|  | /* | 
|  | * drivers/media/i2c/adp1653.c | 
|  | * | 
|  | * Copyright (C) 2008--2011 Nokia Corporation | 
|  | * | 
|  | * Contact: Sakari Ailus <sakari.ailus@iki.fi> | 
|  | * | 
|  | * Contributors: | 
|  | *	Sakari Ailus <sakari.ailus@iki.fi> | 
|  | *	Tuukka Toivonen <tuukkat76@gmail.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * version 2 as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but | 
|  | * WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | 
|  | * 02110-1301 USA | 
|  | * | 
|  | * TODO: | 
|  | * - fault interrupt handling | 
|  | * - hardware strobe | 
|  | * - power doesn't need to be ON if all lights are off | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/delay.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/slab.h> | 
|  | #include <media/adp1653.h> | 
|  | #include <media/v4l2-device.h> | 
|  |  | 
|  | #define TIMEOUT_MAX		820000 | 
|  | #define TIMEOUT_STEP		54600 | 
|  | #define TIMEOUT_MIN		(TIMEOUT_MAX - ADP1653_REG_CONFIG_TMR_SET_MAX \ | 
|  | * TIMEOUT_STEP) | 
|  | #define TIMEOUT_US_TO_CODE(t)	((TIMEOUT_MAX + (TIMEOUT_STEP / 2) - (t)) \ | 
|  | / TIMEOUT_STEP) | 
|  | #define TIMEOUT_CODE_TO_US(c)	(TIMEOUT_MAX - (c) * TIMEOUT_STEP) | 
|  |  | 
|  | /* Write values into ADP1653 registers. */ | 
|  | static int adp1653_update_hw(struct adp1653_flash *flash) | 
|  | { | 
|  | struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); | 
|  | u8 out_sel; | 
|  | u8 config = 0; | 
|  | int rval; | 
|  |  | 
|  | out_sel = ADP1653_INDICATOR_INTENSITY_uA_TO_REG( | 
|  | flash->indicator_intensity->val) | 
|  | << ADP1653_REG_OUT_SEL_ILED_SHIFT; | 
|  |  | 
|  | switch (flash->led_mode->val) { | 
|  | case V4L2_FLASH_LED_MODE_NONE: | 
|  | break; | 
|  | case V4L2_FLASH_LED_MODE_FLASH: | 
|  | /* Flash mode, light on with strobe, duration from timer */ | 
|  | config = ADP1653_REG_CONFIG_TMR_CFG; | 
|  | config |= TIMEOUT_US_TO_CODE(flash->flash_timeout->val) | 
|  | << ADP1653_REG_CONFIG_TMR_SET_SHIFT; | 
|  | break; | 
|  | case V4L2_FLASH_LED_MODE_TORCH: | 
|  | /* Torch mode, light immediately on, duration indefinite */ | 
|  | out_sel |= ADP1653_FLASH_INTENSITY_mA_TO_REG( | 
|  | flash->torch_intensity->val) | 
|  | << ADP1653_REG_OUT_SEL_HPLED_SHIFT; | 
|  | break; | 
|  | } | 
|  |  | 
|  | rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, out_sel); | 
|  | if (rval < 0) | 
|  | return rval; | 
|  |  | 
|  | rval = i2c_smbus_write_byte_data(client, ADP1653_REG_CONFIG, config); | 
|  | if (rval < 0) | 
|  | return rval; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int adp1653_get_fault(struct adp1653_flash *flash) | 
|  | { | 
|  | struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); | 
|  | int fault; | 
|  | int rval; | 
|  |  | 
|  | fault = i2c_smbus_read_byte_data(client, ADP1653_REG_FAULT); | 
|  | if (IS_ERR_VALUE(fault)) | 
|  | return fault; | 
|  |  | 
|  | flash->fault |= fault; | 
|  |  | 
|  | if (!flash->fault) | 
|  | return 0; | 
|  |  | 
|  | /* Clear faults. */ | 
|  | rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, 0); | 
|  | if (IS_ERR_VALUE(rval)) | 
|  | return rval; | 
|  |  | 
|  | flash->led_mode->val = V4L2_FLASH_LED_MODE_NONE; | 
|  |  | 
|  | rval = adp1653_update_hw(flash); | 
|  | if (IS_ERR_VALUE(rval)) | 
|  | return rval; | 
|  |  | 
|  | return flash->fault; | 
|  | } | 
|  |  | 
|  | static int adp1653_strobe(struct adp1653_flash *flash, int enable) | 
|  | { | 
|  | struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); | 
|  | u8 out_sel = ADP1653_INDICATOR_INTENSITY_uA_TO_REG( | 
|  | flash->indicator_intensity->val) | 
|  | << ADP1653_REG_OUT_SEL_ILED_SHIFT; | 
|  | int rval; | 
|  |  | 
|  | if (flash->led_mode->val != V4L2_FLASH_LED_MODE_FLASH) | 
|  | return -EBUSY; | 
|  |  | 
|  | if (!enable) | 
