|  | /* linux/net/ipv4/arp.c | 
|  | * | 
|  | * Copyright (C) 1994 by Florian  La Roche | 
|  | * | 
|  | * This module implements the Address Resolution Protocol ARP (RFC 826), | 
|  | * which is used to convert IP addresses (or in the future maybe other | 
|  | * high-level addresses) into a low-level hardware address (like an Ethernet | 
|  | * address). | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * as published by the Free Software Foundation; either version | 
|  | * 2 of the License, or (at your option) any later version. | 
|  | * | 
|  | * Fixes: | 
|  | *		Alan Cox	:	Removed the Ethernet assumptions in | 
|  | *					Florian's code | 
|  | *		Alan Cox	:	Fixed some small errors in the ARP | 
|  | *					logic | 
|  | *		Alan Cox	:	Allow >4K in /proc | 
|  | *		Alan Cox	:	Make ARP add its own protocol entry | 
|  | *		Ross Martin     :       Rewrote arp_rcv() and arp_get_info() | 
|  | *		Stephen Henson	:	Add AX25 support to arp_get_info() | 
|  | *		Alan Cox	:	Drop data when a device is downed. | 
|  | *		Alan Cox	:	Use init_timer(). | 
|  | *		Alan Cox	:	Double lock fixes. | 
|  | *		Martin Seine	:	Move the arphdr structure | 
|  | *					to if_arp.h for compatibility. | 
|  | *					with BSD based programs. | 
|  | *		Andrew Tridgell :       Added ARP netmask code and | 
|  | *					re-arranged proxy handling. | 
|  | *		Alan Cox	:	Changed to use notifiers. | 
|  | *		Niibe Yutaka	:	Reply for this device or proxies only. | 
|  | *		Alan Cox	:	Don't proxy across hardware types! | 
|  | *		Jonathan Naylor :	Added support for NET/ROM. | 
|  | *		Mike Shaver     :       RFC1122 checks. | 
|  | *		Jonathan Naylor :	Only lookup the hardware address for | 
|  | *					the correct hardware type. | 
|  | *		Germano Caronni	:	Assorted subtle races. | 
|  | *		Craig Schlenter :	Don't modify permanent entry | 
|  | *					during arp_rcv. | 
|  | *		Russ Nelson	:	Tidied up a few bits. | 
|  | *		Alexey Kuznetsov:	Major changes to caching and behaviour, | 
|  | *					eg intelligent arp probing and | 
|  | *					generation | 
|  | *					of host down events. | 
|  | *		Alan Cox	:	Missing unlock in device events. | 
|  | *		Eckes		:	ARP ioctl control errors. | 
|  | *		Alexey Kuznetsov:	Arp free fix. | 
|  | *		Manuel Rodriguez:	Gratuitous ARP. | 
|  | *              Jonathan Layes  :       Added arpd support through kerneld | 
|  | *                                      message queue (960314) | 
|  | *		Mike Shaver	:	/proc/sys/net/ipv4/arp_* support | 
|  | *		Mike McLagan    :	Routing by source | 
|  | *		Stuart Cheshire	:	Metricom and grat arp fixes | 
|  | *					*** FOR 2.1 clean this up *** | 
|  | *		Lawrence V. Stefani: (08/12/96) Added FDDI support. | 
|  | *		Alan Cox	:	Took the AP1000 nasty FDDI hack and | 
|  | *					folded into the mainstream FDDI code. | 
|  | *					Ack spit, Linus how did you allow that | 
|  | *					one in... | 
|  | *		Jes Sorensen	:	Make FDDI work again in 2.1.x and | 
|  | *					clean up the APFDDI & gen. FDDI bits. | 
|  | *		Alexey Kuznetsov:	new arp state machine; | 
|  | *					now it is in net/core/neighbour.c. | 
|  | *		Krzysztof Halasa:	Added Frame Relay ARP support. | 
|  | *		Arnaldo C. Melo :	convert /proc/net/arp to seq_file | 
|  | *		Shmulik Hen:		Split arp_send to arp_create and | 
|  | *					arp_xmit so intermediate drivers like | 
|  | *					bonding can change the skb before | 
|  | *					sending (e.g. insert 8021q tag). | 
|  | *		Harald Welte	:	convert to make use of jenkins hash | 
|  | *		Jesper D. Brouer:       Proxy ARP PVLAN RFC 3069 support. | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/capability.h> | 
|  | #include <linux/socket.h> | 
|  | #include <linux/sockios.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/in.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/inet.h> | 
|  | #include <linux/inetdevice.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/fddidevice.h> | 
|  | #include <linux/if_arp.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/proc_fs.h> | 
|  | #include <linux/seq_file.h> | 
|  | #include <linux/stat.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/net.h> | 
|  | #include <linux/rcupdate.h> | 
|  | #include <linux/slab.h> | 
|  | #ifdef CONFIG_SYSCTL | 
|  | #include <linux/sysctl.h> | 
|  | #endif | 
|  |  | 
|  | #include <net/net_namespace.h> | 
|  | #include <net/ip.h> | 
|  | #include <net/icmp.h> | 
|  | #include <net/route.h> | 
|  | #include <net/protocol.h> | 
|  | #include <net/tcp.h> | 
|  | #include <net/sock.h> | 
|  | #include <net/arp.h> | 
|  | #include <net/ax25.h> | 
|  | #include <net/netrom.h> | 
|  | #include <net/dst_metadata.h> | 
|  | #include <net/ip_tunnels.h> | 
|  |  | 
|  | #include <linux/uaccess.h> | 
|  |  | 
|  | #include <linux/netfilter_arp.h> | 
|  |  | 
|  | /* | 
|  | *	Interface to generic neighbour cache. | 
|  | */ | 
|  | static u32 arp_hash(const void *pkey, const struct net_device *dev, __u32 *hash_rnd); | 
|  | static bool arp_key_eq(const struct neighbour *n, const void *pkey); | 
|  | static int arp_constructor(struct neighbour *neigh); | 
|  | static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb); | 
|  | static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb); | 
|  | static void parp_redo(struct sk_buff *skb); | 
|  |  | 
|  | static const struct neigh_ops arp_generic_ops = { | 
|  | .family =		AF_INET, | 
|  | .solicit =		arp_solicit, | 
|  | .error_report =		arp_error_report, | 
|  | .output =		neigh_resolve_output, | 
|  | .connected_output =	neigh_connected_output, | 
|  | }; | 
|  |  | 
