|  | /* drivers/atm/eni.h - Efficient Networks ENI155P device driver declarations */ | 
|  |  | 
|  | /* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ | 
|  |  | 
|  |  | 
|  | #ifndef DRIVER_ATM_ENI_H | 
|  | #define DRIVER_ATM_ENI_H | 
|  |  | 
|  | #include <linux/atm.h> | 
|  | #include <linux/atmdev.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/sonet.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/time.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/atomic.h> | 
|  |  | 
|  | #include "midway.h" | 
|  |  | 
|  |  | 
|  | #define DEV_LABEL	"eni" | 
|  |  | 
|  | #define UBR_BUFFER	(128*1024)	/* UBR buffer size */ | 
|  |  | 
|  | #define RX_DMA_BUF	  8		/* burst and skip a few things */ | 
|  | #define TX_DMA_BUF	100		/* should be enough for 64 kB */ | 
|  |  | 
|  | #define DEFAULT_RX_MULT	300		/* max_sdu*3 */ | 
|  | #define DEFAULT_TX_MULT	300		/* max_sdu*3 */ | 
|  |  | 
|  | #define ENI_ZEROES_SIZE	  4		/* need that many DMA-able zero bytes */ | 
|  |  | 
|  |  | 
|  | struct eni_free { | 
|  | void __iomem *start;		/* counting in bytes */ | 
|  | int order; | 
|  | }; | 
|  |  | 
|  | struct eni_tx { | 
|  | void __iomem *send;		/* base, 0 if unused */ | 
|  | int prescaler;			/* shaping prescaler */ | 
|  | int resolution;			/* shaping divider */ | 
|  | unsigned long tx_pos;		/* current TX write position */ | 
|  | unsigned long words;		/* size of TX queue */ | 
|  | int index;			/* TX channel number */ | 
|  | int reserved;			/* reserved peak cell rate */ | 
|  | int shaping;			/* shaped peak cell rate */ | 
|  | struct sk_buff_head backlog;	/* queue of waiting TX buffers */ | 
|  | }; | 
|  |  | 
|  | struct eni_vcc { | 
|  | int (*rx)(struct atm_vcc *vcc);	/* RX function, NULL if none */ | 
|  | void __iomem *recv;		/* receive buffer */ | 
|  | unsigned long words;		/* its size in words */ | 
|  | unsigned long descr;		/* next descriptor (RX) */ | 
|  | unsigned long rx_pos;		/* current RX descriptor pos */ | 
|  | struct eni_tx *tx;		/* TXer, NULL if none */ | 
|  | int rxing;			/* number of pending PDUs */ | 
|  | int servicing;			/* number of waiting VCs (0 or 1) */ | 
|  | int txing;			/* number of pending TX bytes */ | 
|  | ktime_t timestamp;		/* for RX timing */ | 
|  | struct atm_vcc *next;		/* next pending RX */ | 
|  | struct sk_buff *last;		/* last PDU being DMAed (used to carry | 
|  | discard information) */ | 
|  | }; | 
|  |  | 
|  | struct eni_dev { | 
|  | /*-------------------------------- spinlock */ | 
|  | spinlock_t lock;		/* sync with interrupt */ | 
|  | struct tasklet_struct task;	/* tasklet for interrupt work */ | 
|  | u32 events;			/* pending events */ | 
|  | /*-------------------------------- base pointers into Midway address | 
|  | space */ | 
|  | void __iomem *ioaddr; | 
|  | void __iomem *phy;		/* PHY interface chip registers */ | 
|  | void __iomem *reg;		/* register base */ | 
|  | void __iomem *ram;		/* RAM base */ | 
|  | void __iomem *vci;		/* VCI table */ | 
|  | void __iomem *rx_dma;		/* RX DMA queue */ | 
|  | void __iomem *tx_dma;		/* TX DMA queue */ | 
|  | void __iomem *service;		/* service list */ | 
|  | /*-------------------------------- TX part */ | 
|  | struct eni_tx tx[NR_CHAN];	/* TX channels */ | 
|  | struct eni_tx *ubr;		/* UBR channel */ | 
|  | struct sk_buff_head tx_queue;	/* PDUs currently being TX DMAed*/ | 
|  | wait_queue_head_t tx_wait;	/* for close */ | 
|  | int tx_bw;			/* remaining bandwidth */ | 
|  | u32 dma[TX_DMA_BUF*2];		/* DMA request scratch area */ | 
|  | struct eni_zero {		/* aligned "magic" zeroes */ | 
|  | u32 *addr; | 
|  | dma_addr_t dma; | 
|  | } zero; | 
|  | int tx_mult;			/* buffer size multiplier (percent) */ | 
|  | /*-------------------------------- RX part */ | 
|  | u32 serv_read;			/* host service read index */ | 
|  | struct atm_vcc *fast,*last_fast;/* queues of VCCs with pending PDUs */ | 
|  | struct atm_vcc *slow,*last_slow; | 
|  | struct atm_vcc **rx_map;	/* for fast lookups */ | 
|  | struct sk_buff_head rx_queue;	/* PDUs currently being RX-DMAed */ | 
|  | wait_queue_head_t rx_wait;	/* for close */ | 
|  | int rx_mult;			/* buffer size multiplier (percent) */ | 
|  | /*-------------------------------- statistics */ | 
|  | unsigned long lost;		/* number of lost cells (RX) */ | 
|  | /*-------------------------------- memory management */ | 
|  | unsigned long base_diff;	/* virtual-real base address */ | 
|  | int free_len;			/* free list length */ | 
|  | struct eni_free *free_list;	/* free list */ | 
|  | int free_list_size;		/* maximum size of free list */ | 
|  | /*-------------------------------- ENI links */ | 
|  | struct atm_dev *more;		/* other ENI devices */ | 
|  | /*-------------------------------- general information */ | 
|  | int mem;			/* RAM on board (in bytes) */ | 
|  | int asic;			/* PCI interface type, 0 for FPGA */ | 
|  | unsigned int irq;		/* IRQ */ | 
|  | struct pci_dev *pci_dev;	/* PCI stuff */ | 
|  | }; | 
|  |  | 
|  |  | 
|  | #define ENI_DEV(d) ((struct eni_dev *) (d)->dev_data) | 
|  | #define ENI_VCC(d) ((struct eni_vcc *) (d)->dev_data) | 
|  |  | 
|  |  | 
|  | struct eni_skb_prv { | 
|  | struct atm_skb_data _;		/* reserved */ | 
|  | unsigned long pos;		/* position of next descriptor */ | 
|  | int size;			/* PDU size in reassembly buffer */ | 
|  | dma_addr_t paddr;		/* DMA handle */ | 
|  | }; | 
|  |  | 
|  | #define ENI_PRV_SIZE(skb) (((struct eni_skb_prv *) (skb)->cb)->size) | 
|  | #define ENI_PRV_POS(skb) (((struct eni_skb_prv *) (skb)->cb)->pos) | 
|  | #define ENI_PRV_PADDR(skb) (((struct eni_skb_prv *) (skb)->cb)->paddr) | 
|  |  | 
|  | #endif |