|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * HID driver for some ITE "special" devices | 
|  | * Copyright (c) 2017 Hans de Goede <hdegoede@redhat.com> | 
|  | */ | 
|  |  | 
|  | #include <linux/device.h> | 
|  | #include <linux/input.h> | 
|  | #include <linux/hid.h> | 
|  | #include <linux/module.h> | 
|  |  | 
|  | #include "hid-ids.h" | 
|  |  | 
|  | #define QUIRK_TOUCHPAD_ON_OFF_REPORT		BIT(0) | 
|  |  | 
|  | static const __u8 *ite_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int *rsize) | 
|  | { | 
|  | unsigned long quirks = (unsigned long)hid_get_drvdata(hdev); | 
|  |  | 
|  | if (quirks & QUIRK_TOUCHPAD_ON_OFF_REPORT) { | 
|  | /* For Acer Aspire Switch 10 SW5-012 keyboard-dock */ | 
|  | if (*rsize == 188 && rdesc[162] == 0x81 && rdesc[163] == 0x02) { | 
|  | hid_info(hdev, "Fixing up Acer Sw5-012 ITE keyboard report descriptor\n"); | 
|  | rdesc[163] = HID_MAIN_ITEM_RELATIVE; | 
|  | } | 
|  | /* For Acer One S1002/S1003 keyboard-dock */ | 
|  | if (*rsize == 188 && rdesc[185] == 0x81 && rdesc[186] == 0x02) { | 
|  | hid_info(hdev, "Fixing up Acer S1002/S1003 ITE keyboard report descriptor\n"); | 
|  | rdesc[186] = HID_MAIN_ITEM_RELATIVE; | 
|  | } | 
|  | /* For Acer Aspire Switch 10E (SW3-016) keyboard-dock */ | 
|  | if (*rsize == 210 && rdesc[184] == 0x81 && rdesc[185] == 0x02) { | 
|  | hid_info(hdev, "Fixing up Acer Aspire Switch 10E (SW3-016) ITE keyboard report descriptor\n"); | 
|  | rdesc[185] = HID_MAIN_ITEM_RELATIVE; | 
|  | } | 
|  | } | 
|  |  | 
|  | return rdesc; | 
|  | } | 
|  |  | 
|  | static int ite_input_mapping(struct hid_device *hdev, | 
|  | struct hid_input *hi, struct hid_field *field, | 
|  | struct hid_usage *usage, unsigned long **bit, | 
|  | int *max) | 
|  | { | 
|  |  | 
|  | unsigned long quirks = (unsigned long)hid_get_drvdata(hdev); | 
|  |  | 
|  | if ((quirks & QUIRK_TOUCHPAD_ON_OFF_REPORT) && | 
|  | (usage->hid & HID_USAGE_PAGE) == 0x00880000) { | 
|  | if (usage->hid == 0x00880078) { | 
|  | /* Touchpad on, userspace expects F22 for this */ | 
|  | hid_map_usage_clear(hi, usage, bit, max, EV_KEY, KEY_F22); | 
|  | return 1; | 
|  | } | 
|  | if (usage->hid == 0x00880079) { | 
|  | /* Touchpad off, userspace expects F23 for this */ | 
|  | hid_map_usage_clear(hi, usage, bit, max, EV_KEY, KEY_F23); | 
|  | return 1; | 
|  | } | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ite_event(struct hid_device *hdev, struct hid_field *field, | 
|  | struct hid_usage *usage, __s32 value) | 
|  | { | 
|  | struct input_dev *input; | 
|  |  | 
|  | if (!(hdev->claimed & HID_CLAIMED_INPUT) || !field->hidinput) | 
|  | return 0; | 
|  |  | 
|  | input = field->hidinput->input; | 
|  |  | 
|  | /* | 
|  | * The ITE8595 always reports 0 as value for the rfkill button. Luckily | 
|  | * it is the only button in its report, and it sends a report on | 
|  | * release only, so receiving a report means the button was pressed. | 
|  | */ | 
|  | if (usage->hid == HID_GD_RFKILL_BTN) { | 
|  | input_event(input, EV_KEY, KEY_RFKILL, 1); | 
|  | input_sync(input); | 
|  | input_event(input, EV_KEY, KEY_RFKILL, 0); | 
|  | input_sync(input); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ite_probe(struct hid_device *hdev, const struct hid_device_id *id) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | hid_set_drvdata(hdev, (void *)id->driver_data); | 
|  |  | 
|  | ret = hid_open_report(hdev); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return hid_hw_start(hdev, HID_CONNECT_DEFAULT); | 
|  | } | 
|  |  | 
|  | static const struct hid_device_id ite_devices[] = { | 
|  | { HID_USB_DEVICE(USB_VENDOR_ID_ITE, USB_DEVICE_ID_ITE8595) }, | 
|  | { HID_USB_DEVICE(USB_VENDOR_ID_258A, USB_DEVICE_ID_258A_6A88) }, | 
|  | /* ITE8595 USB kbd ctlr, with Synaptics touchpad connected to it. */ | 
|  | { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC, | 
|  | USB_VENDOR_ID_SYNAPTICS, | 
|  | USB_DEVICE_ID_SYNAPTICS_ACER_SWITCH5_012), | 
|  | .driver_data = QUIRK_TOUCHPAD_ON_OFF_REPORT }, | 
|  | /* ITE8910 USB kbd ctlr, with Synaptics touchpad connected to it. */ | 
|  | { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC, | 
|  | USB_VENDOR_ID_SYNAPTICS, | 
|  | USB_DEVICE_ID_SYNAPTICS_ACER_ONE_S1002), | 
|  | .driver_data = QUIRK_TOUCHPAD_ON_OFF_REPORT }, | 
|  | /* ITE8910 USB kbd ctlr, with Synaptics touchpad connected to it. */ | 
|  | { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC, | 
|  | USB_VENDOR_ID_SYNAPTICS, | 
|  | USB_DEVICE_ID_SYNAPTICS_ACER_ONE_S1003), | 
|  | .driver_data = QUIRK_TOUCHPAD_ON_OFF_REPORT }, | 
|  | /* ITE8910 USB kbd ctlr, with Synaptics touchpad connected to it. */ | 
|  | { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC, | 
|  | USB_VENDOR_ID_SYNAPTICS, | 
|  | USB_DEVICE_ID_SYNAPTICS_ACER_SWITCH5_017), | 
|  | .driver_data = QUIRK_TOUCHPAD_ON_OFF_REPORT }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(hid, ite_devices); | 
|  |  | 
|  | static struct hid_driver ite_driver = { | 
|  | .name = "itetech", | 
|  | .id_table = ite_devices, | 
|  | .probe = ite_probe, | 
|  | .report_fixup = ite_report_fixup, | 
|  | .input_mapping = ite_input_mapping, | 
|  | .event = ite_event, | 
|  | }; | 
|  | module_hid_driver(ite_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); | 
|  | MODULE_DESCRIPTION("HID driver for some ITE \"special\" devices"); | 
|  | MODULE_LICENSE("GPL"); |