ALSA: oxygen: Use standard printk helpers

Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/oxygen/oxygen_io.c b/sound/pci/oxygen/oxygen_io.c
index 3274907..4b8a32c 100644
--- a/sound/pci/oxygen/oxygen_io.c
+++ b/sound/pci/oxygen/oxygen_io.c
@@ -147,7 +147,7 @@
 			return;
 		}
 	}
-	snd_printk(KERN_ERR "AC'97 write timeout\n");
+	dev_err(chip->card->dev, "AC'97 write timeout\n");
 }
 EXPORT_SYMBOL(oxygen_write_ac97);
 
@@ -179,7 +179,7 @@
 			reg ^= 0xffff;
 		}
 	}
-	snd_printk(KERN_ERR "AC'97 read timeout on codec %u\n", codec);
+	dev_err(chip->card->dev, "AC'97 read timeout on codec %u\n", codec);
 	return 0;
 }
 EXPORT_SYMBOL(oxygen_read_ac97);
@@ -208,7 +208,7 @@
 						OXYGEN_SPI_BUSY) == 0)
 			return 0;
 	}
-	snd_printk(KERN_ERR "oxygen: SPI wait timeout\n");
+	dev_err(chip->card->dev, "oxygen: SPI wait timeout\n");
 	return -EIO;
 }
 
@@ -288,5 +288,5 @@
 		      & OXYGEN_EEPROM_BUSY))
 			return;
 	}
-	snd_printk(KERN_ERR "EEPROM write timeout\n");
+	dev_err(chip->card->dev, "EEPROM write timeout\n");
 }
diff --git a/sound/pci/oxygen/oxygen_lib.c b/sound/pci/oxygen/oxygen_lib.c
index efa610c..b67e306 100644
--- a/sound/pci/oxygen/oxygen_lib.c
+++ b/sound/pci/oxygen/oxygen_lib.c
@@ -313,7 +313,7 @@
 		oxygen_clear_bits8(chip, OXYGEN_MISC,
 				   OXYGEN_MISC_WRITE_PCI_SUBID);
 
-		snd_printk(KERN_INFO "EEPROM ID restored\n");
+		dev_info(chip->card->dev, "EEPROM ID restored\n");
 	}
 }
 
@@ -617,13 +617,13 @@
 
 	err = pci_request_regions(pci, DRIVER);
 	if (err < 0) {
-		snd_printk(KERN_ERR "cannot reserve PCI resources\n");
+		dev_err(card->dev, "cannot reserve PCI resources\n");
 		goto err_pci_enable;
 	}
 
 	if (!(pci_resource_flags(pci, 0) & IORESOURCE_IO) ||
 	    pci_resource_len(pci, 0) < OXYGEN_IO_SIZE) {
-		snd_printk(KERN_ERR "invalid PCI I/O range\n");
+		dev_err(card->dev, "invalid PCI I/O range\n");
 		err = -ENXIO;
 		goto err_pci_regions;
 	}
@@ -658,7 +658,7 @@
 	err = request_irq(pci->irq, oxygen_interrupt, IRQF_SHARED,
 			  KBUILD_MODNAME, chip);
 	if (err < 0) {
-		snd_printk(KERN_ERR "cannot grab interrupt %d\n", pci->irq);
+		dev_err(card->dev, "cannot grab interrupt %d\n", pci->irq);
 		goto err_card;
 	}
 	chip->irq = pci->irq;
@@ -796,7 +796,7 @@
 	pci_set_power_state(pci, PCI_D0);
 	pci_restore_state(pci);
 	if (pci_enable_device(pci) < 0) {
-		snd_printk(KERN_ERR "cannot reenable device");
+		dev_err(dev, "cannot reenable device");
 		snd_card_disconnect(card);
 		return -EIO;
 	}
diff --git a/sound/pci/oxygen/xonar_hdmi.c b/sound/pci/oxygen/xonar_hdmi.c
index 136dac6a..91d92bc 100644
--- a/sound/pci/oxygen/xonar_hdmi.c
+++ b/sound/pci/oxygen/xonar_hdmi.c
@@ -120,7 +120,7 @@
 	if (chip->uart_input_count >= 2 &&
 	    chip->uart_input[chip->uart_input_count - 2] == 'O' &&
 	    chip->uart_input[chip->uart_input_count - 1] == 'K') {
-		printk(KERN_DEBUG "message from HDMI chip received:\n");
+		dev_dbg(chip->card->dev, "message from HDMI chip received:\n");
 		print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
 				     chip->uart_input, chip->uart_input_count);
 		chip->uart_input_count = 0;
diff --git a/sound/pci/oxygen/xonar_lib.c b/sound/pci/oxygen/xonar_lib.c
index 0ebe7f5..706b1a4 100644
--- a/sound/pci/oxygen/xonar_lib.c
+++ b/sound/pci/oxygen/xonar_lib.c
@@ -56,9 +56,9 @@
 	if (has_power != data->has_power) {
 		data->has_power = has_power;
 		if (has_power) {
-			snd_printk(KERN_NOTICE "power restored\n");
+			dev_notice(chip->card->dev, "power restored\n");
 		} else {
-			snd_printk(KERN_CRIT
+			dev_crit(chip->card->dev,
 				   "Hey! Don't unplug the power cable!\n");
 			/* TODO: stop PCMs */
 		}