Merge tag 'pci-v3.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Miscellaneous
- Remove duplicate disable from pcie_portdrv_remove() (Yinghai Lu)
- Fix whitespace, capitalization, and spelling errors (Bjorn Helgaas)"
* tag 'pci-v3.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Remove duplicate pci_disable_device() from pcie_portdrv_remove()
PCI: Fix whitespace, capitalization, and spelling errors
diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
index 95655d7..e52d7ff 100644
--- a/drivers/pci/ats.c
+++ b/drivers/pci/ats.c
@@ -410,7 +410,7 @@
* Otherwise is returns a bitmask with supported features. Current
* features reported are:
* PCI_PASID_CAP_EXEC - Execute permission supported
- * PCI_PASID_CAP_PRIV - Priviledged mode supported
+ * PCI_PASID_CAP_PRIV - Privileged mode supported
*/
int pci_pasid_features(struct pci_dev *pdev)
{
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 7c4f38d..0afbbbc 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -249,7 +249,7 @@
void __iomem *afi;
int irq;
- struct list_head busses;
+ struct list_head buses;
struct resource *cs;
struct resource io;
@@ -399,14 +399,14 @@
/*
* Look up a virtual address mapping for the specified bus number. If no such
- * mapping existis, try to create one.
+ * mapping exists, try to create one.
*/
static void __iomem *tegra_pcie_bus_map(struct tegra_pcie *pcie,
unsigned int busnr)
{
struct tegra_pcie_bus *bus;
- list_for_each_entry(bus, &pcie->busses, list)
+ list_for_each_entry(bus, &pcie->buses, list)
if (bus->nr == busnr)
return (void __iomem *)bus->area->addr;
@@ -414,7 +414,7 @@
if (IS_ERR(bus))
return NULL;
- list_add_tail(&bus->list, &pcie->busses);
+ list_add_tail(&bus->list, &pcie->buses);
return (void __iomem *)bus->area->addr;
}
@@ -808,7 +808,7 @@
value &= ~AFI_FUSE_PCIE_T0_GEN2_DIS;
afi_writel(pcie, value, AFI_FUSE);
- /* initialze internal PHY, enable up to 16 PCIE lanes */
+ /* initialize internal PHY, enable up to 16 PCIE lanes */
pads_writel(pcie, 0x0, PADS_CTL_SEL);
/* override IDDQ to 1 on all 4 lanes */
@@ -1624,7 +1624,7 @@
if (!pcie)
return -ENOMEM;
- INIT_LIST_HEAD(&pcie->busses);
+ INIT_LIST_HEAD(&pcie->buses);
INIT_LIST_HEAD(&pcie->ports);
pcie->soc_data = match->data;
pcie->dev = &pdev->dev;
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index 1e1fea4..e33b68b 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -197,7 +197,7 @@
return -ENOSPC;
/*
* Check if this position is at correct offset.nvec is always a
- * power of two. pos0 must be nvec bit alligned.
+ * power of two. pos0 must be nvec bit aligned.
*/
if (pos % msgvec)
pos += msgvec - (pos % msgvec);
diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index 0a648af..df8caec 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -133,8 +133,8 @@
To compile this driver as a module, choose M here: the
module will be called rpadlpar_io.
-
- When in doubt, say N.
+
+ When in doubt, say N.
config HOTPLUG_PCI_SGI
tristate "SGI PCI Hotplug Support"
diff --git a/drivers/pci/hotplug/Makefile b/drivers/pci/hotplug/Makefile
index 47ec8c8..3e6532b 100644
--- a/drivers/pci/hotplug/Makefile
+++ b/drivers/pci/hotplug/Makefile
@@ -31,7 +31,7 @@
cpci_hotplug_pci.o
endif
ifdef CONFIG_ACPI
-pci_hotplug-objs += acpi_pcihp.o
+pci_hotplug-objs += acpi_pcihp.o
endif
cpqphp-objs := cpqphp_core.o \
diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
index 8650d39..dca66bc 100644
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -111,7 +111,7 @@
* @info: must match the pointer used to register
*
* Description: This is used to un-register a hardware specific acpi
- * driver that manipulates the attention LED. The pointer to the
+ * driver that manipulates the attention LED. The pointer to the
* info struct must be the same as the one used to set it.
*/
int acpiphp_unregister_attention(struct acpiphp_attention_info *info)
@@ -169,8 +169,8 @@
* was registered with us. This allows hardware specific
* ACPI implementations to blink the light for us.
*/
- static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 status)
- {
+static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 status)
+{
int retval = -ENODEV;
pr_debug("%s - physical_slot = %s\n", __func__,
@@ -182,8 +182,8 @@
} else
attention_info = NULL;
return retval;
- }
-
+}
+
/**
* get_power_status - get power status of a slot
@@ -323,7 +323,7 @@
if (retval) {
pr_err("pci_hp_register failed with error %d\n", retval);
goto error_hpslot;
- }
+ }
pr_info("Slot [%s] registered\n", slot_name(slot));
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 5b4e9eb..1cf605f 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -325,7 +325,7 @@
list_add_tail(&slot->node, &bridge->slots);
- /* Register slots for ejectable funtions only. */
+ /* Register slots for ejectable functions only. */
if (acpi_pci_check_ejectable(pbus, handle) || is_dock_device(handle)) {
unsigned long long sun;
int retval;
diff --git a/drivers/pci/hotplug/acpiphp_ibm.c b/drivers/pci/hotplug/acpiphp_ibm.c
index 0d64c41..ecfac7e 100644
--- a/drivers/pci/hotplug/acpiphp_ibm.c
+++ b/drivers/pci/hotplug/acpiphp_ibm.c
@@ -116,7 +116,7 @@
.read = ibm_read_apci_table,
.write = NULL,
};
-static struct acpiphp_attention_info ibm_attention_info =
+static struct acpiphp_attention_info ibm_attention_info =
{
.set_attn = ibm_set_attention_status,
.get_attn = ibm_get_attention_status,
@@ -171,9 +171,9 @@
*/
static int ibm_set_attention_status(struct hotplug_slot *slot, u8 status)
{
- union acpi_object args[2];
+ union acpi_object args[2];
struct acpi_object_list params = { .pointer = args, .count = 2 };
- acpi_status stat;
+ acpi_status stat;
unsigned long long rc;
union apci_descriptor *ibm_slot;
@@ -208,7 +208,7 @@
*
* Description: This method is registered with the acpiphp module as a
* callback to do the device specific task of getting the LED status.
- *
+ *
* Because there is no direct method of getting the LED status directly
* from an ACPI call, we read the aPCI table and parse out our
* slot descriptor to read the status from that.
@@ -259,7 +259,7 @@
pr_debug("%s: Received notification %02x\n", __func__, event);
if (subevent == 0x80) {
- pr_debug("%s: generationg bus event\n", __func__);
+ pr_debug("%s: generating bus event\n", __func__);
acpi_bus_generate_netlink_event(note->device->pnp.device_class,
dev_name(¬e->device->dev),
note->event, detail);
@@ -387,7 +387,7 @@
u32 lvl, void *context, void **rv)
{
acpi_handle *phandle = (acpi_handle *)context;
- acpi_status status;
+ acpi_status status;
struct acpi_device_info *info;
int retval = 0;
@@ -405,7 +405,7 @@
info->hardware_id.string, handle);
*phandle = handle;
/* returning non-zero causes the search to stop
- * and returns this value to the caller of
+ * and returns this value to the caller of
* acpi_walk_namespace, but it also causes some warnings
* in the acpi debug code to print...
*/
diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c
index 2b4c412..00c81a3 100644
--- a/drivers/pci/hotplug/cpci_hotplug_core.c
+++ b/drivers/pci/hotplug/cpci_hotplug_core.c
@@ -46,7 +46,7 @@
do { \
if (cpci_debug) \
printk (KERN_DEBUG "%s: " format "\n", \
- MY_NAME , ## arg); \
+ MY_NAME , ## arg); \
} while (0)
#define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
#define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)
diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c
index d8add34..d3add98 100644
--- a/drivers/pci/hotplug/cpci_hotplug_pci.c
+++ b/drivers/pci/hotplug/cpci_hotplug_pci.c
@@ -39,7 +39,7 @@
do { \
if (cpci_debug) \
printk (KERN_DEBUG "%s: " format "\n", \
- MY_NAME , ## arg); \
+ MY_NAME , ## arg); \
} while (0)
#define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
#define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)
diff --git a/drivers/pci/hotplug/cpcihp_generic.c b/drivers/pci/hotplug/cpcihp_generic.c
index a6a71c4..7536eef 100644
--- a/drivers/pci/hotplug/cpcihp_generic.c
+++ b/drivers/pci/hotplug/cpcihp_generic.c
@@ -13,14 +13,14 @@
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
- * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
@@ -53,9 +53,9 @@
#define dbg(format, arg...) \
do { \
- if(debug) \
+ if (debug) \
printk (KERN_DEBUG "%s: " format "\n", \
- MY_NAME , ## arg); \
+ MY_NAME , ## arg); \
} while(0)
#define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
#define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)
diff --git a/drivers/pci/hotplug/cpcihp_zt5550.c b/drivers/pci/hotplug/cpcihp_zt5550.c
index 449b4bb..e8c4a7c 100644
--- a/drivers/pci/hotplug/cpcihp_zt5550.c
+++ b/drivers/pci/hotplug/cpcihp_zt5550.c
@@ -13,14 +13,14 @@
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
- * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
@@ -48,9 +48,9 @@
#define dbg(format, arg...) \
do { \
- if(debug) \
+ if (debug) \
printk (KERN_DEBUG "%s: " format "\n", \
- MY_NAME , ## arg); \
+ MY_NAME , ## arg); \
} while(0)
#define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
#define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)
@@ -285,7 +285,7 @@
{ 0, }
};
MODULE_DEVICE_TABLE(pci, zt5550_hc_pci_tbl);
-
+
static struct pci_driver zt5550_hc_driver = {
.name = "zt5550_hc",
.id_table = zt5550_hc_pci_tbl,
diff --git a/drivers/pci/hotplug/cpcihp_zt5550.h b/drivers/pci/hotplug/cpcihp_zt5550.h
index bebc606..9a57fda 100644
--- a/drivers/pci/hotplug/cpcihp_zt5550.h
+++ b/drivers/pci/hotplug/cpcihp_zt5550.h
@@ -13,14 +13,14 @@
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
- * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
@@ -55,7 +55,7 @@
#define HC_CMD_REG 0x0C
#define ARB_CONFIG_GNT_REG 0x10
#define ARB_CONFIG_CFG_REG 0x12
-#define ARB_CONFIG_REG 0x10
+#define ARB_CONFIG_REG 0x10
#define ISOL_CONFIG_REG 0x18
#define FAULT_STATUS_REG 0x20
#define FAULT_CONFIG_REG 0x24
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index c8eaeb4..31273e1 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -862,10 +862,10 @@
goto err_disable_device;
}
- /* Check for the proper subsystem ID's
+ /* Check for the proper subsystem IDs
* Intel uses a different SSID programming model than Compaq.
* For Intel, each SSID bit identifies a PHP capability.
- * Also Intel HPC's may have RID=0.
+ * Also Intel HPCs may have RID=0.
*/
if ((pdev->revision <= 2) && (vendor_id != PCI_VENDOR_ID_INTEL)) {
err(msg_HPC_not_supported);
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
index d282019..11845b7 100644
--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -1231,7 +1231,7 @@
/* Only if mode change...*/
if (((bus->cur_bus_speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) ||
- ((bus->cur_bus_speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz)))
+ ((bus->cur_bus_speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz)))
set_SOGO(ctrl);
wait_for_ctrl_irq(ctrl);
@@ -1828,7 +1828,7 @@
if (ctrl->event_queue[loop].event_type == INT_BUTTON_PRESS) {
dbg("button pressed\n");
- } else if (ctrl->event_queue[loop].event_type ==
+ } else if (ctrl->event_queue[loop].event_type ==
INT_BUTTON_CANCEL) {
dbg("button cancel\n");
del_timer(&p_slot->task_event);
@@ -2411,11 +2411,11 @@
if (rc)
return rc;
- /* find range of busses to use */
+ /* find range of buses to use */
dbg("find ranges of buses to use\n");
bus_node = get_max_resource(&(resources->bus_head), 1);
- /* If we don't have any busses to allocate, we can't continue */
+ /* If we don't have any buses to allocate, we can't continue */
if (!bus_node)
return -ENOMEM;
@@ -2900,7 +2900,7 @@
/* If this function needs an interrupt and we are behind
* a bridge and the pin is tied to something that's
- * alread mapped, set this one the same */
+ * already mapped, set this one the same */
if (temp_byte && resources->irqs &&
(resources->irqs->valid_INT &
(0x01 << ((temp_byte + resources->irqs->barber_pole - 1) & 0x03)))) {
diff --git a/drivers/pci/hotplug/cpqphp_pci.c b/drivers/pci/hotplug/cpqphp_pci.c
index 09801c6..6e4a12c 100644
--- a/drivers/pci/hotplug/cpqphp_pci.c
+++ b/drivers/pci/hotplug/cpqphp_pci.c
@@ -291,7 +291,7 @@
*
* Reads configuration for all slots in a PCI bus and saves info.
*
- * Note: For non-hot plug busses, the slot # saved is the device #
+ * Note: For non-hot plug buses, the slot # saved is the device #
*
* returns 0 if success
*/
@@ -455,7 +455,7 @@
* cpqhp_save_slot_config
*
* Saves configuration info for all PCI devices in a given slot
- * including subordinate busses.
+ * including subordinate buses.
