|  | /* | 
|  | * omap-mcbsp.c  --  OMAP ALSA SoC DAI driver using McBSP port | 
|  | * | 
|  | * Copyright (C) 2008 Nokia Corporation | 
|  | * | 
|  | * Contact: Jarkko Nikula <jarkko.nikula@bitmer.com> | 
|  | *          Peter Ujfalusi <peter.ujfalusi@ti.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * version 2 as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but | 
|  | * WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | 
|  | * 02110-1301 USA | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/pm_runtime.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/of_device.h> | 
|  | #include <sound/core.h> | 
|  | #include <sound/pcm.h> | 
|  | #include <sound/pcm_params.h> | 
|  | #include <sound/initval.h> | 
|  | #include <sound/soc.h> | 
|  | #include <sound/dmaengine_pcm.h> | 
|  | #include <sound/omap-pcm.h> | 
|  |  | 
|  | #include <linux/platform_data/asoc-ti-mcbsp.h> | 
|  | #include "mcbsp.h" | 
|  | #include "omap-mcbsp.h" | 
|  |  | 
|  | #define OMAP_MCBSP_RATES	(SNDRV_PCM_RATE_8000_96000) | 
|  |  | 
|  | #define OMAP_MCBSP_SOC_SINGLE_S16_EXT(xname, xmin, xmax, \ | 
|  | xhandler_get, xhandler_put) \ | 
|  | {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ | 
|  | .info = omap_mcbsp_st_info_volsw, \ | 
|  | .get = xhandler_get, .put = xhandler_put, \ | 
|  | .private_value = (unsigned long) &(struct soc_mixer_control) \ | 
|  | {.min = xmin, .max = xmax} } | 
|  |  | 
|  | enum { | 
|  | OMAP_MCBSP_WORD_8 = 0, | 
|  | OMAP_MCBSP_WORD_12, | 
|  | OMAP_MCBSP_WORD_16, | 
|  | OMAP_MCBSP_WORD_20, | 
|  | OMAP_MCBSP_WORD_24, | 
|  | OMAP_MCBSP_WORD_32, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Stream DMA parameters. DMA request line and port address are set runtime | 
|  | * since they are different between OMAP1 and later OMAPs | 
|  | */ | 
|  | static void omap_mcbsp_set_threshold(struct snd_pcm_substream *substream, | 
|  | unsigned int packet_size) | 
|  | { | 
|  | struct snd_soc_pcm_runtime *rtd = substream->private_data; | 
|  | struct snd_soc_dai *cpu_dai = rtd->cpu_dai; | 
|  | struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai); | 
|  | int words; | 
|  |  | 
|  | /* | 
|  | * Configure McBSP threshold based on either: | 
|  | * packet_size, when the sDMA is in packet mode, or based on the | 
|  | * period size in THRESHOLD mode, otherwise use McBSP threshold = 1 | 
|  | * for mono streams. | 
|  | */ | 
|  | if (packet_size) | 
|  | words = packet_size; | 
|  | else | 
|  | words = 1; | 
|  |  | 
|  | /* Configure McBSP internal buffer usage */ | 
|  | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) | 
|  | omap_mcbsp_set_tx_threshold(mcbsp, words); | 
|  | else | 
|  | omap_mcbsp_set_rx_threshold(mcbsp, words); | 
|  | } | 
|  |  | 
|  | static int omap_mcbsp_hwrule_min_buffersize(struct snd_pcm_hw_params *params, | 
|  | struct snd_pcm_hw_rule *rule) | 
|  | { | 
|  | struct snd_interval *buffer_size = hw_param_interval(params, | 
|  | SNDRV_PCM_HW_PARAM_BUFFER_SIZE); | 
|  | struct snd_interval *channels = hw_param_interval(params, | 
|  | SNDRV_PCM_HW_PARAM_CHANNELS); | 
|  | struct omap_mcbsp *mcbsp = rule->private; | 
|  | struct snd_interval frames; | 
|  | int size; | 
|  |  | 
|  | snd_interval_any(&frames); | 
|  | size = mcbsp->pdata->buffer_size; | 
|  |  | 
|  | frames.min = size / channels->min; | 
|  | frames.integer = 1; | 
|  | return snd_interval_refine(buffer_size, &frames); | 
|  | } | 
|  |  | 
