|  | /* | 
|  | * ISP1704 USB Charger Detection driver | 
|  | * | 
|  | * Copyright (C) 2010 Nokia Corporation | 
|  | * Copyright (C) 2012 - 2013 Pali Rohár <pali.rohar@gmail.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/sysfs.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/power_supply.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/of_gpio.h> | 
|  |  | 
|  | #include <linux/usb/otg.h> | 
|  | #include <linux/usb/ulpi.h> | 
|  | #include <linux/usb/ch9.h> | 
|  | #include <linux/usb/gadget.h> | 
|  | #include <linux/power/isp1704_charger.h> | 
|  |  | 
|  | /* Vendor specific Power Control register */ | 
|  | #define ISP1704_PWR_CTRL		0x3d | 
|  | #define ISP1704_PWR_CTRL_SWCTRL		(1 << 0) | 
|  | #define ISP1704_PWR_CTRL_DET_COMP	(1 << 1) | 
|  | #define ISP1704_PWR_CTRL_BVALID_RISE	(1 << 2) | 
|  | #define ISP1704_PWR_CTRL_BVALID_FALL	(1 << 3) | 
|  | #define ISP1704_PWR_CTRL_DP_WKPU_EN	(1 << 4) | 
|  | #define ISP1704_PWR_CTRL_VDAT_DET	(1 << 5) | 
|  | #define ISP1704_PWR_CTRL_DPVSRC_EN	(1 << 6) | 
|  | #define ISP1704_PWR_CTRL_HWDETECT	(1 << 7) | 
|  |  | 
|  | #define NXP_VENDOR_ID			0x04cc | 
|  |  | 
|  | static u16 isp170x_id[] = { | 
|  | 0x1704, | 
|  | 0x1707, | 
|  | }; | 
|  |  | 
|  | struct isp1704_charger { | 
|  | struct device		*dev; | 
|  | struct power_supply	psy; | 
|  | struct usb_phy		*phy; | 
|  | struct notifier_block	nb; | 
|  | struct work_struct	work; | 
|  |  | 
|  | /* properties */ | 
|  | char			model[8]; | 
|  | unsigned		present:1; | 
|  | unsigned		online:1; | 
|  | unsigned		current_max; | 
|  | }; | 
|  |  | 
|  | static inline int isp1704_read(struct isp1704_charger *isp, u32 reg) | 
|  | { | 
|  | return usb_phy_io_read(isp->phy, reg); | 
|  | } | 
|  |  | 
|  | static inline int isp1704_write(struct isp1704_charger *isp, u32 val, u32 reg) | 
|  | { | 
|  | return usb_phy_io_write(isp->phy, val, reg); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Disable/enable the power from the isp1704 if a function for it | 
|  | * has been provided with platform data. | 
|  | */ | 
|  | static void isp1704_charger_set_power(struct isp1704_charger *isp, bool on) | 
|  | { | 
|  | struct isp1704_charger_data	*board = isp->dev->platform_data; | 
|  |  | 
|  | if (board && board->set_power) | 
|  | board->set_power(on); | 
|  | else if (board) | 
|  | gpio_set_value(board->enable_gpio, on); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Determine is the charging port DCP (dedicated charger) or CDP (Host/HUB | 
|  | * chargers). | 
|  | * | 
|  | * REVISIT: The method is defined in Battery Charging Specification and is | 
|  | * applicable to any ULPI transceiver. Nothing isp170x specific here. | 
|  | */ | 
|  | static inline int isp1704_charger_type(struct isp1704_charger *isp) | 
|  | { | 
|  | u8 reg; | 
|  | u8 func_ctrl; | 
|  | u8 otg_ctrl; | 
|  | int type = POWER_SUPPLY_TYPE_USB_DCP; | 
|  |  | 
|  | func_ctrl = isp1704_read(isp, ULPI_FUNC_CTRL); | 
|  | otg_ctrl = isp1704_read(isp, ULPI_OTG_CTRL); | 
|  |  | 
|  | /* disable pulldowns */ | 
|  | reg = ULPI_OTG_CTRL_DM_PULLDOWN | ULPI_OTG_CTRL_DP_PULLDOWN; | 
|  | isp1704_write(isp, ULPI_CLR(ULPI_OTG_CTRL), reg); | 
|  |  | 
|  | /* full speed */ | 
|  | isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL), | 
|  | ULPI_FUNC_CTRL_XCVRSEL_MASK); | 
