mmc: block: Move files to core
Once upon a time it made sense to keep the mmc block device driver and its
related code, in its own directory called card. Over time, more an more
functions/structures have become shared through generic mmc header files,
between the core and the card directory. In other words, the relationship
between them has become closer.
By sharing functions/structures via generic header files, it becomes easy
for outside users to abuse them. In a way to avoid that from happen, let's
move the files from card directory into the core directory, as it enables
us to move definitions of functions/structures into mmc core specific
header files.
Note, this is only the first step in providing a cleaner mmc interface for
outside users. Following changes will do the actual cleanup, as that is not
part of this change.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index f2eeb38..7e803fc4 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -23,8 +23,6 @@
source "drivers/mmc/core/Kconfig"
-source "drivers/mmc/card/Kconfig"
-
source "drivers/mmc/host/Kconfig"
endif # MMC
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 400756e..416b6d1 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -5,5 +5,4 @@
subdir-ccflags-$(CONFIG_MMC_DEBUG) := -DDEBUG
obj-$(CONFIG_MMC) += core/
-obj-$(CONFIG_MMC) += card/
obj-$(subst m,y,$(CONFIG_MMC)) += host/
diff --git a/drivers/mmc/card/Kconfig b/drivers/mmc/card/Kconfig
deleted file mode 100644
index 5562308..0000000
--- a/drivers/mmc/card/Kconfig
+++ /dev/null
@@ -1,70 +0,0 @@
-#
-# MMC/SD card drivers
-#
-
-comment "MMC/SD/SDIO Card Drivers"
-
-config MMC_BLOCK
- tristate "MMC block device driver"
- depends on BLOCK
- default y
- help
- Say Y here to enable the MMC block device driver support.
- This provides a block device driver, which you can use to
- mount the filesystem. Almost everyone wishing MMC support
- should say Y or M here.
-
-config MMC_BLOCK_MINORS
- int "Number of minors per block device"
- depends on MMC_BLOCK
- range 4 256
- default 8
- help
- Number of minors per block device. One is needed for every
- partition on the disk (plus one for the whole disk).
-
- Number of total MMC minors available is 256, so your number
- of supported block devices will be limited to 256 divided
- by this number.
-
- Default is 8 to be backwards compatible with previous
- hardwired device numbering.
-
- If unsure, say 8 here.
-
-config MMC_BLOCK_BOUNCE
- bool "Use bounce buffer for simple hosts"
- depends on MMC_BLOCK
- default y
- help
- SD/MMC is a high latency protocol where it is crucial to
- send large requests in order to get high performance. Many
- controllers, however, are restricted to continuous memory
- (i.e. they can't do scatter-gather), something the kernel
- rarely can provide.
-
- Say Y here to help these restricted hosts by bouncing
- requests back and forth from a large buffer. You will get
- a big performance gain at the cost of up to 64 KiB of
- physical memory.
-
- If unsure, say Y here.
-
-config SDIO_UART
- tristate "SDIO UART/GPS class support"
- depends on TTY
- help
- SDIO function driver for SDIO cards that implements the UART
- class, as well as the GPS class which appears like a UART.
-
-config MMC_TEST
- tristate "MMC host test driver"
- help
- Development driver that performs a series of reads and writes
- to a memory card in order to expose certain well known bugs
- in host controllers. The tests are executed by writing to the
- "test" file in debugfs under each card. Note that whatever is
- on your card will be overwritten by these tests.
-
- This driver is only of interest to those developing or
- testing a host driver. Most people should say N here.
diff --git a/drivers/mmc/card/Makefile b/drivers/mmc/card/Makefile
deleted file mode 100644
index c73b406..0000000
--- a/drivers/mmc/card/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Makefile for MMC/SD card drivers
-#
-
-obj-$(CONFIG_MMC_BLOCK) += mmc_block.o
-mmc_block-objs := block.o queue.o
-obj-$(CONFIG_MMC_TEST) += mmc_test.o
-
-obj-$(CONFIG_SDIO_UART) += sdio_uart.o
-
diff --git a/drivers/mmc/core/Kconfig b/drivers/mmc/core/Kconfig
index 250f223..cdfa852 100644
--- a/drivers/mmc/core/Kconfig
+++ b/drivers/mmc/core/Kconfig
@@ -22,3 +22,69 @@
This driver can also be built as a module. If so, the module
will be called pwrseq_simple.