|  | return i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, | 
|  | out_sel); | 
|  |  | 
|  | out_sel |= ADP1653_FLASH_INTENSITY_mA_TO_REG( | 
|  | flash->flash_intensity->val) | 
|  | << ADP1653_REG_OUT_SEL_HPLED_SHIFT; | 
|  | rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, out_sel); | 
|  | if (rval) | 
|  | return rval; | 
|  |  | 
|  | /* Software strobe using i2c */ | 
|  | rval = i2c_smbus_write_byte_data(client, ADP1653_REG_SW_STROBE, | 
|  | ADP1653_REG_SW_STROBE_SW_STROBE); | 
|  | if (rval) | 
|  | return rval; | 
|  | return i2c_smbus_write_byte_data(client, ADP1653_REG_SW_STROBE, 0); | 
|  | } | 
|  |  | 
|  | /* -------------------------------------------------------------------------- | 
|  | * V4L2 controls | 
|  | */ | 
|  |  | 
|  | static int adp1653_get_ctrl(struct v4l2_ctrl *ctrl) | 
|  | { | 
|  | struct adp1653_flash *flash = | 
|  | container_of(ctrl->handler, struct adp1653_flash, ctrls); | 
|  | int rval; | 
|  |  | 
|  | rval = adp1653_get_fault(flash); | 
|  | if (IS_ERR_VALUE(rval)) | 
|  | return rval; | 
|  |  | 
|  | ctrl->cur.val = 0; | 
|  |  | 
|  | if (flash->fault & ADP1653_REG_FAULT_FLT_SCP) | 
|  | ctrl->cur.val |= V4L2_FLASH_FAULT_SHORT_CIRCUIT; | 
|  | if (flash->fault & ADP1653_REG_FAULT_FLT_OT) | 
|  | ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_TEMPERATURE; | 
|  | if (flash->fault & ADP1653_REG_FAULT_FLT_TMR) | 
|  | ctrl->cur.val |= V4L2_FLASH_FAULT_TIMEOUT; | 
|  | if (flash->fault & ADP1653_REG_FAULT_FLT_OV) | 
|  | ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_VOLTAGE; | 
|  |  | 
|  | flash->fault = 0; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int adp1653_set_ctrl(struct v4l2_ctrl *ctrl) | 
|  | { | 
|  | struct adp1653_flash *flash = | 
|  | container_of(ctrl->handler, struct adp1653_flash, ctrls); | 
|  | int rval; | 
|  |  | 
|  | rval = adp1653_get_fault(flash); | 
|  | if (IS_ERR_VALUE(rval)) | 
|  | return rval; | 
|  | if ((rval & (ADP1653_REG_FAULT_FLT_SCP | | 
|  | ADP1653_REG_FAULT_FLT_OT | | 
|  | ADP1653_REG_FAULT_FLT_OV)) && | 
|  | (ctrl->id == V4L2_CID_FLASH_STROBE || | 
|  | ctrl->id == V4L2_CID_FLASH_TORCH_INTENSITY || | 
|  | ctrl->id == V4L2_CID_FLASH_LED_MODE)) | 
|  | return -EBUSY; | 
|  |  | 
|  | switch (ctrl->id) { | 
|  | case V4L2_CID_FLASH_STROBE: | 
|  | return adp1653_strobe(flash, 1); | 
|  | case V4L2_CID_FLASH_STROBE_STOP: | 
|  | return adp1653_strobe(flash, 0); | 
|  | } | 
|  |  | 
|  | return adp1653_update_hw(flash); | 
|  | } | 
|  |  | 
|  | static const struct v4l2_ctrl_ops adp1653_ctrl_ops = { | 
|  | .g_volatile_ctrl = adp1653_get_ctrl, | 
|  | .s_ctrl = adp1653_set_ctrl, | 
|  | }; | 
|  |  | 
|  | static int adp1653_init_controls(struct adp1653_flash *flash) | 
|  | { | 
|  | struct v4l2_ctrl *fault; | 
|  |  | 
|  | v4l2_ctrl_handler_init(&flash->ctrls, 9); | 
|  |  | 
|  | flash->led_mode = | 
|  | v4l2_ctrl_new_std_menu(&flash->ctrls, &adp1653_ctrl_ops, | 
|  | V4L2_CID_FLASH_LED_MODE, | 
|  | V4L2_FLASH_LED_MODE_TORCH, ~0x7, 0); | 
|  | v4l2_ctrl_new_std_menu(&flash->ctrls, &adp1653_ctrl_ops, | 
|  | V4L2_CID_FLASH_STROBE_SOURCE, | 
|  | V4L2_FLASH_STROBE_SOURCE_SOFTWARE, ~0x1, 0); | 
|  | v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, | 
|  | V4L2_CID_FLASH_STROBE, 0, 0, 0, 0); | 
|  | v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, | 
|  | V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0); | 
|  | flash->flash_timeout = | 
|  | v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, | 
|  | V4L2_CID_FLASH_TIMEOUT, TIMEOUT_MIN, | 
|  | flash->platform_data->max_flash_timeout, | 
|  | TIMEOUT_STEP, | 
|  | flash->platform_data->max_flash_timeout); | 
|  | flash->flash_intensity = | 
|  | v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, | 
|  | V4L2_CID_FLASH_INTENSITY, | 
|  | ADP1653_FLASH_INTENSITY_MIN, | 
