| # Copyright (C) all contributors <meta@public-inbox.org> |
| # License: AGPL-3.0+ <https://www.gnu.org/licenses/agpl-3.0.txt> |
| # |
| # Each instance of this represents an IMAP client connected to |
| # public-inbox-imapd. Much of this was taken from NNTP, but |
| # further refined while experimenting on future ideas to handle |
| # slow storage. |
| # |
| # data notes: |
| # |
| # * NNTP article numbers are UIDs, mm->created_at is UIDVALIDITY |
| # |
| # * public-inboxes are sliced into mailboxes of 50K messages |
| # to not overload MUAs: $NEWSGROUP_NAME.$SLICE_INDEX |
| # Slices are similar in concept to v2 "epochs". Epochs |
| # are for the limitations of git clients, while slices are |
| # for the limitations of IMAP clients. |
| # |
| # * We also take advantage of slices being only 50K to store |
| # "UID offset" to message sequence number (MSN) mapping |
| # as a 50K uint16_t array (via pack("S*", ...)). "UID offset" |
| # is the offset from {uid_base} which determines the start of |
| # the mailbox slice. |
| # |
| # fields: |
| # imapd: PublicInbox::IMAPD ref |
| # ibx: PublicInbox::Inbox ref |
| # long_cb: long_response private data |
| # uid_base: base UID for mailbox slice (0-based) |
| # -login_tag: IMAP TAG for LOGIN |
| # -idle_tag: IMAP response tag for IDLE |
| # uo2m: UID-to-MSN mapping |
| package PublicInbox::IMAP; |
| use strict; |
| use parent qw(PublicInbox::DS); |
| use PublicInbox::Eml; |
| use PublicInbox::EmlContentFoo qw(parse_content_disposition); |
| use PublicInbox::DS qw(now); |
| use PublicInbox::GitAsyncCat; |
| use Text::ParseWords qw(parse_line); |
| use Errno qw(EAGAIN); |
| use PublicInbox::Address; |
| |
| sub LINE_MAX () { 8000 } # RFC 2683 3.2.1.5 |
| |
| # Changing UID_SLICE will cause grief for clients which cache. |
| # This also needs to be <64K: we pack it into a uint16_t |
| # for long_response UID (offset) => MSN mappings |
| sub UID_SLICE () { 50_000 } |
| |
| # these values area also used for sorting |
| sub NEED_SMSG () { 1 } |
| sub NEED_BLOB () { NEED_SMSG|2 } |
| sub CRLF_BREF () { 4 } |
| sub EML_HDR () { 8 } |
| sub CRLF_HDR () { 16 } |
| sub EML_BDY () { 32 } |
| sub CRLF_BDY () { 64 } |
| my $OP_EML_NEW = [ EML_HDR - 1, \&op_eml_new ]; |
| my $OP_CRLF_BREF = [ CRLF_BREF, \&op_crlf_bref ]; |
| my $OP_CRLF_HDR = [ CRLF_HDR, \&op_crlf_hdr ]; |
| my $OP_CRLF_BDY = [ CRLF_BDY, \&op_crlf_bdy ]; |
| |
| my %FETCH_NEED = ( |
| 'BODY[HEADER]' => [ NEED_BLOB|EML_HDR|CRLF_HDR, \&emit_rfc822_header ], |
| 'BODY[TEXT]' => [ NEED_BLOB|EML_BDY|CRLF_BDY, \&emit_rfc822_text ], |
| 'BODY[]' => [ NEED_BLOB|CRLF_BREF, \&emit_rfc822 ], |
| 'RFC822.HEADER' => [ NEED_BLOB|EML_HDR|CRLF_HDR, \&emit_rfc822_header ], |
| 'RFC822.TEXT' => [ NEED_BLOB|EML_BDY|CRLF_BDY, \&emit_rfc822_text ], |
| 'RFC822.SIZE' => [ NEED_SMSG, \&emit_rfc822_size ], |
| RFC822 => [ NEED_BLOB|CRLF_BREF, \&emit_rfc822 ], |
| BODY => [ NEED_BLOB|EML_HDR|EML_BDY, \&emit_body ], |
| BODYSTRUCTURE => [ NEED_BLOB|EML_HDR|EML_BDY, \&emit_bodystructure ], |
| ENVELOPE => [ NEED_BLOB|EML_HDR, \&emit_envelope ], |
| FLAGS => [ 0, \&emit_flags ], |
| INTERNALDATE => [ NEED_SMSG, \&emit_internaldate ], |
| ); |
| my %FETCH_ATT = map { $_ => [ $_ ] } keys %FETCH_NEED; |
| |
| # aliases (RFC 3501 section 6.4.5) |
| $FETCH_ATT{FAST} = [ qw(FLAGS INTERNALDATE RFC822.SIZE) ]; |
| $FETCH_ATT{ALL} = [ @{$FETCH_ATT{FAST}}, 'ENVELOPE' ]; |
| $FETCH_ATT{FULL} = [ @{$FETCH_ATT{ALL}}, 'BODY' ]; |
| |
| for my $att (keys %FETCH_ATT) { |
| my %h = map { $_ => $FETCH_NEED{$_} } @{$FETCH_ATT{$att}}; |
| $FETCH_ATT{$att} = \%h; |
| } |
| undef %FETCH_NEED; |
| |
| my $valid_range = '[0-9]+|[0-9]+:[0-9]+|[0-9]+:\*|\*'; |
| $valid_range = qr/\A(?:$valid_range)(?:,(?:$valid_range))*\z/; |
| |
| sub do_greet { |
| my ($self) = @_; |
| my $capa = capa($self); |
| $self->write(\"* OK [$capa] public-inbox-imapd ready\r\n"); |
| } |
| |
| sub new { |
| my (undef, $sock, $imapd) = @_; |
| (bless { imapd => $imapd }, 'PublicInbox::IMAP_preauth')->greet($sock) |
| } |
| |
| sub logged_in { 1 } |
| |
| sub capa ($) { |
| my ($self) = @_; |
| |
| # dovecot advertises IDLE pre-login; perhaps because some clients |
| # depend on it, so we'll do the same |
| my $capa = 'CAPABILITY IMAP4rev1 IDLE'; |
| if ($self->logged_in) { |
| $capa .= ' COMPRESS=DEFLATE'; |
| } else { |
| if (!($self->{sock} // $self)->can('accept_SSL') && |
| $self->{imapd}->{ssl_ctx_opt}) { |
| $capa .= ' STARTTLS'; |
| } |
| $capa .= ' AUTH=ANONYMOUS'; |
| } |
| } |
| |
| sub login_success ($$) { |
| my ($self, $tag) = @_; |
| bless $self, 'PublicInbox::IMAP'; |
| my $capa = capa($self); |
| "$tag OK [$capa] Logged in\r\n"; |
| } |
| |
| sub auth_challenge_ok ($) { |
| my ($self) = @_; |
| my $tag = delete($self->{-login_tag}) or return; |
| $self->{anon} = 1; |
| login_success($self, $tag); |
| } |
| |
| sub cmd_login ($$$$) { |
| my ($self, $tag) = @_; # ignore ($user, $password) = ($_[2], $_[3]) |
| login_success($self, $tag); |
| } |
| |
| sub cmd_close ($$) { |
| my ($self, $tag) = @_; |
| delete @$self{qw(uid_base uo2m)}; |
| delete $self->{ibx} ? "$tag OK Close done\r\n" |
