|  | /* | 
|  | * sound/oss/pas2_midi.c | 
|  | * | 
|  | * The low level driver for the PAS Midi Interface. | 
|  | */ | 
|  | /* | 
|  | * Copyright (C) by Hannu Savolainen 1993-1997 | 
|  | * | 
|  | * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) | 
|  | * Version 2 (June 1991). See the "COPYING" file distributed with this software | 
|  | * for more info. | 
|  | * | 
|  | * Bartlomiej Zolnierkiewicz	: Added __init to pas_init_mixer() | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include "sound_config.h" | 
|  |  | 
|  | #include "pas2.h" | 
|  |  | 
|  | extern spinlock_t pas_lock; | 
|  |  | 
|  | static int      midi_busy, input_opened; | 
|  | static int      my_dev; | 
|  |  | 
|  | int pas2_mididev=-1; | 
|  |  | 
|  | static unsigned char tmp_queue[256]; | 
|  | static volatile int qlen; | 
|  | static volatile unsigned char qhead, qtail; | 
|  |  | 
|  | static void     (*midi_input_intr) (int dev, unsigned char data); | 
|  |  | 
|  | static int pas_midi_open(int dev, int mode, | 
|  | void            (*input) (int dev, unsigned char data), | 
|  | void            (*output) (int dev) | 
|  | ) | 
|  | { | 
|  | int             err; | 
|  | unsigned long   flags; | 
|  | unsigned char   ctrl; | 
|  |  | 
|  |  | 
|  | if (midi_busy) | 
|  | return -EBUSY; | 
|  |  | 
|  | /* | 
|  | * Reset input and output FIFO pointers | 
|  | */ | 
|  | pas_write(0x20 | 0x40, | 
|  | 0x178b); | 
|  |  | 
|  | spin_lock_irqsave(&pas_lock, flags); | 
|  |  | 
|  | if ((err = pas_set_intr(0x10)) < 0) | 
|  | { | 
|  | spin_unlock_irqrestore(&pas_lock, flags); | 
|  | return err; | 
|  | } | 
|  | /* | 
|  | * Enable input available and output FIFO empty interrupts | 
|  | */ | 
|  |  | 
|  | ctrl = 0; | 
|  | input_opened = 0; | 
|  | midi_input_intr = input; | 
|  |  | 
|  | if (mode == OPEN_READ || mode == OPEN_READWRITE) | 
|  | { | 
|  | ctrl |= 0x04;	/* Enable input */ | 
|  | input_opened = 1; | 
|  | } | 
|  | if (mode == OPEN_WRITE || mode == OPEN_READWRITE) | 
|  | { | 
|  | ctrl |= 0x08 | 0x10;	/* Enable output */ | 
|  | } | 
|  | pas_write(ctrl, 0x178b); | 
|  |  | 
|  | /* | 
|  | * Acknowledge any pending interrupts | 
|  | */ | 
|  |  | 
|  | pas_write(0xff, 0x1B88); | 
|  |  | 
|  | spin_unlock_irqrestore(&pas_lock, flags); | 
|  |  | 
|  | midi_busy = 1; | 
|  | qlen = qhead = qtail = 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void pas_midi_close(int dev) | 
|  | { | 
|  |  | 
|  | /* | 
|  | * Reset FIFO pointers, disable intrs | 
|  | */ | 
|  | pas_write(0x20 | 0x40, 0x178b); | 
|  |  | 
|  | pas_remove_intr(0x10); | 
|  | midi_busy = 0; | 
|  | } | 
|  |  | 
|  | static int dump_to_midi(unsigned char midi_byte) | 
|  | { | 
|  | int fifo_space, x; | 
|  |  | 
|  | fifo_space = ((x = pas_read(0x1B89)) >> 4) & 0x0f; | 
|  |  | 
|  | /* | 
|  | * The MIDI FIFO space register and it's documentation is nonunderstandable. | 
|  | * There seem to be no way to differentiate between buffer full and buffer | 
|  | * empty situations. For this reason we don't never write the buffer | 
|  | * completely full. In this way we can assume that 0 (or is it 15) | 
|  | * means that the buffer is empty. | 
|  | */ | 
|  |  | 
|  | if (fifo_space < 2 && fifo_space != 0)	/* Full (almost) */ | 
|  | return 0;	/* Ask upper layers to retry after some time */ | 
|  |  | 
