|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | #include <linux/delay.h> | 
|  | #include <linux/gpio/consumer.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/input.h> | 
|  | #include <linux/input/mt.h> | 
|  | #include <linux/input/touchscreen.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of_device.h> | 
|  | #include <linux/sizes.h> | 
|  | #include <linux/slab.h> | 
|  | #include <asm/unaligned.h> | 
|  |  | 
|  | #define ILI2XXX_POLL_PERIOD	20 | 
|  |  | 
|  | #define ILI210X_DATA_SIZE	64 | 
|  | #define ILI211X_DATA_SIZE	43 | 
|  | #define ILI251X_DATA_SIZE1	31 | 
|  | #define ILI251X_DATA_SIZE2	20 | 
|  |  | 
|  | /* Touchscreen commands */ | 
|  | #define REG_TOUCHDATA		0x10 | 
|  | #define REG_PANEL_INFO		0x20 | 
|  | #define REG_CALIBRATE		0xcc | 
|  |  | 
|  | struct ili2xxx_chip { | 
|  | int (*read_reg)(struct i2c_client *client, u8 reg, | 
|  | void *buf, size_t len); | 
|  | int (*get_touch_data)(struct i2c_client *client, u8 *data); | 
|  | bool (*parse_touch_data)(const u8 *data, unsigned int finger, | 
|  | unsigned int *x, unsigned int *y); | 
|  | bool (*continue_polling)(const u8 *data, bool touch); | 
|  | unsigned int max_touches; | 
|  | unsigned int resolution; | 
|  | bool has_calibrate_reg; | 
|  | }; | 
|  |  | 
|  | struct ili210x { | 
|  | struct i2c_client *client; | 
|  | struct input_dev *input; | 
|  | struct gpio_desc *reset_gpio; | 
|  | struct touchscreen_properties prop; | 
|  | const struct ili2xxx_chip *chip; | 
|  | bool stop; | 
|  | }; | 
|  |  | 
|  | static int ili210x_read_reg(struct i2c_client *client, | 
|  | u8 reg, void *buf, size_t len) | 
|  | { | 
|  | struct i2c_msg msg[] = { | 
|  | { | 
|  | .addr	= client->addr, | 
|  | .flags	= 0, | 
|  | .len	= 1, | 
|  | .buf	= ®, | 
|  | }, | 
|  | { | 
|  | .addr	= client->addr, | 
|  | .flags	= I2C_M_RD, | 
|  | .len	= len, | 
|  | .buf	= buf, | 
|  | } | 
|  | }; | 
|  | int error, ret; | 
|  |  | 
|  | ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); | 
|  | if (ret != ARRAY_SIZE(msg)) { | 
|  | error = ret < 0 ? ret : -EIO; | 
|  | dev_err(&client->dev, "%s failed: %d\n", __func__, error); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ili210x_read_touch_data(struct i2c_client *client, u8 *data) | 
|  | { | 
|  | return ili210x_read_reg(client, REG_TOUCHDATA, | 
|  | data, ILI210X_DATA_SIZE); | 
|  | } | 
|  |  | 
|  | static bool ili210x_touchdata_to_coords(const u8 *touchdata, | 
|  | unsigned int finger, | 
|  | unsigned int *x, unsigned int *y) | 
|  | { | 
|  | if (touchdata[0] & BIT(finger)) | 
|  | return false; | 
|  |  | 
|  | *x = get_unaligned_be16(touchdata + 1 + (finger * 4) + 0); | 
|  | *y = get_unaligned_be16(touchdata + 1 + (finger * 4) + 2); | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static bool ili210x_check_continue_polling(const u8 *data, bool touch) | 
|  | { | 
|  | return data[0] & 0xf3; | 
|  | } | 
|  |  | 
|  | static const struct ili2xxx_chip ili210x_chip = { | 
|  | .read_reg		= ili210x_read_reg, | 
|  | .get_touch_data		= ili210x_read_touch_data, | 
|  | .parse_touch_data	= ili210x_touchdata_to_coords, | 
|  | .continue_polling	= ili210x_check_continue_polling, | 
|  | .max_touches		= 2, | 
|  | .has_calibrate_reg	= true, | 
|  | }; | 
|  |  | 
|  | static int ili211x_read_touch_data(struct i2c_client *client, u8 *data) | 
|  | { | 
|  | s16 sum = 0; | 
|  | int error; | 
|  | int ret; | 
|  | int i; | 
|  |  | 
|  | ret = i2c_master_recv(client, data, ILI211X_DATA_SIZE); | 
|  | if (ret != ILI211X_DATA_SIZE) { | 
|  | error = ret < 0 ? ret : -EIO; | 
|  | dev_err(&client->dev, "%s failed: %d\n", __func__, error); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | /* This chip uses custom checksum at the end of data */ | 
|  | for (i = 0; i < ILI211X_DATA_SIZE - 1; i++) | 
|  | sum = (sum + data[i]) & 0xff; | 
|  |  | 