|  | static const struct neigh_ops arp_hh_ops = { | 
|  | .family =		AF_INET, | 
|  | .solicit =		arp_solicit, | 
|  | .error_report =		arp_error_report, | 
|  | .output =		neigh_resolve_output, | 
|  | .connected_output =	neigh_resolve_output, | 
|  | }; | 
|  |  | 
|  | static const struct neigh_ops arp_direct_ops = { | 
|  | .family =		AF_INET, | 
|  | .output =		neigh_direct_output, | 
|  | .connected_output =	neigh_direct_output, | 
|  | }; | 
|  |  | 
|  | struct neigh_table arp_tbl = { | 
|  | .family		= AF_INET, | 
|  | .key_len	= 4, | 
|  | .protocol	= cpu_to_be16(ETH_P_IP), | 
|  | .hash		= arp_hash, | 
|  | .key_eq		= arp_key_eq, | 
|  | .constructor	= arp_constructor, | 
|  | .proxy_redo	= parp_redo, | 
|  | .id		= "arp_cache", | 
|  | .parms		= { | 
|  | .tbl			= &arp_tbl, | 
|  | .reachable_time		= 30 * HZ, | 
|  | .data	= { | 
|  | [NEIGH_VAR_MCAST_PROBES] = 3, | 
|  | [NEIGH_VAR_UCAST_PROBES] = 3, | 
|  | [NEIGH_VAR_RETRANS_TIME] = 1 * HZ, | 
|  | [NEIGH_VAR_BASE_REACHABLE_TIME] = 30 * HZ, | 
|  | [NEIGH_VAR_DELAY_PROBE_TIME] = 5 * HZ, | 
|  | [NEIGH_VAR_GC_STALETIME] = 60 * HZ, | 
|  | [NEIGH_VAR_QUEUE_LEN_BYTES] = 64 * 1024, | 
|  | [NEIGH_VAR_PROXY_QLEN] = 64, | 
|  | [NEIGH_VAR_ANYCAST_DELAY] = 1 * HZ, | 
|  | [NEIGH_VAR_PROXY_DELAY]	= (8 * HZ) / 10, | 
|  | [NEIGH_VAR_LOCKTIME] = 1 * HZ, | 
|  | }, | 
|  | }, | 
|  | .gc_interval	= 30 * HZ, | 
|  | .gc_thresh1	= 128, | 
|  | .gc_thresh2	= 512, | 
|  | .gc_thresh3	= 1024, | 
|  | }; | 
|  | EXPORT_SYMBOL(arp_tbl); | 
|  |  | 
|  | int arp_mc_map(__be32 addr, u8 *haddr, struct net_device *dev, int dir) | 
|  | { | 
|  | switch (dev->type) { | 
|  | case ARPHRD_ETHER: | 
|  | case ARPHRD_FDDI: | 
|  | case ARPHRD_IEEE802: | 
|  | ip_eth_mc_map(addr, haddr); | 
|  | return 0; | 
|  | case ARPHRD_INFINIBAND: | 
|  | ip_ib_mc_map(addr, dev->broadcast, haddr); | 
|  | return 0; | 
|  | case ARPHRD_IPGRE: | 
|  | ip_ipgre_mc_map(addr, dev->broadcast, haddr); | 
|  | return 0; | 
|  | default: | 
|  | if (dir) { | 
|  | memcpy(haddr, dev->broadcast, dev->addr_len); | 
|  | return 0; | 
|  | } | 
|  | } | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  |  | 
|  | static u32 arp_hash(const void *pkey, | 
|  | const struct net_device *dev, | 
|  | __u32 *hash_rnd) | 
|  | { | 
|  | return arp_hashfn(pkey, dev, hash_rnd); | 
|  | } | 
|  |  | 
|  | static bool arp_key_eq(const struct neighbour *neigh, const void *pkey) | 
|  | { | 
|  | return neigh_key_eq32(neigh, pkey); | 
|  | } | 
|  |  | 
|  | static int arp_constructor(struct neighbour *neigh) | 
|  | { | 
|  | __be32 addr = *(__be32 *)neigh->primary_key; | 
|  | struct net_device *dev = neigh->dev; | 
|  | struct in_device *in_dev; | 
|  | struct neigh_parms *parms; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | in_dev = __in_dev_get_rcu(dev); | 
|  | if (!in_dev) { | 
|  | rcu_read_unlock(); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | neigh->type = inet_addr_type_dev_table(dev_net(dev), dev, addr); | 
|  |  | 
|  | parms = in_dev->arp_parms; | 
|  | __neigh_parms_put(neigh->parms); | 
|  | neigh->parms = neigh_parms_clone(parms); | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | if (!dev->header_ops) { | 
|  | neigh->nud_state = NUD_NOARP; | 
|  | neigh->ops = &arp_direct_ops; | 
|  | neigh->output = neigh_direct_output; | 
|  | } else { | 
|  | /* Good devices (checked by reading texts, but only Ethernet is | 
|  | tested) | 
|  |  | 
|  | ARPHRD_ETHER: (ethernet, apfddi) | 
|  | ARPHRD_FDDI: (fddi) | 
|  | ARPHRD_IEEE802: (tr) | 
|  | ARPHRD_METRICOM: (strip) | 
|  | ARPHRD_ARCNET: | 
|  | etc. etc. etc. | 
|  |  | 
|  | ARPHRD_IPDDP will also work, if author repairs it. | 
|  | I did not it, because this driver does not work even | 
|  | in old paradigm. | 
|  | */ | 
|  |  | 
|  | if (neigh->type == RTN_MULTICAST) { | 
|  | neigh->nud_state = NUD_NOARP; | 
|  | arp_mc_map(addr, neigh->ha, dev, 1); | 
|  | } else if (dev->flags & (IFF_NOARP | IFF_LOOPBACK)) { | 
|  | neigh->nud_state = NUD_NOARP; | 
|  | memcpy(neigh->ha, dev->dev_addr, dev->addr_len); | 
|  | } else if (neigh->type == RTN_BROADCAST || | 
|  | (dev->flags & IFF_POINTOPOINT)) { | 
|  | neigh->nud_state = NUD_NOARP; | 
|  | memcpy(neigh->ha, dev->broadcast, dev->addr_len); | 
|  | } | 
|  |  | 
|  | if (dev->header_ops->cache) | 
|  | neigh->ops = &arp_hh_ops; | 
|  | else | 
|  | neigh->ops = &arp_generic_ops; | 
|  |  | 
|  | if (neigh->nud_state & NUD_VALID) | 
|  | neigh->output = neigh->ops->connected_output; | 
|  | else | 
|  | neigh->output = neigh->ops->output; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb) | 
|  | { | 
|  | dst_link_failure(skb); | 
|  | kfree_skb(skb); | 
|  | } | 
|  |  | 
|  | /* Create and send an arp packet. */ | 
|  | static void arp_send_dst(int type, int ptype, __be32 dest_ip, | 
|  | struct net_device *dev, __be32 src_ip, | 
|  | const unsigned char *dest_hw, | 
|  | const unsigned char *src_hw, | 
|  | const unsigned char *target_hw, | 
|  | struct dst_entry *dst) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | /* arp on this interface. */ | 
|  | if (dev->flags & IFF_NOARP) | 
|  | return; | 
|  |  | 
|  | skb = arp_create(type, ptype, dest_ip, dev, src_ip, | 
|  | dest_hw, src_hw, target_hw); | 
|  | if (!skb) | 
|  | return; | 
|  |  | 
|  | skb_dst_set(skb, dst_clone(dst)); | 
|  | arp_xmit(skb); | 
|  | } | 
|  |  | 
|  | void arp_send(int type, int ptype, __be32 dest_ip, | 
|  | struct net_device *dev, __be32 src_ip, | 
|  | const unsigned char *dest_hw, const unsigned char *src_hw, | 
|  | const unsigned char *target_hw) | 