|  | pas_write(midi_byte, 0x178A); | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int pas_midi_out(int dev, unsigned char midi_byte) | 
|  | { | 
|  |  | 
|  | unsigned long flags; | 
|  |  | 
|  | /* | 
|  | * Drain the local queue first | 
|  | */ | 
|  |  | 
|  | spin_lock_irqsave(&pas_lock, flags); | 
|  |  | 
|  | while (qlen && dump_to_midi(tmp_queue[qhead])) | 
|  | { | 
|  | qlen--; | 
|  | qhead++; | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&pas_lock, flags); | 
|  |  | 
|  | /* | 
|  | *	Output the byte if the local queue is empty. | 
|  | */ | 
|  |  | 
|  | if (!qlen) | 
|  | if (dump_to_midi(midi_byte)) | 
|  | return 1; | 
|  |  | 
|  | /* | 
|  | *	Put to the local queue | 
|  | */ | 
|  |  | 
|  | if (qlen >= 256) | 
|  | return 0;	/* Local queue full */ | 
|  |  | 
|  | spin_lock_irqsave(&pas_lock, flags); | 
|  |  | 
|  | tmp_queue[qtail] = midi_byte; | 
|  | qlen++; | 
|  | qtail++; | 
|  |  | 
|  | spin_unlock_irqrestore(&pas_lock, flags); | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int pas_midi_start_read(int dev) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int pas_midi_end_read(int dev) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void pas_midi_kick(int dev) | 
|  | { | 
|  | } | 
|  |  | 
|  | static int pas_buffer_status(int dev) | 
|  | { | 
|  | return qlen; | 
|  | } | 
|  |  | 
|  | #define MIDI_SYNTH_NAME	"Pro Audio Spectrum Midi" | 
|  | #define MIDI_SYNTH_CAPS	SYNTH_CAP_INPUT | 
|  | #include "midi_synth.h" | 
|  |  | 
|  | static struct midi_operations pas_midi_operations = | 
|  | { | 
|  | .owner		= THIS_MODULE, | 
|  | .info		= {"Pro Audio Spectrum", 0, 0, SNDCARD_PAS}, | 
|  | .converter	= &std_midi_synth, | 
|  | .in_info	= {0}, | 
|  | .open		= pas_midi_open, | 
|  | .close		= pas_midi_close, | 
|  | .outputc	= pas_midi_out, | 
|  | .start_read	= pas_midi_start_read, | 
|  | .end_read	= pas_midi_end_read, | 
|  | .kick		= pas_midi_kick, | 
|  | .buffer_status	= pas_buffer_status, | 
|  | }; | 
|  |  | 
|  | void __init pas_midi_init(void) | 
|  | { | 
|  | int dev = sound_alloc_mididev(); | 
|  |  | 
|  | if (dev == -1) | 
|  | { | 
|  | printk(KERN_WARNING "pas_midi_init: Too many midi devices detected\n"); | 
|  | return; | 
|  | } | 
|  | std_midi_synth.midi_dev = my_dev = dev; | 
|  | midi_devs[dev] = &pas_midi_operations; | 
|  | pas2_mididev = dev; | 
|  | sequencer_init(); | 
|  | } | 
|  |  | 
|  | void pas_midi_interrupt(void) | 
|  | { | 
|  | unsigned char   stat; | 
|  | int             i, incount; | 
|  |  | 
|  | stat = pas_read(0x1B88); | 
|  |  | 
|  | if (stat & 0x04)	/* Input data available */ | 
|  | { | 
|  | incount = pas_read(0x1B89) & 0x0f;	/* Input FIFO size */ | 
|  | if (!incount) | 
|  | incount = 16; | 
|  |  | 
|  | for (i = 0; i < incount; i++) | 
|  | if (input_opened) | 
|  | { | 
|  | midi_input_intr(my_dev, pas_read(0x178A)); | 
|  | } else | 
|  | pas_read(0x178A);	/* Flush */ | 
|  | } | 
|  | if (stat & (0x08 | 0x10)) | 
|  | { | 
|  | spin_lock(&pas_lock);/* called in irq context */ | 
|  |  | 
|  | while (qlen && dump_to_midi(tmp_queue[qhead])) | 
|  | { | 
|  | qlen--; | 
|  | qhead++; | 
|  | } | 
|  |  | 
|  | spin_unlock(&pas_lock); | 
|  | } | 
|  | if (stat & 0x40) | 
|  | { | 
|  | printk(KERN_WARNING "MIDI output overrun %x,%x\n", pas_read(0x1B89), stat); | 
|  | } | 
|  | pas_write(stat, 0x1B88);	/* Acknowledge interrupts */ | 
|  | } |