blob: dc6aafeb9f7b44eb976cb89edbaf965fb648723a [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2018-2019 NXP.
*
* Limitations:
* - The TPM counter and period counter are shared between
* multiple channels, so all channels should use same period
* settings.
* - Changes to polarity cannot be latched at the time of the
* next period start.
* - Changing period and duty cycle together isn't atomic,
* with the wrong timing it might happen that a period is
* produced with old duty cycle but new period settings.
*/
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/slab.h>
#define PWM_IMX_TPM_PARAM 0x4
#define PWM_IMX_TPM_GLOBAL 0x8
#define PWM_IMX_TPM_SC 0x10
#define PWM_IMX_TPM_CNT 0x14
#define PWM_IMX_TPM_MOD 0x18
#define PWM_IMX_TPM_CnSC(n) (0x20 + (n) * 0x8)
#define PWM_IMX_TPM_CnV(n) (0x24 + (n) * 0x8)
#define PWM_IMX_TPM_PARAM_CHAN GENMASK(7, 0)
#define PWM_IMX_TPM_SC_PS GENMASK(2, 0)
#define PWM_IMX_TPM_SC_CMOD GENMASK(4, 3)
#define PWM_IMX_TPM_SC_CMOD_INC_EVERY_CLK FIELD_PREP(PWM_IMX_TPM_SC_CMOD, 1)
#define PWM_IMX_TPM_SC_CPWMS BIT(5)
#define PWM_IMX_TPM_CnSC_CHF BIT(7)
#define PWM_IMX_TPM_CnSC_MSB BIT(5)
#define PWM_IMX_TPM_CnSC_MSA BIT(4)
/*
* The reference manual describes this field as two separate bits. The
* semantic of the two bits isn't orthogonal though, so they are treated
* together as a 2-bit field here.
*/
#define PWM_IMX_TPM_CnSC_ELS GENMASK(3, 2)
#define PWM_IMX_TPM_CnSC_ELS_INVERSED FIELD_PREP(PWM_IMX_TPM_CnSC_ELS, 1)
#define PWM_IMX_TPM_CnSC_ELS_NORMAL FIELD_PREP(PWM_IMX_TPM_CnSC_ELS, 2)
#define PWM_IMX_TPM_MOD_WIDTH 16
#define PWM_IMX_TPM_MOD_MOD GENMASK(PWM_IMX_TPM_MOD_WIDTH - 1, 0)
struct imx_tpm_pwm_chip {
struct pwm_chip chip;
struct clk *clk;
void __iomem *base;
struct mutex lock;
u32 user_count;
u32 enable_count;
u32 real_period;
};
struct imx_tpm_pwm_param {
u8 prescale;
u32 mod;
u32 val;
};
static inline struct imx_tpm_pwm_chip *
to_imx_tpm_pwm_chip(struct pwm_chip *chip)
{
return container_of(chip, struct imx_tpm_pwm_chip, chip);
}
/*
* This function determines for a given pwm_state *state that a consumer
* might request the pwm_state *real_state that eventually is implemented
* by the hardware and the necessary register values (in *p) to achieve
* this.
*/
static int pwm_imx_tpm_round_state(struct pwm_chip *chip,
struct imx_tpm_pwm_param *p,
struct pwm_state *real_state,
const struct pwm_state *state)
{
struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
u32 rate, prescale, period_count, clock_unit;
u64 tmp;
rate = clk_get_rate(tpm->clk);
tmp = (u64)state->period * rate;
clock_unit = DIV_ROUND_CLOSEST_ULL(tmp, NSEC_PER_SEC);
if (clock_unit <= PWM_IMX_TPM_MOD_MOD)
prescale = 0;
else
prescale = ilog2(clock_unit) + 1 - PWM_IMX_TPM_MOD_WIDTH;
if ((!FIELD_FIT(PWM_IMX_TPM_SC_PS, prescale)))
return -ERANGE;
p->prescale = prescale;
period_count = (clock_unit + ((1 << prescale) >> 1)) >> prescale;
p->mod = period_count;
/* calculate real period HW can support */
tmp = (u64)period_count << prescale;
tmp *= NSEC_PER_SEC;
real_state->period = DIV_ROUND_CLOSEST_ULL(tmp, rate);
/*
* if eventually the PWM output is inactive, either
* duty cycle is 0 or status is disabled, need to
* make sure the output pin is inactive.
