|  | /****************************************************************************** | 
|  | * | 
|  | * Driver for Option High Speed Mobile Devices. | 
|  | * | 
|  | *  Copyright (C) 2008 Option International | 
|  | *                     Filip Aben <f.aben@option.com> | 
|  | *                     Denis Joseph Barrow <d.barow@option.com> | 
|  | *                     Jan Dumon <j.dumon@option.com> | 
|  | *  Copyright (C) 2007 Andrew Bird (Sphere Systems Ltd) | 
|  | *  			<ajb@spheresystems.co.uk> | 
|  | *  Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de> | 
|  | *  Copyright (C) 2008 Novell, Inc. | 
|  | * | 
|  | *  This program is free software; you can redistribute it and/or modify | 
|  | *  it under the terms of the GNU General Public License version 2 as | 
|  | *  published by the Free Software Foundation. | 
|  | * | 
|  | *  This program is distributed in the hope that it will be useful, | 
|  | *  but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | *  GNU General Public License for more details. | 
|  | * | 
|  | *  You should have received a copy of the GNU General Public License | 
|  | *  along with this program; if not, write to the Free Software | 
|  | *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, | 
|  | *  USA | 
|  | * | 
|  | * | 
|  | *****************************************************************************/ | 
|  |  | 
|  | /****************************************************************************** | 
|  | * | 
|  | * Description of the device: | 
|  | * | 
|  | * Interface 0:	Contains the IP network interface on the bulk end points. | 
|  | *		The multiplexed serial ports are using the interrupt and | 
|  | *		control endpoints. | 
|  | *		Interrupt contains a bitmap telling which multiplexed | 
|  | *		serialport needs servicing. | 
|  | * | 
|  | * Interface 1:	Diagnostics port, uses bulk only, do not submit urbs until the | 
|  | *		port is opened, as this have a huge impact on the network port | 
|  | *		throughput. | 
|  | * | 
|  | * Interface 2:	Standard modem interface - circuit switched interface, this | 
|  | *		can be used to make a standard ppp connection however it | 
|  | *              should not be used in conjunction with the IP network interface | 
|  | *              enabled for USB performance reasons i.e. if using this set | 
|  | *              ideally disable_net=1. | 
|  | * | 
|  | *****************************************************************************/ | 
|  |  | 
|  | #include <linux/sched.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/ethtool.h> | 
|  | #include <linux/usb.h> | 
|  | #include <linux/tty.h> | 
|  | #include <linux/tty_driver.h> | 
|  | #include <linux/tty_flip.h> | 
|  | #include <linux/kmod.h> | 
|  | #include <linux/rfkill.h> | 
|  | #include <linux/ip.h> | 
|  | #include <linux/uaccess.h> | 
|  | #include <linux/usb/cdc.h> | 
|  | #include <net/arp.h> | 
|  | #include <asm/byteorder.h> | 
|  | #include <linux/serial_core.h> | 
|  | #include <linux/serial.h> | 
|  |  | 
|  |  | 
|  | #define MOD_AUTHOR			"Option Wireless" | 
|  | #define MOD_DESCRIPTION			"USB High Speed Option driver" | 
|  | #define MOD_LICENSE			"GPL" | 
|  |  | 
|  | #define HSO_MAX_NET_DEVICES		10 | 
|  | #define HSO__MAX_MTU			2048 | 
|  | #define DEFAULT_MTU			1500 | 
|  | #define DEFAULT_MRU			1500 | 
|  |  | 
|  | #define CTRL_URB_RX_SIZE		1024 | 
|  | #define CTRL_URB_TX_SIZE		64 | 
|  |  | 
|  | #define BULK_URB_RX_SIZE		4096 | 
|  | #define BULK_URB_TX_SIZE		8192 | 
|  |  | 
|  | #define MUX_BULK_RX_BUF_SIZE		HSO__MAX_MTU | 
|  | #define MUX_BULK_TX_BUF_SIZE		HSO__MAX_MTU | 
|  | #define MUX_BULK_RX_BUF_COUNT		4 | 
|  | #define USB_TYPE_OPTION_VENDOR		0x20 | 
|  |  | 
|  | /* These definitions are used with the struct hso_net flags element */ | 
|  | /* - use *_bit operations on it. (bit indices not values.) */ | 
|  | #define HSO_NET_RUNNING			0 | 
|  |  | 
|  | #define	HSO_NET_TX_TIMEOUT		(HZ*10) | 
|  |  | 
|  | #define HSO_SERIAL_MAGIC		0x48534f31 | 
|  |  | 
|  | /* Number of ttys to handle */ | 
|  | #define HSO_SERIAL_TTY_MINORS		256 | 
|  |  | 
|  | #define MAX_RX_URBS			2 | 
|  |  | 
|  | /*****************************************************************************/ | 
|  | /* Debugging functions                                                       */ | 
|  | /*****************************************************************************/ | 
|  | #define D__(lvl_, fmt, arg...)				\ | 
|  | do {						\ | 
|  | printk(lvl_ "[%d:%s]: " fmt "\n",	\ | 
|  | __LINE__, __func__, ## arg);	\ | 
|  | } while (0) | 
|  |  | 
|  | #define D_(lvl, args...)				\ | 
|  | do {						\ | 
|  | if (lvl & debug)			\ | 
|  | D__(KERN_INFO, args);		\ | 
|  | } while (0) | 
|  |  | 
|  | #define D1(args...)	D_(0x01, ##args) | 
|  | #define D2(args...)	D_(0x02, ##args) | 
|  | #define D3(args...)	D_(0x04, ##args) | 
|  | #define D4(args...)	D_(0x08, ##args) | 
|  | #define D5(args...)	D_(0x10, ##args) | 
|  |  | 
|  | /*****************************************************************************/ | 
|  | /* Enumerators                                                               */ | 
|  | /*****************************************************************************/ | 
|  | enum pkt_parse_state { | 
|  | WAIT_IP, | 
|  | WAIT_DATA, | 
|  | WAIT_SYNC | 
|  | }; | 
|  |  | 
|  | /*****************************************************************************/ | 
|  | /* Structs                                                                   */ | 
|  | /*****************************************************************************/ | 
|  |  | 
|  | struct hso_shared_int { | 
|  | struct usb_endpoint_descriptor *intr_endp; | 
|  | void *shared_intr_buf; | 
|  | struct urb *shared_intr_urb; | 
|  | struct usb_device *usb; | 
|  | int use_count; | 
|  | int ref_count; | 
|  | struct mutex shared_int_lock; | 
|  | }; | 
|  |  | 
|  | struct hso_net { | 
|  | struct hso_device *parent; | 
|  | struct net_device *net; | 
|  | struct rfkill *rfkill; | 
|  | char name[24]; | 
|  |  | 
|  | struct usb_endpoint_descriptor *in_endp; | 
|  | struct usb_endpoint_descriptor *out_endp; | 
|  |  | 
|  | struct urb *mux_bulk_rx_urb_pool[MUX_BULK_RX_BUF_COUNT]; | 
|  | struct urb *mux_bulk_tx_urb; | 
|  | void *mux_bulk_rx_buf_pool[MUX_BULK_RX_BUF_COUNT]; | 
|  | void *mux_bulk_tx_buf; | 
|  |  | 
|  | struct sk_buff *skb_rx_buf; | 
|  | struct sk_buff *skb_tx_buf; | 
|  |  | 
|  | enum pkt_parse_state rx_parse_state; | 
|  | spinlock_t net_lock; | 
|  |  | 
|  | unsigned short rx_buf_size; | 
|  | unsigned short rx_buf_missing; | 
|  | struct iphdr rx_ip_hdr; | 
|  |  | 
|  | unsigned long flags; | 
|  | }; | 
|  |  | 
|  | enum rx_ctrl_state{ | 
|  | RX_IDLE, | 
|  | RX_SENT, | 
|  | RX_PENDING | 
|  | }; | 
|  |  | 
|  | #define BM_REQUEST_TYPE (0xa1) | 
|  | #define B_NOTIFICATION  (0x20) | 
|  | #define W_VALUE         (0x0) | 
|  | #define W_LENGTH        (0x2) | 
|  |  | 
|  | #define B_OVERRUN       (0x1<<6) | 
|  | #define B_PARITY        (0x1<<5) | 
|  | #define B_FRAMING       (0x1<<4) | 
|  | #define B_RING_SIGNAL   (0x1<<3) | 
|  | #define B_BREAK         (0x1<<2) | 
|  | #define B_TX_CARRIER    (0x1<<1) | 
|  | #define B_RX_CARRIER    (0x1<<0) | 
|  |  | 
|  | struct hso_serial_state_notification { | 
|  | u8 bmRequestType; | 
|  | u8 bNotification; | 
|  | u16 wValue; | 
|  | u16 wIndex; | 
|  | u16 wLength; | 
|  | u16 UART_state_bitmap; | 
|  | } __packed; | 
|  |  | 
|  | struct hso_tiocmget { | 
|  | struct mutex mutex; | 
|  | wait_queue_head_t waitq; | 
|  | int    intr_completed; | 
|  | struct usb_endpoint_descriptor *endp; | 
|  | struct urb *urb; | 
|  | struct hso_serial_state_notification serial_state_notification; | 
|  | u16    prev_UART_state_bitmap; | 
|  | struct uart_icount icount; | 
|  | }; | 
|  |  | 
|  |  | 
|  | struct hso_serial { | 
|  | struct hso_device *parent; | 
|  | int magic; | 
|  | u8 minor; | 
|  |  | 
|  | struct hso_shared_int *shared_int; | 
|  |  | 
|  | /* rx/tx urb could be either a bulk urb or a control urb depending | 
|  | on which serial port it is used on. */ | 
|  | struct urb *rx_urb[MAX_RX_URBS]; | 
|  | u8 num_rx_urbs; | 
|  | u8 *rx_data[MAX_RX_URBS]; | 
|  | u16 rx_data_length;	/* should contain allocated length */ | 
|  |  | 
|  | struct urb *tx_urb; | 
|  | u8 *tx_data; | 
|  | u8 *tx_buffer; | 
|  | u16 tx_data_length;	/* should contain allocated length */ | 
|  | u16 tx_data_count; | 
|  | u16 tx_buffer_count; | 
|  | struct usb_ctrlrequest ctrl_req_tx; | 
|  | struct usb_ctrlrequest ctrl_req_rx; | 
|  |  | 
|  | struct usb_endpoint_descriptor *in_endp; | 
|  | struct usb_endpoint_descriptor *out_endp; | 
|  |  | 
|  | enum rx_ctrl_state rx_state; | 
|  | u8 rts_state; | 
|  | u8 dtr_state; | 
|  | unsigned tx_urb_used:1; | 
|  |  | 
|  | struct tty_port port; | 
|  | /* from usb_serial_port */ | 
|  | spinlock_t serial_lock; | 
|  |  | 
|  | int (*write_data) (struct hso_serial *serial); | 
|  | struct hso_tiocmget  *tiocmget; | 
|  | /* Hacks required to get flow control | 
|  | * working on the serial receive buffers | 
|  | * so as not to drop characters on the floor. | 
|  | */ | 
|  | int  curr_rx_urb_idx; | 
|  | u8   rx_urb_filled[MAX_RX_URBS]; | 
|  | struct tasklet_struct unthrottle_tasklet; | 
|  | }; | 
|  |  | 
|  | struct hso_device { | 
|  | union { | 
|  | struct hso_serial *dev_serial; | 
|  | struct hso_net *dev_net; | 
|  | } port_data; | 
|  |  | 
|  | u32 port_spec; | 
|  |  | 
|  | u8 is_active; | 
|  | u8 usb_gone; | 
|  | struct work_struct async_get_intf; | 
|  | struct work_struct async_put_intf; | 
|  |  | 
|  | struct usb_device *usb; | 
|  | struct usb_interface *interface; | 
|  |  | 
|  | struct device *dev; | 
|  | struct kref ref; | 
|  | struct mutex mutex; | 
|  | }; | 
|  |  | 
|  | /* Type of interface */ | 
|  | #define HSO_INTF_MASK		0xFF00 | 
|  | #define	HSO_INTF_MUX		0x0100 | 
|  | #define	HSO_INTF_BULK   	0x0200 | 
|  |  | 
|  | /* Type of port */ | 
|  | #define HSO_PORT_MASK		0xFF | 
|  | #define HSO_PORT_NO_PORT	0x0 | 
|  | #define	HSO_PORT_CONTROL	0x1 | 
|  | #define	HSO_PORT_APP		0x2 | 
|  | #define	HSO_PORT_GPS		0x3 | 
|  | #define	HSO_PORT_PCSC		0x4 | 
|  | #define	HSO_PORT_APP2		0x5 | 
|  | #define HSO_PORT_GPS_CONTROL	0x6 | 
|  | #define HSO_PORT_MSD		0x7 | 
|  | #define HSO_PORT_VOICE		0x8 | 
|  | #define HSO_PORT_DIAG2		0x9 | 
|  | #define	HSO_PORT_DIAG		0x10 | 
|  | #define	HSO_PORT_MODEM		0x11 | 
|  | #define	HSO_PORT_NETWORK	0x12 | 
|  |  | 
|  | /* Additional device info */ | 
|  | #define HSO_INFO_MASK		0xFF000000 | 
|  | #define HSO_INFO_CRC_BUG	0x01000000 | 
|  |  | 
|  | /*****************************************************************************/ | 
|  | /* Prototypes                                                                */ | 
|  | /*****************************************************************************/ | 
|  | /* Serial driver functions */ | 
|  | static int hso_serial_tiocmset(struct tty_struct *tty, | 
|  | unsigned int set, unsigned int clear); | 
|  | static void ctrl_callback(struct urb *urb); | 
|  | static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial); | 
|  | static void hso_kick_transmit(struct hso_serial *serial); | 
|  | /* Helper functions */ | 
|  | static int hso_mux_submit_intr_urb(struct hso_shared_int *mux_int, | 
|  | struct usb_device *usb, gfp_t gfp); | 
|  | static void handle_usb_error(int status, const char *function, | 
|  | struct hso_device *hso_dev); | 
|  | static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf, | 
|  | int type, int dir); | 
|  | static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports); | 
|  | static void hso_free_interface(struct usb_interface *intf); | 
|  | static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags); | 
|  | static int hso_stop_serial_device(struct hso_device *hso_dev); | 
|  | static int hso_start_net_device(struct hso_device *hso_dev); | 
|  | static void hso_free_shared_int(struct hso_shared_int *shared_int); | 
|  | static int hso_stop_net_device(struct hso_device *hso_dev); | 
|  | static void hso_serial_ref_free(struct kref *ref); | 
|  | static void hso_std_serial_read_bulk_callback(struct urb *urb); | 
|  | static int hso_mux_serial_read(struct hso_serial *serial); | 
|  | static void async_get_intf(struct work_struct *data); | 
|  | static void async_put_intf(struct work_struct *data); | 
|  | static int hso_put_activity(struct hso_device *hso_dev); | 
|  | static int hso_get_activity(struct hso_device *hso_dev); | 
|  | static void tiocmget_intr_callback(struct urb *urb); | 
|  | /*****************************************************************************/ | 
|  | /* Helping functions                                                         */ | 
|  | /*****************************************************************************/ | 
|  |  | 
|  | /* #define DEBUG */ | 
|  |  | 
|  | static inline struct hso_net *dev2net(struct hso_device *hso_dev) | 
|  | { | 
|  | return hso_dev->port_data.dev_net; | 
|  | } | 
|  |  | 
|  | static inline struct hso_serial *dev2ser(struct hso_device *hso_dev) | 
|  | { | 
|  | return hso_dev->port_data.dev_serial; | 
|  | } | 
|  |  | 
|  | /* Debugging functions */ | 
|  | #ifdef DEBUG | 
|  | static void dbg_dump(int line_count, const char *func_name, unsigned char *buf, | 
