,
- data->config->calibration_factor / shunt);
+ ret = i2c_smbus_write_word_swapped(client, INA2XX_CONFIG,
+ data->config->config_default);
+ if (ret < 0) {
+ dev_err(dev,
+ "error writing to the config register: %d", ret);
+ return -ENODEV;
+ }
+
+ /*
+ * Set current LSB to 1mA, shunt is in uOhms
+ * (equation 13 in datasheet).
+ */
+ ret = i2c_smbus_write_word_swapped(client, INA2XX_CALIBRATION,
+ data->config->calibration_factor / shunt);
+ if (ret < 0) {
+ dev_err(dev,
+ "error writing to the calibration register: %d", ret);
+ return -ENODEV;
+ }
data->client = client;
mutex_init(&data->update_lock);
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index d16dbb3..6753fd9 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -44,6 +44,7 @@
g751,
lm75,
lm75a,
+ lm75b,
max6625,
max6626,
mcp980x,
@@ -233,6 +234,10 @@
data->resolution = 9;
data->sample_time = HZ / 2;
break;
+ case lm75b:
+ data->resolution = 11;
+ data->sample_time = HZ / 4;
+ break;
case max6625:
data->resolution = 9;
data->sample_time = HZ / 4;
@@ -322,6 +327,7 @@
{ "g751", g751, },
{ "lm75", lm75, },
{ "lm75a", lm75a, },
+ { "lm75b", lm75b, },
{ "max6625", max6625, },
{ "max6626", max6626, },
{ "mcp980x", mcp980x, },
@@ -409,6 +415,12 @@
|| i2c_smbus_read_byte_data(new_client, 7) != os)
return -ENODEV;
}
+ /*
+ * It is very unlikely that this is a LM75 if both
+ * hysteresis and temperature limit registers are 0.
+ */
+ if (hyst == 0 && os == 0)
+ return -ENODEV;
/* Addresses cycling */
for (i = 8; i <= 248; i += 40) {
diff --git a/drivers/hwmon/lm95234.c b/drivers/hwmon/lm95234.c
index 411202b..8796de3 100644
--- a/drivers/hwmon/lm95234.c
+++ b/drivers/hwmon/lm95234.c
@@ -1,7 +1,7 @@
/*
* Driver for Texas Instruments / National Semiconductor LM95234
*
- * Copyright (c) 2013 Guenter Roeck <linux@roeck-us.net>
+ * Copyright (c) 2013, 2014 Guenter Roeck <linux@roeck-us.net>
*
* Derived from lm95241.c
* Copyright (C) 2008, 2010 Davide Rizzo <elpa.rizzo@gmail.com>
@@ -30,7 +30,10 @@
#define DRVNAME "lm95234"
-static const unsigned short normal_i2c[] = { 0x18, 0x4d, 0x4e, I2C_CLIENT_END };
+enum chips { lm95233, lm95234 };
+
+static const unsigned short normal_i2c[] = {
+ 0x18, 0x2a, 0x2b, 0x4d, 0x4e, I2C_CLIENT_END };
/* LM95234 registers */
#define LM95234_REG_MAN_ID 0xFE
@@ -53,11 +56,13 @@
#define LM95234_REG_TCRIT_HYST 0x5a
#define NATSEMI_MAN_ID 0x01
+#define LM95233_CHIP_ID 0x89
#define LM95234_CHIP_ID 0x79
/* Client data (each client gets its own) */
struct lm95234_data {
struct i2c_client *client;
+ const struct attribute_group *groups[3];
struct mutex update_lock;
unsigned long last_updated, interval; /* in jiffies */
bool valid; /* false until following fields are valid */
@@ -564,35 +569,23 @@
static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval,
set_interval);
-static struct attribute *lm95234_attrs[] = {
+static struct attribute *lm95234_common_attrs[] = {
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp2_input.dev_attr.attr,
&sensor_dev_attr_temp3_input.dev_attr.attr,
- &sensor_dev_attr_temp4_input.dev_attr.attr,
- &sensor_dev_attr_temp5_input.dev_attr.attr,
&sensor_dev_attr_temp2_fault.dev_attr.attr,
&sensor_dev_attr_temp3_fault.dev_attr.attr,
- &sensor_dev_attr_temp4_fault.dev_attr.attr,
- &sensor_dev_attr_temp5_fault.dev_attr.attr,
&sensor_dev_attr_temp2_type.dev_attr.attr,
&sensor_dev_attr_temp3_type.dev_attr.attr,
- &sensor_dev_attr_temp4_type.dev_attr.attr,
- &sensor_dev_attr_temp5_type.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp2_max.dev_attr.attr,
&sensor_dev_attr_temp3_max.dev_attr.attr,
- &sensor_dev_attr_temp4_max.dev_attr.attr,
- &sensor_dev_attr_temp5_max.dev_attr.attr,
&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
&sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
&sensor_dev_attr_temp3_max_hyst.dev_attr.attr,
- &sensor_dev_attr_temp4_max_hyst.dev_attr.attr,
- &sensor_dev_attr_temp5_max_hyst.dev_attr.attr,
&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
&sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
- &sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
- &sensor_dev_attr_temp5_max_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_crit.dev_attr.attr,
&sensor_dev_attr_temp3_crit.dev_attr.attr,
&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
@@ -601,18 +594,44 @@
&sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_offset.dev_attr.attr,
&sensor_dev_attr_temp3_offset.dev_attr.attr,
- &sensor_dev_attr_temp4_offset.dev_attr.attr,
- &sensor_dev_attr_temp5_offset.dev_attr.attr,
&dev_attr_update_interval.attr,
NULL
};
-ATTRIBUTE_GROUPS(lm95234);
+
+static const struct attribute_group lm95234_common_group = {
+ .attrs = lm95234_common_attrs,
+};
+
+static struct attribute *lm95234_attrs[] = {
+ &sensor_dev_attr_temp4_input.dev_attr.attr,
+ &sensor_dev_attr_temp5_input.dev_attr.attr,
+ &sensor_dev_attr_temp4_fault.dev_attr.attr,
+ &sensor_dev_attr_temp5_fault.dev_attr.attr,
+ &sensor_dev_attr_temp4_type.dev_attr.attr,
+ &sensor_dev_attr_temp5_type.dev_attr.attr,
+ &sensor_dev_attr_temp4_max.dev_attr.attr,
+ &sensor_dev_attr_temp5_max.dev_attr.attr,
+ &sensor_dev_attr_temp4_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp5_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp5_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp4_offset.dev_attr.attr,
+ &sensor_dev_attr_temp5_offset.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group lm95234_group = {
+ .attrs = lm95234_attrs,
+};
static int lm95234_detect(struct i2c_client *client,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
+ int address = client->addr;
+ u8 config_mask, model_mask;
int mfg_id, chip_id, val;
+ const char *name;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
@@ -622,15 +641,31 @@
return -ENODEV;
chip_id = i2c_smbus_read_byte_data(client, LM95234_REG_CHIP_ID);
- if (chip_id != LM95234_CHIP_ID)
+ switch (chip_id) {
+ case LM95233_CHIP_ID:
+ if (address != 0x18 && address != 0x2a && address != 0x2b)
+ return -ENODEV;
+ config_mask = 0xbf;
+ model_mask = 0xf9;
+ name = "lm95233";
+ break;
+ case LM95234_CHIP_ID:
+ if (address != 0x18 && address != 0x4d && address != 0x4e)
+ return -ENODEV;
+ config_mask = 0xbc;
+ model_mask = 0xe1;
+ name = "lm95234";
+ break;
+ default:
return -ENODEV;
+ }
val = i2c_smbus_read_byte_data(client, LM95234_REG_STATUS);
if (val & 0x30)
return -ENODEV;
val = i2c_smbus_read_byte_data(client, LM95234_REG_CONFIG);
- if (val & 0xbc)
+ if (val & config_mask)
return -ENODEV;
val = i2c_smbus_read_byte_data(client, LM95234_REG_CONVRATE);
@@ -638,14 +673,14 @@
return -ENODEV;
val = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL);
- if (val & 0xe1)
+ if (val & model_mask)
return -ENODEV;
val = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL_STS);
- if (val & 0xe1)
+ if (val & model_mask)
return -ENODEV;
- strlcpy(info->type, "lm95234", I2C_NAME_SIZE);
+ strlcpy(info->type, name, I2C_NAME_SIZE);
return 0;
}
@@ -698,15 +733,19 @@
if (err < 0)
return err;
+ data->groups[0] = &lm95234_common_group;
+ if (id->driver_data == lm95234)
+ data->groups[1] = &lm95234_group;
+
hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
- data,
- lm95234_groups);
+ data, data->groups);
return PTR_ERR_OR_ZERO(hwmon_dev);
}
/* Driver data (common to all clients) */
static const struct i2c_device_id lm95234_id[] = {
- { "lm95234", 0 },
+ { "lm95233", lm95233 },
+ { "lm95234", lm95234 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm95234_id);
@@ -725,5 +764,5 @@
module_i2c_driver(lm95234_driver);
MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
-MODULE_DESCRIPTION("LM95234 sensor driver");
+MODULE_DESCRIPTION("LM95233/LM95234 sensor driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/lm95245.c b/drivers/hwmon/lm95245.c
index 0ae0dfd..e7aef45 100644
--- a/drivers/hwmon/lm95245.c
+++ b/drivers/hwmon/lm95245.c
@@ -1,10 +1,8 @@
/*
* Copyright (C) 2011 Alexander Stein <alexander.stein@systec-electronic.com>
*
- * The LM95245 is a sensor chip made by National Semiconductors.
+ * The LM95245 is a sensor chip made by TI / National Semiconductor.
* It reports up to two temperatures (its own plus an external one).
- * Complete datasheet can be obtained from National's website at:
- * http://www.national.com/ds.cgi/LM/LM95245.pdf
*
* This driver is based on lm95241.c
*
@@ -34,8 +32,6 @@
#include <linux/mutex.h>
#include <linux/sysfs.h>
-#define DEVNAME "lm95245"
-
static const unsigned short normal_i2c[] = {
0x18, 0x19, 0x29, 0x4c, 0x4d, I2C_CLIENT_END };
@@ -98,7 +94,8 @@
#define STATUS1_LOC 0x01
#define MANUFACTURER_ID 0x01
-#define DEFAULT_REVISION 0xB3
+#define LM95235_REVISION 0xB1
+#define LM95245_REVISION 0xB3
static const u8 lm95245_reg_address[] = {
LM95245_REG_R_LOCAL_TEMPH_S,
@@ -427,17 +424,32 @@
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = new_client->adapter;
+ int address = new_client->addr;
+ const char *name;
+ int rev, id;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- if (i2c_smbus_read_byte_data(new_client, LM95245_REG_R_MAN_ID)
- != MANUFACTURER_ID
- || i2c_smbus_read_byte_data(new_client, LM95245_REG_R_CHIP_ID)
- != DEFAULT_REVISION)
+ id = i2c_smbus_read_byte_data(new_client, LM95245_REG_R_MAN_ID);
+ if (id != MANUFACTURER_ID)
return -ENODEV;
- strlcpy(info->type, DEVNAME, I2C_NAME_SIZE);
+ rev = i2c_smbus_read_byte_data(new_client, LM95245_REG_R_CHIP_ID);
+ switch (rev) {
+ case LM95235_REVISION:
+ if (address != 0x18 && address != 0x29 && address != 0x4c)
+ return -ENODEV;
+ name = "lm95235";
+ break;
+ case LM95245_REVISION:
+ name = "lm95245";
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ strlcpy(info->type, name, I2C_NAME_SIZE);
return 0;
}
@@ -484,7 +496,8 @@
/* Driver data (common to all clients) */
static const struct i2c_device_id lm95245_id[] = {
- { DEVNAME, 0 },
+ { "lm95235", 0 },
+ { "lm95245", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm95245_id);
@@ -492,7 +505,7 @@
static struct i2c_driver lm95245_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
- .name = DEVNAME,
+ .name = "lm95245",
},
.probe = lm95245_probe,
.id_table = lm95245_id,
@@ -503,5 +516,5 @@
module_i2c_driver(lm95245_driver);
MODULE_AUTHOR("Alexander Stein <alexander.stein@systec-electronic.com>");
-MODULE_DESCRIPTION("LM95245 sensor driver");
+MODULE_DESCRIPTION("LM95235/LM95245 sensor driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c
index 504cbdd..dc0df57 100644
--- a/drivers/hwmon/nct6775.c
+++ b/drivers/hwmon/nct6775.c
@@ -38,6 +38,7 @@
* nct6776f 9 5 3 6+3 0xc330 0xc1 0x5ca3
* nct6779d 15 5 5 2+6 0xc560 0xc1 0x5ca3
* nct6791d 15 6 6 2+6 0xc800 0xc1 0x5ca3
+ * nct6792d 15 6 6 2+6 0xc910 0xc1 0x5ca3
*
* #temp lists the number of monitored temperature sources (first value) plus
* the number of directly connectable temperature sensors (second value).
@@ -61,7 +62,7 @@
#define USE_ALTERNATE
-enum kinds { nct6106, nct6775, nct6776, nct6779, nct6791 };
+enum kinds { nct6106, nct6775, nct6776, nct6779, nct6791, nct6792 };
/* used to set data->name = nct6775_device_names[data->sio_kind] */
static const char * const nct6775_device_names[] = {
@@ -70,6 +71,7 @@
"nct6776",
"nct6779",
"nct6791",
+ "nct6792",
};
static unsigned short force_id;
@@ -100,6 +102,7 @@
#define SIO_NCT6776_ID 0xc330
#define SIO_NCT6779_ID 0xc560
#define SIO_NCT6791_ID 0xc800
+#define SIO_NCT6792_ID 0xc910
#define SIO_ID_MASK 0xFFF0
enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 };
@@ -529,6 +532,12 @@
4, 5, 13, -1, -1, -1, /* temp1..temp6 */
12, 9 }; /* intrusion0, intrusion1 */
+/* NCT6792 specific data */
+
+static const u16 NCT6792_REG_TEMP_MON[] = {
+ 0x73, 0x75, 0x77, 0x79, 0x7b, 0x7d };
+static const u16 NCT6792_REG_BEEP[NUM_REG_BEEP] = {
+ 0xb2, 0xb3, 0xb4, 0xb5, 0xbf };
/* NCT6102D/NCT6106D specific data */
@@ -1043,13 +1052,14 @@
reg == 0x73 || reg == 0x75 || reg == 0x77;
case nct6779:
case nct6791:
+ case nct6792:
return reg == 0x150 || reg == 0x153 || reg == 0x155 ||
((reg & 0xfff0) == 0x4b0 && (reg & 0x000f) < 0x0b) ||
reg == 0x402 ||
reg == 0x63a || reg == 0x63c || reg == 0x63e ||
reg == 0x640 || reg == 0x642 ||
reg == 0x73 || reg == 0x75 || reg == 0x77 || reg == 0x79 ||
- reg == 0x7b;
+ reg == 0x7b || reg == 0x7d;
}
return false;
}
@@ -1063,6 +1073,7 @@
static inline void nct6775_set_bank(struct nct6775_data *data, u16 reg)
{
u8 bank = reg >> 8;
+
if (data->bank != bank) {
outb_p(NCT6775_REG_BANK, data->addr + ADDR_REG_OFFSET);
outb_p(bank, data->addr + DATA_REG_OFFSET);
@@ -1300,6 +1311,7 @@
if (!data->target_speed_tolerance[i] ||
data->pwm_enable[i] == speed_cruise) {
u8 t = fanmodecfg & 0x0f;
+
if (data->REG_TOLERANCE_H) {
t |= (nct6775_read_value(data,
data->REG_TOLERANCE_H[i]) & 0x70) >> 1;
@@ -1391,6 +1403,7 @@
case nct6106:
case nct6779:
case nct6791:
+ case nct6792:
reg = nct6775_read_value(data,
data->REG_CRITICAL_PWM_ENABLE[i]);
if (reg & data->CRITICAL_PWM_ENABLE_MASK)
@@ -1473,6 +1486,7 @@
data->alarms = 0;
for (i = 0; i < NUM_REG_ALARM; i++) {
u8 alarm;
+
if (!data->REG_ALARM[i])
continue;
alarm = nct6775_read_value(data, data->REG_ALARM[i]);
@@ -1482,6 +1496,7 @@
data->beeps = 0;
for (i = 0; i < NUM_REG_BEEP; i++) {
u8 beep;
+
if (!data->REG_BEEP[i])
continue;
beep = nct6775_read_value(data, data->REG_BEEP[i]);
@@ -1504,8 +1519,9 @@
{
struct nct6775_data *data = nct6775_update_device(dev);
struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
- int nr = sattr->nr;
int index = sattr->index;
+ int nr = sattr->nr;
+
return sprintf(buf, "%ld\n", in_from_reg(data->in[nr][index], nr));
}
@@ -1515,10 +1531,12 @@
{
struct nct6775_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
- int nr = sattr->nr;
int index = sattr->index;
+ int nr = sattr->nr;
unsigned long val;
- int err = kstrtoul(buf, 10, &val);
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
if (err < 0)
return err;
mutex_lock(&data->update_lock);
@@ -1535,6 +1553,7 @@
struct nct6775_data *data = nct6775_update_device(dev);
struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
int nr = data->ALARM_BITS[sattr->index];
+
return sprintf(buf, "%u\n",
(unsigned int)((data->alarms >> nr) & 0x01));
}
@@ -1570,6 +1589,7 @@
nr = find_temp_source(data, sattr->index, data->num_temp_alarms);
if (nr >= 0) {
int bit = data->ALARM_BITS[nr + TEMP_ALARM_BASE];
+
alarm = (data->alarms >> bit) & 0x01;
}
return sprintf(buf, "%u\n", alarm);
@@ -1595,8 +1615,9 @@
int nr = data->BEEP_BITS[sattr->index];
int regindex = nr >> 3;
unsigned long val;
+ int err;
- int err = kstrtoul(buf, 10, &val);
+ err = kstrtoul(buf, 10, &val);
if (err < 0)
return err;
if (val > 1)
@@ -1629,6 +1650,7 @@
nr = find_temp_source(data, sattr->index, data->num_temp_beeps);
if (nr >= 0) {
int bit = data->BEEP_BITS[nr + TEMP_ALARM_BASE];
+
beep = (data->beeps >> bit) & 0x01;
}
return sprintf(buf, "%u\n", beep);
@@ -1642,8 +1664,9 @@
struct nct6775_data *data = dev_get_drvdata(dev);
int nr, bit, regindex;
unsigned long val;
+ int err;
- int err = kstrtoul(buf, 10, &val);
+ err = kstrtoul(buf, 10, &val);
if (err < 0)
return err;
if (val > 1)
@@ -1715,6 +1738,7 @@
struct nct6775_data *data = nct6775_update_device(dev);
struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
int nr = sattr->index;
+
return sprintf(buf, "%d\n", data->rpm[nr]);
}
@@ -1724,6 +1748,7 @@
struct nct6775_data *data = nct6775_update_device(dev);
struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
int nr = sattr->index;
+
return sprintf(buf, "%d\n",
data->fan_from_reg_min(data->fan_min[nr],
data->fan_div[nr]));
@@ -1735,6 +1760,7 @@
struct nct6775_data *data = nct6775_update_device(dev);
struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
int nr = sattr->index;
+
return sprintf(buf, "%u\n", div_from_reg(data->fan_div[nr]));
}
@@ -1746,9 +1772,9 @@
struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
int nr = sattr->index;
unsigned long val;
- int err;
unsigned int reg;
u8 new_div;
+ int err;
err = kstrtoul(buf, 10, &val);
if (err < 0)
@@ -1932,6 +1958,7 @@
struct nct6775_data *data = nct6775_update_device(dev);
struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
int nr = sattr->index;
+
return sprintf(buf, "%s\n", data->temp_label[data->temp_src[nr]]);
}
@@ -2008,6 +2035,7 @@
struct nct6775_data *data = nct6775_update_device(dev);
struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
int nr = sattr->index;
+
return sprintf(buf, "%d\n", (int)data->temp_type[nr]);
}
@@ -2790,6 +2818,7 @@
case nct6106:
case nct6779:
case nct6791:
+ case nct6792:
nct6775_write_value(data, data->REG_CRITICAL_PWM[nr],
val);
reg = nct6775_read_value(data,
@@ -2997,6 +3026,7 @@
show_vid(struct device *dev, struct device_attribute *attr, char *buf)
{
struct nct6775_data *data = dev_get_drvdata(dev);
+
return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
}
@@ -3202,7 +3232,7 @@
pwm4pin = false;
pwm5pin = false;
pwm6pin = false;
- } else { /* NCT6779D or NCT6791D */
+ } else { /* NCT6779D, NCT6791D, or NCT6792D */
regval = superio_inb(sioreg, 0x1c);
fan3pin = !(regval & (1 << 5));
@@ -3215,7 +3245,7 @@
fan4min = fan4pin;
- if (data->kind == nct6791) {
+ if (data->kind == nct6791 || data->kind == nct6792) {
regval = superio_inb(sioreg, 0x2d);
fan6pin = (regval & (1 << 1));
pwm6pin = (regval & (1 << 0));
@@ -3588,6 +3618,7 @@
break;
case nct6791:
+ case nct6792:
data->in_num = 15;
data->pwm_num = 6;
data->auto_pwm_num = 4;
@@ -3650,12 +3681,20 @@
data->REG_WEIGHT_TEMP[1] = NCT6791_REG_WEIGHT_TEMP_STEP_TOL;
data->REG_WEIGHT_TEMP[2] = NCT6791_REG_WEIGHT_TEMP_BASE;
data->REG_ALARM = NCT6791_REG_ALARM;
- data->REG_BEEP = NCT6776_REG_BEEP;
+ if (data->kind == nct6791)
+ data->REG_BEEP = NCT6776_REG_BEEP;
+ else
+ data->REG_BEEP = NCT6792_REG_BEEP;
reg_temp = NCT6779_REG_TEMP;
- reg_temp_mon = NCT6779_REG_TEMP_MON;
num_reg_temp = ARRAY_SIZE(NCT6779_REG_TEMP);
- num_reg_temp_mon = ARRAY_SIZE(NCT6779_REG_TEMP_MON);
+ if (data->kind == nct6791) {
+ reg_temp_mon = NCT6779_REG_TEMP_MON;
+ num_reg_temp_mon = ARRAY_SIZE(NCT6779_REG_TEMP_MON);
+ } else {
+ reg_temp_mon = NCT6792_REG_TEMP_MON;
+ num_reg_temp_mon = ARRAY_SIZE(NCT6792_REG_TEMP_MON);
+ }
reg_temp_over = NCT6779_REG_TEMP_OVER;
reg_temp_hyst = NCT6779_REG_TEMP_HYST;
reg_temp_config = NCT6779_REG_TEMP_CONFIG;
@@ -3854,6 +3893,7 @@
case nct6106:
case nct6779:
case nct6791:
+ case nct6792:
break;
}
@@ -3885,6 +3925,7 @@
tmp |= 0x3e;
break;
case nct6791:
+ case nct6792:
tmp |= 0x7e;
break;
}
@@ -3972,7 +4013,7 @@
mutex_lock(&data->update_lock);
data->bank = 0xff; /* Force initial bank selection */
- if (data->kind == nct6791) {
+ if (data->kind == nct6791 || data->kind == nct6792) {
err = superio_enter(data->sioreg);
if (err)
goto abort;
@@ -4052,6 +4093,7 @@
"NCT6776D/F",
"NCT6779D",
"NCT6791D",
+ "NCT6792D",
};
/* nct6775_find() looks for a '627 in the Super-I/O config space */
@@ -4086,6 +4128,9 @@
case SIO_NCT6791_ID:
sio_data->kind = nct6791;
break;
+ case SIO_NCT6792_ID:
+ sio_data->kind = nct6792;
+ break;
default:
if (val != 0xffff)
pr_debug("unsupported chip ID: 0x%04x\n", val);
@@ -4111,7 +4156,7 @@
superio_outb(sioaddr, SIO_REG_ENABLE, val | 0x01);
}
- if (sio_data->kind == nct6791)
+ if (sio_data->kind == nct6791 || sio_data->kind == nct6792)
nct6791_enable_io_mapping(sioaddr);
superio_exit(sioaddr);
@@ -4221,7 +4266,7 @@
}
MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
-MODULE_DESCRIPTION("NCT6106D/NCT6775F/NCT6776F/NCT6779D/NCT6791D driver");
+MODULE_DESCRIPTION("NCT6106D/NCT6775F/NCT6776F/NCT6779D/NCT6791D/NCT6792D driver");
MODULE_LICENSE("GPL");
module_init(sensors_nct6775_init);
diff --git a/drivers/hwmon/nct7802.c b/drivers/hwmon/nct7802.c
new file mode 100644
index 0000000..ec56782
--- /dev/null
+++ b/drivers/hwmon/nct7802.c
@@ -0,0 +1,860 @@
+/*
+ * nct7802 - Driver for Nuvoton NCT7802Y
+ *
+ * Copyright (C) 2014 Guenter Roeck <linux@roeck-us.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define DRVNAME "nct7802"
+
+static const u8 REG_VOLTAGE[5] = { 0x09, 0x0a, 0x0c, 0x0d, 0x0e };
+
+static const u8 REG_VOLTAGE_LIMIT_LSB[2][5] = {
+ { 0x40, 0x00, 0x42, 0x44, 0x46 },
+ { 0x3f, 0x00, 0x41, 0x43, 0x45 },
+};
+
+static const u8 REG_VOLTAGE_LIMIT_MSB[5] = { 0x48, 0x00, 0x47, 0x47, 0x48 };
+
+static const u8 REG_VOLTAGE_LIMIT_MSB_SHIFT[2][5] = {
+ { 0, 0, 4, 0, 4 },
+ { 2, 0, 6, 2, 6 },
+};
+
+#define REG_BANK 0x00
+#define REG_TEMP_LSB 0x05
+#define REG_TEMP_PECI_LSB 0x08
+#define REG_VOLTAGE_LOW 0x0f
+#define REG_FANCOUNT_LOW 0x13
+#define REG_START 0x21
+#define REG_MODE 0x22
+#define REG_PECI_ENABLE 0x23
+#define REG_FAN_ENABLE 0x24
+#define REG_VMON_ENABLE 0x25
+#define REG_VENDOR_ID 0xfd
+#define REG_CHIP_ID 0xfe
+#define REG_VERSION_ID 0xff
+
+/*
+ * Data structures and manipulation thereof
+ */
+
+struct nct7802_data {
+ struct regmap *regmap;
+ struct mutex access_lock; /* for multi-byte read and write operations */
+};
+
+static int nct7802_read_temp(struct nct7802_data *data,
+ u8 reg_temp, u8 reg_temp_low, int *temp)
+{
+ unsigned int t1, t2 = 0;
+ int err;
+
+ *temp = 0;
+
+ mutex_lock(&data->access_lock);
+ err = regmap_read(data->regmap, reg_temp, &t1);
+ if (err < 0)
+ goto abort;
+ t1 <<= 8;
+ if (reg_temp_low) { /* 11 bit data */
+ err = regmap_read(data->regmap, reg_temp_low, &t2);
+ if (err < 0)
+ goto abort;
+ }
+ t1 |= t2 & 0xe0;
+ *temp = (s16)t1 / 32 * 125;
+abort:
+ mutex_unlock(&data->access_lock);
+ return err;
+}
+
+static int nct7802_read_fan(struct nct7802_data *data, u8 reg_fan)
+{
+ unsigned int f1, f2;
+ int ret;
+
+ mutex_lock(&data->access_lock);
+ ret = regmap_read(data->regmap, reg_fan, &f1);
+ if (ret < 0)
+ goto abort;
+ ret = regmap_read(data->regmap, REG_FANCOUNT_LOW, &f2);
+ if (ret < 0)
+ goto abort;
+ ret = (f1 << 5) | (f2 >> 3);
+ /* convert fan count to rpm */
+ if (ret == 0x1fff) /* maximum value, assume fan is stopped */
+ ret = 0;
+ else if (ret)
+ ret = DIV_ROUND_CLOSEST(1350000U, ret);
+abort:
+ mutex_unlock(&data->access_lock);
+ return ret;
+}
+
+static int nct7802_read_fan_min(struct nct7802_data *data, u8 reg_fan_low,
+ u8 reg_fan_high)
+{
+ unsigned int f1, f2;
+ int ret;
+
+ mutex_lock(&data->access_lock);
+ ret = regmap_read(data->regmap, reg_fan_low, &f1);
+ if (ret < 0)
+ goto abort;
+ ret = regmap_read(data->regmap, reg_fan_high, &f2);
+ if (ret < 0)
+ goto abort;
+ ret = f1 | ((f2 & 0xf8) << 5);
+ /* convert fan count to rpm */
+ if (ret == 0x1fff) /* maximum value, assume no limit */
+ ret = 0;
+ else if (ret)
+ ret = DIV_ROUND_CLOSEST(1350000U, ret);
+abort:
+ mutex_unlock(&data->access_lock);
+ return ret;
+}
+
+static int nct7802_write_fan_min(struct nct7802_data *data, u8 reg_fan_low,
+ u8 reg_fan_high, unsigned int limit)
+{
+ int err;
+
+ if (limit)
+ limit = DIV_ROUND_CLOSEST(1350000U, limit);
+ else
+ limit = 0x1fff;
+ limit = clamp_val(limit, 0, 0x1fff);
+
+ mutex_lock(&data->access_lock);
+ err = regmap_write(data->regmap, reg_fan_low, limit & 0xff);
+ if (err < 0)
+ goto abort;
+
+ err = regmap_write(data->regmap, reg_fan_high, (limit & 0x1f00) >> 5);
+abort:
+ mutex_unlock(&data->access_lock);
+ return err;
+}
+
+static u8 nct7802_vmul[] = { 4, 2, 2, 2, 2 };
+
+static int nct7802_read_voltage(struct nct7802_data *data, int nr, int index)
+{
+ unsigned int v1, v2;
+ int ret;
+
+ mutex_lock(&data->access_lock);
+ if (index == 0) { /* voltage */
+ ret = regmap_read(data->regmap, REG_VOLTAGE[nr], &v1);
+ if (ret < 0)
+ goto abort;
+ ret = regmap_read(data->regmap, REG_VOLTAGE_LOW, &v2);
+ if (ret < 0)
+ goto abort;
+ ret = ((v1 << 2) | (v2 >> 6)) * nct7802_vmul[nr];
+ } else { /* limit */
+ int shift = 8 - REG_VOLTAGE_LIMIT_MSB_SHIFT[index - 1][nr];
+
+ ret = regmap_read(data->regmap,
+ REG_VOLTAGE_LIMIT_LSB[index - 1][nr], &v1);
+ if (ret < 0)
+ goto abort;
+ ret = regmap_read(data->regmap, REG_VOLTAGE_LIMIT_MSB[nr],
+ &v2);
+ if (ret < 0)
+ goto abort;
+ ret = (v1 | ((v2 << shift) & 0x300)) * nct7802_vmul[nr];
+ }
+abort:
+ mutex_unlock(&data->access_lock);
+ return ret;
+}
+
+static int nct7802_write_voltage(struct nct7802_data *data, int nr, int index,
+ unsigned int voltage)
+{
+ int shift = 8 - REG_VOLTAGE_LIMIT_MSB_SHIFT[index - 1][nr];
+ int err;
+
+ voltage = DIV_ROUND_CLOSEST(voltage, nct7802_vmul[nr]);
+ voltage = clamp_val(voltage, 0, 0x3ff);
+
+ mutex_lock(&data->access_lock);
+ err = regmap_write(data->regmap,
+ REG_VOLTAGE_LIMIT_LSB[index - 1][nr],
+ voltage & 0xff);
+ if (err < 0)
+ goto abort;
+
+ err = regmap_update_bits(data->regmap, REG_VOLTAGE_LIMIT_MSB[nr],
+ 0x0300 >> shift, (voltage & 0x0300) >> shift);
+abort:
+ mutex_unlock(&data->access_lock);
+ return err;
+}
+
+static ssize_t show_in(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ int voltage;
+
+ voltage = nct7802_read_voltage(data, sattr->nr, sattr->index);
+ if (voltage < 0)
+ return voltage;
+
+ return sprintf(buf, "%d\n", voltage);
+}
+
+static ssize_t store_in(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ int index = sattr->index;
+ int nr = sattr->nr;
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
+ err = nct7802_write_voltage(data, nr, index, val);
+ return err ? : count;
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int err, temp;
+
+ err = nct7802_read_temp(data, sattr->nr, sattr->index, &temp);
+ if (err < 0)
+ return err;
+
+ return sprintf(buf, "%d\n", temp);
+}
+
+static ssize_t store_temp(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ int nr = sattr->nr;
+ long val;
+ int err;
+
+ err = kstrtol(buf, 10, &val);
+ if (err < 0)
+ return err;
+
+ val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -128, 127);
+
+ err = regmap_write(data->regmap, nr, val & 0xff);
+ return err ? : count;
+}
+
+static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ int speed;
+
+ speed = nct7802_read_fan(data, sattr->index);
+ if (speed < 0)
+ return speed;
+
+ return sprintf(buf, "%d\n", speed);
+}
+
+static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ int speed;
+
+ speed = nct7802_read_fan_min(data, sattr->nr, sattr->index);
+ if (speed < 0)
+ return speed;
+
+ return sprintf(buf, "%d\n", speed);
+}
+
+static ssize_t store_fan_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
+ err = nct7802_write_fan_min(data, sattr->nr, sattr->index, val);
+ return err ? : count;
+}
+
+static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int bit = sattr->index;
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(data->regmap, sattr->nr, &val);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%u\n", !!(val & (1 << bit)));
+}
+
+static ssize_t
+show_beep(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ unsigned int regval;
+ int err;
+
+ err = regmap_read(data->regmap, sattr->nr, ®val);
+ if (err)
+ return err;
+
+ return sprintf(buf, "%u\n", !!(regval & (1 << sattr->index)));
+}
+
+static ssize_t
+store_beep(struct device *dev, struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+ if (val > 1)
+ return -EINVAL;
+
+ err = regmap_update_bits(data->regmap, sattr->nr, 1 << sattr->index,
+ val ? 1 << sattr->index : 0);
+ return err ? : count;
+}
+
+static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0x01,
+ REG_TEMP_LSB);
+static SENSOR_DEVICE_ATTR_2(temp1_min, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x31, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x30, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x3a, 0);
+
+static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0x02,
+ REG_TEMP_LSB);
+static SENSOR_DEVICE_ATTR_2(temp2_min, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x33, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x32, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x3b, 0);
+
+static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0x03,
+ REG_TEMP_LSB);
+static SENSOR_DEVICE_ATTR_2(temp3_min, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x35, 0);
+static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x34, 0);
+static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x3c, 0);
+
+static SENSOR_DEVICE_ATTR_2(temp4_input, S_IRUGO, show_temp, NULL, 0x04, 0);
+static SENSOR_DEVICE_ATTR_2(temp4_min, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x37, 0);
+static SENSOR_DEVICE_ATTR_2(temp4_max, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x36, 0);
+static SENSOR_DEVICE_ATTR_2(temp4_crit, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x3d, 0);
+
+static SENSOR_DEVICE_ATTR_2(temp5_input, S_IRUGO, show_temp, NULL, 0x06,
+ REG_TEMP_PECI_LSB);
+static SENSOR_DEVICE_ATTR_2(temp5_min, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x39, 0);
+static SENSOR_DEVICE_ATTR_2(temp5_max, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x38, 0);
+static SENSOR_DEVICE_ATTR_2(temp5_crit, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x3e, 0);
+
+static SENSOR_DEVICE_ATTR_2(temp6_input, S_IRUGO, show_temp, NULL, 0x07,
+ REG_TEMP_PECI_LSB);
+
+static SENSOR_DEVICE_ATTR_2(temp1_min_alarm, S_IRUGO, show_alarm, NULL,
+ 0x18, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_min_alarm, S_IRUGO, show_alarm, NULL,
+ 0x18, 1);
+static SENSOR_DEVICE_ATTR_2(temp3_min_alarm, S_IRUGO, show_alarm, NULL,
+ 0x18, 2);
+static SENSOR_DEVICE_ATTR_2(temp4_min_alarm, S_IRUGO, show_alarm, NULL,
+ 0x18, 3);
+static SENSOR_DEVICE_ATTR_2(temp5_min_alarm, S_IRUGO, show_alarm, NULL,
+ 0x18, 4);
+
+static SENSOR_DEVICE_ATTR_2(temp1_max_alarm, S_IRUGO, show_alarm, NULL,
+ 0x19, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_max_alarm, S_IRUGO, show_alarm, NULL,
+ 0x19, 1);
+static SENSOR_DEVICE_ATTR_2(temp3_max_alarm, S_IRUGO, show_alarm, NULL,
+ 0x19, 2);
+static SENSOR_DEVICE_ATTR_2(temp4_max_alarm, S_IRUGO, show_alarm, NULL,
+ 0x19, 3);
+static SENSOR_DEVICE_ATTR_2(temp5_max_alarm, S_IRUGO, show_alarm, NULL,
+ 0x19, 4);
+
+static SENSOR_DEVICE_ATTR_2(temp1_crit_alarm, S_IRUGO, show_alarm, NULL,
+ 0x1b, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_crit_alarm, S_IRUGO, show_alarm, NULL,
+ 0x1b, 1);
+static SENSOR_DEVICE_ATTR_2(temp3_crit_alarm, S_IRUGO, show_alarm, NULL,
+ 0x1b, 2);
+static SENSOR_DEVICE_ATTR_2(temp4_crit_alarm, S_IRUGO, show_alarm, NULL,
+ 0x1b, 3);
+static SENSOR_DEVICE_ATTR_2(temp5_crit_alarm, S_IRUGO, show_alarm, NULL,
+ 0x1b, 4);
+
+static SENSOR_DEVICE_ATTR_2(temp1_fault, S_IRUGO, show_alarm, NULL, 0x17, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_fault, S_IRUGO, show_alarm, NULL, 0x17, 1);
+static SENSOR_DEVICE_ATTR_2(temp3_fault, S_IRUGO, show_alarm, NULL, 0x17, 2);
+
+static SENSOR_DEVICE_ATTR_2(temp1_beep, S_IRUGO | S_IWUSR, show_beep,
+ store_beep, 0x5c, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_beep, S_IRUGO | S_IWUSR, show_beep,
+ store_beep, 0x5c, 1);
+static SENSOR_DEVICE_ATTR_2(temp3_beep, S_IRUGO | S_IWUSR, show_beep,
+ store_beep, 0x5c, 2);
+static SENSOR_DEVICE_ATTR_2(temp4_beep, S_IRUGO | S_IWUSR, show_beep,
+ store_beep, 0x5c, 3);
+static SENSOR_DEVICE_ATTR_2(temp5_beep, S_IRUGO | S_IWUSR, show_beep,
+ store_beep, 0x5c, 4);
+static SENSOR_DEVICE_ATTR_2(temp6_beep, S_IRUGO | S_IWUSR, show_beep,
+ store_beep, 0x5c, 5);
+
+static struct attribute *nct7802_temp_attrs[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit.dev_attr.attr,
+ &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_fault.dev_attr.attr,
+ &sensor_dev_attr_temp1_beep.dev_attr.attr,
+
+ &sensor_dev_attr_temp2_input.dev_attr.attr, /* 9 */
+ &sensor_dev_attr_temp2_min.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit.dev_attr.attr,
+ &sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_fault.dev_attr.attr,
+ &sensor_dev_attr_temp2_beep.dev_attr.attr,
+
+ &sensor_dev_attr_temp3_input.dev_attr.attr, /* 18 */
+ &sensor_dev_attr_temp3_min.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit.dev_attr.attr,
+ &sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_fault.dev_attr.attr,
+ &sensor_dev_attr_temp3_beep.dev_attr.attr,
+
+ &sensor_dev_attr_temp4_input.dev_attr.attr, /* 27 */
+ &sensor_dev_attr_temp4_min.dev_attr.attr,
+ &sensor_dev_attr_temp4_max.dev_attr.attr,
+ &sensor_dev_attr_temp4_crit.dev_attr.attr,
+ &sensor_dev_attr_temp4_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp4_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp4_beep.dev_attr.attr,
+
+ &sensor_dev_attr_temp5_input.dev_attr.attr, /* 35 */
+ &sensor_dev_attr_temp5_min.dev_attr.attr,
+ &sensor_dev_attr_temp5_max.dev_attr.attr,
+ &sensor_dev_attr_temp5_crit.dev_attr.attr,
+ &sensor_dev_attr_temp5_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp5_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp5_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp5_beep.dev_attr.attr,
+
+ &sensor_dev_attr_temp6_input.dev_attr.attr, /* 43 */
+ &sensor_dev_attr_temp6_beep.dev_attr.attr,
+
+ NULL
+};
+
+static umode_t nct7802_temp_is_visible(struct kobject *kobj,
+ struct attribute *attr, int index)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ unsigned int reg;
+ int err;
+
+ err = regmap_read(data->regmap, REG_MODE, ®);
+ if (err < 0)
+ return 0;
+
+ if (index < 9 &&
+ (reg & 03) != 0x01 && (reg & 0x03) != 0x02) /* RD1 */
+ return 0;
+ if (index >= 9 && index < 18 &&
+ (reg & 0x0c) != 0x04 && (reg & 0x0c) != 0x08) /* RD2 */
+ return 0;
+ if (index >= 18 && index < 27 && (reg & 0x30) != 0x10) /* RD3 */
+ return 0;
+ if (index >= 27 && index < 35) /* local */
+ return attr->mode;
+
+ err = regmap_read(data->regmap, REG_PECI_ENABLE, ®);
+ if (err < 0)
+ return 0;
+
+ if (index >= 35 && index < 43 && !(reg & 0x01)) /* PECI 0 */
+ return 0;
+
+ if (index >= 0x43 && (!(reg & 0x02))) /* PECI 1 */
+ return 0;
+
+ return attr->mode;
+}
+
+static struct attribute_group nct7802_temp_group = {
+ .attrs = nct7802_temp_attrs,
+ .is_visible = nct7802_temp_is_visible,
+};
+
+static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0);
+static SENSOR_DEVICE_ATTR_2(in0_min, S_IRUGO | S_IWUSR, show_in, store_in,
+ 0, 1);
+static SENSOR_DEVICE_ATTR_2(in0_max, S_IRUGO | S_IWUSR, show_in, store_in,
+ 0, 2);
+static SENSOR_DEVICE_ATTR_2(in0_alarm, S_IRUGO, show_alarm, NULL, 0x1e, 3);
+static SENSOR_DEVICE_ATTR_2(in0_beep, S_IRUGO | S_IWUSR, show_beep, store_beep,
+ 0x5a, 3);
+
+static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 1, 0);
+
+static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 2, 0);
+static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_in, store_in,
+ 2, 1);
+static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_in, store_in,
+ 2, 2);
+static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, show_alarm, NULL, 0x1e, 0);
+static SENSOR_DEVICE_ATTR_2(in2_beep, S_IRUGO | S_IWUSR, show_beep, store_beep,
+ 0x5a, 0);
+
+static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO, show_in, NULL, 3, 0);
+static SENSOR_DEVICE_ATTR_2(in3_min, S_IRUGO | S_IWUSR, show_in, store_in,
+ 3, 1);
+static SENSOR_DEVICE_ATTR_2(in3_max, S_IRUGO | S_IWUSR, show_in, store_in,
+ 3, 2);
+static SENSOR_DEVICE_ATTR_2(in3_alarm, S_IRUGO, show_alarm, NULL, 0x1e, 1);
+static SENSOR_DEVICE_ATTR_2(in3_beep, S_IRUGO | S_IWUSR, show_beep, store_beep,
+ 0x5a, 1);
+
+static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO, show_in, NULL, 4, 0);
+static SENSOR_DEVICE_ATTR_2(in4_min, S_IRUGO | S_IWUSR, show_in, store_in,
+ 4, 1);
+static SENSOR_DEVICE_ATTR_2(in4_max, S_IRUGO | S_IWUSR, show_in, store_in,
+ 4, 2);
+static SENSOR_DEVICE_ATTR_2(in4_alarm, S_IRUGO, show_alarm, NULL, 0x1e, 2);
+static SENSOR_DEVICE_ATTR_2(in4_beep, S_IRUGO | S_IWUSR, show_beep, store_beep,
+ 0x5a, 2);
+
+static struct attribute *nct7802_in_attrs[] = {
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in0_min.dev_attr.attr,
+ &sensor_dev_attr_in0_max.dev_attr.attr,
+ &sensor_dev_attr_in0_alarm.dev_attr.attr,
+ &sensor_dev_attr_in0_beep.dev_attr.attr,
+
+ &sensor_dev_attr_in1_input.dev_attr.attr, /* 5 */
+
+ &sensor_dev_attr_in2_input.dev_attr.attr, /* 6 */
+ &sensor_dev_attr_in2_min.dev_attr.attr,
+ &sensor_dev_attr_in2_max.dev_attr.attr,
+ &sensor_dev_attr_in2_alarm.dev_attr.attr,
+ &sensor_dev_attr_in2_beep.dev_attr.attr,
+
+ &sensor_dev_attr_in3_input.dev_attr.attr, /* 11 */
+ &sensor_dev_attr_in3_min.dev_attr.attr,
+ &sensor_dev_attr_in3_max.dev_attr.attr,
+ &sensor_dev_attr_in3_alarm.dev_attr.attr,
+ &sensor_dev_attr_in3_beep.dev_attr.attr,
+
+ &sensor_dev_attr_in4_input.dev_attr.attr, /* 17 */
+ &sensor_dev_attr_in4_min.dev_attr.attr,
+ &sensor_dev_attr_in4_max.dev_attr.attr,
+ &sensor_dev_attr_in4_alarm.dev_attr.attr,
+ &sensor_dev_attr_in4_beep.dev_attr.attr,
+
+ NULL,
+};
+
+static umode_t nct7802_in_is_visible(struct kobject *kobj,
+ struct attribute *attr, int index)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ unsigned int reg;
+ int err;
+
+ if (index < 6) /* VCC, VCORE */
+ return attr->mode;
+
+ err = regmap_read(data->regmap, REG_MODE, ®);
+ if (err < 0)
+ return 0;
+
+ if (index >= 6 && index < 11 && (reg & 0x03) != 0x03) /* VSEN1 */
+ return 0;
+ if (index >= 11 && index < 17 && (reg & 0x0c) != 0x0c) /* VSEN2 */
+ return 0;
+ if (index >= 17 && (reg & 0x30) != 0x30) /* VSEN3 */
+ return 0;
+
+ return attr->mode;
+}
+
+static struct attribute_group nct7802_in_group = {
+ .attrs = nct7802_in_attrs,
+ .is_visible = nct7802_in_is_visible,
+};
+
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0x10);
+static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO | S_IWUSR, show_fan_min,
+ store_fan_min, 0x49, 0x4c);
+static SENSOR_DEVICE_ATTR_2(fan1_alarm, S_IRUGO, show_alarm, NULL, 0x1a, 0);
+static SENSOR_DEVICE_ATTR_2(fan1_beep, S_IRUGO | S_IWUSR, show_beep, store_beep,
+ 0x5b, 0);
+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 0x11);
+static SENSOR_DEVICE_ATTR_2(fan2_min, S_IRUGO | S_IWUSR, show_fan_min,
+ store_fan_min, 0x4a, 0x4d);
+static SENSOR_DEVICE_ATTR_2(fan2_alarm, S_IRUGO, show_alarm, NULL, 0x1a, 1);
+static SENSOR_DEVICE_ATTR_2(fan2_beep, S_IRUGO | S_IWUSR, show_beep, store_beep,
+ 0x5b, 1);
+static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 0x12);
+static SENSOR_DEVICE_ATTR_2(fan3_min, S_IRUGO | S_IWUSR, show_fan_min,
+ store_fan_min, 0x4b, 0x4e);
+static SENSOR_DEVICE_ATTR_2(fan3_alarm, S_IRUGO, show_alarm, NULL, 0x1a, 2);
+static SENSOR_DEVICE_ATTR_2(fan3_beep, S_IRUGO | S_IWUSR, show_beep, store_beep,
+ 0x5b, 2);
+
+static struct attribute *nct7802_fan_attrs[] = {
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan1_min.dev_attr.attr,
+ &sensor_dev_attr_fan1_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan1_beep.dev_attr.attr,
+ &sensor_dev_attr_fan2_input.dev_attr.attr,
+ &sensor_dev_attr_fan2_min.dev_attr.attr,
+ &sensor_dev_attr_fan2_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan2_beep.dev_attr.attr,
+ &sensor_dev_attr_fan3_input.dev_attr.attr,
+ &sensor_dev_attr_fan3_min.dev_attr.attr,
+ &sensor_dev_attr_fan3_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan3_beep.dev_attr.attr,
+
+ NULL
+};
+
+static umode_t nct7802_fan_is_visible(struct kobject *kobj,
+ struct attribute *attr, int index)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ int fan = index / 4; /* 4 attributes per fan */
+ unsigned int reg;
+ int err;
+
+ err = regmap_read(data->regmap, REG_FAN_ENABLE, ®);
+ if (err < 0 || !(reg & (1 << fan)))
+ return 0;
+
+ return attr->mode;
+}
+
+static struct attribute_group nct7802_fan_group = {
+ .attrs = nct7802_fan_attrs,
+ .is_visible = nct7802_fan_is_visible,
+};
+
+static const struct attribute_group *nct7802_groups[] = {
+ &nct7802_temp_group,
+ &nct7802_in_group,
+ &nct7802_fan_group,
+ NULL
+};
+
+static int nct7802_detect(struct i2c_client *client,
+ struct i2c_board_info *info)
+{
+ int reg;
+
+ /*
+ * Chip identification registers are only available in bank 0,
+ * so only attempt chip detection if bank 0 is selected
+ */
+ reg = i2c_smbus_read_byte_data(client, REG_BANK);
+ if (reg != 0x00)
+ return -ENODEV;
+
+ reg = i2c_smbus_read_byte_data(client, REG_VENDOR_ID);
+ if (reg != 0x50)
+ return -ENODEV;
+
+ reg = i2c_smbus_read_byte_data(client, REG_CHIP_ID);
+ if (reg != 0xc3)
+ return -ENODEV;
+
+ reg = i2c_smbus_read_byte_data(client, REG_VERSION_ID);
+ if (reg < 0 || (reg & 0xf0) != 0x20)
+ return -ENODEV;
+
+ /* Also validate lower bits of voltage and temperature registers */
+ reg = i2c_smbus_read_byte_data(client, REG_TEMP_LSB);
+ if (reg < 0 || (reg & 0x1f))
+ return -ENODEV;
+
+ reg = i2c_smbus_read_byte_data(client, REG_TEMP_PECI_LSB);
+ if (reg < 0 || (reg & 0x3f))
+ return -ENODEV;
+
+ reg = i2c_smbus_read_byte_data(client, REG_VOLTAGE_LOW);
+ if (reg < 0 || (reg & 0x3f))
+ return -ENODEV;
+
+ strlcpy(info->type, "nct7802", I2C_NAME_SIZE);
+ return 0;
+}
+
+static bool nct7802_regmap_is_volatile(struct device *dev, unsigned int reg)
+{
+ return reg != REG_BANK && reg <= 0x20;
+}
+
+static struct regmap_config nct7802_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = nct7802_regmap_is_volatile,
+};
+
+static int nct7802_init_chip(struct nct7802_data *data)
+{
+ int err;
+
+ /* Enable ADC */
+ err = regmap_update_bits(data->regmap, REG_START, 0x01, 0x01);
+ if (err)
+ return err;
+
+ /* Enable local temperature sensor */
+ err = regmap_update_bits(data->regmap, REG_MODE, 0x40, 0x40);
+ if (err)
+ return err;
+
+ /* Enable Vcore and VCC voltage monitoring */
+ return regmap_update_bits(data->regmap, REG_VMON_ENABLE, 0x03, 0x03);
+}
+
+static int nct7802_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct nct7802_data *data;
+ struct device *hwmon_dev;
+ int ret;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (data == NULL)
+ return -ENOMEM;
+
+ data->regmap = devm_regmap_init_i2c(client, &nct7802_regmap_config);
+ if (IS_ERR(data->regmap))
+ return PTR_ERR(data->regmap);
+
+ mutex_init(&data->access_lock);
+
+ ret = nct7802_init_chip(data);
+ if (ret < 0)
+ return ret;
+
+ hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
+ data,
+ nct7802_groups);
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const unsigned short nct7802_address_list[] = {
+ 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END
+};
+
+static const struct i2c_device_id nct7802_idtable[] = {
+ { "nct7802", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, nct7802_idtable);
+
+static struct i2c_driver nct7802_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = DRVNAME,
+ },
+ .detect = nct7802_detect,
+ .probe = nct7802_probe,
+ .id_table = nct7802_idtable,
+ .address_list = nct7802_address_list,
+};
+
+module_i2c_driver(nct7802_driver);
+
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
+MODULE_DESCRIPTION("NCT7802Y Hardware Monitoring Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 6e1e493..a674cd8 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -47,15 +47,22 @@
be called lm25066.
config SENSORS_LTC2978
- tristate "Linear Technologies LTC2974, LTC2978, LTC3880, and LTC3883"
+ tristate "Linear Technologies LTC2978 and compatibles"
default n
help
If you say yes here you get hardware monitoring support for Linear
- Technology LTC2974, LTC2978, LTC3880, and LTC3883.
+ Technology LTC2974, LTC2977, LTC2978, LTC3880, LTC3883, and LTM4676.
This driver can also be built as a module. If so, the module will
be called ltc2978.
+config SENSORS_LTC2978_REGULATOR
+ boolean "Regulator support for LTC2978 and compatibles"
+ depends on SENSORS_LTC2978 && REGULATOR
+ help
+ If you say yes here you get regulator support for Linear
+ Technology LTC2974, LTC2977, LTC2978, LTC3880, LTC3883, and LTM4676.
+
config SENSORS_MAX16064
tristate "Maxim MAX16064"
default n
diff --git a/drivers/hwmon/pmbus/ltc2978.c b/drivers/hwmon/pmbus/ltc2978.c
index e24ed52..0835050 100644
--- a/drivers/hwmon/pmbus/ltc2978.c
+++ b/drivers/hwmon/pmbus/ltc2978.c
@@ -22,6 +22,7 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/i2c.h>
+#include <linux/regulator/driver.h>
#include "pmbus.h"
enum chips { ltc2974, ltc2977, ltc2978, ltc3880, ltc3883, ltm4676 };
@@ -374,6 +375,19 @@
};
MODULE_DEVICE_TABLE(i2c, ltc2978_id);
+#if IS_ENABLED(CONFIG_SENSORS_LTC2978_REGULATOR)
+static const struct regulator_desc ltc2978_reg_desc[] = {
+ PMBUS_REGULATOR("vout", 0),
+ PMBUS_REGULATOR("vout", 1),
+ PMBUS_REGULATOR("vout", 2),
+ PMBUS_REGULATOR("vout", 3),
+ PMBUS_REGULATOR("vout", 4),
+ PMBUS_REGULATOR("vout", 5),
+ PMBUS_REGULATOR("vout", 6),
+ PMBUS_REGULATOR("vout", 7),
+};
+#endif /* CONFIG_SENSORS_LTC2978_REGULATOR */
+
static int ltc2978_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -487,13 +501,36 @@
default:
return -ENODEV;
}
+
+#if IS_ENABLED(CONFIG_SENSORS_LTC2978_REGULATOR)
+ info->num_regulators = info->pages;
+ info->reg_desc = ltc2978_reg_desc;
+ if (info->num_regulators > ARRAY_SIZE(ltc2978_reg_desc)) {
+ dev_err(&client->dev, "num_regulators too large!");
+ info->num_regulators = ARRAY_SIZE(ltc2978_reg_desc);
+ }
+#endif
+
return pmbus_do_probe(client, id, info);
}
-/* This is the driver that will be inserted */
+#ifdef CONFIG_OF
+static const struct of_device_id ltc2978_of_match[] = {
+ { .compatible = "lltc,ltc2974" },
+ { .compatible = "lltc,ltc2977" },
+ { .compatible = "lltc,ltc2978" },
+ { .compatible = "lltc,ltc3880" },
+ { .compatible = "lltc,ltc3883" },
+ { .compatible = "lltc,ltm4676" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ltc2978_of_match);
+#endif
+
static struct i2c_driver ltc2978_driver = {
.driver = {
.name = "ltc2978",
+ .of_match_table = of_match_ptr(ltc2978_of_match),
},
.probe = ltc2978_probe,
.remove = pmbus_do_remove,
diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
index fa9beb3..89a23ff 100644
--- a/drivers/hwmon/pmbus/pmbus.h
+++ b/drivers/hwmon/pmbus/pmbus.h
@@ -19,6 +19,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/regulator/driver.h>
+
#ifndef PMBUS_H
#define PMBUS_H
@@ -186,6 +188,11 @@
#define PMBUS_VIRT_STATUS_VMON (PMBUS_VIRT_BASE + 35)
/*
+ * OPERATION
+ */
+#define PB_OPERATION_CONTROL_ON (1<<7)
+
+/*
* CAPABILITY
*/
#define PB_CAPABILITY_SMBALERT (1<<4)
@@ -365,8 +372,27 @@
*/
int (*identify)(struct i2c_client *client,
struct pmbus_driver_info *info);
+
+ /* Regulator functionality, if supported by this chip driver. */
+ int num_regulators;
+ const struct regulator_desc *reg_desc;
};
+/* Regulator ops */
+
+extern struct regulator_ops pmbus_regulator_ops;
+
+/* Macro for filling in array of struct regulator_desc */
+#define PMBUS_REGULATOR(_name, _id) \
+ [_id] = { \
+ .name = (_name # _id), \
+ .id = (_id), \
+ .of_match = of_match_ptr(_name # _id), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .ops = &pmbus_regulator_ops, \
+ .owner = THIS_MODULE, \
+ }
+
/* Function declarations */
void pmbus_clear_cache(struct i2c_client *client);
@@ -375,6 +401,10 @@
int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, u16 word);
int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg);
int pmbus_write_byte(struct i2c_client *client, int page, u8 value);
+int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg,
+ u8 value);
+int pmbus_update_byte_data(struct i2c_client *client, int page, u8 reg,
+ u8 mask, u8 value);
void pmbus_clear_faults(struct i2c_client *client);
bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg);
bool pmbus_check_word_register(struct i2c_client *client, int page, int reg);
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 291d11f..f2e47c7 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -29,6 +29,8 @@
#include <linux/hwmon-sysfs.h>
#include <linux/jiffies.h>
#include <linux/i2c/pmbus.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
#include "pmbus.h"
/*
@@ -253,6 +255,37 @@
}
EXPORT_SYMBOL_GPL(pmbus_read_byte_data);
+int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg, u8 value)
+{
+ int rv;
+
+ rv = pmbus_set_page(client, page);
+ if (rv < 0)
+ return rv;
+
+ return i2c_smbus_write_byte_data(client, reg, value);
+}
+EXPORT_SYMBOL_GPL(pmbus_write_byte_data);
+
+int pmbus_update_byte_data(struct i2c_client *client, int page, u8 reg,
+ u8 mask, u8 value)
+{
+ unsigned int tmp;
+ int rv;
+
+ rv = pmbus_read_byte_data(client, page, reg);
+ if (rv < 0)
+ return rv;
+
+ tmp = (rv & ~mask) | (value & mask);
+
+ if (tmp != rv)
+ rv = pmbus_write_byte_data(client, page, reg, tmp);
+
+ return rv;
+}
+EXPORT_SYMBOL_GPL(pmbus_update_byte_data);
+
/*
* _pmbus_read_byte_data() is similar to pmbus_read_byte_data(), but checks if
* a device specific mapping function exists and calls it if necessary.
@@ -1727,6 +1760,84 @@
return 0;
}
+#if IS_ENABLED(CONFIG_REGULATOR)
+static int pmbus_regulator_is_enabled(struct regulator_dev *rdev)
+{
+ struct device *dev = rdev_get_dev(rdev);
+ struct i2c_client *client = to_i2c_client(dev->parent);
+ u8 page = rdev_get_id(rdev);
+ int ret;
+
+ ret = pmbus_read_byte_data(client, page, PMBUS_OPERATION);
+ if (ret < 0)
+ return ret;
+
+ return !!(ret & PB_OPERATION_CONTROL_ON);
+}
+
+static int _pmbus_regulator_on_off(struct regulator_dev *rdev, bool enable)
+{
+ struct device *dev = rdev_get_dev(rdev);
+ struct i2c_client *client = to_i2c_client(dev->parent);
+ u8 page = rdev_get_id(rdev);
+
+ return pmbus_update_byte_data(client, page, PMBUS_OPERATION,
+ PB_OPERATION_CONTROL_ON,
+ enable ? PB_OPERATION_CONTROL_ON : 0);
+}
+
+static int pmbus_regulator_enable(struct regulator_dev *rdev)
+{
+ return _pmbus_regulator_on_off(rdev, 1);
+}
+
+static int pmbus_regulator_disable(struct regulator_dev *rdev)
+{
+ return _pmbus_regulator_on_off(rdev, 0);
+}
+
+struct regulator_ops pmbus_regulator_ops = {
+ .enable = pmbus_regulator_enable,
+ .disable = pmbus_regulator_disable,
+ .is_enabled = pmbus_regulator_is_enabled,
+};
+EXPORT_SYMBOL_GPL(pmbus_regulator_ops);
+
+static int pmbus_regulator_register(struct pmbus_data *data)
+{
+ struct device *dev = data->dev;
+ const struct pmbus_driver_info *info = data->info;
+ const struct pmbus_platform_data *pdata = dev_get_platdata(dev);
+ struct regulator_dev *rdev;
+ int i;
+
+ for (i = 0; i < info->num_regulators; i++) {
+ struct regulator_config config = { };
+
+ config.dev = dev;
+ config.driver_data = data;
+
+ if (pdata && pdata->reg_init_data)
+ config.init_data = &pdata->reg_init_data[i];
+
+ rdev = devm_regulator_register(dev, &info->reg_desc[i],
+ &config);
+ if (IS_ERR(rdev)) {
+ dev_err(dev, "Failed to register %s regulator\n",
+ info->reg_desc[i].name);
+ return PTR_ERR(rdev);
+ }
+ }
+
+ return 0;
+}
+#else
+static int pmbus_regulator_register(struct pmbus_data *data)
+{
+ return 0;
+}
+#endif
+
int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id,
struct pmbus_driver_info *info)
{
@@ -1781,8 +1892,15 @@
dev_err(dev, "Failed to register hwmon device\n");
goto out_kfree;
}
+
+ ret = pmbus_regulator_register(data);
+ if (ret)
+ goto out_unregister;
+
return 0;
+out_unregister:
+ hwmon_device_unregister(data->hwmon_dev);
out_kfree:
kfree(data->group.attrs);
return ret;
diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c
index 7fa6e7d..99664eb 100644
--- a/drivers/hwmon/tmp401.c
+++ b/drivers/hwmon/tmp401.c
@@ -44,9 +44,10 @@
#include <linux/sysfs.h>
/* Addresses to scan */
-static const unsigned short normal_i2c[] = { 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x37, 0x48, 0x49, 0x4a, 0x4c, 0x4d,
+ 0x4e, 0x4f, I2C_CLIENT_END };
-enum chips { tmp401, tmp411, tmp431, tmp432 };
+enum chips { tmp401, tmp411, tmp431, tmp432, tmp435 };
/*
* The TMP401 registers, note some registers have different addresses for
@@ -136,6 +137,7 @@
#define TMP411C_DEVICE_ID 0x10
#define TMP431_DEVICE_ID 0x31
#define TMP432_DEVICE_ID 0x32
+#define TMP435_DEVICE_ID 0x35
/*
* Driver data (common to all clients)
@@ -146,6 +148,7 @@
{ "tmp411", tmp411 },
{ "tmp431", tmp431 },
{ "tmp432", tmp432 },
+ { "tmp435", tmp435 },
{ }
};
MODULE_DEVICE_TABLE(i2c, tmp401_id);
@@ -613,10 +616,10 @@
* Begin non sysfs callback code (aka Real code)
*/
-static void tmp401_init_client(struct tmp401_data *data,
- struct i2c_client *client)
+static int tmp401_init_client(struct tmp401_data *data,
+ struct i2c_client *client)
{
- int config, config_orig;
+ int config, config_orig, status = 0;
/* Set the conversion rate to 2 Hz */
i2c_smbus_write_byte_data(client, TMP401_CONVERSION_RATE_WRITE, 5);
@@ -624,16 +627,18 @@
/* Start conversions (disable shutdown if necessary) */
config = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
- if (config < 0) {
- dev_warn(&client->dev, "Initialization failed!\n");
- return;
- }
+ if (config < 0)
+ return config;
config_orig = config;
config &= ~TMP401_CONFIG_SHUTDOWN;
if (config != config_orig)
- i2c_smbus_write_byte_data(client, TMP401_CONFIG_WRITE, config);
+ status = i2c_smbus_write_byte_data(client,
+ TMP401_CONFIG_WRITE,
+ config);
+
+ return status;
}
static int tmp401_detect(struct i2c_client *client,
@@ -675,15 +680,18 @@
kind = tmp411;
break;
case TMP431_DEVICE_ID:
- if (client->addr == 0x4e)
+ if (client->addr != 0x4c && client->addr != 0x4d)
return -ENODEV;
kind = tmp431;
break;
case TMP432_DEVICE_ID:
- if (client->addr == 0x4e)
+ if (client->addr != 0x4c && client->addr != 0x4d)
return -ENODEV;
kind = tmp432;
break;
+ case TMP435_DEVICE_ID:
+ kind = tmp435;
+ break;
default:
return -ENODEV;
}
@@ -705,11 +713,13 @@
static int tmp401_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- const char *names[] = { "TMP401", "TMP411", "TMP431", "TMP432" };
+ static const char * const names[] = {
+ "TMP401", "TMP411", "TMP431", "TMP432", "TMP435"
+ };
struct device *dev = &client->dev;
struct device *hwmon_dev;
struct tmp401_data *data;
- int groups = 0;
+ int groups = 0, status;
data = devm_kzalloc(dev, sizeof(struct tmp401_data), GFP_KERNEL);
if (!data)
@@ -720,7 +730,9 @@
data->kind = id->driver_data;
/* Initialize the TMP401 chip */
- tmp401_init_client(data, client);
+ status = tmp401_init_client(data, client);
+ if (status < 0)
+ return status;
/* Register sysfs hooks */
data->groups[groups++] = &tmp401_group;
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 917c358..b4d135c 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -881,6 +881,16 @@
This driver can also be built as a module. If so, the module
will be called i2c-diolan-u2c.
+config I2C_DLN2
+ tristate "Diolan DLN-2 USB I2C adapter"
+ depends on MFD_DLN2
+ help
+ If you say yes to this option, support will be included for Diolan
+ DLN2, a USB to I2C interface.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-dln2.
+
config I2C_PARPORT
tristate "Parallel port adapter"
depends on PARPORT
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 78d56c5..cdac7f1 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -87,6 +87,7 @@
# External I2C/SMBus adapter drivers
obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o
+obj-$(CONFIG_I2C_DLN2) += i2c-dln2.o
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
obj-$(CONFIG_I2C_ROBOTFUZZ_OSIF) += i2c-robotfuzz-osif.o
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index 63f3f03..c604f4c 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -111,6 +111,8 @@
#define CDNS_I2C_DIVA_MAX 4
#define CDNS_I2C_DIVB_MAX 64
+#define CDNS_I2C_TIMEOUT_MAX 0xFF
+
#define cdns_i2c_readreg(offset) readl_relaxed(id->membase + offset)
#define cdns_i2c_writereg(val, offset) writel_relaxed(val, id->membase + offset)
@@ -852,6 +854,15 @@
goto err_clk_dis;
}
+ /*
+ * Cadence I2C controller has a bug wherein it generates
+ * invalid read transaction after HW timeout in master receiver mode.
+ * HW timeout is not used by this driver and the interrupt is disabled.
+ * But the feature itself cannot be disabled. Hence maximum value
+ * is written to this register to reduce the chances of error.
+ */
+ cdns_i2c_writereg(CDNS_I2C_TIMEOUT_MAX, CDNS_I2C_TIME_OUT_OFFSET);
+
dev_info(&pdev->dev, "%u kHz mmio %08lx irq %d\n",
id->i2c_clk / 1000, (unsigned long)r_mem->start, id->irq);
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index d15b7c9..01f0cd8 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -407,11 +407,9 @@
if (dev->cmd_err & DAVINCI_I2C_STR_NACK) {
if (msg->flags & I2C_M_IGNORE_NAK)
return msg->len;
- if (stop) {
- w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
- w |= DAVINCI_I2C_MDR_STP;
- davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
- }
+ w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
+ w |= DAVINCI_I2C_MDR_STP;
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
return -EREMOTEIO;
}
return -EIO;
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index edca99d..23628b7 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -359,7 +359,7 @@
}
/* Configure Tx/Rx FIFO threshold levels */
- dw_writel(dev, dev->tx_fifo_depth - 1, DW_IC_TX_TL);
+ dw_writel(dev, dev->tx_fifo_depth / 2, DW_IC_TX_TL);
dw_writel(dev, 0, DW_IC_RX_TL);
/* configure the i2c master */
diff --git a/drivers/i2c/busses/i2c-dln2.c b/drivers/i2c/busses/i2c-dln2.c
new file mode 100644
index 0000000..b3fb86a
--- /dev/null
+++ b/drivers/i2c/busses/i2c-dln2.c
@@ -0,0 +1,262 @@
+/*
+ * Driver for the Diolan DLN-2 USB-I2C adapter
+ *
+ * Copyright (c) 2014 Intel Corporation
+ *
+ * Derived from:
+ * i2c-diolan-u2c.c
+ * Copyright (c) 2010-2011 Ericsson AB
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/dln2.h>
+
+#define DLN2_I2C_MODULE_ID 0x03
+#define DLN2_I2C_CMD(cmd) DLN2_CMD(cmd, DLN2_I2C_MODULE_ID)
+
+/* I2C commands */
+#define DLN2_I2C_GET_PORT_COUNT DLN2_I2C_CMD(0x00)
+#define DLN2_I2C_ENABLE DLN2_I2C_CMD(0x01)
+#define DLN2_I2C_DISABLE DLN2_I2C_CMD(0x02)
+#define DLN2_I2C_IS_ENABLED DLN2_I2C_CMD(0x03)
+#define DLN2_I2C_WRITE DLN2_I2C_CMD(0x06)
+#define DLN2_I2C_READ DLN2_I2C_CMD(0x07)
+#define DLN2_I2C_SCAN_DEVICES DLN2_I2C_CMD(0x08)
+#define DLN2_I2C_PULLUP_ENABLE DLN2_I2C_CMD(0x09)
+#define DLN2_I2C_PULLUP_DISABLE DLN2_I2C_CMD(0x0A)
+#define DLN2_I2C_PULLUP_IS_ENABLED DLN2_I2C_CMD(0x0B)
+#define DLN2_I2C_TRANSFER DLN2_I2C_CMD(0x0C)
+#define DLN2_I2C_SET_MAX_REPLY_COUNT DLN2_I2C_CMD(0x0D)
+#define DLN2_I2C_GET_MAX_REPLY_COUNT DLN2_I2C_CMD(0x0E)
+
+#define DLN2_I2C_MAX_XFER_SIZE 256
+#define DLN2_I2C_BUF_SIZE (DLN2_I2C_MAX_XFER_SIZE + 16)
+
+struct dln2_i2c {
+ struct platform_device *pdev;
+ struct i2c_adapter adapter;
+ u8 port;
+ /*
+ * Buffer to hold the packet for read or write transfers. One is enough
+ * since we can't have multiple transfers in parallel on the i2c bus.
+ */
+ void *buf;
+};
+
+static int dln2_i2c_enable(struct dln2_i2c *dln2, bool enable)
+{
+ u16 cmd;
+ struct {
+ u8 port;
+ } tx;
+
+ tx.port = dln2->port;
+
+ if (enable)
+ cmd = DLN2_I2C_ENABLE;
+ else
+ cmd = DLN2_I2C_DISABLE;
+
+ return dln2_transfer_tx(dln2->pdev, cmd, &tx, sizeof(tx));
+}
+
+static int dln2_i2c_write(struct dln2_i2c *dln2, u8 addr,
+ u8 *data, u16 data_len)
+{
+ int ret;
+ struct {
+ u8 port;
+ u8 addr;
+ u8 mem_addr_len;
+ __le32 mem_addr;
+ __le16 buf_len;
+ u8 buf[DLN2_I2C_MAX_XFER_SIZE];
+ } __packed *tx = dln2->buf;
+ unsigned len;
+
+ BUILD_BUG_ON(sizeof(*tx) > DLN2_I2C_BUF_SIZE);
+
+ tx->port = dln2->port;
+ tx->addr = addr;
+ tx->mem_addr_len = 0;
+ tx->mem_addr = 0;
+ tx->buf_len = cpu_to_le16(data_len);
+ memcpy(tx->buf, data, data_len);
+
+ len = sizeof(*tx) + data_len - DLN2_I2C_MAX_XFER_SIZE;
+ ret = dln2_transfer_tx(dln2->pdev, DLN2_I2C_WRITE, tx, len);
+ if (ret < 0)
+ return ret;
+
+ return data_len;
+}
+
+static int dln2_i2c_read(struct dln2_i2c *dln2, u16 addr, u8 *data,
+ u16 data_len)
+{
+ int ret;
+ struct {
+ u8 port;
+ u8 addr;
+ u8 mem_addr_len;
+ __le32 mem_addr;
+ __le16 buf_len;
+ } __packed tx;
+ struct {
+ __le16 buf_len;
+ u8 buf[DLN2_I2C_MAX_XFER_SIZE];
+ } __packed *rx = dln2->buf;
+ unsigned rx_len = sizeof(*rx);
+
+ BUILD_BUG_ON(sizeof(*rx) > DLN2_I2C_BUF_SIZE);
+
+ tx.port = dln2->port;
+ tx.addr = addr;
+ tx.mem_addr_len = 0;
+ tx.mem_addr = 0;
+ tx.buf_len = cpu_to_le16(data_len);
+
+ ret = dln2_transfer(dln2->pdev, DLN2_I2C_READ, &tx, sizeof(tx),
+ rx, &rx_len);
+ if (ret < 0)
+ return ret;
+ if (rx_len < sizeof(rx->buf_len) + data_len)
+ return -EPROTO;
+ if (le16_to_cpu(rx->buf_len) != data_len)
+ return -EPROTO;
+
+ memcpy(data, rx->buf, data_len);
+
+ return data_len;
+}
+
+static int dln2_i2c_xfer(struct i2c_adapter *adapter,
+ struct i2c_msg *msgs, int num)
+{
+ struct dln2_i2c *dln2 = i2c_get_adapdata(adapter);
+ struct i2c_msg *pmsg;
+ struct device *dev = &dln2->adapter.dev;
+ int i;
+
+ for (i = 0; i < num; i++) {
+ int ret;
+
+ pmsg = &msgs[i];
+
+ if (pmsg->len > DLN2_I2C_MAX_XFER_SIZE) {
+ dev_warn(dev, "maximum transfer size exceeded\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (pmsg->flags & I2C_M_RD) {
+ ret = dln2_i2c_read(dln2, pmsg->addr, pmsg->buf,
+ pmsg->len);
+ if (ret < 0)
+ return ret;
+
+ pmsg->len = ret;
+ } else {
+ ret = dln2_i2c_write(dln2, pmsg->addr, pmsg->buf,
+ pmsg->len);
+ if (ret != pmsg->len)
+ return -EPROTO;
+ }
+ }
+
+ return num;
+}
+
+static u32 dln2_i2c_func(struct i2c_adapter *a)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+ I2C_FUNC_SMBUS_I2C_BLOCK;
+}
+
+static const struct i2c_algorithm dln2_i2c_usb_algorithm = {
+ .master_xfer = dln2_i2c_xfer,
+ .functionality = dln2_i2c_func,
+};
+
+static int dln2_i2c_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct dln2_i2c *dln2;
+ struct device *dev = &pdev->dev;
+ struct dln2_platform_data *pdata = dev_get_platdata(&pdev->dev);
+
+ dln2 = devm_kzalloc(dev, sizeof(*dln2), GFP_KERNEL);
+ if (!dln2)
+ return -ENOMEM;
+
+ dln2->buf = devm_kmalloc(dev, DLN2_I2C_BUF_SIZE, GFP_KERNEL);
+ if (!dln2->buf)
+ return -ENOMEM;
+
+ dln2->pdev = pdev;
+ dln2->port = pdata->port;
+
+ /* setup i2c adapter description */
+ dln2->adapter.owner = THIS_MODULE;
+ dln2->adapter.class = I2C_CLASS_HWMON;
+ dln2->adapter.algo = &dln2_i2c_usb_algorithm;
+ dln2->adapter.dev.parent = dev;
+ i2c_set_adapdata(&dln2->adapter, dln2);
+ snprintf(dln2->adapter.name, sizeof(dln2->adapter.name), "%s-%s-%d",
+ "dln2-i2c", dev_name(pdev->dev.parent), dln2->port);
+
+ platform_set_drvdata(pdev, dln2);
+
+ /* initialize the i2c interface */
+ ret = dln2_i2c_enable(dln2, true);
+ if (ret < 0) {
+ dev_err(dev, "failed to initialize adapter: %d\n", ret);
+ return ret;
+ }
+
+ /* and finally attach to i2c layer */
+ ret = i2c_add_adapter(&dln2->adapter);
+ if (ret < 0) {
+ dev_err(dev, "failed to add I2C adapter: %d\n", ret);
+ goto out_disable;
+ }
+
+ return 0;
+
+out_disable:
+ dln2_i2c_enable(dln2, false);
+
+ return ret;
+}
+
+static int dln2_i2c_remove(struct platform_device *pdev)
+{
+ struct dln2_i2c *dln2 = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&dln2->adapter);
+ dln2_i2c_enable(dln2, false);
+
+ return 0;
+}
+
+static struct platform_driver dln2_i2c_driver = {
+ .driver.name = "dln2-i2c",
+ .probe = dln2_i2c_probe,
+ .remove = dln2_i2c_remove,
+};
+
+module_platform_driver(dln2_i2c_driver);
+
+MODULE_AUTHOR("Laurentiu Palcu <laurentiu.palcu@intel.com>");
+MODULE_DESCRIPTION("Driver for the Diolan DLN2 I2C master interface");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:dln2-i2c");
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 26942c1..277a228 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -922,14 +922,12 @@
if (stat & OMAP_I2C_STAT_NACK) {
err |= OMAP_I2C_STAT_NACK;
omap_i2c_ack_stat(dev, OMAP_I2C_STAT_NACK);
- break;
}
if (stat & OMAP_I2C_STAT_AL) {
dev_err(dev->dev, "Arbitration lost\n");
err |= OMAP_I2C_STAT_AL;
omap_i2c_ack_stat(dev, OMAP_I2C_STAT_AL);
- break;
}
/*
@@ -954,11 +952,13 @@
if (dev->fifo_size)
num_bytes = dev->buf_len;
- omap_i2c_receive_data(dev, num_bytes, true);
-
- if (dev->errata & I2C_OMAP_ERRATA_I207)
+ if (dev->errata & I2C_OMAP_ERRATA_I207) {
i2c_omap_errata_i207(dev, stat);
+ num_bytes = (omap_i2c_read_reg(dev,
+ OMAP_I2C_BUFSTAT_REG) >> 8) & 0x3F;
+ }
+ omap_i2c_receive_data(dev, num_bytes, true);
omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RDR);
continue;
}
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 88bdc8f..bc4e787 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -127,6 +127,14 @@
help
Say yes here to build support for Atmel AT91 ADC.
+config AXP288_ADC
+ tristate "X-Powers AXP288 ADC driver"
+ depends on MFD_AXP20X
+ help
+ Say yes here to have support for X-Powers power management IC (PMIC) ADC
+ device. Depending on platform configuration, this general purpose ADC can
+ be used for sampling sensors such as thermal resistors.
+
config EXYNOS_ADC
tristate "Exynos ADC driver support"
depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || (OF && COMPILE_TEST)
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index cb88a6a..f30093f 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -14,6 +14,7 @@
obj-$(CONFIG_AD7887) += ad7887.o
obj-$(CONFIG_AD799X) += ad799x.o
obj-$(CONFIG_AT91_ADC) += at91_adc.o
+obj-$(CONFIG_AXP288_ADC) += axp288_adc.o
obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o
obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
obj-$(CONFIG_MAX1027) += max1027.o
diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c
new file mode 100644
index 0000000..08bcfb0
--- /dev/null
+++ b/drivers/iio/adc/axp288_adc.c
@@ -0,0 +1,261 @@
+/*
+ * axp288_adc.c - X-Powers AXP288 PMIC ADC Driver
+ *
+ * Copyright (C) 2014 Intel Corporation
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/platform_device.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/machine.h>
+#include <linux/iio/driver.h>
+
+#define AXP288_ADC_EN_MASK 0xF1
+#define AXP288_ADC_TS_PIN_GPADC 0xF2
+#define AXP288_ADC_TS_PIN_ON 0xF3
+
+enum axp288_adc_id {
+ AXP288_ADC_TS,
+ AXP288_ADC_PMIC,
+ AXP288_ADC_GP,
+ AXP288_ADC_BATT_CHRG_I,
+ AXP288_ADC_BATT_DISCHRG_I,
+ AXP288_ADC_BATT_V,
+ AXP288_ADC_NR_CHAN,
+};
+
+struct axp288_adc_info {
+ int irq;
+ struct regmap *regmap;
+};
+
+static const struct iio_chan_spec const axp288_adc_channels[] = {
+ {
+ .indexed = 1,
+ .type = IIO_TEMP,
+ .channel = 0,
+ .address = AXP288_TS_ADC_H,
+ .datasheet_name = "TS_PIN",
+ }, {
+ .indexed = 1,
+ .type = IIO_TEMP,
+ .channel = 1,
+ .address = AXP288_PMIC_ADC_H,
+ .datasheet_name = "PMIC_TEMP",
+ }, {
+ .indexed = 1,
+ .type = IIO_TEMP,
+ .channel = 2,
+ .address = AXP288_GP_ADC_H,
+ .datasheet_name = "GPADC",
+ }, {
+ .indexed = 1,
+ .type = IIO_CURRENT,
+ .channel = 3,
+ .address = AXP20X_BATT_CHRG_I_H,
+ .datasheet_name = "BATT_CHG_I",
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ }, {
+ .indexed = 1,
+ .type = IIO_CURRENT,
+ .channel = 4,
+ .address = AXP20X_BATT_DISCHRG_I_H,
+ .datasheet_name = "BATT_DISCHRG_I",
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ }, {
+ .indexed = 1,
+ .type = IIO_VOLTAGE,
+ .channel = 5,
+ .address = AXP20X_BATT_V_H,
+ .datasheet_name = "BATT_V",
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ },
+};
+
+#define AXP288_ADC_MAP(_adc_channel_label, _consumer_dev_name, \
+ _consumer_channel) \
+ { \
+ .adc_channel_label = _adc_channel_label, \
+ .consumer_dev_name = _consumer_dev_name, \
+ .consumer_channel = _consumer_channel, \
+ }
+
+/* for consumer drivers */
+static struct iio_map axp288_adc_default_maps[] = {
+ AXP288_ADC_MAP("TS_PIN", "axp288-batt", "axp288-batt-temp"),
+ AXP288_ADC_MAP("PMIC_TEMP", "axp288-pmic", "axp288-pmic-temp"),
+ AXP288_ADC_MAP("GPADC", "axp288-gpadc", "axp288-system-temp"),
+ AXP288_ADC_MAP("BATT_CHG_I", "axp288-chrg", "axp288-chrg-curr"),
+ AXP288_ADC_MAP("BATT_DISCHRG_I", "axp288-chrg", "axp288-chrg-d-curr"),
+ AXP288_ADC_MAP("BATT_V", "axp288-batt", "axp288-batt-volt"),
+ {},
+};
+
+static int axp288_adc_read_channel(int *val, unsigned long address,
+ struct regmap *regmap)
+{
+ u8 buf[2];
+
+ if (regmap_bulk_read(regmap, address, buf, 2))
+ return -EIO;
+ *val = (buf[0] << 4) + ((buf[1] >> 4) & 0x0F);
+
+ return IIO_VAL_INT;
+}
+
+static int axp288_adc_set_ts(struct regmap *regmap, unsigned int mode,
+ unsigned long address)
+{
+ /* channels other than GPADC do not need to switch TS pin */
+ if (address != AXP288_GP_ADC_H)
+ return 0;
+
+ return regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, mode);
+}
+
+static int axp288_adc_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ int ret;
+ struct axp288_adc_info *info = iio_priv(indio_dev);
+
+ mutex_lock(&indio_dev->mlock);
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_GPADC,
+ chan->address)) {
+ dev_err(&indio_dev->dev, "GPADC mode\n");
+ ret = -EINVAL;
+ break;
+ }
+ ret = axp288_adc_read_channel(val, chan->address, info->regmap);
+ if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_ON,
+ chan->address))
+ dev_err(&indio_dev->dev, "TS pin restore\n");
+ break;
+ case IIO_CHAN_INFO_PROCESSED:
+ ret = axp288_adc_read_channel(val, chan->address, info->regmap);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret;
+}
+
+static int axp288_adc_set_state(struct regmap *regmap)
+{
+ /* ADC should be always enabled for internal FG to function */
+ if (regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, AXP288_ADC_TS_PIN_ON))
+ return -EIO;
+
+ return regmap_write(regmap, AXP20X_ADC_EN1, AXP288_ADC_EN_MASK);
+}
+
+static const struct iio_info axp288_adc_iio_info = {
+ .read_raw = &axp288_adc_read_raw,
+ .driver_module = THIS_MODULE,
+};
+
+static int axp288_adc_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct axp288_adc_info *info;
+ struct iio_dev *indio_dev;
+ struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ info = iio_priv(indio_dev);
+ info->irq = platform_get_irq(pdev, 0);
+ if (info->irq < 0) {
+ dev_err(&pdev->dev, "no irq resource?\n");
+ return info->irq;
+ }
+ platform_set_drvdata(pdev, indio_dev);
+ info->regmap = axp20x->regmap;
+ /*
+ * Set ADC to enabled state at all time, including system suspend.
+ * otherwise internal fuel gauge functionality may be affected.