| : "$tag BAD No mailbox\r\n"; |
| } |
| |
| sub cmd_logout ($$) { |
| my ($self, $tag) = @_; |
| delete $self->{-idle_tag}; |
| $self->write(\"* BYE logging out\r\n$tag OK Logout done\r\n"); |
| $self->shutdn; # PublicInbox::DS::shutdn |
| undef; |
| } |
| |
| sub cmd_authenticate ($$$) { |
| my ($self, $tag) = @_; # $method = $_[2], should be "ANONYMOUS" |
| $self->{-login_tag} = $tag; |
| "+ \r\n"; # challenge |
| } |
| |
| sub cmd_capability ($$) { |
| my ($self, $tag) = @_; |
| '* '.capa($self)."\r\n$tag OK Capability done\r\n"; |
| } |
| |
| # uo2m: UID Offset to MSN, this is an arrayref by default, |
| # but uo2m_hibernate can compact and deduplicate it |
| sub uo2m_ary_new ($;$) { |
| my ($self, $exists) = @_; |
| my $ub = $self->{uid_base}; |
| my $uids = $self->{ibx}->over(1)->uid_range($ub + 1, $ub + UID_SLICE); |
| |
| # convert UIDs to offsets from {base} |
| my @tmp; # [$UID_OFFSET] => $MSN |
| my $msn = 0; |
| ++$ub; |
| $tmp[$_ - $ub] = ++$msn for @$uids; |
| $$exists = $msn if $exists; |
| \@tmp; |
| } |
| |
| # changes UID-offset-to-MSN mapping into a deduplicated scalar: |
| # uint16_t uo2m[UID_SLICE]. |
| # May be swapped out for idle clients if THP is disabled. |
| sub uo2m_hibernate ($) { |
| my ($self) = @_; |
| ref(my $uo2m = $self->{uo2m}) or return; |
| my %dedupe = ( uo2m_pack($uo2m) => undef ); |
| $self->{uo2m} = (keys(%dedupe))[0]; |
| undef; |
| } |
| |
| sub uo2m_last_uid ($) { |
| my ($self) = @_; |
| defined(my $uo2m = $self->{uo2m}) or die 'BUG: uo2m_last_uid w/o {uo2m}'; |
| (ref($uo2m) ? @$uo2m : (length($uo2m) >> 1)) + $self->{uid_base}; |
| } |
| |
| sub uo2m_pack ($) { |
| # $_[0] is an arrayref of MSNs, it may have undef gaps if there |
| # are gaps in the corresponding UIDs: [ msn1, msn2, undef, msn3 ] |
| no warnings 'uninitialized'; |
| pack('S*', @{$_[0]}); |
| } |
| |
| # extend {uo2m} to account for new messages which arrived since |
| # {uo2m} was created. |
| sub uo2m_extend ($$;$) { |
| my ($self, $new_uid_max) = @_; |
| defined(my $uo2m = $self->{uo2m}) or |
| return($self->{uo2m} = uo2m_ary_new($self)); |
| my $beg = uo2m_last_uid($self); # last UID we've learned |
| return $uo2m if $beg >= $new_uid_max; # fast path |
| |
| # need to extend the current range: |
| my $base = $self->{uid_base}; |
| ++$beg; |
| my $uids = $self->{ibx}->over(1)->uid_range($beg, $base + UID_SLICE); |
| return $uo2m if !scalar(@$uids); |
| my @tmp; # [$UID_OFFSET] => $MSN |
| my $write_method = $_[2] // 'msg_more'; |
| if (ref($uo2m)) { |
| my $msn = $uo2m->[-1]; |
| $tmp[$_ - $beg] = ++$msn for @$uids; |
| $self->$write_method("* $msn EXISTS\r\n"); |
| push @$uo2m, @tmp; |
| $uo2m; |
| } else { |
| my $msn = unpack('S', substr($uo2m, -2, 2)); |
| $tmp[$_ - $beg] = ++$msn for @$uids; |
| $self->$write_method("* $msn EXISTS\r\n"); |
| $uo2m .= uo2m_pack(\@tmp); |
| my %dedupe = ($uo2m => undef); |
| $self->{uo2m} = (keys %dedupe)[0]; |
| } |
| } |
| |
| sub cmd_noop ($$) { |
| my ($self, $tag) = @_; |
| defined($self->{uid_base}) and |
| uo2m_extend($self, $self->{uid_base} + UID_SLICE); |
| \"$tag OK Noop done\r\n"; |
| } |
| |
| # the flexible version which works on scalars and array refs. |
| # Must call uo2m_extend before this |
| sub uid2msn ($$) { |
| my ($self, $uid) = @_; |
| my $uo2m = $self->{uo2m}; |
| my $off = $uid - $self->{uid_base} - 1; |
| ref($uo2m) ? $uo2m->[$off] : unpack('S', substr($uo2m, $off << 1, 2)); |
| } |
| |
| # returns an arrayref of UIDs, so MSNs can be translated to UIDs via: |
| # $msn2uid->[$MSN-1] => $UID. The result of this is always ephemeral |
| # and does not live beyond the event loop. |
| sub msn2uid ($) { |
| my ($self) = @_; |
| my $base = $self->{uid_base}; |
| my $uo2m = uo2m_extend($self, $base + UID_SLICE); |
| $uo2m = [ unpack('S*', $uo2m) ] if !ref($uo2m); |
| |
| my $uo = 0; |
| my @msn2uid; |
| for my $msn (@$uo2m) { |
| ++$uo; |
| $msn2uid[$msn - 1] = $uo + $base if $msn; |
| } |
| \@msn2uid; |
| } |
| |
| # converts a set of message sequence numbers in requests to UIDs: |
| sub msn_to_uid_range ($$) { |
| my $msn2uid = $_[0]; |
| $_[1] =~ s!([0-9]+)!$msn2uid->[$1 - 1] // ($msn2uid->[-1] // 0 + 1)!sge; |
| } |
| |
| # called by PublicInbox::InboxIdle |
| sub on_inbox_unlock { |
| my ($self, $ibx) = @_; |
| my $uid_end = $self->{uid_base} + UID_SLICE; |
| uo2m_extend($self, $uid_end, 'write'); |
| my $new = uo2m_last_uid($self); |
| if ($new == $uid_end) { # max exceeded $uid_end |
| # continue idling w/o inotify |
| my $sock = $self->{sock} or return; |
| $ibx->unsubscribe_unlock(fileno($sock)); |
| } |
| } |
| |
| # called every minute or so by PublicInbox::DS::later |
| my $IDLERS; # fileno($obj->{sock}) => PublicInbox::IMAP |
| sub idle_tick_all { |
| my $old = $IDLERS; |
| $IDLERS = undef; |
| for my $i (values %$old) { |
| next if ($i->{wbuf} || !exists($i->{-idle_tag})); |
| $IDLERS->{fileno($i->{sock})} = $i; |
| $i->write(\"* OK Still here\r\n"); |
| } |
| $IDLERS and |
| PublicInbox::DS::add_uniq_timer('idle', 60, \&idle_tick_all); |
| } |
| |
| sub cmd_idle ($$) { |
| my ($self, $tag) = @_; |
| # IDLE seems allowed by dovecot w/o a mailbox selected *shrug* |