|  | unsigned int len) | 
|  | { | 
|  | static char name[255]; | 
|  |  | 
|  | sprintf(name, "hso[%d:%s]", line_count, func_name); | 
|  | print_hex_dump_bytes(name, DUMP_PREFIX_NONE, buf, len); | 
|  | } | 
|  |  | 
|  | #define DUMP(buf_, len_)	\ | 
|  | dbg_dump(__LINE__, __func__, (unsigned char *)buf_, len_) | 
|  |  | 
|  | #define DUMP1(buf_, len_)			\ | 
|  | do {					\ | 
|  | if (0x01 & debug)		\ | 
|  | DUMP(buf_, len_);	\ | 
|  | } while (0) | 
|  | #else | 
|  | #define DUMP(buf_, len_) | 
|  | #define DUMP1(buf_, len_) | 
|  | #endif | 
|  |  | 
|  | /* module parameters */ | 
|  | static int debug; | 
|  | static int tty_major; | 
|  | static int disable_net; | 
|  |  | 
|  | /* driver info */ | 
|  | static const char driver_name[] = "hso"; | 
|  | static const char tty_filename[] = "ttyHS"; | 
|  | static const char *version = __FILE__ ": " MOD_AUTHOR; | 
|  | /* the usb driver itself (registered in hso_init) */ | 
|  | static struct usb_driver hso_driver; | 
|  | /* serial structures */ | 
|  | static struct tty_driver *tty_drv; | 
|  | static struct hso_device *serial_table[HSO_SERIAL_TTY_MINORS]; | 
|  | static struct hso_device *network_table[HSO_MAX_NET_DEVICES]; | 
|  | static spinlock_t serial_table_lock; | 
|  |  | 
|  | static const s32 default_port_spec[] = { | 
|  | HSO_INTF_MUX | HSO_PORT_NETWORK, | 
|  | HSO_INTF_BULK | HSO_PORT_DIAG, | 
|  | HSO_INTF_BULK | HSO_PORT_MODEM, | 
|  | 0 | 
|  | }; | 
|  |  | 
|  | static const s32 icon321_port_spec[] = { | 
|  | HSO_INTF_MUX | HSO_PORT_NETWORK, | 
|  | HSO_INTF_BULK | HSO_PORT_DIAG2, | 
|  | HSO_INTF_BULK | HSO_PORT_MODEM, | 
|  | HSO_INTF_BULK | HSO_PORT_DIAG, | 
|  | 0 | 
|  | }; | 
|  |  | 
|  | #define default_port_device(vendor, product)	\ | 
|  | USB_DEVICE(vendor, product),	\ | 
|  | .driver_info = (kernel_ulong_t)default_port_spec | 
|  |  | 
|  | #define icon321_port_device(vendor, product)	\ | 
|  | USB_DEVICE(vendor, product),	\ | 
|  | .driver_info = (kernel_ulong_t)icon321_port_spec | 
|  |  | 
|  | /* list of devices we support */ | 
|  | static const struct usb_device_id hso_ids[] = { | 
|  | {default_port_device(0x0af0, 0x6711)}, | 
|  | {default_port_device(0x0af0, 0x6731)}, | 
|  | {default_port_device(0x0af0, 0x6751)}, | 
|  | {default_port_device(0x0af0, 0x6771)}, | 
|  | {default_port_device(0x0af0, 0x6791)}, | 
|  | {default_port_device(0x0af0, 0x6811)}, | 
|  | {default_port_device(0x0af0, 0x6911)}, | 
|  | {default_port_device(0x0af0, 0x6951)}, | 
|  | {default_port_device(0x0af0, 0x6971)}, | 
|  | {default_port_device(0x0af0, 0x7011)}, | 
|  | {default_port_device(0x0af0, 0x7031)}, | 
|  | {default_port_device(0x0af0, 0x7051)}, | 
|  | {default_port_device(0x0af0, 0x7071)}, | 
|  | {default_port_device(0x0af0, 0x7111)}, | 
|  | {default_port_device(0x0af0, 0x7211)}, | 
|  | {default_port_device(0x0af0, 0x7251)}, | 
|  | {default_port_device(0x0af0, 0x7271)}, | 
|  | {default_port_device(0x0af0, 0x7311)}, | 
|  | {default_port_device(0x0af0, 0xc031)},	/* Icon-Edge */ | 
|  | {icon321_port_device(0x0af0, 0xd013)},	/* Module HSxPA */ | 
|  | {icon321_port_device(0x0af0, 0xd031)},	/* Icon-321 */ | 
|  | {icon321_port_device(0x0af0, 0xd033)},	/* Icon-322 */ | 
|  | {USB_DEVICE(0x0af0, 0x7301)},		/* GE40x */ | 
|  | {USB_DEVICE(0x0af0, 0x7361)},		/* GE40x */ | 
|  | {USB_DEVICE(0x0af0, 0x7381)},		/* GE40x */ | 
|  | {USB_DEVICE(0x0af0, 0x7401)},		/* GI 0401 */ | 
|  | {USB_DEVICE(0x0af0, 0x7501)},		/* GTM 382 */ | 
|  | {USB_DEVICE(0x0af0, 0x7601)},		/* GE40x */ | 
|  | {USB_DEVICE(0x0af0, 0x7701)}, | 
|  | {USB_DEVICE(0x0af0, 0x7706)}, | 
|  | {USB_DEVICE(0x0af0, 0x7801)}, | 
|  | {USB_DEVICE(0x0af0, 0x7901)}, | 
|  | {USB_DEVICE(0x0af0, 0x7A01)}, | 
|  | {USB_DEVICE(0x0af0, 0x7A05)}, | 
|  | {USB_DEVICE(0x0af0, 0x8200)}, | 
|  | {USB_DEVICE(0x0af0, 0x8201)}, | 
|  | {USB_DEVICE(0x0af0, 0x8300)}, | 
|  | {USB_DEVICE(0x0af0, 0x8302)}, | 
|  | {USB_DEVICE(0x0af0, 0x8304)}, | 
|  | {USB_DEVICE(0x0af0, 0x8400)}, | 
|  | {USB_DEVICE(0x0af0, 0x8600)}, | 
|  | {USB_DEVICE(0x0af0, 0x8800)}, | 
|  | {USB_DEVICE(0x0af0, 0x8900)}, | 
|  | {USB_DEVICE(0x0af0, 0x9000)}, | 
|  | {USB_DEVICE(0x0af0, 0x9200)},		/* Option GTM671WFS */ | 
|  | {USB_DEVICE(0x0af0, 0xd035)}, | 
|  | {USB_DEVICE(0x0af0, 0xd055)}, | 
|  | {USB_DEVICE(0x0af0, 0xd155)}, | 
|  | {USB_DEVICE(0x0af0, 0xd255)}, | 
|  | {USB_DEVICE(0x0af0, 0xd057)}, | 
|  | {USB_DEVICE(0x0af0, 0xd157)}, | 
|  | {USB_DEVICE(0x0af0, 0xd257)}, | 
|  | {USB_DEVICE(0x0af0, 0xd357)}, | 
|  | {USB_DEVICE(0x0af0, 0xd058)}, | 
|  | {USB_DEVICE(0x0af0, 0xc100)}, | 
|  | {} | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(usb, hso_ids); | 
|  |  | 
|  | /* Sysfs attribute */ | 
|  | static ssize_t hso_sysfs_show_porttype(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct hso_device *hso_dev = dev_get_drvdata(dev); | 
|  | char *port_name; | 
|  |  | 
|  | if (!hso_dev) | 
|  | return 0; | 
|  |  | 
|  | switch (hso_dev->port_spec & HSO_PORT_MASK) { | 
|  | case HSO_PORT_CONTROL: | 
|  | port_name = "Control"; | 
|  | break; | 
|  | case HSO_PORT_APP: | 
|  | port_name = "Application"; | 
|  | break; | 
|  | case HSO_PORT_APP2: | 
|  | port_name = "Application2"; | 
|  | break; | 
|  | case HSO_PORT_GPS: | 
|  | port_name = "GPS"; | 
|  | break; | 
|  | case HSO_PORT_GPS_CONTROL: | 
|  | port_name = "GPS Control"; | 
|  | break; | 
|  | case HSO_PORT_PCSC: | 
|  | port_name = "PCSC"; | 
|  | break; | 
|  | case HSO_PORT_DIAG: | 
|  | port_name = "Diagnostic"; | 
|  | break; | 
|  | case HSO_PORT_DIAG2: | 
|  | port_name = "Diagnostic2"; | 
|  | break; | 
|  | case HSO_PORT_MODEM: | 
|  | port_name = "Modem"; | 
|  | break; | 
|  | case HSO_PORT_NETWORK: | 
|  | port_name = "Network"; | 
|  | break; | 
|  | default: | 
|  | port_name = "Unknown"; | 
|  | break; | 
|  | } | 
|  |  | 
|  | return sprintf(buf, "%s\n", port_name); | 
|  | } | 
|  | static DEVICE_ATTR(hsotype, S_IRUGO, hso_sysfs_show_porttype, NULL); | 
|  |  | 
|  | static struct attribute *hso_serial_dev_attrs[] = { | 
|  | &dev_attr_hsotype.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | ATTRIBUTE_GROUPS(hso_serial_dev); | 
|  |  | 
|  | static int hso_urb_to_index(struct hso_serial *serial, struct urb *urb) | 
|  | { | 
|  | int idx; | 
|  |  | 
|  | for (idx = 0; idx < serial->num_rx_urbs; idx++) | 
|  | if (serial->rx_urb[idx] == urb) | 
|  | return idx; | 
|  | dev_err(serial->parent->dev, "hso_urb_to_index failed\n"); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* converts mux value to a port spec value */ | 
|  | static u32 hso_mux_to_port(int mux) | 
|  | { | 
|  | u32 result; | 
|  |  | 
|  | switch (mux) { | 
|  | case 0x1: | 
|  | result = HSO_PORT_CONTROL; | 
|  | break; | 
|  | case 0x2: | 
|  | result = HSO_PORT_APP; | 
|  | break; | 
|  | case 0x4: | 
|  | result = HSO_PORT_PCSC; | 
|  | break; | 
|  | case 0x8: | 
|  | result = HSO_PORT_GPS; | 
|  | break; | 
|  | case 0x10: | 
|  | result = HSO_PORT_APP2; | 
|  | break; | 
|  | default: | 
|  | result = HSO_PORT_NO_PORT; | 
|  | } | 
|  | return result; | 
|  | } | 
|  |  | 
|  | /* converts port spec value to a mux value */ | 
|  | static u32 hso_port_to_mux(int port) | 
|  | { | 
|  | u32 result; | 
|  |  | 
|  | switch (port & HSO_PORT_MASK) { | 
|  | case HSO_PORT_CONTROL: | 
|  | result = 0x0; | 
|  | break; | 
|  | case HSO_PORT_APP: | 
|  | result = 0x1; | 
|  | break; | 
|  | case HSO_PORT_PCSC: | 
|  | result = 0x2; | 
|  | break; | 
|  | case HSO_PORT_GPS: | 
|  | result = 0x3; | 
|  | break; | 
|  | case HSO_PORT_APP2: | 
|  | result = 0x4; | 
|  | break; | 
|  | default: | 
|  | result = 0x0; | 
|  | } | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static struct hso_serial *get_serial_by_shared_int_and_type( | 
|  | struct hso_shared_int *shared_int, | 
|  | int mux) | 
|  | { | 
|  | int i, port; | 
|  |  | 
|  | port = hso_mux_to_port(mux); | 
|  |  | 
|  | for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) { | 
|  | if (serial_table[i] && | 
|  | (dev2ser(serial_table[i])->shared_int == shared_int) && | 
|  | ((serial_table[i]->port_spec & HSO_PORT_MASK) == port)) { | 
|  | return dev2ser(serial_table[i]); | 
|  | } | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static struct hso_serial *get_serial_by_index(unsigned index) | 
|  | { | 
|  | struct hso_serial *serial = NULL; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&serial_table_lock, flags); | 
|  | if (serial_table[index]) | 
|  | serial = dev2ser(serial_table[index]); | 
|  | spin_unlock_irqrestore(&serial_table_lock, flags); | 
|  |  | 
|  | return serial; | 
|  | } | 
|  |  | 
|  | static int get_free_serial_index(void) | 
|  | { | 
|  | int index; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&serial_table_lock, flags); | 
|  | for (index = 0; index < HSO_SERIAL_TTY_MINORS; index++) { | 
|  | if (serial_table[index] == NULL) { | 
|  | spin_unlock_irqrestore(&serial_table_lock, flags); | 
|  | return index; | 
|  | } | 
|  | } | 
|  | spin_unlock_irqrestore(&serial_table_lock, flags); | 
|  |  | 
|  | printk(KERN_ERR "%s: no free serial devices in table\n", __func__); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static void set_serial_by_index(unsigned index, struct hso_serial *serial) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&serial_table_lock, flags); | 
|  | if (serial) | 
|  | serial_table[index] = serial->parent; | 
|  | else | 
|  | serial_table[index] = NULL; | 
|  | spin_unlock_irqrestore(&serial_table_lock, flags); | 
|  | } | 
|  |  | 
|  | static void handle_usb_error(int status, const char *function, | 
|  | struct hso_device *hso_dev) | 
|  | { | 
|  | char *explanation; | 
|  |  | 
|  | switch (status) { | 
|  | case -ENODEV: | 
|  | explanation = "no device"; | 
|  | break; | 
|  | case -ENOENT: | 
|  | explanation = "endpoint not enabled"; | 
|  | break; | 
|  | case -EPIPE: | 
|  | explanation = "endpoint stalled"; | 
|  | break; | 
|  | case -ENOSPC: | 
|  | explanation = "not enough bandwidth"; | 
|  | break; | 
|  | case -ESHUTDOWN: | 
|  | explanation = "device disabled"; | 
|  | break; | 
|  | case -EHOSTUNREACH: | 
|  | explanation = "device suspended"; | 
|  | break; | 
|  | case -EINVAL: | 
|  | case -EAGAIN: | 
|  | case -EFBIG: | 
|  | case -EMSGSIZE: | 
|  | explanation = "internal error"; | 
|  | break; | 
|  | case -EILSEQ: | 
|  | case -EPROTO: | 
|  | case -ETIME: | 
|  | case -ETIMEDOUT: | 
|  | explanation = "protocol error"; | 
|  | if (hso_dev) | 
|  | usb_queue_reset_device(hso_dev->interface); | 
|  | break; | 
|  | default: | 
|  | explanation = "unknown status"; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* log a meaningful explanation of an USB status */ | 
|  | D1("%s: received USB status - %s (%d)", function, explanation, status); | 
|  | } | 
|  |  | 
|  | /* Network interface functions */ | 
|  |  | 
|  | /* called when net interface is brought up by ifconfig */ | 
|  | static int hso_net_open(struct net_device *net) | 
|  | { | 
|  | struct hso_net *odev = netdev_priv(net); | 
|  | unsigned long flags = 0; | 
|  |  | 
|  | if (!odev) { | 
|  | dev_err(&net->dev, "No net device !\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | odev->skb_tx_buf = NULL; | 
|  |  | 
|  | /* setup environment */ | 
|  | spin_lock_irqsave(&odev->net_lock, flags); | 
|  | odev->rx_parse_state = WAIT_IP; | 
|  | odev->rx_buf_size = 0; | 
|  | odev->rx_buf_missing = sizeof(struct iphdr); | 
|  | spin_unlock_irqrestore(&odev->net_lock, flags); | 
|  |  | 
|  | /* We are up and running. */ | 
|  | set_bit(HSO_NET_RUNNING, &odev->flags); | 
|  | hso_start_net_device(odev->parent); | 
|  |  | 
|  | /* Tell the kernel we are ready to start receiving from it */ | 
|  | netif_start_queue(net); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* called when interface is brought down by ifconfig */ | 
|  | static int hso_net_close(struct net_device *net) | 
|  | { | 
|  | struct hso_net *odev = netdev_priv(net); | 
|  |  | 
|  | /* we don't need the queue anymore */ | 
|  | netif_stop_queue(net); | 
|  | /* no longer running */ | 
|  | clear_bit(HSO_NET_RUNNING, &odev->flags); | 
|  |  | 
|  | hso_stop_net_device(odev->parent); | 
|  |  | 
|  | /* done */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* USB tells is xmit done, we should start the netqueue again */ | 
|  | static void write_bulk_callback(struct urb *urb) | 
|  | { | 
|  | struct hso_net *odev = urb->context; | 
|  | int status = urb->status; | 
|  |  | 
|  | /* Sanity check */ | 
|  | if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) { | 
|  | dev_err(&urb->dev->dev, "%s: device not running\n", __func__); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Do we still have a valid kernel network device? */ | 
|  | if (!netif_device_present(odev->net)) { | 
|  | dev_err(&urb->dev->dev, "%s: net device not present\n", | 
|  | __func__); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* log status, but don't act on it, we don't need to resubmit anything | 
|  | * anyhow */ | 
|  | if (status) | 
|  | handle_usb_error(status, __func__, odev->parent); | 
|  |  | 
|  | hso_put_activity(odev->parent); | 
|  |  | 
|  | /* Tell the network interface we are ready for another frame */ | 
|  | netif_wake_queue(odev->net); | 
|  | } | 
|  |  | 
|  | /* called by kernel when we need to transmit a packet */ | 