|  | if ((-sum & 0xff) != data[ILI211X_DATA_SIZE - 1]) { | 
|  | dev_err(&client->dev, | 
|  | "CRC error (crc=0x%02x expected=0x%02x)\n", | 
|  | sum, data[ILI211X_DATA_SIZE - 1]); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static bool ili211x_touchdata_to_coords(const u8 *touchdata, | 
|  | unsigned int finger, | 
|  | unsigned int *x, unsigned int *y) | 
|  | { | 
|  | u32 data; | 
|  |  | 
|  | data = get_unaligned_be32(touchdata + 1 + (finger * 4) + 0); | 
|  | if (data == 0xffffffff)	/* Finger up */ | 
|  | return false; | 
|  |  | 
|  | *x = ((touchdata[1 + (finger * 4) + 0] & 0xf0) << 4) | | 
|  | touchdata[1 + (finger * 4) + 1]; | 
|  | *y = ((touchdata[1 + (finger * 4) + 0] & 0x0f) << 8) | | 
|  | touchdata[1 + (finger * 4) + 2]; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static bool ili211x_decline_polling(const u8 *data, bool touch) | 
|  | { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static const struct ili2xxx_chip ili211x_chip = { | 
|  | .read_reg		= ili210x_read_reg, | 
|  | .get_touch_data		= ili211x_read_touch_data, | 
|  | .parse_touch_data	= ili211x_touchdata_to_coords, | 
|  | .continue_polling	= ili211x_decline_polling, | 
|  | .max_touches		= 10, | 
|  | .resolution		= 2048, | 
|  | }; | 
|  |  | 
|  | static bool ili212x_touchdata_to_coords(const u8 *touchdata, | 
|  | unsigned int finger, | 
|  | unsigned int *x, unsigned int *y) | 
|  | { | 
|  | u16 val; | 
|  |  | 
|  | val = get_unaligned_be16(touchdata + 3 + (finger * 5) + 0); | 
|  | if (!(val & BIT(15)))	/* Touch indication */ | 
|  | return false; | 
|  |  | 
|  | *x = val & 0x3fff; | 
|  | *y = get_unaligned_be16(touchdata + 3 + (finger * 5) + 2); | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static bool ili212x_check_continue_polling(const u8 *data, bool touch) | 
|  | { | 
|  | return touch; | 
|  | } | 
|  |  | 
|  | static const struct ili2xxx_chip ili212x_chip = { | 
|  | .read_reg		= ili210x_read_reg, | 
|  | .get_touch_data		= ili210x_read_touch_data, | 
|  | .parse_touch_data	= ili212x_touchdata_to_coords, | 
|  | .continue_polling	= ili212x_check_continue_polling, | 
|  | .max_touches		= 10, | 
|  | .has_calibrate_reg	= true, | 
|  | }; | 
|  |  | 
|  | static int ili251x_read_reg(struct i2c_client *client, | 
|  | u8 reg, void *buf, size_t len) | 
|  | { | 
|  | int error; | 
|  | int ret; | 
|  |  | 
|  | ret = i2c_master_send(client, ®, 1); | 
|  | if (ret == 1) { | 
|  | usleep_range(5000, 5500); | 
|  |  | 
|  | ret = i2c_master_recv(client, buf, len); | 
|  | if (ret == len) | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | error = ret < 0 ? ret : -EIO; | 
|  | dev_err(&client->dev, "%s failed: %d\n", __func__, error); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ili251x_read_touch_data(struct i2c_client *client, u8 *data) | 
|  | { | 
|  | int error; | 
|  |  | 
|  | error = ili251x_read_reg(client, REG_TOUCHDATA, | 
|  | data, ILI251X_DATA_SIZE1); | 
|  | if (!error && data[0] == 2) { | 
|  | error = i2c_master_recv(client, data + ILI251X_DATA_SIZE1, | 
|  | ILI251X_DATA_SIZE2); | 
|  | if (error >= 0 && error != ILI251X_DATA_SIZE2) | 
|  | error = -EIO; | 
|  | } | 
|  |  | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static bool ili251x_touchdata_to_coords(const u8 *touchdata, | 
|  | unsigned int finger, | 
|  | unsigned int *x, unsigned int *y) | 
|  | { | 
|  | u16 val; | 
|  |  | 
|  | val = get_unaligned_be16(touchdata + 1 + (finger * 5) + 0); | 
|  | if (!(val & BIT(15)))	/* Touch indication */ | 
|  | return false; | 
|  |  | 
|  | *x = val & 0x3fff; | 
|  | *y = get_unaligned_be16(touchdata + 1 + (finger * 5) + 2); | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static bool ili251x_check_continue_polling(const u8 *data, bool touch) | 
|  | { | 
|  | return touch; | 
|  | } | 
|  |  | 
|  | static const struct ili2xxx_chip ili251x_chip = { | 