| my $ibx = $self->{ibx} or return "$tag BAD no mailbox selected\r\n"; |
| my $uid_end = $self->{uid_base} + UID_SLICE; |
| uo2m_extend($self, $uid_end); |
| my $sock = $self->{sock} or return; |
| my $fd = fileno($sock); |
| $self->{-idle_tag} = $tag; |
| # only do inotify on most recent slice |
| if ($ibx->over(1)->max < $uid_end) { |
| $ibx->subscribe_unlock($fd, $self); |
| $self->{imapd}->idler_start; |
| } |
| PublicInbox::DS::add_uniq_timer('idle', 60, \&idle_tick_all); |
| $IDLERS->{$fd} = $self; |
| \"+ idling\r\n" |
| } |
| |
| sub stop_idle ($$) { |
| my ($self, $ibx) = @_; |
| my $sock = $self->{sock} or return; |
| my $fd = fileno($sock); |
| delete $IDLERS->{$fd}; |
| $ibx->unsubscribe_unlock($fd); |
| } |
| |
| sub idle_done ($$) { |
| my ($self, $tag) = @_; # $tag is "DONE" (case-insensitive) |
| defined(my $idle_tag = delete $self->{-idle_tag}) or |
| return "$tag BAD not idle\r\n"; |
| my $ibx = $self->{ibx} or do { |
| warn "BUG: idle_tag set w/o inbox"; |
| return "$tag BAD internal bug\r\n"; |
| }; |
| stop_idle($self, $ibx); |
| "$idle_tag OK Idle done\r\n"; |
| } |
| |
| sub ensure_slices_exist ($$) { |
| my ($imapd, $ibx) = @_; |
| my $mb_top = $ibx->{newsgroup} // return; |
| my $mailboxes = $imapd->{mailboxes}; |
| my $list = $imapd->{mailboxlist}; # may be undef, just autoviv + noop |
| for (my $i = int($ibx->art_max/UID_SLICE); $i >= 0; --$i) { |
| my $sub_mailbox = "$mb_top.$i"; |
| last if exists $mailboxes->{$sub_mailbox}; |
| $mailboxes->{$sub_mailbox} = $ibx; |
| $sub_mailbox =~ s/\Ainbox\./INBOX./i; # more familiar to users |
| push @$list, qq[* LIST (\\HasNoChildren) "." $sub_mailbox\r\n] |
| } |
| } |
| |
| sub inbox_lookup ($$;$) { |
| my ($self, $mailbox, $examine) = @_; |
| my ($ibx, $exists, $uidmax, $uid_base) = (undef, 0, 0, 0); |
| $mailbox = lc $mailbox; |
| $ibx = $self->{imapd}->{mailboxes}->{$mailbox} or return; |
| my $over = $ibx->over(1); |
| if ($over != $ibx) { # not a dummy |
| $mailbox =~ /\.([0-9]+)\z/ or |
| die "BUG: unexpected dummy mailbox: $mailbox\n"; |
| $uid_base = $1 * UID_SLICE; |
| |
| $uidmax = $ibx->mm->num_highwater // 0; |
| if ($examine) { |
| $self->{uid_base} = $uid_base; |
| $self->{ibx} = $ibx; |
| $self->{uo2m} = uo2m_ary_new($self, \$exists); |
| } else { |
| my $uid_end = $uid_base + UID_SLICE; |
| $exists = $over->imap_exists($uid_base, $uid_end); |
| } |
| delete $ibx->{-art_max}; |
| ensure_slices_exist($self->{imapd}, $ibx); |
| } else { |
| if ($examine) { |
| $self->{uid_base} = $uid_base; |
| $self->{ibx} = $ibx; |
| delete $self->{uo2m}; |
| } |
| # if "INBOX.foo.bar" is selected and "INBOX.foo.bar.0", |
| # check for new UID ranges (e.g. "INBOX.foo.bar.1") |
| if (my $ibx = $self->{imapd}->{mailboxes}->{"$mailbox.0"}) { |
| delete $ibx->{-art_max}; |
| ensure_slices_exist($self->{imapd}, $ibx); |
| } |
| } |
| ($ibx, $exists, $uidmax + 1, $uid_base); |
| } |
| |
| sub cmd_examine ($$$) { |
| my ($self, $tag, $mailbox) = @_; |
| # XXX: do we need this? RFC 5162/7162 |
| my $ret = $self->{ibx} ? "* OK [CLOSED] previous closed\r\n" : ''; |
| my ($ibx, $exists, $uidnext, $base) = inbox_lookup($self, $mailbox, 1); |
| return "$tag NO Mailbox doesn't exist: $mailbox\r\n" if !$ibx; |
| $ret .= <<EOF; |
| * $exists EXISTS\r |
| * $exists RECENT\r |
| * FLAGS (\\Seen)\r |
| * OK [PERMANENTFLAGS ()] Read-only mailbox\r |
| * OK [UNSEEN $exists]\r |
| * OK [UIDNEXT $uidnext]\r |
| * OK [UIDVALIDITY $ibx->{uidvalidity}]\r |
| $tag OK [READ-ONLY] EXAMINE/SELECT done\r |
| EOF |
| } |
| |
| sub _esc ($) { |
| my ($v) = @_; |
| if (!defined($v)) { |
| 'NIL'; |
| } elsif ($v =~ /[{"\r\n%*\\\[]/) { # literal string |
| utf8::encode($v); |
| '{' . length($v) . "}\r\n" . $v; |
| } else { # quoted string |
| utf8::encode($v); |
| qq{"$v"} |
| } |
| } |
| |
| sub addr_envelope ($$;$) { |
| my ($eml, $x, $y) = @_; |
| my $v = $eml->header_raw($x) // |
| ($y ? $eml->header_raw($y) : undef) // return 'NIL'; |
| |
| my @x = PublicInbox::Address::objects($v) or return 'NIL'; |
| '(' . join('', |
| map { '(' . join(' ', |
| _esc($_->name), 'NIL', |
| _esc($_->user), _esc($_->host) |
| ) . ')' |
| } @x) . |
| ')'; |
| } |
| |
| sub eml_envelope ($) { |
| my ($eml) = @_; |
| '(' . join(' ', |
| _esc($eml->header_raw('Date')), |
| _esc($eml->header_raw('Subject')), |
| addr_envelope($eml, 'From'), |
| addr_envelope($eml, 'Sender', 'From'), |
| addr_envelope($eml, 'Reply-To', 'From'), |
| addr_envelope($eml, 'To'), |
| addr_envelope($eml, 'Cc'), |
| addr_envelope($eml, 'Bcc'), |
| _esc($eml->header_raw('In-Reply-To')), |
| _esc($eml->header_raw('Message-ID')), |
| ) . ')'; |
| } |
| |
| sub _esc_hash ($) { |
| my ($hash) = @_; |
| if ($hash && scalar keys %$hash) { |
| $hash = [ %$hash ]; # flatten hash into 1-dimensional array |
| '(' . join(' ', map { _esc($_) } @$hash) . ')'; |
| } else { |
| 'NIL'; |
| } |
| } |
| |
| sub body_disposition ($) { |
| my ($eml) = @_; |
| my $cd = $eml->header_raw('Content-Disposition') or return 'NIL'; |
| $cd = parse_content_disposition($cd); |
| my $buf = '('._esc($cd->{type}); |
| $buf .= ' ' . _esc_hash($cd->{attributes}); |
| $buf .= ')'; |