+ */
+ ret = axp288_adc_set_state(axp20x->regmap);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to enable ADC device\n");
+ return ret;
+ }
+
+ indio_dev->dev.parent = &pdev->dev;
+ indio_dev->name = pdev->name;
+ indio_dev->channels = axp288_adc_channels;
+ indio_dev->num_channels = ARRAY_SIZE(axp288_adc_channels);
+ indio_dev->info = &axp288_adc_iio_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ ret = iio_map_array_register(indio_dev, axp288_adc_default_maps);
+ if (ret < 0)
+ return ret;
+
+ ret = iio_device_register(indio_dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "unable to register iio device\n");
+ goto err_array_unregister;
+ }
+ return 0;
+
+err_array_unregister:
+ iio_map_array_unregister(indio_dev);
+
+ return ret;
+}
+
+static int axp288_adc_remove(struct platform_device *pdev)
+{
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+
+ iio_device_unregister(indio_dev);
+ iio_map_array_unregister(indio_dev);
+
+ return 0;
+}
+
+static struct platform_device_id axp288_adc_id_table[] = {
+ { .name = "axp288_adc" },
+ {},
+};
+
+static struct platform_driver axp288_adc_driver = {
+ .probe = axp288_adc_probe,
+ .remove = axp288_adc_remove,
+ .id_table = axp288_adc_id_table,
+ .driver = {
+ .name = "axp288_adc",
+ },
+};
+
+MODULE_DEVICE_TABLE(platform, axp288_adc_id_table);
+
+module_platform_driver(axp288_adc_driver);
+
+MODULE_AUTHOR("Jacob Pan <jacob.jun.pan@linux.intel.com>");
+MODULE_DESCRIPTION("X-Powers AXP288 ADC Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index bc20348..8afa28e 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -421,7 +421,7 @@
err_free_client:
evdev_detach_client(evdev, client);
- kfree(client);
+ kvfree(client);
return error;
}
diff --git a/drivers/md/dm-bio-prison.c b/drivers/md/dm-bio-prison.c
index f752d12..be06530 100644
--- a/drivers/md/dm-bio-prison.c
+++ b/drivers/md/dm-bio-prison.c
@@ -14,68 +14,38 @@
/*----------------------------------------------------------------*/
-struct bucket {
- spinlock_t lock;
- struct hlist_head cells;
-};
+#define MIN_CELLS 1024
struct dm_bio_prison {
+ spinlock_t lock;
mempool_t *cell_pool;
-
- unsigned nr_buckets;
- unsigned hash_mask;
- struct bucket *buckets;
+ struct rb_root cells;
};
-/*----------------------------------------------------------------*/
-
-static uint32_t calc_nr_buckets(unsigned nr_cells)
-{
- uint32_t n = 128;
-
- nr_cells /= 4;
- nr_cells = min(nr_cells, 8192u);
-
- while (n < nr_cells)
- n <<= 1;
-
- return n;
-}
-
static struct kmem_cache *_cell_cache;
-static void init_bucket(struct bucket *b)
-{
- spin_lock_init(&b->lock);
- INIT_HLIST_HEAD(&b->cells);
-}
+/*----------------------------------------------------------------*/
/*
* @nr_cells should be the number of cells you want in use _concurrently_.
* Don't confuse it with the number of distinct keys.
*/
-struct dm_bio_prison *dm_bio_prison_create(unsigned nr_cells)
+struct dm_bio_prison *dm_bio_prison_create(void)
{
- unsigned i;
- uint32_t nr_buckets = calc_nr_buckets(nr_cells);
- size_t len = sizeof(struct dm_bio_prison) +
- (sizeof(struct bucket) * nr_buckets);
- struct dm_bio_prison *prison = kmalloc(len, GFP_KERNEL);
+ struct dm_bio_prison *prison = kmalloc(sizeof(*prison), GFP_KERNEL);
if (!prison)
return NULL;
- prison->cell_pool = mempool_create_slab_pool(nr_cells, _cell_cache);
+ spin_lock_init(&prison->lock);
+
+ prison->cell_pool = mempool_create_slab_pool(MIN_CELLS, _cell_cache);
if (!prison->cell_pool) {
kfree(prison);
return NULL;
}
- prison->nr_buckets = nr_buckets;
- prison->hash_mask = nr_buckets - 1;
- prison->buckets = (struct bucket *) (prison + 1);
- for (i = 0; i < nr_buckets; i++)
- init_bucket(prison->buckets + i);
+ prison->cells = RB_ROOT;
return prison;
}
@@ -101,68 +71,73 @@
}
EXPORT_SYMBOL_GPL(dm_bio_prison_free_cell);
-static uint32_t hash_key(struct dm_bio_prison *prison, struct dm_cell_key *key)
-{
- const unsigned long BIG_PRIME = 4294967291UL;
- uint64_t hash = key->block * BIG_PRIME;
-
- return (uint32_t) (hash & prison->hash_mask);
-}
-
-static int keys_equal(struct dm_cell_key *lhs, struct dm_cell_key *rhs)
-{
- return (lhs->virtual == rhs->virtual) &&
- (lhs->dev == rhs->dev) &&
- (lhs->block == rhs->block);
-}
-
-static struct bucket *get_bucket(struct dm_bio_prison *prison,
- struct dm_cell_key *key)
-{
- return prison->buckets + hash_key(prison, key);
-}
-
-static struct dm_bio_prison_cell *__search_bucket(struct bucket *b,
- struct dm_cell_key *key)
-{
- struct dm_bio_prison_cell *cell;
-
- hlist_for_each_entry(cell, &b->cells, list)
- if (keys_equal(&cell->key, key))
- return cell;
-
- return NULL;
-}
-
-static void __setup_new_cell(struct bucket *b,
- struct dm_cell_key *key,
+static void __setup_new_cell(struct dm_cell_key *key,
struct bio *holder,
struct dm_bio_prison_cell *cell)
{
- memcpy(&cell->key, key, sizeof(cell->key));
- cell->holder = holder;
- bio_list_init(&cell->bios);
- hlist_add_head(&cell->list, &b->cells);
+ memcpy(&cell->key, key, sizeof(cell->key));
+ cell->holder = holder;
+ bio_list_init(&cell->bios);
}
-static int __bio_detain(struct bucket *b,
+static int cmp_keys(struct dm_cell_key *lhs,
+ struct dm_cell_key *rhs)
+{
+ if (lhs->virtual < rhs->virtual)
+ return -1;
+
+ if (lhs->virtual > rhs->virtual)
+ return 1;
+
+ if (lhs->dev < rhs->dev)
+ return -1;
+
+ if (lhs->dev > rhs->dev)
+ return 1;
+
+ if (lhs->block_end <= rhs->block_begin)
+ return -1;
+
+ if (lhs->block_begin >= rhs->block_end)
+ return 1;
+
+ return 0;
+}
+
+static int __bio_detain(struct dm_bio_prison *prison,
struct dm_cell_key *key,
struct bio *inmate,
struct dm_bio_prison_cell *cell_prealloc,
struct dm_bio_prison_cell **cell_result)
{
- struct dm_bio_prison_cell *cell;
+ int r;
+ struct rb_node **new = &prison->cells.rb_node, *parent = NULL;
- cell = __search_bucket(b, key);
- if (cell) {
- if (inmate)
- bio_list_add(&cell->bios, inmate);
- *cell_result = cell;
- return 1;
+ while (*new) {
+ struct dm_bio_prison_cell *cell =
+ container_of(*new, struct dm_bio_prison_cell, node);
+
+ r = cmp_keys(key, &cell->key);
+
+ parent = *new;
+ if (r < 0)
+ new = &((*new)->rb_left);
+ else if (r > 0)
+ new = &((*new)->rb_right);
+ else {
+ if (inmate)
+ bio_list_add(&cell->bios, inmate);
+ *cell_result = cell;
+ return 1;
+ }
}
- __setup_new_cell(b, key, inmate, cell_prealloc);
+ __setup_new_cell(key, inmate, cell_prealloc);
*cell_result = cell_prealloc;
+
+ rb_link_node(&cell_prealloc->node, parent, new);
+ rb_insert_color(&cell_prealloc->node, &prison->cells);
+
return 0;
}
@@ -174,11 +149,10 @@
{
int r;
unsigned long flags;
- struct bucket *b = get_bucket(prison, key);
- spin_lock_irqsave(&b->lock, flags);
- r = __bio_detain(b, key, inmate, cell_prealloc, cell_result);
- spin_unlock_irqrestore(&b->lock, flags);
+ spin_lock_irqsave(&prison->lock, flags);
+ r = __bio_detain(prison, key, inmate, cell_prealloc, cell_result);
+ spin_unlock_irqrestore(&prison->lock, flags);
return r;
}
@@ -205,10 +179,11 @@
/*
* @inmates must have been initialised prior to this call
*/
-static void __cell_release(struct dm_bio_prison_cell *cell,
+static void __cell_release(struct dm_bio_prison *prison,
+ struct dm_bio_prison_cell *cell,
struct bio_list *inmates)
{
- hlist_del(&cell->list);
+ rb_erase(&cell->node, &prison->cells);
if (inmates) {
if (cell->holder)
@@ -222,21 +197,21 @@
struct bio_list *bios)
{
unsigned long flags;
- struct bucket *b = get_bucket(prison, &cell->key);
- spin_lock_irqsave(&b->lock, flags);
- __cell_release(cell, bios);
- spin_unlock_irqrestore(&b->lock, flags);
+ spin_lock_irqsave(&prison->lock, flags);
+ __cell_release(prison, cell, bios);
+ spin_unlock_irqrestore(&prison->lock, flags);
}
EXPORT_SYMBOL_GPL(dm_cell_release);
/*
* Sometimes we don't want the holder, just the additional bios.
*/
-static void __cell_release_no_holder(struct dm_bio_prison_cell *cell,
+static void __cell_release_no_holder(struct dm_bio_prison *prison,
+ struct dm_bio_prison_cell *cell,
struct bio_list *inmates)
{
- hlist_del(&cell->list);
+ rb_erase(&cell->node, &prison->cells);
bio_list_merge(inmates, &cell->bios);
}
@@ -245,11 +220,10 @@
struct bio_list *inmates)
{
unsigned long flags;
- struct bucket *b = get_bucket(prison, &cell->key);
- spin_lock_irqsave(&b->lock, flags);
- __cell_release_no_holder(cell, inmates);
- spin_unlock_irqrestore(&b->lock, flags);
+ spin_lock_irqsave(&prison->lock, flags);
+ __cell_release_no_holder(prison, cell, inmates);
+ spin_unlock_irqrestore(&prison->lock, flags);
}
EXPORT_SYMBOL_GPL(dm_cell_release_no_holder);
@@ -267,6 +241,20 @@
}
EXPORT_SYMBOL_GPL(dm_cell_error);
+void dm_cell_visit_release(struct dm_bio_prison *prison,
+ void (*visit_fn)(void *, struct dm_bio_prison_cell *),
+ void *context,
+ struct dm_bio_prison_cell *cell)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&prison->lock, flags);
+ visit_fn(context, cell);
+ rb_erase(&cell->node, &prison->cells);
+ spin_unlock_irqrestore(&prison->lock, flags);
+}
+EXPORT_SYMBOL_GPL(dm_cell_visit_release);
+
/*----------------------------------------------------------------*/
#define DEFERRED_SET_SIZE 64
diff --git a/drivers/md/dm-bio-prison.h b/drivers/md/dm-bio-prison.h
index 6805a14..74cf011 100644
--- a/drivers/md/dm-bio-prison.h
+++ b/drivers/md/dm-bio-prison.h
@@ -10,8 +10,8 @@
#include "persistent-data/dm-block-manager.h" /* FIXME: for dm_block_t */
#include "dm-thin-metadata.h" /* FIXME: for dm_thin_id */
-#include <linux/list.h>
#include <linux/bio.h>
+#include <linux/rbtree.h>
/*----------------------------------------------------------------*/
@@ -23,11 +23,14 @@
*/
struct dm_bio_prison;
-/* FIXME: this needs to be more abstract */
+/*
+ * Keys define a range of blocks within either a virtual or physical
+ * device.
+ */
struct dm_cell_key {
int virtual;
dm_thin_id dev;
- dm_block_t block;
+ dm_block_t block_begin, block_end;
};
/*
@@ -35,13 +38,15 @@
* themselves.
*/
struct dm_bio_prison_cell {
- struct hlist_node list;
+ struct list_head user_list; /* for client use */
+ struct rb_node node;
+
struct dm_cell_key key;
struct bio *holder;
struct bio_list bios;
};
-struct dm_bio_prison *dm_bio_prison_create(unsigned nr_cells);
+struct dm_bio_prison *dm_bio_prison_create(void);
void dm_bio_prison_destroy(struct dm_bio_prison *prison);
/*
@@ -57,7 +62,7 @@
struct dm_bio_prison_cell *cell);
/*
- * Creates, or retrieves a cell for the given key.
+ * Creates, or retrieves a cell that overlaps the given key.
*
* Returns 1 if pre-existing cell returned, zero if new cell created using
* @cell_prealloc.
@@ -68,7 +73,8 @@
struct dm_bio_prison_cell **cell_result);
/*
- * An atomic op that combines retrieving a cell, and adding a bio to it.
+ * An atomic op that combines retrieving or creating a cell, and adding a
+ * bio to it.
*
* Returns 1 if the cell was already held, 0 if @inmate is the new holder.
*/
@@ -87,6 +93,14 @@
void dm_cell_error(struct dm_bio_prison *prison,
struct dm_bio_prison_cell *cell, int error);
+/*
+ * Visits the cell and then releases. Guarantees no new inmates are
+ * inserted between the visit and release.
+ */
+void dm_cell_visit_release(struct dm_bio_prison *prison,
+ void (*visit_fn)(void *, struct dm_bio_prison_cell *),
+ void *context, struct dm_bio_prison_cell *cell);
+
/*----------------------------------------------------------------*/
/*
diff --git a/drivers/md/dm-bufio.c b/drivers/md/dm-bufio.c
index afe7971..c33b497 100644
--- a/drivers/md/dm-bufio.c
+++ b/drivers/md/dm-bufio.c
@@ -14,6 +14,7 @@
#include <linux/vmalloc.h>
#include <linux/shrinker.h>
#include <linux/module.h>
+#include <linux/rbtree.h>
#define DM_MSG_PREFIX "bufio"
@@ -34,12 +35,17 @@
/*
* Check buffer ages in this interval (seconds)
*/
-#define DM_BUFIO_WORK_TIMER_SECS 10
+#define DM_BUFIO_WORK_TIMER_SECS 30
/*
* Free buffers when they are older than this (seconds)
*/
-#define DM_BUFIO_DEFAULT_AGE_SECS 60
+#define DM_BUFIO_DEFAULT_AGE_SECS 300
+
+/*
+ * The nr of bytes of cached data to keep around.
+ */
+#define DM_BUFIO_DEFAULT_RETAIN_BYTES (256 * 1024)
/*
* The number of bvec entries that are embedded directly in the buffer.
@@ -48,14 +54,6 @@
#define DM_BUFIO_INLINE_VECS 16
/*
- * Buffer hash
- */
-#define DM_BUFIO_HASH_BITS 20
-#define DM_BUFIO_HASH(block) \
- ((((block) >> DM_BUFIO_HASH_BITS) ^ (block)) & \
- ((1 << DM_BUFIO_HASH_BITS) - 1))
-
-/*
* Don't try to use kmem_cache_alloc for blocks larger than this.
* For explanation, see alloc_buffer_data below.
*/
@@ -106,7 +104,7 @@
unsigned minimum_buffers;
- struct hlist_head *cache_hash;
+ struct rb_root buffer_tree;
wait_queue_head_t free_buffer_wait;
int async_write_error;
@@ -135,7 +133,7 @@
};
struct dm_buffer {
- struct hlist_node hash_list;
+ struct rb_node node;
struct list_head lru_list;
sector_t block;
void *data;
@@ -223,6 +221,7 @@
* Buffers are freed after this timeout
*/
static unsigned dm_bufio_max_age = DM_BUFIO_DEFAULT_AGE_SECS;
+static unsigned dm_bufio_retain_bytes = DM_BUFIO_DEFAULT_RETAIN_BYTES;
static unsigned long dm_bufio_peak_allocated;
static unsigned long dm_bufio_allocated_kmem_cache;
@@ -253,6 +252,53 @@
*/
static DEFINE_MUTEX(dm_bufio_clients_lock);
+/*----------------------------------------------------------------
+ * A red/black tree acts as an index for all the buffers.
+ *--------------------------------------------------------------*/
+static struct dm_buffer *__find(struct dm_bufio_client *c, sector_t block)
+{
+ struct rb_node *n = c->buffer_tree.rb_node;
+ struct dm_buffer *b;
+
+ while (n) {
+ b = container_of(n, struct dm_buffer, node);
+
+ if (b->block == block)
+ return b;
+
+ n = (b->block < block) ? n->rb_left : n->rb_right;
+ }
+
+ return NULL;
+}
+
+static void __insert(struct dm_bufio_client *c, struct dm_buffer *b)
+{
+ struct rb_node **new = &c->buffer_tree.rb_node, *parent = NULL;
+ struct dm_buffer *found;
+
+ while (*new) {
+ found = container_of(*new, struct dm_buffer, node);
+
+ if (found->block == b->block) {
+ BUG_ON(found != b);
+ return;
+ }
+
+ parent = *new;
+ new = (found->block < b->block) ?
+ &((*new)->rb_left) : &((*new)->rb_right);
+ }
+
+ rb_link_node(&b->node, parent, new);
+ rb_insert_color(&b->node, &c->buffer_tree);
+}
+
+static void __remove(struct dm_bufio_client *c, struct dm_buffer *b)
+{
+ rb_erase(&b->node, &c->buffer_tree);
+}
+
/*----------------------------------------------------------------*/
static void adjust_total_allocated(enum data_mode data_mode, long diff)
@@ -434,7 +480,7 @@
b->block = block;
b->list_mode = dirty;
list_add(&b->lru_list, &c->lru[dirty]);
- hlist_add_head(&b->hash_list, &c->cache_hash[DM_BUFIO_HASH(block)]);
+ __insert(b->c, b);
b->last_accessed = jiffies;
}
@@ -448,7 +494,7 @@
BUG_ON(!c->n_buffers[b->list_mode]);
c->n_buffers[b->list_mode]--;
- hlist_del(&b->hash_list);
+ __remove(b->c, b);
list_del(&b->lru_list);
}
@@ -532,6 +578,19 @@
end_io(&b->bio, r);
}
+static void inline_endio(struct bio *bio, int error)
+{
+ bio_end_io_t *end_fn = bio->bi_private;
+
+ /*
+ * Reset the bio to free any attached resources
+ * (e.g. bio integrity profiles).
+ */
+ bio_reset(bio);
+
+ end_fn(bio, error);
+}
+
static void use_inline_bio(struct dm_buffer *b, int rw, sector_t block,
bio_end_io_t *end_io)
{
@@ -543,7 +602,12 @@
b->bio.bi_max_vecs = DM_BUFIO_INLINE_VECS;
b->bio.bi_iter.bi_sector = block << b->c->sectors_per_block_bits;
b->bio.bi_bdev = b->c->bdev;
- b->bio.bi_end_io = end_io;
+ b->bio.bi_end_io = inline_endio;
+ /*
+ * Use of .bi_private isn't a problem here because
+ * the dm_buffer's inline bio is local to bufio.
+ */
+ b->bio.bi_private = end_io;
/*
* We assume that if len >= PAGE_SIZE ptr is page-aligned.
@@ -887,23 +951,6 @@
__write_dirty_buffers_async(c, 1, write_list);
}
-/*
- * Find a buffer in the hash.
- */
-static struct dm_buffer *__find(struct dm_bufio_client *c, sector_t block)
-{
- struct dm_buffer *b;
-
- hlist_for_each_entry(b, &c->cache_hash[DM_BUFIO_HASH(block)],
- hash_list) {
- dm_bufio_cond_resched();
- if (b->block == block)
- return b;
- }
-
- return NULL;
-}
-
/*----------------------------------------------------------------
* Getting a buffer
*--------------------------------------------------------------*/
@@ -1433,45 +1480,52 @@
}
/*
- * Test if the buffer is unused and too old, and commit it.
+ * We may not be able to evict this buffer if IO pending or the client
+ * is still using it. Caller is expected to know buffer is too old.
+ *
* And if GFP_NOFS is used, we must not do any I/O because we hold
* dm_bufio_clients_lock and we would risk deadlock if the I/O gets
* rerouted to different bufio client.
*/
-static int __cleanup_old_buffer(struct dm_buffer *b, gfp_t gfp,
- unsigned long max_jiffies)
+static bool __try_evict_buffer(struct dm_buffer *b, gfp_t gfp)
{
- if (jiffies - b->last_accessed < max_jiffies)
- return 0;
-
if (!(gfp & __GFP_FS)) {
if (test_bit(B_READING, &b->state) ||
test_bit(B_WRITING, &b->state) ||
test_bit(B_DIRTY, &b->state))
- return 0;
+ return false;
}
if (b->hold_count)
- return 0;
+ return false;
__make_buffer_clean(b);
__unlink_buffer(b);
__free_buffer_wake(b);
- return 1;
+ return true;
}
-static long __scan(struct dm_bufio_client *c, unsigned long nr_to_scan,
- gfp_t gfp_mask)
+static unsigned get_retain_buffers(struct dm_bufio_client *c)
+{
+ unsigned retain_bytes = ACCESS_ONCE(dm_bufio_retain_bytes);
+ return retain_bytes / c->block_size;
+}
+
+static unsigned long __scan(struct dm_bufio_client *c, unsigned long nr_to_scan,
+ gfp_t gfp_mask)
{
int l;
struct dm_buffer *b, *tmp;
- long freed = 0;
+ unsigned long freed = 0;
+ unsigned long count = nr_to_scan;
+ unsigned retain_target = get_retain_buffers(c);
for (l = 0; l < LIST_SIZE; l++) {
list_for_each_entry_safe_reverse(b, tmp, &c->lru[l], lru_list) {
- freed += __cleanup_old_buffer(b, gfp_mask, 0);
- if (!--nr_to_scan)
+ if (__try_evict_buffer(b, gfp_mask))
+ freed++;
+ if (!--nr_to_scan || ((count - freed) <= retain_target))
return freed;
dm_bufio_cond_resched();
}
@@ -1533,11 +1587,7 @@
r = -ENOMEM;
goto bad_client;
}
- c->cache_hash = vmalloc(sizeof(struct hlist_head) << DM_BUFIO_HASH_BITS);
- if (!c->cache_hash) {
- r = -ENOMEM;
- goto bad_hash;
- }
+ c->buffer_tree = RB_ROOT;
c->bdev = bdev;
c->block_size = block_size;
@@ -1556,9 +1606,6 @@
c->n_buffers[i] = 0;
}
- for (i = 0; i < 1 << DM_BUFIO_HASH_BITS; i++)
- INIT_HLIST_HEAD(&c->cache_hash[i]);
-
mutex_init(&c->lock);
INIT_LIST_HEAD(&c->reserved_buffers);
c->need_reserved_buffers = reserved_buffers;
@@ -1632,8 +1679,6 @@
}
dm_io_client_destroy(c->dm_io);
bad_dm_io:
- vfree(c->cache_hash);
-bad_hash:
kfree(c);
bad_client:
return ERR_PTR(r);
@@ -1660,9 +1705,7 @@
mutex_unlock(&dm_bufio_clients_lock);
- for (i = 0; i < 1 << DM_BUFIO_HASH_BITS; i++)
- BUG_ON(!hlist_empty(&c->cache_hash[i]));
-
+ BUG_ON(!RB_EMPTY_ROOT(&c->buffer_tree));
BUG_ON(c->need_reserved_buffers);
while (!list_empty(&c->reserved_buffers)) {
@@ -1680,36 +1723,60 @@
BUG_ON(c->n_buffers[i]);
dm_io_client_destroy(c->dm_io);
- vfree(c->cache_hash);
kfree(c);
}
EXPORT_SYMBOL_GPL(dm_bufio_client_destroy);
-static void cleanup_old_buffers(void)
+static unsigned get_max_age_hz(void)
{
- unsigned long max_age = ACCESS_ONCE(dm_bufio_max_age);
- struct dm_bufio_client *c;
+ unsigned max_age = ACCESS_ONCE(dm_bufio_max_age);
- if (max_age > ULONG_MAX / HZ)
- max_age = ULONG_MAX / HZ;
+ if (max_age > UINT_MAX / HZ)
+ max_age = UINT_MAX / HZ;
- mutex_lock(&dm_bufio_clients_lock);
- list_for_each_entry(c, &dm_bufio_all_clients, client_list) {
- if (!dm_bufio_trylock(c))
- continue;
+ return max_age * HZ;
+}
- while (!list_empty(&c->lru[LIST_CLEAN])) {
- struct dm_buffer *b;
- b = list_entry(c->lru[LIST_CLEAN].prev,
- struct dm_buffer, lru_list);
- if (!__cleanup_old_buffer(b, 0, max_age * HZ))
- break;
- dm_bufio_cond_resched();
- }
+static bool older_than(struct dm_buffer *b, unsigned long age_hz)
+{
+ return (jiffies - b->last_accessed) >= age_hz;
+}
- dm_bufio_unlock(c);
+static void __evict_old_buffers(struct dm_bufio_client *c, unsigned long age_hz)
+{
+ struct dm_buffer *b, *tmp;
+ unsigned retain_target = get_retain_buffers(c);
+ unsigned count;
+
+ dm_bufio_lock(c);
+
+ count = c->n_buffers[LIST_CLEAN] + c->n_buffers[LIST_DIRTY];
+ list_for_each_entry_safe_reverse(b, tmp, &c->lru[LIST_CLEAN], lru_list) {
+ if (count <= retain_target)
+ break;
+
+ if (!older_than(b, age_hz))
+ break;
+
+ if (__try_evict_buffer(b, 0))
+ count--;
+
dm_bufio_cond_resched();
}
+
+ dm_bufio_unlock(c);
+}
+
+static void cleanup_old_buffers(void)
+{
+ unsigned long max_age_hz = get_max_age_hz();
+ struct dm_bufio_client *c;
+
+ mutex_lock(&dm_bufio_clients_lock);
+
+ list_for_each_entry(c, &dm_bufio_all_clients, client_list)
+ __evict_old_buffers(c, max_age_hz);
+
mutex_unlock(&dm_bufio_clients_lock);
}
@@ -1834,6 +1901,9 @@
module_param_named(max_age_seconds, dm_bufio_max_age, uint, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(max_age_seconds, "Max age of a buffer in seconds");
+module_param_named(retain_bytes, dm_bufio_retain_bytes, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(retain_bytes, "Try to keep at least this many bytes cached in memory");
+
module_param_named(peak_allocated_bytes, dm_bufio_peak_allocated, ulong, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(peak_allocated_bytes, "Tracks the maximum allocated memory");
diff --git a/drivers/md/dm-cache-block-types.h b/drivers/md/dm-cache-block-types.h
index aac0e2d..bed4ad4 100644
--- a/drivers/md/dm-cache-block-types.h
+++ b/drivers/md/dm-cache-block-types.h
@@ -19,6 +19,7 @@
typedef dm_block_t __bitwise__ dm_oblock_t;
typedef uint32_t __bitwise__ dm_cblock_t;
+typedef dm_block_t __bitwise__ dm_dblock_t;
static inline dm_oblock_t to_oblock(dm_block_t b)
{
@@ -40,4 +41,14 @@
return (__force uint32_t) b;
}
+static inline dm_dblock_t to_dblock(dm_block_t b)
+{
+ return (__force dm_dblock_t) b;
+}
+
+static inline dm_block_t from_dblock(dm_dblock_t b)
+{
+ return (__force dm_block_t) b;
+}
+
#endif /* DM_CACHE_BLOCK_TYPES_H */
diff --git a/drivers/md/dm-cache-metadata.c b/drivers/md/dm-cache-metadata.c
index 0670925..9fc616c 100644
--- a/drivers/md/dm-cache-metadata.c
+++ b/drivers/md/dm-cache-metadata.c
@@ -109,7 +109,7 @@
dm_block_t discard_root;
sector_t discard_block_size;
- dm_oblock_t discard_nr_blocks;
+ dm_dblock_t discard_nr_blocks;
sector_t data_block_size;
dm_cblock_t cache_blocks;
@@ -329,7 +329,7 @@
disk_super->hint_root = cpu_to_le64(cmd->hint_root);
disk_super->discard_root = cpu_to_le64(cmd->discard_root);
disk_super->discard_block_size = cpu_to_le64(cmd->discard_block_size);
- disk_super->discard_nr_blocks = cpu_to_le64(from_oblock(cmd->discard_nr_blocks));
+ disk_super->discard_nr_blocks = cpu_to_le64(from_dblock(cmd->discard_nr_blocks));
disk_super->metadata_block_size = cpu_to_le32(DM_CACHE_METADATA_BLOCK_SIZE);
disk_super->data_block_size = cpu_to_le32(cmd->data_block_size);
disk_super->cache_blocks = cpu_to_le32(0);
@@ -528,7 +528,7 @@
cmd->hint_root = le64_to_cpu(disk_super->hint_root);
cmd->discard_root = le64_to_cpu(disk_super->discard_root);
cmd->discard_block_size = le64_to_cpu(disk_super->discard_block_size);
- cmd->discard_nr_blocks = to_oblock(le64_to_cpu(disk_super->discard_nr_blocks));
+ cmd->discard_nr_blocks = to_dblock(le64_to_cpu(disk_super->discard_nr_blocks));
cmd->data_block_size = le32_to_cpu(disk_super->data_block_size);
cmd->cache_blocks = to_cblock(le32_to_cpu(disk_super->cache_blocks));
strncpy(cmd->policy_name, disk_super->policy_name, sizeof(cmd->policy_name));
@@ -626,7 +626,7 @@
disk_super->hint_root = cpu_to_le64(cmd->hint_root);
disk_super->discard_root = cpu_to_le64(cmd->discard_root);
disk_super->discard_block_size = cpu_to_le64(cmd->discard_block_size);
- disk_super->discard_nr_blocks = cpu_to_le64(from_oblock(cmd->discard_nr_blocks));
+ disk_super->discard_nr_blocks = cpu_to_le64(from_dblock(cmd->discard_nr_blocks));
disk_super->cache_blocks = cpu_to_le32(from_cblock(cmd->cache_blocks));
strncpy(disk_super->policy_name, cmd->policy_name, sizeof(disk_super->policy_name));
disk_super->policy_version[0] = cpu_to_le32(cmd->policy_version[0]);
@@ -797,15 +797,15 @@
int dm_cache_discard_bitset_resize(struct dm_cache_metadata *cmd,
sector_t discard_block_size,
- dm_oblock_t new_nr_entries)
+ dm_dblock_t new_nr_entries)
{
int r;
down_write(&cmd->root_lock);
r = dm_bitset_resize(&cmd->discard_info,
cmd->discard_root,
- from_oblock(cmd->discard_nr_blocks),
- from_oblock(new_nr_entries),
+ from_dblock(cmd->discard_nr_blocks),
+ from_dblock(new_nr_entries),
false, &cmd->discard_root);
if (!r) {
cmd->discard_block_size = discard_block_size;
@@ -818,28 +818,28 @@
return r;
}
-static int __set_discard(struct dm_cache_metadata *cmd, dm_oblock_t b)
+static int __set_discard(struct dm_cache_metadata *cmd, dm_dblock_t b)
{
return dm_bitset_set_bit(&cmd->discard_info, cmd->discard_root,
- from_oblock(b), &cmd->discard_root);
+ from_dblock(b), &cmd->discard_root);
}
-static int __clear_discard(struct dm_cache_metadata *cmd, dm_oblock_t b)
+static int __clear_discard(struct dm_cache_metadata *cmd, dm_dblock_t b)
{
return dm_bitset_clear_bit(&cmd->discard_info, cmd->discard_root,
- from_oblock(b), &cmd->discard_root);
+ from_dblock(b), &cmd->discard_root);
}
-static int __is_discarded(struct dm_cache_metadata *cmd, dm_oblock_t b,
+static int __is_discarded(struct dm_cache_metadata *cmd, dm_dblock_t b,
bool *is_discarded)
{
return dm_bitset_test_bit(&cmd->discard_info, cmd->discard_root,
- from_oblock(b), &cmd->discard_root,
+ from_dblock(b), &cmd->discard_root,
is_discarded);
}
static int __discard(struct dm_cache_metadata *cmd,
- dm_oblock_t dblock, bool discard)
+ dm_dblock_t dblock, bool discard)
{
int r;
@@ -852,7 +852,7 @@
}
int dm_cache_set_discard(struct dm_cache_metadata *cmd,
- dm_oblock_t dblock, bool discard)
+ dm_dblock_t dblock, bool discard)
{
int r;
@@ -870,8 +870,8 @@
dm_block_t b;
bool discard;
- for (b = 0; b < from_oblock(cmd->discard_nr_blocks); b++) {
- dm_oblock_t dblock = to_oblock(b);
+ for (b = 0; b < from_dblock(cmd->discard_nr_blocks); b++) {
+ dm_dblock_t dblock = to_dblock(b);
if (cmd->clean_when_opened) {
r = __is_discarded(cmd, dblock, &discard);
diff --git a/drivers/md/dm-cache-metadata.h b/drivers/md/dm-cache-metadata.h
index 7383c90..4ecc403 100644
--- a/drivers/md/dm-cache-metadata.h
+++ b/drivers/md/dm-cache-metadata.h
@@ -70,14 +70,14 @@
int dm_cache_discard_bitset_resize(struct dm_cache_metadata *cmd,
sector_t discard_block_size,
- dm_oblock_t new_nr_entries);
+ dm_dblock_t new_nr_entries);
typedef int (*load_discard_fn)(void *context, sector_t discard_block_size,
- dm_oblock_t dblock, bool discarded);
+ dm_dblock_t dblock, bool discarded);
int dm_cache_load_discards(struct dm_cache_metadata *cmd,
load_discard_fn fn, void *context);
-int dm_cache_set_discard(struct dm_cache_metadata *cmd, dm_oblock_t dblock, bool discard);
+int dm_cache_set_discard(struct dm_cache_metadata *cmd, dm_dblock_t dblock, bool discard);
int dm_cache_remove_mapping(struct dm_cache_metadata *cmd, dm_cblock_t cblock);
int dm_cache_insert_mapping(struct dm_cache_metadata *cmd, dm_cblock_t cblock, dm_oblock_t oblock);
diff --git a/drivers/md/dm-cache-policy-mq.c b/drivers/md/dm-cache-policy-mq.c
index 0e385e4..13f547a 100644
--- a/drivers/md/dm-cache-policy-mq.c
+++ b/drivers/md/dm-cache-policy-mq.c
@@ -181,26 +181,32 @@
* Gives us the oldest entry of the lowest popoulated level. If the first
* level is emptied then we shift down one level.
*/
-static struct list_head *queue_pop(struct queue *q)
+static struct list_head *queue_peek(struct queue *q)
{
unsigned level;
- struct list_head *r;
for (level = 0; level < NR_QUEUE_LEVELS; level++)
- if (!list_empty(q->qs + level)) {
- r = q->qs[level].next;
- list_del(r);
-
- /* have we just emptied the bottom level? */
- if (level == 0 && list_empty(q->qs))
- queue_shift_down(q);
-
- return r;
- }
+ if (!list_empty(q->qs + level))
+ return q->qs[level].next;
return NULL;
}
+static struct list_head *queue_pop(struct queue *q)
+{
+ struct list_head *r = queue_peek(q);
+
+ if (r) {
+ list_del(r);
+
+ /* have we just emptied the bottom level? */
+ if (list_empty(q->qs))
+ queue_shift_down(q);
+ }
+
+ return r;
+}
+
static struct list_head *list_pop(struct list_head *lh)
{
struct list_head *r = lh->next;
@@ -383,13 +389,6 @@
unsigned generation;
unsigned generation_period; /* in lookups (will probably change) */
- /*
- * Entries in the pre_cache whose hit count passes the promotion
- * threshold move to the cache proper. Working out the correct
- * value for the promotion_threshold is crucial to this policy.
- */
- unsigned promote_threshold;
-
unsigned discard_promote_adjustment;
unsigned read_promote_adjustment;
unsigned write_promote_adjustment;
@@ -406,6 +405,7 @@
#define DEFAULT_DISCARD_PROMOTE_ADJUSTMENT 1
#define DEFAULT_READ_PROMOTE_ADJUSTMENT 4
#define DEFAULT_WRITE_PROMOTE_ADJUSTMENT 8
+#define DISCOURAGE_DEMOTING_DIRTY_THRESHOLD 128
/*----------------------------------------------------------------*/
@@ -518,6 +518,12 @@
return e;
}
+static struct entry *peek(struct queue *q)
+{
+ struct list_head *h = queue_peek(q);
+ return h ? container_of(h, struct entry, list) : NULL;
+}
+
/*
* Has this entry already been updated?
*/
@@ -570,10 +576,6 @@
break;
}
}
-
- mq->promote_threshold = nr ? total / nr : 1;
- if (mq->promote_threshold * nr < total)
- mq->promote_threshold++;
}
}
@@ -641,6 +643,30 @@
}
/*
+ * Entries in the pre_cache whose hit count passes the promotion
+ * threshold move to the cache proper. Working out the correct
+ * value for the promotion_threshold is crucial to this policy.
+ */
+static unsigned promote_threshold(struct mq_policy *mq)
+{
+ struct entry *e;
+
+ if (any_free_cblocks(mq))
+ return 0;
+
+ e = peek(&mq->cache_clean);
+ if (e)
+ return e->hit_count;
+
+ e = peek(&mq->cache_dirty);
+ if (e)
+ return e->hit_count + DISCOURAGE_DEMOTING_DIRTY_THRESHOLD;
+
+ /* This should never happen */
+ return 0;
+}
+
+/*
* We modify the basic promotion_threshold depending on the specific io.
*
* If the origin block has been discarded then there's no cost to copy it
@@ -653,7 +679,7 @@
bool discarded_oblock, int data_dir)
{
if (data_dir == READ)
- return mq->promote_threshold + mq->read_promote_adjustment;
+ return promote_threshold(mq) + mq->read_promote_adjustment;
if (discarded_oblock && (any_free_cblocks(mq) || any_clean_cblocks(mq))) {
/*
@@ -663,7 +689,7 @@
return mq->discard_promote_adjustment;
}
- return mq->promote_threshold + mq->write_promote_adjustment;
+ return promote_threshold(mq) + mq->write_promote_adjustment;
}
static bool should_promote(struct mq_policy *mq, struct entry *e,
@@ -839,7 +865,8 @@
if (e && in_cache(mq, e))
r = cache_entry_found(mq, e, result);
- else if (iot_pattern(&mq->tracker) == PATTERN_SEQUENTIAL)
+ else if (mq->tracker.thresholds[PATTERN_SEQUENTIAL] &&
+ iot_pattern(&mq->tracker) == PATTERN_SEQUENTIAL)
result->op = POLICY_MISS;
else if (e)
@@ -1230,7 +1257,6 @@
mq->tick = 0;
mq->hit_count = 0;
mq->generation = 0;
- mq->promote_threshold = 0;
mq->discard_promote_adjustment = DEFAULT_DISCARD_PROMOTE_ADJUSTMENT;
mq->read_promote_adjustment = DEFAULT_READ_PROMOTE_ADJUSTMENT;
mq->write_promote_adjustment = DEFAULT_WRITE_PROMOTE_ADJUSTMENT;
@@ -1265,7 +1291,7 @@
static struct dm_cache_policy_type mq_policy_type = {
.name = "mq",
- .version = {1, 2, 0},
+ .version = {1, 3, 0},
.hint_size = 4,
.owner = THIS_MODULE,
.create = mq_create
@@ -1273,7 +1299,7 @@
static struct dm_cache_policy_type default_policy_type = {
.name = "default",
- .version = {1, 2, 0},
+ .version = {1, 3, 0},
.hint_size = 4,
.owner = THIS_MODULE,
.create = mq_create,
diff --git a/drivers/md/dm-cache-target.c b/drivers/md/dm-cache-target.c
index 7130505..1e96d78 100644
--- a/drivers/md/dm-cache-target.c
+++ b/drivers/md/dm-cache-target.c
@@ -95,7 +95,6 @@
/*----------------------------------------------------------------*/
-#define PRISON_CELLS 1024
#define MIGRATION_POOL_SIZE 128
#define COMMIT_PERIOD HZ
#define MIGRATION_COUNT_WINDOW 10
@@ -237,8 +236,9 @@
/*
* origin_blocks entries, discarded if set.
*/
- dm_oblock_t discard_nr_blocks;
+ dm_dblock_t discard_nr_blocks;
unsigned long *discard_bitset;
+ uint32_t discard_block_size; /* a power of 2 times sectors per block */
/*
* Rather than reconstructing the table line for the status we just
@@ -310,6 +310,7 @@
dm_cblock_t cblock;
bool err:1;
+ bool discard:1;
bool writeback:1;
bool demote:1;
bool promote:1;
@@ -433,11 +434,12 @@
/*----------------------------------------------------------------*/
-static void build_key(dm_oblock_t oblock, struct dm_cell_key *key)
+static void build_key(dm_oblock_t begin, dm_oblock_t end, struct dm_cell_key *key)
{
key->virtual = 0;
key->dev = 0;
- key->block = from_oblock(oblock);
+ key->block_begin = from_oblock(begin);
+ key->block_end = from_oblock(end);
}
/*
@@ -447,15 +449,15 @@
*/
typedef void (*cell_free_fn)(void *context, struct dm_bio_prison_cell *cell);
-static int bio_detain(struct cache *cache, dm_oblock_t oblock,
- struct bio *bio, struct dm_bio_prison_cell *cell_prealloc,
- cell_free_fn free_fn, void *free_context,
- struct dm_bio_prison_cell **cell_result)
+static int bio_detain_range(struct cache *cache, dm_oblock_t oblock_begin, dm_oblock_t oblock_end,
+ struct bio *bio, struct dm_bio_prison_cell *cell_prealloc,
+ cell_free_fn free_fn, void *free_context,
+ struct dm_bio_prison_cell **cell_result)
{
int r;
struct dm_cell_key key;
- build_key(oblock, &key);
+ build_key(oblock_begin, oblock_end, &key);
r = dm_bio_detain(cache->prison, &key, bio, cell_prealloc, cell_result);
if (r)
free_fn(free_context, cell_prealloc);
@@ -463,6 +465,16 @@
return r;
}
+static int bio_detain(struct cache *cache, dm_oblock_t oblock,
+ struct bio *bio, struct dm_bio_prison_cell *cell_prealloc,
+ cell_free_fn free_fn, void *free_context,
+ struct dm_bio_prison_cell **cell_result)
+{
+ dm_oblock_t end = to_oblock(from_oblock(oblock) + 1ULL);
+ return bio_detain_range(cache, oblock, end, bio,
+ cell_prealloc, free_fn, free_context, cell_result);
+}
+
static int get_cell(struct cache *cache,
dm_oblock_t oblock,
struct prealloc *structs,
@@ -474,7 +486,7 @@
cell_prealloc = prealloc_get_cell(structs);
- build_key(oblock, &key);
+ build_key(oblock, to_oblock(from_oblock(oblock) + 1ULL), &key);
r = dm_get_cell(cache->prison, &key, cell_prealloc, cell_result);
if (r)
prealloc_put_cell(structs, cell_prealloc);
@@ -524,33 +536,57 @@
return b;
}
-static void set_discard(struct cache *cache, dm_oblock_t b)
+static dm_block_t oblocks_per_dblock(struct cache *cache)
+{
+ dm_block_t oblocks = cache->discard_block_size;
+
+ if (block_size_is_power_of_two(cache))
+ oblocks >>= cache->sectors_per_block_shift;
+ else
+ oblocks = block_div(oblocks, cache->sectors_per_block);
+
+ return oblocks;
+}
+
+static dm_dblock_t oblock_to_dblock(struct cache *cache, dm_oblock_t oblock)
+{
+ return to_dblock(block_div(from_oblock(oblock),
+ oblocks_per_dblock(cache)));
+}
+
+static dm_oblock_t dblock_to_oblock(struct cache *cache, dm_dblock_t dblock)
+{
+ return to_oblock(from_dblock(dblock) * oblocks_per_dblock(cache));
+}
+
+static void set_discard(struct cache *cache, dm_dblock_t b)
{
unsigned long flags;
+ BUG_ON(from_dblock(b) >= from_dblock(cache->discard_nr_blocks));
atomic_inc(&cache->stats.discard_count);
spin_lock_irqsave(&cache->lock, flags);
- set_bit(from_oblock(b), cache->discard_bitset);
+ set_bit(from_dblock(b), cache->discard_bitset);
spin_unlock_irqrestore(&cache->lock, flags);
}
-static void clear_discard(struct cache *cache, dm_oblock_t b)
+static void clear_discard(struct cache *cache, dm_dblock_t b)
{
unsigned long flags;
spin_lock_irqsave(&cache->lock, flags);
- clear_bit(from_oblock(b), cache->discard_bitset);
+ clear_bit(from_dblock(b), cache->discard_bitset);
spin_unlock_irqrestore(&cache->lock, flags);
}
-static bool is_discarded(struct cache *cache, dm_oblock_t b)
+static bool is_discarded(struct cache *cache, dm_dblock_t b)
{
int r;
unsigned long flags;
spin_lock_irqsave(&cache->lock, flags);
- r = test_bit(from_oblock(b), cache->discard_bitset);
+ r = test_bit(from_dblock(b), cache->discard_bitset);
spin_unlock_irqrestore(&cache->lock, flags);
return r;
@@ -562,7 +598,8 @@
unsigned long flags;
spin_lock_irqsave(&cache->lock, flags);
- r = test_bit(from_oblock(b), cache->discard_bitset);
+ r = test_bit(from_dblock(oblock_to_dblock(cache, b)),
+ cache->discard_bitset);
spin_unlock_irqrestore(&cache->lock, flags);
return r;
@@ -687,7 +724,7 @@
check_if_tick_bio_needed(cache, bio);
remap_to_origin(cache, bio);
if (bio_data_dir(bio) == WRITE)
- clear_discard(cache, oblock);
+ clear_discard(cache, oblock_to_dblock(cache, oblock));
}
static void remap_to_cache_dirty(struct cache *cache, struct bio *bio,
@@ -697,7 +734,7 @@
remap_to_cache(cache, bio, cblock);
if (bio_data_dir(bio) == WRITE) {
set_dirty(cache, oblock, cblock);
- clear_discard(cache, oblock);
+ clear_discard(cache, oblock_to_dblock(cache, oblock));
}
}
@@ -951,10 +988,14 @@
}
} else {
- clear_dirty(cache, mg->new_oblock, mg->cblock);
- if (mg->requeue_holder)
+ if (mg->requeue_holder) {
+ clear_dirty(cache, mg->new_oblock, mg->cblock);
cell_defer(cache, mg->new_ocell, true);
- else {
+ } else {
+ /*
+ * The block was promoted via an overwrite, so it's dirty.
+ */
+ set_dirty(cache, mg->new_oblock, mg->cblock);
bio_endio(mg->new_ocell->holder, 0);
cell_defer(cache, mg->new_ocell, false);
}
@@ -978,7 +1019,7 @@
wake_worker(cache);
}
-static void issue_copy_real(struct dm_cache_migration *mg)
+static void issue_copy(struct dm_cache_migration *mg)
{
int r;
struct dm_io_region o_region, c_region;
@@ -1057,11 +1098,46 @@
migration_success_pre_commit(mg);
}
-static void issue_copy(struct dm_cache_migration *mg)
+static void calc_discard_block_range(struct cache *cache, struct bio *bio,
+ dm_dblock_t *b, dm_dblock_t *e)
+{
+ sector_t sb = bio->bi_iter.bi_sector;
+ sector_t se = bio_end_sector(bio);
+
+ *b = to_dblock(dm_sector_div_up(sb, cache->discard_block_size));
+
+ if (se - sb < cache->discard_block_size)
+ *e = *b;
+ else
+ *e = to_dblock(block_div(se, cache->discard_block_size));
+}
+
+static void issue_discard(struct dm_cache_migration *mg)
+{
+ dm_dblock_t b, e;
+ struct bio *bio = mg->new_ocell->holder;
+
+ calc_discard_block_range(mg->cache, bio, &b, &e);
+ while (b != e) {
+ set_discard(mg->cache, b);
+ b = to_dblock(from_dblock(b) + 1);
+ }
+
+ bio_endio(bio, 0);
+ cell_defer(mg->cache, mg->new_ocell, false);
+ free_migration(mg);
+}
+
+static void issue_copy_or_discard(struct dm_cache_migration *mg)
{
bool avoid;
struct cache *cache = mg->cache;
+ if (mg->discard) {
+ issue_discard(mg);
+ return;
+ }
+
if (mg->writeback || mg->demote)
avoid = !is_dirty(cache, mg->cblock) ||
is_discarded_oblock(cache, mg->old_oblock);
@@ -1070,13 +1146,14 @@
avoid = is_discarded_oblock(cache, mg->new_oblock);
- if (!avoid && bio_writes_complete_block(cache, bio)) {
+ if (writeback_mode(&cache->features) &&
+ !avoid && bio_writes_complete_block(cache, bio)) {
issue_overwrite(mg, bio);
return;
}
}
- avoid ? avoid_copy(mg) : issue_copy_real(mg);
+ avoid ? avoid_copy(mg) : issue_copy(mg);
}
static void complete_migration(struct dm_cache_migration *mg)
@@ -1161,6 +1238,7 @@
struct dm_cache_migration *mg = prealloc_get_migration(structs);
mg->err = false;
+ mg->discard = false;
mg->writeback = false;
mg->demote = false;
mg->promote = true;
@@ -1184,6 +1262,7 @@
struct dm_cache_migration *mg = prealloc_get_migration(structs);
mg->err = false;
+ mg->discard = false;
mg->writeback = true;
mg->demote = false;
mg->promote = false;
@@ -1209,6 +1288,7 @@
struct dm_cache_migration *mg = prealloc_get_migration(structs);
mg->err = false;
+ mg->discard = false;
mg->writeback = false;
mg->demote = true;
mg->promote = true;
@@ -1237,6 +1317,7 @@
struct dm_cache_migration *mg = prealloc_get_migration(structs);
mg->err = false;
+ mg->discard = false;
mg->writeback = false;
mg->demote = true;
mg->promote = false;
@@ -1253,6 +1334,26 @@
quiesce_migration(mg);
}
+static void discard(struct cache *cache, struct prealloc *structs,
+ struct dm_bio_prison_cell *cell)
+{
+ struct dm_cache_migration *mg = prealloc_get_migration(structs);
+
+ mg->err = false;
+ mg->discard = true;
+ mg->writeback = false;
+ mg->demote = false;
+ mg->promote = false;
+ mg->requeue_holder = false;
+ mg->invalidate = false;
+ mg->cache = cache;
+ mg->old_ocell = NULL;
+ mg->new_ocell = cell;
+ mg->start_jiffies = jiffies;
+
+ quiesce_migration(mg);
+}
+
/*----------------------------------------------------------------
* bio processing
*--------------------------------------------------------------*/
@@ -1286,31 +1387,27 @@
issue(cache, bio);
}
-/*
- * People generally discard large parts of a device, eg, the whole device
- * when formatting. Splitting these large discards up into cache block
- * sized ios and then quiescing (always neccessary for discard) takes too
- * long.
- *
- * We keep it simple, and allow any size of discard to come in, and just
- * mark off blocks on the discard bitset. No passdown occurs!
- *
- * To implement passdown we need to change the bio_prison such that a cell
- * can have a key that spans many blocks.
- */
-static void process_discard_bio(struct cache *cache, struct bio *bio)
+static void process_discard_bio(struct cache *cache, struct prealloc *structs,
+ struct bio *bio)
{
- dm_block_t start_block = dm_sector_div_up(bio->bi_iter.bi_sector,
- cache->sectors_per_block);
- dm_block_t end_block = bio_end_sector(bio);
- dm_block_t b;
+ int r;
+ dm_dblock_t b, e;
+ struct dm_bio_prison_cell *cell_prealloc, *new_ocell;
- end_block = block_div(end_block, cache->sectors_per_block);
+ calc_discard_block_range(cache, bio, &b, &e);
+ if (b == e) {
+ bio_endio(bio, 0);
+ return;
+ }
- for (b = start_block; b < end_block; b++)
- set_discard(cache, to_oblock(b));
+ cell_prealloc = prealloc_get_cell(structs);
+ r = bio_detain_range(cache, dblock_to_oblock(cache, b), dblock_to_oblock(cache, e), bio, cell_prealloc,
+ (cell_free_fn) prealloc_put_cell,
+ structs, &new_ocell);
+ if (r > 0)
+ return;
- bio_endio(bio, 0);
+ discard(cache, structs, new_ocell);
}
static bool spare_migration_bandwidth(struct cache *cache)
@@ -1340,9 +1437,8 @@
dm_oblock_t block = get_bio_block(cache, bio);
struct dm_bio_prison_cell *cell_prealloc, *old_ocell, *new_ocell;
struct policy_result lookup_result;
- bool discarded_block = is_discarded_oblock(cache, block);
bool passthrough = passthrough_mode(&cache->features);
- bool can_migrate = !passthrough && (discarded_block || spare_migration_bandwidth(cache));
+ bool discarded_block, can_migrate;
/*
* Check to see if that block is currently migrating.
@@ -1354,6 +1450,9 @@
if (r > 0)
return;
+ discarded_block = is_discarded_oblock(cache, block);
+ can_migrate = !passthrough && (discarded_block || spare_migration_bandwidth(cache));
+
r = policy_map(cache->policy, block, true, can_migrate, discarded_block,
bio, &lookup_result);
@@ -1500,7 +1599,7 @@
if (bio->bi_rw & REQ_FLUSH)
process_flush_bio(cache, bio);
else if (bio->bi_rw & REQ_DISCARD)
- process_discard_bio(cache, bio);
+ process_discard_bio(cache, &structs, bio);
else
process_bio(cache, &structs, bio);
}
@@ -1715,7 +1814,7 @@
process_invalidation_requests(cache);
}
- process_migrations(cache, &cache->quiesced_migrations, issue_copy);
+ process_migrations(cache, &cache->quiesced_migrations, issue_copy_or_discard);
process_migrations(cache, &cache->completed_migrations, complete_migration);
if (commit_if_needed(cache)) {
@@ -2180,6 +2279,45 @@
return 0;
}
+/*
+ * We want the discard block size to be at least the size of the cache
+ * block size and have no more than 2^14 discard blocks across the origin.
+ */
+#define MAX_DISCARD_BLOCKS (1 << 14)
+
+static bool too_many_discard_blocks(sector_t discard_block_size,
+ sector_t origin_size)
+{
+ (void) sector_div(origin_size, discard_block_size);
+
+ return origin_size > MAX_DISCARD_BLOCKS;
+}
+
+static sector_t calculate_discard_block_size(sector_t cache_block_size,
+ sector_t origin_size)
+{
+ sector_t discard_block_size = cache_block_size;
+
+ if (origin_size)
+ while (too_many_discard_blocks(discard_block_size, origin_size))
+ discard_block_size *= 2;
+
+ return discard_block_size;
+}
+
+static void set_cache_size(struct cache *cache, dm_cblock_t size)
+{
+ dm_block_t nr_blocks = from_cblock(size);
+
+ if (nr_blocks > (1 << 20) && cache->cache_size != size)
+ DMWARN_LIMIT("You have created a cache device with a lot of individual cache blocks (%llu)\n"
+ "All these mappings can consume a lot of kernel memory, and take some time to read/write.\n"
+ "Please consider increasing the cache block size to reduce the overall cache block count.",
+ (unsigned long long) nr_blocks);
+
+ cache->cache_size = size;
+}
+
#define DEFAULT_MIGRATION_THRESHOLD 2048
static int cache_create(struct cache_args *ca, struct cache **result)
@@ -2204,8 +2342,7 @@
ti->num_discard_bios = 1;
ti->discards_supported = true;
ti->discard_zeroes_data_unsupported = true;
- /* Discard bios must be split on a block boundary */
- ti->split_discard_bios = true;
+ ti->split_discard_bios = false;
cache->features = ca->features;
ti->per_bio_data_size = get_per_bio_data_size(cache);
@@ -2235,10 +2372,10 @@
cache->sectors_per_block_shift = -1;
cache_size = block_div(cache_size, ca->block_size);
- cache->cache_size = to_cblock(cache_size);
+ set_cache_size(cache, to_cblock(cache_size));
} else {
cache->sectors_per_block_shift = __ffs(ca->block_size);
- cache->cache_size = to_cblock(ca->cache_sectors >> cache->sectors_per_block_shift);
+ set_cache_size(cache, to_cblock(ca->cache_sectors >> cache->sectors_per_block_shift));
}
r = create_cache_policy(cache, ca, error);
@@ -2303,13 +2440,17 @@
}
clear_bitset(cache->dirty_bitset, from_cblock(cache->cache_size));
- cache->discard_nr_blocks = cache->origin_blocks;
- cache->discard_bitset = alloc_bitset(from_oblock(cache->discard_nr_blocks));
+ cache->discard_block_size =
+ calculate_discard_block_size(cache->sectors_per_block,
+ cache->origin_sectors);
+ cache->discard_nr_blocks = to_dblock(dm_sector_div_up(cache->origin_sectors,
+ cache->discard_block_size));
+ cache->discard_bitset = alloc_bitset(from_dblock(cache->discard_nr_blocks));
if (!cache->discard_bitset) {
*error = "could not allocate discard bitset";
goto bad;
}
- clear_bitset(cache->discard_bitset, from_oblock(cache->discard_nr_blocks));
+ clear_bitset(cache->discard_bitset, from_dblock(cache->discard_nr_blocks));
cache->copier = dm_kcopyd_client_create(&dm_kcopyd_throttle);
if (IS_ERR(cache->copier)) {
@@ -2327,7 +2468,7 @@
INIT_DELAYED_WORK(&cache->waker, do_waker);
cache->last_commit_jiffies = jiffies;
- cache->prison = dm_bio_prison_create(PRISON_CELLS);
+ cache->prison = dm_bio_prison_create();
if (!cache->prison) {
*error = "could not create bio prison";
goto bad;
@@ -2549,11 +2690,11 @@
static int cache_map(struct dm_target *ti, struct bio *bio)
{
int r;
- struct dm_bio_prison_cell *cell;
+ struct dm_bio_prison_cell *cell = NULL;
struct cache *cache = ti->private;
r = __cache_map(cache, bio, &cell);
- if (r == DM_MAPIO_REMAPPED) {
+ if (r == DM_MAPIO_REMAPPED && cell) {
inc_ds(cache, bio, cell);
cell_defer(cache, cell, false);
}
@@ -2599,16 +2740,16 @@
{
unsigned i, r;
- r = dm_cache_discard_bitset_resize(cache->cmd, cache->sectors_per_block,
- cache->origin_blocks);
+ r = dm_cache_discard_bitset_resize(cache->cmd, cache->discard_block_size,
+ cache->discard_nr_blocks);
if (r) {
DMERR("could not resize on-disk discard bitset");
return r;
}
- for (i = 0; i < from_oblock(cache->discard_nr_blocks); i++) {
- r = dm_cache_set_discard(cache->cmd, to_oblock(i),
- is_discarded(cache, to_oblock(i)));
+ for (i = 0; i < from_dblock(cache->discard_nr_blocks); i++) {
+ r = dm_cache_set_discard(cache->cmd, to_dblock(i),
+ is_discarded(cache, to_dblock(i)));
if (r)
return r;
}
@@ -2680,15 +2821,86 @@
return 0;
}
-static int load_discard(void *context, sector_t discard_block_size,
- dm_oblock_t oblock, bool discard)
-{
- struct cache *cache = context;
+/*
+ * The discard block size in the on disk metadata is not
+ * neccessarily the same as we're currently using. So we have to
+ * be careful to only set the discarded attribute if we know it
+ * covers a complete block of the new size.
+ */
+struct discard_load_info {
+ struct cache *cache;
- if (discard)
- set_discard(cache, oblock);
- else
- clear_discard(cache, oblock);
+ /*
+ * These blocks are sized using the on disk dblock size, rather
+ * than the current one.
+ */
+ dm_block_t block_size;
+ dm_block_t discard_begin, discard_end;
+};
+
+static void discard_load_info_init(struct cache *cache,
+ struct discard_load_info *li)
+{
+ li->cache = cache;
+ li->discard_begin = li->discard_end = 0;
+}
+
+static void set_discard_range(struct discard_load_info *li)
+{
+ sector_t b, e;
+
+ if (li->discard_begin == li->discard_end)
+ return;
+
+ /*
+ * Convert to sectors.
+ */
+ b = li->discard_begin * li->block_size;
+ e = li->discard_end * li->block_size;
+
+ /*
+ * Then convert back to the current dblock size.
+ */
+ b = dm_sector_div_up(b, li->cache->discard_block_size);
+ sector_div(e, li->cache->discard_block_size);
+
+ /*
+ * The origin may have shrunk, so we need to check we're still in
+ * bounds.
+ */
+ if (e > from_dblock(li->cache->discard_nr_blocks))
+ e = from_dblock(li->cache->discard_nr_blocks);
+
+ for (; b < e; b++)
+ set_discard(li->cache, to_dblock(b));
+}
+
+static int load_discard(void *context, sector_t discard_block_size,
+ dm_dblock_t dblock, bool discard)
+{
+ struct discard_load_info *li = context;
+
+ li->block_size = discard_block_size;
+
+ if (discard) {
+ if (from_dblock(dblock) == li->discard_end)
+ /*
+ * We're already in a discard range, just extend it.
+ */
+ li->discard_end = li->discard_end + 1ULL;
+
+ else {
+ /*
+ * Emit the old range and start a new one.
+ */
+ set_discard_range(li);
+ li->discard_begin = from_dblock(dblock);
+ li->discard_end = li->discard_begin + 1ULL;
+ }
+ } else {
+ set_discard_range(li);
+ li->discard_begin = li->discard_end = 0;
+ }
return 0;
}
@@ -2730,7 +2942,7 @@
return r;
}
- cache->cache_size = new_size;
+ set_cache_size(cache, new_size);
return 0;
}
@@ -2772,11 +2984,22 @@
}
if (!cache->loaded_discards) {
- r = dm_cache_load_discards(cache->cmd, load_discard, cache);
+ struct discard_load_info li;
+
+ /*
+ * The discard bitset could have been resized, or the
+ * discard block size changed. To be safe we start by
+ * setting every dblock to not discarded.
+ */
+ clear_bitset(cache->discard_bitset, from_dblock(cache->discard_nr_blocks));
+
+ discard_load_info_init(cache, &li);
+ r = dm_cache_load_discards(cache->cmd, load_discard, &li);
if (r) {
DMERR("could not load origin discards");
return r;
}
+ set_discard_range(&li);
cache->loaded_discards = true;
}
@@ -3079,8 +3302,9 @@
/*
* FIXME: these limits may be incompatible with the cache device
*/
- limits->max_discard_sectors = cache->sectors_per_block;
- limits->discard_granularity = cache->sectors_per_block << SECTOR_SHIFT;
+ limits->max_discard_sectors = min_t(sector_t, cache->discard_block_size * 1024,
+ cache->origin_sectors);
+ limits->discard_granularity = cache->discard_block_size << SECTOR_SHIFT;
}
static void cache_io_hints(struct dm_target *ti, struct queue_limits *limits)
@@ -3104,7 +3328,7 @@
static struct target_type cache_target = {
.name = "cache",
- .version = {1, 5, 0},
+ .version = {1, 6, 0},
.module = THIS_MODULE,
.ctr = cache_ctr,
.dtr = cache_dtr,
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index fc93b93..08981be 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -705,7 +705,7 @@
for (i = 0; i < ((1 << SECTOR_SHIFT) / 8); i++)
crypto_xor(data + i * 8, buf, 8);
out:
- memset(buf, 0, sizeof(buf));
+ memzero_explicit(buf, sizeof(buf));
return r;
}
diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c
index 0be9381..73f791b 100644
--- a/drivers/md/dm-ioctl.c
+++ b/drivers/md/dm-ioctl.c
@@ -684,11 +684,14 @@
int srcu_idx;
param->flags &= ~(DM_SUSPEND_FLAG | DM_READONLY_FLAG |
- DM_ACTIVE_PRESENT_FLAG);
+ DM_ACTIVE_PRESENT_FLAG | DM_INTERNAL_SUSPEND_FLAG);
if (dm_suspended_md(md))
param->flags |= DM_SUSPEND_FLAG;
+ if (dm_suspended_internally_md(md))
+ param->flags |= DM_INTERNAL_SUSPEND_FLAG;
+
if (dm_test_deferred_remove_flag(md))
param->flags |= DM_DEFERRED_REMOVE;
diff --git a/drivers/md/dm-stats.c b/drivers/md/dm-stats.c
index 87f86c7..f478a4c 100644
--- a/drivers/md/dm-stats.c
+++ b/drivers/md/dm-stats.c
@@ -824,7 +824,7 @@
return 1;
id = dm_stats_create(dm_get_stats(md), start, end, step, program_id, aux_data,
- dm_internal_suspend, dm_internal_resume, md);
+ dm_internal_suspend_fast, dm_internal_resume_fast, md);
if (id < 0)
return id;
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index b2bd1eb..3afae9e 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1521,18 +1521,32 @@
}
EXPORT_SYMBOL(dm_table_get_mode);
-static void suspend_targets(struct dm_table *t, unsigned postsuspend)
+enum suspend_mode {
+ PRESUSPEND,
+ PRESUSPEND_UNDO,
+ POSTSUSPEND,
+};
+
+static void suspend_targets(struct dm_table *t, enum suspend_mode mode)
{
int i = t->num_targets;
struct dm_target *ti = t->targets;
while (i--) {
- if (postsuspend) {
+ switch (mode) {
+ case PRESUSPEND:
+ if (ti->type->presuspend)
+ ti->type->presuspend(ti);
+ break;
+ case PRESUSPEND_UNDO:
+ if (ti->type->presuspend_undo)
+ ti->type->presuspend_undo(ti);
+ break;
+ case POSTSUSPEND:
if (ti->type->postsuspend)
ti->type->postsuspend(ti);
- } else if (ti->type->presuspend)
- ti->type->presuspend(ti);
-
+ break;
+ }
ti++;
}
}
@@ -1542,7 +1556,15 @@
if (!t)
return;
- suspend_targets(t, 0);
+ suspend_targets(t, PRESUSPEND);
+}
+
+void dm_table_presuspend_undo_targets(struct dm_table *t)
+{
+ if (!t)
+ return;
+
+ suspend_targets(t, PRESUSPEND_UNDO);
}
void dm_table_postsuspend_targets(struct dm_table *t)
@@ -1550,7 +1572,7 @@
if (!t)
return;
- suspend_targets(t, 1);
+ suspend_targets(t, POSTSUSPEND);
}
int dm_table_resume_targets(struct dm_table *t)
diff --git a/drivers/md/dm-thin-metadata.c b/drivers/md/dm-thin-metadata.c
index e9d33ad..43adbb8 100644
--- a/drivers/md/dm-thin-metadata.c
+++ b/drivers/md/dm-thin-metadata.c
@@ -1384,42 +1384,38 @@
}
int dm_thin_find_block(struct dm_thin_device *td, dm_block_t block,
- int can_block, struct dm_thin_lookup_result *result)
+ int can_issue_io, struct dm_thin_lookup_result *result)
{
- int r = -EINVAL;
- uint64_t block_time = 0;
+ int r;
__le64 value;
struct dm_pool_metadata *pmd = td->pmd;
dm_block_t keys[2] = { td->id, block };
struct dm_btree_info *info;
- if (can_block) {
- down_read(&pmd->root_lock);
- info = &pmd->info;
- } else if (down_read_trylock(&pmd->root_lock))
- info = &pmd->nb_info;
- else
- return -EWOULDBLOCK;
-
if (pmd->fail_io)
- goto out;
+ return -EINVAL;
+
+ down_read(&pmd->root_lock);
+
+ if (can_issue_io) {
+ info = &pmd->info;
+ } else
+ info = &pmd->nb_info;
r = dm_btree_lookup(info, pmd->root, keys, &value);
- if (!r)
- block_time = le64_to_cpu(value);
-
-out:
- up_read(&pmd->root_lock);
-
if (!r) {
+ uint64_t block_time = 0;
dm_block_t exception_block;
uint32_t exception_time;
+
+ block_time = le64_to_cpu(value);
unpack_block_time(block_time, &exception_block,
&exception_time);
result->block = exception_block;
result->shared = __snapshotted_since(td, exception_time);
}
+ up_read(&pmd->root_lock);
return r;
}
@@ -1813,3 +1809,8 @@
return needs_check;
}
+
+void dm_pool_issue_prefetches(struct dm_pool_metadata *pmd)
+{
+ dm_tm_issue_prefetches(pmd->tm);
+}
diff --git a/drivers/md/dm-thin-metadata.h b/drivers/md/dm-thin-metadata.h
index e3c857d..921d15e 100644
--- a/drivers/md/dm-thin-metadata.h
+++ b/drivers/md/dm-thin-metadata.h
@@ -139,12 +139,12 @@
/*
* Returns:
- * -EWOULDBLOCK iff @can_block is set and would block.
+ * -EWOULDBLOCK iff @can_issue_io is set and would issue IO
* -ENODATA iff that mapping is not present.
* 0 success
*/
int dm_thin_find_block(struct dm_thin_device *td, dm_block_t block,
- int can_block, struct dm_thin_lookup_result *result);
+ int can_issue_io, struct dm_thin_lookup_result *result);
/*
* Obtain an unused block.
@@ -213,6 +213,11 @@
int dm_pool_metadata_set_needs_check(struct dm_pool_metadata *pmd);
bool dm_pool_metadata_needs_check(struct dm_pool_metadata *pmd);
+/*
+ * Issue any prefetches that may be useful.
+ */
+void dm_pool_issue_prefetches(struct dm_pool_metadata *pmd);
+
/*----------------------------------------------------------------*/
#endif
diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c
index 0f86d80..8735543 100644
--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -11,11 +11,13 @@
#include <linux/device-mapper.h>
#include <linux/dm-io.h>
#include <linux/dm-kcopyd.h>
+#include <linux/log2.h>
#include <linux/list.h>
#include <linux/rculist.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/sort.h>
#include <linux/rbtree.h>
#define DM_MSG_PREFIX "thin"
@@ -25,7 +27,6 @@
*/
#define ENDIO_HOOK_POOL_SIZE 1024
#define MAPPING_POOL_SIZE 1024
-#define PRISON_CELLS 1024
#define COMMIT_PERIOD HZ
#define NO_SPACE_TIMEOUT_SECS 60
@@ -114,7 +115,8 @@
{
key->virtual = 0;
key->dev = dm_thin_dev_id(td);
- key->block = b;
+ key->block_begin = b;
+ key->block_end = b + 1ULL;
}
static void build_virtual_key(struct dm_thin_device *td, dm_block_t b,
@@ -122,7 +124,55 @@
{
key->virtual = 1;
key->dev = dm_thin_dev_id(td);
- key->block = b;
+ key->block_begin = b;
+ key->block_end = b + 1ULL;
+}
+
+/*----------------------------------------------------------------*/
+
+#define THROTTLE_THRESHOLD (1 * HZ)
+
+struct throttle {
+ struct rw_semaphore lock;
+ unsigned long threshold;
+ bool throttle_applied;
+};
+
+static void throttle_init(struct throttle *t)
+{
+ init_rwsem(&t->lock);
+ t->throttle_applied = false;
+}
+
+static void throttle_work_start(struct throttle *t)
+{
+ t->threshold = jiffies + THROTTLE_THRESHOLD;
+}
+
+static void throttle_work_update(struct throttle *t)
+{
+ if (!t->throttle_applied && jiffies > t->threshold) {
+ down_write(&t->lock);
+ t->throttle_applied = true;
+ }
+}
+
+static void throttle_work_complete(struct throttle *t)
+{
+ if (t->throttle_applied) {
+ t->throttle_applied = false;
+ up_write(&t->lock);
+ }
+}
+
+static void throttle_lock(struct throttle *t)
+{
+ down_read(&t->lock);
+}
+
+static void throttle_unlock(struct throttle *t)
+{
+ up_read(&t->lock);
}
/*----------------------------------------------------------------*/
@@ -155,8 +205,11 @@
struct thin_c;
typedef void (*process_bio_fn)(struct thin_c *tc, struct bio *bio);
+typedef void (*process_cell_fn)(struct thin_c *tc, struct dm_bio_prison_cell *cell);
typedef void (*process_mapping_fn)(struct dm_thin_new_mapping *m);
+#define CELL_SORT_ARRAY_SIZE 8192
+
struct pool {
struct list_head list;
struct dm_target *ti; /* Only set if a pool target is bound */
@@ -171,11 +224,13 @@
struct pool_features pf;
bool low_water_triggered:1; /* A dm event has been sent */
+ bool suspended:1;
struct dm_bio_prison *prison;
struct dm_kcopyd_client *copier;
struct workqueue_struct *wq;
+ struct throttle throttle;
struct work_struct worker;
struct delayed_work waker;
struct delayed_work no_space_timeout;
@@ -198,8 +253,13 @@
process_bio_fn process_bio;
process_bio_fn process_discard;
+ process_cell_fn process_cell;
+ process_cell_fn process_discard_cell;
+
process_mapping_fn process_prepared_mapping;
process_mapping_fn process_prepared_discard;
+
+ struct dm_bio_prison_cell *cell_sort_array[CELL_SORT_ARRAY_SIZE];
};
static enum pool_mode get_pool_mode(struct pool *pool);
@@ -232,8 +292,11 @@
struct pool *pool;
struct dm_thin_device *td;
+ struct mapped_device *thin_md;
+
bool requeue_mode:1;
spinlock_t lock;
+ struct list_head deferred_cells;
struct bio_list deferred_bio_list;
struct bio_list retry_on_resume_list;
struct rb_root sort_bio_list; /* sorted list of deferred bios */
@@ -290,6 +353,15 @@
dm_bio_prison_free_cell(pool->prison, cell);
}
+static void cell_visit_release(struct pool *pool,
+ void (*fn)(void *, struct dm_bio_prison_cell *),
+ void *context,
+ struct dm_bio_prison_cell *cell)
+{
+ dm_cell_visit_release(pool->prison, fn, context, cell);
+ dm_bio_prison_free_cell(pool->prison, cell);
+}
+
static void cell_release_no_holder(struct pool *pool,
struct dm_bio_prison_cell *cell,
struct bio_list *bios)
@@ -298,19 +370,6 @@
dm_bio_prison_free_cell(pool->prison, cell);
}
-static void cell_defer_no_holder_no_free(struct thin_c *tc,
- struct dm_bio_prison_cell *cell)
-{
- struct pool *pool = tc->pool;
- unsigned long flags;
-
- spin_lock_irqsave(&tc->lock, flags);
- dm_cell_release_no_holder(pool->prison, cell, &tc->deferred_bio_list);
- spin_unlock_irqrestore(&tc->lock, flags);
-
- wake_worker(pool);
-}
-
static void cell_error_with_code(struct pool *pool,
struct dm_bio_prison_cell *cell, int error_code)
{
@@ -323,6 +382,16 @@
cell_error_with_code(pool, cell, -EIO);
}
+static void cell_success(struct pool *pool, struct dm_bio_prison_cell *cell)
+{
+ cell_error_with_code(pool, cell, 0);
+}
+
+static void cell_requeue(struct pool *pool, struct dm_bio_prison_cell *cell)
+{
+ cell_error_with_code(pool, cell, DM_ENDIO_REQUEUE);
+}
+
/*----------------------------------------------------------------*/
/*
@@ -393,44 +462,65 @@
struct rb_node rb_node;
};
-static void requeue_bio_list(struct thin_c *tc, struct bio_list *master)
+static void __merge_bio_list(struct bio_list *bios, struct bio_list *master)
+{
+ bio_list_merge(bios, master);
+ bio_list_init(master);
+}
+
+static void error_bio_list(struct bio_list *bios, int error)
{
struct bio *bio;
+
+ while ((bio = bio_list_pop(bios)))
+ bio_endio(bio, error);
+}
+
+static void error_thin_bio_list(struct thin_c *tc, struct bio_list *master, int error)
+{
struct bio_list bios;
unsigned long flags;
bio_list_init(&bios);
spin_lock_irqsave(&tc->lock, flags);
- bio_list_merge(&bios, master);
- bio_list_init(master);
+ __merge_bio_list(&bios, master);
spin_unlock_irqrestore(&tc->lock, flags);
- while ((bio = bio_list_pop(&bios)))
- bio_endio(bio, DM_ENDIO_REQUEUE);
+ error_bio_list(&bios, error);
+}
+
+static void requeue_deferred_cells(struct thin_c *tc)
+{
+ struct pool *pool = tc->pool;
+ unsigned long flags;
+ struct list_head cells;
+ struct dm_bio_prison_cell *cell, *tmp;
+
+ INIT_LIST_HEAD(&cells);
+
+ spin_lock_irqsave(&tc->lock, flags);
+ list_splice_init(&tc->deferred_cells, &cells);
+ spin_unlock_irqrestore(&tc->lock, flags);
+
+ list_for_each_entry_safe(cell, tmp, &cells, user_list)
+ cell_requeue(pool, cell);
}
static void requeue_io(struct thin_c *tc)
{
- requeue_bio_list(tc, &tc->deferred_bio_list);
- requeue_bio_list(tc, &tc->retry_on_resume_list);
-}
-
-static void error_thin_retry_list(struct thin_c *tc)
-{
- struct bio *bio;
- unsigned long flags;
struct bio_list bios;
+ unsigned long flags;
bio_list_init(&bios);
spin_lock_irqsave(&tc->lock, flags);
- bio_list_merge(&bios, &tc->retry_on_resume_list);
- bio_list_init(&tc->retry_on_resume_list);
+ __merge_bio_list(&bios, &tc->deferred_bio_list);
+ __merge_bio_list(&bios, &tc->retry_on_resume_list);
spin_unlock_irqrestore(&tc->lock, flags);
- while ((bio = bio_list_pop(&bios)))
- bio_io_error(bio);
+ error_bio_list(&bios, DM_ENDIO_REQUEUE);
+ requeue_deferred_cells(tc);
}
static void error_retry_list(struct pool *pool)
@@ -439,7 +529,7 @@
rcu_read_lock();
list_for_each_entry_rcu(tc, &pool->active_thins, list)
- error_thin_retry_list(tc);
+ error_thin_bio_list(tc, &tc->retry_on_resume_list, -EIO);
rcu_read_unlock();
}
@@ -629,22 +719,8 @@
*/
/*
- * This sends the bios in the cell back to the deferred_bios list.
- */
-static void cell_defer(struct thin_c *tc, struct dm_bio_prison_cell *cell)
-{
- struct pool *pool = tc->pool;
- unsigned long flags;
-
- spin_lock_irqsave(&tc->lock, flags);
- cell_release(pool, cell, &tc->deferred_bio_list);
- spin_unlock_irqrestore(&tc->lock, flags);
-
- wake_worker(pool);
-}
-
-/*
- * Same as cell_defer above, except it omits the original holder of the cell.
+ * This sends the bios in the cell, except the original holder, back
+ * to the deferred_bios list.
*/
static void cell_defer_no_holder(struct thin_c *tc, struct dm_bio_prison_cell *cell)
{
@@ -658,6 +734,62 @@
wake_worker(pool);
}
+static void thin_defer_bio(struct thin_c *tc, struct bio *bio);
+
+struct remap_info {
+ struct thin_c *tc;
+ struct bio_list defer_bios;
+ struct bio_list issue_bios;
+};
+
+static void __inc_remap_and_issue_cell(void *context,
+ struct dm_bio_prison_cell *cell)
+{
+ struct remap_info *info = context;
+ struct bio *bio;
+
+ while ((bio = bio_list_pop(&cell->bios))) {
+ if (bio->bi_rw & (REQ_DISCARD | REQ_FLUSH | REQ_FUA))
+ bio_list_add(&info->defer_bios, bio);
+ else {
+ inc_all_io_entry(info->tc->pool, bio);
+
+ /*
+ * We can't issue the bios with the bio prison lock
+ * held, so we add them to a list to issue on
+ * return from this function.
+ */
+ bio_list_add(&info->issue_bios, bio);
+ }
+ }
+}
+
+static void inc_remap_and_issue_cell(struct thin_c *tc,
+ struct dm_bio_prison_cell *cell,
+ dm_block_t block)
+{
+ struct bio *bio;
+ struct remap_info info;
+
+ info.tc = tc;
+ bio_list_init(&info.defer_bios);
+ bio_list_init(&info.issue_bios);
+
+ /*
+ * We have to be careful to inc any bios we're about to issue
+ * before the cell is released, and avoid a race with new bios
+ * being added to the cell.
+ */
+ cell_visit_release(tc->pool, __inc_remap_and_issue_cell,
+ &info, cell);
+
+ while ((bio = bio_list_pop(&info.defer_bios)))
+ thin_defer_bio(tc, bio);
+
+ while ((bio = bio_list_pop(&info.issue_bios)))
+ remap_and_issue(info.tc, bio, block);
+}
+
static void process_prepared_mapping_fail(struct dm_thin_new_mapping *m)
{
if (m->bio) {
@@ -706,10 +838,13 @@
* the bios in the cell.
*/
if (bio) {
- cell_defer_no_holder(tc, m->cell);
+ inc_remap_and_issue_cell(tc, m->cell, m->data_block);
bio_endio(bio, 0);
- } else
- cell_defer(tc, m->cell);
+ } else {
+ inc_all_io_entry(tc->pool, m->cell->holder);
+ remap_and_issue(tc, m->cell->holder, m->data_block);
+ inc_remap_and_issue_cell(tc, m->cell, m->data_block);
+ }
out:
list_del(&m->list);
@@ -842,6 +977,20 @@
}
}
+static void remap_and_issue_overwrite(struct thin_c *tc, struct bio *bio,
+ dm_block_t data_block,
+ struct dm_thin_new_mapping *m)
+{
+ struct pool *pool = tc->pool;
+ struct dm_thin_endio_hook *h = dm_per_bio_data(bio, sizeof(struct dm_thin_endio_hook));
+
+ h->overwrite_mapping = m;
+ m->bio = bio;
+ save_and_set_endio(bio, &m->saved_bi_end_io, overwrite_endio);
+ inc_all_io_entry(pool, bio);
+ remap_and_issue(tc, bio, data_block);
+}
+
/*
* A partial copy also needs to zero the uncopied region.
*/
@@ -876,15 +1025,9 @@
* If the whole block of data is being overwritten, we can issue the
* bio immediately. Otherwise we use kcopyd to clone the data first.
*/
- if (io_overwrites_block(pool, bio)) {
- struct dm_thin_endio_hook *h = dm_per_bio_data(bio, sizeof(struct dm_thin_endio_hook));
-
- h->overwrite_mapping = m;
- m->bio = bio;
- save_and_set_endio(bio, &m->saved_bi_end_io, overwrite_endio);
- inc_all_io_entry(pool, bio);
- remap_and_issue(tc, bio, data_dest);
- } else {
+ if (io_overwrites_block(pool, bio))
+ remap_and_issue_overwrite(tc, bio, data_dest, m);
+ else {
struct dm_io_region from, to;
from.bdev = origin->bdev;
@@ -953,16 +1096,10 @@
if (!pool->pf.zero_new_blocks)
process_prepared_mapping(m);
- else if (io_overwrites_block(pool, bio)) {
- struct dm_thin_endio_hook *h = dm_per_bio_data(bio, sizeof(struct dm_thin_endio_hook));
+ else if (io_overwrites_block(pool, bio))
+ remap_and_issue_overwrite(tc, bio, data_block, m);
- h->overwrite_mapping = m;
- m->bio = bio;
- save_and_set_endio(bio, &m->saved_bi_end_io, overwrite_endio);
- inc_all_io_entry(pool, bio);
- remap_and_issue(tc, bio, data_block);
-
- } else
+ else
ll_zero(tc, m,
data_block * pool->sectors_per_block,
(data_block + 1) * pool->sectors_per_block);
@@ -1134,29 +1271,25 @@
bio_list_init(&bios);
cell_release(pool, cell, &bios);
- error = should_error_unserviceable_bio(pool);
- if (error)
- while ((bio = bio_list_pop(&bios)))
- bio_endio(bio, error);
- else
- while ((bio = bio_list_pop(&bios)))
- retry_on_resume(bio);
+ while ((bio = bio_list_pop(&bios)))
+ retry_on_resume(bio);
}
-static void process_discard(struct thin_c *tc, struct bio *bio)
+static void process_discard_cell(struct thin_c *tc, struct dm_bio_prison_cell *cell)
{
int r;
- unsigned long flags;
+ struct bio *bio = cell->holder;
struct pool *pool = tc->pool;
- struct dm_bio_prison_cell *cell, *cell2;
- struct dm_cell_key key, key2;
+ struct dm_bio_prison_cell *cell2;
+ struct dm_cell_key key2;
dm_block_t block = get_bio_block(tc, bio);
struct dm_thin_lookup_result lookup_result;
struct dm_thin_new_mapping *m;
- build_virtual_key(tc->td, block, &key);
- if (bio_detain(tc->pool, &key, bio, &cell))
+ if (tc->requeue_mode) {
+ cell_requeue(pool, cell);
return;
+ }
r = dm_thin_find_block(tc->td, block, 1, &lookup_result);
switch (r) {
@@ -1187,12 +1320,9 @@
m->cell2 = cell2;
m->bio = bio;
- if (!dm_deferred_set_add_work(pool->all_io_ds, &m->list)) {
- spin_lock_irqsave(&pool->lock, flags);
- list_add_tail(&m->list, &pool->prepared_discards);
- spin_unlock_irqrestore(&pool->lock, flags);
- wake_worker(pool);
- }
+ if (!dm_deferred_set_add_work(pool->all_io_ds, &m->list))
+ pool->process_prepared_discard(m);
+
} else {
inc_all_io_entry(pool, bio);
cell_defer_no_holder(tc, cell);
@@ -1227,6 +1357,19 @@
}
}
+static void process_discard_bio(struct thin_c *tc, struct bio *bio)
+{
+ struct dm_bio_prison_cell *cell;
+ struct dm_cell_key key;
+ dm_block_t block = get_bio_block(tc, bio);
+
+ build_virtual_key(tc->td, block, &key);
+ if (bio_detain(tc->pool, &key, bio, &cell))
+ return;
+
+ process_discard_cell(tc, cell);
+}
+
static void break_sharing(struct thin_c *tc, struct bio *bio, dm_block_t block,
struct dm_cell_key *key,
struct dm_thin_lookup_result *lookup_result,
@@ -1255,11 +1398,53 @@
}
}
+static void __remap_and_issue_shared_cell(void *context,
+ struct dm_bio_prison_cell *cell)
+{
+ struct remap_info *info = context;
+ struct bio *bio;
+
+ while ((bio = bio_list_pop(&cell->bios))) {
+ if ((bio_data_dir(bio) == WRITE) ||
+ (bio->bi_rw & (REQ_DISCARD | REQ_FLUSH | REQ_FUA)))
+ bio_list_add(&info->defer_bios, bio);
+ else {
+ struct dm_thin_endio_hook *h = dm_per_bio_data(bio, sizeof(struct dm_thin_endio_hook));;
+
+ h->shared_read_entry = dm_deferred_entry_inc(info->tc->pool->shared_read_ds);
+ inc_all_io_entry(info->tc->pool, bio);
+ bio_list_add(&info->issue_bios, bio);
+ }
+ }
+}
+
+static void remap_and_issue_shared_cell(struct thin_c *tc,
+ struct dm_bio_prison_cell *cell,
+ dm_block_t block)
+{
+ struct bio *bio;
+ struct remap_info info;
+
+ info.tc = tc;
+ bio_list_init(&info.defer_bios);
+ bio_list_init(&info.issue_bios);
+
+ cell_visit_release(tc->pool, __remap_and_issue_shared_cell,
+ &info, cell);
+
+ while ((bio = bio_list_pop(&info.defer_bios)))
+ thin_defer_bio(tc, bio);
+
+ while ((bio = bio_list_pop(&info.issue_bios)))
+ remap_and_issue(tc, bio, block);
+}
+
static void process_shared_bio(struct thin_c *tc, struct bio *bio,
dm_block_t block,
- struct dm_thin_lookup_result *lookup_result)
+ struct dm_thin_lookup_result *lookup_result,
+ struct dm_bio_prison_cell *virt_cell)
{
- struct dm_bio_prison_cell *cell;
+ struct dm_bio_prison_cell *data_cell;
struct pool *pool = tc->pool;
struct dm_cell_key key;
@@ -1268,19 +1453,23 @@
* of being broken so we have nothing further to do here.