|  | static netdev_tx_t hso_net_start_xmit(struct sk_buff *skb, | 
|  | struct net_device *net) | 
|  | { | 
|  | struct hso_net *odev = netdev_priv(net); | 
|  | int result; | 
|  |  | 
|  | /* Tell the kernel, "No more frames 'til we are done with this one." */ | 
|  | netif_stop_queue(net); | 
|  | if (hso_get_activity(odev->parent) == -EAGAIN) { | 
|  | odev->skb_tx_buf = skb; | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | /* log if asked */ | 
|  | DUMP1(skb->data, skb->len); | 
|  | /* Copy it from kernel memory to OUR memory */ | 
|  | memcpy(odev->mux_bulk_tx_buf, skb->data, skb->len); | 
|  | D1("len: %d/%d", skb->len, MUX_BULK_TX_BUF_SIZE); | 
|  |  | 
|  | /* Fill in the URB for shipping it out. */ | 
|  | usb_fill_bulk_urb(odev->mux_bulk_tx_urb, | 
|  | odev->parent->usb, | 
|  | usb_sndbulkpipe(odev->parent->usb, | 
|  | odev->out_endp-> | 
|  | bEndpointAddress & 0x7F), | 
|  | odev->mux_bulk_tx_buf, skb->len, write_bulk_callback, | 
|  | odev); | 
|  |  | 
|  | /* Deal with the Zero Length packet problem, I hope */ | 
|  | odev->mux_bulk_tx_urb->transfer_flags |= URB_ZERO_PACKET; | 
|  |  | 
|  | /* Send the URB on its merry way. */ | 
|  | result = usb_submit_urb(odev->mux_bulk_tx_urb, GFP_ATOMIC); | 
|  | if (result) { | 
|  | dev_warn(&odev->parent->interface->dev, | 
|  | "failed mux_bulk_tx_urb %d\n", result); | 
|  | net->stats.tx_errors++; | 
|  | netif_start_queue(net); | 
|  | } else { | 
|  | net->stats.tx_packets++; | 
|  | net->stats.tx_bytes += skb->len; | 
|  | } | 
|  | dev_kfree_skb(skb); | 
|  | /* we're done */ | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | static const struct ethtool_ops ops = { | 
|  | .get_link = ethtool_op_get_link | 
|  | }; | 
|  |  | 
|  | /* called when a packet did not ack after watchdogtimeout */ | 
|  | static void hso_net_tx_timeout(struct net_device *net) | 
|  | { | 
|  | struct hso_net *odev = netdev_priv(net); | 
|  |  | 
|  | if (!odev) | 
|  | return; | 
|  |  | 
|  | /* Tell syslog we are hosed. */ | 
|  | dev_warn(&net->dev, "Tx timed out.\n"); | 
|  |  | 
|  | /* Tear the waiting frame off the list */ | 
|  | if (odev->mux_bulk_tx_urb && | 
|  | (odev->mux_bulk_tx_urb->status == -EINPROGRESS)) | 
|  | usb_unlink_urb(odev->mux_bulk_tx_urb); | 
|  |  | 
|  | /* Update statistics */ | 
|  | net->stats.tx_errors++; | 
|  | } | 
|  |  | 
|  | /* make a real packet from the received USB buffer */ | 
|  | static void packetizeRx(struct hso_net *odev, unsigned char *ip_pkt, | 
|  | unsigned int count, unsigned char is_eop) | 
|  | { | 
|  | unsigned short temp_bytes; | 
|  | unsigned short buffer_offset = 0; | 
|  | unsigned short frame_len; | 
|  | unsigned char *tmp_rx_buf; | 
|  |  | 
|  | /* log if needed */ | 
|  | D1("Rx %d bytes", count); | 
|  | DUMP(ip_pkt, min(128, (int)count)); | 
|  |  | 
|  | while (count) { | 
|  | switch (odev->rx_parse_state) { | 
|  | case WAIT_IP: | 
|  | /* waiting for IP header. */ | 
|  | /* wanted bytes - size of ip header */ | 
|  | temp_bytes = | 
|  | (count < | 
|  | odev->rx_buf_missing) ? count : odev-> | 
|  | rx_buf_missing; | 
|  |  | 
|  | memcpy(((unsigned char *)(&odev->rx_ip_hdr)) + | 
|  | odev->rx_buf_size, ip_pkt + buffer_offset, | 
|  | temp_bytes); | 
|  |  | 
|  | odev->rx_buf_size += temp_bytes; | 
|  | buffer_offset += temp_bytes; | 
|  | odev->rx_buf_missing -= temp_bytes; | 
|  | count -= temp_bytes; | 
|  |  | 
|  | if (!odev->rx_buf_missing) { | 
|  | /* header is complete allocate an sk_buffer and | 
|  | * continue to WAIT_DATA */ | 
|  | frame_len = ntohs(odev->rx_ip_hdr.tot_len); | 
|  |  | 
|  | if ((frame_len > DEFAULT_MRU) || | 
|  | (frame_len < sizeof(struct iphdr))) { | 
|  | dev_err(&odev->net->dev, | 
|  | "Invalid frame (%d) length\n", | 
|  | frame_len); | 
|  | odev->rx_parse_state = WAIT_SYNC; | 
|  | continue; | 
|  | } | 
|  | /* Allocate an sk_buff */ | 
|  | odev->skb_rx_buf = netdev_alloc_skb(odev->net, | 
|  | frame_len); | 
|  | if (!odev->skb_rx_buf) { | 
|  | /* We got no receive buffer. */ | 
|  | D1("could not allocate memory"); | 
|  | odev->rx_parse_state = WAIT_SYNC; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* Copy what we got so far. make room for iphdr | 
|  | * after tail. */ | 
|  | tmp_rx_buf = | 
|  | skb_put(odev->skb_rx_buf, | 
|  | sizeof(struct iphdr)); | 
|  | memcpy(tmp_rx_buf, (char *)&(odev->rx_ip_hdr), | 
|  | sizeof(struct iphdr)); | 
|  |  | 
|  | /* ETH_HLEN */ | 
|  | odev->rx_buf_size = sizeof(struct iphdr); | 
|  |  | 
|  | /* Filip actually use .tot_len */ | 
|  | odev->rx_buf_missing = | 
|  | frame_len - sizeof(struct iphdr); | 
|  | odev->rx_parse_state = WAIT_DATA; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case WAIT_DATA: | 
|  | temp_bytes = (count < odev->rx_buf_missing) | 
|  | ? count : odev->rx_buf_missing; | 
|  |  | 
|  | /* Copy the rest of the bytes that are left in the | 
|  | * buffer into the waiting sk_buf. */ | 
|  | /* Make room for temp_bytes after tail. */ | 
|  | tmp_rx_buf = skb_put(odev->skb_rx_buf, temp_bytes); | 
|  | memcpy(tmp_rx_buf, ip_pkt + buffer_offset, temp_bytes); | 
|  |  | 
|  | odev->rx_buf_missing -= temp_bytes; | 
|  | count -= temp_bytes; | 
|  | buffer_offset += temp_bytes; | 
|  | odev->rx_buf_size += temp_bytes; | 
|  | if (!odev->rx_buf_missing) { | 
|  | /* Packet is complete. Inject into stack. */ | 
|  | /* We have IP packet here */ | 
|  | odev->skb_rx_buf->protocol = cpu_to_be16(ETH_P_IP); | 
|  | skb_reset_mac_header(odev->skb_rx_buf); | 
|  |  | 
|  | /* Ship it off to the kernel */ | 
|  | netif_rx(odev->skb_rx_buf); | 
|  | /* No longer our buffer. */ | 
|  | odev->skb_rx_buf = NULL; | 
|  |  | 
|  | /* update out statistics */ | 
|  | odev->net->stats.rx_packets++; | 
|  |  | 
|  | odev->net->stats.rx_bytes += odev->rx_buf_size; | 
|  |  | 
|  | odev->rx_buf_size = 0; | 
|  | odev->rx_buf_missing = sizeof(struct iphdr); | 
|  | odev->rx_parse_state = WAIT_IP; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case WAIT_SYNC: | 
|  | D1(" W_S"); | 
|  | count = 0; | 
|  | break; | 
|  | default: | 
|  | D1(" "); | 
|  | count--; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Recovery mechanism for WAIT_SYNC state. */ | 
|  | if (is_eop) { | 
|  | if (odev->rx_parse_state == WAIT_SYNC) { | 
|  | odev->rx_parse_state = WAIT_IP; | 
|  | odev->rx_buf_size = 0; | 
|  | odev->rx_buf_missing = sizeof(struct iphdr); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void fix_crc_bug(struct urb *urb, __le16 max_packet_size) | 
|  | { | 
|  | static const u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF }; | 
|  | u32 rest = urb->actual_length % le16_to_cpu(max_packet_size); | 
|  |  | 
|  | if (((rest == 5) || (rest == 6)) && | 
|  | !memcmp(((u8 *)urb->transfer_buffer) + urb->actual_length - 4, | 
|  | crc_check, 4)) { | 
|  | urb->actual_length -= 4; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Moving data from usb to kernel (in interrupt state) */ | 
|  | static void read_bulk_callback(struct urb *urb) | 
|  | { | 
|  | struct hso_net *odev = urb->context; | 
|  | struct net_device *net; | 
|  | int result; | 
|  | int status = urb->status; | 
|  |  | 
|  | /* is al ok?  (Filip: Who's Al ?) */ | 
|  | if (status) { | 
|  | handle_usb_error(status, __func__, odev->parent); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Sanity check */ | 
|  | if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) { | 
|  | D1("BULK IN callback but driver is not active!"); | 
|  | return; | 
|  | } | 
|  | usb_mark_last_busy(urb->dev); | 
|  |  | 
|  | net = odev->net; | 
|  |  | 
|  | if (!netif_device_present(net)) { | 
|  | /* Somebody killed our network interface... */ | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (odev->parent->port_spec & HSO_INFO_CRC_BUG) | 
|  | fix_crc_bug(urb, odev->in_endp->wMaxPacketSize); | 
|  |  | 
|  | /* do we even have a packet? */ | 
|  | if (urb->actual_length) { | 
|  | /* Handle the IP stream, add header and push it onto network | 
|  | * stack if the packet is complete. */ | 
|  | spin_lock(&odev->net_lock); | 
|  | packetizeRx(odev, urb->transfer_buffer, urb->actual_length, | 
|  | (urb->transfer_buffer_length > | 
|  | urb->actual_length) ? 1 : 0); | 
|  | spin_unlock(&odev->net_lock); | 
|  | } | 
|  |  | 
|  | /* We are done with this URB, resubmit it. Prep the USB to wait for | 
|  | * another frame. Reuse same as received. */ | 
|  | usb_fill_bulk_urb(urb, | 
|  | odev->parent->usb, | 
|  | usb_rcvbulkpipe(odev->parent->usb, | 
|  | odev->in_endp-> | 
|  | bEndpointAddress & 0x7F), | 
|  | urb->transfer_buffer, MUX_BULK_RX_BUF_SIZE, | 
|  | read_bulk_callback, odev); | 
|  |  | 
|  | /* Give this to the USB subsystem so it can tell us when more data | 
|  | * arrives. */ | 
|  | result = usb_submit_urb(urb, GFP_ATOMIC); | 
|  | if (result) | 
|  | dev_warn(&odev->parent->interface->dev, | 
|  | "%s failed submit mux_bulk_rx_urb %d\n", __func__, | 
|  | result); | 
|  | } | 
|  |  | 
|  | /* Serial driver functions */ | 
|  |  | 
|  | static void hso_init_termios(struct ktermios *termios) | 
|  | { | 
|  | /* | 
|  | * The default requirements for this device are: | 
|  | */ | 
|  | termios->c_iflag &= | 
|  | ~(IGNBRK	/* disable ignore break */ | 
|  | | BRKINT	/* disable break causes interrupt */ | 
|  | | PARMRK	/* disable mark parity errors */ | 
|  | | ISTRIP	/* disable clear high bit of input characters */ | 
|  | | INLCR		/* disable translate NL to CR */ | 
|  | | IGNCR		/* disable ignore CR */ | 
|  | | ICRNL		/* disable translate CR to NL */ | 
|  | | IXON);	/* disable enable XON/XOFF flow control */ | 
|  |  | 
|  | /* disable postprocess output characters */ | 
|  | termios->c_oflag &= ~OPOST; | 
|  |  | 
|  | termios->c_lflag &= | 
|  | ~(ECHO		/* disable echo input characters */ | 
|  | | ECHONL	/* disable echo new line */ | 
|  | | ICANON	/* disable erase, kill, werase, and rprnt | 
|  | special characters */ | 
|  | | ISIG		/* disable interrupt, quit, and suspend special | 
|  | characters */ | 
|  | | IEXTEN);	/* disable non-POSIX special characters */ | 
|  |  | 
|  | termios->c_cflag &= | 
|  | ~(CSIZE		/* no size */ | 
|  | | PARENB	/* disable parity bit */ | 
|  | | CBAUD		/* clear current baud rate */ | 
|  | | CBAUDEX);	/* clear current buad rate */ | 
|  |  | 
|  | termios->c_cflag |= CS8;	/* character size 8 bits */ | 
|  |  | 
|  | /* baud rate 115200 */ | 
|  | tty_termios_encode_baud_rate(termios, 115200, 115200); | 
|  | } | 
|  |  | 
|  | static void _hso_serial_set_termios(struct tty_struct *tty, | 
|  | struct ktermios *old) | 
|  | { | 
|  | struct hso_serial *serial = tty->driver_data; | 
|  |  | 
|  | if (!serial) { | 
|  | printk(KERN_ERR "%s: no tty structures", __func__); | 
|  | return; | 
|  | } | 
|  |  | 
|  | D4("port %d", serial->minor); | 
|  |  | 
|  | /* | 
|  | *	Fix up unsupported bits | 
|  | */ | 
|  | tty->termios.c_iflag &= ~IXON; /* disable enable XON/XOFF flow control */ | 
|  |  | 
|  | tty->termios.c_cflag &= | 
|  | ~(CSIZE		/* no size */ | 
|  | | PARENB	/* disable parity bit */ | 
|  | | CBAUD		/* clear current baud rate */ | 
|  | | CBAUDEX);	/* clear current buad rate */ | 
|  |  | 
|  | tty->termios.c_cflag |= CS8;	/* character size 8 bits */ | 
|  |  | 
|  | /* baud rate 115200 */ | 
|  | tty_encode_baud_rate(tty, 115200, 115200); | 
|  | } | 
|  |  | 
|  | static void hso_resubmit_rx_bulk_urb(struct hso_serial *serial, struct urb *urb) | 
|  | { | 
|  | int result; | 
|  | /* We are done with this URB, resubmit it. Prep the USB to wait for | 
|  | * another frame */ | 
|  | usb_fill_bulk_urb(urb, serial->parent->usb, | 
|  | usb_rcvbulkpipe(serial->parent->usb, | 
|  | serial->in_endp-> | 
|  | bEndpointAddress & 0x7F), | 
|  | urb->transfer_buffer, serial->rx_data_length, | 
|  | hso_std_serial_read_bulk_callback, serial); | 
|  | /* Give this to the USB subsystem so it can tell us when more data | 
|  | * arrives. */ | 
|  | result = usb_submit_urb(urb, GFP_ATOMIC); | 
|  | if (result) { | 
|  | dev_err(&urb->dev->dev, "%s failed submit serial rx_urb %d\n", | 
|  | __func__, result); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  |  | 
|  | static void put_rxbuf_data_and_resubmit_bulk_urb(struct hso_serial *serial) | 
|  | { | 
|  | int count; | 
|  | struct urb *curr_urb; | 
|  |  | 
|  | while (serial->rx_urb_filled[serial->curr_rx_urb_idx]) { | 
|  | curr_urb = serial->rx_urb[serial->curr_rx_urb_idx]; | 
|  | count = put_rxbuf_data(curr_urb, serial); | 
|  | if (count == -1) | 
|  | return; | 
|  | if (count == 0) { | 
|  | serial->curr_rx_urb_idx++; | 
|  | if (serial->curr_rx_urb_idx >= serial->num_rx_urbs) | 
|  | serial->curr_rx_urb_idx = 0; | 
|  | hso_resubmit_rx_bulk_urb(serial, curr_urb); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void put_rxbuf_data_and_resubmit_ctrl_urb(struct hso_serial *serial) | 
|  | { | 
|  | int count = 0; | 
|  | struct urb *urb; | 
|  |  | 
|  | urb = serial->rx_urb[0]; | 
|  | if (serial->port.count > 0) { | 
|  | count = put_rxbuf_data(urb, serial); | 
|  | if (count == -1) | 
|  | return; | 
|  | } | 
|  | /* Re issue a read as long as we receive data. */ | 
|  |  | 
|  | if (count == 0 && ((urb->actual_length != 0) || | 
|  | (serial->rx_state == RX_PENDING))) { | 
|  | serial->rx_state = RX_SENT; | 
|  | hso_mux_serial_read(serial); | 
