| /* |
| * Universal Host Controller Interface driver for USB. |
| * |
| * Maintainer: Johannes Erdfelt <johannes@erdfelt.com> |
| * |
| * (C) Copyright 1999 Linus Torvalds |
| * (C) Copyright 1999-2001 Johannes Erdfelt, johannes@erdfelt.com |
| * (C) Copyright 1999 Randy Dunlap |
| * (C) Copyright 1999 Georg Acher, acher@in.tum.de |
| * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de |
| * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch |
| * (C) Copyright 1999 Roman Weissgaerber, weissg@vienna.at |
| * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface |
| * support from usb-ohci.c by Adam Richter, adam@yggdrasil.com). |
| * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c) |
| * |
| * Intel documents this fairly well, and as far as I know there |
| * are no royalties or anything like that, but even so there are |
| * people who decided that they want to do the same thing in a |
| * completely different way. |
| * |
| * WARNING! The USB documentation is downright evil. Most of it |
| * is just crap, written by a committee. You're better off ignoring |
| * most of it, the important stuff is: |
| * - the low-level protocol (fairly simple but lots of small details) |
| * - working around the horridness of the rest |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/ioport.h> |
| #include <linux/sched.h> |
| #include <linux/slab.h> |
| #include <linux/smp_lock.h> |
| #include <linux/errno.h> |
| #include <linux/unistd.h> |
| #include <linux/interrupt.h> |
| #include <linux/spinlock.h> |
| #include <linux/proc_fs.h> |
| #ifdef CONFIG_USB_DEBUG |
| #define DEBUG |
| #else |
| #undef DEBUG |
| #endif |
| #include <linux/usb.h> |
| |
| #include <asm/uaccess.h> |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/system.h> |
| |
| #include "uhci.h" |
| |
| #include <linux/pm.h> |
| |
| |
| /* |
| * Version Information |
| */ |
| #define DRIVER_VERSION "v1.1" |
| #define DRIVER_AUTHOR "Linus 'Frodo Rabbit' Torvalds, Johannes Erdfelt, Randy Dunlap, Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber" |
| #define DRIVER_DESC "USB Universal Host Controller Interface driver" |
| |
| |
| /* |
| * debug = 0, no debugging messages |
| * debug = 1, dump failed URB's except for stalls |
| * debug = 2, dump all failed URB's (including stalls) |
| * show all queues in /proc/uhci/hc* |
| * debug = 3, show all TD's in URB's when dumping |
| */ |
| #ifdef DEBUG |
| static int debug = 1; |
| #else |
| static int debug = 0; |
| #endif |
| MODULE_PARM(debug, "i"); |
| MODULE_PARM_DESC(debug, "Debug level"); |
| static char *errbuf; |
| #define ERRBUF_LEN (PAGE_SIZE * 8) |
| |
| #include "uhci-debug.h" |
| |
| static kmem_cache_t *uhci_up_cachep; /* urb_priv */ |
| |
| static int rh_submit_urb(struct urb *urb); |
| static int rh_unlink_urb(struct urb *urb); |
| static int uhci_get_current_frame_number(struct usb_device *dev); |
| static int uhci_unlink_urb(struct urb *urb); |
| static void uhci_unlink_generic(struct uhci *uhci, struct urb *urb); |
| static void uhci_call_completion(struct urb *urb); |
| |
| static int ports_active(struct uhci *uhci); |
| static void suspend_hc(struct uhci *uhci); |
| static void wakeup_hc(struct uhci *uhci); |
| |
| /* If a transfer is still active after this much time, turn off FSBR */ |
| #define IDLE_TIMEOUT (HZ / 20) /* 50 ms */ |
| |
| #define MAX_URB_LOOP 2048 /* Maximum number of linked URB's */ |
| |
| /* |
| * Only the USB core should call uhci_alloc_dev and uhci_free_dev |
| */ |
| static int uhci_alloc_dev(struct usb_device *dev) |
| { |
| return 0; |
| } |
| |
| static int uhci_free_dev(struct usb_device *dev) |
| { |
| return 0; |
| } |
| |
| static inline void uhci_set_next_interrupt(struct uhci *uhci) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&uhci->frame_list_lock, flags); |
| set_bit(TD_CTRL_IOC_BIT, &uhci->skel_term_td->status); |
| spin_unlock_irqrestore(&uhci->frame_list_lock, flags); |
| } |
| |
| static inline void uhci_clear_next_interrupt(struct uhci *uhci) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&uhci->frame_list_lock, flags); |
| clear_bit(TD_CTRL_IOC_BIT, &uhci->skel_term_td->status); |
| spin_unlock_irqrestore(&uhci->frame_list_lock, flags); |
| } |
| |
| static inline void uhci_add_complete(struct urb *urb) |
| { |
| struct uhci *uhci = (struct uhci *)urb->dev->bus->hcpriv; |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&uhci->complete_list_lock, flags); |
| list_add(&urbp->complete_list, &uhci->complete_list); |
| spin_unlock_irqrestore(&uhci->complete_list_lock, flags); |
| } |
| |
| static struct uhci_td *uhci_alloc_td(struct uhci *uhci, struct usb_device *dev) |
| { |
| dma_addr_t dma_handle; |
| struct uhci_td *td; |
| |
| td = pci_pool_alloc(uhci->td_pool, GFP_DMA | GFP_ATOMIC, &dma_handle); |
| if (!td) |
| return NULL; |
| |
| td->dma_handle = dma_handle; |
| |
| td->link = UHCI_PTR_TERM; |
| td->buffer = 0; |
| |
| td->frame = -1; |
| td->dev = dev; |
| |
| INIT_LIST_HEAD(&td->list); |
| INIT_LIST_HEAD(&td->fl_list); |
| |
| usb_inc_dev_use(dev); |
| |
| return td; |
| } |
| |
| static void inline uhci_fill_td(struct uhci_td *td, __u32 status, |
| __u32 info, __u32 buffer) |
| { |
| td->status = status; |
| td->info = info; |
| td->buffer = buffer; |
| } |
| |
| static void uhci_insert_td(struct uhci *uhci, struct uhci_td *skeltd, struct uhci_td *td) |
| { |
| unsigned long flags; |
| struct uhci_td *ltd; |
| |
| spin_lock_irqsave(&uhci->frame_list_lock, flags); |
| |
| ltd = list_entry(skeltd->fl_list.prev, struct uhci_td, fl_list); |
| |
| td->link = ltd->link; |
| mb(); |
| ltd->link = td->dma_handle; |
| |
| list_add_tail(&td->fl_list, &skeltd->fl_list); |
| |
| spin_unlock_irqrestore(&uhci->frame_list_lock, flags); |
| } |
| |
| /* |
| * We insert Isochronous transfers directly into the frame list at the |
| * beginning |
| * The layout looks as follows: |
| * frame list pointer -> iso td's (if any) -> |
| * periodic interrupt td (if frame 0) -> irq td's -> control qh -> bulk qh |
| */ |
| static void uhci_insert_td_frame_list(struct uhci *uhci, struct uhci_td *td, unsigned framenum) |
| { |
| unsigned long flags; |
| |
| framenum %= UHCI_NUMFRAMES; |
| |
| spin_lock_irqsave(&uhci->frame_list_lock, flags); |
| |
| td->frame = framenum; |
| |
| /* Is there a TD already mapped there? */ |
| if (uhci->fl->frame_cpu[framenum]) { |
| struct uhci_td *ftd, *ltd; |
| |
| ftd = uhci->fl->frame_cpu[framenum]; |
| ltd = list_entry(ftd->fl_list.prev, struct uhci_td, fl_list); |
| |
| list_add_tail(&td->fl_list, &ftd->fl_list); |
| |
| td->link = ltd->link; |
| mb(); |
| ltd->link = td->dma_handle; |
| } else { |
| td->link = uhci->fl->frame[framenum]; |
| mb(); |
| uhci->fl->frame[framenum] = td->dma_handle; |
| uhci->fl->frame_cpu[framenum] = td; |
| } |
| |
| spin_unlock_irqrestore(&uhci->frame_list_lock, flags); |
| } |
| |
| static void uhci_remove_td(struct uhci *uhci, struct uhci_td *td) |
| { |
| unsigned long flags; |
| |
| /* If it's not inserted, don't remove it */ |
| if (td->frame == -1 && list_empty(&td->fl_list)) |
| return; |
| |
| spin_lock_irqsave(&uhci->frame_list_lock, flags); |
| if (td->frame != -1 && uhci->fl->frame_cpu[td->frame] == td) { |
| if (list_empty(&td->fl_list)) { |
| uhci->fl->frame[td->frame] = td->link; |
| uhci->fl->frame_cpu[td->frame] = NULL; |
| } else { |
| struct uhci_td *ntd; |
| |
| ntd = list_entry(td->fl_list.next, struct uhci_td, fl_list); |
| uhci->fl->frame[td->frame] = ntd->dma_handle; |
| uhci->fl->frame_cpu[td->frame] = ntd; |
| } |
| } else { |
| struct uhci_td *ptd; |
| |
| ptd = list_entry(td->fl_list.prev, struct uhci_td, fl_list); |
| ptd->link = td->link; |
| } |
| |
| mb(); |
| td->link = UHCI_PTR_TERM; |
| |
| list_del_init(&td->fl_list); |
| td->frame = -1; |
| |
| spin_unlock_irqrestore(&uhci->frame_list_lock, flags); |
| } |
| |
| /* |
| * Inserts a td into qh list at the top. |
| */ |
| static void uhci_insert_tds_in_qh(struct uhci_qh *qh, struct urb *urb, int breadth) |
| { |
| struct list_head *tmp, *head; |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| struct uhci_td *td, *ptd; |
| |
| if (list_empty(&urbp->td_list)) |
| return; |
| |
| head = &urbp->td_list; |
| tmp = head->next; |
| |
| /* Ordering isn't important here yet since the QH hasn't been */ |
| /* inserted into the schedule yet */ |
| td = list_entry(tmp, struct uhci_td, list); |
| |
| /* Add the first TD to the QH element pointer */ |
| qh->element = td->dma_handle | (breadth ? 0 : UHCI_PTR_DEPTH); |
| |
| ptd = td; |
| |
| /* Then link the rest of the TD's */ |
| tmp = tmp->next; |
| while (tmp != head) { |
| td = list_entry(tmp, struct uhci_td, list); |
| |
| tmp = tmp->next; |
| |
| ptd->link = td->dma_handle | (breadth ? 0 : UHCI_PTR_DEPTH); |
| |
| ptd = td; |
| } |
| |
| ptd->link = UHCI_PTR_TERM; |
| } |
| |
| static void uhci_free_td(struct uhci *uhci, struct uhci_td *td) |
| { |
| if (!list_empty(&td->list) || !list_empty(&td->fl_list)) |
| dbg("td is still in URB list!"); |
| |
| if (td->dev) |
| usb_dec_dev_use(td->dev); |
| |
| pci_pool_free(uhci->td_pool, td, td->dma_handle); |
| } |
| |
| static struct uhci_qh *uhci_alloc_qh(struct uhci *uhci, struct usb_device *dev) |
| { |
| dma_addr_t dma_handle; |
