Merge branch '2.6.37-rc4-pvhvm-fixes' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm
* '2.6.37-rc4-pvhvm-fixes' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm:
xen: unplug the emulated devices at resume time
xen: fix save/restore for PV on HVM guests with pirq remapping
xen: resume the pv console for hvm guests too
xen: fix MSI setup and teardown for PV on HVM guests
xen: use PHYSDEVOP_get_free_pirq to implement find_unbound_pirq
diff --git a/Documentation/ABI/testing/sysfs-bus-rbd b/Documentation/ABI/testing/sysfs-bus-rbd
new file mode 100644
index 0000000..90a87e2
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-rbd
@@ -0,0 +1,83 @@
+What: /sys/bus/rbd/
+Date: November 2010
+Contact: Yehuda Sadeh <yehuda@hq.newdream.net>,
+ Sage Weil <sage@newdream.net>
+Description:
+
+Being used for adding and removing rbd block devices.
+
+Usage: <mon ip addr> <options> <pool name> <rbd image name> [snap name]
+
+ $ echo "192.168.0.1 name=admin rbd foo" > /sys/bus/rbd/add
+
+The snapshot name can be "-" or omitted to map the image read/write. A <dev-id>
+will be assigned for any registered block device. If snapshot is used, it will
+be mapped read-only.
+
+Removal of a device:
+
+ $ echo <dev-id> > /sys/bus/rbd/remove
+
+Entries under /sys/bus/rbd/devices/<dev-id>/
+--------------------------------------------
+
+client_id
+
+ The ceph unique client id that was assigned for this specific session.
+
+major
+
+ The block device major number.
+
+name
+
+ The name of the rbd image.
+
+pool
+
+ The pool where this rbd image resides. The pool-name pair is unique
+ per rados system.
+
+size
+
+ The size (in bytes) of the mapped block device.
+
+refresh
+
+ Writing to this file will reread the image header data and set
+ all relevant datastructures accordingly.
+
+current_snap
+
+ The current snapshot for which the device is mapped.
+
+create_snap
+
+ Create a snapshot:
+
+ $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_create
+
+rollback_snap
+
+ Rolls back data to the specified snapshot. This goes over the entire
+ list of rados blocks and sends a rollback command to each.
+
+ $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_rollback
+
+snap_*
+
+ A directory per each snapshot
+
+
+Entries under /sys/bus/rbd/devices/<dev-id>/snap_<snap-name>
+-------------------------------------------------------------
+
+id
+
+ The rados internal snapshot id assigned for this snapshot
+
+size
+
+ The size of the image when this snapshot was taken.
+
+
diff --git a/Documentation/driver-model/interface.txt b/Documentation/driver-model/interface.txt
deleted file mode 100644
index c66912bf..0000000
--- a/Documentation/driver-model/interface.txt
+++ /dev/null
@@ -1,129 +0,0 @@
-
-Device Interfaces
-
-Introduction
-~~~~~~~~~~~~
-
-Device interfaces are the logical interfaces of device classes that correlate
-directly to userspace interfaces, like device nodes.
-
-Each device class may have multiple interfaces through which you can
-access the same device. An input device may support the mouse interface,
-the 'evdev' interface, and the touchscreen interface. A SCSI disk would
-support the disk interface, the SCSI generic interface, and possibly a raw
-device interface.
-
-Device interfaces are registered with the class they belong to. As devices
-are added to the class, they are added to each interface registered with
-the class. The interface is responsible for determining whether the device
-supports the interface or not.
-
-
-Programming Interface
-~~~~~~~~~~~~~~~~~~~~~
-
-struct device_interface {
- char * name;
- rwlock_t lock;
- u32 devnum;
- struct device_class * devclass;
-
- struct list_head node;
- struct driver_dir_entry dir;
-
- int (*add_device)(struct device *);
- int (*add_device)(struct intf_data *);
-};
-
-int interface_register(struct device_interface *);
-void interface_unregister(struct device_interface *);
-
-
-An interface must specify the device class it belongs to. It is added
-to that class's list of interfaces on registration.
-
-
-Interfaces can be added to a device class at any time. Whenever it is
-added, each device in the class is passed to the interface's
-add_device callback. When an interface is removed, each device is
-removed from the interface.
-
-
-Devices
-~~~~~~~
-Once a device is added to a device class, it is added to each
-interface that is registered with the device class. The class
-is expected to place a class-specific data structure in
-struct device::class_data. The interface can use that (along with
-other fields of struct device) to determine whether or not the driver
-and/or device support that particular interface.
-
-
-Data
-~~~~
-
-struct intf_data {
- struct list_head node;
- struct device_interface * intf;
- struct device * dev;
- u32 intf_num;
-};
-
-int interface_add_data(struct interface_data *);
-
-The interface is responsible for allocating and initializing a struct
-intf_data and calling interface_add_data() to add it to the device's list
-of interfaces it belongs to. This list will be iterated over when the device
-is removed from the class (instead of all possible interfaces for a class).
-This structure should probably be embedded in whatever per-device data
-structure the interface is allocating anyway.
-
-Devices are enumerated within the interface. This happens in interface_add_data()
-and the enumerated value is stored in the struct intf_data for that device.
-
-sysfs
-~~~~~
-Each interface is given a directory in the directory of the device
-class it belongs to:
-
-Interfaces get a directory in the class's directory as well:
-
- class/
- `-- input
- |-- devices
- |-- drivers
- |-- mouse
- `-- evdev
-
-When a device is added to the interface, a symlink is created that points
-to the device's directory in the physical hierarchy:
-
- class/
- `-- input
- |-- devices
- | `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
- |-- drivers
- | `-- usb:usb_mouse -> ../../../bus/drivers/usb_mouse/
- |-- mouse
- | `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
- `-- evdev
- `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
-
-
-Future Plans
-~~~~~~~~~~~~
-A device interface is correlated directly with a userspace interface
-for a device, specifically a device node. For instance, a SCSI disk
-exposes at least two interfaces to userspace: the standard SCSI disk
-interface and the SCSI generic interface. It might also export a raw
-device interface.
-
-Many interfaces have a major number associated with them and each
-device gets a minor number. Or, multiple interfaces might share one
-major number, and each will receive a range of minor numbers (like in
-the case of input devices).
-
-These major and minor numbers could be stored in the interface
-structure. Major and minor allocations could happen when the interface
-is registered with the class, or via a helper function.
-
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index ed7e5ef..55c28b7 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -660,11 +660,10 @@
releasepage: releasepage is called on PagePrivate pages to indicate
that the page should be freed if possible. ->releasepage
should remove any private data from the page and clear the
- PagePrivate flag. It may also remove the page from the
- address_space. If this fails for some reason, it may indicate
- failure with a 0 return value.
- This is used in two distinct though related cases. The first
- is when the VM finds a clean page with no active users and
+ PagePrivate flag. If releasepage() fails for some reason, it must
+ indicate failure with a 0 return value.
+ releasepage() is used in two distinct though related cases. The
+ first is when the VM finds a clean page with no active users and
wants to make it a free page. If ->releasepage succeeds, the
page will be removed from the address_space and become free.
diff --git a/MAINTAINERS b/MAINTAINERS
index b3be8b3..1a1c27b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2060,7 +2060,7 @@
DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS
M: Greg Kroah-Hartman <gregkh@suse.de>
-T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6.git
S: Supported
F: Documentation/kobject.txt
F: drivers/base/
@@ -2080,7 +2080,7 @@
INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
M: Chris Wilson <chris@chris-wilson.co.uk>
-L: intel-gfx@lists.freedesktop.org
+L: intel-gfx@lists.freedesktop.org (subscribers-only)
L: dri-devel@lists.freedesktop.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel.git
S: Supported
@@ -4064,9 +4064,8 @@
NETEFFECT IWARP RNIC DRIVER (IW_NES)
M: Faisal Latif <faisal.latif@intel.com>
-M: Chien Tung <chien.tin.tung@intel.com>
L: linux-rdma@vger.kernel.org
-W: http://www.neteffect.com
+W: http://www.intel.com/Products/Server/Adapters/Server-Cluster/Server-Cluster-overview.htm
S: Supported
F: drivers/infiniband/hw/nes/
diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig
new file mode 100644
index 0000000..38cb7c9
--- /dev/null
+++ b/arch/arm/configs/at91rm9200_defconfig
@@ -0,0 +1,341 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_MACH_ONEARM=y
+CONFIG_ARCH_AT91RM9200DK=y
+CONFIG_MACH_AT91RM9200EK=y
+CONFIG_MACH_CSB337=y
+CONFIG_MACH_CSB637=y
+CONFIG_MACH_CARMEVA=y
+CONFIG_MACH_ATEB9200=y
+CONFIG_MACH_KB9200=y
+CONFIG_MACH_PICOTUX2XX=y
+CONFIG_MACH_KAFA=y
+CONFIG_MACH_ECBAT91=y
+CONFIG_MACH_YL9200=y
+CONFIG_MACH_CPUAT91=y
+CONFIG_MACH_ECO920=y
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=100
+# CONFIG_ARM_THUMB is not set
+CONFIG_PCCARD=y
+CONFIG_AT91_CF=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ZBOOT_ROM_TEXT=0x10000000
+CONFIG_ZBOOT_ROM_BSS=0x20040000
+CONFIG_KEXEC=y
+CONFIG_FPE_NWFPE=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_PLATFORM=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_ATMEL_TCLIB=y
+CONFIG_EEPROM_LEGACY=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_TUN=m
+CONFIG_PHYLIB=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_MICREL_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_ARM_AT91_ETHER=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=y
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_BITBANG=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HWMON=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+CONFIG_FB_S1D13XXX=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_DISPLAY_SUPPORT=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_MINI_4x6=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_KEYSPAN=y
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_MCT_U232=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_MMC=y
+CONFIG_MMC_AT91=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_REISERFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=m
+CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_CRAMFS=y
+CONFIG_MINIX_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_SMB_FS=m
+CONFIG_CIFS=m
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_FTRACE is not set
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_SHA1=y
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
deleted file mode 100644
index 4438e64..0000000
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ /dev/null
@@ -1,72 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200DK=y
-CONFIG_MACH_ECO920=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
deleted file mode 100644
index ccd517c..0000000
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ /dev/null
@@ -1,73 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_AT91RM9200EK=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_S1D13XXX=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig
deleted file mode 100644
index 1b0e9a1..0000000
--- a/arch/arm/configs/ateb9200_defconfig
+++ /dev/null
@@ -1,131 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_ATEB9200=y
-CONFIG_PCCARD=m
-CONFIG_AT91_CF=m
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK_RO=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_TUN=m
-CONFIG_PHYLIB=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_GL620A=y
-CONFIG_USB_NET_PLUSB=y
-CONFIG_USB_NET_RNDIS_HOST=y
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_GPIO=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_USB_HID=m
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=m
-CONFIG_MMC_DEBUG=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-CONFIG_REISERFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NTFS_FS=m
-CONFIG_NTFS_RW=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRC16=m
-CONFIG_LIBCRC32C=m
diff --git a/arch/arm/configs/carmeva_defconfig b/arch/arm/configs/carmeva_defconfig
deleted file mode 100644
index ac64dbd..0000000
--- a/arch/arm/configs/carmeva_defconfig
+++ /dev/null
@@ -1,47 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_HOTPLUG is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CARMEVA=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO=m
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_MMC=m
-CONFIG_MMC_DEBUG=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_DNOTIFY is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
diff --git a/arch/arm/configs/cpuat91_defconfig b/arch/arm/configs/cpuat91_defconfig
deleted file mode 100644
index 022aeb5..0000000
--- a/arch/arm/configs/cpuat91_defconfig
+++ /dev/null
@@ -1,112 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CPUAT91=y
-CONFIG_AT91_TIMER_HZ=100
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_CRAMFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
deleted file mode 100644
index a24c448..0000000
--- a/arch/arm/configs/csb337_defconfig
+++ /dev/null
@@ -1,104 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CSB337=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
-CONFIG_SCSI=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_KEYSPAN=y
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_MCT_U232=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
-# CONFIG_RTC_INTF_SYSFS is not set
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
deleted file mode 100644
index 98552ad..0000000
--- a/arch/arm/configs/csb637_defconfig
+++ /dev/null
@@ -1,98 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CSB637=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_KEYSPAN=y
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_MCT_U232=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig
deleted file mode 100644
index 6bb6abd..0000000
--- a/arch/arm/configs/ecbat91_defconfig
+++ /dev/null
@@ -1,99 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_ECBAT91=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_PREEMPT=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_AFS_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_PRINTER=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_REISERFS_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_SHA1=y
diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig
deleted file mode 100644
index 896dbe0..0000000
--- a/arch/arm/configs/kafa_defconfig
+++ /dev/null
@@ -1,61 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_KAFA=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK_RO=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig
deleted file mode 100644
index 9f906a8..0000000
--- a/arch/arm/configs/kb9202_defconfig
+++ /dev/null
@@ -1,127 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_KB9200=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x10000000
-CONFIG_ZBOOT_ROM_BSS=0x20040000
-CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_SSC=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_AT91RM9200_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig
deleted file mode 100644
index 1579857..0000000
--- a/arch/arm/configs/onearm_defconfig
+++ /dev/null
@@ -1,80 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_ONEARM=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig
deleted file mode 100644
index 4c9afa4..0000000
--- a/arch/arm/configs/picotux200_defconfig
+++ /dev/null
@@ -1,242 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=m
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_PICOTUX2XX=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=m
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_PPP=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_GPIO=m
-CONFIG_HWMON=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_ADM1025=m
-CONFIG_SENSORS_ADM1026=m
-CONFIG_SENSORS_ADM1029=m
-CONFIG_SENSORS_ADM1031=m
-CONFIG_SENSORS_ADM9240=m
-CONFIG_SENSORS_DS1621=m
-CONFIG_SENSORS_GL518SM=m
-CONFIG_SENSORS_GL520SM=m
-CONFIG_SENSORS_IT87=m
-CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM77=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM80=m
-CONFIG_SENSORS_LM83=m
-CONFIG_SENSORS_LM85=m
-CONFIG_SENSORS_LM87=m
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_LM92=m
-CONFIG_SENSORS_MAX1619=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_SMSC47B397=m
-CONFIG_SENSORS_W83781D=m
-CONFIG_SENSORS_W83791D=m
-CONFIG_SENSORS_W83792D=m
-CONFIG_SENSORS_W83793=m
-CONFIG_SENSORS_W83L785TS=m
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=m
-CONFIG_HID=m
-CONFIG_USB=m
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_MMC=m
-CONFIG_MMC_AT91=m
-CONFIG_RTC_CLASS=m
-CONFIG_RTC_DRV_AT91RM9200=m
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NTFS_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=m
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_AMIGA_PARTITION=y
-CONFIG_NLS_DEFAULT="utf-8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_LIBCRC32C=m
diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig
deleted file mode 100644
index 30c537f..0000000
--- a/arch/arm/configs/yl9200_defconfig
+++ /dev/null
@@ -1,137 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200DK=y
-CONFIG_MACH_YL9200=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=3
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_SPI=y
-CONFIG_SPI_DEBUG=y
-CONFIG_SPI_ATMEL=y
-CONFIG_FB=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT3_FS=y
-CONFIG_REISERFS_FS=y
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_SLUB_DEBUG_ON=y
-CONFIG_DEBUG_KOBJECT=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LIST=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 821eb84..62d686f 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -24,8 +24,8 @@
# AT91RM9200 board-specific support
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
-obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o
-obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o
+obj-$(CONFIG_ARCH_AT91RM9200DK) += board-rm9200dk.o
+obj-$(CONFIG_MACH_AT91RM9200EK) += board-rm9200ek.o
obj-$(CONFIG_MACH_CSB337) += board-csb337.o
obj-$(CONFIG_MACH_CSB637) += board-csb637.o
obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 9338825..7b53922 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -1106,51 +1106,6 @@
static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
struct platform_device *atmel_default_console_device; /* the serial console device */
-void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-{
- int i;
-
- /* Fill in list of supported UARTs */
- for (i = 0; i < config->nr_tty; i++) {
- switch (config->tty_map[i]) {
- case 0:
- configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_uarts[i] = &at91rm9200_uart0_device;
- at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
- break;
- case 1:
- configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
- at91_uarts[i] = &at91rm9200_uart1_device;
- at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
- break;
- case 2:
- configure_usart2_pins(0);
- at91_uarts[i] = &at91rm9200_uart2_device;
- at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
- break;
- case 3:
- configure_usart3_pins(0);
- at91_uarts[i] = &at91rm9200_uart3_device;
- at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
- break;
- case 4:
- configure_dbgu_pins();
- at91_uarts[i] = &at91rm9200_dbgu_device;
- at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart");
- break;
- default:
- continue;
- }
- at91_uarts[i]->id = i; /* update ID number to mapped ID */
- }
-
- /* Set serial console device */
- if (config->console_tty < ATMEL_MAX_UART)
- atmel_default_console_device = at91_uarts[config->console_tty];
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
struct platform_device *pdev;
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 46bdc82..8a3fc84 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -39,24 +39,24 @@
#include "generic.h"
-/*
- * Serial port configuration.
- * 0 .. 3 = USART0 .. USART3
- * 4 = DBGU
- */
-static struct at91_uart_config __initdata onearm_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 3,
- .tty_map = { 4, 0, 1, -1, -1 }, /* ttyS0, ..., ttyS4 */
-};
-
static void __init onearm_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91rm9200_initialize(18432000, AT91RM9200_PQFP);
- /* Setup the serial ports and console */
- at91_init_serial(&onearm_uart_config);
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
}
static void __init onearm_init_irq(void)
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index c0ce79d4..d2e1f4e 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -39,17 +39,6 @@
#include "generic.h"
-/*
- * Serial port configuration.
- * 0 .. 3 = USART0 .. USART3
- * 4 = DBGU
- */
-static struct at91_uart_config __initdata kafa_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 2,
- .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
-};
-
static void __init kafa_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
@@ -58,8 +47,14 @@
/* Set up the LEDs */
at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
- /* Setup the serial ports and console */
- at91_init_serial(&kafa_uart_config);
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
}
static void __init kafa_init_irq(void)
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 9d833bbc..55dad3a 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -43,24 +43,21 @@
#include "generic.h"
-/*
- * Serial port configuration.
- * 0 .. 3 = USART0 .. USART3
- * 4 = DBGU
- */
-static struct at91_uart_config __initdata picotux200_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 2,
- .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
-};
-
static void __init picotux200_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91rm9200_initialize(18432000, AT91RM9200_BGA);
- /* Setup the serial ports and console */
- at91_init_serial(&picotux200_uart_config);
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
}
static void __init picotux200_init_irq(void)
@@ -77,11 +74,6 @@
.ports = 1,
};
-// static struct at91_udc_data __initdata picotux200_udc_data = {
-// .vbus_pin = AT91_PIN_PD4,
-// .pullup_pin = AT91_PIN_PD5,
-// };
-
static struct at91_mmc_data __initdata picotux200_mmc_data = {
.det_pin = AT91_PIN_PB27,
.slot_b = 0,
@@ -89,21 +81,6 @@
.wp_pin = AT91_PIN_PA17,
};
-// static struct spi_board_info picotux200_spi_devices[] = {
-// { /* DataFlash chip */
-// .modalias = "mtd_dataflash",
-// .chip_select = 0,
-// .max_speed_hz = 15 * 1000 * 1000,
-// },
-// #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-// { /* DataFlash card */
-// .modalias = "mtd_dataflash",
-// .chip_select = 3,
-// .max_speed_hz = 15 * 1000 * 1000,
-// },
-// #endif
-// };
-
#define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0
#define PICOTUX200_FLASH_SIZE SZ_4M
@@ -135,21 +112,11 @@
at91_add_device_eth(&picotux200_eth_data);
/* USB Host */
at91_add_device_usbh(&picotux200_usbh_data);
- /* USB Device */
- // at91_add_device_udc(&picotux200_udc_data);
- // at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
/* I2C */
at91_add_device_i2c(NULL, 0);
- /* SPI */
- // at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices));
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
- /* DataFlash card */
- at91_set_gpio_output(AT91_PIN_PB22, 0);
-#else
/* MMC */
at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
at91_add_device_mmc(0, &picotux200_mmc_data);
-#endif
/* NOR Flash */
platform_device_register(&picotux200_flash);
}
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-rm9200dk.c
similarity index 98%
rename from arch/arm/mach-at91/board-dk.c
rename to arch/arm/mach-at91/board-rm9200dk.c
index e14f0e1..4c1047c 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-at91/board-dk.c
+ * linux/arch/arm/mach-at91/board-rm9200dk.c
*
* Copyright (C) 2005 SAN People
*
@@ -91,10 +91,12 @@
// .vcc_pin = ... always powered
};
+#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
static struct at91_mmc_data __initdata dk_mmc_data = {
.slot_b = 0,
.wire4 = 1,
};
+#endif
static struct spi_board_info dk_spi_devices[] = {
{ /* DataFlash chip */
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-rm9200ek.c
similarity index 97%
rename from arch/arm/mach-at91/board-ek.c
rename to arch/arm/mach-at91/board-rm9200ek.c
index 56e92c4..9df1be8 100644
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-at91/board-ek.c
+ * linux/arch/arm/mach-at91/board-rm9200ek.c
*
* Copyright (C) 2005 SAN People
*
@@ -84,12 +84,14 @@
.pullup_pin = AT91_PIN_PD5,
};
+#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
static struct at91_mmc_data __initdata ek_mmc_data = {
.det_pin = AT91_PIN_PB27,
.slot_b = 0,
.wire4 = 1,
.wp_pin = AT91_PIN_PA17,
};
+#endif
static struct spi_board_info ek_spi_devices[] = {
{ /* DataFlash chip */
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 89df00a..e0f0080 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -387,7 +387,7 @@
* EPSON S1D13806 FB (discontinued chip)
* EPSON S1D13506 FB
*/
-#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE)
+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
#include <video/s1d13xxxfb.h>
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 58528aa..2b499eb 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -137,13 +137,7 @@
extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
extern void __init at91_set_serial_console(unsigned portnr);
-struct at91_uart_config {
- unsigned short console_tty; /* tty number of serial console */
- unsigned short nr_tty; /* number of serial tty's */
- short tty_map[]; /* map UART to tty number */
-};
extern struct platform_device *atmel_default_console_device;
-extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
struct atmel_uart_data {
short use_dma_tx; /* use transmit DMA? */
diff --git a/arch/mn10300/include/asm/syscall.h b/arch/mn10300/include/asm/syscall.h
new file mode 100644
index 0000000..b44b0bb
--- /dev/null
+++ b/arch/mn10300/include/asm/syscall.h
@@ -0,0 +1,117 @@
+/* Access to user system call parameters and results
+ *
+ * See asm-generic/syscall.h for function descriptions.
+ *
+ * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SYSCALL_H
+#define _ASM_SYSCALL_H
+
+#include <linux/sched.h>
+#include <linux/err.h>
+
+extern const unsigned long sys_call_table[];
+
+static inline int syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
+{
+ return regs->orig_d0;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ regs->d0 = regs->orig_d0;
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ unsigned long error = regs->d0;
+ return IS_ERR_VALUE(error) ? error : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ return regs->d0;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+ struct pt_regs *regs,
+ int error, long val)
+{
+ regs->d0 = (long) error ?: val;
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+ struct pt_regs *regs,
+ unsigned int i, unsigned int n,
+ unsigned long *args)
+{
+ switch (i) {
+ case 0:
+ if (!n--) break;
+ *args++ = regs->a0;
+ case 1:
+ if (!n--) break;
+ *args++ = regs->d1;
+ case 2:
+ if (!n--) break;
+ *args++ = regs->a3;
+ case 3:
+ if (!n--) break;
+ *args++ = regs->a2;
+ case 4:
+ if (!n--) break;
+ *args++ = regs->d3;
+ case 5:
+ if (!n--) break;
+ *args++ = regs->d2;
+ case 6:
+ if (!n--) break;
+ default:
+ BUG();
+ break;
+ }
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+ struct pt_regs *regs,
+ unsigned int i, unsigned int n,
+ const unsigned long *args)
+{
+ switch (i) {
+ case 0:
+ if (!n--) break;
+ regs->a0 = *args++;
+ case 1:
+ if (!n--) break;
+ regs->d1 = *args++;
+ case 2:
+ if (!n--) break;
+ regs->a3 = *args++;
+ case 3:
+ if (!n--) break;
+ regs->a2 = *args++;
+ case 4:
+ if (!n--) break;
+ regs->d3 = *args++;
+ case 5:
+ if (!n--) break;
+ regs->d2 = *args++;
+ case 6:
+ if (!n--) break;
+ default:
+ BUG();
+ break;
+ }
+}
+
+#endif /* _ASM_SYSCALL_H */
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 2eaeb9e..f48c492 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -720,32 +720,6 @@
};
/* FSI */
-/*
- * FSI-B use external clock which came from da7210.
- * So, we should change parent of fsi
- */
-#define FCLKBCR 0xa415000c
-static void fsimck_init(struct clk *clk)
-{
- u32 status = __raw_readl(clk->enable_reg);
-
- /* use external clock */
- status &= ~0x000000ff;
- status |= 0x00000080;
-
- __raw_writel(status, clk->enable_reg);
-}
-
-static struct clk_ops fsimck_clk_ops = {
- .init = fsimck_init,
-};
-
-static struct clk fsimckb_clk = {
- .ops = &fsimck_clk_ops,
- .enable_reg = (void __iomem *)FCLKBCR,
- .rate = 0, /* unknown */
-};
-
static struct sh_fsi_platform_info fsi_info = {
.portb_flags = SH_FSI_BRS_INV |
SH_FSI_OUT_SLAVE_MODE |
@@ -1264,10 +1238,10 @@
/* change parent of FSI B */
clk = clk_get(NULL, "fsib_clk");
if (!IS_ERR(clk)) {
- clk_register(&fsimckb_clk);
- clk_set_parent(clk, &fsimckb_clk);
- clk_set_rate(clk, 11000);
- clk_set_rate(&fsimckb_clk, 11000);
+ /* 48kHz dummy clock was used to make sure 1/1 divide */
+ clk_set_rate(&sh7724_fsimckb_clk, 48000);
+ clk_set_parent(clk, &sh7724_fsimckb_clk);
+ clk_set_rate(clk, 48000);
clk_put(clk);
}
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index c31d228..527a0cd 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -283,31 +283,6 @@
};
/* FSI */
-/*
- * FSI-A use external clock which came from ak464x.
- * So, we should change parent of fsi
- */
-#define FCLKACR 0xa4150008
-static void fsimck_init(struct clk *clk)
-{
- u32 status = __raw_readl(clk->enable_reg);
-
- /* use external clock */
- status &= ~0x000000ff;
- status |= 0x00000080;
- __raw_writel(status, clk->enable_reg);
-}
-
-static struct clk_ops fsimck_clk_ops = {
- .init = fsimck_init,
-};
-
-static struct clk fsimcka_clk = {
- .ops = &fsimck_clk_ops,
- .enable_reg = (void __iomem *)FCLKACR,
- .rate = 0, /* unknown */
-};
-
/* change J20, J21, J22 pin to 1-2 connection to use slave mode */
static struct sh_fsi_platform_info fsi_info = {
.porta_flags = SH_FSI_BRS_INV |
@@ -852,37 +827,29 @@
gpio_request(GPIO_FN_KEYOUT0, NULL);
/* enable FSI */
- gpio_request(GPIO_FN_FSIMCKB, NULL);
gpio_request(GPIO_FN_FSIMCKA, NULL);
+ gpio_request(GPIO_FN_FSIIASD, NULL);
gpio_request(GPIO_FN_FSIOASD, NULL);
gpio_request(GPIO_FN_FSIIABCK, NULL);
gpio_request(GPIO_FN_FSIIALRCK, NULL);
gpio_request(GPIO_FN_FSIOABCK, NULL);
gpio_request(GPIO_FN_FSIOALRCK, NULL);
gpio_request(GPIO_FN_CLKAUDIOAO, NULL);
- gpio_request(GPIO_FN_FSIIBSD, NULL);
- gpio_request(GPIO_FN_FSIOBSD, NULL);
- gpio_request(GPIO_FN_FSIIBBCK, NULL);
- gpio_request(GPIO_FN_FSIIBLRCK, NULL);
- gpio_request(GPIO_FN_FSIOBBCK, NULL);
- gpio_request(GPIO_FN_FSIOBLRCK, NULL);
- gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
- gpio_request(GPIO_FN_FSIIASD, NULL);
/* set SPU2 clock to 83.4 MHz */
clk = clk_get(NULL, "spu_clk");
- if (clk) {
+ if (!IS_ERR(clk)) {
clk_set_rate(clk, clk_round_rate(clk, 83333333));
clk_put(clk);
}
/* change parent of FSI A */
clk = clk_get(NULL, "fsia_clk");
- if (clk) {
- clk_register(&fsimcka_clk);
- clk_set_parent(clk, &fsimcka_clk);
- clk_set_rate(clk, 11000);
- clk_set_rate(&fsimcka_clk, 11000);
+ if (!IS_ERR(clk)) {
+ /* 48kHz dummy clock was used to make sure 1/1 divide */
+ clk_set_rate(&sh7724_fsimcka_clk, 48000);
+ clk_set_parent(clk, &sh7724_fsimcka_clk);
+ clk_set_rate(clk, 48000);
clk_put(clk);
}
diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index 1f4e562..82e1eab 100644
--- a/arch/sh/include/asm/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -96,7 +96,7 @@
void *kmap_coherent(struct page *page, unsigned long addr);
void kunmap_coherent(void *kvaddr);
-#define PG_dcache_dirty PG_arch_1
+#define PG_dcache_clean PG_arch_1
void cpu_cache_init(void);
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h
index 4c27b68..7eb4359 100644
--- a/arch/sh/include/cpu-sh4/cpu/sh7724.h
+++ b/arch/sh/include/cpu-sh4/cpu/sh7724.h
@@ -303,4 +303,7 @@
SHDMA_SLAVE_SDHI1_RX,
};
+extern struct clk sh7724_fsimcka_clk;
+extern struct clk sh7724_fsimckb_clk;
+
#endif /* __ASM_SH7724_H__ */
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
index 0fe2e93..271c0b32 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -111,12 +111,21 @@
.parent = &pll_clk,
};
+/* External input clock (pin name: FSIMCKA/FSIMCKB ) */
+struct clk sh7724_fsimcka_clk = {
+};
+
+struct clk sh7724_fsimckb_clk = {
+};
+
static struct clk *main_clks[] = {
&r_clk,
&extal_clk,
&fll_clk,
&pll_clk,
&div3_clk,
+ &sh7724_fsimcka_clk,
+ &sh7724_fsimckb_clk,
};
static void div4_kick(struct clk *clk)
@@ -154,16 +163,38 @@
[DIV4_M1] = DIV4(FRQCRB, 4, 0x2f7c, CLK_ENABLE_ON_INIT),
};
-enum { DIV6_V, DIV6_FA, DIV6_FB, DIV6_I, DIV6_S, DIV6_NR };
+enum { DIV6_V, DIV6_I, DIV6_S, DIV6_NR };
static struct clk div6_clks[DIV6_NR] = {
[DIV6_V] = SH_CLK_DIV6(&div3_clk, VCLKCR, 0),
- [DIV6_FA] = SH_CLK_DIV6(&div3_clk, FCLKACR, 0),
- [DIV6_FB] = SH_CLK_DIV6(&div3_clk, FCLKBCR, 0),
[DIV6_I] = SH_CLK_DIV6(&div3_clk, IRDACLKCR, 0),
[DIV6_S] = SH_CLK_DIV6(&div3_clk, SPUCLKCR, CLK_ENABLE_ON_INIT),
};
+enum { DIV6_FA, DIV6_FB, DIV6_REPARENT_NR };
+
+/* Indices are important - they are the actual src selecting values */
+static struct clk *fclkacr_parent[] = {
+ [0] = &div3_clk,
+ [1] = NULL,
+ [2] = &sh7724_fsimcka_clk,
+ [3] = NULL,
+};
+
+static struct clk *fclkbcr_parent[] = {
+ [0] = &div3_clk,
+ [1] = NULL,
+ [2] = &sh7724_fsimckb_clk,
+ [3] = NULL,
+};
+
+static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
+ [DIV6_FA] = SH_CLK_DIV6_EXT(&div3_clk, FCLKACR, 0,
+ fclkacr_parent, ARRAY_SIZE(fclkacr_parent), 6, 2),
+ [DIV6_FB] = SH_CLK_DIV6_EXT(&div3_clk, FCLKBCR, 0,
+ fclkbcr_parent, ARRAY_SIZE(fclkbcr_parent), 6, 2),
+};
+
static struct clk mstp_clks[HWBLK_NR] = {
SH_HWBLK_CLK(HWBLK_TLB, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT),
SH_HWBLK_CLK(HWBLK_IC, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT),
@@ -240,8 +271,8 @@
/* DIV6 clocks */
CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
- CLKDEV_CON_ID("fsia_clk", &div6_clks[DIV6_FA]),
- CLKDEV_CON_ID("fsib_clk", &div6_clks[DIV6_FB]),
+ CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FA]),
+ CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FB]),
CLKDEV_CON_ID("irda_clk", &div6_clks[DIV6_I]),
CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_S]),
@@ -376,6 +407,9 @@
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
if (!ret)
+ ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_REPARENT_NR);
+
+ if (!ret)
ret = sh_hwblk_clk_register(mstp_clks, HWBLK_NR);
return ret;
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 2cfae81..92eb986 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -114,7 +114,7 @@
struct address_space *mapping = page_mapping(page);
if (mapping && !mapping_mapped(mapping))
- set_bit(PG_dcache_dirty, &page->flags);
+ clear_bit(PG_dcache_clean, &page->flags);
else
#endif
flush_cache_one(CACHE_OC_ADDRESS_ARRAY |
@@ -239,7 +239,7 @@
* another ASID than the current one.
*/
map_coherent = (current_cpu_data.dcache.n_aliases &&
- !test_bit(PG_dcache_dirty, &page->flags) &&
+ test_bit(PG_dcache_clean, &page->flags) &&
page_mapped(page));
if (map_coherent)
vaddr = kmap_coherent(page, address);
diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c
index f498da1..7729cca 100644
--- a/arch/sh/mm/cache-sh7705.c
+++ b/arch/sh/mm/cache-sh7705.c
@@ -139,7 +139,7 @@
struct address_space *mapping = page_mapping(page);
if (mapping && !mapping_mapped(mapping))
- set_bit(PG_dcache_dirty, &page->flags);
+ clear_bit(PG_dcache_clean, &page->flags);
else
__flush_dcache_page(__pa(page_address(page)));
}
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index ba401d1..88d3dc3 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -60,14 +60,14 @@
unsigned long len)
{
if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
- !test_bit(PG_dcache_dirty, &page->flags)) {
+ test_bit(PG_dcache_clean, &page->flags)) {
void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(vto, src, len);
kunmap_coherent(vto);
} else {
memcpy(dst, src, len);
if (boot_cpu_data.dcache.n_aliases)
- set_bit(PG_dcache_dirty, &page->flags);
+ clear_bit(PG_dcache_clean, &page->flags);
}
if (vma->vm_flags & VM_EXEC)
@@ -79,14 +79,14 @@
unsigned long len)
{
if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
- !test_bit(PG_dcache_dirty, &page->flags)) {
+ test_bit(PG_dcache_clean, &page->flags)) {
void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(dst, vfrom, len);
kunmap_coherent(vfrom);
} else {
memcpy(dst, src, len);
if (boot_cpu_data.dcache.n_aliases)
- set_bit(PG_dcache_dirty, &page->flags);
+ clear_bit(PG_dcache_clean, &page->flags);
}
}
@@ -98,7 +98,7 @@
vto = kmap_atomic(to, KM_USER1);
if (boot_cpu_data.dcache.n_aliases && page_mapped(from) &&
- !test_bit(PG_dcache_dirty, &from->flags)) {
+ test_bit(PG_dcache_clean, &from->flags)) {
vfrom = kmap_coherent(from, vaddr);
copy_page(vto, vfrom);
kunmap_coherent(vfrom);
@@ -141,7 +141,7 @@
page = pfn_to_page(pfn);
if (pfn_valid(pfn)) {
- int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
+ int dirty = !test_and_set_bit(PG_dcache_clean, &page->flags);
if (dirty)
__flush_purge_region(page_address(page), PAGE_SIZE);
}
@@ -153,7 +153,7 @@
if (pages_do_alias(addr, vmaddr)) {
if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
- !test_bit(PG_dcache_dirty, &page->flags)) {
+ test_bit(PG_dcache_clean, &page->flags)) {
void *kaddr;
kaddr = kmap_coherent(page, vmaddr);
diff --git a/arch/sh/mm/kmap.c b/arch/sh/mm/kmap.c
index 15d74ea42..ec29e14 100644
--- a/arch/sh/mm/kmap.c
+++ b/arch/sh/mm/kmap.c
@@ -34,7 +34,7 @@
enum fixed_addresses idx;
unsigned long vaddr;
- BUG_ON(test_bit(PG_dcache_dirty, &page->flags));
+ BUG_ON(!test_bit(PG_dcache_clean, &page->flags));
pagefault_disable();
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 02c710b..44dcad4 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1021,10 +1021,6 @@
{
struct sched_shutdown r = { .reason = reason };
-#ifdef CONFIG_SMP
- stop_other_cpus();
-#endif
-
if (HYPERVISOR_sched_op(SCHEDOP_shutdown, &r))
BUG();
}
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index a1feff9..44924e5 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -2415,8 +2415,6 @@
x86_init.paging.pagetable_setup_done = xen_pagetable_setup_done;
pv_mmu_ops = xen_mmu_ops;
- vmap_lazy_unmap = false;
-
memset(dummy_mapping, 0xff, PAGE_SIZE);
}
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 01afd8a..b5a7f92 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -181,24 +181,21 @@
for (i = 0; i < memmap.nr_entries; i++) {
unsigned long long end = map[i].addr + map[i].size;
- if (map[i].type == E820_RAM) {
- if (map[i].addr < mem_end && end > mem_end) {
- /* Truncate region to max_mem. */
- u64 delta = end - mem_end;
+ if (map[i].type == E820_RAM && end > mem_end) {
+ /* RAM off the end - may be partially included */
+ u64 delta = min(map[i].size, end - mem_end);
- map[i].size -= delta;
- extra_pages += PFN_DOWN(delta);
+ map[i].size -= delta;
+ end -= delta;
- end = mem_end;
- }
+ extra_pages += PFN_DOWN(delta);
}
- if (end > xen_extra_mem_start)
+ if (map[i].size > 0 && end > xen_extra_mem_start)
xen_extra_mem_start = end;
- /* If region is non-RAM or below mem_end, add what remains */
- if ((map[i].type != E820_RAM || map[i].addr < mem_end) &&
- map[i].size > 0)
+ /* Add region if any remains */
+ if (map[i].size > 0)
e820_add_region(map[i].addr, map[i].size, map[i].type);
}
@@ -252,20 +249,6 @@
return "Xen";
}
-static void xen_idle(void)
-{
- local_irq_disable();
-
- if (need_resched())
- local_irq_enable();
- else {
- current_thread_info()->status &= ~TS_POLLING;
- smp_mb__after_clear_bit();
- safe_halt();
- current_thread_info()->status |= TS_POLLING;
- }
-}
-
/*
* Set the bit indicating "nosegneg" library variants should be used.
* We only need to bother in pure 32-bit mode; compat 32-bit processes
@@ -362,7 +345,11 @@
MAX_GUEST_CMDLINE > COMMAND_LINE_SIZE ?
COMMAND_LINE_SIZE : MAX_GUEST_CMDLINE);
- pm_idle = xen_idle;
+ /* Set up idle, making sure it calls safe_halt() pvop */
+#ifdef CONFIG_X86_32
+ boot_cpu_data.hlt_works_ok = 1;
+#endif
+ pm_idle = default_idle;
fiddle_vdso();
}
diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
index 6ec9d53..008d4a0 100644
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -21,80 +21,9 @@
- Instructions for use
- --------------------
+ For usage instructions, please refer to:
- 1) Map a Linux block device to an existing rbd image.
