|  | /* | 
|  | * High-level sync()-related operations | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/file.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/export.h> | 
|  | #include <linux/namei.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/writeback.h> | 
|  | #include <linux/syscalls.h> | 
|  | #include <linux/linkage.h> | 
|  | #include <linux/pagemap.h> | 
|  | #include <linux/quotaops.h> | 
|  | #include <linux/backing-dev.h> | 
|  | #include "internal.h" | 
|  |  | 
|  | #define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \ | 
|  | SYNC_FILE_RANGE_WAIT_AFTER) | 
|  |  | 
|  | /* | 
|  | * Do the filesystem syncing work. For simple filesystems | 
|  | * writeback_inodes_sb(sb) just dirties buffers with inodes so we have to | 
|  | * submit IO for these buffers via __sync_blockdev(). This also speeds up the | 
|  | * wait == 1 case since in that case write_inode() functions do | 
|  | * sync_dirty_buffer() and thus effectively write one block at a time. | 
|  | */ | 
|  | static int __sync_filesystem(struct super_block *sb, int wait) | 
|  | { | 
|  | if (wait) | 
|  | sync_inodes_sb(sb); | 
|  | else | 
|  | writeback_inodes_sb(sb, WB_REASON_SYNC); | 
|  |  | 
|  | if (sb->s_op->sync_fs) | 
|  | sb->s_op->sync_fs(sb, wait); | 
|  | return __sync_blockdev(sb->s_bdev, wait); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Write out and wait upon all dirty data associated with this | 
|  | * superblock.  Filesystem data as well as the underlying block | 
|  | * device.  Takes the superblock lock. | 
|  | */ | 
|  | int sync_filesystem(struct super_block *sb) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | /* | 
|  | * We need to be protected against the filesystem going from | 
|  | * r/o to r/w or vice versa. | 
|  | */ | 
|  | WARN_ON(!rwsem_is_locked(&sb->s_umount)); | 
|  |  | 
|  | /* | 
|  | * No point in syncing out anything if the filesystem is read-only. | 
|  | */ | 
|  | if (sb->s_flags & MS_RDONLY) | 
|  | return 0; | 
|  |  | 
|  | ret = __sync_filesystem(sb, 0); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | return __sync_filesystem(sb, 1); | 
|  | } | 
|  | EXPORT_SYMBOL(sync_filesystem); | 
|  |  | 
|  | static void sync_inodes_one_sb(struct super_block *sb, void *arg) | 
|  | { | 
|  | if (!(sb->s_flags & MS_RDONLY)) | 
|  | sync_inodes_sb(sb); | 
|  | } | 
|  |  | 
|  | static void sync_fs_one_sb(struct super_block *sb, void *arg) | 
|  | { | 
|  | if (!(sb->s_flags & MS_RDONLY) && sb->s_op->sync_fs) | 
|  | sb->s_op->sync_fs(sb, *(int *)arg); | 
|  | } | 
|  |  | 
|  | static void fdatawrite_one_bdev(struct block_device *bdev, void *arg) | 
|  | { | 
|  | filemap_fdatawrite(bdev->bd_inode->i_mapping); | 
|  | } | 
|  |  | 
|  | static void fdatawait_one_bdev(struct block_device *bdev, void *arg) | 
|  | { | 
|  | /* | 
|  | * We keep the error status of individual mapping so that | 
|  | * applications can catch the writeback error using fsync(2). | 
|  | * See filemap_fdatawait_keep_errors() for details. | 
|  | */ | 
|  | filemap_fdatawait_keep_errors(bdev->bd_inode->i_mapping); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Sync everything. We start by waking flusher threads so that most of | 
|  | * writeback runs on all devices in parallel. Then we sync all inodes reliably | 
|  | * which effectively also waits for all flusher threads to finish doing | 
|  | * writeback. At this point all data is on disk so metadata should be stable | 
|  | * and we tell filesystems to sync their metadata via ->sync_fs() calls. | 
|  | * Finally, we writeout all block devices because some filesystems (e.g. ext2) | 
|  | * just write metadata (such as inodes or bitmaps) to block device page cache | 
|  | * and do not sync it on their own in ->sync_fs(). | 
|  | */ | 
|  | SYSCALL_DEFINE0(sync) | 
|  | { | 
|  | int nowait = 0, wait = 1; | 
|  |  | 
|  | wakeup_flusher_threads(0, WB_REASON_SYNC); | 
|  | iterate_supers(sync_inodes_one_sb, NULL); | 
|  | iterate_supers(sync_fs_one_sb, &nowait); | 
|  | iterate_supers(sync_fs_one_sb, &wait); | 
|  | iterate_bdevs(fdatawrite_one_bdev, NULL); | 
|  | iterate_bdevs(fdatawait_one_bdev, NULL); | 
|  | if (unlikely(laptop_mode)) | 