|  | static int omap_mcbsp_dai_startup(struct snd_pcm_substream *substream, | 
|  | struct snd_soc_dai *cpu_dai) | 
|  | { | 
|  | struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai); | 
|  | int err = 0; | 
|  |  | 
|  | if (!cpu_dai->active) | 
|  | err = omap_mcbsp_request(mcbsp); | 
|  |  | 
|  | /* | 
|  | * OMAP3 McBSP FIFO is word structured. | 
|  | * McBSP2 has 1024 + 256 = 1280 word long buffer, | 
|  | * McBSP1,3,4,5 has 128 word long buffer | 
|  | * This means that the size of the FIFO depends on the sample format. | 
|  | * For example on McBSP3: | 
|  | * 16bit samples: size is 128 * 2 = 256 bytes | 
|  | * 32bit samples: size is 128 * 4 = 512 bytes | 
|  | * It is simpler to place constraint for buffer and period based on | 
|  | * channels. | 
|  | * McBSP3 as example again (16 or 32 bit samples): | 
|  | * 1 channel (mono): size is 128 frames (128 words) | 
|  | * 2 channels (stereo): size is 128 / 2 = 64 frames (2 * 64 words) | 
|  | * 4 channels: size is 128 / 4 = 32 frames (4 * 32 words) | 
|  | */ | 
|  | if (mcbsp->pdata->buffer_size) { | 
|  | /* | 
|  | * Rule for the buffer size. We should not allow | 
|  | * smaller buffer than the FIFO size to avoid underruns. | 
|  | * This applies only for the playback stream. | 
|  | */ | 
|  | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) | 
|  | snd_pcm_hw_rule_add(substream->runtime, 0, | 
|  | SNDRV_PCM_HW_PARAM_BUFFER_SIZE, | 
|  | omap_mcbsp_hwrule_min_buffersize, | 
|  | mcbsp, | 
|  | SNDRV_PCM_HW_PARAM_CHANNELS, -1); | 
|  |  | 
|  | /* Make sure, that the period size is always even */ | 
|  | snd_pcm_hw_constraint_step(substream->runtime, 0, | 
|  | SNDRV_PCM_HW_PARAM_PERIOD_SIZE, 2); | 
|  | } | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void omap_mcbsp_dai_shutdown(struct snd_pcm_substream *substream, | 
|  | struct snd_soc_dai *cpu_dai) | 
|  | { | 
|  | struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai); | 
|  |  | 
|  | if (!cpu_dai->active) { | 
|  | omap_mcbsp_free(mcbsp); | 
|  | mcbsp->configured = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int omap_mcbsp_dai_trigger(struct snd_pcm_substream *substream, int cmd, | 
|  | struct snd_soc_dai *cpu_dai) | 
|  | { | 
|  | struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai); | 
|  | int err = 0, play = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK); | 
|  |  | 
|  | switch (cmd) { | 
|  | case SNDRV_PCM_TRIGGER_START: | 
|  | case SNDRV_PCM_TRIGGER_RESUME: | 
|  | case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: | 
|  | mcbsp->active++; | 
|  | omap_mcbsp_start(mcbsp, play, !play); | 
|  | break; | 
|  |  | 
|  | case SNDRV_PCM_TRIGGER_STOP: | 
|  | case SNDRV_PCM_TRIGGER_SUSPEND: | 
|  | case SNDRV_PCM_TRIGGER_PAUSE_PUSH: | 
|  | omap_mcbsp_stop(mcbsp, play, !play); | 
|  | mcbsp->active--; | 
|  | break; | 
|  | default: | 
|  | err = -EINVAL; | 
|  | } | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static snd_pcm_sframes_t omap_mcbsp_dai_delay( | 
|  | struct snd_pcm_substream *substream, | 
|  | struct snd_soc_dai *dai) | 
|  | { | 
|  | struct snd_soc_pcm_runtime *rtd = substream->private_data; | 
|  | struct snd_soc_dai *cpu_dai = rtd->cpu_dai; | 
|  | struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai); | 
|  | u16 fifo_use; | 
|  | snd_pcm_sframes_t delay; | 
|  |  | 
|  | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) | 
|  | fifo_use = omap_mcbsp_get_tx_delay(mcbsp); | 
|  | else | 