*/
build_data_key(tc->td, lookup_result->block, &key);
- if (bio_detain(pool, &key, bio, &cell))
+ if (bio_detain(pool, &key, bio, &data_cell)) {
+ cell_defer_no_holder(tc, virt_cell);
return;
+ }
- if (bio_data_dir(bio) == WRITE && bio->bi_iter.bi_size)
- break_sharing(tc, bio, block, &key, lookup_result, cell);
- else {
+ if (bio_data_dir(bio) == WRITE && bio->bi_iter.bi_size) {
+ break_sharing(tc, bio, block, &key, lookup_result, data_cell);
+ cell_defer_no_holder(tc, virt_cell);
+ } else {
struct dm_thin_endio_hook *h = dm_per_bio_data(bio, sizeof(struct dm_thin_endio_hook));
h->shared_read_entry = dm_deferred_entry_inc(pool->shared_read_ds);
inc_all_io_entry(pool, bio);
- cell_defer_no_holder(tc, cell);
-
remap_and_issue(tc, bio, lookup_result->block);
+
+ remap_and_issue_shared_cell(tc, data_cell, lookup_result->block);
+ remap_and_issue_shared_cell(tc, virt_cell, lookup_result->block);
}
}
@@ -1333,34 +1522,28 @@
}
}
-static void process_bio(struct thin_c *tc, struct bio *bio)
+static void process_cell(struct thin_c *tc, struct dm_bio_prison_cell *cell)
{
int r;
struct pool *pool = tc->pool;
+ struct bio *bio = cell->holder;
dm_block_t block = get_bio_block(tc, bio);
- struct dm_bio_prison_cell *cell;
- struct dm_cell_key key;
struct dm_thin_lookup_result lookup_result;
- /*
- * If cell is already occupied, then the block is already
- * being provisioned so we have nothing further to do here.
- */
- build_virtual_key(tc->td, block, &key);
- if (bio_detain(pool, &key, bio, &cell))
+ if (tc->requeue_mode) {
+ cell_requeue(pool, cell);
return;
+ }
r = dm_thin_find_block(tc->td, block, 1, &lookup_result);
switch (r) {
case 0:
- if (lookup_result.shared) {
- process_shared_bio(tc, bio, block, &lookup_result);
- cell_defer_no_holder(tc, cell); /* FIXME: pass this cell into process_shared? */
- } else {
+ if (lookup_result.shared)
+ process_shared_bio(tc, bio, block, &lookup_result, cell);
+ else {
inc_all_io_entry(pool, bio);
- cell_defer_no_holder(tc, cell);
-
remap_and_issue(tc, bio, lookup_result.block);
+ inc_remap_and_issue_cell(tc, cell, lookup_result.block);
}
break;
@@ -1394,7 +1577,26 @@
}
}
-static void process_bio_read_only(struct thin_c *tc, struct bio *bio)
+static void process_bio(struct thin_c *tc, struct bio *bio)
+{
+ struct pool *pool = tc->pool;
+ dm_block_t block = get_bio_block(tc, bio);
+ struct dm_bio_prison_cell *cell;
+ struct dm_cell_key key;
+
+ /*
+ * If cell is already occupied, then the block is already
+ * being provisioned so we have nothing further to do here.
+ */
+ build_virtual_key(tc->td, block, &key);
+ if (bio_detain(pool, &key, bio, &cell))
+ return;
+
+ process_cell(tc, cell);
+}
+
+static void __process_bio_read_only(struct thin_c *tc, struct bio *bio,
+ struct dm_bio_prison_cell *cell)
{
int r;
int rw = bio_data_dir(bio);
@@ -1404,15 +1606,21 @@
r = dm_thin_find_block(tc->td, block, 1, &lookup_result);
switch (r) {
case 0:
- if (lookup_result.shared && (rw == WRITE) && bio->bi_iter.bi_size)
+ if (lookup_result.shared && (rw == WRITE) && bio->bi_iter.bi_size) {
handle_unserviceable_bio(tc->pool, bio);
- else {
+ if (cell)
+ cell_defer_no_holder(tc, cell);
+ } else {
inc_all_io_entry(tc->pool, bio);
remap_and_issue(tc, bio, lookup_result.block);
+ if (cell)
+ inc_remap_and_issue_cell(tc, cell, lookup_result.block);
}
break;
case -ENODATA:
+ if (cell)
+ cell_defer_no_holder(tc, cell);
if (rw != READ) {
handle_unserviceable_bio(tc->pool, bio);
break;
@@ -1431,11 +1639,23 @@
default:
DMERR_LIMIT("%s: dm_thin_find_block() failed: error = %d",
__func__, r);
+ if (cell)
+ cell_defer_no_holder(tc, cell);
bio_io_error(bio);
break;
}
}
+static void process_bio_read_only(struct thin_c *tc, struct bio *bio)
+{
+ __process_bio_read_only(tc, bio, NULL);
+}
+
+static void process_cell_read_only(struct thin_c *tc, struct dm_bio_prison_cell *cell)
+{
+ __process_bio_read_only(tc, cell->holder, cell);
+}
+
static void process_bio_success(struct thin_c *tc, struct bio *bio)
{
bio_endio(bio, 0);
@@ -1446,6 +1666,16 @@
bio_io_error(bio);
}
+static void process_cell_success(struct thin_c *tc, struct dm_bio_prison_cell *cell)
+{
+ cell_success(tc->pool, cell);
+}
+
+static void process_cell_fail(struct thin_c *tc, struct dm_bio_prison_cell *cell)
+{
+ cell_error(tc->pool, cell);
+}
+
/*
* FIXME: should we also commit due to size of transaction, measured in
* metadata blocks?
@@ -1527,9 +1757,10 @@
struct bio *bio;
struct bio_list bios;
struct blk_plug plug;
+ unsigned count = 0;
if (tc->requeue_mode) {
- requeue_bio_list(tc, &tc->deferred_bio_list);
+ error_thin_bio_list(tc, &tc->deferred_bio_list, DM_ENDIO_REQUEUE);
return;
}
@@ -1568,10 +1799,97 @@
pool->process_discard(tc, bio);
else
pool->process_bio(tc, bio);
+
+ if ((count++ & 127) == 0) {
+ throttle_work_update(&pool->throttle);
+ dm_pool_issue_prefetches(pool->pmd);
+ }
}
blk_finish_plug(&plug);
}
+static int cmp_cells(const void *lhs, const void *rhs)
+{
+ struct dm_bio_prison_cell *lhs_cell = *((struct dm_bio_prison_cell **) lhs);
+ struct dm_bio_prison_cell *rhs_cell = *((struct dm_bio_prison_cell **) rhs);
+
+ BUG_ON(!lhs_cell->holder);
+ BUG_ON(!rhs_cell->holder);
+
+ if (lhs_cell->holder->bi_iter.bi_sector < rhs_cell->holder->bi_iter.bi_sector)
+ return -1;
+
+ if (lhs_cell->holder->bi_iter.bi_sector > rhs_cell->holder->bi_iter.bi_sector)
+ return 1;
+
+ return 0;
+}
+
+static unsigned sort_cells(struct pool *pool, struct list_head *cells)
+{
+ unsigned count = 0;
+ struct dm_bio_prison_cell *cell, *tmp;
+
+ list_for_each_entry_safe(cell, tmp, cells, user_list) {
+ if (count >= CELL_SORT_ARRAY_SIZE)
+ break;
+
+ pool->cell_sort_array[count++] = cell;
+ list_del(&cell->user_list);
+ }
+
+ sort(pool->cell_sort_array, count, sizeof(cell), cmp_cells, NULL);
+
+ return count;
+}
+
+static void process_thin_deferred_cells(struct thin_c *tc)
+{
+ struct pool *pool = tc->pool;
+ unsigned long flags;
+ struct list_head cells;
+ struct dm_bio_prison_cell *cell;
+ unsigned i, j, count;
+
+ INIT_LIST_HEAD(&cells);
+
+ spin_lock_irqsave(&tc->lock, flags);
+ list_splice_init(&tc->deferred_cells, &cells);
+ spin_unlock_irqrestore(&tc->lock, flags);
+
+ if (list_empty(&cells))
+ return;
+
+ do {
+ count = sort_cells(tc->pool, &cells);
+
+ for (i = 0; i < count; i++) {
+ cell = pool->cell_sort_array[i];
+ BUG_ON(!cell->holder);
+
+ /*
+ * If we've got no free new_mapping structs, and processing
+ * this bio might require one, we pause until there are some
+ * prepared mappings to process.
+ */
+ if (ensure_next_mapping(pool)) {
+ for (j = i; j < count; j++)
+ list_add(&pool->cell_sort_array[j]->user_list, &cells);
+
+ spin_lock_irqsave(&tc->lock, flags);
+ list_splice(&cells, &tc->deferred_cells);
+ spin_unlock_irqrestore(&tc->lock, flags);
+ return;
+ }
+
+ if (cell->holder->bi_rw & REQ_DISCARD)
+ pool->process_discard_cell(tc, cell);
+ else
+ pool->process_cell(tc, cell);
+ }
+ } while (!list_empty(&cells));
+}
+
static void thin_get(struct thin_c *tc);
static void thin_put(struct thin_c *tc);
@@ -1620,6 +1938,7 @@
tc = get_first_thin(pool);
while (tc) {
+ process_thin_deferred_cells(tc);
process_thin_deferred_bios(tc);
tc = get_next_thin(pool, tc);
}
@@ -1653,9 +1972,15 @@
{
struct pool *pool = container_of(ws, struct pool, worker);
+ throttle_work_start(&pool->throttle);
+ dm_pool_issue_prefetches(pool->pmd);
+ throttle_work_update(&pool->throttle);
process_prepared(pool, &pool->prepared_mappings, &pool->process_prepared_mapping);
+ throttle_work_update(&pool->throttle);
process_prepared(pool, &pool->prepared_discards, &pool->process_prepared_discard);
+ throttle_work_update(&pool->throttle);
process_deferred_bios(pool);
+ throttle_work_complete(&pool->throttle);
}
/*
@@ -1792,6 +2117,8 @@
dm_pool_metadata_read_only(pool->pmd);
pool->process_bio = process_bio_fail;
pool->process_discard = process_bio_fail;
+ pool->process_cell = process_cell_fail;
+ pool->process_discard_cell = process_cell_fail;
pool->process_prepared_mapping = process_prepared_mapping_fail;
pool->process_prepared_discard = process_prepared_discard_fail;
@@ -1804,6 +2131,8 @@
dm_pool_metadata_read_only(pool->pmd);
pool->process_bio = process_bio_read_only;
pool->process_discard = process_bio_success;
+ pool->process_cell = process_cell_read_only;
+ pool->process_discard_cell = process_cell_success;
pool->process_prepared_mapping = process_prepared_mapping_fail;
pool->process_prepared_discard = process_prepared_discard_passdown;
@@ -1822,7 +2151,9 @@
if (old_mode != new_mode)
notify_of_pool_mode_change(pool, "out-of-data-space");
pool->process_bio = process_bio_read_only;
- pool->process_discard = process_discard;
+ pool->process_discard = process_discard_bio;
+ pool->process_cell = process_cell_read_only;
+ pool->process_discard_cell = process_discard_cell;
pool->process_prepared_mapping = process_prepared_mapping;
pool->process_prepared_discard = process_prepared_discard_passdown;
@@ -1835,7 +2166,9 @@
notify_of_pool_mode_change(pool, "write");
dm_pool_metadata_read_write(pool->pmd);
pool->process_bio = process_bio;
- pool->process_discard = process_discard;
+ pool->process_discard = process_discard_bio;
+ pool->process_cell = process_cell;
+ pool->process_discard_cell = process_discard_cell;
pool->process_prepared_mapping = process_prepared_mapping;
pool->process_prepared_discard = process_prepared_discard;
break;
@@ -1895,6 +2228,29 @@
wake_worker(pool);
}
+static void thin_defer_bio_with_throttle(struct thin_c *tc, struct bio *bio)
+{
+ struct pool *pool = tc->pool;
+
+ throttle_lock(&pool->throttle);
+ thin_defer_bio(tc, bio);
+ throttle_unlock(&pool->throttle);
+}
+
+static void thin_defer_cell(struct thin_c *tc, struct dm_bio_prison_cell *cell)
+{
+ unsigned long flags;
+ struct pool *pool = tc->pool;
+
+ throttle_lock(&pool->throttle);
+ spin_lock_irqsave(&tc->lock, flags);
+ list_add_tail(&cell->user_list, &tc->deferred_cells);
+ spin_unlock_irqrestore(&tc->lock, flags);
+ throttle_unlock(&pool->throttle);
+
+ wake_worker(pool);
+}
+
static void thin_hook_bio(struct thin_c *tc, struct bio *bio)
{
struct dm_thin_endio_hook *h = dm_per_bio_data(bio, sizeof(struct dm_thin_endio_hook));
@@ -1915,8 +2271,7 @@
dm_block_t block = get_bio_block(tc, bio);
struct dm_thin_device *td = tc->td;
struct dm_thin_lookup_result result;
- struct dm_bio_prison_cell cell1, cell2;
- struct dm_bio_prison_cell *cell_result;
+ struct dm_bio_prison_cell *virt_cell, *data_cell;
struct dm_cell_key key;
thin_hook_bio(tc, bio);
@@ -1932,7 +2287,7 @@
}
if (bio->bi_rw & (REQ_DISCARD | REQ_FLUSH | REQ_FUA)) {
- thin_defer_bio(tc, bio);
+ thin_defer_bio_with_throttle(tc, bio);
return DM_MAPIO_SUBMITTED;
}
@@ -1941,7 +2296,7 @@
* there's a race with discard.
*/
build_virtual_key(tc->td, block, &key);
- if (dm_bio_detain(tc->pool->prison, &key, bio, &cell1, &cell_result))
+ if (bio_detain(tc->pool, &key, bio, &virt_cell))
return DM_MAPIO_SUBMITTED;
r = dm_thin_find_block(td, block, 0, &result);
@@ -1966,20 +2321,19 @@
* More distant ancestors are irrelevant. The
* shared flag will be set in their case.
*/
- thin_defer_bio(tc, bio);
- cell_defer_no_holder_no_free(tc, &cell1);
+ thin_defer_cell(tc, virt_cell);
return DM_MAPIO_SUBMITTED;
}
build_data_key(tc->td, result.block, &key);
- if (dm_bio_detain(tc->pool->prison, &key, bio, &cell2, &cell_result)) {
- cell_defer_no_holder_no_free(tc, &cell1);
+ if (bio_detain(tc->pool, &key, bio, &data_cell)) {
+ cell_defer_no_holder(tc, virt_cell);
return DM_MAPIO_SUBMITTED;
}
inc_all_io_entry(tc->pool, bio);
- cell_defer_no_holder_no_free(tc, &cell2);
- cell_defer_no_holder_no_free(tc, &cell1);
+ cell_defer_no_holder(tc, data_cell);
+ cell_defer_no_holder(tc, virt_cell);
remap(tc, bio, result.block);
return DM_MAPIO_REMAPPED;
@@ -1991,18 +2345,13 @@
* of doing so.
*/
handle_unserviceable_bio(tc->pool, bio);
- cell_defer_no_holder_no_free(tc, &cell1);
+ cell_defer_no_holder(tc, virt_cell);
return DM_MAPIO_SUBMITTED;
}
/* fall through */
case -EWOULDBLOCK:
- /*
- * In future, the failed dm_thin_find_block above could
- * provide the hint to load the metadata into cache.
- */
- thin_defer_bio(tc, bio);
- cell_defer_no_holder_no_free(tc, &cell1);
+ thin_defer_cell(tc, virt_cell);
return DM_MAPIO_SUBMITTED;
default:
@@ -2012,7 +2361,7 @@
* pool is switched to fail-io mode.
*/
bio_io_error(bio);
- cell_defer_no_holder_no_free(tc, &cell1);
+ cell_defer_no_holder(tc, virt_cell);
return DM_MAPIO_SUBMITTED;
}
}
@@ -2193,7 +2542,7 @@
pool->sectors_per_block_shift = __ffs(block_size);
pool->low_water_blocks = 0;
pool_features_init(&pool->pf);
- pool->prison = dm_bio_prison_create(PRISON_CELLS);
+ pool->prison = dm_bio_prison_create();
if (!pool->prison) {
*error = "Error creating pool's bio prison";
err_p = ERR_PTR(-ENOMEM);
@@ -2219,6 +2568,7 @@
goto bad_wq;
}
+ throttle_init(&pool->throttle);
INIT_WORK(&pool->worker, do_worker);
INIT_DELAYED_WORK(&pool->waker, do_waker);
INIT_DELAYED_WORK(&pool->no_space_timeout, do_no_space_timeout);
@@ -2228,6 +2578,7 @@
INIT_LIST_HEAD(&pool->prepared_discards);
INIT_LIST_HEAD(&pool->active_thins);
pool->low_water_triggered = false;
+ pool->suspended = true;
pool->shared_read_ds = dm_deferred_set_create();
if (!pool->shared_read_ds) {
@@ -2764,20 +3115,77 @@
return 0;
}
+static void pool_suspend_active_thins(struct pool *pool)
+{
+ struct thin_c *tc;
+
+ /* Suspend all active thin devices */
+ tc = get_first_thin(pool);
+ while (tc) {
+ dm_internal_suspend_noflush(tc->thin_md);
+ tc = get_next_thin(pool, tc);
+ }
+}
+
+static void pool_resume_active_thins(struct pool *pool)
+{
+ struct thin_c *tc;
+
+ /* Resume all active thin devices */
+ tc = get_first_thin(pool);
+ while (tc) {
+ dm_internal_resume(tc->thin_md);
+ tc = get_next_thin(pool, tc);
+ }
+}
+
static void pool_resume(struct dm_target *ti)
{
struct pool_c *pt = ti->private;
struct pool *pool = pt->pool;
unsigned long flags;
+ /*
+ * Must requeue active_thins' bios and then resume
+ * active_thins _before_ clearing 'suspend' flag.
+ */
+ requeue_bios(pool);
+ pool_resume_active_thins(pool);
+
spin_lock_irqsave(&pool->lock, flags);
pool->low_water_triggered = false;
+ pool->suspended = false;
spin_unlock_irqrestore(&pool->lock, flags);
- requeue_bios(pool);
do_waker(&pool->waker.work);
}
+static void pool_presuspend(struct dm_target *ti)
+{
+ struct pool_c *pt = ti->private;
+ struct pool *pool = pt->pool;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pool->lock, flags);
+ pool->suspended = true;
+ spin_unlock_irqrestore(&pool->lock, flags);
+
+ pool_suspend_active_thins(pool);
+}
+
+static void pool_presuspend_undo(struct dm_target *ti)
+{
+ struct pool_c *pt = ti->private;
+ struct pool *pool = pt->pool;
+ unsigned long flags;
+
+ pool_resume_active_thins(pool);
+
+ spin_lock_irqsave(&pool->lock, flags);
+ pool->suspended = false;
+ spin_unlock_irqrestore(&pool->lock, flags);
+}
+
static void pool_postsuspend(struct dm_target *ti)
{
struct pool_c *pt = ti->private;
@@ -2949,7 +3357,6 @@
* create_thin <dev_id>
* create_snap <dev_id> <origin_id>
* delete <dev_id>
- * trim <dev_id> <new_size_in_sectors>
* set_transaction_id <current_trans_id> <new_trans_id>
* reserve_metadata_snap
* release_metadata_snap
@@ -3177,15 +3584,35 @@
{
struct pool_c *pt = ti->private;
struct pool *pool = pt->pool;
- uint64_t io_opt_sectors = limits->io_opt >> SECTOR_SHIFT;
+ sector_t io_opt_sectors = limits->io_opt >> SECTOR_SHIFT;
+
+ /*
+ * If max_sectors is smaller than pool->sectors_per_block adjust it
+ * to the highest possible power-of-2 factor of pool->sectors_per_block.
+ * This is especially beneficial when the pool's data device is a RAID
+ * device that has a full stripe width that matches pool->sectors_per_block
+ * -- because even though partial RAID stripe-sized IOs will be issued to a
+ * single RAID stripe; when aggregated they will end on a full RAID stripe
+ * boundary.. which avoids additional partial RAID stripe writes cascading
+ */
+ if (limits->max_sectors < pool->sectors_per_block) {
+ while (!is_factor(pool->sectors_per_block, limits->max_sectors)) {
+ if ((limits->max_sectors & (limits->max_sectors - 1)) == 0)
+ limits->max_sectors--;
+ limits->max_sectors = rounddown_pow_of_two(limits->max_sectors);
+ }
+ }
/*
* If the system-determined stacked limits are compatible with the
* pool's blocksize (io_opt is a factor) do not override them.
*/
if (io_opt_sectors < pool->sectors_per_block ||
- do_div(io_opt_sectors, pool->sectors_per_block)) {
- blk_limits_io_min(limits, pool->sectors_per_block << SECTOR_SHIFT);
+ !is_factor(io_opt_sectors, pool->sectors_per_block)) {
+ if (is_factor(pool->sectors_per_block, limits->max_sectors))
+ blk_limits_io_min(limits, limits->max_sectors << SECTOR_SHIFT);
+ else
+ blk_limits_io_min(limits, pool->sectors_per_block << SECTOR_SHIFT);
blk_limits_io_opt(limits, pool->sectors_per_block << SECTOR_SHIFT);
}
@@ -3214,11 +3641,13 @@
.name = "thin-pool",
.features = DM_TARGET_SINGLETON | DM_TARGET_ALWAYS_WRITEABLE |
DM_TARGET_IMMUTABLE,
- .version = {1, 13, 0},
+ .version = {1, 14, 0},
.module = THIS_MODULE,
.ctr = pool_ctr,
.dtr = pool_dtr,
.map = pool_map,
+ .presuspend = pool_presuspend,
+ .presuspend_undo = pool_presuspend_undo,
.postsuspend = pool_postsuspend,
.preresume = pool_preresume,
.resume = pool_resume,
@@ -3248,14 +3677,14 @@
struct thin_c *tc = ti->private;
unsigned long flags;
- thin_put(tc);
- wait_for_completion(&tc->can_destroy);
-
spin_lock_irqsave(&tc->pool->lock, flags);
list_del_rcu(&tc->list);
spin_unlock_irqrestore(&tc->pool->lock, flags);
synchronize_rcu();
+ thin_put(tc);
+ wait_for_completion(&tc->can_destroy);
+
mutex_lock(&dm_thin_pool_table.mutex);
__pool_dec(tc->pool);
@@ -3302,7 +3731,9 @@
r = -ENOMEM;
goto out_unlock;
}
+ tc->thin_md = dm_table_get_md(ti->table);
spin_lock_init(&tc->lock);
+ INIT_LIST_HEAD(&tc->deferred_cells);
bio_list_init(&tc->deferred_bio_list);
bio_list_init(&tc->retry_on_resume_list);
tc->sort_bio_list = RB_ROOT;
@@ -3347,18 +3778,18 @@
if (get_pool_mode(tc->pool) == PM_FAIL) {
ti->error = "Couldn't open thin device, Pool is in fail mode";
r = -EINVAL;
- goto bad_thin_open;
+ goto bad_pool;
}
r = dm_pool_open_thin_device(tc->pool->pmd, tc->dev_id, &tc->td);
if (r) {
ti->error = "Couldn't open thin internal device";
- goto bad_thin_open;
+ goto bad_pool;
}
r = dm_set_target_max_io_len(ti, tc->pool->sectors_per_block);
if (r)
- goto bad_target_max_io_len;
+ goto bad;
ti->num_flush_bios = 1;
ti->flush_supported = true;
@@ -3373,14 +3804,16 @@
ti->split_discard_bios = true;
}
- dm_put(pool_md);
-
mutex_unlock(&dm_thin_pool_table.mutex);
- atomic_set(&tc->refcount, 1);
- init_completion(&tc->can_destroy);
-
spin_lock_irqsave(&tc->pool->lock, flags);
+ if (tc->pool->suspended) {
+ spin_unlock_irqrestore(&tc->pool->lock, flags);
+ mutex_lock(&dm_thin_pool_table.mutex); /* reacquire for __pool_dec */
+ ti->error = "Unable to activate thin device while pool is suspended";
+ r = -EINVAL;
+ goto bad;
+ }
list_add_tail_rcu(&tc->list, &tc->pool->active_thins);
spin_unlock_irqrestore(&tc->pool->lock, flags);
/*
@@ -3391,11 +3824,16 @@
*/
synchronize_rcu();
+ dm_put(pool_md);
+
+ atomic_set(&tc->refcount, 1);
+ init_completion(&tc->can_destroy);
+
return 0;
-bad_target_max_io_len:
+bad:
dm_pool_close_thin_device(tc->td);
-bad_thin_open:
+bad_pool:
__pool_dec(tc->pool);
bad_pool_lookup:
dm_put(pool_md);
@@ -3541,6 +3979,21 @@
DMEMIT("Error");
}
+static int thin_merge(struct dm_target *ti, struct bvec_merge_data *bvm,
+ struct bio_vec *biovec, int max_size)
+{
+ struct thin_c *tc = ti->private;
+ struct request_queue *q = bdev_get_queue(tc->pool_dev->bdev);
+
+ if (!q->merge_bvec_fn)
+ return max_size;
+
+ bvm->bi_bdev = tc->pool_dev->bdev;
+ bvm->bi_sector = dm_target_offset(ti, bvm->bi_sector);
+
+ return min(max_size, q->merge_bvec_fn(q, bvm, biovec));
+}
+
static int thin_iterate_devices(struct dm_target *ti,
iterate_devices_callout_fn fn, void *data)
{
@@ -3565,7 +4018,7 @@
static struct target_type thin_target = {
.name = "thin",
- .version = {1, 13, 0},
+ .version = {1, 14, 0},
.module = THIS_MODULE,
.ctr = thin_ctr,
.dtr = thin_dtr,
@@ -3575,6 +4028,7 @@
.presuspend = thin_presuspend,
.postsuspend = thin_postsuspend,
.status = thin_status,
+ .merge = thin_merge,
.iterate_devices = thin_iterate_devices,
};
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 58f3927..8f37ed2 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -19,6 +19,7 @@
#include <linux/idr.h>
#include <linux/hdreg.h>
#include <linux/delay.h>
+#include <linux/wait.h>
#include <trace/events/block.h>
@@ -117,6 +118,7 @@
#define DMF_NOFLUSH_SUSPENDING 5
#define DMF_MERGE_IS_OPTIONAL 6
#define DMF_DEFERRED_REMOVE 7
+#define DMF_SUSPENDED_INTERNALLY 8
/*
* A dummy definition to make RCU happy.
@@ -140,7 +142,7 @@
* Use dm_get_live_table{_fast} or take suspend_lock for
* dereference.
*/
- struct dm_table *map;
+ struct dm_table __rcu *map;
struct list_head table_devices;
struct mutex table_devices_lock;
@@ -525,14 +527,15 @@
goto out;
tgt = dm_table_get_target(map, 0);
+ if (!tgt->type->ioctl)
+ goto out;
if (dm_suspended_md(md)) {
r = -EAGAIN;
goto out;
}
- if (tgt->type->ioctl)
- r = tgt->type->ioctl(tgt, cmd, arg);
+ r = tgt->type->ioctl(tgt, cmd, arg);
out:
dm_put_live_table(md, srcu_idx);
@@ -1607,9 +1610,9 @@
* Find maximum amount of I/O that won't need splitting
*/
max_sectors = min(max_io_len(bvm->bi_sector, ti),
- (sector_t) BIO_MAX_SECTORS);
+ (sector_t) queue_max_sectors(q));
max_size = (max_sectors << SECTOR_SHIFT) - bvm->bi_size;
- if (max_size < 0)
+ if (unlikely(max_size < 0)) /* this shouldn't _ever_ happen */
max_size = 0;
/*
@@ -1621,10 +1624,10 @@
max_size = ti->type->merge(ti, bvm, biovec, max_size);
/*
* If the target doesn't support merge method and some of the devices
- * provided their merge_bvec method (we know this by looking at
- * queue_max_hw_sectors), then we can't allow bios with multiple vector
- * entries. So always set max_size to 0, and the code below allows
- * just one page.
+ * provided their merge_bvec method (we know this by looking for the
+ * max_hw_sectors that dm_set_device_limits may set), then we can't
+ * allow bios with multiple vector entries. So always set max_size
+ * to 0, and the code below allows just one page.
*/
else if (queue_max_hw_sectors(q) <= PAGE_SIZE >> 9)
max_size = 0;
@@ -2332,7 +2335,7 @@
merge_is_optional = dm_table_merge_is_optional(t);
- old_map = md->map;
+ old_map = rcu_dereference_protected(md->map, lockdep_is_held(&md->suspend_lock));
rcu_assign_pointer(md->map, t);
md->immutable_target_type = dm_table_get_immutable_target_type(t);
@@ -2341,7 +2344,8 @@
set_bit(DMF_MERGE_IS_OPTIONAL, &md->flags);
else
clear_bit(DMF_MERGE_IS_OPTIONAL, &md->flags);
- dm_sync_table(md);
+ if (old_map)
+ dm_sync_table(md);
return old_map;
}
@@ -2351,7 +2355,7 @@
*/
static struct dm_table *__unbind(struct mapped_device *md)
{
- struct dm_table *map = md->map;
+ struct dm_table *map = rcu_dereference_protected(md->map, 1);
if (!map)
return NULL;
@@ -2716,6 +2720,99 @@
}
/*
+ * If __dm_suspend returns 0, the device is completely quiescent
+ * now. There is no request-processing activity. All new requests
+ * are being added to md->deferred list.
+ *
+ * Caller must hold md->suspend_lock
+ */
+static int __dm_suspend(struct mapped_device *md, struct dm_table *map,
+ unsigned suspend_flags, int interruptible)
+{
+ bool do_lockfs = suspend_flags & DM_SUSPEND_LOCKFS_FLAG;
+ bool noflush = suspend_flags & DM_SUSPEND_NOFLUSH_FLAG;
+ int r;
+
+ /*
+ * DMF_NOFLUSH_SUSPENDING must be set before presuspend.
+ * This flag is cleared before dm_suspend returns.
+ */
+ if (noflush)
+ set_bit(DMF_NOFLUSH_SUSPENDING, &md->flags);
+
+ /*
+ * This gets reverted if there's an error later and the targets
+ * provide the .presuspend_undo hook.
+ */
+ dm_table_presuspend_targets(map);
+
+ /*
+ * Flush I/O to the device.
+ * Any I/O submitted after lock_fs() may not be flushed.
+ * noflush takes precedence over do_lockfs.
+ * (lock_fs() flushes I/Os and waits for them to complete.)
+ */
+ if (!noflush && do_lockfs) {
+ r = lock_fs(md);
+ if (r) {
+ dm_table_presuspend_undo_targets(map);
+ return r;
+ }
+ }
+
+ /*
+ * Here we must make sure that no processes are submitting requests
+ * to target drivers i.e. no one may be executing
+ * __split_and_process_bio. This is called from dm_request and
+ * dm_wq_work.
+ *
+ * To get all processes out of __split_and_process_bio in dm_request,
+ * we take the write lock. To prevent any process from reentering
+ * __split_and_process_bio from dm_request and quiesce the thread
+ * (dm_wq_work), we set BMF_BLOCK_IO_FOR_SUSPEND and call
+ * flush_workqueue(md->wq).
+ */
+ set_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags);
+ if (map)
+ synchronize_srcu(&md->io_barrier);
+
+ /*
+ * Stop md->queue before flushing md->wq in case request-based
+ * dm defers requests to md->wq from md->queue.
+ */
+ if (dm_request_based(md))
+ stop_queue(md->queue);
+
+ flush_workqueue(md->wq);
+
+ /*
+ * At this point no more requests are entering target request routines.
+ * We call dm_wait_for_completion to wait for all existing requests
+ * to finish.
+ */
+ r = dm_wait_for_completion(md, interruptible);
+
+ if (noflush)
+ clear_bit(DMF_NOFLUSH_SUSPENDING, &md->flags);
+ if (map)
+ synchronize_srcu(&md->io_barrier);
+
+ /* were we interrupted ? */
+ if (r < 0) {
+ dm_queue_flush(md);
+
+ if (dm_request_based(md))
+ start_queue(md->queue);
+
+ unlock_fs(md);
+ dm_table_presuspend_undo_targets(map);
+ /* pushback list is already flushed, so skip flush */
+ }
+
+ return r;
+}
+
+/*
* We need to be able to change a mapping table under a mounted
* filesystem. For example we might want to move some data in
* the background. Before the table can be swapped with
@@ -2735,91 +2832,29 @@
{
struct dm_table *map = NULL;
int r = 0;
- int do_lockfs = suspend_flags & DM_SUSPEND_LOCKFS_FLAG ? 1 : 0;
- int noflush = suspend_flags & DM_SUSPEND_NOFLUSH_FLAG ? 1 : 0;
- mutex_lock(&md->suspend_lock);
+retry:
+ mutex_lock_nested(&md->suspend_lock, SINGLE_DEPTH_NESTING);
if (dm_suspended_md(md)) {
r = -EINVAL;
goto out_unlock;
}
- map = md->map;
-
- /*
- * DMF_NOFLUSH_SUSPENDING must be set before presuspend.
- * This flag is cleared before dm_suspend returns.
- */
- if (noflush)
- set_bit(DMF_NOFLUSH_SUSPENDING, &md->flags);
-
- /* This does not get reverted if there's an error later. */
- dm_table_presuspend_targets(map);
-
- /*
- * Flush I/O to the device.
- * Any I/O submitted after lock_fs() may not be flushed.
- * noflush takes precedence over do_lockfs.
- * (lock_fs() flushes I/Os and waits for them to complete.)
- */
- if (!noflush && do_lockfs) {
- r = lock_fs(md);
+ if (dm_suspended_internally_md(md)) {
+ /* already internally suspended, wait for internal resume */
+ mutex_unlock(&md->suspend_lock);
+ r = wait_on_bit(&md->flags, DMF_SUSPENDED_INTERNALLY, TASK_INTERRUPTIBLE);
if (r)
- goto out_unlock;
+ return r;
+ goto retry;
}
- /*
- * Here we must make sure that no processes are submitting requests
- * to target drivers i.e. no one may be executing
- * __split_and_process_bio. This is called from dm_request and
- * dm_wq_work.
- *
- * To get all processes out of __split_and_process_bio in dm_request,
- * we take the write lock. To prevent any process from reentering
- * __split_and_process_bio from dm_request and quiesce the thread
- * (dm_wq_work), we set BMF_BLOCK_IO_FOR_SUSPEND and call
- * flush_workqueue(md->wq).
- */
- set_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags);
- synchronize_srcu(&md->io_barrier);
+ map = rcu_dereference_protected(md->map, lockdep_is_held(&md->suspend_lock));
- /*
- * Stop md->queue before flushing md->wq in case request-based
- * dm defers requests to md->wq from md->queue.
- */
- if (dm_request_based(md))
- stop_queue(md->queue);
-
- flush_workqueue(md->wq);
-
- /*
- * At this point no more requests are entering target request routines.
- * We call dm_wait_for_completion to wait for all existing requests
- * to finish.
- */
- r = dm_wait_for_completion(md, TASK_INTERRUPTIBLE);
-
- if (noflush)
- clear_bit(DMF_NOFLUSH_SUSPENDING, &md->flags);
- synchronize_srcu(&md->io_barrier);
-
- /* were we interrupted ? */
- if (r < 0) {
- dm_queue_flush(md);
-
- if (dm_request_based(md))
- start_queue(md->queue);
-
- unlock_fs(md);
- goto out_unlock; /* pushback list is already flushed, so skip flush */
- }
-
- /*
- * If dm_wait_for_completion returned 0, the device is completely
- * quiescent now. There is no request-processing activity. All new
- * requests are being added to md->deferred list.
- */
+ r = __dm_suspend(md, map, suspend_flags, TASK_INTERRUPTIBLE);
+ if (r)
+ goto out_unlock;
set_bit(DMF_SUSPENDED, &md->flags);
@@ -2830,22 +2865,13 @@
return r;
}
-int dm_resume(struct mapped_device *md)
+static int __dm_resume(struct mapped_device *md, struct dm_table *map)
{
- int r = -EINVAL;
- struct dm_table *map = NULL;
-
- mutex_lock(&md->suspend_lock);
- if (!dm_suspended_md(md))
- goto out;
-
- map = md->map;
- if (!map || !dm_table_get_size(map))
- goto out;
-
- r = dm_table_resume_targets(map);
- if (r)
- goto out;
+ if (map) {
+ int r = dm_table_resume_targets(map);
+ if (r)
+ return r;
+ }
dm_queue_flush(md);
@@ -2859,6 +2885,37 @@
unlock_fs(md);
+ return 0;
+}
+
+int dm_resume(struct mapped_device *md)
+{
+ int r = -EINVAL;
+ struct dm_table *map = NULL;
+
+retry:
+ mutex_lock_nested(&md->suspend_lock, SINGLE_DEPTH_NESTING);
+
+ if (!dm_suspended_md(md))
+ goto out;
+
+ if (dm_suspended_internally_md(md)) {
+ /* already internally suspended, wait for internal resume */
+ mutex_unlock(&md->suspend_lock);
+ r = wait_on_bit(&md->flags, DMF_SUSPENDED_INTERNALLY, TASK_INTERRUPTIBLE);
+ if (r)
+ return r;
+ goto retry;
+ }
+
+ map = rcu_dereference_protected(md->map, lockdep_is_held(&md->suspend_lock));
+ if (!map || !dm_table_get_size(map))
+ goto out;
+
+ r = __dm_resume(md, map);
+ if (r)
+ goto out;
+
clear_bit(DMF_SUSPENDED, &md->flags);
r = 0;
@@ -2872,15 +2929,80 @@
* Internal suspend/resume works like userspace-driven suspend. It waits
* until all bios finish and prevents issuing new bios to the target drivers.
* It may be used only from the kernel.
- *
- * Internal suspend holds md->suspend_lock, which prevents interaction with
- * userspace-driven suspend.
*/
-void dm_internal_suspend(struct mapped_device *md)
+static void __dm_internal_suspend(struct mapped_device *md, unsigned suspend_flags)
+{
+ struct dm_table *map = NULL;
+
+ if (dm_suspended_internally_md(md))
+ return; /* nested internal suspend */
+
+ if (dm_suspended_md(md)) {
+ set_bit(DMF_SUSPENDED_INTERNALLY, &md->flags);
+ return; /* nest suspend */
+ }
+
+ map = rcu_dereference_protected(md->map, lockdep_is_held(&md->suspend_lock));
+
+ /*
+ * Using TASK_UNINTERRUPTIBLE because only NOFLUSH internal suspend is
+ * supported. Properly supporting a TASK_INTERRUPTIBLE internal suspend
+ * would require changing .presuspend to return an error -- avoid this
+ * until there is a need for more elaborate variants of internal suspend.
+ */
+ (void) __dm_suspend(md, map, suspend_flags, TASK_UNINTERRUPTIBLE);
+
+ set_bit(DMF_SUSPENDED_INTERNALLY, &md->flags);
+
+ dm_table_postsuspend_targets(map);
+}
+
+static void __dm_internal_resume(struct mapped_device *md)
+{
+ if (!dm_suspended_internally_md(md))
+ return; /* resume from nested internal suspend */
+
+ if (dm_suspended_md(md))
+ goto done; /* resume from nested suspend */
+
+ /*
+ * NOTE: existing callers don't need to call dm_table_resume_targets
+ * (which may fail -- so best to avoid it for now by passing NULL map)
+ */
+ (void) __dm_resume(md, NULL);
+
+done:
+ clear_bit(DMF_SUSPENDED_INTERNALLY, &md->flags);
+ smp_mb__after_atomic();
+ wake_up_bit(&md->flags, DMF_SUSPENDED_INTERNALLY);
+}
+
+void dm_internal_suspend_noflush(struct mapped_device *md)
{
mutex_lock(&md->suspend_lock);
- if (dm_suspended_md(md))
+ __dm_internal_suspend(md, DM_SUSPEND_NOFLUSH_FLAG);
+ mutex_unlock(&md->suspend_lock);
+}
+EXPORT_SYMBOL_GPL(dm_internal_suspend_noflush);
+
+void dm_internal_resume(struct mapped_device *md)
+{
+ mutex_lock(&md->suspend_lock);
+ __dm_internal_resume(md);
+ mutex_unlock(&md->suspend_lock);
+}
+EXPORT_SYMBOL_GPL(dm_internal_resume);
+
+/*
+ * Fast variants of internal suspend/resume hold md->suspend_lock,
+ * which prevents interaction with userspace-driven suspend.
+ */
+
+void dm_internal_suspend_fast(struct mapped_device *md)
+{
+ mutex_lock(&md->suspend_lock);
+ if (dm_suspended_md(md) || dm_suspended_internally_md(md))
return;
set_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags);
@@ -2889,9 +3011,9 @@
dm_wait_for_completion(md, TASK_UNINTERRUPTIBLE);
}
-void dm_internal_resume(struct mapped_device *md)
+void dm_internal_resume_fast(struct mapped_device *md)
{
- if (dm_suspended_md(md))
+ if (dm_suspended_md(md) || dm_suspended_internally_md(md))
goto done;
dm_queue_flush(md);
@@ -2977,6 +3099,11 @@
return test_bit(DMF_SUSPENDED, &md->flags);
}
+int dm_suspended_internally_md(struct mapped_device *md)
+{
+ return test_bit(DMF_SUSPENDED_INTERNALLY, &md->flags);
+}
+
int dm_test_deferred_remove_flag(struct mapped_device *md)
{
return test_bit(DMF_DEFERRED_REMOVE, &md->flags);
diff --git a/drivers/md/dm.h b/drivers/md/dm.h
index 988c7fb..84b0f9e4 100644
--- a/drivers/md/dm.h
+++ b/drivers/md/dm.h
@@ -65,6 +65,7 @@
struct queue_limits *limits);
struct list_head *dm_table_get_devices(struct dm_table *t);
void dm_table_presuspend_targets(struct dm_table *t);
+void dm_table_presuspend_undo_targets(struct dm_table *t);
void dm_table_postsuspend_targets(struct dm_table *t);
int dm_table_resume_targets(struct dm_table *t);
int dm_table_any_congested(struct dm_table *t, int bdi_bits);
@@ -129,6 +130,15 @@
int dm_suspended_md(struct mapped_device *md);
/*
+ * Internal suspend and resume methods.
+ */
+int dm_suspended_internally_md(struct mapped_device *md);
+void dm_internal_suspend_fast(struct mapped_device *md);
+void dm_internal_resume_fast(struct mapped_device *md);
+void dm_internal_suspend_noflush(struct mapped_device *md);
+void dm_internal_resume(struct mapped_device *md);
+
+/*
* Test if the device is scheduled for deferred remove.
*/
int dm_test_deferred_remove_flag(struct mapped_device *md);
diff --git a/drivers/md/persistent-data/dm-array.c b/drivers/md/persistent-data/dm-array.c
index 1d75b1d..e64b61a 100644
--- a/drivers/md/persistent-data/dm-array.c
+++ b/drivers/md/persistent-data/dm-array.c
@@ -645,8 +645,10 @@
int r;
struct resize resize;
- if (old_size == new_size)
+ if (old_size == new_size) {
+ *new_root = root;
return 0;
+ }
resize.info = info;
resize.root = root;
diff --git a/drivers/md/persistent-data/dm-space-map-metadata.c b/drivers/md/persistent-data/dm-space-map-metadata.c
index 786b689..e8a9042 100644
--- a/drivers/md/persistent-data/dm-space-map-metadata.c
+++ b/drivers/md/persistent-data/dm-space-map-metadata.c
@@ -564,7 +564,9 @@
{
struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
- return smm->ll.nr_blocks;
+ *count = smm->ll.nr_blocks;
+
+ return 0;
}
static int sm_bootstrap_get_nr_free(struct dm_space_map *sm, dm_block_t *count)
@@ -581,7 +583,9 @@
{
struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
- return b < smm->begin ? 1 : 0;
+ *result = (b < smm->begin) ? 1 : 0;
+
+ return 0;
}
static int sm_bootstrap_count_is_more_than_one(struct dm_space_map *sm,
diff --git a/drivers/md/persistent-data/dm-transaction-manager.c b/drivers/md/persistent-data/dm-transaction-manager.c
index 3bc30a0..9cb797d 100644
--- a/drivers/md/persistent-data/dm-transaction-manager.c
+++ b/drivers/md/persistent-data/dm-transaction-manager.c
@@ -10,6 +10,8 @@
#include "dm-persistent-data-internal.h"
#include <linux/export.h>
+#include <linux/mutex.h>
+#include <linux/hash.h>
#include <linux/slab.h>
#include <linux/device-mapper.h>
@@ -17,6 +19,61 @@
/*----------------------------------------------------------------*/
+#define PREFETCH_SIZE 128
+#define PREFETCH_BITS 7
+#define PREFETCH_SENTINEL ((dm_block_t) -1ULL)
+
+struct prefetch_set {
+ struct mutex lock;
+ dm_block_t blocks[PREFETCH_SIZE];
+};
+
+static unsigned prefetch_hash(dm_block_t b)
+{
+ return hash_64(b, PREFETCH_BITS);
+}
+
+static void prefetch_wipe(struct prefetch_set *p)
+{
+ unsigned i;
+ for (i = 0; i < PREFETCH_SIZE; i++)
+ p->blocks[i] = PREFETCH_SENTINEL;
+}
+
+static void prefetch_init(struct prefetch_set *p)
+{
+ mutex_init(&p->lock);
+ prefetch_wipe(p);
+}
+
+static void prefetch_add(struct prefetch_set *p, dm_block_t b)
+{
+ unsigned h = prefetch_hash(b);
+
+ mutex_lock(&p->lock);
+ if (p->blocks[h] == PREFETCH_SENTINEL)
+ p->blocks[h] = b;
+
+ mutex_unlock(&p->lock);
+}
+
+static void prefetch_issue(struct prefetch_set *p, struct dm_block_manager *bm)
+{
+ unsigned i;
+
+ mutex_lock(&p->lock);
+
+ for (i = 0; i < PREFETCH_SIZE; i++)
+ if (p->blocks[i] != PREFETCH_SENTINEL) {
+ dm_bm_prefetch(bm, p->blocks[i]);
+ p->blocks[i] = PREFETCH_SENTINEL;
+ }
+
+ mutex_unlock(&p->lock);
+}
+
+/*----------------------------------------------------------------*/
+
struct shadow_info {
struct hlist_node hlist;
dm_block_t where;
@@ -37,6 +94,8 @@
spinlock_t lock;
struct hlist_head buckets[DM_HASH_SIZE];
+
+ struct prefetch_set prefetches;
};
/*----------------------------------------------------------------*/
@@ -117,6 +176,8 @@
for (i = 0; i < DM_HASH_SIZE; i++)
INIT_HLIST_HEAD(tm->buckets + i);
+ prefetch_init(&tm->prefetches);
+
return tm;
}
@@ -268,8 +329,14 @@
struct dm_block_validator *v,
struct dm_block **blk)
{
- if (tm->is_clone)
- return dm_bm_read_try_lock(tm->real->bm, b, v, blk);
+ if (tm->is_clone) {
+ int r = dm_bm_read_try_lock(tm->real->bm, b, v, blk);
+
+ if (r == -EWOULDBLOCK)
+ prefetch_add(&tm->real->prefetches, b);
+
+ return r;
+ }
return dm_bm_read_lock(tm->bm, b, v, blk);
}
@@ -317,6 +384,12 @@
return tm->bm;
}
+void dm_tm_issue_prefetches(struct dm_transaction_manager *tm)
+{
+ prefetch_issue(&tm->prefetches, tm->bm);
+}
+EXPORT_SYMBOL_GPL(dm_tm_issue_prefetches);
+
/*----------------------------------------------------------------*/
static int dm_tm_create_internal(struct dm_block_manager *bm,
diff --git a/drivers/md/persistent-data/dm-transaction-manager.h b/drivers/md/persistent-data/dm-transaction-manager.h
index 2772ed2..2e0d4d6 100644
--- a/drivers/md/persistent-data/dm-transaction-manager.h
+++ b/drivers/md/persistent-data/dm-transaction-manager.h
@@ -109,6 +109,13 @@
struct dm_block_manager *dm_tm_get_bm(struct dm_transaction_manager *tm);
/*
+ * If you're using a non-blocking clone the tm will build up a list of
+ * requested blocks that weren't in core. This call will request those
+ * blocks to be prefetched.
+ */
+void dm_tm_issue_prefetches(struct dm_transaction_manager *tm);
+
+/*
* A little utility that ties the knot by producing a transaction manager
* that has a space map managed by the transaction manager...
*
diff --git a/drivers/media/i2c/smiapp/smiapp-core.c b/drivers/media/i2c/smiapp/smiapp-core.c
index 932ed9b..b10aaed 100644
--- a/drivers/media/i2c/smiapp/smiapp-core.c
+++ b/drivers/media/i2c/smiapp/smiapp-core.c
@@ -2190,7 +2190,7 @@
ret = smiapp_set_compose(subdev, fh, sel);
break;
default:
- BUG();
+ ret = -EINVAL;
}
mutex_unlock(&sensor->mutex);
diff --git a/drivers/media/pci/cx23885/cx23885-core.c b/drivers/media/pci/cx23885/cx23885-core.c
index 331edda..3bd386c 100644
--- a/drivers/media/pci/cx23885/cx23885-core.c
+++ b/drivers/media/pci/cx23885/cx23885-core.c
@@ -1078,7 +1078,7 @@
for (line = 0; line < lines; line++) {
while (offset && offset >= sg_dma_len(sg)) {
offset -= sg_dma_len(sg);
- sg++;
+ sg = sg_next(sg);
}
if (lpi && line > 0 && !(line % lpi))
@@ -1101,14 +1101,14 @@
*(rp++) = cpu_to_le32(0); /* bits 63-32 */
todo -= (sg_dma_len(sg)-offset);
offset = 0;
- sg++;
+ sg = sg_next(sg);
while (todo > sg_dma_len(sg)) {
*(rp++) = cpu_to_le32(RISC_WRITE|
sg_dma_len(sg));
*(rp++) = cpu_to_le32(sg_dma_address(sg));
*(rp++) = cpu_to_le32(0); /* bits 63-32 */
todo -= sg_dma_len(sg);
- sg++;
+ sg = sg_next(sg);
}
*(rp++) = cpu_to_le32(RISC_WRITE|RISC_EOL|todo);
*(rp++) = cpu_to_le32(sg_dma_address(sg));
diff --git a/drivers/media/pci/solo6x10/solo6x10-core.c b/drivers/media/pci/solo6x10/solo6x10-core.c
index 172583d..8cbe6b4 100644
--- a/drivers/media/pci/solo6x10/solo6x10-core.c
+++ b/drivers/media/pci/solo6x10/solo6x10-core.c
@@ -105,11 +105,8 @@
if (!status)
return IRQ_NONE;
- if (status & ~solo_dev->irq_mask) {
- solo_reg_write(solo_dev, SOLO_IRQ_STAT,
- status & ~solo_dev->irq_mask);
- status &= solo_dev->irq_mask;
- }
+ /* Acknowledge all interrupts immediately */
+ solo_reg_write(solo_dev, SOLO_IRQ_STAT, status);
if (status & SOLO_IRQ_PCI_ERR)
solo_p2m_error_isr(solo_dev);
@@ -132,9 +129,6 @@
if (status & SOLO_IRQ_G723)
solo_g723_isr(solo_dev);
- /* Clear all interrupts handled */
- solo_reg_write(solo_dev, SOLO_IRQ_STAT, status);
-
return IRQ_HANDLED;
}
diff --git a/drivers/media/rc/ir-rc6-decoder.c b/drivers/media/rc/ir-rc6-decoder.c
index f1f098e..d16bc67 100644
--- a/drivers/media/rc/ir-rc6-decoder.c
+++ b/drivers/media/rc/ir-rc6-decoder.c
@@ -259,8 +259,8 @@
case 32:
if ((scancode & RC6_6A_LCC_MASK) == RC6_6A_MCE_CC) {
protocol = RC_TYPE_RC6_MCE;
- scancode &= ~RC6_6A_MCE_TOGGLE_MASK;
toggle = !!(scancode & RC6_6A_MCE_TOGGLE_MASK);
+ scancode &= ~RC6_6A_MCE_TOGGLE_MASK;
} else {
protocol = RC_BIT_RC6_6A_32;
toggle = 0;
diff --git a/drivers/media/usb/s2255/s2255drv.c b/drivers/media/usb/s2255/s2255drv.c
index ccc0009..1c0dbf4 100644
--- a/drivers/media/usb/s2255/s2255drv.c
+++ b/drivers/media/usb/s2255/s2255drv.c
@@ -632,7 +632,7 @@
break;
case V4L2_PIX_FMT_JPEG:
case V4L2_PIX_FMT_MJPEG:
- buf->vb.v4l2_buf.length = jpgsize;
+ vb2_set_plane_payload(&buf->vb, 0, jpgsize);
memcpy(vbuf, tmpbuf, jpgsize);
break;
case V4L2_PIX_FMT_YUV422P:
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 1456ea7..2e6b731 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -59,6 +59,17 @@
additional drivers must be enabled in order to use the
functionality of the device.
+config MFD_ATMEL_HLCDC
+ tristate "Atmel HLCDC (High-end LCD Controller)"
+ select MFD_CORE
+ select REGMAP_MMIO
+ depends on OF
+ help
+ If you say yes here you get support for the HLCDC block.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
+
config MFD_BCM590XX
tristate "Broadcom BCM590xx PMUs"
select MFD_CORE
@@ -74,7 +85,8 @@
select REGMAP_IRQ
depends on I2C=y
help
- If you say Y here you get support for the X-Powers AXP202 and AXP209.
+ If you say Y here you get support for the X-Powers AXP202, AXP209 and
+ AXP288 power management IC (PMIC).
This driver include only the core APIs. You have to select individual
components like regulators or the PEK (Power Enable Key) under the
corresponding menus.
@@ -183,6 +195,16 @@
Additional drivers must be enabled in order to use the functionality
of the device.
+config MFD_DLN2
+ tristate "Diolan DLN2 support"
+ select MFD_CORE
+ depends on USB
+ help
+ This adds support for Diolan USB-I2C/SPI/GPIO Master Adapter
+ DLN-2. Additional drivers such as I2C_DLN2, GPIO_DLN2,
+ etc. must be enabled in order to use the functionality of
+ the device.
+
config MFD_MC13XXX
tristate
depends on (SPI_MASTER || I2C)
@@ -655,7 +677,6 @@
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
- select REGULATOR
help
Support for the Samsung Electronics MFD series.
This driver provides common support for accessing the device,
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 8bd54b1..53467e2 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -13,7 +13,7 @@
obj-$(CONFIG_MFD_CROS_EC_I2C) += cros_ec_i2c.o
obj-$(CONFIG_MFD_CROS_EC_SPI) += cros_ec_spi.o
-rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o
+rtsx_pci-objs := rtsx_pcr.o rtsx_gops.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o
obj-$(CONFIG_MFD_RTSX_PCI) += rtsx_pci.o
obj-$(CONFIG_MFD_RTSX_USB) += rtsx_usb.o
@@ -157,6 +157,7 @@
obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
obj-$(CONFIG_MFD_TPS65090) += tps65090.o
obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
+obj-$(CONFIG_MFD_ATMEL_HLCDC) += atmel-hlcdc.o
obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
obj-$(CONFIG_MFD_PALMAS) += palmas.o
obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o
@@ -174,6 +175,7 @@
obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o
obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o
obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o
+obj-$(CONFIG_MFD_DLN2) += dln2.o
intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c
index 8e0dae5..94dbcdd 100644
--- a/drivers/mfd/ab8500-sysctrl.c
+++ b/drivers/mfd/ab8500-sysctrl.c
@@ -85,63 +85,6 @@
}
}
-/*
- * Use the AB WD to reset the platform. It will perform a hard
- * reset instead of a soft reset. Write the reset reason to
- * the AB before reset, which can be read upon restart.
- */
-void ab8500_restart(char mode, const char *cmd)
-{
- struct ab8500_platform_data *plat;
- struct ab8500_sysctrl_platform_data *pdata;
- u16 reason = 0;
- u8 val;
-
- if (sysctrl_dev == NULL) {
- pr_err("%s: sysctrl not initialized\n", __func__);
- return;
- }
-
- plat = dev_get_platdata(sysctrl_dev->parent);
- pdata = plat->sysctrl;
- if (pdata && pdata->reboot_reason_code)
- reason = pdata->reboot_reason_code(cmd);
- else
- pr_warn("[%s] No reboot reason set. Default reason %d\n",
- __func__, reason);
-
- /*
- * Disable RTC alarm, just a precaution so that no alarm
- * is running when WD reset is executed.
- */
- abx500_get_register_interruptible(sysctrl_dev, AB8500_RTC,
- RTC_CTRL , &val);
- abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
- RTC_CTRL , (val & ~RTC_ALARM_ENABLE));
-
- /*
- * Android is not using the RTC alarm registers during reboot
- * so we borrow them for writing the reason of reset
- */
-
- /* reason[8 LSB] */
- val = reason & 0xFF;
- abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
- AB8500_ALARM_MIN_LOW , val);
-
- /* reason[8 MSB] */
- val = (reason>>8) & 0xFF;
- abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
- AB8500_ALARM_MIN_MID , val);
-
- /* Setting WD timeout to 0 */
- ab8500_sysctrl_write(AB8500_MAINWDOGTIMER, 0xFF, 0x0);
-
- /* Setting the parameters to AB8500 WD*/
- ab8500_sysctrl_write(AB8500_MAINWDOGCTRL, 0xFF, (AB8500_ENABLE_WD |
- AB8500_WD_RESTART_ON_EXPIRE | AB8500_KICK_WD));
-}
-
static inline bool valid_bank(u8 bank)
{
return ((bank == AB8500_SYS_CTRL1_BLOCK) ||
diff --git a/drivers/mfd/arizona-spi.c b/drivers/mfd/arizona-spi.c
index 5145d78..8ef58bc 100644
--- a/drivers/mfd/arizona-spi.c
+++ b/drivers/mfd/arizona-spi.c
@@ -75,7 +75,9 @@
static int arizona_spi_remove(struct spi_device *spi)
{
struct arizona *arizona = spi_get_drvdata(spi);
+
arizona_dev_exit(arizona);
+
return 0;
}
diff --git a/drivers/mfd/atmel-hlcdc.c b/drivers/mfd/atmel-hlcdc.c
new file mode 100644
index 0000000..cfd58f4
--- /dev/null
+++ b/drivers/mfd/atmel-hlcdc.c
@@ -0,0 +1,122 @@
+/*
+ * Copyright (C) 2014 Free Electrons
+ * Copyright (C) 2014 Atmel
+ *
+ * Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/mfd/atmel-hlcdc.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define ATMEL_HLCDC_REG_MAX (0x4000 - 0x4)
+
+static const struct mfd_cell atmel_hlcdc_cells[] = {
+ {
+ .name = "atmel-hlcdc-pwm",
+ .of_compatible = "atmel,hlcdc-pwm",
+ },
+ {
+ .name = "atmel-hlcdc-dc",
+ .of_compatible = "atmel,hlcdc-display-controller",
+ },
+};
+
+static const struct regmap_config atmel_hlcdc_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = ATMEL_HLCDC_REG_MAX,
+};
+
+static int atmel_hlcdc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct atmel_hlcdc *hlcdc;
+ struct resource *res;
+ void __iomem *regs;
+
+ hlcdc = devm_kzalloc(dev, sizeof(*hlcdc), GFP_KERNEL);
+ if (!hlcdc)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(regs))
+ return PTR_ERR(regs);
+
+ hlcdc->irq = platform_get_irq(pdev, 0);
+ if (hlcdc->irq < 0)
+ return hlcdc->irq;
+
+ hlcdc->periph_clk = devm_clk_get(dev, "periph_clk");
+ if (IS_ERR(hlcdc->periph_clk)) {
+ dev_err(dev, "failed to get peripheral clock\n");
+ return PTR_ERR(hlcdc->periph_clk);
+ }
+
+ hlcdc->sys_clk = devm_clk_get(dev, "sys_clk");
+ if (IS_ERR(hlcdc->sys_clk)) {
+ dev_err(dev, "failed to get system clock\n");
+ return PTR_ERR(hlcdc->sys_clk);
+ }
+
+ hlcdc->slow_clk = devm_clk_get(dev, "slow_clk");
+ if (IS_ERR(hlcdc->slow_clk)) {
+ dev_err(dev, "failed to get slow clock\n");
+ return PTR_ERR(hlcdc->slow_clk);
+ }
+
+ hlcdc->regmap = devm_regmap_init_mmio(dev, regs,
+ &atmel_hlcdc_regmap_config);
+ if (IS_ERR(hlcdc->regmap))
+ return PTR_ERR(hlcdc->regmap);
+
+ dev_set_drvdata(dev, hlcdc);
+
+ return mfd_add_devices(dev, -1, atmel_hlcdc_cells,
+ ARRAY_SIZE(atmel_hlcdc_cells),
+ NULL, 0, NULL);
+}
+
+static int atmel_hlcdc_remove(struct platform_device *pdev)
+{
+ mfd_remove_devices(&pdev->dev);
+
+ return 0;
+}
+
+static const struct of_device_id atmel_hlcdc_match[] = {
+ { .compatible = "atmel,sama5d3-hlcdc" },
+ { /* sentinel */ },
+};
+
+static struct platform_driver atmel_hlcdc_driver = {
+ .probe = atmel_hlcdc_probe,
+ .remove = atmel_hlcdc_remove,
+ .driver = {
+ .name = "atmel-hlcdc",
+ .of_match_table = atmel_hlcdc_match,
+ },
+};
+module_platform_driver(atmel_hlcdc_driver);
+
+MODULE_ALIAS("platform:atmel-hlcdc");
+MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>");
+MODULE_DESCRIPTION("Atmel HLCDC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index 6231adb..c522ee2 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -1,9 +1,9 @@
/*
- * axp20x.c - MFD core driver for the X-Powers AXP202 and AXP209
+ * axp20x.c - MFD core driver for the X-Powers' Power Management ICs
*
- * AXP20x comprises an adaptive USB-Compatible PWM charger, 2 BUCK DC-DC
- * converters, 5 LDOs, multiple 12-bit ADCs of voltage, current and temperature
- * as well as 4 configurable GPIOs.
+ * AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC
+ * converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature
+ * as well as configurable GPIOs.
*
* Author: Carlo Caione <carlo@caione.org>
*
@@ -25,9 +25,16 @@
#include <linux/mfd/core.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
+#include <linux/acpi.h>
#define AXP20X_OFF 0x80
+static const char const *axp20x_model_names[] = {
+ "AXP202",
+ "AXP209",
+ "AXP288",
+};
+
static const struct regmap_range axp20x_writeable_ranges[] = {
regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES),
@@ -47,6 +54,25 @@
.n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges),
};
+static const struct regmap_range axp288_writeable_ranges[] = {
+ regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ6_STATE),
+ regmap_reg_range(AXP20X_DCDC_MODE, AXP288_FG_TUNE5),
+};
+
+static const struct regmap_range axp288_volatile_ranges[] = {
+ regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IPSOUT_V_HIGH_L),
+};
+
+static const struct regmap_access_table axp288_writeable_table = {
+ .yes_ranges = axp288_writeable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(axp288_writeable_ranges),
+};
+
+static const struct regmap_access_table axp288_volatile_table = {
+ .yes_ranges = axp288_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(axp288_volatile_ranges),
+};
+
static struct resource axp20x_pek_resources[] = {
{
.name = "PEK_DBR",
@@ -61,6 +87,39 @@
},
};
+static struct resource axp288_battery_resources[] = {
+ {
+ .start = AXP288_IRQ_QWBTU,
+ .end = AXP288_IRQ_QWBTU,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_WBTU,
+ .end = AXP288_IRQ_WBTU,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_QWBTO,
+ .end = AXP288_IRQ_QWBTO,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_WBTO,
+ .end = AXP288_IRQ_WBTO,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_WL2,
+ .end = AXP288_IRQ_WL2,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_WL1,
+ .end = AXP288_IRQ_WL1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static const struct regmap_config axp20x_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -70,47 +129,96 @@
.cache_type = REGCACHE_RBTREE,
};
-#define AXP20X_IRQ(_irq, _off, _mask) \
- [AXP20X_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }
+static const struct regmap_config axp288_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .wr_table = &axp288_writeable_table,
+ .volatile_table = &axp288_volatile_table,
+ .max_register = AXP288_FG_TUNE5,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+#define INIT_REGMAP_IRQ(_variant, _irq, _off, _mask) \
+ [_variant##_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }
static const struct regmap_irq axp20x_regmap_irqs[] = {
- AXP20X_IRQ(ACIN_OVER_V, 0, 7),
- AXP20X_IRQ(ACIN_PLUGIN, 0, 6),
- AXP20X_IRQ(ACIN_REMOVAL, 0, 5),
- AXP20X_IRQ(VBUS_OVER_V, 0, 4),
- AXP20X_IRQ(VBUS_PLUGIN, 0, 3),
- AXP20X_IRQ(VBUS_REMOVAL, 0, 2),
- AXP20X_IRQ(VBUS_V_LOW, 0, 1),
- AXP20X_IRQ(BATT_PLUGIN, 1, 7),
- AXP20X_IRQ(BATT_REMOVAL, 1, 6),
- AXP20X_IRQ(BATT_ENT_ACT_MODE, 1, 5),
- AXP20X_IRQ(BATT_EXIT_ACT_MODE, 1, 4),
- AXP20X_IRQ(CHARG, 1, 3),
- AXP20X_IRQ(CHARG_DONE, 1, 2),
- AXP20X_IRQ(BATT_TEMP_HIGH, 1, 1),
- AXP20X_IRQ(BATT_TEMP_LOW, 1, 0),
- AXP20X_IRQ(DIE_TEMP_HIGH, 2, 7),
- AXP20X_IRQ(CHARG_I_LOW, 2, 6),
- AXP20X_IRQ(DCDC1_V_LONG, 2, 5),
- AXP20X_IRQ(DCDC2_V_LONG, 2, 4),
- AXP20X_IRQ(DCDC3_V_LONG, 2, 3),
- AXP20X_IRQ(PEK_SHORT, 2, 1),
- AXP20X_IRQ(PEK_LONG, 2, 0),
- AXP20X_IRQ(N_OE_PWR_ON, 3, 7),
- AXP20X_IRQ(N_OE_PWR_OFF, 3, 6),
- AXP20X_IRQ(VBUS_VALID, 3, 5),
- AXP20X_IRQ(VBUS_NOT_VALID, 3, 4),
- AXP20X_IRQ(VBUS_SESS_VALID, 3, 3),
- AXP20X_IRQ(VBUS_SESS_END, 3, 2),
- AXP20X_IRQ(LOW_PWR_LVL1, 3, 1),
- AXP20X_IRQ(LOW_PWR_LVL2, 3, 0),
- AXP20X_IRQ(TIMER, 4, 7),
- AXP20X_IRQ(PEK_RIS_EDGE, 4, 6),
- AXP20X_IRQ(PEK_FAL_EDGE, 4, 5),
- AXP20X_IRQ(GPIO3_INPUT, 4, 3),
- AXP20X_IRQ(GPIO2_INPUT, 4, 2),
- AXP20X_IRQ(GPIO1_INPUT, 4, 1),
- AXP20X_IRQ(GPIO0_INPUT, 4, 0),
+ INIT_REGMAP_IRQ(AXP20X, ACIN_OVER_V, 0, 7),
+ INIT_REGMAP_IRQ(AXP20X, ACIN_PLUGIN, 0, 6),
+ INIT_REGMAP_IRQ(AXP20X, ACIN_REMOVAL, 0, 5),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_OVER_V, 0, 4),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_PLUGIN, 0, 3),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_REMOVAL, 0, 2),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_V_LOW, 0, 1),
+ INIT_REGMAP_IRQ(AXP20X, BATT_PLUGIN, 1, 7),
+ INIT_REGMAP_IRQ(AXP20X, BATT_REMOVAL, 1, 6),
+ INIT_REGMAP_IRQ(AXP20X, BATT_ENT_ACT_MODE, 1, 5),
+ INIT_REGMAP_IRQ(AXP20X, BATT_EXIT_ACT_MODE, 1, 4),
+ INIT_REGMAP_IRQ(AXP20X, CHARG, 1, 3),
+ INIT_REGMAP_IRQ(AXP20X, CHARG_DONE, 1, 2),
+ INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_HIGH, 1, 1),
+ INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_LOW, 1, 0),
+ INIT_REGMAP_IRQ(AXP20X, DIE_TEMP_HIGH, 2, 7),
+ INIT_REGMAP_IRQ(AXP20X, CHARG_I_LOW, 2, 6),
+ INIT_REGMAP_IRQ(AXP20X, DCDC1_V_LONG, 2, 5),
+ INIT_REGMAP_IRQ(AXP20X, DCDC2_V_LONG, 2, 4),
+ INIT_REGMAP_IRQ(AXP20X, DCDC3_V_LONG, 2, 3),
+ INIT_REGMAP_IRQ(AXP20X, PEK_SHORT, 2, 1),
+ INIT_REGMAP_IRQ(AXP20X, PEK_LONG, 2, 0),
+ INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_ON, 3, 7),
+ INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_OFF, 3, 6),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_VALID, 3, 5),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_NOT_VALID, 3, 4),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_VALID, 3, 3),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_END, 3, 2),
+ INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL1, 3, 1),
+ INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL2, 3, 0),
+ INIT_REGMAP_IRQ(AXP20X, TIMER, 4, 7),
+ INIT_REGMAP_IRQ(AXP20X, PEK_RIS_EDGE, 4, 6),
+ INIT_REGMAP_IRQ(AXP20X, PEK_FAL_EDGE, 4, 5),
+ INIT_REGMAP_IRQ(AXP20X, GPIO3_INPUT, 4, 3),
+ INIT_REGMAP_IRQ(AXP20X, GPIO2_INPUT, 4, 2),
+ INIT_REGMAP_IRQ(AXP20X, GPIO1_INPUT, 4, 1),
+ INIT_REGMAP_IRQ(AXP20X, GPIO0_INPUT, 4, 0),
+};
+
+/* some IRQs are compatible with axp20x models */
+static const struct regmap_irq axp288_regmap_irqs[] = {
+ INIT_REGMAP_IRQ(AXP288, VBUS_FALL, 0, 2),
+ INIT_REGMAP_IRQ(AXP288, VBUS_RISE, 0, 3),
+ INIT_REGMAP_IRQ(AXP288, OV, 0, 4),
+
+ INIT_REGMAP_IRQ(AXP288, DONE, 1, 2),
+ INIT_REGMAP_IRQ(AXP288, CHARGING, 1, 3),
+ INIT_REGMAP_IRQ(AXP288, SAFE_QUIT, 1, 4),
+ INIT_REGMAP_IRQ(AXP288, SAFE_ENTER, 1, 5),
+ INIT_REGMAP_IRQ(AXP288, ABSENT, 1, 6),
+ INIT_REGMAP_IRQ(AXP288, APPEND, 1, 7),
+
+ INIT_REGMAP_IRQ(AXP288, QWBTU, 2, 0),
+ INIT_REGMAP_IRQ(AXP288, WBTU, 2, 1),
+ INIT_REGMAP_IRQ(AXP288, QWBTO, 2, 2),
+ INIT_REGMAP_IRQ(AXP288, WBTO, 2, 3),
+ INIT_REGMAP_IRQ(AXP288, QCBTU, 2, 4),
+ INIT_REGMAP_IRQ(AXP288, CBTU, 2, 5),
+ INIT_REGMAP_IRQ(AXP288, QCBTO, 2, 6),
+ INIT_REGMAP_IRQ(AXP288, CBTO, 2, 7),
+
+ INIT_REGMAP_IRQ(AXP288, WL2, 3, 0),
+ INIT_REGMAP_IRQ(AXP288, WL1, 3, 1),
+ INIT_REGMAP_IRQ(AXP288, GPADC, 3, 2),
+ INIT_REGMAP_IRQ(AXP288, OT, 3, 7),
+
+ INIT_REGMAP_IRQ(AXP288, GPIO0, 4, 0),
+ INIT_REGMAP_IRQ(AXP288, GPIO1, 4, 1),
+ INIT_REGMAP_IRQ(AXP288, POKO, 4, 2),
+ INIT_REGMAP_IRQ(AXP288, POKL, 4, 3),
+ INIT_REGMAP_IRQ(AXP288, POKS, 4, 4),
+ INIT_REGMAP_IRQ(AXP288, POKN, 4, 5),
+ INIT_REGMAP_IRQ(AXP288, POKP, 4, 6),
+ INIT_REGMAP_IRQ(AXP288, TIMER, 4, 7),
+
+ INIT_REGMAP_IRQ(AXP288, MV_CHNG, 5, 0),
+ INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG, 5, 1),
};
static const struct of_device_id axp20x_of_match[] = {
@@ -128,16 +236,39 @@
};
MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id);
+static const struct acpi_device_id axp20x_acpi_match[] = {
+ {
+ .id = "INT33F4",
+ .driver_data = AXP288_ID,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, axp20x_acpi_match);
+
static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
.name = "axp20x_irq_chip",
.status_base = AXP20X_IRQ1_STATE,
.ack_base = AXP20X_IRQ1_STATE,
.mask_base = AXP20X_IRQ1_EN,
- .num_regs = 5,
- .irqs = axp20x_regmap_irqs,
- .num_irqs = ARRAY_SIZE(axp20x_regmap_irqs),
.mask_invert = true,
.init_ack_masked = true,
+ .irqs = axp20x_regmap_irqs,
+ .num_irqs = ARRAY_SIZE(axp20x_regmap_irqs),
+ .num_regs = 5,
+
+};
+
+static const struct regmap_irq_chip axp288_regmap_irq_chip = {
+ .name = "axp288_irq_chip",
+ .status_base = AXP20X_IRQ1_STATE,
+ .ack_base = AXP20X_IRQ1_STATE,
+ .mask_base = AXP20X_IRQ1_EN,
+ .mask_invert = true,
+ .init_ack_masked = true,
+ .irqs = axp288_regmap_irqs,
+ .num_irqs = ARRAY_SIZE(axp288_regmap_irqs),
+ .num_regs = 6,
+
};
static struct mfd_cell axp20x_cells[] = {
@@ -150,36 +281,155 @@
},
};
+static struct resource axp288_adc_resources[] = {
+ {
+ .name = "GPADC",
+ .start = AXP288_IRQ_GPADC,
+ .end = AXP288_IRQ_GPADC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource axp288_charger_resources[] = {
+ {
+ .start = AXP288_IRQ_OV,
+ .end = AXP288_IRQ_OV,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_DONE,
+ .end = AXP288_IRQ_DONE,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_CHARGING,
+ .end = AXP288_IRQ_CHARGING,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_SAFE_QUIT,
+ .end = AXP288_IRQ_SAFE_QUIT,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_SAFE_ENTER,
+ .end = AXP288_IRQ_SAFE_ENTER,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_QCBTU,
+ .end = AXP288_IRQ_QCBTU,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_CBTU,
+ .end = AXP288_IRQ_CBTU,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_QCBTO,
+ .end = AXP288_IRQ_QCBTO,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_CBTO,
+ .end = AXP288_IRQ_CBTO,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mfd_cell axp288_cells[] = {
+ {
+ .name = "axp288_adc",
+ .num_resources = ARRAY_SIZE(axp288_adc_resources),
+ .resources = axp288_adc_resources,
+ },
+ {
+ .name = "axp288_charger",
+ .num_resources = ARRAY_SIZE(axp288_charger_resources),
+ .resources = axp288_charger_resources,
+ },
+ {
+ .name = "axp288_battery",
+ .num_resources = ARRAY_SIZE(axp288_battery_resources),
+ .resources = axp288_battery_resources,
+ },
+};
+
static struct axp20x_dev *axp20x_pm_power_off;
static void axp20x_power_off(void)
{
+ if (axp20x_pm_power_off->variant == AXP288_ID)
+ return;
+
regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL,
AXP20X_OFF);
}
+static int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev)
+{
+ const struct acpi_device_id *acpi_id;
+ const struct of_device_id *of_id;
+
+ if (dev->of_node) {
+ of_id = of_match_device(axp20x_of_match, dev);
+ if (!of_id) {
+ dev_err(dev, "Unable to match OF ID\n");
+ return -ENODEV;
+ }
+ axp20x->variant = (long) of_id->data;
+ } else {
+ acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev);
+ if (!acpi_id || !acpi_id->driver_data) {
+ dev_err(dev, "Unable to match ACPI ID and data\n");
+ return -ENODEV;
+ }
+ axp20x->variant = (long) acpi_id->driver_data;
+ }
+
+ switch (axp20x->variant) {
+ case AXP202_ID:
+ case AXP209_ID:
+ axp20x->nr_cells = ARRAY_SIZE(axp20x_cells);
+ axp20x->cells = axp20x_cells;
+ axp20x->regmap_cfg = &axp20x_regmap_config;
+ axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip;
+ break;
+ case AXP288_ID:
+ axp20x->cells = axp288_cells;
+ axp20x->nr_cells = ARRAY_SIZE(axp288_cells);
+ axp20x->regmap_cfg = &axp288_regmap_config;
+ axp20x->regmap_irq_chip = &axp288_regmap_irq_chip;
+ break;
+ default:
+ dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant);
+ return -EINVAL;
+ }
+ dev_info(dev, "AXP20x variant %s found\n",
+ axp20x_model_names[axp20x->variant]);
+
+ return 0;
+}
+
static int axp20x_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct axp20x_dev *axp20x;
- const struct of_device_id *of_id;
int ret;
axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL);
if (!axp20x)
return -ENOMEM;
- of_id = of_match_device(axp20x_of_match, &i2c->dev);
- if (!of_id) {
- dev_err(&i2c->dev, "Unable to setup AXP20X data\n");
- return -ENODEV;
- }
- axp20x->variant = (long) of_id->data;
+ ret = axp20x_match_device(axp20x, &i2c->dev);
+ if (ret)
+ return ret;
axp20x->i2c_client = i2c;
axp20x->dev = &i2c->dev;
dev_set_drvdata(axp20x->dev, axp20x);
- axp20x->regmap = devm_regmap_init_i2c(i2c, &axp20x_regmap_config);
+ axp20x->regmap = devm_regmap_init_i2c(i2c, axp20x->regmap_cfg);
if (IS_ERR(axp20x->regmap)) {
ret = PTR_ERR(axp20x->regmap);
dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
@@ -188,15 +438,15 @@
ret = regmap_add_irq_chip(axp20x->regmap, i2c->irq,
IRQF_ONESHOT | IRQF_SHARED, -1,
- &axp20x_regmap_irq_chip,
+ axp20x->regmap_irq_chip,
&axp20x->regmap_irqc);
if (ret) {
dev_err(&i2c->dev, "failed to add irq chip: %d\n", ret);
return ret;
}
- ret = mfd_add_devices(axp20x->dev, -1, axp20x_cells,
- ARRAY_SIZE(axp20x_cells), NULL, 0, NULL);
+ ret = mfd_add_devices(axp20x->dev, -1, axp20x->cells,
+ axp20x->nr_cells, NULL, 0, NULL);
if (ret) {
dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret);
@@ -234,6 +484,7 @@
.name = "axp20x",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(axp20x_of_match),
+ .acpi_match_table = ACPI_PTR(axp20x_acpi_match),
},
.probe = axp20x_i2c_probe,
.remove = axp20x_i2c_remove,
diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c
index 93db8bb..f38bc98 100644
--- a/drivers/mfd/da9063-core.c
+++ b/drivers/mfd/da9063-core.c
@@ -118,7 +118,7 @@
da9063->irq_base = pdata->irq_base;
} else {
da9063->flags = 0;
- da9063->irq_base = 0;
+ da9063->irq_base = -1;
}
da9063->chip_irq = irq;
@@ -168,6 +168,8 @@
return ret;
}
+ da9063->irq_base = regmap_irq_chip_get_base(da9063->regmap_irq);
+
ret = mfd_add_devices(da9063->dev, -1, da9063_devs,
ARRAY_SIZE(da9063_devs), NULL, da9063->irq_base,
NULL);
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 193cf16..a820473 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -3150,23 +3150,28 @@
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu");
if (!res) {
dev_err(&pdev->dev, "no prcmu memory region provided\n");
- return -ENOENT;
+ return -EINVAL;
}
prcmu_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
if (!prcmu_base) {
dev_err(&pdev->dev,
"failed to ioremap prcmu register memory\n");
- return -ENOENT;
+ return -ENOMEM;
}
init_prcm_registers();
dbx500_fw_version_init(pdev, pdata->version_offset);
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu-tcdm");
if (!res) {
dev_err(&pdev->dev, "no prcmu tcdm region provided\n");
- return -ENOENT;
+ return -EINVAL;
}
tcdm_base = devm_ioremap(&pdev->dev, res->start,
resource_size(res));
+ if (!tcdm_base) {
+ dev_err(&pdev->dev,
+ "failed to ioremap prcmu-tcdm register memory\n");
+ return -ENOMEM;
+ }
/* Clean up the mailbox interrupts after pre-kernel code. */
writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR);
@@ -3174,15 +3179,14 @@
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
dev_err(&pdev->dev, "no prcmu irq provided\n");
- return -ENOENT;
+ return irq;
}
err = request_threaded_irq(irq, prcmu_irq_handler,
prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL);
if (err < 0) {
pr_err("prcmu: Failed to allocate IRQ_DB8500_PRCMU1.\n");
- err = -EBUSY;
- goto no_irq_return;
+ return err;
}
db8500_irq_init(np);
@@ -3206,7 +3210,7 @@
if (err) {
mfd_remove_devices(&pdev->dev);
pr_err("prcmu: Failed to add subdevices\n");
- goto no_irq_return;
+ return err;
}
}
@@ -3214,12 +3218,10 @@
if (err) {
mfd_remove_devices(&pdev->dev);
pr_err("prcmu: Failed to add ab8500 subdevice\n");
- goto no_irq_return;
+ return err;
}
pr_info("DB8500 PRCMU initialized\n");
-
-no_irq_return:
return err;
}
static const struct of_device_id db8500_prcmu_match[] = {
diff --git a/drivers/mfd/dln2.c b/drivers/mfd/dln2.c
new file mode 100644
index 0000000..6d49685
--- /dev/null
+++ b/drivers/mfd/dln2.c
@@ -0,0 +1,781 @@
+/*
+ * Driver for the Diolan DLN-2 USB adapter
+ *
+ * Copyright (c) 2014 Intel Corporation
+ *
+ * Derived from:
+ * i2c-diolan-u2c.c
+ * Copyright (c) 2010-2011 Ericsson AB
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/dln2.h>
+#include <linux/rculist.h>
+
+struct dln2_header {
+ __le16 size;
+ __le16 id;
+ __le16 echo;
+ __le16 handle;
+};
+
+struct dln2_response {
+ struct dln2_header hdr;
+ __le16 result;
+};
+
+#define DLN2_GENERIC_MODULE_ID 0x00
+#define DLN2_GENERIC_CMD(cmd) DLN2_CMD(cmd, DLN2_GENERIC_MODULE_ID)
+#define CMD_GET_DEVICE_VER DLN2_GENERIC_CMD(0x30)
+#define CMD_GET_DEVICE_SN DLN2_GENERIC_CMD(0x31)
+
+#define DLN2_HW_ID 0x200
+#define DLN2_USB_TIMEOUT 200 /* in ms */
+#define DLN2_MAX_RX_SLOTS 16
+#define DLN2_MAX_URBS 16
+#define DLN2_RX_BUF_SIZE 512
+
+enum dln2_handle {
+ DLN2_HANDLE_EVENT = 0, /* don't change, hardware defined */
+ DLN2_HANDLE_CTRL,
+ DLN2_HANDLE_GPIO,
+ DLN2_HANDLE_I2C,
+ DLN2_HANDLE_SPI,
+ DLN2_HANDLES
+};
+
+/*
+ * Receive context used between the receive demultiplexer and the transfer
+ * routine. While sending a request the transfer routine will look for a free
+ * receive context and use it to wait for a response and to receive the URB and
+ * thus the response data.
+ */
+struct dln2_rx_context {
+ /* completion used to wait for a response */
+ struct completion done;
+
+ /* if non-NULL the URB contains the response */
+ struct urb *urb;
+
+ /* if true then this context is used to wait for a response */
+ bool in_use;
+};
+
+/*
+ * Receive contexts for a particular DLN2 module (i2c, gpio, etc.). We use the
+ * handle header field to identify the module in dln2_dev.mod_rx_slots and then
+ * the echo header field to index the slots field and find the receive context
+ * for a particular request.