+
+config MMC_BLOCK
+ tristate "MMC block device driver"
+ depends on BLOCK
+ default y
+ help
+ Say Y here to enable the MMC block device driver support.
+ This provides a block device driver, which you can use to
+ mount the filesystem. Almost everyone wishing MMC support
+ should say Y or M here.
+
+config MMC_BLOCK_MINORS
+ int "Number of minors per block device"
+ depends on MMC_BLOCK
+ range 4 256
+ default 8
+ help
+ Number of minors per block device. One is needed for every
+ partition on the disk (plus one for the whole disk).
+
+ Number of total MMC minors available is 256, so your number
+ of supported block devices will be limited to 256 divided
+ by this number.
+
+ Default is 8 to be backwards compatible with previous
+ hardwired device numbering.
+
+ If unsure, say 8 here.
+
+config MMC_BLOCK_BOUNCE
+ bool "Use bounce buffer for simple hosts"
+ depends on MMC_BLOCK
+ default y
+ help
+ SD/MMC is a high latency protocol where it is crucial to
+ send large requests in order to get high performance. Many
+ controllers, however, are restricted to continuous memory
+ (i.e. they can't do scatter-gather), something the kernel
+ rarely can provide.
+
+ Say Y here to help these restricted hosts by bouncing
+ requests back and forth from a large buffer. You will get
+ a big performance gain at the cost of up to 64 KiB of
+ physical memory.
+
+ If unsure, say Y here.
+
+config SDIO_UART
+ tristate "SDIO UART/GPS class support"
+ depends on TTY
+ help
+ SDIO function driver for SDIO cards that implements the UART
+ class, as well as the GPS class which appears like a UART.
+
+config MMC_TEST
+ tristate "MMC host test driver"
+ help
+ Development driver that performs a series of reads and writes
+ to a memory card in order to expose certain well known bugs
+ in host controllers. The tests are executed by writing to the
+ "test" file in debugfs under each card. Note that whatever is
+ on your card will be overwritten by these tests.
+
+ This driver is only of interest to those developing or
+ testing a host driver. Most people should say N here.
+
diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile
index f007151..b2a257d 100644
--- a/drivers/mmc/core/Makefile
+++ b/drivers/mmc/core/Makefile
@@ -12,3 +12,7 @@
obj-$(CONFIG_PWRSEQ_SIMPLE) += pwrseq_simple.o
obj-$(CONFIG_PWRSEQ_EMMC) += pwrseq_emmc.o
mmc_core-$(CONFIG_DEBUG_FS) += debugfs.o
+obj-$(CONFIG_MMC_BLOCK) += mmc_block.o
+mmc_block-objs := block.o queue.o
+obj-$(CONFIG_MMC_TEST) += mmc_test.o
+obj-$(CONFIG_SDIO_UART) += sdio_uart.o
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/core/block.c
similarity index 100%
rename from drivers/mmc/card/block.c
rename to drivers/mmc/core/block.c
diff --git a/drivers/mmc/card/block.h b/drivers/mmc/core/block.h
similarity index 100%
rename from drivers/mmc/card/block.h
rename to drivers/mmc/core/block.h
diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/core/mmc_test.c
similarity index 99%
rename from drivers/mmc/card/mmc_test.c
rename to drivers/mmc/core/mmc_test.c
index ec1d1c4..3ab6e52 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/core/mmc_test.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/mmc/card/mmc_test.c
- *
* Copyright 2007-2008 Pierre Ossman
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/core/queue.c
similarity index 99%
rename from drivers/mmc/card/queue.c
rename to drivers/mmc/core/queue.c
index cf29809..f4e3d76 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/core/queue.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/mmc/card/queue.c
- *
* Copyright (C) 2003 Russell King, All Rights Reserved.
* Copyright 2006-2007 Pierre Ossman
*
diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/core/queue.h
similarity index 100%
rename from drivers/mmc/card/queue.h
rename to drivers/mmc/core/queue.h
diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/core/sdio_uart.c
similarity index 99%
rename from drivers/mmc/card/sdio_uart.c
rename to drivers/mmc/core/sdio_uart.c
index 491c187..d3c91f4 100644
--- a/drivers/mmc/card/sdio_uart.c
+++ b/drivers/mmc/core/sdio_uart.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/mmc/card/sdio_uart.c - SDIO UART/GPS driver
+ * SDIO UART/GPS driver
*
* Based on drivers/serial/8250.c and drivers/serial/serial_core.c
* by Russell King.