*
* returns 0 if success
*/
@@ -1556,4 +1556,3 @@
kfree(tres);
}
}
-
diff --git a/drivers/pci/hotplug/ibmphp.h b/drivers/pci/hotplug/ibmphp.h
index 8c5b258..e3e46a7 100644
--- a/drivers/pci/hotplug/ibmphp.h
+++ b/drivers/pci/hotplug/ibmphp.h
@@ -59,7 +59,7 @@
/************************************************************
-* RESOURE TYPE *
+* RESOURCE TYPE *
************************************************************/
#define EBDA_RSRC_TYPE_MASK 0x03
@@ -103,7 +103,7 @@
//--------------------------------------------------------------
struct rio_table_hdr {
- u8 ver_num;
+ u8 ver_num;
u8 scal_count;
u8 riodev_count;
u16 offset;
@@ -127,7 +127,7 @@
};
//--------------------------------------------------------------
-// RIO DETAIL
+// RIO DETAIL
//--------------------------------------------------------------
struct rio_detail {
@@ -152,7 +152,7 @@
u8 first_slot_num;
u8 middle_num;
struct list_head opt_rio_list;
-};
+};
struct opt_rio_lo {
u8 rio_type;
@@ -161,7 +161,7 @@
u8 middle_num;
u8 pack_count;
struct list_head opt_rio_lo_list;
-};
+};
/****************************************************************
* HPC DESCRIPTOR NODE *
@@ -574,7 +574,7 @@
#define HPC_CTLR_IRQ_PENDG 0x80
//----------------------------------------------------------------------------
-// HPC_CTLR_WROKING status return codes
+// HPC_CTLR_WORKING status return codes
//----------------------------------------------------------------------------
#define HPC_CTLR_WORKING_NO 0x00
#define HPC_CTLR_WORKING_YES 0x01
diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c
index cbd72d8..efdc13a 100644
--- a/drivers/pci/hotplug/ibmphp_core.c
+++ b/drivers/pci/hotplug/ibmphp_core.c
@@ -58,7 +58,7 @@
struct pci_bus *ibmphp_pci_bus;
static int max_slots;
-static int irqs[16]; /* PIC mode IRQ's we're using so far (in case MPS
+static int irqs[16]; /* PIC mode IRQs we're using so far (in case MPS
* tables don't provide default info for empty slots */
static int init_flag;
@@ -71,20 +71,20 @@
return get_max_adapter_speed_1 (hs, value, 1);
}
*/
-static inline int get_cur_bus_info(struct slot **sl)
+static inline int get_cur_bus_info(struct slot **sl)
{
int rc = 1;
struct slot * slot_cur = *sl;
debug("options = %x\n", slot_cur->ctrl->options);
- debug("revision = %x\n", slot_cur->ctrl->revision);
+ debug("revision = %x\n", slot_cur->ctrl->revision);
- if (READ_BUS_STATUS(slot_cur->ctrl))
+ if (READ_BUS_STATUS(slot_cur->ctrl))
rc = ibmphp_hpc_readslot(slot_cur, READ_BUSSTATUS, NULL);
-
- if (rc)
+
+ if (rc)
return rc;
-
+
slot_cur->bus_on->current_speed = CURRENT_BUS_SPEED(slot_cur->busstatus);
if (READ_BUS_MODE(slot_cur->ctrl))
slot_cur->bus_on->current_bus_mode =
@@ -96,7 +96,7 @@
slot_cur->busstatus,
slot_cur->bus_on->current_speed,
slot_cur->bus_on->current_bus_mode);
-
+
*sl = slot_cur;
return 0;
}
@@ -104,8 +104,8 @@
static inline int slot_update(struct slot **sl)
{
int rc;
- rc = ibmphp_hpc_readslot(*sl, READ_ALLSTAT, NULL);
- if (rc)
+ rc = ibmphp_hpc_readslot(*sl, READ_ALLSTAT, NULL);
+ if (rc)
return rc;
if (!init_flag)
rc = get_cur_bus_info(sl);
@@ -172,7 +172,7 @@
debug("(*cur_slot)->irq[3] = %x\n",
(*cur_slot)->irq[3]);
- debug("rtable->exlusive_irqs = %x\n",
+ debug("rtable->exclusive_irqs = %x\n",
rtable->exclusive_irqs);
debug("rtable->slots[loop].irq[0].bitmap = %x\n",
rtable->slots[loop].irq[0].bitmap);
@@ -271,7 +271,7 @@
else
rc = -ENODEV;
}
- } else
+ } else
rc = -ENODEV;
ibmphp_unlock_operations();
@@ -288,7 +288,7 @@
debug("get_attention_status - Entry hotplug_slot[%lx] pvalue[%lx]\n",
(ulong) hotplug_slot, (ulong) value);
-
+
ibmphp_lock_operations();
if (hotplug_slot) {
pslot = hotplug_slot->private;
@@ -406,14 +406,14 @@
ibmphp_lock_operations();
mode = slot->supported_bus_mode;
- speed = slot->supported_speed;
+ speed = slot->supported_speed;
ibmphp_unlock_operations();
switch (speed) {
case BUS_SPEED_33:
break;
case BUS_SPEED_66:
- if (mode == BUS_MODE_PCIX)
+ if (mode == BUS_MODE_PCIX)
speed += 0x01;
break;
case BUS_SPEED_100:
@@ -515,13 +515,13 @@
debug("BEFORE GETTING SLOT STATUS, slot # %x\n",
slot_cur->number);
- if (slot_cur->ctrl->revision == 0xFF)
+ if (slot_cur->ctrl->revision == 0xFF)
if (get_ctrl_revision(slot_cur,
&slot_cur->ctrl->revision))
return -1;
- if (slot_cur->bus_on->current_speed == 0xFF)
- if (get_cur_bus_info(&slot_cur))
+ if (slot_cur->bus_on->current_speed == 0xFF)
+ if (get_cur_bus_info(&slot_cur))
return -1;
get_max_bus_speed(slot_cur);
@@ -539,8 +539,8 @@
debug("SLOT_PRESENT = %x\n", SLOT_PRESENT(slot_cur->status));
debug("SLOT_LATCH = %x\n", SLOT_LATCH(slot_cur->status));
- if ((SLOT_PWRGD(slot_cur->status)) &&
- !(SLOT_PRESENT(slot_cur->status)) &&
+ if ((SLOT_PWRGD(slot_cur->status)) &&
+ !(SLOT_PRESENT(slot_cur->status)) &&
!(SLOT_LATCH(slot_cur->status))) {
debug("BEFORE POWER OFF COMMAND\n");
rc = power_off(slot_cur);
@@ -581,13 +581,13 @@
switch (opn) {
case ENABLE:
- if (!(SLOT_PWRGD(slot_cur->status)) &&
- (SLOT_PRESENT(slot_cur->status)) &&
+ if (!(SLOT_PWRGD(slot_cur->status)) &&
+ (SLOT_PRESENT(slot_cur->status)) &&
!(SLOT_LATCH(slot_cur->status)))
return 0;
break;
case DISABLE:
- if ((SLOT_PWRGD(slot_cur->status)) &&
+ if ((SLOT_PWRGD(slot_cur->status)) &&
(SLOT_PRESENT(slot_cur->status)) &&
!(SLOT_LATCH(slot_cur->status)))
return 0;
@@ -617,7 +617,7 @@
err("out of system memory\n");
return -ENOMEM;
}
-
+
info->power_status = SLOT_PWRGD(slot_cur->status);
info->attention_status = SLOT_ATTN(slot_cur->status,
slot_cur->ext_status);
@@ -638,7 +638,7 @@
case BUS_SPEED_33:
break;
case BUS_SPEED_66:
- if (mode == BUS_MODE_PCIX)
+ if (mode == BUS_MODE_PCIX)
bus_speed += 0x01;
else if (mode == BUS_MODE_PCI)
;
@@ -654,8 +654,8 @@
}
bus->cur_bus_speed = bus_speed;
- // To do: bus_names
-
+ // To do: bus_names
+
rc = pci_hp_change_slot_info(slot_cur->hotplug_slot, info);
kfree(info);
return rc;
@@ -729,8 +729,8 @@
}
/*
- * The following function is to fix kernel bug regarding
- * getting bus entries, here we manually add those primary
+ * The following function is to fix kernel bug regarding
+ * getting bus entries, here we manually add those primary
* bus entries to kernel bus structure whenever apply
*/
static u8 bus_structure_fixup(u8 busno)
@@ -814,7 +814,7 @@
}
/*******************************************************
- * Returns whether the bus is empty or not
+ * Returns whether the bus is empty or not
*******************************************************/
static int is_bus_empty(struct slot * slot_cur)
{
@@ -842,7 +842,7 @@
}
/***********************************************************
- * If the HPC permits and the bus currently empty, tries to set the
+ * If the HPC permits and the bus currently empty, tries to set the
* bus speed and mode at the maximum card and bus capability
* Parameters: slot
* Returns: bus is set (0) or error code
@@ -856,7 +856,7 @@
static struct pci_device_id ciobx[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, 0x0101) },
{ },
- };
+ };
debug("%s - entry slot # %d\n", __func__, slot_cur->number);
if (SET_BUS_STATUS(slot_cur->ctrl) && is_bus_empty(slot_cur)) {
@@ -877,7 +877,7 @@
else if (!SLOT_BUS_MODE(slot_cur->ext_status))
/* if max slot/bus capability is 66 pci
and there's no bus mode mismatch, then
- the adapter supports 66 pci */
+ the adapter supports 66 pci */
cmd = HPC_BUS_66CONVMODE;
else
cmd = HPC_BUS_33CONVMODE;
@@ -930,7 +930,7 @@
return -EIO;
}
}
- /* This is for x440, once Brandon fixes the firmware,
+ /* This is for x440, once Brandon fixes the firmware,
will not need this delay */
msleep(1000);
debug("%s -Exit\n", __func__);
@@ -938,9 +938,9 @@
}
/* This routine checks the bus limitations that the slot is on from the BIOS.
- * This is used in deciding whether or not to power up the slot.
+ * This is used in deciding whether or not to power up the slot.
* (electrical/spec limitations. For example, >1 133 MHz or >2 66 PCI cards on
- * same bus)
+ * same bus)
* Parameters: slot
* Returns: 0 = no limitations, -EINVAL = exceeded limitations on the bus
*/
@@ -986,7 +986,7 @@
static inline void print_card_capability(struct slot *slot_cur)
{
info("capability of the card is ");
- if ((slot_cur->ext_status & CARD_INFO) == PCIX133)
+ if ((slot_cur->ext_status & CARD_INFO) == PCIX133)
info(" 133 MHz PCI-X\n");
else if ((slot_cur->ext_status & CARD_INFO) == PCIX66)
info(" 66 MHz PCI-X\n");
@@ -1020,7 +1020,7 @@
}
attn_LED_blink(slot_cur);
-
+
rc = set_bus(slot_cur);
if (rc) {
err("was not able to set the bus\n");
@@ -1082,7 +1082,7 @@
rc = slot_update(&slot_cur);
if (rc)
goto error_power;
-
+
rc = -EINVAL;
if (SLOT_POWER(slot_cur->status) && !(SLOT_PWRGD(slot_cur->status))) {
err("power fault occurred trying to power up...\n");
@@ -1093,7 +1093,7 @@
"speed and card capability\n");
print_card_capability(slot_cur);
goto error_power;
- }
+ }
/* Don't think this case will happen after above checks...
* but just in case, for paranoia sake */
if (!(SLOT_POWER(slot_cur->status))) {
@@ -1144,7 +1144,7 @@
ibmphp_print_test();
rc = ibmphp_update_slot_info(slot_cur);
exit:
- ibmphp_unlock_operations();
+ ibmphp_unlock_operations();
return rc;
error_nopower:
@@ -1180,7 +1180,7 @@
{
struct slot *slot = hotplug_slot->private;
int rc;
-
+
ibmphp_lock_operations();
rc = ibmphp_do_disable_slot(slot);
ibmphp_unlock_operations();
@@ -1192,12 +1192,12 @@
int rc;
u8 flag;
- debug("DISABLING SLOT...\n");
-
+ debug("DISABLING SLOT...\n");
+
if ((slot_cur == NULL) || (slot_cur->ctrl == NULL)) {
return -ENODEV;
}
-
+
flag = slot_cur->flag;
slot_cur->flag = 1;
@@ -1210,7 +1210,7 @@
attn_LED_blink(slot_cur);
if (slot_cur->func == NULL) {
- /* We need this for fncs's that were there on bootup */
+ /* We need this for functions that were there on bootup */
slot_cur->func = kzalloc(sizeof(struct pci_func), GFP_KERNEL);
if (!slot_cur->func) {
err("out of system memory\n");
@@ -1222,12 +1222,13 @@
}
ibm_unconfigure_device(slot_cur->func);
-
- /* If we got here from latch suddenly opening on operating card or
- a power fault, there's no power to the card, so cannot
- read from it to determine what resources it occupied. This operation
- is forbidden anyhow. The best we can do is remove it from kernel
- lists at least */
+
+ /*
+ * If we got here from latch suddenly opening on operating card or
+ * a power fault, there's no power to the card, so cannot
+ * read from it to determine what resources it occupied. This operation
+ * is forbidden anyhow. The best we can do is remove it from kernel
+ * lists at least */
if (!flag) {
attn_off(slot_cur);
@@ -1264,7 +1265,7 @@
rc = -EFAULT;
goto exit;
}
- if (flag)
+ if (flag)
ibmphp_update_slot_info(slot_cur);
goto exit;
}
@@ -1339,7 +1340,7 @@
debug("AFTER Resource & EBDA INITIALIZATIONS\n");
max_slots = get_max_slots();
-
+
if ((rc = ibmphp_register_pci()))
goto error;
diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c
index 9df78bc..bd04415 100644
--- a/drivers/pci/hotplug/ibmphp_ebda.c
+++ b/drivers/pci/hotplug/ibmphp_ebda.c
@@ -123,7 +123,7 @@
static void __init print_bus_info (void)
{
struct bus_info *ptr;
-
+
list_for_each_entry(ptr, &bus_info_head, bus_info_list) {
debug ("%s - slot_min = %x\n", __func__, ptr->slot_min);
debug ("%s - slot_max = %x\n", __func__, ptr->slot_max);
@@ -131,7 +131,7 @@
debug ("%s - bus# = %x\n", __func__, ptr->busno);
debug ("%s - current_speed = %x\n", __func__, ptr->current_speed);
debug ("%s - controller_id = %x\n", __func__, ptr->controller_id);
-
+
debug ("%s - slots_at_33_conv = %x\n", __func__, ptr->slots_at_33_conv);
debug ("%s - slots_at_66_conv = %x\n", __func__, ptr->slots_at_66_conv);
debug ("%s - slots_at_66_pcix = %x\n", __func__, ptr->slots_at_66_pcix);
@@ -144,7 +144,7 @@
static void print_lo_info (void)
{
struct rio_detail *ptr;
- debug ("print_lo_info ----\n");
+ debug ("print_lo_info ----\n");
list_for_each_entry(ptr, &rio_lo_head, rio_detail_list) {
debug ("%s - rio_node_id = %x\n", __func__, ptr->rio_node_id);
debug ("%s - rio_type = %x\n", __func__, ptr->rio_type);
@@ -176,7 +176,7 @@
struct ebda_pci_rsrc *ptr;
list_for_each_entry(ptr, &ibmphp_ebda_pci_rsrc_head, ebda_pci_rsrc_list) {
- debug ("%s - rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n",
+ debug ("%s - rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n",
__func__, ptr->rsrc_type ,ptr->bus_num, ptr->dev_fun,ptr->start_addr, ptr->end_addr);
}
}
@@ -259,7 +259,7 @@
ebda_seg = readw (io_mem);
iounmap (io_mem);
debug ("returned ebda segment: %x\n", ebda_seg);
-
+
io_mem = ioremap(ebda_seg<<4, 1);
if (!io_mem)
return -ENOMEM;
@@ -310,7 +310,7 @@
re = readw (io_mem + sub_addr); /* next sub blk */
sub_addr += 2;
- rc_id = readw (io_mem + sub_addr); /* sub blk id */
+ rc_id = readw (io_mem + sub_addr); /* sub blk id */
sub_addr += 2;
if (rc_id != 0x5243)
@@ -330,7 +330,7 @@
debug ("info about hpc descriptor---\n");
debug ("hot blk format: %x\n", format);
debug ("num of controller: %x\n", num_ctlrs);
- debug ("offset of hpc data structure enteries: %x\n ", sub_addr);
+ debug ("offset of hpc data structure entries: %x\n ", sub_addr);
sub_addr = base + re; /* re sub blk */
/* FIXME: rc is never used/checked */
@@ -359,7 +359,7 @@
debug ("info about rsrc descriptor---\n");
debug ("format: %x\n", format);
debug ("num of rsrc: %x\n", num_entries);
- debug ("offset of rsrc data structure enteries: %x\n ", sub_addr);
+ debug ("offset of rsrc data structure entries: %x\n ", sub_addr);
hs_complete = 1;
} else {
@@ -376,7 +376,7 @@
rio_table_ptr->scal_count = readb (io_mem + offset + 1);
rio_table_ptr->riodev_count = readb (io_mem + offset + 2);
rio_table_ptr->offset = offset +3 ;
-
+
debug("info about rio table hdr ---\n");
debug("ver_num: %x\nscal_count: %x\nriodev_count: %x\noffset of rio table: %x\n ",
rio_table_ptr->ver_num, rio_table_ptr->scal_count,
@@ -440,12 +440,12 @@
rio_detail_ptr->chassis_num = readb (io_mem + offset + 14);
// debug ("rio_node_id: %x\nbbar: %x\nrio_type: %x\nowner_id: %x\nport0_node: %x\nport0_port: %x\nport1_node: %x\nport1_port: %x\nfirst_slot_num: %x\nstatus: %x\n", rio_detail_ptr->rio_node_id, rio_detail_ptr->bbar, rio_detail_ptr->rio_type, rio_detail_ptr->owner_id, rio_detail_ptr->port0_node_connect, rio_detail_ptr->port0_port_connect, rio_detail_ptr->port1_node_connect, rio_detail_ptr->port1_port_connect, rio_detail_ptr->first_slot_num, rio_detail_ptr->status);
//create linked list of chassis
- if (rio_detail_ptr->rio_type == 4 || rio_detail_ptr->rio_type == 5)
+ if (rio_detail_ptr->rio_type == 4 || rio_detail_ptr->rio_type == 5)
list_add (&rio_detail_ptr->rio_detail_list, &rio_vg_head);
- //create linked list of expansion box
- else if (rio_detail_ptr->rio_type == 6 || rio_detail_ptr->rio_type == 7)
+ //create linked list of expansion box
+ else if (rio_detail_ptr->rio_type == 6 || rio_detail_ptr->rio_type == 7)
list_add (&rio_detail_ptr->rio_detail_list, &rio_lo_head);
- else
+ else
// not in my concern
kfree (rio_detail_ptr);
offset += 15;
@@ -456,7 +456,7 @@
}
/*
- * reorganizing linked list of chassis
+ * reorganizing linked list of chassis
*/
static struct opt_rio *search_opt_vg (u8 chassis_num)
