ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memory
On boards with more than 2GB of RAM booting goes wrong with things not
working and we're getting lots of l3 warnings:
WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_noc.c:147
l3_interrupt_handler+0x260/0x384()
44000000.ocp:L3 Custom Error: MASTER MMC6 TARGET DMM1 (Idle):
Data Access in User mode during Functional access
...
[<c044e158>] (scsi_add_host_with_dma) from [<c04705c8>]
(ata_scsi_add_hosts+0x5c/0x18c)
[<c04705c8>] (ata_scsi_add_hosts) from [<c046b13c>]
(ata_host_register+0x150/0x2cc)
[<c046b13c>] (ata_host_register) from [<c046b38c>]
(ata_host_activate+0xd4/0x124)
[<c046b38c>] (ata_host_activate) from [<c047f42c>]
(ahci_host_activate+0x5c/0x194)
[<c047f42c>] (ahci_host_activate) from [<c0480854>]
(ahci_platform_init_host+0x1f0/0x3f0)
[<c0480854>] (ahci_platform_init_host) from [<c047c9dc>]
(ahci_probe+0x70/0x98)
[<c047c9dc>] (ahci_probe) from [<c04220cc>]
(platform_drv_probe+0x54/0xb4)
Let's fix the issue by enabling ZONE_DMA for LPAE. Note that we need to
limit dma_zone_size to 2GB as the rest of the RAM is beyond the 4GB limit.
Let's also fix things for dra7 as done in similar patches in the TI tree
by Lokesh Vutla <lokeshvutla@ti.com>.
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index b3a0dff..33d1460 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -49,6 +49,7 @@
select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
select PM_OPP if PM
+ select ZONE_DMA if ARM_LPAE
config SOC_AM33XX
bool "TI AM33XX"
@@ -78,6 +79,7 @@
select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
select PM_OPP if PM
+ select ZONE_DMA if ARM_LPAE
config ARCH_OMAP2PLUS
bool
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 6133eaa..6b59230 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -243,6 +243,9 @@
};
DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)")
+#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
+ .dma_zone_size = SZ_2G,
+#endif
.reserve = omap_reserve,
.smp = smp_ops(omap4_smp_ops),
.map_io = omap5_map_io,
@@ -288,6 +291,9 @@
};
DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)")
+#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
+ .dma_zone_size = SZ_2G,
+#endif
.reserve = omap_reserve,
.smp = smp_ops(omap4_smp_ops),
.map_io = dra7xx_map_io,
@@ -308,6 +314,9 @@
};
DT_MACHINE_START(DRA72X_DT, "Generic DRA72X (Flattened Device Tree)")
+#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
+ .dma_zone_size = SZ_2G,
+#endif
.reserve = omap_reserve,
.map_io = dra7xx_map_io,
.init_early = dra7xx_init_early,