+ */
+struct dln2_mod_rx_slots {
+ /* RX slots bitmap */
+ DECLARE_BITMAP(bmap, DLN2_MAX_RX_SLOTS);
+
+ /* used to wait for a free RX slot */
+ wait_queue_head_t wq;
+
+ /* used to wait for an RX operation to complete */
+ struct dln2_rx_context slots[DLN2_MAX_RX_SLOTS];
+
+ /* avoid races between alloc/free_rx_slot and dln2_rx_transfer */
+ spinlock_t lock;
+};
+
+struct dln2_dev {
+ struct usb_device *usb_dev;
+ struct usb_interface *interface;
+ u8 ep_in;
+ u8 ep_out;
+
+ struct urb *rx_urb[DLN2_MAX_URBS];
+ void *rx_buf[DLN2_MAX_URBS];
+
+ struct dln2_mod_rx_slots mod_rx_slots[DLN2_HANDLES];
+
+ struct list_head event_cb_list;
+ spinlock_t event_cb_lock;
+
+ bool disconnect;
+ int active_transfers;
+ wait_queue_head_t disconnect_wq;
+ spinlock_t disconnect_lock;
+};
+
+struct dln2_event_cb_entry {
+ struct list_head list;
+ u16 id;
+ struct platform_device *pdev;
+ dln2_event_cb_t callback;
+};
+
+int dln2_register_event_cb(struct platform_device *pdev, u16 id,
+ dln2_event_cb_t event_cb)
+{
+ struct dln2_dev *dln2 = dev_get_drvdata(pdev->dev.parent);
+ struct dln2_event_cb_entry *i, *entry;
+ unsigned long flags;
+ int ret = 0;
+
+ entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+ if (!entry)
+ return -ENOMEM;
+
+ entry->id = id;
+ entry->callback = event_cb;
+ entry->pdev = pdev;
+
+ spin_lock_irqsave(&dln2->event_cb_lock, flags);
+
+ list_for_each_entry(i, &dln2->event_cb_list, list) {
+ if (i->id == id) {
+ ret = -EBUSY;
+ break;
+ }
+ }
+
+ if (!ret)
+ list_add_rcu(&entry->list, &dln2->event_cb_list);
+
+ spin_unlock_irqrestore(&dln2->event_cb_lock, flags);
+
+ if (ret)
+ kfree(entry);
+
+ return ret;
+}
+EXPORT_SYMBOL(dln2_register_event_cb);
+
+void dln2_unregister_event_cb(struct platform_device *pdev, u16 id)
+{
+ struct dln2_dev *dln2 = dev_get_drvdata(pdev->dev.parent);
+ struct dln2_event_cb_entry *i;
+ unsigned long flags;
+ bool found = false;
+
+ spin_lock_irqsave(&dln2->event_cb_lock, flags);
+
+ list_for_each_entry(i, &dln2->event_cb_list, list) {
+ if (i->id == id) {
+ list_del_rcu(&i->list);
+ found = true;
+ break;
+ }
+ }
+
+ spin_unlock_irqrestore(&dln2->event_cb_lock, flags);
+
+ if (found) {
+ synchronize_rcu();
+ kfree(i);
+ }
+}
+EXPORT_SYMBOL(dln2_unregister_event_cb);
+
+/*
+ * Returns true if a valid transfer slot is found. In this case the URB must not
+ * be resubmitted immediately in dln2_rx as we need the data when dln2_transfer
+ * is woke up. It will be resubmitted there.
+ */
+static bool dln2_transfer_complete(struct dln2_dev *dln2, struct urb *urb,
+ u16 handle, u16 rx_slot)
+{
+ struct device *dev = &dln2->interface->dev;
+ struct dln2_mod_rx_slots *rxs = &dln2->mod_rx_slots[handle];
+ struct dln2_rx_context *rxc;
+ bool valid_slot = false;
+
+ if (rx_slot >= DLN2_MAX_RX_SLOTS)
+ goto out;
+
+ rxc = &rxs->slots[rx_slot];
+
+ /*
+ * No need to disable interrupts as this lock is not taken in interrupt
+ * context elsewhere in this driver. This function (or its callers) are
+ * also not exported to other modules.
+ */
+ spin_lock(&rxs->lock);
+ if (rxc->in_use && !rxc->urb) {
+ rxc->urb = urb;
+ complete(&rxc->done);
+ valid_slot = true;
+ }
+ spin_unlock(&rxs->lock);
+
+out:
+ if (!valid_slot)
+ dev_warn(dev, "bad/late response %d/%d\n", handle, rx_slot);
+
+ return valid_slot;
+}
+
+static void dln2_run_event_callbacks(struct dln2_dev *dln2, u16 id, u16 echo,
+ void *data, int len)
+{
+ struct dln2_event_cb_entry *i;
+
+ rcu_read_lock();
+
+ list_for_each_entry_rcu(i, &dln2->event_cb_list, list) {
+ if (i->id == id) {
+ i->callback(i->pdev, echo, data, len);
+ break;
+ }
+ }
+
+ rcu_read_unlock();
+}
+
+static void dln2_rx(struct urb *urb)
+{
+ struct dln2_dev *dln2 = urb->context;
+ struct dln2_header *hdr = urb->transfer_buffer;
+ struct device *dev = &dln2->interface->dev;
+ u16 id, echo, handle, size;
+ u8 *data;
+ int len;
+ int err;
+
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ case -EPIPE:
+ /* this urb is terminated, clean up */
+ dev_dbg(dev, "urb shutting down with status %d\n", urb->status);
+ return;
+ default:
+ dev_dbg(dev, "nonzero urb status received %d\n", urb->status);
+ goto out;
+ }
+
+ if (urb->actual_length < sizeof(struct dln2_header)) {
+ dev_err(dev, "short response: %d\n", urb->actual_length);
+ goto out;
+ }
+
+ handle = le16_to_cpu(hdr->handle);
+ id = le16_to_cpu(hdr->id);
+ echo = le16_to_cpu(hdr->echo);
+ size = le16_to_cpu(hdr->size);
+
+ if (size != urb->actual_length) {
+ dev_err(dev, "size mismatch: handle %x cmd %x echo %x size %d actual %d\n",
+ handle, id, echo, size, urb->actual_length);
+ goto out;
+ }
+
+ if (handle >= DLN2_HANDLES) {
+ dev_warn(dev, "invalid handle %d\n", handle);
+ goto out;
+ }
+
+ data = urb->transfer_buffer + sizeof(struct dln2_header);
+ len = urb->actual_length - sizeof(struct dln2_header);
+
+ if (handle == DLN2_HANDLE_EVENT) {
+ dln2_run_event_callbacks(dln2, id, echo, data, len);
+ } else {
+ /* URB will be re-submitted in _dln2_transfer (free_rx_slot) */
+ if (dln2_transfer_complete(dln2, urb, handle, echo))
+ return;
+ }
+
+out:
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err < 0)
+ dev_err(dev, "failed to resubmit RX URB: %d\n", err);
+}
+
+static void *dln2_prep_buf(u16 handle, u16 cmd, u16 echo, const void *obuf,
+ int *obuf_len, gfp_t gfp)
+{
+ int len;
+ void *buf;
+ struct dln2_header *hdr;
+
+ len = *obuf_len + sizeof(*hdr);
+ buf = kmalloc(len, gfp);
+ if (!buf)
+ return NULL;
+
+ hdr = (struct dln2_header *)buf;
+ hdr->id = cpu_to_le16(cmd);
+ hdr->size = cpu_to_le16(len);
+ hdr->echo = cpu_to_le16(echo);
+ hdr->handle = cpu_to_le16(handle);
+
+ memcpy(buf + sizeof(*hdr), obuf, *obuf_len);
+
+ *obuf_len = len;
+
+ return buf;
+}
+
+static int dln2_send_wait(struct dln2_dev *dln2, u16 handle, u16 cmd, u16 echo,
+ const void *obuf, int obuf_len)
+{
+ int ret = 0;
+ int len = obuf_len;
+ void *buf;
+ int actual;
+
+ buf = dln2_prep_buf(handle, cmd, echo, obuf, &len, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = usb_bulk_msg(dln2->usb_dev,
+ usb_sndbulkpipe(dln2->usb_dev, dln2->ep_out),
+ buf, len, &actual, DLN2_USB_TIMEOUT);
+
+ kfree(buf);
+
+ return ret;
+}
+
+static bool find_free_slot(struct dln2_dev *dln2, u16 handle, int *slot)
+{
+ struct dln2_mod_rx_slots *rxs;
+ unsigned long flags;
+
+ if (dln2->disconnect) {
+ *slot = -ENODEV;
+ return true;
+ }
+
+ rxs = &dln2->mod_rx_slots[handle];
+
+ spin_lock_irqsave(&rxs->lock, flags);
+
+ *slot = find_first_zero_bit(rxs->bmap, DLN2_MAX_RX_SLOTS);
+
+ if (*slot < DLN2_MAX_RX_SLOTS) {
+ struct dln2_rx_context *rxc = &rxs->slots[*slot];
+
+ set_bit(*slot, rxs->bmap);
+ rxc->in_use = true;
+ }
+
+ spin_unlock_irqrestore(&rxs->lock, flags);
+
+ return *slot < DLN2_MAX_RX_SLOTS;
+}
+
+static int alloc_rx_slot(struct dln2_dev *dln2, u16 handle)
+{
+ int ret;
+ int slot;
+
+ /*
+ * No need to timeout here, the wait is bounded by the timeout in
+ * _dln2_transfer.
+ */
+ ret = wait_event_interruptible(dln2->mod_rx_slots[handle].wq,
+ find_free_slot(dln2, handle, &slot));
+ if (ret < 0)
+ return ret;
+
+ return slot;
+}
+
+static void free_rx_slot(struct dln2_dev *dln2, u16 handle, int slot)
+{
+ struct dln2_mod_rx_slots *rxs;
+ struct urb *urb = NULL;
+ unsigned long flags;
+ struct dln2_rx_context *rxc;
+
+ rxs = &dln2->mod_rx_slots[handle];
+
+ spin_lock_irqsave(&rxs->lock, flags);
+
+ clear_bit(slot, rxs->bmap);
+
+ rxc = &rxs->slots[slot];
+ rxc->in_use = false;
+ urb = rxc->urb;
+ rxc->urb = NULL;
+ reinit_completion(&rxc->done);
+
+ spin_unlock_irqrestore(&rxs->lock, flags);
+
+ if (urb) {
+ int err;
+ struct device *dev = &dln2->interface->dev;
+
+ err = usb_submit_urb(urb, GFP_KERNEL);
+ if (err < 0)
+ dev_err(dev, "failed to resubmit RX URB: %d\n", err);
+ }
+
+ wake_up_interruptible(&rxs->wq);
+}
+
+static int _dln2_transfer(struct dln2_dev *dln2, u16 handle, u16 cmd,
+ const void *obuf, unsigned obuf_len,
+ void *ibuf, unsigned *ibuf_len)
+{
+ int ret = 0;
+ int rx_slot;
+ struct dln2_response *rsp;
+ struct dln2_rx_context *rxc;
+ struct device *dev = &dln2->interface->dev;
+ const unsigned long timeout = DLN2_USB_TIMEOUT * HZ / 1000;
+ struct dln2_mod_rx_slots *rxs = &dln2->mod_rx_slots[handle];
+ int size;
+
+ spin_lock(&dln2->disconnect_lock);
+ if (!dln2->disconnect)
+ dln2->active_transfers++;
+ else
+ ret = -ENODEV;
+ spin_unlock(&dln2->disconnect_lock);
+
+ if (ret)
+ return ret;
+
+ rx_slot = alloc_rx_slot(dln2, handle);
+ if (rx_slot < 0) {
+ ret = rx_slot;
+ goto out_decr;
+ }
+
+ ret = dln2_send_wait(dln2, handle, cmd, rx_slot, obuf, obuf_len);
+ if (ret < 0) {
+ dev_err(dev, "USB write failed: %d\n", ret);
+ goto out_free_rx_slot;
+ }
+
+ rxc = &rxs->slots[rx_slot];
+
+ ret = wait_for_completion_interruptible_timeout(&rxc->done, timeout);
+ if (ret <= 0) {
+ if (!ret)
+ ret = -ETIMEDOUT;
+ goto out_free_rx_slot;
+ } else {
+ ret = 0;
+ }
+
+ if (dln2->disconnect) {
+ ret = -ENODEV;
+ goto out_free_rx_slot;
+ }
+
+ /* if we got here we know that the response header has been checked */
+ rsp = rxc->urb->transfer_buffer;
+ size = le16_to_cpu(rsp->hdr.size);
+
+ if (size < sizeof(*rsp)) {
+ ret = -EPROTO;
+ goto out_free_rx_slot;
+ }
+
+ if (le16_to_cpu(rsp->result) > 0x80) {
+ dev_dbg(dev, "%d received response with error %d\n",
+ handle, le16_to_cpu(rsp->result));
+ ret = -EREMOTEIO;
+ goto out_free_rx_slot;
+ }
+
+ if (!ibuf)
+ goto out_free_rx_slot;
+
+ if (*ibuf_len > size - sizeof(*rsp))
+ *ibuf_len = size - sizeof(*rsp);
+
+ memcpy(ibuf, rsp + 1, *ibuf_len);
+
+out_free_rx_slot:
+ free_rx_slot(dln2, handle, rx_slot);
+out_decr:
+ spin_lock(&dln2->disconnect_lock);
+ dln2->active_transfers--;
+ spin_unlock(&dln2->disconnect_lock);
+ if (dln2->disconnect)
+ wake_up(&dln2->disconnect_wq);
+
+ return ret;
+}
+
+int dln2_transfer(struct platform_device *pdev, u16 cmd,
+ const void *obuf, unsigned obuf_len,
+ void *ibuf, unsigned *ibuf_len)
+{
+ struct dln2_platform_data *dln2_pdata;
+ struct dln2_dev *dln2;
+ u16 handle;
+
+ dln2 = dev_get_drvdata(pdev->dev.parent);
+ dln2_pdata = dev_get_platdata(&pdev->dev);
+ handle = dln2_pdata->handle;
+
+ return _dln2_transfer(dln2, handle, cmd, obuf, obuf_len, ibuf,
+ ibuf_len);
+}
+EXPORT_SYMBOL(dln2_transfer);
+
+static int dln2_check_hw(struct dln2_dev *dln2)
+{
+ int ret;
+ __le32 hw_type;
+ int len = sizeof(hw_type);
+
+ ret = _dln2_transfer(dln2, DLN2_HANDLE_CTRL, CMD_GET_DEVICE_VER,
+ NULL, 0, &hw_type, &len);
+ if (ret < 0)
+ return ret;
+ if (len < sizeof(hw_type))
+ return -EREMOTEIO;
+
+ if (le32_to_cpu(hw_type) != DLN2_HW_ID) {
+ dev_err(&dln2->interface->dev, "Device ID 0x%x not supported\n",
+ le32_to_cpu(hw_type));
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int dln2_print_serialno(struct dln2_dev *dln2)
+{
+ int ret;
+ __le32 serial_no;
+ int len = sizeof(serial_no);
+ struct device *dev = &dln2->interface->dev;
+
+ ret = _dln2_transfer(dln2, DLN2_HANDLE_CTRL, CMD_GET_DEVICE_SN, NULL, 0,
+ &serial_no, &len);
+ if (ret < 0)
+ return ret;
+ if (len < sizeof(serial_no))
+ return -EREMOTEIO;
+
+ dev_info(dev, "Diolan DLN2 serial %u\n", le32_to_cpu(serial_no));
+
+ return 0;
+}
+
+static int dln2_hw_init(struct dln2_dev *dln2)
+{
+ int ret;
+
+ ret = dln2_check_hw(dln2);
+ if (ret < 0)
+ return ret;
+
+ return dln2_print_serialno(dln2);
+}
+
+static void dln2_free_rx_urbs(struct dln2_dev *dln2)
+{
+ int i;
+
+ for (i = 0; i < DLN2_MAX_URBS; i++) {
+ usb_kill_urb(dln2->rx_urb[i]);
+ usb_free_urb(dln2->rx_urb[i]);
+ kfree(dln2->rx_buf[i]);
+ }
+}
+
+static void dln2_free(struct dln2_dev *dln2)
+{
+ dln2_free_rx_urbs(dln2);
+ usb_put_dev(dln2->usb_dev);
+ kfree(dln2);
+}
+
+static int dln2_setup_rx_urbs(struct dln2_dev *dln2,
+ struct usb_host_interface *hostif)
+{
+ int i;
+ int ret;
+ const int rx_max_size = DLN2_RX_BUF_SIZE;
+ struct device *dev = &dln2->interface->dev;
+
+ for (i = 0; i < DLN2_MAX_URBS; i++) {
+ dln2->rx_buf[i] = kmalloc(rx_max_size, GFP_KERNEL);
+ if (!dln2->rx_buf[i])
+ return -ENOMEM;
+
+ dln2->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dln2->rx_urb[i])
+ return -ENOMEM;
+
+ usb_fill_bulk_urb(dln2->rx_urb[i], dln2->usb_dev,
+ usb_rcvbulkpipe(dln2->usb_dev, dln2->ep_in),
+ dln2->rx_buf[i], rx_max_size, dln2_rx, dln2);
+
+ ret = usb_submit_urb(dln2->rx_urb[i], GFP_KERNEL);
+ if (ret < 0) {
+ dev_err(dev, "failed to submit RX URB: %d\n", ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static struct dln2_platform_data dln2_pdata_gpio = {
+ .handle = DLN2_HANDLE_GPIO,
+};
+
+/* Only one I2C port seems to be supported on current hardware */
+static struct dln2_platform_data dln2_pdata_i2c = {
+ .handle = DLN2_HANDLE_I2C,
+ .port = 0,
+};
+
+/* Only one SPI port supported */
+static struct dln2_platform_data dln2_pdata_spi = {
+ .handle = DLN2_HANDLE_SPI,
+ .port = 0,
+};
+
+static const struct mfd_cell dln2_devs[] = {
+ {
+ .name = "dln2-gpio",
+ .platform_data = &dln2_pdata_gpio,
+ .pdata_size = sizeof(struct dln2_platform_data),
+ },
+ {
+ .name = "dln2-i2c",
+ .platform_data = &dln2_pdata_i2c,
+ .pdata_size = sizeof(struct dln2_platform_data),
+ },
+ {
+ .name = "dln2-spi",
+ .platform_data = &dln2_pdata_spi,
+ .pdata_size = sizeof(struct dln2_platform_data),
+ },
+};
+
+static void dln2_disconnect(struct usb_interface *interface)
+{
+ struct dln2_dev *dln2 = usb_get_intfdata(interface);
+ int i, j;
+
+ /* don't allow starting new transfers */
+ spin_lock(&dln2->disconnect_lock);
+ dln2->disconnect = true;
+ spin_unlock(&dln2->disconnect_lock);
+
+ /* cancel in progress transfers */
+ for (i = 0; i < DLN2_HANDLES; i++) {
+ struct dln2_mod_rx_slots *rxs = &dln2->mod_rx_slots[i];
+ unsigned long flags;
+
+ spin_lock_irqsave(&rxs->lock, flags);
+
+ /* cancel all response waiters */
+ for (j = 0; j < DLN2_MAX_RX_SLOTS; j++) {
+ struct dln2_rx_context *rxc = &rxs->slots[j];
+
+ if (rxc->in_use)
+ complete(&rxc->done);
+ }
+
+ spin_unlock_irqrestore(&rxs->lock, flags);
+ }
+
+ /* wait for transfers to end */
+ wait_event(dln2->disconnect_wq, !dln2->active_transfers);
+
+ mfd_remove_devices(&interface->dev);
+
+ dln2_free(dln2);
+}
+
+static int dln2_probe(struct usb_interface *interface,
+ const struct usb_device_id *usb_id)
+{
+ struct usb_host_interface *hostif = interface->cur_altsetting;
+ struct device *dev = &interface->dev;
+ struct dln2_dev *dln2;
+ int ret;
+ int i, j;
+
+ if (hostif->desc.bInterfaceNumber != 0 ||
+ hostif->desc.bNumEndpoints < 2)
+ return -ENODEV;
+
+ dln2 = kzalloc(sizeof(*dln2), GFP_KERNEL);
+ if (!dln2)
+ return -ENOMEM;
+
+ dln2->ep_out = hostif->endpoint[0].desc.bEndpointAddress;
+ dln2->ep_in = hostif->endpoint[1].desc.bEndpointAddress;
+ dln2->usb_dev = usb_get_dev(interface_to_usbdev(interface));
+ dln2->interface = interface;
+ usb_set_intfdata(interface, dln2);
+ init_waitqueue_head(&dln2->disconnect_wq);
+
+ for (i = 0; i < DLN2_HANDLES; i++) {
+ init_waitqueue_head(&dln2->mod_rx_slots[i].wq);
+ spin_lock_init(&dln2->mod_rx_slots[i].lock);
+ for (j = 0; j < DLN2_MAX_RX_SLOTS; j++)
+ init_completion(&dln2->mod_rx_slots[i].slots[j].done);
+ }
+
+ spin_lock_init(&dln2->event_cb_lock);
+ spin_lock_init(&dln2->disconnect_lock);
+ INIT_LIST_HEAD(&dln2->event_cb_list);
+
+ ret = dln2_setup_rx_urbs(dln2, hostif);
+ if (ret)
+ goto out_cleanup;
+
+ ret = dln2_hw_init(dln2);
+ if (ret < 0) {
+ dev_err(dev, "failed to initialize hardware\n");
+ goto out_cleanup;
+ }
+
+ ret = mfd_add_hotplug_devices(dev, dln2_devs, ARRAY_SIZE(dln2_devs));
+ if (ret != 0) {
+ dev_err(dev, "failed to add mfd devices to core\n");
+ goto out_cleanup;
+ }
+
+ return 0;
+
+out_cleanup:
+ dln2_free(dln2);
+
+ return ret;
+}
+
+static const struct usb_device_id dln2_table[] = {
+ { USB_DEVICE(0xa257, 0x2013) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(usb, dln2_table);
+
+static struct usb_driver dln2_driver = {
+ .name = "dln2",
+ .probe = dln2_probe,
+ .disconnect = dln2_disconnect,
+ .id_table = dln2_table,
+};
+
+module_usb_driver(dln2_driver);
+
+MODULE_AUTHOR("Octavian Purdila <octavian.purdila@intel.com>");
+MODULE_DESCRIPTION("Core driver for the Diolan DLN2 interface adapter");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/lpc_sch.c b/drivers/mfd/lpc_sch.c
index c980da4..5c38df3 100644
--- a/drivers/mfd/lpc_sch.c
+++ b/drivers/mfd/lpc_sch.c
@@ -193,11 +193,7 @@
return -ENODEV;
}
- ret = mfd_add_devices(&dev->dev, 0, lpc_sch_cells, cells, NULL, 0, NULL);
- if (ret)
- mfd_remove_devices(&dev->dev);
-
- return ret;
+ return mfd_add_devices(&dev->dev, 0, lpc_sch_cells, cells, NULL, 0, NULL);
}
static void lpc_sch_remove(struct pci_dev *dev)
diff --git a/drivers/mfd/max14577.c b/drivers/mfd/max14577.c
index de96b7f..3bf8def 100644
--- a/drivers/mfd/max14577.c
+++ b/drivers/mfd/max14577.c
@@ -1,7 +1,7 @@
/*
* max14577.c - mfd core driver for the Maxim 14577/77836
*
- * Copyright (C) 2014 Samsung Electrnoics
+ * Copyright (C) 2014 Samsung Electronics
* Chanwoo Choi <cw00.choi@samsung.com>
* Krzysztof Kozlowski <k.kozlowski@samsung.com>
*
diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c
index 711773e..a159593 100644
--- a/drivers/mfd/max77693.c
+++ b/drivers/mfd/max77693.c
@@ -43,9 +43,15 @@
static const struct mfd_cell max77693_devs[] = {
{ .name = "max77693-pmic", },
- { .name = "max77693-charger", },
+ {
+ .name = "max77693-charger",
+ .of_compatible = "maxim,max77693-charger",
+ },
{ .name = "max77693-muic", },
- { .name = "max77693-haptic", },
+ {
+ .name = "max77693-haptic",
+ .of_compatible = "maxim,max77693-haptic",
+ },
{
.name = "max77693-flash",
.of_compatible = "maxim,max77693-flash",
@@ -147,6 +153,12 @@
.num_irqs = ARRAY_SIZE(max77693_muic_irqs),
};
+static const struct regmap_config max77693_regmap_haptic_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MAX77693_HAPTIC_REG_END,
+};
+
static int max77693_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
@@ -196,6 +208,15 @@
}
i2c_set_clientdata(max77693->haptic, max77693);
+ max77693->regmap_haptic = devm_regmap_init_i2c(max77693->haptic,
+ &max77693_regmap_haptic_config);
+ if (IS_ERR(max77693->regmap_haptic)) {
+ ret = PTR_ERR(max77693->regmap_haptic);
+ dev_err(max77693->dev,
+ "failed to initialize haptic register map: %d\n", ret);
+ goto err_regmap;
+ }
+
/*
* Initialize register map for MUIC device because use regmap-muic
* instance of MUIC device when irq of max77693 is initialized
@@ -207,7 +228,7 @@
ret = PTR_ERR(max77693->regmap_muic);
dev_err(max77693->dev,
"failed to allocate register map: %d\n", ret);
- goto err_regmap_muic;
+ goto err_regmap;
}
ret = regmap_add_irq_chip(max77693->regmap, max77693->irq,
@@ -217,7 +238,7 @@
&max77693->irq_data_led);
if (ret) {
dev_err(max77693->dev, "failed to add irq chip: %d\n", ret);
- goto err_regmap_muic;
+ goto err_regmap;
}
ret = regmap_add_irq_chip(max77693->regmap, max77693->irq,
@@ -280,7 +301,7 @@
regmap_del_irq_chip(max77693->irq, max77693->irq_data_topsys);
err_irq_topsys:
regmap_del_irq_chip(max77693->irq, max77693->irq_data_led);
-err_regmap_muic:
+err_regmap:
i2c_unregister_device(max77693->haptic);
err_i2c_haptic:
i2c_unregister_device(max77693->muic);
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index f3338fe..2a87f69 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -125,9 +125,15 @@
struct platform_device *pdev;
struct device_node *np = NULL;
int ret = -ENOMEM;
+ int platform_id;
int r;
- pdev = platform_device_alloc(cell->name, id + cell->id);
+ if (id < 0)
+ platform_id = id;
+ else
+ platform_id = id + cell->id;
+
+ pdev = platform_device_alloc(cell->name, platform_id);
if (!pdev)
goto fail_alloc;
diff --git a/drivers/mfd/rts5227.c b/drivers/mfd/rts5227.c
index 9c8eec8..3240740 100644
--- a/drivers/mfd/rts5227.c
+++ b/drivers/mfd/rts5227.c
@@ -130,6 +130,12 @@
static int rts5227_optimize_phy(struct rtsx_pcr *pcr)
{
+ int err;
+
+ err = rtsx_gops_pm_reset(pcr);
+ if (err < 0)
+ return err;
+
/* Optimize RX sensitivity */
return rtsx_pci_write_phy_register(pcr, 0x00, 0xBA42);
}
diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
index 573de7b..cf425cc 100644
--- a/drivers/mfd/rts5249.c
+++ b/drivers/mfd/rts5249.c
@@ -130,6 +130,10 @@
{
int err;
+ err = rtsx_gops_pm_reset(pcr);
+ if (err < 0)
+ return err;
+
err = rtsx_pci_write_phy_register(pcr, PHY_REG_REV,
PHY_REG_REV_RESV | PHY_REG_REV_RXIDLE_LATCHED |
PHY_REG_REV_P1_EN | PHY_REG_REV_RXIDLE_EN |
diff --git a/drivers/mfd/rtsx_gops.c b/drivers/mfd/rtsx_gops.c
new file mode 100644
index 0000000..b1a98c6
--- /dev/null
+++ b/drivers/mfd/rtsx_gops.c
@@ -0,0 +1,37 @@
+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ * Micky Ching <micky_ching@realsil.com.cn>
+ */
+
+#include <linux/mfd/rtsx_pci.h>
+#include "rtsx_pcr.h"
+
+int rtsx_gops_pm_reset(struct rtsx_pcr *pcr)
+{
+ int err;
+
+ /* init aspm */
+ rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, 0xFF, 0x00);
+ err = rtsx_pci_update_cfg_byte(pcr, LCTLR, ~LCTLR_ASPM_CTL_MASK, 0x00);
+ if (err < 0)
+ return err;
+
+ /* reset PM_CTRL3 before send buffer cmd */
+ return rtsx_pci_write_register(pcr, PM_CTRL3, D3_DELINK_MODE_EN, 0x00);
+}
diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h
index 07e4c2e..fe2bbb6 100644
--- a/drivers/mfd/rtsx_pcr.h
+++ b/drivers/mfd/rtsx_pcr.h
@@ -72,4 +72,7 @@
pcr->ms_pull_ctl_disable_tbl = __device##_ms_pull_ctl_disable_tbl; \
} while (0)
+/* generic operations */
+int rtsx_gops_pm_reset(struct rtsx_pcr *pcr);
+
#endif
diff --git a/drivers/mfd/rtsx_usb.c b/drivers/mfd/rtsx_usb.c
index 9cf98d1..dbdd0fa 100644
--- a/drivers/mfd/rtsx_usb.c
+++ b/drivers/mfd/rtsx_usb.c
@@ -647,8 +647,8 @@
/* initialize USB SG transfer timer */
setup_timer(&ucr->sg_timer, rtsx_usb_sg_timed_out, (unsigned long) ucr);
- ret = mfd_add_devices(&intf->dev, usb_dev->devnum, rtsx_usb_cells,
- ARRAY_SIZE(rtsx_usb_cells), NULL, 0, NULL);
+ ret = mfd_add_hotplug_devices(&intf->dev, rtsx_usb_cells,
+ ARRAY_SIZE(rtsx_usb_cells));
if (ret)
goto out_init_fail;
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index dba7e2b..0a7bc43 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -27,11 +27,11 @@
#include <linux/mfd/samsung/irq.h>
#include <linux/mfd/samsung/s2mpa01.h>
#include <linux/mfd/samsung/s2mps11.h>
+#include <linux/mfd/samsung/s2mps13.h>
#include <linux/mfd/samsung/s2mps14.h>
#include <linux/mfd/samsung/s2mpu02.h>
#include <linux/mfd/samsung/s5m8763.h>
#include <linux/mfd/samsung/s5m8767.h>
-#include <linux/regulator/machine.h>
#include <linux/regmap.h>
static const struct mfd_cell s5m8751_devs[] = {
@@ -74,6 +74,15 @@
}
};
+static const struct mfd_cell s2mps13_devs[] = {
+ { .name = "s2mps13-pmic", },
+ { .name = "s2mps13-rtc", },
+ {
+ .name = "s2mps13-clk",
+ .of_compatible = "samsung,s2mps13-clk",
+ },
+};
+
static const struct mfd_cell s2mps14_devs[] = {
{
.name = "s2mps14-pmic",
@@ -108,6 +117,9 @@
.compatible = "samsung,s2mps11-pmic",
.data = (void *)S2MPS11X,
}, {
+ .compatible = "samsung,s2mps13-pmic",
+ .data = (void *)S2MPS13X,
+ }, {
.compatible = "samsung,s2mps14-pmic",
.data = (void *)S2MPS14X,
}, {
@@ -194,6 +206,15 @@
.cache_type = REGCACHE_FLAT,
};
+static const struct regmap_config s2mps13_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = S2MPS13_REG_LDODSCH5,
+ .volatile_reg = s2mps11_volatile,
+ .cache_type = REGCACHE_FLAT,
+};
+
static const struct regmap_config s2mps14_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -325,6 +346,9 @@
case S2MPS11X:
regmap = &s2mps11_regmap_config;
break;
+ case S2MPS13X:
+ regmap = &s2mps13_regmap_config;
+ break;
case S2MPS14X:
regmap = &s2mps14_regmap_config;
break;
@@ -378,6 +402,10 @@
sec_devs = s2mps11_devs;
num_sec_devs = ARRAY_SIZE(s2mps11_devs);
break;
+ case S2MPS13X:
+ sec_devs = s2mps13_devs;
+ num_sec_devs = ARRAY_SIZE(s2mps13_devs);
+ break;
case S2MPS14X:
sec_devs = s2mps14_devs;
num_sec_devs = ARRAY_SIZE(s2mps14_devs);
@@ -432,15 +460,6 @@
*/
disable_irq(sec_pmic->irq);
- switch (sec_pmic->device_type) {
- case S2MPS14X:
- case S2MPU02:
- regulator_suspend_prepare(PM_SUSPEND_MEM);
- break;
- default:
- break;
- }
-
return 0;
}
diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
index f9a5786..ba86a91 100644
--- a/drivers/mfd/sec-irq.c
+++ b/drivers/mfd/sec-irq.c
@@ -389,14 +389,22 @@
.ack_base = S2MPS11_REG_INT1,
};
+#define S2MPS1X_IRQ_CHIP_COMMON_DATA \
+ .irqs = s2mps14_irqs, \
+ .num_irqs = ARRAY_SIZE(s2mps14_irqs), \
+ .num_regs = 3, \
+ .status_base = S2MPS14_REG_INT1, \
+ .mask_base = S2MPS14_REG_INT1M, \
+ .ack_base = S2MPS14_REG_INT1 \
+
+static const struct regmap_irq_chip s2mps13_irq_chip = {
+ .name = "s2mps13",
+ S2MPS1X_IRQ_CHIP_COMMON_DATA,
+};
+
static const struct regmap_irq_chip s2mps14_irq_chip = {
.name = "s2mps14",
- .irqs = s2mps14_irqs,
- .num_irqs = ARRAY_SIZE(s2mps14_irqs),
- .num_regs = 3,
- .status_base = S2MPS14_REG_INT1,
- .mask_base = S2MPS14_REG_INT1M,
- .ack_base = S2MPS14_REG_INT1,
+ S2MPS1X_IRQ_CHIP_COMMON_DATA,
};
static const struct regmap_irq_chip s2mpu02_irq_chip = {
@@ -452,6 +460,9 @@
case S2MPS11X:
sec_irq_chip = &s2mps11_irq_chip;
break;
+ case S2MPS13X:
+ sec_irq_chip = &s2mps13_irq_chip;
+ break;
case S2MPS14X:
sec_irq_chip = &s2mps14_irq_chip;
break;
diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index ca15878..72373b1 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -15,6 +15,7 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/list.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
@@ -22,31 +23,94 @@
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
+#include <linux/slab.h>
static struct platform_driver syscon_driver;
+static DEFINE_SPINLOCK(syscon_list_slock);
+static LIST_HEAD(syscon_list);
+
struct syscon {
+ struct device_node *np;
struct regmap *regmap;
+ struct list_head list;
};
-static int syscon_match_node(struct device *dev, void *data)
-{
- struct device_node *dn = data;
+static struct regmap_config syscon_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+};
- return (dev->of_node == dn) ? 1 : 0;
+static struct syscon *of_syscon_register(struct device_node *np)
+{
+ struct syscon *syscon;
+ struct regmap *regmap;
+ void __iomem *base;
+ int ret;
+ struct regmap_config syscon_config = syscon_regmap_config;
+
+ if (!of_device_is_compatible(np, "syscon"))
+ return ERR_PTR(-EINVAL);
+
+ syscon = kzalloc(sizeof(*syscon), GFP_KERNEL);
+ if (!syscon)
+ return ERR_PTR(-ENOMEM);
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ ret = -ENOMEM;
+ goto err_map;
+ }
+
+ /* Parse the device's DT node for an endianness specification */
+ if (of_property_read_bool(np, "big-endian"))
+ syscon_config.val_format_endian = REGMAP_ENDIAN_BIG;
+ else if (of_property_read_bool(np, "little-endian"))
+ syscon_config.val_format_endian = REGMAP_ENDIAN_LITTLE;
+
+ regmap = regmap_init_mmio(NULL, base, &syscon_config);
+ if (IS_ERR(regmap)) {
+ pr_err("regmap init failed\n");
+ ret = PTR_ERR(regmap);
+ goto err_regmap;
+ }
+
+ syscon->regmap = regmap;
+ syscon->np = np;
+
+ spin_lock(&syscon_list_slock);
+ list_add_tail(&syscon->list, &syscon_list);
+ spin_unlock(&syscon_list_slock);
+
+ return syscon;
+
+err_regmap:
+ iounmap(base);
+err_map:
+ kfree(syscon);
+ return ERR_PTR(ret);
}
struct regmap *syscon_node_to_regmap(struct device_node *np)
{
- struct syscon *syscon;
- struct device *dev;
+ struct syscon *entry, *syscon = NULL;
- dev = driver_find_device(&syscon_driver.driver, NULL, np,
- syscon_match_node);
- if (!dev)
- return ERR_PTR(-EPROBE_DEFER);
+ spin_lock(&syscon_list_slock);
- syscon = dev_get_drvdata(dev);
+ list_for_each_entry(entry, &syscon_list, list)
+ if (entry->np == np) {
+ syscon = entry;
+ break;
+ }
+
+ spin_unlock(&syscon_list_slock);
+
+ if (!syscon)
+ syscon = of_syscon_register(np);
+
+ if (IS_ERR(syscon))
+ return ERR_CAST(syscon);
return syscon->regmap;
}
@@ -110,17 +174,6 @@
}
EXPORT_SYMBOL_GPL(syscon_regmap_lookup_by_phandle);
-static const struct of_device_id of_syscon_match[] = {
- { .compatible = "syscon", },
- { },
-};
-
-static struct regmap_config syscon_regmap_config = {
- .reg_bits = 32,
- .val_bits = 32,
- .reg_stride = 4,
-};
-
static int syscon_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -167,7 +220,6 @@
.driver = {
.name = "syscon",
.owner = THIS_MODULE,
- .of_match_table = of_syscon_match,
},
.probe = syscon_probe,
.id_table = syscon_ids,
diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c
index 9e04a74..439d905 100644
--- a/drivers/mfd/t7l66xb.c
+++ b/drivers/mfd/t7l66xb.c
@@ -87,7 +87,7 @@
unsigned long flags;
u8 dev_ctl;
- clk_enable(t7l66xb->clk32k);
+ clk_prepare_enable(t7l66xb->clk32k);
spin_lock_irqsave(&t7l66xb->lock, flags);
@@ -118,7 +118,7 @@
spin_unlock_irqrestore(&t7l66xb->lock, flags);
- clk_disable(t7l66xb->clk32k);
+ clk_disable_unprepare(t7l66xb->clk32k);
return 0;
}
@@ -285,7 +285,7 @@
if (pdata && pdata->suspend)
pdata->suspend(dev);
- clk_disable(t7l66xb->clk48m);
+ clk_disable_unprepare(t7l66xb->clk48m);
return 0;
}
@@ -295,7 +295,7 @@
struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
struct t7l66xb_platform_data *pdata = dev_get_platdata(&dev->dev);
- clk_enable(t7l66xb->clk48m);
+ clk_prepare_enable(t7l66xb->clk48m);
if (pdata && pdata->resume)
pdata->resume(dev);
@@ -369,7 +369,7 @@
goto err_ioremap;
}
- clk_enable(t7l66xb->clk48m);
+ clk_prepare_enable(t7l66xb->clk48m);
if (pdata && pdata->enable)
pdata->enable(dev);
@@ -414,9 +414,9 @@
int ret;
ret = pdata->disable(dev);
- clk_disable(t7l66xb->clk48m);
+ clk_disable_unprepare(t7l66xb->clk48m);
clk_put(t7l66xb->clk48m);
- clk_disable(t7l66xb->clk32k);
+ clk_disable_unprepare(t7l66xb->clk32k);
clk_put(t7l66xb->clk32k);
t7l66xb_detach_irq(dev);
iounmap(t7l66xb->scr);
diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c
index 0072e66..aacb372 100644
--- a/drivers/mfd/tc3589x.c
+++ b/drivers/mfd/tc3589x.c
@@ -241,10 +241,8 @@
static int tc3589x_irq_init(struct tc3589x *tc3589x, struct device_node *np)
{
- int base = tc3589x->irq_base;
-
tc3589x->domain = irq_domain_add_simple(
- np, TC3589x_NR_INTERNAL_IRQS, base,
+ np, TC3589x_NR_INTERNAL_IRQS, 0,
&tc3589x_irq_ops, tc3589x);
if (!tc3589x->domain) {
@@ -298,7 +296,7 @@
if (blocks & TC3589x_BLOCK_GPIO) {
ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_gpio,
ARRAY_SIZE(tc3589x_dev_gpio), NULL,
- tc3589x->irq_base, tc3589x->domain);
+ 0, tc3589x->domain);
if (ret) {
dev_err(tc3589x->dev, "failed to add gpio child\n");
return ret;
@@ -309,7 +307,7 @@
if (blocks & TC3589x_BLOCK_KEYPAD) {
ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_keypad,
ARRAY_SIZE(tc3589x_dev_keypad), NULL,
- tc3589x->irq_base, tc3589x->domain);
+ 0, tc3589x->domain);
if (ret) {
dev_err(tc3589x->dev, "failed to keypad child\n");
return ret;
@@ -404,7 +402,6 @@
tc3589x->dev = &i2c->dev;
tc3589x->i2c = i2c;
tc3589x->pdata = pdata;
- tc3589x->irq_base = pdata->irq_base;
switch (version) {
case TC3589X_TC35893:
diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c
index e71f880..85fab37 100644
--- a/drivers/mfd/tc6387xb.c
+++ b/drivers/mfd/tc6387xb.c
@@ -52,7 +52,7 @@
if (pdata && pdata->suspend)
pdata->suspend(dev);
- clk_disable(tc6387xb->clk32k);
+ clk_disable_unprepare(tc6387xb->clk32k);
return 0;
}
@@ -62,7 +62,7 @@
struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
struct tc6387xb_platform_data *pdata = dev_get_platdata(&dev->dev);
- clk_enable(tc6387xb->clk32k);
+ clk_prepare_enable(tc6387xb->clk32k);
if (pdata && pdata->resume)
pdata->resume(dev);
@@ -100,7 +100,7 @@
struct platform_device *dev = to_platform_device(mmc->dev.parent);
struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
- clk_enable(tc6387xb->clk32k);
+ clk_prepare_enable(tc6387xb->clk32k);
tmio_core_mmc_enable(tc6387xb->scr + 0x200, 0,
tc6387xb_mmc_resources[0].start & 0xfffe);
@@ -113,7 +113,7 @@
struct platform_device *dev = to_platform_device(mmc->dev.parent);
struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
- clk_disable(tc6387xb->clk32k);
+ clk_disable_unprepare(tc6387xb->clk32k);
return 0;
}
@@ -214,7 +214,7 @@
mfd_remove_devices(&dev->dev);
iounmap(tc6387xb->scr);
release_resource(&tc6387xb->rscr);
- clk_disable(tc6387xb->clk32k);
+ clk_disable_unprepare(tc6387xb->clk32k);
clk_put(tc6387xb->clk32k);
kfree(tc6387xb);
diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
index 4fac16b..d35f11f 100644
--- a/drivers/mfd/tc6393xb.c
+++ b/drivers/mfd/tc6393xb.c
@@ -263,6 +263,17 @@
return 0;
}
+static int tc6393xb_ohci_suspend(struct platform_device *dev)
+{
+ struct tc6393xb_platform_data *tcpd = dev_get_platdata(dev->dev.parent);
+
+ /* We can't properly store/restore OHCI state, so fail here */
+ if (tcpd->resume_restore)
+ return -EBUSY;
+
+ return tc6393xb_ohci_disable(dev);
+}
+
static int tc6393xb_fb_enable(struct platform_device *dev)
{
struct tc6393xb *tc6393xb = dev_get_drvdata(dev->dev.parent);
@@ -403,7 +414,7 @@
.num_resources = ARRAY_SIZE(tc6393xb_ohci_resources),
.resources = tc6393xb_ohci_resources,
.enable = tc6393xb_ohci_enable,
- .suspend = tc6393xb_ohci_disable,
+ .suspend = tc6393xb_ohci_suspend,
.resume = tc6393xb_ohci_enable,
.disable = tc6393xb_ohci_disable,
},
@@ -654,7 +665,7 @@
goto err_ioremap;
}
- ret = clk_enable(tc6393xb->clk);
+ ret = clk_prepare_enable(tc6393xb->clk);
if (ret)
goto err_clk_enable;
@@ -717,7 +728,7 @@
gpiochip_remove(&tc6393xb->gpio);
tcpd->disable(dev);
err_enable:
- clk_disable(tc6393xb->clk);
+ clk_disable_unprepare(tc6393xb->clk);
err_clk_enable:
iounmap(tc6393xb->scr);
err_ioremap:
@@ -748,7 +759,7 @@
gpiochip_remove(&tc6393xb->gpio);
ret = tcpd->disable(dev);
- clk_disable(tc6393xb->clk);
+ clk_disable_unprepare(tc6393xb->clk);
iounmap(tc6393xb->scr);
release_resource(&tc6393xb->rscr);
clk_put(tc6393xb->clk);
@@ -776,7 +787,7 @@
ioread8(tc6393xb->scr + SCR_GPI_BCR(i));
}
ret = tcpd->suspend(dev);
- clk_disable(tc6393xb->clk);
+ clk_disable_unprepare(tc6393xb->clk);
return ret;
}
@@ -788,7 +799,7 @@
int ret;
int i;
- clk_enable(tc6393xb->clk);
+ clk_prepare_enable(tc6393xb->clk);
ret = tcpd->resume(dev);
if (ret)
diff --git a/drivers/mfd/tps65090.c b/drivers/mfd/tps65090.c
index 1c3e6e2..14b62e1 100644
--- a/drivers/mfd/tps65090.c
+++ b/drivers/mfd/tps65090.c
@@ -76,58 +76,58 @@
static const struct regmap_irq tps65090_irqs[] = {
/* INT1 IRQs*/
[TPS65090_IRQ_VAC_STATUS_CHANGE] = {
- .mask = TPS65090_INT1_MASK_VAC_STATUS_CHANGE,
+ .mask = TPS65090_INT1_MASK_VAC_STATUS_CHANGE,
},
[TPS65090_IRQ_VSYS_STATUS_CHANGE] = {
- .mask = TPS65090_INT1_MASK_VSYS_STATUS_CHANGE,
+ .mask = TPS65090_INT1_MASK_VSYS_STATUS_CHANGE,
},
[TPS65090_IRQ_BAT_STATUS_CHANGE] = {
- .mask = TPS65090_INT1_MASK_BAT_STATUS_CHANGE,
+ .mask = TPS65090_INT1_MASK_BAT_STATUS_CHANGE,
},
[TPS65090_IRQ_CHARGING_STATUS_CHANGE] = {
- .mask = TPS65090_INT1_MASK_CHARGING_STATUS_CHANGE,
+ .mask = TPS65090_INT1_MASK_CHARGING_STATUS_CHANGE,
},
[TPS65090_IRQ_CHARGING_COMPLETE] = {
- .mask = TPS65090_INT1_MASK_CHARGING_COMPLETE,
+ .mask = TPS65090_INT1_MASK_CHARGING_COMPLETE,
},
[TPS65090_IRQ_OVERLOAD_DCDC1] = {
- .mask = TPS65090_INT1_MASK_OVERLOAD_DCDC1,
+ .mask = TPS65090_INT1_MASK_OVERLOAD_DCDC1,
},
[TPS65090_IRQ_OVERLOAD_DCDC2] = {
- .mask = TPS65090_INT1_MASK_OVERLOAD_DCDC2,
+ .mask = TPS65090_INT1_MASK_OVERLOAD_DCDC2,
},
/* INT2 IRQs*/
[TPS65090_IRQ_OVERLOAD_DCDC3] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_DCDC3,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_DCDC3,
},
[TPS65090_IRQ_OVERLOAD_FET1] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET1,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET1,
},
[TPS65090_IRQ_OVERLOAD_FET2] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET2,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET2,
},
[TPS65090_IRQ_OVERLOAD_FET3] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET3,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET3,
},
[TPS65090_IRQ_OVERLOAD_FET4] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET4,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET4,
},
[TPS65090_IRQ_OVERLOAD_FET5] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET5,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET5,
},
[TPS65090_IRQ_OVERLOAD_FET6] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET6,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET6,
},
[TPS65090_IRQ_OVERLOAD_FET7] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET7,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET7,
},
};
@@ -176,7 +176,7 @@
#endif
static int tps65090_i2c_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+ const struct i2c_device_id *id)
{
struct tps65090_platform_data *pdata = dev_get_platdata(&client->dev);
int irq_base = 0;
@@ -210,11 +210,11 @@
if (client->irq) {
ret = regmap_add_irq_chip(tps65090->rmap, client->irq,
- IRQF_ONESHOT | IRQF_TRIGGER_LOW, irq_base,
- &tps65090_irq_chip, &tps65090->irq_data);
- if (ret) {
- dev_err(&client->dev,
- "IRQ init failed with err: %d\n", ret);
+ IRQF_ONESHOT | IRQF_TRIGGER_LOW, irq_base,
+ &tps65090_irq_chip, &tps65090->irq_data);
+ if (ret) {
+ dev_err(&client->dev,
+ "IRQ init failed with err: %d\n", ret);
return ret;
}
} else {
@@ -223,8 +223,8 @@
}
ret = mfd_add_devices(tps65090->dev, -1, tps65090s,
- ARRAY_SIZE(tps65090s), NULL,
- 0, regmap_irq_get_domain(tps65090->irq_data));
+ ARRAY_SIZE(tps65090s), NULL,
+ 0, regmap_irq_get_domain(tps65090->irq_data));
if (ret) {
dev_err(&client->dev, "add mfd devices failed with err: %d\n",
ret);
diff --git a/drivers/mfd/tps65217.c b/drivers/mfd/tps65217.c
index a8ee52c..80a919a 100644
--- a/drivers/mfd/tps65217.c
+++ b/drivers/mfd/tps65217.c
@@ -33,9 +33,11 @@
static const struct mfd_cell tps65217s[] = {
{
.name = "tps65217-pmic",
+ .of_compatible = "ti,tps65217-pmic",
},
{
.name = "tps65217-bl",
+ .of_compatible = "ti,tps65217-bl",
},
};
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
index 50f9091..7d63e32 100644
--- a/drivers/mfd/twl4030-power.c
+++ b/drivers/mfd/twl4030-power.c
@@ -831,6 +831,9 @@
static struct of_device_id twl4030_power_of_match[] = {
{
+ .compatible = "ti,twl4030-power",
+ },
+ {
.compatible = "ti,twl4030-power-reset",
.data = &omap3_reset,
},
diff --git a/drivers/mfd/viperboard.c b/drivers/mfd/viperboard.c
index 3c2b8f9..e6b3c70 100644
--- a/drivers/mfd/viperboard.c
+++ b/drivers/mfd/viperboard.c
@@ -93,9 +93,8 @@
version >> 8, version & 0xff,
vb->usb_dev->bus->busnum, vb->usb_dev->devnum);
- ret = mfd_add_devices(&interface->dev, PLATFORM_DEVID_AUTO,
- vprbrd_devs, ARRAY_SIZE(vprbrd_devs), NULL, 0,
- NULL);
+ ret = mfd_add_hotplug_devices(&interface->dev, vprbrd_devs,
+ ARRAY_SIZE(vprbrd_devs));
if (ret != 0) {
dev_err(&interface->dev, "Failed to add mfd devices to core.");
goto error;
diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c
index d6f35bb..b326a82 100644
--- a/drivers/mfd/wm5102-tables.c
+++ b/drivers/mfd/wm5102-tables.c
@@ -336,8 +336,6 @@
{ 0x00000218, 0x01A6 }, /* R536 - Mic Bias Ctrl 1 */
{ 0x00000219, 0x01A6 }, /* R537 - Mic Bias Ctrl 2 */
{ 0x0000021A, 0x01A6 }, /* R538 - Mic Bias Ctrl 3 */
- { 0x00000225, 0x0400 }, /* R549 - HP Ctrl 1L */
- { 0x00000226, 0x0400 }, /* R550 - HP Ctrl 1R */
{ 0x00000293, 0x0000 }, /* R659 - Accessory Detect Mode 1 */
{ 0x0000029B, 0x0020 }, /* R667 - Headphone Detect 1 */
{ 0x0000029C, 0x0000 }, /* R668 - Headphone Detect 2 */
@@ -1112,6 +1110,8 @@
case ARIZONA_MIC_BIAS_CTRL_1:
case ARIZONA_MIC_BIAS_CTRL_2:
case ARIZONA_MIC_BIAS_CTRL_3:
+ case ARIZONA_HP_CTRL_1L:
+ case ARIZONA_HP_CTRL_1R:
case ARIZONA_ACCESSORY_DETECT_MODE_1:
case ARIZONA_HEADPHONE_DETECT_1:
case ARIZONA_HEADPHONE_DETECT_2:
@@ -1949,6 +1949,8 @@
case ARIZONA_DSP1_SCRATCH_1:
case ARIZONA_DSP1_SCRATCH_2:
case ARIZONA_DSP1_SCRATCH_3:
+ case ARIZONA_HP_CTRL_1L:
+ case ARIZONA_HP_CTRL_1R:
case ARIZONA_HEADPHONE_DETECT_2:
case ARIZONA_HP_DACVAL:
case ARIZONA_MIC_DETECT_3:
diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c
index 4642b5b..12cad94 100644
--- a/drivers/mfd/wm5110-tables.c
+++ b/drivers/mfd/wm5110-tables.c
@@ -895,8 +895,16 @@
{ 0x00000548, 0x1818 }, /* R1352 - AIF2 Frame Ctrl 2 */
{ 0x00000549, 0x0000 }, /* R1353 - AIF2 Frame Ctrl 3 */
{ 0x0000054A, 0x0001 }, /* R1354 - AIF2 Frame Ctrl 4 */
+ { 0x0000054B, 0x0002 }, /* R1355 - AIF2 Frame Ctrl 5 */
+ { 0x0000054C, 0x0003 }, /* R1356 - AIF2 Frame Ctrl 6 */
+ { 0x0000054D, 0x0004 }, /* R1357 - AIF2 Frame Ctrl 7 */
+ { 0x0000054E, 0x0005 }, /* R1358 - AIF2 Frame Ctrl 8 */
{ 0x00000551, 0x0000 }, /* R1361 - AIF2 Frame Ctrl 11 */
{ 0x00000552, 0x0001 }, /* R1362 - AIF2 Frame Ctrl 12 */
+ { 0x00000553, 0x0002 }, /* R1363 - AIF2 Frame Ctrl 13 */
+ { 0x00000554, 0x0003 }, /* R1364 - AIF2 Frame Ctrl 14 */
+ { 0x00000555, 0x0004 }, /* R1365 - AIF2 Frame Ctrl 15 */
+ { 0x00000556, 0x0005 }, /* R1366 - AIF2 Frame Ctrl 16 */
{ 0x00000559, 0x0000 }, /* R1369 - AIF2 Tx Enables */
{ 0x0000055A, 0x0000 }, /* R1370 - AIF2 Rx Enables */
{ 0x00000580, 0x000C }, /* R1408 - AIF3 BCLK Ctrl */
@@ -1790,6 +1798,8 @@
case ARIZONA_MIC_BIAS_CTRL_1:
case ARIZONA_MIC_BIAS_CTRL_2:
case ARIZONA_MIC_BIAS_CTRL_3:
+ case ARIZONA_HP_CTRL_1L:
+ case ARIZONA_HP_CTRL_1R:
case ARIZONA_ACCESSORY_DETECT_MODE_1:
case ARIZONA_HEADPHONE_DETECT_1:
case ARIZONA_HEADPHONE_DETECT_2:
@@ -1934,8 +1944,16 @@
case ARIZONA_AIF2_FRAME_CTRL_2:
case ARIZONA_AIF2_FRAME_CTRL_3:
case ARIZONA_AIF2_FRAME_CTRL_4:
+ case ARIZONA_AIF2_FRAME_CTRL_5:
+ case ARIZONA_AIF2_FRAME_CTRL_6:
+ case ARIZONA_AIF2_FRAME_CTRL_7:
+ case ARIZONA_AIF2_FRAME_CTRL_8:
case ARIZONA_AIF2_FRAME_CTRL_11:
case ARIZONA_AIF2_FRAME_CTRL_12:
+ case ARIZONA_AIF2_FRAME_CTRL_13:
+ case ARIZONA_AIF2_FRAME_CTRL_14:
+ case ARIZONA_AIF2_FRAME_CTRL_15:
+ case ARIZONA_AIF2_FRAME_CTRL_16:
case ARIZONA_AIF2_TX_ENABLES:
case ARIZONA_AIF2_RX_ENABLES:
case ARIZONA_AIF3_BCLK_CTRL:
@@ -2825,6 +2843,8 @@
case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS:
case ARIZONA_ASYNC_SAMPLE_RATE_2_STATUS:
case ARIZONA_MIC_DETECT_3:
+ case ARIZONA_HP_CTRL_1L:
+ case ARIZONA_HP_CTRL_1R:
case ARIZONA_HEADPHONE_DETECT_2:
case ARIZONA_INPUT_ENABLES_STATUS:
case ARIZONA_OUTPUT_STATUS_1:
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index 4ab527f..f5124a8 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -308,7 +308,7 @@
goto err;
}
- mode = id2 & WM8350_CONF_STS_MASK >> 10;
+ mode = (id2 & WM8350_CONF_STS_MASK) >> 10;
cust_id = id2 & WM8350_CUST_ID_MASK;
chip_rev = (id2 & WM8350_CHIP_REV_MASK) >> 12;
dev_info(wm8350->dev,
diff --git a/drivers/mfd/wm8997-tables.c b/drivers/mfd/wm8997-tables.c
index 510da3b..c0c25d75 100644
--- a/drivers/mfd/wm8997-tables.c
+++ b/drivers/mfd/wm8997-tables.c
@@ -670,6 +670,7 @@
{ 0x00000C23, 0x0000 }, /* R3107 - Misc Pad Ctrl 4 */
{ 0x00000C24, 0x0000 }, /* R3108 - Misc Pad Ctrl 5 */
{ 0x00000D08, 0xFFFF }, /* R3336 - Interrupt Status 1 Mask */
+ { 0x00000D09, 0xFFFF }, /* R3337 - Interrupt Status 2 Mask */
{ 0x00000D0A, 0xFFFF }, /* R3338 - Interrupt Status 3 Mask */
{ 0x00000D0B, 0xFFFF }, /* R3339 - Interrupt Status 4 Mask */
{ 0x00000D0C, 0xFEFF }, /* R3340 - Interrupt Status 5 Mask */
@@ -886,6 +887,8 @@
case ARIZONA_MIC_BIAS_CTRL_1:
case ARIZONA_MIC_BIAS_CTRL_2:
case ARIZONA_MIC_BIAS_CTRL_3:
+ case ARIZONA_HP_CTRL_1L:
+ case ARIZONA_HP_CTRL_1R:
case ARIZONA_ACCESSORY_DETECT_MODE_1:
case ARIZONA_HEADPHONE_DETECT_1:
case ARIZONA_HEADPHONE_DETECT_2:
@@ -1328,6 +1331,7 @@
case ARIZONA_INTERRUPT_STATUS_4:
case ARIZONA_INTERRUPT_STATUS_5:
case ARIZONA_INTERRUPT_STATUS_1_MASK:
+ case ARIZONA_INTERRUPT_STATUS_2_MASK:
case ARIZONA_INTERRUPT_STATUS_3_MASK:
case ARIZONA_INTERRUPT_STATUS_4_MASK:
case ARIZONA_INTERRUPT_STATUS_5_MASK:
@@ -1477,6 +1481,8 @@
case ARIZONA_SAMPLE_RATE_3_STATUS:
case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS:
case ARIZONA_MIC_DETECT_3:
+ case ARIZONA_HP_CTRL_1L:
+ case ARIZONA_HP_CTRL_1R:
case ARIZONA_HEADPHONE_DETECT_2:
case ARIZONA_INPUT_ENABLES_STATUS:
case ARIZONA_OUTPUT_STATUS_1:
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 1fa4c80..4409d79 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -78,13 +78,16 @@
/*
* We've only got one major, so number of mmcblk devices is
- * limited to 256 / number of minors per device.
+ * limited to (1 << 20) / number of minors per device. It is also
+ * currently limited by the size of the static bitmaps below.
*/
static int max_devices;
-/* 256 minors, so at most 256 separate devices */
-static DECLARE_BITMAP(dev_use, 256);
-static DECLARE_BITMAP(name_use, 256);
+#define MAX_DEVICES 256
+
+/* TODO: Replace these with struct ida */
+static DECLARE_BITMAP(dev_use, MAX_DEVICES);
+static DECLARE_BITMAP(name_use, MAX_DEVICES);
/*
* There is one mmc_blk_data per slot.
@@ -112,7 +115,7 @@
/*
* Only set in main mmc_blk_data associated
- * with mmc_card with mmc_set_drvdata, and keeps
+ * with mmc_card with dev_set_drvdata, and keeps
* track of the current selected device partition.
*/
unsigned int part_curr;
@@ -260,7 +263,7 @@
int ret;
struct mmc_blk_data *md = mmc_blk_get(dev_to_disk(dev));
- ret = snprintf(buf, PAGE_SIZE, "%d",
+ ret = snprintf(buf, PAGE_SIZE, "%d\n",
get_disk_ro(dev_to_disk(dev)) ^
md->read_only);
mmc_blk_put(md);
@@ -642,7 +645,7 @@
struct mmc_blk_data *md)
{
int ret;
- struct mmc_blk_data *main_md = mmc_get_drvdata(card);
+ struct mmc_blk_data *main_md = dev_get_drvdata(&card->dev);
if (main_md->part_curr == md->part_type)
return 0;
@@ -1004,7 +1007,8 @@
err = mmc_hw_reset(host);
/* Ensure we switch back to the correct partition */
if (err != -EOPNOTSUPP) {
- struct mmc_blk_data *main_md = mmc_get_drvdata(host->card);
+ struct mmc_blk_data *main_md =
+ dev_get_drvdata(&host->card->dev);
int part_err;
main_md->part_curr = main_md->part_type;
@@ -1308,19 +1312,11 @@
}
if (status & R1_EXCEPTION_EVENT) {
- ext_csd = kzalloc(512, GFP_KERNEL);
- if (!ext_csd) {
- pr_err("%s: unable to allocate buffer for ext_csd\n",
- req->rq_disk->disk_name);
- return -ENOMEM;
- }
-
- err = mmc_send_ext_csd(card, ext_csd);
+ err = mmc_get_ext_csd(card, &ext_csd);
if (err) {
pr_err("%s: error %d sending ext_csd\n",
req->rq_disk->disk_name, err);
- check = MMC_BLK_ABORT;
- goto free;
+ return MMC_BLK_ABORT;
}
if ((ext_csd[EXT_CSD_EXP_EVENTS_STATUS] &
@@ -1338,7 +1334,6 @@
req->rq_disk->disk_name, packed->nr_entries,
packed->blocks, packed->idx_failure);
}
-free:
kfree(ext_csd);
}
@@ -2093,7 +2088,7 @@
/*
* !subname implies we are creating main mmc_blk_data that will be
- * associated with mmc_card with mmc_set_drvdata. Due to device
+ * associated with mmc_card with dev_set_drvdata. Due to device
* partitions, devidx will not coincide with a per-physical card
* index anymore so we keep track of a name index.
*/
@@ -2425,8 +2420,9 @@
END_FIXUP
};
-static int mmc_blk_probe(struct mmc_card *card)
+static int mmc_blk_probe(struct device *dev)
{
+ struct mmc_card *card = mmc_dev_to_card(dev);
struct mmc_blk_data *md, *part_md;
char cap_str[10];
@@ -2451,7 +2447,7 @@
if (mmc_blk_alloc_parts(card, md))
goto out;
- mmc_set_drvdata(card, md);
+ dev_set_drvdata(dev, md);
if (mmc_add_disk(md))
goto out;
@@ -2481,9 +2477,10 @@
return 0;
}
-static void mmc_blk_remove(struct mmc_card *card)
+static int mmc_blk_remove(struct device *dev)
{
- struct mmc_blk_data *md = mmc_get_drvdata(card);
+ struct mmc_card *card = mmc_dev_to_card(dev);
+ struct mmc_blk_data *md = dev_get_drvdata(dev);
mmc_blk_remove_parts(card, md);
pm_runtime_get_sync(&card->dev);
@@ -2494,13 +2491,15 @@
pm_runtime_disable(&card->dev);
pm_runtime_put_noidle(&card->dev);
mmc_blk_remove_req(md);
- mmc_set_drvdata(card, NULL);
+ dev_set_drvdata(dev, NULL);
+
+ return 0;
}
-static int _mmc_blk_suspend(struct mmc_card *card)
+static int _mmc_blk_suspend(struct device *dev)
{
struct mmc_blk_data *part_md;
- struct mmc_blk_data *md = mmc_get_drvdata(card);
+ struct mmc_blk_data *md = dev_get_drvdata(dev);
if (md) {
mmc_queue_suspend(&md->queue);
@@ -2511,21 +2510,21 @@
return 0;
}
-static void mmc_blk_shutdown(struct mmc_card *card)
+static void mmc_blk_shutdown(struct device *dev)
{
- _mmc_blk_suspend(card);
+ _mmc_blk_suspend(dev);
}
-#ifdef CONFIG_PM
-static int mmc_blk_suspend(struct mmc_card *card)
+#ifdef CONFIG_PM_SLEEP
+static int mmc_blk_suspend(struct device *dev)
{
- return _mmc_blk_suspend(card);
+ return _mmc_blk_suspend(dev);
}
-static int mmc_blk_resume(struct mmc_card *card)
+static int mmc_blk_resume(struct device *dev)
{
struct mmc_blk_data *part_md;
- struct mmc_blk_data *md = mmc_get_drvdata(card);
+ struct mmc_blk_data *md = dev_get_drvdata(dev);
if (md) {
/*
@@ -2540,19 +2539,15 @@
}
return 0;
}
-#else
-#define mmc_blk_suspend NULL
-#define mmc_blk_resume NULL
#endif
-static struct mmc_driver mmc_driver = {
- .drv = {
- .name = "mmcblk",
- },
+static SIMPLE_DEV_PM_OPS(mmc_blk_pm_ops, mmc_blk_suspend, mmc_blk_resume);
+
+static struct device_driver mmc_driver = {
+ .name = "mmcblk",
+ .pm = &mmc_blk_pm_ops,
.probe = mmc_blk_probe,
.remove = mmc_blk_remove,
- .suspend = mmc_blk_suspend,
- .resume = mmc_blk_resume,
.shutdown = mmc_blk_shutdown,
};
@@ -2563,7 +2558,7 @@
if (perdev_minors != CONFIG_MMC_BLOCK_MINORS)
pr_info("mmcblk: using %d minors per device\n", perdev_minors);
- max_devices = 256 / perdev_minors;
+ max_devices = min(MAX_DEVICES, (1 << MINORBITS) / perdev_minors);
res = register_blkdev(MMC_BLOCK_MAJOR, "mmc");
if (res)
diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index 0c0fc52..0a7430f 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -14,6 +14,7 @@
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
#include <linux/slab.h>
+#include <linux/device.h>
#include <linux/scatterlist.h>
#include <linux/swap.h> /* For nr_free_buffer_pages() */
@@ -32,6 +33,8 @@
#define BUFFER_ORDER 2
#define BUFFER_SIZE (PAGE_SIZE << BUFFER_ORDER)
+#define TEST_ALIGN_END 8
+
/*
* Limit the test area size to the maximum MMC HC erase group size. Note that
* the maximum SD allocation unit size is just 4MiB.
@@ -1174,7 +1177,7 @@
int ret, i;
struct scatterlist sg;
- for (i = 1;i < 4;i++) {
+ for (i = 1; i < TEST_ALIGN_END; i++) {
sg_init_one(&sg, test->buffer + i, 512);
ret = mmc_test_transfer(test, &sg, 1, 0, 1, 512, 1);
if (ret)
@@ -1189,7 +1192,7 @@
int ret, i;
struct scatterlist sg;
- for (i = 1;i < 4;i++) {
+ for (i = 1; i < TEST_ALIGN_END; i++) {
sg_init_one(&sg, test->buffer + i, 512);
ret = mmc_test_transfer(test, &sg, 1, 0, 1, 512, 0);
if (ret)
@@ -1216,7 +1219,7 @@
if (size < 1024)
return RESULT_UNSUP_HOST;
- for (i = 1;i < 4;i++) {
+ for (i = 1; i < TEST_ALIGN_END; i++) {
sg_init_one(&sg, test->buffer + i, size);
ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 1);
if (ret)
@@ -1243,7 +1246,7 @@
if (size < 1024)
return RESULT_UNSUP_HOST;
- for (i = 1;i < 4;i++) {
+ for (i = 1; i < TEST_ALIGN_END; i++) {
sg_init_one(&sg, test->buffer + i, size);
ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 0);
if (ret)
@@ -2997,8 +3000,9 @@
return ret;
}
-static int mmc_test_probe(struct mmc_card *card)
+static int mmc_test_probe(struct device *dev)
{
+ struct mmc_card *card = mmc_dev_to_card(dev);
int ret;
if (!mmc_card_mmc(card) && !mmc_card_sd(card))
@@ -3013,20 +3017,22 @@
return 0;
}
-static void mmc_test_remove(struct mmc_card *card)
+static int mmc_test_remove(struct device *dev)
{
+ struct mmc_card *card = mmc_dev_to_card(dev);
+
mmc_test_free_result(card);
mmc_test_free_dbgfs_file(card);
+
+ return 0;
}
-static void mmc_test_shutdown(struct mmc_card *card)
+static void mmc_test_shutdown(struct device *dev)
{
}
-static struct mmc_driver mmc_driver = {
- .drv = {
- .name = "mmc_test",
- },
+static struct device_driver mmc_driver = {
+ .name = "mmc_test",
.probe = mmc_test_probe,
.remove = mmc_test_remove,
.shutdown = mmc_test_shutdown,
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index cfa6110..236d194 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -232,13 +232,15 @@
if (!mqrq_cur->bounce_buf) {
pr_warn("%s: unable to allocate bounce cur buffer\n",
mmc_card_name(card));
- }
- mqrq_prev->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
- if (!mqrq_prev->bounce_buf) {
- pr_warn("%s: unable to allocate bounce prev buffer\n",
- mmc_card_name(card));
- kfree(mqrq_cur->bounce_buf);
- mqrq_cur->bounce_buf = NULL;
+ } else {
+ mqrq_prev->bounce_buf =
+ kmalloc(bouncesz, GFP_KERNEL);
+ if (!mqrq_prev->bounce_buf) {
+ pr_warn("%s: unable to allocate bounce prev buffer\n",
+ mmc_card_name(card));
+ kfree(mqrq_cur->bounce_buf);
+ mqrq_cur->bounce_buf = NULL;
+ }
}
}
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 8a1f124..5ca562c 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -25,8 +25,6 @@
#include "sdio_cis.h"
#include "bus.h"
-#define to_mmc_driver(d) container_of(d, struct mmc_driver, drv)
-
static ssize_t type_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -106,33 +104,14 @@
return retval;
}
-static int mmc_bus_probe(struct device *dev)
-{
- struct mmc_driver *drv = to_mmc_driver(dev->driver);
- struct mmc_card *card = mmc_dev_to_card(dev);
-
- return drv->probe(card);
-}
-
-static int mmc_bus_remove(struct device *dev)
-{
- struct mmc_driver *drv = to_mmc_driver(dev->driver);
- struct mmc_card *card = mmc_dev_to_card(dev);
-
- drv->remove(card);
-
- return 0;
-}
-
static void mmc_bus_shutdown(struct device *dev)
{
- struct mmc_driver *drv = to_mmc_driver(dev->driver);
struct mmc_card *card = mmc_dev_to_card(dev);
struct mmc_host *host = card->host;
int ret;
- if (dev->driver && drv->shutdown)
- drv->shutdown(card);
+ if (dev->driver && dev->driver->shutdown)
+ dev->driver->shutdown(dev);
if (host->bus_ops->shutdown) {
ret = host->bus_ops->shutdown(host);
@@ -145,16 +124,13 @@
#ifdef CONFIG_PM_SLEEP
static int mmc_bus_suspend(struct device *dev)
{
- struct mmc_driver *drv = to_mmc_driver(dev->driver);
struct mmc_card *card = mmc_dev_to_card(dev);
struct mmc_host *host = card->host;
int ret;
- if (dev->driver && drv->suspend) {
- ret = drv->suspend(card);
- if (ret)
- return ret;
- }
+ ret = pm_generic_suspend(dev);
+ if (ret)
+ return ret;
ret = host->bus_ops->suspend(host);
return ret;
@@ -162,7 +138,6 @@
static int mmc_bus_resume(struct device *dev)
{
- struct mmc_driver *drv = to_mmc_driver(dev->driver);
struct mmc_card *card = mmc_dev_to_card(dev);
struct mmc_host *host = card->host;
int ret;
@@ -172,9 +147,7 @@
pr_warn("%s: error %d during resume (card was removed?)\n",
mmc_hostname(host), ret);
- if (dev->driver && drv->resume)
- ret = drv->resume(card);
-
+ ret = pm_generic_resume(dev);
return ret;
}
#endif
@@ -207,8 +180,6 @@
.dev_groups = mmc_dev_groups,
.match = mmc_bus_match,
.uevent = mmc_bus_uevent,
- .probe = mmc_bus_probe,
- .remove = mmc_bus_remove,
.shutdown = mmc_bus_shutdown,
.pm = &mmc_bus_pm_ops,
};
@@ -227,24 +198,22 @@
* mmc_register_driver - register a media driver
* @drv: MMC media driver
*/
-int mmc_register_driver(struct mmc_driver *drv)
+int mmc_register_driver(struct device_driver *drv)
{
- drv->drv.bus = &mmc_bus_type;
- return driver_register(&drv->drv);
+ drv->bus = &mmc_bus_type;
+ return driver_register(drv);
}
-
EXPORT_SYMBOL(mmc_register_driver);
/**
* mmc_unregister_driver - unregister a media driver
* @drv: MMC media driver
*/
-void mmc_unregister_driver(struct mmc_driver *drv)
+void mmc_unregister_driver(struct device_driver *drv)
{
- drv->drv.bus = &mmc_bus_type;
- driver_unregister(&drv->drv);
+ drv->bus = &mmc_bus_type;
+ driver_unregister(drv);
}
-
EXPORT_SYMBOL(mmc_unregister_driver);
static void mmc_release_card(struct device *dev)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index f26a5f1..9584bff 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -149,6 +149,14 @@
led_trigger_event(host->led, LED_OFF);
+ if (mrq->sbc) {
+ pr_debug("%s: req done <CMD%u>: %d: %08x %08x %08x %08x\n",
+ mmc_hostname(host), mrq->sbc->opcode,
+ mrq->sbc->error,
+ mrq->sbc->resp[0], mrq->sbc->resp[1],
+ mrq->sbc->resp[2], mrq->sbc->resp[3]);
+ }
+
pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
mmc_hostname(host), cmd->opcode, err,
cmd->resp[0], cmd->resp[1],
@@ -214,6 +222,10 @@
mrq->cmd->error = 0;
mrq->cmd->mrq = mrq;
+ if (mrq->sbc) {
+ mrq->sbc->error = 0;
+ mrq->sbc->mrq = mrq;
+ }
if (mrq->data) {
BUG_ON(mrq->data->blksz > host->max_blk_size);
BUG_ON(mrq->data->blocks > host->max_blk_count);
@@ -538,8 +550,18 @@
if (host->card && mmc_card_mmc(host->card) &&
((mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1) ||
(mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1B)) &&
- (host->areq->mrq->cmd->resp[0] & R1_EXCEPTION_EVENT))
+ (host->areq->mrq->cmd->resp[0] & R1_EXCEPTION_EVENT)) {
+
+ /* Cancel the prepared request */
+ if (areq)
+ mmc_post_req(host, areq->mrq, -EINVAL);
+
mmc_start_bkops(host->card, true);
+
+ /* prepare the request again */
+ if (areq)
+ mmc_pre_req(host, areq->mrq, !host->areq);
+ }
}
if (!err && areq)
@@ -709,27 +731,16 @@
int err;
u8 *ext_csd;
- /*
- * In future work, we should consider storing the entire ext_csd.
- */
- ext_csd = kmalloc(512, GFP_KERNEL);
- if (!ext_csd) {
- pr_err("%s: could not allocate buffer to receive the ext_csd.\n",
- mmc_hostname(card->host));
- return -ENOMEM;
- }
-
mmc_claim_host(card->host);
- err = mmc_send_ext_csd(card, ext_csd);
+ err = mmc_get_ext_csd(card, &ext_csd);
mmc_release_host(card->host);
if (err)
- goto out;
+ return err;
card->ext_csd.raw_bkops_status = ext_csd[EXT_CSD_BKOPS_STATUS];
card->ext_csd.raw_exception_status = ext_csd[EXT_CSD_EXP_EVENTS_STATUS];
-out:
kfree(ext_csd);
- return err;
+ return 0;
}
EXPORT_SYMBOL(mmc_read_bkops_status);
@@ -1088,6 +1099,22 @@
mmc_host_clk_release(host);
}
+/*
+ * Set initial state after a power cycle or a hw_reset.
+ */
+void mmc_set_initial_state(struct mmc_host *host)
+{
+ if (mmc_host_is_spi(host))
+ host->ios.chip_select = MMC_CS_HIGH;
+ else
+ host->ios.chip_select = MMC_CS_DONTCARE;
+ host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
+ host->ios.bus_width = MMC_BUS_WIDTH_1;
+ host->ios.timing = MMC_TIMING_LEGACY;
+
+ mmc_set_ios(host);
+}
+
/**
* mmc_vdd_to_ocrbitnum - Convert a voltage to the OCR bit number
* @vdd: voltage (mV)
@@ -1420,18 +1447,20 @@
pr_warn("%s: cannot verify signal voltage switch\n",
mmc_hostname(host));
+ mmc_host_clk_hold(host);
+
cmd.opcode = SD_SWITCH_VOLTAGE;
cmd.arg = 0;
cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
err = mmc_wait_for_cmd(host, &cmd, 0);
if (err)
- return err;
+ goto err_command;
- if (!mmc_host_is_spi(host) && (cmd.resp[0] & R1_ERROR))
- return -EIO;
-
- mmc_host_clk_hold(host);
+ if (!mmc_host_is_spi(host) && (cmd.resp[0] & R1_ERROR)) {
+ err = -EIO;
+ goto err_command;
+ }
/*
* The card should drive cmd and dat[0:3] low immediately
* after the response of cmd11, but wait 1 ms to be sure
@@ -1480,6 +1509,7 @@
mmc_power_cycle(host, ocr);
}
+err_command:
mmc_host_clk_release(host);
return err;
@@ -1526,15 +1556,9 @@
mmc_host_clk_hold(host);
host->ios.vdd = fls(ocr) - 1;
- if (mmc_host_is_spi(host))
- host->ios.chip_select = MMC_CS_HIGH;
- else
- host->ios.chip_select = MMC_CS_DONTCARE;
- host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
host->ios.power_mode = MMC_POWER_UP;
- host->ios.bus_width = MMC_BUS_WIDTH_1;
- host->ios.timing = MMC_TIMING_LEGACY;
- mmc_set_ios(host);
+ /* Set initial state and call mmc_set_ios */
+ mmc_set_initial_state(host);
/* Try to set signal voltage to 3.3V but fall back to 1.8v or 1.2v */
if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330) == 0)
@@ -1574,14 +1598,9 @@
host->ios.clock = 0;
host->ios.vdd = 0;
- if (!mmc_host_is_spi(host)) {
- host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
- host->ios.chip_select = MMC_CS_DONTCARE;
- }
host->ios.power_mode = MMC_POWER_OFF;
- host->ios.bus_width = MMC_BUS_WIDTH_1;
- host->ios.timing = MMC_TIMING_LEGACY;
- mmc_set_ios(host);
+ /* Set initial state and call mmc_set_ios */
+ mmc_set_initial_state(host);
/*
* Some configurations, such as the 802.11 SDIO card in the OLPC
@@ -2259,30 +2278,16 @@
/* If the reset has happened, then a status command will fail */
if (check) {
- struct mmc_command cmd = {0};
- int err;
+ u32 status;
- cmd.opcode = MMC_SEND_STATUS;
- if (!mmc_host_is_spi(card->host))
- cmd.arg = card->rca << 16;
- cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
- err = mmc_wait_for_cmd(card->host, &cmd, 0);
- if (!err) {
+ if (!mmc_send_status(card, &status)) {
mmc_host_clk_release(host);
return -ENOSYS;
}
}
- if (mmc_host_is_spi(host)) {
- host->ios.chip_select = MMC_CS_HIGH;
- host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
- } else {
- host->ios.chip_select = MMC_CS_DONTCARE;
- host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
- }
- host->ios.bus_width = MMC_BUS_WIDTH_1;
- host->ios.timing = MMC_TIMING_LEGACY;
- mmc_set_ios(host);
+ /* Set initial state and call mmc_set_ios */
+ mmc_set_initial_state(host);
mmc_host_clk_release(host);
diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
index 443a584..d76597c 100644
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -49,6 +49,7 @@
void mmc_power_up(struct mmc_host *host, u32 ocr);
void mmc_power_off(struct mmc_host *host);
void mmc_power_cycle(struct mmc_host *host, u32 ocr);
+void mmc_set_initial_state(struct mmc_host *host);
static inline void mmc_delay(unsigned int ms)
{
diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c
index 91eb162..e914210 100644
--- a/drivers/mmc/core/debugfs.c
+++ b/drivers/mmc/core/debugfs.c
@@ -291,14 +291,8 @@
if (!buf)
return -ENOMEM;
- ext_csd = kmalloc(512, GFP_KERNEL);
- if (!ext_csd) {
- err = -ENOMEM;
- goto out_free;
- }
-
mmc_get_card(card);
- err = mmc_send_ext_csd(card, ext_csd);
+ err = mmc_get_ext_csd(card, &ext_csd);
mmc_put_card(card);
if (err)
goto out_free;
@@ -314,7 +308,6 @@
out_free:
kfree(buf);
- kfree(ext_csd);
return err;
}
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index a301a78..02ad792 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -177,65 +177,6 @@
return 0;
}
-/*
- * Read extended CSD.
- */
-static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
-{
- int err;
- u8 *ext_csd;
-
- BUG_ON(!card);
- BUG_ON(!new_ext_csd);
-
- *new_ext_csd = NULL;
-
- if (card->csd.mmca_vsn < CSD_SPEC_VER_4)
- return 0;
-
- /*
- * As the ext_csd is so large and mostly unused, we don't store the
- * raw block in mmc_card.
- */
- ext_csd = kmalloc(512, GFP_KERNEL);
- if (!ext_csd) {
- pr_err("%s: could not allocate a buffer to "
- "receive the ext_csd.\n", mmc_hostname(card->host));
- return -ENOMEM;
- }
-
- err = mmc_send_ext_csd(card, ext_csd);
- if (err) {
- kfree(ext_csd);
- *new_ext_csd = NULL;
-
- /* If the host or the card can't do the switch,
- * fail more gracefully. */
- if ((err != -EINVAL)
- && (err != -ENOSYS)
- && (err != -EFAULT))
- return err;
-
- /*
- * High capacity cards should have this "magic" size
- * stored in their CSD.
- */
- if (card->csd.capacity == (4096 * 512)) {
- pr_err("%s: unable to read EXT_CSD "
- "on a possible high capacity card. "
- "Card will be ignored.\n",
- mmc_hostname(card->host));
- } else {
- pr_warn("%s: unable to read EXT_CSD, performance might suffer\n",
- mmc_hostname(card->host));
- err = 0;
- }
- } else
- *new_ext_csd = ext_csd;
-
- return err;
-}
-
static void mmc_select_card_type(struct mmc_card *card)
{
struct mmc_host *host = card->host;
@@ -391,16 +332,11 @@
/*
* Decode extended CSD.
*/
-static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
+static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd)
{
int err = 0, idx;
unsigned int part_size;
- BUG_ON(!card);
-
- if (!ext_csd)
- return 0;
-
/* Version is coded in the CSD_STRUCTURE byte in the EXT_CSD register */
card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE];
if (card->csd.structure == 3) {
@@ -628,15 +564,55 @@
card->ext_csd.data_sector_size = 512;
}
+ /* eMMC v5 or later */
+ if (card->ext_csd.rev >= 7) {
+ memcpy(card->ext_csd.fwrev, &ext_csd[EXT_CSD_FIRMWARE_VERSION],
+ MMC_FIRMWARE_LEN);
+ card->ext_csd.ffu_capable =
+ (ext_csd[EXT_CSD_SUPPORTED_MODE] & 0x1) &&
+ !(ext_csd[EXT_CSD_FW_CONFIG] & 0x1);
+ }
out:
return err;
}
-static inline void mmc_free_ext_csd(u8 *ext_csd)
+static int mmc_read_ext_csd(struct mmc_card *card)
{
- kfree(ext_csd);
-}
+ u8 *ext_csd;
+ int err;
+ if (!mmc_can_ext_csd(card))
+ return 0;
+
+ err = mmc_get_ext_csd(card, &ext_csd);
+ if (err) {
+ /* If the host or the card can't do the switch,
+ * fail more gracefully. */
+ if ((err != -EINVAL)
+ && (err != -ENOSYS)
+ && (err != -EFAULT))
+ return err;
+
+ /*
+ * High capacity cards should have this "magic" size
+ * stored in their CSD.