|  | isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL), | 
|  | ULPI_FUNC_CTRL_FULL_SPEED); | 
|  |  | 
|  | /* Enable strong pull-up on DP (1.5K) and reset */ | 
|  | reg = ULPI_FUNC_CTRL_TERMSELECT | ULPI_FUNC_CTRL_RESET; | 
|  | isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL), reg); | 
|  | usleep_range(1000, 2000); | 
|  |  | 
|  | reg = isp1704_read(isp, ULPI_DEBUG); | 
|  | if ((reg & 3) != 3) | 
|  | type = POWER_SUPPLY_TYPE_USB_CDP; | 
|  |  | 
|  | /* recover original state */ | 
|  | isp1704_write(isp, ULPI_FUNC_CTRL, func_ctrl); | 
|  | isp1704_write(isp, ULPI_OTG_CTRL, otg_ctrl); | 
|  |  | 
|  | return type; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * ISP1704 detects PS/2 adapters as charger. To make sure the detected charger | 
|  | * is actually a dedicated charger, the following steps need to be taken. | 
|  | */ | 
|  | static inline int isp1704_charger_verify(struct isp1704_charger *isp) | 
|  | { | 
|  | int	ret = 0; | 
|  | u8	r; | 
|  |  | 
|  | /* Reset the transceiver */ | 
|  | r = isp1704_read(isp, ULPI_FUNC_CTRL); | 
|  | r |= ULPI_FUNC_CTRL_RESET; | 
|  | isp1704_write(isp, ULPI_FUNC_CTRL, r); | 
|  | usleep_range(1000, 2000); | 
|  |  | 
|  | /* Set normal mode */ | 
|  | r &= ~(ULPI_FUNC_CTRL_RESET | ULPI_FUNC_CTRL_OPMODE_MASK); | 
|  | isp1704_write(isp, ULPI_FUNC_CTRL, r); | 
|  |  | 
|  | /* Clear the DP and DM pull-down bits */ | 
|  | r = ULPI_OTG_CTRL_DP_PULLDOWN | ULPI_OTG_CTRL_DM_PULLDOWN; | 
|  | isp1704_write(isp, ULPI_CLR(ULPI_OTG_CTRL), r); | 
|  |  | 
|  | /* Enable strong pull-up on DP (1.5K) and reset */ | 
|  | r = ULPI_FUNC_CTRL_TERMSELECT | ULPI_FUNC_CTRL_RESET; | 
|  | isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL), r); | 
|  | usleep_range(1000, 2000); | 
|  |  | 
|  | /* Read the line state */ | 
|  | if (!isp1704_read(isp, ULPI_DEBUG)) { | 
|  | /* Disable strong pull-up on DP (1.5K) */ | 
|  | isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL), | 
|  | ULPI_FUNC_CTRL_TERMSELECT); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* Is it a charger or PS/2 connection */ | 
|  |  | 
|  | /* Enable weak pull-up resistor on DP */ | 
|  | isp1704_write(isp, ULPI_SET(ISP1704_PWR_CTRL), | 
|  | ISP1704_PWR_CTRL_DP_WKPU_EN); | 
|  |  | 
|  | /* Disable strong pull-up on DP (1.5K) */ | 
|  | isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL), | 
|  | ULPI_FUNC_CTRL_TERMSELECT); | 
|  |  | 
|  | /* Enable weak pull-down resistor on DM */ | 
|  | isp1704_write(isp, ULPI_SET(ULPI_OTG_CTRL), | 
|  | ULPI_OTG_CTRL_DM_PULLDOWN); | 
|  |  | 
|  | /* It's a charger if the line states are clear */ | 
|  | if (!(isp1704_read(isp, ULPI_DEBUG))) | 
|  | ret = 1; | 
|  |  | 
|  | /* Disable weak pull-up resistor on DP */ | 
|  | isp1704_write(isp, ULPI_CLR(ISP1704_PWR_CTRL), | 
|  | ISP1704_PWR_CTRL_DP_WKPU_EN); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static inline int isp1704_charger_detect(struct isp1704_charger *isp) | 
|  | { | 
|  | unsigned long	timeout; | 
|  | u8		pwr_ctrl; | 
|  | int		ret = 0; | 
|  |  | 
|  | pwr_ctrl = isp1704_read(isp, ISP1704_PWR_CTRL); | 
|  |  | 
|  | /* set SW control bit in PWR_CTRL register */ | 
|  | isp1704_write(isp, ISP1704_PWR_CTRL, | 
|  | ISP1704_PWR_CTRL_SWCTRL); | 
|  |  | 
|  | /* enable manual charger detection */ | 
