blob: 0744731c62291c7bcb4ec83ac04b468a179fac37 [file] [log] [blame]
/*
* Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __TEGRA_CLK_H
#define __TEGRA_CLK_H
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
/**
* struct tegra_clk_sync_source - external clock source from codec
*
* @hw: handle between common and hardware-specific interfaces
* @rate: input frequency from source
* @max_rate: max rate allowed
*/
struct tegra_clk_sync_source {
struct clk_hw hw;
unsigned long rate;
unsigned long max_rate;
};
#define to_clk_sync_source(_hw) \
container_of(_hw, struct tegra_clk_sync_source, hw)
extern const struct clk_ops tegra_clk_sync_source_ops;
struct clk *tegra_clk_register_sync_source(const char *name,
unsigned long fixed_rate, unsigned long max_rate);
/**
* struct tegra_clk_frac_div - fractional divider clock
*
* @hw: handle between common and hardware-specific interfaces
* @reg: register containing divider
* @flags: hardware-specific flags
* @shift: shift to the divider bit field
* @width: width of the divider bit field
* @frac_width: width of the fractional bit field
* @lock: register lock
*
* Flags:
* TEGRA_DIVIDER_ROUND_UP - This flags indicates to round up the divider value.
* TEGRA_DIVIDER_FIXED - Fixed rate PLL dividers has addition override bit, this
* flag indicates that this divider is for fixed rate PLL.
* TEGRA_DIVIDER_INT - Some modules can not cope with the duty cycle when
* fraction bit is set. This flags indicates to calculate divider for which
* fracton bit will be zero.
* TEGRA_DIVIDER_UART - UART module divider has additional enable bit which is
* set when divider value is not 0. This flags indicates that the divider
* is for UART module.
*/
struct tegra_clk_frac_div {
struct clk_hw hw;
void __iomem *reg;
u8 flags;
u8 shift;
u8 width;
u8 frac_width;
spinlock_t *lock;
};
#define to_clk_frac_div(_hw) container_of(_hw, struct tegra_clk_frac_div, hw)
#define TEGRA_DIVIDER_ROUND_UP BIT(0)
#define TEGRA_DIVIDER_FIXED BIT(1)
#define TEGRA_DIVIDER_INT BIT(2)
#define TEGRA_DIVIDER_UART BIT(3)
extern const struct clk_ops tegra_clk_frac_div_ops;
struct clk *tegra_clk_register_divider(const char *name,
const char *parent_name, void __iomem *reg,
unsigned long flags, u8 clk_divider_flags, u8 shift, u8 width,
u8 frac_width, spinlock_t *lock);
/*
* Tegra PLL:
*
* In general, there are 3 requirements for each PLL
* that SW needs to be comply with.
* (1) Input frequency range (REF).
* (2) Comparison frequency range (CF). CF = REF/DIVM.
* (3) VCO frequency range (VCO). VCO = CF * DIVN.
*
* The final PLL output frequency (FO) = VCO >> DIVP.
*/
/**
* struct tegra_clk_pll_freq_table - PLL frequecy table
*
* @input_rate: input rate from source
* @output_rate: output rate from PLL for the input rate
* @n: feedback divider
* @m: input divider
* @p: post divider
* @cpcon: charge pump current
*/
struct tegra_clk_pll_freq_table {
unsigned long input_rate;
unsigned long output_rate;
u16 n;
u16 m;
u8 p;
u8 cpcon;
};
/**
* struct clk_pll_params - PLL parameters
*
* @input_min: Minimum input frequency
* @input_max: Maximum input frequency
* @cf_min: Minimum comparison frequency
* @cf_max: Maximum comparison frequency
* @vco_min: Minimum VCO frequency
* @vco_max: Maximum VCO frequency
* @base_reg: PLL base reg offset
* @misc_reg: PLL misc reg offset
* @lock_reg: PLL lock reg offset
* @lock_bit_idx: Bit index for PLL lock status
* @lock_enable_bit_idx: Bit index to enable PLL lock
* @lock_delay: Delay in us if PLL lock is not used
*/
struct tegra_clk_pll_params {
unsigned long input_min;
unsigned long input_max;
unsigned long cf_min;
unsigned long cf_max;
unsigned long vco_min;
unsigned long vco_max;
u32 base_reg;
u32 misc_reg;
u32 lock_reg;
u32 lock_bit_idx;
u32 lock_enable_bit_idx;
int lock_delay;
};
/**
* struct tegra_clk_pll - Tegra PLL clock
*
* @hw: handle between common and hardware-specifix interfaces
* @clk_base: address of CAR controller
* @pmc: address of PMC, required to read override bits
* @freq_table: array of frequencies supported by PLL
* @params: PLL parameters
* @flags: PLL flags
* @fixed_rate: PLL rate if it is fixed
* @lock: register lock
* @divn_shift: shift to the feedback divider bit field
* @divn_width: width of the feedback divider bit field
* @divm_shift: shift to the input divider bit field
* @divm_width: width of the input divider bit field
* @divp_shift: shift to the post divider bit field
* @divp_width: width of the post divider bit field
*
* Flags:
* TEGRA_PLL_USE_LOCK - This flag indicated to use lock bits for
* PLL locking. If not set it will use lock_delay value to wait.