-
- Usage: <mon ip addr> <options> <pool name> <rbd image name> [snap name]
-
- $ echo "192.168.0.1 name=admin rbd foo" > /sys/class/rbd/add
-
- The snapshot name can be "-" or omitted to map the image read/write.
-
- 2) List all active blkdev<->object mappings.
-
- In this example, we have performed step #1 twice, creating two blkdevs,
- mapped to two separate rados objects in the rados rbd pool
-
- $ cat /sys/class/rbd/list
- #id major client_name pool name snap KB
- 0 254 client4143 rbd foo - 1024000
-
- The columns, in order, are:
- - blkdev unique id
- - blkdev assigned major
- - rados client id
- - rados pool name
- - rados block device name
- - mapped snapshot ("-" if none)
- - device size in KB
-
-
- 3) Create a snapshot.
-
- Usage: <blkdev id> <snapname>
-
- $ echo "0 mysnap" > /sys/class/rbd/snap_create
-
-
- 4) Listing a snapshot.
-
- $ cat /sys/class/rbd/snaps_list
- #id snap KB
- 0 - 1024000 (*)
- 0 foo 1024000
-
- The columns, in order, are:
- - blkdev unique id
- - snapshot name, '-' means none (active read/write version)
- - size of device at time of snapshot
- - the (*) indicates this is the active version
-
- 5) Rollback to snapshot.
-
- Usage: <blkdev id> <snapname>
-
- $ echo "0 mysnap" > /sys/class/rbd/snap_rollback
-
-
- 6) Mapping an image using snapshot.
-
- A snapshot mapping is read-only. This is being done by passing
- snap=<snapname> to the options when adding a device.
-
- $ echo "192.168.0.1 name=admin,snap=mysnap rbd foo" > /sys/class/rbd/add
-
-
- 7) Remove an active blkdev<->rbd image mapping.
-
- In this example, we remove the mapping with blkdev unique id 1.
-
- $ echo 1 > /sys/class/rbd/remove
-
-
- NOTE: The actual creation and deletion of rados objects is outside the scope
- of this driver.
+ Documentation/ABI/testing/sysfs-bus-rbd
*/
@@ -163,6 +92,14 @@
u64 len;
};
+struct rbd_snap {
+ struct device dev;
+ const char *name;
+ size_t size;
+ struct list_head node;
+ u64 id;
+};
+
/*
* a single device
*/
@@ -193,21 +130,60 @@
int read_only;
struct list_head node;
+
+ /* list of snapshots */
+ struct list_head snaps;
+
+ /* sysfs related */
+ struct device dev;
+};
+
+static struct bus_type rbd_bus_type = {
+ .name = "rbd",
};
static spinlock_t node_lock; /* protects client get/put */
-static struct class *class_rbd; /* /sys/class/rbd */
static DEFINE_MUTEX(ctl_mutex); /* Serialize open/close/setup/teardown */
static LIST_HEAD(rbd_dev_list); /* devices */
static LIST_HEAD(rbd_client_list); /* clients */
+static int __rbd_init_snaps_header(struct rbd_device *rbd_dev);
+static void rbd_dev_release(struct device *dev);
+static ssize_t rbd_snap_rollback(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t size);
+static ssize_t rbd_snap_add(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count);
+static void __rbd_remove_snap_dev(struct rbd_device *rbd_dev,
+ struct rbd_snap *snap);;
+
+
+static struct rbd_device *dev_to_rbd(struct device *dev)
+{
+ return container_of(dev, struct rbd_device, dev);
+}
+
+static struct device *rbd_get_dev(struct rbd_device *rbd_dev)
+{
+ return get_device(&rbd_dev->dev);
+}
+
+static void rbd_put_dev(struct rbd_device *rbd_dev)
+{
+ put_device(&rbd_dev->dev);
+}
static int rbd_open(struct block_device *bdev, fmode_t mode)
{
struct gendisk *disk = bdev->bd_disk;
struct rbd_device *rbd_dev = disk->private_data;
+ rbd_get_dev(rbd_dev);
+
set_device_ro(bdev, rbd_dev->read_only);
if ((mode & FMODE_WRITE) && rbd_dev->read_only)
@@ -216,9 +192,19 @@
return 0;
}
+static int rbd_release(struct gendisk *disk, fmode_t mode)
+{
+ struct rbd_device *rbd_dev = disk->private_data;
+
+ rbd_put_dev(rbd_dev);
+
+ return 0;
+}
+
static const struct block_device_operations rbd_bd_ops = {
.owner = THIS_MODULE,
.open = rbd_open,
+ .release = rbd_release,
};
/*
@@ -361,7 +347,6 @@
int ret = -ENOMEM;
init_rwsem(&header->snap_rwsem);
-
header->snap_names_len = le64_to_cpu(ondisk->snap_names_len);
header->snapc = kmalloc(sizeof(struct ceph_snap_context) +
snap_count *
@@ -1256,10 +1241,20 @@
return -ERANGE;
}
+static void __rbd_remove_all_snaps(struct rbd_device *rbd_dev)
+{
+ struct rbd_snap *snap;
+
+ while (!list_empty(&rbd_dev->snaps)) {
+ snap = list_first_entry(&rbd_dev->snaps, struct rbd_snap, node);
+ __rbd_remove_snap_dev(rbd_dev, snap);
+ }
+}
+
/*
* only read the first part of the ondisk header, without the snaps info
*/
-static int rbd_update_snaps(struct rbd_device *rbd_dev)
+static int __rbd_update_snaps(struct rbd_device *rbd_dev)
{
int ret;
struct rbd_image_header h;
@@ -1280,12 +1275,15 @@
rbd_dev->header.total_snaps = h.total_snaps;
rbd_dev->header.snapc = h.snapc;
rbd_dev->header.snap_names = h.snap_names;
+ rbd_dev->header.snap_names_len = h.snap_names_len;
rbd_dev->header.snap_sizes = h.snap_sizes;
rbd_dev->header.snapc->seq = snap_seq;
+ ret = __rbd_init_snaps_header(rbd_dev);
+
up_write(&rbd_dev->header.snap_rwsem);
- return 0;
+ return ret;
}
static int rbd_init_disk(struct rbd_device *rbd_dev)
@@ -1300,6 +1298,11 @@
if (rc)
return rc;
+ /* no need to lock here, as rbd_dev is not registered yet */
+ rc = __rbd_init_snaps_header(rbd_dev);
+ if (rc)
+ return rc;
+
rc = rbd_header_set_snap(rbd_dev, rbd_dev->snap_name, &total_size);
if (rc)
return rc;
@@ -1343,54 +1346,360 @@
return rc;
}
-/********************************************************************
- * /sys/class/rbd/
- * add map rados objects to blkdev
- * remove unmap rados objects
- * list show mappings
- *******************************************************************/
+/*
+ sysfs
+*/
-static void class_rbd_release(struct class *cls)
+static ssize_t rbd_size_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
- kfree(cls);
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
+
+ return sprintf(buf, "%llu\n", (unsigned long long)rbd_dev->header.image_size);
}
-static ssize_t class_rbd_list(struct class *c,
- struct class_attribute *attr,
- char *data)
+static ssize_t rbd_major_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
- int n = 0;
- struct list_head *tmp;
- int max = PAGE_SIZE;
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
+
+ return sprintf(buf, "%d\n", rbd_dev->major);
+}
+
+static ssize_t rbd_client_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
+
+ return sprintf(buf, "client%lld\n", ceph_client_id(rbd_dev->client));
+}
+
+static ssize_t rbd_pool_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
+
+ return sprintf(buf, "%s\n", rbd_dev->pool_name);
+}
+
+static ssize_t rbd_name_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
+
+ return sprintf(buf, "%s\n", rbd_dev->obj);
+}
+
+static ssize_t rbd_snap_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
+
+ return sprintf(buf, "%s\n", rbd_dev->snap_name);
+}
+
+static ssize_t rbd_image_refresh(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t size)
+{
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
+ int rc;
+ int ret = size;
mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
- n += snprintf(data, max,
- "#id\tmajor\tclient_name\tpool\tname\tsnap\tKB\n");
+ rc = __rbd_update_snaps(rbd_dev);
+ if (rc < 0)
+ ret = rc;
- list_for_each(tmp, &rbd_dev_list) {
- struct rbd_device *rbd_dev;
+ mutex_unlock(&ctl_mutex);
+ return ret;
+}
- rbd_dev = list_entry(tmp, struct rbd_device, node);
- n += snprintf(data+n, max-n,
- "%d\t%d\tclient%lld\t%s\t%s\t%s\t%lld\n",
- rbd_dev->id,
- rbd_dev->major,
- ceph_client_id(rbd_dev->client),
- rbd_dev->pool_name,
- rbd_dev->obj, rbd_dev->snap_name,
- rbd_dev->header.image_size >> 10);
- if (n == max)
+static DEVICE_ATTR(size, S_IRUGO, rbd_size_show, NULL);
+static DEVICE_ATTR(major, S_IRUGO, rbd_major_show, NULL);
+static DEVICE_ATTR(client_id, S_IRUGO, rbd_client_id_show, NULL);
+static DEVICE_ATTR(pool, S_IRUGO, rbd_pool_show, NULL);
+static DEVICE_ATTR(name, S_IRUGO, rbd_name_show, NULL);
+static DEVICE_ATTR(refresh, S_IWUSR, NULL, rbd_image_refresh);
+static DEVICE_ATTR(current_snap, S_IRUGO, rbd_snap_show, NULL);
+static DEVICE_ATTR(create_snap, S_IWUSR, NULL, rbd_snap_add);
+static DEVICE_ATTR(rollback_snap, S_IWUSR, NULL, rbd_snap_rollback);
+
+static struct attribute *rbd_attrs[] = {
+ &dev_attr_size.attr,
+ &dev_attr_major.attr,
+ &dev_attr_client_id.attr,
+ &dev_attr_pool.attr,
+ &dev_attr_name.attr,
+ &dev_attr_current_snap.attr,
+ &dev_attr_refresh.attr,
+ &dev_attr_create_snap.attr,
+ &dev_attr_rollback_snap.attr,
+ NULL
+};
+
+static struct attribute_group rbd_attr_group = {
+ .attrs = rbd_attrs,
+};
+
+static const struct attribute_group *rbd_attr_groups[] = {
+ &rbd_attr_group,
+ NULL
+};
+
+static void rbd_sysfs_dev_release(struct device *dev)
+{
+}
+
+static struct device_type rbd_device_type = {
+ .name = "rbd",
+ .groups = rbd_attr_groups,
+ .release = rbd_sysfs_dev_release,
+};
+
+
+/*
+ sysfs - snapshots
+*/
+
+static ssize_t rbd_snap_size_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct rbd_snap *snap = container_of(dev, struct rbd_snap, dev);
+
+ return sprintf(buf, "%lld\n", (long long)snap->size);
+}
+
+static ssize_t rbd_snap_id_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct rbd_snap *snap = container_of(dev, struct rbd_snap, dev);
+
+ return sprintf(buf, "%lld\n", (long long)snap->id);
+}
+
+static DEVICE_ATTR(snap_size, S_IRUGO, rbd_snap_size_show, NULL);
+static DEVICE_ATTR(snap_id, S_IRUGO, rbd_snap_id_show, NULL);
+
+static struct attribute *rbd_snap_attrs[] = {
+ &dev_attr_snap_size.attr,
+ &dev_attr_snap_id.attr,
+ NULL,
+};
+
+static struct attribute_group rbd_snap_attr_group = {
+ .attrs = rbd_snap_attrs,
+};
+
+static void rbd_snap_dev_release(struct device *dev)
+{
+ struct rbd_snap *snap = container_of(dev, struct rbd_snap, dev);
+ kfree(snap->name);
+ kfree(snap);
+}
+
+static const struct attribute_group *rbd_snap_attr_groups[] = {
+ &rbd_snap_attr_group,
+ NULL
+};
+
+static struct device_type rbd_snap_device_type = {
+ .groups = rbd_snap_attr_groups,
+ .release = rbd_snap_dev_release,
+};
+
+static void __rbd_remove_snap_dev(struct rbd_device *rbd_dev,
+ struct rbd_snap *snap)
+{
+ list_del(&snap->node);
+ device_unregister(&snap->dev);
+}
+
+static int rbd_register_snap_dev(struct rbd_device *rbd_dev,
+ struct rbd_snap *snap,
+ struct device *parent)
+{
+ struct device *dev = &snap->dev;
+ int ret;
+
+ dev->type = &rbd_snap_device_type;
+ dev->parent = parent;
+ dev->release = rbd_snap_dev_release;
+ dev_set_name(dev, "snap_%s", snap->name);
+ ret = device_register(dev);
+
+ return ret;
+}
+
+static int __rbd_add_snap_dev(struct rbd_device *rbd_dev,
+ int i, const char *name,
+ struct rbd_snap **snapp)
+{
+ int ret;
+ struct rbd_snap *snap = kzalloc(sizeof(*snap), GFP_KERNEL);
+ if (!snap)
+ return -ENOMEM;
+ snap->name = kstrdup(name, GFP_KERNEL);
+ snap->size = rbd_dev->header.snap_sizes[i];
+ snap->id = rbd_dev->header.snapc->snaps[i];
+ if (device_is_registered(&rbd_dev->dev)) {
+ ret = rbd_register_snap_dev(rbd_dev, snap,
+ &rbd_dev->dev);
+ if (ret < 0)
+ goto err;
+ }
+ *snapp = snap;
+ return 0;
+err:
+ kfree(snap->name);
+ kfree(snap);
+ return ret;
+}
+
+/*
+ * search for the previous snap in a null delimited string list
+ */
+const char *rbd_prev_snap_name(const char *name, const char *start)
+{
+ if (name < start + 2)
+ return NULL;
+
+ name -= 2;
+ while (*name) {
+ if (name == start)
+ return start;
+ name--;
+ }
+ return name + 1;
+}
+
+/*
+ * compare the old list of snapshots that we have to what's in the header
+ * and update it accordingly. Note that the header holds the snapshots
+ * in a reverse order (from newest to oldest) and we need to go from
+ * older to new so that we don't get a duplicate snap name when
+ * doing the process (e.g., removed snapshot and recreated a new
+ * one with the same name.
+ */
+static int __rbd_init_snaps_header(struct rbd_device *rbd_dev)
+{
+ const char *name, *first_name;
+ int i = rbd_dev->header.total_snaps;
+ struct rbd_snap *snap, *old_snap = NULL;
+ int ret;
+ struct list_head *p, *n;
+
+ first_name = rbd_dev->header.snap_names;
+ name = first_name + rbd_dev->header.snap_names_len;
+
+ list_for_each_prev_safe(p, n, &rbd_dev->snaps) {
+ u64 cur_id;
+
+ old_snap = list_entry(p, struct rbd_snap, node);
+
+ if (i)
+ cur_id = rbd_dev->header.snapc->snaps[i - 1];
+
+ if (!i || old_snap->id < cur_id) {
+ /* old_snap->id was skipped, thus was removed */
+ __rbd_remove_snap_dev(rbd_dev, old_snap);
+ continue;
+ }
+ if (old_snap->id == cur_id) {
+ /* we have this snapshot already */
+ i--;
+ name = rbd_prev_snap_name(name, first_name);
+ continue;
+ }
+ for (; i > 0;
+ i--, name = rbd_prev_snap_name(name, first_name)) {
+ if (!name) {
+ WARN_ON(1);
+ return -EINVAL;
+ }
+ cur_id = rbd_dev->header.snapc->snaps[i];
+ /* snapshot removal? handle it above */
+ if (cur_id >= old_snap->id)
+ break;
+ /* a new snapshot */
+ ret = __rbd_add_snap_dev(rbd_dev, i - 1, name, &snap);
+ if (ret < 0)
+ return ret;
+
+ /* note that we add it backward so using n and not p */
+ list_add(&snap->node, n);
+ p = &snap->node;
+ }
+ }
+ /* we're done going over the old snap list, just add what's left */
+ for (; i > 0; i--) {
+ name = rbd_prev_snap_name(name, first_name);
+ if (!name) {
+ WARN_ON(1);
+ return -EINVAL;
+ }
+ ret = __rbd_add_snap_dev(rbd_dev, i - 1, name, &snap);
+ if (ret < 0)
+ return ret;
+ list_add(&snap->node, &rbd_dev->snaps);
+ }
+
+ return 0;
+}
+
+
+static void rbd_root_dev_release(struct device *dev)
+{
+}
+
+static struct device rbd_root_dev = {
+ .init_name = "rbd",
+ .release = rbd_root_dev_release,
+};
+
+static int rbd_bus_add_dev(struct rbd_device *rbd_dev)
+{
+ int ret = -ENOMEM;
+ struct device *dev;
+ struct rbd_snap *snap;
+
+ mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+ dev = &rbd_dev->dev;
+
+ dev->bus = &rbd_bus_type;
+ dev->type = &rbd_device_type;
+ dev->parent = &rbd_root_dev;
+ dev->release = rbd_dev_release;
+ dev_set_name(dev, "%d", rbd_dev->id);
+ ret = device_register(dev);
+ if (ret < 0)
+ goto done_free;
+
+ list_for_each_entry(snap, &rbd_dev->snaps, node) {
+ ret = rbd_register_snap_dev(rbd_dev, snap,
+ &rbd_dev->dev);
+ if (ret < 0)
break;
}
mutex_unlock(&ctl_mutex);
- return n;
+ return 0;
+done_free:
+ mutex_unlock(&ctl_mutex);
+ return ret;
}
-static ssize_t class_rbd_add(struct class *c,
- struct class_attribute *attr,
- const char *buf, size_t count)
+static void rbd_bus_del_dev(struct rbd_device *rbd_dev)
+{
+ device_unregister(&rbd_dev->dev);
+}
+
+static ssize_t rbd_add(struct bus_type *bus, const char *buf, size_t count)
{
struct ceph_osd_client *osdc;
struct rbd_device *rbd_dev;
@@ -1419,6 +1728,7 @@
/* static rbd_device initialization */
spin_lock_init(&rbd_dev->lock);
INIT_LIST_HEAD(&rbd_dev->node);
+ INIT_LIST_HEAD(&rbd_dev->snaps);
/* generate unique id: find highest unique id, add one */
mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
@@ -1478,6 +1788,9 @@
}
rbd_dev->major = irc;
+ rc = rbd_bus_add_dev(rbd_dev);
+ if (rc)
+ goto err_out_disk;
/* set up and announce blkdev mapping */
rc = rbd_init_disk(rbd_dev);
if (rc)
@@ -1487,6 +1800,8 @@
err_out_blkdev:
unregister_blkdev(rbd_dev->major, rbd_dev->name);
+err_out_disk:
+ rbd_free_disk(rbd_dev);
err_out_client:
rbd_put_client(rbd_dev);
mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
@@ -1518,35 +1833,10 @@
return NULL;
}
-static ssize_t class_rbd_remove(struct class *c,
- struct class_attribute *attr,
- const char *buf,
- size_t count)
+static void rbd_dev_release(struct device *dev)
{
- struct rbd_device *rbd_dev = NULL;
- int target_id, rc;
- unsigned long ul;
-
- rc = strict_strtoul(buf, 10, &ul);
- if (rc)
- return rc;
-
- /* convert to int; abort if we lost anything in the conversion */
- target_id = (int) ul;
- if (target_id != ul)
- return -EINVAL;
-
- /* remove object from list immediately */
- mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
-
- rbd_dev = __rbd_get_dev(target_id);
- if (rbd_dev)
- list_del_init(&rbd_dev->node);
-
- mutex_unlock(&ctl_mutex);
-
- if (!rbd_dev)
- return -ENOENT;
+ struct rbd_device *rbd_dev =
+ container_of(dev, struct rbd_device, dev);
rbd_put_client(rbd_dev);
@@ -1557,67 +1847,11 @@
/* release module ref */
module_put(THIS_MODULE);
-
- return count;
}
-static ssize_t class_rbd_snaps_list(struct class *c,
- struct class_attribute *attr,
- char *data)
-{
- struct rbd_device *rbd_dev = NULL;
- struct list_head *tmp;
- struct rbd_image_header *header;
- int i, n = 0, max = PAGE_SIZE;
- int ret;
-
- mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
-
- n += snprintf(data, max, "#id\tsnap\tKB\n");
-
- list_for_each(tmp, &rbd_dev_list) {
- char *names, *p;
- struct ceph_snap_context *snapc;
-
- rbd_dev = list_entry(tmp, struct rbd_device, node);
- header = &rbd_dev->header;
-
- down_read(&header->snap_rwsem);
-
- names = header->snap_names;
- snapc = header->snapc;
-
- n += snprintf(data + n, max - n, "%d\t%s\t%lld%s\n",
- rbd_dev->id, RBD_SNAP_HEAD_NAME,
- header->image_size >> 10,
- (!rbd_dev->cur_snap ? " (*)" : ""));
- if (n == max)
- break;
-
- p = names;
- for (i = 0; i < header->total_snaps; i++, p += strlen(p) + 1) {
- n += snprintf(data + n, max - n, "%d\t%s\t%lld%s\n",
- rbd_dev->id, p, header->snap_sizes[i] >> 10,
- (rbd_dev->cur_snap &&
- (snap_index(header, i) == rbd_dev->cur_snap) ?
- " (*)" : ""));
- if (n == max)
- break;
- }
-
- up_read(&header->snap_rwsem);
- }
-
-
- ret = n;
- mutex_unlock(&ctl_mutex);
- return ret;
-}
-
-static ssize_t class_rbd_snaps_refresh(struct class *c,
- struct class_attribute *attr,
- const char *buf,
- size_t count)
+static ssize_t rbd_remove(struct bus_type *bus,
+ const char *buf,
+ size_t count)
{
struct rbd_device *rbd_dev = NULL;
int target_id, rc;
@@ -1641,94 +1875,69 @@
goto done;
}
- rc = rbd_update_snaps(rbd_dev);
- if (rc < 0)
- ret = rc;
+ list_del_init(&rbd_dev->node);
+
+ __rbd_remove_all_snaps(rbd_dev);
+ rbd_bus_del_dev(rbd_dev);
done:
mutex_unlock(&ctl_mutex);
return ret;
}
-static ssize_t class_rbd_snap_create(struct class *c,
- struct class_attribute *attr,
- const char *buf,
- size_t count)
+static ssize_t rbd_snap_add(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
{
- struct rbd_device *rbd_dev = NULL;
- int target_id, ret;
- char *name;
-
- name = kmalloc(RBD_MAX_SNAP_NAME_LEN + 1, GFP_KERNEL);
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
+ int ret;
+ char *name = kmalloc(count + 1, GFP_KERNEL);
if (!name)
return -ENOMEM;
- /* parse snaps add command */
- if (sscanf(buf, "%d "
- "%" __stringify(RBD_MAX_SNAP_NAME_LEN) "s",
- &target_id,
- name) != 2) {
- ret = -EINVAL;
- goto done;
- }
+ snprintf(name, count, "%s", buf);
mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
- rbd_dev = __rbd_get_dev(target_id);
- if (!rbd_dev) {
- ret = -ENOENT;
- goto done_unlock;
- }
-
ret = rbd_header_add_snap(rbd_dev,
name, GFP_KERNEL);
if (ret < 0)
goto done_unlock;
- ret = rbd_update_snaps(rbd_dev);
+ ret = __rbd_update_snaps(rbd_dev);
if (ret < 0)
goto done_unlock;
ret = count;
done_unlock:
mutex_unlock(&ctl_mutex);
-done:
kfree(name);
return ret;
}
-static ssize_t class_rbd_rollback(struct class *c,
- struct class_attribute *attr,
- const char *buf,
- size_t count)
+static ssize_t rbd_snap_rollback(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
{
- struct rbd_device *rbd_dev = NULL;
- int target_id, ret;
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
+ int ret;
u64 snapid;
- char snap_name[RBD_MAX_SNAP_NAME_LEN];
u64 cur_ofs;
- char *seg_name;
-
- /* parse snaps add command */
- if (sscanf(buf, "%d "
- "%" __stringify(RBD_MAX_SNAP_NAME_LEN) "s",
- &target_id,
- snap_name) != 2) {
- return -EINVAL;
- }
-
+ char *seg_name = NULL;
+ char *snap_name = kmalloc(count + 1, GFP_KERNEL);
ret = -ENOMEM;
- seg_name = kmalloc(RBD_MAX_SEG_NAME_LEN + 1, GFP_NOIO);
- if (!seg_name)
+ if (!snap_name)
return ret;
- mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+ /* parse snaps add command */
+ snprintf(snap_name, count, "%s", buf);
+ seg_name = kmalloc(RBD_MAX_SEG_NAME_LEN + 1, GFP_NOIO);
+ if (!seg_name)
+ goto done;
- rbd_dev = __rbd_get_dev(target_id);
- if (!rbd_dev) {
- ret = -ENOENT;
- goto done_unlock;
- }
+ mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
ret = snap_by_name(&rbd_dev->header, snap_name, &snapid, NULL);
if (ret < 0)
@@ -1750,7 +1959,7 @@
seg_name, ret);
}
- ret = rbd_update_snaps(rbd_dev);
+ ret = __rbd_update_snaps(rbd_dev);
if (ret < 0)
goto done_unlock;
@@ -1758,57 +1967,42 @@
done_unlock:
mutex_unlock(&ctl_mutex);
+done:
kfree(seg_name);
+ kfree(snap_name);
return ret;
}
-static struct class_attribute class_rbd_attrs[] = {
- __ATTR(add, 0200, NULL, class_rbd_add),
- __ATTR(remove, 0200, NULL, class_rbd_remove),
- __ATTR(list, 0444, class_rbd_list, NULL),
- __ATTR(snaps_refresh, 0200, NULL, class_rbd_snaps_refresh),
- __ATTR(snap_create, 0200, NULL, class_rbd_snap_create),
- __ATTR(snaps_list, 0444, class_rbd_snaps_list, NULL),
- __ATTR(snap_rollback, 0200, NULL, class_rbd_rollback),
+static struct bus_attribute rbd_bus_attrs[] = {
+ __ATTR(add, S_IWUSR, NULL, rbd_add),
+ __ATTR(remove, S_IWUSR, NULL, rbd_remove),
__ATTR_NULL
};
/*
* create control files in sysfs
- * /sys/class/rbd/...
+ * /sys/bus/rbd/...
*/
static int rbd_sysfs_init(void)
{
- int ret = -ENOMEM;
+ int ret;
- class_rbd = kzalloc(sizeof(*class_rbd), GFP_KERNEL);
- if (!class_rbd)
- goto out;
+ rbd_bus_type.bus_attrs = rbd_bus_attrs;
- class_rbd->name = DRV_NAME;
- class_rbd->owner = THIS_MODULE;
- class_rbd->class_release = class_rbd_release;
- class_rbd->class_attrs = class_rbd_attrs;
+ ret = bus_register(&rbd_bus_type);
+ if (ret < 0)
+ return ret;
- ret = class_register(class_rbd);
- if (ret)
- goto out_class;
- return 0;
+ ret = device_register(&rbd_root_dev);
-out_class:
- kfree(class_rbd);
- class_rbd = NULL;
- pr_err(DRV_NAME ": failed to create class rbd\n");
-out:
return ret;
}
static void rbd_sysfs_cleanup(void)
{
- if (class_rbd)
- class_destroy(class_rbd);
- class_rbd = NULL;
+ device_unregister(&rbd_root_dev);
+ bus_unregister(&rbd_bus_type);
}
int __init rbd_init(void)
diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c
index eb6b54d..85ffd5e 100644
--- a/drivers/dma/shdma.c
+++ b/drivers/dma/shdma.c
@@ -1213,3 +1213,4 @@
MODULE_AUTHOR("Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>");
MODULE_DESCRIPTION("Renesas SH DMA Engine driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:sh-dma-engine");
diff --git a/drivers/gpio/cs5535-gpio.c b/drivers/gpio/cs5535-gpio.c
index e23c068..599f6c9 100644
--- a/drivers/gpio/cs5535-gpio.c
+++ b/drivers/gpio/cs5535-gpio.c
@@ -56,6 +56,18 @@
* registers, see include/linux/cs5535.h.
*/
+static void errata_outl(u32 val, unsigned long addr)
+{
+ /*
+ * According to the CS5536 errata (#36), after suspend
+ * a write to the high bank GPIO register will clear all
+ * non-selected bits; the recommended workaround is a
+ * read-modify-write operation.
+ */
+ val |= inl(addr);
+ outl(val, addr);
+}
+
static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset,
unsigned int reg)
{
@@ -64,7 +76,7 @@
outl(1 << offset, chip->base + reg);
else
/* high bank register */
- outl(1 << (offset - 16), chip->base + 0x80 + reg);
+ errata_outl(1 << (offset - 16), chip->base + 0x80 + reg);
}
void cs5535_gpio_set(unsigned offset, unsigned int reg)
@@ -86,7 +98,7 @@
outl(1 << (offset + 16), chip->base + reg);
else
/* high bank register */
- outl(1 << offset, chip->base + 0x80 + reg);
+ errata_outl(1 << offset, chip->base + 0x80 + reg);
}
void cs5535_gpio_clear(unsigned offset, unsigned int reg)
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index f7af91cb..7ca59359 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -471,6 +471,7 @@
int count = 0, ro, fail = 0;
struct drm_crtc_helper_funcs *crtc_funcs;
int ret = 0;
+ int i;
DRM_DEBUG_KMS("\n");
@@ -666,6 +667,12 @@
if (ret != 0)
goto fail;
}
+ DRM_DEBUG_KMS("Setting connector DPMS state to on\n");
+ for (i = 0; i < set->num_connectors; i++) {
+ DRM_DEBUG_KMS("\t[CONNECTOR:%d:%s] set DPMS on\n", set->connectors[i]->base.id,
+ drm_get_connector_name(set->connectors[i]));
+ set->connectors[i]->dpms = DRM_MODE_DPMS_ON;
+ }
kfree(save_connectors);
kfree(save_encoders);
@@ -841,7 +848,7 @@
struct delayed_work *delayed_work = to_delayed_work(work);
struct drm_device *dev = container_of(delayed_work, struct drm_device, mode_config.output_poll_work);
struct drm_connector *connector;
- enum drm_connector_status old_status, status;
+ enum drm_connector_status old_status;
bool repoll = false, changed = false;
if (!drm_kms_helper_poll)
@@ -866,8 +873,9 @@
!(connector->polled & DRM_CONNECTOR_POLL_HPD))
continue;
- status = connector->funcs->detect(connector, false);
- if (old_status != status)
+ connector->status = connector->funcs->detect(connector, false);
+ DRM_DEBUG_KMS("connector status updated to %d\n", connector->status);
+ if (old_status != connector->status)
changed = true;
}
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 17b1cba..5e54821 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -38,8 +38,7 @@
static uint32_t i915_gem_get_gtt_alignment(struct drm_gem_object *obj);
-static int i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj,
- bool pipelined);
+static int i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj);
static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj);
static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj);
static int i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj,
@@ -2594,7 +2593,7 @@
if (reg->gpu) {
int ret;
- ret = i915_gem_object_flush_gpu_write_domain(obj, true);
+ ret = i915_gem_object_flush_gpu_write_domain(obj);
if (ret)
return ret;
@@ -2742,8 +2741,7 @@
/** Flushes any GPU write domain for the object if it's dirty. */
static int
-i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj,
- bool pipelined)
+i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj)
{
struct drm_device *dev = obj->dev;
uint32_t old_write_domain;
@@ -2762,10 +2760,7 @@
obj->read_domains,
old_write_domain);
- if (pipelined)
- return 0;
-
- return i915_gem_object_wait_rendering(obj, true);
+ return 0;
}
/** Flushes the GTT write domain for the object if it's dirty. */
@@ -2826,18 +2821,15 @@
if (obj_priv->gtt_space == NULL)
return -EINVAL;
- ret = i915_gem_object_flush_gpu_write_domain(obj, false);
+ ret = i915_gem_object_flush_gpu_write_domain(obj);
if (ret != 0)
return ret;
+ ret = i915_gem_object_wait_rendering(obj, true);
+ if (ret)
+ return ret;
i915_gem_object_flush_cpu_write_domain(obj);
- if (write) {
- ret = i915_gem_object_wait_rendering(obj, true);
- if (ret)
- return ret;
- }
-
old_write_domain = obj->write_domain;
old_read_domains = obj->read_domains;
@@ -2875,7 +2867,7 @@
if (obj_priv->gtt_space == NULL)
return -EINVAL;
- ret = i915_gem_object_flush_gpu_write_domain(obj, true);
+ ret = i915_gem_object_flush_gpu_write_domain(obj);
if (ret)
return ret;
@@ -2924,9 +2916,12 @@
uint32_t old_write_domain, old_read_domains;
int ret;
- ret = i915_gem_object_flush_gpu_write_domain(obj, false);
+ ret = i915_gem_object_flush_gpu_write_domain(obj);
if (ret != 0)
return ret;
+ ret = i915_gem_object_wait_rendering(obj, true);
+ if (ret)
+ return ret;
i915_gem_object_flush_gtt_write_domain(obj);
@@ -2935,12 +2930,6 @@
*/
i915_gem_object_set_to_full_cpu_read_domain(obj);
- if (write) {
- ret = i915_gem_object_wait_rendering(obj, true);
- if (ret)
- return ret;
- }
-
old_write_domain = obj->write_domain;
old_read_domains = obj->read_domains;
@@ -3205,9 +3194,13 @@
if (offset == 0 && size == obj->size)
return i915_gem_object_set_to_cpu_domain(obj, 0);
- ret = i915_gem_object_flush_gpu_write_domain(obj, false);
+ ret = i915_gem_object_flush_gpu_write_domain(obj);
if (ret != 0)
return ret;
+ ret = i915_gem_object_wait_rendering(obj, true);
+ if (ret)
+ return ret;
+
i915_gem_object_flush_gtt_write_domain(obj);
/* If we're already fully in the CPU read domain, we're done. */
@@ -3254,192 +3247,230 @@
return 0;
}
-/**
- * Pin an object to the GTT and evaluate the relocations landing in it.
- */
static int
-i915_gem_execbuffer_relocate(struct drm_i915_gem_object *obj,
- struct drm_file *file_priv,
- struct drm_i915_gem_exec_object2 *entry)
+i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj,
+ struct drm_file *file_priv,
+ struct drm_i915_gem_exec_object2 *entry,
+ struct drm_i915_gem_relocation_entry *reloc)
{
struct drm_device *dev = obj->base.dev;
- drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_i915_gem_relocation_entry __user *user_relocs;
- struct drm_gem_object *target_obj = NULL;
- uint32_t target_handle = 0;
- int i, ret = 0;
+ struct drm_gem_object *target_obj;
+ uint32_t target_offset;
+ int ret = -EINVAL;
- user_relocs = (void __user *)(uintptr_t)entry->relocs_ptr;
- for (i = 0; i < entry->relocation_count; i++) {
- struct drm_i915_gem_relocation_entry reloc;
- uint32_t target_offset;
+ target_obj = drm_gem_object_lookup(dev, file_priv,
+ reloc->target_handle);
+ if (target_obj == NULL)
+ return -ENOENT;
- if (__copy_from_user_inatomic(&reloc,
- user_relocs+i,
- sizeof(reloc))) {
- ret = -EFAULT;
- break;
- }
-
- if (reloc.target_handle != target_handle) {
- drm_gem_object_unreference(target_obj);
-
- target_obj = drm_gem_object_lookup(dev, file_priv,
- reloc.target_handle);
- if (target_obj == NULL) {
- ret = -ENOENT;
- break;
- }
-
- target_handle = reloc.target_handle;
- }
- target_offset = to_intel_bo(target_obj)->gtt_offset;
+ target_offset = to_intel_bo(target_obj)->gtt_offset;
#if WATCH_RELOC
- DRM_INFO("%s: obj %p offset %08x target %d "
- "read %08x write %08x gtt %08x "
- "presumed %08x delta %08x\n",
- __func__,
- obj,
- (int) reloc.offset,
- (int) reloc.target_handle,
- (int) reloc.read_domains,
- (int) reloc.write_domain,
- (int) target_offset,
- (int) reloc.presumed_offset,
- reloc.delta);
+ DRM_INFO("%s: obj %p offset %08x target %d "
+ "read %08x write %08x gtt %08x "
+ "presumed %08x delta %08x\n",
+ __func__,
+ obj,
+ (int) reloc->offset,
+ (int) reloc->target_handle,
+ (int) reloc->read_domains,
+ (int) reloc->write_domain,
+ (int) target_offset,
+ (int) reloc->presumed_offset,
+ reloc->delta);
#endif
- /* The target buffer should have appeared before us in the
- * exec_object list, so it should have a GTT space bound by now.
- */
- if (target_offset == 0) {
- DRM_ERROR("No GTT space found for object %d\n",
- reloc.target_handle);
- ret = -EINVAL;
- break;
- }
-
- /* Validate that the target is in a valid r/w GPU domain */
- if (reloc.write_domain & (reloc.write_domain - 1)) {
- DRM_ERROR("reloc with multiple write domains: "
- "obj %p target %d offset %d "
- "read %08x write %08x",
- obj, reloc.target_handle,
- (int) reloc.offset,
- reloc.read_domains,
- reloc.write_domain);
- ret = -EINVAL;
- break;
- }
- if (reloc.write_domain & I915_GEM_DOMAIN_CPU ||
- reloc.read_domains & I915_GEM_DOMAIN_CPU) {
- DRM_ERROR("reloc with read/write CPU domains: "
- "obj %p target %d offset %d "
- "read %08x write %08x",
- obj, reloc.target_handle,
- (int) reloc.offset,
- reloc.read_domains,
- reloc.write_domain);
- ret = -EINVAL;
- break;
- }
- if (reloc.write_domain && target_obj->pending_write_domain &&
- reloc.write_domain != target_obj->pending_write_domain) {
- DRM_ERROR("Write domain conflict: "
- "obj %p target %d offset %d "
- "new %08x old %08x\n",
- obj, reloc.target_handle,
- (int) reloc.offset,
- reloc.write_domain,
- target_obj->pending_write_domain);
- ret = -EINVAL;
- break;
- }
-
- target_obj->pending_read_domains |= reloc.read_domains;
- target_obj->pending_write_domain |= reloc.write_domain;
-
- /* If the relocation already has the right value in it, no
- * more work needs to be done.
- */
- if (target_offset == reloc.presumed_offset)
- continue;
-
- /* Check that the relocation address is valid... */
- if (reloc.offset > obj->base.size - 4) {
- DRM_ERROR("Relocation beyond object bounds: "
- "obj %p target %d offset %d size %d.\n",
- obj, reloc.target_handle,
- (int) reloc.offset, (int) obj->base.size);
- ret = -EINVAL;
- break;
- }
- if (reloc.offset & 3) {
- DRM_ERROR("Relocation not 4-byte aligned: "
- "obj %p target %d offset %d.\n",
- obj, reloc.target_handle,
- (int) reloc.offset);
- ret = -EINVAL;
- break;
- }
-
- /* and points to somewhere within the target object. */
- if (reloc.delta >= target_obj->size) {
- DRM_ERROR("Relocation beyond target object bounds: "
- "obj %p target %d delta %d size %d.\n",
- obj, reloc.target_handle,
- (int) reloc.delta, (int) target_obj->size);
- ret = -EINVAL;
- break;
- }
-
- reloc.delta += target_offset;
- if (obj->base.write_domain == I915_GEM_DOMAIN_CPU) {
- uint32_t page_offset = reloc.offset & ~PAGE_MASK;
- char *vaddr;
-
- vaddr = kmap_atomic(obj->pages[reloc.offset >> PAGE_SHIFT]);
- *(uint32_t *)(vaddr + page_offset) = reloc.delta;
- kunmap_atomic(vaddr);
- } else {
- uint32_t __iomem *reloc_entry;
- void __iomem *reloc_page;
-
- ret = i915_gem_object_set_to_gtt_domain(&obj->base, 1);
- if (ret)
- break;
-
- /* Map the page containing the relocation we're going to perform. */
- reloc.offset += obj->gtt_offset;
- reloc_page = io_mapping_map_atomic_wc(dev_priv->mm.gtt_mapping,
- reloc.offset & PAGE_MASK);
- reloc_entry = (uint32_t __iomem *)
- (reloc_page + (reloc.offset & ~PAGE_MASK));
- iowrite32(reloc.delta, reloc_entry);
- io_mapping_unmap_atomic(reloc_page);
- }
-
- /* and update the user's relocation entry */
- reloc.presumed_offset = target_offset;
- if (__copy_to_user_inatomic(&user_relocs[i].presumed_offset,
- &reloc.presumed_offset,
- sizeof(reloc.presumed_offset))) {
- ret = -EFAULT;
- break;
- }
+ /* The target buffer should have appeared before us in the
+ * exec_object list, so it should have a GTT space bound by now.