|  | flash->platform_data->max_flash_intensity, | 
|  | 1, flash->platform_data->max_flash_intensity); | 
|  | flash->torch_intensity = | 
|  | v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, | 
|  | V4L2_CID_FLASH_TORCH_INTENSITY, | 
|  | ADP1653_TORCH_INTENSITY_MIN, | 
|  | flash->platform_data->max_torch_intensity, | 
|  | ADP1653_FLASH_INTENSITY_STEP, | 
|  | flash->platform_data->max_torch_intensity); | 
|  | flash->indicator_intensity = | 
|  | v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, | 
|  | V4L2_CID_FLASH_INDICATOR_INTENSITY, | 
|  | ADP1653_INDICATOR_INTENSITY_MIN, | 
|  | flash->platform_data->max_indicator_intensity, | 
|  | ADP1653_INDICATOR_INTENSITY_STEP, | 
|  | ADP1653_INDICATOR_INTENSITY_MIN); | 
|  | fault = v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, | 
|  | V4L2_CID_FLASH_FAULT, 0, | 
|  | V4L2_FLASH_FAULT_OVER_VOLTAGE | 
|  | | V4L2_FLASH_FAULT_OVER_TEMPERATURE | 
|  | | V4L2_FLASH_FAULT_SHORT_CIRCUIT, 0, 0); | 
|  |  | 
|  | if (flash->ctrls.error) | 
|  | return flash->ctrls.error; | 
|  |  | 
|  | fault->flags |= V4L2_CTRL_FLAG_VOLATILE; | 
|  |  | 
|  | flash->subdev.ctrl_handler = &flash->ctrls; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* -------------------------------------------------------------------------- | 
|  | * V4L2 subdev operations | 
|  | */ | 
|  |  | 
|  | static int | 
|  | adp1653_init_device(struct adp1653_flash *flash) | 
|  | { | 
|  | struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); | 
|  | int rval; | 
|  |  | 
|  | /* Clear FAULT register by writing zero to OUT_SEL */ | 
|  | rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, 0); | 
|  | if (rval < 0) { | 
|  | dev_err(&client->dev, "failed writing fault register\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | mutex_lock(flash->ctrls.lock); | 
|  | /* Reset faults before reading new ones. */ | 
|  | flash->fault = 0; | 
|  | rval = adp1653_get_fault(flash); | 
|  | mutex_unlock(flash->ctrls.lock); | 
|  | if (rval > 0) { | 
|  | dev_err(&client->dev, "faults detected: 0x%1.1x\n", rval); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | mutex_lock(flash->ctrls.lock); | 
|  | rval = adp1653_update_hw(flash); | 
|  | mutex_unlock(flash->ctrls.lock); | 
|  | if (rval) { | 
|  | dev_err(&client->dev, | 
|  | "adp1653_update_hw failed at %s\n", __func__); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | __adp1653_set_power(struct adp1653_flash *flash, int on) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = flash->platform_data->power(&flash->subdev, on); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | if (!on) | 
|  | return 0; | 
|  |  | 
|  | ret = adp1653_init_device(flash); | 
|  | if (ret < 0) | 
|  | flash->platform_data->power(&flash->subdev, 0); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int | 
|  | adp1653_set_power(struct v4l2_subdev *subdev, int on) | 
|  | { | 
|  | struct adp1653_flash *flash = to_adp1653_flash(subdev); | 
|  | int ret = 0; | 
|  |  | 
|  | mutex_lock(&flash->power_lock); | 
|  |  | 
|  | /* If the power count is modified from 0 to != 0 or from != 0 to 0, | 
|  | * update the power state. | 
|  | */ | 
|  | if (flash->power_count == !on) { | 
|  | ret = __adp1653_set_power(flash, !!on); | 
|  | if (ret < 0) | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | /* Update the power count. */ | 
|  | flash->power_count += on ? 1 : -1; | 
|  | WARN_ON(flash->power_count < 0); | 
|  |  | 
|  | done: | 
|  | mutex_unlock(&flash->power_lock); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int adp1653_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) | 
|  | { | 
|  | return adp1653_set_power(sd, 1); | 
|  | } | 
|  |  | 
|  | static int adp1653_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) | 
|  | { | 