* TEGRA_PLL_HAS_CPCON - This flag indicates that CPCON value needs
* to be programmed to change output frequency of the PLL.
* TEGRA_PLL_SET_LFCON - This flag indicates that LFCON value needs
* to be programmed to change output frequency of the PLL.
* TEGRA_PLL_SET_DCCON - This flag indicates that DCCON value needs
* to be programmed to change output frequency of the PLL.
* TEGRA_PLLU - PLLU has inverted post divider. This flags indicated
* that it is PLLU and invert post divider value.
* TEGRA_PLLM - PLLM has additional override settings in PMC. This
* flag indicates that it is PLLM and use override settings.
* TEGRA_PLL_FIXED - We are not supposed to change output frequency
* of some plls.
* TEGRA_PLLE_CONFIGURE - Configure PLLE when enabling.
*/
struct tegra_clk_pll {
struct clk_hw hw;
void __iomem *clk_base;
void __iomem *pmc;
u8 flags;
unsigned long fixed_rate;
spinlock_t *lock;
u8 divn_shift;
u8 divn_width;
u8 divm_shift;
u8 divm_width;
u8 divp_shift;
u8 divp_width;
struct tegra_clk_pll_freq_table *freq_table;
struct tegra_clk_pll_params *params;
};
#define to_clk_pll(_hw) container_of(_hw, struct tegra_clk_pll, hw)
#define TEGRA_PLL_USE_LOCK BIT(0)
#define TEGRA_PLL_HAS_CPCON BIT(1)
#define TEGRA_PLL_SET_LFCON BIT(2)
#define TEGRA_PLL_SET_DCCON BIT(3)
#define TEGRA_PLLU BIT(4)
#define TEGRA_PLLM BIT(5)
#define TEGRA_PLL_FIXED BIT(6)
#define TEGRA_PLLE_CONFIGURE BIT(7)
extern const struct clk_ops tegra_clk_pll_ops;
extern const struct clk_ops tegra_clk_plle_ops;
struct clk *tegra_clk_register_pll(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
unsigned long flags, unsigned long fixed_rate,
struct tegra_clk_pll_params *pll_params, u8 pll_flags,
struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock);
struct clk *tegra_clk_register_plle(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
unsigned long flags, unsigned long fixed_rate,
struct tegra_clk_pll_params *pll_params, u8 pll_flags,
struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock);
/**
* struct tegra_clk_pll_out - PLL divider down clock
*
* @hw: handle between common and hardware-specific interfaces
* @reg: register containing the PLL divider
* @enb_bit_idx: bit to enable/disable PLL divider
* @rst_bit_idx: bit to reset PLL divider
* @lock: register lock
* @flags: hardware-specific flags
*/
struct tegra_clk_pll_out {
struct clk_hw hw;
void __iomem *reg;
u8 enb_bit_idx;
u8 rst_bit_idx;
spinlock_t *lock;
u8 flags;
};
#define to_clk_pll_out(_hw) container_of(_hw, struct tegra_clk_pll_out, hw)
extern const struct clk_ops tegra_clk_pll_out_ops;
struct clk *tegra_clk_register_pll_out(const char *name,
const char *parent_name, void __iomem *reg, u8 enb_bit_idx,
u8 rst_bit_idx, unsigned long flags, u8 pll_div_flags,
spinlock_t *lock);
/**
* struct tegra_clk_periph_regs - Registers controlling peripheral clock
*
* @enb_reg: read the enable status
* @enb_set_reg: write 1 to enable clock
* @enb_clr_reg: write 1 to disable clock
* @rst_reg: read the reset status
* @rst_set_reg: write 1 to assert the reset of peripheral
* @rst_clr_reg: write 1 to deassert the reset of peripheral
*/
struct tegra_clk_periph_regs {
u32 enb_reg;
u32 enb_set_reg;
u32 enb_clr_reg;
u32 rst_reg;
u32 rst_set_reg;
u32 rst_clr_reg;
};
/**
* struct tegra_clk_periph_gate - peripheral gate clock
*
* @magic: magic number to validate type
* @hw: handle between common and hardware-specific interfaces
* @clk_base: address of CAR controller
* @regs: Registers to control the peripheral
* @flags: hardware-specific flags
* @clk_num: Clock number
* @enable_refcnt: array to maintain reference count of the clock
*
* Flags:
* TEGRA_PERIPH_NO_RESET - This flag indicates that reset is not allowed
* for this module.