| struct uhci_qh *qh; |
| |
| qh = pci_pool_alloc(uhci->qh_pool, GFP_DMA | GFP_ATOMIC, &dma_handle); |
| if (!qh) |
| return NULL; |
| |
| qh->dma_handle = dma_handle; |
| |
| qh->element = UHCI_PTR_TERM; |
| qh->link = UHCI_PTR_TERM; |
| |
| qh->dev = dev; |
| |
| INIT_LIST_HEAD(&qh->list); |
| INIT_LIST_HEAD(&qh->remove_list); |
| |
| usb_inc_dev_use(dev); |
| |
| return qh; |
| } |
| |
| static void uhci_free_qh(struct uhci *uhci, struct uhci_qh *qh) |
| { |
| if (!list_empty(&qh->list)) |
| dbg("qh list not empty!"); |
| if (!list_empty(&qh->remove_list)) |
| dbg("qh still in remove_list!"); |
| |
| if (qh->dev) |
| usb_dec_dev_use(qh->dev); |
| |
| pci_pool_free(uhci->qh_pool, qh, qh->dma_handle); |
| } |
| |
| static void _uhci_insert_qh(struct uhci *uhci, struct uhci_qh *skelqh, struct urb *urb) |
| { |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| struct list_head *head, *tmp; |
| struct uhci_qh *lqh; |
| |
| /* Grab the last QH */ |
| lqh = list_entry(skelqh->list.prev, struct uhci_qh, list); |
| |
| if (lqh->urbp) { |
| head = &lqh->urbp->queue_list; |
| tmp = head->next; |
| while (head != tmp) { |
| struct urb_priv *turbp = |
| list_entry(tmp, struct urb_priv, queue_list); |
| |
| tmp = tmp->next; |
| |
| turbp->qh->link = urbp->qh->dma_handle | UHCI_PTR_QH; |
| } |
| } |
| |
| head = &urbp->queue_list; |
| tmp = head->next; |
| while (head != tmp) { |
| struct urb_priv *turbp = |
| list_entry(tmp, struct urb_priv, queue_list); |
| |
| tmp = tmp->next; |
| |
| turbp->qh->link = lqh->link; |
| } |
| |
| urbp->qh->link = lqh->link; |
| mb(); /* Ordering is important */ |
| lqh->link = urbp->qh->dma_handle | UHCI_PTR_QH; |
| |
| list_add_tail(&urbp->qh->list, &skelqh->list); |
| } |
| |
| static void uhci_insert_qh(struct uhci *uhci, struct uhci_qh *skelqh, struct urb *urb) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&uhci->frame_list_lock, flags); |
| _uhci_insert_qh(uhci, skelqh, urb); |
| spin_unlock_irqrestore(&uhci->frame_list_lock, flags); |
| } |
| |
| static void uhci_remove_qh(struct uhci *uhci, struct urb *urb) |
| { |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| unsigned long flags; |
| struct uhci_qh *qh = urbp->qh, *pqh; |
| |
| if (!qh) |
| return; |
| |
| /* Only go through the hoops if it's actually linked in */ |
| if (!list_empty(&qh->list)) { |
| qh->urbp = NULL; |
| |
| spin_lock_irqsave(&uhci->frame_list_lock, flags); |
| |
| pqh = list_entry(qh->list.prev, struct uhci_qh, list); |
| |
| if (pqh->urbp) { |
| struct list_head *head, *tmp; |
| |
| head = &pqh->urbp->queue_list; |
| tmp = head->next; |
| while (head != tmp) { |
| struct urb_priv *turbp = |
| list_entry(tmp, struct urb_priv, queue_list); |
| |
| tmp = tmp->next; |
| |
| turbp->qh->link = qh->link; |
| } |
| } |
| |
| pqh->link = qh->link; |
| mb(); |
| qh->element = qh->link = UHCI_PTR_TERM; |
| |
| list_del_init(&qh->list); |
| |
| spin_unlock_irqrestore(&uhci->frame_list_lock, flags); |
| } |
| |
| spin_lock_irqsave(&uhci->qh_remove_list_lock, flags); |
| |
| /* Check to see if the remove list is empty. Set the IOC bit */ |
| /* to force an interrupt so we can remove the QH */ |
| if (list_empty(&uhci->qh_remove_list)) |
| uhci_set_next_interrupt(uhci); |
| |
| list_add(&qh->remove_list, &uhci->qh_remove_list); |
| |
| spin_unlock_irqrestore(&uhci->qh_remove_list_lock, flags); |
| } |
| |
| static int uhci_fixup_toggle(struct urb *urb, unsigned int toggle) |
| { |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| struct list_head *head, *tmp; |
| |
| head = &urbp->td_list; |
| tmp = head->next; |
| while (head != tmp) { |
| struct uhci_td *td = list_entry(tmp, struct uhci_td, list); |
| |
| tmp = tmp->next; |
| |
| if (toggle) |
| set_bit(TD_TOKEN_TOGGLE, &td->info); |
| else |
| clear_bit(TD_TOKEN_TOGGLE, &td->info); |
| |
| toggle ^= 1; |
| } |
| |
| return toggle; |
| } |
| |
| /* This function will append one URB's QH to another URB's QH. This is for */ |
| /* USB_QUEUE_BULK support for bulk transfers and soon implicitily for */ |
| /* control transfers */ |
| static void uhci_append_queued_urb(struct uhci *uhci, struct urb *eurb, struct urb *urb) |
| { |
| struct urb_priv *eurbp, *urbp, *furbp, *lurbp; |
| struct list_head *tmp; |
| struct uhci_td *lltd; |
| unsigned long flags; |
| |
| eurbp = eurb->hcpriv; |
| urbp = urb->hcpriv; |
| |
| spin_lock_irqsave(&uhci->frame_list_lock, flags); |
| |
| /* Find the first URB in the queue */ |
| if (eurbp->queued) { |
| struct list_head *head = &eurbp->queue_list; |
| |
| tmp = head->next; |
| while (tmp != head) { |
| struct urb_priv *turbp = |
| list_entry(tmp, struct urb_priv, queue_list); |
| |
| if (!turbp->queued) |
| break; |
| |
| tmp = tmp->next; |
| } |
| } else |
| tmp = &eurbp->queue_list; |
| |
| furbp = list_entry(tmp, struct urb_priv, queue_list); |
| lurbp = list_entry(furbp->queue_list.prev, struct urb_priv, queue_list); |
| |
| lltd = list_entry(lurbp->td_list.prev, struct uhci_td, list); |
| |
| usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe), |
| uhci_fixup_toggle(urb, uhci_toggle(lltd->info) ^ 1)); |
| |
| /* All qh's in the queue need to link to the next queue */ |
| urbp->qh->link = eurbp->qh->link; |
| |
| mb(); /* Make sure we flush everything */ |
| /* Only support bulk right now, so no depth */ |
| lltd->link = urbp->qh->dma_handle | UHCI_PTR_QH; |
| |
| list_add_tail(&urbp->queue_list, &furbp->queue_list); |
| |
| urbp->queued = 1; |
| |
| spin_unlock_irqrestore(&uhci->frame_list_lock, flags); |
| } |
| |
| static void uhci_delete_queued_urb(struct uhci *uhci, struct urb *urb) |
| { |
| struct urb_priv *urbp, *nurbp; |
| struct list_head *head, *tmp; |
| struct urb_priv *purbp; |
| struct uhci_td *pltd; |
| unsigned int toggle; |
| unsigned long flags; |
| |
| urbp = urb->hcpriv; |
| |
| spin_lock_irqsave(&uhci->frame_list_lock, flags); |
| |
| if (list_empty(&urbp->queue_list)) |
| goto out; |
| |
| nurbp = list_entry(urbp->queue_list.next, struct urb_priv, queue_list); |
| |
| /* Fix up the toggle for the next URB's */ |
| if (!urbp->queued) |
| /* We set the toggle when we unlink */ |
| toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe)); |
| else { |
| /* If we're in the middle of the queue, grab the toggle */ |
| /* from the TD previous to us */ |
| purbp = list_entry(urbp->queue_list.prev, struct urb_priv, |
| queue_list); |
| |
| pltd = list_entry(purbp->td_list.prev, struct uhci_td, list); |
| |
| toggle = uhci_toggle(pltd->info) ^ 1; |
| } |
| |
| head = &urbp->queue_list; |
| tmp = head->next; |
| while (head != tmp) { |
| struct urb_priv *turbp; |
| |
| turbp = list_entry(tmp, struct urb_priv, queue_list); |
| |
| tmp = tmp->next; |
| |
| if (!turbp->queued) |
| break; |
| |
| toggle = uhci_fixup_toggle(turbp->urb, toggle); |
| } |
| |
| usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), |
| usb_pipeout(urb->pipe), toggle); |
| |
| if (!urbp->queued) { |
| nurbp->queued = 0; |
| |
| _uhci_insert_qh(uhci, uhci->skel_bulk_qh, nurbp->urb); |
| } else { |
| /* We're somewhere in the middle (or end). A bit trickier */ |
| /* than the head scenario */ |
| purbp = list_entry(urbp->queue_list.prev, struct urb_priv, |
| queue_list); |
| |
| pltd = list_entry(purbp->td_list.prev, struct uhci_td, list); |
| if (nurbp->queued) |
| pltd->link = nurbp->qh->dma_handle | UHCI_PTR_QH; |
| else |
| /* The next URB happens to be the beginning, so */ |
| /* we're the last, end the chain */ |
| pltd->link = UHCI_PTR_TERM; |
| } |
| |
| list_del_init(&urbp->queue_list); |
| |
| out: |
| spin_unlock_irqrestore(&uhci->frame_list_lock, flags); |
| } |
| |
| static struct urb_priv *uhci_alloc_urb_priv(struct uhci *uhci, struct urb *urb) |
| { |
| struct urb_priv *urbp; |
| |
| urbp = kmem_cache_alloc(uhci_up_cachep, in_interrupt() ? SLAB_ATOMIC : SLAB_KERNEL); |
| if (!urbp) { |
| err("uhci_alloc_urb_priv: couldn't allocate memory for urb_priv\n"); |
| return NULL; |
| } |
| |
| memset((void *)urbp, 0, sizeof(*urbp)); |
| |
| urbp->inserttime = jiffies; |
| urbp->fsbrtime = jiffies; |
| urbp->urb = urb; |
| urbp->dev = urb->dev; |
| |
| INIT_LIST_HEAD(&urbp->td_list); |
| INIT_LIST_HEAD(&urbp->queue_list); |
| INIT_LIST_HEAD(&urbp->complete_list); |
| |
| urb->hcpriv = urbp; |
| |
| if (urb->dev != uhci->rh.dev) { |
| if (urb->transfer_buffer_length) { |
| urbp->transfer_buffer_dma_handle = pci_map_single(uhci->dev, |
| urb->transfer_buffer, urb->transfer_buffer_length, |
| usb_pipein(urb->pipe) ? PCI_DMA_FROMDEVICE : |
| PCI_DMA_TODEVICE); |
| if (!urbp->transfer_buffer_dma_handle) |
| return NULL; |
| } |
| |
| if (usb_pipetype(urb->pipe) == PIPE_CONTROL && urb->setup_packet) { |
| urbp->setup_packet_dma_handle = pci_map_single(uhci->dev, |
| urb->setup_packet, sizeof(struct usb_ctrlrequest), |
| PCI_DMA_TODEVICE); |
| if (!urbp->setup_packet_dma_handle) |
| return NULL; |
| } |
| } |
| |
| return urbp; |
| } |
| |
| static void uhci_add_td_to_urb(struct urb *urb, struct uhci_td *td) |
| { |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| |
| td->urb = urb; |
| |
| list_add_tail(&td->list, &urbp->td_list); |
| } |
| |
| static void uhci_remove_td_from_urb(struct uhci_td *td) |
| { |
| if (list_empty(&td->list)) |
| return; |
