|  | /* | 
|  | * | 
|  | * mwavedd.c -- mwave device driver | 
|  | * | 
|  | * | 
|  | * Written By: Mike Sullivan IBM Corporation | 
|  | * | 
|  | * Copyright (C) 1999 IBM Corporation | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * NO WARRANTY | 
|  | * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR | 
|  | * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT | 
|  | * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, | 
|  | * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is | 
|  | * solely responsible for determining the appropriateness of using and | 
|  | * distributing the Program and assumes all risks associated with its | 
|  | * exercise of rights under this Agreement, including but not limited to | 
|  | * the risks and costs of program errors, damage to or loss of data, | 
|  | * programs or equipment, and unavailability or interruption of operations. | 
|  | * | 
|  | * DISCLAIMER OF LIABILITY | 
|  | * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY | 
|  | * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | 
|  | * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND | 
|  | * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR | 
|  | * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE | 
|  | * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED | 
|  | * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA | 
|  | * | 
|  | * | 
|  | * 10/23/2000 - Alpha Release | 
|  | *	First release to the public | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/major.h> | 
|  | #include <linux/miscdevice.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/serial.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/serial_8250.h> | 
|  | #include <linux/nospec.h> | 
|  | #include "smapi.h" | 
|  | #include "mwavedd.h" | 
|  | #include "3780i.h" | 
|  | #include "tp3780i.h" | 
|  |  | 
|  | MODULE_DESCRIPTION("3780i Advanced Communications Processor (Mwave) driver"); | 
|  | MODULE_AUTHOR("Mike Sullivan and Paul Schroeder"); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | /* | 
|  | * These parameters support the setting of MWave resources. Note that no | 
|  | * checks are made against other devices (ie. superio) for conflicts. | 
|  | * We'll depend on users using the tpctl utility to do that for now | 
|  | */ | 
|  | static DEFINE_MUTEX(mwave_mutex); | 
|  | int mwave_debug = 0; | 
|  | int mwave_3780i_irq = 0; | 
|  | int mwave_3780i_io = 0; | 
|  | int mwave_uart_irq = 0; | 
|  | int mwave_uart_io = 0; | 
|  | module_param(mwave_debug, int, 0); | 
|  | module_param_hw(mwave_3780i_irq, int, irq, 0); | 
|  | module_param_hw(mwave_3780i_io, int, ioport, 0); | 
|  | module_param_hw(mwave_uart_irq, int, irq, 0); | 
|  | module_param_hw(mwave_uart_io, int, ioport, 0); | 
|  |  | 
|  | static int mwave_open(struct inode *inode, struct file *file); | 
|  | static int mwave_close(struct inode *inode, struct file *file); | 
|  | static long mwave_ioctl(struct file *filp, unsigned int iocmd, | 
|  | unsigned long ioarg); | 
|  |  | 
|  | MWAVE_DEVICE_DATA mwave_s_mdd; | 
|  |  | 
|  | static int mwave_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | unsigned int retval = 0; | 
|  |  | 
|  | PRINTK_3(TRACE_MWAVE, | 
