| /* |
| * P3041 Silicon Device Tree Source |
| * |
| * Copyright 2010-2011 Freescale Semiconductor Inc. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Freescale Semiconductor nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * |
| * ALTERNATIVELY, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") as published by the Free Software |
| * Foundation, either version 2 of that License or (at your option) any |
| * later version. |
| * |
| * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY |
| * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /dts-v1/; |
| |
| / { |
| compatible = "fsl,P3041"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| interrupt-parent = <&mpic>; |
| |
| aliases { |
| ccsr = &soc; |
| |
| serial0 = &serial0; |
| serial1 = &serial1; |
| serial2 = &serial2; |
| serial3 = &serial3; |
| pci0 = &pci0; |
| pci1 = &pci1; |
| pci2 = &pci2; |
| pci3 = &pci3; |
| usb0 = &usb0; |
| usb1 = &usb1; |
| dma0 = &dma0; |
| dma1 = &dma1; |
| sdhc = &sdhc; |
| msi0 = &msi0; |
| msi1 = &msi1; |
| msi2 = &msi2; |
| |
| crypto = &crypto; |
| sec_jr0 = &sec_jr0; |
| sec_jr1 = &sec_jr1; |
| sec_jr2 = &sec_jr2; |
| sec_jr3 = &sec_jr3; |
| rtic_a = &rtic_a; |
| rtic_b = &rtic_b; |
| rtic_c = &rtic_c; |
| rtic_d = &rtic_d; |
| sec_mon = &sec_mon; |
| |
| /* |
| rio0 = &rapidio0; |
| */ |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: PowerPC,e500mc@0 { |
| device_type = "cpu"; |
| reg = <0>; |
| next-level-cache = <&L2_0>; |
| L2_0: l2-cache { |
| next-level-cache = <&cpc>; |
| }; |
| }; |
| cpu1: PowerPC,e500mc@1 { |
| device_type = "cpu"; |
| reg = <1>; |
| next-level-cache = <&L2_1>; |
| L2_1: l2-cache { |
| next-level-cache = <&cpc>; |
| }; |
| }; |
| cpu2: PowerPC,e500mc@2 { |
| device_type = "cpu"; |
| reg = <2>; |
| next-level-cache = <&L2_2>; |
| L2_2: l2-cache { |
| next-level-cache = <&cpc>; |
| }; |
| }; |
| cpu3: PowerPC,e500mc@3 { |
| device_type = "cpu"; |
| reg = <3>; |
| next-level-cache = <&L2_3>; |
| L2_3: l2-cache { |
| next-level-cache = <&cpc>; |
| }; |
| }; |
| }; |
| |
| soc: soc@ffe000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| compatible = "simple-bus"; |
| ranges = <0x00000000 0xf 0xfe000000 0x1000000>; |
| reg = <0xf 0xfe000000 0 0x00001000>; |
| |
| soc-sram-error { |
| compatible = "fsl,soc-sram-error"; |
| interrupts = <16 2 1 29>; |
| }; |
| |
| corenet-law@0 { |
| compatible = "fsl,corenet-law"; |
| reg = <0x0 0x1000>; |
| fsl,num-laws = <32>; |
| }; |
| |
| memory-controller@8000 { |
| compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; |
| reg = <0x8000 0x1000>; |
| interrupts = <16 2 1 23>; |
| }; |
| |
| cpc: l3-cache-controller@10000 { |
| compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; |
| reg = <0x10000 0x1000>; |
| interrupts = <16 2 1 27>; |
| }; |
| |
| corenet-cf@18000 { |
| compatible = "fsl,corenet-cf"; |
| reg = <0x18000 0x1000>; |
| interrupts = <16 2 1 31>; |
| fsl,ccf-num-csdids = <32>; |
| fsl,ccf-num-snoopids = <32>; |
| }; |
| |
| iommu@20000 { |
| compatible = "fsl,pamu-v1.0", "fsl,pamu"; |
| reg = <0x20000 0x4000>; |
| interrupts = < |
| 24 2 0 0 |
| 16 2 1 30>; |
| }; |
| |
| mpic: pic@40000 { |
| clock-frequency = <0>; |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <4>; |
| reg = <0x40000 0x40000>; |
| compatible = "fsl,mpic", "chrp,open-pic"; |
| device_type = "open-pic"; |
| }; |
| |
| msi0: msi@41600 { |
| compatible = "fsl,mpic-msi"; |
| reg = <0x41600 0x200>; |
| msi-available-ranges = <0 0x100>; |
| interrupts = < |