|  | isp1704_write(isp, ULPI_SET(ISP1704_PWR_CTRL), | 
|  | ISP1704_PWR_CTRL_SWCTRL | 
|  | | ISP1704_PWR_CTRL_DPVSRC_EN); | 
|  | usleep_range(1000, 2000); | 
|  |  | 
|  | timeout = jiffies + msecs_to_jiffies(300); | 
|  | do { | 
|  | /* Check if there is a charger */ | 
|  | if (isp1704_read(isp, ISP1704_PWR_CTRL) | 
|  | & ISP1704_PWR_CTRL_VDAT_DET) { | 
|  | ret = isp1704_charger_verify(isp); | 
|  | break; | 
|  | } | 
|  | } while (!time_after(jiffies, timeout) && isp->online); | 
|  |  | 
|  | /* recover original state */ | 
|  | isp1704_write(isp, ISP1704_PWR_CTRL, pwr_ctrl); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static inline int isp1704_charger_detect_dcp(struct isp1704_charger *isp) | 
|  | { | 
|  | if (isp1704_charger_detect(isp) && | 
|  | isp1704_charger_type(isp) == POWER_SUPPLY_TYPE_USB_DCP) | 
|  | return true; | 
|  | else | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static void isp1704_charger_work(struct work_struct *data) | 
|  | { | 
|  | struct isp1704_charger	*isp = | 
|  | container_of(data, struct isp1704_charger, work); | 
|  | static DEFINE_MUTEX(lock); | 
|  |  | 
|  | mutex_lock(&lock); | 
|  |  | 
|  | switch (isp->phy->last_event) { | 
|  | case USB_EVENT_VBUS: | 
|  | /* do not call wall charger detection more times */ | 
|  | if (!isp->present) { | 
|  | isp->online = true; | 
|  | isp->present = 1; | 
|  | isp1704_charger_set_power(isp, 1); | 
|  |  | 
|  | /* detect wall charger */ | 
|  | if (isp1704_charger_detect_dcp(isp)) { | 
|  | isp->psy.type = POWER_SUPPLY_TYPE_USB_DCP; | 
|  | isp->current_max = 1800; | 
|  | } else { | 
|  | isp->psy.type = POWER_SUPPLY_TYPE_USB; | 
|  | isp->current_max = 500; | 
|  | } | 
|  |  | 
|  | /* enable data pullups */ | 
|  | if (isp->phy->otg->gadget) | 
|  | usb_gadget_connect(isp->phy->otg->gadget); | 
|  | } | 
|  |  | 
|  | if (isp->psy.type != POWER_SUPPLY_TYPE_USB_DCP) { | 
|  | /* | 
|  | * Only 500mA here or high speed chirp | 
|  | * handshaking may break | 
|  | */ | 
|  | if (isp->current_max > 500) | 
|  | isp->current_max = 500; | 
|  |  | 
|  | if (isp->current_max > 100) | 
|  | isp->psy.type = POWER_SUPPLY_TYPE_USB_CDP; | 
|  | } | 
|  | break; | 
|  | case USB_EVENT_NONE: | 
|  | isp->online = false; | 
|  | isp->present = 0; | 
|  | isp->current_max = 0; | 
|  | isp->psy.type = POWER_SUPPLY_TYPE_USB; | 
|  |  | 
|  | /* | 
|  | * Disable data pullups. We need to prevent the controller from | 
|  | * enumerating. | 
|  | * | 
|  | * FIXME: This is here to allow charger detection with Host/HUB | 
|  | * chargers. The pullups may be enabled elsewhere, so this can | 
|  | * not be the final solution. | 
|  | */ | 
|  | if (isp->phy->otg->gadget) | 
|  | usb_gadget_disconnect(isp->phy->otg->gadget); | 
|  |  | 
|  | isp1704_charger_set_power(isp, 0); | 
|  | break; | 
|  | default: | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | power_supply_changed(&isp->psy); | 
|  | out: | 
|  | mutex_unlock(&lock); | 
|  | } | 
|  |  | 
|  | static int isp1704_notifier_call(struct notifier_block *nb, | 
|  | unsigned long val, void *v) | 
|  | { | 
|  | struct isp1704_charger *isp = | 
|  | container_of(nb, struct isp1704_charger, nb); | 
|  |  | 
|  | schedule_work(&isp->work); | 
|  |  | 
|  | return NOTIFY_OK; | 
|  | } | 
|  |  | 