|  | fifo_use = omap_mcbsp_get_rx_delay(mcbsp); | 
|  |  | 
|  | /* | 
|  | * Divide the used locations with the channel count to get the | 
|  | * FIFO usage in samples (don't care about partial samples in the | 
|  | * buffer). | 
|  | */ | 
|  | delay = fifo_use / substream->runtime->channels; | 
|  |  | 
|  | return delay; | 
|  | } | 
|  |  | 
|  | static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream, | 
|  | struct snd_pcm_hw_params *params, | 
|  | struct snd_soc_dai *cpu_dai) | 
|  | { | 
|  | struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai); | 
|  | struct omap_mcbsp_reg_cfg *regs = &mcbsp->cfg_regs; | 
|  | struct snd_dmaengine_dai_dma_data *dma_data; | 
|  | int wlen, channels, wpf; | 
|  | int pkt_size = 0; | 
|  | unsigned int format, div, framesize, master; | 
|  |  | 
|  | dma_data = snd_soc_dai_get_dma_data(cpu_dai, substream); | 
|  | channels = params_channels(params); | 
|  |  | 
|  | switch (params_format(params)) { | 
|  | case SNDRV_PCM_FORMAT_S16_LE: | 
|  | wlen = 16; | 
|  | break; | 
|  | case SNDRV_PCM_FORMAT_S32_LE: | 
|  | wlen = 32; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | if (mcbsp->pdata->buffer_size) { | 
|  | if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) { | 
|  | int period_words, max_thrsh; | 
|  | int divider = 0; | 
|  |  | 
|  | period_words = params_period_bytes(params) / (wlen / 8); | 
|  | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) | 
|  | max_thrsh = mcbsp->max_tx_thres; | 
|  | else | 
|  | max_thrsh = mcbsp->max_rx_thres; | 
|  | /* | 
|  | * Use sDMA packet mode if McBSP is in threshold mode: | 
|  | * If period words less than the FIFO size the packet | 
|  | * size is set to the number of period words, otherwise | 
|  | * Look for the biggest threshold value which divides | 
|  | * the period size evenly. | 
|  | */ | 
|  | divider = period_words / max_thrsh; | 
|  | if (period_words % max_thrsh) | 
|  | divider++; | 
|  | while (period_words % divider && | 
|  | divider < period_words) | 
|  | divider++; | 
|  | if (divider == period_words) | 
|  | return -EINVAL; | 
|  |  | 
|  | pkt_size = period_words / divider; | 
|  | } else if (channels > 1) { | 
|  | /* Use packet mode for non mono streams */ | 
|  | pkt_size = channels; | 
|  | } | 
|  | omap_mcbsp_set_threshold(substream, pkt_size); | 
|  | } | 
|  |  | 
|  | dma_data->maxburst = pkt_size; | 
|  |  | 
|  | if (mcbsp->configured) { | 
|  | /* McBSP already configured by another stream */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | regs->rcr2	&= ~(RPHASE | RFRLEN2(0x7f) | RWDLEN2(7)); | 
|  | regs->xcr2	&= ~(RPHASE | XFRLEN2(0x7f) | XWDLEN2(7)); | 
|  | regs->rcr1	&= ~(RFRLEN1(0x7f) | RWDLEN1(7)); | 
|  | regs->xcr1	&= ~(XFRLEN1(0x7f) | XWDLEN1(7)); | 
|  | format = mcbsp->fmt & SND_SOC_DAIFMT_FORMAT_MASK; | 
|  | wpf = channels; | 
|  | if (channels == 2 && (format == SND_SOC_DAIFMT_I2S || | 
|  | format == SND_SOC_DAIFMT_LEFT_J)) { | 
|  | /* Use dual-phase frames */ | 
|  | regs->rcr2	|= RPHASE; | 
|  | regs->xcr2	|= XPHASE; | 
|  | /* Set 1 word per (McBSP) frame for phase1 and phase2 */ | 
|  | wpf--; | 
|  | regs->rcr2	|= RFRLEN2(wpf - 1); | 
|  | regs->xcr2	|= XFRLEN2(wpf - 1); | 
|  | } | 
|  |  | 
|  | regs->rcr1	|= RFRLEN1(wpf - 1); | 
|  | regs->xcr1	|= XFRLEN1(wpf - 1); | 
|  |  | 
|  | switch (params_format(params)) { | 
|  | case SNDRV_PCM_FORMAT_S16_LE: | 
|  | /* Set word lengths */ | 
|  | regs->rcr2	|= RWDLEN2(OMAP_MCBSP_WORD_16); | 