+ */
+ if (target_offset == 0) {
+ DRM_ERROR("No GTT space found for object %d\n",
+ reloc->target_handle);
+ goto err;
}
+ /* Validate that the target is in a valid r/w GPU domain */
+ if (reloc->write_domain & (reloc->write_domain - 1)) {
+ DRM_ERROR("reloc with multiple write domains: "
+ "obj %p target %d offset %d "
+ "read %08x write %08x",
+ obj, reloc->target_handle,
+ (int) reloc->offset,
+ reloc->read_domains,
+ reloc->write_domain);
+ goto err;
+ }
+ if (reloc->write_domain & I915_GEM_DOMAIN_CPU ||
+ reloc->read_domains & I915_GEM_DOMAIN_CPU) {
+ DRM_ERROR("reloc with read/write CPU domains: "
+ "obj %p target %d offset %d "
+ "read %08x write %08x",
+ obj, reloc->target_handle,
+ (int) reloc->offset,
+ reloc->read_domains,
+ reloc->write_domain);
+ goto err;
+ }
+ if (reloc->write_domain && target_obj->pending_write_domain &&
+ reloc->write_domain != target_obj->pending_write_domain) {
+ DRM_ERROR("Write domain conflict: "
+ "obj %p target %d offset %d "
+ "new %08x old %08x\n",
+ obj, reloc->target_handle,
+ (int) reloc->offset,
+ reloc->write_domain,
+ target_obj->pending_write_domain);
+ goto err;
+ }
+
+ target_obj->pending_read_domains |= reloc->read_domains;
+ target_obj->pending_write_domain |= reloc->write_domain;
+
+ /* If the relocation already has the right value in it, no
+ * more work needs to be done.
+ */
+ if (target_offset == reloc->presumed_offset)
+ goto out;
+
+ /* Check that the relocation address is valid... */
+ if (reloc->offset > obj->base.size - 4) {
+ DRM_ERROR("Relocation beyond object bounds: "
+ "obj %p target %d offset %d size %d.\n",
+ obj, reloc->target_handle,
+ (int) reloc->offset,
+ (int) obj->base.size);
+ goto err;
+ }
+ if (reloc->offset & 3) {
+ DRM_ERROR("Relocation not 4-byte aligned: "
+ "obj %p target %d offset %d.\n",
+ obj, reloc->target_handle,
+ (int) reloc->offset);
+ goto err;
+ }
+
+ /* and points to somewhere within the target object. */
+ if (reloc->delta >= target_obj->size) {
+ DRM_ERROR("Relocation beyond target object bounds: "
+ "obj %p target %d delta %d size %d.\n",
+ obj, reloc->target_handle,
+ (int) reloc->delta,
+ (int) target_obj->size);
+ goto err;
+ }
+
+ reloc->delta += target_offset;
+ if (obj->base.write_domain == I915_GEM_DOMAIN_CPU) {
+ uint32_t page_offset = reloc->offset & ~PAGE_MASK;
+ char *vaddr;
+
+ vaddr = kmap_atomic(obj->pages[reloc->offset >> PAGE_SHIFT]);
+ *(uint32_t *)(vaddr + page_offset) = reloc->delta;
+ kunmap_atomic(vaddr);
+ } else {
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t __iomem *reloc_entry;
+ void __iomem *reloc_page;
+
+ ret = i915_gem_object_set_to_gtt_domain(&obj->base, 1);
+ if (ret)
+ goto err;
+
+ /* Map the page containing the relocation we're going to perform. */
+ reloc->offset += obj->gtt_offset;
+ reloc_page = io_mapping_map_atomic_wc(dev_priv->mm.gtt_mapping,
+ reloc->offset & PAGE_MASK);
+ reloc_entry = (uint32_t __iomem *)
+ (reloc_page + (reloc->offset & ~PAGE_MASK));
+ iowrite32(reloc->delta, reloc_entry);
+ io_mapping_unmap_atomic(reloc_page);
+ }
+
+ /* and update the user's relocation entry */
+ reloc->presumed_offset = target_offset;
+
+out:
+ ret = 0;
+err:
drm_gem_object_unreference(target_obj);
return ret;
}
static int
-i915_gem_execbuffer_pin(struct drm_device *dev,
- struct drm_file *file,
- struct drm_gem_object **object_list,
- struct drm_i915_gem_exec_object2 *exec_list,
- int count)
+i915_gem_execbuffer_relocate_object(struct drm_i915_gem_object *obj,
+ struct drm_file *file_priv,
+ struct drm_i915_gem_exec_object2 *entry)
+{
+ struct drm_i915_gem_relocation_entry __user *user_relocs;
+ int i, ret;
+
+ user_relocs = (void __user *)(uintptr_t)entry->relocs_ptr;
+ for (i = 0; i < entry->relocation_count; i++) {
+ struct drm_i915_gem_relocation_entry reloc;
+
+ if (__copy_from_user_inatomic(&reloc,
+ user_relocs+i,
+ sizeof(reloc)))
+ return -EFAULT;
+
+ ret = i915_gem_execbuffer_relocate_entry(obj, file_priv, entry, &reloc);
+ if (ret)
+ return ret;
+
+ if (__copy_to_user_inatomic(&user_relocs[i].presumed_offset,
+ &reloc.presumed_offset,
+ sizeof(reloc.presumed_offset)))
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int
+i915_gem_execbuffer_relocate_object_slow(struct drm_i915_gem_object *obj,
+ struct drm_file *file_priv,
+ struct drm_i915_gem_exec_object2 *entry,
+ struct drm_i915_gem_relocation_entry *relocs)
+{
+ int i, ret;
+
+ for (i = 0; i < entry->relocation_count; i++) {
+ ret = i915_gem_execbuffer_relocate_entry(obj, file_priv, entry, &relocs[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int
+i915_gem_execbuffer_relocate(struct drm_device *dev,
+ struct drm_file *file,
+ struct drm_gem_object **object_list,
+ struct drm_i915_gem_exec_object2 *exec_list,
+ int count)
+{
+ int i, ret;
+
+ for (i = 0; i < count; i++) {
+ struct drm_i915_gem_object *obj = to_intel_bo(object_list[i]);
+ obj->base.pending_read_domains = 0;
+ obj->base.pending_write_domain = 0;
+ ret = i915_gem_execbuffer_relocate_object(obj, file,
+ &exec_list[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int
+i915_gem_execbuffer_reserve(struct drm_device *dev,
+ struct drm_file *file,
+ struct drm_gem_object **object_list,
+ struct drm_i915_gem_exec_object2 *exec_list,
+ int count)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret, i, retry;
@@ -3502,6 +3533,87 @@
}
static int
+i915_gem_execbuffer_relocate_slow(struct drm_device *dev,
+ struct drm_file *file,
+ struct drm_gem_object **object_list,
+ struct drm_i915_gem_exec_object2 *exec_list,
+ int count)
+{
+ struct drm_i915_gem_relocation_entry *reloc;
+ int i, total, ret;
+
+ for (i = 0; i < count; i++) {
+ struct drm_i915_gem_object *obj = to_intel_bo(object_list[i]);
+ obj->in_execbuffer = false;
+ }
+
+ mutex_unlock(&dev->struct_mutex);
+
+ total = 0;
+ for (i = 0; i < count; i++)
+ total += exec_list[i].relocation_count;
+
+ reloc = drm_malloc_ab(total, sizeof(*reloc));
+ if (reloc == NULL) {
+ mutex_lock(&dev->struct_mutex);
+ return -ENOMEM;
+ }
+
+ total = 0;
+ for (i = 0; i < count; i++) {
+ struct drm_i915_gem_relocation_entry __user *user_relocs;
+
+ user_relocs = (void __user *)(uintptr_t)exec_list[i].relocs_ptr;
+
+ if (copy_from_user(reloc+total, user_relocs,
+ exec_list[i].relocation_count *
+ sizeof(*reloc))) {
+ ret = -EFAULT;
+ mutex_lock(&dev->struct_mutex);
+ goto err;
+ }
+
+ total += exec_list[i].relocation_count;
+ }
+
+ ret = i915_mutex_lock_interruptible(dev);
+ if (ret) {
+ mutex_lock(&dev->struct_mutex);
+ goto err;
+ }
+
+ ret = i915_gem_execbuffer_reserve(dev, file,
+ object_list, exec_list,
+ count);
+ if (ret)
+ goto err;
+
+ total = 0;
+ for (i = 0; i < count; i++) {
+ struct drm_i915_gem_object *obj = to_intel_bo(object_list[i]);
+ obj->base.pending_read_domains = 0;
+ obj->base.pending_write_domain = 0;
+ ret = i915_gem_execbuffer_relocate_object_slow(obj, file,
+ &exec_list[i],
+ reloc + total);
+ if (ret)
+ goto err;
+
+ total += exec_list[i].relocation_count;
+ }
+
+ /* Leave the user relocations as are, this is the painfully slow path,
+ * and we want to avoid the complication of dropping the lock whilst
+ * having buffers reserved in the aperture and so causing spurious
+ * ENOSPC for random operations.
+ */
+
+err:
+ drm_free_large(reloc);
+ return ret;
+}
+
+static int
i915_gem_execbuffer_move_to_gpu(struct drm_device *dev,
struct drm_file *file,
struct intel_ring_buffer *ring,
@@ -3630,8 +3742,15 @@
for (i = 0; i < count; i++) {
char __user *ptr = (char __user *)(uintptr_t)exec[i].relocs_ptr;
- size_t length = exec[i].relocation_count * sizeof(struct drm_i915_gem_relocation_entry);
+ int length; /* limited by fault_in_pages_readable() */
+ /* First check for malicious input causing overflow */
+ if (exec[i].relocation_count >
+ INT_MAX / sizeof(struct drm_i915_gem_relocation_entry))
+ return -EINVAL;
+
+ length = exec[i].relocation_count *
+ sizeof(struct drm_i915_gem_relocation_entry);
if (!access_ok(VERIFY_READ, ptr, length))
return -EFAULT;
@@ -3774,18 +3893,24 @@
}
/* Move the objects en-masse into the GTT, evicting if necessary. */
- ret = i915_gem_execbuffer_pin(dev, file,
- object_list, exec_list,
- args->buffer_count);
+ ret = i915_gem_execbuffer_reserve(dev, file,
+ object_list, exec_list,
+ args->buffer_count);
if (ret)
goto err;
/* The objects are in their final locations, apply the relocations. */
- for (i = 0; i < args->buffer_count; i++) {
- struct drm_i915_gem_object *obj = to_intel_bo(object_list[i]);
- obj->base.pending_read_domains = 0;
- obj->base.pending_write_domain = 0;
- ret = i915_gem_execbuffer_relocate(obj, file, &exec_list[i]);
+ ret = i915_gem_execbuffer_relocate(dev, file,
+ object_list, exec_list,
+ args->buffer_count);
+ if (ret) {
+ if (ret == -EFAULT) {
+ ret = i915_gem_execbuffer_relocate_slow(dev, file,
+ object_list,
+ exec_list,
+ args->buffer_count);
+ BUG_ON(!mutex_is_locked(&dev->struct_mutex));
+ }
if (ret)
goto err;
}
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 454c064..42729d2 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -239,6 +239,16 @@
if (drm_core_check_feature(dev, DRIVER_MODESET))
return;
+ /* Cursor state */
+ dev_priv->saveCURACNTR = I915_READ(CURACNTR);
+ dev_priv->saveCURAPOS = I915_READ(CURAPOS);
+ dev_priv->saveCURABASE = I915_READ(CURABASE);
+ dev_priv->saveCURBCNTR = I915_READ(CURBCNTR);
+ dev_priv->saveCURBPOS = I915_READ(CURBPOS);
+ dev_priv->saveCURBBASE = I915_READ(CURBBASE);
+ if (IS_GEN2(dev))
+ dev_priv->saveCURSIZE = I915_READ(CURSIZE);
+
if (HAS_PCH_SPLIT(dev)) {
dev_priv->savePCH_DREF_CONTROL = I915_READ(PCH_DREF_CONTROL);
dev_priv->saveDISP_ARB_CTL = I915_READ(DISP_ARB_CTL);
@@ -529,6 +539,16 @@
I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR);
I915_WRITE(DSPBADDR, I915_READ(DSPBADDR));
+ /* Cursor state */
+ I915_WRITE(CURAPOS, dev_priv->saveCURAPOS);
+ I915_WRITE(CURACNTR, dev_priv->saveCURACNTR);
+ I915_WRITE(CURABASE, dev_priv->saveCURABASE);
+ I915_WRITE(CURBPOS, dev_priv->saveCURBPOS);
+ I915_WRITE(CURBCNTR, dev_priv->saveCURBCNTR);
+ I915_WRITE(CURBBASE, dev_priv->saveCURBBASE);
+ if (IS_GEN2(dev))
+ I915_WRITE(CURSIZE, dev_priv->saveCURSIZE);
+
return;
}
@@ -543,16 +563,6 @@
/* Don't save them in KMS mode */
i915_save_modeset_reg(dev);
- /* Cursor state */
- dev_priv->saveCURACNTR = I915_READ(CURACNTR);
- dev_priv->saveCURAPOS = I915_READ(CURAPOS);
- dev_priv->saveCURABASE = I915_READ(CURABASE);
- dev_priv->saveCURBCNTR = I915_READ(CURBCNTR);
- dev_priv->saveCURBPOS = I915_READ(CURBPOS);
- dev_priv->saveCURBBASE = I915_READ(CURBBASE);
- if (IS_GEN2(dev))
- dev_priv->saveCURSIZE = I915_READ(CURSIZE);
-
/* CRT state */
if (HAS_PCH_SPLIT(dev)) {
dev_priv->saveADPA = I915_READ(PCH_ADPA);
@@ -657,16 +667,6 @@
/* Don't restore them in KMS mode */
i915_restore_modeset_reg(dev);
- /* Cursor state */
- I915_WRITE(CURAPOS, dev_priv->saveCURAPOS);
- I915_WRITE(CURACNTR, dev_priv->saveCURACNTR);
- I915_WRITE(CURABASE, dev_priv->saveCURABASE);
- I915_WRITE(CURBPOS, dev_priv->saveCURBPOS);
- I915_WRITE(CURBCNTR, dev_priv->saveCURBCNTR);
- I915_WRITE(CURBBASE, dev_priv->saveCURBBASE);
- if (IS_GEN2(dev))
- I915_WRITE(CURSIZE, dev_priv->saveCURSIZE);
-
/* CRT state */
if (HAS_PCH_SPLIT(dev))
I915_WRITE(PCH_ADPA, dev_priv->saveADPA);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index bee24b1..255b52e 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5336,9 +5336,14 @@
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_encoder *encoder;
bool dpd_is_edp = false;
+ bool has_lvds = false;
if (IS_MOBILE(dev) && !IS_I830(dev))
- intel_lvds_init(dev);
+ has_lvds = intel_lvds_init(dev);
+ if (!has_lvds && !HAS_PCH_SPLIT(dev)) {
+ /* disable the panel fitter on everything but LVDS */
+ I915_WRITE(PFIT_CONTROL, 0);
+ }
if (HAS_PCH_SPLIT(dev)) {
dpd_is_edp = intel_dpd_is_edp(dev);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index c8e0055..300f64b 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -584,17 +584,6 @@
mode->clock = dev_priv->panel_fixed_mode->clock;
}
- /* Just use VBT values for eDP */
- if (is_edp(intel_dp)) {
- intel_dp->lane_count = dev_priv->edp.lanes;
- intel_dp->link_bw = dev_priv->edp.rate;
- adjusted_mode->clock = intel_dp_link_clock(intel_dp->link_bw);
- DRM_DEBUG_KMS("eDP link bw %02x lane count %d clock %d\n",
- intel_dp->link_bw, intel_dp->lane_count,
- adjusted_mode->clock);
- return true;
- }
-
for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
for (clock = 0; clock <= max_clock; clock++) {
int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
@@ -613,6 +602,19 @@
}
}
+ if (is_edp(intel_dp)) {
+ /* okay we failed just pick the highest */
+ intel_dp->lane_count = max_lane_count;
+ intel_dp->link_bw = bws[max_clock];
+ adjusted_mode->clock = intel_dp_link_clock(intel_dp->link_bw);
+ DRM_DEBUG_KMS("Force picking display port link bw %02x lane "
+ "count %d clock %d\n",
+ intel_dp->link_bw, intel_dp->lane_count,
+ adjusted_mode->clock);
+
+ return true;
+ }
+
return false;
}
@@ -1087,21 +1089,11 @@
}
static uint32_t
-intel_dp_signal_levels(struct intel_dp *intel_dp)
+intel_dp_signal_levels(uint8_t train_set, int lane_count)
{
- struct drm_device *dev = intel_dp->base.base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- uint32_t signal_levels = 0;
- u8 train_set = intel_dp->train_set[0];
- u32 vswing = train_set & DP_TRAIN_VOLTAGE_SWING_MASK;
- u32 preemphasis = train_set & DP_TRAIN_PRE_EMPHASIS_MASK;
+ uint32_t signal_levels = 0;
- if (is_edp(intel_dp)) {
- vswing = dev_priv->edp.vswing;
- preemphasis = dev_priv->edp.preemphasis;
- }
-
- switch (vswing) {
+ switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
case DP_TRAIN_VOLTAGE_SWING_400:
default:
signal_levels |= DP_VOLTAGE_0_4;
@@ -1116,7 +1108,7 @@
signal_levels |= DP_VOLTAGE_1_2;
break;
}
- switch (preemphasis) {
+ switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
case DP_TRAIN_PRE_EMPHASIS_0:
default:
signal_levels |= DP_PRE_EMPHASIS_0;
@@ -1203,18 +1195,6 @@
}
static bool
-intel_dp_aux_handshake_required(struct intel_dp *intel_dp)
-{
- struct drm_device *dev = intel_dp->base.base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- if (is_edp(intel_dp) && dev_priv->no_aux_handshake)
- return false;
-
- return true;
-}
-
-static bool
intel_dp_set_link_train(struct intel_dp *intel_dp,
uint32_t dp_reg_value,
uint8_t dp_train_pat)
@@ -1226,9 +1206,6 @@
I915_WRITE(intel_dp->output_reg, dp_reg_value);
POSTING_READ(intel_dp->output_reg);
- if (!intel_dp_aux_handshake_required(intel_dp))
- return true;
-
intel_dp_aux_native_write_1(intel_dp,
DP_TRAINING_PATTERN_SET,
dp_train_pat);
@@ -1261,11 +1238,10 @@
POSTING_READ(intel_dp->output_reg);
intel_wait_for_vblank(dev, intel_crtc->pipe);
- if (intel_dp_aux_handshake_required(intel_dp))
- /* Write the link configuration data */
- intel_dp_aux_native_write(intel_dp, DP_LINK_BW_SET,
- intel_dp->link_configuration,
- DP_LINK_CONFIGURATION_SIZE);
+ /* Write the link configuration data */
+ intel_dp_aux_native_write(intel_dp, DP_LINK_BW_SET,
+ intel_dp->link_configuration,
+ DP_LINK_CONFIGURATION_SIZE);
DP |= DP_PORT_EN;
if (HAS_PCH_CPT(dev) && !is_edp(intel_dp))
@@ -1283,7 +1259,7 @@
signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
} else {
- signal_levels = intel_dp_signal_levels(intel_dp);
+ signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count);
DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
}
@@ -1297,37 +1273,33 @@
break;
/* Set training pattern 1 */
- udelay(500);
- if (intel_dp_aux_handshake_required(intel_dp)) {
+ udelay(100);
+ if (!intel_dp_get_link_status(intel_dp))
break;
- } else {
- if (!intel_dp_get_link_status(intel_dp))
- break;
- if (intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) {
- clock_recovery = true;
- break;
- }
-
- /* Check to see if we've tried the max voltage */
- for (i = 0; i < intel_dp->lane_count; i++)
- if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
- break;
- if (i == intel_dp->lane_count)
- break;
-
- /* Check to see if we've tried the same voltage 5 times */
- if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
- ++tries;
- if (tries == 5)
- break;
- } else
- tries = 0;
- voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
-
- /* Compute new intel_dp->train_set as requested by target */
- intel_get_adjust_train(intel_dp);
+ if (intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) {
+ clock_recovery = true;
+ break;
}
+
+ /* Check to see if we've tried the max voltage */
+ for (i = 0; i < intel_dp->lane_count; i++)
+ if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
+ break;
+ if (i == intel_dp->lane_count)
+ break;
+
+ /* Check to see if we've tried the same voltage 5 times */
+ if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
+ ++tries;
+ if (tries == 5)
+ break;
+ } else
+ tries = 0;
+ voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
+
+ /* Compute new intel_dp->train_set as requested by target */
+ intel_get_adjust_train(intel_dp);
}
intel_dp->DP = DP;
@@ -1354,7 +1326,7 @@
signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
} else {
- signal_levels = intel_dp_signal_levels(intel_dp);
+ signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count);
DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
}
@@ -1368,28 +1340,24 @@
DP_TRAINING_PATTERN_2))
break;
- udelay(500);
-
- if (!intel_dp_aux_handshake_required(intel_dp)) {
+ udelay(400);
+ if (!intel_dp_get_link_status(intel_dp))
break;
- } else {
- if (!intel_dp_get_link_status(intel_dp))
- break;
- if (intel_channel_eq_ok(intel_dp)) {
- channel_eq = true;
- break;
- }
-
- /* Try 5 times */
- if (tries > 5)
- break;
-
- /* Compute new intel_dp->train_set as requested by target */
- intel_get_adjust_train(intel_dp);
- ++tries;
+ if (intel_channel_eq_ok(intel_dp)) {
+ channel_eq = true;
+ break;
}
+
+ /* Try 5 times */
+ if (tries > 5)
+ break;
+
+ /* Compute new intel_dp->train_set as requested by target */
+ intel_get_adjust_train(intel_dp);
+ ++tries;
}
+
if (HAS_PCH_CPT(dev) && !is_edp(intel_dp))
reg = DP | DP_LINK_TRAIN_OFF_CPT;
else
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 21551fe..e52c612 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -237,7 +237,7 @@
extern void intel_dvo_init(struct drm_device *dev);
extern void intel_tv_init(struct drm_device *dev);
extern void intel_mark_busy(struct drm_device *dev, struct drm_gem_object *obj);
-extern void intel_lvds_init(struct drm_device *dev);
+extern bool intel_lvds_init(struct drm_device *dev);
extern void intel_dp_init(struct drm_device *dev, int dp_reg);
void
intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 4324a32..f79327f 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -837,7 +837,7 @@
* Create the connector, register the LVDS DDC bus, and try to figure out what
* modes we can display on the LVDS panel (if present).
*/
-void intel_lvds_init(struct drm_device *dev)
+bool intel_lvds_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_lvds *intel_lvds;
@@ -853,37 +853,37 @@
/* Skip init on machines we know falsely report LVDS */
if (dmi_check_system(intel_no_lvds))
- return;
+ return false;
pin = GMBUS_PORT_PANEL;
if (!lvds_is_present_in_vbt(dev, &pin)) {
DRM_DEBUG_KMS("LVDS is not present in VBT\n");
- return;
+ return false;
}
if (HAS_PCH_SPLIT(dev)) {
if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0)
- return;
+ return false;
if (dev_priv->edp.support) {
DRM_DEBUG_KMS("disable LVDS for eDP support\n");
- return;
+ return false;
}
}
if (!intel_lvds_ddc_probe(dev, pin)) {
DRM_DEBUG_KMS("LVDS did not respond to DDC probe\n");
- return;
+ return false;
}
intel_lvds = kzalloc(sizeof(struct intel_lvds), GFP_KERNEL);
if (!intel_lvds) {
- return;
+ return false;
}
intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
if (!intel_connector) {
kfree(intel_lvds);
- return;
+ return false;
}
if (!HAS_PCH_SPLIT(dev)) {
@@ -1026,7 +1026,7 @@
/* keep the LVDS connector */
dev_priv->int_lvds_connector = connector;
drm_sysfs_connector_add(connector);
- return;
+ return true;
failed:
DRM_DEBUG_KMS("No LVDS modes found, disabling.\n");
@@ -1034,4 +1034,5 @@
drm_encoder_cleanup(encoder);
kfree(intel_lvds);
kfree(intel_connector);
+ return false;
}
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index de158b7..d97e6cb 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -107,7 +107,8 @@
* This is set if we treat the device as HDMI, instead of DVI.
*/
bool is_hdmi;
- bool has_audio;
+ bool has_hdmi_monitor;
+ bool has_hdmi_audio;
/**
* This is set if we detect output of sdvo device as LVDS and
@@ -1023,7 +1024,7 @@
if (!intel_sdvo_set_target_input(intel_sdvo))
return;
- if (intel_sdvo->is_hdmi &&
+ if (intel_sdvo->has_hdmi_monitor &&
!intel_sdvo_set_avi_infoframe(intel_sdvo))
return;
@@ -1063,7 +1064,7 @@
}
if (intel_crtc->pipe == 1)
sdvox |= SDVO_PIPE_B_SELECT;
- if (intel_sdvo->has_audio)
+ if (intel_sdvo->has_hdmi_audio)
sdvox |= SDVO_AUDIO_ENABLE;
if (INTEL_INFO(dev)->gen >= 4) {
@@ -1295,55 +1296,14 @@
return drm_get_edid(connector, &sdvo->ddc);
}
-static struct drm_connector *
-intel_find_analog_connector(struct drm_device *dev)
-{
- struct drm_connector *connector;
- struct intel_sdvo *encoder;
-
- list_for_each_entry(encoder,
- &dev->mode_config.encoder_list,
- base.base.head) {
- if (encoder->base.type == INTEL_OUTPUT_ANALOG) {
- list_for_each_entry(connector,
- &dev->mode_config.connector_list,
- head) {
- if (&encoder->base ==
- intel_attached_encoder(connector))
- return connector;
- }
- }
- }
-
- return NULL;
-}
-
-static int
-intel_analog_is_connected(struct drm_device *dev)
-{
- struct drm_connector *analog_connector;
-
- analog_connector = intel_find_analog_connector(dev);
- if (!analog_connector)
- return false;
-
- if (analog_connector->funcs->detect(analog_connector, false) ==
- connector_status_disconnected)
- return false;
-
- return true;
-}
-
/* Mac mini hack -- use the same DDC as the analog connector */
static struct edid *
intel_sdvo_get_analog_edid(struct drm_connector *connector)
{
struct drm_i915_private *dev_priv = connector->dev->dev_private;
- if (!intel_analog_is_connected(connector->dev))
- return NULL;
-
- return drm_get_edid(connector, &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
+ return drm_get_edid(connector,
+ &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
}
enum drm_connector_status
@@ -1388,8 +1348,10 @@
/* DDC bus is shared, match EDID to connector type */
if (edid->input & DRM_EDID_INPUT_DIGITAL) {
status = connector_status_connected;
- intel_sdvo->is_hdmi = drm_detect_hdmi_monitor(edid);
- intel_sdvo->has_audio = drm_detect_monitor_audio(edid);
+ if (intel_sdvo->is_hdmi) {
+ intel_sdvo->has_hdmi_monitor = drm_detect_hdmi_monitor(edid);
+ intel_sdvo->has_hdmi_audio = drm_detect_monitor_audio(edid);
+ }
}
connector->display_info.raw_edid = NULL;
kfree(edid);
@@ -1398,7 +1360,7 @@
if (status == connector_status_connected) {
struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector);
if (intel_sdvo_connector->force_audio)
- intel_sdvo->has_audio = intel_sdvo_connector->force_audio > 0;
+ intel_sdvo->has_hdmi_audio = intel_sdvo_connector->force_audio > 0;
}
return status;
@@ -1415,10 +1377,12 @@
if (!intel_sdvo_write_cmd(intel_sdvo,
SDVO_CMD_GET_ATTACHED_DISPLAYS, NULL, 0))
return connector_status_unknown;
- if (intel_sdvo->is_tv) {
- /* add 30ms delay when the output type is SDVO-TV */
+
+ /* add 30ms delay when the output type might be TV */
+ if (intel_sdvo->caps.output_flags &
+ (SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_CVBS0))
mdelay(30);
- }
+
if (!intel_sdvo_read_response(intel_sdvo, &response, 2))
return connector_status_unknown;
@@ -1472,8 +1436,10 @@
edid = intel_sdvo_get_analog_edid(connector);
if (edid != NULL) {
- drm_mode_connector_update_edid_property(connector, edid);
- drm_add_edid_modes(connector, edid);
+ if (edid->input & DRM_EDID_INPUT_DIGITAL) {
+ drm_mode_connector_update_edid_property(connector, edid);
+ drm_add_edid_modes(connector, edid);
+ }
connector->display_info.raw_edid = NULL;
kfree(edid);
}
@@ -1713,12 +1679,12 @@
intel_sdvo_connector->force_audio = val;
- if (val > 0 && intel_sdvo->has_audio)
+ if (val > 0 && intel_sdvo->has_hdmi_audio)
return 0;
- if (val < 0 && !intel_sdvo->has_audio)
+ if (val < 0 && !intel_sdvo->has_hdmi_audio)
return 0;
- intel_sdvo->has_audio = val > 0;
+ intel_sdvo->has_hdmi_audio = val > 0;
goto done;
}
@@ -2070,6 +2036,8 @@
intel_sdvo_set_colorimetry(intel_sdvo,
SDVO_COLORIMETRY_RGB256);
connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
+
+ intel_sdvo_add_hdmi_properties(intel_sdvo_connector);
intel_sdvo->is_hdmi = true;
}
intel_sdvo->base.clone_mask = ((1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
@@ -2077,8 +2045,6 @@
intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
- intel_sdvo_add_hdmi_properties(intel_sdvo_connector);
-
return true;
}
diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c
index 8e421f6..05efb5b 100644
--- a/drivers/gpu/drm/radeon/atom.c
+++ b/drivers/gpu/drm/radeon/atom.c
@@ -112,6 +112,7 @@
base += 3;
break;
case ATOM_IIO_WRITE:
+ (void)ctx->card->ioreg_read(ctx->card, CU16(base + 1));
ctx->card->ioreg_write(ctx->card, CU16(base + 1), temp);
base += 3;
break;
diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index 9bebac1..0f90fc3 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -315,7 +315,7 @@
if (array_mode == V_0280A0_ARRAY_LINEAR_GENERAL) {
/* the initial DDX does bad things with the CB size occasionally */
/* it rounds up height too far for slice tile max but the BO is smaller */
- tmp = (height - 7) * pitch * bpe;
+ tmp = (height - 7) * 8 * bpe;
if ((tmp + track->cb_color_bo_offset[i]) > radeon_bo_size(track->cb_color_bo[i])) {
dev_warn(p->dev, "%s offset[%d] %d %d %lu too big\n", __func__, i, track->cb_color_bo_offset[i], tmp, radeon_bo_size(track->cb_color_bo[i]));
return -EINVAL;
diff --git a/drivers/gpu/drm/radeon/r600_reg.h b/drivers/gpu/drm/radeon/r600_reg.h
index d84612a..33cda01 100644
--- a/drivers/gpu/drm/radeon/r600_reg.h
+++ b/drivers/gpu/drm/radeon/r600_reg.h
@@ -86,6 +86,7 @@
#define R600_HDP_NONSURFACE_BASE 0x2c04
#define R600_BUS_CNTL 0x5420
+# define R600_BIOS_ROM_DIS (1 << 1)
#define R600_CONFIG_CNTL 0x5424
#define R600_CONFIG_MEMSIZE 0x5428
#define R600_CONFIG_F0_BASE 0x542C
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 87ead09..bc5a2c3 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -98,6 +98,14 @@
}
}
+ /* some DCE3 boards have bad data for this entry */
+ if (ASIC_IS_DCE3(rdev)) {
+ if ((i == 4) &&
+ (gpio->usClkMaskRegisterIndex == 0x1fda) &&
+ (gpio->sucI2cId.ucAccess == 0x94))
+ gpio->sucI2cId.ucAccess = 0x14;
+ }
+
if (gpio->sucI2cId.ucAccess == id) {
i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4;
i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4;
@@ -174,6 +182,14 @@
}
}
+ /* some DCE3 boards have bad data for this entry */
+ if (ASIC_IS_DCE3(rdev)) {
+ if ((i == 4) &&
+ (gpio->usClkMaskRegisterIndex == 0x1fda) &&
+ (gpio->sucI2cId.ucAccess == 0x94))
+ gpio->sucI2cId.ucAccess = 0x14;
+ }
+
i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4;
i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4;
i2c.en_clk_reg = le16_to_cpu(gpio->usClkEnRegisterIndex) * 4;
diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c
index 654787e..8f2c7b5 100644
--- a/drivers/gpu/drm/radeon/radeon_bios.c
+++ b/drivers/gpu/drm/radeon/radeon_bios.c
@@ -130,6 +130,7 @@
}
return true;
}
+
static bool r700_read_disabled_bios(struct radeon_device *rdev)
{
uint32_t viph_control;
@@ -143,7 +144,7 @@
bool r;
viph_control = RREG32(RADEON_VIPH_CONTROL);
- bus_cntl = RREG32(RADEON_BUS_CNTL);
+ bus_cntl = RREG32(R600_BUS_CNTL);
d1vga_control = RREG32(AVIVO_D1VGA_CONTROL);
d2vga_control = RREG32(AVIVO_D2VGA_CONTROL);
vga_render_control = RREG32(AVIVO_VGA_RENDER_CONTROL);
@@ -152,7 +153,7 @@
/* disable VIP */
WREG32(RADEON_VIPH_CONTROL, (viph_control & ~RADEON_VIPH_EN));
/* enable the rom */
- WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM));
+ WREG32(R600_BUS_CNTL, (bus_cntl & ~R600_BIOS_ROM_DIS));
/* Disable VGA mode */
WREG32(AVIVO_D1VGA_CONTROL,
(d1vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE |
@@ -191,7 +192,7 @@
cg_spll_status = RREG32(R600_CG_SPLL_STATUS);
}
WREG32(RADEON_VIPH_CONTROL, viph_control);
- WREG32(RADEON_BUS_CNTL, bus_cntl);
+ WREG32(R600_BUS_CNTL, bus_cntl);
WREG32(AVIVO_D1VGA_CONTROL, d1vga_control);
WREG32(AVIVO_D2VGA_CONTROL, d2vga_control);
WREG32(AVIVO_VGA_RENDER_CONTROL, vga_render_control);
@@ -216,7 +217,7 @@
bool r;
viph_control = RREG32(RADEON_VIPH_CONTROL);
- bus_cntl = RREG32(RADEON_BUS_CNTL);
+ bus_cntl = RREG32(R600_BUS_CNTL);
d1vga_control = RREG32(AVIVO_D1VGA_CONTROL);
d2vga_control = RREG32(AVIVO_D2VGA_CONTROL);
vga_render_control = RREG32(AVIVO_VGA_RENDER_CONTROL);
@@ -231,7 +232,7 @@
/* disable VIP */
WREG32(RADEON_VIPH_CONTROL, (viph_control & ~RADEON_VIPH_EN));
/* enable the rom */
- WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM));
+ WREG32(R600_BUS_CNTL, (bus_cntl & ~R600_BIOS_ROM_DIS));
/* Disable VGA mode */
WREG32(AVIVO_D1VGA_CONTROL,
(d1vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE |
@@ -262,7 +263,7 @@
/* restore regs */
WREG32(RADEON_VIPH_CONTROL, viph_control);
- WREG32(RADEON_BUS_CNTL, bus_cntl);
+ WREG32(R600_BUS_CNTL, bus_cntl);
WREG32(AVIVO_D1VGA_CONTROL, d1vga_control);
WREG32(AVIVO_D2VGA_CONTROL, d2vga_control);
WREG32(AVIVO_VGA_RENDER_CONTROL, vga_render_control);
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index 3bddea5..137b807 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -729,7 +729,7 @@
clk = RBIOS8(offset + 3 + (i * 5) + 3);
data = RBIOS8(offset + 3 + (i * 5) + 4);
i2c = combios_setup_i2c_bus(rdev, DDC_MONID,
- clk, data);
+ (1 << clk), (1 << data));
rdev->i2c_bus[4] = radeon_i2c_create(dev, &i2c, "GPIOPAD_MASK");
break;
}
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 3bef9f6..8afaf7a 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -1175,6 +1175,8 @@
/* no HPD on analog connectors */
radeon_connector->hpd.hpd = RADEON_HPD_NONE;
connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+ connector->interlace_allowed = true;
+ connector->doublescan_allowed = true;
break;
case DRM_MODE_CONNECTOR_DVIA:
drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
@@ -1190,6 +1192,8 @@
1);
/* no HPD on analog connectors */
radeon_connector->hpd.hpd = RADEON_HPD_NONE;
+ connector->interlace_allowed = true;
+ connector->doublescan_allowed = true;
break;
case DRM_MODE_CONNECTOR_DVII:
case DRM_MODE_CONNECTOR_DVID:
@@ -1226,6 +1230,11 @@
rdev->mode_info.load_detect_property,
1);
}
+ connector->interlace_allowed = true;
+ if (connector_type == DRM_MODE_CONNECTOR_DVII)
+ connector->doublescan_allowed = true;
+ else
+ connector->doublescan_allowed = false;
break;
case DRM_MODE_CONNECTOR_HDMIA:
case DRM_MODE_CONNECTOR_HDMIB:
@@ -1256,6 +1265,11 @@
0);
}
subpixel_order = SubPixelHorizontalRGB;
+ connector->interlace_allowed = true;
+ if (connector_type == DRM_MODE_CONNECTOR_HDMIB)
+ connector->doublescan_allowed = true;
+ else
+ connector->doublescan_allowed = false;
break;
case DRM_MODE_CONNECTOR_DisplayPort:
case DRM_MODE_CONNECTOR_eDP:
@@ -1293,6 +1307,9 @@
rdev->mode_info.underscan_vborder_property,
0);
}
+ connector->interlace_allowed = true;
+ /* in theory with a DP to VGA converter... */
+ connector->doublescan_allowed = false;
break;
case DRM_MODE_CONNECTOR_SVIDEO:
case DRM_MODE_CONNECTOR_Composite:
@@ -1308,6 +1325,8 @@
radeon_atombios_get_tv_info(rdev));
/* no HPD on analog connectors */
radeon_connector->hpd.hpd = RADEON_HPD_NONE;
+ connector->interlace_allowed = false;
+ connector->doublescan_allowed = false;
break;
case DRM_MODE_CONNECTOR_LVDS:
radeon_dig_connector = kzalloc(sizeof(struct radeon_connector_atom_dig), GFP_KERNEL);
@@ -1326,6 +1345,8 @@
dev->mode_config.scaling_mode_property,
DRM_MODE_SCALE_FULLSCREEN);
subpixel_order = SubPixelHorizontalRGB;
+ connector->interlace_allowed = false;
+ connector->doublescan_allowed = false;
break;
}
@@ -1403,6 +1424,8 @@
/* no HPD on analog connectors */
radeon_connector->hpd.hpd = RADEON_HPD_NONE;
connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+ connector->interlace_allowed = true;
+ connector->doublescan_allowed = true;
break;
case DRM_MODE_CONNECTOR_DVIA:
drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
@@ -1418,6 +1441,8 @@
1);
/* no HPD on analog connectors */
radeon_connector->hpd.hpd = RADEON_HPD_NONE;
+ connector->interlace_allowed = true;
+ connector->doublescan_allowed = true;
break;
case DRM_MODE_CONNECTOR_DVII:
case DRM_MODE_CONNECTOR_DVID:
@@ -1435,6 +1460,11 @@
1);
}
subpixel_order = SubPixelHorizontalRGB;
+ connector->interlace_allowed = true;
+ if (connector_type == DRM_MODE_CONNECTOR_DVII)
+ connector->doublescan_allowed = true;
+ else
+ connector->doublescan_allowed = false;
break;
case DRM_MODE_CONNECTOR_SVIDEO:
case DRM_MODE_CONNECTOR_Composite:
@@ -1457,6 +1487,8 @@
radeon_combios_get_tv_info(rdev));
/* no HPD on analog connectors */
radeon_connector->hpd.hpd = RADEON_HPD_NONE;
+ connector->interlace_allowed = false;
+ connector->doublescan_allowed = false;
break;
case DRM_MODE_CONNECTOR_LVDS:
drm_connector_init(dev, &radeon_connector->base, &radeon_lvds_connector_funcs, connector_type);
@@ -1470,6 +1502,8 @@
dev->mode_config.scaling_mode_property,
DRM_MODE_SCALE_FULLSCREEN);
subpixel_order = SubPixelHorizontalRGB;
+ connector->interlace_allowed = false;
+ connector->doublescan_allowed = false;
break;
}
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 515345b..88cb04e 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1386,6 +1386,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb653) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2, USB_DEVICE_ID_TOPSEED2_RF_COMBO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TWINHAN, USB_DEVICE_ID_TWINHAN_IR_REMOTE) },
diff --git a/drivers/hid/hid-egalax.c b/drivers/hid/hid-egalax.c
index 54b017a..5a1b52e 100644
--- a/drivers/hid/hid-egalax.c
+++ b/drivers/hid/hid-egalax.c
@@ -221,7 +221,7 @@
struct egalax_data *td;
struct hid_report *report;
- td = kmalloc(sizeof(struct egalax_data), GFP_KERNEL);
+ td = kzalloc(sizeof(struct egalax_data), GFP_KERNEL);
if (!td) {
dev_err(&hdev->dev, "cannot allocate eGalax data\n");
return -ENOMEM;
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index bb0b365..d8d372b 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -174,7 +174,7 @@
clear_bit(*old_keycode, dev->keybit);
set_bit(usage->code, dev->keybit);
- dbg_hid(KERN_DEBUG "Assigned keycode %d to HID usage code %x\n",
+ dbg_hid("Assigned keycode %d to HID usage code %x\n",
usage->code, usage->hid);
/*
@@ -203,8 +203,8 @@
*
* as seen in the HID specification v1.11 6.2.2.7 Global Items.
