| /* |
| * P1010si Device Tree Source |
| * |
| * Copyright 2011 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| /dts-v1/; |
| / { |
| compatible = "fsl,P1010"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| PowerPC,P1010@0 { |
| device_type = "cpu"; |
| reg = <0x0>; |
| next-level-cache = <&L2>; |
| }; |
| }; |
| |
| ifc@ffe1e000 { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| compatible = "fsl,ifc", "simple-bus"; |
| reg = <0x0 0xffe1e000 0 0x2000>; |
| interrupts = <16 2 19 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| soc@ffe00000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| compatible = "fsl,p1010-immr", "simple-bus"; |
| ranges = <0x0 0x0 0xffe00000 0x100000>; |
| bus-frequency = <0>; // Filled out by uboot. |
| |
| ecm-law@0 { |
| compatible = "fsl,ecm-law"; |
| reg = <0x0 0x1000>; |
| fsl,num-laws = <12>; |
| }; |
| |
| ecm@1000 { |
| compatible = "fsl,p1010-ecm", "fsl,ecm"; |
| reg = <0x1000 0x1000>; |
| interrupts = <16 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| memory-controller@2000 { |
| compatible = "fsl,p1010-memory-controller"; |
| reg = <0x2000 0x1000>; |
| interrupt-parent = <&mpic>; |
| interrupts = <16 2>; |
| }; |
| |
| i2c@3000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <0>; |
| compatible = "fsl-i2c"; |
| reg = <0x3000 0x100>; |
| interrupts = <43 2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| }; |
| |
| i2c@3100 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <1>; |
| compatible = "fsl-i2c"; |
| reg = <0x3100 0x100>; |
| interrupts = <43 2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| }; |
| |
| serial0: serial@4500 { |
| cell-index = <0>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4500 0x100>; |
| clock-frequency = <0>; |
| interrupts = <42 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| serial1: serial@4600 { |
| cell-index = <1>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4600 0x100>; |
| clock-frequency = <0>; |
| interrupts = <42 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| spi@7000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,mpc8536-espi"; |
| reg = <0x7000 0x1000>; |
| interrupts = <59 0x2>; |
| interrupt-parent = <&mpic>; |
| fsl,espi-num-chipselects = <1>; |
| }; |
| |
| gpio: gpio-controller@f000 { |
| #gpio-cells = <2>; |
| compatible = "fsl,mpc8572-gpio"; |
| reg = <0xf000 0x100>; |
| interrupts = <47 0x2>; |
| interrupt-parent = <&mpic>; |
| gpio-controller; |
| }; |
| |
| sata@18000 { |
| compatible = "fsl,pq-sata-v2"; |
| reg = <0x18000 0x1000>; |
| cell-index = <1>; |
| interrupts = <74 0x2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| sata@19000 { |
| compatible = "fsl,pq-sata-v2"; |
| reg = <0x19000 0x1000>; |
| cell-index = <2>; |
| interrupts = <41 0x2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| can0@1c000 { |
| compatible = "fsl,flexcan-v1.0"; |
| reg = <0x1c000 0x1000>; |
| interrupts = <48 0x2>; |
| interrupt-parent = <&mpic>; |
| fsl,flexcan-clock-divider = <2>; |
| }; |
| |
| can1@1d000 { |
| compatible = "fsl,flexcan-v1.0"; |
| reg = <0x1d000 0x1000>; |
| interrupts = <61 0x2>; |
| interrupt-parent = <&mpic>; |
| fsl,flexcan-clock-divider = <2>; |
| }; |
| |
| L2: l2-cache-controller@20000 { |
| compatible = "fsl,p1010-l2-cache-controller", |
| "fsl,p1014-l2-cache-controller"; |
| reg = <0x20000 0x1000>; |
| cache-line-size = <32>; // 32 bytes |
| cache-size = <0x40000>; // L2,256K |
| interrupt-parent = <&mpic>; |
| interrupts = <16 2>; |
| }; |
| |
| dma@21300 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,p1010-dma", "fsl,eloplus-dma"; |
| reg = <0x21300 0x4>; |
| ranges = <0x0 0x21100 0x200>; |
| cell-index = <0>; |
| dma-channel@0 { |
| compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel"; |
| reg = <0x0 0x80>; |
| cell-index = <0>; |
| interrupt-parent = <&mpic>; |
| interrupts = <20 2>; |
| }; |
| dma-channel@80 { |
| compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel"; |
| reg = <0x80 0x80>; |
| cell-index = <1>; |