+ */
+ if (card->csd.capacity == (4096 * 512)) {
+ pr_err("%s: unable to read EXT_CSD on a possible high capacity card. Card will be ignored.\n",
+ mmc_hostname(card->host));
+ } else {
+ pr_warn("%s: unable to read EXT_CSD, performance might suffer\n",
+ mmc_hostname(card->host));
+ err = 0;
+ }
+
+ return err;
+ }
+
+ err = mmc_decode_ext_csd(card, ext_csd);
+ kfree(ext_csd);
+ return err;
+}
static int mmc_compare_ext_csds(struct mmc_card *card, unsigned bus_width)
{
@@ -647,11 +623,8 @@
return 0;
err = mmc_get_ext_csd(card, &bw_ext_csd);
-
- if (err || bw_ext_csd == NULL) {
- err = -EINVAL;
- goto out;
- }
+ if (err)
+ return err;
/* only compare read only fields */
err = !((card->ext_csd.raw_partition_support ==
@@ -710,8 +683,7 @@
if (err)
err = -EINVAL;
-out:
- mmc_free_ext_csd(bw_ext_csd);
+ kfree(bw_ext_csd);
return err;
}
@@ -722,7 +694,7 @@
MMC_DEV_ATTR(date, "%02d/%04d\n", card->cid.month, card->cid.year);
MMC_DEV_ATTR(erase_size, "%u\n", card->erase_size << 9);
MMC_DEV_ATTR(preferred_erase_size, "%u\n", card->pref_erase << 9);
-MMC_DEV_ATTR(fwrev, "0x%x\n", card->cid.fwrev);
+MMC_DEV_ATTR(ffu_capable, "%d\n", card->ext_csd.ffu_capable);
MMC_DEV_ATTR(hwrev, "0x%x\n", card->cid.hwrev);
MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid);
MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name);
@@ -735,6 +707,22 @@
MMC_DEV_ATTR(raw_rpmb_size_mult, "%#x\n", card->ext_csd.raw_rpmb_size_mult);
MMC_DEV_ATTR(rel_sectors, "%#x\n", card->ext_csd.rel_sectors);
+static ssize_t mmc_fwrev_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct mmc_card *card = mmc_dev_to_card(dev);
+
+ if (card->ext_csd.rev < 7) {
+ return sprintf(buf, "0x%x\n", card->cid.fwrev);
+ } else {
+ return sprintf(buf, "0x%*phN\n", MMC_FIRMWARE_LEN,
+ card->ext_csd.fwrev);
+ }
+}
+
+static DEVICE_ATTR(fwrev, S_IRUGO, mmc_fwrev_show, NULL);
+
static struct attribute *mmc_std_attrs[] = {
&dev_attr_cid.attr,
&dev_attr_csd.attr,
@@ -742,6 +730,7 @@
&dev_attr_erase_size.attr,
&dev_attr_preferred_erase_size.attr,
&dev_attr_fwrev.attr,
+ &dev_attr_ffu_capable.attr,
&dev_attr_hwrev.attr,
&dev_attr_manfid.attr,
&dev_attr_name.attr,
@@ -774,14 +763,6 @@
unsigned int pwrclass_val = 0;
int err = 0;
- /* Power class selection is supported for versions >= 4.0 */
- if (card->csd.mmca_vsn < CSD_SPEC_VER_4)
- return 0;
-
- /* Power class values are defined only for 4/8 bit bus */
- if (bus_width == EXT_CSD_BUS_WIDTH_1)
- return 0;
-
switch (1 << host->ios.vdd) {
case MMC_VDD_165_195:
if (host->ios.clock <= MMC_HIGH_26_MAX_DTR)
@@ -844,7 +825,7 @@
int err, ddr;
/* Power class selection is supported for versions >= 4.0 */
- if (card->csd.mmca_vsn < CSD_SPEC_VER_4)
+ if (!mmc_can_ext_csd(card))
return 0;
bus_width = host->ios.bus_width;
@@ -905,7 +886,7 @@
unsigned idx, bus_width = 0;
int err = 0;
- if ((card->csd.mmca_vsn < CSD_SPEC_VER_4) &&
+ if (!mmc_can_ext_csd(card) &&
!(host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)))
return 0;
@@ -998,7 +979,7 @@
ext_csd_bits,
card->ext_csd.generic_cmd6_time);
if (err) {
- pr_warn("%s: switch to bus width %d ddr failed\n",
+ pr_err("%s: switch to bus width %d ddr failed\n",
mmc_hostname(host), 1 << bus_width);
return err;
}
@@ -1069,7 +1050,7 @@
card->ext_csd.generic_cmd6_time,
true, true, true);
if (err) {
- pr_warn("%s: switch to high-speed from hs200 failed, err:%d\n",
+ pr_err("%s: switch to high-speed from hs200 failed, err:%d\n",
mmc_hostname(host), err);
return err;
}
@@ -1079,7 +1060,7 @@
EXT_CSD_DDR_BUS_WIDTH_8,
card->ext_csd.generic_cmd6_time);
if (err) {
- pr_warn("%s: switch to bus width for hs400 failed, err:%d\n",
+ pr_err("%s: switch to bus width for hs400 failed, err:%d\n",
mmc_hostname(host), err);
return err;
}
@@ -1089,7 +1070,7 @@
card->ext_csd.generic_cmd6_time,
true, true, true);
if (err) {
- pr_warn("%s: switch to hs400 failed, err:%d\n",
+ pr_err("%s: switch to hs400 failed, err:%d\n",
mmc_hostname(host), err);
return err;
}
@@ -1146,8 +1127,7 @@
{
int err = 0;
- if ((card->csd.mmca_vsn < CSD_SPEC_VER_4 &&
- card->ext_csd.hs_max_dtr == 0))
+ if (!mmc_can_ext_csd(card))
goto bus_speed;
if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200)
@@ -1232,7 +1212,7 @@
mmc_host_clk_release(host);
if (err)
- pr_warn("%s: tuning execution failed\n",
+ pr_err("%s: tuning execution failed\n",
mmc_hostname(host));
}
@@ -1252,7 +1232,6 @@
int err;
u32 cid[4];
u32 rocr;
- u8 *ext_csd = NULL;
BUG_ON(!host);
WARN_ON(!host->claimed);
@@ -1361,14 +1340,8 @@
}
if (!oldcard) {
- /*
- * Fetch and process extended CSD.
- */
-
- err = mmc_get_ext_csd(card, &ext_csd);
- if (err)
- goto free_card;
- err = mmc_read_ext_csd(card, ext_csd);
+ /* Read extended CSD. */
+ err = mmc_read_ext_csd(card);
if (err)
goto free_card;
@@ -1458,18 +1431,18 @@
if (mmc_card_hs200(card)) {
err = mmc_hs200_tuning(card);
if (err)
- goto err;
+ goto free_card;
err = mmc_select_hs400(card);
if (err)
- goto err;
+ goto free_card;
} else if (mmc_card_hs(card)) {
/* Select the desired bus width optionally */
err = mmc_select_bus_width(card);
if (!IS_ERR_VALUE(err)) {
err = mmc_select_hs_ddr(card);
if (err)
- goto err;
+ goto free_card;
}
}
@@ -1545,15 +1518,12 @@
if (!oldcard)
host->card = card;
- mmc_free_ext_csd(ext_csd);
return 0;
free_card:
if (!oldcard)
mmc_remove_card(card);
err:
- mmc_free_ext_csd(ext_csd);
-
return err;
}
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 7911e05..3b044c5 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -264,20 +264,6 @@
struct mmc_command cmd = {0};
struct mmc_data data = {0};
struct scatterlist sg;
- void *data_buf;
- int is_on_stack;
-
- is_on_stack = object_is_on_stack(buf);
- if (is_on_stack) {
- /*
- * dma onto stack is unsafe/nonportable, but callers to this
- * routine normally provide temporary on-stack buffers ...
- */
- data_buf = kmalloc(len, GFP_KERNEL);
- if (!data_buf)
- return -ENOMEM;
- } else
- data_buf = buf;
mrq.cmd = &cmd;
mrq.data = &data;
@@ -298,7 +284,7 @@
data.sg = &sg;
data.sg_len = 1;
- sg_init_one(&sg, data_buf, len);
+ sg_init_one(&sg, buf, len);
if (opcode == MMC_SEND_CSD || opcode == MMC_SEND_CID) {
/*
@@ -312,11 +298,6 @@
mmc_wait_for_req(host, &mrq);
- if (is_on_stack) {
- memcpy(buf, data_buf, len);
- kfree(data_buf);
- }
-
if (cmd.error)
return cmd.error;
if (data.error)
@@ -334,7 +315,7 @@
return mmc_send_cxd_native(card->host, card->rca << 16,
csd, MMC_SEND_CSD);
- csd_tmp = kmalloc(16, GFP_KERNEL);
+ csd_tmp = kzalloc(16, GFP_KERNEL);
if (!csd_tmp)
return -ENOMEM;
@@ -362,7 +343,7 @@
cid, MMC_SEND_CID);
}
- cid_tmp = kmalloc(16, GFP_KERNEL);
+ cid_tmp = kzalloc(16, GFP_KERNEL);
if (!cid_tmp)
return -ENOMEM;
@@ -378,12 +359,35 @@
return ret;
}
-int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd)
+int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
{
- return mmc_send_cxd_data(card, card->host, MMC_SEND_EXT_CSD,
- ext_csd, 512);
+ int err;
+ u8 *ext_csd;
+
+ if (!card || !new_ext_csd)
+ return -EINVAL;
+
+ if (!mmc_can_ext_csd(card))
+ return -EOPNOTSUPP;
+
+ /*
+ * As the ext_csd is so large and mostly unused, we don't store the
+ * raw block in mmc_card.
+ */
+ ext_csd = kzalloc(512, GFP_KERNEL);
+ if (!ext_csd)
+ return -ENOMEM;
+
+ err = mmc_send_cxd_data(card, card->host, MMC_SEND_EXT_CSD, ext_csd,
+ 512);
+ if (err)
+ kfree(ext_csd);
+ else
+ *new_ext_csd = ext_csd;
+
+ return err;
}
-EXPORT_SYMBOL_GPL(mmc_send_ext_csd);
+EXPORT_SYMBOL_GPL(mmc_get_ext_csd);
int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp)
{
@@ -543,6 +547,75 @@
}
EXPORT_SYMBOL_GPL(mmc_switch);
+int mmc_send_tuning(struct mmc_host *host)
+{
+ struct mmc_request mrq = {NULL};
+ struct mmc_command cmd = {0};
+ struct mmc_data data = {0};
+ struct scatterlist sg;
+ struct mmc_ios *ios = &host->ios;
+ const u8 *tuning_block_pattern;
+ int size, err = 0;
+ u8 *data_buf;
+ u32 opcode;
+
+ if (ios->bus_width == MMC_BUS_WIDTH_8) {
+ tuning_block_pattern = tuning_blk_pattern_8bit;
+ size = sizeof(tuning_blk_pattern_8bit);
+ opcode = MMC_SEND_TUNING_BLOCK_HS200;
+ } else if (ios->bus_width == MMC_BUS_WIDTH_4) {
+ tuning_block_pattern = tuning_blk_pattern_4bit;
+ size = sizeof(tuning_blk_pattern_4bit);
+ opcode = MMC_SEND_TUNING_BLOCK;
+ } else
+ return -EINVAL;
+
+ data_buf = kzalloc(size, GFP_KERNEL);
+ if (!data_buf)
+ return -ENOMEM;
+
+ mrq.cmd = &cmd;
+ mrq.data = &data;
+
+ cmd.opcode = opcode;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+
+ data.blksz = size;
+ data.blocks = 1;
+ data.flags = MMC_DATA_READ;
+
+ /*
+ * According to the tuning specs, Tuning process
+ * is normally shorter 40 executions of CMD19,
+ * and timeout value should be shorter than 150 ms
+ */
+ data.timeout_ns = 150 * NSEC_PER_MSEC;
+
+ data.sg = &sg;
+ data.sg_len = 1;
+ sg_init_one(&sg, data_buf, size);
+
+ mmc_wait_for_req(host, &mrq);
+
+ if (cmd.error) {
+ err = cmd.error;
+ goto out;
+ }
+
+ if (data.error) {
+ err = data.error;
+ goto out;
+ }
+
+ if (memcmp(data_buf, tuning_block_pattern, size))
+ err = -EIO;
+
+out:
+ kfree(data_buf);
+ return err;
+}
+EXPORT_SYMBOL_GPL(mmc_send_tuning);
+
static int
mmc_send_bus_test(struct mmc_card *card, struct mmc_host *host, u8 opcode,
u8 len)
@@ -675,3 +748,8 @@
return 0;
}
+
+int mmc_can_ext_csd(struct mmc_card *card)
+{
+ return (card && card->csd.mmca_vsn > CSD_SPEC_VER_3);
+}
diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h
index 390dac6..6f4b00e 100644
--- a/drivers/mmc/core/mmc_ops.h
+++ b/drivers/mmc/core/mmc_ops.h
@@ -20,13 +20,13 @@
int mmc_all_send_cid(struct mmc_host *host, u32 *cid);
int mmc_set_relative_addr(struct mmc_card *card);
int mmc_send_csd(struct mmc_card *card, u32 *csd);
-int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd);
int mmc_send_status(struct mmc_card *card, u32 *status);
int mmc_send_cid(struct mmc_host *host, u32 *cid);
int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp);
int mmc_spi_set_crc(struct mmc_host *host, int use_crc);
int mmc_bus_test(struct mmc_card *card, u8 bus_width);
int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status);
+int mmc_can_ext_csd(struct mmc_card *card);
#endif
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 2439e71..fd0750b 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -980,8 +980,12 @@
if (mmc_card_is_removable(host) || !mmc_card_keep_power(host)) {
sdio_reset(host);
mmc_go_idle(host);
- err = mmc_sdio_init_card(host, host->card->ocr, host->card,
- mmc_card_keep_power(host));
+ mmc_send_if_cond(host, host->card->ocr);
+ err = mmc_send_io_op_cond(host, 0, NULL);
+ if (!err)
+ err = mmc_sdio_init_card(host, host->card->ocr,
+ host->card,
+ mmc_card_keep_power(host));
} else if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
/* We may have switched to 1-bit mode during suspend */
err = sdio_enable_4bit_bus(host->card);
@@ -1035,7 +1039,7 @@
sdio_reset(host);
mmc_go_idle(host);
- mmc_send_if_cond(host, host->ocr_avail);
+ mmc_send_if_cond(host, host->card->ocr);
ret = mmc_send_io_op_cond(host, 0, NULL);
if (ret)
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index 6da97b1..6088531 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -26,6 +26,8 @@
#include "sdio_cis.h"
#include "sdio_bus.h"
+#define to_sdio_driver(d) container_of(d, struct sdio_driver, drv)
+
/* show configuration fields */
#define sdio_config_attr(field, format_string) \
static ssize_t \
@@ -196,8 +198,6 @@
return ret;
}
-#ifdef CONFIG_PM
-
static const struct dev_pm_ops sdio_bus_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(pm_generic_suspend, pm_generic_resume)
SET_RUNTIME_PM_OPS(
@@ -207,14 +207,6 @@
)
};
-#define SDIO_PM_OPS_PTR (&sdio_bus_pm_ops)
-
-#else /* !CONFIG_PM */
-
-#define SDIO_PM_OPS_PTR NULL
-
-#endif /* !CONFIG_PM */
-
static struct bus_type sdio_bus_type = {
.name = "sdio",
.dev_groups = sdio_dev_groups,
@@ -222,7 +214,7 @@
.uevent = sdio_bus_uevent,
.probe = sdio_bus_probe,
.remove = sdio_bus_remove,
- .pm = SDIO_PM_OPS_PTR,
+ .pm = &sdio_bus_pm_ops,
};
int sdio_register_bus(void)
@@ -295,7 +287,7 @@
static void sdio_acpi_set_handle(struct sdio_func *func)
{
struct mmc_host *host = func->card->host;
- u64 addr = (host->slotno << 16) | func->num;
+ u64 addr = ((u64)host->slotno << 16) | func->num;
acpi_preset_companion(&func->dev, ACPI_COMPANION(host->parent), addr);
}
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 1386065..2d6fbdd 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -580,7 +580,7 @@
config MMC_DW
tristate "Synopsys DesignWare Memory Card Interface"
depends on HAS_DMA
- depends on ARC || ARM || MIPS || COMPILE_TEST
+ depends on ARC || ARM || ARM64 || MIPS || COMPILE_TEST
help
This selects support for the Synopsys DesignWare Mobile Storage IP
block, this provides host support for SD and MMC interfaces, in both
@@ -748,3 +748,8 @@
help
This selects support for the SD/MMC Host Controller on
Allwinner sunxi SoCs.
+
+config MMC_TOSHIBA_PCI
+ tristate "Toshiba Type A SD/MMC Card Interface Driver"
+ depends on PCI
+ help
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index b09ecfb..f7b0a77 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -55,6 +55,7 @@
obj-$(CONFIG_MMC_MOXART) += moxart-mmc.o
obj-$(CONFIG_MMC_SUNXI) += sunxi-mmc.o
obj-$(CONFIG_MMC_USDHI6ROL0) += usdhi6rol0.o
+obj-$(CONFIG_MMC_TOSHIBA_PCI) += toshsd.o
obj-$(CONFIG_MMC_REALTEK_PCI) += rtsx_pci_sdmmc.o
obj-$(CONFIG_MMC_REALTEK_USB) += rtsx_usb_sdmmc.o
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 77250d4..62aba9a 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -30,13 +30,16 @@
#include <linux/stat.h>
#include <linux/types.h>
#include <linux/platform_data/atmel.h>
+#include <linux/platform_data/mmc-atmel-mci.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sdio.h>
-#include <mach/atmel-mci.h>
#include <linux/atmel-mci.h>
#include <linux/atmel_pdc.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/pinctrl/consumer.h>
#include <asm/cacheflush.h>
#include <asm/io.h>
@@ -44,6 +47,8 @@
#include "atmel-mci-regs.h"
+#define AUTOSUSPEND_DELAY 50
+
#define ATMCI_DATA_ERROR_FLAGS (ATMCI_DCRCE | ATMCI_DTOE | ATMCI_OVRE | ATMCI_UNRE)
#define ATMCI_DMA_THRESHOLD 16
@@ -386,20 +391,19 @@
if (!buf)
return -ENOMEM;
+ pm_runtime_get_sync(&host->pdev->dev);
+
/*
* Grab a more or less consistent snapshot. Note that we're
* not disabling interrupts, so IMR and SR may not be
* consistent.
*/
- ret = clk_prepare_enable(host->mck);
- if (ret)
- goto out;
-
spin_lock_bh(&host->lock);
memcpy_fromio(buf, host->regs, ATMCI_REGS_SIZE);
spin_unlock_bh(&host->lock);
- clk_disable_unprepare(host->mck);
+ pm_runtime_mark_last_busy(&host->pdev->dev);
+ pm_runtime_put_autosuspend(&host->pdev->dev);
seq_printf(s, "MR:\t0x%08x%s%s ",
buf[ATMCI_MR / 4],
@@ -449,7 +453,6 @@
val & ATMCI_CFG_LSYNC ? " LSYNC" : "");
}
-out:
kfree(buf);
return ret;
@@ -560,6 +563,9 @@
pdata->slot[slot_id].detect_is_active_high =
of_property_read_bool(cnp, "cd-inverted");
+ pdata->slot[slot_id].non_removable =
+ of_property_read_bool(cnp, "non-removable");
+
pdata->slot[slot_id].wp_pin =
of_get_named_gpio(cnp, "wp-gpios", 0);
}
@@ -1252,6 +1258,8 @@
WARN_ON(slot->mrq);
dev_dbg(&host->pdev->dev, "MRQ: cmd %u\n", mrq->cmd->opcode);
+ pm_runtime_get_sync(&host->pdev->dev);
+
/*
* We may "know" the card is gone even though there's still an
* electrical connection. If so, we really need to communicate
@@ -1281,7 +1289,8 @@
struct atmel_mci_slot *slot = mmc_priv(mmc);
struct atmel_mci *host = slot->host;
unsigned int i;
- bool unprepare_clk;
+
+ pm_runtime_get_sync(&host->pdev->dev);
slot->sdc_reg &= ~ATMCI_SDCBUS_MASK;
switch (ios->bus_width) {
@@ -1297,13 +1306,8 @@
unsigned int clock_min = ~0U;
u32 clkdiv;
- clk_prepare(host->mck);
- unprepare_clk = true;
-
spin_lock_bh(&host->lock);
if (!host->mode_reg) {
- clk_enable(host->mck);
- unprepare_clk = false;
atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
if (host->caps.has_cfg_reg)
@@ -1371,8 +1375,6 @@
} else {
bool any_slot_active = false;
- unprepare_clk = false;
-
spin_lock_bh(&host->lock);
slot->clock = 0;
for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
@@ -1385,17 +1387,12 @@
atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
if (host->mode_reg) {
atmci_readl(host, ATMCI_MR);
- clk_disable(host->mck);
- unprepare_clk = true;
}
host->mode_reg = 0;
}
spin_unlock_bh(&host->lock);
}
- if (unprepare_clk)
- clk_unprepare(host->mck);
-
switch (ios->power_mode) {
case MMC_POWER_OFF:
if (!IS_ERR(mmc->supply.vmmc))
@@ -1421,6 +1418,9 @@
*/
break;
}
+
+ pm_runtime_mark_last_busy(&host->pdev->dev);
+ pm_runtime_put_autosuspend(&host->pdev->dev);
}
static int atmci_get_ro(struct mmc_host *mmc)
@@ -1512,6 +1512,9 @@
spin_unlock(&host->lock);
mmc_request_done(prev_mmc, mrq);
spin_lock(&host->lock);
+
+ pm_runtime_mark_last_busy(&host->pdev->dev);
+ pm_runtime_put_autosuspend(&host->pdev->dev);
}
static void atmci_command_complete(struct atmel_mci *host,
@@ -2137,7 +2140,7 @@
return IRQ_HANDLED;
}
-static int __init atmci_init_slot(struct atmel_mci *host,
+static int atmci_init_slot(struct atmel_mci *host,
struct mci_slot_pdata *slot_data, unsigned int id,
u32 sdc_reg, u32 sdio_irq)
{
@@ -2206,8 +2209,12 @@
}
}
- if (!gpio_is_valid(slot->detect_pin))
- mmc->caps |= MMC_CAP_NEEDS_POLL;
+ if (!gpio_is_valid(slot->detect_pin)) {
+ if (slot_data->non_removable)
+ mmc->caps |= MMC_CAP_NONREMOVABLE;
+ else
+ mmc->caps |= MMC_CAP_NEEDS_POLL;
+ }
if (gpio_is_valid(slot->wp_pin)) {
if (devm_gpio_request(&host->pdev->dev, slot->wp_pin,
@@ -2265,55 +2272,25 @@
mmc_free_host(slot->mmc);
}
-static bool atmci_filter(struct dma_chan *chan, void *pdata)
+static int atmci_configure_dma(struct atmel_mci *host)
{
- struct mci_platform_data *sl_pdata = pdata;
- struct mci_dma_data *sl;
+ host->dma.chan = dma_request_slave_channel_reason(&host->pdev->dev,
+ "rxtx");
+ if (IS_ERR(host->dma.chan))
+ return PTR_ERR(host->dma.chan);
- if (!sl_pdata)
- return false;
+ dev_info(&host->pdev->dev, "using %s for DMA transfers\n",
+ dma_chan_name(host->dma.chan));
- sl = sl_pdata->dma_slave;
- if (sl && find_slave_dev(sl) == chan->device->dev) {
- chan->private = slave_data_ptr(sl);
- return true;
- } else {
- return false;
- }
-}
+ host->dma_conf.src_addr = host->mapbase + ATMCI_RDR;
+ host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_conf.src_maxburst = 1;
+ host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR;
+ host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_conf.dst_maxburst = 1;
+ host->dma_conf.device_fc = false;
-static bool atmci_configure_dma(struct atmel_mci *host)
-{
- struct mci_platform_data *pdata;
- dma_cap_mask_t mask;
-
- if (host == NULL)
- return false;
-
- pdata = host->pdev->dev.platform_data;
-
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-
- host->dma.chan = dma_request_slave_channel_compat(mask, atmci_filter, pdata,
- &host->pdev->dev, "rxtx");
- if (!host->dma.chan) {
- dev_warn(&host->pdev->dev, "no DMA channel available\n");
- return false;
- } else {
- dev_info(&host->pdev->dev,
- "using %s for DMA transfers\n",
- dma_chan_name(host->dma.chan));
-
- host->dma_conf.src_addr = host->mapbase + ATMCI_RDR;
- host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- host->dma_conf.src_maxburst = 1;
- host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR;
- host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- host->dma_conf.dst_maxburst = 1;
- host->dma_conf.device_fc = false;
- return true;
- }
+ return 0;
}
/*
@@ -2321,7 +2298,7 @@
* HSMCI provides DMA support and a new config register but no more supports
* PDC.
*/
-static void __init atmci_get_cap(struct atmel_mci *host)
+static void atmci_get_cap(struct atmel_mci *host)
{
unsigned int version;
@@ -2370,7 +2347,7 @@
}
}
-static int __init atmci_probe(struct platform_device *pdev)
+static int atmci_probe(struct platform_device *pdev)
{
struct mci_platform_data *pdata;
struct atmel_mci *host;
@@ -2417,19 +2394,23 @@
atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
host->bus_hz = clk_get_rate(host->mck);
- clk_disable_unprepare(host->mck);
host->mapbase = regs->start;
tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)host);
ret = request_irq(irq, atmci_interrupt, 0, dev_name(&pdev->dev), host);
- if (ret)
+ if (ret) {
+ clk_disable_unprepare(host->mck);
return ret;
+ }
/* Get MCI capabilities and set operations according to it */
atmci_get_cap(host);
- if (atmci_configure_dma(host)) {
+ ret = atmci_configure_dma(host);
+ if (ret == -EPROBE_DEFER)
+ goto err_dma_probe_defer;
+ if (ret == 0) {
host->prepare_data = &atmci_prepare_data_dma;
host->submit_data = &atmci_submit_data_dma;
host->stop_transfer = &atmci_stop_transfer_dma;
@@ -2449,6 +2430,12 @@
setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host);
+ pm_runtime_get_noresume(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_DELAY);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
/* We need at least one slot to succeed */
nr_slots = 0;
ret = -ENODEV;
@@ -2491,6 +2478,9 @@
"Atmel MCI controller at 0x%08lx irq %d, %u slots\n",
host->mapbase, irq, nr_slots);
+ pm_runtime_mark_last_busy(&host->pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
+
return 0;
err_dma_alloc:
@@ -2499,18 +2489,26 @@
atmci_cleanup_slot(host->slot[i], i);
}
err_init_slot:
+ clk_disable_unprepare(host->mck);
+
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
+
del_timer_sync(&host->timer);
- if (host->dma.chan)
+ if (!IS_ERR(host->dma.chan))
dma_release_channel(host->dma.chan);
+err_dma_probe_defer:
free_irq(irq, host);
return ret;
}
-static int __exit atmci_remove(struct platform_device *pdev)
+static int atmci_remove(struct platform_device *pdev)
{
struct atmel_mci *host = platform_get_drvdata(pdev);
unsigned int i;
+ pm_runtime_get_sync(&pdev->dev);
+
if (host->buffer)
dma_free_coherent(&pdev->dev, host->buf_size,
host->buffer, host->buf_phys_addr);
@@ -2520,41 +2518,62 @@
atmci_cleanup_slot(host->slot[i], i);
}
- clk_prepare_enable(host->mck);
atmci_writel(host, ATMCI_IDR, ~0UL);
atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
atmci_readl(host, ATMCI_SR);
- clk_disable_unprepare(host->mck);
del_timer_sync(&host->timer);
- if (host->dma.chan)
+ if (!IS_ERR(host->dma.chan))
dma_release_channel(host->dma.chan);
free_irq(platform_get_irq(pdev, 0), host);
+ clk_disable_unprepare(host->mck);
+
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
+
return 0;
}
+#ifdef CONFIG_PM
+static int atmci_runtime_suspend(struct device *dev)
+{
+ struct atmel_mci *host = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(host->mck);
+
+ pinctrl_pm_select_sleep_state(dev);
+
+ return 0;
+}
+
+static int atmci_runtime_resume(struct device *dev)
+{
+ struct atmel_mci *host = dev_get_drvdata(dev);
+
+ pinctrl_pm_select_default_state(dev);
+
+ return clk_prepare_enable(host->mck);
+}
+#endif
+
+static const struct dev_pm_ops atmci_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+ SET_PM_RUNTIME_PM_OPS(atmci_runtime_suspend, atmci_runtime_resume, NULL)
+};
+
static struct platform_driver atmci_driver = {
- .remove = __exit_p(atmci_remove),
+ .probe = atmci_probe,
+ .remove = atmci_remove,
.driver = {
.name = "atmel_mci",
.of_match_table = of_match_ptr(atmci_dt_ids),
+ .pm = &atmci_dev_pm_ops,
},
};
-
-static int __init atmci_init(void)
-{
- return platform_driver_probe(&atmci_driver, atmci_probe);
-}
-
-static void __exit atmci_exit(void)
-{
- platform_driver_unregister(&atmci_driver);
-}
-
-late_initcall(atmci_init); /* try to load after dma driver when built-in */
-module_exit(atmci_exit);
+module_platform_driver(atmci_driver);
MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c
index 0fbc53a..509365c 100644
--- a/drivers/mmc/host/dw_mmc-exynos.c
+++ b/drivers/mmc/host/dw_mmc-exynos.c
@@ -25,6 +25,7 @@
#define NUM_PINS(x) (x + 2)
#define SDMMC_CLKSEL 0x09C
+#define SDMMC_CLKSEL64 0x0A8
#define SDMMC_CLKSEL_CCLK_SAMPLE(x) (((x) & 7) << 0)
#define SDMMC_CLKSEL_CCLK_DRIVE(x) (((x) & 7) << 16)
#define SDMMC_CLKSEL_CCLK_DIVIDER(x) (((x) & 7) << 24)
@@ -65,6 +66,8 @@
DW_MCI_TYPE_EXYNOS5250,
DW_MCI_TYPE_EXYNOS5420,
DW_MCI_TYPE_EXYNOS5420_SMU,
+ DW_MCI_TYPE_EXYNOS7,
+ DW_MCI_TYPE_EXYNOS7_SMU,
};
/* Exynos implementation specific driver private data */
@@ -95,6 +98,12 @@
}, {
.compatible = "samsung,exynos5420-dw-mshc-smu",
.ctrl_type = DW_MCI_TYPE_EXYNOS5420_SMU,
+ }, {
+ .compatible = "samsung,exynos7-dw-mshc",
+ .ctrl_type = DW_MCI_TYPE_EXYNOS7,
+ }, {
+ .compatible = "samsung,exynos7-dw-mshc-smu",
+ .ctrl_type = DW_MCI_TYPE_EXYNOS7_SMU,
},
};
@@ -102,7 +111,8 @@
{
struct dw_mci_exynos_priv_data *priv = host->priv;
- if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS5420_SMU) {
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS5420_SMU ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) {
mci_writel(host, MPSBEGIN0, 0);
mci_writel(host, MPSEND0, DWMCI_BLOCK_NUM);
mci_writel(host, MPSCTRL0, DWMCI_MPSCTRL_SECURE_WRITE_BIT |
@@ -153,11 +163,22 @@
static int dw_mci_exynos_resume_noirq(struct device *dev)
{
struct dw_mci *host = dev_get_drvdata(dev);
+ struct dw_mci_exynos_priv_data *priv = host->priv;
u32 clksel;
- clksel = mci_readl(host, CLKSEL);
- if (clksel & SDMMC_CLKSEL_WAKEUP_INT)
- mci_writel(host, CLKSEL, clksel);
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ clksel = mci_readl(host, CLKSEL64);
+ else
+ clksel = mci_readl(host, CLKSEL);
+
+ if (clksel & SDMMC_CLKSEL_WAKEUP_INT) {
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ mci_writel(host, CLKSEL64, clksel);
+ else
+ mci_writel(host, CLKSEL, clksel);
+ }
return 0;
}
@@ -169,6 +190,7 @@
static void dw_mci_exynos_prepare_command(struct dw_mci *host, u32 *cmdr)
{
+ struct dw_mci_exynos_priv_data *priv = host->priv;
/*
* Exynos4412 and Exynos5250 extends the use of CMD register with the
* use of bit 29 (which is reserved on standard MSHC controllers) for
@@ -176,8 +198,14 @@
* HOLD register should be bypassed in case there is no phase shift
* applied on CMD/DATA that is sent to the card.
*/
- if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL)))
- *cmdr |= SDMMC_CMD_USE_HOLD_REG;
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) {
+ if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL64)))
+ *cmdr |= SDMMC_CMD_USE_HOLD_REG;
+ } else {
+ if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL)))
+ *cmdr |= SDMMC_CMD_USE_HOLD_REG;
+ }
}
static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios)
@@ -188,12 +216,20 @@
u8 div = priv->ciu_div + 1;
if (ios->timing == MMC_TIMING_MMC_DDR52) {
- mci_writel(host, CLKSEL, priv->ddr_timing);
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ mci_writel(host, CLKSEL64, priv->ddr_timing);
+ else
+ mci_writel(host, CLKSEL, priv->ddr_timing);
/* Should be double rate for DDR mode */
if (ios->bus_width == MMC_BUS_WIDTH_8)
wanted <<= 1;
} else {
- mci_writel(host, CLKSEL, priv->sdr_timing);
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ mci_writel(host, CLKSEL64, priv->sdr_timing);
+ else
+ mci_writel(host, CLKSEL, priv->sdr_timing);
}
/* Don't care if wanted clock is zero */
@@ -265,26 +301,51 @@
static inline u8 dw_mci_exynos_get_clksmpl(struct dw_mci *host)
{
- return SDMMC_CLKSEL_CCLK_SAMPLE(mci_readl(host, CLKSEL));
+ struct dw_mci_exynos_priv_data *priv = host->priv;
+
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ return SDMMC_CLKSEL_CCLK_SAMPLE(mci_readl(host, CLKSEL64));
+ else
+ return SDMMC_CLKSEL_CCLK_SAMPLE(mci_readl(host, CLKSEL));
}
static inline void dw_mci_exynos_set_clksmpl(struct dw_mci *host, u8 sample)
{
u32 clksel;
- clksel = mci_readl(host, CLKSEL);
+ struct dw_mci_exynos_priv_data *priv = host->priv;
+
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ clksel = mci_readl(host, CLKSEL64);
+ else
+ clksel = mci_readl(host, CLKSEL);
clksel = (clksel & ~0x7) | SDMMC_CLKSEL_CCLK_SAMPLE(sample);
- mci_writel(host, CLKSEL, clksel);
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ mci_writel(host, CLKSEL64, clksel);
+ else
+ mci_writel(host, CLKSEL, clksel);
}
static inline u8 dw_mci_exynos_move_next_clksmpl(struct dw_mci *host)
{
+ struct dw_mci_exynos_priv_data *priv = host->priv;
u32 clksel;
u8 sample;
- clksel = mci_readl(host, CLKSEL);
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ clksel = mci_readl(host, CLKSEL64);
+ else
+ clksel = mci_readl(host, CLKSEL);
sample = (clksel + 1) & 0x7;
clksel = (clksel & ~0x7) | sample;
- mci_writel(host, CLKSEL, clksel);
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ mci_writel(host, CLKSEL64, clksel);
+ else
+ mci_writel(host, CLKSEL, clksel);
return sample;
}
@@ -411,6 +472,10 @@
.data = &exynos_drv_data, },
{ .compatible = "samsung,exynos5420-dw-mshc-smu",
.data = &exynos_drv_data, },
+ { .compatible = "samsung,exynos7-dw-mshc",
+ .data = &exynos_drv_data, },
+ { .compatible = "samsung,exynos7-dw-mshc-smu",
+ .data = &exynos_drv_data, },
{},
};
MODULE_DEVICE_TABLE(of, dw_mci_exynos_match);
diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
index 8b65721..ec6dbcd 100644
--- a/drivers/mmc/host/dw_mmc-pltfm.c
+++ b/drivers/mmc/host/dw_mmc-pltfm.c
@@ -35,6 +35,10 @@
.prepare_command = dw_mci_pltfm_prepare_command,
};
+static const struct dw_mci_drv_data pistachio_drv_data = {
+ .prepare_command = dw_mci_pltfm_prepare_command,
+};
+
int dw_mci_pltfm_register(struct platform_device *pdev,
const struct dw_mci_drv_data *drv_data)
{
@@ -90,6 +94,8 @@
{ .compatible = "snps,dw-mshc", },
{ .compatible = "altr,socfpga-dw-mshc",
.data = &socfpga_drv_data },
+ { .compatible = "img,pistachio-dw-mshc",
+ .data = &pistachio_drv_data },
{},
};
MODULE_DEVICE_TABLE(of, dw_mci_pltfm_match);
diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
index f0c2cb1..5650ac4 100644
--- a/drivers/mmc/host/dw_mmc-rockchip.c
+++ b/drivers/mmc/host/dw_mmc-rockchip.c
@@ -37,6 +37,9 @@
unsigned int cclkin;
u32 bus_hz;
+ if (ios->clock == 0)
+ return;
+
/*
* cclkin: source clock of mmc controller
* bus_hz: card interface clock generated by CLKGEN
@@ -65,14 +68,24 @@
}
}
+static int dw_mci_rockchip_init(struct dw_mci *host)
+{
+ /* It is slot 8 on Rockchip SoCs */
+ host->sdio_id0 = 8;
+
+ return 0;
+}
+
static const struct dw_mci_drv_data rk2928_drv_data = {
.prepare_command = dw_mci_rockchip_prepare_command,
+ .init = dw_mci_rockchip_init,
};
static const struct dw_mci_drv_data rk3288_drv_data = {
.prepare_command = dw_mci_rockchip_prepare_command,
.set_ios = dw_mci_rk3288_set_ios,
.setup_clock = dw_mci_rk3288_setup_clock,
+ .init = dw_mci_rockchip_init,
};
static const struct of_device_id dw_mci_rockchip_match[] = {
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 69f0cc6..67c0451 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -34,7 +34,6 @@
#include <linux/mmc/dw_mmc.h>
#include <linux/bitops.h>
#include <linux/regulator/consumer.h>
-#include <linux/workqueue.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/mmc/slot-gpio.h>
@@ -62,6 +61,24 @@
SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \
SDMMC_IDMAC_INT_TI)
+struct idmac_desc_64addr {
+ u32 des0; /* Control Descriptor */
+
+ u32 des1; /* Reserved */
+
+ u32 des2; /*Buffer sizes */
+#define IDMAC_64ADDR_SET_BUFFER1_SIZE(d, s) \
+ ((d)->des2 = ((d)->des2 & 0x03ffe000) | ((s) & 0x1fff))
+
+ u32 des3; /* Reserved */
+
+ u32 des4; /* Lower 32-bits of Buffer Address Pointer 1*/
+ u32 des5; /* Upper 32-bits of Buffer Address Pointer 1*/
+
+ u32 des6; /* Lower 32-bits of Next Descriptor Address */
+ u32 des7; /* Upper 32-bits of Next Descriptor Address */
+};
+
struct idmac_desc {
u32 des0; /* Control Descriptor */
#define IDMAC_DES0_DIC BIT(1)
@@ -83,6 +100,7 @@
#endif /* CONFIG_MMC_DW_IDMAC */
static bool dw_mci_reset(struct dw_mci *host);
+static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
#if defined(CONFIG_DEBUG_FS)
static int dw_mci_req_show(struct seq_file *s, void *v)
@@ -414,31 +432,67 @@
unsigned int sg_len)
{
int i;
- struct idmac_desc *desc = host->sg_cpu;
+ if (host->dma_64bit_address == 1) {
+ struct idmac_desc_64addr *desc = host->sg_cpu;
- for (i = 0; i < sg_len; i++, desc++) {
- unsigned int length = sg_dma_len(&data->sg[i]);
- u32 mem_addr = sg_dma_address(&data->sg[i]);
+ for (i = 0; i < sg_len; i++, desc++) {
+ unsigned int length = sg_dma_len(&data->sg[i]);
+ u64 mem_addr = sg_dma_address(&data->sg[i]);
- /* Set the OWN bit and disable interrupts for this descriptor */
- desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC | IDMAC_DES0_CH;
+ /*
+ * Set the OWN bit and disable interrupts for this
+ * descriptor
+ */
+ desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC |
+ IDMAC_DES0_CH;
+ /* Buffer length */
+ IDMAC_64ADDR_SET_BUFFER1_SIZE(desc, length);
- /* Buffer length */
- IDMAC_SET_BUFFER1_SIZE(desc, length);
+ /* Physical address to DMA to/from */
+ desc->des4 = mem_addr & 0xffffffff;
+ desc->des5 = mem_addr >> 32;
+ }
- /* Physical address to DMA to/from */
- desc->des2 = mem_addr;
+ /* Set first descriptor */
+ desc = host->sg_cpu;
+ desc->des0 |= IDMAC_DES0_FD;
+
+ /* Set last descriptor */
+ desc = host->sg_cpu + (i - 1) *
+ sizeof(struct idmac_desc_64addr);
+ desc->des0 &= ~(IDMAC_DES0_CH | IDMAC_DES0_DIC);
+ desc->des0 |= IDMAC_DES0_LD;
+
+ } else {
+ struct idmac_desc *desc = host->sg_cpu;
+
+ for (i = 0; i < sg_len; i++, desc++) {
+ unsigned int length = sg_dma_len(&data->sg[i]);
+ u32 mem_addr = sg_dma_address(&data->sg[i]);
+
+ /*
+ * Set the OWN bit and disable interrupts for this
+ * descriptor
+ */
+ desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC |
+ IDMAC_DES0_CH;
+ /* Buffer length */
+ IDMAC_SET_BUFFER1_SIZE(desc, length);
+
+ /* Physical address to DMA to/from */
+ desc->des2 = mem_addr;
+ }
+
+ /* Set first descriptor */
+ desc = host->sg_cpu;
+ desc->des0 |= IDMAC_DES0_FD;
+
+ /* Set last descriptor */
+ desc = host->sg_cpu + (i - 1) * sizeof(struct idmac_desc);
+ desc->des0 &= ~(IDMAC_DES0_CH | IDMAC_DES0_DIC);
+ desc->des0 |= IDMAC_DES0_LD;
}
- /* Set first descriptor */
- desc = host->sg_cpu;
- desc->des0 |= IDMAC_DES0_FD;
-
- /* Set last descriptor */
- desc = host->sg_cpu + (i - 1) * sizeof(struct idmac_desc);
- desc->des0 &= ~(IDMAC_DES0_CH | IDMAC_DES0_DIC);
- desc->des0 |= IDMAC_DES0_LD;
-
wmb();
}
@@ -448,6 +502,10 @@
dw_mci_translate_sglist(host, host->data, sg_len);
+ /* Make sure to reset DMA in case we did PIO before this */
+ dw_mci_ctrl_reset(host, SDMMC_CTRL_DMA_RESET);
+ dw_mci_idmac_reset(host);
+
/* Select IDMAC interface */
temp = mci_readl(host, CTRL);
temp |= SDMMC_CTRL_USE_IDMAC;
@@ -466,29 +524,71 @@
static int dw_mci_idmac_init(struct dw_mci *host)
{
- struct idmac_desc *p;
int i;
- /* Number of descriptors in the ring buffer */
- host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc);
+ if (host->dma_64bit_address == 1) {
+ struct idmac_desc_64addr *p;
+ /* Number of descriptors in the ring buffer */
+ host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc_64addr);
- /* Forward link the descriptor list */
- for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++)
- p->des3 = host->sg_dma + (sizeof(struct idmac_desc) * (i + 1));
+ /* Forward link the descriptor list */
+ for (i = 0, p = host->sg_cpu; i < host->ring_size - 1;
+ i++, p++) {
+ p->des6 = (host->sg_dma +
+ (sizeof(struct idmac_desc_64addr) *
+ (i + 1))) & 0xffffffff;
- /* Set the last descriptor as the end-of-ring descriptor */
- p->des3 = host->sg_dma;
- p->des0 = IDMAC_DES0_ER;
+ p->des7 = (u64)(host->sg_dma +
+ (sizeof(struct idmac_desc_64addr) *
+ (i + 1))) >> 32;
+ /* Initialize reserved and buffer size fields to "0" */
+ p->des1 = 0;
+ p->des2 = 0;
+ p->des3 = 0;
+ }
+
+ /* Set the last descriptor as the end-of-ring descriptor */
+ p->des6 = host->sg_dma & 0xffffffff;
+ p->des7 = (u64)host->sg_dma >> 32;
+ p->des0 = IDMAC_DES0_ER;
+
+ } else {
+ struct idmac_desc *p;
+ /* Number of descriptors in the ring buffer */
+ host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc);
+
+ /* Forward link the descriptor list */
+ for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++)
+ p->des3 = host->sg_dma + (sizeof(struct idmac_desc) *
+ (i + 1));
+
+ /* Set the last descriptor as the end-of-ring descriptor */
+ p->des3 = host->sg_dma;
+ p->des0 = IDMAC_DES0_ER;
+ }
dw_mci_idmac_reset(host);
- /* Mask out interrupts - get Tx & Rx complete only */
- mci_writel(host, IDSTS, IDMAC_INT_CLR);
- mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI | SDMMC_IDMAC_INT_RI |
- SDMMC_IDMAC_INT_TI);
+ if (host->dma_64bit_address == 1) {
+ /* Mask out interrupts - get Tx & Rx complete only */
+ mci_writel(host, IDSTS64, IDMAC_INT_CLR);
+ mci_writel(host, IDINTEN64, SDMMC_IDMAC_INT_NI |
+ SDMMC_IDMAC_INT_RI | SDMMC_IDMAC_INT_TI);
- /* Set the descriptor base address */
- mci_writel(host, DBADDR, host->sg_dma);
+ /* Set the descriptor base address */
+ mci_writel(host, DBADDRL, host->sg_dma & 0xffffffff);
+ mci_writel(host, DBADDRU, (u64)host->sg_dma >> 32);
+
+ } else {
+ /* Mask out interrupts - get Tx & Rx complete only */
+ mci_writel(host, IDSTS, IDMAC_INT_CLR);
+ mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI |
+ SDMMC_IDMAC_INT_RI | SDMMC_IDMAC_INT_TI);
+
+ /* Set the descriptor base address */
+ mci_writel(host, DBADDR, host->sg_dma);
+ }
+
return 0;
}
@@ -626,6 +726,13 @@
WARN_ON(!(data->flags & MMC_DATA_READ));
+ /*
+ * CDTHRCTL doesn't exist prior to 240A (in fact that register offset is
+ * in the FIFO region, so we really shouldn't access it).
+ */
+ if (host->verid < DW_MMC_240A)
+ return;
+
if (host->timing != MMC_TIMING_MMC_HS200 &&
host->timing != MMC_TIMING_UHS_SDR104)
goto disable;
@@ -819,7 +926,7 @@
/* enable clock; only low power if no SDIO */
clk_en_a = SDMMC_CLKEN_ENABLE << slot->id;
- if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->id)))
+ if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->sdio_id)))
clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id;
mci_writel(host, CLKENA, clk_en_a);
@@ -1075,7 +1182,7 @@
ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv);
if (ret) {
- dev_err(&mmc->class_dev,
+ dev_dbg(&mmc->class_dev,
"Regulator set error %d: %d - %d\n",
ret, min_uv, max_uv);
return ret;
@@ -1180,10 +1287,10 @@
dw_mci_disable_low_power(slot);
mci_writel(host, INTMASK,
- (int_mask | SDMMC_INT_SDIO(slot->id)));
+ (int_mask | SDMMC_INT_SDIO(slot->sdio_id)));
} else {
mci_writel(host, INTMASK,
- (int_mask & ~SDMMC_INT_SDIO(slot->id)));
+ (int_mask & ~SDMMC_INT_SDIO(slot->sdio_id)));
}
}
@@ -1954,6 +2061,23 @@
tasklet_schedule(&host->tasklet);
}
+static void dw_mci_handle_cd(struct dw_mci *host)
+{
+ int i;
+
+ for (i = 0; i < host->num_slots; i++) {
+ struct dw_mci_slot *slot = host->slot[i];
+
+ if (!slot)
+ continue;
+
+ if (slot->mmc->ops->card_event)
+ slot->mmc->ops->card_event(slot->mmc);
+ mmc_detect_change(slot->mmc,
+ msecs_to_jiffies(host->pdata->detect_delay_ms));
+ }
+}
+
static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
{
struct dw_mci *host = dev_id;
@@ -2029,14 +2153,15 @@
if (pending & SDMMC_INT_CD) {
mci_writel(host, RINTSTS, SDMMC_INT_CD);
- queue_work(host->card_workqueue, &host->card_work);
+ dw_mci_handle_cd(host);
}
/* Handle SDIO Interrupts */
for (i = 0; i < host->num_slots; i++) {
struct dw_mci_slot *slot = host->slot[i];
- if (pending & SDMMC_INT_SDIO(i)) {
- mci_writel(host, RINTSTS, SDMMC_INT_SDIO(i));
+ if (pending & SDMMC_INT_SDIO(slot->sdio_id)) {
+ mci_writel(host, RINTSTS,
+ SDMMC_INT_SDIO(slot->sdio_id));
mmc_signal_sdio_irq(slot->mmc);
}
}
@@ -2045,99 +2170,28 @@
#ifdef CONFIG_MMC_DW_IDMAC
/* Handle DMA interrupts */
- pending = mci_readl(host, IDSTS);
- if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
- mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI);
- mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
- host->dma_ops->complete(host);
+ if (host->dma_64bit_address == 1) {
+ pending = mci_readl(host, IDSTS64);
+ if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
+ mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_TI |
+ SDMMC_IDMAC_INT_RI);
+ mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
+ host->dma_ops->complete(host);
+ }
+ } else {
+ pending = mci_readl(host, IDSTS);
+ if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
+ mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI |
+ SDMMC_IDMAC_INT_RI);
+ mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
+ host->dma_ops->complete(host);
+ }
}
#endif
return IRQ_HANDLED;
}
-static void dw_mci_work_routine_card(struct work_struct *work)
-{
- struct dw_mci *host = container_of(work, struct dw_mci, card_work);
- int i;
-
- for (i = 0; i < host->num_slots; i++) {
- struct dw_mci_slot *slot = host->slot[i];
- struct mmc_host *mmc = slot->mmc;
- struct mmc_request *mrq;
- int present;
-
- present = dw_mci_get_cd(mmc);
- while (present != slot->last_detect_state) {
- dev_dbg(&slot->mmc->class_dev, "card %s\n",
- present ? "inserted" : "removed");
-
- spin_lock_bh(&host->lock);
-
- /* Card change detected */
- slot->last_detect_state = present;
-
- /* Clean up queue if present */
- mrq = slot->mrq;
- if (mrq) {
- if (mrq == host->mrq) {
- host->data = NULL;
- host->cmd = NULL;
-
- switch (host->state) {
- case STATE_IDLE:
- case STATE_WAITING_CMD11_DONE:
- break;
- case STATE_SENDING_CMD11:
- case STATE_SENDING_CMD:
- mrq->cmd->error = -ENOMEDIUM;
- if (!mrq->data)
- break;
- /* fall through */
- case STATE_SENDING_DATA:
- mrq->data->error = -ENOMEDIUM;
- dw_mci_stop_dma(host);
- break;
- case STATE_DATA_BUSY:
- case STATE_DATA_ERROR:
- if (mrq->data->error == -EINPROGRESS)
- mrq->data->error = -ENOMEDIUM;
- /* fall through */
- case STATE_SENDING_STOP:
- if (mrq->stop)
- mrq->stop->error = -ENOMEDIUM;
- break;
- }
-
- dw_mci_request_end(host, mrq);
- } else {
- list_del(&slot->queue_node);
- mrq->cmd->error = -ENOMEDIUM;
- if (mrq->data)
- mrq->data->error = -ENOMEDIUM;
- if (mrq->stop)
- mrq->stop->error = -ENOMEDIUM;
-
- spin_unlock(&host->lock);
- mmc_request_done(slot->mmc, mrq);
- spin_lock(&host->lock);
- }
- }
-
- /* Power down slot */
- if (present == 0)
- dw_mci_reset(host);
-
- spin_unlock_bh(&host->lock);
-
- present = dw_mci_get_cd(mmc);
- }
-
- mmc_detect_change(slot->mmc,
- msecs_to_jiffies(host->pdata->detect_delay_ms));
- }
-}
-
#ifdef CONFIG_OF
/* given a slot id, find out the device node representing that slot */
static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot)
@@ -2206,6 +2260,7 @@
slot = mmc_priv(mmc);
slot->id = id;
+ slot->sdio_id = host->sdio_id0 + id;
slot->mmc = mmc;
slot->host = host;
host->slot[id] = slot;
@@ -2289,9 +2344,6 @@
dw_mci_init_debugfs(slot);
#endif
- /* Card initially undetected */
- slot->last_detect_state = 0;
-
return 0;
err_host_allocated:
@@ -2309,6 +2361,22 @@
static void dw_mci_init_dma(struct dw_mci *host)
{
+ int addr_config;
+ /* Check ADDR_CONFIG bit in HCON to find IDMAC address bus width */
+ addr_config = (mci_readl(host, HCON) >> 27) & 0x01;
+
+ if (addr_config == 1) {
+ /* host supports IDMAC in 64-bit address mode */
+ host->dma_64bit_address = 1;
+ dev_info(host->dev, "IDMAC supports 64-bit address mode.\n");
+ if (!dma_set_mask(host->dev, DMA_BIT_MASK(64)))
+ dma_set_coherent_mask(host->dev, DMA_BIT_MASK(64));
+ } else {
+ /* host supports IDMAC in 32-bit address mode */
+ host->dma_64bit_address = 0;
+ dev_info(host->dev, "IDMAC supports 32-bit address mode.\n");
+ }
+
/* Alloc memory for sg translation */
host->sg_cpu = dmam_alloc_coherent(host->dev, PAGE_SIZE,
&host->sg_dma, GFP_KERNEL);
@@ -2672,17 +2740,10 @@
host->data_offset = DATA_240A_OFFSET;
tasklet_init(&host->tasklet, dw_mci_tasklet_func, (unsigned long)host);
- host->card_workqueue = alloc_workqueue("dw-mci-card",
- WQ_MEM_RECLAIM, 1);
- if (!host->card_workqueue) {
- ret = -ENOMEM;
- goto err_dmaunmap;
- }
- INIT_WORK(&host->card_work, dw_mci_work_routine_card);
ret = devm_request_irq(host->dev, host->irq, dw_mci_interrupt,
host->irq_flags, "dw-mci", host);
if (ret)
- goto err_workqueue;
+ goto err_dmaunmap;
if (host->pdata->num_slots)
host->num_slots = host->pdata->num_slots;
@@ -2718,7 +2779,7 @@
} else {
dev_dbg(host->dev, "attempted to initialize %d slots, "
"but failed on all\n", host->num_slots);
- goto err_workqueue;
+ goto err_dmaunmap;
}
if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO)
@@ -2726,9 +2787,6 @@
return 0;
-err_workqueue:
- destroy_workqueue(host->card_workqueue);
-
err_dmaunmap:
if (host->use_dma && host->dma_ops->exit)
host->dma_ops->exit(host);
@@ -2762,8 +2820,6 @@
mci_writel(host, CLKENA, 0);
mci_writel(host, CLKSRC, 0);
- destroy_workqueue(host->card_workqueue);
-
if (host->use_dma && host->dma_ops->exit)
host->dma_ops->exit(host);
diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
index 01b99e8..0d0f7a2 100644
--- a/drivers/mmc/host/dw_mmc.h
+++ b/drivers/mmc/host/dw_mmc.h
@@ -55,6 +55,17 @@
#define SDMMC_BUFADDR 0x098
#define SDMMC_CDTHRCTL 0x100
#define SDMMC_DATA(x) (x)
+/*
+* Registers to support idmac 64-bit address mode
+*/
+#define SDMMC_DBADDRL 0x088
+#define SDMMC_DBADDRU 0x08c
+#define SDMMC_IDSTS64 0x090
+#define SDMMC_IDINTEN64 0x094
+#define SDMMC_DSCADDRL 0x098
+#define SDMMC_DSCADDRU 0x09c
+#define SDMMC_BUFADDRL 0x0A0
+#define SDMMC_BUFADDRU 0x0A4
/*
* Data offset is difference according to Version
@@ -214,7 +225,7 @@
* with CONFIG_MMC_CLKGATE.
* @flags: Random state bits associated with the slot.
* @id: Number of this slot.
- * @last_detect_state: Most recently observed card detect state.
+ * @sdio_id: Number of this slot in the SDIO interrupt registers.
*/
struct dw_mci_slot {
struct mmc_host *mmc;
@@ -234,7 +245,7 @@
#define DW_MMC_CARD_PRESENT 0
#define DW_MMC_CARD_NEED_INIT 1
int id;
- int last_detect_state;
+ int sdio_id;
};
struct dw_mci_tuning_data {
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 43af791..53bf7a4 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -736,8 +736,15 @@
chan = host->dma_tx_channel;
dmaengine_terminate_all(chan);
+ if (host->dma_desc_current == next->dma_desc)
+ host->dma_desc_current = NULL;
+
+ if (host->dma_current == next->dma_chan)
+ host->dma_current = NULL;
+
next->dma_desc = NULL;
next->dma_chan = NULL;
+ data->host_cookie = 0;
}
}
diff --git a/drivers/mmc/host/msm_sdcc.c b/drivers/mmc/host/msm_sdcc.c
index 9405ecd..90c60fd 100644
--- a/drivers/mmc/host/msm_sdcc.c
+++ b/drivers/mmc/host/msm_sdcc.c
@@ -1360,7 +1360,7 @@
if (ret)
goto cmd_irq_free;
- mmc_set_drvdata(pdev, mmc);
+ platform_set_drvdata(pdev, mmc);
mmc_add_host(mmc);
pr_info("%s: Qualcomm MSM SDCC at 0x%016llx irq %d,%d dma %d\n",
@@ -1419,7 +1419,7 @@
static int
msmsdcc_suspend(struct platform_device *dev, pm_message_t state)
{
- struct mmc_host *mmc = mmc_get_drvdata(dev);
+ struct mmc_host *mmc = platform_get_drvdata(dev);
if (mmc) {
struct msmsdcc_host *host = mmc_priv(mmc);
@@ -1437,7 +1437,7 @@
static int
msmsdcc_resume(struct platform_device *dev)
{
- struct mmc_host *mmc = mmc_get_drvdata(dev);
+ struct mmc_host *mmc = platform_get_drvdata(dev);
if (mmc) {
struct msmsdcc_host *host = mmc_priv(mmc);
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index 6b4c5ad..4f8618f 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -111,10 +111,15 @@
mvsd_write(MVSD_BLK_COUNT, data->blocks);
mvsd_write(MVSD_BLK_SIZE, data->blksz);
- if (nodma || (data->blksz | data->sg->offset) & 3) {
+ if (nodma || (data->blksz | data->sg->offset) & 3 ||
+ ((!(data->flags & MMC_DATA_READ) && data->sg->offset & 0x3f))) {
/*
* We cannot do DMA on a buffer which offset or size
* is not aligned on a 4-byte boundary.
+ *
+ * It also appears the host to card DMA can corrupt
+ * data when the buffer is not aligned on a 64 byte
+ * boundary.
*/
host->pio_size = data->blocks * data->blksz;
host->pio_ptr = sg_virt(data->sg);
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index ad11142..5316d9b 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -373,13 +373,9 @@
del_timer(&host->watchdog);
stat = mxcmci_readl(host, MMC_REG_STATUS);
- mxcmci_writel(host, stat & ~STATUS_DATA_TRANS_DONE, MMC_REG_STATUS);
dev_dbg(mmc_dev(host->mmc), "%s: 0x%08x\n", __func__, stat);
- if (stat & STATUS_READ_OP_DONE)
- mxcmci_writel(host, STATUS_READ_OP_DONE, MMC_REG_STATUS);
-
mxcmci_data_done(host, stat);
}
@@ -743,10 +739,8 @@
sdio_irq = (stat & STATUS_SDIO_INT_ACTIVE) && host->use_sdio;
spin_unlock_irqrestore(&host->lock, flags);
- if (mxcmci_use_dma(host) &&
- (stat & (STATUS_READ_OP_DONE | STATUS_WRITE_OP_DONE)))
- mxcmci_writel(host, STATUS_READ_OP_DONE | STATUS_WRITE_OP_DONE,
- MMC_REG_STATUS);
+ if (mxcmci_use_dma(host) && (stat & (STATUS_WRITE_OP_DONE)))
+ mxcmci_writel(host, STATUS_WRITE_OP_DONE, MMC_REG_STATUS);
if (sdio_irq) {
mxcmci_writel(host, STATUS_SDIO_INT_ACTIVE, MMC_REG_STATUS);
@@ -756,8 +750,7 @@
if (stat & STATUS_END_CMD_RESP)
mxcmci_cmd_done(host, stat);
- if (mxcmci_use_dma(host) &&
- (stat & (STATUS_DATA_TRANS_DONE | STATUS_WRITE_OP_DONE))) {
+ if (mxcmci_use_dma(host) && (stat & STATUS_WRITE_OP_DONE)) {
del_timer(&host->watchdog);
mxcmci_data_done(host, stat);
}
@@ -1084,12 +1077,14 @@
dat3_card_detect = true;
ret = mmc_regulator_get_supply(mmc);
- if (ret) {
- if (pdata && ret != -EPROBE_DEFER)
- mmc->ocr_avail = pdata->ocr_avail ? :
- MMC_VDD_32_33 | MMC_VDD_33_34;
+ if (ret == -EPROBE_DEFER)
+ goto out_free;
+
+ if (!mmc->ocr_avail) {
+ if (pdata && pdata->ocr_avail)
+ mmc->ocr_avail = pdata->ocr_avail;
else
- goto out_free;
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
}
if (dat3_card_detect)
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index cd74e51..60c4ca9 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -581,10 +581,9 @@
struct regulator *reg_vmmc;
struct mxs_ssp *ssp;
- iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq_err = platform_get_irq(pdev, 0);
- if (!iores || irq_err < 0)
- return -EINVAL;
+ if (irq_err < 0)
+ return irq_err;
mmc = mmc_alloc_host(sizeof(struct mxs_mmc_host), &pdev->dev);
if (!mmc)
@@ -593,6 +592,7 @@
host = mmc_priv(mmc);
ssp = &host->ssp;
ssp->dev = &pdev->dev;
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
ssp->base = devm_ioremap_resource(&pdev->dev, iores);
if (IS_ERR(ssp->base)) {
ret = PTR_ERR(ssp->base);
@@ -619,7 +619,9 @@
ret = PTR_ERR(ssp->clk);
goto out_mmc_free;
}
- clk_prepare_enable(ssp->clk);
+ ret = clk_prepare_enable(ssp->clk);
+ if (ret)
+ goto out_mmc_free;
ret = mxs_mmc_reset(host);
if (ret) {
@@ -660,7 +662,7 @@
platform_set_drvdata(pdev, mmc);
ret = devm_request_irq(&pdev->dev, irq_err, mxs_mmc_irq_handler, 0,
- DRIVER_NAME, host);
+ dev_name(&pdev->dev), host);
if (ret)
goto out_free_dma;
@@ -702,7 +704,7 @@
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int mxs_mmc_suspend(struct device *dev)
{
struct mmc_host *mmc = dev_get_drvdata(dev);
@@ -719,25 +721,19 @@
struct mxs_mmc_host *host = mmc_priv(mmc);
struct mxs_ssp *ssp = &host->ssp;
- clk_prepare_enable(ssp->clk);
- return 0;
+ return clk_prepare_enable(ssp->clk);
}
-
-static const struct dev_pm_ops mxs_mmc_pm_ops = {
- .suspend = mxs_mmc_suspend,
- .resume = mxs_mmc_resume,
-};
#endif
+static SIMPLE_DEV_PM_OPS(mxs_mmc_pm_ops, mxs_mmc_suspend, mxs_mmc_resume);
+
static struct platform_driver mxs_mmc_driver = {
.probe = mxs_mmc_probe,
.remove = mxs_mmc_remove,
.id_table = mxs_ssp_ids,
.driver = {
.name = DRIVER_NAME,
-#ifdef CONFIG_PM
.pm = &mxs_mmc_pm_ops,
-#endif
.of_match_table = mxs_mmc_dt_ids,
},
};
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index df27bb4..7c71dcd 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -42,7 +42,7 @@
#include <linux/regulator/consumer.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pm_runtime.h>
-#include <linux/platform_data/mmc-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
/* OMAP HSMMC Host Controller Registers */
#define OMAP_HSMMC_SYSSTATUS 0x0014
@@ -155,7 +155,7 @@
* omap.c controller driver. Luckily this is not currently done on any known
* omap_hsmmc.c device.
*/
-#define mmc_slot(host) (host->pdata->slots[host->slot_id])
+#define mmc_pdata(host) host->pdata
/*
* MMC Host controller read/write API's
@@ -207,7 +207,6 @@
int use_dma, dma_ch;
struct dma_chan *tx_chan;
struct dma_chan *rx_chan;
- int slot_id;
int response_busy;
int context_loss;
int protect_card;
@@ -220,7 +219,26 @@
#define HSMMC_SDIO_IRQ_ENABLED (1 << 1) /* SDIO irq enabled */
#define HSMMC_WAKE_IRQ_ENABLED (1 << 2)
struct omap_hsmmc_next next_data;
- struct omap_mmc_platform_data *pdata;
+ struct omap_hsmmc_platform_data *pdata;
+
+ /* To handle board related suspend/resume functionality for MMC */
+ int (*suspend)(struct device *dev);
+ int (*resume)(struct device *dev);
+
+ /* return MMC cover switch state, can be NULL if not supported.
+ *
+ * possible return values:
+ * 0 - closed
+ * 1 - open
+ */
+ int (*get_cover_state)(struct device *dev);
+
+ /* Card detection IRQs */
+ int card_detect_irq;
+
+ int (*card_detect)(struct device *dev);
+ int (*get_ro)(struct device *dev);
+
};
struct omap_mmc_of_data {
@@ -230,50 +248,48 @@
static void omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host);
-static int omap_hsmmc_card_detect(struct device *dev, int slot)
+static int omap_hsmmc_card_detect(struct device *dev)
{
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
- struct omap_mmc_platform_data *mmc = host->pdata;
+ struct omap_hsmmc_platform_data *mmc = host->pdata;
/* NOTE: assumes card detect signal is active-low */
- return !gpio_get_value_cansleep(mmc->slots[0].switch_pin);
+ return !gpio_get_value_cansleep(mmc->switch_pin);
}
-static int omap_hsmmc_get_wp(struct device *dev, int slot)
+static int omap_hsmmc_get_wp(struct device *dev)
{
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
- struct omap_mmc_platform_data *mmc = host->pdata;
+ struct omap_hsmmc_platform_data *mmc = host->pdata;
/* NOTE: assumes write protect signal is active-high */
- return gpio_get_value_cansleep(mmc->slots[0].gpio_wp);
+ return gpio_get_value_cansleep(mmc->gpio_wp);
}
-static int omap_hsmmc_get_cover_state(struct device *dev, int slot)
+static int omap_hsmmc_get_cover_state(struct device *dev)
{
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
- struct omap_mmc_platform_data *mmc = host->pdata;
+ struct omap_hsmmc_platform_data *mmc = host->pdata;
/* NOTE: assumes card detect signal is active-low */
- return !gpio_get_value_cansleep(mmc->slots[0].switch_pin);
+ return !gpio_get_value_cansleep(mmc->switch_pin);
}
#ifdef CONFIG_PM
-static int omap_hsmmc_suspend_cdirq(struct device *dev, int slot)
+static int omap_hsmmc_suspend_cdirq(struct device *dev)
{
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
- struct omap_mmc_platform_data *mmc = host->pdata;
- disable_irq(mmc->slots[0].card_detect_irq);
+ disable_irq(host->card_detect_irq);
return 0;
}
-static int omap_hsmmc_resume_cdirq(struct device *dev, int slot)
+static int omap_hsmmc_resume_cdirq(struct device *dev)
{
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
- struct omap_mmc_platform_data *mmc = host->pdata;
- enable_irq(mmc->slots[0].card_detect_irq);
+ enable_irq(host->card_detect_irq);
return 0;
}
@@ -286,8 +302,7 @@
#ifdef CONFIG_REGULATOR
-static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on,
- int vdd)
+static int omap_hsmmc_set_power(struct device *dev, int power_on, int vdd)
{
struct omap_hsmmc_host *host =
platform_get_drvdata(to_platform_device(dev));
@@ -300,8 +315,8 @@
if (!host->vcc)
return 0;
- if (mmc_slot(host).before_set_reg)
- mmc_slot(host).before_set_reg(dev, slot, power_on, vdd);
+ if (mmc_pdata(host)->before_set_reg)
+ mmc_pdata(host)->before_set_reg(dev, power_on, vdd);
if (host->pbias) {
if (host->pbias_enabled == 1) {
@@ -363,8 +378,8 @@
}
}
- if (mmc_slot(host).after_set_reg)
- mmc_slot(host).after_set_reg(dev, slot, power_on, vdd);
+ if (mmc_pdata(host)->after_set_reg)
+ mmc_pdata(host)->after_set_reg(dev, power_on, vdd);
error_set_power:
return ret;
@@ -383,18 +398,18 @@
} else {
host->vcc = reg;
ocr_value = mmc_regulator_get_ocrmask(reg);
- if (!mmc_slot(host).ocr_mask) {
- mmc_slot(host).ocr_mask = ocr_value;
+ if (!mmc_pdata(host)->ocr_mask) {
+ mmc_pdata(host)->ocr_mask = ocr_value;
} else {
- if (!(mmc_slot(host).ocr_mask & ocr_value)) {
+ if (!(mmc_pdata(host)->ocr_mask & ocr_value)) {
dev_err(host->dev, "ocrmask %x is not supported\n",
- mmc_slot(host).ocr_mask);
- mmc_slot(host).ocr_mask = 0;
+ mmc_pdata(host)->ocr_mask);
+ mmc_pdata(host)->ocr_mask = 0;
return -EINVAL;
}
}
}
- mmc_slot(host).set_power = omap_hsmmc_set_power;
+ mmc_pdata(host)->set_power = omap_hsmmc_set_power;
/* Allow an aux regulator */
reg = devm_regulator_get_optional(host->dev, "vmmc_aux");
@@ -404,7 +419,7 @@
host->pbias = IS_ERR(reg) ? NULL : reg;
/* For eMMC do not power off when not in sleep state */
- if (mmc_slot(host).no_regulator_off_init)
+ if (mmc_pdata(host)->no_regulator_off_init)
return 0;
/*
* To disable boot_on regulator, enable regulator
@@ -412,10 +427,10 @@
*/
if ((host->vcc && regulator_is_enabled(host->vcc) > 0) ||
(host->vcc_aux && regulator_is_enabled(host->vcc_aux))) {
- int vdd = ffs(mmc_slot(host).ocr_mask) - 1;
+ int vdd = ffs(mmc_pdata(host)->ocr_mask) - 1;
- mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd);
- mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
+ mmc_pdata(host)->set_power(host->dev, 1, vdd);
+ mmc_pdata(host)->set_power(host->dev, 0, 0);
}
return 0;
@@ -423,7 +438,7 @@
static void omap_hsmmc_reg_put(struct omap_hsmmc_host *host)
{
- mmc_slot(host).set_power = NULL;
+ mmc_pdata(host)->set_power = NULL;
}
static inline int omap_hsmmc_have_reg(void)
@@ -449,55 +464,59 @@
#endif
-static int omap_hsmmc_gpio_init(struct omap_mmc_platform_data *pdata)
+static int omap_hsmmc_gpio_init(struct omap_hsmmc_host *host,
+ struct omap_hsmmc_platform_data *pdata)
{
int ret;
- if (gpio_is_valid(pdata->slots[0].switch_pin)) {
- if (pdata->slots[0].cover)
- pdata->slots[0].get_cover_state =
- omap_hsmmc_get_cover_state;
+ if (gpio_is_valid(pdata->switch_pin)) {
+ if (pdata->cover)
+ host->get_cover_state =
+ omap_hsmmc_get_cover_state;
else
- pdata->slots[0].card_detect = omap_hsmmc_card_detect;
- pdata->slots[0].card_detect_irq =
- gpio_to_irq(pdata->slots[0].switch_pin);
- ret = gpio_request(pdata->slots[0].switch_pin, "mmc_cd");
+ host->card_detect = omap_hsmmc_card_detect;
+ host->card_detect_irq =
+ gpio_to_irq(pdata->switch_pin);
+ ret = gpio_request(pdata->switch_pin, "mmc_cd");
if (ret)
return ret;
- ret = gpio_direction_input(pdata->slots[0].switch_pin);
+ ret = gpio_direction_input(pdata->switch_pin);
if (ret)
goto err_free_sp;
- } else
- pdata->slots[0].switch_pin = -EINVAL;
+ } else {
+ pdata->switch_pin = -EINVAL;
+ }
- if (gpio_is_valid(pdata->slots[0].gpio_wp)) {
- pdata->slots[0].get_ro = omap_hsmmc_get_wp;
- ret = gpio_request(pdata->slots[0].gpio_wp, "mmc_wp");
+ if (gpio_is_valid(pdata->gpio_wp)) {
+ host->get_ro = omap_hsmmc_get_wp;
+ ret = gpio_request(pdata->gpio_wp, "mmc_wp");
if (ret)
goto err_free_cd;
- ret = gpio_direction_input(pdata->slots[0].gpio_wp);
+ ret = gpio_direction_input(pdata->gpio_wp);
if (ret)
goto err_free_wp;
- } else
- pdata->slots[0].gpio_wp = -EINVAL;
+ } else {
+ pdata->gpio_wp = -EINVAL;
+ }
return 0;
err_free_wp:
- gpio_free(pdata->slots[0].gpio_wp);
+ gpio_free(pdata->gpio_wp);
err_free_cd:
- if (gpio_is_valid(pdata->slots[0].switch_pin))
+ if (gpio_is_valid(pdata->switch_pin))
err_free_sp:
- gpio_free(pdata->slots[0].switch_pin);
+ gpio_free(pdata->switch_pin);
return ret;
}
-static void omap_hsmmc_gpio_free(struct omap_mmc_platform_data *pdata)
+static void omap_hsmmc_gpio_free(struct omap_hsmmc_host *host,
+ struct omap_hsmmc_platform_data *pdata)
{
- if (gpio_is_valid(pdata->slots[0].gpio_wp))
- gpio_free(pdata->slots[0].gpio_wp);
- if (gpio_is_valid(pdata->slots[0].switch_pin))
- gpio_free(pdata->slots[0].switch_pin);
+ if (gpio_is_valid(pdata->gpio_wp))
+ gpio_free(pdata->gpio_wp);
+ if (gpio_is_valid(pdata->switch_pin))
+ gpio_free(pdata->switch_pin);
}
/*
@@ -607,8 +626,9 @@
* in capabilities register
* - MMC/SD clock coming out of controller > 25MHz
*/
- if ((mmc_slot(host).features & HSMMC_HAS_HSPE_SUPPORT) &&
+ if ((mmc_pdata(host)->features & HSMMC_HAS_HSPE_SUPPORT) &&
(ios->timing != MMC_TIMING_MMC_DDR52) &&
+ (ios->timing != MMC_TIMING_UHS_DDR50) &&
((OMAP_HSMMC_READ(host->base, CAPA) & HSS) == HSS)) {
regval = OMAP_HSMMC_READ(host->base, HCTL);
if (clkdiv && (clk_get_rate(host->fclk)/clkdiv) > 25000000)
@@ -628,7 +648,8 @@
u32 con;
con = OMAP_HSMMC_READ(host->base, CON);
- if (ios->timing == MMC_TIMING_MMC_DDR52)
+ if (ios->timing == MMC_TIMING_MMC_DDR52 ||
+ ios->timing == MMC_TIMING_UHS_DDR50)
con |= DDR; /* configure in DDR mode */
else
con &= ~DDR;
@@ -791,8 +812,8 @@
{
int r = 1;
- if (mmc_slot(host).get_cover_state)
- r = mmc_slot(host).get_cover_state(host->dev, host->slot_id);
+ if (host->get_cover_state)
+ r = host->get_cover_state(host->dev);
return r;
}
@@ -816,7 +837,7 @@
struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev);
struct omap_hsmmc_host *host = mmc_priv(mmc);
- return sprintf(buf, "%s\n", mmc_slot(host).name);
+ return sprintf(buf, "%s\n", mmc_pdata(host)->name);
}
static DEVICE_ATTR(slot_name, S_IRUGO, omap_hsmmc_show_slot_name, NULL);
@@ -1061,7 +1082,7 @@
* OMAP4 ES2 and greater has an updated reset logic.