|  | regs->rcr1	|= RWDLEN1(OMAP_MCBSP_WORD_16); | 
|  | regs->xcr2	|= XWDLEN2(OMAP_MCBSP_WORD_16); | 
|  | regs->xcr1	|= XWDLEN1(OMAP_MCBSP_WORD_16); | 
|  | break; | 
|  | case SNDRV_PCM_FORMAT_S32_LE: | 
|  | /* Set word lengths */ | 
|  | regs->rcr2	|= RWDLEN2(OMAP_MCBSP_WORD_32); | 
|  | regs->rcr1	|= RWDLEN1(OMAP_MCBSP_WORD_32); | 
|  | regs->xcr2	|= XWDLEN2(OMAP_MCBSP_WORD_32); | 
|  | regs->xcr1	|= XWDLEN1(OMAP_MCBSP_WORD_32); | 
|  | break; | 
|  | default: | 
|  | /* Unsupported PCM format */ | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* In McBSP master modes, FRAME (i.e. sample rate) is generated | 
|  | * by _counting_ BCLKs. Calculate frame size in BCLKs */ | 
|  | master = mcbsp->fmt & SND_SOC_DAIFMT_MASTER_MASK; | 
|  | if (master ==	SND_SOC_DAIFMT_CBS_CFS) { | 
|  | div = mcbsp->clk_div ? mcbsp->clk_div : 1; | 
|  | framesize = (mcbsp->in_freq / div) / params_rate(params); | 
|  |  | 
|  | if (framesize < wlen * channels) { | 
|  | printk(KERN_ERR "%s: not enough bandwidth for desired rate and " | 
|  | "channels\n", __func__); | 
|  | return -EINVAL; | 
|  | } | 
|  | } else | 
|  | framesize = wlen * channels; | 
|  |  | 
|  | /* Set FS period and length in terms of bit clock periods */ | 
|  | regs->srgr2	&= ~FPER(0xfff); | 
|  | regs->srgr1	&= ~FWID(0xff); | 
|  | switch (format) { | 
|  | case SND_SOC_DAIFMT_I2S: | 
|  | case SND_SOC_DAIFMT_LEFT_J: | 
|  | regs->srgr2	|= FPER(framesize - 1); | 
|  | regs->srgr1	|= FWID((framesize >> 1) - 1); | 
|  | break; | 
|  | case SND_SOC_DAIFMT_DSP_A: | 
|  | case SND_SOC_DAIFMT_DSP_B: | 
|  | regs->srgr2	|= FPER(framesize - 1); | 
|  | regs->srgr1	|= FWID(0); | 
|  | break; | 
|  | } | 
|  |  | 
|  | omap_mcbsp_config(mcbsp, &mcbsp->cfg_regs); | 
|  | mcbsp->wlen = wlen; | 
|  | mcbsp->configured = 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This must be called before _set_clkdiv and _set_sysclk since McBSP register | 
|  | * cache is initialized here | 
|  | */ | 
|  | static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai, | 
|  | unsigned int fmt) | 
|  | { | 
|  | struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai); | 
|  | struct omap_mcbsp_reg_cfg *regs = &mcbsp->cfg_regs; | 
|  | bool inv_fs = false; | 
|  |  | 
|  | if (mcbsp->configured) | 
|  | return 0; | 
|  |  | 
|  | mcbsp->fmt = fmt; | 
|  | memset(regs, 0, sizeof(*regs)); | 
|  | /* Generic McBSP register settings */ | 
|  | regs->spcr2	|= XINTM(3) | FREE; | 
|  | regs->spcr1	|= RINTM(3); | 
|  | /* RFIG and XFIG are not defined in 2430 and on OMAP3+ */ | 
|  | if (!mcbsp->pdata->has_ccr) { | 
|  | regs->rcr2	|= RFIG; | 
|  | regs->xcr2	|= XFIG; | 
|  | } | 
|  |  | 
|  | /* Configure XCCR/RCCR only for revisions which have ccr registers */ | 
|  | if (mcbsp->pdata->has_ccr) { | 
|  | regs->xccr = DXENDLY(1) | XDMAEN | XDISABLE; | 
|  | regs->rccr = RFULL_CYCLE | RDMAEN | RDISABLE; | 
|  | } | 
|  |  | 
|  | switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { | 
|  | case SND_SOC_DAIFMT_I2S: | 
|  | /* 1-bit data delay */ | 
|  | regs->rcr2	|= RDATDLY(1); | 
|  | regs->xcr2	|= XDATDLY(1); | 
|  | break; | 
|  | case SND_SOC_DAIFMT_LEFT_J: | 
|  | /* 0-bit data delay */ | 
|  | regs->rcr2	|= RDATDLY(0); | 
|  | regs->xcr2	|= XDATDLY(0); | 
|  | regs->spcr1	|= RJUST(2); | 
|  | /* Invert FS polarity configuration */ | 
|  | inv_fs = true; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_DSP_A: | 