|  | } else | 
|  | serial->rx_state = RX_IDLE; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* read callback for Diag and CS port */ | 
|  | static void hso_std_serial_read_bulk_callback(struct urb *urb) | 
|  | { | 
|  | struct hso_serial *serial = urb->context; | 
|  | int status = urb->status; | 
|  |  | 
|  | D4("\n--- Got serial_read_bulk callback %02x ---", status); | 
|  |  | 
|  | /* sanity check */ | 
|  | if (!serial) { | 
|  | D1("serial == NULL"); | 
|  | return; | 
|  | } | 
|  | if (status) { | 
|  | handle_usb_error(status, __func__, serial->parent); | 
|  | return; | 
|  | } | 
|  |  | 
|  | D1("Actual length = %d\n", urb->actual_length); | 
|  | DUMP1(urb->transfer_buffer, urb->actual_length); | 
|  |  | 
|  | /* Anyone listening? */ | 
|  | if (serial->port.count == 0) | 
|  | return; | 
|  |  | 
|  | if (serial->parent->port_spec & HSO_INFO_CRC_BUG) | 
|  | fix_crc_bug(urb, serial->in_endp->wMaxPacketSize); | 
|  | /* Valid data, handle RX data */ | 
|  | spin_lock(&serial->serial_lock); | 
|  | serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 1; | 
|  | put_rxbuf_data_and_resubmit_bulk_urb(serial); | 
|  | spin_unlock(&serial->serial_lock); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This needs to be a tasklet otherwise we will | 
|  | * end up recursively calling this function. | 
|  | */ | 
|  | static void hso_unthrottle_tasklet(struct hso_serial *serial) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&serial->serial_lock, flags); | 
|  | if ((serial->parent->port_spec & HSO_INTF_MUX)) | 
|  | put_rxbuf_data_and_resubmit_ctrl_urb(serial); | 
|  | else | 
|  | put_rxbuf_data_and_resubmit_bulk_urb(serial); | 
|  | spin_unlock_irqrestore(&serial->serial_lock, flags); | 
|  | } | 
|  |  | 
|  | static	void hso_unthrottle(struct tty_struct *tty) | 
|  | { | 
|  | struct hso_serial *serial = tty->driver_data; | 
|  |  | 
|  | tasklet_hi_schedule(&serial->unthrottle_tasklet); | 
|  | } | 
|  |  | 
|  | /* open the requested serial port */ | 
|  | static int hso_serial_open(struct tty_struct *tty, struct file *filp) | 
|  | { | 
|  | struct hso_serial *serial = get_serial_by_index(tty->index); | 
|  | int result; | 
|  |  | 
|  | /* sanity check */ | 
|  | if (serial == NULL || serial->magic != HSO_SERIAL_MAGIC) { | 
|  | WARN_ON(1); | 
|  | tty->driver_data = NULL; | 
|  | D1("Failed to open port"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | mutex_lock(&serial->parent->mutex); | 
|  | result = usb_autopm_get_interface(serial->parent->interface); | 
|  | if (result < 0) | 
|  | goto err_out; | 
|  |  | 
|  | D1("Opening %d", serial->minor); | 
|  |  | 
|  | /* setup */ | 
|  | tty->driver_data = serial; | 
|  | tty_port_tty_set(&serial->port, tty); | 
|  |  | 
|  | /* check for port already opened, if not set the termios */ | 
|  | serial->port.count++; | 
|  | if (serial->port.count == 1) { | 
|  | serial->rx_state = RX_IDLE; | 
|  | /* Force default termio settings */ | 
|  | _hso_serial_set_termios(tty, NULL); | 
|  | tasklet_init(&serial->unthrottle_tasklet, | 
|  | (void (*)(unsigned long))hso_unthrottle_tasklet, | 
|  | (unsigned long)serial); | 
|  | result = hso_start_serial_device(serial->parent, GFP_KERNEL); | 
|  | if (result) { | 
|  | hso_stop_serial_device(serial->parent); | 
|  | serial->port.count--; | 
|  | } else { | 
|  | kref_get(&serial->parent->ref); | 
|  | } | 
|  | } else { | 
|  | D1("Port was already open"); | 
|  | } | 
|  |  | 
|  | usb_autopm_put_interface(serial->parent->interface); | 
|  |  | 
|  | /* done */ | 
|  | if (result) | 
|  | hso_serial_tiocmset(tty, TIOCM_RTS | TIOCM_DTR, 0); | 
|  | err_out: | 
|  | mutex_unlock(&serial->parent->mutex); | 
|  | return result; | 
|  | } | 
|  |  | 
|  | /* close the requested serial port */ | 
|  | static void hso_serial_close(struct tty_struct *tty, struct file *filp) | 
|  | { | 
|  | struct hso_serial *serial = tty->driver_data; | 
|  | u8 usb_gone; | 
|  |  | 
|  | D1("Closing serial port"); | 
|  |  | 
|  | /* Open failed, no close cleanup required */ | 
|  | if (serial == NULL) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&serial->parent->mutex); | 
|  | usb_gone = serial->parent->usb_gone; | 
|  |  | 
|  | if (!usb_gone) | 
|  | usb_autopm_get_interface(serial->parent->interface); | 
|  |  | 
|  | /* reset the rts and dtr */ | 
|  | /* do the actual close */ | 
|  | serial->port.count--; | 
|  |  | 
|  | if (serial->port.count <= 0) { | 
|  | serial->port.count = 0; | 
|  | tty_port_tty_set(&serial->port, NULL); | 
|  | if (!usb_gone) | 
|  | hso_stop_serial_device(serial->parent); | 
|  | tasklet_kill(&serial->unthrottle_tasklet); | 
|  | } | 
|  |  | 
|  | if (!usb_gone) | 
|  | usb_autopm_put_interface(serial->parent->interface); | 
|  |  | 
|  | mutex_unlock(&serial->parent->mutex); | 
|  | } | 
|  |  | 
|  | /* close the requested serial port */ | 
|  | static int hso_serial_write(struct tty_struct *tty, const unsigned char *buf, | 
|  | int count) | 
|  | { | 
|  | struct hso_serial *serial = tty->driver_data; | 
|  | int space, tx_bytes; | 
|  | unsigned long flags; | 
|  |  | 
|  | /* sanity check */ | 
|  | if (serial == NULL) { | 
|  | printk(KERN_ERR "%s: serial is NULL\n", __func__); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&serial->serial_lock, flags); | 
|  |  | 
|  | space = serial->tx_data_length - serial->tx_buffer_count; | 
|  | tx_bytes = (count < space) ? count : space; | 
|  |  | 
|  | if (!tx_bytes) | 
|  | goto out; | 
|  |  | 
|  | memcpy(serial->tx_buffer + serial->tx_buffer_count, buf, tx_bytes); | 
|  | serial->tx_buffer_count += tx_bytes; | 
|  |  | 
|  | out: | 
|  | spin_unlock_irqrestore(&serial->serial_lock, flags); | 
|  |  | 
|  | hso_kick_transmit(serial); | 
|  | /* done */ | 
|  | return tx_bytes; | 
|  | } | 
|  |  | 
|  | /* how much room is there for writing */ | 
|  | static int hso_serial_write_room(struct tty_struct *tty) | 
|  | { | 
|  | struct hso_serial *serial = tty->driver_data; | 
|  | int room; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&serial->serial_lock, flags); | 
|  | room = serial->tx_data_length - serial->tx_buffer_count; | 
|  | spin_unlock_irqrestore(&serial->serial_lock, flags); | 
|  |  | 
|  | /* return free room */ | 
|  | return room; | 
|  | } | 
|  |  | 
|  | static void hso_serial_cleanup(struct tty_struct *tty) | 
|  | { | 
|  | struct hso_serial *serial = tty->driver_data; | 
|  |  | 
|  | if (!serial) | 
|  | return; | 
|  |  | 
|  | kref_put(&serial->parent->ref, hso_serial_ref_free); | 
|  | } | 
|  |  | 
|  | /* setup the term */ | 
|  | static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old) | 
|  | { | 
|  | struct hso_serial *serial = tty->driver_data; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (old) | 
|  | D5("Termios called with: cflags new[%d] - old[%d]", | 
|  | tty->termios.c_cflag, old->c_cflag); | 
|  |  | 
|  | /* the actual setup */ | 
|  | spin_lock_irqsave(&serial->serial_lock, flags); | 
|  | if (serial->port.count) | 
|  | _hso_serial_set_termios(tty, old); | 
|  | else | 
|  | tty->termios = *old; | 
|  | spin_unlock_irqrestore(&serial->serial_lock, flags); | 
|  |  | 
|  | /* done */ | 
|  | } | 
|  |  | 
|  | /* how many characters in the buffer */ | 
|  | static int hso_serial_chars_in_buffer(struct tty_struct *tty) | 
|  | { | 
|  | struct hso_serial *serial = tty->driver_data; | 
|  | int chars; | 
|  | unsigned long flags; | 
|  |  | 
|  | /* sanity check */ | 
|  | if (serial == NULL) | 
|  | return 0; | 
|  |  | 
|  | spin_lock_irqsave(&serial->serial_lock, flags); | 
|  | chars = serial->tx_buffer_count; | 
|  | spin_unlock_irqrestore(&serial->serial_lock, flags); | 
|  |  | 
|  | return chars; | 
|  | } | 
|  | static int tiocmget_submit_urb(struct hso_serial *serial, | 
|  | struct hso_tiocmget *tiocmget, | 
|  | struct usb_device *usb) | 
|  | { | 
|  | int result; | 
|  |  | 
|  | if (serial->parent->usb_gone) | 
|  | return -ENODEV; | 
|  | usb_fill_int_urb(tiocmget->urb, usb, | 
|  | usb_rcvintpipe(usb, | 
|  | tiocmget->endp-> | 
|  | bEndpointAddress & 0x7F), | 
|  | &tiocmget->serial_state_notification, | 
|  | sizeof(struct hso_serial_state_notification), | 
|  | tiocmget_intr_callback, serial, | 
|  | tiocmget->endp->bInterval); | 
|  | result = usb_submit_urb(tiocmget->urb, GFP_ATOMIC); | 
|  | if (result) { | 
|  | dev_warn(&usb->dev, "%s usb_submit_urb failed %d\n", __func__, | 
|  | result); | 
|  | } | 
|  | return result; | 
|  |  | 
|  | } | 
|  |  | 
|  | static void tiocmget_intr_callback(struct urb *urb) | 
|  | { | 
|  | struct hso_serial *serial = urb->context; | 
|  | struct hso_tiocmget *tiocmget; | 
|  | int status = urb->status; | 
|  | u16 UART_state_bitmap, prev_UART_state_bitmap; | 
|  | struct uart_icount *icount; | 
|  | struct hso_serial_state_notification *serial_state_notification; | 
|  | struct usb_device *usb; | 
|  | struct usb_interface *interface; | 
|  | int if_num; | 
|  |  | 
|  | /* Sanity checks */ | 
|  | if (!serial) | 
|  | return; | 
|  | if (status) { | 
|  | handle_usb_error(status, __func__, serial->parent); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* tiocmget is only supported on HSO_PORT_MODEM */ | 
|  | tiocmget = serial->tiocmget; | 
|  | if (!tiocmget) | 
|  | return; | 
|  | BUG_ON((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM); | 
|  |  | 
|  | usb = serial->parent->usb; | 
|  | interface = serial->parent->interface; | 
|  |  | 
|  | if_num = interface->cur_altsetting->desc.bInterfaceNumber; | 
|  |  | 
|  | /* wIndex should be the USB interface number of the port to which the | 
|  | * notification applies, which should always be the Modem port. | 
|  | */ | 
|  | serial_state_notification = &tiocmget->serial_state_notification; | 
|  | if (serial_state_notification->bmRequestType != BM_REQUEST_TYPE || | 
|  | serial_state_notification->bNotification != B_NOTIFICATION || | 
|  | le16_to_cpu(serial_state_notification->wValue) != W_VALUE || | 
|  | le16_to_cpu(serial_state_notification->wIndex) != if_num || | 
|  | le16_to_cpu(serial_state_notification->wLength) != W_LENGTH) { | 
|  | dev_warn(&usb->dev, | 
|  | "hso received invalid serial state notification\n"); | 
|  | DUMP(serial_state_notification, | 
|  | sizeof(struct hso_serial_state_notification)); | 
|  | } else { | 
|  |  | 
|  | UART_state_bitmap = le16_to_cpu(serial_state_notification-> | 
|  | UART_state_bitmap); | 
|  | prev_UART_state_bitmap = tiocmget->prev_UART_state_bitmap; | 
|  | icount = &tiocmget->icount; | 
|  | spin_lock(&serial->serial_lock); | 
|  | if ((UART_state_bitmap & B_OVERRUN) != | 
|  | (prev_UART_state_bitmap & B_OVERRUN)) | 
|  | icount->parity++; | 
|  | if ((UART_state_bitmap & B_PARITY) != | 
|  | (prev_UART_state_bitmap & B_PARITY)) | 
|  | icount->parity++; | 
|  | if ((UART_state_bitmap & B_FRAMING) != | 
|  | (prev_UART_state_bitmap & B_FRAMING)) | 
|  | icount->frame++; | 
|  | if ((UART_state_bitmap & B_RING_SIGNAL) && | 
|  | !(prev_UART_state_bitmap & B_RING_SIGNAL)) | 
|  | icount->rng++; | 
|  | if ((UART_state_bitmap & B_BREAK) != | 
|  | (prev_UART_state_bitmap & B_BREAK)) | 
|  | icount->brk++; | 
|  | if ((UART_state_bitmap & B_TX_CARRIER) != | 
|  | (prev_UART_state_bitmap & B_TX_CARRIER)) | 
|  | icount->dsr++; | 
|  | if ((UART_state_bitmap & B_RX_CARRIER) != | 
|  | (prev_UART_state_bitmap & B_RX_CARRIER)) | 
|  | icount->dcd++; | 
|  | tiocmget->prev_UART_state_bitmap = UART_state_bitmap; | 
|  | spin_unlock(&serial->serial_lock); | 
|  | tiocmget->intr_completed = 1; | 
|  | wake_up_interruptible(&tiocmget->waitq); | 
|  | } | 
|  | memset(serial_state_notification, 0, | 
|  | sizeof(struct hso_serial_state_notification)); | 
|  | tiocmget_submit_urb(serial, | 
|  | tiocmget, | 
|  | serial->parent->usb); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * next few functions largely stolen from drivers/serial/serial_core.c | 
|  | */ | 
|  | /* Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change | 
|  | * - mask passed in arg for lines of interest | 
|  | *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) | 
|  | * Caller should use TIOCGICOUNT to see which one it was | 
|  | */ | 
|  | static int | 
|  | hso_wait_modem_status(struct hso_serial *serial, unsigned long arg) | 
|  | { | 
|  | DECLARE_WAITQUEUE(wait, current); | 
|  | struct uart_icount cprev, cnow; | 
|  | struct hso_tiocmget  *tiocmget; | 
|  | int ret; | 
|  |  | 
|  | tiocmget = serial->tiocmget; | 
|  | if (!tiocmget) | 
|  | return -ENOENT; | 
|  | /* | 
|  | * note the counters on entry | 
|  | */ | 
|  | spin_lock_irq(&serial->serial_lock); | 
|  | memcpy(&cprev, &tiocmget->icount, sizeof(struct uart_icount)); | 
|  | spin_unlock_irq(&serial->serial_lock); | 
|  | add_wait_queue(&tiocmget->waitq, &wait); | 
|  | for (;;) { | 
|  | spin_lock_irq(&serial->serial_lock); | 
|  | memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount)); | 
|  | spin_unlock_irq(&serial->serial_lock); | 
|  | set_current_state(TASK_INTERRUPTIBLE); | 
|  | if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || | 
|  | ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || | 
|  | ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd))) { | 
|  | ret = 0; | 
|  | break; | 
|  | } | 
|  | schedule(); | 
|  | /* see if a signal did it */ | 
|  | if (signal_pending(current)) { | 