* Monitor a 0->1 transition first
*/
- if (mmc_slot(host).features & HSMMC_HAS_UPDATED_RESET) {
+ if (mmc_pdata(host)->features & HSMMC_HAS_UPDATED_RESET) {
while ((!(OMAP_HSMMC_READ(host->base, SYSCTL) & bit))
&& (i++ < limit))
udelay(1);
@@ -1210,12 +1231,11 @@
clk_disable_unprepare(host->dbclk);
/* Turn the power off */
- ret = mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
+ ret = mmc_pdata(host)->set_power(host->dev, 0, 0);
/* Turn the power ON with given VDD 1.8 or 3.0v */
if (!ret)
- ret = mmc_slot(host).set_power(host->dev, host->slot_id, 1,
- vdd);
+ ret = mmc_pdata(host)->set_power(host->dev, 1, vdd);
pm_runtime_get_sync(host->dev);
if (host->dbclk)
clk_prepare_enable(host->dbclk);
@@ -1259,11 +1279,11 @@
/* Protect the card while the cover is open */
static void omap_hsmmc_protect_card(struct omap_hsmmc_host *host)
{
- if (!mmc_slot(host).get_cover_state)
+ if (!host->get_cover_state)
return;
host->reqs_blocked = 0;
- if (mmc_slot(host).get_cover_state(host->dev, host->slot_id)) {
+ if (host->get_cover_state(host->dev)) {
if (host->protect_card) {
dev_info(host->dev, "%s: cover is closed, "
"card is now accessible\n",
@@ -1286,13 +1306,12 @@
static irqreturn_t omap_hsmmc_detect(int irq, void *dev_id)
{
struct omap_hsmmc_host *host = dev_id;
- struct omap_mmc_slot_data *slot = &mmc_slot(host);
int carddetect;
sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch");
- if (slot->card_detect)
- carddetect = slot->card_detect(host->dev, host->slot_id);
+ if (host->card_detect)
+ carddetect = host->card_detect(host->dev);
else {
omap_hsmmc_protect_card(host);
carddetect = -ENOSYS;
@@ -1618,12 +1637,10 @@
if (ios->power_mode != host->power_mode) {
switch (ios->power_mode) {
case MMC_POWER_OFF:
- mmc_slot(host).set_power(host->dev, host->slot_id,
- 0, 0);
+ mmc_pdata(host)->set_power(host->dev, 0, 0);
break;
case MMC_POWER_UP:
- mmc_slot(host).set_power(host->dev, host->slot_id,
- 1, ios->vdd);
+ mmc_pdata(host)->set_power(host->dev, 1, ios->vdd);
break;
case MMC_POWER_ON:
do_send_init_stream = 1;
@@ -1668,26 +1685,26 @@
{
struct omap_hsmmc_host *host = mmc_priv(mmc);
- if (!mmc_slot(host).card_detect)
+ if (!host->card_detect)
return -ENOSYS;
- return mmc_slot(host).card_detect(host->dev, host->slot_id);
+ return host->card_detect(host->dev);
}
static int omap_hsmmc_get_ro(struct mmc_host *mmc)
{
struct omap_hsmmc_host *host = mmc_priv(mmc);
- if (!mmc_slot(host).get_ro)
+ if (!host->get_ro)
return -ENOSYS;
- return mmc_slot(host).get_ro(host->dev, 0);
+ return host->get_ro(host->dev);
}
static void omap_hsmmc_init_card(struct mmc_host *mmc, struct mmc_card *card)
{
struct omap_hsmmc_host *host = mmc_priv(mmc);
- if (mmc_slot(host).init_card)
- mmc_slot(host).init_card(card);
+ if (mmc_pdata(host)->init_card)
+ mmc_pdata(host)->init_card(card);
}
static void omap_hsmmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
@@ -1957,9 +1974,9 @@
};
MODULE_DEVICE_TABLE(of, omap_mmc_of_match);
-static struct omap_mmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
+static struct omap_hsmmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
{
- struct omap_mmc_platform_data *pdata;
+ struct omap_hsmmc_platform_data *pdata;
struct device_node *np = dev->of_node;
u32 bus_width, max_freq;
int cd_gpio, wp_gpio;
@@ -1976,40 +1993,38 @@
if (of_find_property(np, "ti,dual-volt", NULL))
pdata->controller_flags |= OMAP_HSMMC_SUPPORTS_DUAL_VOLT;
- /* This driver only supports 1 slot */
- pdata->nr_slots = 1;
- pdata->slots[0].switch_pin = cd_gpio;
- pdata->slots[0].gpio_wp = wp_gpio;
+ pdata->switch_pin = cd_gpio;
+ pdata->gpio_wp = wp_gpio;
if (of_find_property(np, "ti,non-removable", NULL)) {
- pdata->slots[0].nonremovable = true;
- pdata->slots[0].no_regulator_off_init = true;
+ pdata->nonremovable = true;
+ pdata->no_regulator_off_init = true;
}
of_property_read_u32(np, "bus-width", &bus_width);
if (bus_width == 4)
- pdata->slots[0].caps |= MMC_CAP_4_BIT_DATA;
+ pdata->caps |= MMC_CAP_4_BIT_DATA;
else if (bus_width == 8)
- pdata->slots[0].caps |= MMC_CAP_8_BIT_DATA;
+ pdata->caps |= MMC_CAP_8_BIT_DATA;
if (of_find_property(np, "ti,needs-special-reset", NULL))
- pdata->slots[0].features |= HSMMC_HAS_UPDATED_RESET;
+ pdata->features |= HSMMC_HAS_UPDATED_RESET;
if (!of_property_read_u32(np, "max-frequency", &max_freq))
pdata->max_freq = max_freq;
if (of_find_property(np, "ti,needs-special-hs-handling", NULL))
- pdata->slots[0].features |= HSMMC_HAS_HSPE_SUPPORT;
+ pdata->features |= HSMMC_HAS_HSPE_SUPPORT;
if (of_find_property(np, "keep-power-in-suspend", NULL))
- pdata->slots[0].pm_caps |= MMC_PM_KEEP_POWER;
+ pdata->pm_caps |= MMC_PM_KEEP_POWER;
if (of_find_property(np, "enable-sdio-wakeup", NULL))
- pdata->slots[0].pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
+ pdata->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
return pdata;
}
#else
-static inline struct omap_mmc_platform_data
+static inline struct omap_hsmmc_platform_data
*of_get_hsmmc_pdata(struct device *dev)
{
return ERR_PTR(-EINVAL);
@@ -2018,7 +2033,7 @@
static int omap_hsmmc_probe(struct platform_device *pdev)
{
- struct omap_mmc_platform_data *pdata = pdev->dev.platform_data;
+ struct omap_hsmmc_platform_data *pdata = pdev->dev.platform_data;
struct mmc_host *mmc;
struct omap_hsmmc_host *host = NULL;
struct resource *res;
@@ -2048,11 +2063,6 @@
return -ENXIO;
}
- if (pdata->nr_slots == 0) {
- dev_err(&pdev->dev, "No Slots\n");
- return -ENXIO;
- }
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
if (res == NULL || irq < 0)
@@ -2062,14 +2072,10 @@
if (IS_ERR(base))
return PTR_ERR(base);
- ret = omap_hsmmc_gpio_init(pdata);
- if (ret)
- goto err;
-
mmc = mmc_alloc_host(sizeof(struct omap_hsmmc_host), &pdev->dev);
if (!mmc) {
ret = -ENOMEM;
- goto err_alloc;
+ goto err;
}
host = mmc_priv(mmc);
@@ -2079,13 +2085,16 @@
host->use_dma = 1;
host->dma_ch = -1;
host->irq = irq;
- host->slot_id = 0;
host->mapbase = res->start + pdata->reg_offset;
host->base = base + pdata->reg_offset;
host->power_mode = MMC_POWER_OFF;
host->next_data.cookie = 1;
host->pbias_enabled = 0;
+ ret = omap_hsmmc_gpio_init(host, pdata);
+ if (ret)
+ goto err_gpio;
+
platform_set_drvdata(pdev, host);
if (pdev->dev.of_node)
@@ -2144,14 +2153,14 @@
mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_ERASE;
- mmc->caps |= mmc_slot(host).caps;
+ mmc->caps |= mmc_pdata(host)->caps;
if (mmc->caps & MMC_CAP_8_BIT_DATA)
mmc->caps |= MMC_CAP_4_BIT_DATA;
- if (mmc_slot(host).nonremovable)
+ if (mmc_pdata(host)->nonremovable)
mmc->caps |= MMC_CAP_NONREMOVABLE;
- mmc->pm_caps = mmc_slot(host).pm_caps;
+ mmc->pm_caps = mmc_pdata(host)->pm_caps;
omap_hsmmc_conf_bus_power(host);
@@ -2204,27 +2213,19 @@
goto err_irq;
}
- if (pdata->init != NULL) {
- if (pdata->init(&pdev->dev) != 0) {
- dev_err(mmc_dev(host->mmc),
- "Unable to configure MMC IRQs\n");
- goto err_irq;
- }
- }
-
- if (omap_hsmmc_have_reg() && !mmc_slot(host).set_power) {
+ if (omap_hsmmc_have_reg() && !mmc_pdata(host)->set_power) {
ret = omap_hsmmc_reg_get(host);
if (ret)
- goto err_reg;
+ goto err_irq;
host->use_reg = 1;
}
- mmc->ocr_avail = mmc_slot(host).ocr_mask;
+ mmc->ocr_avail = mmc_pdata(host)->ocr_mask;
/* Request IRQ for card detect */
- if ((mmc_slot(host).card_detect_irq)) {
+ if (host->card_detect_irq) {
ret = devm_request_threaded_irq(&pdev->dev,
- mmc_slot(host).card_detect_irq,
+ host->card_detect_irq,
NULL, omap_hsmmc_detect,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
mmc_hostname(mmc), host);
@@ -2233,8 +2234,8 @@
"Unable to grab MMC CD IRQ\n");
goto err_irq_cd;
}
- pdata->suspend = omap_hsmmc_suspend_cdirq;
- pdata->resume = omap_hsmmc_resume_cdirq;
+ host->suspend = omap_hsmmc_suspend_cdirq;
+ host->resume = omap_hsmmc_resume_cdirq;
}
omap_hsmmc_disable_irq(host);
@@ -2255,12 +2256,12 @@
mmc_add_host(mmc);
- if (mmc_slot(host).name != NULL) {
+ if (mmc_pdata(host)->name != NULL) {
ret = device_create_file(&mmc->class_dev, &dev_attr_slot_name);
if (ret < 0)
goto err_slot_name;
}
- if (mmc_slot(host).card_detect_irq && mmc_slot(host).get_cover_state) {
+ if (host->card_detect_irq && host->get_cover_state) {
ret = device_create_file(&mmc->class_dev,
&dev_attr_cover_switch);
if (ret < 0)
@@ -2278,9 +2279,6 @@
err_irq_cd:
if (host->use_reg)
omap_hsmmc_reg_put(host);
-err_reg:
- if (host->pdata->cleanup)
- host->pdata->cleanup(&pdev->dev);
err_irq:
if (host->tx_chan)
dma_release_channel(host->tx_chan);
@@ -2291,9 +2289,9 @@
if (host->dbclk)
clk_disable_unprepare(host->dbclk);
err1:
+ omap_hsmmc_gpio_free(host, pdata);
+err_gpio:
mmc_free_host(mmc);
-err_alloc:
- omap_hsmmc_gpio_free(pdata);
err:
return ret;
}
@@ -2306,8 +2304,6 @@
mmc_remove_host(host->mmc);
if (host->use_reg)
omap_hsmmc_reg_put(host);
- if (host->pdata->cleanup)
- host->pdata->cleanup(&pdev->dev);
if (host->tx_chan)
dma_release_channel(host->tx_chan);
@@ -2319,7 +2315,7 @@
if (host->dbclk)
clk_disable_unprepare(host->dbclk);
- omap_hsmmc_gpio_free(host->pdata);
+ omap_hsmmc_gpio_free(host, host->pdata);
mmc_free_host(host->mmc);
return 0;
@@ -2330,8 +2326,8 @@
{
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
- if (host->pdata->suspend)
- return host->pdata->suspend(dev, host->slot_id);
+ if (host->suspend)
+ return host->suspend(dev);
return 0;
}
@@ -2340,8 +2336,8 @@
{
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
- if (host->pdata->resume)
- host->pdata->resume(dev, host->slot_id);
+ if (host->resume)
+ host->resume(dev);
}
diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index 9cccc0e..daba49a 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -76,6 +76,7 @@
const struct sdhci_acpi_slot *slot;
struct platform_device *pdev;
bool use_runtime_pm;
+ bool dma_setup;
};
static inline bool sdhci_acpi_flag(struct sdhci_acpi_host *c, unsigned int flag)
@@ -85,7 +86,29 @@
static int sdhci_acpi_enable_dma(struct sdhci_host *host)
{
- return 0;
+ struct sdhci_acpi_host *c = sdhci_priv(host);
+ struct device *dev = &c->pdev->dev;
+ int err = -1;
+
+ if (c->dma_setup)
+ return 0;
+
+ if (host->flags & SDHCI_USE_64_BIT_DMA) {
+ if (host->quirks2 & SDHCI_QUIRK2_BROKEN_64_BIT_DMA) {
+ host->flags &= ~SDHCI_USE_64_BIT_DMA;
+ } else {
+ err = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
+ if (err)
+ dev_warn(dev, "Failed to set 64-bit DMA mask\n");
+ }
+ }
+
+ if (err)
+ err = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+
+ c->dma_setup = !err;
+
+ return err;
}
static void sdhci_acpi_int_hw_reset(struct sdhci_host *host)
@@ -180,17 +203,21 @@
static const struct sdhci_acpi_slot sdhci_acpi_slot_int_emmc = {
.chip = &sdhci_acpi_chip_int,
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
- MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR,
+ MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR |
+ MMC_CAP_BUS_WIDTH_TEST | MMC_CAP_WAIT_WHILE_BUSY,
.caps2 = MMC_CAP2_HC_ERASE_SZ,
.flags = SDHCI_ACPI_RUNTIME_PM,
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | SDHCI_QUIRK2_STOP_WITH_TC,
.probe_slot = sdhci_acpi_emmc_probe_slot,
};
static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = {
- .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION,
+ .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
+ SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON,
- .caps = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD,
+ .caps = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD |
+ MMC_CAP_BUS_WIDTH_TEST | MMC_CAP_WAIT_WHILE_BUSY,
.flags = SDHCI_ACPI_RUNTIME_PM,
.pm_caps = MMC_PM_KEEP_POWER,
.probe_slot = sdhci_acpi_sdio_probe_slot,
@@ -199,8 +226,10 @@
static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sd = {
.flags = SDHCI_ACPI_SD_CD | SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL |
SDHCI_ACPI_RUNTIME_PM,
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON |
SDHCI_QUIRK2_STOP_WITH_TC,
+ .caps = MMC_CAP_BUS_WIDTH_TEST | MMC_CAP_WAIT_WHILE_BUSY,
.probe_slot = sdhci_acpi_sd_probe_slot,
};
@@ -305,21 +334,6 @@
goto err_free;
}
- if (!dev->dma_mask) {
- u64 dma_mask;
-
- if (sdhci_readl(host, SDHCI_CAPABILITIES) & SDHCI_CAN_64BIT) {
- /* 64-bit DMA is not supported at present */
- dma_mask = DMA_BIT_MASK(32);
- } else {
- dma_mask = DMA_BIT_MASK(32);
- }
-
- err = dma_coerce_mask_and_coherent(dev, dma_mask);
- if (err)
- goto err_free;
- }
-
if (c->slot) {
if (c->slot->probe_slot) {
err = c->slot->probe_slot(pdev, hid, uid);
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 587ee0e..12711ab 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -65,8 +65,6 @@
/* NOTE: the minimum valid tuning start tap for mx6sl is 1 */
#define ESDHC_TUNING_START_TAP 0x1
-#define ESDHC_TUNING_BLOCK_PATTERN_LEN 64
-
/* pinctrl state */
#define ESDHC_PINCTRL_STATE_100MHZ "state_100mhz"
#define ESDHC_PINCTRL_STATE_200MHZ "state_200mhz"
@@ -692,8 +690,6 @@
/* FIXME: delay a bit for card to be ready for next tuning due to errors */
mdelay(1);
- /* This is balanced by the runtime put in sdhci_tasklet_finish */
- pm_runtime_get_sync(host->mmc->parent);
reg = readl(host->ioaddr + ESDHC_MIX_CTRL);
reg |= ESDHC_MIX_CTRL_EXE_TUNE | ESDHC_MIX_CTRL_SMPCLK_SEL |
ESDHC_MIX_CTRL_FBCLK_SEL;
@@ -704,54 +700,6 @@
val, readl(host->ioaddr + ESDHC_TUNE_CTRL_STATUS));
}
-static void esdhc_request_done(struct mmc_request *mrq)
-{
- complete(&mrq->completion);
-}
-
-static int esdhc_send_tuning_cmd(struct sdhci_host *host, u32 opcode,
- struct scatterlist *sg)
-{
- struct mmc_command cmd = {0};
- struct mmc_request mrq = {NULL};
- struct mmc_data data = {0};
-
- cmd.opcode = opcode;
- cmd.arg = 0;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
-
- data.blksz = ESDHC_TUNING_BLOCK_PATTERN_LEN;
- data.blocks = 1;
- data.flags = MMC_DATA_READ;
- data.sg = sg;
- data.sg_len = 1;
-
- mrq.cmd = &cmd;
- mrq.cmd->mrq = &mrq;
- mrq.data = &data;
- mrq.data->mrq = &mrq;
- mrq.cmd->data = mrq.data;
-
- mrq.done = esdhc_request_done;
- init_completion(&(mrq.completion));
-
- spin_lock_irq(&host->lock);
- host->mrq = &mrq;
-
- sdhci_send_command(host, mrq.cmd);
-
- spin_unlock_irq(&host->lock);
-
- wait_for_completion(&mrq.completion);
-
- if (cmd.error)
- return cmd.error;
- if (data.error)
- return data.error;
-
- return 0;
-}
-
static void esdhc_post_tuning(struct sdhci_host *host)
{
u32 reg;
@@ -763,21 +711,13 @@
static int esdhc_executing_tuning(struct sdhci_host *host, u32 opcode)
{
- struct scatterlist sg;
- char *tuning_pattern;
int min, max, avg, ret;
- tuning_pattern = kmalloc(ESDHC_TUNING_BLOCK_PATTERN_LEN, GFP_KERNEL);
- if (!tuning_pattern)
- return -ENOMEM;
-
- sg_init_one(&sg, tuning_pattern, ESDHC_TUNING_BLOCK_PATTERN_LEN);
-
/* find the mininum delay first which can pass tuning */
min = ESDHC_TUNE_CTRL_MIN;
while (min < ESDHC_TUNE_CTRL_MAX) {
esdhc_prepare_tuning(host, min);
- if (!esdhc_send_tuning_cmd(host, opcode, &sg))
+ if (!mmc_send_tuning(host->mmc))
break;
min += ESDHC_TUNE_CTRL_STEP;
}
@@ -786,7 +726,7 @@
max = min + ESDHC_TUNE_CTRL_STEP;
while (max < ESDHC_TUNE_CTRL_MAX) {
esdhc_prepare_tuning(host, max);
- if (esdhc_send_tuning_cmd(host, opcode, &sg)) {
+ if (mmc_send_tuning(host->mmc)) {
max -= ESDHC_TUNE_CTRL_STEP;
break;
}
@@ -796,11 +736,9 @@
/* use average delay to get the best timing */
avg = (min + max) / 2;
esdhc_prepare_tuning(host, avg);
- ret = esdhc_send_tuning_cmd(host, opcode, &sg);
+ ret = mmc_send_tuning(host->mmc);
esdhc_post_tuning(host);
- kfree(tuning_pattern);
-
dev_dbg(mmc_dev(host->mmc), "tunning %s at 0x%x ret %d\n",
ret ? "failed" : "passed", avg, ret);
@@ -1031,11 +969,8 @@
imx_data->pins_default = pinctrl_lookup_state(imx_data->pinctrl,
PINCTRL_STATE_DEFAULT);
- if (IS_ERR(imx_data->pins_default)) {
- err = PTR_ERR(imx_data->pins_default);
- dev_err(mmc_dev(host->mmc), "could not get default state\n");
- goto disable_clk;
- }
+ if (IS_ERR(imx_data->pins_default))
+ dev_warn(mmc_dev(host->mmc), "could not get default state\n");
host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
@@ -1123,7 +1058,8 @@
}
/* sdr50 and sdr104 needs work on 1.8v signal voltage */
- if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data)) {
+ if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data) &&
+ !IS_ERR(imx_data->pins_default)) {
imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl,
ESDHC_PINCTRL_STATE_100MHZ);
imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl,
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 3080438..3d32ce8 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -339,9 +339,7 @@
static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
{
int tuning_seq_cnt = 3;
- u8 phase, *data_buf, tuned_phases[16], tuned_phase_cnt = 0;
- const u8 *tuning_block_pattern = tuning_blk_pattern_4bit;
- int size = sizeof(tuning_blk_pattern_4bit);
+ u8 phase, tuned_phases[16], tuned_phase_cnt = 0;
int rc;
struct mmc_host *mmc = host->mmc;
struct mmc_ios ios = host->mmc->ios;
@@ -355,53 +353,21 @@
(ios.timing == MMC_TIMING_UHS_SDR104)))
return 0;
- if ((opcode == MMC_SEND_TUNING_BLOCK_HS200) &&
- (mmc->ios.bus_width == MMC_BUS_WIDTH_8)) {
- tuning_block_pattern = tuning_blk_pattern_8bit;
- size = sizeof(tuning_blk_pattern_8bit);
- }
-
- data_buf = kmalloc(size, GFP_KERNEL);
- if (!data_buf)
- return -ENOMEM;
-
retry:
/* First of all reset the tuning block */
rc = msm_init_cm_dll(host);
if (rc)
- goto out;
+ return rc;
phase = 0;
do {
- struct mmc_command cmd = { 0 };
- struct mmc_data data = { 0 };
- struct mmc_request mrq = {
- .cmd = &cmd,
- .data = &data
- };
- struct scatterlist sg;
-
/* Set the phase in delay line hw block */
rc = msm_config_cm_dll_phase(host, phase);
if (rc)
- goto out;
+ return rc;
- cmd.opcode = opcode;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
-
- data.blksz = size;
- data.blocks = 1;
- data.flags = MMC_DATA_READ;
- data.timeout_ns = NSEC_PER_SEC; /* 1 second */
-
- data.sg = &sg;
- data.sg_len = 1;
- sg_init_one(&sg, data_buf, size);
- memset(data_buf, 0, size);
- mmc_wait_for_req(mmc, &mrq);
-
- if (!cmd.error && !data.error &&
- !memcmp(data_buf, tuning_block_pattern, size)) {
+ rc = mmc_send_tuning(mmc);
+ if (!rc) {
/* Tuning is successful at this tuning point */
tuned_phases[tuned_phase_cnt++] = phase;
dev_dbg(mmc_dev(mmc), "%s: Found good phase = %d\n",
@@ -413,7 +379,7 @@
rc = msm_find_most_appropriate_phase(host, tuned_phases,
tuned_phase_cnt);
if (rc < 0)
- goto out;
+ return rc;
else
phase = rc;
@@ -423,7 +389,7 @@
*/
rc = msm_config_cm_dll_phase(host, phase);
if (rc)
- goto out;
+ return rc;
dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n",
mmc_hostname(mmc), phase);
} else {
@@ -435,8 +401,6 @@
rc = -EIO;
}
-out:
- kfree(data_buf);
return rc;
}
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 981d66e..bcb51e9 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -165,7 +165,6 @@
host = sdhci_pltfm_init(pdev, &sdhci_arasan_pdata, 0);
if (IS_ERR(host)) {
ret = PTR_ERR(host);
- dev_err(&pdev->dev, "platform init failed (%u)\n", ret);
goto clk_disable_all;
}
@@ -175,10 +174,8 @@
pltfm_host->clk = clk_xin;
ret = sdhci_add_host(host);
- if (ret) {
- dev_err(&pdev->dev, "platform register failed (%u)\n", ret);
+ if (ret)
goto err_pltfm_free;
- }
return 0;
diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
index 5670e38..e2ec108d 100644
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -127,8 +127,6 @@
return;
scratch_32 &= ~((1 << 21) | (1 << 30));
- /* Set RTD3 function disabled */
- scratch_32 |= ((1 << 29) | (1 << 28));
pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG3, scratch_32);
/* Set L1 Entrance Timer */
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 6119297..95f7300 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -269,7 +269,9 @@
static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
{
slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
- MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR;
+ MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR |
+ MMC_CAP_BUS_WIDTH_TEST |
+ MMC_CAP_WAIT_WHILE_BUSY;
slot->host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ;
slot->hw_reset = sdhci_pci_int_hw_reset;
if (slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_BSW_EMMC)
@@ -279,12 +281,16 @@
static int byt_sdio_probe_slot(struct sdhci_pci_slot *slot)
{
- slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE;
+ slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE |
+ MMC_CAP_BUS_WIDTH_TEST |
+ MMC_CAP_WAIT_WHILE_BUSY;
return 0;
}
static int byt_sd_probe_slot(struct sdhci_pci_slot *slot)
{
+ slot->host->mmc->caps |= MMC_CAP_BUS_WIDTH_TEST |
+ MMC_CAP_WAIT_WHILE_BUSY;
slot->cd_con_id = NULL;
slot->cd_idx = 0;
slot->cd_override_level = true;
@@ -294,11 +300,13 @@
static const struct sdhci_pci_fixes sdhci_intel_byt_emmc = {
.allow_runtime_pm = true,
.probe_slot = byt_emmc_probe_slot,
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
SDHCI_QUIRK2_STOP_WITH_TC,
};
static const struct sdhci_pci_fixes sdhci_intel_byt_sdio = {
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON |
SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
.allow_runtime_pm = true,
@@ -306,6 +314,7 @@
};
static const struct sdhci_pci_fixes sdhci_intel_byt_sd = {
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON |
SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
SDHCI_QUIRK2_STOP_WITH_TC,
@@ -645,6 +654,25 @@
.probe_slot = rtsx_probe_slot,
};
+static int amd_probe(struct sdhci_pci_chip *chip)
+{
+ struct pci_dev *smbus_dev;
+
+ smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+ PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, NULL);
+
+ if (smbus_dev && (smbus_dev->revision < 0x51)) {
+ chip->quirks2 |= SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD;
+ chip->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200;
+ }
+
+ return 0;
+}
+
+static const struct sdhci_pci_fixes sdhci_amd = {
+ .probe = amd_probe,
+};
+
static const struct pci_device_id pci_ids[] = {
{
.vendor = PCI_VENDOR_ID_RICOH,
@@ -1044,7 +1072,15 @@
.subdevice = PCI_ANY_ID,
.driver_data = (kernel_ulong_t)&sdhci_o2,
},
-
+ {
+ .vendor = PCI_VENDOR_ID_AMD,
+ .device = PCI_ANY_ID,
+ .class = PCI_CLASS_SYSTEM_SDHCI << 8,
+ .class_mask = 0xFFFF00,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_amd,
+ },
{ /* Generic SD host controller */
PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
},
@@ -1064,7 +1100,7 @@
{
struct sdhci_pci_slot *slot;
struct pci_dev *pdev;
- int ret;
+ int ret = -1;
slot = sdhci_priv(host);
pdev = slot->chip->pdev;
@@ -1076,7 +1112,17 @@
"doesn't fully claim to support it.\n");
}
- ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (host->flags & SDHCI_USE_64_BIT_DMA) {
+ if (host->quirks2 & SDHCI_QUIRK2_BROKEN_64_BIT_DMA) {
+ host->flags &= ~SDHCI_USE_64_BIT_DMA;
+ } else {
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (ret)
+ dev_warn(&pdev->dev, "Failed to set 64-bit DMA mask\n");
+ }
+ }
+ if (ret)
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (ret)
return ret;
diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c
index b4c23e9..f98008b 100644
--- a/drivers/mmc/host/sdhci-pxav2.c
+++ b/drivers/mmc/host/sdhci-pxav2.c
@@ -167,23 +167,17 @@
struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
struct device *dev = &pdev->dev;
struct sdhci_host *host = NULL;
- struct sdhci_pxa *pxa = NULL;
const struct of_device_id *match;
int ret;
struct clk *clk;
- pxa = kzalloc(sizeof(struct sdhci_pxa), GFP_KERNEL);
- if (!pxa)
- return -ENOMEM;
-
host = sdhci_pltfm_init(pdev, NULL, 0);
- if (IS_ERR(host)) {
- kfree(pxa);
+ if (IS_ERR(host))
return PTR_ERR(host);
- }
+
pltfm_host = sdhci_priv(host);
- pltfm_host->priv = pxa;
+ pltfm_host->priv = NULL;
clk = clk_get(dev, "PXA-SDHCLK");
if (IS_ERR(clk)) {
@@ -238,7 +232,6 @@
clk_put(clk);
err_clk_get:
sdhci_pltfm_free(pdev);
- kfree(pxa);
return ret;
}
@@ -246,14 +239,12 @@
{
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
- struct sdhci_pxa *pxa = pltfm_host->priv;
sdhci_remove_host(host, 1);
clk_disable_unprepare(pltfm_host->clk);
clk_put(pltfm_host->clk);
sdhci_pltfm_free(pdev);
- kfree(pxa);
return 0;
}
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index 5036d7d..ad0bada 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -58,6 +58,12 @@
#define SDCE_MISC_INT (1<<2)
#define SDCE_MISC_INT_EN (1<<1)
+struct sdhci_pxa {
+ struct clk *clk_core;
+ struct clk *clk_io;
+ u8 power_mode;
+};
+
/*
* These registers are relative to the second register region, for the
* MBus bridge.
@@ -211,6 +217,7 @@
case MMC_TIMING_UHS_SDR104:
ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180;
break;
+ case MMC_TIMING_MMC_DDR52:
case MMC_TIMING_UHS_DDR50:
ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180;
break;
@@ -283,9 +290,7 @@
struct sdhci_host *host = NULL;
struct sdhci_pxa *pxa = NULL;
const struct of_device_id *match;
-
int ret;
- struct clk *clk;
pxa = devm_kzalloc(&pdev->dev, sizeof(struct sdhci_pxa), GFP_KERNEL);
if (!pxa)
@@ -305,14 +310,20 @@
pltfm_host = sdhci_priv(host);
pltfm_host->priv = pxa;
- clk = devm_clk_get(dev, NULL);
- if (IS_ERR(clk)) {
+ pxa->clk_io = devm_clk_get(dev, "io");
+ if (IS_ERR(pxa->clk_io))
+ pxa->clk_io = devm_clk_get(dev, NULL);
+ if (IS_ERR(pxa->clk_io)) {
dev_err(dev, "failed to get io clock\n");
- ret = PTR_ERR(clk);
+ ret = PTR_ERR(pxa->clk_io);
goto err_clk_get;
}
- pltfm_host->clk = clk;
- clk_prepare_enable(clk);
+ pltfm_host->clk = pxa->clk_io;
+ clk_prepare_enable(pxa->clk_io);
+
+ pxa->clk_core = devm_clk_get(dev, "core");
+ if (!IS_ERR(pxa->clk_core))
+ clk_prepare_enable(pxa->clk_core);
/* enable 1/8V DDR capable */
host->mmc->caps |= MMC_CAP_1_8V_DDR;
@@ -385,7 +396,9 @@
pm_runtime_disable(&pdev->dev);
err_of_parse:
err_cd_req:
- clk_disable_unprepare(clk);
+ clk_disable_unprepare(pxa->clk_io);
+ if (!IS_ERR(pxa->clk_core))
+ clk_disable_unprepare(pxa->clk_core);
err_clk_get:
err_mbus_win:
sdhci_pltfm_free(pdev);
@@ -396,12 +409,15 @@
{
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_pxa *pxa = pltfm_host->priv;
pm_runtime_get_sync(&pdev->dev);
sdhci_remove_host(host, 1);
pm_runtime_disable(&pdev->dev);
- clk_disable_unprepare(pltfm_host->clk);
+ clk_disable_unprepare(pxa->clk_io);
+ if (!IS_ERR(pxa->clk_core))
+ clk_disable_unprepare(pxa->clk_core);
sdhci_pltfm_free(pdev);
@@ -441,15 +457,16 @@
{
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_pxa *pxa = pltfm_host->priv;
unsigned long flags;
- if (pltfm_host->clk) {
- spin_lock_irqsave(&host->lock, flags);
- host->runtime_suspended = true;
- spin_unlock_irqrestore(&host->lock, flags);
+ spin_lock_irqsave(&host->lock, flags);
+ host->runtime_suspended = true;
+ spin_unlock_irqrestore(&host->lock, flags);
- clk_disable_unprepare(pltfm_host->clk);
- }
+ clk_disable_unprepare(pxa->clk_io);
+ if (!IS_ERR(pxa->clk_core))
+ clk_disable_unprepare(pxa->clk_core);
return 0;
}
@@ -458,15 +475,16 @@
{
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_pxa *pxa = pltfm_host->priv;
unsigned long flags;
- if (pltfm_host->clk) {
- clk_prepare_enable(pltfm_host->clk);
+ clk_prepare_enable(pxa->clk_io);
+ if (!IS_ERR(pxa->clk_core))
+ clk_prepare_enable(pxa->clk_core);
- spin_lock_irqsave(&host->lock, flags);
- host->runtime_suspended = false;
- spin_unlock_irqrestore(&host->lock, flags);
- }
+ spin_lock_irqsave(&host->lock, flags);
+ host->runtime_suspended = false;
+ spin_unlock_irqrestore(&host->lock, flags);
return 0;
}
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 0ce6eb1..4f7a6321 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -300,6 +300,7 @@
struct device *dev = &ourhost->pdev->dev;
unsigned long timeout;
u16 clk = 0;
+ int ret;
host->mmc->actual_clock = 0;
@@ -311,7 +312,12 @@
sdhci_s3c_set_clock(host, clock);
- clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
+ ret = clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
+ if (ret != 0) {
+ dev_err(dev, "%s: failed to set clock rate %uHz\n",
+ mmc_hostname(host->mmc), clock);
+ return;
+ }
clk = SDHCI_CLOCK_INT_EN;
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index ada1a3e..73de62a 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -44,8 +44,6 @@
#define MAX_TUNING_LOOP 40
-#define ADMA_SIZE ((128 * 2 + 1) * 4)
-
static unsigned int debug_quirks = 0;
static unsigned int debug_quirks2;
@@ -119,10 +117,17 @@
pr_debug(DRIVER_NAME ": Host ctl2: 0x%08x\n",
sdhci_readw(host, SDHCI_HOST_CONTROL2));
- if (host->flags & SDHCI_USE_ADMA)
- pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
- readl(host->ioaddr + SDHCI_ADMA_ERROR),
- readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
+ if (host->flags & SDHCI_USE_ADMA) {
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x%08x\n",
+ readl(host->ioaddr + SDHCI_ADMA_ERROR),
+ readl(host->ioaddr + SDHCI_ADMA_ADDRESS_HI),
+ readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
+ else
+ pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
+ readl(host->ioaddr + SDHCI_ADMA_ERROR),
+ readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
+ }
pr_debug(DRIVER_NAME ": ===========================================\n");
}
@@ -448,18 +453,26 @@
local_irq_restore(*flags);
}
-static void sdhci_set_adma_desc(u8 *desc, u32 addr, int len, unsigned cmd)
+static void sdhci_adma_write_desc(struct sdhci_host *host, void *desc,
+ dma_addr_t addr, int len, unsigned cmd)
{
- __le32 *dataddr = (__le32 __force *)(desc + 4);
- __le16 *cmdlen = (__le16 __force *)desc;
+ struct sdhci_adma2_64_desc *dma_desc = desc;
- /* SDHCI specification says ADMA descriptors should be 4 byte
- * aligned, so using 16 or 32bit operations should be safe. */
+ /* 32-bit and 64-bit descriptors have these members in same position */
+ dma_desc->cmd = cpu_to_le16(cmd);
+ dma_desc->len = cpu_to_le16(len);
+ dma_desc->addr_lo = cpu_to_le32((u32)addr);
- cmdlen[0] = cpu_to_le16(cmd);
- cmdlen[1] = cpu_to_le16(len);
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ dma_desc->addr_hi = cpu_to_le32((u64)addr >> 32);
+}
- dataddr[0] = cpu_to_le32(addr);
+static void sdhci_adma_mark_end(void *desc)
+{
+ struct sdhci_adma2_64_desc *dma_desc = desc;
+
+ /* 32-bit and 64-bit descriptors have 'cmd' in same position */
+ dma_desc->cmd |= cpu_to_le16(ADMA2_END);
}
static int sdhci_adma_table_pre(struct sdhci_host *host,
@@ -467,8 +480,8 @@
{
int direction;
- u8 *desc;
- u8 *align;
+ void *desc;
+ void *align;
dma_addr_t addr;
dma_addr_t align_addr;
int len, offset;
@@ -489,17 +502,17 @@
direction = DMA_TO_DEVICE;
host->align_addr = dma_map_single(mmc_dev(host->mmc),
- host->align_buffer, 128 * 4, direction);
+ host->align_buffer, host->align_buffer_sz, direction);
if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr))
goto fail;
- BUG_ON(host->align_addr & 0x3);
+ BUG_ON(host->align_addr & host->align_mask);
host->sg_count = dma_map_sg(mmc_dev(host->mmc),
data->sg, data->sg_len, direction);
if (host->sg_count == 0)
goto unmap_align;
- desc = host->adma_desc;
+ desc = host->adma_table;
align = host->align_buffer;
align_addr = host->align_addr;
@@ -515,24 +528,27 @@
* the (up to three) bytes that screw up the
* alignment.
*/
- offset = (4 - (addr & 0x3)) & 0x3;
+ offset = (host->align_sz - (addr & host->align_mask)) &
+ host->align_mask;
if (offset) {
if (data->flags & MMC_DATA_WRITE) {
buffer = sdhci_kmap_atomic(sg, &flags);
- WARN_ON(((long)buffer & PAGE_MASK) > (PAGE_SIZE - 3));
+ WARN_ON(((long)buffer & (PAGE_SIZE - 1)) >
+ (PAGE_SIZE - offset));
memcpy(align, buffer, offset);
sdhci_kunmap_atomic(buffer, &flags);
}
/* tran, valid */
- sdhci_set_adma_desc(desc, align_addr, offset, 0x21);
+ sdhci_adma_write_desc(host, desc, align_addr, offset,
+ ADMA2_TRAN_VALID);
BUG_ON(offset > 65536);
- align += 4;
- align_addr += 4;
+ align += host->align_sz;
+ align_addr += host->align_sz;
- desc += 8;
+ desc += host->desc_sz;
addr += offset;
len -= offset;
@@ -541,23 +557,23 @@
BUG_ON(len > 65536);
/* tran, valid */
- sdhci_set_adma_desc(desc, addr, len, 0x21);
- desc += 8;
+ sdhci_adma_write_desc(host, desc, addr, len, ADMA2_TRAN_VALID);
+ desc += host->desc_sz;
/*
* If this triggers then we have a calculation bug
* somewhere. :/
*/
- WARN_ON((desc - host->adma_desc) > ADMA_SIZE);
+ WARN_ON((desc - host->adma_table) >= host->adma_table_sz);
}
if (host->quirks & SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC) {
/*
* Mark the last descriptor as the terminating descriptor
*/
- if (desc != host->adma_desc) {
- desc -= 8;
- desc[0] |= 0x2; /* end */
+ if (desc != host->adma_table) {
+ desc -= host->desc_sz;
+ sdhci_adma_mark_end(desc);
}
} else {
/*
@@ -565,7 +581,7 @@
*/
/* nop, end, valid */
- sdhci_set_adma_desc(desc, 0, 0, 0x3);
+ sdhci_adma_write_desc(host, desc, 0, 0, ADMA2_NOP_END_VALID);
}
/*
@@ -573,14 +589,14 @@
*/
if (data->flags & MMC_DATA_WRITE) {
dma_sync_single_for_device(mmc_dev(host->mmc),
- host->align_addr, 128 * 4, direction);
+ host->align_addr, host->align_buffer_sz, direction);
}
return 0;
unmap_align:
dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
- 128 * 4, direction);
+ host->align_buffer_sz, direction);
fail:
return -EINVAL;
}
@@ -592,7 +608,7 @@
struct scatterlist *sg;
int i, size;
- u8 *align;
+ void *align;
char *buffer;
unsigned long flags;
bool has_unaligned;
@@ -603,12 +619,12 @@
direction = DMA_TO_DEVICE;
dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
- 128 * 4, direction);
+ host->align_buffer_sz, direction);
/* Do a quick scan of the SG list for any unaligned mappings */
has_unaligned = false;
for_each_sg(data->sg, sg, host->sg_count, i)
- if (sg_dma_address(sg) & 3) {
+ if (sg_dma_address(sg) & host->align_mask) {
has_unaligned = true;
break;
}
@@ -620,15 +636,17 @@
align = host->align_buffer;
for_each_sg(data->sg, sg, host->sg_count, i) {
- if (sg_dma_address(sg) & 0x3) {
- size = 4 - (sg_dma_address(sg) & 0x3);
+ if (sg_dma_address(sg) & host->align_mask) {
+ size = host->align_sz -
+ (sg_dma_address(sg) & host->align_mask);
buffer = sdhci_kmap_atomic(sg, &flags);
- WARN_ON(((long)buffer & PAGE_MASK) > (PAGE_SIZE - 3));
+ WARN_ON(((long)buffer & (PAGE_SIZE - 1)) >
+ (PAGE_SIZE - size));
memcpy(buffer, align, size);
sdhci_kunmap_atomic(buffer, &flags);
- align += 4;
+ align += host->align_sz;
}
}
}
@@ -822,6 +840,10 @@
} else {
sdhci_writel(host, host->adma_addr,
SDHCI_ADMA_ADDRESS);
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ sdhci_writel(host,
+ (u64)host->adma_addr >> 32,
+ SDHCI_ADMA_ADDRESS_HI);
}
} else {
int sg_cnt;
@@ -855,10 +877,14 @@
ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
ctrl &= ~SDHCI_CTRL_DMA_MASK;
if ((host->flags & SDHCI_REQ_USE_DMA) &&
- (host->flags & SDHCI_USE_ADMA))
- ctrl |= SDHCI_CTRL_ADMA32;
- else
+ (host->flags & SDHCI_USE_ADMA)) {
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ ctrl |= SDHCI_CTRL_ADMA64;
+ else
+ ctrl |= SDHCI_CTRL_ADMA32;
+ } else {
ctrl |= SDHCI_CTRL_SDMA;
+ }
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
}
@@ -889,10 +915,15 @@
struct mmc_data *data = cmd->data;
if (data == NULL) {
+ if (host->quirks2 &
+ SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD) {
+ sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE);
+ } else {
/* clear Auto CMD settings for no data CMDs */
- mode = sdhci_readw(host, SDHCI_TRANSFER_MODE);
- sdhci_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 |
+ mode = sdhci_readw(host, SDHCI_TRANSFER_MODE);
+ sdhci_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 |
SDHCI_TRNS_AUTO_CMD23), SDHCI_TRANSFER_MODE);
+ }
return;
}
@@ -1117,6 +1148,9 @@
case MMC_TIMING_UHS_DDR50:
preset = sdhci_readw(host, SDHCI_PRESET_FOR_DDR50);
break;
+ case MMC_TIMING_MMC_HS400:
+ preset = sdhci_readw(host, SDHCI_PRESET_FOR_HS400);
+ break;
default:
pr_warn("%s: Invalid UHS-I mode selected\n",
mmc_hostname(host->mmc));
@@ -1444,6 +1478,8 @@
else if ((timing == MMC_TIMING_UHS_DDR50) ||
(timing == MMC_TIMING_MMC_DDR52))
ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
+ else if (timing == MMC_TIMING_MMC_HS400)
+ ctrl_2 |= SDHCI_CTRL_HS400; /* Non-standard */
sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
}
EXPORT_SYMBOL_GPL(sdhci_set_uhs_signaling);
@@ -1515,7 +1551,8 @@
u16 clk, ctrl_2;
/* In case of UHS-I modes, set High Speed Enable */
- if ((ios->timing == MMC_TIMING_MMC_HS200) ||
+ if ((ios->timing == MMC_TIMING_MMC_HS400) ||
+ (ios->timing == MMC_TIMING_MMC_HS200) ||
(ios->timing == MMC_TIMING_MMC_DDR52) ||
(ios->timing == MMC_TIMING_UHS_SDR50) ||
(ios->timing == MMC_TIMING_UHS_SDR104) ||
@@ -1862,6 +1899,7 @@
* tuning function has to be executed.
*/
switch (host->timing) {
+ case MMC_TIMING_MMC_HS400:
case MMC_TIMING_MMC_HS200:
case MMC_TIMING_UHS_SDR104:
break;
@@ -2144,9 +2182,10 @@
*/
if (!(host->flags & SDHCI_DEVICE_DEAD) &&
((mrq->cmd && mrq->cmd->error) ||
- (mrq->data && (mrq->data->error ||
- (mrq->data->stop && mrq->data->stop->error))) ||
- (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {
+ (mrq->sbc && mrq->sbc->error) ||
+ (mrq->data && ((mrq->data->error && !mrq->data->stop) ||
+ (mrq->data->stop && mrq->data->stop->error))) ||
+ (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {
/* Some controllers need this kick or reset won't work here */
if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET)
@@ -2282,32 +2321,36 @@
}
#ifdef CONFIG_MMC_DEBUG
-static void sdhci_show_adma_error(struct sdhci_host *host)
+static void sdhci_adma_show_error(struct sdhci_host *host)
{
const char *name = mmc_hostname(host->mmc);
- u8 *desc = host->adma_desc;
- __le32 *dma;
- __le16 *len;
- u8 attr;
+ void *desc = host->adma_table;
sdhci_dumpregs(host);
while (true) {
- dma = (__le32 *)(desc + 4);
- len = (__le16 *)(desc + 2);
- attr = *desc;
+ struct sdhci_adma2_64_desc *dma_desc = desc;
- DBG("%s: %p: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n",
- name, desc, le32_to_cpu(*dma), le16_to_cpu(*len), attr);
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ DBG("%s: %p: DMA 0x%08x%08x, LEN 0x%04x, Attr=0x%02x\n",
+ name, desc, le32_to_cpu(dma_desc->addr_hi),
+ le32_to_cpu(dma_desc->addr_lo),
+ le16_to_cpu(dma_desc->len),
+ le16_to_cpu(dma_desc->cmd));
+ else
+ DBG("%s: %p: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n",
+ name, desc, le32_to_cpu(dma_desc->addr_lo),
+ le16_to_cpu(dma_desc->len),
+ le16_to_cpu(dma_desc->cmd));
- desc += 8;
+ desc += host->desc_sz;
- if (attr & 2)
+ if (dma_desc->cmd & cpu_to_le16(ADMA2_END))
break;
}
}
#else
-static void sdhci_show_adma_error(struct sdhci_host *host) { }
+static void sdhci_adma_show_error(struct sdhci_host *host) { }
#endif
static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
@@ -2370,7 +2413,7 @@
host->data->error = -EILSEQ;
else if (intmask & SDHCI_INT_ADMA_ERROR) {
pr_err("%s: ADMA error\n", mmc_hostname(host->mmc));
- sdhci_show_adma_error(host);
+ sdhci_adma_show_error(host);
host->data->error = -EIO;
if (host->ops->adma_workaround)
host->ops->adma_workaround(host, intmask);
@@ -2849,6 +2892,16 @@
host->flags &= ~SDHCI_USE_ADMA;
}
+ /*
+ * It is assumed that a 64-bit capable device has set a 64-bit DMA mask
+ * and *must* do 64-bit DMA. A driver has the opportunity to change
+ * that during the first call to ->enable_dma(). Similarly
+ * SDHCI_QUIRK2_BROKEN_64_BIT_DMA must be left to the drivers to
+ * implement.
+ */
+ if (sdhci_readl(host, SDHCI_CAPABILITIES) & SDHCI_CAN_64BIT)
+ host->flags |= SDHCI_USE_64_BIT_DMA;
+
if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
if (host->ops->enable_dma) {
if (host->ops->enable_dma(host)) {
@@ -2860,33 +2913,56 @@
}
}
+ /* SDMA does not support 64-bit DMA */
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ host->flags &= ~SDHCI_USE_SDMA;
+
if (host->flags & SDHCI_USE_ADMA) {
/*
- * We need to allocate descriptors for all sg entries
- * (128) and potentially one alignment transfer for
- * each of those entries.
+ * The DMA descriptor table size is calculated as the maximum
+ * number of segments times 2, to allow for an alignment
+ * descriptor for each segment, plus 1 for a nop end descriptor,
+ * all multipled by the descriptor size.
*/
- host->adma_desc = dma_alloc_coherent(mmc_dev(mmc),
- ADMA_SIZE, &host->adma_addr,
- GFP_KERNEL);
- host->align_buffer = kmalloc(128 * 4, GFP_KERNEL);
- if (!host->adma_desc || !host->align_buffer) {
- dma_free_coherent(mmc_dev(mmc), ADMA_SIZE,
- host->adma_desc, host->adma_addr);
+ if (host->flags & SDHCI_USE_64_BIT_DMA) {
+ host->adma_table_sz = (SDHCI_MAX_SEGS * 2 + 1) *
+ SDHCI_ADMA2_64_DESC_SZ;
+ host->align_buffer_sz = SDHCI_MAX_SEGS *
+ SDHCI_ADMA2_64_ALIGN;
+ host->desc_sz = SDHCI_ADMA2_64_DESC_SZ;
+ host->align_sz = SDHCI_ADMA2_64_ALIGN;
+ host->align_mask = SDHCI_ADMA2_64_ALIGN - 1;
+ } else {
+ host->adma_table_sz = (SDHCI_MAX_SEGS * 2 + 1) *
+ SDHCI_ADMA2_32_DESC_SZ;
+ host->align_buffer_sz = SDHCI_MAX_SEGS *
+ SDHCI_ADMA2_32_ALIGN;
+ host->desc_sz = SDHCI_ADMA2_32_DESC_SZ;
+ host->align_sz = SDHCI_ADMA2_32_ALIGN;
+ host->align_mask = SDHCI_ADMA2_32_ALIGN - 1;
+ }
+ host->adma_table = dma_alloc_coherent(mmc_dev(mmc),
+ host->adma_table_sz,
+ &host->adma_addr,
+ GFP_KERNEL);
+ host->align_buffer = kmalloc(host->align_buffer_sz, GFP_KERNEL);
+ if (!host->adma_table || !host->align_buffer) {
+ dma_free_coherent(mmc_dev(mmc), host->adma_table_sz,
+ host->adma_table, host->adma_addr);
kfree(host->align_buffer);
pr_warn("%s: Unable to allocate ADMA buffers - falling back to standard DMA\n",
mmc_hostname(mmc));
host->flags &= ~SDHCI_USE_ADMA;
- host->adma_desc = NULL;
+ host->adma_table = NULL;
host->align_buffer = NULL;
- } else if (host->adma_addr & 3) {
+ } else if (host->adma_addr & host->align_mask) {
pr_warn("%s: unable to allocate aligned ADMA descriptor\n",
mmc_hostname(mmc));
host->flags &= ~SDHCI_USE_ADMA;
- dma_free_coherent(mmc_dev(mmc), ADMA_SIZE,
- host->adma_desc, host->adma_addr);
+ dma_free_coherent(mmc_dev(mmc), host->adma_table_sz,
+ host->adma_table, host->adma_addr);
kfree(host->align_buffer);
- host->adma_desc = NULL;
+ host->adma_table = NULL;
host->align_buffer = NULL;
}
}
@@ -3027,7 +3103,7 @@
if (ret) {
pr_warn("%s: Failed to enable vqmmc regulator: %d\n",
mmc_hostname(mmc), ret);
- mmc->supply.vqmmc = NULL;
+ mmc->supply.vqmmc = ERR_PTR(-EINVAL);
}
}
@@ -3046,16 +3122,21 @@
/* SD3.0: SDR104 is supported so (for eMMC) the caps2
* field can be promoted to support HS200.
*/
- if (!(host->quirks2 & SDHCI_QUIRK2_BROKEN_HS200)) {
+ if (!(host->quirks2 & SDHCI_QUIRK2_BROKEN_HS200))
mmc->caps2 |= MMC_CAP2_HS200;
- if (IS_ERR(mmc->supply.vqmmc) ||
- !regulator_is_supported_voltage
- (mmc->supply.vqmmc, 1100000, 1300000))
- mmc->caps2 &= ~MMC_CAP2_HS200_1_2V_SDR;
- }
} else if (caps[1] & SDHCI_SUPPORT_SDR50)
mmc->caps |= MMC_CAP_UHS_SDR50;
+ if (host->quirks2 & SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 &&
+ (caps[1] & SDHCI_SUPPORT_HS400))
+ mmc->caps2 |= MMC_CAP2_HS400;
+
+ if ((mmc->caps2 & MMC_CAP2_HSX00_1_2V) &&
+ (IS_ERR(mmc->supply.vqmmc) ||
+ !regulator_is_supported_voltage(mmc->supply.vqmmc, 1100000,
+ 1300000)))
+ mmc->caps2 &= ~MMC_CAP2_HSX00_1_2V;
+
if ((caps[1] & SDHCI_SUPPORT_DDR50) &&
!(host->quirks2 & SDHCI_QUIRK2_BROKEN_DDR50))
mmc->caps |= MMC_CAP_UHS_DDR50;
@@ -3175,11 +3256,11 @@
* can do scatter/gather or not.
*/
if (host->flags & SDHCI_USE_ADMA)
- mmc->max_segs = 128;
+ mmc->max_segs = SDHCI_MAX_SEGS;
else if (host->flags & SDHCI_USE_SDMA)
mmc->max_segs = 1;
else /* PIO */
- mmc->max_segs = 128;
+ mmc->max_segs = SDHCI_MAX_SEGS;
/*
* Maximum number of sectors in one transfer. Limited by DMA boundary
@@ -3277,7 +3358,8 @@
pr_info("%s: SDHCI controller on %s [%s] using %s\n",
mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
- (host->flags & SDHCI_USE_ADMA) ? "ADMA" :
+ (host->flags & SDHCI_USE_ADMA) ?
+ (host->flags & SDHCI_USE_64_BIT_DMA) ? "ADMA 64-bit" : "ADMA" :
(host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
sdhci_enable_card_detection(host);
@@ -3339,18 +3421,15 @@
tasklet_kill(&host->finish_tasklet);
- if (!IS_ERR(mmc->supply.vmmc))
- regulator_disable(mmc->supply.vmmc);
-
if (!IS_ERR(mmc->supply.vqmmc))
regulator_disable(mmc->supply.vqmmc);
- if (host->adma_desc)
- dma_free_coherent(mmc_dev(mmc), ADMA_SIZE,
- host->adma_desc, host->adma_addr);
+ if (host->adma_table)
+ dma_free_coherent(mmc_dev(mmc), host->adma_table_sz,
+ host->adma_table, host->adma_addr);
kfree(host->align_buffer);
- host->adma_desc = NULL;
+ host->adma_table = NULL;
host->align_buffer = NULL;
}
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 31896a7..ddd31cd 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -161,7 +161,7 @@
#define SDHCI_CTRL_UHS_SDR50 0x0002
#define SDHCI_CTRL_UHS_SDR104 0x0003
#define SDHCI_CTRL_UHS_DDR50 0x0004
-#define SDHCI_CTRL_HS_SDR200 0x0005 /* reserved value in SDIO spec */
+#define SDHCI_CTRL_HS400 0x0005 /* Non-standard */
#define SDHCI_CTRL_VDD_180 0x0008
#define SDHCI_CTRL_DRV_TYPE_MASK 0x0030
#define SDHCI_CTRL_DRV_TYPE_B 0x0000
@@ -204,6 +204,7 @@
#define SDHCI_RETUNING_MODE_SHIFT 14
#define SDHCI_CLOCK_MUL_MASK 0x00FF0000
#define SDHCI_CLOCK_MUL_SHIFT 16
+#define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */
#define SDHCI_CAPABILITIES_1 0x44
@@ -227,6 +228,7 @@
/* 55-57 reserved */
#define SDHCI_ADMA_ADDRESS 0x58
+#define SDHCI_ADMA_ADDRESS_HI 0x5C
/* 60-FB reserved */
@@ -235,6 +237,7 @@
#define SDHCI_PRESET_FOR_SDR50 0x6A
#define SDHCI_PRESET_FOR_SDR104 0x6C
#define SDHCI_PRESET_FOR_DDR50 0x6E
+#define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */
#define SDHCI_PRESET_DRV_MASK 0xC000
#define SDHCI_PRESET_DRV_SHIFT 14
#define SDHCI_PRESET_CLKGEN_SEL_MASK 0x400
@@ -266,6 +269,46 @@
#define SDHCI_DEFAULT_BOUNDARY_SIZE (512 * 1024)
#define SDHCI_DEFAULT_BOUNDARY_ARG (ilog2(SDHCI_DEFAULT_BOUNDARY_SIZE) - 12)
+/* ADMA2 32-bit DMA descriptor size */
+#define SDHCI_ADMA2_32_DESC_SZ 8
+
+/* ADMA2 32-bit DMA alignment */
+#define SDHCI_ADMA2_32_ALIGN 4
+
+/* ADMA2 32-bit descriptor */
+struct sdhci_adma2_32_desc {
+ __le16 cmd;
+ __le16 len;
+ __le32 addr;
+} __packed __aligned(SDHCI_ADMA2_32_ALIGN);
+
+/* ADMA2 64-bit DMA descriptor size */
+#define SDHCI_ADMA2_64_DESC_SZ 12
+
+/* ADMA2 64-bit DMA alignment */
+#define SDHCI_ADMA2_64_ALIGN 8
+
+/*
+ * ADMA2 64-bit descriptor. Note 12-byte descriptor can't always be 8-byte
+ * aligned.
+ */
+struct sdhci_adma2_64_desc {
+ __le16 cmd;
+ __le16 len;
+ __le32 addr_lo;
+ __le32 addr_hi;
+} __packed __aligned(4);
+
+#define ADMA2_TRAN_VALID 0x21
+#define ADMA2_NOP_END_VALID 0x3
+#define ADMA2_END 0x2
+
+/*
+ * Maximum segments assuming a 512KiB maximum requisition size and a minimum
+ * 4KiB page size.
+ */
+#define SDHCI_MAX_SEGS 128
+
struct sdhci_ops {
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
u32 (*read_l)(struct sdhci_host *host, int reg);
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index d1663b3..15cb8b7 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -21,7 +21,6 @@
#include <linux/err.h>
#include <linux/clk.h>
-#include <linux/clk-private.h>
#include <linux/clk/sunxi.h>
#include <linux/gpio.h>
diff --git a/drivers/mmc/host/toshsd.c b/drivers/mmc/host/toshsd.c
new file mode 100644
index 0000000..4666262
--- /dev/null
+++ b/drivers/mmc/host/toshsd.c
@@ -0,0 +1,717 @@
+/*
+ * Toshiba PCI Secure Digital Host Controller Interface driver
+ *
+ * Copyright (C) 2014 Ondrej Zary
+ * Copyright (C) 2007 Richard Betts, All Rights Reserved.
+ *
+ * Based on asic3_mmc.c, copyright (c) 2005 SDG Systems, LLC and,
+ * sdhci.c, copyright (C) 2005-2006 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/scatterlist.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/pm.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+
+#include "toshsd.h"
+
+#define DRIVER_NAME "toshsd"
+
+static const struct pci_device_id pci_ids[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA, 0x0805) },
+ { /* end: all zeroes */ },
+};
+
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+static void toshsd_init(struct toshsd_host *host)
+{
+ /* enable clock */
+ pci_write_config_byte(host->pdev, SD_PCICFG_CLKSTOP,
+ SD_PCICFG_CLKSTOP_ENABLE_ALL);
+ pci_write_config_byte(host->pdev, SD_PCICFG_CARDDETECT, 2);
+
+ /* reset */
+ iowrite16(0, host->ioaddr + SD_SOFTWARERESET); /* assert */
+ mdelay(2);
+ iowrite16(1, host->ioaddr + SD_SOFTWARERESET); /* deassert */
+ mdelay(2);
+
+ /* Clear card registers */
+ iowrite16(0, host->ioaddr + SD_CARDCLOCKCTRL);
+ iowrite32(0, host->ioaddr + SD_CARDSTATUS);
+ iowrite32(0, host->ioaddr + SD_ERRORSTATUS0);
+ iowrite16(0, host->ioaddr + SD_STOPINTERNAL);
+
+ /* SDIO clock? */
+ iowrite16(0x100, host->ioaddr + SDIO_BASE + SDIO_CLOCKNWAITCTRL);
+
+ /* enable LED */
+ pci_write_config_byte(host->pdev, SD_PCICFG_SDLED_ENABLE1,
+ SD_PCICFG_LED_ENABLE1_START);
+ pci_write_config_byte(host->pdev, SD_PCICFG_SDLED_ENABLE2,
+ SD_PCICFG_LED_ENABLE2_START);
+
+ /* set interrupt masks */
+ iowrite32(~(u32)(SD_CARD_RESP_END | SD_CARD_RW_END
+ | SD_CARD_CARD_REMOVED_0 | SD_CARD_CARD_INSERTED_0
+ | SD_BUF_READ_ENABLE | SD_BUF_WRITE_ENABLE
+ | SD_BUF_CMD_TIMEOUT),
+ host->ioaddr + SD_INTMASKCARD);
+
+ iowrite16(0x1000, host->ioaddr + SD_TRANSACTIONCTRL);
+}
+
+/* Set MMC clock / power.
+ * Note: This controller uses a simple divider scheme therefore it cannot run
+ * SD/MMC cards at full speed (24/20MHz). HCLK (=33MHz PCI clock?) is too high
+ * and the next slowest is 16MHz (div=2).
+ */
+static void __toshsd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct toshsd_host *host = mmc_priv(mmc);
+
+ if (ios->clock) {
+ u16 clk;
+ int div = 1;
+
+ while (ios->clock < HCLK / div)
+ div *= 2;
+
+ clk = div >> 2;
+
+ if (div == 1) { /* disable the divider */
+ pci_write_config_byte(host->pdev, SD_PCICFG_CLKMODE,
+ SD_PCICFG_CLKMODE_DIV_DISABLE);
+ clk |= SD_CARDCLK_DIV_DISABLE;
+ } else
+ pci_write_config_byte(host->pdev, SD_PCICFG_CLKMODE, 0);
+
+ clk |= SD_CARDCLK_ENABLE_CLOCK;
+ iowrite16(clk, host->ioaddr + SD_CARDCLOCKCTRL);
+
+ mdelay(10);
+ } else
+ iowrite16(0, host->ioaddr + SD_CARDCLOCKCTRL);
+
+ switch (ios->power_mode) {
+ case MMC_POWER_OFF:
+ pci_write_config_byte(host->pdev, SD_PCICFG_POWER1,
+ SD_PCICFG_PWR1_OFF);
+ mdelay(1);
+ break;
+ case MMC_POWER_UP:
+ break;
+ case MMC_POWER_ON:
+ pci_write_config_byte(host->pdev, SD_PCICFG_POWER1,
+ SD_PCICFG_PWR1_33V);
+ pci_write_config_byte(host->pdev, SD_PCICFG_POWER2,
+ SD_PCICFG_PWR2_AUTO);
+ mdelay(20);
+ break;
+ }
+
+ switch (ios->bus_width) {
+ case MMC_BUS_WIDTH_1:
+ iowrite16(SD_CARDOPT_REQUIRED | SD_CARDOPT_DATA_RESP_TIMEOUT(14)
+ | SD_CARDOPT_C2_MODULE_ABSENT
+ | SD_CARDOPT_DATA_XFR_WIDTH_1,
+ host->ioaddr + SD_CARDOPTIONSETUP);
+ break;
+ case MMC_BUS_WIDTH_4:
+ iowrite16(SD_CARDOPT_REQUIRED | SD_CARDOPT_DATA_RESP_TIMEOUT(14)
+ | SD_CARDOPT_C2_MODULE_ABSENT
+ | SD_CARDOPT_DATA_XFR_WIDTH_4,
+ host->ioaddr + SD_CARDOPTIONSETUP);
+ break;
+ }
+}
+
+static void toshsd_set_led(struct toshsd_host *host, unsigned char state)
+{
+ iowrite16(state, host->ioaddr + SDIO_BASE + SDIO_LEDCTRL);
+}
+
+static void toshsd_finish_request(struct toshsd_host *host)
+{
+ struct mmc_request *mrq = host->mrq;
+
+ /* Write something to end the command */
+ host->mrq = NULL;
+ host->cmd = NULL;
+ host->data = NULL;
+
+ toshsd_set_led(host, 0);
+ mmc_request_done(host->mmc, mrq);
+}
+
+static irqreturn_t toshsd_thread_irq(int irq, void *dev_id)
+{
+ struct toshsd_host *host = dev_id;
+ struct mmc_data *data = host->data;
+ struct sg_mapping_iter *sg_miter = &host->sg_miter;
+ unsigned short *buf;
+ int count;
+ unsigned long flags;
+
+ if (!data) {
+ dev_warn(&host->pdev->dev, "Spurious Data IRQ\n");
+ if (host->cmd) {
+ host->cmd->error = -EIO;
+ toshsd_finish_request(host);
+ }
+ return IRQ_NONE;
+ }
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (!sg_miter_next(sg_miter))
+ return IRQ_HANDLED;
+ buf = sg_miter->addr;
+
+ /* Ensure we dont read more than one block. The chip will interrupt us
+ * When the next block is available.
+ */
+ count = sg_miter->length;
+ if (count > data->blksz)
+ count = data->blksz;
+
+ dev_dbg(&host->pdev->dev, "count: %08x, flags %08x\n", count,
+ data->flags);
+
+ /* Transfer the data */
+ if (data->flags & MMC_DATA_READ)
+ ioread32_rep(host->ioaddr + SD_DATAPORT, buf, count >> 2);
+ else
+ iowrite32_rep(host->ioaddr + SD_DATAPORT, buf, count >> 2);
+
+ sg_miter->consumed = count;
+ sg_miter_stop(sg_miter);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static void toshsd_cmd_irq(struct toshsd_host *host)
+{
+ struct mmc_command *cmd = host->cmd;
+ u8 *buf;
+ u16 data;
+
+ if (!host->cmd) {
+ dev_warn(&host->pdev->dev, "Spurious CMD irq\n");
+ return;
+ }
+ buf = (u8 *)cmd->resp;
+ host->cmd = NULL;
+
+ if (cmd->flags & MMC_RSP_PRESENT && cmd->flags & MMC_RSP_136) {
+ /* R2 */
+ buf[12] = 0xff;
+ data = ioread16(host->ioaddr + SD_RESPONSE0);
+ buf[13] = data & 0xff;
+ buf[14] = data >> 8;
+ data = ioread16(host->ioaddr + SD_RESPONSE1);
+ buf[15] = data & 0xff;
+ buf[8] = data >> 8;
+ data = ioread16(host->ioaddr + SD_RESPONSE2);
+ buf[9] = data & 0xff;
+ buf[10] = data >> 8;
+ data = ioread16(host->ioaddr + SD_RESPONSE3);
+ buf[11] = data & 0xff;
+ buf[4] = data >> 8;
+ data = ioread16(host->ioaddr + SD_RESPONSE4);
+ buf[5] = data & 0xff;
+ buf[6] = data >> 8;
+ data = ioread16(host->ioaddr + SD_RESPONSE5);
+ buf[7] = data & 0xff;
+ buf[0] = data >> 8;
+ data = ioread16(host->ioaddr + SD_RESPONSE6);
+ buf[1] = data & 0xff;
+ buf[2] = data >> 8;
+ data = ioread16(host->ioaddr + SD_RESPONSE7);
+ buf[3] = data & 0xff;
+ } else if (cmd->flags & MMC_RSP_PRESENT) {
+ /* R1, R1B, R3, R6, R7 */
+ data = ioread16(host->ioaddr + SD_RESPONSE0);
+ buf[0] = data & 0xff;
+ buf[1] = data >> 8;
+ data = ioread16(host->ioaddr + SD_RESPONSE1);
+ buf[2] = data & 0xff;
+ buf[3] = data >> 8;
+ }
+
+ dev_dbg(&host->pdev->dev, "Command IRQ complete %d %d %x\n",
+ cmd->opcode, cmd->error, cmd->flags);
+
+ /* If there is data to handle we will
+ * finish the request in the mmc_data_end_irq handler.*/
+ if (host->data)
+ return;
+
+ toshsd_finish_request(host);
+}
+
+static void toshsd_data_end_irq(struct toshsd_host *host)
+{
+ struct mmc_data *data = host->data;
+
+ host->data = NULL;
+
+ if (!data) {
+ dev_warn(&host->pdev->dev, "Spurious data end IRQ\n");
+ return;
+ }
+
+ if (data->error == 0)
+ data->bytes_xfered = data->blocks * data->blksz;
+ else
+ data->bytes_xfered = 0;
+
+ dev_dbg(&host->pdev->dev, "Completed data request xfr=%d\n",
+ data->bytes_xfered);
+
+ iowrite16(0, host->ioaddr + SD_STOPINTERNAL);
+
+ toshsd_finish_request(host);
+}
+
+static irqreturn_t toshsd_irq(int irq, void *dev_id)
+{
+ struct toshsd_host *host = dev_id;
+ u32 int_reg, int_mask, int_status, detail;
+ int error = 0, ret = IRQ_HANDLED;
+
+ spin_lock(&host->lock);
+ int_status = ioread32(host->ioaddr + SD_CARDSTATUS);
+ int_mask = ioread32(host->ioaddr + SD_INTMASKCARD);
+ int_reg = int_status & ~int_mask & ~IRQ_DONT_CARE_BITS;
+
+ dev_dbg(&host->pdev->dev, "IRQ status:%x mask:%x\n",
+ int_status, int_mask);
+
+ /* nothing to do: it's not our IRQ */
+ if (!int_reg) {
+ ret = IRQ_NONE;
+ goto irq_end;
+ }
+
+ if (int_reg & SD_BUF_CMD_TIMEOUT) {
+ error = -ETIMEDOUT;
+ dev_dbg(&host->pdev->dev, "Timeout\n");
+ } else if (int_reg & SD_BUF_CRC_ERR) {
+ error = -EILSEQ;
+ dev_err(&host->pdev->dev, "BadCRC\n");
+ } else if (int_reg & (SD_BUF_ILLEGAL_ACCESS
+ | SD_BUF_CMD_INDEX_ERR
+ | SD_BUF_STOP_BIT_END_ERR
+ | SD_BUF_OVERFLOW
+ | SD_BUF_UNDERFLOW
+ | SD_BUF_DATA_TIMEOUT)) {
+ dev_err(&host->pdev->dev, "Buffer status error: { %s%s%s%s%s%s}\n",
+ int_reg & SD_BUF_ILLEGAL_ACCESS ? "ILLEGAL_ACC " : "",
+ int_reg & SD_BUF_CMD_INDEX_ERR ? "CMD_INDEX " : "",
+ int_reg & SD_BUF_STOP_BIT_END_ERR ? "STOPBIT_END " : "",
+ int_reg & SD_BUF_OVERFLOW ? "OVERFLOW " : "",
+ int_reg & SD_BUF_UNDERFLOW ? "UNDERFLOW " : "",
+ int_reg & SD_BUF_DATA_TIMEOUT ? "DATA_TIMEOUT " : "");
+
+ detail = ioread32(host->ioaddr + SD_ERRORSTATUS0);
+ dev_err(&host->pdev->dev, "detail error status { %s%s%s%s%s%s%s%s%s%s%s%s%s}\n",
+ detail & SD_ERR0_RESP_CMD_ERR ? "RESP_CMD " : "",
+ detail & SD_ERR0_RESP_NON_CMD12_END_BIT_ERR ? "RESP_END_BIT " : "",
+ detail & SD_ERR0_RESP_CMD12_END_BIT_ERR ? "RESP_END_BIT " : "",
+ detail & SD_ERR0_READ_DATA_END_BIT_ERR ? "READ_DATA_END_BIT " : "",
+ detail & SD_ERR0_WRITE_CRC_STATUS_END_BIT_ERR ? "WRITE_CMD_END_BIT " : "",
+ detail & SD_ERR0_RESP_NON_CMD12_CRC_ERR ? "RESP_CRC " : "",
+ detail & SD_ERR0_RESP_CMD12_CRC_ERR ? "RESP_CRC " : "",
+ detail & SD_ERR0_READ_DATA_CRC_ERR ? "READ_DATA_CRC " : "",
+ detail & SD_ERR0_WRITE_CMD_CRC_ERR ? "WRITE_CMD_CRC " : "",
+ detail & SD_ERR1_NO_CMD_RESP ? "NO_CMD_RESP " : "",
+ detail & SD_ERR1_TIMEOUT_READ_DATA ? "READ_DATA_TIMEOUT " : "",
+ detail & SD_ERR1_TIMEOUT_CRS_STATUS ? "CRS_STATUS_TIMEOUT " : "",
+ detail & SD_ERR1_TIMEOUT_CRC_BUSY ? "CRC_BUSY_TIMEOUT " : "");
+ error = -EIO;
+ }
+
+ if (error) {
+ if (host->cmd)
+ host->cmd->error = error;
+
+ if (error == -ETIMEDOUT) {
+ iowrite32(int_status &
+ ~(SD_BUF_CMD_TIMEOUT | SD_CARD_RESP_END),
+ host->ioaddr + SD_CARDSTATUS);
+ } else {
+ toshsd_init(host);
+ __toshsd_set_ios(host->mmc, &host->mmc->ios);
+ goto irq_end;
+ }
+ }
+
+ /* Card insert/remove. The mmc controlling code is stateless. */
+ if (int_reg & (SD_CARD_CARD_INSERTED_0 | SD_CARD_CARD_REMOVED_0)) {
+ iowrite32(int_status &
+ ~(SD_CARD_CARD_REMOVED_0 | SD_CARD_CARD_INSERTED_0),
+ host->ioaddr + SD_CARDSTATUS);
+
+ if (int_reg & SD_CARD_CARD_INSERTED_0)
+ toshsd_init(host);
+
+ mmc_detect_change(host->mmc, 1);
+ }
+
+ /* Data transfer */
+ if (int_reg & (SD_BUF_READ_ENABLE | SD_BUF_WRITE_ENABLE)) {
+ iowrite32(int_status &
+ ~(SD_BUF_WRITE_ENABLE | SD_BUF_READ_ENABLE),
+ host->ioaddr + SD_CARDSTATUS);
+
+ ret = IRQ_WAKE_THREAD;
+ goto irq_end;
+ }
+
+ /* Command completion */
+ if (int_reg & SD_CARD_RESP_END) {
+ iowrite32(int_status & ~(SD_CARD_RESP_END),
+ host->ioaddr + SD_CARDSTATUS);
+ toshsd_cmd_irq(host);
+ }
+
+ /* Data transfer completion */
+ if (int_reg & SD_CARD_RW_END) {
+ iowrite32(int_status & ~(SD_CARD_RW_END),
+ host->ioaddr + SD_CARDSTATUS);
+ toshsd_data_end_irq(host);
+ }
+irq_end:
+ spin_unlock(&host->lock);
+ return ret;
+}
+
+static void toshsd_start_cmd(struct toshsd_host *host, struct mmc_command *cmd)
+{
+ struct mmc_data *data = host->data;
+ int c = cmd->opcode;
+
+ dev_dbg(&host->pdev->dev, "Command opcode: %d\n", cmd->opcode);
+
+ if (cmd->opcode == MMC_STOP_TRANSMISSION) {
+ iowrite16(SD_STOPINT_ISSUE_CMD12,
+ host->ioaddr + SD_STOPINTERNAL);
+
+ cmd->resp[0] = cmd->opcode;
+ cmd->resp[1] = 0;
+ cmd->resp[2] = 0;
+ cmd->resp[3] = 0;
+
+ toshsd_finish_request(host);
+ return;
+ }
+
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_NONE:
+ c |= SD_CMD_RESP_TYPE_NONE;
+ break;
+
+ case MMC_RSP_R1:
+ c |= SD_CMD_RESP_TYPE_EXT_R1;
+ break;
+ case MMC_RSP_R1B:
+ c |= SD_CMD_RESP_TYPE_EXT_R1B;
+ break;
+ case MMC_RSP_R2:
+ c |= SD_CMD_RESP_TYPE_EXT_R2;
+ break;
+ case MMC_RSP_R3:
+ c |= SD_CMD_RESP_TYPE_EXT_R3;
+ break;
+
+ default:
+ dev_err(&host->pdev->dev, "Unknown response type %d\n",
+ mmc_resp_type(cmd));
+ break;
+ }
+
+ host->cmd = cmd;
+
+ if (cmd->opcode == MMC_APP_CMD)
+ c |= SD_CMD_TYPE_ACMD;
+
+ if (cmd->opcode == MMC_GO_IDLE_STATE)
+ c |= (3 << 8); /* removed from ipaq-asic3.h for some reason */
+
+ if (data) {
+ c |= SD_CMD_DATA_PRESENT;
+
+ if (data->blocks > 1) {
+ iowrite16(SD_STOPINT_AUTO_ISSUE_CMD12,
+ host->ioaddr + SD_STOPINTERNAL);
+ c |= SD_CMD_MULTI_BLOCK;
+ }
+
+ if (data->flags & MMC_DATA_READ)
+ c |= SD_CMD_TRANSFER_READ;
+
+ /* MMC_DATA_WRITE does not require a bit to be set */
+ }
+
+ /* Send the command */
+ iowrite32(cmd->arg, host->ioaddr + SD_ARG0);
+ iowrite16(c, host->ioaddr + SD_CMD);
+}
+
+static void toshsd_start_data(struct toshsd_host *host, struct mmc_data *data)
+{
+ unsigned int flags = SG_MITER_ATOMIC;
+
+ dev_dbg(&host->pdev->dev, "setup data transfer: blocksize %08x nr_blocks %d, offset: %08x\n",
+ data->blksz, data->blocks, data->sg->offset);
+
+ host->data = data;
+
+ if (data->flags & MMC_DATA_READ)
+ flags |= SG_MITER_TO_SG;
+ else
+ flags |= SG_MITER_FROM_SG;
+
+ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
+
+ /* Set transfer length and blocksize */
+ iowrite16(data->blocks, host->ioaddr + SD_BLOCKCOUNT);
+ iowrite16(data->blksz, host->ioaddr + SD_CARDXFERDATALEN);
+}
+
+/* Process requests from the MMC layer */
+static void toshsd_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct toshsd_host *host = mmc_priv(mmc);
+ unsigned long flags;
+
+ /* abort if card not present */
+ if (!(ioread16(host->ioaddr + SD_CARDSTATUS) & SD_CARD_PRESENT_0)) {
+ mrq->cmd->error = -ENOMEDIUM;
+ mmc_request_done(mmc, mrq);
+ return;
+ }
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ WARN_ON(host->mrq != NULL);
+
+ host->mrq = mrq;
+
+ if (mrq->data)
+ toshsd_start_data(host, mrq->data);
+
+ toshsd_set_led(host, 1);
+
+ toshsd_start_cmd(host, mrq->cmd);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void toshsd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct toshsd_host *host = mmc_priv(mmc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ __toshsd_set_ios(mmc, ios);
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static int toshsd_get_ro(struct mmc_host *mmc)
+{
+ struct toshsd_host *host = mmc_priv(mmc);
+
+ /* active low */
+ return !(ioread16(host->ioaddr + SD_CARDSTATUS) & SD_CARD_WRITE_PROTECT);
+}
+
+static int toshsd_get_cd(struct mmc_host *mmc)
+{
+ struct toshsd_host *host = mmc_priv(mmc);
+
+ return !!(ioread16(host->ioaddr + SD_CARDSTATUS) & SD_CARD_PRESENT_0);
+}
+
+static struct mmc_host_ops toshsd_ops = {
+ .request = toshsd_request,
+ .set_ios = toshsd_set_ios,
+ .get_ro = toshsd_get_ro,
+ .get_cd = toshsd_get_cd,
+};
+
+
+static void toshsd_powerdown(struct toshsd_host *host)
+{
+ /* mask all interrupts */
+ iowrite32(0xffffffff, host->ioaddr + SD_INTMASKCARD);
+ /* disable card clock */
+ iowrite16(0x000, host->ioaddr + SDIO_BASE + SDIO_CLOCKNWAITCTRL);
+ iowrite16(0, host->ioaddr + SD_CARDCLOCKCTRL);
+ /* power down card */
+ pci_write_config_byte(host->pdev, SD_PCICFG_POWER1, SD_PCICFG_PWR1_OFF);
+ /* disable clock */
+ pci_write_config_byte(host->pdev, SD_PCICFG_CLKSTOP, 0);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int toshsd_pm_suspend(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct toshsd_host *host = pci_get_drvdata(pdev);
+
+ toshsd_powerdown(host);
+
+ pci_save_state(pdev);
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ return 0;
+}
+
+static int toshsd_pm_resume(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct toshsd_host *host = pci_get_drvdata(pdev);
+ int ret;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ ret = pci_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ toshsd_init(host);
+
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static int toshsd_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ int ret;
+ struct toshsd_host *host;
+ struct mmc_host *mmc;
+ resource_size_t base;
+
+ ret = pci_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ mmc = mmc_alloc_host(sizeof(struct toshsd_host), &pdev->dev);
+ if (!mmc) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+
+ host->pdev = pdev;
+ pci_set_drvdata(pdev, host);
+
+ ret = pci_request_regions(pdev, DRIVER_NAME);
+ if (ret)
+ goto free;
+
+ host->ioaddr = pci_iomap(pdev, 0, 0);
+ if (!host->ioaddr) {
+ ret = -ENOMEM;
+ goto release;
+ }
+
+ /* Set MMC host parameters */
+ mmc->ops = &toshsd_ops;
+ mmc->caps = MMC_CAP_4_BIT_DATA;
+ mmc->ocr_avail = MMC_VDD_32_33;
+
+ mmc->f_min = HCLK / 512;
+ mmc->f_max = HCLK;
+
+ spin_lock_init(&host->lock);
+
+ toshsd_init(host);
+
+ ret = request_threaded_irq(pdev->irq, toshsd_irq, toshsd_thread_irq,
+ IRQF_SHARED, DRIVER_NAME, host);
+ if (ret)
+ goto unmap;
+
+ mmc_add_host(mmc);
+
+ base = pci_resource_start(pdev, 0);
+ dev_dbg(&pdev->dev, "MMIO %pa, IRQ %d\n", &base, pdev->irq);
+
+ pm_suspend_ignore_children(&pdev->dev, 1);
+
+ return 0;
+
+unmap:
+ pci_iounmap(pdev, host->ioaddr);
+release:
+ pci_release_regions(pdev);
+free:
+ mmc_free_host(mmc);
+ pci_set_drvdata(pdev, NULL);
+err:
+ pci_disable_device(pdev);
+ return ret;
+}
+
+static void toshsd_remove(struct pci_dev *pdev)
+{
+ struct toshsd_host *host = pci_get_drvdata(pdev);
+
+ mmc_remove_host(host->mmc);
+ toshsd_powerdown(host);
+ free_irq(pdev->irq, host);
+ pci_iounmap(pdev, host->ioaddr);
+ pci_release_regions(pdev);
+ mmc_free_host(host->mmc);
+ pci_set_drvdata(pdev, NULL);
+ pci_disable_device(pdev);
+}
+
+static const struct dev_pm_ops toshsd_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(toshsd_pm_suspend, toshsd_pm_resume)
+};
+
+static struct pci_driver toshsd_driver = {
+ .name = DRIVER_NAME,
+ .id_table = pci_ids,
+ .probe = toshsd_probe,
+ .remove = toshsd_remove,
+ .driver.pm = &toshsd_pm_ops,
+};
+
+static int __init toshsd_drv_init(void)
+{
+ return pci_register_driver(&toshsd_driver);
+}
+
+static void __exit toshsd_drv_exit(void)
+{
+ pci_unregister_driver(&toshsd_driver);
+}
+
+module_init(toshsd_drv_init);
+module_exit(toshsd_drv_exit);
+
+MODULE_AUTHOR("Ondrej Zary, Richard Betts");
+MODULE_DESCRIPTION("Toshiba PCI Secure Digital Host Controller Interface driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/host/toshsd.h b/drivers/mmc/host/toshsd.h
new file mode 100644
index 0000000..b6c0d89
--- /dev/null
+++ b/drivers/mmc/host/toshsd.h
@@ -0,0 +1,176 @@
+/*
+ * Toshiba PCI Secure Digital Host Controller Interface driver
+ *
+ * Copyright (C) 2014 Ondrej Zary
+ * Copyright (C) 2007 Richard Betts, All Rights Reserved.
+ *
+ * Based on asic3_mmc.c Copyright (c) 2005 SDG Systems, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#define HCLK 33000000 /* 33 MHz (PCI clock) */
+
+#define SD_PCICFG_CLKSTOP 0x40 /* 0x1f = clock controller, 0 = stop */
+#define SD_PCICFG_GATEDCLK 0x41 /* Gated clock */
+#define SD_PCICFG_CLKMODE 0x42 /* Control clock of SD controller */
+#define SD_PCICFG_PINSTATUS 0x44 /* R/O: read status of SD pins */
+#define SD_PCICFG_POWER1 0x48
+#define SD_PCICFG_POWER2 0x49
+#define SD_PCICFG_POWER3 0x4a
+#define SD_PCICFG_CARDDETECT 0x4c
+#define SD_PCICFG_SLOTS 0x50 /* R/O: define support slot number */
+#define SD_PCICFG_EXTGATECLK1 0xf0 /* Could be used for gated clock */
+#define SD_PCICFG_EXTGATECLK2 0xf1 /* Could be used for gated clock */
+#define SD_PCICFG_EXTGATECLK3 0xf9 /* Bit 1: double buffer/single buffer */
+#define SD_PCICFG_SDLED_ENABLE1 0xfa
+#define SD_PCICFG_SDLED_ENABLE2 0xfe
+
+#define SD_PCICFG_CLKMODE_DIV_DISABLE BIT(0)
+#define SD_PCICFG_CLKSTOP_ENABLE_ALL 0x1f
+#define SD_PCICFG_LED_ENABLE1_START 0x12
+#define SD_PCICFG_LED_ENABLE2_START 0x80
+
+#define SD_PCICFG_PWR1_33V 0x08 /* Set for 3.3 volts */
+#define SD_PCICFG_PWR1_OFF 0x00 /* Turn off power */
+#define SD_PCICFG_PWR2_AUTO 0x02
+
+#define SD_CMD 0x00 /* also for SDIO */
+#define SD_ARG0 0x04 /* also for SDIO */
+#define SD_ARG1 0x06 /* also for SDIO */
+#define SD_STOPINTERNAL 0x08
+#define SD_BLOCKCOUNT 0x0a /* also for SDIO */
+#define SD_RESPONSE0 0x0c /* also for SDIO */
+#define SD_RESPONSE1 0x0e /* also for SDIO */
+#define SD_RESPONSE2 0x10 /* also for SDIO */
+#define SD_RESPONSE3 0x12 /* also for SDIO */
+#define SD_RESPONSE4 0x14 /* also for SDIO */
+#define SD_RESPONSE5 0x16 /* also for SDIO */
+#define SD_RESPONSE6 0x18 /* also for SDIO */
+#define SD_RESPONSE7 0x1a /* also for SDIO */
+#define SD_CARDSTATUS 0x1c /* also for SDIO */
+#define SD_BUFFERCTRL 0x1e /* also for SDIO */
+#define SD_INTMASKCARD 0x20 /* also for SDIO */
+#define SD_INTMASKBUFFER 0x22 /* also for SDIO */
+#define SD_CARDCLOCKCTRL 0x24
+#define SD_CARDXFERDATALEN 0x26 /* also for SDIO */
+#define SD_CARDOPTIONSETUP 0x28 /* also for SDIO */
+#define SD_ERRORSTATUS0 0x2c /* also for SDIO */
+#define SD_ERRORSTATUS1 0x2e /* also for SDIO */
+#define SD_DATAPORT 0x30 /* also for SDIO */
+#define SD_TRANSACTIONCTRL 0x34 /* also for SDIO */
+#define SD_SOFTWARERESET 0xe0 /* also for SDIO */
+
+/* registers above marked "also for SDIO" and all SDIO registers below can be
+ * accessed at SDIO_BASE + reg address */
+#define SDIO_BASE 0x100
+
+#define SDIO_CARDPORTSEL 0x02
+#define SDIO_CARDINTCTRL 0x36
+#define SDIO_CLOCKNWAITCTRL 0x38
+#define SDIO_HOSTINFORMATION 0x3a
+#define SDIO_ERRORCTRL 0x3c
+#define SDIO_LEDCTRL 0x3e
+
+#define SD_TRANSCTL_SET BIT(8)
+
+#define SD_CARDCLK_DIV_DISABLE BIT(15)
+#define SD_CARDCLK_ENABLE_CLOCK BIT(8)
+#define SD_CARDCLK_CLK_DIV_512 BIT(7)
+#define SD_CARDCLK_CLK_DIV_256 BIT(6)
+#define SD_CARDCLK_CLK_DIV_128 BIT(5)
+#define SD_CARDCLK_CLK_DIV_64 BIT(4)
+#define SD_CARDCLK_CLK_DIV_32 BIT(3)
+#define SD_CARDCLK_CLK_DIV_16 BIT(2)
+#define SD_CARDCLK_CLK_DIV_8 BIT(1)
+#define SD_CARDCLK_CLK_DIV_4 BIT(0)
+#define SD_CARDCLK_CLK_DIV_2 0
+
+#define SD_CARDOPT_REQUIRED 0x000e
+#define SD_CARDOPT_DATA_RESP_TIMEOUT(x) (((x) & 0x0f) << 4) /* 4 bits */
+#define SD_CARDOPT_C2_MODULE_ABSENT BIT(14)
+#define SD_CARDOPT_DATA_XFR_WIDTH_1 (1 << 15)
+#define SD_CARDOPT_DATA_XFR_WIDTH_4 (0 << 15)
+
+#define SD_CMD_TYPE_CMD (0 << 6)
+#define SD_CMD_TYPE_ACMD (1 << 6)
+#define SD_CMD_TYPE_AUTHEN (2 << 6)
+#define SD_CMD_RESP_TYPE_NONE (3 << 8)
+#define SD_CMD_RESP_TYPE_EXT_R1 (4 << 8)
+#define SD_CMD_RESP_TYPE_EXT_R1B (5 << 8)
+#define SD_CMD_RESP_TYPE_EXT_R2 (6 << 8)
+#define SD_CMD_RESP_TYPE_EXT_R3 (7 << 8)
+#define SD_CMD_RESP_TYPE_EXT_R6 (4 << 8)
+#define SD_CMD_RESP_TYPE_EXT_R7 (4 << 8)
+#define SD_CMD_DATA_PRESENT BIT(11)
+#define SD_CMD_TRANSFER_READ BIT(12)
+#define SD_CMD_MULTI_BLOCK BIT(13)
+#define SD_CMD_SECURITY_CMD BIT(14)
+
+#define SD_STOPINT_ISSUE_CMD12 BIT(0)
+#define SD_STOPINT_AUTO_ISSUE_CMD12 BIT(8)
+
+#define SD_CARD_RESP_END BIT(0)
+#define SD_CARD_RW_END BIT(2)
+#define SD_CARD_CARD_REMOVED_0 BIT(3)
+#define SD_CARD_CARD_INSERTED_0 BIT(4)
+#define SD_CARD_PRESENT_0 BIT(5)
+#define SD_CARD_UNK6 BIT(6)
+#define SD_CARD_WRITE_PROTECT BIT(7)
+#define SD_CARD_CARD_REMOVED_3 BIT(8)
+#define SD_CARD_CARD_INSERTED_3 BIT(9)
+#define SD_CARD_PRESENT_3 BIT(10)
+
+#define SD_BUF_CMD_INDEX_ERR BIT(16)
+#define SD_BUF_CRC_ERR BIT(17)
+#define SD_BUF_STOP_BIT_END_ERR BIT(18)
+#define SD_BUF_DATA_TIMEOUT BIT(19)
+#define SD_BUF_OVERFLOW BIT(20)
+#define SD_BUF_UNDERFLOW BIT(21)
+#define SD_BUF_CMD_TIMEOUT BIT(22)
+#define SD_BUF_UNK7 BIT(23)
+#define SD_BUF_READ_ENABLE BIT(24)
+#define SD_BUF_WRITE_ENABLE BIT(25)
+#define SD_BUF_ILLEGAL_FUNCTION BIT(29)
+#define SD_BUF_CMD_BUSY BIT(30)
+#define SD_BUF_ILLEGAL_ACCESS BIT(31)
+
+#define SD_ERR0_RESP_CMD_ERR BIT(0)
+#define SD_ERR0_RESP_NON_CMD12_END_BIT_ERR BIT(2)
+#define SD_ERR0_RESP_CMD12_END_BIT_ERR BIT(3)
+#define SD_ERR0_READ_DATA_END_BIT_ERR BIT(4)
+#define SD_ERR0_WRITE_CRC_STATUS_END_BIT_ERR BIT(5)
+#define SD_ERR0_RESP_NON_CMD12_CRC_ERR BIT(8)
+#define SD_ERR0_RESP_CMD12_CRC_ERR BIT(9)
+#define SD_ERR0_READ_DATA_CRC_ERR BIT(10)
+#define SD_ERR0_WRITE_CMD_CRC_ERR BIT(11)
+
+#define SD_ERR1_NO_CMD_RESP BIT(16)
+#define SD_ERR1_TIMEOUT_READ_DATA BIT(20)
+#define SD_ERR1_TIMEOUT_CRS_STATUS BIT(21)
+#define SD_ERR1_TIMEOUT_CRC_BUSY BIT(22)
+
+#define IRQ_DONT_CARE_BITS (SD_CARD_PRESENT_3 \
+ | SD_CARD_WRITE_PROTECT \
+ | SD_CARD_UNK6 \
+ | SD_CARD_PRESENT_0 \
+ | SD_BUF_UNK7 \
+ | SD_BUF_CMD_BUSY)
+
+struct toshsd_host {
+ struct pci_dev *pdev;
+ struct mmc_host *mmc;
+
+ spinlock_t lock;
+
+ struct mmc_request *mrq;/* Current request */
+ struct mmc_command *cmd;/* Current command */
+ struct mmc_data *data; /* Current data request */
+
+ struct sg_mapping_iter sg_miter; /* for PIO */
+
+ void __iomem *ioaddr; /* mapped address */
+};
diff --git a/drivers/net/bonding/bond_netlink.c b/drivers/net/bonding/bond_netlink.c
index c13d83e..45f09a6 100644
--- a/drivers/net/bonding/bond_netlink.c
+++ b/drivers/net/bonding/bond_netlink.c
@@ -225,7 +225,12 @@
bond_option_arp_ip_targets_clear(bond);
nla_for_each_nested(attr, data[IFLA_BOND_ARP_IP_TARGET], rem) {
- __be32 target = nla_get_be32(attr);
+ __be32 target;
+
+ if (nla_len(attr) < sizeof(target))
+ return -EINVAL;
+
+ target = nla_get_be32(attr);
bond_opt_initval(&newval, (__force u64)target);
err = __bond_opt_set(bond, BOND_OPT_ARP_TARGETS,
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 8520d55..279873c 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -2442,9 +2442,13 @@
SUPPORTED_10000baseKR_Full | SUPPORTED_1000baseKX_Full |
SUPPORTED_10000baseKX4_Full;
else if (type == FW_PORT_TYPE_FIBER_XFI ||
- type == FW_PORT_TYPE_FIBER_XAUI || type == FW_PORT_TYPE_SFP)
+ type == FW_PORT_TYPE_FIBER_XAUI || type == FW_PORT_TYPE_SFP) {
v |= SUPPORTED_FIBRE;
- else if (type == FW_PORT_TYPE_BP40_BA)
+ if (caps & FW_PORT_CAP_SPEED_1G)
+ v |= SUPPORTED_1000baseT_Full;
+ if (caps & FW_PORT_CAP_SPEED_10G)
+ v |= SUPPORTED_10000baseT_Full;
+ } else if (type == FW_PORT_TYPE_BP40_BA)
v |= SUPPORTED_40000baseSR4_Full;
if (caps & FW_PORT_CAP_ANEG)
diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index 60e9c2c..b5db6b3 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -917,21 +917,13 @@
return ret;
}
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARCH_SHMOBILE)
static void sh_eth_set_receive_align(struct sk_buff *skb)
{
- int reserve;
+ uintptr_t reserve = (uintptr_t)skb->data & (SH_ETH_RX_ALIGN - 1);
- reserve = SH4_SKB_RX_ALIGN - ((u32)skb->data & (SH4_SKB_RX_ALIGN - 1));
if (reserve)
- skb_reserve(skb, reserve);
+ skb_reserve(skb, SH_ETH_RX_ALIGN - reserve);
}
-#else
-static void sh_eth_set_receive_align(struct sk_buff *skb)
-{
- skb_reserve(skb, SH2_SH3_SKB_RX_ALIGN);
-}
-#endif
/* CPU <-> EDMAC endian convert */
@@ -1119,6 +1111,7 @@
struct sh_eth_txdesc *txdesc = NULL;
int rx_ringsize = sizeof(*rxdesc) * mdp->num_rx_ring;
int tx_ringsize = sizeof(*txdesc) * mdp->num_tx_ring;
+ int skbuff_size = mdp->rx_buf_sz + SH_ETH_RX_ALIGN - 1;
mdp->cur_rx = 0;
mdp->cur_tx = 0;
@@ -1131,21 +1124,21 @@
for (i = 0; i < mdp->num_rx_ring; i++) {
/* skb */
mdp->rx_skbuff[i] = NULL;
- skb = netdev_alloc_skb(ndev, mdp->rx_buf_sz);
+ skb = netdev_alloc_skb(ndev, skbuff_size);
mdp->rx_skbuff[i] = skb;
if (skb == NULL)
break;
- dma_map_single(&ndev->dev, skb->data, mdp->rx_buf_sz,
- DMA_FROM_DEVICE);
sh_eth_set_receive_align(skb);
/* RX descriptor */
rxdesc = &mdp->rx_ring[i];
+ /* The size of the buffer is a multiple of 16 bytes. */
+ rxdesc->buffer_length = ALIGN(mdp->rx_buf_sz, 16);
+ dma_map_single(&ndev->dev, skb->data, rxdesc->buffer_length,
+ DMA_FROM_DEVICE);
rxdesc->addr = virt_to_phys(PTR_ALIGN(skb->data, 4));
rxdesc->status = cpu_to_edmac(mdp, RD_RACT | RD_RFP);
- /* The size of the buffer is 16 byte boundary. */
- rxdesc->buffer_length = ALIGN(mdp->rx_buf_sz, 16);
/* Rx descriptor address set */
if (i == 0) {
sh_eth_write(ndev, mdp->rx_desc_dma, RDLAR);
@@ -1397,6 +1390,7 @@
struct sk_buff *skb;
u16 pkt_len = 0;
u32 desc_status;
+ int skbuff_size = mdp->rx_buf_sz + SH_ETH_RX_ALIGN - 1;
rxdesc = &mdp->rx_ring[entry];
while (!(rxdesc->status & cpu_to_edmac(mdp, RD_RACT))) {
@@ -1448,7 +1442,7 @@
if (mdp->cd->rpadir)
skb_reserve(skb, NET_IP_ALIGN);
dma_sync_single_for_cpu(&ndev->dev, rxdesc->addr,
- mdp->rx_buf_sz,
+ ALIGN(mdp->rx_buf_sz, 16),
DMA_FROM_DEVICE);
skb_put(skb, pkt_len);
skb->protocol = eth_type_trans(skb, ndev);
@@ -1468,13 +1462,13 @@
rxdesc->buffer_length = ALIGN(mdp->rx_buf_sz, 16);
if (mdp->rx_skbuff[entry] == NULL) {
- skb = netdev_alloc_skb(ndev, mdp->rx_buf_sz);
+ skb = netdev_alloc_skb(ndev, skbuff_size);
mdp->rx_skbuff[entry] = skb;
if (skb == NULL)
break; /* Better luck next round. */
- dma_map_single(&ndev->dev, skb->data, mdp->rx_buf_sz,
- DMA_FROM_DEVICE);
sh_eth_set_receive_align(skb);
+ dma_map_single(&ndev->dev, skb->data,
+ rxdesc->buffer_length, DMA_FROM_DEVICE);
skb_checksum_none_assert(skb);
rxdesc->addr = virt_to_phys(PTR_ALIGN(skb->data, 4));
@@ -2042,6 +2036,8 @@
if (ret)
goto out_free_irq;
+ mdp->is_opened = 1;
+
return ret;
out_free_irq:
@@ -2131,6 +2127,36 @@
return NETDEV_TX_OK;
}
+static struct net_device_stats *sh_eth_get_stats(struct net_device *ndev)
+{
+ struct sh_eth_private *mdp = netdev_priv(ndev);
+
+ if (sh_eth_is_rz_fast_ether(mdp))
+ return &ndev->stats;
+
+ if (!mdp->is_opened)
+ return &ndev->stats;
+
+ ndev->stats.tx_dropped += sh_eth_read(ndev, TROCR);
+ sh_eth_write(ndev, 0, TROCR); /* (write clear) */
+ ndev->stats.collisions += sh_eth_read(ndev, CDCR);
+ sh_eth_write(ndev, 0, CDCR); /* (write clear) */
+ ndev->stats.tx_carrier_errors += sh_eth_read(ndev, LCCR);
+ sh_eth_write(ndev, 0, LCCR); /* (write clear) */
+
+ if (sh_eth_is_gether(mdp)) {
+ ndev->stats.tx_carrier_errors += sh_eth_read(ndev, CERCR);
+ sh_eth_write(ndev, 0, CERCR); /* (write clear) */
+ ndev->stats.tx_carrier_errors += sh_eth_read(ndev, CEECR);
+ sh_eth_write(ndev, 0, CEECR); /* (write clear) */
+ } else {
+ ndev->stats.tx_carrier_errors += sh_eth_read(ndev, CNDCR);
+ sh_eth_write(ndev, 0, CNDCR); /* (write clear) */
+ }
+
+ return &ndev->stats;
+}
+
/* device close function */
static int sh_eth_close(struct net_device *ndev)
{
@@ -2145,6 +2171,7 @@
sh_eth_write(ndev, 0, EDTRR);
sh_eth_write(ndev, 0, EDRRR);
+ sh_eth_get_stats(ndev);
/* PHY Disconnect */
if (mdp->phydev) {
phy_stop(mdp->phydev);
@@ -2163,38 +2190,11 @@
pm_runtime_put_sync(&mdp->pdev->dev);
+ mdp->is_opened = 0;
+
return 0;
}
-static struct net_device_stats *sh_eth_get_stats(struct net_device *ndev)
-{
- struct sh_eth_private *mdp = netdev_priv(ndev);
-
- if (sh_eth_is_rz_fast_ether(mdp))
- return &ndev->stats;
-
- pm_runtime_get_sync(&mdp->pdev->dev);
-
- ndev->stats.tx_dropped += sh_eth_read(ndev, TROCR);
- sh_eth_write(ndev, 0, TROCR); /* (write clear) */
- ndev->stats.collisions += sh_eth_read(ndev, CDCR);
- sh_eth_write(ndev, 0, CDCR); /* (write clear) */
- ndev->stats.tx_carrier_errors += sh_eth_read(ndev, LCCR);
- sh_eth_write(ndev, 0, LCCR); /* (write clear) */
- if (sh_eth_is_gether(mdp)) {
- ndev->stats.tx_carrier_errors += sh_eth_read(ndev, CERCR);
- sh_eth_write(ndev, 0, CERCR); /* (write clear) */
- ndev->stats.tx_carrier_errors += sh_eth_read(ndev, CEECR);
- sh_eth_write(ndev, 0, CEECR); /* (write clear) */
- } else {
- ndev->stats.tx_carrier_errors += sh_eth_read(ndev, CNDCR);
- sh_eth_write(ndev, 0, CNDCR); /* (write clear) */
- }
- pm_runtime_put_sync(&mdp->pdev->dev);
-
- return &ndev->stats;
-}
-
/* ioctl to device function */
static int sh_eth_do_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
{
diff --git a/drivers/net/ethernet/renesas/sh_eth.h b/drivers/net/ethernet/renesas/sh_eth.h
index b37c427..22301bf 100644
--- a/drivers/net/ethernet/renesas/sh_eth.h
+++ b/drivers/net/ethernet/renesas/sh_eth.h
@@ -162,9 +162,9 @@
/* Driver's parameters */
#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARCH_SHMOBILE)
-#define SH4_SKB_RX_ALIGN 32
+#define SH_ETH_RX_ALIGN 32
#else
-#define SH2_SH3_SKB_RX_ALIGN 2
+#define SH_ETH_RX_ALIGN 2
#endif
/* Register's bits
@@ -522,6 +522,7 @@
unsigned no_ether_link:1;
unsigned ether_link_active_low:1;
+ unsigned is_opened:1;
};
static inline void sh_eth_soft_swap(char *src, int len)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 5b0da39..58a1a0a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -265,6 +265,15 @@
plat_dat = dev_get_platdata(&pdev->dev);
+ if (!plat_dat)
+ plat_dat = devm_kzalloc(&pdev->dev,
+ sizeof(struct plat_stmmacenet_data),
+ GFP_KERNEL);
+ if (!plat_dat) {
+ pr_err("%s: ERROR: no memory", __func__);
+ return -ENOMEM;
+ }
+
/* Set default value for multicast hash bins */
plat_dat->multicast_filter_bins = HASH_TABLE_SIZE;
@@ -272,15 +281,6 @@
plat_dat->unicast_filter_entries = 1;
if (pdev->dev.of_node) {
- if (!plat_dat)
- plat_dat = devm_kzalloc(&pdev->dev,
- sizeof(struct plat_stmmacenet_data),
- GFP_KERNEL);
- if (!plat_dat) {
- pr_err("%s: ERROR: no memory", __func__);
- return -ENOMEM;
- }
-
ret = stmmac_probe_config_dt(pdev, plat_dat, &mac);
if (ret) {
pr_err("%s: main dt probe failed", __func__);
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index cca8713..ece8d18 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -496,9 +496,6 @@
len = skb_frag_size(frag);
offset = frag->page_offset;
- /* Data must not cross a page boundary. */
- BUG_ON(len + offset > PAGE_SIZE<<compound_order(page));
-
/* Skip unused frames from start of page */
page += offset >> PAGE_SHIFT;
offset &= ~PAGE_MASK;
@@ -506,8 +503,6 @@
while (len > 0) {
unsigned long bytes;
- BUG_ON(offset >= PAGE_SIZE);
-
bytes = PAGE_SIZE - offset;
if (bytes > len)
bytes = len;
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 30e97bc..d134710 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -964,8 +964,6 @@
int __init __weak early_init_dt_reserve_memory_arch(phys_addr_t base,
phys_addr_t size, bool nomap)
{
- if (memblock_is_region_reserved(base, size))
- return -EBUSY;
if (nomap)
return memblock_remove(base, size);
return memblock_reserve(base, size);
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 3d43874..19bb19c 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -276,6 +276,7 @@
struct resource all;
struct resource io;
+ struct resource pio;
struct resource mem;
struct resource prefetch;
struct resource busn;
@@ -658,7 +659,6 @@
{
struct tegra_pcie *pcie = sys_to_pcie(sys);
int err;
- phys_addr_t io_start;
err = devm_request_resource(pcie->dev, &pcie->all, &pcie->mem);
if (err < 0)
@@ -668,14 +668,12 @@
if (err)
return err;
- io_start = pci_pio_to_address(pcie->io.start);
-
pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset);
pci_add_resource_offset(&sys->resources, &pcie->prefetch,
sys->mem_offset);
pci_add_resource(&sys->resources, &pcie->busn);
- pci_ioremap_io(nr * SZ_64K, io_start);
+ pci_ioremap_io(pcie->pio.start, pcie->io.start);
return 1;
}
@@ -786,7 +784,6 @@
static void tegra_pcie_setup_translations(struct tegra_pcie *pcie)
{
u32 fpci_bar, size, axi_address;
- phys_addr_t io_start = pci_pio_to_address(pcie->io.start);
/* Bar 0: type 1 extended configuration space */
fpci_bar = 0xfe100000;
@@ -799,7 +796,7 @@
/* Bar 1: downstream IO bar */
fpci_bar = 0xfdfc0000;
size = resource_size(&pcie->io);
- axi_address = io_start;
+ axi_address = pcie->io.start;
afi_writel(pcie, axi_address, AFI_AXI_BAR1_START);
afi_writel(pcie, size >> 12, AFI_AXI_BAR1_SZ);
afi_writel(pcie, fpci_bar, AFI_FPCI_BAR1);
@@ -1690,8 +1687,23 @@
switch (res.flags & IORESOURCE_TYPE_BITS) {
case IORESOURCE_IO:
- memcpy(&pcie->io, &res, sizeof(res));
- pcie->io.name = np->full_name;
+ memcpy(&pcie->pio, &res, sizeof(res));
+ pcie->pio.name = np->full_name;
+
+ /*
+ * The Tegra PCIe host bridge uses this to program the
+ * mapping of the I/O space to the physical address,
+ * so we override the .start and .end fields here that
+ * of_pci_range_to_resource() converted to I/O space.
