|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * EZ-USB specific functions used by some of the USB to Serial drivers. | 
|  | * | 
|  | * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com) | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/usb.h> | 
|  | #include <linux/firmware.h> | 
|  | #include <linux/ihex.h> | 
|  | #include <linux/usb/ezusb.h> | 
|  |  | 
|  | struct ezusb_fx_type { | 
|  | /* EZ-USB Control and Status Register.  Bit 0 controls 8051 reset */ | 
|  | unsigned short cpucs_reg; | 
|  | unsigned short max_internal_adress; | 
|  | }; | 
|  |  | 
|  | static const struct ezusb_fx_type ezusb_fx1 = { | 
|  | .cpucs_reg = 0x7F92, | 
|  | .max_internal_adress = 0x1B3F, | 
|  | }; | 
|  |  | 
|  | /* Commands for writing to memory */ | 
|  | #define WRITE_INT_RAM 0xA0 | 
|  | #define WRITE_EXT_RAM 0xA3 | 
|  |  | 
|  | static int ezusb_writememory(struct usb_device *dev, int address, | 
|  | unsigned char *data, int length, __u8 request) | 
|  | { | 
|  | if (!dev) | 
|  | return -ENODEV; | 
|  |  | 
|  | return usb_control_msg_send(dev, 0, request, | 
|  | USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, | 
|  | address, 0, data, length, 3000, GFP_KERNEL); | 
|  | } | 
|  |  | 
|  | static int ezusb_set_reset(struct usb_device *dev, unsigned short cpucs_reg, | 
|  | unsigned char reset_bit) | 
|  | { | 
|  | int response = ezusb_writememory(dev, cpucs_reg, &reset_bit, 1, WRITE_INT_RAM); | 
|  | if (response < 0) | 
|  | dev_err(&dev->dev, "%s-%d failed: %d\n", | 
|  | __func__, reset_bit, response); | 
|  | return response; | 
|  | } | 
|  |  | 
|  | int ezusb_fx1_set_reset(struct usb_device *dev, unsigned char reset_bit) | 
|  | { | 
|  | return ezusb_set_reset(dev, ezusb_fx1.cpucs_reg, reset_bit); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ezusb_fx1_set_reset); | 
|  |  | 
|  | static int ezusb_ihex_firmware_download(struct usb_device *dev, | 
|  | struct ezusb_fx_type fx, | 
|  | const char *firmware_path) | 
|  | { | 
|  | int ret = -ENOENT; | 
|  | const struct firmware *firmware = NULL; | 
|  | const struct ihex_binrec *record; | 
|  |  | 
|  | if (request_ihex_firmware(&firmware, firmware_path, | 
|  | &dev->dev)) { | 
|  | dev_err(&dev->dev, | 
|  | "%s - request \"%s\" failed\n", | 
|  | __func__, firmware_path); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = ezusb_set_reset(dev, fx.cpucs_reg, 0); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  |  | 
|  | record = (const struct ihex_binrec *)firmware->data; | 
|  | for (; record; record = ihex_next_binrec(record)) { | 
|  | if (be32_to_cpu(record->addr) > fx.max_internal_adress) { | 
|  | ret = ezusb_writememory(dev, be32_to_cpu(record->addr), | 
|  | (unsigned char *)record->data, | 
|  | be16_to_cpu(record->len), WRITE_EXT_RAM); | 
|  | if (ret < 0) { | 
|  | dev_err(&dev->dev, "%s - ezusb_writememory " | 
|  | "failed writing internal memory " | 
|  | "(%d %04X %p %d)\n", __func__, ret, | 
|  | be32_to_cpu(record->addr), record->data, | 
|  | be16_to_cpu(record->len)); | 
|  | goto out; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | ret = ezusb_set_reset(dev, fx.cpucs_reg, 1); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  | record = (const struct ihex_binrec *)firmware->data; | 
|  | for (; record; record = ihex_next_binrec(record)) { | 
|  | if (be32_to_cpu(record->addr) <= fx.max_internal_adress) { | 
|  | ret = ezusb_writememory(dev, be32_to_cpu(record->addr), | 
|  | (unsigned char *)record->data, | 
|  | be16_to_cpu(record->len), WRITE_INT_RAM); | 
|  | if (ret < 0) { | 
|  | dev_err(&dev->dev, "%s - ezusb_writememory " | 
|  | "failed writing external memory " | 
|  | "(%d %04X %p %d)\n", __func__, ret, | 
|  | be32_to_cpu(record->addr), record->data, | 
|  | be16_to_cpu(record->len)); | 
|  | goto out; | 
|  | } | 
|  | } | 
|  | } | 
|  | ret = ezusb_set_reset(dev, fx.cpucs_reg, 0); | 
|  | out: | 
|  | release_firmware(firmware); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int ezusb_fx1_ihex_firmware_download(struct usb_device *dev, | 
|  | const char *firmware_path) | 
|  | { | 
|  | return ezusb_ihex_firmware_download(dev, ezusb_fx1, firmware_path); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ezusb_fx1_ihex_firmware_download); | 
|  |  | 
|  | #if 0 | 
|  | /* | 
|  | * Once someone one needs these fx2 functions, uncomment them | 
|  | * and add them to ezusb.h and all should be good. | 
|  | */ | 
|  | static struct ezusb_fx_type ezusb_fx2 = { | 
|  | .cpucs_reg = 0xE600, | 
|  | .max_internal_adress = 0x3FFF, | 
|  | }; | 
|  |  | 
|  | int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit) | 
|  | { | 
|  | return ezusb_set_reset(dev, ezusb_fx2.cpucs_reg, reset_bit); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ezusb_fx2_set_reset); | 
|  |  | 
|  | int ezusb_fx2_ihex_firmware_download(struct usb_device *dev, | 
|  | const char *firmware_path) | 
|  | { | 
|  | return ezusb_ihex_firmware_download(dev, ezusb_fx2, firmware_path); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ezusb_fx2_ihex_firmware_download); | 
|  | #endif | 
|  |  | 
|  | MODULE_DESCRIPTION("EZUSB device support"); | 
|  | MODULE_LICENSE("GPL"); |