blob: ce7cd9b96542033e2f5063b51f80016962ad5f73 [file] [log] [blame]
/*
* Copyright 2003 Digi International (www.digi.com)
* Scott H Kilau <Scott_Kilau at digi dot com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
* implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
*
*************************************************************************
*
* Driver includes
*
*************************************************************************/
#ifndef __DGNC_DRIVER_H
#define __DGNC_DRIVER_H
#include <linux/types.h>
#include <linux/tty.h>
#include <linux/interrupt.h>
#include "digi.h" /* Digi specific ioctl header */
#include "dgnc_sysfs.h" /* Support for SYSFS */
/*************************************************************************
*
* Driver defines
*
*************************************************************************/
/* Driver identification and error statments */
#define PROCSTR "dgnc" /* /proc entries */
#define DEVSTR "/dev/dg/dgnc" /* /dev entries */
#define DRVSTR "dgnc" /* Driver name string */
#define DG_PART "40002369_F" /* RPM part number */
#define TRC_TO_CONSOLE 1
/* Number of boards we support at once. */
#define MAXBOARDS 20
#define MAXPORTS 8
#define MAXTTYNAMELEN 200
/* Our 3 magic numbers for our board, channel and unit structs */
#define DGNC_BOARD_MAGIC 0x5c6df104
#define DGNC_CHANNEL_MAGIC 0x6c6df104
#define DGNC_UNIT_MAGIC 0x7c6df104
/* Serial port types */
#define DGNC_SERIAL 0
#define DGNC_PRINT 1
#define SERIAL_TYPE_NORMAL 1
#define PORT_NUM(dev) ((dev) & 0x7f)
#define IS_PRINT(dev) (((dev) & 0xff) >= 0x80)
/* MAX number of stop characters we will send
* when our read queue is getting full
*/
#define MAX_STOPS_SENT 5
/* 4 extra for alignment play space */
#define WRITEBUFLEN ((4096) + 4)
#define dgnc_jiffies_from_ms(a) (((a) * HZ) / 1000)
/*
* Define a local default termios struct. All ports will be created
* with this termios initially. This is the same structure that is defined
* as the default in tty_io.c with the same settings overridden as in serial.c
*
* In short, this should match the internal serial ports' defaults.
*/
#define DEFAULT_IFLAGS (ICRNL | IXON)
#define DEFAULT_OFLAGS (OPOST | ONLCR)
#define DEFAULT_CFLAGS (B9600 | CS8 | CREAD | HUPCL | CLOCAL)
#define DEFAULT_LFLAGS (ISIG | ICANON | ECHO | ECHOE | ECHOK | \
ECHOCTL | ECHOKE | IEXTEN)
#ifndef _POSIX_VDISABLE
#define _POSIX_VDISABLE '\0'
#endif
/*
* All the possible states the driver can be while being loaded.
*/
enum {
DRIVER_INITIALIZED = 0,
DRIVER_READY
};
/*
* All the possible states the board can be while booting up.
*/
enum {
BOARD_FAILED = 0,
BOARD_FOUND,
BOARD_READY
};
/*************************************************************************
*
* Structures and closely related defines.
*
*************************************************************************/
struct dgnc_board;
struct channel_t;
/************************************************************************
* Per board operations structure *
************************************************************************/
struct board_ops {
void (*tasklet)(unsigned long data);
irqreturn_t (*intr)(int irq, void *voidbrd);
void (*uart_init)(struct channel_t *ch);
void (*uart_off)(struct channel_t *ch);
int (*drain)(struct tty_struct *tty, uint seconds);
void (*param)(struct tty_struct *tty);
void (*vpd)(struct dgnc_board *brd);
void (*assert_modem_signals)(struct channel_t *ch);
void (*flush_uart_write)(struct channel_t *ch);
void (*flush_uart_read)(struct channel_t *ch);
void (*disable_receiver)(struct channel_t *ch);
void (*enable_receiver)(struct channel_t *ch);
void (*send_break)(struct channel_t *ch, int);
void (*send_start_character)(struct channel_t *ch);
void (*send_stop_character)(struct channel_t *ch);
void (*copy_data_from_queue_to_uart)(struct channel_t *ch);
uint (*get_uart_bytes_left)(struct channel_t *ch);
void (*send_immediate_char)(struct channel_t *ch, unsigned char);
};
/************************************************************************
* Device flag definitions for bd_flags.