| |
| list_del_init(&td->list); |
| |
| td->urb = NULL; |
| } |
| |
| static void uhci_destroy_urb_priv(struct urb *urb) |
| { |
| struct list_head *head, *tmp; |
| struct urb_priv *urbp; |
| struct uhci *uhci; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&urb->lock, flags); |
| |
| urbp = (struct urb_priv *)urb->hcpriv; |
| if (!urbp) |
| goto out; |
| |
| if (!urbp->dev || !urbp->dev->bus || !urbp->dev->bus->hcpriv) { |
| warn("uhci_destroy_urb_priv: urb %p belongs to disconnected device or bus?", urb); |
| goto out; |
| } |
| |
| if (!list_empty(&urb->urb_list)) |
| warn("uhci_destroy_urb_priv: urb %p still on uhci->urb_list or uhci->remove_list", urb); |
| |
| if (!list_empty(&urbp->complete_list)) |
| warn("uhci_destroy_urb_priv: urb %p still on uhci->complete_list", urb); |
| |
| uhci = urbp->dev->bus->hcpriv; |
| |
| head = &urbp->td_list; |
| tmp = head->next; |
| while (tmp != head) { |
| struct uhci_td *td = list_entry(tmp, struct uhci_td, list); |
| |
| tmp = tmp->next; |
| |
| uhci_remove_td_from_urb(td); |
| uhci_remove_td(uhci, td); |
| uhci_free_td(uhci, td); |
| } |
| |
| if (urbp->setup_packet_dma_handle) |
| pci_unmap_single(uhci->dev, urbp->setup_packet_dma_handle, |
| sizeof(struct usb_ctrlrequest), PCI_DMA_TODEVICE); |
| |
| if (urbp->transfer_buffer_dma_handle) |
| pci_unmap_single(uhci->dev, urbp->transfer_buffer_dma_handle, |
| urb->transfer_buffer_length, usb_pipein(urb->pipe) ? |
| PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE); |
| |
| urb->hcpriv = NULL; |
| kmem_cache_free(uhci_up_cachep, urbp); |
| |
| out: |
| spin_unlock_irqrestore(&urb->lock, flags); |
| } |
| |
| static void uhci_inc_fsbr(struct uhci *uhci, struct urb *urb) |
| { |
| unsigned long flags; |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| |
| spin_lock_irqsave(&uhci->frame_list_lock, flags); |
| |
| if ((!(urb->transfer_flags & USB_NO_FSBR)) && !urbp->fsbr) { |
| urbp->fsbr = 1; |
| if (!uhci->fsbr++) |
| uhci->skel_term_qh->link = uhci->skel_hs_control_qh->dma_handle | UHCI_PTR_QH; |
| } |
| |
| spin_unlock_irqrestore(&uhci->frame_list_lock, flags); |
| } |
| |
| static void uhci_dec_fsbr(struct uhci *uhci, struct urb *urb) |
| { |
| unsigned long flags; |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| |
| spin_lock_irqsave(&uhci->frame_list_lock, flags); |
| |
| if ((!(urb->transfer_flags & USB_NO_FSBR)) && urbp->fsbr) { |
| urbp->fsbr = 0; |
| if (!--uhci->fsbr) |
| uhci->skel_term_qh->link = UHCI_PTR_TERM; |
| } |
| |
| spin_unlock_irqrestore(&uhci->frame_list_lock, flags); |
| } |
| |
| /* |
| * Map status to standard result codes |
| * |
| * <status> is (td->status & 0xFE0000) [a.k.a. uhci_status_bits(td->status)] |
| * <dir_out> is True for output TDs and False for input TDs. |
| */ |
| static int uhci_map_status(int status, int dir_out) |
| { |
| if (!status) |
| return 0; |
| if (status & TD_CTRL_BITSTUFF) /* Bitstuff error */ |
| return -EPROTO; |
| if (status & TD_CTRL_CRCTIMEO) { /* CRC/Timeout */ |
| if (dir_out) |
| return -ETIMEDOUT; |
| else |
| return -EILSEQ; |
| } |
| if (status & TD_CTRL_NAK) /* NAK */ |
| return -ETIMEDOUT; |
| if (status & TD_CTRL_BABBLE) /* Babble */ |
| return -EOVERFLOW; |
| if (status & TD_CTRL_DBUFERR) /* Buffer error */ |
| return -ENOSR; |
| if (status & TD_CTRL_STALLED) /* Stalled */ |
| return -EPIPE; |
| if (status & TD_CTRL_ACTIVE) /* Active */ |
| return 0; |
| |
| return -EINVAL; |
| } |
| |
| /* |
| * Control transfers |
| */ |
| static int uhci_submit_control(struct urb *urb) |
| { |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| struct uhci *uhci = (struct uhci *)urb->dev->bus->hcpriv; |
| struct uhci_td *td; |
| struct uhci_qh *qh; |
| unsigned long destination, status; |
| int maxsze = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); |
| int len = urb->transfer_buffer_length; |
| dma_addr_t data = urbp->transfer_buffer_dma_handle; |
| |
| /* The "pipe" thing contains the destination in bits 8--18 */ |
| destination = (urb->pipe & PIPE_DEVEP_MASK) | USB_PID_SETUP; |
| |
| /* 3 errors */ |
| status = TD_CTRL_ACTIVE | (3 << 27); |
| if (urb->dev->speed == USB_SPEED_LOW) |
| status |= TD_CTRL_LS; |
| |
| /* |
| * Build the TD for the control request |
| */ |
| td = uhci_alloc_td(uhci, urb->dev); |
| if (!td) |
| return -ENOMEM; |
| |
| uhci_add_td_to_urb(urb, td); |
| uhci_fill_td(td, status, destination | (7 << 21), |
| urbp->setup_packet_dma_handle); |
| |
| /* |
| * If direction is "send", change the frame from SETUP (0x2D) |
| * to OUT (0xE1). Else change it from SETUP to IN (0x69). |
| */ |
| destination ^= (USB_PID_SETUP ^ usb_packetid(urb->pipe)); |
| |
| if (!(urb->transfer_flags & USB_DISABLE_SPD)) |
| status |= TD_CTRL_SPD; |
| |
| /* |
| * Build the DATA TD's |
| */ |
| while (len > 0) { |
| int pktsze = len; |
| |
| if (pktsze > maxsze) |
| pktsze = maxsze; |
| |
| td = uhci_alloc_td(uhci, urb->dev); |
| if (!td) |
| return -ENOMEM; |
| |
| /* Alternate Data0/1 (start with Data1) */ |
| destination ^= 1 << TD_TOKEN_TOGGLE; |
| |
| uhci_add_td_to_urb(urb, td); |
| uhci_fill_td(td, status, destination | ((pktsze - 1) << 21), |
| data); |
| |
| data += pktsze; |
| len -= pktsze; |
| } |
| |
| /* |
| * Build the final TD for control status |
| */ |
| td = uhci_alloc_td(uhci, urb->dev); |
| if (!td) |
| return -ENOMEM; |
| |
| /* |
| * It's IN if the pipe is an output pipe or we're not expecting |
| * data back. |
| */ |
| destination &= ~TD_PID; |
| if (usb_pipeout(urb->pipe) || !urb->transfer_buffer_length) |
| destination |= USB_PID_IN; |
| else |
| destination |= USB_PID_OUT; |
| |
| destination |= 1 << TD_TOKEN_TOGGLE; /* End in Data1 */ |
| |
| status &= ~TD_CTRL_SPD; |
| |
| uhci_add_td_to_urb(urb, td); |
| uhci_fill_td(td, status | TD_CTRL_IOC, |
| destination | (UHCI_NULL_DATA_SIZE << 21), 0); |
| |
| qh = uhci_alloc_qh(uhci, urb->dev); |
| if (!qh) |
| return -ENOMEM; |
| |
| urbp->qh = qh; |
| qh->urbp = urbp; |
| |
| /* Low speed or small transfers gets a different queue and treatment */ |
| if (urb->dev->speed == USB_SPEED_LOW) { |
| uhci_insert_tds_in_qh(qh, urb, 0); |
| uhci_insert_qh(uhci, uhci->skel_ls_control_qh, urb); |
| } else { |
| uhci_insert_tds_in_qh(qh, urb, 1); |
| uhci_insert_qh(uhci, uhci->skel_hs_control_qh, urb); |
| uhci_inc_fsbr(uhci, urb); |
| } |
| |
| return -EINPROGRESS; |
| } |
| |
| static int usb_control_retrigger_status(struct urb *urb); |
| |
| static int uhci_result_control(struct urb *urb) |
| { |
| struct list_head *tmp, *head; |
| struct urb_priv *urbp = urb->hcpriv; |
| struct uhci_td *td; |
| unsigned int status; |
| int ret = 0; |
| |
| if (list_empty(&urbp->td_list)) |
| return -EINVAL; |
| |
| head = &urbp->td_list; |
| |
| if (urbp->short_control_packet) { |
| tmp = head->prev; |
| goto status_phase; |
| } |
| |
| tmp = head->next; |
| td = list_entry(tmp, struct uhci_td, list); |
| |
| /* The first TD is the SETUP phase, check the status, but skip */ |
| /* the count */ |
| status = uhci_status_bits(td->status); |
| if (status & TD_CTRL_ACTIVE) |
| return -EINPROGRESS; |
| |
| if (status) |
| goto td_error; |
| |
| urb->actual_length = 0; |
| |
| /* The rest of the TD's (but the last) are data */ |
| tmp = tmp->next; |
| while (tmp != head && tmp->next != head) { |
| td = list_entry(tmp, struct uhci_td, list); |
| |
| tmp = tmp->next; |
| |
| if (urbp->fsbr_timeout && (td->status & TD_CTRL_IOC) && |
| !(td->status & TD_CTRL_ACTIVE)) { |
| uhci_inc_fsbr(urb->dev->bus->hcpriv, urb); |
| urbp->fsbr_timeout = 0; |
| urbp->fsbrtime = jiffies; |
| clear_bit(TD_CTRL_IOC_BIT, &td->status); |
| } |
| |
| status = uhci_status_bits(td->status); |
| if (status & TD_CTRL_ACTIVE) |
| return -EINPROGRESS; |
| |
| urb->actual_length += uhci_actual_length(td->status); |
| |
| if (status) |
| goto td_error; |
| |
| /* Check to see if we received a short packet */ |
| if (uhci_actual_length(td->status) < uhci_expected_length(td->info)) { |
| if (urb->transfer_flags & USB_DISABLE_SPD) { |
| ret = -EREMOTEIO; |
| goto err; |
| } |
| |
| if (uhci_packetid(td->info) == USB_PID_IN) |
| return usb_control_retrigger_status(urb); |
| else |
| return 0; |
| } |
| } |
| |
| status_phase: |
| td = list_entry(tmp, struct uhci_td, list); |
| |
| /* Control status phase */ |
| status = uhci_status_bits(td->status); |
| |
| #ifdef I_HAVE_BUGGY_APC_BACKUPS |
| /* APC BackUPS Pro kludge */ |
| /* It tries to send all of the descriptor instead of the amount */ |
| /* we requested */ |
| if (td->status & TD_CTRL_IOC && /* IOC is masked out by uhci_status_bits */ |
| status & TD_CTRL_ACTIVE && |
| status & TD_CTRL_NAK) |
| return 0; |
| #endif |
| |
| if (status & TD_CTRL_ACTIVE) |
| return -EINPROGRESS; |
| |
| if (status) |
| goto td_error; |
| |
| return 0; |
| |
| td_error: |
| ret = uhci_map_status(status, uhci_packetout(td->info)); |
| if (ret == -EPIPE) |
| /* endpoint has stalled - mark it halted */ |
| usb_endpoint_halt(urb->dev, uhci_endpoint(td->info), |
| uhci_packetout(td->info)); |
| |
| err: |
| if ((debug == 1 && ret != -EPIPE) || debug > 1) { |
| /* Some debugging code */ |
| dbg("uhci_result_control() failed with status %x", status); |
| |
| if (errbuf) { |
| /* Print the chain for debugging purposes */ |