*
- * Only exponent 1 length units are processed. Centimeters are converted to
- * inches. Degrees are converted to radians.
+ * Only exponent 1 length units are processed. Centimeters and inches are
+ * converted to millimeters. Degrees are converted to radians.
*/
static __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code)
{
@@ -225,13 +225,16 @@
*/
if (code == ABS_X || code == ABS_Y || code == ABS_Z) {
if (field->unit == 0x11) { /* If centimeters */
- /* Convert to inches */
- prev = logical_extents;
- logical_extents *= 254;
- if (logical_extents < prev)
+ /* Convert to millimeters */
+ unit_exponent += 1;
+ } else if (field->unit == 0x13) { /* If inches */
+ /* Convert to millimeters */
+ prev = physical_extents;
+ physical_extents *= 254;
+ if (physical_extents < prev)
return 0;
- unit_exponent += 2;
- } else if (field->unit != 0x13) { /* If not inches */
+ unit_exponent -= 1;
+ } else {
return 0;
}
} else if (code == ABS_RX || code == ABS_RY || code == ABS_RZ) {
diff --git a/drivers/hid/hid-tmff.c b/drivers/hid/hid-tmff.c
index 15434c8..25be4e1 100644
--- a/drivers/hid/hid-tmff.c
+++ b/drivers/hid/hid-tmff.c
@@ -256,6 +256,8 @@
.driver_data = (unsigned long)ff_joystick },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654), /* FGT Force Feedback Wheel */
.driver_data = (unsigned long)ff_joystick },
+ { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a), /* F430 Force Feedback Wheel */
+ .driver_data = (unsigned long)ff_joystick },
{ }
};
MODULE_DEVICE_TABLE(hid, tm_devices);
diff --git a/drivers/infiniband/core/ud_header.c b/drivers/infiniband/core/ud_header.c
index bb7e192..9b737ff 100644
--- a/drivers/infiniband/core/ud_header.c
+++ b/drivers/infiniband/core/ud_header.c
@@ -278,36 +278,6 @@
EXPORT_SYMBOL(ib_ud_header_init);
/**
- * ib_lrh_header_pack - Pack LRH header struct into wire format
- * @lrh:unpacked LRH header struct
- * @buf:Buffer to pack into
- *
- * ib_lrh_header_pack() packs the LRH header structure @lrh into
- * wire format in the buffer @buf.
- */
-int ib_lrh_header_pack(struct ib_unpacked_lrh *lrh, void *buf)
-{
- ib_pack(lrh_table, ARRAY_SIZE(lrh_table), lrh, buf);
- return 0;
-}
-EXPORT_SYMBOL(ib_lrh_header_pack);
-
-/**
- * ib_lrh_header_unpack - Unpack LRH structure from wire format
- * @lrh:unpacked LRH header struct
- * @buf:Buffer to pack into
- *
- * ib_lrh_header_unpack() unpacks the LRH header structure from
- * wire format (in buf) into @lrh.
- */
-int ib_lrh_header_unpack(void *buf, struct ib_unpacked_lrh *lrh)
-{
- ib_unpack(lrh_table, ARRAY_SIZE(lrh_table), buf, lrh);
- return 0;
-}
-EXPORT_SYMBOL(ib_lrh_header_unpack);
-
-/**
* ib_ud_header_pack - Pack UD header struct into wire format
* @header:UD header struct
* @buf:Buffer to pack into
diff --git a/drivers/infiniband/core/uverbs_marshall.c b/drivers/infiniband/core/uverbs_marshall.c
index 5440da0..1b1146f 100644
--- a/drivers/infiniband/core/uverbs_marshall.c
+++ b/drivers/infiniband/core/uverbs_marshall.c
@@ -40,18 +40,21 @@
dst->grh.sgid_index = src->grh.sgid_index;
dst->grh.hop_limit = src->grh.hop_limit;
dst->grh.traffic_class = src->grh.traffic_class;
+ memset(&dst->grh.reserved, 0, sizeof(dst->grh.reserved));
dst->dlid = src->dlid;
dst->sl = src->sl;
dst->src_path_bits = src->src_path_bits;
dst->static_rate = src->static_rate;
dst->is_global = src->ah_flags & IB_AH_GRH ? 1 : 0;
dst->port_num = src->port_num;
+ dst->reserved = 0;
}
EXPORT_SYMBOL(ib_copy_ah_attr_to_user);
void ib_copy_qp_attr_to_user(struct ib_uverbs_qp_attr *dst,
struct ib_qp_attr *src)
{
+ dst->qp_state = src->qp_state;
dst->cur_qp_state = src->cur_qp_state;
dst->path_mtu = src->path_mtu;
dst->path_mig_state = src->path_mig_state;
@@ -83,6 +86,7 @@
dst->rnr_retry = src->rnr_retry;
dst->alt_port_num = src->alt_port_num;
dst->alt_timeout = src->alt_timeout;
+ memset(dst->reserved, 0, sizeof(dst->reserved));
}
EXPORT_SYMBOL(ib_copy_qp_attr_to_user);
diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c
index bf3e20c..30e09ca 100644
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -219,7 +219,7 @@
struct net_device *ndev;
enum ib_mtu tmp;
- props->active_width = IB_WIDTH_4X;
+ props->active_width = IB_WIDTH_1X;
props->active_speed = 4;
props->port_cap_flags = IB_PORT_CM_SUP;
props->gid_tbl_len = to_mdev(ibdev)->dev->caps.gid_table_len[port];
@@ -242,7 +242,7 @@
tmp = iboe_get_mtu(ndev->mtu);
props->active_mtu = tmp ? min(props->max_mtu, tmp) : IB_MTU_256;
- props->state = netif_running(ndev) && netif_oper_up(ndev) ?
+ props->state = (netif_running(ndev) && netif_carrier_ok(ndev)) ?
IB_PORT_ACTIVE : IB_PORT_DOWN;
props->phys_state = state_to_phys_state(props->state);
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 9a7794a..2001f20 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -1816,6 +1816,11 @@
ctrl->fence_size = (wr->send_flags & IB_SEND_FENCE ?
MLX4_WQE_CTRL_FENCE : 0) | size;
+ if (be16_to_cpu(vlan) < 0x1000) {
+ ctrl->ins_vlan = 1 << 6;
+ ctrl->vlan_tag = vlan;
+ }
+
/*
* Make sure descriptor is fully written before
* setting ownership bit (because HW can start
@@ -1831,11 +1836,6 @@
ctrl->owner_opcode = mlx4_ib_opcode[wr->opcode] |
(ind & qp->sq.wqe_cnt ? cpu_to_be32(1 << 31) : 0) | blh;
- if (be16_to_cpu(vlan) < 0x1000) {
- ctrl->ins_vlan = 1 << 6;
- ctrl->vlan_tag = vlan;
- }
-
stamp = ind + qp->sq_spare_wqes;
ind += DIV_ROUND_UP(size * 16, 1U << qp->sq.wqe_shift);
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 77b8fd2..6f190f4 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -7,20 +7,20 @@
This is not related to standard keyboard LEDs which are controlled
via the input system.
-if NEW_LEDS
-
config LEDS_CLASS
bool "LED Class Support"
+ depends on NEW_LEDS
help
This option enables the led sysfs class in /sys/class/leds. You'll
need this to do anything useful with LEDs. If unsure, say N.
-if LEDS_CLASS
+if NEW_LEDS
comment "LED drivers"
config LEDS_88PM860X
tristate "LED Support for Marvell 88PM860x PMIC"
+ depends on LEDS_CLASS
depends on MFD_88PM860X
help
This option enables support for on-chip LED drivers found on Marvell
@@ -28,6 +28,7 @@
config LEDS_ATMEL_PWM
tristate "LED Support using Atmel PWM outputs"
+ depends on LEDS_CLASS
depends on ATMEL_PWM
help
This option enables support for LEDs driven using outputs
@@ -35,6 +36,7 @@
config LEDS_LOCOMO
tristate "LED Support for Locomo device"
+ depends on LEDS_CLASS
depends on SHARP_LOCOMO
help
This option enables support for the LEDs on Sharp Locomo.
@@ -42,6 +44,7 @@
config LEDS_MIKROTIK_RB532
tristate "LED Support for Mikrotik Routerboard 532"
+ depends on LEDS_CLASS
depends on MIKROTIK_RB532
help
This option enables support for the so called "User LED" of
@@ -49,6 +52,7 @@
config LEDS_S3C24XX
tristate "LED Support for Samsung S3C24XX GPIO LEDs"
+ depends on LEDS_CLASS
depends on ARCH_S3C2410
help
This option enables support for LEDs connected to GPIO lines
@@ -56,12 +60,14 @@
config LEDS_AMS_DELTA
tristate "LED Support for the Amstrad Delta (E3)"
+ depends on LEDS_CLASS
depends on MACH_AMS_DELTA
help
This option enables support for the LEDs on Amstrad Delta (E3).
config LEDS_NET48XX
tristate "LED Support for Soekris net48xx series Error LED"
+ depends on LEDS_CLASS
depends on SCx200_GPIO
help
This option enables support for the Soekris net4801 and net4826 error
@@ -79,18 +85,21 @@
config LEDS_FSG
tristate "LED Support for the Freecom FSG-3"
+ depends on LEDS_CLASS
depends on MACH_FSG
help
This option enables support for the LEDs on the Freecom FSG-3.
config LEDS_WRAP
tristate "LED Support for the WRAP series LEDs"
+ depends on LEDS_CLASS
depends on SCx200_GPIO
help
This option enables support for the PCEngines WRAP programmable LEDs.
config LEDS_ALIX2
tristate "LED Support for ALIX.2 and ALIX.3 series"
+ depends on LEDS_CLASS
depends on X86 && !GPIO_CS5535 && !CS5535_GPIO
help
This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
@@ -98,12 +107,14 @@
config LEDS_H1940
tristate "LED Support for iPAQ H1940 device"
+ depends on LEDS_CLASS
depends on ARCH_H1940
help
This option enables support for the LEDs on the h1940.
config LEDS_COBALT_QUBE
tristate "LED Support for the Cobalt Qube series front LED"
+ depends on LEDS_CLASS
depends on MIPS_COBALT
help
This option enables support for the front LED on Cobalt Qube series
@@ -117,6 +128,7 @@
config LEDS_SUNFIRE
tristate "LED support for SunFire servers."
+ depends on LEDS_CLASS
depends on SPARC64
select LEDS_TRIGGERS
help
@@ -125,6 +137,7 @@
config LEDS_HP6XX
tristate "LED Support for the HP Jornada 6xx"
+ depends on LEDS_CLASS
depends on SH_HP6XX
help
This option enables LED support for the handheld
@@ -132,6 +145,7 @@
config LEDS_PCA9532
tristate "LED driver for PCA9532 dimmer"
+ depends on LEDS_CLASS
depends on I2C && INPUT && EXPERIMENTAL
help
This option enables support for NXP pca9532
@@ -140,6 +154,7 @@
config LEDS_GPIO
tristate "LED Support for GPIO connected LEDs"
+ depends on LEDS_CLASS
depends on GENERIC_GPIO
help
This option enables support for the LEDs connected to GPIO
@@ -167,6 +182,7 @@
config LEDS_LP3944
tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
+ depends on LEDS_CLASS
depends on I2C
help
This option enables support for LEDs connected to the National
@@ -196,6 +212,7 @@
config LEDS_CLEVO_MAIL
tristate "Mail LED on Clevo notebook"
+ depends on LEDS_CLASS
depends on X86 && SERIO_I8042 && DMI
help
This driver makes the mail LED accessible from userspace
@@ -226,6 +243,7 @@
config LEDS_PCA955X
tristate "LED Support for PCA955x I2C chips"
+ depends on LEDS_CLASS
depends on I2C
help
This option enables support for LEDs connected to PCA955x
@@ -234,6 +252,7 @@
config LEDS_WM831X_STATUS
tristate "LED support for status LEDs on WM831x PMICs"
+ depends on LEDS_CLASS
depends on MFD_WM831X
help
This option enables support for the status LEDs of the WM831x
@@ -241,6 +260,7 @@
config LEDS_WM8350
tristate "LED Support for WM8350 AudioPlus PMIC"
+ depends on LEDS_CLASS
depends on MFD_WM8350
help
This option enables support for LEDs driven by the Wolfson
@@ -248,6 +268,7 @@
config LEDS_DA903X
tristate "LED Support for DA9030/DA9034 PMIC"
+ depends on LEDS_CLASS
depends on PMIC_DA903X
help
This option enables support for on-chip LED drivers found
@@ -255,6 +276,7 @@
config LEDS_DAC124S085
tristate "LED Support for DAC124S085 SPI DAC"
+ depends on LEDS_CLASS
depends on SPI
help
This option enables support for DAC124S085 SPI DAC from NatSemi,
@@ -262,18 +284,21 @@
config LEDS_PWM
tristate "PWM driven LED Support"
+ depends on LEDS_CLASS
depends on HAVE_PWM
help
This option enables support for pwm driven LEDs
config LEDS_REGULATOR
tristate "REGULATOR driven LED support"
+ depends on LEDS_CLASS
depends on REGULATOR
help
This option enables support for regulator driven LEDs.
config LEDS_BD2802
tristate "LED driver for BD2802 RGB LED"
+ depends on LEDS_CLASS
depends on I2C
help
This option enables support for BD2802GU RGB LED driver chips
@@ -281,6 +306,7 @@
config LEDS_INTEL_SS4200
tristate "LED driver for Intel NAS SS4200 series"
+ depends on LEDS_CLASS
depends on PCI && DMI
help
This option enables support for the Intel SS4200 series of
@@ -290,6 +316,7 @@
config LEDS_LT3593
tristate "LED driver for LT3593 controllers"
+ depends on LEDS_CLASS
depends on GENERIC_GPIO
help
This option enables support for LEDs driven by a Linear Technology
@@ -298,6 +325,7 @@
config LEDS_ADP5520
tristate "LED Support for ADP5520/ADP5501 PMIC"
+ depends on LEDS_CLASS
depends on PMIC_ADP5520
help
This option enables support for on-chip LED drivers found
@@ -308,6 +336,7 @@
config LEDS_DELL_NETBOOKS
tristate "External LED on Dell Business Netbooks"
+ depends on LEDS_CLASS
depends on X86 && ACPI_WMI
help
This adds support for the Latitude 2100 and similar
@@ -315,6 +344,7 @@
config LEDS_MC13783
tristate "LED Support for MC13783 PMIC"
+ depends on LEDS_CLASS
depends on MFD_MC13783
help
This option enable support for on-chip LED drivers found
@@ -322,6 +352,7 @@
config LEDS_NS2
tristate "LED support for Network Space v2 GPIO LEDs"
+ depends on LEDS_CLASS
depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || MACH_NETSPACE_MAX_V2 || D2NET_V2
default y
help
@@ -340,17 +371,17 @@
config LEDS_TRIGGERS
bool "LED Trigger support"
+ depends on LEDS_CLASS
help
This option enables trigger support for the leds class.
These triggers allow kernel events to drive the LEDs and can
be configured via sysfs. If unsure, say Y.
-if LEDS_TRIGGERS
-
comment "LED Triggers"
config LEDS_TRIGGER_TIMER
tristate "LED Timer Trigger"
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a programmable timer
via sysfs. Some LED hardware can be programmed to start
@@ -362,12 +393,14 @@
config LEDS_TRIGGER_IDE_DISK
bool "LED IDE Disk Trigger"
depends on IDE_GD_ATA
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by IDE disk activity.
If unsure, say Y.
config LEDS_TRIGGER_HEARTBEAT
tristate "LED Heartbeat Trigger"
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a CPU load average.
The flash frequency is a hyperbolic function of the 1-minute
@@ -376,6 +409,7 @@
config LEDS_TRIGGER_BACKLIGHT
tristate "LED backlight Trigger"
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled as a backlight device: they
turn off and on when the display is blanked and unblanked.
@@ -384,6 +418,7 @@
config LEDS_TRIGGER_GPIO
tristate "LED GPIO Trigger"
+ depends on LEDS_TRIGGERS
depends on GPIOLIB
help
This allows LEDs to be controlled by gpio events. It's good
@@ -396,6 +431,7 @@
config LEDS_TRIGGER_DEFAULT_ON
tristate "LED Default ON Trigger"
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be initialised in the ON state.
If unsure, say Y.
@@ -403,8 +439,4 @@
comment "iptables trigger is under Netfilter config (LED target)"
depends on LEDS_TRIGGERS
-endif # LEDS_TRIGGERS
-
-endif # LEDS_CLASS
-
endif # NEW_LEDS
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 3d7355f..fa51af1 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -102,6 +102,7 @@
config ADB_PMU_LED_IDE
bool "Use front LED as IDE LED by default"
depends on ADB_PMU_LED
+ depends on LEDS_CLASS
select LEDS_TRIGGERS
select LEDS_TRIGGER_IDE_DISK
help
diff --git a/drivers/media/radio/radio-si4713.c b/drivers/media/radio/radio-si4713.c
index 6a43578..03829e6 100644
--- a/drivers/media/radio/radio-si4713.c
+++ b/drivers/media/radio/radio-si4713.c
@@ -291,7 +291,7 @@
goto unregister_v4l2_dev;
}
- sd = v4l2_i2c_new_subdev_board(&rsdev->v4l2_dev, adapter, NULL,
+ sd = v4l2_i2c_new_subdev_board(&rsdev->v4l2_dev, adapter,
pdata->subdev_board_info, NULL);
if (!sd) {
dev_err(&pdev->dev, "Cannot get v4l2 subdevice\n");
diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c
index 0453816..01be89f 100644
--- a/drivers/media/video/au0828/au0828-cards.c
+++ b/drivers/media/video/au0828/au0828-cards.c
@@ -212,7 +212,7 @@
be abstracted out if we ever need to support a different
demod) */
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "au8522", 0x8e >> 1, NULL);
+ "au8522", 0x8e >> 1, NULL);
if (sd == NULL)
printk(KERN_ERR "analog subdev registration failed\n");
}
@@ -221,7 +221,7 @@
if (dev->board.tuner_type != TUNER_ABSENT) {
/* Load the tuner module, which does the attach */
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "tuner", dev->board.tuner_addr, NULL);
+ "tuner", dev->board.tuner_addr, NULL);
if (sd == NULL)
printk(KERN_ERR "tuner subdev registration fail\n");
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index 87d8b00..49efcf6 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -3529,7 +3529,7 @@
struct v4l2_subdev *sd;
sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "saa6588", 0, addrs);
+ &btv->c.i2c_adap, "saa6588", 0, addrs);
btv->has_saa6588 = (sd != NULL);
}
@@ -3554,7 +3554,7 @@
};
btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "msp3400", 0, addrs);
+ &btv->c.i2c_adap, "msp3400", 0, addrs);
if (btv->sd_msp34xx)
return;
goto no_audio;
@@ -3568,7 +3568,7 @@
};
if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "tda7432", 0, addrs))
+ &btv->c.i2c_adap, "tda7432", 0, addrs))
return;
goto no_audio;
}
@@ -3576,7 +3576,7 @@
case 3: {
/* The user specified that we should probe for tvaudio */
btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "tvaudio", 0, tvaudio_addrs());
+ &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
if (btv->sd_tvaudio)
return;
goto no_audio;
@@ -3596,11 +3596,11 @@
found is really something else (e.g. a tea6300). */
if (!bttv_tvcards[btv->c.type].no_msp34xx) {
btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "msp3400",
+ &btv->c.i2c_adap, "msp3400",
0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
} else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "msp3400",
+ &btv->c.i2c_adap, "msp3400",
0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
}
@@ -3616,13 +3616,13 @@
};
if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "tda7432", 0, addrs))
+ &btv->c.i2c_adap, "tda7432", 0, addrs))
return;
}
/* Now see if we can find one of the tvaudio devices. */
btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "tvaudio", 0, tvaudio_addrs());
+ &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
if (btv->sd_tvaudio)
return;
@@ -3646,13 +3646,13 @@
/* Load tuner module before issuing tuner config call! */
if (bttv_tvcards[btv->c.type].has_radio)
v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "tuner",
+ &btv->c.i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "tuner",
+ &btv->c.i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "tuner",
+ &btv->c.i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index 7bc3667..260c666 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -2066,8 +2066,7 @@
cam->sensor_addr = 0x42;
cam->sensor = v4l2_i2c_new_subdev_cfg(&cam->v4l2_dev, &cam->i2c_adapter,
- "ov7670", "ov7670", 0, &sensor_cfg, cam->sensor_addr,
- NULL);
+ "ov7670", 0, &sensor_cfg, cam->sensor_addr, NULL);
if (cam->sensor == NULL) {
ret = -ENODEV;
goto out_smbus;
diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c
index a09caf8..e71a026 100644
--- a/drivers/media/video/cx18/cx18-i2c.c
+++ b/drivers/media/video/cx18/cx18-i2c.c
@@ -122,15 +122,15 @@
if (hw == CX18_HW_TUNER) {
/* special tuner group handling */
sd = v4l2_i2c_new_subdev(&cx->v4l2_dev,
- adap, NULL, type, 0, cx->card_i2c->radio);
+ adap, type, 0, cx->card_i2c->radio);
if (sd != NULL)
sd->grp_id = hw;
sd = v4l2_i2c_new_subdev(&cx->v4l2_dev,
- adap, NULL, type, 0, cx->card_i2c->demod);
+ adap, type, 0, cx->card_i2c->demod);
if (sd != NULL)
sd->grp_id = hw;
sd = v4l2_i2c_new_subdev(&cx->v4l2_dev,
- adap, NULL, type, 0, cx->card_i2c->tv);
+ adap, type, 0, cx->card_i2c->tv);
if (sd != NULL)
sd->grp_id = hw;
return sd != NULL ? 0 : -1;
@@ -144,7 +144,7 @@
return -1;
/* It's an I2C device other than an analog tuner or IR chip */
- sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, adap, NULL, type, hw_addrs[idx],
+ sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, adap, type, hw_addrs[idx],
NULL);
if (sd != NULL)
sd->grp_id = hw;
diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c
index 56c2d81..2c78d18 100644
--- a/drivers/media/video/cx231xx/cx231xx-cards.c
+++ b/drivers/media/video/cx231xx/cx231xx-cards.c
@@ -560,7 +560,7 @@
if (dev->board.decoder == CX231XX_AVDECODER) {
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[0].i2c_adap,
- NULL, "cx25840", 0x88 >> 1, NULL);
+ "cx25840", 0x88 >> 1, NULL);
if (dev->sd_cx25840 == NULL)
cx231xx_info("cx25840 subdev registration failure\n");
cx25840_call(dev, core, load_fw);
@@ -571,7 +571,7 @@
if (dev->board.tuner_type != TUNER_ABSENT) {
dev->sd_tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[dev->board.tuner_i2c_master].i2c_adap,
- NULL, "tuner",
+ "tuner",
dev->tuner_addr, NULL);
if (dev->sd_tuner == NULL)
cx231xx_info("tuner subdev registration failure\n");
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index db05400..8861309 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -1247,7 +1247,7 @@
case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
- NULL, "cx25840", 0x88 >> 1, NULL);
+ "cx25840", 0x88 >> 1, NULL);
if (dev->sd_cx25840) {
dev->sd_cx25840->grp_id = CX23885_HW_AV_CORE;
v4l2_subdev_call(dev->sd_cx25840, core, load_fw);
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 3cc9f46..8b2fb8a 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -1507,10 +1507,10 @@
if (dev->tuner_addr)
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[1].i2c_adap,
- NULL, "tuner", dev->tuner_addr, NULL);
+ "tuner", dev->tuner_addr, NULL);
else
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_bus[1].i2c_adap, NULL,
+ &dev->i2c_bus[1].i2c_adap,
"tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_TV));
if (sd) {
struct tuner_setup tun_setup;
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index b26fcba..9b9e169 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -3515,19 +3515,18 @@
later code configures a tea5767.
*/
v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
- NULL, "tuner",
- 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
+ "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
if (has_demod)
v4l2_i2c_new_subdev(&core->v4l2_dev,
- &core->i2c_adap, NULL, "tuner",
+ &core->i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
if (core->board.tuner_addr == ADDR_UNSET) {
v4l2_i2c_new_subdev(&core->v4l2_dev,
- &core->i2c_adap, NULL, "tuner",
+ &core->i2c_adap, "tuner",
0, has_demod ? tv_addrs + 4 : tv_addrs);
} else {
v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
- NULL, "tuner", core->board.tuner_addr, NULL);
+ "tuner", core->board.tuner_addr, NULL);
}
}
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 88b5119..62cea95 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -1895,14 +1895,13 @@
if (core->board.audio_chip == V4L2_IDENT_WM8775)
v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
- NULL, "wm8775", 0x36 >> 1, NULL);
+ "wm8775", 0x36 >> 1, NULL);
if (core->board.audio_chip == V4L2_IDENT_TVAUDIO) {
/* This probes for a tda9874 as is used on some
Pixelview Ultra boards. */
- v4l2_i2c_new_subdev(&core->v4l2_dev,
- &core->i2c_adap,
- NULL, "tvaudio", 0, I2C_ADDRS(0xb0 >> 1));
+ v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
+ "tvaudio", 0, I2C_ADDRS(0xb0 >> 1));
}
switch (core->boardnr) {
diff --git a/drivers/media/video/davinci/vpfe_capture.c b/drivers/media/video/davinci/vpfe_capture.c
index d8e38cc..7333a9b 100644
--- a/drivers/media/video/davinci/vpfe_capture.c
+++ b/drivers/media/video/davinci/vpfe_capture.c
@@ -1986,7 +1986,6 @@
vpfe_dev->sd[i] =
v4l2_i2c_new_subdev_board(&vpfe_dev->v4l2_dev,
i2c_adap,
- NULL,
&sdinfo->board_info,
NULL);
if (vpfe_dev->sd[i]) {
diff --git a/drivers/media/video/davinci/vpif_capture.c b/drivers/media/video/davinci/vpif_capture.c
index 6ac6acd16..193abab 100644
--- a/drivers/media/video/davinci/vpif_capture.c
+++ b/drivers/media/video/davinci/vpif_capture.c
@@ -2013,7 +2013,6 @@
vpif_obj.sd[i] =
v4l2_i2c_new_subdev_board(&vpif_obj.v4l2_dev,
i2c_adap,
- NULL,
&subdevdata->board_info,
NULL);
diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c
index 685f6a6..412c65d5 100644
--- a/drivers/media/video/davinci/vpif_display.c
+++ b/drivers/media/video/davinci/vpif_display.c
@@ -1553,7 +1553,7 @@
for (i = 0; i < subdev_count; i++) {
vpif_obj.sd[i] = v4l2_i2c_new_subdev_board(&vpif_obj.v4l2_dev,
- i2c_adap, NULL,
+ i2c_adap,
&subdevdata[i].board_info,
NULL);
if (!vpif_obj.sd[i]) {
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 5485923..f7e9168 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -2554,39 +2554,39 @@
/* request some modules */
if (dev->board.has_msp34xx)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "msp3400", 0, msp3400_addrs);
+ "msp3400", 0, msp3400_addrs);
if (dev->board.decoder == EM28XX_SAA711X)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "saa7115_auto", 0, saa711x_addrs);
+ "saa7115_auto", 0, saa711x_addrs);
if (dev->board.decoder == EM28XX_TVP5150)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "tvp5150", 0, tvp5150_addrs);
+ "tvp5150", 0, tvp5150_addrs);
if (dev->em28xx_sensor == EM28XX_MT9V011) {
struct v4l2_subdev *sd;
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, NULL, "mt9v011", 0, mt9v011_addrs);
+ &dev->i2c_adap, "mt9v011", 0, mt9v011_addrs);
v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal);
}
if (dev->board.adecoder == EM28XX_TVAUDIO)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "tvaudio", dev->board.tvaudio_addr, NULL);
+ "tvaudio", dev->board.tvaudio_addr, NULL);
if (dev->board.tuner_type != TUNER_ABSENT) {
int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
if (dev->board.radio.type)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "tuner", dev->board.radio_addr, NULL);
+ "tuner", dev->board.radio_addr, NULL);
if (has_demod)
v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, NULL, "tuner",
+ &dev->i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
if (dev->tuner_addr == 0) {
enum v4l2_i2c_tuner_type type =
@@ -2594,14 +2594,14 @@
struct v4l2_subdev *sd;
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, NULL, "tuner",
+ &dev->i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(type));
if (sd)
dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
} else {
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "tuner", dev->tuner_addr, NULL);
+ "tuner", dev->tuner_addr, NULL);
}
}
diff --git a/drivers/media/video/fsl-viu.c b/drivers/media/video/fsl-viu.c
index 9a075d8..b8faff2 100644
--- a/drivers/media/video/fsl-viu.c
+++ b/drivers/media/video/fsl-viu.c
@@ -1486,7 +1486,7 @@
ad = i2c_get_adapter(0);
viu_dev->decoder = v4l2_i2c_new_subdev(&viu_dev->v4l2_dev, ad,
- NULL, "saa7113", VIU_VIDEO_DECODER_ADDR, NULL);
+ "saa7113", VIU_VIDEO_DECODER_ADDR, NULL);
viu_dev->vidq.timeout.function = viu_vid_timeout;
viu_dev->vidq.timeout.data = (unsigned long)viu_dev;
diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c
index 9e8039a..665191c 100644
--- a/drivers/media/video/ivtv/ivtv-i2c.c
+++ b/drivers/media/video/ivtv/ivtv-i2c.c
@@ -239,19 +239,16 @@
return -1;
if (hw == IVTV_HW_TUNER) {
/* special tuner handling */
- sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
- adap, NULL, type,
- 0, itv->card_i2c->radio);
+ sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, adap, type, 0,
+ itv->card_i2c->radio);
if (sd)
sd->grp_id = 1 << idx;
- sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
- adap, NULL, type,
- 0, itv->card_i2c->demod);
+ sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, adap, type, 0,
+ itv->card_i2c->demod);
if (sd)
sd->grp_id = 1 << idx;
- sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
- adap, NULL, type,
- 0, itv->card_i2c->tv);
+ sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, adap, type, 0,
+ itv->card_i2c->tv);
if (sd)
sd->grp_id = 1 << idx;
return sd ? 0 : -1;
@@ -267,17 +264,16 @@
/* It's an I2C device other than an analog tuner or IR chip */
if (hw == IVTV_HW_UPD64031A || hw == IVTV_HW_UPD6408X) {
sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
- adap, NULL, type, 0, I2C_ADDRS(hw_addrs[idx]));
+ adap, type, 0, I2C_ADDRS(hw_addrs[idx]));
} else if (hw == IVTV_HW_CX25840) {
struct cx25840_platform_data pdata;
pdata.pvr150_workaround = itv->pvr150_workaround;
sd = v4l2_i2c_new_subdev_cfg(&itv->v4l2_dev,
- adap, NULL, type, 0, &pdata, hw_addrs[idx],
- NULL);
+ adap, type, 0, &pdata, hw_addrs[idx], NULL);
} else {
sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
- adap, NULL, type, hw_addrs[idx], NULL);
+ adap, type, hw_addrs[idx], NULL);
}
if (sd)
sd->grp_id = 1 << idx;
diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c
index 94ba698d..4e8fd96 100644
--- a/drivers/media/video/mxb.c
+++ b/drivers/media/video/mxb.c
@@ -185,17 +185,17 @@
}
mxb->saa7111a = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
- NULL, "saa7111", I2C_SAA7111A, NULL);
+ "saa7111", I2C_SAA7111A, NULL);
mxb->tea6420_1 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
- NULL, "tea6420", I2C_TEA6420_1, NULL);
+ "tea6420", I2C_TEA6420_1, NULL);
mxb->tea6420_2 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
- NULL, "tea6420", I2C_TEA6420_2, NULL);
+ "tea6420", I2C_TEA6420_2, NULL);
mxb->tea6415c = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
- NULL, "tea6415c", I2C_TEA6415C, NULL);
+ "tea6415c", I2C_TEA6415C, NULL);
mxb->tda9840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
- NULL, "tda9840", I2C_TDA9840, NULL);
+ "tda9840", I2C_TDA9840, NULL);
mxb->tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
- NULL, "tuner", I2C_TUNER, NULL);
+ "tuner", I2C_TUNER, NULL);
/* check if all devices are present */
if (!mxb->tea6420_1 || !mxb->tea6420_2 || !mxb->tea6415c ||
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index bef2027..66ad516 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -2088,16 +2088,14 @@
" Setting up with specified i2c address 0x%x",
mid, i2caddr[0]);
sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap,
- NULL, fname,
- i2caddr[0], NULL);
+ fname, i2caddr[0], NULL);
} else {
pvr2_trace(PVR2_TRACE_INIT,
"Module ID %u:"
" Setting up with address probe list",
mid);
sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap,
- NULL, fname,
- 0, i2caddr);
+ fname, 0, i2caddr);
}
if (!sd) {
diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c
index e8f13d3..1b93207 100644
--- a/drivers/media/video/s5p-fimc/fimc-capture.c
+++ b/drivers/media/video/s5p-fimc/fimc-capture.c
@@ -44,7 +44,7 @@
return ERR_PTR(-ENOMEM);
sd = v4l2_i2c_new_subdev_board(&vid_cap->v4l2_dev, i2c_adap,
- MODULE_NAME, isp_info->board_info, NULL);
+ isp_info->board_info, NULL);
if (!sd) {
v4l2_err(&vid_cap->v4l2_dev, "failed to acquire subdev\n");
return NULL;
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 0911cb5..1d4d0a4 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -7551,22 +7551,22 @@
so we do not need to probe for a radio tuner device. */
if (dev->radio_type != UNSET)
v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, NULL, "tuner",
+ &dev->i2c_adap, "tuner",
dev->radio_addr, NULL);
if (has_demod)
v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, NULL, "tuner",
+ &dev->i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
if (dev->tuner_addr == ADDR_UNSET) {
enum v4l2_i2c_tuner_type type =
has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, NULL, "tuner",
+ &dev->i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(type));
} else {
v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, NULL, "tuner",
+ &dev->i2c_adap, "tuner",
dev->tuner_addr, NULL);
}
}
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index 764d7d2..756a278 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -991,7 +991,7 @@
if (card_is_empress(dev)) {
struct v4l2_subdev *sd =
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "saa6752hs",
+ "saa6752hs",
saa7134_boards[dev->board].empress_addr, NULL);
if (sd)
@@ -1002,7 +1002,7 @@
struct v4l2_subdev *sd;
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, NULL, "saa6588",
+ &dev->i2c_adap, "saa6588",
0, I2C_ADDRS(saa7134_boards[dev->board].rds_addr));
if (sd) {
printk(KERN_INFO "%s: found RDS decoder\n", dev->name);
diff --git a/drivers/media/video/sh_vou.c b/drivers/media/video/sh_vou.c
index 0f49061..4e5a8cf 100644
--- a/drivers/media/video/sh_vou.c
+++ b/drivers/media/video/sh_vou.c
@@ -1406,7 +1406,7 @@
goto ereset;
subdev = v4l2_i2c_new_subdev_board(&vou_dev->v4l2_dev, i2c_adap,
- NULL, vou_pdata->board_info, NULL);
+ vou_pdata->board_info, NULL);
if (!subdev) {
ret = -ENOMEM;
goto ei2cnd;
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 43848a7..335120c 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -896,7 +896,7 @@
icl->board_info->platform_data = icd;
subdev = v4l2_i2c_new_subdev_board(&ici->v4l2_dev, adap,
- NULL, icl->board_info, NULL);
+ icl->board_info, NULL);
if (!subdev)
goto ei2cnd;
diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c
index e3bbae2..81dd53b 100644
--- a/drivers/media/video/usbvision/usbvision-i2c.c
+++ b/drivers/media/video/usbvision/usbvision-i2c.c
@@ -251,7 +251,7 @@
hit-and-miss. */
mdelay(10);
v4l2_i2c_new_subdev(&usbvision->v4l2_dev,
- &usbvision->i2c_adap, NULL,
+ &usbvision->i2c_adap,
"saa7115_auto", 0, saa711x_addrs);
break;
}
@@ -261,14 +261,14 @@
struct tuner_setup tun_setup;
sd = v4l2_i2c_new_subdev(&usbvision->v4l2_dev,
- &usbvision->i2c_adap, NULL,
+ &usbvision->i2c_adap,
"tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
/* depending on whether we found a demod or not, select
the tuner type. */
type = sd ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
sd = v4l2_i2c_new_subdev(&usbvision->v4l2_dev,
- &usbvision->i2c_adap, NULL,
+ &usbvision->i2c_adap,
"tuner", 0, v4l2_i2c_tuner_addrs(type));
if (sd == NULL)
diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c
index 9294282..b5eb1f3 100644
--- a/drivers/media/video/v4l2-common.c
+++ b/drivers/media/video/v4l2-common.c
@@ -368,18 +368,15 @@
/* Load an i2c sub-device. */
struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
- struct i2c_adapter *adapter, const char *module_name,
- struct i2c_board_info *info, const unsigned short *probe_addrs)
+ struct i2c_adapter *adapter, struct i2c_board_info *info,
+ const unsigned short *probe_addrs)
{
struct v4l2_subdev *sd = NULL;
struct i2c_client *client;
BUG_ON(!v4l2_dev);
- if (module_name)
- request_module(module_name);
- else
- request_module(I2C_MODULE_PREFIX "%s", info->type);
+ request_module(I2C_MODULE_PREFIX "%s", info->type);
/* Create the i2c client */
if (info->addr == 0 && probe_addrs)
@@ -432,8 +429,7 @@
EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_board);
struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev,
- struct i2c_adapter *adapter,
- const char *module_name, const char *client_type,
+ struct i2c_adapter *adapter, const char *client_type,
int irq, void *platform_data,
u8 addr, const unsigned short *probe_addrs)
{
@@ -447,8 +443,7 @@
info.irq = irq;
info.platform_data = platform_data;
- return v4l2_i2c_new_subdev_board(v4l2_dev, adapter, module_name,
- &info, probe_addrs);
+ return v4l2_i2c_new_subdev_board(v4l2_dev, adapter, &info, probe_addrs);
}
EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_cfg);
diff --git a/drivers/media/video/via-camera.c b/drivers/media/video/via-camera.c
index 02a21bc..9eda7cc 100644
--- a/drivers/media/video/via-camera.c
+++ b/drivers/media/video/via-camera.c
@@ -1360,7 +1360,7 @@
*/
sensor_adapter = viafb_find_i2c_adapter(VIA_PORT_31);
cam->sensor = v4l2_i2c_new_subdev(&cam->v4l2_dev, sensor_adapter,
- "ov7670", "ov7670", 0x42 >> 1, NULL);
+ "ov7670", 0x42 >> 1, NULL);
if (cam->sensor == NULL) {
dev_err(&pdev->dev, "Unable to find the sensor!\n");
ret = -ENODEV;
diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c
index e5e005d..7e7eec4 100644
--- a/drivers/media/video/vino.c
+++ b/drivers/media/video/vino.c
@@ -4334,10 +4334,10 @@
vino_drvdata->decoder =
v4l2_i2c_new_subdev(&vino_drvdata->v4l2_dev, &vino_i2c_adapter,
- NULL, "saa7191", 0, I2C_ADDRS(0x45));
+ "saa7191", 0, I2C_ADDRS(0x45));
vino_drvdata->camera =
v4l2_i2c_new_subdev(&vino_drvdata->v4l2_dev, &vino_i2c_adapter,
- NULL, "indycam", 0, I2C_ADDRS(0x2b));
+ "indycam", 0, I2C_ADDRS(0x2b));
dprintk("init complete!\n");
diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c
index 7e6d624..e520abf 100644
--- a/drivers/media/video/zoran/zoran_card.c
+++ b/drivers/media/video/zoran/zoran_card.c
@@ -1343,13 +1343,12 @@
}
zr->decoder = v4l2_i2c_new_subdev(&zr->v4l2_dev,
- &zr->i2c_adapter, NULL, zr->card.i2c_decoder,
+ &zr->i2c_adapter, zr->card.i2c_decoder,
0, zr->card.addrs_decoder);
if (zr->card.i2c_encoder)
zr->encoder = v4l2_i2c_new_subdev(&zr->v4l2_dev,
- &zr->i2c_adapter,
- NULL, zr->card.i2c_encoder,
+ &zr->i2c_adapter, zr->card.i2c_encoder,
0, zr->card.addrs_encoder);
dprintk(2,
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index c2960ac..811775a 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -482,10 +482,17 @@
uint32_t data = 0;
struct ubi_vid_hdr vid_hdr;
- addr = (loff_t)pnum * ubi->peb_size + ubi->vid_hdr_aloffset;
+ /*
+ * It is important to first invalidate the EC header, and then the VID
+ * header. Otherwise a power cut may lead to valid EC header and
+ * invalid VID header, in which case UBI will treat this PEB as
+ * corrupted and will try to preserve it, and print scary warnings (see
+ * the header comment in scan.c for more information).