************************************************************************/
#define BD_IS_PCI_EXPRESS 0x0001 /* Is a PCI Express board */
/*
* Per-board information
*/
struct dgnc_board {
int magic; /* Board Magic number. */
int boardnum; /* Board number: 0-32 */
int type; /* Type of board */
char *name; /* Product Name */
struct pci_dev *pdev; /* Pointer to the pci_dev struct */
unsigned long bd_flags; /* Board flags */
u16 vendor; /* PCI vendor ID */
u16 device; /* PCI device ID */
u16 subvendor; /* PCI subsystem vendor ID */
u16 subdevice; /* PCI subsystem device ID */
unsigned char rev; /* PCI revision ID */
uint pci_bus; /* PCI bus value */
uint pci_slot; /* PCI slot value */
uint maxports; /* MAX ports this board can handle */
unsigned char dvid; /* Board specific device id */
unsigned char vpd[128]; /* VPD of board, if found */
unsigned char serial_num[20]; /* Serial number of board,
* if found in VPD
*/
spinlock_t bd_lock; /* Used to protect board */
spinlock_t bd_intr_lock; /* Used to protect the poller tasklet
* and the interrupt routine from each
* other.
*/
uint state; /* State of card. */
wait_queue_head_t state_wait; /* Place to sleep on for state change */
struct tasklet_struct helper_tasklet; /* Poll helper tasklet */
uint nasync; /* Number of ports on card */
uint irq; /* Interrupt request number */
ulong intr_count; /* Count of interrupts */
ulong intr_modem; /* Count of interrupts */
ulong intr_tx; /* Count of interrupts */
ulong intr_rx; /* Count of interrupts */
ulong membase; /* Start of base memory of the card */
ulong membase_end; /* End of base memory of the card */
u8 __iomem *re_map_membase; /* Remapped memory of the card */
ulong iobase; /* Start of io base of the card */
ulong iobase_end; /* End of io base of the card */
uint bd_uart_offset; /* Space between each UART */
struct channel_t *channels[MAXPORTS]; /* array of pointers
* to our channels.
*/
struct tty_driver SerialDriver;
char SerialName[200];
struct tty_driver PrintDriver;
char PrintName[200];
bool dgnc_Major_Serial_Registered;
bool dgnc_Major_TransparentPrint_Registered;
uint dgnc_Serial_Major;
uint dgnc_TransparentPrint_Major;
uint TtyRefCnt;
u16 dpatype; /* The board "type",
* as defined by DPA
*/
u16 dpastatus; /* The board "status",
* as defined by DPA
*/
/*
* Mgmt data.
*/
char *msgbuf_head;
char *msgbuf;
uint bd_dividend; /* Board/UARTs specific dividend */
struct board_ops *bd_ops;
/* /proc/<board> entries */
struct proc_dir_entry *proc_entry_pointer;
struct dgnc_proc_entry *dgnc_board_table;
};
/************************************************************************
* Unit flag definitions for un_flags.
************************************************************************/
#define UN_ISOPEN 0x0001 /* Device is open */
#define UN_CLOSING 0x0002 /* Line is being closed */
#define UN_IMM 0x0004 /* Service immediately */
#define UN_BUSY 0x0008 /* Some work this channel */
#define UN_BREAKI 0x0010 /* Input break received */
#define UN_PWAIT 0x0020 /* Printer waiting for terminal */
#define UN_TIME 0x0040 /* Waiting on time */
#define UN_EMPTY 0x0080 /* Waiting output queue empty */
#define UN_LOW 0x0100 /* Waiting output low water mark*/
#define UN_EXCL_OPEN 0x0200 /* Open for exclusive use */
#define UN_WOPEN 0x0400 /* Device waiting for open */
#define UN_WIOCTL 0x0800 /* Device waiting for open */
#define UN_HANGUP 0x8000 /* Carrier lost */
struct device;
/************************************************************************
* Structure for terminal or printer unit.
************************************************************************/
struct un_t {
int magic; /* Unit Magic Number. */
struct channel_t *un_ch;
ulong un_time;
uint un_type;
uint un_open_count; /* Counter of opens to port */
struct tty_struct *un_tty;/* Pointer to unit tty structure */
uint un_flags; /* Unit flags */
wait_queue_head_t un_flags_wait; /* Place to sleep to wait on unit */
uint un_dev; /* Minor device number */
struct device *un_sysfs;
};
/************************************************************************
* Device flag definitions for ch_flags.
