|  | /* | 
|  | * AD7887 SPI ADC driver | 
|  | * | 
|  | * Copyright 2010-2011 Analog Devices Inc. | 
|  | * | 
|  | * Licensed under the GPL-2. | 
|  | */ | 
|  |  | 
|  | #include <linux/device.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/sysfs.h> | 
|  | #include <linux/spi/spi.h> | 
|  | #include <linux/regulator/consumer.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/interrupt.h> | 
|  |  | 
|  | #include <linux/iio/iio.h> | 
|  | #include <linux/iio/sysfs.h> | 
|  | #include <linux/iio/buffer.h> | 
|  |  | 
|  | #include <linux/iio/trigger_consumer.h> | 
|  | #include <linux/iio/triggered_buffer.h> | 
|  |  | 
|  | #include <linux/platform_data/ad7887.h> | 
|  |  | 
|  | #define AD7887_REF_DIS		(1 << 5) /* on-chip reference disable */ | 
|  | #define AD7887_DUAL		(1 << 4) /* dual-channel mode */ | 
|  | #define AD7887_CH_AIN1		(1 << 3) /* convert on channel 1, DUAL=1 */ | 
|  | #define AD7887_CH_AIN0		(0 << 3) /* convert on channel 0, DUAL=0,1 */ | 
|  | #define AD7887_PM_MODE1		(0)	 /* CS based shutdown */ | 
|  | #define AD7887_PM_MODE2		(1)	 /* full on */ | 
|  | #define AD7887_PM_MODE3		(2)	 /* auto shutdown after conversion */ | 
|  | #define AD7887_PM_MODE4		(3)	 /* standby mode */ | 
|  |  | 
|  | enum ad7887_channels { | 
|  | AD7887_CH0, | 
|  | AD7887_CH0_CH1, | 
|  | AD7887_CH1, | 
|  | }; | 
|  |  | 
|  | #define RES_MASK(bits)	((1 << (bits)) - 1) | 
|  |  | 
|  | /** | 
|  | * struct ad7887_chip_info - chip specifc information | 
|  | * @int_vref_mv:	the internal reference voltage | 
|  | * @channel:		channel specification | 
|  | */ | 
|  | struct ad7887_chip_info { | 
|  | u16				int_vref_mv; | 
|  | struct iio_chan_spec		channel[3]; | 
|  | }; | 
|  |  | 
|  | struct ad7887_state { | 
|  | struct spi_device		*spi; | 
|  | const struct ad7887_chip_info	*chip_info; | 
|  | struct regulator		*reg; | 
|  | struct spi_transfer		xfer[4]; | 
|  | struct spi_message		msg[3]; | 
|  | struct spi_message		*ring_msg; | 
|  | unsigned char			tx_cmd_buf[4]; | 
|  |  | 
|  | /* | 
|  | * DMA (thus cache coherency maintenance) requires the | 
|  | * transfer buffers to live in their own cache lines. | 
|  | * Buffer needs to be large enough to hold two 16 bit samples and a | 
|  | * 64 bit aligned 64 bit timestamp. | 
|  | */ | 
|  | unsigned char data[ALIGN(4, sizeof(s64)) + sizeof(s64)] | 
|  | ____cacheline_aligned; | 
|  | }; | 
|  |  | 
|  | enum ad7887_supported_device_ids { | 
|  | ID_AD7887 | 
|  | }; | 
|  |  | 
|  | static int ad7887_ring_preenable(struct iio_dev *indio_dev) | 
|  | { | 
|  | struct ad7887_state *st = iio_priv(indio_dev); | 
|  |  | 
|  | /* We know this is a single long so can 'cheat' */ | 
|  | switch (*indio_dev->active_scan_mask) { | 
|  | case (1 << 0): | 
|  | st->ring_msg = &st->msg[AD7887_CH0]; | 
|  | break; | 
|  | case (1 << 1): | 
|  | st->ring_msg = &st->msg[AD7887_CH1]; | 
|  | /* Dummy read: push CH1 setting down to hardware */ | 
|  | spi_sync(st->spi, st->ring_msg); | 
|  | break; | 
|  | case ((1 << 1) | (1 << 0)): | 
|  | st->ring_msg = &st->msg[AD7887_CH0_CH1]; | 
|  | break; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ad7887_ring_postdisable(struct iio_dev *indio_dev) | 
|  | { | 
|  | struct ad7887_state *st = iio_priv(indio_dev); | 
|  |  | 
|  | /* dummy read: restore default CH0 settin */ | 
|  | return spi_sync(st->spi, &st->msg[AD7887_CH0]); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ad7887_trigger_handler() bh of trigger launched polling to ring buffer | 
|  | * | 
|  | * Currently there is no option in this driver to disable the saving of | 
|  | * timestamps within the ring. | 
|  | **/ | 
|  | static irqreturn_t ad7887_trigger_handler(int irq, void *p) | 
|  | { | 
|  | struct iio_poll_func *pf = p; | 
