blob: 20578536aec74bf83af3815cccb734e2c0cc7a88 [file] [log] [blame]
# Copyright 2008 Openmoko, Inc.
# Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
#
# Licensed under GPLv2
# temporary until we can eliminate all drivers using it.
config PLAT_S3C64XX
bool
depends on ARCH_S3C64XX
default y
select PM_GENERIC_DOMAINS
select SAMSUNG_WAKEMASK
help
Base platform code for any Samsung S3C64XX device
# Configuration options for the S3C6410 CPU
config CPU_S3C6400
select SAMSUNG_HRT
bool
help
Enable S3C6400 CPU support
config CPU_S3C6410
select SAMSUNG_HRT
bool
help
Enable S3C6410 CPU support
config S3C64XX_DMA
bool "S3C64XX DMA"
select S3C_DMA
config S3C64XX_SETUP_SDHCI
bool
select S3C64XX_SETUP_SDHCI_GPIO
help
Internal configuration for default SDHCI setup for S3C6400 and
S3C6410 SoCs.
config S3C64XX_DEV_ONENAND1
bool
help
Compile in platform device definition for OneNAND1 controller
# platform specific device setup
config S3C64XX_SETUP_I2C0
bool
default y
help
Common setup code for i2c bus 0.
Note, currently since i2c0 is always compiled, this setup helper
is always compiled with it.
config S3C64XX_SETUP_I2C1
bool
help
Common setup code for i2c bus 1.
config S3C64XX_SETUP_IDE
bool
help
Common setup code for S3C64XX IDE.
config S3C64XX_SETUP_FB_24BPP
bool
help
Common setup code for S3C64XX with an 24bpp RGB display helper.
config S3C64XX_SETUP_KEYPAD
bool
help
Common setup code for S3C64XX KEYPAD GPIO configurations
config S3C64XX_SETUP_SDHCI_GPIO
bool
help
Common setup code for S3C64XX SDHCI GPIO configurations
config S3C64XX_SETUP_SPI
bool
help
Common setup code for SPI GPIO configurations
config S3C64XX_SETUP_USB_PHY
bool
help
Common setup code for USB PHY controller
# S36400 Macchine support
config MACH_SMDK6400
bool "SMDK6400"
select CPU_S3C6400
select S3C64XX_SETUP_SDHCI
select S3C_DEV_HSMMC
select S3C_DEV_NAND
help
Machine support for the Samsung SMDK6400
# S3C6410 machine support
config MACH_ANW6410
bool "A&W6410"
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C_DEV_FB
help
Machine support for the A&W6410
config MACH_MINI6410
bool "MINI6410"
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_SDHCI
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_TS
help
Machine support for the FriendlyARM MINI6410
config MACH_REAL6410
bool "REAL6410"
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_SDHCI
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_TS
help
Machine support for the CoreWind REAL6410
config MACH_SMDK6410
bool "SMDK6410"
select CPU_S3C6410
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_I2C1
select S3C64XX_SETUP_IDE
select S3C64XX_SETUP_KEYPAD
select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_USB_PHY
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_USB_HOST
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_IDE
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
help
Machine support for the Samsung SMDK6410
# At least some of the SMDK6410s were shipped with the card detect
# for the MMC/SD slots connected to the same input. This means that
# either the boards need to be altered to have channel0 to an alternate
# configuration or that only one slot can be used.
choice
prompt "SMDK6410 MMC/SD slot setup"
depends on MACH_SMDK6410
config SMDK6410_SD_CH0
bool "Use channel 0 only"
depends on MACH_SMDK6410
help
Select CON7 (channel 0) as the MMC/SD slot, as
at least some SMDK6410 boards come with the
resistors fitted so that the card detects for
channels 0 and 1 are the same.
config SMDK6410_SD_CH1
bool "Use channel 1 only"
depends on MACH_SMDK6410
help
Select CON6 (channel 1) as the MMC/SD slot, as
at least some SMDK6410 boards come with the
resistors fitted so that the card detects for
channels 0 and 1 are the same.
endchoice
config SMDK6410_WM1190_EV1
bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
depends on MACH_SMDK6410
select MFD_WM8350_I2C
select REGULATOR
select REGULATOR_WM8350
select SAMSUNG_GPIO_EXTRA64
help
The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
and audio daughtercard for the Samsung SMDK6410 reference
platform. Enabling this option will build support for this
module into the kernel. The presence of the module will be
detected at runtime so the resulting kernel can be used
with or without the 1190-EV1 fitted.
config SMDK6410_WM1192_EV1
bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
depends on MACH_SMDK6410
select MFD_WM831X
select MFD_WM831X_I2C
select REGULATOR
select REGULATOR_WM831X
select SAMSUNG_GPIO_EXTRA64
help
The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
daughtercard for the Samsung SMDK6410 reference platform.
Enabling this option will build support for this module into
the kernel. The presence of the daughtercard will be
detected at runtime so the resulting kernel can be used
with or without the 1192-EV1 fitted.
config MACH_NCP
bool "NCP"
select CPU_S3C6410
select S3C64XX_SETUP_I2C1
select S3C_DEV_HSMMC1
select S3C_DEV_I2C1
help
Machine support for the Samsung NCP
config MACH_HMT
bool "Airgoo HMT"
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C_DEV_FB
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
select SAMSUNG_DEV_PWM
help
Machine support for the Airgoo HMT
config MACH_SMARTQ
bool
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_USB_PHY
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_HWMON
select S3C_DEV_RTC
select S3C_DEV_USB_HOST
select S3C_DEV_USB_HSOTG
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
help
Shared machine support for SmartQ 5/7
config MACH_SMARTQ5
bool "SmartQ 5"
select MACH_SMARTQ
help
Machine support for the SmartQ 5
config MACH_SMARTQ7
bool "SmartQ 7"
select MACH_SMARTQ
help
Machine support for the SmartQ 7
config MACH_WLF_CRAGG_6410
bool "Wolfson Cragganmore 6410"
select CPU_S3C6410
select I2C
select LEDS_GPIO_REGISTER
select S3C64XX_DEV_SPI0
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_I2C1
select S3C64XX_SETUP_IDE
select S3C64XX_SETUP_KEYPAD
select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_SPI
select S3C64XX_SETUP_USB_PHY
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_USB_HOST
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
select SAMSUNG_GPIO_EXTRA128
help
Machine support for the Wolfson Cragganmore S3C6410 variant.