| } |
| |
| sub body_leaf ($$;$) { |
| my ($eml, $structure, $hold) = @_; |
| my $buf = ''; |
| $eml->{is_submsg} and # parent was a message/(rfc822|news|global) |
| $buf .= eml_envelope($eml). ' '; |
| my $ct = $eml->ct; |
| $buf .= '('._esc($ct->{type}).' '; |
| $buf .= _esc($ct->{subtype}); |
| $buf .= ' ' . _esc_hash($ct->{attributes}); |
| $buf .= ' ' . _esc($eml->header_raw('Content-ID')); |
| $buf .= ' ' . _esc($eml->header_raw('Content-Description')); |
| my $cte = $eml->header_raw('Content-Transfer-Encoding') // '7bit'; |
| $buf .= ' ' . _esc($cte); |
| $buf .= ' ' . $eml->{imap_body_len}; |
| $buf .= ' '.($eml->body_raw =~ tr/\n/\n/) if lc($ct->{type}) eq 'text'; |
| |
| # for message/(rfc822|global|news), $hold[0] should have envelope |
| $buf .= ' ' . (@$hold ? join('', @$hold) : 'NIL') if $hold; |
| |
| if ($structure) { |
| $buf .= ' '._esc($eml->header_raw('Content-MD5')); |
| $buf .= ' '. body_disposition($eml); |
| $buf .= ' '._esc($eml->header_raw('Content-Language')); |
| $buf .= ' '._esc($eml->header_raw('Content-Location')); |
| } |
| $buf .= ')'; |
| } |
| |
| sub body_parent ($$$) { |
| my ($eml, $structure, $hold) = @_; |
| my $ct = $eml->ct; |
| my $type = lc($ct->{type}); |
| if ($type eq 'multipart') { |
| my $buf = '('; |
| $buf .= @$hold ? join('', @$hold) : 'NIL'; |
| $buf .= ' '._esc($ct->{subtype}); |
| if ($structure) { |
| $buf .= ' '._esc_hash($ct->{attributes}); |
| $buf .= ' '.body_disposition($eml); |
| $buf .= ' '._esc($eml->header_raw('Content-Language')); |
| $buf .= ' '._esc($eml->header_raw('Content-Location')); |
| } |
| $buf .= ')'; |
| @$hold = ($buf); |
| } else { # message/(rfc822|global|news) |
| @$hold = (body_leaf($eml, $structure, $hold)); |
| } |
| } |
| |
| # this is gross, but we need to process the parent part AFTER |
| # the child parts are done |
| sub bodystructure_prep { |
| my ($p, $q) = @_; |
| my ($eml, $depth) = @$p; # ignore idx |
| # set length here, as $eml->{bdy} gets deleted for message/rfc822 |
| $eml->{imap_body_len} = length($eml->body_raw); |
| push @$q, $eml, $depth; |
| } |
| |
| # for FETCH BODY and FETCH BODYSTRUCTURE |
| sub fetch_body ($;$) { |
| my ($eml, $structure) = @_; |
| my @q; |
| $eml->each_part(\&bodystructure_prep, \@q, 0, 1); |
| my $cur_depth = 0; |
| my @hold; |
| do { |
| my ($part, $depth) = splice(@q, -2); |
| my $is_mp_parent = $depth == ($cur_depth - 1); |
| $cur_depth = $depth; |
| |
| if ($is_mp_parent) { |
| body_parent($part, $structure, \@hold); |
| } else { |
| unshift @hold, body_leaf($part, $structure); |
| } |
| } while (@q); |
| join('', @hold); |
| } |
| |
| sub fetch_run_ops { |
| my ($self, $smsg, $bref, $ops, $partial) = @_; |
| my $uid = $smsg->{num}; |
| $self->msg_more('* '.uid2msn($self, $uid)." FETCH (UID $uid"); |
| my ($eml, $k); |
| for (my $i = 0; $i < @$ops;) { |
| $k = $ops->[$i++]; |
| $ops->[$i++]->($self, $k, $smsg, $bref, $eml); |
| } |
| partial_emit($self, $partial, $eml) if $partial; |
| $self->msg_more(")\r\n"); |
| } |
| |
| sub requeue { # overrides PublicInbox::DS::requeue |
| my ($self) = @_; |
| if ($self->{anon}) { # AUTH=ANONYMOUS gets high priority |
| $self->SUPER::requeue; |
| } else { # low priority |
| push(@{$self->{imapd}->{-authed_q}}, $self) == 1 and |
| PublicInbox::DS::requeue($self->{imapd}); |
| } |
| } |
| |
| sub fetch_blob_cb { # called by git->cat_async via ibx_async_cat |
| my ($bref, $oid, $type, $size, $fetch_arg) = @_; |
| my ($self, undef, $msgs, $range_info, $ops, $partial) = @$fetch_arg; |
| my $ibx = $self->{ibx} or return $self->close; # client disconnected |
| my $smsg = shift @$msgs or die 'BUG: no smsg'; |
| if (!defined($type)) { |
| warn "E: git aborted on $oid / $smsg->{blob} $ibx->{inboxdir}"; |
| return $self->close; |
| } elsif ($type ne 'blob') { |
| # it's possible to have TOCTOU if an admin runs |
| # public-inbox-(edit|purge), just move onto the next message |
| warn "E: $smsg->{blob} $type in $ibx->{inboxdir}\n"; |
| return $self->requeue_once; |
| } |
| $smsg->{blob} eq $oid or die "BUG: $smsg->{blob} != $oid"; |
| my $pre; |
| ($self->{anon} && !$self->{wbuf} && $msgs->[0]) and |
| $pre = ibx_async_prefetch($ibx, $msgs->[0]->{blob}, |
| \&fetch_blob_cb, $fetch_arg); |
| fetch_run_ops($self, $smsg, $bref, $ops, $partial); |
| $pre ? $self->dflush : $self->requeue_once; |
| } |
| |
| sub emit_rfc822 { |
| my ($self, $k, undef, $bref) = @_; |
| $self->msg_more(" $k {" . length($$bref)."}\r\n", $$bref); |
| } |
| |
| # Mail::IMAPClient::message_string cares about this by default, |
| # (->Ignoresizeerrors attribute). Admins are encouraged to |
| # --reindex for IMAP support, anyways. |
| sub emit_rfc822_size { |
| my ($self, $k, $smsg) = @_; |
| $self->msg_more(' RFC822.SIZE ' . $smsg->{bytes}); |
| } |
| |
| sub emit_internaldate { |
| my ($self, undef, $smsg) = @_; |
| $self->msg_more(' INTERNALDATE "'.$smsg->internaldate.'"'); |
| } |
| |
| sub emit_flags { $_[0]->msg_more(' FLAGS ()') } |
| |
| sub emit_envelope { |
| my ($self, undef, undef, undef, $eml) = @_; |
| $self->msg_more(' ENVELOPE ', eml_envelope($eml)); |
| } |
| |
| sub emit_rfc822_header { |