{
@@ -464,7 +464,7 @@
list_for_each_entry(ptr, &opt_vg_head, opt_rio_list) {
if (ptr->chassis_num == chassis_num)
return ptr;
- }
+ }
return NULL;
}
@@ -472,7 +472,7 @@
{
struct opt_rio *opt_rio_ptr = NULL;
struct rio_detail *rio_detail_ptr = NULL;
-
+
list_for_each_entry(rio_detail_ptr, &rio_vg_head, rio_detail_list) {
opt_rio_ptr = search_opt_vg (rio_detail_ptr->chassis_num);
if (!opt_rio_ptr) {
@@ -484,14 +484,14 @@
opt_rio_ptr->first_slot_num = rio_detail_ptr->first_slot_num;
opt_rio_ptr->middle_num = rio_detail_ptr->first_slot_num;
list_add (&opt_rio_ptr->opt_rio_list, &opt_vg_head);
- } else {
+ } else {
opt_rio_ptr->first_slot_num = min (opt_rio_ptr->first_slot_num, rio_detail_ptr->first_slot_num);
opt_rio_ptr->middle_num = max (opt_rio_ptr->middle_num, rio_detail_ptr->first_slot_num);
- }
+ }
}
print_opt_vg ();
- return 0;
-}
+ return 0;
+}
/*
* reorganizing linked list of expansion box
@@ -502,7 +502,7 @@
list_for_each_entry(ptr, &opt_lo_head, opt_rio_lo_list) {
if (ptr->chassis_num == chassis_num)
return ptr;
- }
+ }
return NULL;
}
@@ -510,7 +510,7 @@
{
struct opt_rio_lo *opt_rio_lo_ptr = NULL;
struct rio_detail *rio_detail_ptr = NULL;
-
+
list_for_each_entry(rio_detail_ptr, &rio_lo_head, rio_detail_list) {
opt_rio_lo_ptr = search_opt_lo (rio_detail_ptr->chassis_num);
if (!opt_rio_lo_ptr) {
@@ -522,22 +522,22 @@
opt_rio_lo_ptr->first_slot_num = rio_detail_ptr->first_slot_num;
opt_rio_lo_ptr->middle_num = rio_detail_ptr->first_slot_num;
opt_rio_lo_ptr->pack_count = 1;
-
+
list_add (&opt_rio_lo_ptr->opt_rio_lo_list, &opt_lo_head);
- } else {
+ } else {
opt_rio_lo_ptr->first_slot_num = min (opt_rio_lo_ptr->first_slot_num, rio_detail_ptr->first_slot_num);
opt_rio_lo_ptr->middle_num = max (opt_rio_lo_ptr->middle_num, rio_detail_ptr->first_slot_num);
opt_rio_lo_ptr->pack_count = 2;
- }
+ }
}
- return 0;
+ return 0;
}
-
+
/* Since we don't know the max slot number per each chassis, hence go
* through the list of all chassis to find out the range
- * Arguments: slot_num, 1st slot number of the chassis we think we are on,
- * var (0 = chassis, 1 = expansion box)
+ * Arguments: slot_num, 1st slot number of the chassis we think we are on,
+ * var (0 = chassis, 1 = expansion box)
*/
static int first_slot_num (u8 slot_num, u8 first_slot, u8 var)
{
@@ -547,7 +547,7 @@
if (!var) {
list_for_each_entry(opt_vg_ptr, &opt_vg_head, opt_rio_list) {
- if ((first_slot < opt_vg_ptr->first_slot_num) && (slot_num >= opt_vg_ptr->first_slot_num)) {
+ if ((first_slot < opt_vg_ptr->first_slot_num) && (slot_num >= opt_vg_ptr->first_slot_num)) {
rc = -ENODEV;
break;
}
@@ -569,7 +569,7 @@
list_for_each_entry(opt_lo_ptr, &opt_lo_head, opt_rio_lo_list) {
//check to see if this slot_num belongs to expansion box
- if ((slot_num >= opt_lo_ptr->first_slot_num) && (!first_slot_num (slot_num, opt_lo_ptr->first_slot_num, 1)))
+ if ((slot_num >= opt_lo_ptr->first_slot_num) && (!first_slot_num (slot_num, opt_lo_ptr->first_slot_num, 1)))
return opt_lo_ptr;
}
return NULL;
@@ -580,8 +580,8 @@
struct opt_rio *opt_vg_ptr;
list_for_each_entry(opt_vg_ptr, &opt_vg_head, opt_rio_list) {
- //check to see if this slot_num belongs to chassis
- if ((slot_num >= opt_vg_ptr->first_slot_num) && (!first_slot_num (slot_num, opt_vg_ptr->first_slot_num, 0)))
+ //check to see if this slot_num belongs to chassis
+ if ((slot_num >= opt_vg_ptr->first_slot_num) && (!first_slot_num (slot_num, opt_vg_ptr->first_slot_num, 0)))
return opt_vg_ptr;
}
return NULL;
@@ -594,13 +594,13 @@
{
u8 first_slot = 1;
struct slot * slot_cur;
-
+
list_for_each_entry(slot_cur, &ibmphp_slot_head, ibm_slot_list) {
if (slot_cur->ctrl) {
- if ((slot_cur->ctrl->ctlr_type != 4) && (slot_cur->ctrl->ending_slot_num > first_slot) && (slot_num > slot_cur->ctrl->ending_slot_num))
+ if ((slot_cur->ctrl->ctlr_type != 4) && (slot_cur->ctrl->ending_slot_num > first_slot) && (slot_num > slot_cur->ctrl->ending_slot_num))
first_slot = slot_cur->ctrl->ending_slot_num;
}
- }
+ }
return first_slot + 1;
}
@@ -622,11 +622,11 @@
err ("Structure passed is empty\n");
return NULL;
}
-
+
slot_num = slot_cur->number;
memset (str, 0, sizeof(str));
-
+
if (rio_table_ptr) {
if (rio_table_ptr->ver_num == 3) {
opt_vg_ptr = find_chassis_num (slot_num);
@@ -660,7 +660,7 @@
/* if both NULL and we DO have correct RIO table in BIOS */
return NULL;
}
- }
+ }
if (!flag) {
if (slot_cur->ctrl->ctlr_type == 4) {
first_slot = calculate_first_slot (slot_num);
@@ -798,7 +798,7 @@
slot_ptr->ctl_index = readb (io_mem + addr_slot + 2*slot_num);
slot_ptr->slot_cap = readb (io_mem + addr_slot + 3*slot_num);
- // create bus_info lined list --- if only one slot per bus: slot_min = slot_max
+ // create bus_info lined list --- if only one slot per bus: slot_min = slot_max
bus_info_ptr2 = ibmphp_find_same_bus_num (slot_ptr->slot_bus_num);
if (!bus_info_ptr2) {
@@ -814,9 +814,9 @@
bus_info_ptr1->index = bus_index++;
bus_info_ptr1->current_speed = 0xff;
bus_info_ptr1->current_bus_mode = 0xff;
-
+
bus_info_ptr1->controller_id = hpc_ptr->ctlr_id;
-
+
list_add_tail (&bus_info_ptr1->bus_info_list, &bus_info_head);
} else {
@@ -851,7 +851,7 @@
bus_info_ptr2->slots_at_66_conv = bus_ptr->slots_at_66_conv;
bus_info_ptr2->slots_at_66_pcix = bus_ptr->slots_at_66_pcix;
bus_info_ptr2->slots_at_100_pcix = bus_ptr->slots_at_100_pcix;
- bus_info_ptr2->slots_at_133_pcix = bus_ptr->slots_at_133_pcix;
+ bus_info_ptr2->slots_at_133_pcix = bus_ptr->slots_at_133_pcix;
}
bus_ptr++;
}
@@ -864,7 +864,7 @@
hpc_ptr->u.pci_ctlr.dev_fun = readb (io_mem + addr + 1);
hpc_ptr->irq = readb (io_mem + addr + 2);
addr += 3;
- debug ("ctrl bus = %x, ctlr devfun = %x, irq = %x\n",
+ debug ("ctrl bus = %x, ctlr devfun = %x, irq = %x\n",
hpc_ptr->u.pci_ctlr.bus,
hpc_ptr->u.pci_ctlr.dev_fun, hpc_ptr->irq);
break;
@@ -932,7 +932,7 @@
tmp_slot->supported_speed = 2;
else if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_66_MAX) == EBDA_SLOT_66_MAX)
tmp_slot->supported_speed = 1;
-
+
if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_PCIX_CAP) == EBDA_SLOT_PCIX_CAP)
tmp_slot->supported_bus_mode = 1;
else
@@ -1000,7 +1000,7 @@
return rc;
}
-/*
+/*
* map info (bus, devfun, start addr, end addr..) of i/o, memory,
* pfm from the physical addr to a list of resource.
*/
@@ -1057,7 +1057,7 @@
addr += 10;
debug ("rsrc from mem or pfm ---\n");
- debug ("rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n",
+ debug ("rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n",
rsrc_ptr->rsrc_type, rsrc_ptr->bus_num, rsrc_ptr->dev_fun, rsrc_ptr->start_addr, rsrc_ptr->end_addr);
list_add (&rsrc_ptr->ebda_pci_rsrc_list, &ibmphp_ebda_pci_rsrc_head);
@@ -1096,7 +1096,7 @@
struct bus_info *ptr;
list_for_each_entry(ptr, &bus_info_head, bus_info_list) {
- if (ptr->busno == num)
+ if (ptr->busno == num)
return ptr;
}
return NULL;
@@ -1110,7 +1110,7 @@
struct bus_info *ptr;
list_for_each_entry(ptr, &bus_info_head, bus_info_list) {
- if (ptr->busno == num)
+ if (ptr->busno == num)
return ptr->index;
}
return -ENODEV;
@@ -1168,7 +1168,7 @@
.subdevice = HPC_SUBSYSTEM_ID,
.class = ((PCI_CLASS_SYSTEM_PCI_HOTPLUG << 8) | 0x00),
}, {}
-};
+};
MODULE_DEVICE_TABLE(pci, id_table);
@@ -1197,7 +1197,7 @@
struct controller *ctrl;
debug ("inside ibmphp_probe\n");
-
+
list_for_each_entry(ctrl, &ebda_hpc_head, ebda_hpc_list) {
if (ctrl->ctlr_type == 1) {
if ((dev->devfn == ctrl->u.pci_ctlr.dev_fun) && (dev->bus->number == ctrl->u.pci_ctlr.bus)) {
@@ -1210,4 +1210,3 @@
}
return -ENODEV;
}
-
diff --git a/drivers/pci/hotplug/ibmphp_hpc.c b/drivers/pci/hotplug/ibmphp_hpc.c
index f59ed30..5fc7a08 100644
--- a/drivers/pci/hotplug/ibmphp_hpc.c
+++ b/drivers/pci/hotplug/ibmphp_hpc.c
@@ -258,7 +258,7 @@
{
u8 rc;
void __iomem *wpg_addr; // base addr + offset
- unsigned long wpg_data; // data to/from WPG LOHI format
+ unsigned long wpg_data; // data to/from WPG LOHI format
unsigned long ultemp;
unsigned long data; // actual data HILO format
int i;
@@ -351,7 +351,7 @@
}
//------------------------------------------------------------
-// Read from ISA type HPC
+// Read from ISA type HPC
//------------------------------------------------------------
static u8 isa_ctrl_read (struct controller *ctlr_ptr, u8 offset)
{
@@ -372,7 +372,7 @@
{
u16 start_address;
u16 port_address;
-
+
start_address = ctlr_ptr->u.isa_ctlr.io_start;
port_address = start_address + (u16) offset;
outb (data, port_address);
@@ -656,11 +656,11 @@
//--------------------------------------------------------------------
// cleanup
//--------------------------------------------------------------------
-
+
// remove physical to logical address mapping
if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
iounmap (wpg_bbar);
-
+
free_hpc_access ();
debug_polling ("%s - Exit rc[%d]\n", __func__, rc);
@@ -835,7 +835,7 @@
down (&semOperations);
switch (poll_state) {
- case POLL_LATCH_REGISTER:
+ case POLL_LATCH_REGISTER:
oldlatchlow = curlatchlow;
ctrl_count = 0x00;
list_for_each (pslotlist, &ibmphp_slot_head) {
@@ -892,16 +892,16 @@
if (kthread_should_stop())
goto out_sleep;
-
+
down (&semOperations);
-
+
if (poll_count >= POLL_LATCH_CNT) {
poll_count = 0;
poll_state = POLL_SLOTS;
} else
poll_state = POLL_LATCH_REGISTER;
break;
- }
+ }
/* give up the hardware semaphore */
up (&semOperations);
/* sleep for a short time just for good measure */
@@ -958,7 +958,7 @@
// bit 5 - HPC_SLOT_PWRGD
if ((pslot->status & 0x20) != (poldslot->status & 0x20))
// OFF -> ON: ignore, ON -> OFF: disable slot
- if ((poldslot->status & 0x20) && (SLOT_CONNECT (poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT (poldslot->status)))
+ if ((poldslot->status & 0x20) && (SLOT_CONNECT (poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT (poldslot->status)))
disable = 1;
// bit 6 - HPC_SLOT_BUS_SPEED
@@ -980,7 +980,7 @@
pslot->status &= ~HPC_SLOT_POWER;
}
}
- // CLOSE -> OPEN
+ // CLOSE -> OPEN
else if ((SLOT_PWRGD (poldslot->status) == HPC_SLOT_PWRGD_GOOD)
&& (SLOT_CONNECT (poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT (poldslot->status))) {
disable = 1;
@@ -1075,7 +1075,7 @@
debug ("before locking operations \n");
ibmphp_lock_operations ();
debug ("after locking operations \n");
-
+
// wait for poll thread to exit
debug ("before sem_exit down \n");
down (&sem_exit);
diff --git a/drivers/pci/hotplug/ibmphp_pci.c b/drivers/pci/hotplug/ibmphp_pci.c
index c60f5f3..639ea3a 100644
--- a/drivers/pci/hotplug/ibmphp_pci.c
+++ b/drivers/pci/hotplug/ibmphp_pci.c
@@ -1,8 +1,8 @@
/*
* IBM Hot Plug Controller Driver
- *
+ *
* Written By: Irene Zubarev, IBM Corporation
- *
+ *
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2001,2002 IBM Corp.
*
@@ -42,7 +42,7 @@
/*
* NOTE..... If BIOS doesn't provide default routing, we assign:
- * 9 for SCSI, 10 for LAN adapters, and 11 for everything else.
+ * 9 for SCSI, 10 for LAN adapters, and 11 for everything else.
* If adapter is bridged, then we assign 11 to it and devices behind it.
* We also assign the same irq numbers for multi function devices.
* These are PIC mode, so shouldn't matter n.e.ways (hopefully)
@@ -71,11 +71,11 @@
* Configures the device to be added (will allocate needed resources if it
* can), the device can be a bridge or a regular pci device, can also be
* multi-functional
- *
+ *
* Input: function to be added
- *
+ *
* TO DO: The error case with Multifunction device or multi function bridge,
- * if there is an error, will need to go through all previous functions and
+ * if there is an error, will need to go through all previous functions and
* unconfigure....or can add some code into unconfigure_card....
*/
int ibmphp_configure_card (struct pci_func *func, u8 slotno)
@@ -98,7 +98,7 @@
cur_func = func;
/* We only get bus and device from IRQ routing table. So at this point,
- * func->busno is correct, and func->device contains only device (at the 5
+ * func->busno is correct, and func->device contains only device (at the 5
* highest bits)
*/
@@ -151,7 +151,7 @@
cur_func->device, cur_func->busno);
cleanup_count = 6;
goto error;
- }
+ }
cur_func->next = NULL;
function = 0x8;
break;
@@ -339,7 +339,7 @@
}
/*
- * This function configures the pci BARs of a single device.
+ * This function configures the pci BARs of a single device.
* Input: pointer to the pci_func
* Output: configured PCI, 0, or error
*/
@@ -371,17 +371,17 @@
for (count = 0; address[count]; count++) { /* for 6 BARs */
- /* not sure if i need this. per scott, said maybe need smth like this
+ /* not sure if i need this. per scott, said maybe need * something like this
if devices don't adhere 100% to the spec, so don't want to write
to the reserved bits
- pcibios_read_config_byte(cur_func->busno, cur_func->device,
+ pcibios_read_config_byte(cur_func->busno, cur_func->device,
PCI_BASE_ADDRESS_0 + 4 * count, &tmp);
if (tmp & 0x01) // IO
- pcibios_write_config_dword(cur_func->busno, cur_func->device,
+ pcibios_write_config_dword(cur_func->busno, cur_func->device,
PCI_BASE_ADDRESS_0 + 4 * count, 0xFFFFFFFD);
else // Memory
- pcibios_write_config_dword(cur_func->busno, cur_func->device,
+ pcibios_write_config_dword(cur_func->busno, cur_func->device,
PCI_BASE_ADDRESS_0 + 4 * count, 0xFFFFFFFF);
*/
pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF);
@@ -421,8 +421,8 @@
return -EIO;
}
pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], func->io[count]->start);
-
- /* _______________This is for debugging purposes only_____________________ */
+
+ /* _______________This is for debugging purposes only_____________________ */
debug ("b4 writing, the IO address is %x\n", func->io[count]->start);
pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &bar[count]);
debug ("after writing.... the start address is %x\n", bar[count]);
@@ -484,7 +484,7 @@
pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], func->pfmem[count]->start);
- /*_______________This is for debugging purposes only______________________________*/
+ /*_______________This is for debugging purposes only______________________________*/
debug ("b4 writing, start address is %x\n", func->pfmem[count]->start);
pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &bar[count]);
debug ("after writing, start address is %x\n", bar[count]);
@@ -559,7 +559,7 @@
/******************************************************************************
* This routine configures a PCI-2-PCI bridge and the functions behind it
* Parameters: pci_func
- * Returns:
+ * Returns:
******************************************************************************/
static int configure_bridge (struct pci_func **func_passed, u8 slotno)
{
@@ -622,7 +622,7 @@
debug ("AFTER FIND_SEC_NUMBER, func->busno IS %x\n", func->busno);
pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, sec_number);
-
+
/* __________________For debugging purposes only __________________________________
pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_number);
debug ("sec_number after write/read is %x\n", sec_number);
@@ -644,7 +644,7 @@
/* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- !!!!!!!!!!!!!!!NEED TO ADD!!! FAST BACK-TO-BACK ENABLE!!!!!!!!!!!!!!!!!!!!