|  | { | 
|  | arp_send_dst(type, ptype, dest_ip, dev, src_ip, dest_hw, src_hw, | 
|  | target_hw, NULL); | 
|  | } | 
|  | EXPORT_SYMBOL(arp_send); | 
|  |  | 
|  | static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb) | 
|  | { | 
|  | __be32 saddr = 0; | 
|  | u8 dst_ha[MAX_ADDR_LEN], *dst_hw = NULL; | 
|  | struct net_device *dev = neigh->dev; | 
|  | __be32 target = *(__be32 *)neigh->primary_key; | 
|  | int probes = atomic_read(&neigh->probes); | 
|  | struct in_device *in_dev; | 
|  | struct dst_entry *dst = NULL; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | in_dev = __in_dev_get_rcu(dev); | 
|  | if (!in_dev) { | 
|  | rcu_read_unlock(); | 
|  | return; | 
|  | } | 
|  | switch (IN_DEV_ARP_ANNOUNCE(in_dev)) { | 
|  | default: | 
|  | case 0:		/* By default announce any local IP */ | 
|  | if (skb && inet_addr_type_dev_table(dev_net(dev), dev, | 
|  | ip_hdr(skb)->saddr) == RTN_LOCAL) | 
|  | saddr = ip_hdr(skb)->saddr; | 
|  | break; | 
|  | case 1:		/* Restrict announcements of saddr in same subnet */ | 
|  | if (!skb) | 
|  | break; | 
|  | saddr = ip_hdr(skb)->saddr; | 
|  | if (inet_addr_type_dev_table(dev_net(dev), dev, | 
|  | saddr) == RTN_LOCAL) { | 
|  | /* saddr should be known to target */ | 
|  | if (inet_addr_onlink(in_dev, target, saddr)) | 
|  | break; | 
|  | } | 
|  | saddr = 0; | 
|  | break; | 
|  | case 2:		/* Avoid secondary IPs, get a primary/preferred one */ | 
|  | break; | 
|  | } | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | if (!saddr) | 
|  | saddr = inet_select_addr(dev, target, RT_SCOPE_LINK); | 
|  |  | 
|  | probes -= NEIGH_VAR(neigh->parms, UCAST_PROBES); | 
|  | if (probes < 0) { | 
|  | if (!(neigh->nud_state & NUD_VALID)) | 
|  | pr_debug("trying to ucast probe in NUD_INVALID\n"); | 
|  | neigh_ha_snapshot(dst_ha, neigh, dev); | 
|  | dst_hw = dst_ha; | 
|  | } else { | 
|  | probes -= NEIGH_VAR(neigh->parms, APP_PROBES); | 
|  | if (probes < 0) { | 
|  | neigh_app_ns(neigh); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (skb && !(dev->priv_flags & IFF_XMIT_DST_RELEASE)) | 
|  | dst = skb_dst(skb); | 
|  | arp_send_dst(ARPOP_REQUEST, ETH_P_ARP, target, dev, saddr, | 
|  | dst_hw, dev->dev_addr, NULL, dst); | 
|  | } | 
|  |  | 
|  | static int arp_ignore(struct in_device *in_dev, __be32 sip, __be32 tip) | 
|  | { | 
|  | struct net *net = dev_net(in_dev->dev); | 
|  | int scope; | 
|  |  | 
|  | switch (IN_DEV_ARP_IGNORE(in_dev)) { | 
|  | case 0:	/* Reply, the tip is already validated */ | 
|  | return 0; | 
|  | case 1:	/* Reply only if tip is configured on the incoming interface */ | 
|  | sip = 0; | 
|  | scope = RT_SCOPE_HOST; | 
|  | break; | 
|  | case 2:	/* | 
|  | * Reply only if tip is configured on the incoming interface | 
|  | * and is in same subnet as sip | 
|  | */ | 
|  | scope = RT_SCOPE_HOST; | 
|  | break; | 
|  | case 3:	/* Do not reply for scope host addresses */ | 
|  | sip = 0; | 
|  | scope = RT_SCOPE_LINK; | 
|  | in_dev = NULL; | 
|  | break; | 
|  | case 4:	/* Reserved */ | 
|  | case 5: | 
|  | case 6: | 
|  | case 7: | 
|  | return 0; | 
|  | case 8:	/* Do not reply */ | 
|  | return 1; | 
|  | default: | 
|  | return 0; | 
|  | } | 
|  | return !inet_confirm_addr(net, in_dev, sip, tip, scope); | 
|  | } | 
|  |  | 
|  | static int arp_filter(__be32 sip, __be32 tip, struct net_device *dev) | 
|  | { | 
|  | struct rtable *rt; | 
|  | int flag = 0; | 
|  | /*unsigned long now; */ | 
|  | struct net *net = dev_net(dev); | 
|  |  | 
|  | rt = ip_route_output(net, sip, tip, 0, 0); | 
|  | if (IS_ERR(rt)) | 
|  | return 1; | 
|  | if (rt->dst.dev != dev) { | 
|  | __NET_INC_STATS(net, LINUX_MIB_ARPFILTER); | 
|  | flag = 1; | 
|  | } | 
|  | ip_rt_put(rt); | 
|  | return flag; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check if we can use proxy ARP for this path | 
|  | */ | 
|  | static inline int arp_fwd_proxy(struct in_device *in_dev, | 
|  | struct net_device *dev,	struct rtable *rt) | 
|  | { | 
|  | struct in_device *out_dev; | 
|  | int imi, omi = -1; | 
|  |  | 
|  | if (rt->dst.dev == dev) | 
|  | return 0; | 
|  |  | 
|  | if (!IN_DEV_PROXY_ARP(in_dev)) | 
|  | return 0; | 
|  | imi = IN_DEV_MEDIUM_ID(in_dev); | 
|  | if (imi == 0) | 
|  | return 1; | 
|  | if (imi == -1) | 
|  | return 0; | 
|  |  | 
|  | /* place to check for proxy_arp for routes */ | 
|  |  | 
|  | out_dev = __in_dev_get_rcu(rt->dst.dev); | 
|  | if (out_dev) | 
|  | omi = IN_DEV_MEDIUM_ID(out_dev); | 
|  |  | 
|  | return omi != imi && omi != -1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check for RFC3069 proxy arp private VLAN (allow to send back to same dev) | 
|  | * | 
|  | * RFC3069 supports proxy arp replies back to the same interface.  This | 
|  | * is done to support (ethernet) switch features, like RFC 3069, where | 
|  | * the individual ports are not allowed to communicate with each | 
|  | * other, BUT they are allowed to talk to the upstream router.  As | 
|  | * described in RFC 3069, it is possible to allow these hosts to | 
|  | * communicate through the upstream router, by proxy_arp'ing. | 
|  | * | 
|  | * RFC 3069: "VLAN Aggregation for Efficient IP Address Allocation" | 
|  | * | 
|  | *  This technology is known by different names: | 
|  | *    In RFC 3069 it is called VLAN Aggregation. | 
|  | *    Cisco and Allied Telesyn call it Private VLAN. | 
|  | *    Hewlett-Packard call it Source-Port filtering or port-isolation. | 
|  | *    Ericsson call it MAC-Forced Forwarding (RFC Draft). | 
|  | * | 
|  | */ | 
|  | static inline int arp_fwd_pvlan(struct in_device *in_dev, | 