*/
if (!state->enabled)
real_state->duty_cycle = 0;
else
real_state->duty_cycle = state->duty_cycle;
tmp = (u64)p->mod * real_state->duty_cycle;
p->val = DIV64_U64_ROUND_CLOSEST(tmp, real_state->period);
real_state->polarity = state->polarity;
real_state->enabled = state->enabled;
return 0;
}
static int pwm_imx_tpm_get_state(struct pwm_chip *chip,
struct pwm_device *pwm,
struct pwm_state *state)
{
struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
u32 rate, val, prescale;
u64 tmp;
/* get period */
state->period = tpm->real_period;
/* get duty cycle */
rate = clk_get_rate(tpm->clk);
val = readl(tpm->base + PWM_IMX_TPM_SC);
prescale = FIELD_GET(PWM_IMX_TPM_SC_PS, val);
tmp = readl(tpm->base + PWM_IMX_TPM_CnV(pwm->hwpwm));
tmp = (tmp << prescale) * NSEC_PER_SEC;
state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, rate);
/* get polarity */
val = readl(tpm->base + PWM_IMX_TPM_CnSC(pwm->hwpwm));
if ((val & PWM_IMX_TPM_CnSC_ELS) == PWM_IMX_TPM_CnSC_ELS_INVERSED)
state->polarity = PWM_POLARITY_INVERSED;
else
/*
* Assume reserved values (2b00 and 2b11) to yield
* normal polarity.
*/
state->polarity = PWM_POLARITY_NORMAL;
/* get channel status */
state->enabled = FIELD_GET(PWM_IMX_TPM_CnSC_ELS, val) ? true : false;
return 0;
}
/* this function is supposed to be called with mutex hold */
static int pwm_imx_tpm_apply_hw(struct pwm_chip *chip,
struct imx_tpm_pwm_param *p,
struct pwm_state *state,
struct pwm_device *pwm)
{
struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
bool period_update = false;
bool duty_update = false;
u32 val, cmod, cur_prescale;
unsigned long timeout;
struct pwm_state c;
if (state->period != tpm->real_period) {
/*
* TPM counter is shared by multiple channels, so
* prescale and period can NOT be modified when
* there are multiple channels in use with different
* period settings.
*/
if (tpm->user_count > 1)
return -EBUSY;
val = readl(tpm->base + PWM_IMX_TPM_SC);
cmod = FIELD_GET(PWM_IMX_TPM_SC_CMOD, val);
cur_prescale = FIELD_GET(PWM_IMX_TPM_SC_PS, val);
if (cmod && cur_prescale != p->prescale)
return -EBUSY;
/* set TPM counter prescale */
val &= ~PWM_IMX_TPM_SC_PS;
val |= FIELD_PREP(PWM_IMX_TPM_SC_PS, p->prescale);
writel(val, tpm->base + PWM_IMX_TPM_SC);
/*
* set period count:
* if the PWM is disabled (CMOD[1:0] = 2b00), then MOD register
* is updated when MOD register is written.
*
* if the PWM is enabled (CMOD[1:0] ≠ 2b00), the period length
* is latched into hardware when the next period starts.
*/
writel(p->mod, tpm->base + PWM_IMX_TPM_MOD);
tpm->real_period = state->period;
period_update = true;
}
pwm_imx_tpm_get_state(chip, pwm, &c);
/* polarity is NOT allowed to be changed if PWM is active */
if (c.enabled && c.polarity != state->polarity)
return -EBUSY;
if (state->duty_cycle != c.duty_cycle) {
/*
* set channel value:
* if the PWM is disabled (CMOD[1:0] = 2b00), then CnV register
* is updated when CnV register is written.
*
* if the PWM is enabled (CMOD[1:0] ≠ 2b00), the duty length
* is latched into hardware when the next period starts.
*/
writel(p->val, tpm->base + PWM_IMX_TPM_CnV(pwm->hwpwm));
duty_update = true;
}
/* make sure MOD & CnV registers are updated */
if (period_update || duty_update) {
timeout = jiffies + msecs_to_jiffies(tpm->real_period /
NSEC_PER_MSEC + 1);
while (readl(tpm->base + PWM_IMX_TPM_MOD) != p->mod
|| readl(tpm->base + PWM_IMX_TPM_CnV(pwm->hwpwm))
!= p->val) {
if (time_after(jiffies, timeout))
return -ETIME;
cpu_relax();
}
}
/*
* polarity settings will enabled/disable output status
* immediately, so if the channel is disabled, need to
* make sure MSA/MSB/ELS are set to 0 which means channel
* disabled.
*/
val = readl(tpm->base + PWM_IMX_TPM_CnSC(pwm->hwpwm));
val &= ~(PWM_IMX_TPM_CnSC_ELS | PWM_IMX_TPM_CnSC_MSA |
PWM_IMX_TPM_CnSC_MSB);
if (state->enabled) {
/*
* set polarity (for edge-aligned PWM modes)
*
* ELS[1:0] = 2b10 yields normal polarity behaviour,
* ELS[1:0] = 2b01 yields inversed polarity.
* The other values are reserved.
*/
val |= PWM_IMX_TPM_CnSC_MSB;
val |= (state->polarity == PWM_POLARITY_NORMAL) ?