| uhci_show_qh(urbp->qh, errbuf, ERRBUF_LEN, 0); |
| |
| lprintk(errbuf); |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int usb_control_retrigger_status(struct urb *urb) |
| { |
| struct list_head *tmp, *head; |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| struct uhci *uhci = urb->dev->bus->hcpriv; |
| |
| urbp->short_control_packet = 1; |
| |
| /* Create a new QH to avoid pointer overwriting problems */ |
| uhci_remove_qh(uhci, urb); |
| |
| /* Delete all of the TD's except for the status TD at the end */ |
| head = &urbp->td_list; |
| tmp = head->next; |
| while (tmp != head && tmp->next != head) { |
| struct uhci_td *td = list_entry(tmp, struct uhci_td, list); |
| |
| tmp = tmp->next; |
| |
| uhci_remove_td_from_urb(td); |
| uhci_remove_td(uhci, td); |
| uhci_free_td(uhci, td); |
| } |
| |
| urbp->qh = uhci_alloc_qh(uhci, urb->dev); |
| if (!urbp->qh) { |
| err("unable to allocate new QH for control retrigger"); |
| return -ENOMEM; |
| } |
| |
| urbp->qh->urbp = urbp; |
| |
| /* One TD, who cares about Breadth first? */ |
| uhci_insert_tds_in_qh(urbp->qh, urb, 0); |
| |
| /* Low speed or small transfers gets a different queue and treatment */ |
| if (urb->dev->speed == USB_SPEED_LOW) |
| uhci_insert_qh(uhci, uhci->skel_ls_control_qh, urb); |
| else |
| uhci_insert_qh(uhci, uhci->skel_hs_control_qh, urb); |
| |
| return -EINPROGRESS; |
| } |
| |
| /* |
| * Interrupt transfers |
| */ |
| static int uhci_submit_interrupt(struct urb *urb) |
| { |
| struct uhci_td *td; |
| unsigned long destination, status; |
| struct uhci *uhci = (struct uhci *)urb->dev->bus->hcpriv; |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| |
| if (urb->transfer_buffer_length > usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) |
| return -EINVAL; |
| |
| /* The "pipe" thing contains the destination in bits 8--18 */ |
| destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe); |
| |
| status = TD_CTRL_ACTIVE | TD_CTRL_IOC; |
| if (urb->dev->speed == USB_SPEED_LOW) |
| status |= TD_CTRL_LS; |
| |
| td = uhci_alloc_td(uhci, urb->dev); |
| if (!td) |
| return -ENOMEM; |
| |
| destination |= (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE); |
| destination |= ((urb->transfer_buffer_length - 1) << 21); |
| |
| usb_dotoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe)); |
| |
| uhci_add_td_to_urb(urb, td); |
| uhci_fill_td(td, status, destination, urbp->transfer_buffer_dma_handle); |
| |
| uhci_insert_td(uhci, uhci->skeltd[__interval_to_skel(urb->interval)], td); |
| |
| return -EINPROGRESS; |
| } |
| |
| static int uhci_result_interrupt(struct urb *urb) |
| { |
| struct list_head *tmp, *head; |
| struct urb_priv *urbp = urb->hcpriv; |
| struct uhci_td *td; |
| unsigned int status; |
| int ret = 0; |
| |
| urb->actual_length = 0; |
| |
| head = &urbp->td_list; |
| tmp = head->next; |
| while (tmp != head) { |
| td = list_entry(tmp, struct uhci_td, list); |
| |
| tmp = tmp->next; |
| |
| if (urbp->fsbr_timeout && (td->status & TD_CTRL_IOC) && |
| !(td->status & TD_CTRL_ACTIVE)) { |
| uhci_inc_fsbr(urb->dev->bus->hcpriv, urb); |
| urbp->fsbr_timeout = 0; |
| urbp->fsbrtime = jiffies; |
| clear_bit(TD_CTRL_IOC_BIT, &td->status); |
| } |
| |
| status = uhci_status_bits(td->status); |
| if (status & TD_CTRL_ACTIVE) |
| return -EINPROGRESS; |
| |
| urb->actual_length += uhci_actual_length(td->status); |
| |
| if (status) |
| goto td_error; |
| |
| if (uhci_actual_length(td->status) < uhci_expected_length(td->info)) { |
| if (urb->transfer_flags & USB_DISABLE_SPD) { |
| ret = -EREMOTEIO; |
| goto err; |
| } else |
| return 0; |
| } |
| } |
| |
| return 0; |
| |
| td_error: |
| ret = uhci_map_status(status, uhci_packetout(td->info)); |
| if (ret == -EPIPE) |
| /* endpoint has stalled - mark it halted */ |
| usb_endpoint_halt(urb->dev, uhci_endpoint(td->info), |
| uhci_packetout(td->info)); |
| |
| err: |
| if ((debug == 1 && ret != -EPIPE) || debug > 1) { |
| /* Some debugging code */ |
| dbg("uhci_result_interrupt/bulk() failed with status %x", |
| status); |
| |
| if (errbuf) { |
| /* Print the chain for debugging purposes */ |
| if (urbp->qh) |
| uhci_show_qh(urbp->qh, errbuf, ERRBUF_LEN, 0); |
| else |
| uhci_show_td(td, errbuf, ERRBUF_LEN, 0); |
| |
| lprintk(errbuf); |
| } |
| } |
| |
| return ret; |
| } |
| |
| static void uhci_reset_interrupt(struct urb *urb) |
| { |
| struct uhci *uhci = (struct uhci *)urb->dev->bus->hcpriv; |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| struct uhci_td *td; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&urb->lock, flags); |
| |
| /* Root hub is special */ |
| if (urb->dev == uhci->rh.dev) |
| goto out; |
| |
| td = list_entry(urbp->td_list.next, struct uhci_td, list); |
| |
| td->status = (td->status & 0x2F000000) | TD_CTRL_ACTIVE | TD_CTRL_IOC; |
| td->info &= ~(1 << TD_TOKEN_TOGGLE); |
| td->info |= (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE); |
| usb_dotoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe)); |
| |
| out: |
| urb->status = -EINPROGRESS; |
| |
| spin_unlock_irqrestore(&urb->lock, flags); |
| } |
| |
| /* |
| * Bulk transfers |
| */ |
| static int uhci_submit_bulk(struct urb *urb, struct urb *eurb) |
| { |
| struct uhci_td *td; |
| struct uhci_qh *qh; |
| unsigned long destination, status; |
| struct uhci *uhci = (struct uhci *)urb->dev->bus->hcpriv; |
| int maxsze = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); |
| int len = urb->transfer_buffer_length; |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| dma_addr_t data = urbp->transfer_buffer_dma_handle; |
| |
| if (len < 0) |
| return -EINVAL; |
| |
| /* Can't have low speed bulk transfers */ |
| if (urb->dev->speed == USB_SPEED_LOW) |
| return -EINVAL; |
| |
| /* The "pipe" thing contains the destination in bits 8--18 */ |
| destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe); |
| |
| /* 3 errors */ |
| status = TD_CTRL_ACTIVE | (3 << TD_CTRL_C_ERR_SHIFT); |
| |
| if (!(urb->transfer_flags & USB_DISABLE_SPD)) |
| status |= TD_CTRL_SPD; |
| |
| /* |
| * Build the DATA TD's |
| */ |
| do { /* Allow zero length packets */ |
| int pktsze = len; |
| |
| if (pktsze > maxsze) |
| pktsze = maxsze; |
| |
| td = uhci_alloc_td(uhci, urb->dev); |
| if (!td) |
| return -ENOMEM; |
| |
| uhci_add_td_to_urb(urb, td); |
| uhci_fill_td(td, status, destination | |
| (((pktsze - 1) & UHCI_NULL_DATA_SIZE) << 21) | |
| (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), |
| usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE), |
| data); |
| |
| data += pktsze; |
| len -= pktsze; |
| |
| usb_dotoggle(urb->dev, usb_pipeendpoint(urb->pipe), |
| usb_pipeout(urb->pipe)); |
| } while (len > 0); |
| |
| if (usb_pipeout(urb->pipe) && (urb->transfer_flags & USB_ZERO_PACKET) && |
| urb->transfer_buffer_length) { |
| td = uhci_alloc_td(uhci, urb->dev); |
| if (!td) |
| return -ENOMEM; |
| |
| uhci_add_td_to_urb(urb, td); |
| uhci_fill_td(td, status, destination | UHCI_NULL_DATA_SIZE | |
| (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), |
| usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE), |
| data); |
| |
| usb_dotoggle(urb->dev, usb_pipeendpoint(urb->pipe), |
| usb_pipeout(urb->pipe)); |
| } |
| |
| /* Set the flag on the last packet */ |
| td->status |= TD_CTRL_IOC; |
| |
| qh = uhci_alloc_qh(uhci, urb->dev); |
| if (!qh) |
| return -ENOMEM; |
| |
| urbp->qh = qh; |
| qh->urbp = urbp; |
| |
| /* Always assume breadth first */ |
| uhci_insert_tds_in_qh(qh, urb, 1); |
| |
| if (urb->transfer_flags & USB_QUEUE_BULK && eurb) |
| uhci_append_queued_urb(uhci, eurb, urb); |
| else |
| uhci_insert_qh(uhci, uhci->skel_bulk_qh, urb); |
| |
| uhci_inc_fsbr(uhci, urb); |
| |
| return -EINPROGRESS; |
| } |
| |
| /* We can use the result interrupt since they're identical */ |
| #define uhci_result_bulk uhci_result_interrupt |
| |
| /* |
| * Isochronous transfers |
| */ |
| static int isochronous_find_limits(struct urb *urb, unsigned int *start, unsigned int *end) |
| { |
| struct urb *last_urb = NULL; |
| struct uhci *uhci = (struct uhci *)urb->dev->bus->hcpriv; |
| struct list_head *tmp, *head; |
| int ret = 0; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&uhci->urb_list_lock, flags); |
| head = &uhci->urb_list; |
| tmp = head->next; |
| while (tmp != head) { |
| struct urb *u = list_entry(tmp, struct urb, urb_list); |
| |
| tmp = tmp->next; |
| |
| /* look for pending URB's with identical pipe handle */ |
| if ((urb->pipe == u->pipe) && (urb->dev == u->dev) && |
| (u->status == -EINPROGRESS) && (u != urb)) { |
| if (!last_urb) |
| *start = u->start_frame; |
| last_urb = u; |
| } |
| } |
| |
| if (last_urb) { |
| *end = (last_urb->start_frame + last_urb->number_of_packets) & 1023; |
| ret = 0; |
| } else |
| ret = -1; /* no previous urb found */ |
| |
| spin_unlock_irqrestore(&uhci->urb_list_lock, flags); |
| |
| return ret; |
| } |
| |
| static int isochronous_find_start(struct urb *urb) |
| { |
| int limits; |
| unsigned int start = 0, end = 0; |
| |
| if (urb->number_of_packets > 900) /* 900? Why? */ |
| return -EFBIG; |
| |
| limits = isochronous_find_limits(urb, &start, &end); |
| |
| if (urb->transfer_flags & USB_ISO_ASAP) { |
| if (limits) { |
| int curframe; |
| |