|  | struct net_device *dev,	struct rtable *rt, | 
|  | __be32 sip, __be32 tip) | 
|  | { | 
|  | /* Private VLAN is only concerned about the same ethernet segment */ | 
|  | if (rt->dst.dev != dev) | 
|  | return 0; | 
|  |  | 
|  | /* Don't reply on self probes (often done by windowz boxes)*/ | 
|  | if (sip == tip) | 
|  | return 0; | 
|  |  | 
|  | if (IN_DEV_PROXY_ARP_PVLAN(in_dev)) | 
|  | return 1; | 
|  | else | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *	Interface to link layer: send routine and receive handler. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | *	Create an arp packet. If dest_hw is not set, we create a broadcast | 
|  | *	message. | 
|  | */ | 
|  | struct sk_buff *arp_create(int type, int ptype, __be32 dest_ip, | 
|  | struct net_device *dev, __be32 src_ip, | 
|  | const unsigned char *dest_hw, | 
|  | const unsigned char *src_hw, | 
|  | const unsigned char *target_hw) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | struct arphdr *arp; | 
|  | unsigned char *arp_ptr; | 
|  | int hlen = LL_RESERVED_SPACE(dev); | 
|  | int tlen = dev->needed_tailroom; | 
|  |  | 
|  | /* | 
|  | *	Allocate a buffer | 
|  | */ | 
|  |  | 
|  | skb = alloc_skb(arp_hdr_len(dev) + hlen + tlen, GFP_ATOMIC); | 
|  | if (!skb) | 
|  | return NULL; | 
|  |  | 
|  | skb_reserve(skb, hlen); | 
|  | skb_reset_network_header(skb); | 
|  | arp = (struct arphdr *) skb_put(skb, arp_hdr_len(dev)); | 
|  | skb->dev = dev; | 
|  | skb->protocol = htons(ETH_P_ARP); | 
|  | if (!src_hw) | 
|  | src_hw = dev->dev_addr; | 
|  | if (!dest_hw) | 
|  | dest_hw = dev->broadcast; | 
|  |  | 
|  | /* | 
|  | *	Fill the device header for the ARP frame | 
|  | */ | 
|  | if (dev_hard_header(skb, dev, ptype, dest_hw, src_hw, skb->len) < 0) | 
|  | goto out; | 
|  |  | 
|  | /* | 
|  | * Fill out the arp protocol part. | 
|  | * | 
|  | * The arp hardware type should match the device type, except for FDDI, | 
|  | * which (according to RFC 1390) should always equal 1 (Ethernet). | 
|  | */ | 
|  | /* | 
|  | *	Exceptions everywhere. AX.25 uses the AX.25 PID value not the | 
|  | *	DIX code for the protocol. Make these device structure fields. | 
|  | */ | 
|  | switch (dev->type) { | 
|  | default: | 
|  | arp->ar_hrd = htons(dev->type); | 
|  | arp->ar_pro = htons(ETH_P_IP); | 
|  | break; | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_AX25) | 
|  | case ARPHRD_AX25: | 
|  | arp->ar_hrd = htons(ARPHRD_AX25); | 
|  | arp->ar_pro = htons(AX25_P_IP); | 
|  | break; | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_NETROM) | 
|  | case ARPHRD_NETROM: | 
|  | arp->ar_hrd = htons(ARPHRD_NETROM); | 
|  | arp->ar_pro = htons(AX25_P_IP); | 
|  | break; | 
|  | #endif | 
|  | #endif | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_FDDI) | 
|  | case ARPHRD_FDDI: | 
|  | arp->ar_hrd = htons(ARPHRD_ETHER); | 
|  | arp->ar_pro = htons(ETH_P_IP); | 
|  | break; | 
|  | #endif | 
|  | } | 
|  |  | 
|  | arp->ar_hln = dev->addr_len; | 
|  | arp->ar_pln = 4; | 
|  | arp->ar_op = htons(type); | 
|  |  | 
|  | arp_ptr = (unsigned char *)(arp + 1); | 
|  |  | 
|  | memcpy(arp_ptr, src_hw, dev->addr_len); | 
|  | arp_ptr += dev->addr_len; | 
|  | memcpy(arp_ptr, &src_ip, 4); | 
|  | arp_ptr += 4; | 
|  |  | 
|  | switch (dev->type) { | 
|  | #if IS_ENABLED(CONFIG_FIREWIRE_NET) | 
|  | case ARPHRD_IEEE1394: | 
|  | break; | 
|  | #endif | 
|  | default: | 
|  | if (target_hw) | 
|  | memcpy(arp_ptr, target_hw, dev->addr_len); | 
|  | else | 
|  | memset(arp_ptr, 0, dev->addr_len); | 
|  | arp_ptr += dev->addr_len; | 
|  | } | 
|  | memcpy(arp_ptr, &dest_ip, 4); | 
|  |  | 
|  | return skb; | 
|  |  | 
|  | out: | 
|  | kfree_skb(skb); | 
|  | return NULL; | 
|  | } | 
|  | EXPORT_SYMBOL(arp_create); | 
|  |  | 
|  | static int arp_xmit_finish(struct net *net, struct sock *sk, struct sk_buff *skb) | 
|  | { | 
|  | return dev_queue_xmit(skb); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *	Send an arp packet. | 
|  | */ | 
|  | void arp_xmit(struct sk_buff *skb) | 
|  | { | 
|  | /* Send it off, maybe filter it using firewalling first.  */ | 
|  | NF_HOOK(NFPROTO_ARP, NF_ARP_OUT, | 
|  | dev_net(skb->dev), NULL, skb, NULL, skb->dev, | 
|  | arp_xmit_finish); | 
|  | } | 
|  | EXPORT_SYMBOL(arp_xmit); | 
|  |  | 
|  | /* | 
|  | *	Process an arp request. | 
|  | */ | 
|  |  | 
|  | static int arp_process(struct net *net, struct sock *sk, struct sk_buff *skb) | 
|  | { | 
|  | struct net_device *dev = skb->dev; | 
|  | struct in_device *in_dev = __in_dev_get_rcu(dev); | 
|  | struct arphdr *arp; | 
|  | unsigned char *arp_ptr; | 
|  | struct rtable *rt; | 
|  | unsigned char *sha; | 
|  | __be32 sip, tip; | 
|  | u16 dev_type = dev->type; | 
|  | int addr_type; | 
|  | struct neighbour *n; | 
|  | struct dst_entry *reply_dst = NULL; | 
|  | bool is_garp = false; | 
|  |  | 
|  | /* arp_rcv below verifies the ARP header and verifies the device | 
|  | * is ARP'able. | 
|  | */ | 
|  |  | 
|  | if (!in_dev) | 
|  | goto out_free_skb; | 
|  |  | 
|  | arp = arp_hdr(skb); | 
|  |  | 
|  | switch (dev_type) { | 
|  | default: | 
|  | if (arp->ar_pro != htons(ETH_P_IP) || | 
|  | htons(dev_type) != arp->ar_hrd) | 
|  | goto out_free_skb; | 
|  | break; | 
|  | case ARPHRD_ETHER: | 
|  | case ARPHRD_FDDI: | 
|  | case ARPHRD_IEEE802: | 
|  | /* | 
|  | * ETHERNET, and Fibre Channel (which are IEEE 802 | 
|  | * devices, according to RFC 2625) devices will accept ARP | 
|  | * hardware types of either 1 (Ethernet) or 6 (IEEE 802.2). | 