| 0xe0 0 0 0 |
| 0xe1 0 0 0 |
| 0xe2 0 0 0 |
| 0xe3 0 0 0 |
| 0xe4 0 0 0 |
| 0xe5 0 0 0 |
| 0xe6 0 0 0 |
| 0xe7 0 0 0>; |
| }; |
| |
| msi1: msi@41800 { |
| compatible = "fsl,mpic-msi"; |
| reg = <0x41800 0x200>; |
| msi-available-ranges = <0 0x100>; |
| interrupts = < |
| 0xe8 0 0 0 |
| 0xe9 0 0 0 |
| 0xea 0 0 0 |
| 0xeb 0 0 0 |
| 0xec 0 0 0 |
| 0xed 0 0 0 |
| 0xee 0 0 0 |
| 0xef 0 0 0>; |
| }; |
| |
| msi2: msi@41a00 { |
| compatible = "fsl,mpic-msi"; |
| reg = <0x41a00 0x200>; |
| msi-available-ranges = <0 0x100>; |
| interrupts = < |
| 0xf0 0 0 0 |
| 0xf1 0 0 0 |
| 0xf2 0 0 0 |
| 0xf3 0 0 0 |
| 0xf4 0 0 0 |
| 0xf5 0 0 0 |
| 0xf6 0 0 0 |
| 0xf7 0 0 0>; |
| }; |
| |
| guts: global-utilities@e0000 { |
| compatible = "fsl,qoriq-device-config-1.0"; |
| reg = <0xe0000 0xe00>; |
| fsl,has-rstcr; |
| #sleep-cells = <1>; |
| fsl,liodn-bits = <12>; |
| }; |
| |
| pins: global-utilities@e0e00 { |
| compatible = "fsl,qoriq-pin-control-1.0"; |
| reg = <0xe0e00 0x200>; |
| #sleep-cells = <2>; |
| }; |
| |
| clockgen: global-utilities@e1000 { |
| compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0"; |
| reg = <0xe1000 0x1000>; |
| clock-frequency = <0>; |
| }; |
| |
| rcpm: global-utilities@e2000 { |
| compatible = "fsl,qoriq-rcpm-1.0"; |
| reg = <0xe2000 0x1000>; |
| #sleep-cells = <1>; |
| }; |
| |
| sfp: sfp@e8000 { |
| compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0"; |
| reg = <0xe8000 0x1000>; |
| }; |
| |
| serdes: serdes@ea000 { |
| compatible = "fsl,p3041-serdes"; |
| reg = <0xea000 0x1000>; |
| }; |
| |
| dma0: dma@100300 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,p3041-dma", "fsl,eloplus-dma"; |
| reg = <0x100300 0x4>; |
| ranges = <0x0 0x100100 0x200>; |
| cell-index = <0>; |
| dma-channel@0 { |
| compatible = "fsl,p3041-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x0 0x80>; |
| cell-index = <0>; |
| interrupts = <28 2 0 0>; |
| }; |
| dma-channel@80 { |
| compatible = "fsl,p3041-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x80 0x80>; |
| cell-index = <1>; |
| interrupts = <29 2 0 0>; |
| }; |
| dma-channel@100 { |
| compatible = "fsl,p3041-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x100 0x80>; |
| cell-index = <2>; |
| interrupts = <30 2 0 0>; |
| }; |
| dma-channel@180 { |
| compatible = "fsl,p3041-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x180 0x80>; |
| cell-index = <3>; |
| interrupts = <31 2 0 0>; |
| }; |
| }; |
| |
| dma1: dma@101300 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,p3041-dma", "fsl,eloplus-dma"; |
| reg = <0x101300 0x4>; |
| ranges = <0x0 0x101100 0x200>; |
| cell-index = <1>; |
| dma-channel@0 { |
| compatible = "fsl,p3041-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x0 0x80>; |
| cell-index = <0>; |
| interrupts = <32 2 0 0>; |
| }; |
| dma-channel@80 { |
| compatible = "fsl,p3041-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x80 0x80>; |
| cell-index = <1>; |
| interrupts = <33 2 0 0>; |
| }; |
| dma-channel@100 { |
| compatible = "fsl,p3041-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x100 0x80>; |
| cell-index = <2>; |
| interrupts = <34 2 0 0>; |
| }; |
| dma-channel@180 { |
| compatible = "fsl,p3041-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x180 0x80>; |
| cell-index = <3>; |
| interrupts = <35 2 0 0>; |
| }; |
| }; |
| |
| spi@110000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,p3041-espi", "fsl,mpc8536-espi"; |
| reg = <0x110000 0x1000>; |
| interrupts = <53 0x2 0 0>; |
| fsl,espi-num-chipselects = <4>; |