+ */
+ addr = (loff_t)pnum * ubi->peb_size;
err = ubi->mtd->write(ubi->mtd, addr, 4, &written, (void *)&data);
if (!err) {
- addr -= ubi->vid_hdr_aloffset;
+ addr += ubi->vid_hdr_aloffset;
err = ubi->mtd->write(ubi->mtd, addr, 4, &written,
(void *)&data);
if (!err)
@@ -494,18 +501,24 @@
/*
* We failed to write to the media. This was observed with Spansion
- * S29GL512N NOR flash. Most probably the eraseblock erasure was
- * interrupted at a very inappropriate moment, so it became unwritable.
- * In this case we probably anyway have garbage in this PEB.
+ * S29GL512N NOR flash. Most probably the previously eraseblock erasure
+ * was interrupted at a very inappropriate moment, so it became
+ * unwritable. In this case we probably anyway have garbage in this
+ * PEB.
*/
err1 = ubi_io_read_vid_hdr(ubi, pnum, &vid_hdr, 0);
- if (err1 == UBI_IO_BAD_HDR_EBADMSG || err1 == UBI_IO_BAD_HDR)
- /*
- * The VID header is corrupted, so we can safely erase this
- * PEB and not afraid that it will be treated as a valid PEB in
- * case of an unclean reboot.
- */
- return 0;
+ if (err1 == UBI_IO_BAD_HDR_EBADMSG || err1 == UBI_IO_BAD_HDR) {
+ struct ubi_ec_hdr ec_hdr;
+
+ err1 = ubi_io_read_ec_hdr(ubi, pnum, &ec_hdr, 0);
+ if (err1 == UBI_IO_BAD_HDR_EBADMSG || err1 == UBI_IO_BAD_HDR)
+ /*
+ * Both VID and EC headers are corrupted, so we can
+ * safely erase this PEB and not afraid that it will be
+ * treated as a valid PEB in case of an unclean reboot.
+ */
+ return 0;
+ }
/*
* The PEB contains a valid VID header, but we cannot invalidate it.
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 204345b..79ca304 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -953,6 +953,10 @@
* impossible to distinguish it from a PEB which just
* contains garbage because of a power cut during erase
* operation. So we just schedule this PEB for erasure.
+ *
+ * Besides, in case of NOR flash, we deliberatly
+ * corrupt both headers because NOR flash erasure is
+ * slow and can start from the end.
*/
err = 0;
else
diff --git a/drivers/net/mlx4/fw.c b/drivers/net/mlx4/fw.c
index b68eee2..7a7e18b 100644
--- a/drivers/net/mlx4/fw.c
+++ b/drivers/net/mlx4/fw.c
@@ -289,6 +289,10 @@
MLX4_GET(field, outbox, QUERY_DEV_CAP_LOG_BF_REG_SZ_OFFSET);
dev_cap->bf_reg_size = 1 << (field & 0x1f);
MLX4_GET(field, outbox, QUERY_DEV_CAP_LOG_MAX_BF_REGS_PER_PAGE_OFFSET);
+ if ((1 << (field & 0x3f)) > (PAGE_SIZE / dev_cap->bf_reg_size)) {
+ mlx4_warn(dev, "firmware bug: log2 # of blue flame regs is invalid (%d), forcing 3\n", field & 0x1f);
+ field = 3;
+ }
dev_cap->bf_regs_per_page = 1 << (field & 0x3f);
mlx4_dbg(dev, "BlueFlame available (reg size %d, regs/page %d)\n",
dev_cap->bf_reg_size, dev_cap->bf_regs_per_page);
diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c
index cf05504..24297b2 100644
--- a/drivers/net/wan/x25_asy.c
+++ b/drivers/net/wan/x25_asy.c
@@ -577,7 +577,7 @@
if (err)
return err;
/* Done. We have linked the TTY line to a channel. */
- return sl->dev->base_addr;
+ return 0;
}
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index f1d10c9..ba521f0 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -911,7 +911,7 @@
}
/**
- * set_consumer_device_supply: Bind a regulator to a symbolic supply
+ * set_consumer_device_supply - Bind a regulator to a symbolic supply
* @rdev: regulator source
* @consumer_dev: device the supply applies to
* @consumer_dev_name: dev_name() string for device supply applies to
@@ -1052,7 +1052,6 @@
printk(KERN_WARNING
"%s: could not add device link %s err %d\n",
__func__, dev->kobj.name, err);
- device_remove_file(dev, ®ulator->dev_attr);
goto link_name_err;
}
}
@@ -1268,13 +1267,17 @@
{
int ret, delay;
- /* do we need to enable the supply regulator first */
- if (rdev->supply) {
- ret = _regulator_enable(rdev->supply);
- if (ret < 0) {
- printk(KERN_ERR "%s: failed to enable %s: %d\n",
- __func__, rdev_get_name(rdev), ret);
- return ret;
+ if (rdev->use_count == 0) {
+ /* do we need to enable the supply regulator first */
+ if (rdev->supply) {
+ mutex_lock(&rdev->supply->mutex);
+ ret = _regulator_enable(rdev->supply);
+ mutex_unlock(&rdev->supply->mutex);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: failed to enable %s: %d\n",
+ __func__, rdev_get_name(rdev), ret);
+ return ret;
+ }
}
}
@@ -1313,10 +1316,12 @@
if (ret < 0)
return ret;
- if (delay >= 1000)
+ if (delay >= 1000) {
mdelay(delay / 1000);
- else if (delay)
+ udelay(delay % 1000);
+ } else if (delay) {
udelay(delay);
+ }
} else if (ret < 0) {
printk(KERN_ERR "%s: is_enabled() failed for %s: %d\n",
@@ -1359,6 +1364,7 @@
struct regulator_dev **supply_rdev_ptr)
{
int ret = 0;
+ *supply_rdev_ptr = NULL;
if (WARN(rdev->use_count <= 0,
"unbalanced disables for %s\n",
@@ -2346,6 +2352,7 @@
if (init_data->supply_regulator && init_data->supply_regulator_dev) {
dev_err(dev,
"Supply regulator specified by both name and dev\n");
+ ret = -EINVAL;
goto scrub;
}
@@ -2364,6 +2371,7 @@
if (!found) {
dev_err(dev, "Failed to find supply %s\n",
init_data->supply_regulator);
+ ret = -ENODEV;
goto scrub;
}
diff --git a/drivers/regulator/mc13783-regulator.c b/drivers/regulator/mc13783-regulator.c
index 4597d50..ecd99f5 100644
--- a/drivers/regulator/mc13783-regulator.c
+++ b/drivers/regulator/mc13783-regulator.c
@@ -465,8 +465,8 @@
.get_voltage = mc13783_fixed_regulator_get_voltage,
};
-int mc13783_powermisc_rmw(struct mc13783_regulator_priv *priv, u32 mask,
- u32 val)
+static int mc13783_powermisc_rmw(struct mc13783_regulator_priv *priv, u32 mask,
+ u32 val)
{
struct mc13783 *mc13783 = priv->mc13783;
int ret;
diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index 7e5892e..a57262a 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -219,12 +219,12 @@
return -EACCES;
status = twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
- message >> 8, 0x15 /* PB_WORD_MSB */ );
- if (status >= 0)
+ message >> 8, TWL4030_PM_MASTER_PB_WORD_MSB);
+ if (status < 0)
return status;
return twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
- message, 0x16 /* PB_WORD_LSB */ );
+ message & 0xff, TWL4030_PM_MASTER_PB_WORD_LSB);
}
/*----------------------------------------------------------------------*/
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 4d8e14b..09a5508 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2872,7 +2872,7 @@
.device = uart_console_device,
.setup = serial8250_console_setup,
.early_setup = serial8250_console_early_setup,
- .flags = CON_PRINTBUFFER,
+ .flags = CON_PRINTBUFFER | CON_ANYTIME,
.index = -1,
.data = &serial8250_reg,
};
diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c
index 5fc699e..d40010a 100644
--- a/drivers/serial/mfd.c
+++ b/drivers/serial/mfd.c
@@ -900,8 +900,7 @@
unsigned char cval, fcr = 0;
unsigned long flags;
unsigned int baud, quot;
- u32 mul = 0x3600;
- u32 ps = 0x10;
+ u32 ps, mul;
switch (termios->c_cflag & CSIZE) {
case CS5:
@@ -943,31 +942,24 @@
baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
quot = 1;
+ ps = 0x10;
+ mul = 0x3600;
switch (baud) {
case 3500000:
mul = 0x3345;
ps = 0xC;
break;
- case 3000000:
- mul = 0x2EE0;
- break;
- case 2500000:
- mul = 0x2710;
- break;
- case 2000000:
- mul = 0x1F40;
- break;
case 1843200:
mul = 0x2400;
break;
+ case 3000000:
+ case 2500000:
+ case 2000000:
case 1500000:
- mul = 0x1770;
- break;
case 1000000:
- mul = 0xFA0;
- break;
case 500000:
- mul = 0x7D0;
+ /* mul/ps/quot = 0x9C4/0x10/0x1 will make a 500000 bps */
+ mul = baud / 500000 * 0x9C4;
break;
default:
/* Use uart_get_divisor to get quot for other baud rates */
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index 154529a..a067046 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -352,8 +352,12 @@
xfer->tx_dma = xfer->rx_dma = INVALID_DMA_ADDRESS;
if (xfer->tx_buf) {
+ /* tx_buf is a const void* where we need a void * for the dma
+ * mapping */
+ void *nonconst_tx = (void *)xfer->tx_buf;
+
xfer->tx_dma = dma_map_single(dev,
- (void *) xfer->tx_buf, xfer->len,
+ nonconst_tx, xfer->len,
DMA_TO_DEVICE);
if (dma_mapping_error(dev, xfer->tx_dma))
return -ENOMEM;
diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c
index 8c95d8c..016c6f7 100644
--- a/drivers/staging/asus_oled/asus_oled.c
+++ b/drivers/staging/asus_oled/asus_oled.c
@@ -620,13 +620,13 @@
#define ASUS_OLED_DEVICE_ATTR(_file) dev_attr_asus_oled_##_file
-static DEVICE_ATTR(asus_oled_enabled, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(asus_oled_enabled, S_IWUSR | S_IRUGO,
get_enabled, set_enabled);
-static DEVICE_ATTR(asus_oled_picture, S_IWUGO , NULL, set_picture);
+static DEVICE_ATTR(asus_oled_picture, S_IWUSR , NULL, set_picture);
-static DEVICE_ATTR(enabled, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(enabled, S_IWUSR | S_IRUGO,
class_get_enabled, class_set_enabled);
-static DEVICE_ATTR(picture, S_IWUGO, NULL, class_set_picture);
+static DEVICE_ATTR(picture, S_IWUSR, NULL, class_set_picture);
static int asus_oled_probe(struct usb_interface *interface,
const struct usb_device_id *id)
diff --git a/drivers/staging/batman-adv/hard-interface.c b/drivers/staging/batman-adv/hard-interface.c
index b68a7e5..d85de82 100644
--- a/drivers/staging/batman-adv/hard-interface.c
+++ b/drivers/staging/batman-adv/hard-interface.c
@@ -463,9 +463,6 @@
return;
batman_if->if_status = IF_TO_BE_REMOVED;
-
- /* caller must take if_list_lock */
- list_del_rcu(&batman_if->list);
synchronize_rcu();
sysfs_del_hardif(&batman_if->hardif_obj);
hardif_put(batman_if);
@@ -474,13 +471,21 @@
void hardif_remove_interfaces(void)
{
struct batman_if *batman_if, *batman_if_tmp;
+ struct list_head if_queue;
- rtnl_lock();
+ INIT_LIST_HEAD(&if_queue);
+
spin_lock(&if_list_lock);
list_for_each_entry_safe(batman_if, batman_if_tmp, &if_list, list) {
- hardif_remove_interface(batman_if);
+ list_del_rcu(&batman_if->list);
+ list_add_tail(&batman_if->list, &if_queue);
}
spin_unlock(&if_list_lock);
+
+ rtnl_lock();
+ list_for_each_entry_safe(batman_if, batman_if_tmp, &if_queue, list) {
+ hardif_remove_interface(batman_if);
+ }
rtnl_unlock();
}
@@ -507,8 +512,10 @@
break;
case NETDEV_UNREGISTER:
spin_lock(&if_list_lock);
- hardif_remove_interface(batman_if);
+ list_del_rcu(&batman_if->list);
spin_unlock(&if_list_lock);
+
+ hardif_remove_interface(batman_if);
break;
case NETDEV_CHANGEMTU:
if (batman_if->soft_iface)
diff --git a/drivers/staging/batman-adv/soft-interface.c b/drivers/staging/batman-adv/soft-interface.c
index 3904db9..0e99618 100644
--- a/drivers/staging/batman-adv/soft-interface.c
+++ b/drivers/staging/batman-adv/soft-interface.c
@@ -194,14 +194,15 @@
struct bat_priv *priv = netdev_priv(soft_iface);
/* check if enough space is available for pulling, and pull */
- if (!pskb_may_pull(skb, hdr_size)) {
- kfree_skb(skb);
- return;
- }
+ if (!pskb_may_pull(skb, hdr_size))
+ goto dropped;
+
skb_pull_rcsum(skb, hdr_size);
/* skb_set_mac_header(skb, -sizeof(struct ethhdr));*/
/* skb->dev & skb->pkt_type are set here */
+ if (unlikely(!pskb_may_pull(skb, ETH_HLEN)))
+ goto dropped;
skb->protocol = eth_type_trans(skb, soft_iface);
/* should not be neccesary anymore as we use skb_pull_rcsum()
@@ -216,6 +217,11 @@
soft_iface->last_rx = jiffies;
netif_rx(skb);
+ return;
+
+dropped:
+ kfree_skb(skb);
+ return;
}
#ifdef HAVE_NET_DEVICE_OPS
diff --git a/drivers/staging/brcm80211/README b/drivers/staging/brcm80211/README
index c8f1cf1..a27bb0b 100644
--- a/drivers/staging/brcm80211/README
+++ b/drivers/staging/brcm80211/README
@@ -88,7 +88,9 @@
Contact Info:
=============
-Brett Rudley brudley@broadcom.com
-Henry Ptasinski henryp@broadcom.com
-Dowan Kim dowan@broadcom.com
+Brett Rudley brudley@broadcom.com
+Henry Ptasinski henryp@broadcom.com
+Dowan Kim dowan@broadcom.com
+Roland Vossen rvossen@broadcom.com
+Arend van Spriel arend@broadcom.com
diff --git a/drivers/staging/brcm80211/TODO b/drivers/staging/brcm80211/TODO
index dbf9041..24ebadb 100644
--- a/drivers/staging/brcm80211/TODO
+++ b/drivers/staging/brcm80211/TODO
@@ -46,4 +46,6 @@
Brett Rudley <brudley@broadcom.com>
Henry Ptasinski <henryp@broadcom.com>
Dowan Kim <dowan@broadcom.com>
+Roland Vossen <rvossen@broadcom.com>
+Arend van Spriel <arend@broadcom.com>
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index 1f177a6..de784ff 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -2295,8 +2295,8 @@
usbduxsub_tmp->inBuffer = NULL;
kfree(usbduxsub_tmp->insnBuffer);
usbduxsub_tmp->insnBuffer = NULL;
- kfree(usbduxsub_tmp->inBuffer);
- usbduxsub_tmp->inBuffer = NULL;
+ kfree(usbduxsub_tmp->outBuffer);
+ usbduxsub_tmp->outBuffer = NULL;
kfree(usbduxsub_tmp->dac_commands);
usbduxsub_tmp->dac_commands = NULL;
kfree(usbduxsub_tmp->dux_commands);
diff --git a/drivers/staging/easycap/easycap.h b/drivers/staging/easycap/easycap.h
index 25961c2..884263b 100644
--- a/drivers/staging/easycap/easycap.h
+++ b/drivers/staging/easycap/easycap.h
@@ -75,6 +75,7 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/module.h>
#include <linux/kref.h>
#include <linux/usb.h>
diff --git a/drivers/staging/frontier/tranzport.c b/drivers/staging/frontier/tranzport.c
index a145a15..8894ab1 100644
--- a/drivers/staging/frontier/tranzport.c
+++ b/drivers/staging/frontier/tranzport.c
@@ -204,7 +204,7 @@
t->value = temp; \
return count; \
} \
- static DEVICE_ATTR(value, S_IWUGO | S_IRUGO, show_##value, set_##value);
+ static DEVICE_ATTR(value, S_IWUSR | S_IRUGO, show_##value, set_##value);
show_int(enable);
show_int(offline);
diff --git a/drivers/staging/go7007/go7007-driver.c b/drivers/staging/go7007/go7007-driver.c
index b3f42f3..48d4e48 100644
--- a/drivers/staging/go7007/go7007-driver.c
+++ b/drivers/staging/go7007/go7007-driver.c
@@ -199,7 +199,7 @@
struct go7007 *go = i2c_get_adapdata(adapter);
struct v4l2_device *v4l2_dev = &go->v4l2_dev;
- if (v4l2_i2c_new_subdev(v4l2_dev, adapter, NULL, type, addr, NULL))
+ if (v4l2_i2c_new_subdev(v4l2_dev, adapter, type, addr, NULL))
return 0;
printk(KERN_INFO "go7007: probing for module i2c:%s failed\n", type);
diff --git a/drivers/staging/iio/accel/adis16220_core.c b/drivers/staging/iio/accel/adis16220_core.c
index c86d149..1c1e98a 100644
--- a/drivers/staging/iio/accel/adis16220_core.c
+++ b/drivers/staging/iio/accel/adis16220_core.c
@@ -507,7 +507,7 @@
adis16220_write_reset, 0);
#define IIO_DEV_ATTR_CAPTURE(_store) \
- IIO_DEVICE_ATTR(capture, S_IWUGO, NULL, _store, 0)
+ IIO_DEVICE_ATTR(capture, S_IWUSR, NULL, _store, 0)
static IIO_DEV_ATTR_CAPTURE(adis16220_write_capture);
diff --git a/drivers/staging/intel_sst/intel_sst_stream_encoded.c b/drivers/staging/intel_sst/intel_sst_stream_encoded.c
index fbae39f..5c45560 100644
--- a/drivers/staging/intel_sst/intel_sst_stream_encoded.c
+++ b/drivers/staging/intel_sst/intel_sst_stream_encoded.c
@@ -1269,7 +1269,7 @@
dbufs->output_bytes_produced = total_output;
str_info->status = str_info->prev;
str_info->prev = STREAM_DECODE;
- str_info->decode_ibuf = NULL;
kfree(str_info->decode_ibuf);
+ str_info->decode_ibuf = NULL;
return retval;
}
diff --git a/drivers/staging/line6/control.c b/drivers/staging/line6/control.c
index 040e25c..67e23b6 100644
--- a/drivers/staging/line6/control.c
+++ b/drivers/staging/line6/control.c
@@ -266,210 +266,210 @@
VARIAX_PARAM_R(float, mix1);
VARIAX_PARAM_R(int, pickup_wiring);
-static DEVICE_ATTR(tweak, S_IWUGO | S_IRUGO, pod_get_tweak, pod_set_tweak);
-static DEVICE_ATTR(wah_position, S_IWUGO | S_IRUGO, pod_get_wah_position,
+static DEVICE_ATTR(tweak, S_IWUSR | S_IRUGO, pod_get_tweak, pod_set_tweak);
+static DEVICE_ATTR(wah_position, S_IWUSR | S_IRUGO, pod_get_wah_position,
pod_set_wah_position);
-static DEVICE_ATTR(compression_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(compression_gain, S_IWUSR | S_IRUGO,
pod_get_compression_gain, pod_set_compression_gain);
-static DEVICE_ATTR(vol_pedal_position, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(vol_pedal_position, S_IWUSR | S_IRUGO,
pod_get_vol_pedal_position, pod_set_vol_pedal_position);
-static DEVICE_ATTR(compression_threshold, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(compression_threshold, S_IWUSR | S_IRUGO,
pod_get_compression_threshold,
pod_set_compression_threshold);
-static DEVICE_ATTR(pan, S_IWUGO | S_IRUGO, pod_get_pan, pod_set_pan);
-static DEVICE_ATTR(amp_model_setup, S_IWUGO | S_IRUGO, pod_get_amp_model_setup,
+static DEVICE_ATTR(pan, S_IWUSR | S_IRUGO, pod_get_pan, pod_set_pan);
+static DEVICE_ATTR(amp_model_setup, S_IWUSR | S_IRUGO, pod_get_amp_model_setup,
pod_set_amp_model_setup);
-static DEVICE_ATTR(amp_model, S_IWUGO | S_IRUGO, pod_get_amp_model,
+static DEVICE_ATTR(amp_model, S_IWUSR | S_IRUGO, pod_get_amp_model,
pod_set_amp_model);
-static DEVICE_ATTR(drive, S_IWUGO | S_IRUGO, pod_get_drive, pod_set_drive);
-static DEVICE_ATTR(bass, S_IWUGO | S_IRUGO, pod_get_bass, pod_set_bass);
-static DEVICE_ATTR(mid, S_IWUGO | S_IRUGO, pod_get_mid, pod_set_mid);
-static DEVICE_ATTR(lowmid, S_IWUGO | S_IRUGO, pod_get_lowmid, pod_set_lowmid);
-static DEVICE_ATTR(treble, S_IWUGO | S_IRUGO, pod_get_treble, pod_set_treble);
-static DEVICE_ATTR(highmid, S_IWUGO | S_IRUGO, pod_get_highmid,
+static DEVICE_ATTR(drive, S_IWUSR | S_IRUGO, pod_get_drive, pod_set_drive);
+static DEVICE_ATTR(bass, S_IWUSR | S_IRUGO, pod_get_bass, pod_set_bass);
+static DEVICE_ATTR(mid, S_IWUSR | S_IRUGO, pod_get_mid, pod_set_mid);
+static DEVICE_ATTR(lowmid, S_IWUSR | S_IRUGO, pod_get_lowmid, pod_set_lowmid);
+static DEVICE_ATTR(treble, S_IWUSR | S_IRUGO, pod_get_treble, pod_set_treble);
+static DEVICE_ATTR(highmid, S_IWUSR | S_IRUGO, pod_get_highmid,
pod_set_highmid);
-static DEVICE_ATTR(chan_vol, S_IWUGO | S_IRUGO, pod_get_chan_vol,
+static DEVICE_ATTR(chan_vol, S_IWUSR | S_IRUGO, pod_get_chan_vol,
pod_set_chan_vol);
-static DEVICE_ATTR(reverb_mix, S_IWUGO | S_IRUGO, pod_get_reverb_mix,
+static DEVICE_ATTR(reverb_mix, S_IWUSR | S_IRUGO, pod_get_reverb_mix,
pod_set_reverb_mix);
-static DEVICE_ATTR(effect_setup, S_IWUGO | S_IRUGO, pod_get_effect_setup,
+static DEVICE_ATTR(effect_setup, S_IWUSR | S_IRUGO, pod_get_effect_setup,
pod_set_effect_setup);
-static DEVICE_ATTR(band_1_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_1_frequency, S_IWUSR | S_IRUGO,
pod_get_band_1_frequency, pod_set_band_1_frequency);
-static DEVICE_ATTR(presence, S_IWUGO | S_IRUGO, pod_get_presence,
+static DEVICE_ATTR(presence, S_IWUSR | S_IRUGO, pod_get_presence,
pod_set_presence);
-static DEVICE_ATTR2(treble__bass, treble, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(treble__bass, treble, S_IWUSR | S_IRUGO,
pod_get_treble__bass, pod_set_treble__bass);
-static DEVICE_ATTR(noise_gate_enable, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(noise_gate_enable, S_IWUSR | S_IRUGO,
pod_get_noise_gate_enable, pod_set_noise_gate_enable);
-static DEVICE_ATTR(gate_threshold, S_IWUGO | S_IRUGO, pod_get_gate_threshold,
+static DEVICE_ATTR(gate_threshold, S_IWUSR | S_IRUGO, pod_get_gate_threshold,
pod_set_gate_threshold);
-static DEVICE_ATTR(gate_decay_time, S_IWUGO | S_IRUGO, pod_get_gate_decay_time,
+static DEVICE_ATTR(gate_decay_time, S_IWUSR | S_IRUGO, pod_get_gate_decay_time,
pod_set_gate_decay_time);
-static DEVICE_ATTR(stomp_enable, S_IWUGO | S_IRUGO, pod_get_stomp_enable,
+static DEVICE_ATTR(stomp_enable, S_IWUSR | S_IRUGO, pod_get_stomp_enable,
pod_set_stomp_enable);
-static DEVICE_ATTR(comp_enable, S_IWUGO | S_IRUGO, pod_get_comp_enable,
+static DEVICE_ATTR(comp_enable, S_IWUSR | S_IRUGO, pod_get_comp_enable,
pod_set_comp_enable);
-static DEVICE_ATTR(stomp_time, S_IWUGO | S_IRUGO, pod_get_stomp_time,
+static DEVICE_ATTR(stomp_time, S_IWUSR | S_IRUGO, pod_get_stomp_time,
pod_set_stomp_time);
-static DEVICE_ATTR(delay_enable, S_IWUGO | S_IRUGO, pod_get_delay_enable,
+static DEVICE_ATTR(delay_enable, S_IWUSR | S_IRUGO, pod_get_delay_enable,
pod_set_delay_enable);
-static DEVICE_ATTR(mod_param_1, S_IWUGO | S_IRUGO, pod_get_mod_param_1,
+static DEVICE_ATTR(mod_param_1, S_IWUSR | S_IRUGO, pod_get_mod_param_1,
pod_set_mod_param_1);
-static DEVICE_ATTR(delay_param_1, S_IWUGO | S_IRUGO, pod_get_delay_param_1,
+static DEVICE_ATTR(delay_param_1, S_IWUSR | S_IRUGO, pod_get_delay_param_1,
pod_set_delay_param_1);
-static DEVICE_ATTR(delay_param_1_note_value, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(delay_param_1_note_value, S_IWUSR | S_IRUGO,
pod_get_delay_param_1_note_value,
pod_set_delay_param_1_note_value);
-static DEVICE_ATTR2(band_2_frequency__bass, band_2_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_2_frequency__bass, band_2_frequency, S_IWUSR | S_IRUGO,
pod_get_band_2_frequency__bass,
pod_set_band_2_frequency__bass);
-static DEVICE_ATTR(delay_param_2, S_IWUGO | S_IRUGO, pod_get_delay_param_2,
+static DEVICE_ATTR(delay_param_2, S_IWUSR | S_IRUGO, pod_get_delay_param_2,
pod_set_delay_param_2);
-static DEVICE_ATTR(delay_volume_mix, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(delay_volume_mix, S_IWUSR | S_IRUGO,
pod_get_delay_volume_mix, pod_set_delay_volume_mix);
-static DEVICE_ATTR(delay_param_3, S_IWUGO | S_IRUGO, pod_get_delay_param_3,
+static DEVICE_ATTR(delay_param_3, S_IWUSR | S_IRUGO, pod_get_delay_param_3,
pod_set_delay_param_3);
-static DEVICE_ATTR(reverb_enable, S_IWUGO | S_IRUGO, pod_get_reverb_enable,
+static DEVICE_ATTR(reverb_enable, S_IWUSR | S_IRUGO, pod_get_reverb_enable,
pod_set_reverb_enable);
-static DEVICE_ATTR(reverb_type, S_IWUGO | S_IRUGO, pod_get_reverb_type,
+static DEVICE_ATTR(reverb_type, S_IWUSR | S_IRUGO, pod_get_reverb_type,
pod_set_reverb_type);
-static DEVICE_ATTR(reverb_decay, S_IWUGO | S_IRUGO, pod_get_reverb_decay,
+static DEVICE_ATTR(reverb_decay, S_IWUSR | S_IRUGO, pod_get_reverb_decay,
pod_set_reverb_decay);
-static DEVICE_ATTR(reverb_tone, S_IWUGO | S_IRUGO, pod_get_reverb_tone,
+static DEVICE_ATTR(reverb_tone, S_IWUSR | S_IRUGO, pod_get_reverb_tone,
pod_set_reverb_tone);
-static DEVICE_ATTR(reverb_pre_delay, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(reverb_pre_delay, S_IWUSR | S_IRUGO,
pod_get_reverb_pre_delay, pod_set_reverb_pre_delay);
-static DEVICE_ATTR(reverb_pre_post, S_IWUGO | S_IRUGO, pod_get_reverb_pre_post,
+static DEVICE_ATTR(reverb_pre_post, S_IWUSR | S_IRUGO, pod_get_reverb_pre_post,
pod_set_reverb_pre_post);
-static DEVICE_ATTR(band_2_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_2_frequency, S_IWUSR | S_IRUGO,
pod_get_band_2_frequency, pod_set_band_2_frequency);
-static DEVICE_ATTR2(band_3_frequency__bass, band_3_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_3_frequency__bass, band_3_frequency, S_IWUSR | S_IRUGO,
pod_get_band_3_frequency__bass,
pod_set_band_3_frequency__bass);
-static DEVICE_ATTR(wah_enable, S_IWUGO | S_IRUGO, pod_get_wah_enable,
+static DEVICE_ATTR(wah_enable, S_IWUSR | S_IRUGO, pod_get_wah_enable,
pod_set_wah_enable);
-static DEVICE_ATTR(modulation_lo_cut, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(modulation_lo_cut, S_IWUSR | S_IRUGO,
pod_get_modulation_lo_cut, pod_set_modulation_lo_cut);
-static DEVICE_ATTR(delay_reverb_lo_cut, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(delay_reverb_lo_cut, S_IWUSR | S_IRUGO,
pod_get_delay_reverb_lo_cut, pod_set_delay_reverb_lo_cut);
-static DEVICE_ATTR(volume_pedal_minimum, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(volume_pedal_minimum, S_IWUSR | S_IRUGO,
pod_get_volume_pedal_minimum, pod_set_volume_pedal_minimum);
-static DEVICE_ATTR(eq_pre_post, S_IWUGO | S_IRUGO, pod_get_eq_pre_post,
+static DEVICE_ATTR(eq_pre_post, S_IWUSR | S_IRUGO, pod_get_eq_pre_post,
pod_set_eq_pre_post);
-static DEVICE_ATTR(volume_pre_post, S_IWUGO | S_IRUGO, pod_get_volume_pre_post,
+static DEVICE_ATTR(volume_pre_post, S_IWUSR | S_IRUGO, pod_get_volume_pre_post,
pod_set_volume_pre_post);
-static DEVICE_ATTR(di_model, S_IWUGO | S_IRUGO, pod_get_di_model,
+static DEVICE_ATTR(di_model, S_IWUSR | S_IRUGO, pod_get_di_model,
pod_set_di_model);
-static DEVICE_ATTR(di_delay, S_IWUGO | S_IRUGO, pod_get_di_delay,
+static DEVICE_ATTR(di_delay, S_IWUSR | S_IRUGO, pod_get_di_delay,
pod_set_di_delay);
-static DEVICE_ATTR(mod_enable, S_IWUGO | S_IRUGO, pod_get_mod_enable,
+static DEVICE_ATTR(mod_enable, S_IWUSR | S_IRUGO, pod_get_mod_enable,
pod_set_mod_enable);
-static DEVICE_ATTR(mod_param_1_note_value, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(mod_param_1_note_value, S_IWUSR | S_IRUGO,
pod_get_mod_param_1_note_value,
pod_set_mod_param_1_note_value);
-static DEVICE_ATTR(mod_param_2, S_IWUGO | S_IRUGO, pod_get_mod_param_2,
+static DEVICE_ATTR(mod_param_2, S_IWUSR | S_IRUGO, pod_get_mod_param_2,
pod_set_mod_param_2);
-static DEVICE_ATTR(mod_param_3, S_IWUGO | S_IRUGO, pod_get_mod_param_3,
+static DEVICE_ATTR(mod_param_3, S_IWUSR | S_IRUGO, pod_get_mod_param_3,
pod_set_mod_param_3);
-static DEVICE_ATTR(mod_param_4, S_IWUGO | S_IRUGO, pod_get_mod_param_4,
+static DEVICE_ATTR(mod_param_4, S_IWUSR | S_IRUGO, pod_get_mod_param_4,
pod_set_mod_param_4);
-static DEVICE_ATTR(mod_param_5, S_IWUGO | S_IRUGO, pod_get_mod_param_5,
+static DEVICE_ATTR(mod_param_5, S_IWUSR | S_IRUGO, pod_get_mod_param_5,
pod_set_mod_param_5);
-static DEVICE_ATTR(mod_volume_mix, S_IWUGO | S_IRUGO, pod_get_mod_volume_mix,
+static DEVICE_ATTR(mod_volume_mix, S_IWUSR | S_IRUGO, pod_get_mod_volume_mix,
pod_set_mod_volume_mix);
-static DEVICE_ATTR(mod_pre_post, S_IWUGO | S_IRUGO, pod_get_mod_pre_post,
+static DEVICE_ATTR(mod_pre_post, S_IWUSR | S_IRUGO, pod_get_mod_pre_post,
pod_set_mod_pre_post);
-static DEVICE_ATTR(modulation_model, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(modulation_model, S_IWUSR | S_IRUGO,
pod_get_modulation_model, pod_set_modulation_model);
-static DEVICE_ATTR(band_3_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_3_frequency, S_IWUSR | S_IRUGO,
pod_get_band_3_frequency, pod_set_band_3_frequency);
-static DEVICE_ATTR2(band_4_frequency__bass, band_4_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_4_frequency__bass, band_4_frequency, S_IWUSR | S_IRUGO,
pod_get_band_4_frequency__bass,
pod_set_band_4_frequency__bass);
-static DEVICE_ATTR(mod_param_1_double_precision, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(mod_param_1_double_precision, S_IWUSR | S_IRUGO,
pod_get_mod_param_1_double_precision,
pod_set_mod_param_1_double_precision);
-static DEVICE_ATTR(delay_param_1_double_precision, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(delay_param_1_double_precision, S_IWUSR | S_IRUGO,
pod_get_delay_param_1_double_precision,
pod_set_delay_param_1_double_precision);
-static DEVICE_ATTR(eq_enable, S_IWUGO | S_IRUGO, pod_get_eq_enable,
+static DEVICE_ATTR(eq_enable, S_IWUSR | S_IRUGO, pod_get_eq_enable,
pod_set_eq_enable);
-static DEVICE_ATTR(tap, S_IWUGO | S_IRUGO, pod_get_tap, pod_set_tap);
-static DEVICE_ATTR(volume_tweak_pedal_assign, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(tap, S_IWUSR | S_IRUGO, pod_get_tap, pod_set_tap);
+static DEVICE_ATTR(volume_tweak_pedal_assign, S_IWUSR | S_IRUGO,
pod_get_volume_tweak_pedal_assign,
pod_set_volume_tweak_pedal_assign);
-static DEVICE_ATTR(band_5_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_5_frequency, S_IWUSR | S_IRUGO,
pod_get_band_5_frequency, pod_set_band_5_frequency);
-static DEVICE_ATTR(tuner, S_IWUGO | S_IRUGO, pod_get_tuner, pod_set_tuner);
-static DEVICE_ATTR(mic_selection, S_IWUGO | S_IRUGO, pod_get_mic_selection,
+static DEVICE_ATTR(tuner, S_IWUSR | S_IRUGO, pod_get_tuner, pod_set_tuner);
+static DEVICE_ATTR(mic_selection, S_IWUSR | S_IRUGO, pod_get_mic_selection,
pod_set_mic_selection);
-static DEVICE_ATTR(cabinet_model, S_IWUGO | S_IRUGO, pod_get_cabinet_model,
+static DEVICE_ATTR(cabinet_model, S_IWUSR | S_IRUGO, pod_get_cabinet_model,
pod_set_cabinet_model);
-static DEVICE_ATTR(stomp_model, S_IWUGO | S_IRUGO, pod_get_stomp_model,
+static DEVICE_ATTR(stomp_model, S_IWUSR | S_IRUGO, pod_get_stomp_model,
pod_set_stomp_model);
-static DEVICE_ATTR(roomlevel, S_IWUGO | S_IRUGO, pod_get_roomlevel,
+static DEVICE_ATTR(roomlevel, S_IWUSR | S_IRUGO, pod_get_roomlevel,
pod_set_roomlevel);
-static DEVICE_ATTR(band_4_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_4_frequency, S_IWUSR | S_IRUGO,
pod_get_band_4_frequency, pod_set_band_4_frequency);
-static DEVICE_ATTR(band_6_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_6_frequency, S_IWUSR | S_IRUGO,
pod_get_band_6_frequency, pod_set_band_6_frequency);
-static DEVICE_ATTR(stomp_param_1_note_value, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(stomp_param_1_note_value, S_IWUSR | S_IRUGO,
pod_get_stomp_param_1_note_value,
pod_set_stomp_param_1_note_value);
-static DEVICE_ATTR(stomp_param_2, S_IWUGO | S_IRUGO, pod_get_stomp_param_2,
+static DEVICE_ATTR(stomp_param_2, S_IWUSR | S_IRUGO, pod_get_stomp_param_2,
pod_set_stomp_param_2);
-static DEVICE_ATTR(stomp_param_3, S_IWUGO | S_IRUGO, pod_get_stomp_param_3,
+static DEVICE_ATTR(stomp_param_3, S_IWUSR | S_IRUGO, pod_get_stomp_param_3,
pod_set_stomp_param_3);
-static DEVICE_ATTR(stomp_param_4, S_IWUGO | S_IRUGO, pod_get_stomp_param_4,
+static DEVICE_ATTR(stomp_param_4, S_IWUSR | S_IRUGO, pod_get_stomp_param_4,
pod_set_stomp_param_4);
-static DEVICE_ATTR(stomp_param_5, S_IWUGO | S_IRUGO, pod_get_stomp_param_5,
+static DEVICE_ATTR(stomp_param_5, S_IWUSR | S_IRUGO, pod_get_stomp_param_5,
pod_set_stomp_param_5);
-static DEVICE_ATTR(stomp_param_6, S_IWUGO | S_IRUGO, pod_get_stomp_param_6,
+static DEVICE_ATTR(stomp_param_6, S_IWUSR | S_IRUGO, pod_get_stomp_param_6,
pod_set_stomp_param_6);
-static DEVICE_ATTR(amp_switch_select, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(amp_switch_select, S_IWUSR | S_IRUGO,
pod_get_amp_switch_select, pod_set_amp_switch_select);
-static DEVICE_ATTR(delay_param_4, S_IWUGO | S_IRUGO, pod_get_delay_param_4,
+static DEVICE_ATTR(delay_param_4, S_IWUSR | S_IRUGO, pod_get_delay_param_4,
pod_set_delay_param_4);
-static DEVICE_ATTR(delay_param_5, S_IWUGO | S_IRUGO, pod_get_delay_param_5,
+static DEVICE_ATTR(delay_param_5, S_IWUSR | S_IRUGO, pod_get_delay_param_5,