* TEGRA_PERIPH_MANUAL_RESET - This flag indicates not to reset module
* after clock enable and driver for the module is responsible for
* doing reset.
* TEGRA_PERIPH_ON_APB - If peripheral is in the APB bus then read the
* bus to flush the write operation in apb bus. This flag indicates
* that this peripheral is in apb bus.
*/
struct tegra_clk_periph_gate {
u32 magic;
struct clk_hw hw;
void __iomem *clk_base;
u8 flags;
int clk_num;
int *enable_refcnt;
struct tegra_clk_periph_regs *regs;
};
#define to_clk_periph_gate(_hw) \
container_of(_hw, struct tegra_clk_periph_gate, hw)
#define TEGRA_CLK_PERIPH_GATE_MAGIC 0x17760309
#define TEGRA_PERIPH_NO_RESET BIT(0)
#define TEGRA_PERIPH_MANUAL_RESET BIT(1)
#define TEGRA_PERIPH_ON_APB BIT(2)
void tegra_periph_reset(struct tegra_clk_periph_gate *gate, bool assert);
extern const struct clk_ops tegra_clk_periph_gate_ops;
struct clk *tegra_clk_register_periph_gate(const char *name,
const char *parent_name, u8 gate_flags, void __iomem *clk_base,
unsigned long flags, int clk_num,
struct tegra_clk_periph_regs *pregs, int *enable_refcnt);
/**
* struct clk-periph - peripheral clock
*
* @magic: magic number to validate type
* @hw: handle between common and hardware-specific interfaces
* @mux: mux clock
* @divider: divider clock
* @gate: gate clock
* @mux_ops: mux clock ops
* @div_ops: divider clock ops
* @gate_ops: gate clock ops
*/
struct tegra_clk_periph {
u32 magic;
struct clk_hw hw;
struct clk_mux mux;
struct tegra_clk_frac_div divider;
struct tegra_clk_periph_gate gate;
const struct clk_ops *mux_ops;
const struct clk_ops *div_ops;
const struct clk_ops *gate_ops;
};
#define to_clk_periph(_hw) container_of(_hw, struct tegra_clk_periph, hw)
#define TEGRA_CLK_PERIPH_MAGIC 0x18221223
extern const struct clk_ops tegra_clk_periph_ops;
struct clk *tegra_clk_register_periph(const char *name,
const char **parent_names, int num_parents,
struct tegra_clk_periph *periph, void __iomem *clk_base,
u32 offset);
struct clk *tegra_clk_register_periph_nodiv(const char *name,
const char **parent_names, int num_parents,
struct tegra_clk_periph *periph, void __iomem *clk_base,
u32 offset);
#define TEGRA_CLK_PERIPH(_mux_shift, _mux_width, _mux_flags, \
_div_shift, _div_width, _div_frac_width, \
_div_flags, _clk_num, _enb_refcnt, _regs, \
_gate_flags) \
{ \
.mux = { \
.flags = _mux_flags, \
.shift = _mux_shift, \
.width = _mux_width, \
}, \
.divider = { \
.flags = _div_flags, \
.shift = _div_shift, \
.width = _div_width, \
.frac_width = _div_frac_width, \
}, \
.gate = { \
.flags = _gate_flags, \
.clk_num = _clk_num, \
.enable_refcnt = _enb_refcnt, \
.regs = _regs, \
}, \
.mux_ops = &clk_mux_ops, \
.div_ops = &tegra_clk_frac_div_ops, \
.gate_ops = &tegra_clk_periph_gate_ops, \
}
struct tegra_periph_init_data {
const char *name;
int clk_id;
const char **parent_names;
int num_parents;
struct tegra_clk_periph periph;
u32 offset;
const char *con_id;