|  | ret = -ERESTARTSYS; | 
|  | break; | 
|  | } | 
|  | cprev = cnow; | 
|  | } | 
|  | current->state = TASK_RUNNING; | 
|  | remove_wait_queue(&tiocmget->waitq, &wait); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) | 
|  | * Return: write counters to the user passed counter struct | 
|  | * NB: both 1->0 and 0->1 transitions are counted except for | 
|  | *     RI where only 0->1 is counted. | 
|  | */ | 
|  | static int hso_get_count(struct tty_struct *tty, | 
|  | struct serial_icounter_struct *icount) | 
|  | { | 
|  | struct uart_icount cnow; | 
|  | struct hso_serial *serial = tty->driver_data; | 
|  | struct hso_tiocmget  *tiocmget = serial->tiocmget; | 
|  |  | 
|  | memset(icount, 0, sizeof(struct serial_icounter_struct)); | 
|  |  | 
|  | if (!tiocmget) | 
|  | return -ENOENT; | 
|  | spin_lock_irq(&serial->serial_lock); | 
|  | memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount)); | 
|  | spin_unlock_irq(&serial->serial_lock); | 
|  |  | 
|  | icount->cts         = cnow.cts; | 
|  | icount->dsr         = cnow.dsr; | 
|  | icount->rng         = cnow.rng; | 
|  | icount->dcd         = cnow.dcd; | 
|  | icount->rx          = cnow.rx; | 
|  | icount->tx          = cnow.tx; | 
|  | icount->frame       = cnow.frame; | 
|  | icount->overrun     = cnow.overrun; | 
|  | icount->parity      = cnow.parity; | 
|  | icount->brk         = cnow.brk; | 
|  | icount->buf_overrun = cnow.buf_overrun; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int hso_serial_tiocmget(struct tty_struct *tty) | 
|  | { | 
|  | int retval; | 
|  | struct hso_serial *serial = tty->driver_data; | 
|  | struct hso_tiocmget  *tiocmget; | 
|  | u16 UART_state_bitmap; | 
|  |  | 
|  | /* sanity check */ | 
|  | if (!serial) { | 
|  | D1("no tty structures"); | 
|  | return -EINVAL; | 
|  | } | 
|  | spin_lock_irq(&serial->serial_lock); | 
|  | retval = ((serial->rts_state) ? TIOCM_RTS : 0) | | 
|  | ((serial->dtr_state) ? TIOCM_DTR : 0); | 
|  | tiocmget = serial->tiocmget; | 
|  | if (tiocmget) { | 
|  |  | 
|  | UART_state_bitmap = le16_to_cpu( | 
|  | tiocmget->prev_UART_state_bitmap); | 
|  | if (UART_state_bitmap & B_RING_SIGNAL) | 
|  | retval |=  TIOCM_RNG; | 
|  | if (UART_state_bitmap & B_RX_CARRIER) | 
|  | retval |=  TIOCM_CD; | 
|  | if (UART_state_bitmap & B_TX_CARRIER) | 
|  | retval |=  TIOCM_DSR; | 
|  | } | 
|  | spin_unlock_irq(&serial->serial_lock); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static int hso_serial_tiocmset(struct tty_struct *tty, | 
|  | unsigned int set, unsigned int clear) | 
|  | { | 
|  | int val = 0; | 
|  | unsigned long flags; | 
|  | int if_num; | 
|  | struct hso_serial *serial = tty->driver_data; | 
|  | struct usb_interface *interface; | 
|  |  | 
|  | /* sanity check */ | 
|  | if (!serial) { | 
|  | D1("no tty structures"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if ((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM) | 
|  | return -EINVAL; | 
|  |  | 
|  | interface = serial->parent->interface; | 
|  | if_num = interface->cur_altsetting->desc.bInterfaceNumber; | 
|  |  | 
|  | spin_lock_irqsave(&serial->serial_lock, flags); | 
|  | if (set & TIOCM_RTS) | 
|  | serial->rts_state = 1; | 
|  | if (set & TIOCM_DTR) | 
|  | serial->dtr_state = 1; | 
|  |  | 
|  | if (clear & TIOCM_RTS) | 
|  | serial->rts_state = 0; | 
|  | if (clear & TIOCM_DTR) | 
|  | serial->dtr_state = 0; | 
|  |  | 
|  | if (serial->dtr_state) | 
|  | val |= 0x01; | 
|  | if (serial->rts_state) | 
|  | val |= 0x02; | 
|  |  | 
|  | spin_unlock_irqrestore(&serial->serial_lock, flags); | 
|  |  | 
|  | return usb_control_msg(serial->parent->usb, | 
|  | usb_rcvctrlpipe(serial->parent->usb, 0), 0x22, | 
|  | 0x21, val, if_num, NULL, 0, | 
|  | USB_CTRL_SET_TIMEOUT); | 
|  | } | 
|  |  | 
|  | static int hso_serial_ioctl(struct tty_struct *tty, | 
|  | unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | struct hso_serial *serial = tty->driver_data; | 
|  | int ret = 0; | 
|  | D4("IOCTL cmd: %d, arg: %ld", cmd, arg); | 
|  |  | 
|  | if (!serial) | 
|  | return -ENODEV; | 
|  | switch (cmd) { | 
|  | case TIOCMIWAIT: | 
|  | ret = hso_wait_modem_status(serial, arg); | 
|  | break; | 
|  | default: | 
|  | ret = -ENOIOCTLCMD; | 
|  | break; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* starts a transmit */ | 
|  | static void hso_kick_transmit(struct hso_serial *serial) | 
|  | { | 
|  | u8 *temp; | 
|  | unsigned long flags; | 
|  | int res; | 
|  |  | 
|  | spin_lock_irqsave(&serial->serial_lock, flags); | 
|  | if (!serial->tx_buffer_count) | 
|  | goto out; | 
|  |  | 
|  | if (serial->tx_urb_used) | 
|  | goto out; | 
|  |  | 
|  | /* Wakeup USB interface if necessary */ | 
|  | if (hso_get_activity(serial->parent) == -EAGAIN) | 
|  | goto out; | 
|  |  | 
|  | /* Switch pointers around to avoid memcpy */ | 
|  | temp = serial->tx_buffer; | 
|  | serial->tx_buffer = serial->tx_data; | 
|  | serial->tx_data = temp; | 
|  | serial->tx_data_count = serial->tx_buffer_count; | 
|  | serial->tx_buffer_count = 0; | 
|  |  | 
|  | /* If temp is set, it means we switched buffers */ | 
|  | if (temp && serial->write_data) { | 
|  | res = serial->write_data(serial); | 
|  | if (res >= 0) | 
|  | serial->tx_urb_used = 1; | 
|  | } | 
|  | out: | 
|  | spin_unlock_irqrestore(&serial->serial_lock, flags); | 
|  | } | 
|  |  | 
|  | /* make a request (for reading and writing data to muxed serial port) */ | 
|  | static int mux_device_request(struct hso_serial *serial, u8 type, u16 port, | 
|  | struct urb *ctrl_urb, | 
|  | struct usb_ctrlrequest *ctrl_req, | 
|  | u8 *ctrl_urb_data, u32 size) | 
|  | { | 
|  | int result; | 
|  | int pipe; | 
|  |  | 
|  | /* Sanity check */ | 
|  | if (!serial || !ctrl_urb || !ctrl_req) { | 
|  | printk(KERN_ERR "%s: Wrong arguments\n", __func__); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* initialize */ | 
|  | ctrl_req->wValue = 0; | 
|  | ctrl_req->wIndex = cpu_to_le16(hso_port_to_mux(port)); | 
|  | ctrl_req->wLength = cpu_to_le16(size); | 
|  |  | 
|  | if (type == USB_CDC_GET_ENCAPSULATED_RESPONSE) { | 
|  | /* Reading command */ | 
|  | ctrl_req->bRequestType = USB_DIR_IN | | 
|  | USB_TYPE_OPTION_VENDOR | | 
|  | USB_RECIP_INTERFACE; | 
|  | ctrl_req->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE; | 
|  | pipe = usb_rcvctrlpipe(serial->parent->usb, 0); | 
|  | } else { | 
|  | /* Writing command */ | 
|  | ctrl_req->bRequestType = USB_DIR_OUT | | 
|  | USB_TYPE_OPTION_VENDOR | | 
|  | USB_RECIP_INTERFACE; | 
|  | ctrl_req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND; | 
|  | pipe = usb_sndctrlpipe(serial->parent->usb, 0); | 
|  | } | 
|  | /* syslog */ | 
|  | D2("%s command (%02x) len: %d, port: %d", | 
|  | type == USB_CDC_GET_ENCAPSULATED_RESPONSE ? "Read" : "Write", | 
|  | ctrl_req->bRequestType, ctrl_req->wLength, port); | 
|  |  | 
|  | /* Load ctrl urb */ | 
|  | ctrl_urb->transfer_flags = 0; | 
|  | usb_fill_control_urb(ctrl_urb, | 
|  | serial->parent->usb, | 
|  | pipe, | 
|  | (u8 *) ctrl_req, | 
|  | ctrl_urb_data, size, ctrl_callback, serial); | 
|  | /* Send it on merry way */ | 
|  | result = usb_submit_urb(ctrl_urb, GFP_ATOMIC); | 
|  | if (result) { | 
|  | dev_err(&ctrl_urb->dev->dev, | 
|  | "%s failed submit ctrl_urb %d type %d\n", __func__, | 
|  | result, type); | 
|  | return result; | 
|  | } | 
|  |  | 
|  | /* done */ | 
|  | return size; | 
|  | } | 
|  |  | 
|  | /* called by intr_callback when read occurs */ | 
|  | static int hso_mux_serial_read(struct hso_serial *serial) | 
|  | { | 
|  | if (!serial) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* clean data */ | 
|  | memset(serial->rx_data[0], 0, CTRL_URB_RX_SIZE); | 
|  | /* make the request */ | 
|  |  | 
|  | if (serial->num_rx_urbs != 1) { | 
|  | dev_err(&serial->parent->interface->dev, | 
|  | "ERROR: mux'd reads with multiple buffers " | 
|  | "not possible\n"); | 
|  | return 0; | 
|  | } | 
|  | return mux_device_request(serial, | 
|  | USB_CDC_GET_ENCAPSULATED_RESPONSE, | 
|  | serial->parent->port_spec & HSO_PORT_MASK, | 
|  | serial->rx_urb[0], | 
|  | &serial->ctrl_req_rx, | 
|  | serial->rx_data[0], serial->rx_data_length); | 
|  | } | 
|  |  | 
|  | /* used for muxed serial port callback (muxed serial read) */ | 
|  | static void intr_callback(struct urb *urb) | 
|  | { | 
|  | struct hso_shared_int *shared_int = urb->context; | 
|  | struct hso_serial *serial; | 
|  | unsigned char *port_req; | 
|  | int status = urb->status; | 
|  | int i; | 
|  |  | 
|  | usb_mark_last_busy(urb->dev); | 
|  |  | 
|  | /* sanity check */ | 
|  | if (!shared_int) | 
|  | return; | 
|  |  | 
|  | /* status check */ | 
|  | if (status) { | 
|  | handle_usb_error(status, __func__, NULL); | 
|  | return; | 
|  | } | 
|  | D4("\n--- Got intr callback 0x%02X ---", status); | 
|  |  | 
|  | /* what request? */ | 
|  | port_req = urb->transfer_buffer; | 
|  | D4(" port_req = 0x%.2X\n", *port_req); | 
|  | /* loop over all muxed ports to find the one sending this */ | 
|  | for (i = 0; i < 8; i++) { | 
|  | /* max 8 channels on MUX */ | 
|  | if (*port_req & (1 << i)) { | 
|  | serial = get_serial_by_shared_int_and_type(shared_int, | 
|  | (1 << i)); | 
|  | if (serial != NULL) { | 
|  | D1("Pending read interrupt on port %d\n", i); | 
|  | spin_lock(&serial->serial_lock); | 
|  | if (serial->rx_state == RX_IDLE && | 
|  | serial->port.count > 0) { | 
|  | /* Setup and send a ctrl req read on | 
|  | * port i */ | 
|  | if (!serial->rx_urb_filled[0]) { | 
|  | serial->rx_state = RX_SENT; | 
|  | hso_mux_serial_read(serial); | 
|  | } else | 
|  | serial->rx_state = RX_PENDING; | 
|  | } else { | 
|  | D1("Already a read pending on " | 
|  | "port %d or port not open\n", i); | 
|  | } | 
|  | spin_unlock(&serial->serial_lock); | 
|  | } | 
|  | } | 
|  | } | 
|  | /* Resubmit interrupt urb */ | 
|  | hso_mux_submit_intr_urb(shared_int, urb->dev, GFP_ATOMIC); | 
|  | } | 
|  |  | 
|  | /* called for writing to muxed serial port */ | 
|  | static int hso_mux_serial_write_data(struct hso_serial *serial) | 
|  | { | 
|  | if (NULL == serial) | 
|  | return -EINVAL; | 
|  |  | 
|  | return mux_device_request(serial, | 
|  | USB_CDC_SEND_ENCAPSULATED_COMMAND, | 
|  | serial->parent->port_spec & HSO_PORT_MASK, | 
|  | serial->tx_urb, | 
|  | &serial->ctrl_req_tx, | 
|  | serial->tx_data, serial->tx_data_count); | 
|  | } | 
|  |  | 
|  | /* write callback for Diag and CS port */ | 
|  | static void hso_std_serial_write_bulk_callback(struct urb *urb) | 
|  | { | 
|  | struct hso_serial *serial = urb->context; | 
|  | int status = urb->status; | 
|  |  | 
|  | /* sanity check */ | 
|  | if (!serial) { | 
|  | D1("serial == NULL"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | spin_lock(&serial->serial_lock); | 
|  | serial->tx_urb_used = 0; | 
|  | spin_unlock(&serial->serial_lock); | 
|  | if (status) { | 
|  | handle_usb_error(status, __func__, serial->parent); | 
|  | return; | 
|  | } | 
|  | hso_put_activity(serial->parent); | 
|  | tty_port_tty_wakeup(&serial->port); | 
|  | hso_kick_transmit(serial); | 
|  |  | 
|  | D1(" "); | 
|  | } | 
|  |  | 
|  | /* called for writing diag or CS serial port */ | 
|  | static int hso_std_serial_write_data(struct hso_serial *serial) | 
|  | { | 
|  | int count = serial->tx_data_count; | 
|  | int result; | 
|  |  | 
|  | usb_fill_bulk_urb(serial->tx_urb, | 
|  | serial->parent->usb, | 
|  | usb_sndbulkpipe(serial->parent->usb, | 
|  | serial->out_endp-> | 
|  | bEndpointAddress & 0x7F), | 
|  | serial->tx_data, serial->tx_data_count, | 
|  | hso_std_serial_write_bulk_callback, serial); | 
|  |  | 
|  | result = usb_submit_urb(serial->tx_urb, GFP_ATOMIC); | 
|  | if (result) { | 
|  | dev_warn(&serial->parent->usb->dev, | 
|  | "Failed to submit urb - res %d\n", result); | 
|  | return result; | 
|  | } | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | /* callback after read or write on muxed serial port */ | 
|  | static void ctrl_callback(struct urb *urb) | 
|  | { | 
|  | struct hso_serial *serial = urb->context; | 
|  | struct usb_ctrlrequest *req; | 
|  | int status = urb->status; | 
|  |  | 
|  | /* sanity check */ | 
|  | if (!serial) | 
|  | return; | 
|  |  | 
|  | spin_lock(&serial->serial_lock); | 
|  | serial->tx_urb_used = 0; | 
|  | spin_unlock(&serial->serial_lock); | 
|  | if (status) { | 
|  | handle_usb_error(status, __func__, serial->parent); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* what request? */ | 
|  | req = (struct usb_ctrlrequest *)(urb->setup_packet); | 
|  | D4("\n--- Got muxed ctrl callback 0x%02X ---", status); | 
|  | D4("Actual length of urb = %d\n", urb->actual_length); | 
|  | DUMP1(urb->transfer_buffer, urb->actual_length); | 
|  |  | 
|  | if (req->bRequestType == | 
|  | (USB_DIR_IN | USB_TYPE_OPTION_VENDOR | USB_RECIP_INTERFACE)) { | 
|  | /* response to a read command */ | 
|  | serial->rx_urb_filled[0] = 1; | 
|  | spin_lock(&serial->serial_lock); | 
|  | put_rxbuf_data_and_resubmit_ctrl_urb(serial); | 
|  | spin_unlock(&serial->serial_lock); | 
|  | } else { | 
|  | hso_put_activity(serial->parent); | 
|  | tty_port_tty_wakeup(&serial->port); | 
|  | /* response to a write command */ | 
|  | hso_kick_transmit(serial); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* handle RX data for serial port */ | 
