| /* | |
| * Generic helpers for smp ipi calls | |
| * | |
| * (C) Jens Axboe <jens.axboe@oracle.com> 2008 | |
| */ | |
| #include <linux/rcupdate.h> | |
| #include <linux/rculist.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/percpu.h> | |
| #include <linux/init.h> | |
| #include <linux/smp.h> | |
| #include <linux/cpu.h> | |
| static DEFINE_PER_CPU(struct call_single_queue, call_single_queue); | |
| static struct { | |
| struct list_head queue; | |
| spinlock_t lock; | |
| } call_function __cacheline_aligned_in_smp = | |
| { | |
| .queue = LIST_HEAD_INIT(call_function.queue), | |
| .lock = __SPIN_LOCK_UNLOCKED(call_function.lock), | |
| }; | |
| enum { | |
| CSD_FLAG_LOCK = 0x01, | |
| }; | |
| struct call_function_data { | |
| struct call_single_data csd; | |
| atomic_t refs; | |
| cpumask_var_t cpumask; | |
| }; | |
| struct call_single_queue { | |
| struct list_head list; | |
| spinlock_t lock; | |
| }; | |
| static DEFINE_PER_CPU(struct call_function_data, cfd_data); | |
| static int | |
| hotplug_cfd(struct notifier_block *nfb, unsigned long action, void *hcpu) | |
| { | |
| long cpu = (long)hcpu; | |
| struct call_function_data *cfd = &per_cpu(cfd_data, cpu); | |
| switch (action) { | |
| case CPU_UP_PREPARE: | |
| case CPU_UP_PREPARE_FROZEN: | |
| if (!zalloc_cpumask_var_node(&cfd->cpumask, GFP_KERNEL, | |
| cpu_to_node(cpu))) | |
| return NOTIFY_BAD; | |
| break; | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| case CPU_UP_CANCELED: | |
| case CPU_UP_CANCELED_FROZEN: | |
| case CPU_DEAD: | |
| case CPU_DEAD_FROZEN: | |
| free_cpumask_var(cfd->cpumask); | |
| break; | |
| #endif | |
| }; | |
| return NOTIFY_OK; | |
| } | |
| static struct notifier_block __cpuinitdata hotplug_cfd_notifier = { | |
| .notifier_call = hotplug_cfd, | |
| }; | |
| static int __cpuinit init_call_single_data(void) | |
| { | |
| void *cpu = (void *)(long)smp_processor_id(); | |
| int i; | |
| for_each_possible_cpu(i) { | |
| struct call_single_queue *q = &per_cpu(call_single_queue, i); | |
| spin_lock_init(&q->lock); | |
| INIT_LIST_HEAD(&q->list); | |
| } | |
| hotplug_cfd(&hotplug_cfd_notifier, CPU_UP_PREPARE, cpu); | |
| register_cpu_notifier(&hotplug_cfd_notifier); | |
| return 0; | |
| } | |
| early_initcall(init_call_single_data); | |
| /* | |
| * csd_lock/csd_unlock used to serialize access to per-cpu csd resources | |
| * | |
| * For non-synchronous ipi calls the csd can still be in use by the | |
| * previous function call. For multi-cpu calls its even more interesting | |
| * as we'll have to ensure no other cpu is observing our csd. | |
| */ | |
| static void csd_lock_wait(struct call_single_data *data) | |
| { | |
| while (data->flags & CSD_FLAG_LOCK) | |
| cpu_relax(); | |
| } | |
| static void csd_lock(struct call_single_data *data) | |
| { | |
| csd_lock_wait(data); | |
| data->flags = CSD_FLAG_LOCK; | |
| /* | |
| * prevent CPU from reordering the above assignment | |
| * to ->flags with any subsequent assignments to other | |
| * fields of the specified call_single_data structure: | |
| */ | |
| smp_mb(); | |
| } | |
| static void csd_unlock(struct call_single_data *data) | |
| { | |
| WARN_ON(!(data->flags & CSD_FLAG_LOCK)); | |
| /* | |
| * ensure we're all done before releasing data: | |
| */ | |
| smp_mb(); | |
| data->flags &= ~CSD_FLAG_LOCK; | |
| } | |
| /* | |
| * Insert a previously allocated call_single_data element | |
| * for execution on the given CPU. data must already have | |
| * ->func, ->info, and ->flags set. | |
| */ | |
| static | |