|  | /* 1-bit data delay */ | 
|  | regs->rcr2      |= RDATDLY(1); | 
|  | regs->xcr2      |= XDATDLY(1); | 
|  | /* Invert FS polarity configuration */ | 
|  | inv_fs = true; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_DSP_B: | 
|  | /* 0-bit data delay */ | 
|  | regs->rcr2      |= RDATDLY(0); | 
|  | regs->xcr2      |= XDATDLY(0); | 
|  | /* Invert FS polarity configuration */ | 
|  | inv_fs = true; | 
|  | break; | 
|  | default: | 
|  | /* Unsupported data format */ | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { | 
|  | case SND_SOC_DAIFMT_CBS_CFS: | 
|  | /* McBSP master. Set FS and bit clocks as outputs */ | 
|  | regs->pcr0	|= FSXM | FSRM | | 
|  | CLKXM | CLKRM; | 
|  | /* Sample rate generator drives the FS */ | 
|  | regs->srgr2	|= FSGM; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_CBM_CFS: | 
|  | /* McBSP slave. FS clock as output */ | 
|  | regs->srgr2	|= FSGM; | 
|  | regs->pcr0	|= FSXM | FSRM; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_CBM_CFM: | 
|  | /* McBSP slave */ | 
|  | break; | 
|  | default: | 
|  | /* Unsupported master/slave configuration */ | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* Set bit clock (CLKX/CLKR) and FS polarities */ | 
|  | switch (fmt & SND_SOC_DAIFMT_INV_MASK) { | 
|  | case SND_SOC_DAIFMT_NB_NF: | 
|  | /* | 
|  | * Normal BCLK + FS. | 
|  | * FS active low. TX data driven on falling edge of bit clock | 
|  | * and RX data sampled on rising edge of bit clock. | 
|  | */ | 
|  | regs->pcr0	|= FSXP | FSRP | | 
|  | CLKXP | CLKRP; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_NB_IF: | 
|  | regs->pcr0	|= CLKXP | CLKRP; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_IB_NF: | 
|  | regs->pcr0	|= FSXP | FSRP; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_IB_IF: | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | if (inv_fs == true) | 
|  | regs->pcr0 ^= FSXP | FSRP; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int omap_mcbsp_dai_set_clkdiv(struct snd_soc_dai *cpu_dai, | 
|  | int div_id, int div) | 
|  | { | 
|  | struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai); | 
|  | struct omap_mcbsp_reg_cfg *regs = &mcbsp->cfg_regs; | 
|  |  | 
|  | if (div_id != OMAP_MCBSP_CLKGDV) | 
|  | return -ENODEV; | 
|  |  | 
|  | mcbsp->clk_div = div; | 
|  | regs->srgr1	&= ~CLKGDV(0xff); | 
|  | regs->srgr1	|= CLKGDV(div - 1); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai, | 
|  | int clk_id, unsigned int freq, | 
|  | int dir) | 
|  | { | 
|  | struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai); | 
|  | struct omap_mcbsp_reg_cfg *regs = &mcbsp->cfg_regs; | 
|  | int err = 0; | 
|  |  | 
|  | if (mcbsp->active) { | 
|  | if (freq == mcbsp->in_freq) | 
|  | return 0; | 
|  | else | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | mcbsp->in_freq = freq; | 
|  | regs->srgr2 &= ~CLKSM; | 
|  | regs->pcr0 &= ~SCLKME; | 
|  |  | 
|  | switch (clk_id) { | 
|  | case OMAP_MCBSP_SYSCLK_CLK: | 
|  | regs->srgr2	|= CLKSM; | 
|  | break; | 
|  | case OMAP_MCBSP_SYSCLK_CLKS_FCLK: | 
|  | if (mcbsp_omap1()) { | 
|  | err = -EINVAL; | 
|  | break; | 
|  | } | 
|  | err = omap2_mcbsp_set_clks_src(mcbsp, | 
|  | MCBSP_CLKS_PRCM_SRC); | 
|  | break; | 
|  | case OMAP_MCBSP_SYSCLK_CLKS_EXT: | 
|  | if (mcbsp_omap1()) { | 
|  | err = 0; | 
|  | break; | 
|  | } | 
|  | err = omap2_mcbsp_set_clks_src(mcbsp, | 
|  | MCBSP_CLKS_PAD_SRC); | 
|  | break; | 
|  |  | 
|  | case OMAP_MCBSP_SYSCLK_CLKX_EXT: | 