|  | struct iio_dev *indio_dev = pf->indio_dev; | 
|  | struct ad7887_state *st = iio_priv(indio_dev); | 
|  | int b_sent; | 
|  |  | 
|  | b_sent = spi_sync(st->spi, st->ring_msg); | 
|  | if (b_sent) | 
|  | goto done; | 
|  |  | 
|  | iio_push_to_buffers_with_timestamp(indio_dev, st->data, | 
|  | iio_get_time_ns()); | 
|  | done: | 
|  | iio_trigger_notify_done(indio_dev->trig); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static const struct iio_buffer_setup_ops ad7887_ring_setup_ops = { | 
|  | .preenable = &ad7887_ring_preenable, | 
|  | .postenable = &iio_triggered_buffer_postenable, | 
|  | .predisable = &iio_triggered_buffer_predisable, | 
|  | .postdisable = &ad7887_ring_postdisable, | 
|  | }; | 
|  |  | 
|  | static int ad7887_scan_direct(struct ad7887_state *st, unsigned ch) | 
|  | { | 
|  | int ret = spi_sync(st->spi, &st->msg[ch]); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return (st->data[(ch * 2)] << 8) | st->data[(ch * 2) + 1]; | 
|  | } | 
|  |  | 
|  | static int ad7887_read_raw(struct iio_dev *indio_dev, | 
|  | struct iio_chan_spec const *chan, | 
|  | int *val, | 
|  | int *val2, | 
|  | long m) | 
|  | { | 
|  | int ret; | 
|  | struct ad7887_state *st = iio_priv(indio_dev); | 
|  |  | 
|  | switch (m) { | 
|  | case IIO_CHAN_INFO_RAW: | 
|  | mutex_lock(&indio_dev->mlock); | 
|  | if (iio_buffer_enabled(indio_dev)) | 
|  | ret = -EBUSY; | 
|  | else | 
|  | ret = ad7887_scan_direct(st, chan->address); | 
|  | mutex_unlock(&indio_dev->mlock); | 
|  |  | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | *val = ret >> chan->scan_type.shift; | 
|  | *val &= RES_MASK(chan->scan_type.realbits); | 
|  | return IIO_VAL_INT; | 
|  | case IIO_CHAN_INFO_SCALE: | 
|  | if (st->reg) { | 
|  | *val = regulator_get_voltage(st->reg); | 
|  | if (*val < 0) | 
|  | return *val; | 
|  | *val /= 1000; | 
|  | } else { | 
|  | *val = st->chip_info->int_vref_mv; | 
|  | } | 
|  |  | 
|  | *val2 = chan->scan_type.realbits; | 
|  |  | 
|  | return IIO_VAL_FRACTIONAL_LOG2; | 
|  | } | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  |  | 
|  | static const struct ad7887_chip_info ad7887_chip_info_tbl[] = { | 
|  | /* | 
|  | * More devices added in future | 
|  | */ | 
|  | [ID_AD7887] = { | 
|  | .channel[0] = { | 
|  | .type = IIO_VOLTAGE, | 
|  | .indexed = 1, | 
|  | .channel = 1, | 
|  | .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), | 
|  | .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), | 
|  | .address = 1, | 
|  | .scan_index = 1, | 
|  | .scan_type = { | 
|  | .sign = 'u', | 
|  | .realbits = 12, | 
|  | .storagebits = 16, | 
|  | .shift = 0, | 
|  | .endianness = IIO_BE, | 
|  | }, | 
|  | }, | 
|  | .channel[1] = { | 
|  | .type = IIO_VOLTAGE, | 
|  | .indexed = 1, | 
|  | .channel = 0, | 
|  | .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), | 
|  | .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), | 
|  | .address = 0, | 
|  | .scan_index = 0, | 
|  | .scan_type = { | 
|  | .sign = 'u', | 
|  | .realbits = 12, | 
|  | .storagebits = 16, | 
|  | .shift = 0, | 
|  | .endianness = IIO_BE, | 
|  | }, | 
|  | }, | 
|  | .channel[2] = IIO_CHAN_SOFT_TIMESTAMP(2), | 
|  | .int_vref_mv = 2500, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct iio_info ad7887_info = { | 
|  | .read_raw = &ad7887_read_raw, | 
|  | .driver_module = THIS_MODULE, | 
|  | }; | 
|  |  | 
|  | static int ad7887_probe(struct spi_device *spi) | 
|  | { | 
|  | struct ad7887_platform_data *pdata = spi->dev.platform_data; | 
|  | struct ad7887_state *st; | 
|  | struct iio_dev *indio_dev; | 
|  | uint8_t mode; | 
|  | int ret; | 
|  |  | 
|  | indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); | 
|  | if (indio_dev == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | st = iio_priv(indio_dev); | 