|  | * This is the case also of FDDI, where the RFC 1390 says that | 
|  | * FDDI devices should accept ARP hardware of (1) Ethernet, | 
|  | * however, to be more robust, we'll accept both 1 (Ethernet) | 
|  | * or 6 (IEEE 802.2) | 
|  | */ | 
|  | if ((arp->ar_hrd != htons(ARPHRD_ETHER) && | 
|  | arp->ar_hrd != htons(ARPHRD_IEEE802)) || | 
|  | arp->ar_pro != htons(ETH_P_IP)) | 
|  | goto out_free_skb; | 
|  | break; | 
|  | case ARPHRD_AX25: | 
|  | if (arp->ar_pro != htons(AX25_P_IP) || | 
|  | arp->ar_hrd != htons(ARPHRD_AX25)) | 
|  | goto out_free_skb; | 
|  | break; | 
|  | case ARPHRD_NETROM: | 
|  | if (arp->ar_pro != htons(AX25_P_IP) || | 
|  | arp->ar_hrd != htons(ARPHRD_NETROM)) | 
|  | goto out_free_skb; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Understand only these message types */ | 
|  |  | 
|  | if (arp->ar_op != htons(ARPOP_REPLY) && | 
|  | arp->ar_op != htons(ARPOP_REQUEST)) | 
|  | goto out_free_skb; | 
|  |  | 
|  | /* | 
|  | *	Extract fields | 
|  | */ | 
|  | arp_ptr = (unsigned char *)(arp + 1); | 
|  | sha	= arp_ptr; | 
|  | arp_ptr += dev->addr_len; | 
|  | memcpy(&sip, arp_ptr, 4); | 
|  | arp_ptr += 4; | 
|  | switch (dev_type) { | 
|  | #if IS_ENABLED(CONFIG_FIREWIRE_NET) | 
|  | case ARPHRD_IEEE1394: | 
|  | break; | 
|  | #endif | 
|  | default: | 
|  | arp_ptr += dev->addr_len; | 
|  | } | 
|  | memcpy(&tip, arp_ptr, 4); | 
|  | /* | 
|  | *	Check for bad requests for 127.x.x.x and requests for multicast | 
|  | *	addresses.  If this is one such, delete it. | 
|  | */ | 
|  | if (ipv4_is_multicast(tip) || | 
|  | (!IN_DEV_ROUTE_LOCALNET(in_dev) && ipv4_is_loopback(tip))) | 
|  | goto out_free_skb; | 
|  |  | 
|  | /* | 
|  | *	For some 802.11 wireless deployments (and possibly other networks), | 
|  | *	there will be an ARP proxy and gratuitous ARP frames are attacks | 
|  | *	and thus should not be accepted. | 
|  | */ | 
|  | if (sip == tip && IN_DEV_ORCONF(in_dev, DROP_GRATUITOUS_ARP)) | 
|  | goto out_free_skb; | 
|  |  | 
|  | /* | 
|  | *     Special case: We must set Frame Relay source Q.922 address | 
|  | */ | 
|  | if (dev_type == ARPHRD_DLCI) | 
|  | sha = dev->broadcast; | 
|  |  | 
|  | /* | 
|  | *  Process entry.  The idea here is we want to send a reply if it is a | 
|  | *  request for us or if it is a request for someone else that we hold | 
|  | *  a proxy for.  We want to add an entry to our cache if it is a reply | 
|  | *  to us or if it is a request for our address. | 
|  | *  (The assumption for this last is that if someone is requesting our | 
|  | *  address, they are probably intending to talk to us, so it saves time | 
|  | *  if we cache their address.  Their address is also probably not in | 
|  | *  our cache, since ours is not in their cache.) | 
|  | * | 
|  | *  Putting this another way, we only care about replies if they are to | 
|  | *  us, in which case we add them to the cache.  For requests, we care | 
|  | *  about those for us and those for our proxies.  We reply to both, | 
|  | *  and in the case of requests for us we add the requester to the arp | 
|  | *  cache. | 
|  | */ | 
|  |  | 
|  | if (arp->ar_op == htons(ARPOP_REQUEST) && skb_metadata_dst(skb)) | 
|  | reply_dst = (struct dst_entry *) | 
|  | iptunnel_metadata_reply(skb_metadata_dst(skb), | 
|  | GFP_ATOMIC); | 
|  |  | 
|  | /* Special case: IPv4 duplicate address detection packet (RFC2131) */ | 
|  | if (sip == 0) { | 
|  | if (arp->ar_op == htons(ARPOP_REQUEST) && | 
|  | inet_addr_type_dev_table(net, dev, tip) == RTN_LOCAL && | 
|  | !arp_ignore(in_dev, sip, tip)) | 
|  | arp_send_dst(ARPOP_REPLY, ETH_P_ARP, sip, dev, tip, | 
|  | sha, dev->dev_addr, sha, reply_dst); | 
|  | goto out_consume_skb; | 
|  | } | 
|  |  | 
|  | if (arp->ar_op == htons(ARPOP_REQUEST) && | 
|  | ip_route_input_noref(skb, tip, sip, 0, dev) == 0) { | 
|  |  | 
|  | rt = skb_rtable(skb); | 
|  | addr_type = rt->rt_type; | 
|  |  | 
|  | if (addr_type == RTN_LOCAL) { | 
|  | int dont_send; | 
|  |  | 
|  | dont_send = arp_ignore(in_dev, sip, tip); | 
|  | if (!dont_send && IN_DEV_ARPFILTER(in_dev)) | 
|  | dont_send = arp_filter(sip, tip, dev); | 
|  | if (!dont_send) { | 
|  | n = neigh_event_ns(&arp_tbl, sha, &sip, dev); | 
|  | if (n) { | 
|  | arp_send_dst(ARPOP_REPLY, ETH_P_ARP, | 
|  | sip, dev, tip, sha, | 
|  | dev->dev_addr, sha, | 
|  | reply_dst); | 
|  | neigh_release(n); | 
|  | } | 
|  | } | 
|  | goto out_consume_skb; | 
|  | } else if (IN_DEV_FORWARD(in_dev)) { | 
|  | if (addr_type == RTN_UNICAST  && | 
|  | (arp_fwd_proxy(in_dev, dev, rt) || | 
|  | arp_fwd_pvlan(in_dev, dev, rt, sip, tip) || | 
|  | (rt->dst.dev != dev && | 
|  | pneigh_lookup(&arp_tbl, net, &tip, dev, 0)))) { | 
|  | n = neigh_event_ns(&arp_tbl, sha, &sip, dev); | 
|  | if (n) | 
|  | neigh_release(n); | 
|  |  | 
|  | if (NEIGH_CB(skb)->flags & LOCALLY_ENQUEUED || | 
|  | skb->pkt_type == PACKET_HOST || | 
|  | NEIGH_VAR(in_dev->arp_parms, PROXY_DELAY) == 0) { | 
|  | arp_send_dst(ARPOP_REPLY, ETH_P_ARP, | 
|  | sip, dev, tip, sha, | 
|  | dev->dev_addr, sha, | 
|  | reply_dst); | 
|  | } else { | 
|  | pneigh_enqueue(&arp_tbl, | 
|  | in_dev->arp_parms, skb); | 
|  | goto out_free_dst; | 
|  | } | 
|  | goto out_consume_skb; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Update our ARP tables */ | 
|  |  | 
|  | n = __neigh_lookup(&arp_tbl, &sip, dev, 0); | 
|  |  | 
|  | if (IN_DEV_ARP_ACCEPT(in_dev)) { | 
|  | unsigned int addr_type = inet_addr_type_dev_table(net, dev, sip); | 
|  |  | 
|  | /* Unsolicited ARP is not accepted by default. | 
|  | It is possible, that this option should be enabled for some | 