| curframe = uhci_get_current_frame_number(urb->dev) % UHCI_NUMFRAMES; |
| urb->start_frame = (curframe + 10) % UHCI_NUMFRAMES; |
| } else |
| urb->start_frame = end; |
| } else { |
| urb->start_frame %= UHCI_NUMFRAMES; |
| /* FIXME: Sanity check */ |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Isochronous transfers |
| */ |
| static int uhci_submit_isochronous(struct urb *urb) |
| { |
| struct uhci_td *td; |
| struct uhci *uhci = (struct uhci *)urb->dev->bus->hcpriv; |
| int i, ret, framenum; |
| int status, destination; |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| |
| status = TD_CTRL_ACTIVE | TD_CTRL_IOS; |
| destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe); |
| |
| ret = isochronous_find_start(urb); |
| if (ret) |
| return ret; |
| |
| framenum = urb->start_frame; |
| for (i = 0; i < urb->number_of_packets; i++, framenum++) { |
| if (!urb->iso_frame_desc[i].length) |
| continue; |
| |
| td = uhci_alloc_td(uhci, urb->dev); |
| if (!td) |
| return -ENOMEM; |
| |
| uhci_add_td_to_urb(urb, td); |
| uhci_fill_td(td, status, destination | ((urb->iso_frame_desc[i].length - 1) << 21), |
| urbp->transfer_buffer_dma_handle + urb->iso_frame_desc[i].offset); |
| |
| if (i + 1 >= urb->number_of_packets) |
| td->status |= TD_CTRL_IOC; |
| |
| uhci_insert_td_frame_list(uhci, td, framenum); |
| } |
| |
| return -EINPROGRESS; |
| } |
| |
| static int uhci_result_isochronous(struct urb *urb) |
| { |
| struct list_head *tmp, *head; |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| int status; |
| int i, ret = 0; |
| |
| urb->actual_length = 0; |
| |
| i = 0; |
| head = &urbp->td_list; |
| tmp = head->next; |
| while (tmp != head) { |
| struct uhci_td *td = list_entry(tmp, struct uhci_td, list); |
| int actlength; |
| |
| tmp = tmp->next; |
| |
| if (td->status & TD_CTRL_ACTIVE) |
| return -EINPROGRESS; |
| |
| actlength = uhci_actual_length(td->status); |
| urb->iso_frame_desc[i].actual_length = actlength; |
| urb->actual_length += actlength; |
| |
| status = uhci_map_status(uhci_status_bits(td->status), usb_pipeout(urb->pipe)); |
| urb->iso_frame_desc[i].status = status; |
| if (status) { |
| urb->error_count++; |
| ret = status; |
| } |
| |
| i++; |
| } |
| |
| return ret; |
| } |
| |
| static struct urb *uhci_find_urb_ep(struct uhci *uhci, struct urb *urb) |
| { |
| struct list_head *tmp, *head; |
| unsigned long flags; |
| struct urb *u = NULL; |
| |
| /* We don't match Isoc transfers since they are special */ |
| if (usb_pipeisoc(urb->pipe)) |
| return NULL; |
| |
| spin_lock_irqsave(&uhci->urb_list_lock, flags); |
| head = &uhci->urb_list; |
| tmp = head->next; |
| while (tmp != head) { |
| u = list_entry(tmp, struct urb, urb_list); |
| |
| tmp = tmp->next; |
| |
| if (u->dev == urb->dev && u->pipe == urb->pipe && |
| u->status == -EINPROGRESS) |
| goto out; |
| } |
| u = NULL; |
| |
| out: |
| spin_unlock_irqrestore(&uhci->urb_list_lock, flags); |
| |
| return u; |
| } |
| |
| static int uhci_submit_urb(struct urb *urb, int mem_flags) |
| { |
| int ret = -EINVAL; |
| struct uhci *uhci; |
| unsigned long flags; |
| struct urb *eurb; |
| int bustime; |
| |
| if (!urb) |
| return -EINVAL; |
| |
| if (!urb->dev || !urb->dev->bus || !urb->dev->bus->hcpriv) { |
| warn("uhci_submit_urb: urb %p belongs to disconnected device or bus?", urb); |
| return -ENODEV; |
| } |
| |
| uhci = (struct uhci *)urb->dev->bus->hcpriv; |
| |
| INIT_LIST_HEAD(&urb->urb_list); |
| usb_inc_dev_use(urb->dev); |
| |
| spin_lock_irqsave(&urb->lock, flags); |
| |
| if (urb->status == -EINPROGRESS || urb->status == -ECONNRESET || |
| urb->status == -ECONNABORTED) { |
| dbg("uhci_submit_urb: urb not available to submit (status = %d)", urb->status); |
| /* Since we can have problems on the out path */ |
| spin_unlock_irqrestore(&urb->lock, flags); |
| usb_dec_dev_use(urb->dev); |
| |
| return ret; |
| } |
| |
| if (!uhci_alloc_urb_priv(uhci, urb)) { |
| ret = -ENOMEM; |
| |
| goto out; |
| } |
| |
| eurb = uhci_find_urb_ep(uhci, urb); |
| if (eurb && !(urb->transfer_flags & USB_QUEUE_BULK)) { |
| ret = -ENXIO; |
| |
| goto out; |
| } |
| |
| /* Short circuit the virtual root hub */ |
| if (urb->dev == uhci->rh.dev) { |
| ret = rh_submit_urb(urb); |
| |
| goto out; |
| } |
| |
| switch (usb_pipetype(urb->pipe)) { |
| case PIPE_CONTROL: |
| ret = uhci_submit_control(urb); |
| break; |
| case PIPE_INTERRUPT: |
| if (urb->bandwidth == 0) { /* not yet checked/allocated */ |
| bustime = usb_check_bandwidth(urb->dev, urb); |
| if (bustime < 0) |
| ret = bustime; |
| else { |
| ret = uhci_submit_interrupt(urb); |
| if (ret == -EINPROGRESS) |
| usb_claim_bandwidth(urb->dev, urb, bustime, 0); |
| } |
| } else /* bandwidth is already set */ |
| ret = uhci_submit_interrupt(urb); |
| break; |
| case PIPE_BULK: |
| ret = uhci_submit_bulk(urb, eurb); |
| break; |
| case PIPE_ISOCHRONOUS: |
| if (urb->bandwidth == 0) { /* not yet checked/allocated */ |
| if (urb->number_of_packets <= 0) { |
| ret = -EINVAL; |
| break; |
| } |
| bustime = usb_check_bandwidth(urb->dev, urb); |
| if (bustime < 0) { |
| ret = bustime; |
| break; |
| } |
| |
| ret = uhci_submit_isochronous(urb); |
| if (ret == -EINPROGRESS) |
| usb_claim_bandwidth(urb->dev, urb, bustime, 1); |
| } else /* bandwidth is already set */ |
| ret = uhci_submit_isochronous(urb); |
| break; |
| } |
| |
| out: |
| urb->status = ret; |
| |
| spin_unlock_irqrestore(&urb->lock, flags); |
| |
| if (ret == -EINPROGRESS) { |
| spin_lock_irqsave(&uhci->urb_list_lock, flags); |
| /* We use _tail to make find_urb_ep more efficient */ |
| list_add_tail(&urb->urb_list, &uhci->urb_list); |
| spin_unlock_irqrestore(&uhci->urb_list_lock, flags); |
| |
| return 0; |
| } |
| |
| uhci_unlink_generic(uhci, urb); |
| uhci_call_completion(urb); |
| |
| return ret; |
| } |
| |
| /* |
| * Return the result of a transfer |
| * |
| * Must be called with urb_list_lock acquired |
| */ |
| static void uhci_transfer_result(struct uhci *uhci, struct urb *urb) |
| { |
| int ret = -EINVAL; |
| unsigned long flags; |
| struct urb_priv *urbp; |
| |
| /* The root hub is special */ |
| if (urb->dev == uhci->rh.dev) |
| return; |
| |
| spin_lock_irqsave(&urb->lock, flags); |
| |
| urbp = (struct urb_priv *)urb->hcpriv; |
| |
| if (urb->status != -EINPROGRESS) { |
| info("uhci_transfer_result: called for URB %p not in flight?", urb); |
| spin_unlock_irqrestore(&urb->lock, flags); |
| return; |
| } |
| |
| switch (usb_pipetype(urb->pipe)) { |
| case PIPE_CONTROL: |
| ret = uhci_result_control(urb); |
| break; |
| case PIPE_INTERRUPT: |
| ret = uhci_result_interrupt(urb); |
| break; |
| case PIPE_BULK: |
| ret = uhci_result_bulk(urb); |
| break; |
| case PIPE_ISOCHRONOUS: |
| ret = uhci_result_isochronous(urb); |
| break; |
| } |
| |
| urbp->status = ret; |
| |
| spin_unlock_irqrestore(&urb->lock, flags); |
| |
| if (ret == -EINPROGRESS) |
| return; |
| |
| switch (usb_pipetype(urb->pipe)) { |
| case PIPE_CONTROL: |
| case PIPE_BULK: |
| case PIPE_ISOCHRONOUS: |
| /* Release bandwidth for Interrupt or Isoc. transfers */ |
| /* Spinlock needed ? */ |
| if (urb->bandwidth) |
| usb_release_bandwidth(urb->dev, urb, 1); |
| uhci_unlink_generic(uhci, urb); |
| break; |
| case PIPE_INTERRUPT: |
| /* Interrupts are an exception */ |
| if (urb->interval) { |
| uhci_add_complete(urb); |
| return; /* <-- note return */ |
| } |
| |
| /* Release bandwidth for Interrupt or Isoc. transfers */ |
| /* Spinlock needed ? */ |
| if (urb->bandwidth) |
| usb_release_bandwidth(urb->dev, urb, 0); |
| uhci_unlink_generic(uhci, urb); |
| break; |
| default: |
| info("uhci_transfer_result: unknown pipe type %d for urb %p\n", |
| usb_pipetype(urb->pipe), urb); |
| } |
| |
| list_del_init(&urb->urb_list); |
| |
| uhci_add_complete(urb); |
| } |
| |
| static void uhci_unlink_generic(struct uhci *uhci, struct urb *urb) |
| { |
| struct list_head *head, *tmp; |
| struct urb_priv *urbp = urb->hcpriv; |
| |
| /* We can get called when urbp allocation fails, so check */ |
| if (!urbp) |
| return; |
| |
| uhci_dec_fsbr(uhci, urb); /* Safe since it checks */ |
| |
| head = &urbp->td_list; |
| tmp = head->next; |
| while (tmp != head) { |
| struct uhci_td *td = list_entry(tmp, struct uhci_td, list); |
| |
| tmp = tmp->next; |
| |
| /* Control and Isochronous ignore the toggle, so this */ |
| /* is safe for all types */ |
| if ((!(td->status & TD_CTRL_ACTIVE) && |
| (uhci_actual_length(td->status) < uhci_expected_length(td->info)) || |
| tmp == head)) { |
| usb_settoggle(urb->dev, uhci_endpoint(td->info), |
| uhci_packetout(td->info), |
| uhci_toggle(td->info) ^ 1); |
| } |
| } |
| |
| uhci_delete_queued_urb(uhci, urb); |
| |
| /* The interrupt loop will reclaim the QH's */ |
| uhci_remove_qh(uhci, urb); |
| } |
| |
| static int uhci_unlink_urb(struct urb *urb) |
| { |
| struct uhci *uhci; |
| unsigned long flags; |
| struct urb_priv *urbp = urb->hcpriv; |
| |
| if (!urb) |
| return -EINVAL; |
| |
| if (!urb->dev || !urb->dev->bus || !urb->dev->bus->hcpriv) |
| return -ENODEV; |
| |
| uhci = (struct uhci *)urb->dev->bus->hcpriv; |
| |
| /* Release bandwidth for Interrupt or Isoc. transfers */ |
| /* Spinlock needed ? */ |
| if (urb->bandwidth) { |
| switch (usb_pipetype(urb->pipe)) { |
| case PIPE_INTERRUPT: |