+ !!!!!!!!!!!!!!!NEED TO ADD!!! FAST BACK-TO-BACK ENABLE!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!*/
@@ -670,7 +670,7 @@
debug ("len[count] in IO = %x\n", len[count]);
bus_io[count] = kzalloc(sizeof(struct resource_node), GFP_KERNEL);
-
+
if (!bus_io[count]) {
err ("out of system memory\n");
retval = -ENOMEM;
@@ -735,7 +735,7 @@
ibmphp_add_pfmem_from_mem (bus_pfmem[count]);
func->pfmem[count] = bus_pfmem[count];
} else {
- err ("cannot allocate requested pfmem for bus %x, device %x, len %x\n",
+ err ("cannot allocate requested pfmem for bus %x, device %x, len %x\n",
func->busno, func->device, len[count]);
kfree (mem_tmp);
kfree (bus_pfmem[count]);
@@ -805,7 +805,7 @@
debug ("amount_needed->mem = %x\n", amount_needed->mem);
debug ("amount_needed->pfmem = %x\n", amount_needed->pfmem);
- if (amount_needed->not_correct) {
+ if (amount_needed->not_correct) {
debug ("amount_needed is not correct\n");
for (count = 0; address[count]; count++) {
/* for 2 BARs */
@@ -830,7 +830,7 @@
} else {
debug ("it wants %x IO behind the bridge\n", amount_needed->io);
io = kzalloc(sizeof(*io), GFP_KERNEL);
-
+
if (!io) {
err ("out of system memory\n");
retval = -ENOMEM;
@@ -959,7 +959,7 @@
if (bus->noIORanges) {
pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_IO_BASE, 0x00 | bus->rangeIO->start >> 8);
- pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_IO_LIMIT, 0x00 | bus->rangeIO->end >> 8);
+ pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_IO_LIMIT, 0x00 | bus->rangeIO->end >> 8);
/* _______________This is for debugging purposes only ____________________
pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_IO_BASE, &temp);
@@ -980,7 +980,7 @@
if (bus->noMemRanges) {
pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_BASE, 0x0000 | bus->rangeMem->start >> 16);
pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_LIMIT, 0x0000 | bus->rangeMem->end >> 16);
-
+
/* ____________________This is for debugging purposes only ________________________
pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_BASE, &temp);
debug ("mem_base = %x\n", (temp & PCI_MEMORY_RANGE_TYPE_MASK) << 16);
@@ -1017,7 +1017,7 @@
pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_INTERRUPT_PIN, &irq);
if ((irq > 0x00) && (irq < 0x05))
pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_INTERRUPT_LINE, func->irq[irq - 1]);
- /*
+ /*
pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, ctrl);
pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, PCI_BRIDGE_CTL_PARITY);
pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, PCI_BRIDGE_CTL_SERR);
@@ -1071,7 +1071,7 @@
* This function adds up the amount of resources needed behind the PPB bridge
* and passes it to the configure_bridge function
* Input: bridge function
- * Ouput: amount of resources needed
+ * Output: amount of resources needed
*****************************************************************************/
static struct res_needed *scan_behind_bridge (struct pci_func * func, u8 busno)
{
@@ -1204,9 +1204,9 @@
return amount;
}
-/* The following 3 unconfigure_boot_ routines deal with the case when we had the card
- * upon bootup in the system, since we don't allocate func to such case, we need to read
- * the start addresses from pci config space and then find the corresponding entries in
+/* The following 3 unconfigure_boot_ routines deal with the case when we had the card
+ * upon bootup in the system, since we don't allocate func to such case, we need to read
+ * the start addresses from pci config space and then find the corresponding entries in
* our resource lists. The functions return either 0, -ENODEV, or -1 (general failure)
* Change: we also call these functions even if we configured the card ourselves (i.e., not
* the bootup case), since it should work same way
@@ -1561,8 +1561,8 @@
* unconfiguring the device
* TO DO: will probably need to add some code in case there was some resource,
* to remove it... this is from when we have errors in the configure_card...
- * !!!!!!!!!!!!!!!!!!!!!!!!!FOR BUSES!!!!!!!!!!!!
- * Returns: 0, -1, -ENODEV
+ * !!!!!!!!!!!!!!!!!!!!!!!!!FOR BUSES!!!!!!!!!!!!
+ * Returns: 0, -1, -ENODEV
*/
int ibmphp_unconfigure_card (struct slot **slot_cur, int the_end)
{
@@ -1634,7 +1634,7 @@
* Input: bus and the amount of resources needed (we know we can assign those,
* since they've been checked already
* Output: bus added to the correct spot
- * 0, -1, error
+ * 0, -1, error
*/
static int add_new_bus (struct bus_node *bus, struct resource_node *io, struct resource_node *mem, struct resource_node *pfmem, u8 parent_busno)
{
@@ -1650,7 +1650,7 @@
err ("strange, cannot find bus which is supposed to be at the system... something is terribly wrong...\n");
return -ENODEV;
}
-
+
list_add (&bus->bus_list, &cur_bus->bus_list);
}
if (io) {
@@ -1679,7 +1679,7 @@
}
if (pfmem) {
pfmem_range = kzalloc(sizeof(*pfmem_range), GFP_KERNEL);
- if (!pfmem_range) {
+ if (!pfmem_range) {
err ("out of system memory\n");
return -ENOMEM;
}
@@ -1726,4 +1726,3 @@
return busno;
return 0xff;
}
-
diff --git a/drivers/pci/hotplug/ibmphp_res.c b/drivers/pci/hotplug/ibmphp_res.c
index e2dc289..a265acb 100644
--- a/drivers/pci/hotplug/ibmphp_res.c
+++ b/drivers/pci/hotplug/ibmphp_res.c
@@ -72,7 +72,7 @@
static struct resource_node * __init alloc_resources (struct ebda_pci_rsrc * curr)
{
struct resource_node *rs;
-
+
if (!curr) {
err ("NULL passed to allocate\n");
return NULL;
@@ -128,7 +128,7 @@
}
newrange->start = curr->start_addr;
newrange->end = curr->end_addr;
-
+
if (first_bus || (!num_ranges))
newrange->rangeno = 1;
else {
@@ -162,7 +162,7 @@
newbus->rangePFMem = newrange;
if (first_bus)
newbus->noPFMemRanges = 1;
- else {
+ else {
debug ("1st PFMemory Primary on Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end);
++newbus->noPFMemRanges;
fix_resources (newbus);
@@ -190,7 +190,7 @@
* This is the Resource Management initialization function. It will go through
* the Resource list taken from EBDA and fill in this module's data structures
*
- * THIS IS NOT TAKING INTO CONSIDERATION IO RESTRICTIONS OF PRIMARY BUSES,
+ * THIS IS NOT TAKING INTO CONSIDERATION IO RESTRICTIONS OF PRIMARY BUSES,
* SINCE WE'RE GOING TO ASSUME FOR NOW WE DON'T HAVE THOSE ON OUR BUSES FOR NOW
*
* Input: ptr to the head of the resource list from EBDA
@@ -382,7 +382,7 @@
* pci devices' resources for the appropriate resource
*
* Input: type of the resource, range to add, current bus
- * Output: 0 or -1, bus and range ptrs
+ * Output: 0 or -1, bus and range ptrs
********************************************************************************/
static int add_bus_range (int type, struct range_node *range, struct bus_node *bus_cur)
{
@@ -466,7 +466,7 @@
switch (type) {
case MEM:
- if (bus_cur->firstMem)
+ if (bus_cur->firstMem)
res = bus_cur->firstMem;
break;
case PFMEM:
@@ -583,7 +583,7 @@
}
/*******************************************************************************
- * This routine adds a resource to the list of resources to the appropriate bus
+ * This routine adds a resource to the list of resources to the appropriate bus
* based on their resource type and sorted by their starting addresses. It assigns
* the ptrs to next and nextRange if needed.
*
@@ -605,11 +605,11 @@
err ("NULL passed to add\n");
return -ENODEV;
}
-
+
bus_cur = find_bus_wprev (res->busno, NULL, 0);
-
+
if (!bus_cur) {
- /* didn't find a bus, smth's wrong!!! */
+ /* didn't find a bus, something's wrong!!! */
debug ("no bus in the system, either pci_dev's wrong or allocation failed\n");
return -ENODEV;
}
@@ -648,7 +648,7 @@
if (!range_cur) {
switch (res->type) {
case IO:
- ++bus_cur->needIOUpdate;
+ ++bus_cur->needIOUpdate;
break;
case MEM:
++bus_cur->needMemUpdate;
@@ -659,13 +659,13 @@
}
res->rangeno = -1;
}
-
+
debug ("The range is %d\n", res->rangeno);
if (!res_start) {
/* no first{IO,Mem,Pfmem} on the bus, 1st IO/Mem/Pfmem resource ever */
switch (res->type) {
case IO:
- bus_cur->firstIO = res;
+ bus_cur->firstIO = res;
break;
case MEM:
bus_cur->firstMem = res;
@@ -673,7 +673,7 @@
case PFMEM:
bus_cur->firstPFMem = res;
break;
- }
+ }
res->next = NULL;
res->nextRange = NULL;
} else {
@@ -770,7 +770,7 @@
* This routine will remove the resource from the list of resources
*
* Input: io, mem, and/or pfmem resource to be deleted
- * Ouput: modified resource list
+ * Output: modified resource list
* 0 or error code
****************************************************************************/
int ibmphp_remove_resource (struct resource_node *res)
@@ -825,7 +825,7 @@
if (!res_cur) {
if (res->type == PFMEM) {
- /*
+ /*
* case where pfmem might be in the PFMemFromMem list
* so will also need to remove the corresponding mem
* entry
@@ -961,12 +961,12 @@
}
/*****************************************************************************
- * This routine will check to make sure the io/mem/pfmem->len that the device asked for
+ * This routine will check to make sure the io/mem/pfmem->len that the device asked for
* can fit w/i our list of available IO/MEM/PFMEM resources. If cannot, returns -EINVAL,
* otherwise, returns 0
*
* Input: resource
- * Ouput: the correct start and end address are inputted into the resource node,
+ * Output: the correct start and end address are inputted into the resource node,
* 0 or -EINVAL
*****************************************************************************/
int ibmphp_check_resource (struct resource_node *res, u8 bridge)
@@ -996,7 +996,7 @@
bus_cur = find_bus_wprev (res->busno, NULL, 0);
if (!bus_cur) {
- /* didn't find a bus, smth's wrong!!! */
+ /* didn't find a bus, something's wrong!!! */
debug ("no bus in the system, either pci_dev's wrong or allocation failed\n");
return -EINVAL;
}
@@ -1066,7 +1066,7 @@
break;
}
}
-
+
if (flag && len_cur == res->len) {
debug ("but we are not here, right?\n");
res->start = start_cur;
@@ -1118,10 +1118,10 @@
if (res_prev) {
if (res_prev->rangeno != res_cur->rangeno) {
/* 1st device on this range */
- if ((res_cur->start != range->start) &&
+ if ((res_cur->start != range->start) &&
((len_tmp = res_cur->start - 1 - range->start) >= res->len)) {
if ((len_tmp < len_cur) || (len_cur == 0)) {
- if ((range->start % tmp_divide) == 0) {
+ if ((range->start % tmp_divide) == 0) {
/* just perfect, starting address is divisible by length */
flag = 1;
len_cur = len_tmp;
@@ -1344,7 +1344,7 @@
* This routine is called from remove_card if the card contained PPB.
* It will remove all the resources on the bus as well as the bus itself
* Input: Bus
- * Ouput: 0, -ENODEV
+ * Output: 0, -ENODEV
********************************************************************************/
int ibmphp_remove_bus (struct bus_node *bus, u8 parent_busno)
{
@@ -1353,7 +1353,7 @@
struct bus_node *prev_bus;
int rc;
- prev_bus = find_bus_wprev (parent_busno, NULL, 0);
+ prev_bus = find_bus_wprev (parent_busno, NULL, 0);
if (!prev_bus) {
debug ("something terribly wrong. Cannot find parent bus to the one to remove\n");
@@ -1424,7 +1424,7 @@
}
/******************************************************************************
- * This routine deletes the ranges from a given bus, and the entries from the
+ * This routine deletes the ranges from a given bus, and the entries from the
* parent's bus in the resources
* Input: current bus, previous bus
* Output: 0, -EINVAL
@@ -1453,7 +1453,7 @@
if (bus_cur->noMemRanges) {
range_cur = bus_cur->rangeMem;
for (i = 0; i < bus_cur->noMemRanges; i++) {
- if (ibmphp_find_resource (bus_prev, range_cur->start, &res, MEM) < 0)
+ if (ibmphp_find_resource (bus_prev, range_cur->start, &res, MEM) < 0)
return -EINVAL;
ibmphp_remove_resource (res);
@@ -1467,7 +1467,7 @@
if (bus_cur->noPFMemRanges) {
range_cur = bus_cur->rangePFMem;
for (i = 0; i < bus_cur->noPFMemRanges; i++) {
- if (ibmphp_find_resource (bus_prev, range_cur->start, &res, PFMEM) < 0)
+ if (ibmphp_find_resource (bus_prev, range_cur->start, &res, PFMEM) < 0)
return -EINVAL;
ibmphp_remove_resource (res);
@@ -1482,7 +1482,7 @@
}
/*
- * find the resource node in the bus
+ * find the resource node in the bus
* Input: Resource needed, start address of the resource, type of resource
*/
int ibmphp_find_resource (struct bus_node *bus, u32 start_address, struct resource_node **res, int flag)
@@ -1512,7 +1512,7 @@
err ("wrong type of flag\n");
return -EINVAL;
}
-
+
while (res_cur) {
if (res_cur->start == start_address) {
*res = res_cur;
@@ -1718,7 +1718,7 @@
} /* end for pfmem */
} /* end if */
} /* end list_for_each bus */
- return 0;
+ return 0;
}
int ibmphp_add_pfmem_from_mem (struct resource_node *pfmem)
@@ -1760,9 +1760,9 @@
list_for_each (tmp, &gbuses) {
tmp_prev = tmp->prev;
bus_cur = list_entry (tmp, struct bus_node, bus_list);
- if (flag)
+ if (flag)
*prev = list_entry (tmp_prev, struct bus_node, bus_list);
- if (bus_cur->busno == bus_number)
+ if (bus_cur->busno == bus_number)
return bus_cur;
}
@@ -1776,7 +1776,7 @@
struct range_node *range;
struct resource_node *res;
struct list_head *tmp;
-
+
debug_pci ("*****************START**********************\n");
if ((!list_empty(&gbuses)) && flags) {
@@ -1906,7 +1906,7 @@
return 1;
range_cur = range_cur->next;
}
-
+
return 0;
}
@@ -1920,7 +1920,7 @@
* Returns: none
* Note: this function doesn't take into account IO restrictions etc,
* so will only work for bridges with no video/ISA devices behind them It
- * also will not work for onboard PPB's that can have more than 1 *bus
+ * also will not work for onboard PPBs that can have more than 1 *bus
* behind them All these are TO DO.
* Also need to add more error checkings... (from fnc returns etc)
*/
@@ -1963,7 +1963,7 @@
case PCI_HEADER_TYPE_BRIDGE:
function = 0x8;
case PCI_HEADER_TYPE_MULTIBRIDGE:
- /* We assume here that only 1 bus behind the bridge
+ /* We assume here that only 1 bus behind the bridge
TO DO: add functionality for several:
temp = secondary;
while (temp < subordinate) {
@@ -1972,7 +1972,7 @@
}
*/
pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_busno);
- bus_sec = find_bus_wprev (sec_busno, NULL, 0);
+ bus_sec = find_bus_wprev (sec_busno, NULL, 0);
/* this bus structure doesn't exist yet, PPB was configured during previous loading of ibmphp */
if (!bus_sec) {
bus_sec = alloc_error_bus (NULL, sec_busno, 1);
@@ -2028,7 +2028,7 @@
io->len = io->end - io->start + 1;
ibmphp_add_resource (io);
}
- }
+ }
pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_BASE, &start_mem_address);
pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_LIMIT, &end_mem_address);
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index ec20f74..cfa92a9 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -131,7 +131,7 @@
}
module_put(slot->ops->owner);
-exit:
+exit:
if (retval)
return retval;
return count;
@@ -177,7 +177,7 @@
retval = ops->set_attention_status(slot->hotplug, attention);
module_put(ops->owner);
-exit:
+exit:
if (retval)
return retval;
return count;
@@ -247,7 +247,7 @@
retval = slot->ops->hardware_test(slot, test);
module_put(slot->ops->owner);
-exit:
+exit:
if (retval)
return retval;
return count;
@@ -512,7 +512,7 @@
* @hotplug: pointer to the slot whose info has changed
* @info: pointer to the info copy into the slot's info structure
*
- * @slot must have been registered with the pci
+ * @slot must have been registered with the pci
* hotplug subsystem previously with a call to pci_hp_register().
