blob: dffa6ff303608b19bf27a0ca34f96f2370d2500f [file] [log] [blame]
/*
* Reference Device Tree Source for the Bock-W board
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
*
* based on r8a7779
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Simon Horman
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/dts-v1/;
#include "r8a7778.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
/ {
model = "bockw";
compatible = "renesas,bockw-reference", "renesas,r8a7778";
aliases {
serial0 = &scif0;
};
chosen {
bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw";
stdout-path = &scif0;
};
memory {
device_type = "memory";
reg = <0x60000000 0x10000000>;
};
fixedregulator3v3: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ethernet@18300000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0x18300000 0x1000>;
phy-mode = "mii";
interrupt-parent = <&irqpin>;
interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
reg-io-width = <4>;
vddvario-supply = <&fixedregulator3v3>;
vdd33a-supply = <&fixedregulator3v3>;
};
};
&mmcif {
pinctrl-0 = <&mmc_pins>;
pinctrl-names = "default";
vmmc-supply = <&fixedregulator3v3>;
bus-width = <8>;
broken-cd;
status = "okay";
};
&irqpin {
status = "okay";
};
&tmu0 {
status = "okay";
};
&pfc {
scif0_pins: serial0 {
renesas,groups = "scif0_data_a", "scif0_ctrl";
renesas,function = "scif0";
};
mmc_pins: mmc {
renesas,groups = "mmc_data8", "mmc_ctrl";
renesas,function = "mmc";
};
sdhi0_pins: sd0 {
renesas,groups = "sdhi0_data4", "sdhi0_ctrl",
"sdhi0_cd";
renesas,function = "sdhi0";
};
hspi0_pins: hspi0 {
renesas,groups = "hspi0_a";
renesas,function = "hspi0";
};
};
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
pinctrl-names = "default";
vmmc-supply = <&fixedregulator3v3>;
bus-width = <4>;
status = "okay";
wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
};
&hspi0 {
pinctrl-0 = <&hspi0_pins>;
pinctrl-names = "default";
status = "okay";
flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25fl008k", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <104000000>;
m25p,fast-read;
partition@0 {
label = "data(spi)";
reg = <0x00000000 0x00100000>;
};
};
};
&scif0 {
pinctrl-0 = <&scif0_pins>;
pinctrl-names = "default";
status = "okay";
};