|  | "mwavedd::mwave_open, entry inode %p file %p\n", | 
|  | inode, file); | 
|  | PRINTK_2(TRACE_MWAVE, | 
|  | "mwavedd::mwave_open, exit return retval %x\n", retval); | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static int mwave_close(struct inode *inode, struct file *file) | 
|  | { | 
|  | unsigned int retval = 0; | 
|  |  | 
|  | PRINTK_3(TRACE_MWAVE, | 
|  | "mwavedd::mwave_close, entry inode %p file %p\n", | 
|  | inode,  file); | 
|  |  | 
|  | PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_close, exit retval %x\n", | 
|  | retval); | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static long mwave_ioctl(struct file *file, unsigned int iocmd, | 
|  | unsigned long ioarg) | 
|  | { | 
|  | unsigned int retval = 0; | 
|  | pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd; | 
|  | void __user *arg = (void __user *)ioarg; | 
|  |  | 
|  | PRINTK_4(TRACE_MWAVE, | 
|  | "mwavedd::mwave_ioctl, entry file %p cmd %x arg %x\n", | 
|  | file, iocmd, (int) ioarg); | 
|  |  | 
|  | switch (iocmd) { | 
|  |  | 
|  | case IOCTL_MW_RESET: | 
|  | PRINTK_1(TRACE_MWAVE, | 
|  | "mwavedd::mwave_ioctl, IOCTL_MW_RESET" | 
|  | " calling tp3780I_ResetDSP\n"); | 
|  | mutex_lock(&mwave_mutex); | 
|  | retval = tp3780I_ResetDSP(&pDrvData->rBDData); | 
|  | mutex_unlock(&mwave_mutex); | 
|  | PRINTK_2(TRACE_MWAVE, | 
|  | "mwavedd::mwave_ioctl, IOCTL_MW_RESET" | 
|  | " retval %x from tp3780I_ResetDSP\n", | 
|  | retval); | 
|  | break; | 
|  |  | 
|  | case IOCTL_MW_RUN: | 
|  | PRINTK_1(TRACE_MWAVE, | 
|  | "mwavedd::mwave_ioctl, IOCTL_MW_RUN" | 
|  | " calling tp3780I_StartDSP\n"); | 
|  | mutex_lock(&mwave_mutex); | 
|  | retval = tp3780I_StartDSP(&pDrvData->rBDData); | 
|  | mutex_unlock(&mwave_mutex); | 
|  | PRINTK_2(TRACE_MWAVE, | 
|  | "mwavedd::mwave_ioctl, IOCTL_MW_RUN" | 
|  | " retval %x from tp3780I_StartDSP\n", | 
|  | retval); | 
|  | break; | 
|  |  | 
|  | case IOCTL_MW_DSP_ABILITIES: { | 
|  | MW_ABILITIES rAbilities; | 
|  |  | 
|  | PRINTK_1(TRACE_MWAVE, | 
|  | "mwavedd::mwave_ioctl," | 
|  | " IOCTL_MW_DSP_ABILITIES calling" | 
|  | " tp3780I_QueryAbilities\n"); | 
|  | mutex_lock(&mwave_mutex); | 
|  | retval = tp3780I_QueryAbilities(&pDrvData->rBDData, | 
|  | &rAbilities); | 
|  | mutex_unlock(&mwave_mutex); | 
|  | PRINTK_2(TRACE_MWAVE, | 
|  | "mwavedd::mwave_ioctl, IOCTL_MW_DSP_ABILITIES" | 
|  | " retval %x from tp3780I_QueryAbilities\n", | 
|  | retval); | 
|  | if (retval == 0) { | 
|  | if( copy_to_user(arg, &rAbilities, | 
|  | sizeof(MW_ABILITIES)) ) | 
|  | return -EFAULT; | 
|  | } | 
|  | PRINTK_2(TRACE_MWAVE, | 
|  | "mwavedd::mwave_ioctl, IOCTL_MW_DSP_ABILITIES" | 
|  | " exit retval %x\n", | 
|  | retval); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case IOCTL_MW_READ_DATA: | 
|  | case IOCTL_MW_READCLEAR_DATA: { | 
|  | MW_READWRITE rReadData; | 
|  | unsigned short __user *pusBuffer = NULL; | 
|  |  | 
|  | if( copy_from_user(&rReadData, arg, | 
|  | sizeof(MW_READWRITE)) ) | 
|  | return -EFAULT; | 
|  | pusBuffer = (unsigned short __user *) (rReadData.pBuf); | 
|  |  | 
|  | PRINTK_4(TRACE_MWAVE, | 
|  | "mwavedd::mwave_ioctl IOCTL_MW_READ_DATA," | 
|  | " size %lx, ioarg %lx pusBuffer %p\n", | 
|  | rReadData.ulDataLength, ioarg, pusBuffer); | 