|  | laptop_sync_completion(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void do_sync_work(struct work_struct *work) | 
|  | { | 
|  | int nowait = 0; | 
|  |  | 
|  | /* | 
|  | * Sync twice to reduce the possibility we skipped some inodes / pages | 
|  | * because they were temporarily locked | 
|  | */ | 
|  | iterate_supers(sync_inodes_one_sb, &nowait); | 
|  | iterate_supers(sync_fs_one_sb, &nowait); | 
|  | iterate_bdevs(fdatawrite_one_bdev, NULL); | 
|  | iterate_supers(sync_inodes_one_sb, &nowait); | 
|  | iterate_supers(sync_fs_one_sb, &nowait); | 
|  | iterate_bdevs(fdatawrite_one_bdev, NULL); | 
|  | printk("Emergency Sync complete\n"); | 
|  | kfree(work); | 
|  | } | 
|  |  | 
|  | void emergency_sync(void) | 
|  | { | 
|  | struct work_struct *work; | 
|  |  | 
|  | work = kmalloc(sizeof(*work), GFP_ATOMIC); | 
|  | if (work) { | 
|  | INIT_WORK(work, do_sync_work); | 
|  | schedule_work(work); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * sync a single super | 
|  | */ | 
|  | SYSCALL_DEFINE1(syncfs, int, fd) | 
|  | { | 
|  | struct fd f = fdget(fd); | 
|  | struct super_block *sb; | 
|  | int ret; | 
|  |  | 
|  | if (!f.file) | 
|  | return -EBADF; | 
|  | sb = f.file->f_path.dentry->d_sb; | 
|  |  | 
|  | down_read(&sb->s_umount); | 
|  | ret = sync_filesystem(sb); | 
|  | up_read(&sb->s_umount); | 
|  |  | 
|  | fdput(f); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vfs_fsync_range - helper to sync a range of data & metadata to disk | 
|  | * @file:		file to sync | 
|  | * @start:		offset in bytes of the beginning of data range to sync | 
|  | * @end:		offset in bytes of the end of data range (inclusive) | 
|  | * @datasync:		perform only datasync | 
|  | * | 
|  | * Write back data in range @start..@end and metadata for @file to disk.  If | 
|  | * @datasync is set only metadata needed to access modified file data is | 
|  | * written. | 
|  | */ | 
|  | int vfs_fsync_range(struct file *file, loff_t start, loff_t end, int datasync) | 
|  | { | 
|  | struct inode *inode = file->f_mapping->host; | 
|  |  | 
|  | if (!file->f_op->fsync) | 
|  | return -EINVAL; | 
|  | if (!datasync && (inode->i_state & I_DIRTY_TIME)) { | 
|  | spin_lock(&inode->i_lock); | 
|  | inode->i_state &= ~I_DIRTY_TIME; | 
|  | spin_unlock(&inode->i_lock); | 
|  | mark_inode_dirty_sync(inode); | 
|  | } | 
|  | return call_fsync(file, start, end, datasync); | 
|  | } | 
|  | EXPORT_SYMBOL(vfs_fsync_range); | 
|  |  | 
|  | /** | 
|  | * vfs_fsync - perform a fsync or fdatasync on a file | 
|  | * @file:		file to sync | 
|  | * @datasync:		only perform a fdatasync operation | 
|  | * | 
|  | * Write back data and metadata for @file to disk.  If @datasync is | 
|  | * set only metadata needed to access modified file data is written. | 
|  | */ | 
|  | int vfs_fsync(struct file *file, int datasync) | 
|  | { | 
|  | return vfs_fsync_range(file, 0, LLONG_MAX, datasync); | 
|  | } | 
|  | EXPORT_SYMBOL(vfs_fsync); | 
|  |  | 
|  | static int do_fsync(unsigned int fd, int datasync) | 
|  | { | 
|  | struct fd f = fdget(fd); | 
|  | int ret = -EBADF; | 
|  |  | 
|  | if (f.file) { | 
|  | ret = vfs_fsync(f.file, datasync); | 
|  | fdput(f); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | SYSCALL_DEFINE1(fsync, unsigned int, fd) | 
|  | { | 
|  | return do_fsync(fd, 0); | 
|  | } | 
|  |  | 
|  | SYSCALL_DEFINE1(fdatasync, unsigned int, fd) | 
|  | { | 
|  | return do_fsync(fd, 1); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * sys_sync_file_range() permits finely controlled syncing over a segment of | 
|  | * a file in the range offset .. (offset+nbytes-1) inclusive.  If nbytes is | 
|  | * zero then sys_sync_file_range() will operate from offset out to EOF. | 
|  | * | 
|  | * The flag bits are: | 
|  | * | 
|  | * SYNC_FILE_RANGE_WAIT_BEFORE: wait upon writeout of all pages in the range | 
|  | * before performing the write. | 
|  | * | 
|  | * SYNC_FILE_RANGE_WRITE: initiate writeout of all those dirty pages in the | 
|  | * range which are not presently under writeback. Note that this may block for | 
|  | * significant periods due to exhaustion of disk request structures. | 
|  | * | 
|  | * SYNC_FILE_RANGE_WAIT_AFTER: wait upon writeout of all pages in the range | 
|  | * after performing the write. | 