| interrupt-parent = <&mpic>; |
| interrupts = <21 2>; |
| }; |
| dma-channel@100 { |
| compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel"; |
| reg = <0x100 0x80>; |
| cell-index = <2>; |
| interrupt-parent = <&mpic>; |
| interrupts = <22 2>; |
| }; |
| dma-channel@180 { |
| compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel"; |
| reg = <0x180 0x80>; |
| cell-index = <3>; |
| interrupt-parent = <&mpic>; |
| interrupts = <23 2>; |
| }; |
| }; |
| |
| usb@22000 { |
| compatible = "fsl-usb2-dr"; |
| reg = <0x22000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupt-parent = <&mpic>; |
| interrupts = <28 0x2>; |
| dr_mode = "host"; |
| }; |
| |
| mdio@24000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,etsec2-mdio"; |
| reg = <0x24000 0x1000 0xb0030 0x4>; |
| }; |
| |
| mdio@25000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,etsec2-tbi"; |
| reg = <0x25000 0x1000 0xb1030 0x4>; |
| tbi0: tbi-phy@11 { |
| reg = <0x11>; |
| device_type = "tbi-phy"; |
| }; |
| }; |
| |
| mdio@26000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,etsec2-tbi"; |
| reg = <0x26000 0x1000 0xb1030 0x4>; |
| tbi1: tbi-phy@11 { |
| reg = <0x11>; |
| device_type = "tbi-phy"; |
| }; |
| }; |
| |
| sdhci@2e000 { |
| compatible = "fsl,esdhc"; |
| reg = <0x2e000 0x1000>; |
| interrupts = <72 0x8>; |
| interrupt-parent = <&mpic>; |
| /* Filled in by U-Boot */ |
| clock-frequency = <0>; |
| fsl,sdhci-auto-cmd12; |
| }; |
| |
| enet0: ethernet@b0000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "fsl,etsec2"; |
| fsl,num_rx_queues = <0x8>; |
| fsl,num_tx_queues = <0x8>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupt-parent = <&mpic>; |
| |
| queue-group@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xb0000 0x1000>; |
| fsl,rx-bit-map = <0xff>; |
| fsl,tx-bit-map = <0xff>; |
| interrupts = <29 2 30 2 34 2>; |
| }; |
| |
| }; |
| |
| enet1: ethernet@b1000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "fsl,etsec2"; |
| fsl,num_rx_queues = <0x8>; |
| fsl,num_tx_queues = <0x8>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupt-parent = <&mpic>; |
| |
| queue-group@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xb1000 0x1000>; |
| fsl,rx-bit-map = <0xff>; |
| fsl,tx-bit-map = <0xff>; |
| interrupts = <35 2 36 2 40 2>; |
| }; |
| |
| }; |
| |
| enet2: ethernet@b2000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "fsl,etsec2"; |
| fsl,num_rx_queues = <0x8>; |
| fsl,num_tx_queues = <0x8>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupt-parent = <&mpic>; |
| |
| queue-group@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xb2000 0x1000>; |
| fsl,rx-bit-map = <0xff>; |
| fsl,tx-bit-map = <0xff>; |
| interrupts = <31 2 32 2 33 2>; |
| }; |
| |
| }; |
| |
| mpic: pic@40000 { |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| reg = <0x40000 0x40000>; |
| compatible = "chrp,open-pic"; |
| device_type = "open-pic"; |
| }; |
| |
| msi@41600 { |
| compatible = "fsl,p1010-msi", "fsl,mpic-msi"; |
| reg = <0x41600 0x80>; |
| msi-available-ranges = <0 0x100>; |
| interrupts = < |
| 0xe0 0 |
| 0xe1 0 |
| 0xe2 0 |
| 0xe3 0 |
| 0xe4 0 |
| 0xe5 0 |
| 0xe6 0 |
| 0xe7 0>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| global-utilities@e0000 { //global utilities block |
| compatible = "fsl,p1010-guts"; |
| reg = <0xe0000 0x1000>; |
| fsl,has-rstcr; |
| }; |
| }; |
| |
| pci0: pcie@ffe09000 { |
| compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2"; |
| device_type = "pci"; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0 0xffe09000 0 0x1000>; |
| bus-range = <0 255>; |
| clock-frequency = <33333333>; |
| interrupt-parent = <&mpic>; |
| interrupts = <16 2>; |
| }; |
| |
| pci1: pcie@ffe0a000 { |
| compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2"; |
| device_type = "pci"; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0 0xffe0a000 0 0x1000>; |
| bus-range = <0 255>; |
| clock-frequency = <33333333>; |
| interrupt-parent = <&mpic>; |
| interrupts = <16 2>; |
| }; |
| }; |