| usb_release_bandwidth(urb->dev, urb, 0); |
| break; |
| case PIPE_ISOCHRONOUS: |
| usb_release_bandwidth(urb->dev, urb, 1); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| if (urb->status != -EINPROGRESS) |
| return 0; |
| |
| spin_lock_irqsave(&uhci->urb_list_lock, flags); |
| list_del_init(&urb->urb_list); |
| spin_unlock_irqrestore(&uhci->urb_list_lock, flags); |
| |
| uhci_unlink_generic(uhci, urb); |
| |
| /* Short circuit the virtual root hub */ |
| if (urb->dev == uhci->rh.dev) { |
| rh_unlink_urb(urb); |
| uhci_call_completion(urb); |
| } else { |
| if (urb->transfer_flags & USB_ASYNC_UNLINK) { |
| /* urb_list is available now since we called */ |
| /* uhci_unlink_generic already */ |
| |
| urbp->status = urb->status = -ECONNABORTED; |
| |
| spin_lock_irqsave(&uhci->urb_remove_list_lock, flags); |
| |
| /* Check to see if the remove list is empty */ |
| if (list_empty(&uhci->urb_remove_list)) |
| uhci_set_next_interrupt(uhci); |
| |
| list_add(&urb->urb_list, &uhci->urb_remove_list); |
| |
| spin_unlock_irqrestore(&uhci->urb_remove_list_lock, flags); |
| } else { |
| urb->status = -ENOENT; |
| |
| if (in_interrupt()) { /* wait at least 1 frame */ |
| static int errorcount = 10; |
| |
| if (errorcount--) |
| dbg("uhci_unlink_urb called from interrupt for urb %p", urb); |
| udelay(1000); |
| } else |
| schedule_timeout(1+1*HZ/1000); |
| |
| uhci_call_completion(urb); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int uhci_fsbr_timeout(struct uhci *uhci, struct urb *urb) |
| { |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| struct list_head *head, *tmp; |
| |
| uhci_dec_fsbr(uhci, urb); |
| |
| /* There is a race with updating IOC in here, but it's not worth */ |
| /* trying to fix since this is merely an optimization. The only */ |
| /* time we'd lose is if the status of the packet got updated */ |
| /* and we'd be turning on FSBR next frame anyway, so it's a wash */ |
| urbp->fsbr_timeout = 1; |
| |
| head = &urbp->td_list; |
| tmp = head->next; |
| while (tmp != head) { |
| struct uhci_td *td = list_entry(tmp, struct uhci_td, list); |
| |
| tmp = tmp->next; |
| |
| if (td->status & TD_CTRL_ACTIVE) { |
| set_bit(TD_CTRL_IOC_BIT, &td->status); |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * uhci_get_current_frame_number() |
| * |
| * returns the current frame number for a USB bus/controller. |
| */ |
| static int uhci_get_current_frame_number(struct usb_device *dev) |
| { |
| struct uhci *uhci = (struct uhci *)dev->bus->hcpriv; |
| |
| return inw(uhci->io_addr + USBFRNUM); |
| } |
| |
| struct usb_operations uhci_device_operations = { |
| allocate: uhci_alloc_dev, |
| deallocate: uhci_free_dev, |
| get_frame_number: uhci_get_current_frame_number, |
| submit_urb: uhci_submit_urb, |
| unlink_urb: uhci_unlink_urb, |
| }; |
| |
| /* Virtual Root Hub */ |
| |
| static __u8 root_hub_dev_des[] = |
| { |
| 0x12, /* __u8 bLength; */ |
| 0x01, /* __u8 bDescriptorType; Device */ |
| 0x00, /* __u16 bcdUSB; v1.0 */ |
| 0x01, |
| 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ |
| 0x00, /* __u8 bDeviceSubClass; */ |
| 0x00, /* __u8 bDeviceProtocol; */ |
| 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ |
| 0x00, /* __u16 idVendor; */ |
| 0x00, |
| 0x00, /* __u16 idProduct; */ |
| 0x00, |
| 0x00, /* __u16 bcdDevice; */ |
| 0x00, |
| 0x00, /* __u8 iManufacturer; */ |
| 0x02, /* __u8 iProduct; */ |
| 0x01, /* __u8 iSerialNumber; */ |
| 0x01 /* __u8 bNumConfigurations; */ |
| }; |
| |
| |
| /* Configuration descriptor */ |
| static __u8 root_hub_config_des[] = |
| { |
| 0x09, /* __u8 bLength; */ |
| 0x02, /* __u8 bDescriptorType; Configuration */ |
| 0x19, /* __u16 wTotalLength; */ |
| 0x00, |
| 0x01, /* __u8 bNumInterfaces; */ |
| 0x01, /* __u8 bConfigurationValue; */ |
| 0x00, /* __u8 iConfiguration; */ |
| 0x40, /* __u8 bmAttributes; |
| Bit 7: Bus-powered, 6: Self-powered, |
| Bit 5 Remote-wakeup, 4..0: resvd */ |
| 0x00, /* __u8 MaxPower; */ |
| |
| /* interface */ |
| 0x09, /* __u8 if_bLength; */ |
| 0x04, /* __u8 if_bDescriptorType; Interface */ |
| 0x00, /* __u8 if_bInterfaceNumber; */ |
| 0x00, /* __u8 if_bAlternateSetting; */ |
| 0x01, /* __u8 if_bNumEndpoints; */ |
| 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ |
| 0x00, /* __u8 if_bInterfaceSubClass; */ |
| 0x00, /* __u8 if_bInterfaceProtocol; */ |
| 0x00, /* __u8 if_iInterface; */ |
| |
| /* endpoint */ |
| 0x07, /* __u8 ep_bLength; */ |
| 0x05, /* __u8 ep_bDescriptorType; Endpoint */ |
| 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ |
| 0x03, /* __u8 ep_bmAttributes; Interrupt */ |
| 0x08, /* __u16 ep_wMaxPacketSize; 8 Bytes */ |
| 0x00, |
| 0xff /* __u8 ep_bInterval; 255 ms */ |
| }; |
| |
| static __u8 root_hub_hub_des[] = |
| { |
| 0x09, /* __u8 bLength; */ |
| 0x29, /* __u8 bDescriptorType; Hub-descriptor */ |
| 0x02, /* __u8 bNbrPorts; */ |
| 0x00, /* __u16 wHubCharacteristics; */ |
| 0x00, |
| 0x01, /* __u8 bPwrOn2pwrGood; 2ms */ |
| 0x00, /* __u8 bHubContrCurrent; 0 mA */ |
| 0x00, /* __u8 DeviceRemovable; *** 7 Ports max *** */ |
| 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */ |
| }; |
| |
| /* prepare Interrupt pipe transaction data; HUB INTERRUPT ENDPOINT */ |
| static int rh_send_irq(struct urb *urb) |
| { |
| int i, len = 1; |
| struct uhci *uhci = (struct uhci *)urb->dev->bus->hcpriv; |
| unsigned int io_addr = uhci->io_addr; |
| __u16 data = 0; |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| |
| for (i = 0; i < uhci->rh.numports; i++) { |
| data |= ((inw(io_addr + USBPORTSC1 + i * 2) & 0xa) > 0 ? (1 << (i + 1)) : 0); |
| len = (i + 1) / 8 + 1; |
| } |
| |
| *(__u16 *) urb->transfer_buffer = cpu_to_le16(data); |
| urb->actual_length = len; |
| urbp->status = 0; |
| |
| if ((data > 0) && (uhci->rh.send != 0)) { |
| dbg("root-hub INT complete: port1: %x port2: %x data: %x", |
| inw(io_addr + USBPORTSC1), inw(io_addr + USBPORTSC2), data); |
| uhci_call_completion(urb); |
| } |
| |
| return 0; |
| } |
| |
| /* Virtual Root Hub INTs are polled by this timer every "interval" ms */ |
| static int rh_init_int_timer(struct urb *urb); |
| |
| static void rh_int_timer_do(unsigned long ptr) |
| { |
| struct urb *urb = (struct urb *)ptr; |
| struct uhci *uhci = (struct uhci *)urb->dev->bus->hcpriv; |
| struct list_head list, *tmp, *head; |
| unsigned long flags; |
| |
| if (uhci->rh.send) |
| rh_send_irq(urb); |
| |
| INIT_LIST_HEAD(&list); |
| |
| spin_lock_irqsave(&uhci->urb_list_lock, flags); |
| head = &uhci->urb_list; |
| |
| tmp = head->next; |
| while (tmp != head) { |
| struct urb *u = list_entry(tmp, struct urb, urb_list); |
| struct urb_priv *urbp = (struct urb_priv *)u->hcpriv; |
| |
| tmp = tmp->next; |
| |
| /* Check if the FSBR timed out */ |
| if (urbp->fsbr && !urbp->fsbr_timeout && time_after_eq(jiffies, urbp->fsbrtime + IDLE_TIMEOUT)) |
| uhci_fsbr_timeout(uhci, u); |
| |
| /* Check if the URB timed out */ |
| if (u->timeout && time_after_eq(jiffies, urbp->inserttime + u->timeout)) { |
| list_del(&u->urb_list); |
| list_add_tail(&u->urb_list, &list); |
| } |
| } |
| spin_unlock_irqrestore(&uhci->urb_list_lock, flags); |
| |
| head = &list; |
| tmp = head->next; |
| while (tmp != head) { |
| struct urb *u = list_entry(tmp, struct urb, urb_list); |
| |
| tmp = tmp->next; |
| |
| u->transfer_flags |= USB_ASYNC_UNLINK | USB_TIMEOUT_KILLED; |
| uhci_unlink_urb(u); |
| } |
| |
| /* enter global suspend if nothing connected */ |
| if (!uhci->is_suspended && !ports_active(uhci)) |
| suspend_hc(uhci); |
| |
| rh_init_int_timer(urb); |
| } |
| |
| /* Root Hub INTs are polled by this timer */ |
| static int rh_init_int_timer(struct urb *urb) |
| { |
| struct uhci *uhci = (struct uhci *)urb->dev->bus->hcpriv; |
| |
| uhci->rh.interval = urb->interval; |
| init_timer(&uhci->rh.rh_int_timer); |
| uhci->rh.rh_int_timer.function = rh_int_timer_do; |
| uhci->rh.rh_int_timer.data = (unsigned long)urb; |
| uhci->rh.rh_int_timer.expires = jiffies + (HZ * (urb->interval < 30 ? 30 : urb->interval)) / 1000; |
| add_timer(&uhci->rh.rh_int_timer); |
| |
| return 0; |
| } |
| |
| #define OK(x) len = (x); break |
| |
| #define CLR_RH_PORTSTAT(x) \ |
| status = inw(io_addr + USBPORTSC1 + 2 * (wIndex-1)); \ |
| status = (status & 0xfff5) & ~(x); \ |
| outw(status, io_addr + USBPORTSC1 + 2 * (wIndex-1)) |
| |
| #define SET_RH_PORTSTAT(x) \ |
| status = inw(io_addr + USBPORTSC1 + 2 * (wIndex-1)); \ |
| status = (status & 0xfff5) | (x); \ |
| outw(status, io_addr + USBPORTSC1 + 2 * (wIndex-1)) |
| |
| |
| /* Root Hub Control Pipe */ |
| static int rh_submit_urb(struct urb *urb) |
| { |
| struct uhci *uhci = (struct uhci *)urb->dev->bus->hcpriv; |
| unsigned int pipe = urb->pipe; |
| struct usb_ctrlrequest *cmd = (struct usb_ctrlrequest *)urb->setup_packet; |
| void *data = urb->transfer_buffer; |
| int leni = urb->transfer_buffer_length; |
| int len = 0; |
| int status = 0; |
| int stat = 0; |
| int i; |
| unsigned int io_addr = uhci->io_addr; |
| __u16 cstatus; |
| __u16 bmRType_bReq; |
| __u16 wValue; |
| __u16 wIndex; |
| __u16 wLength; |
| |
| if (usb_pipetype(pipe) == PIPE_INTERRUPT) { |
| uhci->rh.urb = urb; |
| uhci->rh.send = 1; |
| uhci->rh.interval = urb->interval; |
| rh_init_int_timer(urb); |
| |
| return -EINPROGRESS; |