const char *dev_id;
};
#define TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parent_names, _offset, \
_mux_shift, _mux_width, _mux_flags, _div_shift, \
_div_width, _div_frac_width, _div_flags, _regs, \
_clk_num, _enb_refcnt, _gate_flags, _clk_id) \
{ \
.name = _name, \
.clk_id = _clk_id, \
.parent_names = _parent_names, \
.num_parents = ARRAY_SIZE(_parent_names), \
.periph = TEGRA_CLK_PERIPH(_mux_shift, _mux_width, \
_mux_flags, _div_shift, \
_div_width, _div_frac_width, \
_div_flags, _clk_num, \
_enb_refcnt, _regs, \
_gate_flags), \
.offset = _offset, \
.con_id = _con_id, \
.dev_id = _dev_id, \
}
/**
* struct clk_super_mux - super clock
*
* @hw: handle between common and hardware-specific interfaces
* @reg: register controlling multiplexer
* @width: width of the multiplexer bit field
* @flags: hardware-specific flags
* @div2_index: bit controlling divide-by-2
* @pllx_index: PLLX index in the parent list
* @lock: register lock
*
* Flags:
* TEGRA_DIVIDER_2 - LP cluster has additional divider. This flag indicates
* that this is LP cluster clock.
*/
struct tegra_clk_super_mux {
struct clk_hw hw;
void __iomem *reg;
u8 width;
u8 flags;
u8 div2_index;
u8 pllx_index;
spinlock_t *lock;
};
#define to_clk_super_mux(_hw) container_of(_hw, struct tegra_clk_super_mux, hw)
#define TEGRA_DIVIDER_2 BIT(0)
extern const struct clk_ops tegra_clk_super_ops;
struct clk *tegra_clk_register_super_mux(const char *name,
const char **parent_names, u8 num_parents,
unsigned long flags, void __iomem *reg, u8 clk_super_flags,
u8 width, u8 pllx_index, u8 div2_index, spinlock_t *lock);
/**
* struct clk_init_tabel - clock initialization table
* @clk_id: clock id as mentioned in device tree bindings
* @parent_id: parent clock id as mentioned in device tree bindings
* @rate: rate to set
* @state: enable/disable
*/
struct tegra_clk_init_table {
unsigned int clk_id;
unsigned int parent_id;
unsigned long rate;
int state;
};
/**
* struct clk_duplicate - duplicate clocks
* @clk_id: clock id as mentioned in device tree bindings
* @lookup: duplicate lookup entry for the clock
*/
struct tegra_clk_duplicate {
int clk_id;
struct clk_lookup lookup;
};
#define TEGRA_CLK_DUPLICATE(_clk_id, _dev, _con) \
{ \
.clk_id = _clk_id, \
.lookup = { \
.dev_id = _dev, \
.con_id = _con, \
}, \
}
void tegra_init_from_table(struct tegra_clk_init_table *tbl,
struct clk *clks[], int clk_max);
void tegra_init_dup_clks(struct tegra_clk_duplicate *dup_list,
struct clk *clks[], int clk_max);
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
void tegra20_clock_init(struct device_node *np);
#else
static inline void tegra20_clock_init(struct device_node *np) {}
#endif /* CONFIG_ARCH_TEGRA_2x_SOC */
#ifdef CONFIG_ARCH_TEGRA_3x_SOC
void tegra30_clock_init(struct device_node *np);
#else
static inline void tegra30_clock_init(struct device_node *np) {}
#endif /* CONFIG_ARCH_TEGRA_3x_SOC */
#endif /* TEGRA_CLK_H */