|  | static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial) | 
|  | { | 
|  | struct tty_struct *tty; | 
|  | int count; | 
|  |  | 
|  | /* Sanity check */ | 
|  | if (urb == NULL || serial == NULL) { | 
|  | D1("serial = NULL"); | 
|  | return -2; | 
|  | } | 
|  |  | 
|  | tty = tty_port_tty_get(&serial->port); | 
|  |  | 
|  | if (tty && test_bit(TTY_THROTTLED, &tty->flags)) { | 
|  | tty_kref_put(tty); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* Push data to tty */ | 
|  | D1("data to push to tty"); | 
|  | count = tty_buffer_request_room(&serial->port, urb->actual_length); | 
|  | if (count >= urb->actual_length) { | 
|  | tty_insert_flip_string(&serial->port, urb->transfer_buffer, | 
|  | urb->actual_length); | 
|  | tty_flip_buffer_push(&serial->port); | 
|  | } else { | 
|  | dev_warn(&serial->parent->usb->dev, | 
|  | "dropping data, %d bytes lost\n", urb->actual_length); | 
|  | } | 
|  |  | 
|  | tty_kref_put(tty); | 
|  |  | 
|  | serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* Base driver functions */ | 
|  |  | 
|  | static void hso_log_port(struct hso_device *hso_dev) | 
|  | { | 
|  | char *port_type; | 
|  | char port_dev[20]; | 
|  |  | 
|  | switch (hso_dev->port_spec & HSO_PORT_MASK) { | 
|  | case HSO_PORT_CONTROL: | 
|  | port_type = "Control"; | 
|  | break; | 
|  | case HSO_PORT_APP: | 
|  | port_type = "Application"; | 
|  | break; | 
|  | case HSO_PORT_GPS: | 
|  | port_type = "GPS"; | 
|  | break; | 
|  | case HSO_PORT_GPS_CONTROL: | 
|  | port_type = "GPS control"; | 
|  | break; | 
|  | case HSO_PORT_APP2: | 
|  | port_type = "Application2"; | 
|  | break; | 
|  | case HSO_PORT_PCSC: | 
|  | port_type = "PCSC"; | 
|  | break; | 
|  | case HSO_PORT_DIAG: | 
|  | port_type = "Diagnostic"; | 
|  | break; | 
|  | case HSO_PORT_DIAG2: | 
|  | port_type = "Diagnostic2"; | 
|  | break; | 
|  | case HSO_PORT_MODEM: | 
|  | port_type = "Modem"; | 
|  | break; | 
|  | case HSO_PORT_NETWORK: | 
|  | port_type = "Network"; | 
|  | break; | 
|  | default: | 
|  | port_type = "Unknown"; | 
|  | break; | 
|  | } | 
|  | if ((hso_dev->port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) { | 
|  | sprintf(port_dev, "%s", dev2net(hso_dev)->net->name); | 
|  | } else | 
|  | sprintf(port_dev, "/dev/%s%d", tty_filename, | 
|  | dev2ser(hso_dev)->minor); | 
|  |  | 
|  | dev_dbg(&hso_dev->interface->dev, "HSO: Found %s port %s\n", | 
|  | port_type, port_dev); | 
|  | } | 
|  |  | 
|  | static int hso_start_net_device(struct hso_device *hso_dev) | 
|  | { | 
|  | int i, result = 0; | 
|  | struct hso_net *hso_net = dev2net(hso_dev); | 
|  |  | 
|  | if (!hso_net) | 
|  | return -ENODEV; | 
|  |  | 
|  | /* send URBs for all read buffers */ | 
|  | for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) { | 
|  |  | 
|  | /* Prep a receive URB */ | 
|  | usb_fill_bulk_urb(hso_net->mux_bulk_rx_urb_pool[i], | 
|  | hso_dev->usb, | 
|  | usb_rcvbulkpipe(hso_dev->usb, | 
|  | hso_net->in_endp-> | 
|  | bEndpointAddress & 0x7F), | 
|  | hso_net->mux_bulk_rx_buf_pool[i], | 
|  | MUX_BULK_RX_BUF_SIZE, read_bulk_callback, | 
|  | hso_net); | 
|  |  | 
|  | /* Put it out there so the device can send us stuff */ | 
|  | result = usb_submit_urb(hso_net->mux_bulk_rx_urb_pool[i], | 
|  | GFP_NOIO); | 
|  | if (result) | 
|  | dev_warn(&hso_dev->usb->dev, | 
|  | "%s failed mux_bulk_rx_urb[%d] %d\n", __func__, | 
|  | i, result); | 
|  | } | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static int hso_stop_net_device(struct hso_device *hso_dev) | 
|  | { | 
|  | int i; | 
|  | struct hso_net *hso_net = dev2net(hso_dev); | 
|  |  | 
|  | if (!hso_net) | 
|  | return -ENODEV; | 
|  |  | 
|  | for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) { | 
|  | if (hso_net->mux_bulk_rx_urb_pool[i]) | 
|  | usb_kill_urb(hso_net->mux_bulk_rx_urb_pool[i]); | 
|  |  | 
|  | } | 
|  | if (hso_net->mux_bulk_tx_urb) | 
|  | usb_kill_urb(hso_net->mux_bulk_tx_urb); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags) | 
|  | { | 
|  | int i, result = 0; | 
|  | struct hso_serial *serial = dev2ser(hso_dev); | 
|  |  | 
|  | if (!serial) | 
|  | return -ENODEV; | 
|  |  | 
|  | /* If it is not the MUX port fill in and submit a bulk urb (already | 
|  | * allocated in hso_serial_start) */ | 
|  | if (!(serial->parent->port_spec & HSO_INTF_MUX)) { | 
|  | for (i = 0; i < serial->num_rx_urbs; i++) { | 
|  | usb_fill_bulk_urb(serial->rx_urb[i], | 
|  | serial->parent->usb, | 
|  | usb_rcvbulkpipe(serial->parent->usb, | 
|  | serial->in_endp-> | 
|  | bEndpointAddress & | 
|  | 0x7F), | 
|  | serial->rx_data[i], | 
|  | serial->rx_data_length, | 
|  | hso_std_serial_read_bulk_callback, | 
|  | serial); | 
|  | result = usb_submit_urb(serial->rx_urb[i], flags); | 
|  | if (result) { | 
|  | dev_warn(&serial->parent->usb->dev, | 
|  | "Failed to submit urb - res %d\n", | 
|  | result); | 
|  | break; | 
|  | } | 
|  | } | 
|  | } else { | 
|  | mutex_lock(&serial->shared_int->shared_int_lock); | 
|  | if (!serial->shared_int->use_count) { | 
|  | result = | 
|  | hso_mux_submit_intr_urb(serial->shared_int, | 
|  | hso_dev->usb, flags); | 
|  | } | 
|  | serial->shared_int->use_count++; | 
|  | mutex_unlock(&serial->shared_int->shared_int_lock); | 
|  | } | 
|  | if (serial->tiocmget) | 
|  | tiocmget_submit_urb(serial, | 
|  | serial->tiocmget, | 
|  | serial->parent->usb); | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static int hso_stop_serial_device(struct hso_device *hso_dev) | 
|  | { | 
|  | int i; | 
|  | struct hso_serial *serial = dev2ser(hso_dev); | 
|  | struct hso_tiocmget  *tiocmget; | 
|  |  | 
|  | if (!serial) | 
|  | return -ENODEV; | 
|  |  | 
|  | for (i = 0; i < serial->num_rx_urbs; i++) { | 
|  | if (serial->rx_urb[i]) { | 
|  | usb_kill_urb(serial->rx_urb[i]); | 
|  | serial->rx_urb_filled[i] = 0; | 
|  | } | 
|  | } | 
|  | serial->curr_rx_urb_idx = 0; | 
|  |  | 
|  | if (serial->tx_urb) | 
|  | usb_kill_urb(serial->tx_urb); | 
|  |  | 
|  | if (serial->shared_int) { | 
|  | mutex_lock(&serial->shared_int->shared_int_lock); | 
|  | if (serial->shared_int->use_count && | 
|  | (--serial->shared_int->use_count == 0)) { | 
|  | struct urb *urb; | 
|  |  | 
|  | urb = serial->shared_int->shared_intr_urb; | 
|  | if (urb) | 
|  | usb_kill_urb(urb); | 
|  | } | 
|  | mutex_unlock(&serial->shared_int->shared_int_lock); | 
|  | } | 
|  | tiocmget = serial->tiocmget; | 
|  | if (tiocmget) { | 
|  | wake_up_interruptible(&tiocmget->waitq); | 
|  | usb_kill_urb(tiocmget->urb); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void hso_serial_tty_unregister(struct hso_serial *serial) | 
|  | { | 
|  | tty_unregister_device(tty_drv, serial->minor); | 
|  | } | 
|  |  | 
|  | static void hso_serial_common_free(struct hso_serial *serial) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < serial->num_rx_urbs; i++) { | 
|  | /* unlink and free RX URB */ | 
|  | usb_free_urb(serial->rx_urb[i]); | 
|  | /* free the RX buffer */ | 
|  | kfree(serial->rx_data[i]); | 
|  | } | 
|  |  | 
|  | /* unlink and free TX URB */ | 
|  | usb_free_urb(serial->tx_urb); | 
|  | kfree(serial->tx_buffer); | 
|  | kfree(serial->tx_data); | 
|  | tty_port_destroy(&serial->port); | 
|  | } | 
|  |  | 
|  | static int hso_serial_common_create(struct hso_serial *serial, int num_urbs, | 
|  | int rx_size, int tx_size) | 
|  | { | 
|  | struct device *dev; | 
|  | int minor; | 
|  | int i; | 
|  |  | 
|  | tty_port_init(&serial->port); | 
|  |  | 
|  | minor = get_free_serial_index(); | 
|  | if (minor < 0) | 
|  | goto exit; | 
|  |  | 
|  | /* register our minor number */ | 
|  | serial->parent->dev = tty_port_register_device_attr(&serial->port, | 
|  | tty_drv, minor, &serial->parent->interface->dev, | 
|  | serial->parent, hso_serial_dev_groups); | 
|  | dev = serial->parent->dev; | 
|  |  | 
|  | /* fill in specific data for later use */ | 
|  | serial->minor = minor; | 
|  | serial->magic = HSO_SERIAL_MAGIC; | 
|  | spin_lock_init(&serial->serial_lock); | 
|  | serial->num_rx_urbs = num_urbs; | 
|  |  | 
|  | /* RX, allocate urb and initialize */ | 
|  |  | 
|  | /* prepare our RX buffer */ | 
|  | serial->rx_data_length = rx_size; | 
|  | for (i = 0; i < serial->num_rx_urbs; i++) { | 
|  | serial->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL); | 
|  | if (!serial->rx_urb[i]) { | 
|  | dev_err(dev, "Could not allocate urb?\n"); | 
|  | goto exit; | 
|  | } | 
|  | serial->rx_urb[i]->transfer_buffer = NULL; | 
|  | serial->rx_urb[i]->transfer_buffer_length = 0; | 
|  | serial->rx_data[i] = kzalloc(serial->rx_data_length, | 
|  | GFP_KERNEL); | 
|  | if (!serial->rx_data[i]) | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | /* TX, allocate urb and initialize */ | 
|  | serial->tx_urb = usb_alloc_urb(0, GFP_KERNEL); | 
|  | if (!serial->tx_urb) { | 
|  | dev_err(dev, "Could not allocate urb?\n"); | 
|  | goto exit; | 
|  | } | 
|  | serial->tx_urb->transfer_buffer = NULL; | 
|  | serial->tx_urb->transfer_buffer_length = 0; | 
|  | /* prepare our TX buffer */ | 
|  | serial->tx_data_count = 0; | 
|  | serial->tx_buffer_count = 0; | 
|  | serial->tx_data_length = tx_size; | 
|  | serial->tx_data = kzalloc(serial->tx_data_length, GFP_KERNEL); | 
|  | if (!serial->tx_data) | 
|  | goto exit; | 
|  |  | 
|  | serial->tx_buffer = kzalloc(serial->tx_data_length, GFP_KERNEL); | 
|  | if (!serial->tx_buffer) | 
|  | goto exit; | 
|  |  | 
|  | return 0; | 
|  | exit: | 
|  | hso_serial_tty_unregister(serial); | 
|  | hso_serial_common_free(serial); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* Creates a general hso device */ | 
|  | static struct hso_device *hso_create_device(struct usb_interface *intf, | 
|  | int port_spec) | 
|  | { | 
|  | struct hso_device *hso_dev; | 
|  |  | 
|  | hso_dev = kzalloc(sizeof(*hso_dev), GFP_ATOMIC); | 
|  | if (!hso_dev) | 
|  | return NULL; | 
|  |  | 
|  | hso_dev->port_spec = port_spec; | 
|  | hso_dev->usb = interface_to_usbdev(intf); | 
|  | hso_dev->interface = intf; | 
|  | kref_init(&hso_dev->ref); | 
|  | mutex_init(&hso_dev->mutex); | 
|  |  | 
|  | INIT_WORK(&hso_dev->async_get_intf, async_get_intf); | 
|  | INIT_WORK(&hso_dev->async_put_intf, async_put_intf); | 
|  |  | 
|  | return hso_dev; | 
|  | } | 
|  |  | 
|  | /* Removes a network device in the network device table */ | 
|  | static int remove_net_device(struct hso_device *hso_dev) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < HSO_MAX_NET_DEVICES; i++) { | 
|  | if (network_table[i] == hso_dev) { | 
|  | network_table[i] = NULL; | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (i == HSO_MAX_NET_DEVICES) | 
|  | return -1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Frees our network device */ | 
|  | static void hso_free_net_device(struct hso_device *hso_dev) | 
|  | { | 
|  | int i; | 
|  | struct hso_net *hso_net = dev2net(hso_dev); | 
|  |  | 
|  | if (!hso_net) | 
|  | return; | 
|  |  | 
|  | remove_net_device(hso_net->parent); | 
|  |  | 
|  | if (hso_net->net) | 
|  | unregister_netdev(hso_net->net); | 
|  |  | 
|  | /* start freeing */ | 
|  | for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) { | 
|  | usb_free_urb(hso_net->mux_bulk_rx_urb_pool[i]); | 
|  | kfree(hso_net->mux_bulk_rx_buf_pool[i]); | 
|  | hso_net->mux_bulk_rx_buf_pool[i] = NULL; | 
|  | } | 
|  | usb_free_urb(hso_net->mux_bulk_tx_urb); | 
|  | kfree(hso_net->mux_bulk_tx_buf); | 
|  | hso_net->mux_bulk_tx_buf = NULL; | 
|  |  | 
|  | if (hso_net->net) | 
|  | free_netdev(hso_net->net); | 
|  |  | 
|  | kfree(hso_dev); | 
|  | } | 
|  |  | 
|  | static const struct net_device_ops hso_netdev_ops = { | 
|  | .ndo_open	= hso_net_open, | 
|  | .ndo_stop	= hso_net_close, | 
|  | .ndo_start_xmit = hso_net_start_xmit, | 
|  | .ndo_tx_timeout = hso_net_tx_timeout, | 
|  | }; | 
|  |  | 
|  | /* initialize the network interface */ | 
|  | static void hso_net_init(struct net_device *net) | 
|  | { | 
|  | struct hso_net *hso_net = netdev_priv(net); | 
|  |  | 
|  | D1("sizeof hso_net is %d", (int)sizeof(*hso_net)); | 
|  |  | 
|  | /* fill in the other fields */ | 
|  | net->netdev_ops = &hso_netdev_ops; | 
|  | net->watchdog_timeo = HSO_NET_TX_TIMEOUT; | 
|  | net->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST; | 
|  | net->type = ARPHRD_NONE; | 
|  | net->mtu = DEFAULT_MTU - 14; | 
|  | net->tx_queue_len = 10; | 
|  | net->ethtool_ops = &ops; | 
|  |  | 
|  | /* and initialize the semaphore */ | 
|  | spin_lock_init(&hso_net->net_lock); | 
|  | } | 
|  |  | 
|  | /* Adds a network device in the network device table */ | 
|  | static int add_net_device(struct hso_device *hso_dev) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < HSO_MAX_NET_DEVICES; i++) { | 
|  | if (network_table[i] == NULL) { | 
|  | network_table[i] = hso_dev; | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (i == HSO_MAX_NET_DEVICES) | 
|  | return -1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int hso_rfkill_set_block(void *data, bool blocked) | 
|  | { | 
|  | struct hso_device *hso_dev = data; | 
|  | int enabled = !blocked; | 
|  | int rv; | 
|  |  | 
|  | mutex_lock(&hso_dev->mutex); | 
|  | if (hso_dev->usb_gone) | 
|  | rv = 0; | 
|  | else | 
|  | rv = usb_control_msg(hso_dev->usb, usb_rcvctrlpipe(hso_dev->usb, 0), | 
|  | enabled ? 0x82 : 0x81, 0x40, 0, 0, NULL, 0, | 