| my ($self, $k, undef, undef, $eml) = @_; |
| $self->msg_more(" $k {".length(${$eml->{hdr}})."}\r\n", ${$eml->{hdr}}); |
| } |
| |
| # n.b. this is sorted to be after any emit_eml_new ops |
| sub emit_rfc822_text { |
| my ($self, $k, undef, $bref) = @_; |
| $self->msg_more(" $k {".length($$bref)."}\r\n", $$bref); |
| } |
| |
| sub emit_bodystructure { |
| my ($self, undef, undef, undef, $eml) = @_; |
| $self->msg_more(' BODYSTRUCTURE '.fetch_body($eml, 1)); |
| } |
| |
| sub emit_body { |
| my ($self, undef, undef, undef, $eml) = @_; |
| $self->msg_more(' BODY '.fetch_body($eml)); |
| } |
| |
| # set $eml once ($_[4] == $eml, $_[3] == $bref) |
| sub op_eml_new { $_[4] = PublicInbox::Eml->new($_[3]) } |
| |
| # s/From / fixes old bug from import (pre-a0c07cba0e5d8b6a) |
| sub to_crlf_full { |
| ${$_[0]} =~ s/(?<!\r)\n/\r\n/sg; |
| PublicInbox::Eml::strip_from(${$_[0]}); |
| } |
| |
| sub op_crlf_bref { to_crlf_full($_[3]) } |
| |
| sub op_crlf_hdr { to_crlf_full($_[4]->{hdr}) } |
| |
| sub op_crlf_bdy { ${$_[4]->{bdy}} =~ s/(?<!\r)\n/\r\n/sg if $_[4]->{bdy} } |
| |
| sub uid_clamp ($$$) { |
| my ($self, $beg, $end) = @_; |
| my $uid_min = $self->{uid_base} + 1; |
| my $uid_end = $uid_min + UID_SLICE - 1; |
| $$beg = $uid_min if $$beg < $uid_min; |
| $$end = $uid_end if $$end > $uid_end; |
| } |
| |
| sub range_step ($$) { |
| my ($self, $range_csv) = @_; |
| my ($beg, $end, $range); |
| if ($$range_csv =~ s/\A([^,]+),//) { |
| $range = $1; |
| } else { |
| $range = $$range_csv; |
| $$range_csv = undef; |
| } |
| my $uid_base = $self->{uid_base}; |
| my $uid_end = $uid_base + UID_SLICE; |
| if ($range =~ /\A([0-9]+):([0-9]+)\z/) { |
| ($beg, $end) = ($1 + 0, $2 + 0); |
| uid_clamp($self, \$beg, \$end); |
| } elsif ($range =~ /\A([0-9]+):\*\z/) { |
| $beg = $1 + 0; |
| $end = $self->{ibx}->over(1)->max; |
| $end = $uid_end if $end > $uid_end; |
| $beg = $end if $beg > $end; |
| uid_clamp($self, \$beg, \$end); |
| } elsif ($range =~ /\A[0-9]+\z/) { |
| $beg = $end = $range + 0; |
| # just let the caller do an out-of-range query if a single |
| # UID is out-of-range |
| ++$beg if ($beg <= $uid_base || $end > $uid_end); |
| } elsif ($range eq '*') { |
| $beg = $end = $self->{ibx}->over(1)->max; |
| uid_clamp($self, \$beg, \$end); |
| } else { |
| return 'BAD fetch range'; |
| } |
| [ $beg, $end, $$range_csv ]; |
| } |
| |
| sub refill_range ($$$) { |
| my ($self, $msgs, $range_info) = @_; |
| my ($beg, $end, $range_csv) = @$range_info; |
| if (scalar(@$msgs = @{$self->{ibx}->over(1)->query_xover($beg, $end)})){ |
| $range_info->[0] = $msgs->[-1]->{num} + 1; |
| return; |
| } |
| return 'OK Fetch done' if !$range_csv; |
| my $next_range = range_step($self, \$range_csv); |
| return $next_range if !ref($next_range); # error |
| @$range_info = @$next_range; |
| undef; # keep looping |
| } |
| |
| sub fetch_blob { # long_response |
| my ($self, $tag, $msgs, $range_info, $ops, $partial) = @_; |
| while (!@$msgs) { # rare |
| if (my $end = refill_range($self, $msgs, $range_info)) { |
| $self->write(\"$tag $end\r\n"); |
| return; |
| } |
| } |
| uo2m_extend($self, $msgs->[-1]->{num}); |
| ibx_async_cat($self->{ibx}, $msgs->[0]->{blob}, |
| \&fetch_blob_cb, \@_); |
| } |
| |
| sub fetch_smsg { # long_response |
| my ($self, $tag, $msgs, $range_info, $ops) = @_; |
| while (!@$msgs) { # rare |
| if (my $end = refill_range($self, $msgs, $range_info)) { |
| $self->write(\"$tag $end\r\n"); |
| return; |
| } |
| } |
| uo2m_extend($self, $msgs->[-1]->{num}); |
| fetch_run_ops($self, $_, undef, $ops) for @$msgs; |
| @$msgs = (); |
| 1; # more |
| } |
| |
| sub refill_uids ($$$;$) { |
| my ($self, $uids, $range_info, $sql) = @_; |
| my ($beg, $end, $range_csv) = @$range_info; |
| my $over = $self->{ibx}->over(1); |
| while (1) { |
| if (scalar(@$uids = @{$over->uid_range($beg, $end, $sql)})) { |
| $range_info->[0] = $uids->[-1] + 1; # update $beg |
| return; |
| } elsif (!$range_csv) { |
| return 0; |
| } else { |
| my $next_range = range_step($self, \$range_csv); |
| return $next_range if !ref($next_range); # error |
| ($beg, $end, $range_csv) = @$range_info = @$next_range; |
| # continue looping |
| } |
| } |
| } |
| |
| sub fetch_uid { # long_response |
| my ($self, $tag, $uids, $range_info, $ops) = @_; |
| if (defined(my $err = refill_uids($self, $uids, $range_info))) { |
| $err ||= 'OK Fetch done'; |
| $self->write("$tag $err\r\n"); |
| return; |
| } |
| my $adj = $self->{uid_base} + 1; |
| my $uo2m = uo2m_extend($self, $uids->[-1]); |
| $uo2m = [ unpack('S*', $uo2m) ] if !ref($uo2m); |
| my ($i, $k); |
| for (@$uids) { |
| $self->msg_more("* $uo2m->[$_ - $adj] FETCH (UID $_"); |
| for ($i = 0; $i < @$ops;) { |
| $k = $ops->[$i++]; |
| $ops->[$i++]->($self, $k); |
| } |
| $self->msg_more(")\r\n"); |
| } |
| @$uids = (); |
| 1; # more |
| } |
| |
| sub cmd_status ($$$;@) { |
| my ($self, $tag, $mailbox, @items) = @_; |
| return "$tag BAD no items\r\n" if !scalar(@items); |
| ($items[0] !~ s/\A\(//s || $items[-1] !~ s/\)\z//s) and |
| return "$tag BAD invalid args\r\n"; |
| my ($ibx, $exists, $uidnext) = inbox_lookup($self, $mailbox); |