|  | regs->srgr2	|= CLKSM; | 
|  | regs->pcr0	|= SCLKME; | 
|  | /* | 
|  | * If McBSP is master but yet the CLKX/CLKR pin drives the SRG, | 
|  | * disable output on those pins. This enables to inject the | 
|  | * reference clock through CLKX/CLKR. For this to work | 
|  | * set_dai_sysclk() _needs_ to be called after set_dai_fmt(). | 
|  | */ | 
|  | regs->pcr0	&= ~CLKXM; | 
|  | break; | 
|  | case OMAP_MCBSP_SYSCLK_CLKR_EXT: | 
|  | regs->pcr0	|= SCLKME; | 
|  | /* Disable ouput on CLKR pin in master mode */ | 
|  | regs->pcr0	&= ~CLKRM; | 
|  | break; | 
|  | default: | 
|  | err = -ENODEV; | 
|  | } | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static const struct snd_soc_dai_ops mcbsp_dai_ops = { | 
|  | .startup	= omap_mcbsp_dai_startup, | 
|  | .shutdown	= omap_mcbsp_dai_shutdown, | 
|  | .trigger	= omap_mcbsp_dai_trigger, | 
|  | .delay		= omap_mcbsp_dai_delay, | 
|  | .hw_params	= omap_mcbsp_dai_hw_params, | 
|  | .set_fmt	= omap_mcbsp_dai_set_dai_fmt, | 
|  | .set_clkdiv	= omap_mcbsp_dai_set_clkdiv, | 
|  | .set_sysclk	= omap_mcbsp_dai_set_dai_sysclk, | 
|  | }; | 
|  |  | 
|  | static int omap_mcbsp_probe(struct snd_soc_dai *dai) | 
|  | { | 
|  | struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(dai); | 
|  |  | 
|  | pm_runtime_enable(mcbsp->dev); | 
|  |  | 
|  | snd_soc_dai_init_dma_data(dai, | 
|  | &mcbsp->dma_data[SNDRV_PCM_STREAM_PLAYBACK], | 
|  | &mcbsp->dma_data[SNDRV_PCM_STREAM_CAPTURE]); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int omap_mcbsp_remove(struct snd_soc_dai *dai) | 
|  | { | 
|  | struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(dai); | 
|  |  | 
|  | pm_runtime_disable(mcbsp->dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct snd_soc_dai_driver omap_mcbsp_dai = { | 
|  | .probe = omap_mcbsp_probe, | 
|  | .remove = omap_mcbsp_remove, | 
|  | .playback = { | 
|  | .channels_min = 1, | 
|  | .channels_max = 16, | 
|  | .rates = OMAP_MCBSP_RATES, | 
|  | .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE, | 
|  | }, | 
|  | .capture = { | 
|  | .channels_min = 1, | 
|  | .channels_max = 16, | 
|  | .rates = OMAP_MCBSP_RATES, | 
|  | .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE, | 
|  | }, | 
|  | .ops = &mcbsp_dai_ops, | 
|  | }; | 
|  |  | 
|  | static const struct snd_soc_component_driver omap_mcbsp_component = { | 
|  | .name		= "omap-mcbsp", | 
|  | }; | 
|  |  | 
|  | static int omap_mcbsp_st_info_volsw(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_info *uinfo) | 
|  | { | 
|  | struct soc_mixer_control *mc = | 
|  | (struct soc_mixer_control *)kcontrol->private_value; | 
|  | int max = mc->max; | 
|  | int min = mc->min; | 
|  |  | 
|  | uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; | 
|  | uinfo->count = 1; | 
|  | uinfo->value.integer.min = min; | 
|  | uinfo->value.integer.max = max; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #define OMAP_MCBSP_ST_CHANNEL_VOLUME(channel)				\ | 
|  | static int								\ | 
|  | omap_mcbsp_set_st_ch##channel##_volume(struct snd_kcontrol *kc,		\ | 
|  | struct snd_ctl_elem_value *uc)	\ | 
|  | {									\ | 
|  | struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kc);		\ | 
|  | struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);	\ | 
|  | struct soc_mixer_control *mc =					\ | 
|  | (struct soc_mixer_control *)kc->private_value;		\ | 
|  | int max = mc->max;						\ | 
|  | int min = mc->min;						\ | 