|  | USB_CTRL_SET_TIMEOUT); | 
|  | mutex_unlock(&hso_dev->mutex); | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | static const struct rfkill_ops hso_rfkill_ops = { | 
|  | .set_block = hso_rfkill_set_block, | 
|  | }; | 
|  |  | 
|  | /* Creates and sets up everything for rfkill */ | 
|  | static void hso_create_rfkill(struct hso_device *hso_dev, | 
|  | struct usb_interface *interface) | 
|  | { | 
|  | struct hso_net *hso_net = dev2net(hso_dev); | 
|  | struct device *dev = &hso_net->net->dev; | 
|  | static u32 rfkill_counter; | 
|  |  | 
|  | snprintf(hso_net->name, sizeof(hso_net->name), "hso-%d", | 
|  | rfkill_counter++); | 
|  |  | 
|  | hso_net->rfkill = rfkill_alloc(hso_net->name, | 
|  | &interface_to_usbdev(interface)->dev, | 
|  | RFKILL_TYPE_WWAN, | 
|  | &hso_rfkill_ops, hso_dev); | 
|  | if (!hso_net->rfkill) { | 
|  | dev_err(dev, "%s - Out of memory\n", __func__); | 
|  | return; | 
|  | } | 
|  | if (rfkill_register(hso_net->rfkill) < 0) { | 
|  | rfkill_destroy(hso_net->rfkill); | 
|  | hso_net->rfkill = NULL; | 
|  | dev_err(dev, "%s - Failed to register rfkill\n", __func__); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | static struct device_type hso_type = { | 
|  | .name	= "wwan", | 
|  | }; | 
|  |  | 
|  | /* Creates our network device */ | 
|  | static struct hso_device *hso_create_net_device(struct usb_interface *interface, | 
|  | int port_spec) | 
|  | { | 
|  | int result, i; | 
|  | struct net_device *net; | 
|  | struct hso_net *hso_net; | 
|  | struct hso_device *hso_dev; | 
|  |  | 
|  | hso_dev = hso_create_device(interface, port_spec); | 
|  | if (!hso_dev) | 
|  | return NULL; | 
|  |  | 
|  | /* allocate our network device, then we can put in our private data */ | 
|  | /* call hso_net_init to do the basic initialization */ | 
|  | net = alloc_netdev(sizeof(struct hso_net), "hso%d", NET_NAME_UNKNOWN, | 
|  | hso_net_init); | 
|  | if (!net) { | 
|  | dev_err(&interface->dev, "Unable to create ethernet device\n"); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | hso_net = netdev_priv(net); | 
|  |  | 
|  | hso_dev->port_data.dev_net = hso_net; | 
|  | hso_net->net = net; | 
|  | hso_net->parent = hso_dev; | 
|  |  | 
|  | hso_net->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK, | 
|  | USB_DIR_IN); | 
|  | if (!hso_net->in_endp) { | 
|  | dev_err(&interface->dev, "Can't find BULK IN endpoint\n"); | 
|  | goto exit; | 
|  | } | 
|  | hso_net->out_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK, | 
|  | USB_DIR_OUT); | 
|  | if (!hso_net->out_endp) { | 
|  | dev_err(&interface->dev, "Can't find BULK OUT endpoint\n"); | 
|  | goto exit; | 
|  | } | 
|  | SET_NETDEV_DEV(net, &interface->dev); | 
|  | SET_NETDEV_DEVTYPE(net, &hso_type); | 
|  |  | 
|  | /* registering our net device */ | 
|  | result = register_netdev(net); | 
|  | if (result) { | 
|  | dev_err(&interface->dev, "Failed to register device\n"); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | /* start allocating */ | 
|  | for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) { | 
|  | hso_net->mux_bulk_rx_urb_pool[i] = usb_alloc_urb(0, GFP_KERNEL); | 
|  | if (!hso_net->mux_bulk_rx_urb_pool[i]) { | 
|  | dev_err(&interface->dev, "Could not allocate rx urb\n"); | 
|  | goto exit; | 
|  | } | 
|  | hso_net->mux_bulk_rx_buf_pool[i] = kzalloc(MUX_BULK_RX_BUF_SIZE, | 
|  | GFP_KERNEL); | 
|  | if (!hso_net->mux_bulk_rx_buf_pool[i]) | 
|  | goto exit; | 
|  | } | 
|  | hso_net->mux_bulk_tx_urb = usb_alloc_urb(0, GFP_KERNEL); | 
|  | if (!hso_net->mux_bulk_tx_urb) { | 
|  | dev_err(&interface->dev, "Could not allocate tx urb\n"); | 
|  | goto exit; | 
|  | } | 
|  | hso_net->mux_bulk_tx_buf = kzalloc(MUX_BULK_TX_BUF_SIZE, GFP_KERNEL); | 
|  | if (!hso_net->mux_bulk_tx_buf) | 
|  | goto exit; | 
|  |  | 
|  | add_net_device(hso_dev); | 
|  |  | 
|  | hso_log_port(hso_dev); | 
|  |  | 
|  | hso_create_rfkill(hso_dev, interface); | 
|  |  | 
|  | return hso_dev; | 
|  | exit: | 
|  | hso_free_net_device(hso_dev); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static void hso_free_tiomget(struct hso_serial *serial) | 
|  | { | 
|  | struct hso_tiocmget *tiocmget; | 
|  | if (!serial) | 
|  | return; | 
|  | tiocmget = serial->tiocmget; | 
|  | if (tiocmget) { | 
|  | usb_free_urb(tiocmget->urb); | 
|  | tiocmget->urb = NULL; | 
|  | serial->tiocmget = NULL; | 
|  | kfree(tiocmget); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Frees an AT channel ( goes for both mux and non-mux ) */ | 
|  | static void hso_free_serial_device(struct hso_device *hso_dev) | 
|  | { | 
|  | struct hso_serial *serial = dev2ser(hso_dev); | 
|  |  | 
|  | if (!serial) | 
|  | return; | 
|  |  | 
|  | hso_serial_common_free(serial); | 
|  |  | 
|  | if (serial->shared_int) { | 
|  | mutex_lock(&serial->shared_int->shared_int_lock); | 
|  | if (--serial->shared_int->ref_count == 0) | 
|  | hso_free_shared_int(serial->shared_int); | 
|  | else | 
|  | mutex_unlock(&serial->shared_int->shared_int_lock); | 
|  | } | 
|  | hso_free_tiomget(serial); | 
|  | kfree(serial); | 
|  | kfree(hso_dev); | 
|  | } | 
|  |  | 
|  | /* Creates a bulk AT channel */ | 
|  | static struct hso_device *hso_create_bulk_serial_device( | 
|  | struct usb_interface *interface, int port) | 
|  | { | 
|  | struct hso_device *hso_dev; | 
|  | struct hso_serial *serial; | 
|  | int num_urbs; | 
|  | struct hso_tiocmget *tiocmget; | 
|  |  | 
|  | hso_dev = hso_create_device(interface, port); | 
|  | if (!hso_dev) | 
|  | return NULL; | 
|  |  | 
|  | serial = kzalloc(sizeof(*serial), GFP_KERNEL); | 
|  | if (!serial) | 
|  | goto exit; | 
|  |  | 
|  | serial->parent = hso_dev; | 
|  | hso_dev->port_data.dev_serial = serial; | 
|  |  | 
|  | if ((port & HSO_PORT_MASK) == HSO_PORT_MODEM) { | 
|  | num_urbs = 2; | 
|  | serial->tiocmget = kzalloc(sizeof(struct hso_tiocmget), | 
|  | GFP_KERNEL); | 
|  | /* it isn't going to break our heart if serial->tiocmget | 
|  | *  allocation fails don't bother checking this. | 
|  | */ | 
|  | if (serial->tiocmget) { | 
|  | tiocmget = serial->tiocmget; | 
|  | tiocmget->urb = usb_alloc_urb(0, GFP_KERNEL); | 
|  | if (tiocmget->urb) { | 
|  | mutex_init(&tiocmget->mutex); | 
|  | init_waitqueue_head(&tiocmget->waitq); | 
|  | tiocmget->endp = hso_get_ep( | 
|  | interface, | 
|  | USB_ENDPOINT_XFER_INT, | 
|  | USB_DIR_IN); | 
|  | } else | 
|  | hso_free_tiomget(serial); | 
|  | } | 
|  | } | 
|  | else | 
|  | num_urbs = 1; | 
|  |  | 
|  | if (hso_serial_common_create(serial, num_urbs, BULK_URB_RX_SIZE, | 
|  | BULK_URB_TX_SIZE)) | 
|  | goto exit; | 
|  |  | 
|  | serial->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK, | 
|  | USB_DIR_IN); | 
|  | if (!serial->in_endp) { | 
|  | dev_err(&interface->dev, "Failed to find BULK IN ep\n"); | 
|  | goto exit2; | 
|  | } | 
|  |  | 
|  | if (! | 
|  | (serial->out_endp = | 
|  | hso_get_ep(interface, USB_ENDPOINT_XFER_BULK, USB_DIR_OUT))) { | 
|  | dev_err(&interface->dev, "Failed to find BULK IN ep\n"); | 
|  | goto exit2; | 
|  | } | 
|  |  | 
|  | serial->write_data = hso_std_serial_write_data; | 
|  |  | 
|  | /* and record this serial */ | 
|  | set_serial_by_index(serial->minor, serial); | 
|  |  | 
|  | /* setup the proc dirs and files if needed */ | 
|  | hso_log_port(hso_dev); | 
|  |  | 
|  | /* done, return it */ | 
|  | return hso_dev; | 
|  |  | 
|  | exit2: | 
|  | hso_serial_tty_unregister(serial); | 
|  | hso_serial_common_free(serial); | 
|  | exit: | 
|  | hso_free_tiomget(serial); | 
|  | kfree(serial); | 
|  | kfree(hso_dev); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* Creates a multiplexed AT channel */ | 
|  | static | 
|  | struct hso_device *hso_create_mux_serial_device(struct usb_interface *interface, | 
|  | int port, | 
|  | struct hso_shared_int *mux) | 
|  | { | 
|  | struct hso_device *hso_dev; | 
|  | struct hso_serial *serial; | 
|  | int port_spec; | 
|  |  | 
|  | port_spec = HSO_INTF_MUX; | 
|  | port_spec &= ~HSO_PORT_MASK; | 
|  |  | 
|  | port_spec |= hso_mux_to_port(port); | 
|  | if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NO_PORT) | 
|  | return NULL; | 
|  |  | 
|  | hso_dev = hso_create_device(interface, port_spec); | 
|  | if (!hso_dev) | 
|  | return NULL; | 
|  |  | 
|  | serial = kzalloc(sizeof(*serial), GFP_KERNEL); | 
|  | if (!serial) | 
|  | goto exit; | 
|  |  | 
|  | hso_dev->port_data.dev_serial = serial; | 
|  | serial->parent = hso_dev; | 
|  |  | 
|  | if (hso_serial_common_create | 
|  | (serial, 1, CTRL_URB_RX_SIZE, CTRL_URB_TX_SIZE)) | 
|  | goto exit; | 
|  |  | 
|  | serial->tx_data_length--; | 
|  | serial->write_data = hso_mux_serial_write_data; | 
|  |  | 
|  | serial->shared_int = mux; | 
|  | mutex_lock(&serial->shared_int->shared_int_lock); | 
|  | serial->shared_int->ref_count++; | 
|  | mutex_unlock(&serial->shared_int->shared_int_lock); | 
|  |  | 
|  | /* and record this serial */ | 
|  | set_serial_by_index(serial->minor, serial); | 
|  |  | 
|  | /* setup the proc dirs and files if needed */ | 
|  | hso_log_port(hso_dev); | 
|  |  | 
|  | /* done, return it */ | 
|  | return hso_dev; | 
|  |  | 
|  | exit: | 
|  | if (serial) { | 
|  | tty_unregister_device(tty_drv, serial->minor); | 
|  | kfree(serial); | 
|  | } | 
|  | kfree(hso_dev); | 
|  | return NULL; | 
|  |  | 
|  | } | 
|  |  | 
|  | static void hso_free_shared_int(struct hso_shared_int *mux) | 
|  | { | 
|  | usb_free_urb(mux->shared_intr_urb); | 
|  | kfree(mux->shared_intr_buf); | 
|  | mutex_unlock(&mux->shared_int_lock); | 
|  | kfree(mux); | 
|  | } | 
|  |  | 
|  | static | 
|  | struct hso_shared_int *hso_create_shared_int(struct usb_interface *interface) | 
|  | { | 
|  | struct hso_shared_int *mux = kzalloc(sizeof(*mux), GFP_KERNEL); | 
|  |  | 
|  | if (!mux) | 
|  | return NULL; | 
|  |  | 
|  | mux->intr_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_INT, | 
|  | USB_DIR_IN); | 
|  | if (!mux->intr_endp) { | 
|  | dev_err(&interface->dev, "Can't find INT IN endpoint\n"); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | mux->shared_intr_urb = usb_alloc_urb(0, GFP_KERNEL); | 
|  | if (!mux->shared_intr_urb) { | 
|  | dev_err(&interface->dev, "Could not allocate intr urb?\n"); | 
|  | goto exit; | 
|  | } | 
|  | mux->shared_intr_buf = | 
|  | kzalloc(le16_to_cpu(mux->intr_endp->wMaxPacketSize), | 
|  | GFP_KERNEL); | 
|  | if (!mux->shared_intr_buf) | 
|  | goto exit; | 
|  |  | 
|  | mutex_init(&mux->shared_int_lock); | 
|  |  | 
|  | return mux; | 
|  |  | 
|  | exit: | 
|  | kfree(mux->shared_intr_buf); | 
|  | usb_free_urb(mux->shared_intr_urb); | 
|  | kfree(mux); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* Gets the port spec for a certain interface */ | 
|  | static int hso_get_config_data(struct usb_interface *interface) | 
|  | { | 
|  | struct usb_device *usbdev = interface_to_usbdev(interface); | 
|  | u8 *config_data = kmalloc(17, GFP_KERNEL); | 
|  | u32 if_num = interface->cur_altsetting->desc.bInterfaceNumber; | 
|  | s32 result; | 
|  |  | 
|  | if (!config_data) | 
|  | return -ENOMEM; | 
|  | if (usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), | 
|  | 0x86, 0xC0, 0, 0, config_data, 17, | 
|  | USB_CTRL_SET_TIMEOUT) != 0x11) { | 
|  | kfree(config_data); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | switch (config_data[if_num]) { | 
|  | case 0x0: | 
|  | result = 0; | 
|  | break; | 
|  | case 0x1: | 
|  | result = HSO_PORT_DIAG; | 
|  | break; | 
|  | case 0x2: | 
|  | result = HSO_PORT_GPS; | 
|  | break; | 
|  | case 0x3: | 
|  | result = HSO_PORT_GPS_CONTROL; | 
|  | break; | 
|  | case 0x4: | 
|  | result = HSO_PORT_APP; | 
|  | break; | 
|  | case 0x5: | 
|  | result = HSO_PORT_APP2; | 
|  | break; | 
|  | case 0x6: | 
|  | result = HSO_PORT_CONTROL; | 
|  | break; | 
|  | case 0x7: | 
|  | result = HSO_PORT_NETWORK; | 
|  | break; | 
|  | case 0x8: | 
|  | result = HSO_PORT_MODEM; | 
|  | break; | 
|  | case 0x9: | 
|  | result = HSO_PORT_MSD; | 
|  | break; | 
|  | case 0xa: | 
|  | result = HSO_PORT_PCSC; | 
|  | break; | 
|  | case 0xb: | 
|  | result = HSO_PORT_VOICE; | 
|  | break; | 
|  | default: | 
|  | result = 0; | 
|  | } | 
|  |  | 
|  | if (result) | 
|  | result |= HSO_INTF_BULK; | 
|  |  | 
|  | if (config_data[16] & 0x1) | 
|  | result |= HSO_INFO_CRC_BUG; | 
|  |  | 
|  | kfree(config_data); | 
|  | return result; | 
|  | } | 
|  |  | 
|  | /* called once for each interface upon device insertion */ | 
|  | static int hso_probe(struct usb_interface *interface, | 
|  | const struct usb_device_id *id) | 
|  | { | 
|  | int mux, i, if_num, port_spec; | 
|  | unsigned char port_mask; | 
|  | struct hso_device *hso_dev = NULL; | 
|  | struct hso_shared_int *shared_int; | 
|  | struct hso_device *tmp_dev = NULL; | 
|  |  | 
|  | if (interface->cur_altsetting->desc.bInterfaceClass != 0xFF) { | 
|  | dev_err(&interface->dev, "Not our interface\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | if_num = interface->cur_altsetting->desc.bInterfaceNumber; | 
|  |  | 
|  | /* Get the interface/port specification from either driver_info or from | 
|  | * the device itself */ | 
|  | if (id->driver_info) | 
|  | port_spec = ((u32 *)(id->driver_info))[if_num]; | 
|  | else | 
|  | port_spec = hso_get_config_data(interface); | 
|  |  | 
|  | /* Check if we need to switch to alt interfaces prior to port | 