*
* Returns 0 if successful, anything else for an error.
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index 541bbe6..21e865d 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -180,5 +180,5 @@
{
return 0;
}
-#endif /* CONFIG_ACPI */
+#endif /* CONFIG_ACPI */
#endif /* _PCIEHP_H */
diff --git a/drivers/pci/hotplug/pciehp_acpi.c b/drivers/pci/hotplug/pciehp_acpi.c
index cff7cad..eddddd4 100644
--- a/drivers/pci/hotplug/pciehp_acpi.c
+++ b/drivers/pci/hotplug/pciehp_acpi.c
@@ -78,7 +78,7 @@
static int __initdata acpi_slot_detected;
static struct list_head __initdata dummy_slots = LIST_HEAD_INIT(dummy_slots);
-/* Dummy driver for dumplicate name detection */
+/* Dummy driver for duplicate name detection */
static int __init dummy_probe(struct pcie_device *dev)
{
u32 slot_cap;
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index f4a18f5..bbd48bb 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -351,8 +351,8 @@
pciehp_firmware_init();
retval = pcie_port_service_register(&hpdriver_portdrv);
- dbg("pcie_port_service_register = %d\n", retval);
- info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
+ dbg("pcie_port_service_register = %d\n", retval);
+ info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
if (retval)
dbg("Failure to register service\n");
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 51f56ef..3eea3fd 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -92,7 +92,7 @@
{
/* Clamp to sane value */
if ((sec <= 0) || (sec > 60))
- sec = 2;
+ sec = 2;
ctrl->poll_timer.function = &int_poll_timeout;
ctrl->poll_timer.data = (unsigned long)ctrl;
@@ -194,7 +194,7 @@
ctrl_dbg(ctrl, "CMD_COMPLETED not clear after 1 sec\n");
} else if (!NO_CMD_CMPL(ctrl)) {
/*
- * This controller semms to notify of command completed
+ * This controller seems to notify of command completed
* event even though it supports none of power
* controller, attention led, power led and EMI.
*/
@@ -926,7 +926,7 @@
if (pciehp_writew(ctrl, PCI_EXP_SLTSTA, 0x1f))
goto abort_ctrl;
- /* Disable sotfware notification */
+ /* Disable software notification */
pcie_disable_notification(ctrl);
ctrl_info(ctrl, "HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n",
diff --git a/drivers/pci/hotplug/pcihp_skeleton.c b/drivers/pci/hotplug/pcihp_skeleton.c
index 1f00b93..ac69094 100644
--- a/drivers/pci/hotplug/pcihp_skeleton.c
+++ b/drivers/pci/hotplug/pcihp_skeleton.c
@@ -52,7 +52,7 @@
do { \
if (debug) \
printk (KERN_DEBUG "%s: " format "\n", \
- MY_NAME , ## arg); \
+ MY_NAME , ## arg); \
} while (0)
#define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
#define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)
@@ -287,7 +287,7 @@
hotplug_slot->release = &release_slot;
make_slot_name(slot);
hotplug_slot->ops = &skel_hotplug_slot_ops;
-
+
/*
* Initialize the slot info structure with some known
* good values.
@@ -296,7 +296,7 @@
get_attention_status(hotplug_slot, &info->attention_status);
get_latch_status(hotplug_slot, &info->latch_status);
get_adapter_status(hotplug_slot, &info->adapter_status);
-
+
dbg("registering slot %d\n", i);
retval = pci_hp_register(slot->hotplug_slot);
if (retval) {
@@ -336,7 +336,7 @@
pci_hp_deregister(slot->hotplug_slot);
}
}
-
+
static int __init pcihp_skel_init(void)
{
int retval;
diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c
index bb7af78..e9c044d 100644
--- a/drivers/pci/hotplug/rpadlpar_core.c
+++ b/drivers/pci/hotplug/rpadlpar_core.c
@@ -217,7 +217,7 @@
if (!pcibios_find_pci_bus(dn))
return -EINVAL;
- /* If pci slot is hotplugable, use hotplug to remove it */
+ /* If pci slot is hotpluggable, use hotplug to remove it */
slot = find_php_slot(dn);
if (slot && rpaphp_deregister_slot(slot)) {
printk(KERN_ERR "%s: unable to remove hotplug slot %s\n",
diff --git a/drivers/pci/hotplug/rpaphp.h b/drivers/pci/hotplug/rpaphp.h
index 3135856..b2593e8 100644
--- a/drivers/pci/hotplug/rpaphp.h
+++ b/drivers/pci/hotplug/rpaphp.h
@@ -49,9 +49,9 @@
extern bool rpaphp_debug;
#define dbg(format, arg...) \
do { \
- if (rpaphp_debug) \
+ if (rpaphp_debug) \
printk(KERN_DEBUG "%s: " format, \
- MY_NAME , ## arg); \
+ MY_NAME , ## arg); \
} while (0)
#define err(format, arg...) printk(KERN_ERR "%s: " format, MY_NAME , ## arg)
#define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME , ## arg)
@@ -99,5 +99,5 @@
struct slot *alloc_slot_struct(struct device_node *dn, int drc_index, char *drc_name, int power_domain);
int rpaphp_register_slot(struct slot *slot);
int rpaphp_deregister_slot(struct slot *slot);
-
+
#endif /* _PPC64PHP_H */
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index 127d6e6..b7fc5c9 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -226,7 +226,7 @@
for (i = 0; i < indexes[0]; i++) {
if ((unsigned int) indexes[i + 1] == *my_index) {
if (drc_name)
- *drc_name = name_tmp;
+ *drc_name = name_tmp;
if (drc_type)
*drc_type = type_tmp;
if (drc_index)
@@ -289,7 +289,7 @@
* rpaphp_add_slot -- declare a hotplug slot to the hotplug subsystem.
* @dn: device node of slot
*
- * This subroutine will register a hotplugable slot with the
+ * This subroutine will register a hotpluggable slot with the
* PCI hotplug infrastructure. This routine is typically called
* during boot time, if the hotplug slots are present at boot time,
* or is called later, by the dlpar add code, if the slot is
@@ -328,7 +328,7 @@
return -ENOMEM;
slot->type = simple_strtoul(type, NULL, 10);
-
+
dbg("Found drc-index:0x%x drc-name:%s drc-type:%s\n",
indexes[i + 1], name, type);
@@ -356,7 +356,7 @@
/*
* Unregister all of our slots with the pci_hotplug subsystem,
* and free up all memory that we had allocated.
- * memory will be freed in release_slot callback.
+ * memory will be freed in release_slot callback.
*/
list_for_each_safe(tmp, n, &rpaphp_slot_head) {
diff --git a/drivers/pci/hotplug/rpaphp_pci.c b/drivers/pci/hotplug/rpaphp_pci.c
index 513e1e2..9243f3e7 100644
--- a/drivers/pci/hotplug/rpaphp_pci.c
+++ b/drivers/pci/hotplug/rpaphp_pci.c
@@ -44,7 +44,7 @@
dbg("%s: slot must be power up to get sensor-state\n",
__func__);
- /* some slots have to be powered up
+ /* some slots have to be powered up
* before get-sensor will succeed.
*/
rc = rtas_set_power_level(slot->power_domain, POWER_ON,
@@ -133,4 +133,3 @@
return 0;
}
-
diff --git a/drivers/pci/hotplug/rpaphp_slot.c b/drivers/pci/hotplug/rpaphp_slot.c
index b283bbe..a6082cc 100644
--- a/drivers/pci/hotplug/rpaphp_slot.c
+++ b/drivers/pci/hotplug/rpaphp_slot.c
@@ -1,5 +1,5 @@
/*
- * RPA Virtual I/O device functions
+ * RPA Virtual I/O device functions
* Copyright (C) 2004 Linda Xie <lxie@us.ibm.com>
*
* All rights reserved.
@@ -51,27 +51,27 @@
int drc_index, char *drc_name, int power_domain)
{
struct slot *slot;
-
+
slot = kzalloc(sizeof(struct slot), GFP_KERNEL);
if (!slot)
goto error_nomem;
slot->hotplug_slot = kzalloc(sizeof(struct hotplug_slot), GFP_KERNEL);
if (!slot->hotplug_slot)
- goto error_slot;
+ goto error_slot;
slot->hotplug_slot->info = kzalloc(sizeof(struct hotplug_slot_info),
GFP_KERNEL);
if (!slot->hotplug_slot->info)
goto error_hpslot;
slot->name = kstrdup(drc_name, GFP_KERNEL);
if (!slot->name)
- goto error_info;
+ goto error_info;
slot->dn = dn;
slot->index = drc_index;
slot->power_domain = power_domain;
slot->hotplug_slot->private = slot;
slot->hotplug_slot->ops = &rpaphp_hotplug_slot_ops;
slot->hotplug_slot->release = &rpaphp_release_slot;
-
+
return (slot);
error_info:
@@ -91,7 +91,7 @@
list_for_each_entry(tmp_slot, &rpaphp_slot_head, rpaphp_slot_list) {
if (!strcmp(tmp_slot->name, slot->name))
return 1;
- }
+ }
return 0;
}
@@ -104,7 +104,7 @@
__func__, slot->name);
list_del(&slot->rpaphp_slot_list);
-
+
retval = pci_hp_deregister(php_slot);
if (retval)
err("Problem unregistering a slot %s\n", slot->name);
@@ -120,7 +120,7 @@
int retval;
int slotno;
- dbg("%s registering slot:path[%s] index[%x], name[%s] pdomain[%x] type[%d]\n",
+ dbg("%s registering slot:path[%s] index[%x], name[%s] pdomain[%x] type[%d]\n",
__func__, slot->dn->full_name, slot->index, slot->name,
slot->power_domain, slot->type);
@@ -128,7 +128,7 @@
if (is_registered(slot)) {
err("rpaphp_register_slot: slot[%s] is already registered\n", slot->name);
return -EAGAIN;
- }
+ }
if (slot->dn->child)
slotno = PCI_SLOT(PCI_DN(slot->dn->child)->devfn);
@@ -145,4 +145,3 @@
info("Slot [%s] registered\n", slot->name);
return 0;
}
-
diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h
index d876e4b..6152909 100644
--- a/drivers/pci/hotplug/shpchp.h
+++ b/drivers/pci/hotplug/shpchp.h
@@ -216,13 +216,13 @@
/* offsets to the controller registers based on the above structure layout */
enum ctrl_offsets {
- BASE_OFFSET = offsetof(struct ctrl_reg, base_offset),
- SLOT_AVAIL1 = offsetof(struct ctrl_reg, slot_avail1),
+ BASE_OFFSET = offsetof(struct ctrl_reg, base_offset),
+ SLOT_AVAIL1 = offsetof(struct ctrl_reg, slot_avail1),
SLOT_AVAIL2 = offsetof(struct ctrl_reg, slot_avail2),
- SLOT_CONFIG = offsetof(struct ctrl_reg, slot_config),
+ SLOT_CONFIG = offsetof(struct ctrl_reg, slot_config),
SEC_BUS_CONFIG = offsetof(struct ctrl_reg, sec_bus_config),
MSI_CTRL = offsetof(struct ctrl_reg, msi_ctrl),
- PROG_INTERFACE = offsetof(struct ctrl_reg, prog_interface),
+ PROG_INTERFACE = offsetof(struct ctrl_reg, prog_interface),
CMD = offsetof(struct ctrl_reg, cmd),
CMD_STATUS = offsetof(struct ctrl_reg, cmd_status),
INTR_LOC = offsetof(struct ctrl_reg, intr_loc),
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index d3f757d..faf13ab 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -143,11 +143,11 @@
snprintf(name, SLOT_NAME_SIZE, "%d", slot->number);
hotplug_slot->ops = &shpchp_hotplug_slot_ops;
- ctrl_dbg(ctrl, "Registering domain:bus:dev=%04x:%02x:%02x "
- "hp_slot=%x sun=%x slot_device_offset=%x\n",
- pci_domain_nr(ctrl->pci_dev->subordinate),
- slot->bus, slot->device, slot->hp_slot, slot->number,
- ctrl->slot_device_offset);
+ ctrl_dbg(ctrl, "Registering domain:bus:dev=%04x:%02x:%02x "
+ "hp_slot=%x sun=%x slot_device_offset=%x\n",
+ pci_domain_nr(ctrl->pci_dev->subordinate),
+ slot->bus, slot->device, slot->hp_slot, slot->number,
+ ctrl->slot_device_offset);
retval = pci_hp_register(slot->hotplug_slot,
ctrl->pci_dev->subordinate, slot->device, name);
if (retval) {
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 75ba231..2d7f474 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -116,7 +116,7 @@
#define SLOT_REG_RSVDZ_MASK ((1 << 15) | (7 << 21))
/*
- * SHPC Command Code definitnions
+ * SHPC Command Code definitions
*
* Slot Operation 00h - 3Fh
* Set Bus Segment Speed/Mode A 40h - 47h
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 21a7182..1fe2d6f 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -610,7 +610,7 @@
struct resource tmp;
enum pci_bar_type type;
int reg = pci_iov_resource_bar(dev, resno, &type);
-
+
if (!reg)
return 0;
diff --git a/drivers/pci/irq.c b/drivers/pci/irq.c
index b008cf8..6684f15 100644
--- a/drivers/pci/irq.c
+++ b/drivers/pci/irq.c
@@ -25,7 +25,7 @@
/**
* pci_lost_interrupt - reports a lost PCI interrupt
* @pdev: device whose interrupt is lost
- *
+ *
* The primary function of this routine is to report a lost interrupt
* in a standard way which users can recognise (instead of blaming the
* driver).
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 5e63645..3fcd67a 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -784,7 +784,7 @@
* @nvec: how many MSIs have been requested ?
* @type: are we checking for MSI or MSI-X ?
*
- * Look at global flags, the device itself, and its parent busses
+ * Look at global flags, the device itself, and its parent buses
* to determine if MSI/-X are supported for the device. If MSI/-X is
* supported return 0, else return an error code.
**/
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index f166126..577074e 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -141,7 +141,7 @@
* if (_PRW at S-state x)
* choose from highest power _SxD to lowest power _SxW
* else // no _PRW at S-state x
- * choose highest power _SxD or any lower power
+ * choose highest power _SxD or any lower power
*/
static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev)
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 4548535..9042fdb 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -312,7 +312,7 @@
* __pci_device_probe - check if a driver wants to claim a specific PCI device
* @drv: driver to call to check if it wants the PCI device
* @pci_dev: PCI device being probed
- *
+ *
* returns 0 on success, else error.
* side-effect: pci_dev->driver is set to drv when drv claims pci_dev.
*/
@@ -378,7 +378,7 @@
* We would love to complain here if pci_dev->is_enabled is set, that
* the driver should have called pci_disable_device(), but the
* unfortunate fact is there are too many odd BIOS and bridge setups
- * that don't like drivers doing that all of the time.
+ * that don't like drivers doing that all of the time.
* Oh well, we can dream of sane hardware when we sleep, no matter how
* horrible the crap we have to deal with is when we are awake...
*/
@@ -1156,10 +1156,10 @@
* @drv: the driver structure to register
* @owner: owner module of drv
* @mod_name: module name string
- *
+ *
* Adds the driver structure to the list of registered drivers.
- * Returns a negative value on error, otherwise 0.
- * If no error occurred, the driver remains registered even if
+ * Returns a negative value on error, otherwise 0.
+ * If no error occurred, the driver remains registered even if
* no device was claimed during registration.
*/
int __pci_register_driver(struct pci_driver *drv, struct module *owner,
@@ -1181,7 +1181,7 @@
/**
* pci_unregister_driver - unregister a pci driver
* @drv: the driver structure to unregister
- *
+ *
* Deletes the driver structure from the list of registered PCI drivers,
* gives it a chance to clean up by calling its remove() function for
* each device it was responsible for, and marks those devices as
@@ -1203,7 +1203,7 @@
* pci_dev_driver - get the pci_driver of a device
* @dev: the device to query
*
- * Returns the appropriate pci_driver structure or %NULL if there is no
+ * Returns the appropriate pci_driver structure or %NULL if there is no
* registered driver for the device.
*/
struct pci_driver *
@@ -1224,7 +1224,7 @@
* pci_bus_match - Tell if a PCI device structure has a matching PCI device id structure
* @dev: the PCI device structure to match against
* @drv: the device driver to search for matching PCI device id structures
- *
+ *
* Used by a driver to check whether a PCI device present in the
* system is in its list of supported devices. Returns the matching
* pci_device_id structure or %NULL if there is no match.
diff --git a/drivers/pci/pci-stub.c b/drivers/pci/pci-stub.c
index 6e47c51..2ff7750 100644
--- a/drivers/pci/pci-stub.c
+++ b/drivers/pci/pci-stub.c
@@ -2,13 +2,13 @@
*
* Copyright (C) 2008 Red Hat, Inc.
* Author:
- * Chris Wright
+ * Chris Wright
*
* This work is licensed under the terms of the GNU GPL, version 2.