| return "$tag NO Mailbox doesn't exist: $mailbox\r\n" if !$ibx; |
| my @it; |
| for my $it (@items) { |
| $it = uc($it); |
| push @it, $it; |
| if ($it =~ /\A(?:MESSAGES|UNSEEN|RECENT)\z/) { |
| push @it, $exists; |
| } elsif ($it eq 'UIDNEXT') { |
| push @it, $uidnext; |
| } elsif ($it eq 'UIDVALIDITY') { |
| push @it, $ibx->{uidvalidity}; |
| } else { |
| return "$tag BAD invalid item\r\n"; |
| } |
| } |
| return "$tag BAD no items\r\n" if !@it; |
| "* STATUS $mailbox (".join(' ', @it).")\r\n" . |
| "$tag OK Status done\r\n"; |
| } |
| |
| my %patmap = ('*' => '.*', '%' => '[^\.]*'); |
| sub cmd_list ($$$$) { |
| my ($self, $tag, $refname, $wildcard) = @_; |
| my $l = $self->{imapd}->{mailboxlist}; |
| if ($refname eq '' && $wildcard eq '') { |
| # request for hierarchy delimiter |
| $l = [ qq[* LIST (\\Noselect) "." ""\r\n] ]; |
| } elsif ($refname ne '' || $wildcard ne '*') { |
| $wildcard =~ s!([^a-z0-9_])!$patmap{$1} // "\Q$1"!egi; |
| $l = [ grep(/ \Q$refname\E$wildcard\r\n\z/is, @$l) ]; |
| } |
| \(join('', @$l, "$tag OK List done\r\n")); |
| } |
| |
| sub cmd_lsub ($$$$) { |
| my (undef, $tag) = @_; # same args as cmd_list |
| "$tag OK Lsub done\r\n"; |
| } |
| |
| sub eml_index_offs_i { # PublicInbox::Eml::each_part callback |
| my ($p, $all) = @_; |
| my ($eml, undef, $idx) = @$p; |
| if ($idx && lc($eml->ct->{type}) eq 'multipart') { |
| $eml->{imap_bdy} = $eml->{bdy} // \''; |
| } |
| $all->{$idx} = $eml; # $idx => Eml |
| } |
| |
| # prepares an index for BODY[$SECTION_IDX] fetches |
| sub eml_body_idx ($$) { |
| my ($eml, $section_idx) = @_; |
| my $idx = $eml->{imap_all_parts} // do { |
| my $all = {}; |
| $eml->each_part(\&eml_index_offs_i, $all, 0, 1); |
| # top-level of multipart, BODY[0] not allowed (nz-number) |
| delete $all->{0}; |
| $eml->{imap_all_parts} = $all; |
| }; |
| $idx->{$section_idx}; |
| } |
| |
| # BODY[($SECTION_IDX)?(.$SECTION_NAME)?]<$offset.$bytes> |
| sub partial_body { |
| my ($eml, $section_idx, $section_name) = @_; |
| if (defined $section_idx) { |
| $eml = eml_body_idx($eml, $section_idx) or return; |
| } |
| if (defined $section_name) { |
| if ($section_name eq 'MIME') { |
| # RFC 3501 6.4.5 states: |
| # The MIME part specifier MUST be prefixed |
| # by one or more numeric part specifiers |
| return unless defined $section_idx; |
| return $eml->header_obj->as_string . "\r\n"; |
| } |
| my $bdy = $eml->{bdy} // $eml->{imap_bdy} // \''; |
| $eml = PublicInbox::Eml->new($$bdy); |
| if ($section_name eq 'TEXT') { |
| return $eml->body_raw; |
| } elsif ($section_name eq 'HEADER') { |
| return $eml->header_obj->as_string . "\r\n"; |
| } else { |
| die "BUG: bad section_name=$section_name"; |
| } |
| } |
| ${$eml->{bdy} // $eml->{imap_bdy} // \''}; |
| } |
| |
| # similar to what's in PublicInbox::Eml::re_memo, but doesn't memoize |
| # to avoid OOM with malicious users |
| sub hdrs_regexp ($) { |
| my ($hdrs) = @_; |
| my $names = join('|', map { "\Q$_" } split(/[ \t]+/, $hdrs)); |
| qr/^(?:$names):[ \t]*[^\n]*\r?\n # 1st line |
| # continuation lines: |
| (?:[^:\n]*?[ \t]+[^\n]*\r?\n)* |
| /ismx; |
| } |
| |
| # BODY[($SECTION_IDX.)?HEADER.FIELDS.NOT ($HDRS)]<$offset.$bytes> |
| sub partial_hdr_not { |
| my ($eml, $section_idx, $hdrs_re) = @_; |
| if (defined $section_idx) { |
| $eml = eml_body_idx($eml, $section_idx) or return; |
| } |
| my $str = $eml->header_obj->as_string; |
| $str =~ s/$hdrs_re//g; |
| $str =~ s/(?<!\r)\n/\r\n/sg; |
| $str .= "\r\n"; |
| } |
| |
| # BODY[($SECTION_IDX.)?HEADER.FIELDS ($HDRS)]<$offset.$bytes> |
| sub partial_hdr_get { |
| my ($eml, $section_idx, $hdrs_re) = @_; |
| if (defined $section_idx) { |
| $eml = eml_body_idx($eml, $section_idx) or return; |
| } |
| my $str = $eml->header_obj->as_string; |
| $str = join('', ($str =~ m/($hdrs_re)/g)); |
| $str =~ s/(?<!\r)\n/\r\n/sg; |
| $str .= "\r\n"; |
| } |
| |
| sub partial_prepare ($$$$) { |
| my ($need, $partial, $want, $att) = @_; |
| |
| # recombine [ "BODY[1.HEADER.FIELDS", "(foo", "bar)]" ] |
| # back to: "BODY[1.HEADER.FIELDS (foo bar)]" |
| return unless $att =~ /\ABODY\[/s; |
| until (rindex($att, ']') >= 0) { |
| my $next = shift @$want or return; |
| $att .= ' ' . uc($next); |
| } |
| if ($att =~ /\ABODY\[([0-9]+(?:\.[0-9]+)*)? # 1 - section_idx |
| (?:\.(HEADER|MIME|TEXT))? # 2 - section_name |
| \](?:<([0-9]+)(?:\.([0-9]+))?>)?\z/sx) { # 3, 4 |
| $partial->{$att} = [ \&partial_body, $1, $2, $3, $4 ]; |
| $$need |= CRLF_BREF|EML_HDR|EML_BDY; |
| } elsif ($att =~ /\ABODY\[(?:([0-9]+(?:\.[0-9]+)*)\.)? # 1 - section_idx |
| (?:HEADER\.FIELDS(\.NOT)?)\x20 # 2 |
| \(([A-Z0-9\-\x20]+)\) # 3 - hdrs |
| \](?:<([0-9]+)(?:\.([0-9]+))?>)?\z/sx) { # 4 5 |
| my $tmp = $partial->{$att} = [ $2 ? \&partial_hdr_not |
| : \&partial_hdr_get, |
| $1, undef, $4, $5 ]; |
| $tmp->[2] = hdrs_regexp($3); |
| |
| # don't emit CRLF_HDR instruction, here, partial_hdr_* |
| # will do CRLF conversion with only the extracted result |
| # and not waste time converting lines we don't care about. |
| $$need |= EML_HDR; |
| } else { |
| undef; |
| } |
| } |
| |
| sub partial_emit ($$$) { |
| my ($self, $partial, $eml) = @_; |
| for (@$partial) { |