+ * We also set the IORESOURCE_MEM type to clarify that
+ * the resource is in the physical memory space.
+ */
+ pcie->io.start = range.cpu_addr;
+ pcie->io.end = range.cpu_addr + range.size - 1;
+ pcie->io.flags = IORESOURCE_MEM;
+ pcie->io.name = "I/O";
+
+ memcpy(&res, &pcie->io, sizeof(res));
break;
case IORESOURCE_MEM:
diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c
index 6d77dcd..3fe47bd 100644
--- a/drivers/regulator/88pm8607.c
+++ b/drivers/regulator/88pm8607.c
@@ -330,7 +330,8 @@
for_each_child_of_node(nproot, np) {
if (!of_node_cmp(np->name, info->desc.name)) {
config->init_data =
- of_get_regulator_init_data(&pdev->dev, np);
+ of_get_regulator_init_data(&pdev->dev, np,
+ &info->desc);
config->of_node = np;
break;
}
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 55d7b7b..c3a60b5 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -521,6 +521,14 @@
help
Say y here to support the regulators found on Ricoh RN5T618 PMIC.
+config REGULATOR_RT5033
+ tristate "Richtek RT5033 Regulators"
+ depends on MFD_RT5033
+ help
+ This adds support for voltage and current regulators in Richtek
+ RT5033 PMIC. The device supports multiple regulators like
+ current source, LDO and Buck.
+
config REGULATOR_S2MPA01
tristate "Samsung S2MPA01 voltage regulator"
depends on MFD_SEC_CORE
@@ -529,13 +537,13 @@
via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
config REGULATOR_S2MPS11
- tristate "Samsung S2MPS11/S2MPS14/S2MPU02 voltage regulator"
+ tristate "Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage regulator"
depends on MFD_SEC_CORE
help
- This driver supports a Samsung S2MPS11/S2MPS14/S2MPU02 voltage output
- regulator via I2C bus. The chip is comprised of high efficient Buck
- converters including Dual-Phase Buck converter, Buck-Boost converter,
- various LDOs.
+ This driver supports a Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage
+ output regulator via I2C bus. The chip is comprised of high efficient
+ Buck converters including Dual-Phase Buck converter, Buck-Boost
+ converter, various LDOs.
config REGULATOR_S5M8767
tristate "Samsung S5M8767A voltage regulator"
@@ -547,7 +555,7 @@
config REGULATOR_SKY81452
tristate "Skyworks Solutions SKY81452 voltage regulator"
- depends on SKY81452
+ depends on MFD_SKY81452
help
This driver supports Skyworks SKY81452 voltage output regulator
via I2C bus. SKY81452 has one voltage linear regulator can be
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 1029ed3..1f28ebf 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -69,6 +69,7 @@
obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o
obj-$(CONFIG_REGULATOR_RK808) += rk808-regulator.o
obj-$(CONFIG_REGULATOR_RN5T618) += rn5t618-regulator.o
+obj-$(CONFIG_REGULATOR_RT5033) += rt5033-regulator.o
obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
index afd06f9..9eec453 100644
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -61,6 +61,8 @@
#define ACT8846_REG12_VSET 0xa0
#define ACT8846_REG12_CTRL 0xa1
#define ACT8846_REG13_CTRL 0xb1
+#define ACT8846_GLB_OFF_CTRL 0xc3
+#define ACT8846_OFF_SYSMASK 0x18
/*
* ACT8865 Global Register Map.
@@ -84,6 +86,7 @@
#define ACT8865_LDO3_CTRL 0x61
#define ACT8865_LDO4_VSET 0x64
#define ACT8865_LDO4_CTRL 0x65
+#define ACT8865_MSTROFF 0x20
/*
* Field Definitions.
@@ -98,6 +101,8 @@
struct act8865 {
struct regmap *regmap;
+ int off_reg;
+ int off_mask;
};
static const struct regmap_config act8865_regmap_config = {
@@ -275,6 +280,16 @@
return NULL;
}
+static struct i2c_client *act8865_i2c_client;
+static void act8865_power_off(void)
+{
+ struct act8865 *act8865;
+
+ act8865 = i2c_get_clientdata(act8865_i2c_client);
+ regmap_write(act8865->regmap, act8865->off_reg, act8865->off_mask);
+ while (1);
+}
+
static int act8865_pmic_probe(struct i2c_client *client,
const struct i2c_device_id *i2c_id)
{
@@ -285,6 +300,7 @@
int i, ret, num_regulators;
struct act8865 *act8865;
unsigned long type;
+ int off_reg, off_mask;
pdata = dev_get_platdata(dev);
@@ -304,10 +320,14 @@
case ACT8846:
regulators = act8846_regulators;
num_regulators = ARRAY_SIZE(act8846_regulators);
+ off_reg = ACT8846_GLB_OFF_CTRL;
+ off_mask = ACT8846_OFF_SYSMASK;
break;
case ACT8865:
regulators = act8865_regulators;
num_regulators = ARRAY_SIZE(act8865_regulators);
+ off_reg = ACT8865_SYS_CTRL;
+ off_mask = ACT8865_MSTROFF;
break;
default:
dev_err(dev, "invalid device id %lu\n", type);
@@ -345,6 +365,17 @@
return ret;
}
+ if (of_device_is_system_power_controller(dev->of_node)) {
+ if (!pm_power_off) {
+ act8865_i2c_client = client;
+ act8865->off_reg = off_reg;
+ act8865->off_mask = off_mask;
+ pm_power_off = act8865_power_off;
+ } else {
+ dev_err(dev, "Failed to set poweroff capability, already defined\n");
+ }
+ }
+
/* Finally register devices */
for (i = 0; i < num_regulators; i++) {
const struct regulator_desc *desc = ®ulators[i];
diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
index 4f730af..3586571 100644
--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@ -189,17 +189,18 @@
int ret = 0;
u32 val;
- initdata = of_get_regulator_init_data(dev, np);
sreg = devm_kzalloc(dev, sizeof(*sreg), GFP_KERNEL);
if (!sreg)
return -ENOMEM;
- sreg->initdata = initdata;
sreg->name = of_get_property(np, "regulator-name", NULL);
rdesc = &sreg->rdesc;
rdesc->name = sreg->name;
rdesc->type = REGULATOR_VOLTAGE;
rdesc->owner = THIS_MODULE;
+ initdata = of_get_regulator_init_data(dev, np, rdesc);
+ sreg->initdata = initdata;
+
anatop_np = of_get_parent(np);
if (!anatop_np)
return -ENODEV;
@@ -283,6 +284,19 @@
sreg->sel = 0;
sreg->bypass = true;
}
+
+ /*
+ * In case vddpu was disabled by the bootloader, we need to set
+ * a sane default until imx6-cpufreq was probed and changes the
+ * voltage to the correct value. In this case we set 1.25V.
+ */
+ if (!sreg->sel && !strcmp(sreg->name, "vddpu"))
+ sreg->sel = 22;
+
+ if (!sreg->sel) {
+ dev_err(&pdev->dev, "Failed to read a valid default voltage selector.\n");
+ return -EINVAL;
+ }
} else {
rdesc->ops = &anatop_rops;
}
diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index 4c9db58..d071b21 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -179,7 +179,8 @@
};
static int arizona_ldo1_of_get_pdata(struct arizona *arizona,
- struct regulator_config *config)
+ struct regulator_config *config,
+ const struct regulator_desc *desc)
{
struct arizona_pdata *pdata = &arizona->pdata;
struct arizona_ldo1 *ldo1 = config->driver_data;
@@ -194,7 +195,8 @@
if (init_node) {
config->of_node = init_node;
- init_data = of_get_regulator_init_data(arizona->dev, init_node);
+ init_data = of_get_regulator_init_data(arizona->dev, init_node,
+ desc);
if (init_data) {
init_data->consumer_supplies = &ldo1->supply;
@@ -257,9 +259,11 @@
if (IS_ENABLED(CONFIG_OF)) {
if (!dev_get_platdata(arizona->dev)) {
- ret = arizona_ldo1_of_get_pdata(arizona, &config);
+ ret = arizona_ldo1_of_get_pdata(arizona, &config, desc);
if (ret < 0)
return ret;
+
+ config.ena_gpio_initialized = true;
}
}
diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c
index ce9aca5..c313ef4 100644
--- a/drivers/regulator/arizona-micsupp.c
+++ b/drivers/regulator/arizona-micsupp.c
@@ -198,7 +198,8 @@
};
static int arizona_micsupp_of_get_pdata(struct arizona *arizona,
- struct regulator_config *config)
+ struct regulator_config *config,
+ const struct regulator_desc *desc)
{
struct arizona_pdata *pdata = &arizona->pdata;
struct arizona_micsupp *micsupp = config->driver_data;
@@ -210,7 +211,7 @@
if (np) {
config->of_node = np;
- init_data = of_get_regulator_init_data(arizona->dev, np);
+ init_data = of_get_regulator_init_data(arizona->dev, np, desc);
if (init_data) {
init_data->consumer_supplies = &micsupp->supply;
@@ -264,7 +265,8 @@
if (IS_ENABLED(CONFIG_OF)) {
if (!dev_get_platdata(arizona->dev)) {
- ret = arizona_micsupp_of_get_pdata(arizona, &config);
+ ret = arizona_micsupp_of_get_pdata(arizona, &config,
+ desc);
if (ret < 0)
return ret;
}
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index cd87c0c..e225711 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -828,7 +828,7 @@
if (!count)
sprintf(buf, "no parameters");
- rdev_info(rdev, "%s\n", buf);
+ rdev_dbg(rdev, "%s\n", buf);
if ((constraints->min_uV != constraints->max_uV) &&
!(constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE))
@@ -1713,6 +1713,8 @@
gpiod_put(pin->gpiod);
list_del(&pin->list);
kfree(pin);
+ rdev->ena_pin = NULL;
+ return;
} else {
pin->request_count--;
}
@@ -1976,9 +1978,18 @@
/* we are last user */
if (_regulator_can_change_status(rdev)) {
+ ret = _notifier_call_chain(rdev,
+ REGULATOR_EVENT_PRE_DISABLE,
+ NULL);
+ if (ret & NOTIFY_STOP_MASK)
+ return -EINVAL;
+
ret = _regulator_do_disable(rdev);
if (ret < 0) {
rdev_err(rdev, "failed to disable\n");
+ _notifier_call_chain(rdev,
+ REGULATOR_EVENT_ABORT_DISABLE,
+ NULL);
return ret;
}
_notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE,
@@ -2035,9 +2046,16 @@
{
int ret = 0;
+ ret = _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE |
+ REGULATOR_EVENT_PRE_DISABLE, NULL);
+ if (ret & NOTIFY_STOP_MASK)
+ return -EINVAL;
+
ret = _regulator_do_disable(rdev);
if (ret < 0) {
rdev_err(rdev, "failed to force disable\n");
+ _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE |
+ REGULATOR_EVENT_ABORT_DISABLE, NULL);
return ret;
}
@@ -3650,7 +3668,8 @@
dev_set_drvdata(&rdev->dev, rdev);
- if (config->ena_gpio && gpio_is_valid(config->ena_gpio)) {
+ if ((config->ena_gpio || config->ena_gpio_initialized) &&
+ gpio_is_valid(config->ena_gpio)) {
ret = regulator_ena_gpio_request(rdev, config);
if (ret != 0) {
rdev_err(rdev, "Failed to request enable GPIO%d: %d\n",
diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c
index 0003362..3945f10 100644
--- a/drivers/regulator/da9052-regulator.c
+++ b/drivers/regulator/da9052-regulator.c
@@ -436,7 +436,8 @@
if (!of_node_cmp(np->name,
regulator->info->reg_desc.name)) {
config.init_data = of_get_regulator_init_data(
- &pdev->dev, np);
+ &pdev->dev, np,
+ ®ulator->info->reg_desc);
config.of_node = np;
break;
}
diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-regulator.c
index 7c9461d..37dd427 100644
--- a/drivers/regulator/da9063-regulator.c
+++ b/drivers/regulator/da9063-regulator.c
@@ -867,17 +867,14 @@
return irq;
}
- regulators->irq_ldo_lim = regmap_irq_get_virq(da9063->regmap_irq, irq);
- if (regulators->irq_ldo_lim >= 0) {
- ret = request_threaded_irq(regulators->irq_ldo_lim,
- NULL, da9063_ldo_lim_event,
- IRQF_TRIGGER_LOW | IRQF_ONESHOT,
- "LDO_LIM", regulators);
- if (ret) {
- dev_err(&pdev->dev,
- "Failed to request LDO_LIM IRQ.\n");
- regulators->irq_ldo_lim = -ENXIO;
- }
+ ret = request_threaded_irq(irq,
+ NULL, da9063_ldo_lim_event,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ "LDO_LIM", regulators);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to request LDO_LIM IRQ.\n");
+ regulators->irq_ldo_lim = -ENXIO;
}
return 0;
diff --git a/drivers/regulator/da9210-regulator.c b/drivers/regulator/da9210-regulator.c
index 7a320dd..bc61001 100644
--- a/drivers/regulator/da9210-regulator.c
+++ b/drivers/regulator/da9210-regulator.c
@@ -147,7 +147,7 @@
config.dev = &i2c->dev;
config.init_data = pdata ? &pdata->da9210_constraints :
- of_get_regulator_init_data(dev, dev->of_node);
+ of_get_regulator_init_data(dev, dev->of_node, &da9210_reg);
config.driver_data = chip;
config.regmap = chip->regmap;
config.of_node = dev->of_node;
diff --git a/drivers/regulator/dummy.c b/drivers/regulator/dummy.c
index 2436db9..7aef9e4 100644
--- a/drivers/regulator/dummy.c
+++ b/drivers/regulator/dummy.c
@@ -33,7 +33,7 @@
static struct regulator_ops dummy_ops;
-static struct regulator_desc dummy_desc = {
+static const struct regulator_desc dummy_desc = {
.name = "regulator-dummy",
.id = -1,
.type = REGULATOR_VOLTAGE,
diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index f8e4257..6c43ab2 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -302,7 +302,8 @@
};
static struct fan53555_platform_data *fan53555_parse_dt(struct device *dev,
- struct device_node *np)
+ struct device_node *np,
+ const struct regulator_desc *desc)
{
struct fan53555_platform_data *pdata;
int ret;
@@ -312,7 +313,7 @@
if (!pdata)
return NULL;
- pdata->regulator = of_get_regulator_init_data(dev, np);
+ pdata->regulator = of_get_regulator_init_data(dev, np, desc);
ret = of_property_read_u32(np, "fcs,suspend-voltage-selector",
&tmp);
@@ -347,20 +348,20 @@
unsigned int val;
int ret;
+ di = devm_kzalloc(&client->dev, sizeof(struct fan53555_device_info),
+ GFP_KERNEL);
+ if (!di)
+ return -ENOMEM;
+
pdata = dev_get_platdata(&client->dev);
if (!pdata)
- pdata = fan53555_parse_dt(&client->dev, np);
+ pdata = fan53555_parse_dt(&client->dev, np, &di->desc);
if (!pdata || !pdata->regulator) {
dev_err(&client->dev, "Platform data not found!\n");
return -ENODEV;
}
- di = devm_kzalloc(&client->dev, sizeof(struct fan53555_device_info),
- GFP_KERNEL);
- if (!di)
- return -ENOMEM;
-
di->regulator = pdata->regulator;
if (client->dev.of_node) {
const struct of_device_id *match;
diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index 354105e..d21da27 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -40,13 +40,15 @@
/**
* of_get_fixed_voltage_config - extract fixed_voltage_config structure info
* @dev: device requesting for fixed_voltage_config
+ * @desc: regulator description
*
* Populates fixed_voltage_config structure by extracting data from device
* tree node, returns a pointer to the populated structure of NULL if memory
* alloc fails.
*/
static struct fixed_voltage_config *
-of_get_fixed_voltage_config(struct device *dev)
+of_get_fixed_voltage_config(struct device *dev,
+ const struct regulator_desc *desc)
{
struct fixed_voltage_config *config;
struct device_node *np = dev->of_node;
@@ -57,7 +59,7 @@
if (!config)
return ERR_PTR(-ENOMEM);
- config->init_data = of_get_regulator_init_data(dev, dev->of_node);
+ config->init_data = of_get_regulator_init_data(dev, dev->of_node, desc);
if (!config->init_data)
return ERR_PTR(-EINVAL);
@@ -112,8 +114,14 @@
struct regulator_config cfg = { };
int ret;
+ drvdata = devm_kzalloc(&pdev->dev, sizeof(struct fixed_voltage_data),
+ GFP_KERNEL);
+ if (!drvdata)
+ return -ENOMEM;
+
if (pdev->dev.of_node) {
- config = of_get_fixed_voltage_config(&pdev->dev);
+ config = of_get_fixed_voltage_config(&pdev->dev,
+ &drvdata->desc);
if (IS_ERR(config))
return PTR_ERR(config);
} else {
@@ -123,11 +131,6 @@
if (!config)
return -ENOMEM;
- drvdata = devm_kzalloc(&pdev->dev, sizeof(struct fixed_voltage_data),
- GFP_KERNEL);
- if (!drvdata)
- return -ENOMEM;
-
drvdata->desc.name = devm_kstrdup(&pdev->dev,
config->supply_name,
GFP_KERNEL);
@@ -157,8 +160,11 @@
drvdata->desc.fixed_uV = config->microvolts;
- if (config->gpio >= 0)
+ if (gpio_is_valid(config->gpio)) {
cfg.ena_gpio = config->gpio;
+ if (pdev->dev.of_node)
+ cfg.ena_gpio_initialized = true;
+ }
cfg.ena_gpio_invert = !config->enable_high;
if (config->enabled_at_boot) {
if (config->enable_high)
diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c
index 989b23b..c888a9a 100644
--- a/drivers/regulator/gpio-regulator.c
+++ b/drivers/regulator/gpio-regulator.c
@@ -133,7 +133,8 @@
};
static struct gpio_regulator_config *
-of_get_gpio_regulator_config(struct device *dev, struct device_node *np)
+of_get_gpio_regulator_config(struct device *dev, struct device_node *np,
+ const struct regulator_desc *desc)
{
struct gpio_regulator_config *config;
const char *regtype;
@@ -146,7 +147,7 @@
if (!config)
return ERR_PTR(-ENOMEM);
- config->init_data = of_get_regulator_init_data(dev, np);
+ config->init_data = of_get_regulator_init_data(dev, np, desc);
if (!config->init_data)
return ERR_PTR(-EINVAL);
@@ -162,34 +163,41 @@
config->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0);
- /* Fetch GPIOs. */
- config->nr_gpios = of_gpio_count(np);
+ /* Fetch GPIOs. - optional property*/
+ ret = of_gpio_count(np);
+ if ((ret < 0) && (ret != -ENOENT))
+ return ERR_PTR(ret);
- config->gpios = devm_kzalloc(dev,
- sizeof(struct gpio) * config->nr_gpios,
- GFP_KERNEL);
- if (!config->gpios)
- return ERR_PTR(-ENOMEM);
+ if (ret > 0) {
+ config->nr_gpios = ret;
+ config->gpios = devm_kzalloc(dev,
+ sizeof(struct gpio) * config->nr_gpios,
+ GFP_KERNEL);
+ if (!config->gpios)
+ return ERR_PTR(-ENOMEM);
- proplen = of_property_count_u32_elems(np, "gpios-states");
- /* optional property */
- if (proplen < 0)
- proplen = 0;
+ proplen = of_property_count_u32_elems(np, "gpios-states");
+ /* optional property */
+ if (proplen < 0)
+ proplen = 0;
- if (proplen > 0 && proplen != config->nr_gpios) {
- dev_warn(dev, "gpios <-> gpios-states mismatch\n");
- proplen = 0;
- }
+ if (proplen > 0 && proplen != config->nr_gpios) {
+ dev_warn(dev, "gpios <-> gpios-states mismatch\n");
+ proplen = 0;
+ }
- for (i = 0; i < config->nr_gpios; i++) {
- gpio = of_get_named_gpio(np, "gpios", i);
- if (gpio < 0)
- break;
- config->gpios[i].gpio = gpio;
- if (proplen > 0) {
- of_property_read_u32_index(np, "gpios-states", i, &ret);
- if (ret)
- config->gpios[i].flags = GPIOF_OUT_INIT_HIGH;
+ for (i = 0; i < config->nr_gpios; i++) {
+ gpio = of_get_named_gpio(np, "gpios", i);
+ if (gpio < 0)
+ break;
+ config->gpios[i].gpio = gpio;
+ if (proplen > 0) {
+ of_property_read_u32_index(np, "gpios-states",
+ i, &ret);
+ if (ret)
+ config->gpios[i].flags =
+ GPIOF_OUT_INIT_HIGH;
+ }
}
}
@@ -243,17 +251,18 @@
struct regulator_config cfg = { };
int ptr, ret, state;
- if (np) {
- config = of_get_gpio_regulator_config(&pdev->dev, np);
- if (IS_ERR(config))
- return PTR_ERR(config);
- }
-
drvdata = devm_kzalloc(&pdev->dev, sizeof(struct gpio_regulator_data),
GFP_KERNEL);
if (drvdata == NULL)
return -ENOMEM;
+ if (np) {
+ config = of_get_gpio_regulator_config(&pdev->dev, np,
+ &drvdata->desc);
+ if (IS_ERR(config))
+ return PTR_ERR(config);
+ }
+
drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL);
if (drvdata->desc.name == NULL) {
dev_err(&pdev->dev, "Failed to allocate supply name\n");
@@ -261,13 +270,23 @@
goto err;
}
- drvdata->gpios = kmemdup(config->gpios,
- config->nr_gpios * sizeof(struct gpio),
- GFP_KERNEL);
- if (drvdata->gpios == NULL) {
- dev_err(&pdev->dev, "Failed to allocate gpio data\n");
- ret = -ENOMEM;
- goto err_name;
+ if (config->nr_gpios != 0) {
+ drvdata->gpios = kmemdup(config->gpios,
+ config->nr_gpios * sizeof(struct gpio),
+ GFP_KERNEL);
+ if (drvdata->gpios == NULL) {
+ dev_err(&pdev->dev, "Failed to allocate gpio data\n");
+ ret = -ENOMEM;
+ goto err_name;
+ }
+
+ drvdata->nr_gpios = config->nr_gpios;
+ ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Could not obtain regulator setting GPIOs: %d\n", ret);
+ goto err_memstate;
+ }
}
drvdata->states = kmemdup(config->states,
@@ -301,14 +320,6 @@
goto err_memgpio;
}
- drvdata->nr_gpios = config->nr_gpios;
- ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios);
- if (ret) {
- dev_err(&pdev->dev,
- "Could not obtain regulator setting GPIOs: %d\n", ret);
- goto err_memstate;
- }
-
/* build initial state from gpio init data. */
state = 0;
for (ptr = 0; ptr < drvdata->nr_gpios; ptr++) {
@@ -322,8 +333,10 @@
cfg.driver_data = drvdata;
cfg.of_node = np;
- if (config->enable_gpio >= 0)
+ if (gpio_is_valid(config->enable_gpio)) {
cfg.ena_gpio = config->enable_gpio;
+ cfg.ena_gpio_initialized = true;
+ }
cfg.ena_gpio_invert = !config->enable_high;
if (config->enabled_at_boot) {
if (config->enable_high)
diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c
index f69320e..871b96b 100644
--- a/drivers/regulator/max77686.c
+++ b/drivers/regulator/max77686.c
@@ -45,6 +45,23 @@
#define MAX77686_DVS_MINUV 600000
#define MAX77686_DVS_UVSTEP 12500
+/*
+ * Values used for configuring LDOs and bucks.
+ * Forcing low power mode: LDO1, 3-5, 9, 13, 17-26
+ */
+#define MAX77686_LDO_LOWPOWER 0x1
+/*
+ * On/off controlled by PWRREQ:
+ * - LDO2, 6-8, 10-12, 14-16
+ * - buck[1234]
+ */
+#define MAX77686_OFF_PWRREQ 0x1
+/* Low power mode controlled by PWRREQ: All LDOs */
+#define MAX77686_LDO_LOWPOWER_PWRREQ 0x2
+/* Forcing low power mode: buck[234] */
+#define MAX77686_BUCK_LOWPOWER 0x2
+#define MAX77686_NORMAL 0x3
+
#define MAX77686_OPMODE_SHIFT 6
#define MAX77686_OPMODE_BUCK234_SHIFT 4
#define MAX77686_OPMODE_MASK 0x3
@@ -65,23 +82,36 @@
};
struct max77686_data {
+ /* Array indexed by regulator id */
unsigned int opmode[MAX77686_REGULATORS];
};
-/* Some BUCKS supports Normal[ON/OFF] mode during suspend */
-static int max77686_buck_set_suspend_disable(struct regulator_dev *rdev)
+static unsigned int max77686_get_opmode_shift(int id)
{
- unsigned int val;
+ switch (id) {
+ case MAX77686_BUCK1:
+ case MAX77686_BUCK5 ... MAX77686_BUCK9:
+ return 0;
+ case MAX77686_BUCK2 ... MAX77686_BUCK4:
+ return MAX77686_OPMODE_BUCK234_SHIFT;
+ default:
+ /* all LDOs */
+ return MAX77686_OPMODE_SHIFT;
+ }
+}
+
+/* Some BUCKs and LDOs supports Normal[ON/OFF] mode during suspend */
+static int max77686_set_suspend_disable(struct regulator_dev *rdev)
+{
+ unsigned int val, shift;
struct max77686_data *max77686 = rdev_get_drvdata(rdev);
int ret, id = rdev_get_id(rdev);
- if (id == MAX77686_BUCK1)
- val = 0x1;
- else
- val = 0x1 << MAX77686_OPMODE_BUCK234_SHIFT;
+ shift = max77686_get_opmode_shift(id);
+ val = MAX77686_OFF_PWRREQ;
ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
- rdev->desc->enable_mask, val);
+ rdev->desc->enable_mask, val << shift);
if (ret)
return ret;
@@ -103,10 +133,10 @@
switch (mode) {
case REGULATOR_MODE_IDLE: /* ON in LP Mode */
- val = 0x2 << MAX77686_OPMODE_SHIFT;
+ val = MAX77686_LDO_LOWPOWER_PWRREQ;
break;
case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
- val = 0x3 << MAX77686_OPMODE_SHIFT;
+ val = MAX77686_NORMAL;
break;
default:
pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",
@@ -115,7 +145,8 @@
}
ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
- rdev->desc->enable_mask, val);
+ rdev->desc->enable_mask,
+ val << MAX77686_OPMODE_SHIFT);
if (ret)
return ret;
@@ -133,13 +164,13 @@
switch (mode) {
case REGULATOR_MODE_STANDBY: /* switch off */
- val = 0x1 << MAX77686_OPMODE_SHIFT;
+ val = MAX77686_OFF_PWRREQ;
break;
case REGULATOR_MODE_IDLE: /* ON in LP Mode */
- val = 0x2 << MAX77686_OPMODE_SHIFT;
+ val = MAX77686_LDO_LOWPOWER_PWRREQ;
break;
case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
- val = 0x3 << MAX77686_OPMODE_SHIFT;
+ val = MAX77686_NORMAL;
break;
default:
pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",
@@ -148,7 +179,8 @@
}
ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
- rdev->desc->enable_mask, val);
+ rdev->desc->enable_mask,
+ val << MAX77686_OPMODE_SHIFT);
if (ret)
return ret;
@@ -159,10 +191,17 @@
static int max77686_enable(struct regulator_dev *rdev)
{
struct max77686_data *max77686 = rdev_get_drvdata(rdev);
+ unsigned int shift;
+ int id = rdev_get_id(rdev);
+
+ shift = max77686_get_opmode_shift(id);
+
+ if (max77686->opmode[id] == MAX77686_OFF_PWRREQ)
+ max77686->opmode[id] = MAX77686_NORMAL;
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask,
- max77686->opmode[rdev_get_id(rdev)]);
+ max77686->opmode[id] << shift);
}
static int max77686_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
@@ -212,6 +251,7 @@
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_suspend_mode = max77686_ldo_set_suspend_mode,
+ .set_suspend_disable = max77686_set_suspend_disable,
};
static struct regulator_ops max77686_buck1_ops = {
@@ -223,7 +263,7 @@
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
- .set_suspend_disable = max77686_buck_set_suspend_disable,
+ .set_suspend_disable = max77686_set_suspend_disable,
};
static struct regulator_ops max77686_buck_dvs_ops = {
@@ -236,11 +276,13 @@
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = max77686_set_ramp_delay,
- .set_suspend_disable = max77686_buck_set_suspend_disable,
+ .set_suspend_disable = max77686_set_suspend_disable,
};
#define regulator_desc_ldo(num) { \
.name = "LDO"#num, \
+ .of_match = of_match_ptr("LDO"#num), \
+ .regulators_node = of_match_ptr("voltage-regulators"), \
.id = MAX77686_LDO##num, \
.ops = &max77686_ops, \
.type = REGULATOR_VOLTAGE, \
@@ -257,6 +299,8 @@
}
#define regulator_desc_lpm_ldo(num) { \
.name = "LDO"#num, \
+ .of_match = of_match_ptr("LDO"#num), \
+ .regulators_node = of_match_ptr("voltage-regulators"), \
.id = MAX77686_LDO##num, \
.ops = &max77686_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
@@ -273,6 +317,8 @@
}
#define regulator_desc_ldo_low(num) { \
.name = "LDO"#num, \
+ .of_match = of_match_ptr("LDO"#num), \
+ .regulators_node = of_match_ptr("voltage-regulators"), \
.id = MAX77686_LDO##num, \
.ops = &max77686_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
@@ -289,6 +335,8 @@
}
#define regulator_desc_ldo1_low(num) { \
.name = "LDO"#num, \
+ .of_match = of_match_ptr("LDO"#num), \
+ .regulators_node = of_match_ptr("voltage-regulators"), \
.id = MAX77686_LDO##num, \
.ops = &max77686_ops, \
.type = REGULATOR_VOLTAGE, \
@@ -305,6 +353,8 @@
}
#define regulator_desc_buck(num) { \
.name = "BUCK"#num, \
+ .of_match = of_match_ptr("BUCK"#num), \
+ .regulators_node = of_match_ptr("voltage-regulators"), \
.id = MAX77686_BUCK##num, \
.ops = &max77686_ops, \
.type = REGULATOR_VOLTAGE, \
@@ -320,6 +370,8 @@
}
#define regulator_desc_buck1(num) { \
.name = "BUCK"#num, \
+ .of_match = of_match_ptr("BUCK"#num), \
+ .regulators_node = of_match_ptr("voltage-regulators"), \
.id = MAX77686_BUCK##num, \
.ops = &max77686_buck1_ops, \
.type = REGULATOR_VOLTAGE, \
@@ -335,6 +387,8 @@
}
#define regulator_desc_buck_dvs(num) { \
.name = "BUCK"#num, \
+ .of_match = of_match_ptr("BUCK"#num), \
+ .regulators_node = of_match_ptr("voltage-regulators"), \
.id = MAX77686_BUCK##num, \
.ops = &max77686_buck_dvs_ops, \
.type = REGULATOR_VOLTAGE, \
@@ -350,7 +404,7 @@
<< MAX77686_OPMODE_BUCK234_SHIFT, \
}
-static struct regulator_desc regulators[] = {
+static const struct regulator_desc regulators[] = {
regulator_desc_ldo1_low(1),
regulator_desc_ldo_low(2),
regulator_desc_ldo(3),
@@ -388,103 +442,37 @@
regulator_desc_buck(9),
};
-#ifdef CONFIG_OF
-static int max77686_pmic_dt_parse_pdata(struct platform_device *pdev,
- struct max77686_platform_data *pdata)
-{
- struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
- struct device_node *pmic_np, *regulators_np;
- struct max77686_regulator_data *rdata;
- struct of_regulator_match rmatch = { };
- unsigned int i;
-
- pmic_np = iodev->dev->of_node;
- regulators_np = of_get_child_by_name(pmic_np, "voltage-regulators");
- if (!regulators_np) {
- dev_err(&pdev->dev, "could not find regulators sub-node\n");
- return -EINVAL;
- }
-
- pdata->num_regulators = ARRAY_SIZE(regulators);
- rdata = devm_kzalloc(&pdev->dev, sizeof(*rdata) *
- pdata->num_regulators, GFP_KERNEL);
- if (!rdata) {
- of_node_put(regulators_np);
- return -ENOMEM;
- }
-
- for (i = 0; i < pdata->num_regulators; i++) {
- rmatch.name = regulators[i].name;
- rmatch.init_data = NULL;
- rmatch.of_node = NULL;
- of_regulator_match(&pdev->dev, regulators_np, &rmatch, 1);
- rdata[i].initdata = rmatch.init_data;
- rdata[i].of_node = rmatch.of_node;
- }
-
- pdata->regulators = rdata;
- of_node_put(regulators_np);
-
- return 0;
-}
-#else
-static int max77686_pmic_dt_parse_pdata(struct platform_device *pdev,
- struct max77686_platform_data *pdata)
-{
- return 0;
-}
-#endif /* CONFIG_OF */
-
static int max77686_pmic_probe(struct platform_device *pdev)
{
struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
- struct max77686_platform_data *pdata = dev_get_platdata(iodev->dev);
struct max77686_data *max77686;
- int i, ret = 0;
+ int i;
struct regulator_config config = { };
dev_dbg(&pdev->dev, "%s\n", __func__);
- if (!pdata) {
- dev_err(&pdev->dev, "no platform data found for regulator\n");
- return -ENODEV;
- }
-
- if (iodev->dev->of_node) {
- ret = max77686_pmic_dt_parse_pdata(pdev, pdata);
- if (ret)
- return ret;
- }
-
- if (pdata->num_regulators != MAX77686_REGULATORS) {
- dev_err(&pdev->dev,
- "Invalid initial data for regulator's initialiation\n");
- return -EINVAL;
- }
-
max77686 = devm_kzalloc(&pdev->dev, sizeof(struct max77686_data),
GFP_KERNEL);
if (!max77686)
return -ENOMEM;
- config.dev = &pdev->dev;
+ config.dev = iodev->dev;
config.regmap = iodev->regmap;
config.driver_data = max77686;
platform_set_drvdata(pdev, max77686);
for (i = 0; i < MAX77686_REGULATORS; i++) {
struct regulator_dev *rdev;
+ int id = regulators[i].id;
- config.init_data = pdata->regulators[i].initdata;
- config.of_node = pdata->regulators[i].of_node;
-
- max77686->opmode[i] = regulators[i].enable_mask;
+ max77686->opmode[id] = MAX77686_NORMAL;
rdev = devm_regulator_register(&pdev->dev,
®ulators[i], &config);
if (IS_ERR(rdev)) {
+ int ret = PTR_ERR(rdev);
dev_err(&pdev->dev,
- "regulator init failed for %d\n", i);
- return PTR_ERR(rdev);
+ "regulator init failed for %d: %d\n", i, ret);
+ return ret;
}
}
diff --git a/drivers/regulator/max77693.c b/drivers/regulator/max77693.c
index d158f71..7b9755a 100644
--- a/drivers/regulator/max77693.c
+++ b/drivers/regulator/max77693.c
@@ -139,7 +139,7 @@
.enable_mask = SAFEOUT_CTRL_ENSAFEOUT##_num##_MASK , \
}
-static struct regulator_desc regulators[] = {
+static const struct regulator_desc regulators[] = {
regulator_desc_esafeout(1),
regulator_desc_esafeout(2),
{
diff --git a/drivers/regulator/max77802.c b/drivers/regulator/max77802.c
index 45fa240..0766615 100644
--- a/drivers/regulator/max77802.c
+++ b/drivers/regulator/max77802.c
@@ -33,6 +33,7 @@
#include <linux/regulator/of_regulator.h>
#include <linux/mfd/max77686.h>
#include <linux/mfd/max77686-private.h>
+#include <dt-bindings/regulator/maxim,max77802.h>
/* Default ramp delay in case it is not manually set */
#define MAX77802_RAMP_DELAY 100000 /* uV/us */
@@ -49,6 +50,10 @@
#define MAX77802_RAMP_RATE_MASK_4BIT 0xF0
#define MAX77802_RAMP_RATE_SHIFT_4BIT 4
+#define MAX77802_STATUS_OFF 0x0
+#define MAX77802_OFF_PWRREQ 0x1
+#define MAX77802_LP_PWRREQ 0x2
+
/* MAX77802 has two register formats: 2-bit and 4-bit */
static const unsigned int ramp_table_77802_2bit[] = {
12500,
@@ -65,9 +70,16 @@
};
struct max77802_regulator_prv {
+ /* Array indexed by regulator id */
unsigned int opmode[MAX77802_REG_MAX];
};
+static inline unsigned int max77802_map_mode(unsigned int mode)
+{
+ return mode == MAX77802_OPMODE_NORMAL ?
+ REGULATOR_MODE_NORMAL : REGULATOR_MODE_STANDBY;
+}
+
static int max77802_get_opmode_shift(int id)
{
if (id == MAX77802_BUCK1 || (id >= MAX77802_BUCK5 &&
@@ -83,17 +95,16 @@
return -EINVAL;
}
-/*
- * Some BUCKS supports Normal[ON/OFF] mode during suspend
+/**
+ * max77802_set_suspend_disable - Disable the regulator during system suspend
+ * @rdev: regulator to mark as disabled
*
- * BUCK 1, 6, 2-4, 5, 7-10 (all)
- *
- * The other mode (0x02) will make PWRREQ switch between normal
- * and low power.
+ * All regulators expect LDO 1, 3, 20 and 21 support OFF by PWRREQ.
+ * Configure the regulator so the PMIC will turn it OFF during system suspend.
*/
-static int max77802_buck_set_suspend_disable(struct regulator_dev *rdev)
+static int max77802_set_suspend_disable(struct regulator_dev *rdev)
{
- unsigned int val = MAX77802_OPMODE_STANDBY;
+ unsigned int val = MAX77802_OFF_PWRREQ;
struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
int id = rdev_get_id(rdev);
int shift = max77802_get_opmode_shift(id);
@@ -104,14 +115,11 @@
}
/*
- * Some LDOs supports LPM-ON/OFF/Normal-ON mode during suspend state
- * (Enable Control Logic1 by PWRREQ)
+ * Some LDOs support Low Power Mode while the system is running.
*
- * LDOs 2, 4-19, 22-35.
- *
+ * LDOs 1, 3, 20, 21.
*/
-static int max77802_ldo_set_suspend_mode_logic1(struct regulator_dev *rdev,
- unsigned int mode)
+static int max77802_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
int id = rdev_get_id(rdev);
@@ -119,14 +127,11 @@
int shift = max77802_get_opmode_shift(id);
switch (mode) {
- case REGULATOR_MODE_IDLE: /* ON in LP Mode */
- val = MAX77802_OPMODE_LP;
+ case REGULATOR_MODE_STANDBY:
+ val = MAX77802_OPMODE_LP; /* ON in Low Power Mode */
break;
- case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
- val = MAX77802_OPMODE_NORMAL;
- break;
- case REGULATOR_MODE_STANDBY: /* ON/OFF by PWRREQ */
- val = MAX77802_OPMODE_STANDBY;
+ case REGULATOR_MODE_NORMAL:
+ val = MAX77802_OPMODE_NORMAL; /* ON in Normal Mode */
break;
default:
dev_warn(&rdev->dev, "%s: regulator mode: 0x%x not supported\n",
@@ -139,35 +144,76 @@
rdev->desc->enable_mask, val << shift);
}
-/*
- * Mode 1 (Output[ON/OFF] by PWRREQ) is not supported on some LDOs
- * (Enable Control Logic2 by PWRREQ)
+static unsigned max77802_get_mode(struct regulator_dev *rdev)
+{
+ struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
+ int id = rdev_get_id(rdev);
+
+ return max77802_map_mode(max77802->opmode[id]);
+}
+
+/**
+ * max77802_set_suspend_mode - set regulator opmode when the system is suspended
+ * @rdev: regulator to change mode
+ * @mode: operating mode to be set
*
- * LDOs 1, 20, 21, and 3,
+ * Will set the operating mode for the regulators during system suspend.
+ * This function is valid for the three different enable control logics:
*
+ * Enable Control Logic1 by PWRREQ (BUCK 2-4 and LDOs 2, 4-19, 22-35)
+ * Enable Control Logic2 by PWRREQ (LDOs 1, 20, 21)
+ * Enable Control Logic3 by PWRREQ (LDO 3)
+ *
+ * If setting the regulator mode fails, the function only warns but does
+ * not return an error code to avoid the regulator core to stop setting
+ * the operating mode for the remaining regulators.
*/
-static int max77802_ldo_set_suspend_mode_logic2(struct regulator_dev *rdev,
- unsigned int mode)
+static int max77802_set_suspend_mode(struct regulator_dev *rdev,
+ unsigned int mode)
{
struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
int id = rdev_get_id(rdev);
unsigned int val;
int shift = max77802_get_opmode_shift(id);
+ /*
+ * If the regulator has been disabled for suspend
+ * then is invalid to try setting a suspend mode.
+ */
+ if (max77802->opmode[id] == MAX77802_OFF_PWRREQ) {
+ dev_warn(&rdev->dev, "%s: is disabled, mode: 0x%x not set\n",
+ rdev->desc->name, mode);
+ return 0;
+ }
+
switch (mode) {
- case REGULATOR_MODE_IDLE: /* ON in LP Mode */
- val = MAX77802_OPMODE_LP;
+ case REGULATOR_MODE_STANDBY:
+ /*
+ * If the regulator opmode is normal then enable
+ * ON in Low Power Mode by PWRREQ. If the mode is
+ * already Low Power then no action is required.
+ */
+ if (max77802->opmode[id] == MAX77802_OPMODE_NORMAL)
+ val = MAX77802_LP_PWRREQ;
+ else
+ return 0;
break;
- case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
- val = MAX77802_OPMODE_NORMAL;
- break;
+ case REGULATOR_MODE_NORMAL:
+ /*
+ * If the regulator operating mode is Low Power then
+ * normal is not a valid opmode in suspend. If the
+ * mode is already normal then no action is required.
+ */
+ if (max77802->opmode[id] == MAX77802_OPMODE_LP)
+ dev_warn(&rdev->dev, "%s: in Low Power: 0x%x invalid\n",
+ rdev->desc->name, mode);
+ return 0;
default:
dev_warn(&rdev->dev, "%s: regulator mode: 0x%x not supported\n",
rdev->desc->name, mode);
return -EINVAL;
}
- max77802->opmode[id] = val;
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask, val << shift);
}
@@ -178,6 +224,9 @@
int id = rdev_get_id(rdev);
int shift = max77802_get_opmode_shift(id);
+ if (max77802->opmode[id] == MAX77802_OFF_PWRREQ)
+ max77802->opmode[id] = MAX77802_OPMODE_NORMAL;
+
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask,
max77802->opmode[id] << shift);
@@ -247,7 +296,8 @@
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
- .set_suspend_mode = max77802_ldo_set_suspend_mode_logic1,
+ .set_suspend_disable = max77802_set_suspend_disable,
+ .set_suspend_mode = max77802_set_suspend_mode,
};
/*
@@ -262,7 +312,9 @@
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
- .set_suspend_mode = max77802_ldo_set_suspend_mode_logic2,
+ .set_mode = max77802_set_mode,
+ .get_mode = max77802_get_mode,
+ .set_suspend_mode = max77802_set_suspend_mode,
};
/* BUCKS 1, 6 */
@@ -276,10 +328,25 @@
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = max77802_set_ramp_delay_4bit,
- .set_suspend_disable = max77802_buck_set_suspend_disable,
+ .set_suspend_disable = max77802_set_suspend_disable,
};
-/* BUCKs 2-4, 5, 7-10 */
+/* BUCKs 2-4 */
+static struct regulator_ops max77802_buck_234_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = max77802_enable,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_ramp_delay = max77802_set_ramp_delay_2bit,
+ .set_suspend_disable = max77802_set_suspend_disable,
+ .set_suspend_mode = max77802_set_suspend_mode,
+};
+
+/* BUCKs 5, 7-10 */
static struct regulator_ops max77802_buck_dvs_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
@@ -290,12 +357,14 @@
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = max77802_set_ramp_delay_2bit,
- .set_suspend_disable = max77802_buck_set_suspend_disable,
+ .set_suspend_disable = max77802_set_suspend_disable,
};
/* LDOs 3-7, 9-14, 18-26, 28, 29, 32-34 */
#define regulator_77802_desc_p_ldo(num, supply, log) { \
.name = "LDO"#num, \
+ .of_match = of_match_ptr("LDO"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
.id = MAX77802_LDO##num, \
.supply_name = "inl"#supply, \
.ops = &max77802_ldo_ops_logic##log, \
@@ -309,11 +378,14 @@
.vsel_mask = MAX77802_VSEL_MASK, \
.enable_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \
.enable_mask = MAX77802_OPMODE_MASK << MAX77802_OPMODE_SHIFT_LDO, \
+ .of_map_mode = max77802_map_mode, \
}
/* LDOs 1, 2, 8, 15, 17, 27, 30, 35 */
#define regulator_77802_desc_n_ldo(num, supply, log) { \
.name = "LDO"#num, \
+ .of_match = of_match_ptr("LDO"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
.id = MAX77802_LDO##num, \
.supply_name = "inl"#supply, \
.ops = &max77802_ldo_ops_logic##log, \
@@ -327,11 +399,14 @@
.vsel_mask = MAX77802_VSEL_MASK, \
.enable_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \
.enable_mask = MAX77802_OPMODE_MASK << MAX77802_OPMODE_SHIFT_LDO, \
+ .of_map_mode = max77802_map_mode, \
}
/* BUCKs 1, 6 */
#define regulator_77802_desc_16_buck(num) { \
.name = "BUCK"#num, \
+ .of_match = of_match_ptr("BUCK"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
.id = MAX77802_BUCK##num, \
.supply_name = "inb"#num, \
.ops = &max77802_buck_16_dvs_ops, \
@@ -345,14 +420,17 @@
.vsel_mask = MAX77802_DVS_VSEL_MASK, \
.enable_reg = MAX77802_REG_BUCK ## num ## CTRL, \
.enable_mask = MAX77802_OPMODE_MASK, \
+ .of_map_mode = max77802_map_mode, \
}
/* BUCKS 2-4 */
#define regulator_77802_desc_234_buck(num) { \
.name = "BUCK"#num, \
+ .of_match = of_match_ptr("BUCK"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
.id = MAX77802_BUCK##num, \
.supply_name = "inb"#num, \
- .ops = &max77802_buck_dvs_ops, \
+ .ops = &max77802_buck_234_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = 600000, \
@@ -364,11 +442,14 @@
.enable_reg = MAX77802_REG_BUCK ## num ## CTRL1, \
.enable_mask = MAX77802_OPMODE_MASK << \
MAX77802_OPMODE_BUCK234_SHIFT, \
+ .of_map_mode = max77802_map_mode, \
}
/* BUCK 5 */
#define regulator_77802_desc_buck5(num) { \
.name = "BUCK"#num, \
+ .of_match = of_match_ptr("BUCK"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
.id = MAX77802_BUCK##num, \
.supply_name = "inb"#num, \
.ops = &max77802_buck_dvs_ops, \
@@ -382,11 +463,14 @@
.vsel_mask = MAX77802_VSEL_MASK, \
.enable_reg = MAX77802_REG_BUCK5CTRL, \
.enable_mask = MAX77802_OPMODE_MASK, \
+ .of_map_mode = max77802_map_mode, \
}
/* BUCKs 7-10 */
#define regulator_77802_desc_buck7_10(num) { \
.name = "BUCK"#num, \
+ .of_match = of_match_ptr("BUCK"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
.id = MAX77802_BUCK##num, \
.supply_name = "inb"#num, \
.ops = &max77802_buck_dvs_ops, \
@@ -400,9 +484,10 @@
.vsel_mask = MAX77802_VSEL_MASK, \
.enable_reg = MAX77802_REG_BUCK7CTRL + (num - 7) * 3, \
.enable_mask = MAX77802_OPMODE_MASK, \
+ .of_map_mode = max77802_map_mode, \
}
-static struct regulator_desc regulators[] = {
+static const struct regulator_desc regulators[] = {
regulator_77802_desc_16_buck(1),
regulator_77802_desc_234_buck(2),
regulator_77802_desc_234_buck(3),
@@ -447,85 +532,19 @@
regulator_77802_desc_n_ldo(35, 2, 1),
};
-#ifdef CONFIG_OF
-static int max77802_pmic_dt_parse_pdata(struct platform_device *pdev,
- struct max77686_platform_data *pdata)
-{
- struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
- struct device_node *pmic_np, *regulators_np;
- struct max77686_regulator_data *rdata;
- struct of_regulator_match rmatch = { };
- unsigned int i;
-
- pmic_np = iodev->dev->of_node;
- regulators_np = of_get_child_by_name(pmic_np, "regulators");
- if (!regulators_np) {
- dev_err(&pdev->dev, "could not find regulators sub-node\n");
- return -EINVAL;
- }
-
- pdata->num_regulators = ARRAY_SIZE(regulators);
- rdata = devm_kzalloc(&pdev->dev, sizeof(*rdata) *
- pdata->num_regulators, GFP_KERNEL);
- if (!rdata) {
- of_node_put(regulators_np);
- return -ENOMEM;
- }
-
- for (i = 0; i < pdata->num_regulators; i++) {
- rmatch.name = regulators[i].name;
- rmatch.init_data = NULL;
- rmatch.of_node = NULL;
- if (of_regulator_match(&pdev->dev, regulators_np, &rmatch,
- 1) != 1) {
- dev_warn(&pdev->dev, "No matching regulator for '%s'\n",
- rmatch.name);
- continue;
- }
- rdata[i].initdata = rmatch.init_data;
- rdata[i].of_node = rmatch.of_node;
- rdata[i].id = regulators[i].id;
- }
-
- pdata->regulators = rdata;
- of_node_put(regulators_np);
-
- return 0;
-}
-#else
-static int max77802_pmic_dt_parse_pdata(struct platform_device *pdev,
- struct max77686_platform_data *pdata)
-{
- return 0;
-}
-#endif /* CONFIG_OF */
-
static int max77802_pmic_probe(struct platform_device *pdev)
{
struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
- struct max77686_platform_data *pdata = dev_get_platdata(iodev->dev);
struct max77802_regulator_prv *max77802;
- int i, ret = 0, val;
+ int i, val;
struct regulator_config config = { };
- /* This is allocated by the MFD driver */
- if (!pdata) {
- dev_err(&pdev->dev, "no platform data found for regulator\n");
- return -ENODEV;
- }
-
max77802 = devm_kzalloc(&pdev->dev,
sizeof(struct max77802_regulator_prv),
GFP_KERNEL);
if (!max77802)
return -ENOMEM;
- if (iodev->dev->of_node) {
- ret = max77802_pmic_dt_parse_pdata(pdev, pdata);
- if (ret)
- return ret;
- }
-
config.dev = iodev->dev;
config.regmap = iodev->regmap;
config.driver_data = max77802;
@@ -533,21 +552,25 @@
for (i = 0; i < MAX77802_REG_MAX; i++) {
struct regulator_dev *rdev;
- int id = pdata->regulators[i].id;
+ int id = regulators[i].id;
int shift = max77802_get_opmode_shift(id);
-
- config.init_data = pdata->regulators[i].initdata;
- config.of_node = pdata->regulators[i].of_node;
+ int ret;
ret = regmap_read(iodev->regmap, regulators[i].enable_reg, &val);
- val = val >> shift & MAX77802_OPMODE_MASK;
+ if (ret < 0) {
+ dev_warn(&pdev->dev,
+ "cannot read current mode for %d\n", i);
+ val = MAX77802_OPMODE_NORMAL;
+ } else {
+ val = val >> shift & MAX77802_OPMODE_MASK;
+ }
/*
* If the regulator is disabled and the system warm rebooted,
* the hardware reports OFF as the regulator operating mode.
* Default to operating mode NORMAL in that case.
*/
- if (val == MAX77802_OPMODE_OFF)
+ if (val == MAX77802_STATUS_OFF)
max77802->opmode[id] = MAX77802_OPMODE_NORMAL;
else
max77802->opmode[id] = val;
@@ -555,9 +578,10 @@
rdev = devm_regulator_register(&pdev->dev,
®ulators[i], &config);
if (IS_ERR(rdev)) {
+ ret = PTR_ERR(rdev);
dev_err(&pdev->dev,
- "regulator init failed for %d\n", i);
- return PTR_ERR(rdev);
+ "regulator init failed for %d: %d\n", i, ret);
+ return ret;
}
}
diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c
index f7f9efc..1af8f4a 100644
--- a/drivers/regulator/max8952.c
+++ b/drivers/regulator/max8952.c
@@ -174,7 +174,7 @@
if (of_property_read_u32(np, "max8952,ramp-speed", &pd->ramp_speed))
dev_warn(dev, "max8952,ramp-speed property not specified, defaulting to 32mV/us\n");
- pd->reg_data = of_get_regulator_init_data(dev, np);
+ pd->reg_data = of_get_regulator_init_data(dev, np, ®ulator);
if (!pd->reg_data) {
dev_err(dev, "Failed to parse regulator init data\n");
return NULL;
@@ -225,6 +225,8 @@
config.of_node = client->dev.of_node;
config.ena_gpio = pdata->gpio_en;
+ if (client->dev.of_node)
+ config.ena_gpio_initialized = true;
if (pdata->reg_data->constraints.boot_on)
config.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
diff --git a/drivers/regulator/max8973-regulator.c b/drivers/regulator/max8973-regulator.c
index dbedf17..c3d55c2 100644
--- a/drivers/regulator/max8973-regulator.c
+++ b/drivers/regulator/max8973-regulator.c
@@ -458,7 +458,8 @@
config.dev = &client->dev;
config.init_data = pdata ? pdata->reg_init_data :
- of_get_regulator_init_data(&client->dev, client->dev.of_node);
+ of_get_regulator_init_data(&client->dev, client->dev.of_node,
+ &max->desc);
config.driver_data = max;
config.of_node = client->dev.of_node;
config.regmap = max->regmap;
diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c
index 9c31e21..726fde1 100644
--- a/drivers/regulator/max8997.c
+++ b/drivers/regulator/max8997.c
@@ -953,7 +953,8 @@
rdata->id = i;
rdata->initdata = of_get_regulator_init_data(&pdev->dev,
- reg_np);
+ reg_np,
+ ®ulators[i]);
rdata->reg_node = reg_np;
rdata++;
}
diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index 961091b..59e34a0 100644
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -686,8 +686,9 @@
continue;
rdata->id = regulators[i].id;
- rdata->initdata = of_get_regulator_init_data(
- iodev->dev, reg_np);
+ rdata->initdata = of_get_regulator_init_data(iodev->dev,
+ reg_np,
+ ®ulators[i]);
rdata->reg_node = reg_np;
++rdata;
}
diff --git a/drivers/regulator/mc13xxx-regulator-core.c b/drivers/regulator/mc13xxx-regulator-core.c
index afba024..0281c31 100644
--- a/drivers/regulator/mc13xxx-regulator-core.c
+++ b/drivers/regulator/mc13xxx-regulator-core.c
@@ -194,7 +194,8 @@
regulators[i].desc.name)) {
p->id = i;
p->init_data = of_get_regulator_init_data(
- &pdev->dev, child);
+ &pdev->dev, child,
+ ®ulators[i].desc);
p->node = child;
p++;
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index 5a1d4af..91eaaf0 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -19,12 +19,20 @@
#include "internal.h"
+static const char *const regulator_states[PM_SUSPEND_MAX + 1] = {
+ [PM_SUSPEND_MEM] = "regulator-state-mem",
+ [PM_SUSPEND_MAX] = "regulator-state-disk",
+};
+
static void of_get_regulation_constraints(struct device_node *np,
- struct regulator_init_data **init_data)
+ struct regulator_init_data **init_data,
+ const struct regulator_desc *desc)
{
const __be32 *min_uV, *max_uV;
struct regulation_constraints *constraints = &(*init_data)->constraints;
- int ret;
+ struct regulator_state *suspend_state;
+ struct device_node *suspend_np;
+ int ret, i;
u32 pval;
constraints->name = of_get_property(np, "regulator-name", NULL);
@@ -73,18 +81,84 @@
ret = of_property_read_u32(np, "regulator-enable-ramp-delay", &pval);
if (!ret)
constraints->enable_time = pval;
+
+ if (!of_property_read_u32(np, "regulator-initial-mode", &pval)) {
+ if (desc && desc->of_map_mode) {
+ ret = desc->of_map_mode(pval);
+ if (ret == -EINVAL)
+ pr_err("%s: invalid mode %u\n", np->name, pval);
+ else
+ constraints->initial_mode = ret;
+ } else {
+ pr_warn("%s: mapping for mode %d not defined\n",
+ np->name, pval);
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(regulator_states); i++) {
+ switch (i) {
+ case PM_SUSPEND_MEM:
+ suspend_state = &constraints->state_mem;
+ break;
+ case PM_SUSPEND_MAX:
+ suspend_state = &constraints->state_disk;
+ break;
+ case PM_SUSPEND_ON:
+ case PM_SUSPEND_FREEZE:
+ case PM_SUSPEND_STANDBY:
+ default:
+ continue;
+ };
+
+ suspend_np = of_get_child_by_name(np, regulator_states[i]);
+ if (!suspend_np || !suspend_state)
+ continue;
+
+ if (!of_property_read_u32(suspend_np, "regulator-mode",
+ &pval)) {
+ if (desc && desc->of_map_mode) {
+ ret = desc->of_map_mode(pval);
+ if (ret == -EINVAL)
+ pr_err("%s: invalid mode %u\n",
+ np->name, pval);
+ else
+ suspend_state->mode = ret;
+ } else {
+ pr_warn("%s: mapping for mode %d not defined\n",
+ np->name, pval);
+ }
+ }
+
+ if (of_property_read_bool(suspend_np,
+ "regulator-on-in-suspend"))
+ suspend_state->enabled = true;
+ else if (of_property_read_bool(suspend_np,
+ "regulator-off-in-suspend"))
+ suspend_state->disabled = true;
+
+ if (!of_property_read_u32(suspend_np,
+ "regulator-suspend-microvolt", &pval))
+ suspend_state->uV = pval;
+
+ of_node_put(suspend_np);
+ suspend_state = NULL;
+ suspend_np = NULL;
+ }
}
/**
* of_get_regulator_init_data - extract regulator_init_data structure info
* @dev: device requesting for regulator_init_data
+ * @node: regulator device node
+ * @desc: regulator description
*
* Populates regulator_init_data structure by extracting data from device
* tree node, returns a pointer to the populated struture or NULL if memory
* alloc fails.
*/
struct regulator_init_data *of_get_regulator_init_data(struct device *dev,
- struct device_node *node)
+ struct device_node *node,
+ const struct regulator_desc *desc)
{
struct regulator_init_data *init_data;
@@ -95,7 +169,7 @@
if (!init_data)
return NULL; /* Out of memory? */
- of_get_regulation_constraints(node, &init_data);
+ of_get_regulation_constraints(node, &init_data, desc);
return init_data;
}
EXPORT_SYMBOL_GPL(of_get_regulator_init_data);
@@ -176,7 +250,8 @@
continue;
match->init_data =
- of_get_regulator_init_data(dev, child);
+ of_get_regulator_init_data(dev, child,
+ match->desc);
if (!match->init_data) {
dev_err(dev,
"failed to parse DT for regulator %s\n",
@@ -224,7 +299,7 @@
if (strcmp(desc->of_match, name))
continue;
- init_data = of_get_regulator_init_data(dev, child);
+ init_data = of_get_regulator_init_data(dev, child, desc);
if (!init_data) {
dev_err(dev,
"failed to parse DT for regulator %s\n",
diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index d3f55ea..91f34ca 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -149,7 +149,8 @@
return ret;
}
- config.init_data = of_get_regulator_init_data(&pdev->dev, np);
+ config.init_data = of_get_regulator_init_data(&pdev->dev, np,
+ &drvdata->desc);
if (!config.init_data)
return -ENOMEM;
diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c
index b55cd5b..183598b 100644
--- a/drivers/regulator/qcom_rpm-regulator.c
+++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -183,6 +183,13 @@
REGULATOR_LINEAR_RANGE(1500000, 64, 100, 50000),
};
+static const struct regulator_linear_range smb208_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500),
+ REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000),
+ REGULATOR_LINEAR_RANGE(3100000, 154, 234, 25000),
+};
+
static const struct regulator_linear_range ncp_ranges[] = {
REGULATOR_LINEAR_RANGE(1500000, 0, 31, 50000),
};
@@ -559,6 +566,16 @@
.parts = &rpm8960_switch_parts,
};
+static const struct qcom_rpm_reg smb208_smps = {
+ .desc.linear_ranges = smb208_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(smb208_ranges),
+ .desc.n_voltages = 235,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_smps_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = false,
+};
+
static const struct of_device_id rpm_of_match[] = {
{ .compatible = "qcom,rpm-pm8058-pldo", .data = &pm8058_pldo },
{ .compatible = "qcom,rpm-pm8058-nldo", .data = &pm8058_nldo },
@@ -578,6 +595,8 @@
{ .compatible = "qcom,rpm-pm8921-ftsmps", .data = &pm8921_ftsmps },
{ .compatible = "qcom,rpm-pm8921-ncp", .data = &pm8921_ncp },
{ .compatible = "qcom,rpm-pm8921-switch", .data = &pm8921_switch },
+
+ { .compatible = "qcom,rpm-smb208", .data = &smb208_smps },
{ }
};
MODULE_DEVICE_TABLE(of, rpm_of_match);
@@ -643,10 +662,6 @@
match = of_match_device(rpm_of_match, &pdev->dev);
template = match->data;
- initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node);
- if (!initdata)
- return -EINVAL;
-
vreg = devm_kmalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL);
if (!vreg) {
dev_err(&pdev->dev, "failed to allocate vreg\n");
@@ -666,6 +681,11 @@
return -ENODEV;
}
+ initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node,
+ &vreg->desc);
+ if (!initdata)
+ return -EINVAL;
+
key = "reg";
ret = of_property_read_u32(pdev->dev.of_node, key, &val);
if (ret) {
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 196a5c8..ea9d05e 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -36,6 +36,12 @@
#define RK808_RAMP_RATE_6MV_PER_US (2 << RK808_RAMP_RATE_OFFSET)
#define RK808_RAMP_RATE_10MV_PER_US (3 << RK808_RAMP_RATE_OFFSET)
+/* Offset from XXX_ON_VSEL to XXX_SLP_VSEL */
+#define RK808_SLP_REG_OFFSET 1
+
+/* Offset from XXX_EN_REG to SLEEP_SET_OFF_XXX */
+#define RK808_SLP_SET_OFF_REG_OFFSET 2
+
static const int rk808_buck_config_regs[] = {
RK808_BUCK1_CONFIG_REG,
RK808_BUCK2_CONFIG_REG,
@@ -91,6 +97,43 @@
RK808_RAMP_RATE_MASK, ramp_value);
}
+int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
+{
+ unsigned int reg;
+ int sel = regulator_map_voltage_linear_range(rdev, uv, uv);
+
+ if (sel < 0)
+ return -EINVAL;
+
+ reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
+
+ return regmap_update_bits(rdev->regmap, reg,
+ rdev->desc->vsel_mask,
+ sel);
+}
+
+int rk808_set_suspend_enable(struct regulator_dev *rdev)
+{
+ unsigned int reg;
+
+ reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
+
+ return regmap_update_bits(rdev->regmap, reg,
+ rdev->desc->enable_mask,
+ 0);
+}
+
+int rk808_set_suspend_disable(struct regulator_dev *rdev)
+{
+ unsigned int reg;
+
+ reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
+
+ return regmap_update_bits(rdev->regmap, reg,
+ rdev->desc->enable_mask,
+ rdev->desc->enable_mask);
+}
+
static struct regulator_ops rk808_buck1_2_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
@@ -100,6 +143,9 @@
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_ramp_delay = rk808_set_ramp_delay,
+ .set_suspend_voltage = rk808_set_suspend_voltage,
+ .set_suspend_enable = rk808_set_suspend_enable,
+ .set_suspend_disable = rk808_set_suspend_disable,
};
static struct regulator_ops rk808_reg_ops = {
@@ -110,12 +156,17 @@
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_voltage = rk808_set_suspend_voltage,
+ .set_suspend_enable = rk808_set_suspend_enable,
+ .set_suspend_disable = rk808_set_suspend_disable,
};
static struct regulator_ops rk808_switch_ops = {
- .enable = regulator_enable_regmap,
- .disable = regulator_disable_regmap,
- .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_enable = rk808_set_suspend_enable,
+ .set_suspend_disable = rk808_set_suspend_disable,
};
static const struct regulator_desc rk808_reg[] = {
diff --git a/drivers/regulator/rn5t618-regulator.c b/drivers/regulator/rn5t618-regulator.c
index e58d79a..b85ceb8 100644
--- a/drivers/regulator/rn5t618-regulator.c
+++ b/drivers/regulator/rn5t618-regulator.c
@@ -31,6 +31,8 @@
#define REG(rid, ereg, emask, vreg, vmask, min, max, step) \
[RN5T618_##rid] = { \
.name = #rid, \
+ .of_match = of_match_ptr(#rid), \
+ .regulators_node = of_match_ptr("regulators"), \
.id = RN5T618_##rid, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
@@ -60,60 +62,15 @@
REG(LDORTC2, LDOEN2, BIT(5), LDORTC2DAC, 0x7f, 900000, 3500000, 25000),
};
-static struct of_regulator_match rn5t618_matches[] = {
- [RN5T618_DCDC1] = { .name = "DCDC1" },
- [RN5T618_DCDC2] = { .name = "DCDC2" },
- [RN5T618_DCDC3] = { .name = "DCDC3" },
- [RN5T618_LDO1] = { .name = "LDO1" },
- [RN5T618_LDO2] = { .name = "LDO2" },
- [RN5T618_LDO3] = { .name = "LDO3" },
- [RN5T618_LDO4] = { .name = "LDO4" },
- [RN5T618_LDO5] = { .name = "LDO5" },
- [RN5T618_LDORTC1] = { .name = "LDORTC1" },
- [RN5T618_LDORTC2] = { .name = "LDORTC2" },
-};
-
-static int rn5t618_regulator_parse_dt(struct platform_device *pdev)
-{
- struct device_node *np, *regulators;
- int ret;
-
- np = of_node_get(pdev->dev.parent->of_node);
- if (!np)
- return 0;
-
- regulators = of_get_child_by_name(np, "regulators");
- if (!regulators) {
- dev_err(&pdev->dev, "regulators node not found\n");
- return -EINVAL;
- }
-
- ret = of_regulator_match(&pdev->dev, regulators, rn5t618_matches,
- ARRAY_SIZE(rn5t618_matches));
- of_node_put(regulators);
- if (ret < 0) {
- dev_err(&pdev->dev, "error parsing regulator init data: %d\n",
- ret);
- }
-
- return 0;
-}
-
static int rn5t618_regulator_probe(struct platform_device *pdev)
{
struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent);
struct regulator_config config = { };
struct regulator_dev *rdev;
- int ret, i;
-
- ret = rn5t618_regulator_parse_dt(pdev);
- if (ret)
- return ret;
+ int i;
for (i = 0; i < RN5T618_REG_NUM; i++) {
- config.dev = &pdev->dev;
- config.init_data = rn5t618_matches[i].init_data;
- config.of_node = rn5t618_matches[i].of_node;
+ config.dev = pdev->dev.parent;
config.regmap = rn5t618->regmap;
rdev = devm_regulator_register(&pdev->dev,
diff --git a/drivers/regulator/rt5033-regulator.c b/drivers/regulator/rt5033-regulator.c
new file mode 100644
index 0000000..870cc49
--- /dev/null
+++ b/drivers/regulator/rt5033-regulator.c
@@ -0,0 +1,123 @@
+/*
+ * Regulator driver for the Richtek RT5033
+ *
+ * Copyright (C) 2014 Samsung Electronics, Co., Ltd.
+ * Author: Beomho Seo <beomho.seo@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published bythe Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/mfd/rt5033.h>
+#include <linux/mfd/rt5033-private.h>
+#include <linux/regulator/of_regulator.h>
+
+static struct regulator_ops rt5033_safe_ldo_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+};
+
+static struct regulator_ops rt5033_buck_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_desc rt5033_supported_regulators[] = {
+ [RT5033_BUCK] = {
+ .name = "BUCK",
+ .id = RT5033_BUCK,
+ .ops = &rt5033_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .n_voltages = RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM,
+ .min_uV = RT5033_REGULATOR_BUCK_VOLTAGE_MIN,
+ .uV_step = RT5033_REGULATOR_BUCK_VOLTAGE_STEP,
+ .enable_reg = RT5033_REG_CTRL,
+ .enable_mask = RT5033_CTRL_EN_BUCK_MASK,
+ .vsel_reg = RT5033_REG_BUCK_CTRL,
+ .vsel_mask = RT5033_BUCK_CTRL_MASK,
+ },
+ [RT5033_LDO] = {
+ .name = "LDO",
+ .id = RT5033_LDO,
+ .ops = &rt5033_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .n_voltages = RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM,
+ .min_uV = RT5033_REGULATOR_LDO_VOLTAGE_MIN,
+ .uV_step = RT5033_REGULATOR_LDO_VOLTAGE_STEP,
+ .enable_reg = RT5033_REG_CTRL,
+ .enable_mask = RT5033_CTRL_EN_LDO_MASK,
+ .vsel_reg = RT5033_REG_LDO_CTRL,
+ .vsel_mask = RT5033_LDO_CTRL_MASK,
+ },
+ [RT5033_SAFE_LDO] = {
+ .name = "SAFE_LDO",
+ .id = RT5033_SAFE_LDO,
+ .ops = &rt5033_safe_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ .min_uV = RT5033_REGULATOR_SAFE_LDO_VOLTAGE,
+ .enable_reg = RT5033_REG_CTRL,
+ .enable_mask = RT5033_CTRL_EN_SAFE_LDO_MASK,
+ },
+};
+
+static int rt5033_regulator_probe(struct platform_device *pdev)
+{
+ struct rt5033_dev *rt5033 = dev_get_drvdata(pdev->dev.parent);
+ int ret, i;
+ struct regulator_config config = {};
+
+ config.dev = &pdev->dev;
+ config.driver_data = rt5033;
+
+ for (i = 0; i < ARRAY_SIZE(rt5033_supported_regulators); i++) {
+ struct regulator_dev *regulator;
+
+ config.regmap = rt5033->regmap;
+
+ regulator = devm_regulator_register(&pdev->dev,
+ &rt5033_supported_regulators[i], &config);
+ if (IS_ERR(regulator)) {
+ ret = PTR_ERR(regulator);
+ dev_err(&pdev->dev,
+ "Regulator init failed %d: with error: %d\n",
+ i, ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id rt5033_regulator_id[] = {
+ { "rt5033-regulator", },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, rt5033_regulator_id);
+
+static struct platform_driver rt5033_regulator_driver = {
+ .driver = {
+ .name = "rt5033-regulator",
+ },
+ .probe = rt5033_regulator_probe,
+ .id_table = rt5033_regulator_id,
+};
+module_platform_driver(rt5033_regulator_driver);
+
+MODULE_DESCRIPTION("Richtek RT5033 Regulator driver");
+MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/s2mpa01.c b/drivers/regulator/s2mpa01.c
index 7633b9b..5db4e12 100644
--- a/drivers/regulator/s2mpa01.c
+++ b/drivers/regulator/s2mpa01.c
@@ -298,7 +298,7 @@
.enable_mask = S2MPA01_ENABLE_MASK \
}
-static struct regulator_desc regulators[] = {
+static const struct regulator_desc regulators[] = {
regulator_desc_ldo(1, STEP_25_MV),
regulator_desc_ldo(2, STEP_50_MV),
regulator_desc_ldo(3, STEP_50_MV),
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index adab82d..b345cf5 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -30,6 +30,7 @@
#include <linux/of_gpio.h>
#include <linux/mfd/samsung/core.h>
#include <linux/mfd/samsung/s2mps11.h>
+#include <linux/mfd/samsung/s2mps13.h>
#include <linux/mfd/samsung/s2mps14.h>
#include <linux/mfd/samsung/s2mpu02.h>
@@ -45,10 +46,10 @@
enum sec_device_type dev_type;
/*
- * One bit for each S2MPS14/S2MPU02 regulator whether the suspend mode
- * was enabled.
+ * One bit for each S2MPS13/S2MPS14/S2MPU02 regulator whether
+ * the suspend mode was enabled.