| void generic_exec_single(int cpu, struct call_single_data *data, int wait) | |
| { | |
| struct call_single_queue *dst = &per_cpu(call_single_queue, cpu); | |
| unsigned long flags; | |
| int ipi; | |
| spin_lock_irqsave(&dst->lock, flags); | |
| ipi = list_empty(&dst->list); | |
| list_add_tail(&data->list, &dst->list); | |
| spin_unlock_irqrestore(&dst->lock, flags); | |
| /* | |
| * The list addition should be visible before sending the IPI | |
| * handler locks the list to pull the entry off it because of | |
| * normal cache coherency rules implied by spinlocks. | |
| * | |
| * If IPIs can go out of order to the cache coherency protocol | |
| * in an architecture, sufficient synchronisation should be added | |
| * to arch code to make it appear to obey cache coherency WRT | |
| * locking and barrier primitives. Generic code isn't really | |
| * equipped to do the right thing... | |
| */ | |
| if (ipi) | |
| arch_send_call_function_single_ipi(cpu); | |
| if (wait) | |
| csd_lock_wait(data); | |
| } | |
| /* | |
| * Invoked by arch to handle an IPI for call function. Must be called with | |
| * interrupts disabled. | |
| */ | |
| void generic_smp_call_function_interrupt(void) | |
| { | |
| struct call_function_data *data; | |
| int cpu = get_cpu(); | |
| /* | |
| * Shouldn't receive this interrupt on a cpu that is not yet online. | |
| */ | |
| WARN_ON_ONCE(!cpu_online(cpu)); | |
| /* | |
| * Ensure entry is visible on call_function_queue after we have | |
| * entered the IPI. See comment in smp_call_function_many. | |
| * If we don't have this, then we may miss an entry on the list | |
| * and never get another IPI to process it. | |
| */ | |
| smp_mb(); | |
| /* | |
| * It's ok to use list_for_each_rcu() here even though we may | |
| * delete 'pos', since list_del_rcu() doesn't clear ->next | |
| */ | |
| list_for_each_entry_rcu(data, &call_function.queue, csd.list) { | |
| int refs; | |
| if (!cpumask_test_and_clear_cpu(cpu, data->cpumask)) | |
| continue; | |
| data->csd.func(data->csd.info); | |
| refs = atomic_dec_return(&data->refs); | |
| WARN_ON(refs < 0); | |
| if (!refs) { | |
| spin_lock(&call_function.lock); | |
| list_del_rcu(&data->csd.list); | |
| spin_unlock(&call_function.lock); | |
| } | |
| if (refs) | |
| continue; | |
| csd_unlock(&data->csd); | |
| } | |
| put_cpu(); | |
| } | |
| /* | |
| * Invoked by arch to handle an IPI for call function single. Must be | |
| * called from the arch with interrupts disabled. | |
| */ | |
| void generic_smp_call_function_single_interrupt(void) | |
| { | |
| struct call_single_queue *q = &__get_cpu_var(call_single_queue); | |
| unsigned int data_flags; | |
| LIST_HEAD(list); | |
| /* | |
| * Shouldn't receive this interrupt on a cpu that is not yet online. | |
| */ | |
| WARN_ON_ONCE(!cpu_online(smp_processor_id())); | |
| spin_lock(&q->lock); | |
| list_replace_init(&q->list, &list); | |
| spin_unlock(&q->lock); | |
| while (!list_empty(&list)) { | |
| struct call_single_data *data; | |
| data = list_entry(list.next, struct call_single_data, list); | |
| list_del(&data->list); | |
| /* | |
| * 'data' can be invalid after this call if flags == 0 | |
| * (when called through generic_exec_single()), | |
| * so save them away before making the call: | |
| */ | |
| data_flags = data->flags; | |
| data->func(data->info); | |
| /* | |
| * Unlocked CSDs are valid through generic_exec_single(): | |
| */ | |
| if (data_flags & CSD_FLAG_LOCK) | |
| csd_unlock(data); | |
| } | |
| } | |
| static DEFINE_PER_CPU(struct call_single_data, csd_data); | |
| /* | |