| }; |
| |
| sdhc: sdhc@114000 { |
| compatible = "fsl,p3041-esdhc", "fsl,esdhc"; |
| reg = <0x114000 0x1000>; |
| interrupts = <48 2 0 0>; |
| sdhci,auto-cmd12; |
| clock-frequency = <0>; |
| }; |
| |
| i2c@118000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <0>; |
| compatible = "fsl-i2c"; |
| reg = <0x118000 0x100>; |
| interrupts = <38 2 0 0>; |
| dfsrr; |
| }; |
| |
| i2c@118100 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <1>; |
| compatible = "fsl-i2c"; |
| reg = <0x118100 0x100>; |
| interrupts = <38 2 0 0>; |
| dfsrr; |
| }; |
| |
| i2c@119000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <2>; |
| compatible = "fsl-i2c"; |
| reg = <0x119000 0x100>; |
| interrupts = <39 2 0 0>; |
| dfsrr; |
| }; |
| |
| i2c@119100 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <3>; |
| compatible = "fsl-i2c"; |
| reg = <0x119100 0x100>; |
| interrupts = <39 2 0 0>; |
| dfsrr; |
| }; |
| |
| serial0: serial@11c500 { |
| cell-index = <0>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x11c500 0x100>; |
| clock-frequency = <0>; |
| interrupts = <36 2 0 0>; |
| }; |
| |
| serial1: serial@11c600 { |
| cell-index = <1>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x11c600 0x100>; |
| clock-frequency = <0>; |
| interrupts = <36 2 0 0>; |
| }; |
| |
| serial2: serial@11d500 { |
| cell-index = <2>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x11d500 0x100>; |
| clock-frequency = <0>; |
| interrupts = <37 2 0 0>; |
| }; |
| |
| serial3: serial@11d600 { |
| cell-index = <3>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x11d600 0x100>; |
| clock-frequency = <0>; |
| interrupts = <37 2 0 0>; |
| }; |
| |
| gpio0: gpio@130000 { |
| compatible = "fsl,p3041-gpio", "fsl,qoriq-gpio"; |
| reg = <0x130000 0x1000>; |
| interrupts = <55 2 0 0>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| }; |
| |
| usb0: usb@210000 { |
| compatible = "fsl,p3041-usb2-mph", |
| "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; |
| reg = <0x210000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <44 0x2 0 0>; |
| phy_type = "utmi"; |
| port0; |
| }; |
| |
| usb1: usb@211000 { |
| compatible = "fsl,p3041-usb2-dr", |
| "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; |
| reg = <0x211000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <45 0x2 0 0>; |
| dr_mode = "host"; |
| phy_type = "utmi"; |
| }; |
| |
| sata@220000 { |
| compatible = "fsl,p3041-sata", "fsl,pq-sata-v2"; |
| reg = <0x220000 0x1000>; |
| interrupts = <68 0x2 0 0>; |
| }; |
| |
| sata@221000 { |
| compatible = "fsl,p3041-sata", "fsl,pq-sata-v2"; |
| reg = <0x221000 0x1000>; |
| interrupts = <69 0x2 0 0>; |
| }; |
| |
| crypto: crypto@300000 { |
| compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x300000 0x10000>; |
| ranges = <0 0x300000 0x10000>; |
| interrupts = <92 2 0 0>; |
| |
| sec_jr0: jr@1000 { |
| compatible = "fsl,sec-v4.2-job-ring", |
| "fsl,sec-v4.0-job-ring"; |
| reg = <0x1000 0x1000>; |
| interrupts = <88 2 0 0>; |
| }; |
| |
| sec_jr1: jr@2000 { |
| compatible = "fsl,sec-v4.2-job-ring", |
| "fsl,sec-v4.0-job-ring"; |
| reg = <0x2000 0x1000>; |
| interrupts = <89 2 0 0>; |
| }; |
| |
| sec_jr2: jr@3000 { |
| compatible = "fsl,sec-v4.2-job-ring", |
| "fsl,sec-v4.0-job-ring"; |
| reg = <0x3000 0x1000>; |
| interrupts = <90 2 0 0>; |
| }; |
| |
| sec_jr3: jr@4000 { |
| compatible = "fsl,sec-v4.2-job-ring", |
| "fsl,sec-v4.0-job-ring"; |
| reg = <0x4000 0x1000>; |
| interrupts = <91 2 0 0>; |
| }; |
| |
| rtic@6000 { |