pod_set_delay_param_5);
-static DEVICE_ATTR(delay_pre_post, S_IWUGO | S_IRUGO, pod_get_delay_pre_post,
+static DEVICE_ATTR(delay_pre_post, S_IWUSR | S_IRUGO, pod_get_delay_pre_post,
pod_set_delay_pre_post);
-static DEVICE_ATTR(delay_model, S_IWUGO | S_IRUGO, pod_get_delay_model,
+static DEVICE_ATTR(delay_model, S_IWUSR | S_IRUGO, pod_get_delay_model,
pod_set_delay_model);
-static DEVICE_ATTR(delay_verb_model, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(delay_verb_model, S_IWUSR | S_IRUGO,
pod_get_delay_verb_model, pod_set_delay_verb_model);
-static DEVICE_ATTR(tempo_msb, S_IWUGO | S_IRUGO, pod_get_tempo_msb,
+static DEVICE_ATTR(tempo_msb, S_IWUSR | S_IRUGO, pod_get_tempo_msb,
pod_set_tempo_msb);
-static DEVICE_ATTR(tempo_lsb, S_IWUGO | S_IRUGO, pod_get_tempo_lsb,
+static DEVICE_ATTR(tempo_lsb, S_IWUSR | S_IRUGO, pod_get_tempo_lsb,
pod_set_tempo_lsb);
-static DEVICE_ATTR(wah_model, S_IWUGO | S_IRUGO, pod_get_wah_model,
+static DEVICE_ATTR(wah_model, S_IWUSR | S_IRUGO, pod_get_wah_model,
pod_set_wah_model);
-static DEVICE_ATTR(bypass_volume, S_IWUGO | S_IRUGO, pod_get_bypass_volume,
+static DEVICE_ATTR(bypass_volume, S_IWUSR | S_IRUGO, pod_get_bypass_volume,
pod_set_bypass_volume);
-static DEVICE_ATTR(fx_loop_on_off, S_IWUGO | S_IRUGO, pod_get_fx_loop_on_off,
+static DEVICE_ATTR(fx_loop_on_off, S_IWUSR | S_IRUGO, pod_get_fx_loop_on_off,
pod_set_fx_loop_on_off);
-static DEVICE_ATTR(tweak_param_select, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(tweak_param_select, S_IWUSR | S_IRUGO,
pod_get_tweak_param_select, pod_set_tweak_param_select);
-static DEVICE_ATTR(amp1_engage, S_IWUGO | S_IRUGO, pod_get_amp1_engage,
+static DEVICE_ATTR(amp1_engage, S_IWUSR | S_IRUGO, pod_get_amp1_engage,
pod_set_amp1_engage);
-static DEVICE_ATTR(band_1_gain, S_IWUGO | S_IRUGO, pod_get_band_1_gain,
+static DEVICE_ATTR(band_1_gain, S_IWUSR | S_IRUGO, pod_get_band_1_gain,
pod_set_band_1_gain);
-static DEVICE_ATTR2(band_2_gain__bass, band_2_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_2_gain__bass, band_2_gain, S_IWUSR | S_IRUGO,
pod_get_band_2_gain__bass, pod_set_band_2_gain__bass);
-static DEVICE_ATTR(band_2_gain, S_IWUGO | S_IRUGO, pod_get_band_2_gain,
+static DEVICE_ATTR(band_2_gain, S_IWUSR | S_IRUGO, pod_get_band_2_gain,
pod_set_band_2_gain);
-static DEVICE_ATTR2(band_3_gain__bass, band_3_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_3_gain__bass, band_3_gain, S_IWUSR | S_IRUGO,
pod_get_band_3_gain__bass, pod_set_band_3_gain__bass);
-static DEVICE_ATTR(band_3_gain, S_IWUGO | S_IRUGO, pod_get_band_3_gain,
+static DEVICE_ATTR(band_3_gain, S_IWUSR | S_IRUGO, pod_get_band_3_gain,
pod_set_band_3_gain);
-static DEVICE_ATTR2(band_4_gain__bass, band_4_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_4_gain__bass, band_4_gain, S_IWUSR | S_IRUGO,
pod_get_band_4_gain__bass, pod_set_band_4_gain__bass);
-static DEVICE_ATTR2(band_5_gain__bass, band_5_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_5_gain__bass, band_5_gain, S_IWUSR | S_IRUGO,
pod_get_band_5_gain__bass, pod_set_band_5_gain__bass);
-static DEVICE_ATTR(band_4_gain, S_IWUGO | S_IRUGO, pod_get_band_4_gain,
+static DEVICE_ATTR(band_4_gain, S_IWUSR | S_IRUGO, pod_get_band_4_gain,
pod_set_band_4_gain);
-static DEVICE_ATTR2(band_6_gain__bass, band_6_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_6_gain__bass, band_6_gain, S_IWUSR | S_IRUGO,
pod_get_band_6_gain__bass, pod_set_band_6_gain__bass);
static DEVICE_ATTR(body, S_IRUGO, variax_get_body, line6_nop_write);
static DEVICE_ATTR(pickup1_enable, S_IRUGO, variax_get_pickup1_enable,
diff --git a/drivers/staging/line6/midi.c b/drivers/staging/line6/midi.c
index 4304dfe..ab67e88 100644
--- a/drivers/staging/line6/midi.c
+++ b/drivers/staging/line6/midi.c
@@ -350,9 +350,9 @@
return count;
}
-static DEVICE_ATTR(midi_mask_transmit, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(midi_mask_transmit, S_IWUSR | S_IRUGO,
midi_get_midi_mask_transmit, midi_set_midi_mask_transmit);
-static DEVICE_ATTR(midi_mask_receive, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(midi_mask_receive, S_IWUSR | S_IRUGO,
midi_get_midi_mask_receive, midi_set_midi_mask_receive);
/* MIDI device destructor */
diff --git a/drivers/staging/line6/pcm.c b/drivers/staging/line6/pcm.c
index e54770e..b9c55f9 100644
--- a/drivers/staging/line6/pcm.c
+++ b/drivers/staging/line6/pcm.c
@@ -79,9 +79,9 @@
return count;
}
-static DEVICE_ATTR(impulse_volume, S_IWUGO | S_IRUGO, pcm_get_impulse_volume,
+static DEVICE_ATTR(impulse_volume, S_IWUSR | S_IRUGO, pcm_get_impulse_volume,
pcm_set_impulse_volume);
-static DEVICE_ATTR(impulse_period, S_IWUGO | S_IRUGO, pcm_get_impulse_period,
+static DEVICE_ATTR(impulse_period, S_IWUSR | S_IRUGO, pcm_get_impulse_period,
pcm_set_impulse_period);
#endif
diff --git a/drivers/staging/line6/pod.c b/drivers/staging/line6/pod.c
index 22e2ced..d9b3021 100644
--- a/drivers/staging/line6/pod.c
+++ b/drivers/staging/line6/pod.c
@@ -1051,48 +1051,48 @@
#undef GET_SYSTEM_PARAM
/* POD special files: */
-static DEVICE_ATTR(channel, S_IWUGO | S_IRUGO, pod_get_channel,
+static DEVICE_ATTR(channel, S_IWUSR | S_IRUGO, pod_get_channel,
pod_set_channel);
static DEVICE_ATTR(clip, S_IRUGO, pod_wait_for_clip, line6_nop_write);
static DEVICE_ATTR(device_id, S_IRUGO, pod_get_device_id, line6_nop_write);
static DEVICE_ATTR(dirty, S_IRUGO, pod_get_dirty, line6_nop_write);
-static DEVICE_ATTR(dump, S_IWUGO | S_IRUGO, pod_get_dump, pod_set_dump);
-static DEVICE_ATTR(dump_buf, S_IWUGO | S_IRUGO, pod_get_dump_buf,
+static DEVICE_ATTR(dump, S_IWUSR | S_IRUGO, pod_get_dump, pod_set_dump);
+static DEVICE_ATTR(dump_buf, S_IWUSR | S_IRUGO, pod_get_dump_buf,
pod_set_dump_buf);
-static DEVICE_ATTR(finish, S_IWUGO, line6_nop_read, pod_set_finish);
+static DEVICE_ATTR(finish, S_IWUSR, line6_nop_read, pod_set_finish);
static DEVICE_ATTR(firmware_version, S_IRUGO, pod_get_firmware_version,
line6_nop_write);
-static DEVICE_ATTR(midi_postprocess, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(midi_postprocess, S_IWUSR | S_IRUGO,
pod_get_midi_postprocess, pod_set_midi_postprocess);
-static DEVICE_ATTR(monitor_level, S_IWUGO | S_IRUGO, pod_get_monitor_level,
+static DEVICE_ATTR(monitor_level, S_IWUSR | S_IRUGO, pod_get_monitor_level,
pod_set_monitor_level);
static DEVICE_ATTR(name, S_IRUGO, pod_get_name, line6_nop_write);
static DEVICE_ATTR(name_buf, S_IRUGO, pod_get_name_buf, line6_nop_write);
-static DEVICE_ATTR(retrieve_amp_setup, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(retrieve_amp_setup, S_IWUSR, line6_nop_read,
pod_set_retrieve_amp_setup);
-static DEVICE_ATTR(retrieve_channel, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(retrieve_channel, S_IWUSR, line6_nop_read,
pod_set_retrieve_channel);
-static DEVICE_ATTR(retrieve_effects_setup, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(retrieve_effects_setup, S_IWUSR, line6_nop_read,
pod_set_retrieve_effects_setup);
-static DEVICE_ATTR(routing, S_IWUGO | S_IRUGO, pod_get_routing,
+static DEVICE_ATTR(routing, S_IWUSR | S_IRUGO, pod_get_routing,
pod_set_routing);
static DEVICE_ATTR(serial_number, S_IRUGO, pod_get_serial_number,
line6_nop_write);
-static DEVICE_ATTR(store_amp_setup, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(store_amp_setup, S_IWUSR, line6_nop_read,
pod_set_store_amp_setup);
-static DEVICE_ATTR(store_channel, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(store_channel, S_IWUSR, line6_nop_read,
pod_set_store_channel);
-static DEVICE_ATTR(store_effects_setup, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(store_effects_setup, S_IWUSR, line6_nop_read,
pod_set_store_effects_setup);
-static DEVICE_ATTR(tuner_freq, S_IWUGO | S_IRUGO, pod_get_tuner_freq,
+static DEVICE_ATTR(tuner_freq, S_IWUSR | S_IRUGO, pod_get_tuner_freq,
pod_set_tuner_freq);
-static DEVICE_ATTR(tuner_mute, S_IWUGO | S_IRUGO, pod_get_tuner_mute,
+static DEVICE_ATTR(tuner_mute, S_IWUSR | S_IRUGO, pod_get_tuner_mute,
pod_set_tuner_mute);
static DEVICE_ATTR(tuner_note, S_IRUGO, pod_get_tuner_note, line6_nop_write);
static DEVICE_ATTR(tuner_pitch, S_IRUGO, pod_get_tuner_pitch, line6_nop_write);
#ifdef CONFIG_LINE6_USB_RAW
-static DEVICE_ATTR(raw, S_IWUGO, line6_nop_read, line6_set_raw);
+static DEVICE_ATTR(raw, S_IWUSR, line6_nop_read, line6_set_raw);
#endif
/* control info callback */
diff --git a/drivers/staging/line6/toneport.c b/drivers/staging/line6/toneport.c
index 6a10b0f..879e699 100644
--- a/drivers/staging/line6/toneport.c
+++ b/drivers/staging/line6/toneport.c
@@ -154,9 +154,9 @@
return count;
}
-static DEVICE_ATTR(led_red, S_IWUGO | S_IRUGO, line6_nop_read,
+static DEVICE_ATTR(led_red, S_IWUSR | S_IRUGO, line6_nop_read,
toneport_set_led_red);
-static DEVICE_ATTR(led_green, S_IWUGO | S_IRUGO, line6_nop_read,
+static DEVICE_ATTR(led_green, S_IWUSR | S_IRUGO, line6_nop_read,
toneport_set_led_green);
static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2)
diff --git a/drivers/staging/line6/variax.c b/drivers/staging/line6/variax.c
index 894eee7..81241cd 100644
--- a/drivers/staging/line6/variax.c
+++ b/drivers/staging/line6/variax.c
@@ -549,21 +549,21 @@
#endif
/* Variax workbench special files: */
-static DEVICE_ATTR(model, S_IWUGO | S_IRUGO, variax_get_model,
+static DEVICE_ATTR(model, S_IWUSR | S_IRUGO, variax_get_model,
variax_set_model);
-static DEVICE_ATTR(volume, S_IWUGO | S_IRUGO, variax_get_volume,
+static DEVICE_ATTR(volume, S_IWUSR | S_IRUGO, variax_get_volume,
variax_set_volume);
-static DEVICE_ATTR(tone, S_IWUGO | S_IRUGO, variax_get_tone, variax_set_tone);
+static DEVICE_ATTR(tone, S_IWUSR | S_IRUGO, variax_get_tone, variax_set_tone);
static DEVICE_ATTR(name, S_IRUGO, variax_get_name, line6_nop_write);
static DEVICE_ATTR(bank, S_IRUGO, variax_get_bank, line6_nop_write);
static DEVICE_ATTR(dump, S_IRUGO, variax_get_dump, line6_nop_write);
-static DEVICE_ATTR(active, S_IWUGO | S_IRUGO, variax_get_active,
+static DEVICE_ATTR(active, S_IWUSR | S_IRUGO, variax_get_active,
variax_set_active);
static DEVICE_ATTR(guitar, S_IRUGO, variax_get_guitar, line6_nop_write);
#ifdef CONFIG_LINE6_USB_RAW
-static DEVICE_ATTR(raw, S_IWUGO, line6_nop_read, line6_set_raw);
-static DEVICE_ATTR(raw2, S_IWUGO, line6_nop_read, variax_set_raw2);
+static DEVICE_ATTR(raw, S_IWUSR, line6_nop_read, line6_set_raw);
+static DEVICE_ATTR(raw2, S_IWUSR, line6_nop_read, variax_set_raw2);
#endif
/*
diff --git a/drivers/staging/quickstart/quickstart.c b/drivers/staging/quickstart/quickstart.c
index d746715..d83bec8 100644
--- a/drivers/staging/quickstart/quickstart.c
+++ b/drivers/staging/quickstart/quickstart.c
@@ -355,7 +355,6 @@
static void quickstart_exit(void)
{
input_unregister_device(quickstart_input);
- input_free_device(quickstart_input);
device_remove_file(&pf_device->dev, &dev_attr_pressed_button);
device_remove_file(&pf_device->dev, &dev_attr_buttons);
@@ -375,6 +374,7 @@
{
struct quickstart_btn **ptr = &quickstart_data.btn_lst;
int count;
+ int ret;
quickstart_input = input_allocate_device();
@@ -391,7 +391,13 @@
ptr = &((*ptr)->next);
}
- return input_register_device(quickstart_input);
+ ret = input_register_device(quickstart_input);
+ if (ret) {
+ input_free_device(quickstart_input);
+ return ret;
+ }
+
+ return 0;
}
static int __init quickstart_init(void)
diff --git a/drivers/staging/rt2860/usb_main_dev.c b/drivers/staging/rt2860/usb_main_dev.c
index ddacfc6..cd15daae 100644
--- a/drivers/staging/rt2860/usb_main_dev.c
+++ b/drivers/staging/rt2860/usb_main_dev.c
@@ -182,6 +182,7 @@
{USB_DEVICE(0x2001, 0x3C09)}, /* D-Link */
{USB_DEVICE(0x2001, 0x3C0A)}, /* D-Link 3072 */
{USB_DEVICE(0x2019, 0xED14)}, /* Planex Communications, Inc. */
+ {USB_DEVICE(0x0411, 0x015D)}, /* Buffalo Airstation WLI-UC-GN */
{} /* Terminating entry */
};
diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c
index 46000d7..3bdf9b3 100644
--- a/drivers/staging/rtl8187se/r8185b_init.c
+++ b/drivers/staging/rtl8187se/r8185b_init.c
@@ -264,8 +264,12 @@
udelay(10);
}
- if (TryCnt == TC_3W_POLL_MAX_TRY_CNT)
- panic("HwThreeWire(): CmdReg: %#X RE|WE bits are not clear!!\n", u1bTmp);
+ if (TryCnt == TC_3W_POLL_MAX_TRY_CNT) {
+ printk(KERN_ERR "rtl8187se: HwThreeWire(): CmdReg:"
+ " %#X RE|WE bits are not clear!!\n", u1bTmp);
+ dump_stack();
+ return 0;
+ }
/* RTL8187S HSSI Read/Write Function */
u1bTmp = read_nic_byte(dev, RF_SW_CONFIG);
@@ -298,13 +302,23 @@
int idx;
int ByteCnt = nDataBufBitCnt / 8;
/* printk("%d\n",nDataBufBitCnt); */
- if ((nDataBufBitCnt % 8) != 0)
- panic("HwThreeWire(): nDataBufBitCnt(%d) should be multiple of 8!!!\n",
- nDataBufBitCnt);
+ if ((nDataBufBitCnt % 8) != 0) {
+ printk(KERN_ERR "rtl8187se: "
+ "HwThreeWire(): nDataBufBitCnt(%d)"
+ " should be multiple of 8!!!\n",
+ nDataBufBitCnt);
+ dump_stack();
+ nDataBufBitCnt += 8;
+ nDataBufBitCnt &= ~7;
+ }
- if (nDataBufBitCnt > 64)
- panic("HwThreeWire(): nDataBufBitCnt(%d) should <= 64!!!\n",
- nDataBufBitCnt);
+ if (nDataBufBitCnt > 64) {
+ printk(KERN_ERR "rtl8187se: HwThreeWire():"
+ " nDataBufBitCnt(%d) should <= 64!!!\n",
+ nDataBufBitCnt);
+ dump_stack();
+ nDataBufBitCnt = 64;
+ }
for (idx = 0; idx < ByteCnt; idx++)
write_nic_byte(dev, (SW_3W_DB0+idx), *(pDataBuf+idx));
diff --git a/drivers/staging/rtl8712/usb_halinit.c b/drivers/staging/rtl8712/usb_halinit.c
index f6569dc..0e9483b 100644
--- a/drivers/staging/rtl8712/usb_halinit.c
+++ b/drivers/staging/rtl8712/usb_halinit.c
@@ -37,7 +37,7 @@
{
u8 val8 = 0;
u8 ret = _SUCCESS;
- u8 PollingCnt = 20;
+ int PollingCnt = 20;
struct registry_priv *pregistrypriv = &padapter->registrypriv;
if (pregistrypriv->chip_version == RTL8712_FPGA) {
diff --git a/drivers/staging/samsung-laptop/samsung-laptop.c b/drivers/staging/samsung-laptop/samsung-laptop.c
index eb44b60..ac2bf11 100644
--- a/drivers/staging/samsung-laptop/samsung-laptop.c
+++ b/drivers/staging/samsung-laptop/samsung-laptop.c
@@ -356,7 +356,7 @@
}
return count;
}
-static DEVICE_ATTR(silent, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(silent, S_IWUSR | S_IRUGO,
get_silent_state, set_silent_state);
diff --git a/drivers/staging/speakup/fakekey.c b/drivers/staging/speakup/fakekey.c
index adb93f2..65b2311 100644
--- a/drivers/staging/speakup/fakekey.c
+++ b/drivers/staging/speakup/fakekey.c
@@ -62,7 +62,6 @@
{
if (virt_keyboard != NULL) {
input_unregister_device(virt_keyboard);
- input_free_device(virt_keyboard);
virt_keyboard = NULL;
}
}
diff --git a/drivers/staging/spectra/ffsport.c b/drivers/staging/spectra/ffsport.c
index c7932da..63a9d0a 100644
--- a/drivers/staging/spectra/ffsport.c
+++ b/drivers/staging/spectra/ffsport.c
@@ -656,7 +656,7 @@
/* Here we force report 512 byte hardware sector size to Kernel */
blk_queue_logical_block_size(dev->queue, 512);
- blk_queue_ordered(dev->queue, QUEUE_ORDERED_DRAIN_FLUSH);
+ blk_queue_flush(dev->queue, REQ_FLUSH);
dev->thread = kthread_run(spectra_trans_thread, dev, "nand_thd");
if (IS_ERR(dev->thread)) {
diff --git a/drivers/staging/tm6000/tm6000-cards.c b/drivers/staging/tm6000/tm6000-cards.c
index 664e603..b143258 100644
--- a/drivers/staging/tm6000/tm6000-cards.c
+++ b/drivers/staging/tm6000/tm6000-cards.c
@@ -545,7 +545,7 @@
/* Load tuner module */
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "tuner", dev->tuner_addr, NULL);
+ "tuner", dev->tuner_addr, NULL);
memset(&tun_setup, 0, sizeof(tun_setup));
tun_setup.type = dev->tuner_type;
@@ -683,7 +683,7 @@
if (dev->caps.has_tda9874)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "tvaudio", I2C_ADDR_TDA9874, NULL);
+ "tvaudio", I2C_ADDR_TDA9874, NULL);
/* register and initialize V4L2 */
rc = tm6000_v4l2_register(dev);
diff --git a/drivers/staging/udlfb/udlfb.c b/drivers/staging/udlfb/udlfb.c
index fed2510..b7ac160 100644
--- a/drivers/staging/udlfb/udlfb.c
+++ b/drivers/staging/udlfb/udlfb.c
@@ -1441,7 +1441,7 @@
__ATTR_RO(metrics_bytes_identical),
__ATTR_RO(metrics_bytes_sent),
__ATTR_RO(metrics_cpu_kcycles_used),
- __ATTR(metrics_reset, S_IWUGO, NULL, metrics_reset_store),
+ __ATTR(metrics_reset, S_IWUSR, NULL, metrics_reset_store),
};
/*
diff --git a/drivers/staging/winbond/sysdef.h b/drivers/staging/winbond/sysdef.h
index 9195adf9..d0d71f6 100644
--- a/drivers/staging/winbond/sysdef.h
+++ b/drivers/staging/winbond/sysdef.h
@@ -2,6 +2,9 @@
#ifndef SYS_DEF_H
#define SYS_DEF_H
+
+#include <linux/delay.h>
+
#define WB_LINUX
#define WB_LINUX_WPA_PSK
diff --git a/drivers/staging/zram/zram_sysfs.c b/drivers/staging/zram/zram_sysfs.c
index 6c574a9..6b3cf00 100644
--- a/drivers/staging/zram/zram_sysfs.c
+++ b/drivers/staging/zram/zram_sysfs.c
@@ -189,10 +189,10 @@
return sprintf(buf, "%llu\n", val);
}
-static DEVICE_ATTR(disksize, S_IRUGO | S_IWUGO,
+static DEVICE_ATTR(disksize, S_IRUGO | S_IWUSR,
disksize_show, disksize_store);
static DEVICE_ATTR(initstate, S_IRUGO, initstate_show, NULL);
-static DEVICE_ATTR(reset, S_IWUGO, NULL, reset_store);
+static DEVICE_ATTR(reset, S_IWUSR, NULL, reset_store);
static DEVICE_ATTR(num_reads, S_IRUGO, num_reads_show, NULL);
static DEVICE_ATTR(num_writes, S_IRUGO, num_writes_show, NULL);
static DEVICE_ATTR(invalid_io, S_IRUGO, invalid_io_show, NULL);
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index c05c5af..35480dd 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -559,6 +559,9 @@
tty_lock();
+ /* some functions below drop BTM, so we need this bit */
+ set_bit(TTY_HUPPING, &tty->flags);
+
/* inuse_filps is protected by the single tty lock,
this really needs to change if we want to flush the
workqueue with the lock held */
@@ -578,6 +581,10 @@
}
spin_unlock(&tty_files_lock);
+ /*
+ * it drops BTM and thus races with reopen
+ * we protect the race by TTY_HUPPING
+ */
tty_ldisc_hangup(tty);
read_lock(&tasklist_lock);
@@ -615,7 +622,6 @@
tty->session = NULL;
tty->pgrp = NULL;
tty->ctrl_status = 0;
- set_bit(TTY_HUPPED, &tty->flags);
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
/* Account for the p->signal references we killed */
@@ -641,6 +647,7 @@
* can't yet guarantee all that.
*/
set_bit(TTY_HUPPED, &tty->flags);
+ clear_bit(TTY_HUPPING, &tty->flags);
tty_ldisc_enable(tty);
tty_unlock();
@@ -1310,7 +1317,9 @@
{
struct tty_driver *driver = tty->driver;
- if (test_bit(TTY_CLOSING, &tty->flags))
+ if (test_bit(TTY_CLOSING, &tty->flags) ||
+ test_bit(TTY_HUPPING, &tty->flags) ||
+ test_bit(TTY_LDISC_CHANGING, &tty->flags))
return -EIO;
if (driver->type == TTY_DRIVER_TYPE_PTY &&
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index d8e96b0..4214d582 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -454,6 +454,8 @@
/* BTM here locks versus a hangup event */
WARN_ON(!tty_locked());
ret = ld->ops->open(tty);
+ if (ret)
+ clear_bit(TTY_LDISC_OPEN, &tty->flags);
return ret;
}
return 0;
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index a858d2b..51fe179 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -3,7 +3,7 @@
*
* Copyright(C) 2005, Benedikt Spranger <b.spranger@linutronix.de>
* Copyright(C) 2005, Thomas Gleixner <tglx@linutronix.de>
- * Copyright(C) 2006, Hans J. Koch <hjk@linutronix.de>
+ * Copyright(C) 2006, Hans J. Koch <hjk@hansjkoch.de>
* Copyright(C) 2006, Greg Kroah-Hartman <greg@kroah.com>
*
* Userspace IO
diff --git a/drivers/uio/uio_cif.c b/drivers/uio/uio_cif.c
index a8ea2f1..a84a451 100644
--- a/drivers/uio/uio_cif.c
+++ b/drivers/uio/uio_cif.c
@@ -1,7 +1,7 @@
/*
* UIO Hilscher CIF card driver
*
- * (C) 2007 Hans J. Koch <hjk@linutronix.de>
+ * (C) 2007 Hans J. Koch <hjk@hansjkoch.de>
* Original code (C) 2005 Benedikt Spranger <b.spranger@linutronix.de>
*
* Licensed under GPL version 2 only.
diff --git a/drivers/uio/uio_netx.c b/drivers/uio/uio_netx.c
index 5a18e9f..5ffdb48 100644
--- a/drivers/uio/uio_netx.c
+++ b/drivers/uio/uio_netx.c
@@ -2,7 +2,7 @@
* UIO driver for Hilscher NetX based fieldbus cards (cifX, comX).
* See http://www.hilscher.com for details.
*
- * (C) 2007 Hans J. Koch <hjk@linutronix.de>
+ * (C) 2007 Hans J. Koch <hjk@hansjkoch.de>
* (C) 2008 Manuel Traut <manut@linutronix.de>
*
* Licensed under GPL version 2 only.
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 61800f7..ced846a 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1330,6 +1330,8 @@
*/
if (usb_endpoint_xfer_control(&urb->ep->desc)) {
+ if (hcd->self.uses_pio_for_control)
+ return ret;
if (hcd->self.uses_dma) {
urb->setup_dma = dma_map_single(
hcd->self.controller,
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 01bb72b..655f3c9 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -161,6 +161,18 @@
if (pdev->revision < 0xa4)
ehci->no_selective_suspend = 1;
break;
+
+ /* MCP89 chips on the MacBookAir3,1 give EPROTO when
+ * fetching device descriptors unless LPM is disabled.
+ * There are also intermittent problems enumerating
+ * devices with PPCD enabled.
+ */
+ case 0x0d9d:
+ ehci_info(ehci, "disable lpm/ppcd for nvidia mcp89");
+ ehci->has_lpm = 0;
+ ehci->has_ppcd = 0;
+ ehci->command &= ~CMD_PPCEE;
+ break;
}
break;
case PCI_VENDOR_ID_VIA:
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index fef5a1f..5d963e3 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -229,6 +229,13 @@
static void xhci_disable_port(struct xhci_hcd *xhci, u16 wIndex,
u32 __iomem *addr, u32 port_status)
{
+ /* Don't allow the USB core to disable SuperSpeed ports. */
+ if (xhci->port_array[wIndex] == 0x03) {
+ xhci_dbg(xhci, "Ignoring request to disable "
+ "SuperSpeed port.\n");
+ return;
+ }
+
/* Write 1 to disable the port */
xhci_writel(xhci, port_status | PORT_PE, addr);
port_status = xhci_readl(xhci, addr);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index d178761..0fae58e 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1443,6 +1443,13 @@
xhci->dcbaa = NULL;
scratchpad_free(xhci);
+
+ xhci->num_usb2_ports = 0;
+ xhci->num_usb3_ports = 0;
+ kfree(xhci->usb2_ports);
+ kfree(xhci->usb3_ports);
+ kfree(xhci->port_array);
+
xhci->page_size = 0;
xhci->page_shift = 0;
xhci->bus_suspended = 0;
@@ -1627,6 +1634,161 @@
&xhci->ir_set->erst_dequeue);
}
+static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
+ u32 __iomem *addr, u8 major_revision)
+{
+ u32 temp, port_offset, port_count;
+ int i;
+
+ if (major_revision > 0x03) {
+ xhci_warn(xhci, "Ignoring unknown port speed, "
+ "Ext Cap %p, revision = 0x%x\n",
+ addr, major_revision);
+ /* Ignoring port protocol we can't understand. FIXME */
+ return;
+ }
+
+ /* Port offset and count in the third dword, see section 7.2 */
+ temp = xhci_readl(xhci, addr + 2);
+ port_offset = XHCI_EXT_PORT_OFF(temp);
+ port_count = XHCI_EXT_PORT_COUNT(temp);
+ xhci_dbg(xhci, "Ext Cap %p, port offset = %u, "
+ "count = %u, revision = 0x%x\n",
+ addr, port_offset, port_count, major_revision);
+ /* Port count includes the current port offset */
+ if (port_offset == 0 || (port_offset + port_count - 1) > num_ports)
+ /* WTF? "Valid values are ‘1’ to MaxPorts" */
+ return;
+ port_offset--;
+ for (i = port_offset; i < (port_offset + port_count); i++) {
+ /* Duplicate entry. Ignore the port if the revisions differ. */
+ if (xhci->port_array[i] != 0) {
+ xhci_warn(xhci, "Duplicate port entry, Ext Cap %p,"
+ " port %u\n", addr, i);
+ xhci_warn(xhci, "Port was marked as USB %u, "
+ "duplicated as USB %u\n",
+ xhci->port_array[i], major_revision);
+ /* Only adjust the roothub port counts if we haven't
+ * found a similar duplicate.
+ */
+ if (xhci->port_array[i] != major_revision &&
+ xhci->port_array[i] != (u8) -1) {
+ if (xhci->port_array[i] == 0x03)
+ xhci->num_usb3_ports--;
+ else
+ xhci->num_usb2_ports--;
+ xhci->port_array[i] = (u8) -1;
+ }
+ /* FIXME: Should we disable the port? */
+ }
+ xhci->port_array[i] = major_revision;
+ if (major_revision == 0x03)
+ xhci->num_usb3_ports++;
+ else
+ xhci->num_usb2_ports++;
+ }
+ /* FIXME: Should we disable ports not in the Extended Capabilities? */
+}
+
+/*
+ * Scan the Extended Capabilities for the "Supported Protocol Capabilities" that
+ * specify what speeds each port is supposed to be. We can't count on the port
+ * speed bits in the PORTSC register being correct until a device is connected,
+ * but we need to set up the two fake roothubs with the correct number of USB
+ * 3.0 and USB 2.0 ports at host controller initialization time.
+ */
+static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
+{
+ u32 __iomem *addr;
+ u32 offset;
+ unsigned int num_ports;
+ int i, port_index;
+
+ addr = &xhci->cap_regs->hcc_params;
+ offset = XHCI_HCC_EXT_CAPS(xhci_readl(xhci, addr));
+ if (offset == 0) {
+ xhci_err(xhci, "No Extended Capability registers, "
+ "unable to set up roothub.\n");
+ return -ENODEV;
+ }
+
+ num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+ xhci->port_array = kzalloc(sizeof(*xhci->port_array)*num_ports, flags);
+ if (!xhci->port_array)
+ return -ENOMEM;
+
+ /*
+ * For whatever reason, the first capability offset is from the
+ * capability register base, not from the HCCPARAMS register.
+ * See section 5.3.6 for offset calculation.
+ */
+ addr = &xhci->cap_regs->hc_capbase + offset;
+ while (1) {
+ u32 cap_id;
+
+ cap_id = xhci_readl(xhci, addr);
+ if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
+ xhci_add_in_port(xhci, num_ports, addr,
+ (u8) XHCI_EXT_PORT_MAJOR(cap_id));
+ offset = XHCI_EXT_CAPS_NEXT(cap_id);
+ if (!offset || (xhci->num_usb2_ports + xhci->num_usb3_ports)
+ == num_ports)
+ break;
+ /*
+ * Once you're into the Extended Capabilities, the offset is
+ * always relative to the register holding the offset.
+ */
+ addr += offset;
+ }
+
+ if (xhci->num_usb2_ports == 0 && xhci->num_usb3_ports == 0) {
+ xhci_warn(xhci, "No ports on the roothubs?\n");
+ return -ENODEV;
+ }
+ xhci_dbg(xhci, "Found %u USB 2.0 ports and %u USB 3.0 ports.\n",
+ xhci->num_usb2_ports, xhci->num_usb3_ports);
+ /*
+ * Note we could have all USB 3.0 ports, or all USB 2.0 ports.
+ * Not sure how the USB core will handle a hub with no ports...
+ */
+ if (xhci->num_usb2_ports) {
+ xhci->usb2_ports = kmalloc(sizeof(*xhci->usb2_ports)*
+ xhci->num_usb2_ports, flags);
+ if (!xhci->usb2_ports)
+ return -ENOMEM;
+
+ port_index = 0;
+ for (i = 0; i < num_ports; i++)
+ if (xhci->port_array[i] != 0x03) {
+ xhci->usb2_ports[port_index] =
+ &xhci->op_regs->port_status_base +
+ NUM_PORT_REGS*i;
+ xhci_dbg(xhci, "USB 2.0 port at index %u, "
+ "addr = %p\n", i,
+ xhci->usb2_ports[port_index]);
+ port_index++;
+ }
+ }
+ if (xhci->num_usb3_ports) {
+ xhci->usb3_ports = kmalloc(sizeof(*xhci->usb3_ports)*
+ xhci->num_usb3_ports, flags);
+ if (!xhci->usb3_ports)
+ return -ENOMEM;
+
+ port_index = 0;
+ for (i = 0; i < num_ports; i++)
+ if (xhci->port_array[i] == 0x03) {
+ xhci->usb3_ports[port_index] =
+ &xhci->op_regs->port_status_base +
+ NUM_PORT_REGS*i;
+ xhci_dbg(xhci, "USB 3.0 port at index %u, "
+ "addr = %p\n", i,
+ xhci->usb3_ports[port_index]);
+ port_index++;
+ }
+ }
+ return 0;
+}
int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
{
@@ -1809,6 +1971,8 @@
if (scratchpad_alloc(xhci, flags))
goto fail;
+ if (xhci_setup_port_arrays(xhci, flags))
+ goto fail;
return 0;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 06fca083..45e4a31 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1549,6 +1549,15 @@
cmd_completion = command->completion;
cmd_status = &command->status;
command->command_trb = xhci->cmd_ring->enqueue;
+
+ /* Enqueue pointer can be left pointing to the link TRB,
+ * we must handle that
+ */
+ if ((command->command_trb->link.control & TRB_TYPE_BITMASK)
+ == TRB_TYPE(TRB_LINK))
+ command->command_trb =
+ xhci->cmd_ring->enq_seg->next->trbs;
+
list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
} else {
in_ctx = virt_dev->in_ctx;
@@ -2272,6 +2281,15 @@
/* Attempt to submit the Reset Device command to the command ring */
spin_lock_irqsave(&xhci->lock, flags);
reset_device_cmd->command_trb = xhci->cmd_ring->enqueue;
+
+ /* Enqueue pointer can be left pointing to the link TRB,
+ * we must handle that
+ */
+ if ((reset_device_cmd->command_trb->link.control & TRB_TYPE_BITMASK)
+ == TRB_TYPE(TRB_LINK))
+ reset_device_cmd->command_trb =
+ xhci->cmd_ring->enq_seg->next->trbs;
+
list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list);
ret = xhci_queue_reset_device(xhci, slot_id);
if (ret) {
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 85e6564..170c367 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -454,6 +454,24 @@
/**
+ * struct xhci_protocol_caps
+ * @revision: major revision, minor revision, capability ID,
+ * and next capability pointer.
+ * @name_string: Four ASCII characters to say which spec this xHC
+ * follows, typically "USB ".
+ * @port_info: Port offset, count, and protocol-defined information.
+ */
+struct xhci_protocol_caps {
+ u32 revision;
+ u32 name_string;
+ u32 port_info;
+};
+
+#define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff)
+#define XHCI_EXT_PORT_OFF(x) ((x) & 0xff)
+#define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff)
+
+/**
* struct xhci_container_ctx
* @type: Type of context. Used to calculated offsets to contained contexts.
* @size: Size of the context data
@@ -1240,6 +1258,14 @@
u32 suspended_ports[8]; /* which ports are
suspended */
unsigned long resume_done[MAX_HC_PORTS];
+ /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
+ u8 *port_array;
+ /* Array of pointers to USB 3.0 PORTSC registers */
+ u32 __iomem **usb3_ports;
+ unsigned int num_usb3_ports;
+ /* Array of pointers to USB 2.0 PORTSC registers */
+ u32 __iomem **usb2_ports;
+ unsigned int num_usb2_ports;
};
/* For testing purposes */
diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c
index 719c618..ac5bfd6 100644
--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -536,6 +536,7 @@
.open = yurex_open,
.release = yurex_release,
.fasync = yurex_fasync,
+ .llseek = default_llseek,
};
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index e6669fc..99beebc 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2116,12 +2116,15 @@
* Otherwise, wait till the gadget driver hooks up.