| * smp_call_function_single - Run a function on a specific CPU | |
| * @func: The function to run. This must be fast and non-blocking. | |
| * @info: An arbitrary pointer to pass to the function. | |
| * @wait: If true, wait until function has completed on other CPUs. | |
| * | |
| * Returns 0 on success, else a negative status code. Note that @wait | |
| * will be implicitly turned on in case of allocation failures, since | |
| * we fall back to on-stack allocation. | |
| */ | |
| int smp_call_function_single(int cpu, void (*func) (void *info), void *info, | |
| int wait) | |
| { | |
| struct call_single_data d = { | |
| .flags = 0, | |
| }; | |
| unsigned long flags; | |
| int this_cpu; | |
| int err = 0; | |
| /* | |
| * prevent preemption and reschedule on another processor, | |
| * as well as CPU removal | |
| */ | |
| this_cpu = get_cpu(); | |
| /* | |
| * Can deadlock when called with interrupts disabled. | |
| * We allow cpu's that are not yet online though, as no one else can | |
| * send smp call function interrupt to this cpu and as such deadlocks | |
| * can't happen. | |
| */ | |
| WARN_ON_ONCE(cpu_online(this_cpu) && irqs_disabled() | |
| && !oops_in_progress); | |
| if (cpu == this_cpu) { | |
| local_irq_save(flags); | |
| func(info); | |
| local_irq_restore(flags); | |
| } else { | |
| if ((unsigned)cpu < nr_cpu_ids && cpu_online(cpu)) { | |
| struct call_single_data *data = &d; | |
| if (!wait) | |
| data = &__get_cpu_var(csd_data); | |
| csd_lock(data); | |
| data->func = func; | |
| data->info = info; | |
| generic_exec_single(cpu, data, wait); | |
| } else { | |
| err = -ENXIO; /* CPU not online */ | |
| } | |
| } | |
| put_cpu(); | |
| return err; | |
| } | |
| EXPORT_SYMBOL(smp_call_function_single); | |
| /** | |
| * __smp_call_function_single(): Run a function on another CPU | |
| * @cpu: The CPU to run on. | |
| * @data: Pre-allocated and setup data structure | |
| * | |
| * Like smp_call_function_single(), but allow caller to pass in a | |
| * pre-allocated data structure. Useful for embedding @data inside | |
| * other structures, for instance. | |
| */ | |
| void __smp_call_function_single(int cpu, struct call_single_data *data, | |
| int wait) | |
| { | |
| csd_lock(data); | |
| /* | |
| * Can deadlock when called with interrupts disabled. | |
| * We allow cpu's that are not yet online though, as no one else can | |
| * send smp call function interrupt to this cpu and as such deadlocks | |
| * can't happen. | |
| */ | |
| WARN_ON_ONCE(cpu_online(smp_processor_id()) && wait && irqs_disabled() | |
| && !oops_in_progress); | |
| generic_exec_single(cpu, data, wait); | |
| } | |
| /** | |
| * smp_call_function_many(): Run a function on a set of other CPUs. | |
| * @mask: The set of cpus to run on (only runs on online subset). | |
| * @func: The function to run. This must be fast and non-blocking. | |
| * @info: An arbitrary pointer to pass to the function. | |
| * @wait: If true, wait (atomically) until function has completed | |
| * on other CPUs. | |
| * | |
| * If @wait is true, then returns once @func has returned. Note that @wait | |
| * will be implicitly turned on in case of allocation failures, since | |
| * we fall back to on-stack allocation. | |
| * | |
| * You must not call this function with disabled interrupts or from a | |
| * hardware interrupt handler or from a bottom half handler. Preemption | |
| * must be disabled when calling this function. | |
| */ | |
| void smp_call_function_many(const struct cpumask *mask, | |
| void (*func)(void *), void *info, bool wait) | |
| { | |