| my ($k, $cb, @args) = @$_; |
| my ($offset, $len) = splice(@args, -2); |
| # $cb is partial_body|partial_hdr_get|partial_hdr_not |
| my $str = $cb->($eml, @args) // ''; |
| if (defined $offset) { |
| if (defined $len) { |
| $str = substr($str, $offset, $len); |
| $k =~ s/\.$len>\z/>/ or warn |
| "BUG: unable to remove `.$len>' from `$k'"; |
| } else { |
| $str = substr($str, $offset); |
| $len = length($str); |
| } |
| } else { |
| $len = length($str); |
| } |
| $self->msg_more(" $k {$len}\r\n", $str); |
| } |
| } |
| |
| sub fetch_compile ($) { |
| my ($want) = @_; |
| if ($want->[0] =~ s/\A\(//s) { |
| $want->[-1] =~ s/\)\z//s or return 'BAD no rparen'; |
| } |
| my (%partial, %seen, @op); |
| my $need = 0; |
| while (defined(my $att = shift @$want)) { |
| $att = uc($att); |
| next if $att eq 'UID'; # always returned |
| $att =~ s/\ABODY\.PEEK\[/BODY\[/; # we're read-only |
| my $x = $FETCH_ATT{$att}; |
| if ($x) { |
| while (my ($k, $fl_cb) = each %$x) { |
| next if $seen{$k}++; |
| $need |= $fl_cb->[0]; |
| push @op, [ @$fl_cb, $k ]; |
| } |
| } elsif (!partial_prepare(\$need, \%partial, $want, $att)) { |
| return "BAD param: $att"; |
| } |
| } |
| my @r; |
| |
| # stabilize partial order for consistency and ease-of-debugging: |
| if (scalar keys %partial) { |
| $need |= NEED_BLOB; |
| @{$r[2]} = map { [ $_, @{$partial{$_}} ] } sort keys %partial; |
| } |
| |
| push @op, $OP_EML_NEW if ($need & (EML_HDR|EML_BDY)); |
| |
| # do we need CRLF conversion? |
| if ($need & CRLF_BREF) { |
| push @op, $OP_CRLF_BREF; |
| } elsif (my $crlf = ($need & (CRLF_HDR|CRLF_BDY))) { |
| if ($crlf == (CRLF_HDR|CRLF_BDY)) { |
| push @op, $OP_CRLF_BREF; |
| } elsif ($need & CRLF_HDR) { |
| push @op, $OP_CRLF_HDR; |
| } else { |
| push @op, $OP_CRLF_BDY; |
| } |
| } |
| |
| $r[0] = $need & NEED_BLOB ? \&fetch_blob : |
| ($need & NEED_SMSG ? \&fetch_smsg : \&fetch_uid); |
| |
| # r[1] = [ $key1, $cb1, $key2, $cb2, ... ] |
| use sort 'stable'; # makes output more consistent |
| @{$r[1]} = map { ($_->[2], $_->[1]) } sort { $a->[0] <=> $b->[0] } @op; |
| @r; |
| } |
| |
| sub cmd_uid_fetch ($$$$;@) { |
| my ($self, $tag, $range_csv, @want) = @_; |
| my $ibx = $self->{ibx} or return "$tag BAD No mailbox selected\r\n"; |
| my ($cb, $ops, $partial) = fetch_compile(\@want); |
| return "$tag $cb\r\n" unless $ops; |
| |
| # cb is one of fetch_blob, fetch_smsg, fetch_uid |
| $range_csv = 'bad' if $range_csv !~ $valid_range; |
| my $range_info = range_step($self, \$range_csv); |
| return "$tag $range_info\r\n" if !ref($range_info); |
| uo2m_hibernate($self) if $cb == \&fetch_blob; # slow, save RAM |
| $self->long_response($cb, $tag, [], $range_info, $ops, $partial); |
| } |
| |
| sub cmd_fetch ($$$$;@) { |
| my ($self, $tag, $range_csv, @want) = @_; |
| my $ibx = $self->{ibx} or return "$tag BAD No mailbox selected\r\n"; |
| my ($cb, $ops, $partial) = fetch_compile(\@want); |
| return "$tag $cb\r\n" unless $ops; |
| |
| # cb is one of fetch_blob, fetch_smsg, fetch_uid |
| $range_csv = 'bad' if $range_csv !~ $valid_range; |
| msn_to_uid_range(msn2uid($self), $range_csv); |
| my $range_info = range_step($self, \$range_csv); |
| return "$tag $range_info\r\n" if !ref($range_info); |
| uo2m_hibernate($self) if $cb == \&fetch_blob; # slow, save RAM |
| $self->long_response($cb, $tag, [], $range_info, $ops, $partial); |
| } |
| |
| sub msn_convert ($$) { |
| my ($self, $uids) = @_; |
| my $adj = $self->{uid_base} + 1; |
| my $uo2m = uo2m_extend($self, $uids->[-1]); |
| $uo2m = [ unpack('S*', $uo2m) ] if !ref($uo2m); |
| $_ = $uo2m->[$_ - $adj] for @$uids; |
| } |
| |
| sub search_uid_range { # long_response |
| my ($self, $tag, $sql, $range_info, $want_msn) = @_; |
| my $uids = []; |
| if (defined(my $err = refill_uids($self, $uids, $range_info, $sql))) { |
| $err ||= 'OK Search done'; |
| $self->write("\r\n$tag $err\r\n"); |
| return; |
| } |
| msn_convert($self, $uids) if $want_msn; |
| $self->msg_more(join(' ', '', @$uids)); |
| 1; # more |
| } |
| |
| sub parse_imap_query ($$) { |
| my ($self, $query) = @_; |
| # IMAPsearchqp gets loaded in IMAPD->refresh_groups |
| my $q = PublicInbox::IMAPsearchqp::parse($self, $query); |
| if (ref($q)) { |
| my $max = $self->{ibx}->over(1)->max; |
| my $beg = 1; |
| uid_clamp($self, \$beg, \$max); |
| $q->{range_info} = [ $beg, $max ]; |
| } |
| $q; |
| } |
| |
| sub search_common { |
| my ($self, $tag, $query, $want_msn) = @_; |
| my $ibx = $self->{ibx} or return "$tag BAD No mailbox selected\r\n"; |
| my $q = parse_imap_query($self, $query); |
| return "$tag $q\r\n" if !ref($q); |
| my ($sql, $range_info) = delete @$q{qw(sql range_info)}; |
| if (!scalar(keys %$q)) { # overview.sqlite3 |
| $self->msg_more('* SEARCH'); |
| $self->long_response(\&search_uid_range, |
| $tag, $sql, $range_info, $want_msn); |
| } elsif ($q = $q->{xap}) { |
| my $srch = $self->{ibx}->isrch or |
| return "$tag BAD search not available for mailbox\r\n"; |
| my $opt = { |
| relevance => -1, |
| limit => UID_SLICE, |
| uid_range => $range_info |
| }; |
| my $mset = $srch->mset($q, $opt); |
| my $uids = $srch->mset_to_artnums($mset, $opt); |