*/
if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
+ struct usb_hcd *hcd = musb_to_hcd(musb);
+
MUSB_HST_MODE(musb);
musb->xceiv->default_a = 1;
musb->xceiv->state = OTG_STATE_A_IDLE;
status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
+ hcd->self.uses_pio_for_control = 1;
DBG(1, "%s mode, status %d, devctl %02x %c\n",
"HOST", status,
musb_readb(musb->mregs, MUSB_DEVCTL),
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 36cfd06..9d6ade8 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -92,6 +92,59 @@
/* ----------------------------------------------------------------------- */
+/* Maps the buffer to dma */
+
+static inline void map_dma_buffer(struct musb_request *request,
+ struct musb *musb)
+{
+ if (request->request.dma == DMA_ADDR_INVALID) {
+ request->request.dma = dma_map_single(
+ musb->controller,
+ request->request.buf,
+ request->request.length,
+ request->tx
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ request->mapped = 1;
+ } else {
+ dma_sync_single_for_device(musb->controller,
+ request->request.dma,
+ request->request.length,
+ request->tx
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ request->mapped = 0;
+ }
+}
+
+/* Unmap the buffer from dma and maps it back to cpu */
+static inline void unmap_dma_buffer(struct musb_request *request,
+ struct musb *musb)
+{
+ if (request->request.dma == DMA_ADDR_INVALID) {
+ DBG(20, "not unmapping a never mapped buffer\n");
+ return;
+ }
+ if (request->mapped) {
+ dma_unmap_single(musb->controller,
+ request->request.dma,
+ request->request.length,
+ request->tx
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ request->request.dma = DMA_ADDR_INVALID;
+ request->mapped = 0;
+ } else {
+ dma_sync_single_for_cpu(musb->controller,
+ request->request.dma,
+ request->request.length,
+ request->tx
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+
+ }
+}
+
/*
* Immediately complete a request.
*
@@ -119,24 +172,8 @@
ep->busy = 1;
spin_unlock(&musb->lock);
- if (is_dma_capable()) {
- if (req->mapped) {
- dma_unmap_single(musb->controller,
- req->request.dma,
- req->request.length,
- req->tx
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- req->request.dma = DMA_ADDR_INVALID;
- req->mapped = 0;
- } else if (req->request.dma != DMA_ADDR_INVALID)
- dma_sync_single_for_cpu(musb->controller,
- req->request.dma,
- req->request.length,
- req->tx
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- }
+ if (is_dma_capable() && ep->dma)
+ unmap_dma_buffer(req, musb);
if (request->status == 0)
DBG(5, "%s done request %p, %d/%d\n",
ep->end_point.name, request,
@@ -395,6 +432,13 @@
#endif
if (!use_dma) {
+ /*
+ * Unmap the dma buffer back to cpu if dma channel
+ * programming fails
+ */
+ if (is_dma_capable() && musb_ep->dma)
+ unmap_dma_buffer(req, musb);
+
musb_write_fifo(musb_ep->hw_ep, fifo_count,
(u8 *) (request->buf + request->actual));
request->actual += fifo_count;
@@ -713,6 +757,21 @@
return;
}
#endif
+ /*
+ * Unmap the dma buffer back to cpu if dma channel
+ * programming fails. This buffer is mapped if the
+ * channel allocation is successful
+ */
+ if (is_dma_capable() && musb_ep->dma) {
+ unmap_dma_buffer(req, musb);
+
+ /*
+ * Clear DMAENAB and AUTOCLEAR for the
+ * PIO mode transfer
+ */
+ csr &= ~(MUSB_RXCSR_DMAENAB | MUSB_RXCSR_AUTOCLEAR);
+ musb_writew(epio, MUSB_RXCSR, csr);
+ }
musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *)
(request->buf + request->actual));
@@ -837,7 +896,9 @@
if (!request)
return;
}
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA)
exit:
+#endif
/* Analyze request */
rxstate(musb, to_musb_request(request));
}
@@ -1150,26 +1211,9 @@
request->epnum = musb_ep->current_epnum;
request->tx = musb_ep->is_in;
- if (is_dma_capable() && musb_ep->dma) {
- if (request->request.dma == DMA_ADDR_INVALID) {
- request->request.dma = dma_map_single(
- musb->controller,
- request->request.buf,
- request->request.length,
- request->tx
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- request->mapped = 1;
- } else {
- dma_sync_single_for_device(musb->controller,
- request->request.dma,
- request->request.length,
- request->tx
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- request->mapped = 0;
- }
- } else
+ if (is_dma_capable() && musb_ep->dma)
+ map_dma_buffer(request, musb);
+ else
request->mapped = 0;
spin_lock_irqsave(&musb->lock, lockflags);
@@ -1789,6 +1833,8 @@
spin_unlock_irqrestore(&musb->lock, flags);
if (is_otg_enabled(musb)) {
+ struct usb_hcd *hcd = musb_to_hcd(musb);
+
DBG(3, "OTG startup...\n");
/* REVISIT: funcall to other code, which also
@@ -1803,6 +1849,8 @@
musb->gadget_driver = NULL;
musb->g.dev.driver = NULL;
spin_unlock_irqrestore(&musb->lock, flags);
+ } else {
+ hcd->self.uses_pio_for_control = 1;
}
}
}
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 76f8b35..6a50965 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -201,6 +201,7 @@
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
+ { USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
@@ -696,6 +697,7 @@
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 263f625..1286f1e2 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -114,6 +114,9 @@
/* Lenz LI-USB Computer Interface. */
#define FTDI_LENZ_LIUSB_PID 0xD780
+/* Vardaan Enterprises Serial Interface VEUSB422R3 */
+#define FTDI_VARDAAN_PID 0xF070
+
/*
* Xsens Technologies BV products (http://www.xsens.com).
*/
@@ -721,6 +724,7 @@
*/
#define RTSYSTEMS_VID 0x2100 /* Vendor ID */
#define RTSYSTEMS_SERIAL_VX7_PID 0x9e52 /* Serial converter for VX-7 Radios using FT232RL */
+#define RTSYSTEMS_CT29B_PID 0x9e54 /* CT29B Radio Cable */
/*
* Bayer Ascensia Contour blood glucose meter USB-converter cable.
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 861223f..6954de5 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -51,6 +51,7 @@
.suspend = usb_serial_suspend,
.resume = usb_serial_resume,
.no_dynamic_id = 1,
+ .supports_autosuspend = 1,
};
/* There is no MODULE_DEVICE_TABLE for usbserial.c. Instead
@@ -1343,6 +1344,8 @@
return -ENODEV;
fixup_generic(driver);
+ if (driver->usb_driver)
+ driver->usb_driver->supports_autosuspend = 1;
if (!driver->description)
driver->description = driver->driver.name;
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index cad7d45..c265aed 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -1029,10 +1029,6 @@
goto err_release_pl_mem;
}
- ret = request_irq(par->irq, lcdc_irq_handler, 0, DRIVER_NAME, par);
- if (ret)
- goto err_release_pl_mem;
-
/* Initialize par */
da8xx_fb_info->var.bits_per_pixel = lcd_cfg->bpp;
@@ -1060,7 +1056,7 @@
ret = fb_alloc_cmap(&da8xx_fb_info->cmap, PALETTE_SIZE, 0);
if (ret)
- goto err_free_irq;
+ goto err_release_pl_mem;
da8xx_fb_info->cmap.len = par->palette_sz;
/* initialize var_screeninfo */
@@ -1088,8 +1084,13 @@
goto err_cpu_freq;
}
#endif
+
+ ret = request_irq(par->irq, lcdc_irq_handler, 0, DRIVER_NAME, par);
+ if (ret)
+ goto irq_freq;
return 0;
+irq_freq:
#ifdef CONFIG_CPU_FREQ
err_cpu_freq:
unregister_framebuffer(da8xx_fb_info);
@@ -1098,9 +1099,6 @@
err_dealloc_cmap:
fb_dealloc_cmap(&da8xx_fb_info->cmap);
-err_free_irq:
- free_irq(par->irq, par);
-
err_release_pl_mem:
dma_free_coherent(NULL, PALETTE_SIZE, par->v_palette_base,
par->p_palette_base);
diff --git a/drivers/video/fbcmap.c b/drivers/video/fbcmap.c
index affdf3e..5c3960d 100644
--- a/drivers/video/fbcmap.c
+++ b/drivers/video/fbcmap.c
@@ -80,6 +80,7 @@
* @cmap: frame buffer colormap structure
* @len: length of @cmap
* @transp: boolean, 1 if there is transparency, 0 otherwise
+ * @flags: flags for kmalloc memory allocation
*
* Allocates memory for a colormap @cmap. @len is the
* number of entries in the palette.
diff --git a/drivers/video/geode/lxfb.h b/drivers/video/geode/lxfb.h
index e4c4d89..be8ccb4 100644
--- a/drivers/video/geode/lxfb.h
+++ b/drivers/video/geode/lxfb.h
@@ -22,6 +22,7 @@
#define DC_HFILT_COUNT 0x100
#define DC_VFILT_COUNT 0x100
#define VP_COEFF_SIZE 0x1000
+#define VP_PAL_COUNT 0x100
#define OUTPUT_CRT 0x01
#define OUTPUT_PANEL 0x02
@@ -48,7 +49,8 @@
uint64_t vp[VP_REG_COUNT];
uint64_t fp[FP_REG_COUNT];
- uint32_t pal[DC_PAL_COUNT];
+ uint32_t dc_pal[DC_PAL_COUNT];
+ uint32_t vp_pal[VP_PAL_COUNT];
uint32_t hcoeff[DC_HFILT_COUNT * 2];
uint32_t vcoeff[DC_VFILT_COUNT];
uint32_t vp_coeff[VP_COEFF_SIZE / 4];
diff --git a/drivers/video/geode/lxfb_ops.c b/drivers/video/geode/lxfb_ops.c
index 85ec7f6..79e9abc 100644
--- a/drivers/video/geode/lxfb_ops.c
+++ b/drivers/video/geode/lxfb_ops.c
@@ -610,10 +610,15 @@
memcpy(par->vp, par->vp_regs, sizeof(par->vp));
memcpy(par->fp, par->vp_regs + VP_FP_START, sizeof(par->fp));
- /* save the palette */
+ /* save the display controller palette */
write_dc(par, DC_PAL_ADDRESS, 0);
- for (i = 0; i < ARRAY_SIZE(par->pal); i++)
- par->pal[i] = read_dc(par, DC_PAL_DATA);
+ for (i = 0; i < ARRAY_SIZE(par->dc_pal); i++)
+ par->dc_pal[i] = read_dc(par, DC_PAL_DATA);
+
+ /* save the video processor palette */
+ write_vp(par, VP_PAR, 0);
+ for (i = 0; i < ARRAY_SIZE(par->vp_pal); i++)
+ par->vp_pal[i] = read_vp(par, VP_PDR);
/* save the horizontal filter coefficients */
filt = par->dc[DC_IRQ_FILT_CTL] | DC_IRQ_FILT_CTL_H_FILT_SEL;
@@ -706,8 +711,8 @@
/* restore the palette */
write_dc(par, DC_PAL_ADDRESS, 0);
- for (i = 0; i < ARRAY_SIZE(par->pal); i++)
- write_dc(par, DC_PAL_DATA, par->pal[i]);
+ for (i = 0; i < ARRAY_SIZE(par->dc_pal); i++)
+ write_dc(par, DC_PAL_DATA, par->dc_pal[i]);
/* restore the horizontal filter coefficients */
filt = par->dc[DC_IRQ_FILT_CTL] | DC_IRQ_FILT_CTL_H_FILT_SEL;
@@ -751,6 +756,11 @@
}
}
+ /* restore video processor palette */
+ write_vp(par, VP_PAR, 0);
+ for (i = 0; i < ARRAY_SIZE(par->vp_pal); i++)
+ write_vp(par, VP_PDR, par->vp_pal[i]);
+
/* restore video coeff ram */
memcpy(par->vp_regs + VP_VCR, par->vp_coeff, sizeof(par->vp_coeff));
}
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 4a29104..a5ad77e 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -558,6 +558,9 @@
This is the driver for the built-in watchdog timer on the IT8712F
Super I/0 chipset used on many motherboards.
+ If the driver does not work, then make sure that the game port in
+ the BIOS is enabled.
+
To compile this driver as a module, choose M here: the
module will be called it8712f_wdt.
diff --git a/drivers/watchdog/bcm63xx_wdt.c b/drivers/watchdog/bcm63xx_wdt.c
index a1debc8..3c5045a 100644
--- a/drivers/watchdog/bcm63xx_wdt.c
+++ b/drivers/watchdog/bcm63xx_wdt.c
@@ -18,7 +18,6 @@
#include <linux/miscdevice.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/reboot.h>
#include <linux/types.h>
#include <linux/uaccess.h>
#include <linux/watchdog.h>
@@ -220,14 +219,6 @@
}
}
-static int bcm63xx_wdt_notify_sys(struct notifier_block *this,
- unsigned long code, void *unused)
-{
- if (code == SYS_DOWN || code == SYS_HALT)
- bcm63xx_wdt_pause();
- return NOTIFY_DONE;
-}
-
static const struct file_operations bcm63xx_wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
@@ -243,12 +234,8 @@
.fops = &bcm63xx_wdt_fops,
};
-static struct notifier_block bcm63xx_wdt_notifier = {
- .notifier_call = bcm63xx_wdt_notify_sys,
-};
-
-static int bcm63xx_wdt_probe(struct platform_device *pdev)
+static int __devinit bcm63xx_wdt_probe(struct platform_device *pdev)
{
int ret;
struct resource *r;
@@ -280,16 +267,10 @@
wdt_time);
}
- ret = register_reboot_notifier(&bcm63xx_wdt_notifier);
- if (ret) {
- dev_err(&pdev->dev, "failed to register reboot_notifier\n");
- goto unregister_timer;
- }
-
ret = misc_register(&bcm63xx_wdt_miscdev);
if (ret < 0) {
dev_err(&pdev->dev, "failed to register watchdog device\n");
- goto unregister_reboot_notifier;
+ goto unregister_timer;
}
dev_info(&pdev->dev, " started, timer margin: %d sec\n",
@@ -297,8 +278,6 @@
return 0;
-unregister_reboot_notifier:
- unregister_reboot_notifier(&bcm63xx_wdt_notifier);
unregister_timer:
bcm63xx_timer_unregister(TIMER_WDT_ID);
unmap:
@@ -306,25 +285,28 @@
return ret;
}
-static int bcm63xx_wdt_remove(struct platform_device *pdev)
+static int __devexit bcm63xx_wdt_remove(struct platform_device *pdev)
{
if (!nowayout)
bcm63xx_wdt_pause();
misc_deregister(&bcm63xx_wdt_miscdev);
-
- iounmap(bcm63xx_wdt_device.regs);
-
- unregister_reboot_notifier(&bcm63xx_wdt_notifier);
bcm63xx_timer_unregister(TIMER_WDT_ID);
-
+ iounmap(bcm63xx_wdt_device.regs);
return 0;
}
+static void bcm63xx_wdt_shutdown(struct platform_device *pdev)
+{
+ bcm63xx_wdt_pause();
+}
+
static struct platform_driver bcm63xx_wdt = {
.probe = bcm63xx_wdt_probe,
- .remove = bcm63xx_wdt_remove,
+ .remove = __devexit_p(bcm63xx_wdt_remove),
+ .shutdown = bcm63xx_wdt_shutdown,
.driver = {
+ .owner = THIS_MODULE,
.name = "bcm63xx-wdt",
}
};
diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c
index 9c21d19..f6bd6f1 100644
--- a/drivers/watchdog/gef_wdt.c
+++ b/drivers/watchdog/gef_wdt.c
@@ -30,6 +30,7 @@
#include <linux/module.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
+#include <linux/fs.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/io.h>
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index f7e90fe..b8838d2 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -32,6 +32,7 @@
* document number 322169-001, 322170-003: 5 Series, 3400 Series (PCH)
* document number 320066-003, 320257-008: EP80597 (IICH)
* document number TBD : Cougar Point (CPT)
+ * document number TBD : Patsburg (PBG)
*/
/*
@@ -146,7 +147,8 @@
TCO_CPT29, /* Cougar Point */
TCO_CPT30, /* Cougar Point */
TCO_CPT31, /* Cougar Point */
- TCO_PBG, /* Patsburg */
+ TCO_PBG1, /* Patsburg */
+ TCO_PBG2, /* Patsburg */
};
static struct {
@@ -235,6 +237,7 @@
{"Cougar Point", 2},
{"Cougar Point", 2},
{"Patsburg", 2},
+ {"Patsburg", 2},
{NULL, 0}
};
@@ -350,7 +353,8 @@
{ ITCO_PCI_DEVICE(0x1c5d, TCO_CPT29)},
{ ITCO_PCI_DEVICE(0x1c5e, TCO_CPT30)},
{ ITCO_PCI_DEVICE(0x1c5f, TCO_CPT31)},
- { ITCO_PCI_DEVICE(0x1d40, TCO_PBG)},
+ { ITCO_PCI_DEVICE(0x1d40, TCO_PBG1)},
+ { ITCO_PCI_DEVICE(0x1d41, TCO_PBG2)},
{ 0, }, /* End of list */
};
MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl);
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index 2b17ad5..43f9f02 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -412,8 +412,16 @@
register_balloon(&balloon_sysdev);
- /* Initialise the balloon with excess memory space. */
- extra_pfn_end = min(e820_end_of_ram_pfn(),
+ /*
+ * Initialise the balloon with excess memory space. We need
+ * to make sure we don't add memory which doesn't exist or
+ * logically exist. The E820 map can be trimmed to be smaller
+ * than the amount of physical memory due to the mem= command
+ * line parameter. And if this is a 32-bit non-HIGHMEM kernel
+ * on a system with memory which requires highmem to access,
+ * don't try to use it.
+ */
+ extra_pfn_end = min(min(max_pfn, e820_end_of_ram_pfn()),
(unsigned long)PFN_DOWN(xen_extra_mem_start + xen_extra_mem_size));
for (pfn = PFN_UP(xen_extra_mem_start);
pfn < extra_pfn_end;
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index f34288a..31af0ac 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -427,7 +427,7 @@
if (irq == start)
goto no_irqs;
- res = irq_alloc_desc_at(irq, 0);
+ res = irq_alloc_desc_at(irq, -1);
if (WARN_ON(res != irq))
return -1;
@@ -634,7 +634,7 @@
if (identity_mapped_irq(gsi) || (!xen_initial_domain() &&
xen_pv_domain())) {
irq = gsi;
- irq_alloc_desc_at(irq, 0);
+ irq_alloc_desc_at(irq, -1);
} else
irq = find_unbound_irq();
diff --git a/fs/cifs/Kconfig b/fs/cifs/Kconfig
index 0ed2139..ee45648 100644
--- a/fs/cifs/Kconfig
+++ b/fs/cifs/Kconfig
@@ -4,6 +4,7 @@
select NLS
select CRYPTO
select CRYPTO_MD5
+ select CRYPTO_HMAC
select CRYPTO_ARC4
help
This is the client VFS module for the Common Internet File System
@@ -143,6 +144,13 @@
to be cached locally on disk through the general filesystem cache
manager. If unsure, say N.
+config CIFS_ACL
+ bool "Provide CIFS ACL support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && CIFS_XATTR
+ help
+ Allows to fetch CIFS/NTFS ACL from the server. The DACL blob
+ is handed over to the application/caller.
+
config CIFS_EXPERIMENTAL
bool "CIFS Experimental Features (EXPERIMENTAL)"
depends on CIFS && EXPERIMENTAL
diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c
index c9b4792..c6ebea0 100644
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -560,7 +560,7 @@
struct tcon_link *tlink = cifs_sb_tlink(cifs_sb);
if (IS_ERR(tlink))
- return NULL;
+ return ERR_CAST(tlink);
xid = GetXid();
rc = CIFSSMBGetCIFSACL(xid, tlink_tcon(tlink), fid, &pntsd, pacllen);
@@ -568,7 +568,9 @@
cifs_put_tlink(tlink);
- cFYI(1, "GetCIFSACL rc = %d ACL len %d", rc, *pacllen);
+ cFYI(1, "%s: rc = %d ACL len %d", __func__, rc, *pacllen);
+ if (rc)
+ return ERR_PTR(rc);
return pntsd;
}
@@ -583,7 +585,7 @@
struct tcon_link *tlink = cifs_sb_tlink(cifs_sb);
if (IS_ERR(tlink))
- return NULL;
+ return ERR_CAST(tlink);
tcon = tlink_tcon(tlink);
xid = GetXid();
@@ -591,23 +593,22 @@
rc = CIFSSMBOpen(xid, tcon, path, FILE_OPEN, READ_CONTROL, 0,
&fid, &oplock, NULL, cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
- if (rc) {
- cERROR(1, "Unable to open file to get ACL");
- goto out;
+ if (!rc) {
+ rc = CIFSSMBGetCIFSACL(xid, tcon, fid, &pntsd, pacllen);
+ CIFSSMBClose(xid, tcon, fid);
}
- rc = CIFSSMBGetCIFSACL(xid, tcon, fid, &pntsd, pacllen);
- cFYI(1, "GetCIFSACL rc = %d ACL len %d", rc, *pacllen);
-
- CIFSSMBClose(xid, tcon, fid);
- out:
cifs_put_tlink(tlink);
FreeXid(xid);
+
+ cFYI(1, "%s: rc = %d ACL len %d", __func__, rc, *pacllen);
+ if (rc)
+ return ERR_PTR(rc);
return pntsd;
}
/* Retrieve an ACL from the server */
-static struct cifs_ntsd *get_cifs_acl(struct cifs_sb_info *cifs_sb,
+struct cifs_ntsd *get_cifs_acl(struct cifs_sb_info *cifs_sb,
struct inode *inode, const char *path,
u32 *pacllen)
{
@@ -695,7 +696,7 @@
}
/* Translate the CIFS ACL (simlar to NTFS ACL) for a file into mode bits */
-void
+int
cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb, struct cifs_fattr *fattr,
struct inode *inode, const char *path, const __u16 *pfid)
{
@@ -711,17 +712,21 @@
pntsd = get_cifs_acl(cifs_sb, inode, path, &acllen);
/* if we can retrieve the ACL, now parse Access Control Entries, ACEs */
- if (pntsd)
+ if (IS_ERR(pntsd)) {
+ rc = PTR_ERR(pntsd);
+ cERROR(1, "%s: error %d getting sec desc", __func__, rc);
+ } else {
rc = parse_sec_desc(pntsd, acllen, fattr);
- if (rc)
- cFYI(1, "parse sec desc failed rc = %d", rc);
+ kfree(pntsd);
+ if (rc)
+ cERROR(1, "parse sec desc failed rc = %d", rc);
+ }
- kfree(pntsd);
- return;
+ return rc;
}
/* Convert mode bits to an ACL so we can update the ACL on the server */
-int mode_to_acl(struct inode *inode, const char *path, __u64 nmode)
+int mode_to_cifs_acl(struct inode *inode, const char *path, __u64 nmode)
{
int rc = 0;
__u32 secdesclen = 0;
@@ -736,7 +741,10 @@
/* Add three ACEs for owner, group, everyone getting rid of
other ACEs as chmod disables ACEs and set the security descriptor */
- if (pntsd) {
+ if (IS_ERR(pntsd)) {
+ rc = PTR_ERR(pntsd);
+ cERROR(1, "%s: error %d getting sec desc", __func__, rc);
+ } else {
/* allocate memory for the smb header,
set security descriptor request security descriptor
parameters, and secuirty descriptor itself */
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 9c37897..76c8a90 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -458,6 +458,8 @@
seq_printf(s, ",acl");
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MF_SYMLINKS)
seq_printf(s, ",mfsymlinks");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_FSCACHE)
+ seq_printf(s, ",fsc");
seq_printf(s, ",rsize=%d", cifs_sb->rsize);
seq_printf(s, ",wsize=%d", cifs_sb->wsize);
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 7ed69b6b..db961dc 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -130,10 +130,12 @@
extern int cifs_get_inode_info_unix(struct inode **pinode,
const unsigned char *search_path,
struct super_block *sb, int xid);
-extern void cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb,
+extern int cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb,
struct cifs_fattr *fattr, struct inode *inode,
const char *path, const __u16 *pfid);
-extern int mode_to_acl(struct inode *inode, const char *path, __u64);
+extern int mode_to_cifs_acl(struct inode *inode, const char *path, __u64);
+extern struct cifs_ntsd *get_cifs_acl(struct cifs_sb_info *, struct inode *,
+ const char *, u32 *);
extern int cifs_mount(struct super_block *, struct cifs_sb_info *, char *,
const char *);
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 251a17c..32fa4d9 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1352,6 +1352,11 @@
"supported. Instead set "
"/proc/fs/cifs/LookupCacheEnabled to 0\n");
} else if (strnicmp(data, "fsc", 3) == 0) {
+#ifndef CONFIG_CIFS_FSCACHE
+ cERROR(1, "FS-Cache support needs CONFIG_CIFS_FSCACHE"
+ "kernel config option set");
+ return 1;
+#endif
vol->fsc = true;
} else if (strnicmp(data, "mfsymlinks", 10) == 0) {
vol->mfsymlinks = true;
diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c
index 0eb8702..548f062 100644
--- a/fs/cifs/dns_resolve.c
+++ b/fs/cifs/dns_resolve.c
@@ -66,7 +66,7 @@
/* Search for server name delimiter */
sep = memchr(hostname, '\\', len);
if (sep)
- len = sep - unc;
+ len = sep - hostname;
else
cFYI(1, "%s: probably server name is whole unc: %s",
__func__, unc);
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 06c3e83..b857ce5 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -2271,8 +2271,10 @@
void cifs_oplock_break_put(struct cifsFileInfo *cfile)
{
+ struct super_block *sb = cfile->dentry->d_sb;
+
cifsFileInfo_put(cfile);
- cifs_sb_deactive(cfile->dentry->d_sb);
+ cifs_sb_deactive(sb);
}
const struct address_space_operations cifs_addr_ops = {
diff --git a/fs/cifs/fscache.c b/fs/cifs/fscache.c
index a2ad94e..297a43d 100644
--- a/fs/cifs/fscache.c
+++ b/fs/cifs/fscache.c
@@ -2,7 +2,7 @@
* fs/cifs/fscache.c - CIFS filesystem cache interface
*
* Copyright (c) 2010 Novell, Inc.
- * Author(s): Suresh Jayaraman (sjayaraman@suse.de>
+ * Author(s): Suresh Jayaraman <sjayaraman@suse.de>
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published
@@ -67,10 +67,12 @@
if (cifsi->fscache)
return;
- cifsi->fscache = fscache_acquire_cookie(tcon->fscache,
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_FSCACHE) {
+ cifsi->fscache = fscache_acquire_cookie(tcon->fscache,
&cifs_fscache_inode_object_def, cifsi);
- cFYI(1, "CIFS: got FH cookie (0x%p/0x%p)", tcon->fscache,
+ cFYI(1, "CIFS: got FH cookie (0x%p/0x%p)", tcon->fscache,
cifsi->fscache);
+ }
}
void cifs_fscache_release_inode_cookie(struct inode *inode)
@@ -101,10 +103,8 @@
{
if ((filp->f_flags & O_ACCMODE) != O_RDONLY)
cifs_fscache_disable_inode_cookie(inode);
- else {
+ else
cifs_fscache_enable_inode_cookie(inode);
- cFYI(1, "CIFS: fscache inode cookie set");
- }
}
void cifs_fscache_reset_inode_cookie(struct inode *inode)
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index ef3a55b..28cb6e7 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -689,8 +689,13 @@
#ifdef CONFIG_CIFS_EXPERIMENTAL
/* fill in 0777 bits from ACL */
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
- cFYI(1, "Getting mode bits from ACL");
- cifs_acl_to_fattr(cifs_sb, &fattr, *pinode, full_path, pfid);
+ rc = cifs_acl_to_fattr(cifs_sb, &fattr, *pinode, full_path,
+ pfid);
+ if (rc) {
+ cFYI(1, "%s: Getting ACL failed with error: %d",
+ __func__, rc);
+ goto cgii_exit;
+ }
}
#endif
@@ -881,8 +886,10 @@
rc = cifs_get_inode_info(&inode, full_path, NULL, sb,
xid, NULL);
- if (!inode)
- return ERR_PTR(rc);
+ if (!inode) {
+ inode = ERR_PTR(rc);
+ goto out;
+ }
#ifdef CONFIG_CIFS_FSCACHE
/* populate tcon->resource_id */
@@ -898,13 +905,11 @@
inode->i_uid = cifs_sb->mnt_uid;
inode->i_gid = cifs_sb->mnt_gid;
} else if (rc) {
- kfree(full_path);
- _FreeXid(xid);
iget_failed(inode);
- return ERR_PTR(rc);
+ inode = ERR_PTR(rc);
}
-
+out:
kfree(full_path);
/* can not call macro FreeXid here since in a void func
* TODO: This is no longer true
@@ -1670,7 +1675,9 @@
return false;
}
-/* check invalid_mapping flag and zap the cache if it's set */
+/*
+ * Zap the cache. Called when invalid_mapping flag is set.
+ */
static void
cifs_invalidate_mapping(struct inode *inode)
{
@@ -2115,9 +2122,14 @@
if (attrs->ia_valid & ATTR_MODE) {
rc = 0;
#ifdef CONFIG_CIFS_EXPERIMENTAL
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL)
- rc = mode_to_acl(inode, full_path, mode);
- else
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
+ rc = mode_to_cifs_acl(inode, full_path, mode);
+ if (rc) {
+ cFYI(1, "%s: Setting ACL failed with error: %d",
+ __func__, rc);
+ goto cifs_setattr_exit;
+ }
+ } else
#endif
if (((mode & S_IWUGO) == 0) &&
(cifsInode->cifsAttrs & ATTR_READONLY) == 0) {
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index ef7bb7b..32d300e 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -226,26 +226,29 @@
char *full_path = NULL;
struct cifsFileInfo *cifsFile;
struct cifs_sb_info *cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
- struct tcon_link *tlink;
+ struct tcon_link *tlink = NULL;
struct cifsTconInfo *pTcon;
- tlink = cifs_sb_tlink(cifs_sb);
- if (IS_ERR(tlink))
- return PTR_ERR(tlink);
- pTcon = tlink_tcon(tlink);
-
- if (file->private_data == NULL)
- file->private_data =
- kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
if (file->private_data == NULL) {
- rc = -ENOMEM;
- goto error_exit;
+ tlink = cifs_sb_tlink(cifs_sb);
+ if (IS_ERR(tlink))
+ return PTR_ERR(tlink);
+
+ cifsFile = kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
+ if (cifsFile == NULL) {
+ rc = -ENOMEM;
+ goto error_exit;
+ }
+ file->private_data = cifsFile;
+ cifsFile->tlink = cifs_get_tlink(tlink);
+ pTcon = tlink_tcon(tlink);
+ } else {
+ cifsFile = file->private_data;
+ pTcon = tlink_tcon(cifsFile->tlink);
}
- cifsFile = file->private_data;
cifsFile->invalidHandle = true;
cifsFile->srch_inf.endOfSearch = false;
- cifsFile->tlink = cifs_get_tlink(tlink);
full_path = build_path_from_dentry(file->f_path.dentry);
if (full_path == NULL) {
diff --git a/fs/cifs/xattr.c b/fs/cifs/xattr.c
index a264b74..eae2a14 100644
--- a/fs/cifs/xattr.c
+++ b/fs/cifs/xattr.c
@@ -30,10 +30,11 @@
#define MAX_EA_VALUE_SIZE 65535
#define CIFS_XATTR_DOS_ATTRIB "user.DosAttrib"
+#define CIFS_XATTR_CIFS_ACL "system.cifs_acl"
#define CIFS_XATTR_USER_PREFIX "user."
#define CIFS_XATTR_SYSTEM_PREFIX "system."
#define CIFS_XATTR_OS2_PREFIX "os2."
-#define CIFS_XATTR_SECURITY_PREFIX ".security"
+#define CIFS_XATTR_SECURITY_PREFIX "security."
#define CIFS_XATTR_TRUSTED_PREFIX "trusted."
#define XATTR_TRUSTED_PREFIX_LEN 8
#define XATTR_SECURITY_PREFIX_LEN 9
@@ -277,29 +278,8 @@
cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
-#ifdef CONFIG_CIFS_EXPERIMENTAL
- else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
- __u16 fid;
- int oplock = 0;
- struct cifs_ntsd *pacl = NULL;
- __u32 buflen = 0;
- if (experimEnabled)
- rc = CIFSSMBOpen(xid, pTcon, full_path,
- FILE_OPEN, GENERIC_READ, 0, &fid,
- &oplock, NULL, cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
- /* else rc is EOPNOTSUPP from above */
-
- if (rc == 0) {
- rc = CIFSSMBGetCIFSACL(xid, pTcon, fid, &pacl,
- &buflen);
- CIFSSMBClose(xid, pTcon, fid);
- }
- }
-#endif /* EXPERIMENTAL */
#else
- cFYI(1, "query POSIX ACL not supported yet");
+ cFYI(1, "Query POSIX ACL not supported yet");
#endif /* CONFIG_CIFS_POSIX */
} else if (strncmp(ea_name, POSIX_ACL_XATTR_DEFAULT,
strlen(POSIX_ACL_XATTR_DEFAULT)) == 0) {
@@ -311,8 +291,33 @@
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
#else
- cFYI(1, "query POSIX default ACL not supported yet");
-#endif
+ cFYI(1, "Query POSIX default ACL not supported yet");
+#endif /* CONFIG_CIFS_POSIX */
+ } else if (strncmp(ea_name, CIFS_XATTR_CIFS_ACL,
+ strlen(CIFS_XATTR_CIFS_ACL)) == 0) {
+#ifdef CONFIG_CIFS_ACL
+ u32 acllen;
+ struct cifs_ntsd *pacl;
+
+ pacl = get_cifs_acl(cifs_sb, direntry->d_inode,
+ full_path, &acllen);
+ if (IS_ERR(pacl)) {
+ rc = PTR_ERR(pacl);
+ cERROR(1, "%s: error %zd getting sec desc",
+ __func__, rc);
+ } else {
+ if (ea_value) {
+ if (acllen > buf_size)
+ acllen = -ERANGE;
+ else
+ memcpy(ea_value, pacl, acllen);
+ }
+ rc = acllen;
+ kfree(pacl);
+ }
+#else
+ cFYI(1, "Query CIFS ACL not supported yet");
+#endif /* CONFIG_CIFS_ACL */
} else if (strncmp(ea_name,
CIFS_XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN) == 0) {
cFYI(1, "Trusted xattr namespace not supported yet");
diff --git a/fs/compat.c b/fs/compat.c
index c580c32..eb1740a 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -1350,6 +1350,10 @@
argv++;
if (i++ >= max)
return -E2BIG;
+
+ if (fatal_signal_pending(current))
+ return -ERESTARTNOHAND;
+ cond_resched();
}
}
return i;
@@ -1391,6 +1395,12 @@
while (len > 0) {
int offset, bytes_to_copy;
+ if (fatal_signal_pending(current)) {
+ ret = -ERESTARTNOHAND;
+ goto out;
+ }
+ cond_resched();
+
offset = pos % PAGE_SIZE;
if (offset == 0)
offset = PAGE_SIZE;
@@ -1407,18 +1417,8 @@
if (!kmapped_page || kpos != (pos & PAGE_MASK)) {
struct page *page;
-#ifdef CONFIG_STACK_GROWSUP
- ret = expand_stack_downwards(bprm->vma, pos);
- if (ret < 0) {
- /* We've exceed the stack rlimit. */
- ret = -E2BIG;
- goto out;
- }
-#endif
- ret = get_user_pages(current, bprm->mm, pos,
- 1, 1, 1, &page, NULL);
- if (ret <= 0) {
- /* We've exceed the stack rlimit. */
+ page = get_arg_page(bprm, pos, 1);
+ if (!page) {
ret = -E2BIG;
goto out;
}
@@ -1539,8 +1539,10 @@
return retval;
out:
- if (bprm->mm)
+ if (bprm->mm) {
+ acct_arg_size(bprm, 0);
mmput(bprm->mm);
+ }
out_file:
if (bprm->file) {
diff --git a/fs/exec.c b/fs/exec.c
index 99d33a13..d68c378 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -164,7 +164,26 @@
#ifdef CONFIG_MMU
-static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
+void acct_arg_size(struct linux_binprm *bprm, unsigned long pages)
+{
+ struct mm_struct *mm = current->mm;
+ long diff = (long)(pages - bprm->vma_pages);
+
+ if (!mm || !diff)
+ return;
+
+ bprm->vma_pages = pages;
+
+#ifdef SPLIT_RSS_COUNTING
+ add_mm_counter(mm, MM_ANONPAGES, diff);
+#else
+ spin_lock(&mm->page_table_lock);
+ add_mm_counter(mm, MM_ANONPAGES, diff);
+ spin_unlock(&mm->page_table_lock);
+#endif
+}
+
+struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
int write)
{
struct page *page;
@@ -186,6 +205,8 @@
unsigned long size = bprm->vma->vm_end - bprm->vma->vm_start;
struct rlimit *rlim;
+ acct_arg_size(bprm, size / PAGE_SIZE);
+
/*
* We've historically supported up to 32 pages (ARG_MAX)
* of argument strings even with small stacks
@@ -276,7 +297,11 @@
#else
-static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
+void acct_arg_size(struct linux_binprm *bprm, unsigned long pages)
+{
+}
+
+struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
int write)
{
struct page *page;
@@ -1003,6 +1028,7 @@
/*
* Release all of the old mmap stuff
*/
+ acct_arg_size(bprm, 0);
retval = exec_mmap(bprm->mm);
if (retval)
goto out;
@@ -1426,8 +1452,10 @@
return retval;
out:
- if (bprm->mm)
- mmput (bprm->mm);
+ if (bprm->mm) {
+ acct_arg_size(bprm, 0);
+ mmput(bprm->mm);
+ }
out_file:
if (bprm->file) {
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 8ea4a41..f0a384e 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -395,13 +395,9 @@
static
int nfs_same_file(struct dentry *dentry, struct nfs_entry *entry)
{
- struct nfs_inode *node;
if (dentry->d_inode == NULL)
goto different;
- node = NFS_I(dentry->d_inode);
- if (node->fh.size != entry->fh->size)
- goto different;
- if (strncmp(node->fh.data, entry->fh->data, node->fh.size) != 0)
+ if (nfs_compare_fh(entry->fh, NFS_FH(dentry->d_inode)) != 0)
goto different;
return 1;
different:
diff --git a/fs/reiserfs/xattr_acl.c b/fs/reiserfs/xattr_acl.c
index 536d697..90d2fcb 100644
--- a/fs/reiserfs/xattr_acl.c
+++ b/fs/reiserfs/xattr_acl.c
@@ -472,7 +472,9 @@
struct reiserfs_transaction_handle th;
size_t size = reiserfs_xattr_nblocks(inode,
reiserfs_acl_size(clone->a_count));
- reiserfs_write_lock(inode->i_sb);
+ int depth;
+
+ depth = reiserfs_write_lock_once(inode->i_sb);
error = journal_begin(&th, inode->i_sb, size * 2);
if (!error) {
int error2;
@@ -482,7 +484,7 @@
if (error2)
error = error2;
}
- reiserfs_write_unlock(inode->i_sb);
+ reiserfs_write_unlock_once(inode->i_sb, depth);
}
posix_acl_release(clone);
return error;
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index 7d287af..691f612 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -934,7 +934,6 @@
struct xfs_inode *ip = XFS_I(inode);
struct buffer_head *bh, *head;
loff_t offset = page_offset(page);
- ssize_t len = 1 << inode->i_blkbits;
if (!xfs_is_delayed_page(page, IO_DELAY))
goto out_invalidate;
@@ -949,58 +948,14 @@
xfs_ilock(ip, XFS_ILOCK_EXCL);
bh = head = page_buffers(page);
do {
- int done;
- xfs_fileoff_t offset_fsb;
- xfs_bmbt_irec_t imap;
- int nimaps = 1;
int error;
- xfs_fsblock_t firstblock;
- xfs_bmap_free_t flist;
+ xfs_fileoff_t start_fsb;
if (!buffer_delay(bh))
goto next_buffer;
- offset_fsb = XFS_B_TO_FSBT(ip->i_mount, offset);
-
- /*
- * Map the range first and check that it is a delalloc extent
- * before trying to unmap the range. Otherwise we will be
- * trying to remove a real extent (which requires a
- * transaction) or a hole, which is probably a bad idea...
