ARM: orion: multiplatform support
All three remaining orion based platforms are now ready to
be enabled for multiplatform support, this patch does the
switch over by modifying the Kconfig file, the defconfig and
removing the last mach/*.h header that becomes obsolete with
this.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Andrew Lunn <andrew@lunn.ch>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c5ed1b6..1b8d9d8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -504,68 +504,6 @@
help
Support for Intel's IXP4XX (XScale) family of processors.
-config ARCH_DOVE
- bool "Marvell Dove"
- select ARCH_REQUIRE_GPIOLIB
- select CPU_PJ4
- select GENERIC_CLOCKEVENTS
- select MIGHT_HAVE_PCI
- select MULTI_IRQ_HANDLER
- select MVEBU_MBUS
- select PINCTRL
- select PINCTRL_DOVE
- select PLAT_ORION_LEGACY
- select SPARSE_IRQ
- help
- Support for the Marvell Dove SoC 88AP510
-
-config ARCH_MV78XX0
- bool "Marvell MV78xx0"
- select ARCH_REQUIRE_GPIOLIB
- select CPU_FEROCEON
- select GENERIC_CLOCKEVENTS
- select MVEBU_MBUS
- select MULTI_IRQ_HANDLER
- select PCI
- select PLAT_ORION_LEGACY
- select SPARSE_IRQ
- help
- Support for the following Marvell MV78xx0 series SoCs:
- MV781x0, MV782x0.
-
-config ARCH_ORION5X
- bool "Marvell Orion"
- depends on MMU
- select ARCH_REQUIRE_GPIOLIB
- select CPU_FEROCEON
- select GENERIC_CLOCKEVENTS
- select MVEBU_MBUS
- select MULTI_IRQ_HANDLER
- select PCI
- select PLAT_ORION_LEGACY
- select MULTI_IRQ_HANDLER
- select SPARSE_IRQ
- help
- Support for the following Marvell Orion 5x series SoCs:
- Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
- Orion-2 (5281), Orion-1-90 (6183).
-
-config ARCH_MMP
- bool "Marvell PXA168/910/MMP2"
- depends on MMU
- select ARCH_REQUIRE_GPIOLIB
- select CLKDEV_LOOKUP
- select GENERIC_ALLOCATOR
- select GENERIC_CLOCKEVENTS
- select GPIO_PXA
- select IRQ_DOMAIN
- select MULTI_IRQ_HANDLER
- select PINCTRL
- select PLAT_PXA
- select SPARSE_IRQ
- help
- Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
-
config ARCH_KS8695
bool "Micrel/Kendin KS8695"
select ARCH_REQUIRE_GPIOLIB
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
index 701677f9..8a5409c 100644
--- a/arch/arm/configs/dove_defconfig
+++ b/arch/arm/configs/dove_defconfig
@@ -9,6 +9,8 @@
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ARCH_MULTI_V6 is not set
+CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_DOVE=y
CONFIG_MACH_DOVE_DB=y
CONFIG_MACH_CM_A510=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index 85d10d2..fcdffa7 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -11,6 +11,9 @@
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V6 is not set
+# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_MV78XX0=y
CONFIG_MACH_DB78X00_BP=y
CONFIG_MACH_RD78X00_MASA=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 8099417..6ddca88 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -13,6 +13,9 @@
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_BSD_DISKLABEL=y
+CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V6 is not set
+# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_ORION5X=y
CONFIG_ARCH_ORION5X_DT=y
CONFIG_MACH_DB88F5281=y
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
index d8c439c..331591c 100644
--- a/arch/arm/mach-dove/Kconfig
+++ b/arch/arm/mach-dove/Kconfig
@@ -1,6 +1,15 @@
-if ARCH_DOVE
+menuconfig ARCH_DOVE
+ bool "Marvell Dove" if ARCH_MULTI_V7
+ select ARCH_REQUIRE_GPIOLIB
+ select CPU_PJ4
+ select MVEBU_MBUS
+ select PINCTRL
+ select PINCTRL_DOVE
+ select PLAT_ORION_LEGACY
+ help
+ Support for the Marvell Dove SoC 88AP510
-menu "Marvell Dove Implementations"
+if ARCH_DOVE
config DOVE_LEGACY
bool
@@ -20,6 +29,4 @@
Say 'Y' here if you want your kernel to support the
CompuLab CM-A510 Board.