|  | * | 
|  | * Useful combinations of the flag bits are: | 
|  | * | 
|  | * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE: ensures that all pages | 
|  | * in the range which were dirty on entry to sys_sync_file_range() are placed | 
|  | * under writeout.  This is a start-write-for-data-integrity operation. | 
|  | * | 
|  | * SYNC_FILE_RANGE_WRITE: start writeout of all dirty pages in the range which | 
|  | * are not presently under writeout.  This is an asynchronous flush-to-disk | 
|  | * operation.  Not suitable for data integrity operations. | 
|  | * | 
|  | * SYNC_FILE_RANGE_WAIT_BEFORE (or SYNC_FILE_RANGE_WAIT_AFTER): wait for | 
|  | * completion of writeout of all pages in the range.  This will be used after an | 
|  | * earlier SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE operation to wait | 
|  | * for that operation to complete and to return the result. | 
|  | * | 
|  | * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE|SYNC_FILE_RANGE_WAIT_AFTER: | 
|  | * a traditional sync() operation.  This is a write-for-data-integrity operation | 
|  | * which will ensure that all pages in the range which were dirty on entry to | 
|  | * sys_sync_file_range() are committed to disk. | 
|  | * | 
|  | * | 
|  | * SYNC_FILE_RANGE_WAIT_BEFORE and SYNC_FILE_RANGE_WAIT_AFTER will detect any | 
|  | * I/O errors or ENOSPC conditions and will return those to the caller, after | 
|  | * clearing the EIO and ENOSPC flags in the address_space. | 
|  | * | 
|  | * It should be noted that none of these operations write out the file's | 
|  | * metadata.  So unless the application is strictly performing overwrites of | 
|  | * already-instantiated disk blocks, there are no guarantees here that the data | 
|  | * will be available after a crash. | 
|  | */ | 
|  | SYSCALL_DEFINE4(sync_file_range, int, fd, loff_t, offset, loff_t, nbytes, | 
|  | unsigned int, flags) | 
|  | { | 
|  | int ret; | 
|  | struct fd f; | 
|  | struct address_space *mapping; | 
|  | loff_t endbyte;			/* inclusive */ | 
|  | umode_t i_mode; | 
|  |  | 
|  | ret = -EINVAL; | 
|  | if (flags & ~VALID_FLAGS) | 
|  | goto out; | 
|  |  | 
|  | endbyte = offset + nbytes; | 
|  |  | 
|  | if ((s64)offset < 0) | 
|  | goto out; | 
|  | if ((s64)endbyte < 0) | 
|  | goto out; | 
|  | if (endbyte < offset) | 
|  | goto out; | 
|  |  | 
|  | if (sizeof(pgoff_t) == 4) { | 
|  | if (offset >= (0x100000000ULL << PAGE_SHIFT)) { | 
|  | /* | 
|  | * The range starts outside a 32 bit machine's | 
|  | * pagecache addressing capabilities.  Let it "succeed" | 
|  | */ | 
|  | ret = 0; | 
|  | goto out; | 
|  | } | 
|  | if (endbyte >= (0x100000000ULL << PAGE_SHIFT)) { | 
|  | /* | 
|  | * Out to EOF | 
|  | */ | 
|  | nbytes = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (nbytes == 0) | 
|  | endbyte = LLONG_MAX; | 
|  | else | 
|  | endbyte--;		/* inclusive */ | 
|  |  | 
|  | ret = -EBADF; | 
|  | f = fdget(fd); | 
|  | if (!f.file) | 
|  | goto out; | 
|  |  | 
|  | i_mode = file_inode(f.file)->i_mode; | 
|  | ret = -ESPIPE; | 
|  | if (!S_ISREG(i_mode) && !S_ISBLK(i_mode) && !S_ISDIR(i_mode) && | 
|  | !S_ISLNK(i_mode)) | 
|  | goto out_put; | 
|  |  | 
|  | mapping = f.file->f_mapping; | 
|  | if (!mapping) { | 
|  | ret = -EINVAL; | 
|  | goto out_put; | 
|  | } | 
|  |  | 
|  | ret = 0; | 
|  | if (flags & SYNC_FILE_RANGE_WAIT_BEFORE) { | 
|  | ret = filemap_fdatawait_range(mapping, offset, endbyte); | 
|  | if (ret < 0) | 
|  | goto out_put; | 
|  | } | 
|  |  | 
|  | if (flags & SYNC_FILE_RANGE_WRITE) { | 
|  | ret = __filemap_fdatawrite_range(mapping, offset, endbyte, | 
|  | WB_SYNC_NONE); | 
|  | if (ret < 0) | 
|  | goto out_put; | 
|  | } | 
|  |  | 
|  | if (flags & SYNC_FILE_RANGE_WAIT_AFTER) | 
|  | ret = filemap_fdatawait_range(mapping, offset, endbyte); | 
|  |  | 
|  | out_put: | 
|  | fdput(f); | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* It would be nice if people remember that not all the world's an i386 | 
|  | when they introduce new system calls */ | 
|  | SYSCALL_DEFINE4(sync_file_range2, int, fd, unsigned int, flags, | 
|  | loff_t, offset, loff_t, nbytes) | 
|  | { | 
|  | return sys_sync_file_range(fd, offset, nbytes, flags); | 
|  | } |