|  |  | 
|  | if (!pdata || !pdata->use_onchip_ref) { | 
|  | st->reg = devm_regulator_get(&spi->dev, "vref"); | 
|  | if (IS_ERR(st->reg)) | 
|  | return PTR_ERR(st->reg); | 
|  |  | 
|  | ret = regulator_enable(st->reg); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | st->chip_info = | 
|  | &ad7887_chip_info_tbl[spi_get_device_id(spi)->driver_data]; | 
|  |  | 
|  | spi_set_drvdata(spi, indio_dev); | 
|  | st->spi = spi; | 
|  |  | 
|  | /* Estabilish that the iio_dev is a child of the spi device */ | 
|  | indio_dev->dev.parent = &spi->dev; | 
|  | indio_dev->name = spi_get_device_id(spi)->name; | 
|  | indio_dev->info = &ad7887_info; | 
|  | indio_dev->modes = INDIO_DIRECT_MODE; | 
|  |  | 
|  | /* Setup default message */ | 
|  |  | 
|  | mode = AD7887_PM_MODE4; | 
|  | if (!pdata || !pdata->use_onchip_ref) | 
|  | mode |= AD7887_REF_DIS; | 
|  | if (pdata && pdata->en_dual) | 
|  | mode |= AD7887_DUAL; | 
|  |  | 
|  | st->tx_cmd_buf[0] = AD7887_CH_AIN0 | mode; | 
|  |  | 
|  | st->xfer[0].rx_buf = &st->data[0]; | 
|  | st->xfer[0].tx_buf = &st->tx_cmd_buf[0]; | 
|  | st->xfer[0].len = 2; | 
|  |  | 
|  | spi_message_init(&st->msg[AD7887_CH0]); | 
|  | spi_message_add_tail(&st->xfer[0], &st->msg[AD7887_CH0]); | 
|  |  | 
|  | if (pdata && pdata->en_dual) { | 
|  | st->tx_cmd_buf[2] = AD7887_CH_AIN1 | mode; | 
|  |  | 
|  | st->xfer[1].rx_buf = &st->data[0]; | 
|  | st->xfer[1].tx_buf = &st->tx_cmd_buf[2]; | 
|  | st->xfer[1].len = 2; | 
|  |  | 
|  | st->xfer[2].rx_buf = &st->data[2]; | 
|  | st->xfer[2].tx_buf = &st->tx_cmd_buf[0]; | 
|  | st->xfer[2].len = 2; | 
|  |  | 
|  | spi_message_init(&st->msg[AD7887_CH0_CH1]); | 
|  | spi_message_add_tail(&st->xfer[1], &st->msg[AD7887_CH0_CH1]); | 
|  | spi_message_add_tail(&st->xfer[2], &st->msg[AD7887_CH0_CH1]); | 
|  |  | 
|  | st->xfer[3].rx_buf = &st->data[2]; | 
|  | st->xfer[3].tx_buf = &st->tx_cmd_buf[2]; | 
|  | st->xfer[3].len = 2; | 
|  |  | 
|  | spi_message_init(&st->msg[AD7887_CH1]); | 
|  | spi_message_add_tail(&st->xfer[3], &st->msg[AD7887_CH1]); | 
|  |  | 
|  | indio_dev->channels = st->chip_info->channel; | 
|  | indio_dev->num_channels = 3; | 
|  | } else { | 
|  | indio_dev->channels = &st->chip_info->channel[1]; | 
|  | indio_dev->num_channels = 2; | 
|  | } | 
|  |  | 
|  | ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, | 
|  | &ad7887_trigger_handler, &ad7887_ring_setup_ops); | 
|  | if (ret) | 
|  | goto error_disable_reg; | 
|  |  | 
|  | ret = iio_device_register(indio_dev); | 
|  | if (ret) | 
|  | goto error_unregister_ring; | 
|  |  | 
|  | return 0; | 
|  | error_unregister_ring: | 
|  | iio_triggered_buffer_cleanup(indio_dev); | 
|  | error_disable_reg: | 
|  | if (st->reg) | 
|  | regulator_disable(st->reg); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ad7887_remove(struct spi_device *spi) | 
|  | { | 
|  | struct iio_dev *indio_dev = spi_get_drvdata(spi); | 
|  | struct ad7887_state *st = iio_priv(indio_dev); | 
|  |  | 
|  | iio_device_unregister(indio_dev); | 
|  | iio_triggered_buffer_cleanup(indio_dev); | 
|  | if (st->reg) | 
|  | regulator_disable(st->reg); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct spi_device_id ad7887_id[] = { | 
|  | {"ad7887", ID_AD7887}, | 
|  | {} | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(spi, ad7887_id); | 
|  |  | 
|  | static struct spi_driver ad7887_driver = { | 
|  | .driver = { | 
|  | .name	= "ad7887", | 
|  | .owner	= THIS_MODULE, | 
|  | }, | 
|  | .probe		= ad7887_probe, | 
|  | .remove		= ad7887_remove, | 
|  | .id_table	= ad7887_id, | 
|  | }; | 
|  | module_spi_driver(ad7887_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); | 
|  | MODULE_DESCRIPTION("Analog Devices AD7887 ADC"); | 
|  | MODULE_LICENSE("GPL v2"); |