*/
- unsigned long long s2mps14_suspend_state:35;
+ unsigned long long s2mps14_suspend_state:50;
/* Array of size rdev_num with GPIO-s for external sleep control */
int *ext_control_gpio;
@@ -369,12 +370,101 @@
regulator_desc_s2mps11_buck6_10(10, MIN_750_MV, STEP_12_5_MV),
};
+static struct regulator_ops s2mps14_reg_ops;
+
+#define regulator_desc_s2mps13_ldo(num, min, step, min_sel) { \
+ .name = "LDO"#num, \
+ .id = S2MPS13_LDO##num, \
+ .ops = &s2mps14_reg_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = min, \
+ .uV_step = step, \
+ .linear_min_sel = min_sel, \
+ .n_voltages = S2MPS14_LDO_N_VOLTAGES, \
+ .vsel_reg = S2MPS13_REG_L1CTRL + num - 1, \
+ .vsel_mask = S2MPS14_LDO_VSEL_MASK, \
+ .enable_reg = S2MPS13_REG_L1CTRL + num - 1, \
+ .enable_mask = S2MPS14_ENABLE_MASK \
+}
+
+#define regulator_desc_s2mps13_buck(num, min, step, min_sel) { \
+ .name = "BUCK"#num, \
+ .id = S2MPS13_BUCK##num, \
+ .ops = &s2mps14_reg_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = min, \
+ .uV_step = step, \
+ .linear_min_sel = min_sel, \
+ .n_voltages = S2MPS14_BUCK_N_VOLTAGES, \
+ .ramp_delay = S2MPS13_BUCK_RAMP_DELAY, \
+ .vsel_reg = S2MPS13_REG_B1OUT + (num - 1) * 2, \
+ .vsel_mask = S2MPS14_BUCK_VSEL_MASK, \
+ .enable_reg = S2MPS13_REG_B1CTRL + (num - 1) * 2, \
+ .enable_mask = S2MPS14_ENABLE_MASK \
+}
+
+static const struct regulator_desc s2mps13_regulators[] = {
+ regulator_desc_s2mps13_ldo(1, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(2, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(3, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(4, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(5, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(6, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(7, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(8, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(9, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(10, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(11, MIN_800_MV, STEP_25_MV, 0x10),
+ regulator_desc_s2mps13_ldo(12, MIN_800_MV, STEP_25_MV, 0x10),
+ regulator_desc_s2mps13_ldo(13, MIN_800_MV, STEP_25_MV, 0x10),
+ regulator_desc_s2mps13_ldo(14, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(15, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(16, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(17, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(18, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(19, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(20, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(21, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(22, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(23, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(24, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(25, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(26, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(27, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(28, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(29, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(30, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(31, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(32, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(33, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(34, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(35, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(36, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(37, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(38, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(39, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(40, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_buck(1, MIN_500_MV, STEP_6_25_MV, 0x10),
+ regulator_desc_s2mps13_buck(2, MIN_500_MV, STEP_6_25_MV, 0x10),
+ regulator_desc_s2mps13_buck(3, MIN_500_MV, STEP_6_25_MV, 0x10),
+ regulator_desc_s2mps13_buck(4, MIN_500_MV, STEP_6_25_MV, 0x10),
+ regulator_desc_s2mps13_buck(5, MIN_500_MV, STEP_6_25_MV, 0x10),
+ regulator_desc_s2mps13_buck(6, MIN_500_MV, STEP_6_25_MV, 0x10),
+ regulator_desc_s2mps13_buck(7, MIN_500_MV, STEP_6_25_MV, 0x10),
+ regulator_desc_s2mps13_buck(8, MIN_1000_MV, STEP_12_5_MV, 0x20),
+ regulator_desc_s2mps13_buck(9, MIN_1000_MV, STEP_12_5_MV, 0x20),
+ regulator_desc_s2mps13_buck(10, MIN_500_MV, STEP_6_25_MV, 0x10),
+};
+
static int s2mps14_regulator_enable(struct regulator_dev *rdev)
{
struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
unsigned int val;
switch (s2mps11->dev_type) {
+ case S2MPS13X:
case S2MPS14X:
if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev)))
val = S2MPS14_ENABLE_SUSPEND;
@@ -406,6 +496,7 @@
/* Below LDO should be always on or does not support suspend mode. */
switch (s2mps11->dev_type) {
+ case S2MPS13X:
case S2MPS14X:
switch (rdev_id) {
case S2MPS14_LDO3:
@@ -831,6 +922,10 @@
s2mps11->rdev_num = ARRAY_SIZE(s2mps11_regulators);
regulators = s2mps11_regulators;
break;
+ case S2MPS13X:
+ s2mps11->rdev_num = ARRAY_SIZE(s2mps13_regulators);
+ regulators = s2mps13_regulators;
+ break;
case S2MPS14X:
s2mps11->rdev_num = ARRAY_SIZE(s2mps14_regulators);
regulators = s2mps14_regulators;
@@ -845,7 +940,7 @@
return -EINVAL;
};
- s2mps11->ext_control_gpio = devm_kzalloc(&pdev->dev,
+ s2mps11->ext_control_gpio = devm_kmalloc(&pdev->dev,
sizeof(*s2mps11->ext_control_gpio) * s2mps11->rdev_num,
GFP_KERNEL);
if (!s2mps11->ext_control_gpio)
@@ -886,6 +981,7 @@
config.regmap = iodev->regmap_pmic;
config.driver_data = s2mps11;
config.ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
+ config.ena_gpio_initialized = true;
for (i = 0; i < s2mps11->rdev_num; i++) {
struct regulator_dev *regulator;
@@ -927,6 +1023,7 @@
static const struct platform_device_id s2mps11_pmic_id[] = {
{ "s2mps11-pmic", S2MPS11X},
+ { "s2mps13-pmic", S2MPS13X},
{ "s2mps14-pmic", S2MPS14X},
{ "s2mpu02-pmic", S2MPU02},
{ },
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index 0ab5cbe..dc1328c 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -581,7 +581,8 @@
rdata->id = i;
rdata->initdata = of_get_regulator_init_data(
- &pdev->dev, reg_np);
+ &pdev->dev, reg_np,
+ ®ulators[i]);
rdata->reg_node = reg_np;
rdata++;
rmode->id = i;
@@ -950,6 +951,7 @@
config.of_node = pdata->regulators[i].reg_node;
config.ena_gpio = -EINVAL;
config.ena_gpio_flags = 0;
+ config.ena_gpio_initialized = true;
if (gpio_is_valid(pdata->regulators[i].ext_control_gpio))
s5m8767_regulator_config_ext_control(s5m8767,
&pdata->regulators[i], &config);
diff --git a/drivers/regulator/sky81452-regulator.c b/drivers/regulator/sky81452-regulator.c
index 97aff0c..6478606 100644
--- a/drivers/regulator/sky81452-regulator.c
+++ b/drivers/regulator/sky81452-regulator.c
@@ -5,9 +5,8 @@
* Author : Gyungoh Yoo <jack.yoo@skyworksinc.com>
*
* This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -52,6 +51,8 @@
static const struct regulator_desc sky81452_reg = {
.name = "LOUT",
+ .of_match = of_match_ptr("lout"),
+ .regulators_node = of_match_ptr("regulator"),
.ops = &sky81452_reg_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
@@ -64,30 +65,6 @@
.enable_mask = SKY81452_LEN,
};
-#ifdef CONFIG_OF
-static struct regulator_init_data *sky81452_reg_parse_dt(struct device *dev)
-{
- struct regulator_init_data *init_data;
- struct device_node *np;
-
- np = of_get_child_by_name(dev->parent->of_node, "regulator");
- if (unlikely(!np)) {
- dev_err(dev, "regulator node not found");
- return NULL;
- }
-
- init_data = of_get_regulator_init_data(dev, np);
-
- of_node_put(np);
- return init_data;
-}
-#else
-static struct regulator_init_data *sky81452_reg_parse_dt(struct device *dev)
-{
- return ERR_PTR(-EINVAL);
-}
-#endif
-
static int sky81452_reg_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -95,20 +72,16 @@
struct regulator_config config = { };
struct regulator_dev *rdev;
- if (!init_data) {
- init_data = sky81452_reg_parse_dt(dev);
- if (IS_ERR(init_data))
- return PTR_ERR(init_data);
- }
-
- config.dev = dev;
+ config.dev = dev->parent;
config.init_data = init_data;
config.of_node = dev->of_node;
config.regmap = dev_get_drvdata(dev->parent);
rdev = devm_regulator_register(dev, &sky81452_reg, &config);
- if (IS_ERR(rdev))
+ if (IS_ERR(rdev)) {
+ dev_err(dev, "failed to register. err=%ld\n", PTR_ERR(rdev));
return PTR_ERR(rdev);
+ }
platform_set_drvdata(pdev, rdev);
@@ -126,5 +99,4 @@
MODULE_DESCRIPTION("Skyworks SKY81452 Regulator driver");
MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@skyworksinc.com>");
-MODULE_LICENSE("GPL");
-MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/stw481x-vmmc.c b/drivers/regulator/stw481x-vmmc.c
index a7e1526..b4f1696 100644
--- a/drivers/regulator/stw481x-vmmc.c
+++ b/drivers/regulator/stw481x-vmmc.c
@@ -72,7 +72,8 @@
config.regmap = stw481x->map;
config.of_node = pdev->dev.of_node;
config.init_data = of_get_regulator_init_data(&pdev->dev,
- pdev->dev.of_node);
+ pdev->dev.of_node,
+ &vmmc_regulator);
stw481x->vmmc_regulator = devm_regulator_register(&pdev->dev,
&vmmc_regulator, &config);
diff --git a/drivers/regulator/ti-abb-regulator.c b/drivers/regulator/ti-abb-regulator.c
index a2dabb5..1ef5aba 100644
--- a/drivers/regulator/ti-abb-regulator.c
+++ b/drivers/regulator/ti-abb-regulator.c
@@ -837,7 +837,8 @@
return -EINVAL;
}
- initdata = of_get_regulator_init_data(dev, pdev->dev.of_node);
+ initdata = of_get_regulator_init_data(dev, pdev->dev.of_node,
+ &abb->rdesc);
if (!initdata) {
dev_err(dev, "%s: Unable to alloc regulator init data\n",
__func__);
diff --git a/drivers/regulator/tps51632-regulator.c b/drivers/regulator/tps51632-regulator.c
index f31f22e..c213e37 100644
--- a/drivers/regulator/tps51632-regulator.c
+++ b/drivers/regulator/tps51632-regulator.c
@@ -221,7 +221,8 @@
MODULE_DEVICE_TABLE(of, tps51632_of_match);
static struct tps51632_regulator_platform_data *
- of_get_tps51632_platform_data(struct device *dev)
+ of_get_tps51632_platform_data(struct device *dev,
+ const struct regulator_desc *desc)
{
struct tps51632_regulator_platform_data *pdata;
struct device_node *np = dev->of_node;
@@ -230,7 +231,8 @@
if (!pdata)
return NULL;
- pdata->reg_init_data = of_get_regulator_init_data(dev, dev->of_node);
+ pdata->reg_init_data = of_get_regulator_init_data(dev, dev->of_node,
+ desc);
if (!pdata->reg_init_data) {
dev_err(dev, "Not able to get OF regulator init data\n");
return NULL;
@@ -248,7 +250,8 @@
}
#else
static struct tps51632_regulator_platform_data *
- of_get_tps51632_platform_data(struct device *dev)
+ of_get_tps51632_platform_data(struct device *dev,
+ const struct regulator_desc *desc)
{
return NULL;
}
@@ -273,9 +276,25 @@
}
}
+ tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
+ if (!tps)
+ return -ENOMEM;
+
+ tps->dev = &client->dev;
+ tps->desc.name = client->name;
+ tps->desc.id = 0;
+ tps->desc.ramp_delay = TPS51632_DEFAULT_RAMP_DELAY;
+ tps->desc.min_uV = TPS51632_MIN_VOLTAGE;
+ tps->desc.uV_step = TPS51632_VOLTAGE_STEP_10mV;
+ tps->desc.linear_min_sel = TPS51632_MIN_VSEL;
+ tps->desc.n_voltages = TPS51632_MAX_VSEL + 1;
+ tps->desc.ops = &tps51632_dcdc_ops;
+ tps->desc.type = REGULATOR_VOLTAGE;
+ tps->desc.owner = THIS_MODULE;
+
pdata = dev_get_platdata(&client->dev);
if (!pdata && client->dev.of_node)
- pdata = of_get_tps51632_platform_data(&client->dev);
+ pdata = of_get_tps51632_platform_data(&client->dev, &tps->desc);
if (!pdata) {
dev_err(&client->dev, "No Platform data\n");
return -EINVAL;
@@ -296,22 +315,6 @@
}
}
- tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
- if (!tps)
- return -ENOMEM;
-
- tps->dev = &client->dev;
- tps->desc.name = client->name;
- tps->desc.id = 0;
- tps->desc.ramp_delay = TPS51632_DEFAULT_RAMP_DELAY;
- tps->desc.min_uV = TPS51632_MIN_VOLTAGE;
- tps->desc.uV_step = TPS51632_VOLTAGE_STEP_10mV;
- tps->desc.linear_min_sel = TPS51632_MIN_VSEL;
- tps->desc.n_voltages = TPS51632_MAX_VSEL + 1;
- tps->desc.ops = &tps51632_dcdc_ops;
- tps->desc.type = REGULATOR_VOLTAGE;
- tps->desc.owner = THIS_MODULE;
-
if (pdata->enable_pwm_dvfs)
tps->desc.vsel_reg = TPS51632_VOLTAGE_BASE_REG;
else
diff --git a/drivers/regulator/tps62360-regulator.c b/drivers/regulator/tps62360-regulator.c
index a167204..a1fd626 100644
--- a/drivers/regulator/tps62360-regulator.c
+++ b/drivers/regulator/tps62360-regulator.c
@@ -293,7 +293,8 @@
};
static struct tps62360_regulator_platform_data *
- of_get_tps62360_platform_data(struct device *dev)
+ of_get_tps62360_platform_data(struct device *dev,
+ const struct regulator_desc *desc)
{
struct tps62360_regulator_platform_data *pdata;
struct device_node *np = dev->of_node;
@@ -302,7 +303,8 @@
if (!pdata)
return NULL;
- pdata->reg_init_data = of_get_regulator_init_data(dev, dev->of_node);
+ pdata->reg_init_data = of_get_regulator_init_data(dev, dev->of_node,
+ desc);
if (!pdata->reg_init_data) {
dev_err(dev, "Not able to get OF regulator init data\n");
return NULL;
@@ -350,6 +352,17 @@
pdata = dev_get_platdata(&client->dev);
+ tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
+ if (!tps)
+ return -ENOMEM;
+
+ tps->desc.name = client->name;
+ tps->desc.id = 0;
+ tps->desc.ops = &tps62360_dcdc_ops;
+ tps->desc.type = REGULATOR_VOLTAGE;
+ tps->desc.owner = THIS_MODULE;
+ tps->desc.uV_step = 10000;
+
if (client->dev.of_node) {
const struct of_device_id *match;
match = of_match_device(of_match_ptr(tps62360_of_match),
@@ -360,7 +373,8 @@
}
chip_id = (int)(long)match->data;
if (!pdata)
- pdata = of_get_tps62360_platform_data(&client->dev);
+ pdata = of_get_tps62360_platform_data(&client->dev,
+ &tps->desc);
} else if (id) {
chip_id = id->driver_data;
} else {
@@ -374,10 +388,6 @@
return -EIO;
}
- tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
- if (!tps)
- return -ENOMEM;
-
tps->en_discharge = pdata->en_discharge;
tps->en_internal_pulldn = pdata->en_internal_pulldn;
tps->vsel0_gpio = pdata->vsel0_gpio;
@@ -401,13 +411,6 @@
return -ENODEV;
}
- tps->desc.name = client->name;
- tps->desc.id = 0;
- tps->desc.ops = &tps62360_dcdc_ops;
- tps->desc.type = REGULATOR_VOLTAGE;
- tps->desc.owner = THIS_MODULE;
- tps->desc.uV_step = 10000;
-
tps->regmap = devm_regmap_init_i2c(client, &tps62360_regmap_config);
if (IS_ERR(tps->regmap)) {
ret = PTR_ERR(tps->regmap);
diff --git a/drivers/regulator/tps65090-regulator.c b/drivers/regulator/tps65090-regulator.c
index d5df1e9..f1df442 100644
--- a/drivers/regulator/tps65090-regulator.c
+++ b/drivers/regulator/tps65090-regulator.c
@@ -312,7 +312,11 @@
gpio_flag = GPIOF_OUT_INIT_HIGH;
config->ena_gpio = tps_pdata->gpio;
+ config->ena_gpio_initialized = true;
config->ena_gpio_flags = gpio_flag;
+ } else {
+ config->ena_gpio = -EINVAL;
+ config->ena_gpio_initialized = false;
}
}
diff --git a/drivers/regulator/tps65218-regulator.c b/drivers/regulator/tps65218-regulator.c
index f0a4028..263cc85 100644
--- a/drivers/regulator/tps65218-regulator.c
+++ b/drivers/regulator/tps65218-regulator.c
@@ -231,7 +231,8 @@
template = match->data;
id = template->id;
- init_data = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node);
+ init_data = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node,
+ ®ulators[id]);
platform_set_drvdata(pdev, tps);
diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index 0b4f866..dd727bc 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -1104,7 +1104,8 @@
template = match->data;
id = template->desc.id;
initdata = of_get_regulator_init_data(&pdev->dev,
- pdev->dev.of_node);
+ pdev->dev.of_node,
+ &template->desc);
drvdata = NULL;
} else {
id = pdev->id;
diff --git a/drivers/regulator/vexpress.c b/drivers/regulator/vexpress.c
index 02e7267..5e7c789 100644
--- a/drivers/regulator/vexpress.c
+++ b/drivers/regulator/vexpress.c
@@ -74,7 +74,8 @@
reg->desc.owner = THIS_MODULE;
reg->desc.continuous_voltage_range = true;
- init_data = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node);
+ init_data = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node,
+ ®->desc);
if (!init_data)
return -EINVAL;
diff --git a/drivers/regulator/wm8994-regulator.c b/drivers/regulator/wm8994-regulator.c
index c24346d..88f5064 100644
--- a/drivers/regulator/wm8994-regulator.c
+++ b/drivers/regulator/wm8994-regulator.c
@@ -145,10 +145,12 @@
config.driver_data = ldo;
config.regmap = wm8994->regmap;
config.init_data = &ldo->init_data;
- if (pdata)
+ if (pdata) {
config.ena_gpio = pdata->ldo[id].enable;
- else if (wm8994->dev->of_node)
+ } else if (wm8994->dev->of_node) {
config.ena_gpio = wm8994->pdata.ldo[id].enable;
+ config.ena_gpio_initialized = true;
+ }
/* Use default constraints if none set up */
if (!pdata || !pdata->ldo[id].init_data || wm8994->dev->of_node) {
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 8532c3e..1626dc6 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -161,7 +161,7 @@
static const struct s3c2410_wdt_variant drv_data_exynos7 = {
.disable_reg = EXYNOS5_WDT_DISABLE_REG_OFFSET,
.mask_reset_reg = EXYNOS5_WDT_MASK_RESET_REG_OFFSET,
- .mask_bit = 0,
+ .mask_bit = 23,
.rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET,
.rst_stat_bit = 23, /* A57 WDTRESET */
.quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT,
diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c
index 6df8d3d..b8b92c2 100644
--- a/fs/fat/namei_vfat.c
+++ b/fs/fat/namei_vfat.c
@@ -736,7 +736,12 @@
}
alias = d_find_alias(inode);
- if (alias && !vfat_d_anon_disconn(alias)) {
+ /*
+ * Checking "alias->d_parent == dentry->d_parent" to make sure
+ * FS is not corrupted (especially double linked dir).
+ */
+ if (alias && alias->d_parent == dentry->d_parent &&
+ !vfat_d_anon_disconn(alias)) {
/*
* This inode has non anonymous-DCACHE_DISCONNECTED
* dentry. This means, the user did ->lookup() by an
@@ -755,12 +760,9 @@
out:
mutex_unlock(&MSDOS_SB(sb)->s_lock);
- dentry->d_time = dentry->d_parent->d_inode->i_version;
- dentry = d_splice_alias(inode, dentry);
- if (dentry)
- dentry->d_time = dentry->d_parent->d_inode->i_version;
- return dentry;
-
+ if (!inode)
+ dentry->d_time = dir->i_version;
+ return d_splice_alias(inode, dentry);
error:
mutex_unlock(&MSDOS_SB(sb)->s_lock);
return ERR_PTR(err);
@@ -793,7 +795,6 @@
inode->i_mtime = inode->i_atime = inode->i_ctime = ts;
/* timestamp is already written, so mark_inode_dirty() is unneeded. */
- dentry->d_time = dentry->d_parent->d_inode->i_version;
d_instantiate(dentry, inode);
out:
mutex_unlock(&MSDOS_SB(sb)->s_lock);
@@ -824,6 +825,7 @@
clear_nlink(inode);
inode->i_mtime = inode->i_atime = CURRENT_TIME_SEC;
fat_detach(inode);
+ dentry->d_time = dir->i_version;
out:
mutex_unlock(&MSDOS_SB(sb)->s_lock);
@@ -849,6 +851,7 @@
clear_nlink(inode);
inode->i_mtime = inode->i_atime = CURRENT_TIME_SEC;
fat_detach(inode);
+ dentry->d_time = dir->i_version;
out:
mutex_unlock(&MSDOS_SB(sb)->s_lock);
@@ -889,7 +892,6 @@
inode->i_mtime = inode->i_atime = inode->i_ctime = ts;
/* timestamp is already written, so mark_inode_dirty() is unneeded. */
- dentry->d_time = dentry->d_parent->d_inode->i_version;
d_instantiate(dentry, inode);
mutex_unlock(&MSDOS_SB(sb)->s_lock);
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index e4dc747..1df94fa 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -1853,13 +1853,12 @@
journal->j_chksum_driver = NULL;
return 0;
}
- }
- /* Precompute checksum seed for all metadata */
- if (jbd2_journal_has_csum_v2or3(journal))
+ /* Precompute checksum seed for all metadata */
journal->j_csum_seed = jbd2_chksum(journal, ~0,
sb->s_uuid,
sizeof(sb->s_uuid));
+ }
}
/* If enabling v1 checksums, downgrade superblock */
diff --git a/include/dt-bindings/regulator/maxim,max77802.h b/include/dt-bindings/regulator/maxim,max77802.h
new file mode 100644
index 0000000..cf28631
--- /dev/null
+++ b/include/dt-bindings/regulator/maxim,max77802.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2014 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants for the Maxim 77802 PMIC regulators
+ */
+
+#ifndef _DT_BINDINGS_REGULATOR_MAXIM_MAX77802_H
+#define _DT_BINDINGS_REGULATOR_MAXIM_MAX77802_H
+
+/* Regulator operating modes */
+#define MAX77802_OPMODE_LP 1
+#define MAX77802_OPMODE_NORMAL 3
+
+#endif /* _DT_BINDINGS_REGULATOR_MAXIM_MAX77802_H */
diff --git a/include/linux/atmel-mci.h b/include/linux/atmel-mci.h
index 91b77f8..9177947 100644
--- a/include/linux/atmel-mci.h
+++ b/include/linux/atmel-mci.h
@@ -11,6 +11,7 @@
* @detect_pin: GPIO pin wired to the card detect switch
* @wp_pin: GPIO pin wired to the write protect sensor
* @detect_is_active_high: The state of the detect pin when it is active
+ * @non_removable: The slot is not removable, only detect once
*
* If a given slot is not present on the board, @bus_width should be
* set to 0. The other fields are ignored in this case.
@@ -26,6 +27,7 @@
int detect_pin;
int wp_pin;
bool detect_is_active_high;
+ bool non_removable;
};
/**
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index e1707de..ca6d2ac 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -64,6 +64,7 @@
union map_info *map_context);
typedef void (*dm_presuspend_fn) (struct dm_target *ti);
+typedef void (*dm_presuspend_undo_fn) (struct dm_target *ti);
typedef void (*dm_postsuspend_fn) (struct dm_target *ti);
typedef int (*dm_preresume_fn) (struct dm_target *ti);
typedef void (*dm_resume_fn) (struct dm_target *ti);
@@ -145,6 +146,7 @@
dm_endio_fn end_io;
dm_request_endio_fn rq_end_io;
dm_presuspend_fn presuspend;
+ dm_presuspend_undo_fn presuspend_undo;
dm_postsuspend_fn postsuspend;
dm_preresume_fn preresume;
dm_resume_fn resume;
diff --git a/include/linux/edac.h b/include/linux/edac.h
index e1e68da..da3b72e 100644
--- a/include/linux/edac.h
+++ b/include/linux/edac.h
@@ -194,7 +194,8 @@
* @MEM_DDR3: DDR3 RAM
* @MEM_RDDR3: Registered DDR3 RAM
* This is a variant of the DDR3 memories.
- * @MEM_DDR4: DDR4 RAM
+ * @MEM_LRDDR3 Load-Reduced DDR3 memory.
+ * @MEM_DDR4: Unbuffered DDR4 RAM
* @MEM_RDDR4: Registered DDR4 RAM
* This is a variant of the DDR4 memories.
*/
@@ -216,6 +217,7 @@
MEM_XDR,
MEM_DDR3,
MEM_RDDR3,
+ MEM_LRDDR3,
MEM_DDR4,
MEM_RDDR4,
};
diff --git a/include/linux/i2c/pmbus.h b/include/linux/i2c/pmbus.h
index 69280db..ee3c2ab 100644
--- a/include/linux/i2c/pmbus.h
+++ b/include/linux/i2c/pmbus.h
@@ -40,6 +40,10 @@
struct pmbus_platform_data {
u32 flags; /* Device specific flags */
+
+ /* regulator support */
+ int num_regulators;
+ struct regulator_init_data *reg_init_data;
};
#endif /* _PMBUS_H_ */
diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h
index adba89d..6893127 100644
--- a/include/linux/mfd/abx500/ab8500-sysctrl.h
+++ b/include/linux/mfd/abx500/ab8500-sysctrl.h
@@ -12,7 +12,6 @@
int ab8500_sysctrl_read(u16 reg, u8 *value);
int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value);
-void ab8500_restart(char mode, const char *cmd);
#else
diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h
index c0b075f..aacc10d 100644
--- a/include/linux/mfd/arizona/registers.h
+++ b/include/linux/mfd/arizona/registers.h
@@ -125,6 +125,8 @@
#define ARIZONA_MIC_BIAS_CTRL_1 0x218
#define ARIZONA_MIC_BIAS_CTRL_2 0x219
#define ARIZONA_MIC_BIAS_CTRL_3 0x21A
+#define ARIZONA_HP_CTRL_1L 0x225
+#define ARIZONA_HP_CTRL_1R 0x226
#define ARIZONA_ACCESSORY_DETECT_MODE_1 0x293
#define ARIZONA_HEADPHONE_DETECT_1 0x29B
#define ARIZONA_HEADPHONE_DETECT_2 0x29C
@@ -279,8 +281,16 @@
#define ARIZONA_AIF2_FRAME_CTRL_2 0x548
#define ARIZONA_AIF2_FRAME_CTRL_3 0x549
#define ARIZONA_AIF2_FRAME_CTRL_4 0x54A
+#define ARIZONA_AIF2_FRAME_CTRL_5 0x54B
+#define ARIZONA_AIF2_FRAME_CTRL_6 0x54C
+#define ARIZONA_AIF2_FRAME_CTRL_7 0x54D
+#define ARIZONA_AIF2_FRAME_CTRL_8 0x54E
#define ARIZONA_AIF2_FRAME_CTRL_11 0x551
#define ARIZONA_AIF2_FRAME_CTRL_12 0x552
+#define ARIZONA_AIF2_FRAME_CTRL_13 0x553
+#define ARIZONA_AIF2_FRAME_CTRL_14 0x554
+#define ARIZONA_AIF2_FRAME_CTRL_15 0x555
+#define ARIZONA_AIF2_FRAME_CTRL_16 0x556
#define ARIZONA_AIF2_TX_ENABLES 0x559
#define ARIZONA_AIF2_RX_ENABLES 0x55A
#define ARIZONA_AIF2_FORCE_WRITE 0x55B
@@ -2245,6 +2255,46 @@
#define ARIZONA_MICB3_ENA_WIDTH 1 /* MICB3_ENA */
/*
+ * R549 (0x225) - HP Ctrl 1L
+ */
+#define ARIZONA_RMV_SHRT_HP1L 0x4000 /* RMV_SHRT_HP1L */
+#define ARIZONA_RMV_SHRT_HP1L_MASK 0x4000 /* RMV_SHRT_HP1L */
+#define ARIZONA_RMV_SHRT_HP1L_SHIFT 14 /* RMV_SHRT_HP1L */
+#define ARIZONA_RMV_SHRT_HP1L_WIDTH 1 /* RMV_SHRT_HP1L */
+#define ARIZONA_HP1L_FLWR 0x0004 /* HP1L_FLWR */
+#define ARIZONA_HP1L_FLWR_MASK 0x0004 /* HP1L_FLWR */
+#define ARIZONA_HP1L_FLWR_SHIFT 2 /* HP1L_FLWR */
+#define ARIZONA_HP1L_FLWR_WIDTH 1 /* HP1L_FLWR */
+#define ARIZONA_HP1L_SHRTI 0x0002 /* HP1L_SHRTI */
+#define ARIZONA_HP1L_SHRTI_MASK 0x0002 /* HP1L_SHRTI */
+#define ARIZONA_HP1L_SHRTI_SHIFT 1 /* HP1L_SHRTI */
+#define ARIZONA_HP1L_SHRTI_WIDTH 1 /* HP1L_SHRTI */
+#define ARIZONA_HP1L_SHRTO 0x0001 /* HP1L_SHRTO */
+#define ARIZONA_HP1L_SHRTO_MASK 0x0001 /* HP1L_SHRTO */
+#define ARIZONA_HP1L_SHRTO_SHIFT 0 /* HP1L_SHRTO */
+#define ARIZONA_HP1L_SHRTO_WIDTH 1 /* HP1L_SHRTO */
+
+/*
+ * R550 (0x226) - HP Ctrl 1R
+ */
+#define ARIZONA_RMV_SHRT_HP1R 0x4000 /* RMV_SHRT_HP1R */
+#define ARIZONA_RMV_SHRT_HP1R_MASK 0x4000 /* RMV_SHRT_HP1R */
+#define ARIZONA_RMV_SHRT_HP1R_SHIFT 14 /* RMV_SHRT_HP1R */
+#define ARIZONA_RMV_SHRT_HP1R_WIDTH 1 /* RMV_SHRT_HP1R */
+#define ARIZONA_HP1R_FLWR 0x0004 /* HP1R_FLWR */
+#define ARIZONA_HP1R_FLWR_MASK 0x0004 /* HP1R_FLWR */
+#define ARIZONA_HP1R_FLWR_SHIFT 2 /* HP1R_FLWR */
+#define ARIZONA_HP1R_FLWR_WIDTH 1 /* HP1R_FLWR */
+#define ARIZONA_HP1R_SHRTI 0x0002 /* HP1R_SHRTI */
+#define ARIZONA_HP1R_SHRTI_MASK 0x0002 /* HP1R_SHRTI */
+#define ARIZONA_HP1R_SHRTI_SHIFT 1 /* HP1R_SHRTI */
+#define ARIZONA_HP1R_SHRTI_WIDTH 1 /* HP1R_SHRTI */
+#define ARIZONA_HP1R_SHRTO 0x0001 /* HP1R_SHRTO */
+#define ARIZONA_HP1R_SHRTO_MASK 0x0001 /* HP1R_SHRTO */
+#define ARIZONA_HP1R_SHRTO_SHIFT 0 /* HP1R_SHRTO */
+#define ARIZONA_HP1R_SHRTO_WIDTH 1 /* HP1R_SHRTO */
+
+/*
* R659 (0x293) - Accessory Detect Mode 1
*/
#define ARIZONA_ACCDET_SRC 0x2000 /* ACCDET_SRC */
diff --git a/include/linux/mfd/atmel-hlcdc.h b/include/linux/mfd/atmel-hlcdc.h
new file mode 100644
index 0000000..1279ab1
--- /dev/null
+++ b/include/linux/mfd/atmel-hlcdc.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2014 Free Electrons
+ * Copyright (C) 2014 Atmel
+ *
+ * Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __LINUX_MFD_HLCDC_H
+#define __LINUX_MFD_HLCDC_H
+
+#include <linux/clk.h>
+#include <linux/regmap.h>
+
+#define ATMEL_HLCDC_CFG(i) ((i) * 0x4)
+#define ATMEL_HLCDC_SIG_CFG LCDCFG(5)
+#define ATMEL_HLCDC_HSPOL BIT(0)
+#define ATMEL_HLCDC_VSPOL BIT(1)
+#define ATMEL_HLCDC_VSPDLYS BIT(2)
+#define ATMEL_HLCDC_VSPDLYE BIT(3)
+#define ATMEL_HLCDC_DISPPOL BIT(4)
+#define ATMEL_HLCDC_DITHER BIT(6)
+#define ATMEL_HLCDC_DISPDLY BIT(7)
+#define ATMEL_HLCDC_MODE_MASK GENMASK(9, 8)
+#define ATMEL_HLCDC_PP BIT(10)
+#define ATMEL_HLCDC_VSPSU BIT(12)
+#define ATMEL_HLCDC_VSPHO BIT(13)
+#define ATMEL_HLCDC_GUARDTIME_MASK GENMASK(20, 16)
+
+#define ATMEL_HLCDC_EN 0x20
+#define ATMEL_HLCDC_DIS 0x24
+#define ATMEL_HLCDC_SR 0x28
+#define ATMEL_HLCDC_IER 0x2c
+#define ATMEL_HLCDC_IDR 0x30
+#define ATMEL_HLCDC_IMR 0x34
+#define ATMEL_HLCDC_ISR 0x38
+
+#define ATMEL_HLCDC_CLKPOL BIT(0)
+#define ATMEL_HLCDC_CLKSEL BIT(2)
+#define ATMEL_HLCDC_CLKPWMSEL BIT(3)
+#define ATMEL_HLCDC_CGDIS(i) BIT(8 + (i))
+#define ATMEL_HLCDC_CLKDIV_SHFT 16
+#define ATMEL_HLCDC_CLKDIV_MASK GENMASK(23, 16)
+#define ATMEL_HLCDC_CLKDIV(div) ((div - 2) << ATMEL_HLCDC_CLKDIV_SHFT)
+
+#define ATMEL_HLCDC_PIXEL_CLK BIT(0)
+#define ATMEL_HLCDC_SYNC BIT(1)
+#define ATMEL_HLCDC_DISP BIT(2)
+#define ATMEL_HLCDC_PWM BIT(3)
+#define ATMEL_HLCDC_SIP BIT(4)
+
+#define ATMEL_HLCDC_SOF BIT(0)
+#define ATMEL_HLCDC_SYNCDIS BIT(1)
+#define ATMEL_HLCDC_FIFOERR BIT(4)
+#define ATMEL_HLCDC_LAYER_STATUS(x) BIT((x) + 8)
+
+/**
+ * Structure shared by the MFD device and its subdevices.
+ *
+ * @regmap: register map used to access HLCDC IP registers
+ * @periph_clk: the hlcdc peripheral clock
+ * @sys_clk: the hlcdc system clock
+ * @slow_clk: the system slow clk
+ * @irq: the hlcdc irq
+ */
+struct atmel_hlcdc {
+ struct regmap *regmap;
+ struct clk *periph_clk;
+ struct clk *sys_clk;
+ struct clk *slow_clk;
+ int irq;
+};
+
+#endif /* __LINUX_MFD_HLCDC_H */
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index d0e31a2..81589d1 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -14,6 +14,8 @@
enum {
AXP202_ID = 0,
AXP209_ID,
+ AXP288_ID,
+ NR_AXP20X_VARIANTS,
};
#define AXP20X_DATACACHE(m) (0x04 + (m))
@@ -49,11 +51,13 @@
#define AXP20X_IRQ3_EN 0x42
#define AXP20X_IRQ4_EN 0x43
#define AXP20X_IRQ5_EN 0x44
+#define AXP20X_IRQ6_EN 0x45
#define AXP20X_IRQ1_STATE 0x48
#define AXP20X_IRQ2_STATE 0x49
#define AXP20X_IRQ3_STATE 0x4a
#define AXP20X_IRQ4_STATE 0x4b
#define AXP20X_IRQ5_STATE 0x4c
+#define AXP20X_IRQ6_STATE 0x4d
/* ADC */
#define AXP20X_ACIN_V_ADC_H 0x56
@@ -116,6 +120,15 @@
#define AXP20X_CC_CTRL 0xb8
#define AXP20X_FG_RES 0xb9
+/* AXP288 specific registers */
+#define AXP288_PMIC_ADC_H 0x56
+#define AXP288_PMIC_ADC_L 0x57
+#define AXP288_ADC_TS_PIN_CTRL 0x84
+
+#define AXP288_PMIC_ADC_EN 0x84
+#define AXP288_FG_TUNE5 0xed
+
+
/* Regulators IDs */
enum {
AXP20X_LDO1 = 0,
@@ -169,12 +182,58 @@
AXP20X_IRQ_GPIO0_INPUT,
};
+enum axp288_irqs {
+ AXP288_IRQ_VBUS_FALL = 2,
+ AXP288_IRQ_VBUS_RISE,
+ AXP288_IRQ_OV,
+ AXP288_IRQ_FALLING_ALT,
+ AXP288_IRQ_RISING_ALT,
+ AXP288_IRQ_OV_ALT,
+ AXP288_IRQ_DONE = 10,
+ AXP288_IRQ_CHARGING,
+ AXP288_IRQ_SAFE_QUIT,
+ AXP288_IRQ_SAFE_ENTER,
+ AXP288_IRQ_ABSENT,
+ AXP288_IRQ_APPEND,
+ AXP288_IRQ_QWBTU,
+ AXP288_IRQ_WBTU,
+ AXP288_IRQ_QWBTO,
+ AXP288_IRQ_WBTO,
+ AXP288_IRQ_QCBTU,
+ AXP288_IRQ_CBTU,
+ AXP288_IRQ_QCBTO,
+ AXP288_IRQ_CBTO,
+ AXP288_IRQ_WL2,
+ AXP288_IRQ_WL1,
+ AXP288_IRQ_GPADC,
+ AXP288_IRQ_OT = 31,
+ AXP288_IRQ_GPIO0,
+ AXP288_IRQ_GPIO1,
+ AXP288_IRQ_POKO,
+ AXP288_IRQ_POKL,
+ AXP288_IRQ_POKS,
+ AXP288_IRQ_POKN,
+ AXP288_IRQ_POKP,
+ AXP288_IRQ_TIMER,
+ AXP288_IRQ_MV_CHNG,
+ AXP288_IRQ_BC_USB_CHNG,
+};
+
+#define AXP288_TS_ADC_H 0x58
+#define AXP288_TS_ADC_L 0x59
+#define AXP288_GP_ADC_H 0x5a
+#define AXP288_GP_ADC_L 0x5b
+
struct axp20x_dev {
struct device *dev;
struct i2c_client *i2c_client;
struct regmap *regmap;
struct regmap_irq_chip_data *regmap_irqc;
long variant;
+ int nr_cells;
+ struct mfd_cell *cells;
+ const struct regmap_config *regmap_cfg;
+ const struct regmap_irq_chip *regmap_irq_chip;
};
#endif /* __LINUX_MFD_AXP20X_H */
diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h
index 73e1709..a76bc10 100644
--- a/include/linux/mfd/core.h
+++ b/include/linux/mfd/core.h
@@ -111,6 +111,13 @@
struct resource *mem_base,
int irq_base, struct irq_domain *irq_domain);
+static inline int mfd_add_hotplug_devices(struct device *parent,
+ const struct mfd_cell *cells, int n_devs)
+{
+ return mfd_add_devices(parent, PLATFORM_DEVID_AUTO, cells, n_devs,
+ NULL, 0, NULL);
+}
+
extern void mfd_remove_devices(struct device *parent);
#endif
diff --git a/include/linux/mfd/dln2.h b/include/linux/mfd/dln2.h
new file mode 100644
index 0000000..004b245
--- /dev/null
+++ b/include/linux/mfd/dln2.h
@@ -0,0 +1,103 @@
+#ifndef __LINUX_USB_DLN2_H
+#define __LINUX_USB_DLN2_H
+
+#define DLN2_CMD(cmd, id) ((cmd) | ((id) << 8))
+
+struct dln2_platform_data {
+ u16 handle; /* sub-driver handle (internally used only) */
+ u8 port; /* I2C/SPI port */
+};
+
+/**
+ * dln2_event_cb_t - event callback function signature
+ *
+ * @pdev - the sub-device that registered this callback
+ * @echo - the echo header field received in the message
+ * @data - the data payload
+ * @len - the data payload length
+ *
+ * The callback function is called in interrupt context and the data payload is
+ * only valid during the call. If the user needs later access of the data, it
+ * must copy it.
+ */
+
+typedef void (*dln2_event_cb_t)(struct platform_device *pdev, u16 echo,
+ const void *data, int len);
+
+/**
+ * dl2n_register_event_cb - register a callback function for an event
+ *
+ * @pdev - the sub-device that registers the callback
+ * @event - the event for which to register a callback
+ * @event_cb - the callback function
+ *
+ * @return 0 in case of success, negative value in case of error
+ */
+int dln2_register_event_cb(struct platform_device *pdev, u16 event,
+ dln2_event_cb_t event_cb);
+
+/**
+ * dln2_unregister_event_cb - unregister the callback function for an event
+ *
+ * @pdev - the sub-device that registered the callback
+ * @event - the event for which to register a callback
+ */
+void dln2_unregister_event_cb(struct platform_device *pdev, u16 event);
+
+/**
+ * dln2_transfer - issue a DLN2 command and wait for a response and the
+ * associated data
+ *
+ * @pdev - the sub-device which is issuing this transfer
+ * @cmd - the command to be sent to the device
+ * @obuf - the buffer to be sent to the device; it can be NULL if the user
+ * doesn't need to transmit data with this command
+ * @obuf_len - the size of the buffer to be sent to the device
+ * @ibuf - any data associated with the response will be copied here; it can be
+ * NULL if the user doesn't need the response data
+ * @ibuf_len - must be initialized to the input buffer size; it will be modified
+ * to indicate the actual data transferred;
+ *
+ * @return 0 for success, negative value for errors
+ */
+int dln2_transfer(struct platform_device *pdev, u16 cmd,
+ const void *obuf, unsigned obuf_len,
+ void *ibuf, unsigned *ibuf_len);
+
+/**
+ * dln2_transfer_rx - variant of @dln2_transfer() where TX buffer is not needed
+ *
+ * @pdev - the sub-device which is issuing this transfer
+ * @cmd - the command to be sent to the device
+ * @ibuf - any data associated with the response will be copied here; it can be
+ * NULL if the user doesn't need the response data
+ * @ibuf_len - must be initialized to the input buffer size; it will be modified
+ * to indicate the actual data transferred;
+ *
+ * @return 0 for success, negative value for errors
+ */
+
+static inline int dln2_transfer_rx(struct platform_device *pdev, u16 cmd,
+ void *ibuf, unsigned *ibuf_len)
+{
+ return dln2_transfer(pdev, cmd, NULL, 0, ibuf, ibuf_len);
+}
+
+/**
+ * dln2_transfer_tx - variant of @dln2_transfer() where RX buffer is not needed
+ *
+ * @pdev - the sub-device which is issuing this transfer
+ * @cmd - the command to be sent to the device
+ * @obuf - the buffer to be sent to the device; it can be NULL if the
+ * user doesn't need to transmit data with this command
+ * @obuf_len - the size of the buffer to be sent to the device
+ *
+ * @return 0 for success, negative value for errors
+ */
+static inline int dln2_transfer_tx(struct platform_device *pdev, u16 cmd,
+ const void *obuf, unsigned obuf_len)
+{
+ return dln2_transfer(pdev, cmd, obuf, obuf_len, NULL, NULL);
+}
+
+#endif
diff --git a/include/linux/mfd/max77686.h b/include/linux/mfd/max77686.h
index 7e6dc4b..553f7d0 100644
--- a/include/linux/mfd/max77686.h
+++ b/include/linux/mfd/max77686.h
@@ -131,13 +131,6 @@
MAX77686_OPMODE_STANDBY,
};
-enum max77802_opmode {
- MAX77802_OPMODE_OFF,
- MAX77802_OPMODE_STANDBY,
- MAX77802_OPMODE_LP,
- MAX77802_OPMODE_NORMAL,
-};
-
struct max77686_opmode_data {
int id;
int mode;
diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h
index 582e67f..08dae01 100644
--- a/include/linux/mfd/max77693-private.h
+++ b/include/linux/mfd/max77693-private.h
@@ -26,7 +26,6 @@
#include <linux/i2c.h>
-#define MAX77693_NUM_IRQ_MUIC_REGS 3
#define MAX77693_REG_INVALID (0xff)
/* Slave addr = 0xCC: PMIC, Charger, Flash LED */
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index 74346d5..0c12628 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -558,6 +558,7 @@
#define SD_SAMPLE_POINT_CTL 0xFDA7
#define SD_PUSH_POINT_CTL 0xFDA8
#define SD_CMD0 0xFDA9
+#define SD_CMD_START 0x40
#define SD_CMD1 0xFDAA
#define SD_CMD2 0xFDAB
#define SD_CMD3 0xFDAC
@@ -707,6 +708,14 @@
#define PM_CTRL1 0xFF44
#define PM_CTRL2 0xFF45
#define PM_CTRL3 0xFF46
+#define SDIO_SEND_PME_EN 0x80
+#define FORCE_RC_MODE_ON 0x40
+#define FORCE_RX50_LINK_ON 0x20
+#define D3_DELINK_MODE_EN 0x10
+#define USE_PESRTB_CTL_DELINK 0x08
+#define DELAY_PIN_WAKE 0x04
+#define RESET_PIN_WAKE 0x02
+#define PM_WAKE_EN 0x01
#define PM_CTRL4 0xFF47
/* Memory mapping */
@@ -752,6 +761,14 @@
#define PHY_DUM_REG 0x1F
#define LCTLR 0x80
+#define LCTLR_EXT_SYNC 0x80
+#define LCTLR_COMMON_CLOCK_CFG 0x40
+#define LCTLR_RETRAIN_LINK 0x20
+#define LCTLR_LINK_DISABLE 0x10
+#define LCTLR_RCB 0x08
+#define LCTLR_RESERVED 0x04
+#define LCTLR_ASPM_CTL_MASK 0x03
+
#define PCR_SETTING_REG1 0x724
#define PCR_SETTING_REG2 0x814
#define PCR_SETTING_REG3 0x747
@@ -967,4 +984,24 @@
return (u8 *)(pcr->host_cmds_ptr);
}
+static inline int rtsx_pci_update_cfg_byte(struct rtsx_pcr *pcr, int addr,
+ u8 mask, u8 append)
+{
+ int err;
+ u8 val;
+
+ err = pci_read_config_byte(pcr->pci, addr, &val);
+ if (err < 0)
+ return err;
+ return pci_write_config_byte(pcr->pci, addr, (val & mask) | append);
+}
+
+static inline void rtsx_pci_write_be32(struct rtsx_pcr *pcr, u16 reg, u32 val)
+{
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg, 0xFF, val >> 24);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 1, 0xFF, val >> 16);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 2, 0xFF, val >> 8);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 3, 0xFF, val);
+}
+
#endif
diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
index 1825eda..3fdb7cf 100644
--- a/include/linux/mfd/samsung/core.h
+++ b/include/linux/mfd/samsung/core.h
@@ -28,6 +28,7 @@
#define MIN_800_MV 800000
#define MIN_750_MV 750000
#define MIN_600_MV 600000
+#define MIN_500_MV 500000
/* Macros to represent steps for LDO/BUCK */
#define STEP_50_MV 50000
@@ -41,6 +42,7 @@
S5M8767X,
S2MPA01,
S2MPS11X,
+ S2MPS13X,
S2MPS14X,
S2MPU02,
};
diff --git a/include/linux/mfd/samsung/s2mps13.h b/include/linux/mfd/samsung/s2mps13.h
new file mode 100644
index 0000000..ce5dda8
--- /dev/null
+++ b/include/linux/mfd/samsung/s2mps13.h
@@ -0,0 +1,186 @@
+/*
+ * s2mps13.h
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __LINUX_MFD_S2MPS13_H
+#define __LINUX_MFD_S2MPS13_H
+
+/* S2MPS13 registers */
+enum s2mps13_reg {
+ S2MPS13_REG_ID,
+ S2MPS13_REG_INT1,
+ S2MPS13_REG_INT2,
+ S2MPS13_REG_INT3,
+ S2MPS13_REG_INT1M,
+ S2MPS13_REG_INT2M,
+ S2MPS13_REG_INT3M,
+ S2MPS13_REG_ST1,
+ S2MPS13_REG_ST2,
+ S2MPS13_REG_PWRONSRC,
+ S2MPS13_REG_OFFSRC,
+ S2MPS13_REG_BU_CHG,
+ S2MPS13_REG_RTCCTRL,
+ S2MPS13_REG_CTRL1,
+ S2MPS13_REG_CTRL2,
+ S2MPS13_REG_RSVD1,
+ S2MPS13_REG_RSVD2,
+ S2MPS13_REG_RSVD3,
+ S2MPS13_REG_RSVD4,
+ S2MPS13_REG_RSVD5,
+ S2MPS13_REG_RSVD6,
+ S2MPS13_REG_CTRL3,
+ S2MPS13_REG_RSVD7,
+ S2MPS13_REG_RSVD8,
+ S2MPS13_REG_WRSTBI,
+ S2MPS13_REG_B1CTRL,
+ S2MPS13_REG_B1OUT,
+ S2MPS13_REG_B2CTRL,
+ S2MPS13_REG_B2OUT,
+ S2MPS13_REG_B3CTRL,
+ S2MPS13_REG_B3OUT,
+ S2MPS13_REG_B4CTRL,
+ S2MPS13_REG_B4OUT,
+ S2MPS13_REG_B5CTRL,
+ S2MPS13_REG_B5OUT,
+ S2MPS13_REG_B6CTRL,
+ S2MPS13_REG_B6OUT,
+ S2MPS13_REG_B7CTRL,
+ S2MPS13_REG_B7OUT,
+ S2MPS13_REG_B8CTRL,
+ S2MPS13_REG_B8OUT,
+ S2MPS13_REG_B9CTRL,
+ S2MPS13_REG_B9OUT,
+ S2MPS13_REG_B10CTRL,
+ S2MPS13_REG_B10OUT,
+ S2MPS13_REG_BB1CTRL,
+ S2MPS13_REG_BB1OUT,
+ S2MPS13_REG_BUCK_RAMP1,
+ S2MPS13_REG_BUCK_RAMP2,
+ S2MPS13_REG_LDO_DVS1,
+ S2MPS13_REG_LDO_DVS2,
+ S2MPS13_REG_LDO_DVS3,
+ S2MPS13_REG_B6OUT2,
+ S2MPS13_REG_L1CTRL,
+ S2MPS13_REG_L2CTRL,
+ S2MPS13_REG_L3CTRL,
+ S2MPS13_REG_L4CTRL,
+ S2MPS13_REG_L5CTRL,
+ S2MPS13_REG_L6CTRL,
+ S2MPS13_REG_L7CTRL,
+ S2MPS13_REG_L8CTRL,
+ S2MPS13_REG_L9CTRL,
+ S2MPS13_REG_L10CTRL,
+ S2MPS13_REG_L11CTRL,
+ S2MPS13_REG_L12CTRL,
+ S2MPS13_REG_L13CTRL,
+ S2MPS13_REG_L14CTRL,
+ S2MPS13_REG_L15CTRL,
+ S2MPS13_REG_L16CTRL,
+ S2MPS13_REG_L17CTRL,
+ S2MPS13_REG_L18CTRL,
+ S2MPS13_REG_L19CTRL,
+ S2MPS13_REG_L20CTRL,
+ S2MPS13_REG_L21CTRL,
+ S2MPS13_REG_L22CTRL,
+ S2MPS13_REG_L23CTRL,
+ S2MPS13_REG_L24CTRL,
+ S2MPS13_REG_L25CTRL,
+ S2MPS13_REG_L26CTRL,
+ S2MPS13_REG_L27CTRL,
+ S2MPS13_REG_L28CTRL,
+ S2MPS13_REG_L30CTRL,
+ S2MPS13_REG_L31CTRL,
+ S2MPS13_REG_L32CTRL,
+ S2MPS13_REG_L33CTRL,
+ S2MPS13_REG_L34CTRL,
+ S2MPS13_REG_L35CTRL,
+ S2MPS13_REG_L36CTRL,
+ S2MPS13_REG_L37CTRL,
+ S2MPS13_REG_L38CTRL,
+ S2MPS13_REG_L39CTRL,
+ S2MPS13_REG_L40CTRL,
+ S2MPS13_REG_LDODSCH1,
+ S2MPS13_REG_LDODSCH2,
+ S2MPS13_REG_LDODSCH3,
+ S2MPS13_REG_LDODSCH4,
+ S2MPS13_REG_LDODSCH5,
+};
+
+/* regulator ids */
+enum s2mps13_regulators {
+ S2MPS13_LDO1,
+ S2MPS13_LDO2,
+ S2MPS13_LDO3,
+ S2MPS13_LDO4,
+ S2MPS13_LDO5,
+ S2MPS13_LDO6,
+ S2MPS13_LDO7,
+ S2MPS13_LDO8,
+ S2MPS13_LDO9,
+ S2MPS13_LDO10,
+ S2MPS13_LDO11,
+ S2MPS13_LDO12,
+ S2MPS13_LDO13,
+ S2MPS13_LDO14,
+ S2MPS13_LDO15,
+ S2MPS13_LDO16,
+ S2MPS13_LDO17,
+ S2MPS13_LDO18,
+ S2MPS13_LDO19,
+ S2MPS13_LDO20,
+ S2MPS13_LDO21,
+ S2MPS13_LDO22,
+ S2MPS13_LDO23,
+ S2MPS13_LDO24,
+ S2MPS13_LDO25,
+ S2MPS13_LDO26,
+ S2MPS13_LDO27,
+ S2MPS13_LDO28,
+ S2MPS13_LDO29,
+ S2MPS13_LDO30,
+ S2MPS13_LDO31,
+ S2MPS13_LDO32,
+ S2MPS13_LDO33,
+ S2MPS13_LDO34,
+ S2MPS13_LDO35,
+ S2MPS13_LDO36,
+ S2MPS13_LDO37,
+ S2MPS13_LDO38,
+ S2MPS13_LDO39,
+ S2MPS13_LDO40,
+ S2MPS13_BUCK1,
+ S2MPS13_BUCK2,
+ S2MPS13_BUCK3,
+ S2MPS13_BUCK4,
+ S2MPS13_BUCK5,
+ S2MPS13_BUCK6,
+ S2MPS13_BUCK7,
+ S2MPS13_BUCK8,
+ S2MPS13_BUCK9,
+ S2MPS13_BUCK10,
+
+ S2MPS13_REGULATOR_MAX,
+};
+
+/*
+ * Default ramp delay in uv/us. Datasheet says that ramp delay can be
+ * controlled however it does not specify which register is used for that.
+ * Let's assume that default value will be set.
+ */
+#define S2MPS13_BUCK_RAMP_DELAY 12500
+
+#endif /* __LINUX_MFD_S2MPS13_H */
diff --git a/include/linux/mfd/tc3589x.h b/include/linux/mfd/tc3589x.h
index e6088c2..e1c12d8 100644
--- a/include/linux/mfd/tc3589x.h
+++ b/include/linux/mfd/tc3589x.h
@@ -164,13 +164,10 @@
/**
* struct tc3589x_gpio_platform_data - TC3589x GPIO platform data
- * @gpio_base: first gpio number assigned to TC3589x. A maximum of
- * %TC3589x_NR_GPIOS GPIOs will be allocated.
* @setup: callback for board-specific initialization
* @remove: callback for board-specific teardown
*/
struct tc3589x_gpio_platform_data {
- int gpio_base;
void (*setup)(struct tc3589x *tc3589x, unsigned gpio_base);
void (*remove)(struct tc3589x *tc3589x, unsigned gpio_base);
};
@@ -178,18 +175,13 @@
/**
* struct tc3589x_platform_data - TC3589x platform data
* @block: bitmask of blocks to enable (use TC3589x_BLOCK_*)
- * @irq_base: base IRQ number. %TC3589x_NR_IRQS irqs will be used.
* @gpio: GPIO-specific platform data
* @keypad: keypad-specific platform data
*/
struct tc3589x_platform_data {
unsigned int block;
- int irq_base;
struct tc3589x_gpio_platform_data *gpio;
const struct tc3589x_keypad_platform_data *keypad;
};
-#define TC3589x_NR_GPIOS 24
-#define TC3589x_NR_IRQS TC3589x_INT_GPIO(TC3589x_NR_GPIOS)
-
#endif
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index b0692d2..4d69c00 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -88,6 +88,9 @@
unsigned int data_tag_unit_size; /* DATA TAG UNIT size */
unsigned int boot_ro_lock; /* ro lock support */
bool boot_ro_lockable;
+ bool ffu_capable; /* Firmware upgrade support */
+#define MMC_FIRMWARE_LEN 8
+ u8 fwrev[MMC_FIRMWARE_LEN]; /* FW version */
u8 raw_exception_status; /* 54 */
u8 raw_partition_support; /* 160 */
u8 raw_rpmb_size_mult; /* 168 */
@@ -509,24 +512,8 @@
#define mmc_dev_to_card(d) container_of(d, struct mmc_card, dev)
-#define mmc_list_to_card(l) container_of(l, struct mmc_card, node)
-#define mmc_get_drvdata(c) dev_get_drvdata(&(c)->dev)
-#define mmc_set_drvdata(c,d) dev_set_drvdata(&(c)->dev, d)
-
-/*
- * MMC device driver (e.g., Flash card, I/O card...)
- */
-struct mmc_driver {
- struct device_driver drv;
- int (*probe)(struct mmc_card *);
- void (*remove)(struct mmc_card *);
- int (*suspend)(struct mmc_card *);
- int (*resume)(struct mmc_card *);
- void (*shutdown)(struct mmc_card *);
-};
-
-extern int mmc_register_driver(struct mmc_driver *);
-extern void mmc_unregister_driver(struct mmc_driver *);
+extern int mmc_register_driver(struct device_driver *);
+extern void mmc_unregister_driver(struct device_driver *);
extern void mmc_fixup_device(struct mmc_card *card,
const struct mmc_fixup *table);
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index f206e29..cb2b040 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -154,7 +154,8 @@
extern int __mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int, bool,
bool, bool);
extern int mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int);
-extern int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd);
+extern int mmc_send_tuning(struct mmc_host *host);
+extern int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd);
#define MMC_ERASE_ARG 0x00000000
#define MMC_SECURE_ERASE_ARG 0x80000000
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index 0013669..42b724e 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -54,6 +54,7 @@
* transfer is in progress.
* @use_dma: Whether DMA channel is initialized or not.
* @using_dma: Whether DMA is in use for the current transfer.
+ * @dma_64bit_address: Whether DMA supports 64-bit address mode or not.
* @sg_dma: Bus address of DMA buffer.
* @sg_cpu: Virtual address of DMA buffer.
* @dma_ops: Pointer to platform-specific DMA callbacks.
@@ -96,6 +97,7 @@
* @quirks: Set of quirks that apply to specific versions of the IP.
* @irq_flags: The flags to be passed to request_irq.
* @irq: The irq value to be passed to request_irq.
+ * @sdio_id0: Number of slot0 in the SDIO interrupt registers.
*
* Locking
* =======
@@ -135,11 +137,11 @@
struct mmc_command stop_abort;
unsigned int prev_blksz;
unsigned char timing;
- struct workqueue_struct *card_workqueue;
/* DMA interface members*/
int use_dma;
int using_dma;
+ int dma_64bit_address;
dma_addr_t sg_dma;
void *sg_cpu;
@@ -154,7 +156,6 @@
u32 stop_cmdr;
u32 dir_status;
struct tasklet_struct tasklet;
- struct work_struct card_work;
unsigned long pending_events;
unsigned long completed_events;
enum dw_mci_state state;
@@ -193,6 +194,8 @@
bool vqmmc_enabled;
unsigned long irq_flags; /* IRQ flags */
int irq;
+
+ int sdio_id0;
};
/* DMA ops for Internal/External DMAC interface */
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index df0c153..9f32270 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -289,6 +289,7 @@
#define MMC_CAP2_HS400_1_2V (1 << 16) /* Can support HS400 1.2V */
#define MMC_CAP2_HS400 (MMC_CAP2_HS400_1_8V | \
MMC_CAP2_HS400_1_2V)
+#define MMC_CAP2_HSX00_1_2V (MMC_CAP2_HS200_1_2V_SDR | MMC_CAP2_HS400_1_2V)
#define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17)
mmc_pm_flag_t pm_caps; /* supported pm features */
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 1cd00b3..49ad7a9 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -296,6 +296,7 @@
#define EXT_CSD_SANITIZE_START 165 /* W */
#define EXT_CSD_WR_REL_PARAM 166 /* RO */
#define EXT_CSD_RPMB_MULT 168 /* RO */
+#define EXT_CSD_FW_CONFIG 169 /* R/W */
#define EXT_CSD_BOOT_WP 173 /* R/W */
#define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */
#define EXT_CSD_PART_CONFIG 179 /* R/W */
@@ -332,6 +333,8 @@
#define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */
#define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */
#define EXT_CSD_PWR_CL_DDR_200_360 253 /* RO */
+#define EXT_CSD_FIRMWARE_VERSION 254 /* RO, 8 bytes */
+#define EXT_CSD_SUPPORTED_MODE 493 /* RO */
#define EXT_CSD_TAG_UNIT_SIZE 498 /* RO */
#define EXT_CSD_DATA_TAG_SUPPORT 499 /* RO */
#define EXT_CSD_MAX_PACKED_WRITES 500 /* RO */
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index dba793e..375af80 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -100,6 +100,12 @@
#define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7)
/* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */
#define SDHCI_QUIRK2_STOP_WITH_TC (1<<8)
+/* Controller does not support 64-bit DMA */
+#define SDHCI_QUIRK2_BROKEN_64_BIT_DMA (1<<9)
+/* need clear transfer mode register before send cmd */
+#define SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD (1<<10)
+/* Capability register bit-63 indicates HS400 support */
+#define SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 (1<<11)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
@@ -130,6 +136,7 @@
#define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */
#define SDHCI_SDR104_NEEDS_TUNING (1<<10) /* SDR104/HS200 needs tuning */
#define SDHCI_USING_RETUNING_TIMER (1<<11) /* Host is using a retuning timer for the card */
+#define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */
unsigned int version; /* SDHCI spec. version */
@@ -155,12 +162,19 @@
int sg_count; /* Mapped sg entries */
- u8 *adma_desc; /* ADMA descriptor table */
- u8 *align_buffer; /* Bounce buffer */
+ void *adma_table; /* ADMA descriptor table */
+ void *align_buffer; /* Bounce buffer */
+
+ size_t adma_table_sz; /* ADMA descriptor table size */
+ size_t align_buffer_sz; /* Bounce buffer size */
dma_addr_t adma_addr; /* Mapped ADMA descr. table */
dma_addr_t align_addr; /* Mapped bounce buffer */
+ unsigned int desc_sz; /* ADMA descriptor size */
+ unsigned int align_sz; /* ADMA alignment */
+ unsigned int align_mask; /* ADMA alignment mask */
+
struct tasklet_struct finish_tasklet; /* Tasklet structures */
struct timer_list timer; /* Timer for timeouts */
diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h
index 50f0bc9..aab032a 100644
--- a/include/linux/mmc/sdio_func.h
+++ b/include/linux/mmc/sdio_func.h
@@ -84,8 +84,6 @@
struct device_driver drv;
};
-#define to_sdio_driver(d) container_of(d, struct sdio_driver, drv)
-
/**
* SDIO_DEVICE - macro used to describe a specific SDIO device
* @vend: the 16 bit manufacturer code
diff --git a/include/linux/of.h b/include/linux/of.h
index 29f0adc..c55b500 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -922,4 +922,15 @@
/* CONFIG_OF_RESOLVE api */
extern int of_resolve_phandles(struct device_node *tree);
+/**
+ * of_device_is_system_power_controller - Tells if system-power-controller is found for device_node
+ * @np: Pointer to the given device_node
+ *
+ * return true if present false otherwise
+ */
+static inline bool of_device_is_system_power_controller(const struct device_node *np)
+{
+ return of_property_read_bool(np, "system-power-controller");
+}
+
#endif /* _LINUX_OF_H */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 1fa99a3..97fb9f6 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -522,6 +522,8 @@
#define PCI_DEVICE_ID_AMD_15H_M10H_F3 0x1403
#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F3 0x141d
#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F4 0x141e
+#define PCI_DEVICE_ID_AMD_15H_M60H_NB_F3 0x1573
+#define PCI_DEVICE_ID_AMD_15H_M60H_NB_F4 0x1574
#define PCI_DEVICE_ID_AMD_15H_NB_F0 0x1600
#define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601
#define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602
diff --git a/include/linux/platform_data/hsmmc-omap.h b/include/linux/platform_data/hsmmc-omap.h
new file mode 100644
index 0000000..67bbcf0
--- /dev/null
+++ b/include/linux/platform_data/hsmmc-omap.h
@@ -0,0 +1,90 @@
+/*
+ * MMC definitions for OMAP2
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * struct omap_hsmmc_dev_attr.flags possibilities
+ *
+ * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can
+ * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag
+ * should be set if this is the case. See for example Section 22.5.3
+ * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia
+ * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R).
+ *
+ * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers
+ * don't work correctly on some MMC controller instances on some
+ * OMAP3 SoCs; this flag should be set if this is the case. See
+ * for example Advisory 2.1.1.128 "MMC: Multiple Block Read
+ * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_
+ * Revision F (October 2010) (SPRZ278F).
+ */
+#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0)
+#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1)
+#define OMAP_HSMMC_SWAKEUP_MISSING BIT(2)
+
+struct omap_hsmmc_dev_attr {
+ u8 flags;
+};
+
+struct mmc_card;
+
+struct omap_hsmmc_platform_data {
+ /* back-link to device */
+ struct device *dev;
+
+ /* set if your board has components or wiring that limits the
+ * maximum frequency on the MMC bus */
+ unsigned int max_freq;
+
+ /* Integrating attributes from the omap_hwmod layer */
+ u8 controller_flags;
+
+ /* Register offset deviation */
+ u16 reg_offset;
+
+ /*
+ * 4/8 wires and any additional host capabilities
+ * need to OR'd all capabilities (ref. linux/mmc/host.h)
+ */
+ u32 caps; /* Used for the MMC driver on 2430 and later */
+ u32 pm_caps; /* PM capabilities of the mmc */
+
+ /* switch pin can be for card detect (default) or card cover */
+ unsigned cover:1;
+
+ /* use the internal clock */
+ unsigned internal_clock:1;
+
+ /* nonremovable e.g. eMMC */
+ unsigned nonremovable:1;
+
+ /* eMMC does not handle power off when not in sleep state */
+ unsigned no_regulator_off_init:1;
+
+ /* we can put the features above into this variable */
+#define HSMMC_HAS_PBIAS (1 << 0)
+#define HSMMC_HAS_UPDATED_RESET (1 << 1)
+#define HSMMC_HAS_HSPE_SUPPORT (1 << 2)
+ unsigned features;
+
+ int switch_pin; /* gpio (card detect) */
+ int gpio_wp; /* gpio (write protect) */
+
+ int (*set_power)(struct device *dev, int power_on, int vdd);
+ void (*remux)(struct device *dev, int power_on);
+ /* Call back before enabling / disabling regulators */
+ void (*before_set_reg)(struct device *dev, int power_on, int vdd);
+ /* Call back after enabling / disabling regulators */
+ void (*after_set_reg)(struct device *dev, int power_on, int vdd);
+ /* if we have special card, init it using this callback */
+ void (*init_card)(struct mmc_card *card);
+
+ const char *name;
+ u32 ocr_mask;
+};
diff --git a/include/linux/platform_data/mmc-atmel-mci.h b/include/linux/platform_data/mmc-atmel-mci.h
new file mode 100644
index 0000000..399a2d5
--- /dev/null
+++ b/include/linux/platform_data/mmc-atmel-mci.h
@@ -0,0 +1,22 @@
+#ifndef __MMC_ATMEL_MCI_H
+#define __MMC_ATMEL_MCI_H
+
+#include <linux/platform_data/dma-atmel.h>
+#include <linux/platform_data/dma-dw.h>
+
+/**
+ * struct mci_dma_data - DMA data for MCI interface
+ */
+struct mci_dma_data {
+#ifdef CONFIG_ARM
+ struct at_dma_slave sdata;
+#else
+ struct dw_dma_slave sdata;
+#endif
+};
+
+/* accessor macros */
+#define slave_data_ptr(s) (&(s)->sdata)
+#define find_slave_dev(s) ((s)->sdata.dma_dev)
+
+#endif /* __MMC_ATMEL_MCI_H */
diff --git a/include/linux/platform_data/mmc-omap.h b/include/linux/platform_data/mmc-omap.h
index 51e70cf..5c188f4 100644
--- a/include/linux/platform_data/mmc-omap.h
+++ b/include/linux/platform_data/mmc-omap.h
@@ -10,32 +10,8 @@
#define OMAP_MMC_MAX_SLOTS 2
-/*
- * struct omap_mmc_dev_attr.flags possibilities
- *
- * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can
- * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag
- * should be set if this is the case. See for example Section 22.5.3
- * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia
- * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R).
- *
- * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers
- * don't work correctly on some MMC controller instances on some
- * OMAP3 SoCs; this flag should be set if this is the case. See
- * for example Advisory 2.1.1.128 "MMC: Multiple Block Read
- * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_
- * Revision F (October 2010) (SPRZ278F).
- */
-#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0)
-#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1)
-#define OMAP_HSMMC_SWAKEUP_MISSING BIT(2)
-
struct mmc_card;
-struct omap_mmc_dev_attr {
- u8 flags;
-};
-
struct omap_mmc_platform_data {
/* back-link to device */
struct device *dev;
@@ -106,9 +82,6 @@
unsigned vcc_aux_disable_is_sleep:1;
/* we can put the features above into this variable */
-#define HSMMC_HAS_PBIAS (1 << 0)
-#define HSMMC_HAS_UPDATED_RESET (1 << 1)
-#define HSMMC_HAS_HSPE_SUPPORT (1 << 2)
#define MMC_OMAP7XX (1 << 3)
#define MMC_OMAP15XX (1 << 4)
#define MMC_OMAP16XX (1 << 5)
diff --git a/include/linux/platform_data/pxa_sdhci.h b/include/linux/platform_data/pxa_sdhci.h
index 27d3156..9e20c2f 100644
--- a/include/linux/platform_data/pxa_sdhci.h
+++ b/include/linux/platform_data/pxa_sdhci.h
@@ -55,9 +55,4 @@
unsigned int quirks2;
unsigned int pm_caps;
};
-
-struct sdhci_pxa {
- u8 clk_enable;
- u8 power_mode;
-};
#endif /* _PXA_SDHCI_H_ */
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index c5ed83f..4419b99 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -27,6 +27,7 @@
struct regmap;
struct regmap_range_cfg;
struct regmap_field;
+struct snd_ac97;
/* An enum of all the supported cache types */
enum regcache_type {
@@ -340,6 +341,8 @@
struct regmap *regmap_init_mmio_clk(struct device *dev, const char *clk_id,
void __iomem *regs,
const struct regmap_config *config);
+struct regmap *regmap_init_ac97(struct snd_ac97 *ac97,
+ const struct regmap_config *config);
struct regmap *devm_regmap_init(struct device *dev,
const struct regmap_bus *bus,
@@ -356,6 +359,10 @@
struct regmap *devm_regmap_init_mmio_clk(struct device *dev, const char *clk_id,
void __iomem *regs,
const struct regmap_config *config);
+struct regmap *devm_regmap_init_ac97(struct snd_ac97 *ac97,
+ const struct regmap_config *config);
+
+bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg);
/**
* regmap_init_mmio(): Initialise register map
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index f540b14..d17e1ff 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -101,6 +101,8 @@
* Data passed is "struct pre_voltage_change_data"
* ABORT_VOLTAGE_CHANGE Regulator voltage change failed for some reason.
* Data passed is old voltage cast to (void *).
+ * PRE_DISABLE Regulator is about to be disabled
+ * ABORT_DISABLE Regulator disable failed for some reason
*
* NOTE: These events can be OR'ed together when passed into handler.
*/
@@ -115,6 +117,8 @@
#define REGULATOR_EVENT_DISABLE 0x80
#define REGULATOR_EVENT_PRE_VOLTAGE_CHANGE 0x100
#define REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE 0x200
+#define REGULATOR_EVENT_PRE_DISABLE 0x400
+#define REGULATOR_EVENT_ABORT_DISABLE 0x800
/**
* struct pre_voltage_change_data - Data sent with PRE_VOLTAGE_CHANGE event
@@ -284,7 +288,7 @@
static inline struct regulator *__must_check
regulator_get_exclusive(struct device *dev, const char *id)
{
- return NULL;
+ return ERR_PTR(-ENODEV);
}
static inline struct regulator *__must_check
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index fc0ee0c..5f1e9ca 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -243,6 +243,8 @@
*
* @enable_time: Time taken for initial enable of regulator (in uS).
* @off_on_delay: guard time (in uS), before re-enabling a regulator
+ *
+ * @of_map_mode: Maps a hardware mode defined in a DeviceTree to a standard mode
*/
struct regulator_desc {
const char *name;
@@ -285,6 +287,8 @@
unsigned int enable_time;
unsigned int off_on_delay;
+
+ unsigned int (*of_map_mode)(unsigned int mode);
};
/**
@@ -301,6 +305,9 @@
* NULL).
* @regmap: regmap to use for core regmap helpers if dev_get_regulator() is
* insufficient.
+ * @ena_gpio_initialized: GPIO controlling regulator enable was properly
+ * initialized, meaning that >= 0 is a valid gpio
+ * identifier and < 0 is a non existent gpio.
* @ena_gpio: GPIO controlling regulator enable.
* @ena_gpio_invert: Sense for GPIO enable control.
* @ena_gpio_flags: Flags to use when calling gpio_request_one()
@@ -312,6 +319,7 @@
struct device_node *of_node;
struct regmap *regmap;
+ bool ena_gpio_initialized;
int ena_gpio;
unsigned int ena_gpio_invert:1;
unsigned int ena_gpio_flags;
diff --git a/include/linux/regulator/of_regulator.h b/include/linux/regulator/of_regulator.h
index f921796..763953f 100644
--- a/include/linux/regulator/of_regulator.h
+++ b/include/linux/regulator/of_regulator.h
@@ -6,24 +6,29 @@
#ifndef __LINUX_OF_REG_H
#define __LINUX_OF_REG_H
+struct regulator_desc;
+
struct of_regulator_match {
const char *name;
void *driver_data;
struct regulator_init_data *init_data;
struct device_node *of_node;
+ const struct regulator_desc *desc;
};
#if defined(CONFIG_OF)
extern struct regulator_init_data
*of_get_regulator_init_data(struct device *dev,
- struct device_node *node);
+ struct device_node *node,
+ const struct regulator_desc *desc);
extern int of_regulator_match(struct device *dev, struct device_node *node,
struct of_regulator_match *matches,
unsigned int num_matches);
#else
static inline struct regulator_init_data
*of_get_regulator_init_data(struct device *dev,
- struct device_node *node)
+ struct device_node *node,
+ const struct regulator_desc *desc)
{
return NULL;
}
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index 4c94f31..8523f9b 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -427,7 +427,7 @@
header-y += virtio_pci.h
header-y += virtio_ring.h
header-y += virtio_rng.h
-header=y += vm_sockets.h
+header-y += vm_sockets.h
header-y += vt.h
header-y += wait.h
header-y += wanrouter.h
diff --git a/include/uapi/linux/dm-ioctl.h b/include/uapi/linux/dm-ioctl.h
index 3315ab2..a570d7b 100644
--- a/include/uapi/linux/dm-ioctl.h
+++ b/include/uapi/linux/dm-ioctl.h
@@ -267,9 +267,9 @@
#define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl)
#define DM_VERSION_MAJOR 4
-#define DM_VERSION_MINOR 28
+#define DM_VERSION_MINOR 29
#define DM_VERSION_PATCHLEVEL 0
-#define DM_VERSION_EXTRA "-ioctl (2014-09-17)"
+#define DM_VERSION_EXTRA "-ioctl (2014-10-28)"
/* Status bits */
#define DM_READONLY_FLAG (1 << 0) /* In/Out */
@@ -352,4 +352,9 @@
*/
#define DM_DEFERRED_REMOVE (1 << 17) /* In/Out */
+/*
+ * If set, the device is suspended internally.
+ */
+#define DM_INTERNAL_SUSPEND_FLAG (1 << 18) /* Out */
+
#endif /* _LINUX_DM_IOCTL_H */
diff --git a/ipc/sem.c b/ipc/sem.c
index 454f6c6..53c3310 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -507,13 +507,6 @@
return retval;
}
- id = ipc_addid(&sem_ids(ns), &sma->sem_perm, ns->sc_semmni);
- if (id < 0) {
- ipc_rcu_putref(sma, sem_rcu_free);
- return id;
- }
- ns->used_sems += nsems;
-
sma->sem_base = (struct sem *) &sma[1];
for (i = 0; i < nsems; i++) {
@@ -528,6 +521,14 @@
INIT_LIST_HEAD(&sma->list_id);
sma->sem_nsems = nsems;
sma->sem_ctime = get_seconds();
+
+ id = ipc_addid(&sem_ids(ns), &sma->sem_perm, ns->sc_semmni);
+ if (id < 0) {
+ ipc_rcu_putref(sma, sem_rcu_free);
+ return id;
+ }
+ ns->used_sems += nsems;
+
sem_unlock(sma, -1);
rcu_read_unlock();
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 24beb9b..89e7283 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -2874,10 +2874,14 @@
* or we have been woken up remotely but the IPI has not yet arrived,
* we haven't yet exited the RCU idle mode. Do it here manually until
* we find a better solution.
+ *
+ * NB: There are buggy callers of this function. Ideally we
+ * should warn if prev_state != IN_USER, but that will trigger
+ * too frequently to make sense yet.
*/
- user_exit();
+ enum ctx_state prev_state = exception_enter();
schedule();
- user_enter();
+ exception_exit(prev_state);
}
#endif
diff --git a/lib/genalloc.c b/lib/genalloc.c
index cce4dd6..2e65d20 100644
--- a/lib/genalloc.c
+++ b/lib/genalloc.c
@@ -598,6 +598,7 @@
return pool;
}
+EXPORT_SYMBOL(devm_gen_pool_create);
/**
* dev_get_gen_pool - Obtain the gen_pool (if any) for a device
diff --git a/lib/show_mem.c b/lib/show_mem.c
index 0922579..5e25627 100644
--- a/lib/show_mem.c
+++ b/lib/show_mem.c
@@ -28,7 +28,7 @@
continue;
total += zone->present_pages;
- reserved = zone->present_pages - zone->managed_pages;
+ reserved += zone->present_pages - zone->managed_pages;
if (is_highmem_idx(zoneid))
highmem += zone->present_pages;
diff --git a/mm/frontswap.c b/mm/frontswap.c
index c30eec5..f2a3571 100644
--- a/mm/frontswap.c
+++ b/mm/frontswap.c
@@ -244,8 +244,10 @@
the (older) page from frontswap
*/
inc_frontswap_failed_stores();
- if (dup)
+ if (dup) {
__frontswap_clear(sis, offset);
+ frontswap_ops->invalidate_page(type, offset);
+ }
}
if (frontswap_writethrough_enabled)
/* report failure so swap also writes to swap device */
diff --git a/mm/memory.c b/mm/memory.c
index 3e50383..d5f2ae9 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -815,20 +815,20 @@
if (!pte_file(pte)) {
swp_entry_t entry = pte_to_swp_entry(pte);
- if (swap_duplicate(entry) < 0)
- return entry.val;
+ if (likely(!non_swap_entry(entry))) {
+ if (swap_duplicate(entry) < 0)
+ return entry.val;
- /* make sure dst_mm is on swapoff's mmlist. */
- if (unlikely(list_empty(&dst_mm->mmlist))) {
- spin_lock(&mmlist_lock);
- if (list_empty(&dst_mm->mmlist))
- list_add(&dst_mm->mmlist,
- &src_mm->mmlist);
- spin_unlock(&mmlist_lock);
- }
- if (likely(!non_swap_entry(entry)))
+ /* make sure dst_mm is on swapoff's mmlist. */
+ if (unlikely(list_empty(&dst_mm->mmlist))) {
+ spin_lock(&mmlist_lock);
+ if (list_empty(&dst_mm->mmlist))
+ list_add(&dst_mm->mmlist,
+ &src_mm->mmlist);
+ spin_unlock(&mmlist_lock);
+ }
rss[MM_SWAPENTS]++;
- else if (is_migration_entry(entry)) {
+ } else if (is_migration_entry(entry)) {
page = migration_entry_to_page(entry);
if (PageAnon(page))
diff --git a/mm/mmap.c b/mm/mmap.c
index 87e82b3..ae91989 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -776,8 +776,11 @@
* shrinking vma had, to cover any anon pages imported.
*/
if (exporter && exporter->anon_vma && !importer->anon_vma) {
- if (anon_vma_clone(importer, exporter))
- return -ENOMEM;
+ int error;
+
+ error = anon_vma_clone(importer, exporter);
+ if (error)
+ return error;
importer->anon_vma = exporter->anon_vma;
}
}
@@ -2469,7 +2472,8 @@
if (err)
goto out_free_vma;
- if (anon_vma_clone(new, vma))
+ err = anon_vma_clone(new, vma);
+ if (err)
goto out_free_mpol;
if (new->vm_file)
diff --git a/mm/rmap.c b/mm/rmap.c
index 19886fb..3e4c721 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -274,6 +274,7 @@
{
struct anon_vma_chain *avc;
struct anon_vma *anon_vma;
+ int error;
/* Don't bother if the parent process has no anon_vma here. */
if (!pvma->anon_vma)
@@ -283,8 +284,9 @@
* First, attach the new VMA to the parent VMA's anon_vmas,
* so rmap can find non-COWed pages in child processes.
*/
- if (anon_vma_clone(vma, pvma))
- return -ENOMEM;
+ error = anon_vma_clone(vma, pvma);
+ if (error)
+ return error;
/* Then add our own anon_vma. */
anon_vma = anon_vma_alloc();
diff --git a/mm/slab.c b/mm/slab.c
index eb2b2ea..f34e053 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -3076,7 +3076,7 @@
void *obj;
int x;
- VM_BUG_ON(nodeid > num_online_nodes());
+ VM_BUG_ON(nodeid < 0 || nodeid >= MAX_NUMNODES);
n = get_node(cachep, nodeid);
BUG_ON(!n);
diff --git a/mm/vmpressure.c b/mm/vmpressure.c
index d4042e7..c5afd57 100644
--- a/mm/vmpressure.c
+++ b/mm/vmpressure.c
@@ -165,6 +165,7 @@
unsigned long scanned;
unsigned long reclaimed;
+ spin_lock(&vmpr->sr_lock);
/*
* Several contexts might be calling vmpressure(), so it is
* possible that the work was rescheduled again before the old
@@ -173,11 +174,12 @@
* here. No need for any locks here since we don't care if
* vmpr->reclaimed is in sync.
*/
- if (!vmpr->scanned)
- return;
-
- spin_lock(&vmpr->sr_lock);
scanned = vmpr->scanned;
+ if (!scanned) {
+ spin_unlock(&vmpr->sr_lock);
+ return;
+ }
+
reclaimed = vmpr->reclaimed;
vmpr->scanned = 0;
vmpr->reclaimed = 0;
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index b9b7dfa..76321ea 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -1498,6 +1498,7 @@
goto errout;
}
if (!netlink_ns_capable(skb, net->user_ns, CAP_NET_ADMIN)) {
+ put_net(net);
err = -EPERM;
goto errout;
}
diff --git a/security/keys/internal.h b/security/keys/internal.h
index b8960c4..200e378 100644
--- a/security/keys/internal.h
+++ b/security/keys/internal.h
@@ -117,6 +117,7 @@
#define KEYRING_SEARCH_NO_UPDATE_TIME 0x0004 /* Don't update times */
#define KEYRING_SEARCH_NO_CHECK_PERM 0x0008 /* Don't check permissions */
#define KEYRING_SEARCH_DETECT_TOO_DEEP 0x0010 /* Give an error on excessive depth */
+#define KEYRING_SEARCH_SKIP_EXPIRED 0x0020 /* Ignore expired keys (intention to replace) */
int (*iterator)(const void *object, void *iterator_data);
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index eff88a5..4743d71 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -26,6 +26,8 @@
#include <asm/uaccess.h>
#include "internal.h"
+#define KEY_MAX_DESC_SIZE 4096
+
static int key_get_type_from_user(char *type,
const char __user *_type,
unsigned len)
@@ -78,7 +80,7 @@
description = NULL;
if (_description) {
- description = strndup_user(_description, PAGE_SIZE);
+ description = strndup_user(_description, KEY_MAX_DESC_SIZE);
if (IS_ERR(description)) {
ret = PTR_ERR(description);
goto error;
@@ -177,7 +179,7 @@
goto error;
/* pull the description into kernel space */
- description = strndup_user(_description, PAGE_SIZE);
+ description = strndup_user(_description, KEY_MAX_DESC_SIZE);
if (IS_ERR(description)) {
ret = PTR_ERR(description);
goto error;
@@ -287,7 +289,7 @@
/* fetch the name from userspace */
name = NULL;
if (_name) {
- name = strndup_user(_name, PAGE_SIZE);
+ name = strndup_user(_name, KEY_MAX_DESC_SIZE);
if (IS_ERR(name)) {
ret = PTR_ERR(name);
goto error;
@@ -562,8 +564,9 @@
{
struct key *key, *instkey;
key_ref_t key_ref;
- char *tmpbuf;
+ char *infobuf;
long ret;
+ int desclen, infolen;
key_ref = lookup_user_key(keyid, KEY_LOOKUP_PARTIAL, KEY_NEED_VIEW);
if (IS_ERR(key_ref)) {
@@ -586,38 +589,31 @@
}
okay:
- /* calculate how much description we're going to return */
- ret = -ENOMEM;
- tmpbuf = kmalloc(PAGE_SIZE, GFP_KERNEL);
- if (!tmpbuf)
- goto error2;
-
key = key_ref_to_ptr(key_ref);
+ desclen = strlen(key->description);
- ret = snprintf(tmpbuf, PAGE_SIZE - 1,
- "%s;%d;%d;%08x;%s",
- key->type->name,
- from_kuid_munged(current_user_ns(), key->uid),
- from_kgid_munged(current_user_ns(), key->gid),
- key->perm,
- key->description ?: "");
-
- /* include a NUL char at the end of the data */
- if (ret > PAGE_SIZE - 1)
- ret = PAGE_SIZE - 1;
- tmpbuf[ret] = 0;
- ret++;
+ /* calculate how much information we're going to return */
+ ret = -ENOMEM;
+ infobuf = kasprintf(GFP_KERNEL,
+ "%s;%d;%d;%08x;",
+ key->type->name,
+ from_kuid_munged(current_user_ns(), key->uid),
+ from_kgid_munged(current_user_ns(), key->gid),
+ key->perm);
+ if (!infobuf)
+ goto error2;
+ infolen = strlen(infobuf);
+ ret = infolen + desclen + 1;
/* consider returning the data */
- if (buffer && buflen > 0) {
- if (buflen > ret)
- buflen = ret;
-
- if (copy_to_user(buffer, tmpbuf, buflen) != 0)
+ if (buffer && buflen >= ret) {
+ if (copy_to_user(buffer, infobuf, infolen) != 0 ||
+ copy_to_user(buffer + infolen, key->description,
+ desclen + 1) != 0)
ret = -EFAULT;
}
- kfree(tmpbuf);
+ kfree(infobuf);
error2:
key_ref_put(key_ref);
error:
@@ -649,7 +645,7 @@
if (ret < 0)
goto error;
- description = strndup_user(_description, PAGE_SIZE);
+ description = strndup_user(_description, KEY_MAX_DESC_SIZE);
if (IS_ERR(description)) {
ret = PTR_ERR(description);
goto error;
diff --git a/security/keys/keyring.c b/security/keys/keyring.c
index 8177010..e72548b 100644
--- a/security/keys/keyring.c
+++ b/security/keys/keyring.c
@@ -546,7 +546,8 @@
}
if (key->expiry && ctx->now.tv_sec >= key->expiry) {
- ctx->result = ERR_PTR(-EKEYEXPIRED);
+ if (!(ctx->flags & KEYRING_SEARCH_SKIP_EXPIRED))
+ ctx->result = ERR_PTR(-EKEYEXPIRED);
kleave(" = %d [expire]", ctx->skipped_ret);
goto skipped;
}
@@ -628,6 +629,10 @@
ctx->index_key.type->name,
ctx->index_key.description);
+#define STATE_CHECKS (KEYRING_SEARCH_NO_STATE_CHECK | KEYRING_SEARCH_DO_STATE_CHECK)
+ BUG_ON((ctx->flags & STATE_CHECKS) == 0 ||
+ (ctx->flags & STATE_CHECKS) == STATE_CHECKS);
+
if (ctx->index_key.description)
ctx->index_key.desc_len = strlen(ctx->index_key.description);
@@ -637,7 +642,6 @@
if (ctx->match_data.lookup_type == KEYRING_SEARCH_LOOKUP_ITERATE ||
keyring_compare_object(keyring, &ctx->index_key)) {
ctx->skipped_ret = 2;
- ctx->flags |= KEYRING_SEARCH_DO_STATE_CHECK;
switch (ctx->iterator(keyring_key_to_ptr(keyring), ctx)) {
case 1:
goto found;
@@ -649,8 +653,6 @@
}
ctx->skipped_ret = 0;
- if (ctx->flags & KEYRING_SEARCH_NO_STATE_CHECK)
- ctx->flags &= ~KEYRING_SEARCH_DO_STATE_CHECK;
/* Start processing a new keyring */
descend_to_keyring:
diff --git a/security/keys/request_key.c b/security/keys/request_key.c
index bb4337c..0c7aea4 100644
--- a/security/keys/request_key.c
+++ b/security/keys/request_key.c
@@ -516,6 +516,8 @@
.match_data.cmp = key_default_cmp,
.match_data.raw_data = description,
.match_data.lookup_type = KEYRING_SEARCH_LOOKUP_DIRECT,
+ .flags = (KEYRING_SEARCH_DO_STATE_CHECK |
+ KEYRING_SEARCH_SKIP_EXPIRED),
};
struct key *key;
key_ref_t key_ref;
diff --git a/security/keys/request_key_auth.c b/security/keys/request_key_auth.c
index 6639e2c..5d672f7 100644
--- a/security/keys/request_key_auth.c
+++ b/security/keys/request_key_auth.c
@@ -249,6 +249,7 @@
.match_data.cmp = key_default_cmp,
.match_data.raw_data = description,
.match_data.lookup_type = KEYRING_SEARCH_LOOKUP_DIRECT,
+ .flags = KEYRING_SEARCH_DO_STATE_CHECK,
};
struct key *authkey;
key_ref_t authkey_ref;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 14f16be..b118a5b 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4790,6 +4790,8 @@
SND_PCI_QUIRK(0x1028, 0x0638, "Dell Inspiron 5439", ALC290_FIXUP_MONO_SPEAKERS_HSJACK),
SND_PCI_QUIRK(0x1028, 0x064a, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x064b, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1028, 0x06d9, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1028, 0x06da, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x164a, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x164b, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC2),