|  | .read_reg		= ili251x_read_reg, | 
|  | .get_touch_data		= ili251x_read_touch_data, | 
|  | .parse_touch_data	= ili251x_touchdata_to_coords, | 
|  | .continue_polling	= ili251x_check_continue_polling, | 
|  | .max_touches		= 10, | 
|  | .has_calibrate_reg	= true, | 
|  | }; | 
|  |  | 
|  | static bool ili210x_report_events(struct ili210x *priv, u8 *touchdata) | 
|  | { | 
|  | struct input_dev *input = priv->input; | 
|  | int i; | 
|  | bool contact = false, touch; | 
|  | unsigned int x = 0, y = 0; | 
|  |  | 
|  | for (i = 0; i < priv->chip->max_touches; i++) { | 
|  | touch = priv->chip->parse_touch_data(touchdata, i, &x, &y); | 
|  |  | 
|  | input_mt_slot(input, i); | 
|  | if (input_mt_report_slot_state(input, MT_TOOL_FINGER, touch)) { | 
|  | touchscreen_report_pos(input, &priv->prop, x, y, true); | 
|  | contact = true; | 
|  | } | 
|  | } | 
|  |  | 
|  | input_mt_report_pointer_emulation(input, false); | 
|  | input_sync(input); | 
|  |  | 
|  | return contact; | 
|  | } | 
|  |  | 
|  | static irqreturn_t ili210x_irq(int irq, void *irq_data) | 
|  | { | 
|  | struct ili210x *priv = irq_data; | 
|  | struct i2c_client *client = priv->client; | 
|  | const struct ili2xxx_chip *chip = priv->chip; | 
|  | u8 touchdata[ILI210X_DATA_SIZE] = { 0 }; | 
|  | bool keep_polling; | 
|  | bool touch; | 
|  | int error; | 
|  |  | 
|  | do { | 
|  | error = chip->get_touch_data(client, touchdata); | 
|  | if (error) { | 
|  | dev_err(&client->dev, | 
|  | "Unable to get touch data: %d\n", error); | 
|  | break; | 
|  | } | 
|  |  | 
|  | touch = ili210x_report_events(priv, touchdata); | 
|  | keep_polling = chip->continue_polling(touchdata, touch); | 
|  | if (keep_polling) | 
|  | msleep(ILI2XXX_POLL_PERIOD); | 
|  | } while (!priv->stop && keep_polling); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static ssize_t ili210x_calibrate(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct ili210x *priv = i2c_get_clientdata(client); | 
|  | unsigned long calibrate; | 
|  | int rc; | 
|  | u8 cmd = REG_CALIBRATE; | 
|  |  | 
|  | if (kstrtoul(buf, 10, &calibrate)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (calibrate > 1) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (calibrate) { | 
|  | rc = i2c_master_send(priv->client, &cmd, sizeof(cmd)); | 
|  | if (rc != sizeof(cmd)) | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | return count; | 
|  | } | 
|  | static DEVICE_ATTR(calibrate, S_IWUSR, NULL, ili210x_calibrate); | 
|  |  | 
|  | static struct attribute *ili210x_attributes[] = { | 
|  | &dev_attr_calibrate.attr, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | static umode_t ili210x_calibrate_visible(struct kobject *kobj, | 
|  | struct attribute *attr, int index) | 
|  | { | 
|  | struct device *dev = kobj_to_dev(kobj); | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct ili210x *priv = i2c_get_clientdata(client); | 
|  |  | 
|  | return priv->chip->has_calibrate_reg ? attr->mode : 0; | 
|  | } | 
|  |  | 
|  | static const struct attribute_group ili210x_attr_group = { | 
|  | .attrs = ili210x_attributes, | 
|  | .is_visible = ili210x_calibrate_visible, | 
|  | }; | 
|  |  | 
|  | static void ili210x_power_down(void *data) | 
|  | { | 
|  | struct gpio_desc *reset_gpio = data; | 
|  |  | 
|  | gpiod_set_value_cansleep(reset_gpio, 1); | 
|  | } | 
|  |  | 
|  | static void ili210x_stop(void *data) | 
|  | { | 
|  | struct ili210x *priv = data; | 
|  |  | 
|  | /* Tell ISR to quit even if there is a contact. */ | 
|  | priv->stop = true; | 
|  | } | 
|  |  | 
|  | static int ili210x_i2c_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct device *dev = &client->dev; | 
|  | const struct ili2xxx_chip *chip; | 
|  | struct ili210x *priv; | 
|  | struct gpio_desc *reset_gpio; | 
|  | struct input_dev *input; | 
|  | int error; | 