|  | mutex_lock(&mwave_mutex); | 
|  | retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData, | 
|  | iocmd, | 
|  | pusBuffer, | 
|  | rReadData.ulDataLength, | 
|  | rReadData.usDspAddress); | 
|  | mutex_unlock(&mwave_mutex); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case IOCTL_MW_READ_INST: { | 
|  | MW_READWRITE rReadData; | 
|  | unsigned short __user *pusBuffer = NULL; | 
|  |  | 
|  | if( copy_from_user(&rReadData, arg, | 
|  | sizeof(MW_READWRITE)) ) | 
|  | return -EFAULT; | 
|  | pusBuffer = (unsigned short __user *) (rReadData.pBuf); | 
|  |  | 
|  | PRINTK_4(TRACE_MWAVE, | 
|  | "mwavedd::mwave_ioctl IOCTL_MW_READ_INST," | 
|  | " size %lx, ioarg %lx pusBuffer %p\n", | 
|  | rReadData.ulDataLength / 2, ioarg, | 
|  | pusBuffer); | 
|  | mutex_lock(&mwave_mutex); | 
|  | retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData, | 
|  | iocmd, pusBuffer, | 
|  | rReadData.ulDataLength / 2, | 
|  | rReadData.usDspAddress); | 
|  | mutex_unlock(&mwave_mutex); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case IOCTL_MW_WRITE_DATA: { | 
|  | MW_READWRITE rWriteData; | 
|  | unsigned short __user *pusBuffer = NULL; | 
|  |  | 
|  | if( copy_from_user(&rWriteData, arg, | 
|  | sizeof(MW_READWRITE)) ) | 
|  | return -EFAULT; | 
|  | pusBuffer = (unsigned short __user *) (rWriteData.pBuf); | 
|  |  | 
|  | PRINTK_4(TRACE_MWAVE, | 
|  | "mwavedd::mwave_ioctl IOCTL_MW_WRITE_DATA," | 
|  | " size %lx, ioarg %lx pusBuffer %p\n", | 
|  | rWriteData.ulDataLength, ioarg, | 
|  | pusBuffer); | 
|  | mutex_lock(&mwave_mutex); | 
|  | retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData, | 
|  | iocmd, pusBuffer, | 
|  | rWriteData.ulDataLength, | 
|  | rWriteData.usDspAddress); | 
|  | mutex_unlock(&mwave_mutex); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case IOCTL_MW_WRITE_INST: { | 
|  | MW_READWRITE rWriteData; | 
|  | unsigned short __user *pusBuffer = NULL; | 
|  |  | 
|  | if( copy_from_user(&rWriteData, arg, | 
|  | sizeof(MW_READWRITE)) ) | 
|  | return -EFAULT; | 
|  | pusBuffer = (unsigned short __user *)(rWriteData.pBuf); | 
|  |  | 
|  | PRINTK_4(TRACE_MWAVE, | 
|  | "mwavedd::mwave_ioctl IOCTL_MW_WRITE_INST," | 
|  | " size %lx, ioarg %lx pusBuffer %p\n", | 
|  | rWriteData.ulDataLength, ioarg, | 
|  | pusBuffer); | 
|  | mutex_lock(&mwave_mutex); | 
|  | retval = tp3780I_ReadWriteDspIStore(&pDrvData->rBDData, | 
|  | iocmd, pusBuffer, | 
|  | rWriteData.ulDataLength, | 
|  | rWriteData.usDspAddress); | 
|  | mutex_unlock(&mwave_mutex); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case IOCTL_MW_REGISTER_IPC: { | 
|  | unsigned int ipcnum = (unsigned int) ioarg; | 
|  |  | 
|  | if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) { | 
|  | PRINTK_ERROR(KERN_ERR_MWAVE | 
|  | "mwavedd::mwave_ioctl:" | 
|  | " IOCTL_MW_REGISTER_IPC:" | 
|  | " Error: Invalid ipcnum %x\n", | 
|  | ipcnum); | 
|  | return -EINVAL; | 
|  | } | 
|  | ipcnum = array_index_nospec(ipcnum, | 
|  | ARRAY_SIZE(pDrvData->IPCs)); | 
|  | PRINTK_3(TRACE_MWAVE, | 
|  | "mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC" | 
|  | " ipcnum %x entry usIntCount %x\n", | 
|  | ipcnum, | 
|  | pDrvData->IPCs[ipcnum].usIntCount); | 
|  |  | 
|  | mutex_lock(&mwave_mutex); | 