|  | return adp1653_set_power(sd, 0); | 
|  | } | 
|  |  | 
|  | static const struct v4l2_subdev_core_ops adp1653_core_ops = { | 
|  | .s_power = adp1653_set_power, | 
|  | }; | 
|  |  | 
|  | static const struct v4l2_subdev_ops adp1653_ops = { | 
|  | .core = &adp1653_core_ops, | 
|  | }; | 
|  |  | 
|  | static const struct v4l2_subdev_internal_ops adp1653_internal_ops = { | 
|  | .open = adp1653_open, | 
|  | .close = adp1653_close, | 
|  | }; | 
|  |  | 
|  | /* -------------------------------------------------------------------------- | 
|  | * I2C driver | 
|  | */ | 
|  | #ifdef CONFIG_PM | 
|  |  | 
|  | static int adp1653_suspend(struct device *dev) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct v4l2_subdev *subdev = i2c_get_clientdata(client); | 
|  | struct adp1653_flash *flash = to_adp1653_flash(subdev); | 
|  |  | 
|  | if (!flash->power_count) | 
|  | return 0; | 
|  |  | 
|  | return __adp1653_set_power(flash, 0); | 
|  | } | 
|  |  | 
|  | static int adp1653_resume(struct device *dev) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct v4l2_subdev *subdev = i2c_get_clientdata(client); | 
|  | struct adp1653_flash *flash = to_adp1653_flash(subdev); | 
|  |  | 
|  | if (!flash->power_count) | 
|  | return 0; | 
|  |  | 
|  | return __adp1653_set_power(flash, 1); | 
|  | } | 
|  |  | 
|  | #else | 
|  |  | 
|  | #define adp1653_suspend	NULL | 
|  | #define adp1653_resume	NULL | 
|  |  | 
|  | #endif /* CONFIG_PM */ | 
|  |  | 
|  | static int adp1653_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *devid) | 
|  | { | 
|  | struct adp1653_flash *flash; | 
|  | int ret; | 
|  |  | 
|  | /* we couldn't work without platform data */ | 
|  | if (client->dev.platform_data == NULL) | 
|  | return -ENODEV; | 
|  |  | 
|  | flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL); | 
|  | if (flash == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | flash->platform_data = client->dev.platform_data; | 
|  |  | 
|  | mutex_init(&flash->power_lock); | 
|  |  | 
|  | v4l2_i2c_subdev_init(&flash->subdev, client, &adp1653_ops); | 
|  | flash->subdev.internal_ops = &adp1653_internal_ops; | 
|  | flash->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; | 
|  |  | 
|  | ret = adp1653_init_controls(flash); | 
|  | if (ret) | 
|  | goto free_and_quit; | 
|  |  | 
|  | ret = media_entity_init(&flash->subdev.entity, 0, NULL, 0); | 
|  | if (ret < 0) | 
|  | goto free_and_quit; | 
|  |  | 
|  | flash->subdev.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | free_and_quit: | 
|  | v4l2_ctrl_handler_free(&flash->ctrls); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int adp1653_remove(struct i2c_client *client) | 
|  | { | 
|  | struct v4l2_subdev *subdev = i2c_get_clientdata(client); | 
|  | struct adp1653_flash *flash = to_adp1653_flash(subdev); | 
|  |  | 
|  | v4l2_device_unregister_subdev(&flash->subdev); | 
|  | v4l2_ctrl_handler_free(&flash->ctrls); | 
|  | media_entity_cleanup(&flash->subdev.entity); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id adp1653_id_table[] = { | 
|  | { ADP1653_NAME, 0 }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, adp1653_id_table); | 
|  |  | 
|  | static struct dev_pm_ops adp1653_pm_ops = { | 
|  | .suspend	= adp1653_suspend, | 
|  | .resume		= adp1653_resume, | 
|  | }; | 
|  |  | 
|  | static struct i2c_driver adp1653_i2c_driver = { | 
|  | .driver		= { | 
|  | .name	= ADP1653_NAME, | 
|  | .pm	= &adp1653_pm_ops, | 
|  | }, | 
|  | .probe		= adp1653_probe, | 
|  | .remove		= adp1653_remove, | 
|  | .id_table	= adp1653_id_table, | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(adp1653_i2c_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Sakari Ailus <sakari.ailus@nokia.com>"); | 
|  | MODULE_DESCRIPTION("Analog Devices ADP1653 LED flash driver"); | 
|  | MODULE_LICENSE("GPL"); |