PWM_IMX_TPM_CnSC_ELS_NORMAL :
PWM_IMX_TPM_CnSC_ELS_INVERSED;
}
writel(val, tpm->base + PWM_IMX_TPM_CnSC(pwm->hwpwm));
/* control the counter status */
if (state->enabled != c.enabled) {
val = readl(tpm->base + PWM_IMX_TPM_SC);
if (state->enabled) {
if (++tpm->enable_count == 1)
val |= PWM_IMX_TPM_SC_CMOD_INC_EVERY_CLK;
} else {
if (--tpm->enable_count == 0)
val &= ~PWM_IMX_TPM_SC_CMOD;
}
writel(val, tpm->base + PWM_IMX_TPM_SC);
}
return 0;
}
static int pwm_imx_tpm_apply(struct pwm_chip *chip,
struct pwm_device *pwm,
const struct pwm_state *state)
{
struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
struct imx_tpm_pwm_param param;
struct pwm_state real_state;
int ret;
ret = pwm_imx_tpm_round_state(chip, &param, &real_state, state);
if (ret)
return ret;
mutex_lock(&tpm->lock);
ret = pwm_imx_tpm_apply_hw(chip, &param, &real_state, pwm);
mutex_unlock(&tpm->lock);
return ret;
}
static int pwm_imx_tpm_request(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
mutex_lock(&tpm->lock);
tpm->user_count++;
mutex_unlock(&tpm->lock);
return 0;
}
static void pwm_imx_tpm_free(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
mutex_lock(&tpm->lock);
tpm->user_count--;
mutex_unlock(&tpm->lock);
}
static const struct pwm_ops imx_tpm_pwm_ops = {
.request = pwm_imx_tpm_request,
.free = pwm_imx_tpm_free,
.get_state = pwm_imx_tpm_get_state,
.apply = pwm_imx_tpm_apply,
};
static int pwm_imx_tpm_probe(struct platform_device *pdev)
{
struct imx_tpm_pwm_chip *tpm;
int ret;
u32 val;
tpm = devm_kzalloc(&pdev->dev, sizeof(*tpm), GFP_KERNEL);
if (!tpm)
return -ENOMEM;
platform_set_drvdata(pdev, tpm);
tpm->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(tpm->base))
return PTR_ERR(tpm->base);
tpm->clk = devm_clk_get_enabled(&pdev->dev, NULL);
if (IS_ERR(tpm->clk))
return dev_err_probe(&pdev->dev, PTR_ERR(tpm->clk),
"failed to get PWM clock\n");
tpm->chip.dev = &pdev->dev;
tpm->chip.ops = &imx_tpm_pwm_ops;
/* get number of channels */
val = readl(tpm->base + PWM_IMX_TPM_PARAM);
tpm->chip.npwm = FIELD_GET(PWM_IMX_TPM_PARAM_CHAN, val);
mutex_init(&tpm->lock);
ret = devm_pwmchip_add(&pdev->dev, &tpm->chip);
if (ret)
return dev_err_probe(&pdev->dev, ret, "failed to add PWM chip\n");
return 0;
}
static int __maybe_unused pwm_imx_tpm_suspend(struct device *dev)
{
struct imx_tpm_pwm_chip *tpm = dev_get_drvdata(dev);
if (tpm->enable_count > 0)
return -EBUSY;
/*
* Force 'real_period' to be zero to force period update code
* can be executed after system resume back, since suspend causes
* the period related registers to become their reset values.
*/
tpm->real_period = 0;
clk_disable_unprepare(tpm->clk);
return 0;
}
static int __maybe_unused pwm_imx_tpm_resume(struct device *dev)
{
struct imx_tpm_pwm_chip *tpm = dev_get_drvdata(dev);
int ret = 0;
ret = clk_prepare_enable(tpm->clk);
if (ret)
dev_err(dev, "failed to prepare or enable clock: %d\n", ret);
return ret;
}
static SIMPLE_DEV_PM_OPS(imx_tpm_pwm_pm,
pwm_imx_tpm_suspend, pwm_imx_tpm_resume);
static const struct of_device_id imx_tpm_pwm_dt_ids[] = {
{ .compatible = "fsl,imx7ulp-pwm", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, imx_tpm_pwm_dt_ids);
static struct platform_driver imx_tpm_pwm_driver = {
.driver = {
.name = "imx7ulp-tpm-pwm",
.of_match_table = imx_tpm_pwm_dt_ids,
.pm = &imx_tpm_pwm_pm,
},
.probe = pwm_imx_tpm_probe,
};
module_platform_driver(imx_tpm_pwm_driver);
MODULE_AUTHOR("Anson Huang <Anson.Huang@nxp.com>");
MODULE_DESCRIPTION("i.MX TPM PWM Driver");
MODULE_LICENSE("GPL v2");