|  | int val = uc->value.integer.value[0];				\ | 
|  | \ | 
|  | if (val < min || val > max)					\ | 
|  | return -EINVAL;						\ | 
|  | \ | 
|  | /* OMAP McBSP implementation uses index values 0..4 */		\ | 
|  | return omap_st_set_chgain(mcbsp, channel, val);			\ | 
|  | }									\ | 
|  | \ | 
|  | static int								\ | 
|  | omap_mcbsp_get_st_ch##channel##_volume(struct snd_kcontrol *kc,		\ | 
|  | struct snd_ctl_elem_value *uc)	\ | 
|  | {									\ | 
|  | struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kc);		\ | 
|  | struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);	\ | 
|  | s16 chgain;							\ | 
|  | \ | 
|  | if (omap_st_get_chgain(mcbsp, channel, &chgain))		\ | 
|  | return -EAGAIN;						\ | 
|  | \ | 
|  | uc->value.integer.value[0] = chgain;				\ | 
|  | return 0;							\ | 
|  | } | 
|  |  | 
|  | OMAP_MCBSP_ST_CHANNEL_VOLUME(0) | 
|  | OMAP_MCBSP_ST_CHANNEL_VOLUME(1) | 
|  |  | 
|  | static int omap_mcbsp_st_put_mode(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol); | 
|  | struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai); | 
|  | u8 value = ucontrol->value.integer.value[0]; | 
|  |  | 
|  | if (value == omap_st_is_enabled(mcbsp)) | 
|  | return 0; | 
|  |  | 
|  | if (value) | 
|  | omap_st_enable(mcbsp); | 
|  | else | 
|  | omap_st_disable(mcbsp); | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int omap_mcbsp_st_get_mode(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol); | 
|  | struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai); | 
|  |  | 
|  | ucontrol->value.integer.value[0] = omap_st_is_enabled(mcbsp); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #define OMAP_MCBSP_ST_CONTROLS(port)					  \ | 
|  | static const struct snd_kcontrol_new omap_mcbsp##port##_st_controls[] = { \ | 
|  | SOC_SINGLE_EXT("McBSP" #port " Sidetone Switch", 1, 0, 1, 0,		  \ | 
|  | omap_mcbsp_st_get_mode, omap_mcbsp_st_put_mode),		  \ | 
|  | OMAP_MCBSP_SOC_SINGLE_S16_EXT("McBSP" #port " Sidetone Channel 0 Volume", \ | 
|  | -32768, 32767,				  \ | 
|  | omap_mcbsp_get_st_ch0_volume,		  \ | 
|  | omap_mcbsp_set_st_ch0_volume),		  \ | 
|  | OMAP_MCBSP_SOC_SINGLE_S16_EXT("McBSP" #port " Sidetone Channel 1 Volume", \ | 
|  | -32768, 32767,				  \ | 
|  | omap_mcbsp_get_st_ch1_volume,		  \ | 
|  | omap_mcbsp_set_st_ch1_volume),		  \ | 
|  | } | 
|  |  | 
|  | OMAP_MCBSP_ST_CONTROLS(2); | 
|  | OMAP_MCBSP_ST_CONTROLS(3); | 
|  |  | 
|  | int omap_mcbsp_st_add_controls(struct snd_soc_pcm_runtime *rtd, int port_id) | 
|  | { | 
|  | struct snd_soc_dai *cpu_dai = rtd->cpu_dai; | 
|  | struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai); | 
|  |  | 
|  | if (!mcbsp->st_data) { | 
|  | dev_warn(mcbsp->dev, "No sidetone data for port\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | switch (port_id) { | 
|  | case 2: /* McBSP 2 */ | 
|  | return snd_soc_add_dai_controls(cpu_dai, | 
|  | omap_mcbsp2_st_controls, | 
|  | ARRAY_SIZE(omap_mcbsp2_st_controls)); | 
|  | case 3: /* McBSP 3 */ | 
|  | return snd_soc_add_dai_controls(cpu_dai, | 
|  | omap_mcbsp3_st_controls, | 
|  | ARRAY_SIZE(omap_mcbsp3_st_controls)); | 
|  | default: | 
|  | dev_err(mcbsp->dev, "Port %d not supported\n", port_id); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(omap_mcbsp_st_add_controls); | 
|  |  | 
|  | static struct omap_mcbsp_platform_data omap2420_pdata = { | 
|  | .reg_step = 4, | 
|  | .reg_size = 2, | 
|  | }; | 
|  |  | 
|  | static struct omap_mcbsp_platform_data omap2430_pdata = { | 