-endmenu
-
endif
diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile
index b608a21..2ed6970 100644
--- a/arch/arm/mach-dove/Makefile
+++ b/arch/arm/mach-dove/Makefile
@@ -1,3 +1,5 @@
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
+
obj-y += common.o
obj-$(CONFIG_DOVE_LEGACY) += irq.o mpp.o
obj-$(CONFIG_PCI) += pcie.o
diff --git a/arch/arm/mach-dove/include/mach/uncompress.h b/arch/arm/mach-dove/include/mach/uncompress.h
deleted file mode 100644
index 7a4bd88..0000000
--- a/arch/arm/mach-dove/include/mach/uncompress.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define UART0_PHYS_BASE (0xf1000000 + 0x12000)
-
-#define UART_THR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x0))
-#define UART_LSR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x14))
-
-#define LSR_THRE 0x20
-
-static void putc(const char c)
-{
- int i;
-
- for (i = 0; i < 0x1000; i++) {
- /* Transmit fifo not full? */
- if (*UART_LSR & LSR_THRE)
- break;
- }
-
- *UART_THR = c;
-}
-
-static void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig
index f2d309d..a32575f 100644
--- a/arch/arm/mach-mv78xx0/Kconfig
+++ b/arch/arm/mach-mv78xx0/Kconfig
@@ -1,6 +1,15 @@
-if ARCH_MV78XX0
+menuconfig ARCH_MV78XX0
+ bool "Marvell MV78xx0" if ARCH_MULTI_V5
+ select ARCH_REQUIRE_GPIOLIB
+ select CPU_FEROCEON
+ select MVEBU_MBUS
+ select PCI
+ select PLAT_ORION_LEGACY
+ help
+ Support for the following Marvell MV78xx0 series SoCs:
+ MV781x0, MV782x0.
-menu "Marvell MV78xx0 Implementations"
+if ARCH_MV78XX0
config MACH_DB78X00_BP
bool "Marvell DB-78x00-BP Development Board"
@@ -20,6 +29,4 @@
Say 'Y' here if you want your kernel to support the
Buffalo WXL Nas.
-endmenu
-
endif
diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile
index 7cd0463..ddb3aa9 100644
--- a/arch/arm/mach-mv78xx0/Makefile
+++ b/arch/arm/mach-mv78xx0/Makefile
@@ -1,3 +1,5 @@
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
+
obj-y += common.o mpp.o irq.o pcie.o
obj-$(CONFIG_MACH_DB78X00_BP) += db78x00-bp-setup.o
obj-$(CONFIG_MACH_RD78X00_MASA) += rd78x00-masa-setup.o
diff --git a/arch/arm/mach-mv78xx0/include/mach/uncompress.h b/arch/arm/mach-mv78xx0/include/mach/uncompress.h
deleted file mode 100644
index 2787ef3..0000000
--- a/arch/arm/mach-mv78xx0/include/mach/uncompress.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-
-#define UART0_PHYS_BASE (0xf1000000 + 0x12000)
-#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
- unsigned char *base = SERIAL_BASE;
- int i;
-
- for (i = 0; i < 0x1000; i++) {
- if (base[UART_LSR << 2] & UART_LSR_THRE)
- break;
- barrier();
- }
-
- base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
- unsigned char *base = SERIAL_BASE;
- unsigned char mask;
- int i;
-
- mask = UART_LSR_TEMT | UART_LSR_THRE;
-
- for (i = 0; i < 0x1000; i++) {
- if ((base[UART_LSR << 2] & mask) == mask)
- break;
- barrier();
- }
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 08d2be2..83aa966 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -1,6 +1,18 @@
-if ARCH_ORION5X
+menuconfig ARCH_ORION5X
+ bool "Marvell Orion"
+ depends on MMU && ARCH_MULTI_V5
+ select ARCH_REQUIRE_GPIOLIB
+ select CPU_FEROCEON
+ select GENERIC_CLOCKEVENTS
+ select MVEBU_MBUS
+ select PCI
+ select PLAT_ORION_LEGACY
+ help
+ Support for the following Marvell Orion 5x series SoCs:
+ Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
+ Orion-2 (5281), Orion-1-90 (6183).
-menu "Orion Implementations"
+if ARCH_ORION5X
config ARCH_ORION5X_DT
bool "Marvell Orion5x Flattened Device Tree"
@@ -160,6 +172,4 @@
Say 'Y' here if you want your kernel to support the
Marvell Orion-1-90 (88F6183) AP GE RD.
-endmenu
-
endif
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index a1e0fbe..4b2502b 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -1,3 +1,5 @@
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
+
obj-y += common.o pci.o irq.o mpp.o
obj-$(CONFIG_MACH_DB88F5281) += db88f5281-setup.o
obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o
diff --git a/arch/arm/mach-orion5x/include/mach/uncompress.h b/arch/arm/mach-orion5x/include/mach/uncompress.h
deleted file mode 100644
index 25e5cb9..0000000
--- a/arch/arm/mach-orion5x/include/mach/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-
-#define UART0_PHYS_BASE (0xf1000000 + 0x12000)
-#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
- unsigned char *base = SERIAL_BASE;
- int i;
-
- for (i = 0; i < 0x1000; i++) {
- if (base[UART_LSR << 2] & UART_LSR_THRE)
- break;
- barrier();
- }
-
- base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
- unsigned char *base = SERIAL_BASE;
- unsigned char mask;
- int i;
-
- mask = UART_LSR_TEMT | UART_LSR_THRE;
-
- for (i = 0; i < 0x1000; i++) {
- if ((base[UART_LSR << 2] & mask) == mask)
- break;
- barrier();
- }
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