- */
- error = xfs_bmapi(NULL, ip, offset_fsb, 1,
- XFS_BMAPI_ENTIRE, NULL, 0, &imap,
- &nimaps, NULL);
-
- if (error) {
- /* something screwed, just bail */
- if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
- xfs_fs_cmn_err(CE_ALERT, ip->i_mount,
- "page discard failed delalloc mapping lookup.");
- }
- break;
- }
- if (!nimaps) {
- /* nothing there */
- goto next_buffer;
- }
- if (imap.br_startblock != DELAYSTARTBLOCK) {
- /* been converted, ignore */
- goto next_buffer;
- }
- WARN_ON(imap.br_blockcount == 0);
-
- /*
- * Note: while we initialise the firstblock/flist pair, they
- * should never be used because blocks should never be
- * allocated or freed for a delalloc extent and hence we need
- * don't cancel or finish them after the xfs_bunmapi() call.
- */
- xfs_bmap_init(&flist, &firstblock);
- error = xfs_bunmapi(NULL, ip, offset_fsb, 1, 0, 1, &firstblock,
- &flist, &done);
-
- ASSERT(!flist.xbf_count && !flist.xbf_first);
+ start_fsb = XFS_B_TO_FSBT(ip->i_mount, offset);
+ error = xfs_bmap_punch_delalloc_range(ip, start_fsb, 1);
if (error) {
/* something screwed, just bail */
if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
@@ -1010,7 +965,7 @@
break;
}
next_buffer:
- offset += len;
+ offset += 1 << inode->i_blkbits;
} while ((bh = bh->b_this_page) != head);
@@ -1505,11 +1460,42 @@
struct inode *inode = mapping->host;
if (to > inode->i_size) {
- struct iattr ia = {
- .ia_valid = ATTR_SIZE | ATTR_FORCE,
- .ia_size = inode->i_size,
- };
- xfs_setattr(XFS_I(inode), &ia, XFS_ATTR_NOLOCK);
+ /*
+ * punch out the delalloc blocks we have already allocated. We
+ * don't call xfs_setattr() to do this as we may be in the
+ * middle of a multi-iovec write and so the vfs inode->i_size
+ * will not match the xfs ip->i_size and so it will zero too
+ * much. Hence we jus truncate the page cache to zero what is
+ * necessary and punch the delalloc blocks directly.
+ */
+ struct xfs_inode *ip = XFS_I(inode);
+ xfs_fileoff_t start_fsb;
+ xfs_fileoff_t end_fsb;
+ int error;
+
+ truncate_pagecache(inode, to, inode->i_size);
+
+ /*
+ * Check if there are any blocks that are outside of i_size
+ * that need to be trimmed back.
+ */
+ start_fsb = XFS_B_TO_FSB(ip->i_mount, inode->i_size) + 1;
+ end_fsb = XFS_B_TO_FSB(ip->i_mount, to);
+ if (end_fsb <= start_fsb)
+ return;
+
+ xfs_ilock(ip, XFS_ILOCK_EXCL);
+ error = xfs_bmap_punch_delalloc_range(ip, start_fsb,
+ end_fsb - start_fsb);
+ if (error) {
+ /* something screwed, just bail */
+ if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
+ xfs_fs_cmn_err(CE_ALERT, ip->i_mount,
+ "xfs_vm_write_failed: unable to clean up ino %lld",
+ ip->i_ino);
+ }
+ }
+ xfs_iunlock(ip, XFS_ILOCK_EXCL);
}
}
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index aa1d353..4c5deb6 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -488,29 +488,16 @@
spin_unlock(&pag->pag_buf_lock);
xfs_perag_put(pag);
- /* Attempt to get the semaphore without sleeping,
- * if this does not work then we need to drop the
- * spinlock and do a hard attempt on the semaphore.
- */
- if (down_trylock(&bp->b_sema)) {
+ if (xfs_buf_cond_lock(bp)) {
+ /* failed, so wait for the lock if requested. */
if (!(flags & XBF_TRYLOCK)) {
- /* wait for buffer ownership */
xfs_buf_lock(bp);
XFS_STATS_INC(xb_get_locked_waited);
} else {
- /* We asked for a trylock and failed, no need
- * to look at file offset and length here, we
- * know that this buffer at least overlaps our
- * buffer and is locked, therefore our buffer
- * either does not exist, or is this buffer.
- */
xfs_buf_rele(bp);
XFS_STATS_INC(xb_busy_locked);
return NULL;
}
- } else {
- /* trylock worked */
- XB_SET_OWNER(bp);
}
if (bp->b_flags & XBF_STALE) {
@@ -876,10 +863,18 @@
*/
/*
- * Locks a buffer object, if it is not already locked.
- * Note that this in no way locks the underlying pages, so it is only
- * useful for synchronizing concurrent use of buffer objects, not for
- * synchronizing independent access to the underlying pages.
+ * Locks a buffer object, if it is not already locked. Note that this in
+ * no way locks the underlying pages, so it is only useful for
+ * synchronizing concurrent use of buffer objects, not for synchronizing
+ * independent access to the underlying pages.
+ *
+ * If we come across a stale, pinned, locked buffer, we know that we are
+ * being asked to lock a buffer that has been reallocated. Because it is
+ * pinned, we know that the log has not been pushed to disk and hence it
+ * will still be locked. Rather than continuing to have trylock attempts
+ * fail until someone else pushes the log, push it ourselves before
+ * returning. This means that the xfsaild will not get stuck trying
+ * to push on stale inode buffers.
*/
int
xfs_buf_cond_lock(
@@ -890,6 +885,8 @@
locked = down_trylock(&bp->b_sema) == 0;
if (locked)
XB_SET_OWNER(bp);
+ else if (atomic_read(&bp->b_pin_count) && (bp->b_flags & XBF_STALE))
+ xfs_log_force(bp->b_target->bt_mount, 0);
trace_xfs_buf_cond_lock(bp, _RET_IP_);
return locked ? 0 : -EBUSY;
diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c
index 8abd12e..4111cd3 100644
--- a/fs/xfs/xfs_bmap.c
+++ b/fs/xfs/xfs_bmap.c
@@ -5471,8 +5471,13 @@
if (error)
goto out_unlock_iolock;
}
-
- ASSERT(ip->i_delayed_blks == 0);
+ /*
+ * even after flushing the inode, there can still be delalloc
+ * blocks on the inode beyond EOF due to speculative
+ * preallocation. These are not removed until the release
+ * function is called or the inode is inactivated. Hence we
+ * cannot assert here that ip->i_delayed_blks == 0.
+ */
}
lock = xfs_ilock_map_shared(ip);
@@ -6070,3 +6075,79 @@
*count += xfs_bmbt_disk_get_blockcount(frp);
}
}
+
+/*
+ * dead simple method of punching delalyed allocation blocks from a range in
+ * the inode. Walks a block at a time so will be slow, but is only executed in
+ * rare error cases so the overhead is not critical. This will alays punch out
+ * both the start and end blocks, even if the ranges only partially overlap
+ * them, so it is up to the caller to ensure that partial blocks are not
+ * passed in.
+ */
+int
+xfs_bmap_punch_delalloc_range(
+ struct xfs_inode *ip,
+ xfs_fileoff_t start_fsb,
+ xfs_fileoff_t length)
+{
+ xfs_fileoff_t remaining = length;
+ int error = 0;
+
+ ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
+
+ do {
+ int done;
+ xfs_bmbt_irec_t imap;
+ int nimaps = 1;
+ xfs_fsblock_t firstblock;
+ xfs_bmap_free_t flist;
+
+ /*
+ * Map the range first and check that it is a delalloc extent
+ * before trying to unmap the range. Otherwise we will be
+ * trying to remove a real extent (which requires a
+ * transaction) or a hole, which is probably a bad idea...
+ */
+ error = xfs_bmapi(NULL, ip, start_fsb, 1,
+ XFS_BMAPI_ENTIRE, NULL, 0, &imap,
+ &nimaps, NULL);
+
+ if (error) {
+ /* something screwed, just bail */
+ if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
+ xfs_fs_cmn_err(CE_ALERT, ip->i_mount,
+ "Failed delalloc mapping lookup ino %lld fsb %lld.",
+ ip->i_ino, start_fsb);
+ }
+ break;
+ }
+ if (!nimaps) {
+ /* nothing there */
+ goto next_block;
+ }
+ if (imap.br_startblock != DELAYSTARTBLOCK) {
+ /* been converted, ignore */
+ goto next_block;
+ }
+ WARN_ON(imap.br_blockcount == 0);
+
+ /*
+ * Note: while we initialise the firstblock/flist pair, they
+ * should never be used because blocks should never be
+ * allocated or freed for a delalloc extent and hence we need
+ * don't cancel or finish them after the xfs_bunmapi() call.
+ */
+ xfs_bmap_init(&flist, &firstblock);
+ error = xfs_bunmapi(NULL, ip, start_fsb, 1, 0, 1, &firstblock,
+ &flist, &done);
+ if (error)
+ break;
+
+ ASSERT(!flist.xbf_count && !flist.xbf_first);
+next_block:
+ start_fsb++;
+ remaining--;
+ } while(remaining > 0);
+
+ return error;
+}
diff --git a/fs/xfs/xfs_bmap.h b/fs/xfs/xfs_bmap.h
index 71ec9b6..3651191 100644
--- a/fs/xfs/xfs_bmap.h
+++ b/fs/xfs/xfs_bmap.h
@@ -394,6 +394,11 @@
int whichfork,
int *count);
+int
+xfs_bmap_punch_delalloc_range(
+ struct xfs_inode *ip,
+ xfs_fileoff_t start_fsb,
+ xfs_fileoff_t length);
#endif /* __KERNEL__ */
#endif /* __XFS_BMAP_H__ */
diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c
index 3b9582c..e60490b 100644
--- a/fs/xfs/xfs_dfrag.c
+++ b/fs/xfs/xfs_dfrag.c
@@ -377,6 +377,19 @@
ip->i_d.di_format = tip->i_d.di_format;
tip->i_d.di_format = tmp;
+ /*
+ * The extents in the source inode could still contain speculative
+ * preallocation beyond EOF (e.g. the file is open but not modified
+ * while defrag is in progress). In that case, we need to copy over the
+ * number of delalloc blocks the data fork in the source inode is
+ * tracking beyond EOF so that when the fork is truncated away when the
+ * temporary inode is unlinked we don't underrun the i_delayed_blks
+ * counter on that inode.
+ */
+ ASSERT(tip->i_delayed_blks == 0);
+ tip->i_delayed_blks = ip->i_delayed_blks;
+ ip->i_delayed_blks = 0;
+
ilf_fields = XFS_ILOG_CORE;
switch(ip->i_d.di_format) {
diff --git a/fs/xfs/xfs_error.c b/fs/xfs/xfs_error.c
index ed99902..c78cc6a 100644
--- a/fs/xfs/xfs_error.c
+++ b/fs/xfs/xfs_error.c
@@ -58,6 +58,7 @@
int xfs_etest[XFS_NUM_INJECT_ERROR];
int64_t xfs_etest_fsid[XFS_NUM_INJECT_ERROR];
char * xfs_etest_fsname[XFS_NUM_INJECT_ERROR];
+int xfs_error_test_active;
int
xfs_error_test(int error_tag, int *fsidp, char *expression,
@@ -108,6 +109,7 @@
len = strlen(mp->m_fsname);
xfs_etest_fsname[i] = kmem_alloc(len + 1, KM_SLEEP);
strcpy(xfs_etest_fsname[i], mp->m_fsname);
+ xfs_error_test_active++;
return 0;
}
}
@@ -137,6 +139,7 @@
xfs_etest_fsid[i] = 0LL;
kmem_free(xfs_etest_fsname[i]);
xfs_etest_fsname[i] = NULL;
+ xfs_error_test_active--;
}
}
diff --git a/fs/xfs/xfs_error.h b/fs/xfs/xfs_error.h
index c2c1a07..f338847 100644
--- a/fs/xfs/xfs_error.h
+++ b/fs/xfs/xfs_error.h
@@ -127,13 +127,14 @@
#define XFS_RANDOM_BMAPIFORMAT XFS_RANDOM_DEFAULT
#ifdef DEBUG
+extern int xfs_error_test_active;
extern int xfs_error_test(int, int *, char *, int, char *, unsigned long);
#define XFS_NUM_INJECT_ERROR 10
#define XFS_TEST_ERROR(expr, mp, tag, rf) \
- ((expr) || \
+ ((expr) || (xfs_error_test_active && \
xfs_error_test((tag), (mp)->m_fixedfsid, "expr", __LINE__, __FILE__, \
- (rf)))
+ (rf))))
extern int xfs_errortag_add(int error_tag, xfs_mount_t *mp);
extern int xfs_errortag_clearall(xfs_mount_t *mp, int loud);
diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c
index c7ac020..7c8d30c 100644
--- a/fs/xfs/xfs_inode_item.c
+++ b/fs/xfs/xfs_inode_item.c
@@ -657,18 +657,37 @@
}
/*
- * This is called to find out where the oldest active copy of the
- * inode log item in the on disk log resides now that the last log
- * write of it completed at the given lsn. Since we always re-log
- * all dirty data in an inode, the latest copy in the on disk log
- * is the only one that matters. Therefore, simply return the
- * given lsn.
+ * This is called to find out where the oldest active copy of the inode log
+ * item in the on disk log resides now that the last log write of it completed
+ * at the given lsn. Since we always re-log all dirty data in an inode, the
+ * latest copy in the on disk log is the only one that matters. Therefore,
+ * simply return the given lsn.
+ *
+ * If the inode has been marked stale because the cluster is being freed, we
+ * don't want to (re-)insert this inode into the AIL. There is a race condition
+ * where the cluster buffer may be unpinned before the inode is inserted into
+ * the AIL during transaction committed processing. If the buffer is unpinned
+ * before the inode item has been committed and inserted, then it is possible
+ * for the buffer to be written and IO completions before the inode is inserted
+ * into the AIL. In that case, we'd be inserting a clean, stale inode into the
+ * AIL which will never get removed. It will, however, get reclaimed which
+ * triggers an assert in xfs_inode_free() complaining about freein an inode
+ * still in the AIL.
+ *
+ * To avoid this, return a lower LSN than the one passed in so that the
+ * transaction committed code will not move the inode forward in the AIL but
+ * will still unpin it properly.
*/
STATIC xfs_lsn_t
xfs_inode_item_committed(
struct xfs_log_item *lip,
xfs_lsn_t lsn)
{
+ struct xfs_inode_log_item *iip = INODE_ITEM(lip);
+ struct xfs_inode *ip = iip->ili_inode;
+
+ if (xfs_iflags_test(ip, XFS_ISTALE))
+ return lsn - 1;
return lsn;
}
diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h
index a065612..64a7114 100644
--- a/include/linux/binfmts.h
+++ b/include/linux/binfmts.h
@@ -29,6 +29,7 @@
char buf[BINPRM_BUF_SIZE];
#ifdef CONFIG_MMU
struct vm_area_struct *vma;
+ unsigned long vma_pages;
#else
# define MAX_ARG_PAGES 32
struct page *page[MAX_ARG_PAGES];
@@ -59,6 +60,10 @@
unsigned long loader, exec;
};
+extern void acct_arg_size(struct linux_binprm *bprm, unsigned long pages);
+extern struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
+ int write);
+
#define BINPRM_FLAGS_ENFORCE_NONDUMP_BIT 0
#define BINPRM_FLAGS_ENFORCE_NONDUMP (1 << BINPRM_FLAGS_ENFORCE_NONDUMP_BIT)
diff --git a/include/linux/cpu.h b/include/linux/cpu.h
index 4823af6..5f09323 100644
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -10,11 +10,6 @@
*
* CPUs are exported via sysfs in the class/cpu/devices/
* directory.
- *
- * Per-cpu interfaces can be implemented using a struct device_interface.
- * See the following for how to do this:
- * - drivers/base/intf.c
- * - Documentation/driver-model/interface.txt
*/
#ifndef _LINUX_CPU_H_
#define _LINUX_CPU_H_
diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
index 4307231..31c237a 100644
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -161,6 +161,9 @@
extern void put_page_bootmem(struct page *page);
#endif
+void lock_memory_hotplug(void);
+void unlock_memory_hotplug(void);
+
#else /* ! CONFIG_MEMORY_HOTPLUG */
/*
* Stub functions for when hotplug is off
@@ -192,6 +195,9 @@
{
}
+static inline void lock_memory_hotplug(void) {}
+static inline void unlock_memory_hotplug(void) {}
+
#endif /* ! CONFIG_MEMORY_HOTPLUG */
#ifdef CONFIG_MEMORY_HOTREMOVE
diff --git a/include/linux/node.h b/include/linux/node.h
index 06292da..1466945 100644
--- a/include/linux/node.h
+++ b/include/linux/node.h
@@ -10,11 +10,6 @@
*
* Nodes are exported via driverfs in the class/node/devices/
* directory.
- *
- * Per-node interfaces can be implemented using a struct device_interface.
- * See the following for how to do this:
- * - drivers/base/intf.c
- * - Documentation/driver-model/interface.txt
*/
#ifndef _LINUX_NODE_H_
#define _LINUX_NODE_H_
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 032d79f..54e4eaa 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -366,6 +366,7 @@
#define TTY_HUPPED 18 /* Post driver->hangup() */
#define TTY_FLUSHING 19 /* Flushing to ldisc in progress */
#define TTY_FLUSHPENDING 20 /* Queued buffer flush pending */
+#define TTY_HUPPING 21 /* ->hangup() in progress */
#define TTY_WRITE_FLUSH(tty) tty_write_flush((tty))
diff --git a/include/linux/uio_driver.h b/include/linux/uio_driver.h
index d6188e5..665517c 100644
--- a/include/linux/uio_driver.h
+++ b/include/linux/uio_driver.h
@@ -3,7 +3,7 @@
*
* Copyright(C) 2005, Benedikt Spranger <b.spranger@linutronix.de>
* Copyright(C) 2005, Thomas Gleixner <tglx@linutronix.de>
- * Copyright(C) 2006, Hans J. Koch <hjk@linutronix.de>
+ * Copyright(C) 2006, Hans J. Koch <hjk@hansjkoch.de>
* Copyright(C) 2006, Greg Kroah-Hartman <greg@kroah.com>
*
* Userspace IO driver.
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 24300d8..a28eb25 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -313,6 +313,10 @@
int busnum; /* Bus number (in order of reg) */
const char *bus_name; /* stable id (PCI slot_name etc) */
u8 uses_dma; /* Does the host controller use DMA? */
+ u8 uses_pio_for_control; /*
+ * Does the host controller use PIO
+ * for control transfers?
+ */
u8 otg_port; /* 0, or number of OTG/HNP port */
unsigned is_b_host:1; /* true during some HNP roleswitches */
unsigned b_hnp_enable:1; /* OTG: did A-Host enable HNP? */
diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
index a03dcf6..44b54f6 100644
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -7,8 +7,6 @@
struct vm_area_struct; /* vma defining user mapping in mm_types.h */
-extern bool vmap_lazy_unmap;
-
/* bits in flags of vmalloc's vm_struct below */
#define VM_IOREMAP 0x00000001 /* ioremap() and friends */
#define VM_ALLOC 0x00000002 /* vmalloc() */
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index 41dd480..239125a 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -137,31 +137,27 @@
/* Load an i2c module and return an initialized v4l2_subdev struct.
- Only call request_module if module_name != NULL.
The client_type argument is the name of the chip that's on the adapter. */
struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev,
- struct i2c_adapter *adapter,
- const char *module_name, const char *client_type,
+ struct i2c_adapter *adapter, const char *client_type,
int irq, void *platform_data,
u8 addr, const unsigned short *probe_addrs);
/* Load an i2c module and return an initialized v4l2_subdev struct.
- Only call request_module if module_name != NULL.
The client_type argument is the name of the chip that's on the adapter. */
static inline struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev,
- struct i2c_adapter *adapter,
- const char *module_name, const char *client_type,
+ struct i2c_adapter *adapter, const char *client_type,
u8 addr, const unsigned short *probe_addrs)
{
- return v4l2_i2c_new_subdev_cfg(v4l2_dev, adapter, module_name,
- client_type, 0, NULL, addr, probe_addrs);
+ return v4l2_i2c_new_subdev_cfg(v4l2_dev, adapter, client_type, 0, NULL,
+ addr, probe_addrs);
}
struct i2c_board_info;
struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
- struct i2c_adapter *adapter, const char *module_name,
- struct i2c_board_info *info, const unsigned short *probe_addrs);
+ struct i2c_adapter *adapter, struct i2c_board_info *info,
+ const unsigned short *probe_addrs);
/* Initialize an v4l2_subdev with data from an i2c_client struct */
void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client,
diff --git a/kernel/exit.c b/kernel/exit.c
index 21aa7b3..676149a 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -914,6 +914,15 @@
if (unlikely(!tsk->pid))
panic("Attempted to kill the idle task!");
+ /*
+ * If do_exit is called because this processes oopsed, it's possible
+ * that get_fs() was left as KERNEL_DS, so reset it to USER_DS before
+ * continuing. Amongst other possible reasons, this is to prevent
+ * mm_release()->clear_child_tid() from writing to a user-controlled
+ * kernel address.
+ */
+ set_fs(USER_DS);
+
tracehook_report_exit(&code);
validate_creds_for_do_exit(tsk);
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index c4a3558..8585524 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -2738,7 +2738,8 @@
unlock_page(pagecache_page);
put_page(pagecache_page);
}
- unlock_page(page);
+ if (page != pagecache_page)
+ unlock_page(page);
out_mutex:
mutex_unlock(&hugetlb_instantiation_mutex);
diff --git a/mm/ksm.c b/mm/ksm.c
index 65ab5c7..43bc893 100644
--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -1724,8 +1724,13 @@
/*
* Keep it very simple for now: just lock out ksmd and
* MADV_UNMERGEABLE while any memory is going offline.
+ * mutex_lock_nested() is necessary because lockdep was alarmed
+ * that here we take ksm_thread_mutex inside notifier chain
+ * mutex, and later take notifier chain mutex inside
+ * ksm_thread_mutex to unlock it. But that's safe because both
+ * are inside mem_hotplug_mutex.
*/
- mutex_lock(&ksm_thread_mutex);
+ mutex_lock_nested(&ksm_thread_mutex, SINGLE_DEPTH_NESTING);
break;
case MEM_OFFLINE:
diff --git a/mm/memory-failure.c b/mm/memory-failure.c
index 1243241..46ab2c0 100644
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -51,6 +51,7 @@
#include <linux/slab.h>
#include <linux/swapops.h>
#include <linux/hugetlb.h>
+#include <linux/memory_hotplug.h>
#include "internal.h"
int sysctl_memory_failure_early_kill __read_mostly = 0;
@@ -1230,11 +1231,10 @@
return 1;
/*
- * The lock_system_sleep prevents a race with memory hotplug,
- * because the isolation assumes there's only a single user.
+ * The lock_memory_hotplug prevents a race with memory hotplug.
* This is a big hammer, a better would be nicer.
*/
- lock_system_sleep();
+ lock_memory_hotplug();
/*
* Isolate the page, so that it doesn't get reallocated if it
@@ -1264,7 +1264,7 @@
ret = 1;
}
unset_migratetype_isolate(p);
- unlock_system_sleep();
+ unlock_memory_hotplug();
return ret;
}
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 9260314..2c6523a 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -34,6 +34,23 @@
#include "internal.h"
+DEFINE_MUTEX(mem_hotplug_mutex);
+
+void lock_memory_hotplug(void)
+{
+ mutex_lock(&mem_hotplug_mutex);
+
+ /* for exclusive hibernation if CONFIG_HIBERNATION=y */
+ lock_system_sleep();
+}
+
+void unlock_memory_hotplug(void)
+{
+ unlock_system_sleep();
+ mutex_unlock(&mem_hotplug_mutex);
+}
+
+
/* add this memory to iomem resource */
static struct resource *register_memory_resource(u64 start, u64 size)
{
@@ -493,7 +510,7 @@
pg_data_t *pgdat;
int ret;
- lock_system_sleep();
+ lock_memory_hotplug();
pgdat = hotadd_new_pgdat(nid, 0);
if (pgdat) {
ret = -ENOMEM;
@@ -504,7 +521,7 @@
BUG_ON(ret);
out:
- unlock_system_sleep();
+ unlock_memory_hotplug();
return ret;
}
@@ -516,7 +533,7 @@
struct resource *res;
int ret;
- lock_system_sleep();
+ lock_memory_hotplug();
res = register_memory_resource(start, size);
ret = -EEXIST;
@@ -563,7 +580,7 @@
release_memory_resource(res);
out:
- unlock_system_sleep();
+ unlock_memory_hotplug();
return ret;
}
EXPORT_SYMBOL_GPL(add_memory);
@@ -791,7 +808,7 @@
if (!test_pages_in_a_zone(start_pfn, end_pfn))
return -EINVAL;
- lock_system_sleep();
+ lock_memory_hotplug();
zone = page_zone(pfn_to_page(start_pfn));
node = zone_to_nid(zone);
@@ -880,7 +897,7 @@
writeback_set_ratelimit();
memory_notify(MEM_OFFLINE, &arg);
- unlock_system_sleep();
+ unlock_memory_hotplug();
return 0;
failed_removal:
@@ -891,7 +908,7 @@
undo_isolate_page_range(start_pfn, end_pfn);
out:
- unlock_system_sleep();
+ unlock_memory_hotplug();
return ret;
}
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 4a57f13..11ff260 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1307,15 +1307,18 @@
goto out;
/* Find the mm_struct */
+ rcu_read_lock();
read_lock(&tasklist_lock);
task = pid ? find_task_by_vpid(pid) : current;
if (!task) {
read_unlock(&tasklist_lock);
+ rcu_read_unlock();
err = -ESRCH;
goto out;
}
mm = get_task_mm(task);
read_unlock(&tasklist_lock);
+ rcu_read_unlock();
err = -EINVAL;
if (!mm)
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index a3d66b3..eb5cc7d 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -31,8 +31,6 @@
#include <asm/tlbflush.h>
#include <asm/shmparam.h>
-bool vmap_lazy_unmap __read_mostly = true;
-
/*** Page table manipulation functions ***/
static void vunmap_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end)
@@ -503,9 +501,6 @@
{
unsigned int log;
- if (!vmap_lazy_unmap)
- return 0;
-
log = fls(num_online_cpus());
return log * (32UL * 1024 * 1024 / PAGE_SIZE);
@@ -566,7 +561,6 @@
if (va->va_end > *end)
*end = va->va_end;
nr += (va->va_end - va->va_start) >> PAGE_SHIFT;
- unmap_vmap_area(va);
list_add_tail(&va->purge_list, &valist);
va->flags |= VM_LAZY_FREEING;
va->flags &= ~VM_LAZY_FREE;
@@ -611,10 +605,11 @@
}
/*
- * Free and unmap a vmap area, caller ensuring flush_cache_vunmap had been
- * called for the correct range previously.
+ * Free a vmap area, caller ensuring that the area has been unmapped
+ * and flush_cache_vunmap had been called for the correct range
+ * previously.
*/
-static void free_unmap_vmap_area_noflush(struct vmap_area *va)
+static void free_vmap_area_noflush(struct vmap_area *va)
{
va->flags |= VM_LAZY_FREE;
atomic_add((va->va_end - va->va_start) >> PAGE_SHIFT, &vmap_lazy_nr);
@@ -623,6 +618,16 @@
}
/*
+ * Free and unmap a vmap area, caller ensuring flush_cache_vunmap had been
+ * called for the correct range previously.
+ */
+static void free_unmap_vmap_area_noflush(struct vmap_area *va)
+{
+ unmap_vmap_area(va);
+ free_vmap_area_noflush(va);
+}
+
+/*
* Free and unmap a vmap area
*/
static void free_unmap_vmap_area(struct vmap_area *va)
@@ -798,7 +803,7 @@
spin_unlock(&vmap_block_tree_lock);
BUG_ON(tmp != vb);
- free_unmap_vmap_area_noflush(vb->va);
+ free_vmap_area_noflush(vb->va);
call_rcu(&vb->rcu_head, rcu_free_vb);
}
@@ -936,6 +941,8 @@
rcu_read_unlock();
BUG_ON(!vb);
+ vunmap_page_range((unsigned long)addr, (unsigned long)addr + size);
+
spin_lock(&vb->lock);
BUG_ON(bitmap_allocate_region(vb->dirty_map, offset >> PAGE_SHIFT, order));
@@ -988,7 +995,6 @@
s = vb->va->va_start + (i << PAGE_SHIFT);
e = vb->va->va_start + (j << PAGE_SHIFT);
- vunmap_page_range(s, e);
flush = 1;
if (s < start)
diff --git a/mm/vmstat.c b/mm/vmstat.c
index 42eac4d..8f62f17 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -750,8 +750,6 @@
"nr_shmem",
"nr_dirtied",
"nr_written",
- "nr_dirty_threshold",
- "nr_dirty_background_threshold",
#ifdef CONFIG_NUMA
"numa_hit",
@@ -761,6 +759,8 @@
"numa_local",
"numa_other",
#endif
+ "nr_dirty_threshold",
+ "nr_dirty_background_threshold",
#ifdef CONFIG_VM_EVENT_COUNTERS
"pgpgin",
diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index 4d6f8653..8e8ea9c 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -92,7 +92,7 @@
config MAC80211_LEDS
bool "Enable LED triggers"
depends on MAC80211
- select NEW_LEDS
+ depends on LEDS_CLASS
select LEDS_TRIGGERS
---help---
This option enables a few LED triggers for different
diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c
index 5c8c7df..b753ec6 100644
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -1510,16 +1510,19 @@
static int snd_pcm_oss_reset(struct snd_pcm_oss_file *pcm_oss_file)
{
struct snd_pcm_substream *substream;
+ struct snd_pcm_runtime *runtime;
+ int i;
- substream = pcm_oss_file->streams[SNDRV_PCM_STREAM_PLAYBACK];
- if (substream != NULL) {
+ for (i = 0; i < 2; i++) {
+ substream = pcm_oss_file->streams[i];
+ if (!substream)
+ continue;
+ runtime = substream->runtime;
snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_DROP, NULL);
- substream->runtime->oss.prepare = 1;
- }
- substream = pcm_oss_file->streams[SNDRV_PCM_STREAM_CAPTURE];
- if (substream != NULL) {
- snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_DROP, NULL);
- substream->runtime->oss.prepare = 1;
+ runtime->oss.prepare = 1;
+ runtime->oss.buffer_used = 0;
+ runtime->oss.prev_hw_ptr_period = 0;
+ runtime->oss.period_ptr = 0;
}
return 0;
}
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 886d7c7..8fddc9d 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9865,7 +9865,6 @@
SND_PCI_QUIRK(0x17aa, 0x3bfc, "Lenovo NB0763", ALC883_LENOVO_NB0763),
SND_PCI_QUIRK(0x17aa, 0x3bfd, "Lenovo NB0763", ALC883_LENOVO_NB0763),
SND_PCI_QUIRK(0x17aa, 0x101d, "Lenovo Sky", ALC888_LENOVO_SKY),
- SND_PCI_QUIRK(0x17c0, 0x4071, "MEDION MD2", ALC883_MEDION_MD2),
SND_PCI_QUIRK(0x17c0, 0x4085, "MEDION MD96630", ALC888_LENOVO_MS7195_DIG),
SND_PCI_QUIRK(0x17f2, 0x5000, "Albatron KI690-AM2", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1991, 0x5625, "Haier W66", ALC883_HAIER_W66),
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 5c71080..efa4225 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1627,6 +1627,8 @@
static struct snd_pci_quirk stac92hd73xx_codec_id_cfg_tbl[] = {
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02a1,
"Alienware M17x", STAC_ALIENWARE_M17X),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x043a,
+ "Alienware M17x", STAC_ALIENWARE_M17X),
{} /* terminator */
};
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 6313858..e725c09 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -526,7 +526,7 @@
snd_soc_update_bits(codec, WM8731_RINVOL, 0x100, 0);
/* Disable bypass path by default */
- snd_soc_update_bits(codec, WM8731_APANA, 0x4, 0);
+ snd_soc_update_bits(codec, WM8731_APANA, 0x8, 0);
snd_soc_add_controls(codec, wm8731_snd_controls,
ARRAY_SIZE(wm8731_snd_controls));
diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c
index 0d7dcf1..7d7847a 100644
--- a/sound/soc/fsl/mpc8610_hpcd.c
+++ b/sound/soc/fsl/mpc8610_hpcd.c
@@ -498,6 +498,7 @@
dev_err(&pdev->dev, "platform device add failed\n");
goto error;
}
+ dev_set_drvdata(&pdev->dev, sound_device);
of_node_put(codec_np);
diff --git a/sound/soc/fsl/p1022_ds.c b/sound/soc/fsl/p1022_ds.c
index 63b9eaa..026b756 100644
--- a/sound/soc/fsl/p1022_ds.c
+++ b/sound/soc/fsl/p1022_ds.c
@@ -498,6 +498,7 @@
dev_err(&pdev->dev, "platform device add failed\n");
goto error;
}
+ dev_set_drvdata(&pdev->dev, sound_device);
of_node_put(codec_np);
diff --git a/sound/soc/nuc900/nuc900-ac97.c b/sound/soc/nuc900/nuc900-ac97.c
index e00e39d..dac6732 100644
--- a/sound/soc/nuc900/nuc900-ac97.c
+++ b/sound/soc/nuc900/nuc900-ac97.c
@@ -49,7 +49,7 @@
mutex_lock(&ac97_mutex);
val = nuc900_checkready();
- if (!!val) {
+ if (val) {
dev_err(nuc900_audio->dev, "AC97 codec is not ready\n");
goto out;
}
@@ -102,7 +102,7 @@
mutex_lock(&ac97_mutex);
tmp = nuc900_checkready();
- if (!!tmp)
+ if (tmp)
dev_err(nuc900_audio->dev, "AC97 codec is not ready\n");
/* clear the R_WB bit and write register index */
@@ -149,7 +149,7 @@
udelay(100);
val = nuc900_checkready();
- if (!!val)
+ if (val)
dev_err(nuc900_audio->dev, "AC97 codec is not ready\n");
mutex_unlock(&ac97_mutex);
@@ -263,8 +263,7 @@
return ret;
}
-static int nuc900_ac97_probe(struct platform_device *pdev,
- struct snd_soc_dai *dai)
+static int nuc900_ac97_probe(struct snd_soc_dai *dai)
{
struct nuc900_audio *nuc900_audio = nuc900_ac97_data;
unsigned long val;
@@ -284,12 +283,12 @@
return 0;
}
-static void nuc900_ac97_remove(struct platform_device *pdev,
- struct snd_soc_dai *dai)
+static int nuc900_ac97_remove(struct snd_soc_dai *dai)
{
struct nuc900_audio *nuc900_audio = nuc900_ac97_data;
clk_disable(nuc900_audio->clk);
+ return 0;
}
static struct snd_soc_dai_ops nuc900_ac97_dai_ops = {
@@ -313,7 +312,7 @@
.channels_max = 2,
},
.ops = &nuc900_ac97_dai_ops,
-}
+};
static int __devinit nuc900_ac97_drvprobe(struct platform_device *pdev)
{
diff --git a/sound/soc/nuc900/nuc900-audio.h b/sound/soc/nuc900/nuc900-audio.h
index aeed8ea..59f7e8e 100644
--- a/sound/soc/nuc900/nuc900-audio.h
+++ b/sound/soc/nuc900/nuc900-audio.h
@@ -110,4 +110,6 @@
};
+extern struct nuc900_audio *nuc900_ac97_data;
+
#endif /*end _NUC900_AUDIO_H */
diff --git a/sound/soc/nuc900/nuc900-pcm.c b/sound/soc/nuc900/nuc900-pcm.c
index 195d1ac..8263f56 100644
--- a/sound/soc/nuc900/nuc900-pcm.c
+++ b/sound/soc/nuc900/nuc900-pcm.c
@@ -50,12 +50,12 @@
unsigned long flags;
int ret = 0;
- spin_lock_irqsave(&nuc900_audio->lock, flags);
-
ret = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
if (ret < 0)
return ret;
+ spin_lock_irqsave(&nuc900_audio->lock, flags);
+
nuc900_audio->substream = substream;
nuc900_audio->dma_addr[substream->stream] = runtime->dma_addr;
nuc900_audio->buffersize[substream->stream] =
@@ -169,6 +169,7 @@
struct snd_pcm_runtime *runtime = substream->runtime;
struct nuc900_audio *nuc900_audio = runtime->private_data;
unsigned long flags, val;
+ int ret = 0;
spin_lock_irqsave(&nuc900_audio->lock, flags);
@@ -197,10 +198,10 @@
AUDIO_WRITE(nuc900_audio->mmio + ACTL_RESET, val);
break;
default:
- return -EINVAL;
+ ret = -EINVAL;
}
spin_unlock_irqrestore(&nuc900_audio->lock, flags);
- return 0;
+ return ret;
}
static int nuc900_dma_trigger(struct snd_pcm_substream *substream, int cmd)
@@ -332,7 +333,7 @@
.ops = &nuc900_dma_ops,
.pcm_new = nuc900_dma_new,
.pcm_free = nuc900_dma_free_dma_buffers,
-}
+};
static int __devinit nuc900_soc_platform_probe(struct platform_device *pdev)
{
diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
index d542ea2..a088db6 100644
--- a/sound/soc/omap/Kconfig
+++ b/sound/soc/omap/Kconfig
@@ -12,8 +12,8 @@
config SND_OMAP_SOC_N810
tristate "SoC Audio support for Nokia N810"
depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C
+ depends on OMAP_MUX
select SND_OMAP_SOC_MCBSP
- select OMAP_MUX
select SND_SOC_TLV320AIC3X
help
Say Y if you want to add support for SoC audio on Nokia N810.
diff --git a/sound/soc/s6000/s6000-i2s.c b/sound/soc/s6000/s6000-i2s.c
index 8778faa..3052f64 100644
--- a/sound/soc/s6000/s6000-i2s.c
+++ b/sound/soc/s6000/s6000-i2s.c
@@ -434,7 +434,7 @@
.rate_max = 1562500,
},
.ops = &s6000_i2s_dai_ops,
-}
+};
static int __devinit s6000_i2s_probe(struct platform_device *pdev)
{
diff --git a/sound/soc/s6000/s6000-pcm.c b/sound/soc/s6000/s6000-pcm.c
index 271fd22..ab3ccae 100644
--- a/sound/soc/s6000/s6000-pcm.c
+++ b/sound/soc/s6000/s6000-pcm.c
@@ -473,7 +473,7 @@
}
res = request_irq(params->irq, s6000_pcm_irq, IRQF_SHARED,
- s6000_soc_platform.name, pcm);
+ "s6000-audio", pcm);
if (res) {
printk(KERN_ERR "s6000-pcm couldn't get IRQ\n");
return res;
diff --git a/sound/soc/s6000/s6105-ipcam.c b/sound/soc/s6000/s6105-ipcam.c
index 96c05e1..c1244c5 100644
--- a/sound/soc/s6000/s6105-ipcam.c
+++ b/sound/soc/s6000/s6105-ipcam.c
@@ -167,7 +167,7 @@
snd_soc_dapm_sync(codec);
- snd_ctl_add(codec->snd_card, snd_ctl_new1(&audio_out_mux, codec));
+ snd_ctl_add(codec->card->snd_card, snd_ctl_new1(&audio_out_mux, codec));
return 0;
}