|  | devices (strip is candidate) | 
|  | */ | 
|  | is_garp = arp->ar_op == htons(ARPOP_REQUEST) && tip == sip && | 
|  | addr_type == RTN_UNICAST; | 
|  |  | 
|  | if (!n && | 
|  | ((arp->ar_op == htons(ARPOP_REPLY)  && | 
|  | addr_type == RTN_UNICAST) || is_garp)) | 
|  | n = __neigh_lookup(&arp_tbl, &sip, dev, 1); | 
|  | } | 
|  |  | 
|  | if (n) { | 
|  | int state = NUD_REACHABLE; | 
|  | int override; | 
|  |  | 
|  | /* If several different ARP replies follows back-to-back, | 
|  | use the FIRST one. It is possible, if several proxy | 
|  | agents are active. Taking the first reply prevents | 
|  | arp trashing and chooses the fastest router. | 
|  | */ | 
|  | override = time_after(jiffies, | 
|  | n->updated + | 
|  | NEIGH_VAR(n->parms, LOCKTIME)) || | 
|  | is_garp; | 
|  |  | 
|  | /* Broadcast replies and request packets | 
|  | do not assert neighbour reachability. | 
|  | */ | 
|  | if (arp->ar_op != htons(ARPOP_REPLY) || | 
|  | skb->pkt_type != PACKET_HOST) | 
|  | state = NUD_STALE; | 
|  | neigh_update(n, sha, state, | 
|  | override ? NEIGH_UPDATE_F_OVERRIDE : 0); | 
|  | neigh_release(n); | 
|  | } | 
|  |  | 
|  | out_consume_skb: | 
|  | consume_skb(skb); | 
|  |  | 
|  | out_free_dst: | 
|  | dst_release(reply_dst); | 
|  | return NET_RX_SUCCESS; | 
|  |  | 
|  | out_free_skb: | 
|  | kfree_skb(skb); | 
|  | return NET_RX_DROP; | 
|  | } | 
|  |  | 
|  | static void parp_redo(struct sk_buff *skb) | 
|  | { | 
|  | arp_process(dev_net(skb->dev), NULL, skb); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | *	Receive an arp request from the device layer. | 
|  | */ | 
|  |  | 
|  | static int arp_rcv(struct sk_buff *skb, struct net_device *dev, | 
|  | struct packet_type *pt, struct net_device *orig_dev) | 
|  | { | 
|  | const struct arphdr *arp; | 
|  |  | 
|  | /* do not tweak dropwatch on an ARP we will ignore */ | 
|  | if (dev->flags & IFF_NOARP || | 
|  | skb->pkt_type == PACKET_OTHERHOST || | 
|  | skb->pkt_type == PACKET_LOOPBACK) | 
|  | goto consumeskb; | 
|  |  | 
|  | skb = skb_share_check(skb, GFP_ATOMIC); | 
|  | if (!skb) | 
|  | goto out_of_mem; | 
|  |  | 
|  | /* ARP header, plus 2 device addresses, plus 2 IP addresses.  */ | 
|  | if (!pskb_may_pull(skb, arp_hdr_len(dev))) | 
|  | goto freeskb; | 
|  |  | 
|  | arp = arp_hdr(skb); | 
|  | if (arp->ar_hln != dev->addr_len || arp->ar_pln != 4) | 
|  | goto freeskb; | 
|  |  | 
|  | memset(NEIGH_CB(skb), 0, sizeof(struct neighbour_cb)); | 
|  |  | 
|  | return NF_HOOK(NFPROTO_ARP, NF_ARP_IN, | 
|  | dev_net(dev), NULL, skb, dev, NULL, | 
|  | arp_process); | 
|  |  | 
|  | consumeskb: | 
|  | consume_skb(skb); | 
|  | return NET_RX_SUCCESS; | 
|  | freeskb: | 
|  | kfree_skb(skb); | 
|  | out_of_mem: | 
|  | return NET_RX_DROP; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *	User level interface (ioctl) | 
|  | */ | 
|  |  | 
|  | /* | 
|  | *	Set (create) an ARP cache entry. | 
|  | */ | 
|  |  | 
|  | static int arp_req_set_proxy(struct net *net, struct net_device *dev, int on) | 
|  | { | 
|  | if (!dev) { | 
|  | IPV4_DEVCONF_ALL(net, PROXY_ARP) = on; | 
|  | return 0; | 
|  | } | 
|  | if (__in_dev_get_rtnl(dev)) { | 
|  | IN_DEV_CONF_SET(__in_dev_get_rtnl(dev), PROXY_ARP, on); | 
|  | return 0; | 
|  | } | 
|  | return -ENXIO; | 
|  | } | 
|  |  | 
|  | static int arp_req_set_public(struct net *net, struct arpreq *r, | 
|  | struct net_device *dev) | 
|  | { | 
|  | __be32 ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr; | 
|  | __be32 mask = ((struct sockaddr_in *)&r->arp_netmask)->sin_addr.s_addr; | 
|  |  | 
|  | if (mask && mask != htonl(0xFFFFFFFF)) | 
|  | return -EINVAL; | 
|  | if (!dev && (r->arp_flags & ATF_COM)) { | 
|  | dev = dev_getbyhwaddr_rcu(net, r->arp_ha.sa_family, | 
|  | r->arp_ha.sa_data); | 
|  | if (!dev) | 
|  | return -ENODEV; | 
|  | } | 
|  | if (mask) { | 
|  | if (!pneigh_lookup(&arp_tbl, net, &ip, dev, 1)) | 
|  | return -ENOBUFS; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | return arp_req_set_proxy(net, dev, 1); | 
|  | } | 
|  |  | 
|  | static int arp_req_set(struct net *net, struct arpreq *r, | 
|  | struct net_device *dev) | 
|  | { | 
|  | __be32 ip; | 
|  | struct neighbour *neigh; | 
|  | int err; | 
|  |  | 
|  | if (r->arp_flags & ATF_PUBL) | 
|  | return arp_req_set_public(net, r, dev); | 
|  |  | 
|  | ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr; | 
|  | if (r->arp_flags & ATF_PERM) | 
|  | r->arp_flags |= ATF_COM; | 
|  | if (!dev) { | 
|  | struct rtable *rt = ip_route_output(net, ip, 0, RTO_ONLINK, 0); | 
|  |  | 
|  | if (IS_ERR(rt)) | 
|  | return PTR_ERR(rt); | 
|  | dev = rt->dst.dev; | 
|  | ip_rt_put(rt); | 
|  | if (!dev) | 
|  | return -EINVAL; | 
|  | } | 
|  | switch (dev->type) { | 
|  | #if IS_ENABLED(CONFIG_FDDI) | 
|  | case ARPHRD_FDDI: | 
|  | /* | 
|  | * According to RFC 1390, FDDI devices should accept ARP | 
|  | * hardware types of 1 (Ethernet).  However, to be more | 
|  | * robust, we'll accept hardware types of either 1 (Ethernet) | 
|  | * or 6 (IEEE 802.2). | 
|  | */ | 
|  | if (r->arp_ha.sa_family != ARPHRD_FDDI && | 
|  | r->arp_ha.sa_family != ARPHRD_ETHER && | 
|  | r->arp_ha.sa_family != ARPHRD_IEEE802) | 
|  | return -EINVAL; | 
|  | break; | 
|  | #endif | 
|  | default: | 
|  | if (r->arp_ha.sa_family != dev->type) | 
|  | return -EINVAL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | neigh = __neigh_lookup_errno(&arp_tbl, &ip, dev); | 
|  | err = PTR_ERR(neigh); | 
|  | if (!IS_ERR(neigh)) { | 
|  | unsigned int state = NUD_STALE; | 