|  | pDrvData->IPCs[ipcnum].bIsHere = false; | 
|  | pDrvData->IPCs[ipcnum].bIsEnabled = true; | 
|  | mutex_unlock(&mwave_mutex); | 
|  |  | 
|  | PRINTK_2(TRACE_MWAVE, | 
|  | "mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC" | 
|  | " ipcnum %x exit\n", | 
|  | ipcnum); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case IOCTL_MW_GET_IPC: { | 
|  | unsigned int ipcnum = (unsigned int) ioarg; | 
|  |  | 
|  | if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) { | 
|  | PRINTK_ERROR(KERN_ERR_MWAVE | 
|  | "mwavedd::mwave_ioctl:" | 
|  | " IOCTL_MW_GET_IPC: Error:" | 
|  | " Invalid ipcnum %x\n", ipcnum); | 
|  | return -EINVAL; | 
|  | } | 
|  | ipcnum = array_index_nospec(ipcnum, | 
|  | ARRAY_SIZE(pDrvData->IPCs)); | 
|  | PRINTK_3(TRACE_MWAVE, | 
|  | "mwavedd::mwave_ioctl IOCTL_MW_GET_IPC" | 
|  | " ipcnum %x, usIntCount %x\n", | 
|  | ipcnum, | 
|  | pDrvData->IPCs[ipcnum].usIntCount); | 
|  |  | 
|  | mutex_lock(&mwave_mutex); | 
|  | if (pDrvData->IPCs[ipcnum].bIsEnabled == true) { | 
|  | DECLARE_WAITQUEUE(wait, current); | 
|  |  | 
|  | PRINTK_2(TRACE_MWAVE, | 
|  | "mwavedd::mwave_ioctl, thread for" | 
|  | " ipc %x going to sleep\n", | 
|  | ipcnum); | 
|  | add_wait_queue(&pDrvData->IPCs[ipcnum].ipc_wait_queue, &wait); | 
|  | pDrvData->IPCs[ipcnum].bIsHere = true; | 
|  | set_current_state(TASK_INTERRUPTIBLE); | 
|  | /* check whether an event was signalled by */ | 
|  | /* the interrupt handler while we were gone */ | 
|  | if (pDrvData->IPCs[ipcnum].usIntCount == 1) {	/* first int has occurred (race condition) */ | 
|  | pDrvData->IPCs[ipcnum].usIntCount = 2;	/* first int has been handled */ | 
|  | PRINTK_2(TRACE_MWAVE, | 
|  | "mwavedd::mwave_ioctl" | 
|  | " IOCTL_MW_GET_IPC ipcnum %x" | 
|  | " handling first int\n", | 
|  | ipcnum); | 
|  | } else {	/* either 1st int has not yet occurred, or we have already handled the first int */ | 
|  | schedule(); | 
|  | if (pDrvData->IPCs[ipcnum].usIntCount == 1) { | 
|  | pDrvData->IPCs[ipcnum].usIntCount = 2; | 
|  | } | 
|  | PRINTK_2(TRACE_MWAVE, | 
|  | "mwavedd::mwave_ioctl" | 
|  | " IOCTL_MW_GET_IPC ipcnum %x" | 
|  | " woke up and returning to" | 
|  | " application\n", | 
|  | ipcnum); | 
|  | } | 
|  | pDrvData->IPCs[ipcnum].bIsHere = false; | 
|  | remove_wait_queue(&pDrvData->IPCs[ipcnum].ipc_wait_queue, &wait); | 
|  | set_current_state(TASK_RUNNING); | 
|  | PRINTK_2(TRACE_MWAVE, | 
|  | "mwavedd::mwave_ioctl IOCTL_MW_GET_IPC," | 
|  | " returning thread for ipc %x" | 
|  | " processing\n", | 
|  | ipcnum); | 
|  | } | 
|  | mutex_unlock(&mwave_mutex); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case IOCTL_MW_UNREGISTER_IPC: { | 
|  | unsigned int ipcnum = (unsigned int) ioarg; | 
|  |  | 
|  | PRINTK_2(TRACE_MWAVE, | 
|  | "mwavedd::mwave_ioctl IOCTL_MW_UNREGISTER_IPC" | 
|  | " ipcnum %x\n", | 
|  | ipcnum); | 
|  | if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) { | 
|  | PRINTK_ERROR(KERN_ERR_MWAVE | 
|  | "mwavedd::mwave_ioctl:" | 
|  | " IOCTL_MW_UNREGISTER_IPC:" | 
|  | " Error: Invalid ipcnum %x\n", | 
|  | ipcnum); | 
|  | return -EINVAL; | 
|  | } | 
|  | ipcnum = array_index_nospec(ipcnum, | 
|  | ARRAY_SIZE(pDrvData->IPCs)); | 
|  | mutex_lock(&mwave_mutex); | 