|  | static int isp1704_charger_get_property(struct power_supply *psy, | 
|  | enum power_supply_property psp, | 
|  | union power_supply_propval *val) | 
|  | { | 
|  | struct isp1704_charger *isp = | 
|  | container_of(psy, struct isp1704_charger, psy); | 
|  |  | 
|  | switch (psp) { | 
|  | case POWER_SUPPLY_PROP_PRESENT: | 
|  | val->intval = isp->present; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_ONLINE: | 
|  | val->intval = isp->online; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_CURRENT_MAX: | 
|  | val->intval = isp->current_max; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_MODEL_NAME: | 
|  | val->strval = isp->model; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_MANUFACTURER: | 
|  | val->strval = "NXP"; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static enum power_supply_property power_props[] = { | 
|  | POWER_SUPPLY_PROP_PRESENT, | 
|  | POWER_SUPPLY_PROP_ONLINE, | 
|  | POWER_SUPPLY_PROP_CURRENT_MAX, | 
|  | POWER_SUPPLY_PROP_MODEL_NAME, | 
|  | POWER_SUPPLY_PROP_MANUFACTURER, | 
|  | }; | 
|  |  | 
|  | static inline int isp1704_test_ulpi(struct isp1704_charger *isp) | 
|  | { | 
|  | int vendor; | 
|  | int product; | 
|  | int i; | 
|  | int ret = -ENODEV; | 
|  |  | 
|  | /* Test ULPI interface */ | 
|  | ret = isp1704_write(isp, ULPI_SCRATCH, 0xaa); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = isp1704_read(isp, ULPI_SCRATCH); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | if (ret != 0xaa) | 
|  | return -ENODEV; | 
|  |  | 
|  | /* Verify the product and vendor id matches */ | 
|  | vendor = isp1704_read(isp, ULPI_VENDOR_ID_LOW); | 
|  | vendor |= isp1704_read(isp, ULPI_VENDOR_ID_HIGH) << 8; | 
|  | if (vendor != NXP_VENDOR_ID) | 
|  | return -ENODEV; | 
|  |  | 
|  | product = isp1704_read(isp, ULPI_PRODUCT_ID_LOW); | 
|  | product |= isp1704_read(isp, ULPI_PRODUCT_ID_HIGH) << 8; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(isp170x_id); i++) { | 
|  | if (product == isp170x_id[i]) { | 
|  | sprintf(isp->model, "isp%x", product); | 
|  | return product; | 
|  | } | 
|  | } | 
|  |  | 
|  | dev_err(isp->dev, "product id %x not matching known ids", product); | 
|  |  | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | static int isp1704_charger_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct isp1704_charger	*isp; | 
|  | int			ret = -ENODEV; | 
|  |  | 
|  | struct isp1704_charger_data *pdata = dev_get_platdata(&pdev->dev); | 
|  | struct device_node *np = pdev->dev.of_node; | 
|  |  | 
|  | if (np) { | 
|  | int gpio = of_get_named_gpio(np, "nxp,enable-gpio", 0); | 
|  |  | 
|  | if (gpio < 0) | 
|  | return gpio; | 
|  |  | 
|  | pdata = devm_kzalloc(&pdev->dev, | 
|  | sizeof(struct isp1704_charger_data), GFP_KERNEL); | 
|  | pdata->enable_gpio = gpio; | 
|  |  | 
|  | dev_info(&pdev->dev, "init gpio %d\n", pdata->enable_gpio); | 
|  |  | 
|  | ret = devm_gpio_request_one(&pdev->dev, pdata->enable_gpio, | 
|  | GPIOF_OUT_INIT_HIGH, "isp1704_reset"); | 
|  | if (ret) | 
|  | goto fail0; | 
|  | } | 
|  |  | 
|  | if (!pdata) { | 
|  | dev_err(&pdev->dev, "missing platform data!\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  |  | 
|  | isp = devm_kzalloc(&pdev->dev, sizeof(*isp), GFP_KERNEL); | 
|  | if (!isp) | 
|  | return -ENOMEM; | 
|  |  | 
|  | if (np) | 