| } |
| |
| bmRType_bReq = cmd->bRequestType | cmd->bRequest << 8; |
| wValue = le16_to_cpu(cmd->wValue); |
| wIndex = le16_to_cpu(cmd->wIndex); |
| wLength = le16_to_cpu(cmd->wLength); |
| |
| for (i = 0; i < 8; i++) |
| uhci->rh.c_p_r[i] = 0; |
| |
| switch (bmRType_bReq) { |
| /* Request Destination: |
| without flags: Device, |
| RH_INTERFACE: interface, |
| RH_ENDPOINT: endpoint, |
| RH_CLASS means HUB here, |
| RH_OTHER | RH_CLASS almost ever means HUB_PORT here |
| */ |
| |
| case RH_GET_STATUS: |
| *(__u16 *)data = cpu_to_le16(1); |
| OK(2); |
| case RH_GET_STATUS | RH_INTERFACE: |
| *(__u16 *)data = cpu_to_le16(0); |
| OK(2); |
| case RH_GET_STATUS | RH_ENDPOINT: |
| *(__u16 *)data = cpu_to_le16(0); |
| OK(2); |
| case RH_GET_STATUS | RH_CLASS: |
| *(__u32 *)data = cpu_to_le32(0); |
| OK(4); /* hub power */ |
| case RH_GET_STATUS | RH_OTHER | RH_CLASS: |
| status = inw(io_addr + USBPORTSC1 + 2 * (wIndex - 1)); |
| cstatus = ((status & USBPORTSC_CSC) >> (1 - 0)) | |
| ((status & USBPORTSC_PEC) >> (3 - 1)) | |
| (uhci->rh.c_p_r[wIndex - 1] << (0 + 4)); |
| status = (status & USBPORTSC_CCS) | |
| ((status & USBPORTSC_PE) >> (2 - 1)) | |
| ((status & USBPORTSC_SUSP) >> (12 - 2)) | |
| ((status & USBPORTSC_PR) >> (9 - 4)) | |
| (1 << 8) | /* power on */ |
| ((status & USBPORTSC_LSDA) << (-8 + 9)); |
| |
| *(__u16 *)data = cpu_to_le16(status); |
| *(__u16 *)(data + 2) = cpu_to_le16(cstatus); |
| OK(4); |
| case RH_CLEAR_FEATURE | RH_ENDPOINT: |
| switch (wValue) { |
| case RH_ENDPOINT_STALL: |
| OK(0); |
| } |
| break; |
| case RH_CLEAR_FEATURE | RH_CLASS: |
| switch (wValue) { |
| case RH_C_HUB_OVER_CURRENT: |
| OK(0); /* hub power over current */ |
| } |
| break; |
| case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: |
| switch (wValue) { |
| case RH_PORT_ENABLE: |
| CLR_RH_PORTSTAT(USBPORTSC_PE); |
| OK(0); |
| case RH_PORT_SUSPEND: |
| CLR_RH_PORTSTAT(USBPORTSC_SUSP); |
| OK(0); |
| case RH_PORT_POWER: |
| OK(0); /* port power */ |
| case RH_C_PORT_CONNECTION: |
| SET_RH_PORTSTAT(USBPORTSC_CSC); |
| OK(0); |
| case RH_C_PORT_ENABLE: |
| SET_RH_PORTSTAT(USBPORTSC_PEC); |
| OK(0); |
| case RH_C_PORT_SUSPEND: |
| /*** WR_RH_PORTSTAT(RH_PS_PSSC); */ |
| OK(0); |
| case RH_C_PORT_OVER_CURRENT: |
| OK(0); /* port power over current */ |
| case RH_C_PORT_RESET: |
| uhci->rh.c_p_r[wIndex - 1] = 0; |
| OK(0); |
| } |
| break; |
| case RH_SET_FEATURE | RH_OTHER | RH_CLASS: |
| switch (wValue) { |
| case RH_PORT_SUSPEND: |
| SET_RH_PORTSTAT(USBPORTSC_SUSP); |
| OK(0); |
| case RH_PORT_RESET: |
| SET_RH_PORTSTAT(USBPORTSC_PR); |
| wait_ms(50); /* USB v1.1 7.1.7.3 */ |
| uhci->rh.c_p_r[wIndex - 1] = 1; |
| CLR_RH_PORTSTAT(USBPORTSC_PR); |
| udelay(10); |
| SET_RH_PORTSTAT(USBPORTSC_PE); |
| wait_ms(10); |
| SET_RH_PORTSTAT(0xa); |
| OK(0); |
| case RH_PORT_POWER: |
| OK(0); /* port power ** */ |
| case RH_PORT_ENABLE: |
| SET_RH_PORTSTAT(USBPORTSC_PE); |
| OK(0); |
| } |
| break; |
| case RH_SET_ADDRESS: |
| uhci->rh.devnum = wValue; |
| OK(0); |
| case RH_GET_DESCRIPTOR: |
| switch ((wValue & 0xff00) >> 8) { |
| case 0x01: /* device descriptor */ |
| len = min_t(unsigned int, leni, |
| min_t(unsigned int, |
| sizeof(root_hub_dev_des), wLength)); |
| memcpy(data, root_hub_dev_des, len); |
| OK(len); |
| case 0x02: /* configuration descriptor */ |
| len = min_t(unsigned int, leni, |
| min_t(unsigned int, |
| sizeof(root_hub_config_des), wLength)); |
| memcpy (data, root_hub_config_des, len); |
| OK(len); |
| case 0x03: /* string descriptors */ |
| len = usb_root_hub_string (wValue & 0xff, |
| uhci->io_addr, "UHCI-alt", |
| data, wLength); |
| if (len > 0) { |
| OK(min_t(int, leni, len)); |
| } else |
| stat = -EPIPE; |
| } |
| break; |
| case RH_GET_DESCRIPTOR | RH_CLASS: |
| root_hub_hub_des[2] = uhci->rh.numports; |
| len = min_t(unsigned int, leni, |
| min_t(unsigned int, sizeof(root_hub_hub_des), wLength)); |
| memcpy(data, root_hub_hub_des, len); |
| OK(len); |
| case RH_GET_CONFIGURATION: |
| *(__u8 *)data = 0x01; |
| OK(1); |
| case RH_SET_CONFIGURATION: |
| OK(0); |
| case RH_GET_INTERFACE | RH_INTERFACE: |
| *(__u8 *)data = 0x00; |
| OK(1); |
| case RH_SET_INTERFACE | RH_INTERFACE: |
| OK(0); |
| default: |
| stat = -EPIPE; |
| } |
| |
| urb->actual_length = len; |
| |
| return stat; |
| } |
| |
| static int rh_unlink_urb(struct urb *urb) |
| { |
| struct uhci *uhci = (struct uhci *)urb->dev->bus->hcpriv; |
| |
| if (uhci->rh.urb == urb) { |
| urb->status = -ENOENT; |
| uhci->rh.send = 0; |
| uhci->rh.urb = NULL; |
| del_timer(&uhci->rh.rh_int_timer); |
| } |
| return 0; |
| } |
| |
| static void uhci_free_pending_qhs(struct uhci *uhci) |
| { |
| struct list_head *tmp, *head; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&uhci->qh_remove_list_lock, flags); |
| head = &uhci->qh_remove_list; |
| tmp = head->next; |
| while (tmp != head) { |
| struct uhci_qh *qh = list_entry(tmp, struct uhci_qh, remove_list); |
| |
| tmp = tmp->next; |
| |
| list_del_init(&qh->remove_list); |
| |
| uhci_free_qh(uhci, qh); |
| } |
| spin_unlock_irqrestore(&uhci->qh_remove_list_lock, flags); |
| } |
| |
| static void uhci_call_completion(struct urb *urb) |
| { |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| struct usb_device *dev = urb->dev; |
| struct uhci *uhci = (struct uhci *)dev->bus->hcpriv; |
| int is_ring = 0, killed, resubmit_interrupt, status; |
| struct urb *nurb; |
| |
| killed = (urb->status == -ENOENT || urb->status == -ECONNABORTED || |
| urb->status == -ECONNRESET); |
| resubmit_interrupt = (usb_pipetype(urb->pipe) == PIPE_INTERRUPT && |
| urb->interval && !killed); |
| |
| nurb = urb->next; |
| if (nurb && !killed) { |
| int count = 0; |
| |
| while (nurb && nurb != urb && count < MAX_URB_LOOP) { |
| if (nurb->status == -ENOENT || |
| nurb->status == -ECONNABORTED || |
| nurb->status == -ECONNRESET) { |
| killed = 1; |
| break; |
| } |
| |
| nurb = nurb->next; |
| count++; |
| } |
| |
| if (count == MAX_URB_LOOP) |
| err("uhci_call_completion: too many linked URB's, loop? (first loop)"); |
| |
| /* Check to see if chain is a ring */ |
| is_ring = (nurb == urb); |
| } |
| |
| status = urbp->status; |
| if (!resubmit_interrupt) |
| /* We don't need urb_priv anymore */ |
| uhci_destroy_urb_priv(urb); |
| |
| if (!killed) |
| urb->status = status; |
| |
| if (urbp->transfer_buffer_dma_handle) |
| pci_dma_sync_single(uhci->dev, urbp->transfer_buffer_dma_handle, |
| urb->transfer_buffer_length, usb_pipein(urb->pipe) ? |
| PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE); |
| |
| if (urbp->setup_packet_dma_handle) |
| pci_dma_sync_single(uhci->dev, urbp->setup_packet_dma_handle, |
| sizeof(struct usb_ctrlrequest), PCI_DMA_TODEVICE); |
| |
| urb->dev = NULL; |
| if (urb->complete) |
| urb->complete(urb); |
| |
| if (resubmit_interrupt) { |
| urb->dev = dev; |
| uhci_reset_interrupt(urb); |
| } else { |
| if (is_ring && !killed) { |
| urb->dev = dev; |
| uhci_submit_urb(urb, GFP_KERNEL); |
| } else { |
| /* We decrement the usage count after we're done */ |
| /* with everything */ |
| usb_dec_dev_use(dev); |
| } |
| } |
| } |
| |
| static void uhci_finish_completion(struct uhci *uhci) |
| { |
| struct list_head *tmp, *head; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&uhci->complete_list_lock, flags); |
| head = &uhci->complete_list; |
| tmp = head->next; |
| while (tmp != head) { |
| struct urb_priv *urbp = list_entry(tmp, struct urb_priv, complete_list); |
| struct urb *urb = urbp->urb; |
| |
| tmp = tmp->next; |
| |
| list_del_init(&urbp->complete_list); |
| |
| uhci_call_completion(urb); |
| } |
| spin_unlock_irqrestore(&uhci->complete_list_lock, flags); |
| } |
| |
| static void uhci_remove_pending_qhs(struct uhci *uhci) |
| { |
| struct list_head *tmp, *head; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&uhci->urb_remove_list_lock, flags); |
| head = &uhci->urb_remove_list; |
| tmp = head->next; |
| while (tmp != head) { |
| struct urb *urb = list_entry(tmp, struct urb, urb_list); |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| |
| tmp = tmp->next; |
| |
| list_del_init(&urb->urb_list); |
| |
| urbp->status = urb->status = -ECONNRESET; |
| uhci_call_completion(urb); |
| } |
| spin_unlock_irqrestore(&uhci->urb_remove_list_lock, flags); |
| } |
| |
| static void uhci_interrupt(int irq, void *__uhci, struct pt_regs *regs) |
| { |
| struct uhci *uhci = __uhci; |
| unsigned int io_addr = uhci->io_addr; |
| unsigned short status; |
| struct list_head *tmp, *head; |
| |
| /* |
| * Read the interrupt status, and write it back to clear the |
| * interrupt cause |
| */ |
| status = inw(io_addr + USBSTS); |
| if (!status) /* shared interrupt, not mine */ |
| return; |
| outw(status, io_addr + USBSTS); /* Clear it */ |
| |
| if (status & ~(USBSTS_USBINT | USBSTS_ERROR | USBSTS_RD)) { |
| if (status & USBSTS_HSE) |
| err("%x: host system error, PCI problems?", io_addr); |
| if (status & USBSTS_HCPE) |
| err("%x: host controller process error. something bad happened", io_addr); |
| if ((status & USBSTS_HCH) && !uhci->is_suspended) { |
| err("%x: host controller halted. very bad", io_addr); |
| /* FIXME: Reset the controller, fix the offending TD */ |
| } |
| } |
| |
| if (status & USBSTS_RD) |
| wakeup_hc(uhci); |