|  | unsigned int max_xy; | 
|  |  | 
|  | dev_dbg(dev, "Probing for ILI210X I2C Touschreen driver"); | 
|  |  | 
|  | chip = device_get_match_data(dev); | 
|  | if (!chip && id) | 
|  | chip = (const struct ili2xxx_chip *)id->driver_data; | 
|  | if (!chip) { | 
|  | dev_err(&client->dev, "unknown device model\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | if (client->irq <= 0) { | 
|  | dev_err(dev, "No IRQ!\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); | 
|  | if (IS_ERR(reset_gpio)) | 
|  | return PTR_ERR(reset_gpio); | 
|  |  | 
|  | if (reset_gpio) { | 
|  | error = devm_add_action_or_reset(dev, ili210x_power_down, | 
|  | reset_gpio); | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | usleep_range(50, 100); | 
|  | gpiod_set_value_cansleep(reset_gpio, 0); | 
|  | msleep(100); | 
|  | } | 
|  |  | 
|  | priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); | 
|  | if (!priv) | 
|  | return -ENOMEM; | 
|  |  | 
|  | input = devm_input_allocate_device(dev); | 
|  | if (!input) | 
|  | return -ENOMEM; | 
|  |  | 
|  | priv->client = client; | 
|  | priv->input = input; | 
|  | priv->reset_gpio = reset_gpio; | 
|  | priv->chip = chip; | 
|  | i2c_set_clientdata(client, priv); | 
|  |  | 
|  | /* Setup input device */ | 
|  | input->name = "ILI210x Touchscreen"; | 
|  | input->id.bustype = BUS_I2C; | 
|  |  | 
|  | /* Multi touch */ | 
|  | max_xy = (chip->resolution ?: SZ_64K) - 1; | 
|  | input_set_abs_params(input, ABS_MT_POSITION_X, 0, max_xy, 0, 0); | 
|  | input_set_abs_params(input, ABS_MT_POSITION_Y, 0, max_xy, 0, 0); | 
|  | touchscreen_parse_properties(input, true, &priv->prop); | 
|  |  | 
|  | error = input_mt_init_slots(input, priv->chip->max_touches, | 
|  | INPUT_MT_DIRECT); | 
|  | if (error) { | 
|  | dev_err(dev, "Unable to set up slots, err: %d\n", error); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | error = devm_request_threaded_irq(dev, client->irq, NULL, ili210x_irq, | 
|  | IRQF_ONESHOT, client->name, priv); | 
|  | if (error) { | 
|  | dev_err(dev, "Unable to request touchscreen IRQ, err: %d\n", | 
|  | error); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | error = devm_add_action_or_reset(dev, ili210x_stop, priv); | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | error = devm_device_add_group(dev, &ili210x_attr_group); | 
|  | if (error) { | 
|  | dev_err(dev, "Unable to create sysfs attributes, err: %d\n", | 
|  | error); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | error = input_register_device(priv->input); | 
|  | if (error) { | 
|  | dev_err(dev, "Cannot register input device, err: %d\n", error); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id ili210x_i2c_id[] = { | 
|  | { "ili210x", (long)&ili210x_chip }, | 
|  | { "ili2117", (long)&ili211x_chip }, | 
|  | { "ili2120", (long)&ili212x_chip }, | 
|  | { "ili251x", (long)&ili251x_chip }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, ili210x_i2c_id); | 
|  |  | 
|  | static const struct of_device_id ili210x_dt_ids[] = { | 
|  | { .compatible = "ilitek,ili210x", .data = &ili210x_chip }, | 
|  | { .compatible = "ilitek,ili2117", .data = &ili211x_chip }, | 
|  | { .compatible = "ilitek,ili2120", .data = &ili212x_chip }, | 
|  | { .compatible = "ilitek,ili251x", .data = &ili251x_chip }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, ili210x_dt_ids); | 
|  |  | 
|  | static struct i2c_driver ili210x_ts_driver = { | 
|  | .driver = { | 
|  | .name = "ili210x_i2c", | 
|  | .of_match_table = ili210x_dt_ids, | 
|  | }, | 
|  | .id_table = ili210x_i2c_id, | 
|  | .probe = ili210x_i2c_probe, | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(ili210x_ts_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Olivier Sobrie <olivier@sobrie.be>"); | 
|  | MODULE_DESCRIPTION("ILI210X I2C Touchscreen Driver"); | 
|  | MODULE_LICENSE("GPL"); |