|  | if (pDrvData->IPCs[ipcnum].bIsEnabled == true) { | 
|  | pDrvData->IPCs[ipcnum].bIsEnabled = false; | 
|  | if (pDrvData->IPCs[ipcnum].bIsHere == true) { | 
|  | wake_up_interruptible(&pDrvData->IPCs[ipcnum].ipc_wait_queue); | 
|  | } | 
|  | } | 
|  | mutex_unlock(&mwave_mutex); | 
|  | } | 
|  | break; | 
|  |  | 
|  | default: | 
|  | return -ENOTTY; | 
|  | } /* switch */ | 
|  |  | 
|  | PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_ioctl, exit retval %x\n", retval); | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  |  | 
|  | static ssize_t mwave_read(struct file *file, char __user *buf, size_t count, | 
|  | loff_t * ppos) | 
|  | { | 
|  | PRINTK_5(TRACE_MWAVE, | 
|  | "mwavedd::mwave_read entry file %p, buf %p, count %zx ppos %p\n", | 
|  | file, buf, count, ppos); | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  |  | 
|  | static ssize_t mwave_write(struct file *file, const char __user *buf, | 
|  | size_t count, loff_t * ppos) | 
|  | { | 
|  | PRINTK_5(TRACE_MWAVE, | 
|  | "mwavedd::mwave_write entry file %p, buf %p," | 
|  | " count %zx ppos %p\n", | 
|  | file, buf, count, ppos); | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int register_serial_portandirq(unsigned int port, int irq) | 
|  | { | 
|  | struct uart_8250_port uart; | 
|  |  | 
|  | switch ( port ) { | 
|  | case 0x3f8: | 
|  | case 0x2f8: | 
|  | case 0x3e8: | 
|  | case 0x2e8: | 
|  | /* OK */ | 
|  | break; | 
|  | default: | 
|  | PRINTK_ERROR(KERN_ERR_MWAVE | 
|  | "mwavedd::register_serial_portandirq:" | 
|  | " Error: Illegal port %x\n", port ); | 
|  | return -1; | 
|  | } /* switch */ | 
|  | /* port is okay */ | 
|  |  | 
|  | switch ( irq ) { | 
|  | case 3: | 
|  | case 4: | 
|  | case 5: | 
|  | case 7: | 
|  | /* OK */ | 
|  | break; | 
|  | default: | 
|  | PRINTK_ERROR(KERN_ERR_MWAVE | 
|  | "mwavedd::register_serial_portandirq:" | 
|  | " Error: Illegal irq %x\n", irq ); | 
|  | return -1; | 
|  | } /* switch */ | 
|  | /* irq is okay */ | 
|  |  | 
|  | memset(&uart, 0, sizeof(uart)); | 
|  |  | 
|  | uart.port.uartclk =  1843200; | 
|  | uart.port.iobase = port; | 
|  | uart.port.irq = irq; | 
|  | uart.port.iotype = UPIO_PORT; | 
|  | uart.port.flags =  UPF_SHARE_IRQ; | 
|  | return serial8250_register_8250_port(&uart); | 
|  | } | 
|  |  | 
|  |  | 
|  | static const struct file_operations mwave_fops = { | 
|  | .owner		= THIS_MODULE, | 
|  | .read		= mwave_read, | 
|  | .write		= mwave_write, | 
|  | .unlocked_ioctl	= mwave_ioctl, | 
|  | .open		= mwave_open, | 
|  | .release	= mwave_close, | 
|  | .llseek		= default_llseek, | 
|  | }; | 
|  |  | 
|  |  | 
|  | static struct miscdevice mwave_misc_dev = { MWAVE_MINOR, "mwave", &mwave_fops }; | 
|  |  | 
|  | #if 0 /* totally b0rked */ | 
|  | /* | 
|  | * sysfs support <paulsch@us.ibm.com> | 
|  | */ | 
|  |  | 
|  | struct device mwave_device; | 
|  |  | 
|  | /* Prevent code redundancy, create a macro for mwave_show_* functions. */ | 
|  | #define mwave_show_function(attr_name, format_string, field)		\ | 
|  | static ssize_t mwave_show_##attr_name(struct device *dev, struct device_attribute *attr, char *buf)	\ | 
|  | {									\ | 
|  | DSP_3780I_CONFIG_SETTINGS *pSettings =				\ | 
|  | &mwave_s_mdd.rBDData.rDspSettings;			\ | 