|  | .reg_step = 4, | 
|  | .reg_size = 4, | 
|  | .has_ccr = true, | 
|  | }; | 
|  |  | 
|  | static struct omap_mcbsp_platform_data omap3_pdata = { | 
|  | .reg_step = 4, | 
|  | .reg_size = 4, | 
|  | .has_ccr = true, | 
|  | .has_wakeup = true, | 
|  | }; | 
|  |  | 
|  | static struct omap_mcbsp_platform_data omap4_pdata = { | 
|  | .reg_step = 4, | 
|  | .reg_size = 4, | 
|  | .has_ccr = true, | 
|  | .has_wakeup = true, | 
|  | }; | 
|  |  | 
|  | static const struct of_device_id omap_mcbsp_of_match[] = { | 
|  | { | 
|  | .compatible = "ti,omap2420-mcbsp", | 
|  | .data = &omap2420_pdata, | 
|  | }, | 
|  | { | 
|  | .compatible = "ti,omap2430-mcbsp", | 
|  | .data = &omap2430_pdata, | 
|  | }, | 
|  | { | 
|  | .compatible = "ti,omap3-mcbsp", | 
|  | .data = &omap3_pdata, | 
|  | }, | 
|  | { | 
|  | .compatible = "ti,omap4-mcbsp", | 
|  | .data = &omap4_pdata, | 
|  | }, | 
|  | { }, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, omap_mcbsp_of_match); | 
|  |  | 
|  | static int asoc_mcbsp_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct omap_mcbsp_platform_data *pdata = dev_get_platdata(&pdev->dev); | 
|  | struct omap_mcbsp *mcbsp; | 
|  | const struct of_device_id *match; | 
|  | int ret; | 
|  |  | 
|  | match = of_match_device(omap_mcbsp_of_match, &pdev->dev); | 
|  | if (match) { | 
|  | struct device_node *node = pdev->dev.of_node; | 
|  | struct omap_mcbsp_platform_data *pdata_quirk = pdata; | 
|  | int buffer_size; | 
|  |  | 
|  | pdata = devm_kzalloc(&pdev->dev, | 
|  | sizeof(struct omap_mcbsp_platform_data), | 
|  | GFP_KERNEL); | 
|  | if (!pdata) | 
|  | return -ENOMEM; | 
|  |  | 
|  | memcpy(pdata, match->data, sizeof(*pdata)); | 
|  | if (!of_property_read_u32(node, "ti,buffer-size", &buffer_size)) | 
|  | pdata->buffer_size = buffer_size; | 
|  | if (pdata_quirk) | 
|  | pdata->force_ick_on = pdata_quirk->force_ick_on; | 
|  | } else if (!pdata) { | 
|  | dev_err(&pdev->dev, "missing platform data.\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  | mcbsp = devm_kzalloc(&pdev->dev, sizeof(struct omap_mcbsp), GFP_KERNEL); | 
|  | if (!mcbsp) | 
|  | return -ENOMEM; | 
|  |  | 
|  | mcbsp->id = pdev->id; | 
|  | mcbsp->pdata = pdata; | 
|  | mcbsp->dev = &pdev->dev; | 
|  | platform_set_drvdata(pdev, mcbsp); | 
|  |  | 
|  | ret = omap_mcbsp_init(pdev); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = devm_snd_soc_register_component(&pdev->dev, | 
|  | &omap_mcbsp_component, | 
|  | &omap_mcbsp_dai, 1); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return omap_pcm_platform_register(&pdev->dev); | 
|  | } | 
|  |  | 
|  | static int asoc_mcbsp_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev); | 
|  |  | 
|  | if (mcbsp->pdata->ops && mcbsp->pdata->ops->free) | 
|  | mcbsp->pdata->ops->free(mcbsp->id); | 
|  |  | 
|  | omap_mcbsp_cleanup(mcbsp); | 
|  |  | 
|  | clk_put(mcbsp->fclk); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver asoc_mcbsp_driver = { | 
|  | .driver = { | 
|  | .name = "omap-mcbsp", | 
|  | .of_match_table = omap_mcbsp_of_match, | 
|  | }, | 
|  |  | 
|  | .probe = asoc_mcbsp_probe, | 
|  | .remove = asoc_mcbsp_remove, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(asoc_mcbsp_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@bitmer.com>"); | 
|  | MODULE_DESCRIPTION("OMAP I2S SoC Interface"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_ALIAS("platform:omap-mcbsp"); |