|  | isp->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0); | 
|  | else | 
|  | isp->phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); | 
|  |  | 
|  | if (IS_ERR(isp->phy)) { | 
|  | ret = PTR_ERR(isp->phy); | 
|  | goto fail0; | 
|  | } | 
|  |  | 
|  | isp->dev = &pdev->dev; | 
|  | platform_set_drvdata(pdev, isp); | 
|  |  | 
|  | isp1704_charger_set_power(isp, 1); | 
|  |  | 
|  | ret = isp1704_test_ulpi(isp); | 
|  | if (ret < 0) | 
|  | goto fail1; | 
|  |  | 
|  | isp->psy.name		= "isp1704"; | 
|  | isp->psy.type		= POWER_SUPPLY_TYPE_USB; | 
|  | isp->psy.properties	= power_props; | 
|  | isp->psy.num_properties	= ARRAY_SIZE(power_props); | 
|  | isp->psy.get_property	= isp1704_charger_get_property; | 
|  |  | 
|  | ret = power_supply_register(isp->dev, &isp->psy); | 
|  | if (ret) | 
|  | goto fail1; | 
|  |  | 
|  | /* | 
|  | * REVISIT: using work in order to allow the usb notifications to be | 
|  | * made atomically in the future. | 
|  | */ | 
|  | INIT_WORK(&isp->work, isp1704_charger_work); | 
|  |  | 
|  | isp->nb.notifier_call = isp1704_notifier_call; | 
|  |  | 
|  | ret = usb_register_notifier(isp->phy, &isp->nb); | 
|  | if (ret) | 
|  | goto fail2; | 
|  |  | 
|  | dev_info(isp->dev, "registered with product id %s\n", isp->model); | 
|  |  | 
|  | /* | 
|  | * Taking over the D+ pullup. | 
|  | * | 
|  | * FIXME: The device will be disconnected if it was already | 
|  | * enumerated. The charger driver should be always loaded before any | 
|  | * gadget is loaded. | 
|  | */ | 
|  | if (isp->phy->otg->gadget) | 
|  | usb_gadget_disconnect(isp->phy->otg->gadget); | 
|  |  | 
|  | if (isp->phy->last_event == USB_EVENT_NONE) | 
|  | isp1704_charger_set_power(isp, 0); | 
|  |  | 
|  | /* Detect charger if VBUS is valid (the cable was already plugged). */ | 
|  | if (isp->phy->last_event == USB_EVENT_VBUS && | 
|  | !isp->phy->otg->default_a) | 
|  | schedule_work(&isp->work); | 
|  |  | 
|  | return 0; | 
|  | fail2: | 
|  | power_supply_unregister(&isp->psy); | 
|  | fail1: | 
|  | isp1704_charger_set_power(isp, 0); | 
|  | fail0: | 
|  | dev_err(&pdev->dev, "failed to register isp1704 with error %d\n", ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int isp1704_charger_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct isp1704_charger *isp = platform_get_drvdata(pdev); | 
|  |  | 
|  | usb_unregister_notifier(isp->phy, &isp->nb); | 
|  | power_supply_unregister(&isp->psy); | 
|  | isp1704_charger_set_power(isp, 0); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_OF | 
|  | static const struct of_device_id omap_isp1704_of_match[] = { | 
|  | { .compatible = "nxp,isp1704", }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, omap_isp1704_of_match); | 
|  | #endif | 
|  |  | 
|  | static struct platform_driver isp1704_charger_driver = { | 
|  | .driver = { | 
|  | .name = "isp1704_charger", | 
|  | .of_match_table = of_match_ptr(omap_isp1704_of_match), | 
|  | }, | 
|  | .probe = isp1704_charger_probe, | 
|  | .remove = isp1704_charger_remove, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(isp1704_charger_driver); | 
|  |  | 
|  | MODULE_ALIAS("platform:isp1704_charger"); | 
|  | MODULE_AUTHOR("Nokia Corporation"); | 
|  | MODULE_DESCRIPTION("ISP170x USB Charger driver"); | 
|  | MODULE_LICENSE("GPL"); |