| msn_convert($self, $uids) if scalar(@$uids) && $want_msn; |
| "* SEARCH @$uids\r\n$tag OK Search done\r\n"; |
| } else { |
| "$tag BAD Error\r\n"; |
| } |
| } |
| |
| sub cmd_uid_search ($$$) { |
| my ($self, $tag, $query) = @_; |
| search_common($self, $tag, $query); |
| } |
| |
| sub cmd_search ($$$;) { |
| my ($self, $tag, $query) = @_; |
| search_common($self, $tag, $query, 1); |
| } |
| |
| # returns 1 if we can continue, 0 if not due to buffered writes or disconnect |
| sub process_line ($$) { |
| my ($self, $l) = @_; |
| |
| # TODO: IMAP allows literals for big requests to upload messages |
| # (which we don't support) but maybe some big search queries use it. |
| # RFC 3501 9 (2) doesn't permit TAB or multiple SP |
| my ($tag, $req, @args) = parse_line('[ \t]+', 0, $l); |
| pop(@args) if (@args && !defined($args[-1])); |
| if (@args && uc($req) eq 'UID') { |
| $req .= "_".(shift @args); |
| } |
| my $res = eval { |
| if (defined(my $idle_tag = $self->{-idle_tag})) { |
| (uc($tag // '') eq 'DONE' && !defined($req)) ? |
| idle_done($self, $tag) : |
| "$idle_tag BAD expected DONE\r\n"; |
| } elsif (my $cmd = $self->can('cmd_'.lc($req // ''))) { |
| if ($cmd == \&cmd_uid_search || $cmd == \&cmd_search) { |
| # preserve user-supplied quotes for search |
| (undef, @args) = split(/ search /i, $l, 2); |
| } |
| $cmd->($self, $tag, @args); |
| } else { # this is weird |
| auth_challenge_ok($self) // |
| ($tag // '*') . |
| ' BAD Error in IMAP command '. |
| ($req // '(???)'). |
| ": Unknown command\r\n"; |
| } |
| }; |
| my $err = $@; |
| if ($err && $self->{sock}) { |
| $l =~ s/\r?\n//s; |
| warn("error from: $l ($err)\n"); |
| $tag //= '*'; |
| $res = \"$tag BAD program fault - command not performed\r\n"; |
| } |
| defined($res) ? $self->write($res) : 0; |
| } |
| |
| sub out ($$;@) { |
| my ($self, $fmt, @args) = @_; |
| printf { $self->{imapd}->{out} } $fmt."\n", @args; |
| } |
| |
| # callback used by PublicInbox::DS for any (e)poll (in/out/hup/err) |
| sub event_step { |
| my ($self) = @_; |
| local $SIG{__WARN__} = $self->{imapd}->{warn_cb}; |
| return unless $self->flush_write && $self->{sock} && !$self->{long_cb}; |
| |
| # only read more requests if we've drained the write buffer, |
| # otherwise we can be buffering infinitely w/o backpressure |
| |
| my $rbuf = $self->{rbuf} // \(my $x = ''); |
| my $line = index($$rbuf, "\n"); |
| while ($line < 0) { |
| if (length($$rbuf) >= LINE_MAX) { |
| $self->write(\"\* BAD request too long\r\n"); |
| return $self->close; |
| } |
| $self->do_read($rbuf, LINE_MAX, length($$rbuf)) or |
| return uo2m_hibernate($self); |
| $line = index($$rbuf, "\n"); |
| } |
| $line = substr($$rbuf, 0, $line + 1, ''); |
| $line =~ s/\r?\n\z//s; |
| return $self->close if $line =~ /[[:cntrl:]]/s; |
| my $t0 = now(); |
| my $fd = fileno($self->{sock}); |
| my $r = eval { process_line($self, $line) }; |
| my $pending = $self->{wbuf} ? ' pending' : ''; |
| out($self, "[$fd] %s - %0.6f$pending - $r", $line, now() - $t0); |
| |
| return $self->close if $r < 0; |
| $self->rbuf_idle($rbuf); |
| |
| # maybe there's more pipelined data, or we'll have |
| # to register it for socket-readiness notifications |
| $self->requeue unless $pending; |
| } |
| |
| # RFC 4978 |
| sub cmd_compress ($$$) { |
| my ($self, $tag, $alg) = @_; |
| return "$tag BAD DEFLATE only\r\n" if uc($alg) ne "DEFLATE"; |
| return "$tag BAD COMPRESS active\r\n" if $self->compressed; |
| |
| # CRIME made TLS compression obsolete |
| # return "$tag NO [COMPRESSIONACTIVE]\r\n" if $self->tls_compressed; |
| |
| PublicInbox::IMAPdeflate->enable($self) or return |
| \"$tag BAD failed to activate compression\r\n"; |
| PublicInbox::DS::write($self, \"$tag OK DEFLATE active\r\n"); |
| $self->requeue; |
| undef |
| } |
| |
| sub cmd_starttls ($$) { |
| my ($self, $tag) = @_; |
| (($self->{sock} // return)->can('stop_SSL') || $self->compressed) and |
| return "$tag BAD TLS or compression already enabled\r\n"; |
| $self->{imapd}->{ssl_ctx_opt} or |
| return "$tag BAD can not initiate TLS negotiation\r\n"; |
| $self->write(\"$tag OK begin TLS negotiation now\r\n"); |
| PublicInbox::TLS::start($self->{sock}, $self->{imapd}); |
| $self->requeue if PublicInbox::DS::accept_tls_step($self); |
| undef; |
| } |
| |
| sub busy { # for graceful shutdown in PublicInbox::Daemon: |
| my ($self) = @_; |
| if (defined($self->{-idle_tag})) { |
| $self->write(\"* BYE server shutting down\r\n"); |
| return; # not busy anymore |
| } |
| defined($self->{rbuf}) || defined($self->{wbuf}) || |
| !$self->write(\"* BYE server shutting down\r\n"); |
| } |
| |
| sub close { |
| my ($self) = @_; |
| if (my $ibx = delete $self->{ibx}) { |
| stop_idle($self, $ibx); |
| } |
| $self->SUPER::close; # PublicInbox::DS::close |
| } |
| |
| # we're read-only, so SELECT and EXAMINE do the same thing |
| no warnings 'once'; |
| *cmd_select = \&cmd_examine; |
| |
| package PublicInbox::IMAP_preauth; |
| our @ISA = qw(PublicInbox::IMAP); |
| |
| sub logged_in { 0 } |
| |
| package PublicInbox::IMAPdeflate; |
| use PublicInbox::DSdeflate; |
| our @ISA = qw(PublicInbox::DSdeflate PublicInbox::IMAP); |
| |
| 1; |