|  | if (r->arp_flags & ATF_PERM) | 
|  | state = NUD_PERMANENT; | 
|  | err = neigh_update(neigh, (r->arp_flags & ATF_COM) ? | 
|  | r->arp_ha.sa_data : NULL, state, | 
|  | NEIGH_UPDATE_F_OVERRIDE | | 
|  | NEIGH_UPDATE_F_ADMIN); | 
|  | neigh_release(neigh); | 
|  | } | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static unsigned int arp_state_to_flags(struct neighbour *neigh) | 
|  | { | 
|  | if (neigh->nud_state&NUD_PERMANENT) | 
|  | return ATF_PERM | ATF_COM; | 
|  | else if (neigh->nud_state&NUD_VALID) | 
|  | return ATF_COM; | 
|  | else | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *	Get an ARP cache entry. | 
|  | */ | 
|  |  | 
|  | static int arp_req_get(struct arpreq *r, struct net_device *dev) | 
|  | { | 
|  | __be32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr; | 
|  | struct neighbour *neigh; | 
|  | int err = -ENXIO; | 
|  |  | 
|  | neigh = neigh_lookup(&arp_tbl, &ip, dev); | 
|  | if (neigh) { | 
|  | if (!(neigh->nud_state & NUD_NOARP)) { | 
|  | read_lock_bh(&neigh->lock); | 
|  | memcpy(r->arp_ha.sa_data, neigh->ha, dev->addr_len); | 
|  | r->arp_flags = arp_state_to_flags(neigh); | 
|  | read_unlock_bh(&neigh->lock); | 
|  | r->arp_ha.sa_family = dev->type; | 
|  | strlcpy(r->arp_dev, dev->name, sizeof(r->arp_dev)); | 
|  | err = 0; | 
|  | } | 
|  | neigh_release(neigh); | 
|  | } | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int arp_invalidate(struct net_device *dev, __be32 ip) | 
|  | { | 
|  | struct neighbour *neigh = neigh_lookup(&arp_tbl, &ip, dev); | 
|  | int err = -ENXIO; | 
|  |  | 
|  | if (neigh) { | 
|  | if (neigh->nud_state & ~NUD_NOARP) | 
|  | err = neigh_update(neigh, NULL, NUD_FAILED, | 
|  | NEIGH_UPDATE_F_OVERRIDE| | 
|  | NEIGH_UPDATE_F_ADMIN); | 
|  | neigh_release(neigh); | 
|  | } | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int arp_req_delete_public(struct net *net, struct arpreq *r, | 
|  | struct net_device *dev) | 
|  | { | 
|  | __be32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr; | 
|  | __be32 mask = ((struct sockaddr_in *)&r->arp_netmask)->sin_addr.s_addr; | 
|  |  | 
|  | if (mask == htonl(0xFFFFFFFF)) | 
|  | return pneigh_delete(&arp_tbl, net, &ip, dev); | 
|  |  | 
|  | if (mask) | 
|  | return -EINVAL; | 
|  |  | 
|  | return arp_req_set_proxy(net, dev, 0); | 
|  | } | 
|  |  | 
|  | static int arp_req_delete(struct net *net, struct arpreq *r, | 
|  | struct net_device *dev) | 
|  | { | 
|  | __be32 ip; | 
|  |  | 
|  | if (r->arp_flags & ATF_PUBL) | 
|  | return arp_req_delete_public(net, r, dev); | 
|  |  | 
|  | ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr; | 
|  | if (!dev) { | 
|  | struct rtable *rt = ip_route_output(net, ip, 0, RTO_ONLINK, 0); | 
|  | if (IS_ERR(rt)) | 
|  | return PTR_ERR(rt); | 
|  | dev = rt->dst.dev; | 
|  | ip_rt_put(rt); | 
|  | if (!dev) | 
|  | return -EINVAL; | 
|  | } | 
|  | return arp_invalidate(dev, ip); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *	Handle an ARP layer I/O control request. | 
|  | */ | 
|  |  | 
|  | int arp_ioctl(struct net *net, unsigned int cmd, void __user *arg) | 
|  | { | 
|  | int err; | 
|  | struct arpreq r; | 
|  | struct net_device *dev = NULL; | 
|  |  | 
|  | switch (cmd) { | 
|  | case SIOCDARP: | 
|  | case SIOCSARP: | 
|  | if (!ns_capable(net->user_ns, CAP_NET_ADMIN)) | 
|  | return -EPERM; | 
|  | case SIOCGARP: | 
|  | err = copy_from_user(&r, arg, sizeof(struct arpreq)); | 
|  | if (err) | 
|  | return -EFAULT; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (r.arp_pa.sa_family != AF_INET) | 
|  | return -EPFNOSUPPORT; | 
|  |  | 
|  | if (!(r.arp_flags & ATF_PUBL) && | 
|  | (r.arp_flags & (ATF_NETMASK | ATF_DONTPUB))) | 
|  | return -EINVAL; | 
|  | if (!(r.arp_flags & ATF_NETMASK)) | 
|  | ((struct sockaddr_in *)&r.arp_netmask)->sin_addr.s_addr = | 
|  | htonl(0xFFFFFFFFUL); | 
|  | rtnl_lock(); | 
|  | if (r.arp_dev[0]) { | 
|  | err = -ENODEV; | 
|  | dev = __dev_get_by_name(net, r.arp_dev); | 
|  | if (!dev) | 
|  | goto out; | 
|  |  | 
|  | /* Mmmm... It is wrong... ARPHRD_NETROM==0 */ | 
|  | if (!r.arp_ha.sa_family) | 
|  | r.arp_ha.sa_family = dev->type; | 
|  | err = -EINVAL; | 
|  | if ((r.arp_flags & ATF_COM) && r.arp_ha.sa_family != dev->type) | 
|  | goto out; | 
|  | } else if (cmd == SIOCGARP) { | 
|  | err = -ENODEV; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | switch (cmd) { | 
|  | case SIOCDARP: | 
|  | err = arp_req_delete(net, &r, dev); | 
|  | break; | 
|  | case SIOCSARP: | 
|  | err = arp_req_set(net, &r, dev); | 
|  | break; | 
|  | case SIOCGARP: | 
|  | err = arp_req_get(&r, dev); | 
|  | break; | 
|  | } | 
|  | out: | 
|  | rtnl_unlock(); | 
|  | if (cmd == SIOCGARP && !err && copy_to_user(arg, &r, sizeof(r))) | 
|  | err = -EFAULT; | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int arp_netdev_event(struct notifier_block *this, unsigned long event, | 
|  | void *ptr) | 
|  | { | 
|  | struct net_device *dev = netdev_notifier_info_to_dev(ptr); | 
|  | struct netdev_notifier_change_info *change_info; | 
|  |  | 
|  | switch (event) { | 
|  | case NETDEV_CHANGEADDR: | 
|  | neigh_changeaddr(&arp_tbl, dev); | 
|  | rt_cache_flush(dev_net(dev)); | 
|  | break; | 
|  | case NETDEV_CHANGE: | 
|  | change_info = ptr; | 
|  | if (change_info->flags_changed & IFF_NOARP) | 
|  | neigh_changeaddr(&arp_tbl, dev); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | static struct notifier_block arp_netdev_notifier = { | 
|  | .notifier_call = arp_netdev_event, | 
|  | }; | 
|  |  | 
|  | /* Note, that it is not on notifier chain. | 