*
* Usage is simple, allocate a new id to the stub driver and bind the
* device to it. For example:
- *
+ *
* # echo "8086 10f5" > /sys/bus/pci/drivers/pci-stub/new_id
* # echo -n 0000:00:19.0 > /sys/bus/pci/drivers/e1000e/unbind
* # echo -n 0000:00:19.0 > /sys/bus/pci/drivers/pci-stub/bind
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 2aaa83c..c91e6c1 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -10,7 +10,7 @@
*
* File attributes for PCI devices
*
- * Modeled after usb's driverfs.c
+ * Modeled after usb's driverfs.c
*
*/
@@ -270,13 +270,17 @@
if (kstrtoul(buf, 0, &val) < 0)
return -EINVAL;
- /* bad things may happen if the no_msi flag is changed
- * while some drivers are loaded */
+ /*
+ * Bad things may happen if the no_msi flag is changed
+ * while drivers are loaded.
+ */
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- /* Maybe pci devices without subordinate busses shouldn't even have this
- * attribute in the first place? */
+ /*
+ * Maybe devices without subordinate buses shouldn't have this
+ * attribute in the first place?
+ */
if (!pdev->subordinate)
return count;
@@ -670,7 +674,7 @@
size = dev->cfg_size - off;
count = size;
}
-
+
pci_config_pm_runtime_get(dev);
if ((off & 1) && size) {
@@ -678,7 +682,7 @@
off++;
size--;
}
-
+
if ((off & 3) && size > 2) {
u16 val = data[off - init_off];
val |= (u16) data[off - init_off + 1] << 8;
@@ -696,7 +700,7 @@
off += 4;
size -= 4;
}
-
+
if (size >= 2) {
u16 val = data[off - init_off];
val |= (u16) data[off - init_off + 1] << 8;
@@ -1229,21 +1233,21 @@
if (!pdev->rom_attr_enabled)
return -EINVAL;
-
+
rom = pci_map_rom(pdev, &size); /* size starts out as PCI window size */
if (!rom || !size)
return -EIO;
-
+
if (off >= size)
count = 0;
else {
if (off + count > size)
count = size - off;
-
+
memcpy_fromio(buf, rom + off, count);
}
pci_unmap_rom(pdev, rom);
-
+
return count;
}
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index b127fbda..33120d1 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -198,7 +198,7 @@
}
/**
- * pci_find_capability - query for devices' capabilities
+ * pci_find_capability - query for devices' capabilities
* @dev: PCI device to query
* @cap: capability code
*
@@ -207,12 +207,12 @@
* device's PCI configuration space or 0 in case the device does not
* support it. Possible values for @cap:
*
- * %PCI_CAP_ID_PM Power Management
- * %PCI_CAP_ID_AGP Accelerated Graphics Port
- * %PCI_CAP_ID_VPD Vital Product Data
- * %PCI_CAP_ID_SLOTID Slot Identification
+ * %PCI_CAP_ID_PM Power Management
+ * %PCI_CAP_ID_AGP Accelerated Graphics Port
+ * %PCI_CAP_ID_VPD Vital Product Data
+ * %PCI_CAP_ID_SLOTID Slot Identification
* %PCI_CAP_ID_MSI Message Signalled Interrupts
- * %PCI_CAP_ID_CHSWP CompactPCI HotSwap
+ * %PCI_CAP_ID_CHSWP CompactPCI HotSwap
* %PCI_CAP_ID_PCIX PCI-X
* %PCI_CAP_ID_EXP PCI Express
*/
@@ -228,13 +228,13 @@
}
/**
- * pci_bus_find_capability - query for devices' capabilities
+ * pci_bus_find_capability - query for devices' capabilities
* @bus: the PCI bus to query
* @devfn: PCI device to query
* @cap: capability code
*
* Like pci_find_capability() but works for pci devices that do not have a
- * pci_dev structure set up yet.
+ * pci_dev structure set up yet.
*
* Returns the address of the requested capability structure within the
* device's PCI configuration space or 0 in case the device does not
@@ -515,7 +515,7 @@
return -EINVAL;
/* Validate current state:
- * Can enter D0 from any state, but if we can only go deeper
+ * Can enter D0 from any state, but if we can only go deeper
* to sleep if we're already in a low power state
*/
if (state != PCI_D0 && dev->current_state <= PCI_D3cold
@@ -998,7 +998,7 @@
}
}
-/**
+/**
* pci_restore_state - Restore the saved state of a PCI device
* @dev: - PCI device that we're dealing with
*/
@@ -1030,7 +1030,7 @@
* the device saved state.
* @dev: PCI device that we're dealing with
*
- * Rerturn NULL if no state or error.
+ * Return NULL if no state or error.
*/
struct pci_saved_state *pci_store_saved_state(struct pci_dev *dev)
{
@@ -1880,7 +1880,7 @@
* pci_dev_run_wake - Check if device can generate run-time wake-up events.
* @dev: Device to check.
*
- * Return true if the device itself is cabable of generating wake-up events
+ * Return true if the device itself is capable of generating wake-up events
* (through the platform or using the native PCIe PME) or if the device supports
* PME and one of its upstream bridges can generate wake-up events.
*/
@@ -2447,7 +2447,7 @@
switch (pci_pcie_type(pdev)) {
/*
* PCI/X-to-PCIe bridges are not specifically mentioned by the spec,
- * but since their primary inteface is PCI/X, we conservatively
+ * but since their primary interface is PCI/X, we conservatively
* handle them as we would a non-PCIe device.
*/
case PCI_EXP_TYPE_PCIE_BRIDGE:
@@ -2471,7 +2471,7 @@
/*
* PCIe 3.0, 6.12.1.2 specifies ACS capabilities that should be
* implemented by the remaining PCIe types to indicate peer-to-peer
- * capabilities, but only when they are part of a multifunciton
+ * capabilities, but only when they are part of a multifunction
* device. The footnote for section 6.12 indicates the specific
* PCIe types included here.
*/
@@ -2486,7 +2486,7 @@
}
/*
- * PCIe 3.0, 6.12.1.3 specifies no ACS capabilties are applicable
+ * PCIe 3.0, 6.12.1.3 specifies no ACS capabilities are applicable
* to single function devices with the exception of downstream ports.
*/
return true;
@@ -2622,7 +2622,7 @@
*
* If @exclusive is set, then the region is marked so that userspace
* is explicitly not allowed to map the resource via /dev/mem or
- * sysfs MMIO access.
+ * sysfs MMIO access.
*
* Returns 0 on success, or %EBUSY on error. A warning
* message is also printed on failure.
@@ -2634,7 +2634,7 @@
if (pci_resource_len(pdev, bar) == 0)
return 0;
-
+
if (pci_resource_flags(pdev, bar) & IORESOURCE_IO) {
if (!request_region(pci_resource_start(pdev, bar),
pci_resource_len(pdev, bar), res_name))
@@ -2694,7 +2694,7 @@
*
* The key difference that _exclusive makes it that userspace is
* explicitly not allowed to map the resource via /dev/mem or
- * sysfs.
+ * sysfs.
*/
int pci_request_region_exclusive(struct pci_dev *pdev, int bar, const char *res_name)
{
@@ -2799,7 +2799,7 @@
* successfully.
*
* pci_request_regions_exclusive() will mark the region so that
- * /dev/mem and the sysfs MMIO access will not be allowed.
+ * /dev/mem and the sysfs MMIO access will not be allowed.
*
* Returns 0 on success, or %EBUSY on error. A warning
* message is also printed on failure.
@@ -2967,7 +2967,7 @@
cmd |= PCI_COMMAND_INVALIDATE;
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
-
+
return 0;
}
@@ -3292,7 +3292,7 @@
*
* NOTE: This causes the caller to sleep for twice the device power transition
* cooldown period, which for the D0->D3hot and D3hot->D0 transitions is 10 ms
- * by devault (i.e. unless the @dev's d3_delay field has a different value).
+ * by default (i.e. unless the @dev's d3_delay field has a different value).
* Moreover, only devices in D0 can be reset by this function.
*/
static int pci_pm_reset(struct pci_dev *dev, int probe)
@@ -3341,7 +3341,7 @@
pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
/*
* PCI spec v3.0 7.6.4.2 requires minimum Trst of 1ms. Double
- * this to 2ms to ensure that we meet the minium requirement.
+ * this to 2ms to ensure that we meet the minimum requirement.
*/
msleep(2);
@@ -3998,7 +3998,7 @@
return -EINVAL;
v = ffs(mps) - 8;
- if (v > dev->pcie_mpss)
+ if (v > dev->pcie_mpss)
return -EINVAL;
v <<= 5;
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index 6b3a958..b2c8881 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -525,7 +525,7 @@
if (info->severity == AER_CORRECTABLE) {
/*
- * Correctable error does not need software intevention.
+ * Correctable error does not need software intervention.
* No need to go through error recovery process.
*/
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 403a443..f1272dc 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -548,7 +548,7 @@
/*
* pcie_aspm_init_link_state: Initiate PCI express link state.
- * It is called after the pcie and its children devices are scaned.
+ * It is called after the pcie and its children devices are scanned.
* @pdev: the root port or switch downstream port
*/
void pcie_aspm_init_link_state(struct pci_dev *pdev)
diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c
index e56e594..bbc3bdd 100644
--- a/drivers/pci/pcie/pme.c
+++ b/drivers/pci/pcie/pme.c
@@ -419,8 +419,8 @@
static struct pcie_port_service_driver pcie_pme_driver = {
.name = "pcie_pme",
- .port_type = PCI_EXP_TYPE_ROOT_PORT,
- .service = PCIE_PORT_SERVICE_PME,
+ .port_type = PCI_EXP_TYPE_ROOT_PORT,
+ .service = PCIE_PORT_SERVICE_PME,
.probe = pcie_pme_probe,
.suspend = pcie_pme_suspend,
diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h
index d2eb80a..d525548 100644
--- a/drivers/pci/pcie/portdrv.h
+++ b/drivers/pci/pcie/portdrv.h
@@ -14,7 +14,7 @@
#define PCIE_PORT_DEVICE_MAXSERVICES 4
/*
* According to the PCI Express Base Specification 2.0, the indices of
- * the MSI-X table entires used by port services must not exceed 31
+ * the MSI-X table entries used by port services must not exceed 31
*/
#define PCIE_PORT_MAX_MSIX_ENTRIES 32
diff --git a/drivers/pci/pcie/portdrv_bus.c b/drivers/pci/pcie/portdrv_bus.c
index 67be55a..87e79a6 100644
--- a/drivers/pci/pcie/portdrv_bus.c
+++ b/drivers/pci/pcie/portdrv_bus.c
@@ -18,8 +18,8 @@
static int pcie_port_bus_match(struct device *dev, struct device_driver *drv);
struct bus_type pcie_port_bus_type = {
- .name = "pci_express",
- .match = pcie_port_bus_match,
+ .name = "pci_express",
+ .match = pcie_port_bus_match,
};
EXPORT_SYMBOL_GPL(pcie_port_bus_type);
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index 08d131f..0b6e766 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -46,7 +46,7 @@
* pcie_port_msix_add_entry - add entry to given array of MSI-X entries
* @entries: Array of MSI-X entries
* @new_entry: Index of the entry to add to the array
- * @nr_entries: Number of entries aleady in the array
+ * @nr_entries: Number of entries already in the array
*
* Return value: Position of the added entry in the array
*/
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 696caed..0d8fdc4 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -223,7 +223,6 @@
static void pcie_portdrv_remove(struct pci_dev *dev)
{
pcie_port_device_remove(dev);
- pci_disable_device(dev);
}
static int error_detected_iter(struct device *device, void *data)
@@ -390,9 +389,9 @@
.probe = pcie_portdrv_probe,
.remove = pcie_portdrv_remove,
- .err_handler = &pcie_portdrv_err_handler,
+ .err_handler = &pcie_portdrv_err_handler,
- .driver.pm = PCIE_PORTDRV_PM_OPS,
+ .driver.pm = PCIE_PORTDRV_PM_OPS,
};
static int __init dmi_pcie_pme_disable_msi(const struct dmi_system_id *d)
@@ -412,7 +411,7 @@
.ident = "MSI Wind U-100",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR,
- "MICRO-STAR INTERNATIONAL CO., LTD"),
+ "MICRO-STAR INTERNATIONAL CO., LTD"),
DMI_MATCH(DMI_PRODUCT_NAME, "U-100"),
},
},
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 5e14f5a..38e403d 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -582,7 +582,7 @@
index = 1;
else
goto out;
-
+
if (agp3) {
index += 2;
if (index == 5)
@@ -789,7 +789,7 @@
}
/* Disable MasterAbortMode during probing to avoid reporting
- of bus errors (in some architectures) */
+ of bus errors (in some architectures) */
pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl);
pci_write_config_word(dev, PCI_BRIDGE_CONTROL,
bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);
@@ -1005,7 +1005,7 @@
* pci_setup_device - fill in class and map information of a device
* @dev: the device structure to fill
*
- * Initialize the device structure with information about the device's
+ * Initialize the device structure with information about the device's
* vendor,class,memory and IO-space addresses,IRQ lines etc.
* Called at initialisation of the PCI subsystem and by CardBus services.
* Returns 0 on success and negative if unknown type of device (not normal,
@@ -1111,7 +1111,7 @@
goto bad;
/* The PCI-to-PCI bridge spec requires that subtractive
decoding (i.e. transparent) bridge must have programming
- interface code of 0x01. */
+ interface code of 0x01. */
pci_read_irq(dev);
dev->transparent = ((dev->class & 0xff) == 1);
pci_read_bases(dev, 2, PCI_ROM_ADDRESS1);
@@ -1570,7 +1570,7 @@
* subsequent read will verify if the value is acceptable or not.
* If the MRRS value provided is not acceptable (e.g., too large),
* shrink the value until it is acceptable to the HW.
- */
+ */
while (mrrs != pcie_get_readrq(dev) && mrrs >= 128) {
rc = pcie_set_readrq(dev, mrrs);
if (!rc)
diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c
index cdc7836..46d1378 100644
--- a/drivers/pci/proc.c
+++ b/drivers/pci/proc.c
@@ -222,7 +222,7 @@
default:
ret = -EINVAL;
break;
- };
+ }
return ret;
}
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 9149045..b3b1b9a 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -55,7 +55,7 @@
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR,quirk_mellanox_tavor);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE,quirk_mellanox_tavor);
-/* Deal with broken BIOS'es that neglect to enable passive release,
+/* Deal with broken BIOSes that neglect to enable passive release,
which can cause problems in combination with the 82441FX/PPro MTRRs */
static void quirk_passive_release(struct pci_dev *dev)
{
@@ -78,11 +78,11 @@
/* The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a workaround
but VIA don't answer queries. If you happen to have good contacts at VIA
- ask them for me please -- Alan
-
- This appears to be BIOS not version dependent. So presumably there is a
+ ask them for me please -- Alan
+
+ This appears to be BIOS not version dependent. So presumably there is a
chipset level fix */
-
+
static void quirk_isa_dma_hangs(struct pci_dev *dev)
{
if (!isa_dma_bridge_buggy) {
@@ -97,7 +97,7 @@
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_isa_dma_hangs);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596, quirk_isa_dma_hangs);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, quirk_isa_dma_hangs);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, quirk_isa_dma_hangs);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, quirk_isa_dma_hangs);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_1, quirk_isa_dma_hangs);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_dma_hangs);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs);
@@ -157,10 +157,10 @@
pci_pci_problems |= PCIPCI_TRITON;
}
}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, quirk_triton);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437VX, quirk_triton);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439, quirk_triton);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quirk_triton);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, quirk_triton);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437VX, quirk_triton);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439, quirk_triton);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quirk_triton);
/*
* VIA Apollo KT133 needs PCI latency patch
@@ -171,7 +171,7 @@
* the info on which Mr Breese based his work.
*
* Updated based on further information from the site and also on
- * information provided by VIA
+ * information provided by VIA
*/
static void quirk_vialatency(struct pci_dev *dev)
{
@@ -179,7 +179,7 @@
u8 busarb;
/* Ok we have a potential problem chipset here. Now see if we have
a buggy southbridge */
-
+
p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, NULL);
if (p!=NULL) {
/* 0x40 - 0x4f == 686B, 0x10 - 0x2f == 686A; thanks Dan Hollis */
@@ -194,9 +194,9 @@
if (p->revision < 0x10 || p->revision > 0x12)
goto exit;
}
-
+
/*
- * Ok we have the problem. Now set the PCI master grant to
+ * Ok we have the problem. Now set the PCI master grant to
* occur every master grant. The apparent bug is that under high
* PCI load (quite common in Linux of course) you can get data
* loss when the CPU is held off the bus for 3 bus master requests
@@ -209,7 +209,7 @@
*/
pci_read_config_byte(dev, 0x76, &busarb);
- /* Set bit 4 and bi 5 of byte 76 to 0x01
+ /* Set bit 4 and bi 5 of byte 76 to 0x01
"Master priority rotation on every PCI master grant */
busarb &= ~(1<<5);
busarb |= (1<<4);
@@ -252,7 +252,7 @@
* that DMA to AGP space. Latency must be set to 0xA and triton
* workaround applied too
* [Info kindly provided by ALi]
- */
+ */
static void quirk_alimagik(struct pci_dev *dev)
{
if ((pci_pci_problems&PCIPCI_ALIMAGIK)==0) {
@@ -260,8 +260,8 @@
pci_pci_problems |= PCIPCI_ALIMAGIK|PCIPCI_TRITON;
}
}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1647, quirk_alimagik);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1651, quirk_alimagik);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1647, quirk_alimagik);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1651, quirk_alimagik);
/*
* Natoma has some interesting boundary conditions with Zoran stuff
@@ -274,12 +274,12 @@
pci_pci_problems |= PCIPCI_NATOMA;
}
}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_natoma);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_0, quirk_natoma);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_1, quirk_natoma);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0, quirk_natoma);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_1, quirk_natoma);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2, quirk_natoma);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_natoma);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_0, quirk_natoma);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_1, quirk_natoma);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0, quirk_natoma);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_1, quirk_natoma);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2, quirk_natoma);
/*
* This chip can cause PCI parity errors if config register 0xA0 is read
@@ -400,7 +400,7 @@
/*
* For now we only print it out. Eventually we'll want to
* reserve it (at least if it's in the 0x1000+ range), but
- * let's get enough confirmation reports first.