|  | * configuration */ | 
|  | if (interface->num_altsetting > 1) | 
|  | usb_set_interface(interface_to_usbdev(interface), if_num, 1); | 
|  | interface->needs_remote_wakeup = 1; | 
|  |  | 
|  | /* Allocate new hso device(s) */ | 
|  | switch (port_spec & HSO_INTF_MASK) { | 
|  | case HSO_INTF_MUX: | 
|  | if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) { | 
|  | /* Create the network device */ | 
|  | if (!disable_net) { | 
|  | hso_dev = hso_create_net_device(interface, | 
|  | port_spec); | 
|  | if (!hso_dev) | 
|  | goto exit; | 
|  | tmp_dev = hso_dev; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (hso_get_mux_ports(interface, &port_mask)) | 
|  | /* TODO: de-allocate everything */ | 
|  | goto exit; | 
|  |  | 
|  | shared_int = hso_create_shared_int(interface); | 
|  | if (!shared_int) | 
|  | goto exit; | 
|  |  | 
|  | for (i = 1, mux = 0; i < 0x100; i = i << 1, mux++) { | 
|  | if (port_mask & i) { | 
|  | hso_dev = hso_create_mux_serial_device( | 
|  | interface, i, shared_int); | 
|  | if (!hso_dev) | 
|  | goto exit; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (tmp_dev) | 
|  | hso_dev = tmp_dev; | 
|  | break; | 
|  |  | 
|  | case HSO_INTF_BULK: | 
|  | /* It's a regular bulk interface */ | 
|  | if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) { | 
|  | if (!disable_net) | 
|  | hso_dev = | 
|  | hso_create_net_device(interface, port_spec); | 
|  | } else { | 
|  | hso_dev = | 
|  | hso_create_bulk_serial_device(interface, port_spec); | 
|  | } | 
|  | if (!hso_dev) | 
|  | goto exit; | 
|  | break; | 
|  | default: | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | /* save our data pointer in this device */ | 
|  | usb_set_intfdata(interface, hso_dev); | 
|  |  | 
|  | /* done */ | 
|  | return 0; | 
|  | exit: | 
|  | hso_free_interface(interface); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | /* device removed, cleaning up */ | 
|  | static void hso_disconnect(struct usb_interface *interface) | 
|  | { | 
|  | hso_free_interface(interface); | 
|  |  | 
|  | /* remove reference of our private data */ | 
|  | usb_set_intfdata(interface, NULL); | 
|  | } | 
|  |  | 
|  | static void async_get_intf(struct work_struct *data) | 
|  | { | 
|  | struct hso_device *hso_dev = | 
|  | container_of(data, struct hso_device, async_get_intf); | 
|  | usb_autopm_get_interface(hso_dev->interface); | 
|  | } | 
|  |  | 
|  | static void async_put_intf(struct work_struct *data) | 
|  | { | 
|  | struct hso_device *hso_dev = | 
|  | container_of(data, struct hso_device, async_put_intf); | 
|  | usb_autopm_put_interface(hso_dev->interface); | 
|  | } | 
|  |  | 
|  | static int hso_get_activity(struct hso_device *hso_dev) | 
|  | { | 
|  | if (hso_dev->usb->state == USB_STATE_SUSPENDED) { | 
|  | if (!hso_dev->is_active) { | 
|  | hso_dev->is_active = 1; | 
|  | schedule_work(&hso_dev->async_get_intf); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (hso_dev->usb->state != USB_STATE_CONFIGURED) | 
|  | return -EAGAIN; | 
|  |  | 
|  | usb_mark_last_busy(hso_dev->usb); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int hso_put_activity(struct hso_device *hso_dev) | 
|  | { | 
|  | if (hso_dev->usb->state != USB_STATE_SUSPENDED) { | 
|  | if (hso_dev->is_active) { | 
|  | hso_dev->is_active = 0; | 
|  | schedule_work(&hso_dev->async_put_intf); | 
|  | return -EAGAIN; | 
|  | } | 
|  | } | 
|  | hso_dev->is_active = 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* called by kernel when we need to suspend device */ | 
|  | static int hso_suspend(struct usb_interface *iface, pm_message_t message) | 
|  | { | 
|  | int i, result; | 
|  |  | 
|  | /* Stop all serial ports */ | 
|  | for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) { | 
|  | if (serial_table[i] && (serial_table[i]->interface == iface)) { | 
|  | result = hso_stop_serial_device(serial_table[i]); | 
|  | if (result) | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Stop all network ports */ | 
|  | for (i = 0; i < HSO_MAX_NET_DEVICES; i++) { | 
|  | if (network_table[i] && | 
|  | (network_table[i]->interface == iface)) { | 
|  | result = hso_stop_net_device(network_table[i]); | 
|  | if (result) | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | out: | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* called by kernel when we need to resume device */ | 
|  | static int hso_resume(struct usb_interface *iface) | 
|  | { | 
|  | int i, result = 0; | 
|  | struct hso_net *hso_net; | 
|  |  | 
|  | /* Start all serial ports */ | 
|  | for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) { | 
|  | if (serial_table[i] && (serial_table[i]->interface == iface)) { | 
|  | if (dev2ser(serial_table[i])->port.count) { | 
|  | result = | 
|  | hso_start_serial_device(serial_table[i], GFP_NOIO); | 
|  | hso_kick_transmit(dev2ser(serial_table[i])); | 
|  | if (result) | 
|  | goto out; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Start all network ports */ | 
|  | for (i = 0; i < HSO_MAX_NET_DEVICES; i++) { | 
|  | if (network_table[i] && | 
|  | (network_table[i]->interface == iface)) { | 
|  | hso_net = dev2net(network_table[i]); | 
|  | if (hso_net->flags & IFF_UP) { | 
|  | /* First transmit any lingering data, | 
|  | then restart the device. */ | 
|  | if (hso_net->skb_tx_buf) { | 
|  | dev_dbg(&iface->dev, | 
|  | "Transmitting" | 
|  | " lingering data\n"); | 
|  | hso_net_start_xmit(hso_net->skb_tx_buf, | 
|  | hso_net->net); | 
|  | hso_net->skb_tx_buf = NULL; | 
|  | } | 
|  | result = hso_start_net_device(network_table[i]); | 
|  | if (result) | 
|  | goto out; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | out: | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static void hso_serial_ref_free(struct kref *ref) | 
|  | { | 
|  | struct hso_device *hso_dev = container_of(ref, struct hso_device, ref); | 
|  |  | 
|  | hso_free_serial_device(hso_dev); | 
|  | } | 
|  |  | 
|  | static void hso_free_interface(struct usb_interface *interface) | 
|  | { | 
|  | struct hso_serial *serial; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) { | 
|  | if (serial_table[i] && | 
|  | (serial_table[i]->interface == interface)) { | 
|  | serial = dev2ser(serial_table[i]); | 
|  | tty_port_tty_hangup(&serial->port, false); | 
|  | mutex_lock(&serial->parent->mutex); | 
|  | serial->parent->usb_gone = 1; | 
|  | mutex_unlock(&serial->parent->mutex); | 
|  | cancel_work_sync(&serial_table[i]->async_put_intf); | 
|  | cancel_work_sync(&serial_table[i]->async_get_intf); | 
|  | hso_serial_tty_unregister(serial); | 
|  | kref_put(&serial_table[i]->ref, hso_serial_ref_free); | 
|  | set_serial_by_index(i, NULL); | 
|  | } | 
|  | } | 
|  |  | 
|  | for (i = 0; i < HSO_MAX_NET_DEVICES; i++) { | 
|  | if (network_table[i] && | 
|  | (network_table[i]->interface == interface)) { | 
|  | struct rfkill *rfk = dev2net(network_table[i])->rfkill; | 
|  | /* hso_stop_net_device doesn't stop the net queue since | 
|  | * traffic needs to start it again when suspended */ | 
|  | netif_stop_queue(dev2net(network_table[i])->net); | 
|  | hso_stop_net_device(network_table[i]); | 
|  | cancel_work_sync(&network_table[i]->async_put_intf); | 
|  | cancel_work_sync(&network_table[i]->async_get_intf); | 
|  | if (rfk) { | 
|  | rfkill_unregister(rfk); | 
|  | rfkill_destroy(rfk); | 
|  | } | 
|  | hso_free_net_device(network_table[i]); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Helper functions */ | 
|  |  | 
|  | /* Get the endpoint ! */ | 
|  | static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf, | 
|  | int type, int dir) | 
|  | { | 
|  | int i; | 
|  | struct usb_host_interface *iface = intf->cur_altsetting; | 
|  | struct usb_endpoint_descriptor *endp; | 
|  |  | 
|  | for (i = 0; i < iface->desc.bNumEndpoints; i++) { | 
|  | endp = &iface->endpoint[i].desc; | 
|  | if (((endp->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == dir) && | 
|  | (usb_endpoint_type(endp) == type)) | 
|  | return endp; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* Get the byte that describes which ports are enabled */ | 
|  | static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports) | 
|  | { | 
|  | int i; | 
|  | struct usb_host_interface *iface = intf->cur_altsetting; | 
|  |  | 
|  | if (iface->extralen == 3) { | 
|  | *ports = iface->extra[2]; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < iface->desc.bNumEndpoints; i++) { | 
|  | if (iface->endpoint[i].extralen == 3) { | 
|  | *ports = iface->endpoint[i].extra[2]; | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* interrupt urb needs to be submitted, used for serial read of muxed port */ | 
|  | static int hso_mux_submit_intr_urb(struct hso_shared_int *shared_int, | 
|  | struct usb_device *usb, gfp_t gfp) | 
|  | { | 
|  | int result; | 
|  |  | 
|  | usb_fill_int_urb(shared_int->shared_intr_urb, usb, | 
|  | usb_rcvintpipe(usb, | 
|  | shared_int->intr_endp->bEndpointAddress & 0x7F), | 
|  | shared_int->shared_intr_buf, | 
|  | 1, | 
|  | intr_callback, shared_int, | 
|  | shared_int->intr_endp->bInterval); | 
|  |  | 
|  | result = usb_submit_urb(shared_int->shared_intr_urb, gfp); | 
|  | if (result) | 
|  | dev_warn(&usb->dev, "%s failed mux_intr_urb %d\n", __func__, | 
|  | result); | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | /* operations setup of the serial interface */ | 
|  | static const struct tty_operations hso_serial_ops = { | 
|  | .open = hso_serial_open, | 
|  | .close = hso_serial_close, | 
|  | .write = hso_serial_write, | 
|  | .write_room = hso_serial_write_room, | 
|  | .cleanup = hso_serial_cleanup, | 
|  | .ioctl = hso_serial_ioctl, | 
|  | .set_termios = hso_serial_set_termios, | 
|  | .chars_in_buffer = hso_serial_chars_in_buffer, | 
|  | .tiocmget = hso_serial_tiocmget, | 
|  | .tiocmset = hso_serial_tiocmset, | 
|  | .get_icount = hso_get_count, | 
|  | .unthrottle = hso_unthrottle | 
|  | }; | 
|  |  | 
|  | static struct usb_driver hso_driver = { | 
|  | .name = driver_name, | 
|  | .probe = hso_probe, | 
|  | .disconnect = hso_disconnect, | 
|  | .id_table = hso_ids, | 
|  | .suspend = hso_suspend, | 
|  | .resume = hso_resume, | 
|  | .reset_resume = hso_resume, | 
|  | .supports_autosuspend = 1, | 
|  | .disable_hub_initiated_lpm = 1, | 
|  | }; | 
|  |  | 
|  | static int __init hso_init(void) | 
|  | { | 
|  | int i; | 
|  | int result; | 
|  |  | 
|  | /* put it in the log */ | 
|  | printk(KERN_INFO "hso: %s\n", version); | 
|  |  | 
|  | /* Initialise the serial table semaphore and table */ | 
|  | spin_lock_init(&serial_table_lock); | 
|  | for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) | 
|  | serial_table[i] = NULL; | 
|  |  | 
|  | /* allocate our driver using the proper amount of supported minors */ | 
|  | tty_drv = alloc_tty_driver(HSO_SERIAL_TTY_MINORS); | 
|  | if (!tty_drv) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* fill in all needed values */ | 
|  | tty_drv->driver_name = driver_name; | 
|  | tty_drv->name = tty_filename; | 
|  |  | 
|  | /* if major number is provided as parameter, use that one */ | 
|  | if (tty_major) | 
|  | tty_drv->major = tty_major; | 
|  |  | 
|  | tty_drv->minor_start = 0; | 
|  | tty_drv->type = TTY_DRIVER_TYPE_SERIAL; | 
|  | tty_drv->subtype = SERIAL_TYPE_NORMAL; | 
|  | tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; | 
|  | tty_drv->init_termios = tty_std_termios; | 
|  | hso_init_termios(&tty_drv->init_termios); | 
|  | tty_set_operations(tty_drv, &hso_serial_ops); | 
|  |  | 
|  | /* register the tty driver */ | 
|  | result = tty_register_driver(tty_drv); | 
|  | if (result) { | 
|  | printk(KERN_ERR "%s - tty_register_driver failed(%d)\n", | 
|  | __func__, result); | 
|  | goto err_free_tty; | 
|  | } | 
|  |  | 
|  | /* register this module as an usb driver */ | 
|  | result = usb_register(&hso_driver); | 
|  | if (result) { | 
|  | printk(KERN_ERR "Could not register hso driver? error: %d\n", | 
|  | result); | 
|  | goto err_unreg_tty; | 
|  | } | 
|  |  | 
|  | /* done */ | 
|  | return 0; | 
|  | err_unreg_tty: | 
|  | tty_unregister_driver(tty_drv); | 
|  | err_free_tty: | 
|  | put_tty_driver(tty_drv); | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static void __exit hso_exit(void) | 
|  | { | 
|  | printk(KERN_INFO "hso: unloaded\n"); | 
|  |  | 
|  | tty_unregister_driver(tty_drv); | 
|  | put_tty_driver(tty_drv); | 
|  | /* deregister the usb driver */ | 
|  | usb_deregister(&hso_driver); | 
|  | } | 
|  |  | 
|  | /* Module definitions */ | 
|  | module_init(hso_init); | 
|  | module_exit(hso_exit); | 
|  |  | 
|  | MODULE_AUTHOR(MOD_AUTHOR); | 
|  | MODULE_DESCRIPTION(MOD_DESCRIPTION); | 
|  | MODULE_LICENSE(MOD_LICENSE); | 
|  |  | 
|  | /* change the debug level (eg: insmod hso.ko debug=0x04) */ | 
|  | MODULE_PARM_DESC(debug, "Level of debug [0x01 | 0x02 | 0x04 | 0x08 | 0x10]"); | 
|  | module_param(debug, int, S_IRUGO | S_IWUSR); | 
|  |  | 
|  | /* set the major tty number (eg: insmod hso.ko tty_major=245) */ | 
|  | MODULE_PARM_DESC(tty_major, "Set the major tty number"); | 
|  | module_param(tty_major, int, S_IRUGO | S_IWUSR); | 
|  |  | 
|  | /* disable network interface (eg: insmod hso.ko disable_net=1) */ | 
|  | MODULE_PARM_DESC(disable_net, "Disable the network interface"); | 
|  | module_param(disable_net, int, S_IRUGO | S_IWUSR); |