|  | It is necessary, that this routine was called after route cache will be | 
|  | flushed. | 
|  | */ | 
|  | void arp_ifdown(struct net_device *dev) | 
|  | { | 
|  | neigh_ifdown(&arp_tbl, dev); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | *	Called once on startup. | 
|  | */ | 
|  |  | 
|  | static struct packet_type arp_packet_type __read_mostly = { | 
|  | .type =	cpu_to_be16(ETH_P_ARP), | 
|  | .func =	arp_rcv, | 
|  | }; | 
|  |  | 
|  | static int arp_proc_init(void); | 
|  |  | 
|  | void __init arp_init(void) | 
|  | { | 
|  | neigh_table_init(NEIGH_ARP_TABLE, &arp_tbl); | 
|  |  | 
|  | dev_add_pack(&arp_packet_type); | 
|  | arp_proc_init(); | 
|  | #ifdef CONFIG_SYSCTL | 
|  | neigh_sysctl_register(NULL, &arp_tbl.parms, NULL); | 
|  | #endif | 
|  | register_netdevice_notifier(&arp_netdev_notifier); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PROC_FS | 
|  | #if IS_ENABLED(CONFIG_AX25) | 
|  |  | 
|  | /* ------------------------------------------------------------------------ */ | 
|  | /* | 
|  | *	ax25 -> ASCII conversion | 
|  | */ | 
|  | static char *ax2asc2(ax25_address *a, char *buf) | 
|  | { | 
|  | char c, *s; | 
|  | int n; | 
|  |  | 
|  | for (n = 0, s = buf; n < 6; n++) { | 
|  | c = (a->ax25_call[n] >> 1) & 0x7F; | 
|  |  | 
|  | if (c != ' ') | 
|  | *s++ = c; | 
|  | } | 
|  |  | 
|  | *s++ = '-'; | 
|  | n = (a->ax25_call[6] >> 1) & 0x0F; | 
|  | if (n > 9) { | 
|  | *s++ = '1'; | 
|  | n -= 10; | 
|  | } | 
|  |  | 
|  | *s++ = n + '0'; | 
|  | *s++ = '\0'; | 
|  |  | 
|  | if (*buf == '\0' || *buf == '-') | 
|  | return "*"; | 
|  |  | 
|  | return buf; | 
|  | } | 
|  | #endif /* CONFIG_AX25 */ | 
|  |  | 
|  | #define HBUFFERLEN 30 | 
|  |  | 
|  | static void arp_format_neigh_entry(struct seq_file *seq, | 
|  | struct neighbour *n) | 
|  | { | 
|  | char hbuffer[HBUFFERLEN]; | 
|  | int k, j; | 
|  | char tbuf[16]; | 
|  | struct net_device *dev = n->dev; | 
|  | int hatype = dev->type; | 
|  |  | 
|  | read_lock(&n->lock); | 
|  | /* Convert hardware address to XX:XX:XX:XX ... form. */ | 
|  | #if IS_ENABLED(CONFIG_AX25) | 
|  | if (hatype == ARPHRD_AX25 || hatype == ARPHRD_NETROM) | 
|  | ax2asc2((ax25_address *)n->ha, hbuffer); | 
|  | else { | 
|  | #endif | 
|  | for (k = 0, j = 0; k < HBUFFERLEN - 3 && j < dev->addr_len; j++) { | 
|  | hbuffer[k++] = hex_asc_hi(n->ha[j]); | 
|  | hbuffer[k++] = hex_asc_lo(n->ha[j]); | 
|  | hbuffer[k++] = ':'; | 
|  | } | 
|  | if (k != 0) | 
|  | --k; | 
|  | hbuffer[k] = 0; | 
|  | #if IS_ENABLED(CONFIG_AX25) | 
|  | } | 
|  | #endif | 
|  | sprintf(tbuf, "%pI4", n->primary_key); | 
|  | seq_printf(seq, "%-16s 0x%-10x0x%-10x%s     *        %s\n", | 
|  | tbuf, hatype, arp_state_to_flags(n), hbuffer, dev->name); | 
|  | read_unlock(&n->lock); | 
|  | } | 
|  |  | 
|  | static void arp_format_pneigh_entry(struct seq_file *seq, | 
|  | struct pneigh_entry *n) | 
|  | { | 
|  | struct net_device *dev = n->dev; | 
|  | int hatype = dev ? dev->type : 0; | 
|  | char tbuf[16]; | 
|  |  | 
|  | sprintf(tbuf, "%pI4", n->key); | 
|  | seq_printf(seq, "%-16s 0x%-10x0x%-10x%s     *        %s\n", | 
|  | tbuf, hatype, ATF_PUBL | ATF_PERM, "00:00:00:00:00:00", | 
|  | dev ? dev->name : "*"); | 
|  | } | 
|  |  | 
|  | static int arp_seq_show(struct seq_file *seq, void *v) | 
|  | { | 
|  | if (v == SEQ_START_TOKEN) { | 
|  | seq_puts(seq, "IP address       HW type     Flags       " | 
|  | "HW address            Mask     Device\n"); | 
|  | } else { | 
|  | struct neigh_seq_state *state = seq->private; | 
|  |  | 
|  | if (state->flags & NEIGH_SEQ_IS_PNEIGH) | 
|  | arp_format_pneigh_entry(seq, v); | 
|  | else | 
|  | arp_format_neigh_entry(seq, v); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void *arp_seq_start(struct seq_file *seq, loff_t *pos) | 
|  | { | 
|  | /* Don't want to confuse "arp -a" w/ magic entries, | 
|  | * so we tell the generic iterator to skip NUD_NOARP. | 
|  | */ | 
|  | return neigh_seq_start(seq, pos, &arp_tbl, NEIGH_SEQ_SKIP_NOARP); | 
|  | } | 
|  |  | 
|  | /* ------------------------------------------------------------------------ */ | 
|  |  | 
|  | static const struct seq_operations arp_seq_ops = { | 
|  | .start	= arp_seq_start, | 
|  | .next	= neigh_seq_next, | 
|  | .stop	= neigh_seq_stop, | 
|  | .show	= arp_seq_show, | 
|  | }; | 
|  |  | 
|  | static int arp_seq_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | return seq_open_net(inode, file, &arp_seq_ops, | 
|  | sizeof(struct neigh_seq_state)); | 
|  | } | 
|  |  | 
|  | static const struct file_operations arp_seq_fops = { | 
|  | .owner		= THIS_MODULE, | 
|  | .open           = arp_seq_open, | 
|  | .read           = seq_read, | 
|  | .llseek         = seq_lseek, | 
|  | .release	= seq_release_net, | 
|  | }; | 
|  |  | 
|  |  | 
|  | static int __net_init arp_net_init(struct net *net) | 
|  | { | 
|  | if (!proc_create("arp", S_IRUGO, net->proc_net, &arp_seq_fops)) | 
|  | return -ENOMEM; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __net_exit arp_net_exit(struct net *net) | 
|  | { | 
|  | remove_proc_entry("arp", net->proc_net); | 
|  | } | 
|  |  | 
|  | static struct pernet_operations arp_net_ops = { | 
|  | .init = arp_net_init, | 
|  | .exit = arp_net_exit, | 
|  | }; | 
|  |  | 
|  | static int __init arp_proc_init(void) | 
|  | { | 
|  | return register_pernet_subsys(&arp_net_ops); | 
|  | } | 
|  |  | 
|  | #else /* CONFIG_PROC_FS */ | 
|  |  | 
|  | static int __init arp_proc_init(void) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #endif /* CONFIG_PROC_FS */ |