************************************************************************/
#define CH_PRON 0x0001 /* Printer on string */
#define CH_STOP 0x0002 /* Output is stopped */
#define CH_STOPI 0x0004 /* Input is stopped */
#define CH_CD 0x0008 /* Carrier is present */
#define CH_FCAR 0x0010 /* Carrier forced on */
#define CH_HANGUP 0x0020 /* Hangup received */
#define CH_RECEIVER_OFF 0x0040 /* Receiver is off */
#define CH_OPENING 0x0080 /* Port in fragile open state */
#define CH_CLOSING 0x0100 /* Port in fragile close state */
#define CH_FIFO_ENABLED 0x0200 /* Port has FIFOs enabled */
#define CH_TX_FIFO_EMPTY 0x0400 /* TX Fifo is completely empty */
#define CH_TX_FIFO_LWM 0x0800 /* TX Fifo is below Low Water */
#define CH_BREAK_SENDING 0x1000 /* Break is being sent */
#define CH_LOOPBACK 0x2000 /* Channel is in lookback mode */
#define CH_BAUD0 0x08000 /* Used for checking B0 transitions */
#define CH_FORCED_STOP 0x20000 /* Output is forcibly stopped */
#define CH_FORCED_STOPI 0x40000 /* Input is forcibly stopped */
/* Our Read/Error/Write queue sizes */
#define RQUEUEMASK 0x1FFF /* 8 K - 1 */
#define EQUEUEMASK 0x1FFF /* 8 K - 1 */
#define WQUEUEMASK 0x0FFF /* 4 K - 1 */
#define RQUEUESIZE (RQUEUEMASK + 1)
#define EQUEUESIZE RQUEUESIZE
#define WQUEUESIZE (WQUEUEMASK + 1)
/************************************************************************
* Channel information structure.
************************************************************************/
struct channel_t {
int magic; /* Channel Magic Number */
struct dgnc_board *ch_bd; /* Board structure pointer */
struct digi_t ch_digi; /* Transparent Print structure */
struct un_t ch_tun; /* Terminal unit info */
struct un_t ch_pun; /* Printer unit info */
spinlock_t ch_lock; /* provide for serialization */
wait_queue_head_t ch_flags_wait;
uint ch_portnum; /* Port number, 0 offset. */
uint ch_open_count; /* open count */
uint ch_flags; /* Channel flags */
ulong ch_close_delay; /* How long we should
* drop RTS/DTR for
*/
ulong ch_cpstime; /* Time for CPS calculations */
tcflag_t ch_c_iflag; /* channel iflags */
tcflag_t ch_c_cflag; /* channel cflags */
tcflag_t ch_c_oflag; /* channel oflags */
tcflag_t ch_c_lflag; /* channel lflags */
unsigned char ch_stopc; /* Stop character */
unsigned char ch_startc; /* Start character */
uint ch_old_baud; /* Cache of the current baud */
uint ch_custom_speed;/* Custom baud, if set */
uint ch_wopen; /* Waiting for open process cnt */
unsigned char ch_mostat; /* FEP output modem status */
unsigned char ch_mistat; /* FEP input modem status */
struct neo_uart_struct __iomem *ch_neo_uart; /* Pointer to the
* "mapped" UART struct
*/
struct cls_uart_struct __iomem *ch_cls_uart; /* Pointer to the
* "mapped" UART struct
*/
unsigned char ch_cached_lsr; /* Cached value of the LSR register */
unsigned char *ch_rqueue; /* Our read queue buffer - malloc'ed */
ushort ch_r_head; /* Head location of the read queue */
ushort ch_r_tail; /* Tail location of the read queue */
unsigned char *ch_equeue; /* Our error queue buffer - malloc'ed */
ushort ch_e_head; /* Head location of the error queue */
ushort ch_e_tail; /* Tail location of the error queue */
unsigned char *ch_wqueue; /* Our write queue buffer - malloc'ed */
ushort ch_w_head; /* Head location of the write queue */
ushort ch_w_tail; /* Tail location of the write queue */
ulong ch_rxcount; /* total of data received so far */
ulong ch_txcount; /* total of data transmitted so far */
unsigned char ch_r_tlevel; /* Receive Trigger level */
unsigned char ch_t_tlevel; /* Transmit Trigger level */
unsigned char ch_r_watermark; /* Receive Watermark */
ulong ch_stop_sending_break; /* Time we should STOP
* sending a break
*/
uint ch_stops_sent; /* How many times I have sent a stop
* character to try to stop the other
* guy sending.
*/
ulong ch_err_parity; /* Count of parity errors on channel */
ulong ch_err_frame; /* Count of framing errors on channel */
ulong ch_err_break; /* Count of breaks on channel */
ulong ch_err_overrun; /* Count of overruns on channel */
ulong ch_xon_sends; /* Count of xons transmitted */
ulong ch_xoff_sends; /* Count of xoffs transmitted */
ulong ch_intr_modem; /* Count of interrupts */
ulong ch_intr_tx; /* Count of interrupts */
ulong ch_intr_rx; /* Count of interrupts */
/* /proc/<board>/<channel> entries */
struct proc_dir_entry *proc_entry_pointer;
struct dgnc_proc_entry *dgnc_channel_table;
};
/*
* Our Global Variables.
*/
extern uint dgnc_Major; /* Our driver/mgmt major */
extern int dgnc_poll_tick; /* Poll interval - 20 ms */
extern spinlock_t dgnc_global_lock; /* Driver global spinlock */
extern spinlock_t dgnc_poll_lock; /* Poll scheduling lock */
extern uint dgnc_NumBoards; /* Total number of boards */
extern struct dgnc_board *dgnc_Board[MAXBOARDS]; /* Array of board
* structs
*/
#endif