|  | return sprintf(buf, format_string, pSettings->field);		\ | 
|  | } | 
|  |  | 
|  | /* All of our attributes are read attributes. */ | 
|  | #define mwave_dev_rd_attr(attr_name, format_string, field)		\ | 
|  | mwave_show_function(attr_name, format_string, field)		\ | 
|  | static DEVICE_ATTR(attr_name, S_IRUGO, mwave_show_##attr_name, NULL) | 
|  |  | 
|  | mwave_dev_rd_attr (3780i_dma, "%i\n", usDspDma); | 
|  | mwave_dev_rd_attr (3780i_irq, "%i\n", usDspIrq); | 
|  | mwave_dev_rd_attr (3780i_io, "%#.4x\n", usDspBaseIO); | 
|  | mwave_dev_rd_attr (uart_irq, "%i\n", usUartIrq); | 
|  | mwave_dev_rd_attr (uart_io, "%#.4x\n", usUartBaseIO); | 
|  |  | 
|  | static struct device_attribute * const mwave_dev_attrs[] = { | 
|  | &dev_attr_3780i_dma, | 
|  | &dev_attr_3780i_irq, | 
|  | &dev_attr_3780i_io, | 
|  | &dev_attr_uart_irq, | 
|  | &dev_attr_uart_io, | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * mwave_init is called on module load | 
|  | * | 
|  | * mwave_exit is called on module unload | 
|  | * mwave_exit is also used to clean up after an aborted mwave_init | 
|  | */ | 
|  | static void mwave_exit(void) | 
|  | { | 
|  | pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd; | 
|  |  | 
|  | PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_exit entry\n"); | 
|  |  | 
|  | #if 0 | 
|  | for (i = 0; i < pDrvData->nr_registered_attrs; i++) | 
|  | device_remove_file(&mwave_device, mwave_dev_attrs[i]); | 
|  | pDrvData->nr_registered_attrs = 0; | 
|  |  | 
|  | if (pDrvData->device_registered) { | 
|  | device_unregister(&mwave_device); | 
|  | pDrvData->device_registered = false; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | if ( pDrvData->sLine >= 0 ) { | 
|  | serial8250_unregister_port(pDrvData->sLine); | 
|  | } | 
|  | if (pDrvData->bMwaveDevRegistered) { | 
|  | misc_deregister(&mwave_misc_dev); | 
|  | } | 
|  | if (pDrvData->bDSPEnabled) { | 
|  | tp3780I_DisableDSP(&pDrvData->rBDData); | 
|  | } | 
|  | if (pDrvData->bResourcesClaimed) { | 
|  | tp3780I_ReleaseResources(&pDrvData->rBDData); | 
|  | } | 
|  | if (pDrvData->bBDInitialized) { | 
|  | tp3780I_Cleanup(&pDrvData->rBDData); | 
|  | } | 
|  |  | 
|  | PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_exit exit\n"); | 
|  | } | 
|  |  | 
|  | module_exit(mwave_exit); | 
|  |  | 
|  | static int __init mwave_init(void) | 
|  | { | 
|  | int i; | 
|  | int retval = 0; | 
|  | pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd; | 
|  |  | 
|  | PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_init entry\n"); | 
|  |  | 
|  | memset(&mwave_s_mdd, 0, sizeof(MWAVE_DEVICE_DATA)); | 
|  |  | 
|  | pDrvData->bBDInitialized = false; | 
|  | pDrvData->bResourcesClaimed = false; | 
|  | pDrvData->bDSPEnabled = false; | 
|  | pDrvData->bDSPReset = false; | 
|  | pDrvData->bMwaveDevRegistered = false; | 
|  | pDrvData->sLine = -1; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(pDrvData->IPCs); i++) { | 
|  | pDrvData->IPCs[i].bIsEnabled = false; | 
|  | pDrvData->IPCs[i].bIsHere = false; | 
|  | pDrvData->IPCs[i].usIntCount = 0;	/* no ints received yet */ | 
|  | init_waitqueue_head(&pDrvData->IPCs[i].ipc_wait_queue); | 
|  | } | 
|  |  | 
|  | retval = tp3780I_InitializeBoardData(&pDrvData->rBDData); | 