| compatible = "fsl,sec-v4.2-rtic", |
| "fsl,sec-v4.0-rtic"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x6000 0x100>; |
| ranges = <0x0 0x6100 0xe00>; |
| |
| rtic_a: rtic-a@0 { |
| compatible = "fsl,sec-v4.2-rtic-memory", |
| "fsl,sec-v4.0-rtic-memory"; |
| reg = <0x00 0x20 0x100 0x80>; |
| }; |
| |
| rtic_b: rtic-b@20 { |
| compatible = "fsl,sec-v4.2-rtic-memory", |
| "fsl,sec-v4.0-rtic-memory"; |
| reg = <0x20 0x20 0x200 0x80>; |
| }; |
| |
| rtic_c: rtic-c@40 { |
| compatible = "fsl,sec-v4.2-rtic-memory", |
| "fsl,sec-v4.0-rtic-memory"; |
| reg = <0x40 0x20 0x300 0x80>; |
| }; |
| |
| rtic_d: rtic-d@60 { |
| compatible = "fsl,sec-v4.2-rtic-memory", |
| "fsl,sec-v4.0-rtic-memory"; |
| reg = <0x60 0x20 0x500 0x80>; |
| }; |
| }; |
| }; |
| |
| sec_mon: sec_mon@314000 { |
| compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon"; |
| reg = <0x314000 0x1000>; |
| interrupts = <93 2 0 0>; |
| }; |
| }; |
| |
| /* |
| rapidio0: rapidio@ffe0c0000 |
| */ |
| |
| localbus@ffe124000 { |
| compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus"; |
| interrupts = <25 2 0 0>; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| }; |
| |
| pci0: pcie@ffe200000 { |
| compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; |
| device_type = "pci"; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| bus-range = <0x0 0xff>; |
| clock-frequency = <0x1fca055>; |
| fsl,msi = <&msi0>; |
| interrupts = <16 2 1 15>; |
| |
| pcie@0 { |
| reg = <0 0 0 0 0>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| interrupts = <16 2 1 15>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0 0 1 &mpic 40 1 0 0 |
| 0000 0 0 2 &mpic 1 1 0 0 |
| 0000 0 0 3 &mpic 2 1 0 0 |
| 0000 0 0 4 &mpic 3 1 0 0 |
| >; |
| }; |
| }; |
| |
| pci1: pcie@ffe201000 { |
| compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; |
| device_type = "pci"; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| bus-range = <0 0xff>; |
| clock-frequency = <0x1fca055>; |
| fsl,msi = <&msi1>; |
| interrupts = <16 2 1 14>; |
| pcie@0 { |
| reg = <0 0 0 0 0>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| interrupts = <16 2 1 14>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0 0 1 &mpic 41 1 0 0 |
| 0000 0 0 2 &mpic 5 1 0 0 |
| 0000 0 0 3 &mpic 6 1 0 0 |
| 0000 0 0 4 &mpic 7 1 0 0 |
| >; |
| }; |
| }; |
| |
| pci2: pcie@ffe202000 { |
| compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; |
| device_type = "pci"; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| bus-range = <0x0 0xff>; |
| clock-frequency = <0x1fca055>; |
| fsl,msi = <&msi2>; |
| interrupts = <16 2 1 13>; |
| pcie@0 { |
| reg = <0 0 0 0 0>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| interrupts = <16 2 1 13>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0 0 1 &mpic 42 1 0 0 |
| 0000 0 0 2 &mpic 9 1 0 0 |
| 0000 0 0 3 &mpic 10 1 0 0 |
| 0000 0 0 4 &mpic 11 1 0 0 |
| >; |
| }; |
| }; |
| |
| pci3: pcie@ffe203000 { |
| compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; |
| device_type = "pci"; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| bus-range = <0x0 0xff>; |
| clock-frequency = <0x1fca055>; |
| fsl,msi = <&msi2>; |
| interrupts = <16 2 1 12>; |
| pcie@0 { |
| reg = <0 0 0 0 0>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| interrupts = <16 2 1 12>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0 0 1 &mpic 43 1 0 0 |
| 0000 0 0 2 &mpic 0 1 0 0 |
| 0000 0 0 3 &mpic 4 1 0 0 |
| 0000 0 0 4 &mpic 8 1 0 0 |
| >; |
| }; |
| }; |
| }; |