| struct call_function_data *data; | |
| unsigned long flags; | |
| int cpu, next_cpu, this_cpu = smp_processor_id(); | |
| /* | |
| * Can deadlock when called with interrupts disabled. | |
| * We allow cpu's that are not yet online though, as no one else can | |
| * send smp call function interrupt to this cpu and as such deadlocks | |
| * can't happen. | |
| */ | |
| WARN_ON_ONCE(cpu_online(this_cpu) && irqs_disabled() | |
| && !oops_in_progress); | |
| /* So, what's a CPU they want? Ignoring this one. */ | |
| cpu = cpumask_first_and(mask, cpu_online_mask); | |
| if (cpu == this_cpu) | |
| cpu = cpumask_next_and(cpu, mask, cpu_online_mask); | |
| /* No online cpus? We're done. */ | |
| if (cpu >= nr_cpu_ids) | |
| return; | |
| /* Do we have another CPU which isn't us? */ | |
| next_cpu = cpumask_next_and(cpu, mask, cpu_online_mask); | |
| if (next_cpu == this_cpu) | |
| next_cpu = cpumask_next_and(next_cpu, mask, cpu_online_mask); | |
| /* Fastpath: do that cpu by itself. */ | |
| if (next_cpu >= nr_cpu_ids) { | |
| smp_call_function_single(cpu, func, info, wait); | |
| return; | |
| } | |
| data = &__get_cpu_var(cfd_data); | |
| csd_lock(&data->csd); | |
| data->csd.func = func; | |
| data->csd.info = info; | |
| cpumask_and(data->cpumask, mask, cpu_online_mask); | |
| cpumask_clear_cpu(this_cpu, data->cpumask); | |
| atomic_set(&data->refs, cpumask_weight(data->cpumask)); | |
| spin_lock_irqsave(&call_function.lock, flags); | |
| /* | |
| * Place entry at the _HEAD_ of the list, so that any cpu still | |
| * observing the entry in generic_smp_call_function_interrupt() | |
| * will not miss any other list entries: | |
| */ | |
| list_add_rcu(&data->csd.list, &call_function.queue); | |
| spin_unlock_irqrestore(&call_function.lock, flags); | |
| /* | |
| * Make the list addition visible before sending the ipi. | |
| * (IPIs must obey or appear to obey normal Linux cache | |
| * coherency rules -- see comment in generic_exec_single). | |
| */ | |
| smp_mb(); | |
| /* Send a message to all CPUs in the map */ | |
| arch_send_call_function_ipi_mask(data->cpumask); | |
| /* Optionally wait for the CPUs to complete */ | |
| if (wait) | |
| csd_lock_wait(&data->csd); | |
| } | |
| EXPORT_SYMBOL(smp_call_function_many); | |
| /** | |
| * smp_call_function(): Run a function on all other CPUs. | |
| * @func: The function to run. This must be fast and non-blocking. | |
| * @info: An arbitrary pointer to pass to the function. | |
| * @wait: If true, wait (atomically) until function has completed | |
| * on other CPUs. | |
| * | |
| * Returns 0. | |
| * | |
| * If @wait is true, then returns once @func has returned; otherwise | |
| * it returns just before the target cpu calls @func. In case of allocation | |
| * failure, @wait will be implicitly turned on. | |
| * | |
| * You must not call this function with disabled interrupts or from a | |
| * hardware interrupt handler or from a bottom half handler. | |
| */ | |
| int smp_call_function(void (*func)(void *), void *info, int wait) | |
| { | |
| preempt_disable(); | |
| smp_call_function_many(cpu_online_mask, func, info, wait); | |
| preempt_enable(); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(smp_call_function); | |
| void ipi_call_lock(void) | |
| { | |
| spin_lock(&call_function.lock); | |
| } | |
| void ipi_call_unlock(void) | |
| { | |
| spin_unlock(&call_function.lock); | |
| } | |
| void ipi_call_lock_irq(void) | |
| { | |
| spin_lock_irq(&call_function.lock); | |
| } | |
| void ipi_call_unlock_irq(void) | |
| { | |
| spin_unlock_irq(&call_function.lock); | |
| } |