arch/arm/boot/dts/imx6qp-sabreauto.dts

/*
 * Copyright 2016 Freescale Semiconductor, Inc.
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This file is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

/dts-v1/;

#include "imx6qp.dtsi"
#include "imx6qdl-sabreauto.dtsi"

/ {
	model = "Freescale i.MX6 Quad Plus SABRE Automotive Board";
	compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp";
};

&i2c2 {
	max7322: gpio@68 {
		compatible = "maxim,max7322";
		reg = <0x68>;
		gpio-controller;
		#gpio-cells = <2>;
	};
};

&iomuxc {
	imx6qdl-sabreauto {
		pinctrl_enet: enetgrp {
			fsl,pins = <
				MX6QDL_PAD_KEY_COL1__ENET_MDIO          0x1b0b0
				MX6QDL_PAD_KEY_COL2__ENET_MDC           0x1b0b0
				MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b018
				MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b018
				MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b018
				MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b018
				MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b018
				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b018
				MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b018
				MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b018
				MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b018
				MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b018
				MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b018
				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b018
				MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
			>;
		};
	};
};

&pcie {
	status = "disabled";
};

&vgen3_reg {
	regulator-always-on;
};