blob: e69306e6b0b180af5c8f9f69af82abdb6b367e37 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree Include file for Freescale Layerscape-1046A family SoC.
*
* Copyright 2016 Freescale Semiconductor, Inc.
*
* Shaohui Xie <Shaohui.Xie@nxp.com>
*/
/dts-v1/;
#include "fsl-ls1046a.dtsi"
/ {
model = "LS1046A QDS Board";
compatible = "fsl,ls1046a-qds", "fsl,ls1046a";
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
gpio3 = &gpio3;
serial0 = &duart0;
serial1 = &duart1;
serial2 = &duart2;
serial3 = &duart3;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&dspi {
bus-num = <0>;
status = "okay";
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q128a11", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
};
flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "sst25wf040b", "jedec,spi-nor";
spi-cpol;
spi-cpha;
reg = <1>;
spi-max-frequency = <10000000>;
};
flash@2 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "en25s64", "jedec,spi-nor";
spi-cpol;
spi-cpha;
reg = <2>;
spi-max-frequency = <10000000>;
};
};
&duart0 {
status = "okay";
};
&duart1 {
status = "okay";
};
&i2c0 {
status = "okay";
pca9547@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
ina220@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <1000>;
};
ina220@41 {
compatible = "ti,ina220";
reg = <0x41>;
shunt-resistor = <1000>;
};
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
/* IRQ10_B */
interrupts = <0 150 0x4>;
};
eeprom@56 {
compatible = "atmel,24c512";
reg = <0x56>;
};
eeprom@57 {
compatible = "atmel,24c512";
reg = <0x57>;
};
temp-sensor@4c {
compatible = "adi,adt7461a";
reg = <0x4c>;
};
};
};
};
&ifc {
#address-cells = <2>;
#size-cells = <1>;
/* NOR, NAND Flashes and FPGA on board */
ranges = <0x0 0x0 0x0 0x60000000 0x08000000
0x1 0x0 0x0 0x7e800000 0x00010000
0x2 0x0 0x0 0x7fb00000 0x00000100>;
status = "okay";
nor@0,0 {
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
nand@1,0 {
compatible = "fsl,ifc-nand";
reg = <0x1 0x0 0x10000>;
};
fpga: board-control@2,0 {
compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis";
reg = <0x2 0x0 0x0000100>;
};
};
&lpuart0 {
status = "okay";
};
&qspi {
num-cs = <2>;
bus-num = <0>;
status = "okay";
qflash0: s25fl128s@0 {
compatible = "spansion,m25p80";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <20000000>;
reg = <0>;
};
};
#include "fsl-ls1046-post.dtsi"