+ * let's get enough confirmation reports first.
*/
base &= -size;
dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, base + size - 1);
@@ -425,7 +425,7 @@
}
/*
* For now we only print it out. Eventually we'll want to
- * reserve it, but let's get enough confirmation reports first.
+ * reserve it, but let's get enough confirmation reports first.
*/
base &= -size;
dev_info(&dev->dev, "%s MMIO at %04x-%04x\n", name, base, base + size - 1);
@@ -682,7 +682,7 @@
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A,
quirk_xio2000a);
-#ifdef CONFIG_X86_IO_APIC
+#ifdef CONFIG_X86_IO_APIC
#include <asm/io_apic.h>
@@ -696,12 +696,12 @@
static void quirk_via_ioapic(struct pci_dev *dev)
{
u8 tmp;
-
+
if (nr_ioapics < 1)
tmp = 0; /* nothing routed to external APIC */
else
tmp = 0x1f; /* all known bits (4-0) routed to external APIC */
-
+
dev_info(&dev->dev, "%sbling VIA external APIC routing\n",
tmp == 0 ? "Disa" : "Ena");
@@ -712,7 +712,7 @@
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic);
/*
- * VIA 8237: Some BIOSs don't set the 'Bypass APIC De-Assert Message' Bit.
+ * VIA 8237: Some BIOSes don't set the 'Bypass APIC De-Assert Message' Bit.
* This leads to doubled level interrupt rates.
* Set this bit to get rid of cycle wastage.
* Otherwise uncritical.
@@ -986,7 +986,7 @@
static void quirk_disable_pxb(struct pci_dev *pdev)
{
u16 config;
-
+
if (pdev->revision != 0x04) /* Only C0 requires this */
return;
pci_read_config_word(pdev, 0x40, &config);
@@ -1094,11 +1094,11 @@
* On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge
* is not activated. The myth is that Asus said that they do not want the
* users to be irritated by just another PCI Device in the Win98 device
- * manager. (see the file prog/hotplug/README.p4b in the lm_sensors
+ * manager. (see the file prog/hotplug/README.p4b in the lm_sensors
* package 2.7.0 for details)
*
- * The SMBus PCI Device can be activated by setting a bit in the ICH LPC
- * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it
+ * The SMBus PCI Device can be activated by setting a bit in the ICH LPC
+ * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it
* becomes necessary to do this tweak in two steps -- the chosen trigger
* is either the Host bridge (preferred) or on-board VGA controller.
*
@@ -1253,7 +1253,7 @@
static void asus_hides_smbus_lpc(struct pci_dev *dev)
{
u16 val;
-
+
if (likely(!asus_hides_smbus))
return;
@@ -1640,8 +1640,8 @@
dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n",
dev->vendor, dev->device);
}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt);
/*
* disable boot interrupts on HT-1000
@@ -1673,8 +1673,8 @@
dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n",
dev->vendor, dev->device);
}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt);
/*
* disable boot interrupts on AMD and ATI chipsets
@@ -1730,8 +1730,8 @@
dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n",
dev->vendor, dev->device);
}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt);
#endif /* CONFIG_X86_IO_APIC */
/*
@@ -2127,8 +2127,8 @@
#ifdef CONFIG_PCI_MSI
/* Some chipsets do not support MSI. We cannot easily rely on setting
* PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually
- * some other busses controlled by the chipset even if Linux is not
- * aware of it. Instead of setting the flag on all busses in the
+ * some other buses controlled by the chipset even if Linux is not
+ * aware of it. Instead of setting the flag on all buses in the
* machine, simply disable MSI globally.
*/
static void quirk_disable_all_msi(struct pci_dev *dev)
@@ -2288,14 +2288,14 @@
nvenet_msi_disable);
/*
- * Some versions of the MCP55 bridge from nvidia have a legacy irq routing
- * config register. This register controls the routing of legacy interrupts
- * from devices that route through the MCP55. If this register is misprogramed
- * interrupts are only sent to the bsp, unlike conventional systems where the
- * irq is broadxast to all online cpus. Not having this register set
- * properly prevents kdump from booting up properly, so lets make sure that
- * we have it set correctly.
- * Note this is an undocumented register.
+ * Some versions of the MCP55 bridge from Nvidia have a legacy IRQ routing
+ * config register. This register controls the routing of legacy
+ * interrupts from devices that route through the MCP55. If this register
+ * is misprogrammed, interrupts are only sent to the BSP, unlike
+ * conventional systems where the IRQ is broadcast to all online CPUs. Not
+ * having this register set properly prevents kdump from booting up
+ * properly, so let's make sure that we have it set correctly.
+ * Note that this is an undocumented register.
*/
static void nvbridge_check_legacy_irq_routing(struct pci_dev *dev)
{
@@ -2626,7 +2626,7 @@
/* Allow manual resource allocation for PCI hotplug bridges
* via pci=hpmemsize=nnM and pci=hpiosize=nnM parameters. For
* some PCI-PCI hotplug bridges, like PLX 6254 (former HINT HB6),
- * kernel fails to allocate resources when hotplug device is
+ * kernel fails to allocate resources when hotplug device is
* inserted and PCI bus is rescanned.
*/
static void quirk_hotplug_bridge(struct pci_dev *dev)
diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index 8fc54b7..1576851 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -7,7 +7,7 @@
{
int i;
- msi_remove_pci_irq_vectors(dev);
+ msi_remove_pci_irq_vectors(dev);
pci_cleanup_rom(dev);
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
diff --git a/drivers/pci/search.c b/drivers/pci/search.c
index d0627fa..3ff2ac7 100644
--- a/drivers/pci/search.c
+++ b/drivers/pci/search.c
@@ -1,5 +1,5 @@
/*
- * PCI searching functions.
+ * PCI searching functions.
*
* Copyright (C) 1993 -- 1997 Drew Eckhardt, Frederic Potter,
* David Mosberger-Tang
@@ -96,12 +96,12 @@
* pci_find_next_bus - begin or continue searching for a PCI bus
* @from: Previous PCI bus found, or %NULL for new search.
*
- * Iterates through the list of known PCI busses. A new search is
+ * Iterates through the list of known PCI buses. A new search is
* initiated by passing %NULL as the @from argument. Otherwise if
* @from is not %NULL, searches continue from next device on the
* global list.
*/
-struct pci_bus *
+struct pci_bus *
pci_find_next_bus(const struct pci_bus *from)
{
struct list_head *n;
@@ -119,11 +119,11 @@
/**
* pci_get_slot - locate PCI device for a given PCI slot
* @bus: PCI bus on which desired PCI device resides
- * @devfn: encodes number of PCI slot in which the desired PCI
- * device resides and the logical device number within that slot
+ * @devfn: encodes number of PCI slot in which the desired PCI
+ * device resides and the logical device number within that slot
* in case of multi-function devices.
*
- * Given a PCI bus and slot/function number, the desired PCI device
+ * Given a PCI bus and slot/function number, the desired PCI device
* is located in the list of PCI devices.
* If the device is found, its reference count is increased and this
* function returns a pointer to its data structure. The caller must
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 4ce83b2..219a410 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -292,8 +292,8 @@
(!(res->flags & IORESOURCE_ROM_ENABLE))))
add_to_list(fail_head,
dev_res->dev, res,
- 0 /* dont care */,
- 0 /* dont care */);
+ 0 /* don't care */,
+ 0 /* don't care */);
}
reset_resource(res);
}
@@ -667,9 +667,9 @@
if (!io) {
pci_write_config_word(bridge, PCI_IO_BASE, 0xf0f0);
pci_read_config_word(bridge, PCI_IO_BASE, &io);
- pci_write_config_word(bridge, PCI_IO_BASE, 0x0);
- }
- if (io)
+ pci_write_config_word(bridge, PCI_IO_BASE, 0x0);
+ }
+ if (io)
b_res[0].flags |= IORESOURCE_IO;
/* DECchip 21050 pass 2 errata: the bridge may miss an address
disconnect boundary by one PCI data phase.
@@ -819,7 +819,7 @@
resource_size_t min_align, align;
if (!b_res)
- return;
+ return;
min_align = window_alignment(bus, IORESOURCE_IO);
list_for_each_entry(dev, &bus->devices, bus_list) {
@@ -950,7 +950,7 @@
if (realloc_head && i >= PCI_IOV_RESOURCES &&
i <= PCI_IOV_RESOURCE_END) {
r->end = r->start - 1;
- add_to_list(realloc_head, dev, r, r_size, 0/* dont' care */);
+ add_to_list(realloc_head, dev, r, r_size, 0/* don't care */);
children_add_size += r_size;
continue;
}
@@ -1456,8 +1456,8 @@
/*
* first try will not touch pci bridge res
- * second and later try will clear small leaf bridge res
- * will stop till to the max deepth if can not find good one
+ * second and later try will clear small leaf bridge res
+ * will stop till to the max depth if can not find good one
*/
void pci_assign_unassigned_root_bus_resources(struct pci_bus *bus)
{
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 07f2edd..83c4d3b 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -159,7 +159,7 @@
return 0;
}
-static int pci_revert_fw_address(struct resource *res, struct pci_dev *dev,
+static int pci_revert_fw_address(struct resource *res, struct pci_dev *dev,
int resno, resource_size_t size)
{
struct resource *root, *conflict;
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index c1e9284..448ca56 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -53,7 +53,7 @@
static const char *pci_bus_speed_strings[] = {
"33 MHz PCI", /* 0x00 */
"66 MHz PCI", /* 0x01 */
- "66 MHz PCI-X", /* 0x02 */
+ "66 MHz PCI-X", /* 0x02 */
"100 MHz PCI-X", /* 0x03 */
"133 MHz PCI-X", /* 0x04 */
NULL, /* 0x05 */
diff --git a/drivers/pci/syscall.c b/drivers/pci/syscall.c
index e1c1ec5..24750a1 100644
--- a/drivers/pci/syscall.c
+++ b/drivers/pci/syscall.c
@@ -44,7 +44,7 @@
default:
err = -EINVAL;
goto error;
- };
+ }
err = -EIO;
if (cfg_ret != PCIBIOS_SUCCESSFUL)
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 87cce50..009b024 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -26,11 +26,11 @@
struct {
__u8 is_msix : 1;
__u8 multiple: 3; /* log2 number of messages */
- __u8 maskbit : 1; /* mask-pending bit supported ? */
- __u8 is_64 : 1; /* Address size: 0=32bit 1=64bit */
- __u8 pos; /* Location of the msi capability */
- __u16 entry_nr; /* specific enabled entry */
- unsigned default_irq; /* default pre-assigned irq */
+ __u8 maskbit : 1; /* mask-pending bit supported ? */
+ __u8 is_64 : 1; /* Address size: 0=32bit 1=64bit */
+ __u8 pos; /* Location of the msi capability */
+ __u16 entry_nr; /* specific enabled entry */
+ unsigned default_irq; /* default pre-assigned irq */
} msi_attrib;
u32 masked; /* mask bits */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 835ec7b..1084a15 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -32,7 +32,6 @@
#include <linux/irqreturn.h>
#include <uapi/linux/pci.h>
-/* Include the ID list */
#include <linux/pci_ids.h>
/*
@@ -42,9 +41,10 @@
*
* 7:3 = slot
* 2:0 = function
- * PCI_DEVFN(), PCI_SLOT(), and PCI_FUNC() are defined uapi/linux/pci.h
+ *
+ * PCI_DEVFN(), PCI_SLOT(), and PCI_FUNC() are defined in uapi/linux/pci.h.
* In the interest of not exposing interfaces to user-space unnecessarily,
- * the following kernel only defines are being added here.
+ * the following kernel-only defines are being added here.
*/
#define PCI_DEVID(bus, devfn) ((((u16)bus) << 8) | devfn)
/* return bus from PCI devid = ((u16)bus_number) << 8) | devfn */
@@ -153,10 +153,10 @@
/* Reset is NOT asserted (Use to deassert reset) */
pcie_deassert_reset = (__force pcie_reset_state_t) 1,
- /* Use #PERST to reset PCI-E device */
+ /* Use #PERST to reset PCIe device */
pcie_warm_reset = (__force pcie_reset_state_t) 2,
- /* Use PCI-E Hot Reset to reset device */
+ /* Use PCIe Hot Reset to reset device */
pcie_hot_reset = (__force pcie_reset_state_t) 3
};
@@ -259,13 +259,13 @@
unsigned int class; /* 3 bytes: (base,sub,prog-if) */
u8 revision; /* PCI revision, low byte of class word */
u8 hdr_type; /* PCI header type (`multi' flag masked out) */
- u8 pcie_cap; /* PCI-E capability offset */
+ u8 pcie_cap; /* PCIe capability offset */
u8 msi_cap; /* MSI capability offset */
u8 msix_cap; /* MSI-X capability offset */
- u8 pcie_mpss:3; /* PCI-E Max Payload Size Supported */
+ u8 pcie_mpss:3; /* PCIe Max Payload Size Supported */
u8 rom_base_reg; /* which config register controls the ROM */
- u8 pin; /* which interrupt pin this device uses */
- u16 pcie_flags_reg; /* cached PCI-E Capabilities Register */
+ u8 pin; /* which interrupt pin this device uses */
+ u16 pcie_flags_reg; /* cached PCIe Capabilities Register */
struct pci_driver *driver; /* which driver has allocated this device */
u64 dma_mask; /* Mask of the bits of bus address this
@@ -300,7 +300,7 @@
unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */
#ifdef CONFIG_PCIEASPM
- struct pcie_link_state *link_state; /* ASPM link state. */
+ struct pcie_link_state *link_state; /* ASPM link state */
#endif
pci_channel_state_t error_state; /* current connectivity state */
@@ -317,7 +317,7 @@
bool match_driver; /* Skip attaching driver */
/* These fields are used by common fixups */
- unsigned int transparent:1; /* Transparent PCI bridge */
+ unsigned int transparent:1; /* Subtractive decode PCI bridge */
unsigned int multifunction:1;/* Part of multi-function device */
/* keep track of device state */
unsigned int is_added:1;
@@ -326,7 +326,7 @@
unsigned int block_cfg_access:1; /* config space access is blocked */
unsigned int broken_parity_status:1; /* Device generates false positive parity */
unsigned int irq_reroute_variant:2; /* device needs IRQ rerouting variant */
- unsigned int msi_enabled:1;
+ unsigned int msi_enabled:1;
unsigned int msix_enabled:1;
unsigned int ari_enabled:1; /* ARI forwarding */
unsigned int is_managed:1;
@@ -371,7 +371,6 @@
if (dev->is_virtfn)
dev = dev->physfn;
#endif
-
return dev;
}
@@ -456,7 +455,7 @@
char name[48];
unsigned short bridge_ctl; /* manage NO_ISA/FBB/et al behaviors */
- pci_bus_flags_t bus_flags; /* Inherited by child busses */
+ pci_bus_flags_t bus_flags; /* inherited by child buses */
struct device *bridge;
struct device dev;
struct bin_attribute *legacy_io; /* legacy I/O for this bus */
@@ -468,7 +467,7 @@
#define to_pci_bus(n) container_of(n, struct pci_bus, dev)
/*
- * Returns true if the pci bus is root (behind host-pci bridge),
+ * Returns true if the PCI bus is root (behind host-PCI bridge),
* false otherwise
*
* Some code assumes that "bus->self == NULL" means that bus is a root bus.
@@ -510,7 +509,7 @@
#define PCIBIOS_BUFFER_TOO_SMALL 0x89
/*
- * Translate above to generic errno for passing back through non-pci.
+ * Translate above to generic errno for passing back through non-PCI code.