|  | PRINTK_2(TRACE_MWAVE, | 
|  | "mwavedd::mwave_init, return from tp3780I_InitializeBoardData" | 
|  | " retval %x\n", | 
|  | retval); | 
|  | if (retval) { | 
|  | PRINTK_ERROR(KERN_ERR_MWAVE | 
|  | "mwavedd::mwave_init: Error:" | 
|  | " Failed to initialize board data\n"); | 
|  | goto cleanup_error; | 
|  | } | 
|  | pDrvData->bBDInitialized = true; | 
|  |  | 
|  | retval = tp3780I_CalcResources(&pDrvData->rBDData); | 
|  | PRINTK_2(TRACE_MWAVE, | 
|  | "mwavedd::mwave_init, return from tp3780I_CalcResources" | 
|  | " retval %x\n", | 
|  | retval); | 
|  | if (retval) { | 
|  | PRINTK_ERROR(KERN_ERR_MWAVE | 
|  | "mwavedd:mwave_init: Error:" | 
|  | " Failed to calculate resources\n"); | 
|  | goto cleanup_error; | 
|  | } | 
|  |  | 
|  | retval = tp3780I_ClaimResources(&pDrvData->rBDData); | 
|  | PRINTK_2(TRACE_MWAVE, | 
|  | "mwavedd::mwave_init, return from tp3780I_ClaimResources" | 
|  | " retval %x\n", | 
|  | retval); | 
|  | if (retval) { | 
|  | PRINTK_ERROR(KERN_ERR_MWAVE | 
|  | "mwavedd:mwave_init: Error:" | 
|  | " Failed to claim resources\n"); | 
|  | goto cleanup_error; | 
|  | } | 
|  | pDrvData->bResourcesClaimed = true; | 
|  |  | 
|  | retval = tp3780I_EnableDSP(&pDrvData->rBDData); | 
|  | PRINTK_2(TRACE_MWAVE, | 
|  | "mwavedd::mwave_init, return from tp3780I_EnableDSP" | 
|  | " retval %x\n", | 
|  | retval); | 
|  | if (retval) { | 
|  | PRINTK_ERROR(KERN_ERR_MWAVE | 
|  | "mwavedd:mwave_init: Error:" | 
|  | " Failed to enable DSP\n"); | 
|  | goto cleanup_error; | 
|  | } | 
|  | pDrvData->bDSPEnabled = true; | 
|  |  | 
|  | if (misc_register(&mwave_misc_dev) < 0) { | 
|  | PRINTK_ERROR(KERN_ERR_MWAVE | 
|  | "mwavedd:mwave_init: Error:" | 
|  | " Failed to register misc device\n"); | 
|  | goto cleanup_error; | 
|  | } | 
|  | pDrvData->bMwaveDevRegistered = true; | 
|  |  | 
|  | pDrvData->sLine = register_serial_portandirq( | 
|  | pDrvData->rBDData.rDspSettings.usUartBaseIO, | 
|  | pDrvData->rBDData.rDspSettings.usUartIrq | 
|  | ); | 
|  | if (pDrvData->sLine < 0) { | 
|  | PRINTK_ERROR(KERN_ERR_MWAVE | 
|  | "mwavedd:mwave_init: Error:" | 
|  | " Failed to register serial driver\n"); | 
|  | goto cleanup_error; | 
|  | } | 
|  | /* uart is registered */ | 
|  |  | 
|  | #if 0 | 
|  | /* sysfs */ | 
|  | memset(&mwave_device, 0, sizeof (struct device)); | 
|  | dev_set_name(&mwave_device, "mwave"); | 
|  |  | 
|  | if (device_register(&mwave_device)) | 
|  | goto cleanup_error; | 
|  | pDrvData->device_registered = true; | 
|  | for (i = 0; i < ARRAY_SIZE(mwave_dev_attrs); i++) { | 
|  | if(device_create_file(&mwave_device, mwave_dev_attrs[i])) { | 
|  | PRINTK_ERROR(KERN_ERR_MWAVE | 
|  | "mwavedd:mwave_init: Error:" | 
|  | " Failed to create sysfs file %s\n", | 
|  | mwave_dev_attrs[i]->attr.name); | 
|  | goto cleanup_error; | 
|  | } | 
|  | pDrvData->nr_registered_attrs++; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* SUCCESS! */ | 
|  | return 0; | 
|  |  | 
|  | cleanup_error: | 
|  | PRINTK_ERROR(KERN_ERR_MWAVE | 
|  | "mwavedd::mwave_init: Error:" | 
|  | " Failed to initialize\n"); | 
|  | mwave_exit(); /* clean up */ | 
|  |  | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | module_init(mwave_init); | 
|  |  |