*/
static inline int pcibios_err_to_errno(int err)
{
@@ -561,11 +560,12 @@
struct list_head list; /* for IDs added at runtime */
};
-/* ---------------------------------------------------------------- */
-/** PCI Error Recovery System (PCI-ERS). If a PCI device driver provides
- * a set of callbacks in struct pci_error_handlers, then that device driver
- * will be notified of PCI bus errors, and will be driven to recovery
- * when an error occurs.
+
+/*
+ * PCI Error Recovery System (PCI-ERS). If a PCI device driver provides
+ * a set of callbacks in struct pci_error_handlers, that device driver
+ * will be notified of PCI bus errors, and will be driven to recovery
+ * when an error occurs.
*/
typedef unsigned int __bitwise pci_ers_result_t;
@@ -609,7 +609,6 @@
void (*resume)(struct pci_dev *dev);
};
-/* ---------------------------------------------------------------- */
struct module;
struct pci_driver {
@@ -713,10 +712,10 @@
extern struct bus_type pci_bus_type;
-/* Do NOT directly access these two variables, unless you are arch specific pci
- * code, or pci core code. */
+/* Do NOT directly access these two variables, unless you are arch-specific PCI
+ * code, or PCI core code. */
extern struct list_head pci_root_buses; /* list of all known PCI buses */
-/* Some device drivers need know if pci is initiated */
+/* Some device drivers need know if PCI is initiated */
int no_pci_devices(void);
void pcibios_resource_survey_bus(struct pci_bus *bus);
@@ -724,7 +723,7 @@
void pcibios_remove_bus(struct pci_bus *bus);
void pcibios_fixup_bus(struct pci_bus *);
int __must_check pcibios_enable_device(struct pci_dev *, int mask);
-/* Architecture specific versions may override this (weak) */
+/* Architecture-specific versions may override this (weak) */
char *pcibios_setup(char *str);
/* Used only when drivers/pci/setup.c is used */
@@ -1258,7 +1257,7 @@
/*
* PCI domain support. Sometimes called PCI segment (eg by ACPI),
- * a PCI domain is defined to be a set of PCI busses which share
+ * a PCI domain is defined to be a set of PCI buses which share
* configuration space.
*/
#ifdef CONFIG_PCI_DOMAINS
@@ -1672,7 +1671,7 @@
extern unsigned long pci_hotplug_io_size;
extern unsigned long pci_hotplug_mem_size;
-/* Architecture specific versions may override these (weak) */
+/* Architecture-specific versions may override these (weak) */
int pcibios_add_platform_entries(struct pci_dev *dev);
void pcibios_disable_device(struct pci_dev *dev);
void pcibios_set_master(struct pci_dev *dev);
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index 430dd96..a2e2f1d 100644
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -39,8 +39,8 @@
* @hardware_test: Called to run a specified hardware test on the specified
* slot.
* @get_power_status: Called to get the current power status of a slot.
- * If this field is NULL, the value passed in the struct hotplug_slot_info
- * will be used when this value is requested by a user.
+ * If this field is NULL, the value passed in the struct hotplug_slot_info
+ * will be used when this value is requested by a user.
* @get_attention_status: Called to get the current attention status of a slot.
* If this field is NULL, the value passed in the struct hotplug_slot_info
* will be used when this value is requested by a user.
@@ -191,4 +191,3 @@
void pci_configure_slot(struct pci_dev *dev);
#endif
-
diff --git a/include/linux/pcieport_if.h b/include/linux/pcieport_if.h
index 9572669..4f1089f 100644
--- a/include/linux/pcieport_if.h
+++ b/include/linux/pcieport_if.h
@@ -23,7 +23,7 @@
#define PCIE_PORT_SERVICE_VC (1 << PCIE_PORT_SERVICE_VC_SHIFT)
struct pcie_device {
- int irq; /* Service IRQ/MSI/MSI-X Vector */
+ int irq; /* Service IRQ/MSI/MSI-X Vector */
struct pci_dev *port; /* Root/Upstream/Downstream Port */
u32 service; /* Port service this device represents */
void *priv_data; /* Service Private Data */
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index 0890556..4a98e85 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -13,10 +13,10 @@
* PCI to PCI Bridge Specification
* PCI System Design Guide
*
- * For hypertransport information, please consult the following manuals
- * from http://www.hypertransport.org
+ * For HyperTransport information, please consult the following manuals
+ * from http://www.hypertransport.org
*
- * The Hypertransport I/O Link Specification
+ * The HyperTransport I/O Link Specification
*/
#ifndef LINUX_PCI_REGS_H
@@ -37,7 +37,7 @@
#define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */
#define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */
#define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */
-#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */
+#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */
#define PCI_COMMAND_SERR 0x100 /* Enable SERR */
#define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */
#define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
@@ -45,7 +45,7 @@
#define PCI_STATUS 0x06 /* 16 bits */
#define PCI_STATUS_INTERRUPT 0x08 /* Interrupt status */
#define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */
-#define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */
+#define PCI_STATUS_66MHZ 0x20 /* Support 66 MHz PCI 2.1 bus */
#define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */
#define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */
#define PCI_STATUS_PARITY 0x100 /* Detected parity error */
@@ -205,14 +205,14 @@
#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */
#define PCI_CAP_ID_PCIX 0x07 /* PCI-X */
#define PCI_CAP_ID_HT 0x08 /* HyperTransport */
-#define PCI_CAP_ID_VNDR 0x09 /* Vendor specific */
+#define PCI_CAP_ID_VNDR 0x09 /* Vendor-Specific */
#define PCI_CAP_ID_DBG 0x0A /* Debug port */
#define PCI_CAP_ID_CCRC 0x0B /* CompactPCI Central Resource Control */
-#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */
+#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */
#define PCI_CAP_ID_SSVID 0x0D /* Bridge subsystem vendor/device ID */
#define PCI_CAP_ID_AGP3 0x0E /* AGP Target PCI-PCI bridge */
#define PCI_CAP_ID_SECDEV 0x0F /* Secure Device */
-#define PCI_CAP_ID_EXP 0x10 /* PCI Express */
+#define PCI_CAP_ID_EXP 0x10 /* PCI Express */
#define PCI_CAP_ID_MSIX 0x11 /* MSI-X */
#define PCI_CAP_ID_SATA 0x12 /* SATA Data/Index Conf. */
#define PCI_CAP_ID_AF 0x13 /* PCI Advanced Features */
@@ -268,8 +268,8 @@
#define PCI_AGP_COMMAND_RQ_MASK 0xff000000 /* Master: Maximum number of requests */
#define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband addressing enabled */
#define PCI_AGP_COMMAND_AGP 0x0100 /* Allow processing of AGP transactions */
-#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */
-#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */
+#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */
+#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */
#define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */
#define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 2x rate */
#define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 1x rate */
@@ -321,7 +321,7 @@
#define PCI_MSIX_PBA_OFFSET 0xfffffff8 /* Offset into specified BAR */
#define PCI_CAP_MSIX_SIZEOF 12 /* size of MSIX registers */
-/* MSI-X entry's format */
+/* MSI-X Table entry format */
#define PCI_MSIX_ENTRY_SIZE 16
#define PCI_MSIX_ENTRY_LOWER_ADDR 0
#define PCI_MSIX_ENTRY_UPPER_ADDR 4
@@ -372,7 +372,7 @@
#define PCI_X_CMD_SPLIT_16 0x0060 /* Max 16 */
#define PCI_X_CMD_SPLIT_32 0x0070 /* Max 32 */
#define PCI_X_CMD_MAX_SPLIT 0x0070 /* Max Outstanding Split Transactions */
-#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */
+#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */
#define PCI_X_STATUS 4 /* PCI-X capabilities */
#define PCI_X_STATUS_DEVFN 0x000000ff /* A copy of devfn */
#define PCI_X_STATUS_BUS 0x0000ff00 /* A copy of bus nr */
@@ -407,8 +407,8 @@
/* PCI Bridge Subsystem ID registers */
-#define PCI_SSVID_VENDOR_ID 4 /* PCI-Bridge subsystem vendor id register */
-#define PCI_SSVID_DEVICE_ID 6 /* PCI-Bridge subsystem device id register */
+#define PCI_SSVID_VENDOR_ID 4 /* PCI Bridge subsystem vendor ID */
+#define PCI_SSVID_DEVICE_ID 6 /* PCI Bridge subsystem device ID */
/* PCI Express capability registers */
@@ -484,12 +484,12 @@
#define PCI_EXP_LNKCTL_CLKREQ_EN 0x0100 /* Enable clkreq */
#define PCI_EXP_LNKCTL_HAWD 0x0200 /* Hardware Autonomous Width Disable */
#define PCI_EXP_LNKCTL_LBMIE 0x0400 /* Link Bandwidth Management Interrupt Enable */
-#define PCI_EXP_LNKCTL_LABIE 0x0800 /* Lnk Autonomous Bandwidth Interrupt Enable */
+#define PCI_EXP_LNKCTL_LABIE 0x0800 /* Link Autonomous Bandwidth Interrupt Enable */
#define PCI_EXP_LNKSTA 18 /* Link Status */
#define PCI_EXP_LNKSTA_CLS 0x000f /* Current Link Speed */
#define PCI_EXP_LNKSTA_CLS_2_5GB 0x0001 /* Current Link Speed 2.5GT/s */
#define PCI_EXP_LNKSTA_CLS_5_0GB 0x0002 /* Current Link Speed 5.0GT/s */
-#define PCI_EXP_LNKSTA_NLW 0x03f0 /* Nogotiated Link Width */
+#define PCI_EXP_LNKSTA_NLW 0x03f0 /* Negotiated Link Width */
#define PCI_EXP_LNKSTA_NLW_SHIFT 4 /* start of NLW mask in link status */
#define PCI_EXP_LNKSTA_LT 0x0800 /* Link Training */
#define PCI_EXP_LNKSTA_SLC 0x1000 /* Slot Clock Configuration */
@@ -593,7 +593,7 @@
#define PCI_EXT_CAP_ID_MFVC 0x08 /* Multi-Function VC Capability */
#define PCI_EXT_CAP_ID_VC9 0x09 /* same as _VC */
#define PCI_EXT_CAP_ID_RCRB 0x0A /* Root Complex RB? */
-#define PCI_EXT_CAP_ID_VNDR 0x0B /* Vendor Specific */
+#define PCI_EXT_CAP_ID_VNDR 0x0B /* Vendor-Specific */
#define PCI_EXT_CAP_ID_CAC 0x0C /* Config Access - obsolete */
#define PCI_EXT_CAP_ID_ACS 0x0D /* Access Control Services */
#define PCI_EXT_CAP_ID_ARI 0x0E /* Alternate Routing ID */
@@ -602,12 +602,12 @@
#define PCI_EXT_CAP_ID_MRIOV 0x11 /* Multi Root I/O Virtualization */
#define PCI_EXT_CAP_ID_MCAST 0x12 /* Multicast */
#define PCI_EXT_CAP_ID_PRI 0x13 /* Page Request Interface */
-#define PCI_EXT_CAP_ID_AMD_XXX 0x14 /* reserved for AMD */
-#define PCI_EXT_CAP_ID_REBAR 0x15 /* resizable BAR */
-#define PCI_EXT_CAP_ID_DPA 0x16 /* dynamic power alloc */
-#define PCI_EXT_CAP_ID_TPH 0x17 /* TPH request */
-#define PCI_EXT_CAP_ID_LTR 0x18 /* latency tolerance reporting */
-#define PCI_EXT_CAP_ID_SECPCI 0x19 /* Secondary PCIe */
+#define PCI_EXT_CAP_ID_AMD_XXX 0x14 /* Reserved for AMD */
+#define PCI_EXT_CAP_ID_REBAR 0x15 /* Resizable BAR */
+#define PCI_EXT_CAP_ID_DPA 0x16 /* Dynamic Power Allocation */
+#define PCI_EXT_CAP_ID_TPH 0x17 /* TPH Requester */
+#define PCI_EXT_CAP_ID_LTR 0x18 /* Latency Tolerance Reporting */
+#define PCI_EXT_CAP_ID_SECPCI 0x19 /* Secondary PCIe Capability */
#define PCI_EXT_CAP_ID_PMUX 0x1A /* Protocol Multiplexing */
#define PCI_EXT_CAP_ID_PASID 0x1B /* Process Address Space ID */
#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PASID
@@ -667,9 +667,9 @@
#define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */
/* Multi ERR_COR Received */
#define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002
-/* ERR_FATAL/NONFATAL Recevied */
+/* ERR_FATAL/NONFATAL Received */
#define PCI_ERR_ROOT_UNCOR_RCV 0x00000004
-/* Multi ERR_FATAL/NONFATAL Recevied */
+/* Multi ERR_FATAL/NONFATAL Received */
#define PCI_ERR_ROOT_MULTI_UNCOR_RCV 0x00000008
#define PCI_ERR_ROOT_FIRST_FATAL 0x00000010 /* First Fatal */
#define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */
@@ -678,7 +678,7 @@
/* Virtual Channel */
#define PCI_VC_PORT_REG1 4
-#define PCI_VC_REG1_EVCC 0x7 /* extended vc count */
+#define PCI_VC_REG1_EVCC 0x7 /* extended VC count */
#define PCI_VC_PORT_REG2 8
#define PCI_VC_REG2_32_PHASE 0x2
#define PCI_VC_REG2_64_PHASE 0x4
@@ -711,7 +711,7 @@
#define PCI_VNDR_HEADER_LEN(x) (((x) >> 20) & 0xfff)
/*
- * Hypertransport sub capability types
+ * HyperTransport sub capability types
*
* Unfortunately there are both 3 bit and 5 bit capability types defined
* in the HT spec, catering for that is a little messy. You probably don't
@@ -739,8 +739,8 @@
#define HT_CAPTYPE_DIRECT_ROUTE 0xB0 /* Direct routing configuration */
#define HT_CAPTYPE_VCSET 0xB8 /* Virtual Channel configuration */
#define HT_CAPTYPE_ERROR_RETRY 0xC0 /* Retry on error configuration */
-#define HT_CAPTYPE_GEN3 0xD0 /* Generation 3 hypertransport configuration */
-#define HT_CAPTYPE_PM 0xE0 /* Hypertransport powermanagement configuration */
+#define HT_CAPTYPE_GEN3 0xD0 /* Generation 3 HyperTransport configuration */
+#define HT_CAPTYPE_PM 0xE0 /* HyperTransport power management configuration */
#define HT_CAP_SIZEOF_LONG 28 /* slave & primary */
#define HT_CAP_SIZEOF_SHORT 24 /* host & secondary */
@@ -777,14 +777,14 @@
#define PCI_PRI_ALLOC_REQ 0x0c /* PRI max reqs allowed */
#define PCI_EXT_CAP_PRI_SIZEOF 16
-/* PASID capability */
+/* Process Address Space ID */
#define PCI_PASID_CAP 0x04 /* PASID feature register */
#define PCI_PASID_CAP_EXEC 0x02 /* Exec permissions Supported */
-#define PCI_PASID_CAP_PRIV 0x04 /* Priviledge Mode Supported */
+#define PCI_PASID_CAP_PRIV 0x04 /* Privilege Mode Supported */
#define PCI_PASID_CTRL 0x06 /* PASID control register */
#define PCI_PASID_CTRL_ENABLE 0x01 /* Enable bit */
#define PCI_PASID_CTRL_EXEC 0x02 /* Exec permissions Enable */
-#define PCI_PASID_CTRL_PRIV 0x04 /* Priviledge Mode Enable */
+#define PCI_PASID_CTRL_PRIV 0x04 /* Privilege Mode Enable */
#define PCI_EXT_CAP_PASID_SIZEOF 8
/* Single Root I/O Virtualization */
@@ -839,22 +839,22 @@
#define PCI_ACS_CTRL 0x06 /* ACS Control Register */
#define PCI_ACS_EGRESS_CTL_V 0x08 /* ACS Egress Control Vector */
-#define PCI_VSEC_HDR 4 /* extended cap - vendor specific */
+#define PCI_VSEC_HDR 4 /* extended cap - vendor-specific */
#define PCI_VSEC_HDR_LEN_SHIFT 20 /* shift for length field */
-/* sata capability */
+/* SATA capability */
#define PCI_SATA_REGS 4 /* SATA REGs specifier */
#define PCI_SATA_REGS_MASK 0xF /* location - BAR#/inline */
#define PCI_SATA_REGS_INLINE 0xF /* REGS in config space */
#define PCI_SATA_SIZEOF_SHORT 8
#define PCI_SATA_SIZEOF_LONG 16
-/* resizable BARs */
+/* Resizable BARs */
#define PCI_REBAR_CTRL 8 /* control register */
#define PCI_REBAR_CTRL_NBAR_MASK (7 << 5) /* mask for # bars */
#define PCI_REBAR_CTRL_NBAR_SHIFT 5 /* shift for # bars */
-/* dynamic power allocation */
+/* Dynamic Power Allocation */
#define PCI_DPA_CAP 4 /* capability register */
#define PCI_DPA_CAP_SUBSTATE_MASK 0x1F /* # substates - 1 */
#define PCI_DPA_BASE_SIZEOF 16 /* size with 0 substates */