| |
| uhci_free_pending_qhs(uhci); |
| |
| uhci_remove_pending_qhs(uhci); |
| |
| uhci_clear_next_interrupt(uhci); |
| |
| /* Walk the list of pending URB's to see which ones completed */ |
| spin_lock(&uhci->urb_list_lock); |
| head = &uhci->urb_list; |
| tmp = head->next; |
| while (tmp != head) { |
| struct urb *urb = list_entry(tmp, struct urb, urb_list); |
| |
| tmp = tmp->next; |
| |
| /* Checks the status and does all of the magic necessary */ |
| uhci_transfer_result(uhci, urb); |
| } |
| spin_unlock(&uhci->urb_list_lock); |
| |
| uhci_finish_completion(uhci); |
| } |
| |
| static void reset_hc(struct uhci *uhci) |
| { |
| unsigned int io_addr = uhci->io_addr; |
| |
| /* Global reset for 50ms */ |
| outw(USBCMD_GRESET, io_addr + USBCMD); |
| wait_ms(50); |
| outw(0, io_addr + USBCMD); |
| wait_ms(10); |
| } |
| |
| static void suspend_hc(struct uhci *uhci) |
| { |
| unsigned int io_addr = uhci->io_addr; |
| |
| dbg("%x: suspend_hc", io_addr); |
| |
| outw(USBCMD_EGSM, io_addr + USBCMD); |
| |
| uhci->is_suspended = 1; |
| } |
| |
| static void wakeup_hc(struct uhci *uhci) |
| { |
| unsigned int io_addr = uhci->io_addr; |
| unsigned int status; |
| |
| dbg("%x: wakeup_hc", io_addr); |
| |
| outw(0, io_addr + USBCMD); |
| |
| /* wait for EOP to be sent */ |
| status = inw(io_addr + USBCMD); |
| while (status & USBCMD_FGR) |
| status = inw(io_addr + USBCMD); |
| |
| uhci->is_suspended = 0; |
| |
| /* Run and mark it configured with a 64-byte max packet */ |
| outw(USBCMD_RS | USBCMD_CF | USBCMD_MAXP, io_addr + USBCMD); |
| } |
| |
| static int ports_active(struct uhci *uhci) |
| { |
| unsigned int io_addr = uhci->io_addr; |
| int connection = 0; |
| int i; |
| |
| for (i = 0; i < uhci->rh.numports; i++) |
| connection |= (inw(io_addr + USBPORTSC1 + i * 2) & 0x1); |
| |
| return connection; |
| } |
| |
| static void start_hc(struct uhci *uhci) |
| { |
| unsigned int io_addr = uhci->io_addr; |
| int timeout = 1000; |
| |
| /* |
| * Reset the HC - this will force us to get a |
| * new notification of any already connected |
| * ports due to the virtual disconnect that it |
| * implies. |
| */ |
| outw(USBCMD_HCRESET, io_addr + USBCMD); |
| while (inw(io_addr + USBCMD) & USBCMD_HCRESET) { |
| if (!--timeout) { |
| printk(KERN_ERR "uhci: USBCMD_HCRESET timed out!\n"); |
| break; |
| } |
| } |
| |
| /* Turn on all interrupts */ |
| outw(USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP, |
| io_addr + USBINTR); |
| |
| /* Start at frame 0 */ |
| outw(0, io_addr + USBFRNUM); |
| outl(uhci->fl->dma_handle, io_addr + USBFLBASEADD); |
| |
| /* Run and mark it configured with a 64-byte max packet */ |
| outw(USBCMD_RS | USBCMD_CF | USBCMD_MAXP, io_addr + USBCMD); |
| } |
| |
| #ifdef CONFIG_PROC_FS |
| static int uhci_num = 0; |
| #endif |
| |
| static void free_uhci(struct uhci *uhci) |
| { |
| kfree(uhci); |
| } |
| |
| /* |
| * De-allocate all resources.. |
| */ |
| static void release_uhci(struct uhci *uhci) |
| { |
| int i; |
| #ifdef CONFIG_PROC_FS |
| char buf[8]; |
| #endif |
| |
| if (uhci->irq >= 0) { |
| free_irq(uhci->irq, uhci); |
| uhci->irq = -1; |
| } |
| |
| for (i = 0; i < UHCI_NUM_SKELQH; i++) |
| if (uhci->skelqh[i]) { |
| uhci_free_qh(uhci, uhci->skelqh[i]); |
| uhci->skelqh[i] = NULL; |
| } |
| |
| for (i = 0; i < UHCI_NUM_SKELTD; i++) |
| if (uhci->skeltd[i]) { |
| uhci_free_td(uhci, uhci->skeltd[i]); |
| uhci->skeltd[i] = NULL; |
| } |
| |
| if (uhci->qh_pool) { |
| pci_pool_destroy(uhci->qh_pool); |
| uhci->qh_pool = NULL; |
| } |
| |
| if (uhci->td_pool) { |
| pci_pool_destroy(uhci->td_pool); |
| uhci->td_pool = NULL; |
| } |
| |
| if (uhci->fl) { |
| pci_free_consistent(uhci->dev, sizeof(*uhci->fl), uhci->fl, uhci->fl->dma_handle); |
| uhci->fl = NULL; |
| } |
| |
| if (uhci->bus) { |
| usb_free_bus(uhci->bus); |
| uhci->bus = NULL; |
| } |
| |
| #ifdef CONFIG_PROC_FS |
| if (uhci->proc_entry) { |
| sprintf(buf, "hc%d", uhci->num); |
| |
| remove_proc_entry(buf, uhci_proc_root); |
| uhci->proc_entry = NULL; |
| } |
| #endif |
| |
| free_uhci(uhci); |
| } |
| |
| /* |
| * Allocate a frame list, and then setup the skeleton |
| * |
| * The hardware doesn't really know any difference |
| * in the queues, but the order does matter for the |
| * protocols higher up. The order is: |
| * |
| * - any isochronous events handled before any |
| * of the queues. We don't do that here, because |
| * we'll create the actual TD entries on demand. |
| * - The first queue is the interrupt queue. |
| * - The second queue is the control queue, split into low and high speed |
| * - The third queue is bulk queue. |
| * - The fourth queue is the bandwidth reclamation queue, which loops back |
| * to the high speed control queue. |
| */ |
| static int alloc_uhci(struct pci_dev *dev, unsigned int io_addr, unsigned int io_size) |
| { |
| struct uhci *uhci; |
| int retval; |
| char buf[8], *bufp = buf; |
| int i, port; |
| struct usb_bus *bus; |
| dma_addr_t dma_handle; |
| #ifdef CONFIG_PROC_FS |
| struct proc_dir_entry *ent; |
| #endif |
| |
| retval = -ENODEV; |
| if (pci_enable_device(dev) < 0) { |
| err("couldn't enable PCI device"); |
| goto err_enable_device; |
| } |
| |
| if (!dev->irq) { |
| err("found UHCI device with no IRQ assigned. check BIOS settings!"); |
| goto err_invalid_irq; |
| } |
| |
| if (!pci_dma_supported(dev, 0xFFFFFFFF)) { |
| err("PCI subsystem doesn't support 32 bit addressing?"); |
| goto err_pci_dma_supported; |
| } |
| |
| retval = -EBUSY; |
| if (!request_region(io_addr, io_size, "usb-uhci")) { |
| err("couldn't allocate I/O range %x - %x", io_addr, |
| io_addr + io_size - 1); |
| goto err_request_region; |
| } |
| |
| pci_set_master(dev); |
| |
| #ifndef __sparc__ |
| sprintf(buf, "%d", dev->irq); |
| #else |
| bufp = __irq_itoa(dev->irq); |
| #endif |
| printk(KERN_INFO __FILE__ ": USB UHCI at I/O 0x%x, IRQ %s\n", |
| io_addr, bufp); |
| |
| if (pci_set_dma_mask(dev, 0xFFFFFFFF)) { |
| err("couldn't set PCI dma mask"); |
| retval = -ENODEV; |
| goto err_pci_set_dma_mask; |
| } |
| |
| uhci = kmalloc(sizeof(*uhci), GFP_KERNEL); |
| if (!uhci) { |
| err("couldn't allocate uhci structure"); |
| retval = -ENOMEM; |
| goto err_alloc_uhci; |
| } |
| |
| uhci->dev = dev; |
| uhci->io_addr = io_addr; |
| uhci->io_size = io_size; |
| pci_set_drvdata(dev, uhci); |
| |
| #ifdef CONFIG_PROC_FS |
| uhci->num = uhci_num++; |
| |
| sprintf(buf, "hc%d", uhci->num); |
| |
| ent = create_proc_entry(buf, S_IFREG|S_IRUGO|S_IWUSR, uhci_proc_root); |
| if (!ent) { |
| err("couldn't create uhci proc entry"); |
| retval = -ENOMEM; |
| goto err_create_proc_entry; |
| } |
| |
| ent->data = uhci; |
| ent->proc_fops = &uhci_proc_operations; |
| ent->size = 0; |
| uhci->proc_entry = ent; |
| #endif |
| |
| /* Reset here so we don't get any interrupts from an old setup */ |
| /* or broken setup */ |
| reset_hc(uhci); |
| |
| spin_lock_init(&uhci->qh_remove_list_lock); |
| INIT_LIST_HEAD(&uhci->qh_remove_list); |
| |
| spin_lock_init(&uhci->urb_remove_list_lock); |
| INIT_LIST_HEAD(&uhci->urb_remove_list); |
| |
| spin_lock_init(&uhci->urb_list_lock); |
| INIT_LIST_HEAD(&uhci->urb_list); |
| |
| spin_lock_init(&uhci->complete_list_lock); |
| INIT_LIST_HEAD(&uhci->complete_list); |
| |
| spin_lock_init(&uhci->frame_list_lock); |
| |
| /* We need exactly one page (per UHCI specs), how convenient */ |
| /* We assume that one page is atleast 4k (1024 frames * 4 bytes) */ |
| #if PAGE_SIZE < (4 * 1024) |
| #error PAGE_SIZE is not atleast 4k |
| #endif |
| uhci->fl = pci_alloc_consistent(uhci->dev, sizeof(*uhci->fl), &dma_handle); |
| if (!uhci->fl) { |
| err("unable to allocate consistent memory for frame list"); |
| goto err_alloc_fl; |
| } |
| |
| memset((void *)uhci->fl, 0, sizeof(*uhci->fl)); |
| |
| uhci->fl->dma_handle = dma_handle; |
| |
| uhci->td_pool = pci_pool_create("uhci_td", uhci->dev, |
| sizeof(struct uhci_td), 16, 0, GFP_DMA | GFP_ATOMIC); |
| if (!uhci->td_pool) { |
| err("unable to create td pci_pool"); |
| goto err_create_td_pool; |
| } |
| |
| uhci->qh_pool = pci_pool_create("uhci_qh", uhci->dev, |
| sizeof(struct uhci_qh), 16, 0, GFP_DMA | GFP_ATOMIC); |
| if (!uhci->qh_pool) { |
| err("unable to create qh pci_pool"); |
| goto err_create_qh_pool; |
| } |
| |
| bus = usb_alloc_bus(&uhci_device_operations); |
| if (!bus) { |
| err("unable to allocate bus"); |
| goto err_alloc_bus; |
| } |
| |
| uhci->bus = bus; |
| bus->hcpriv = uhci; |
| |
| usb_register_bus(uhci->bus); |
| |
| /* Initialize the root hub */ |
| |
| /* UHCI specs says devices must have 2 ports, but goes on to say */ |
| /* they may have more but give no way to determine how many they */ |
| /* have. However, according to the UHCI spec, Bit 7 is always set */ |
| /* to 1. So we try to use this to our advantage */ |
| for (port = 0; port < (uhci->io_size - 0x10) / 2; port++) { |
| unsigned int portstatus; |
| |
| portstatus = inw(uhci->io_addr + 0x10 + (port * 2)); |
| if (!(portstatus & 0x0080)) |
| break; |
| } |
| if (debug) |
| info("detected %d ports", port); |
| |
| /* This is experimental so anything less than 2 or greater than 8 is */ |
| /* something weird and we'll ignore it */ |
| if (port < 2 || port > 8) { |
| info("port count misdetected? forcing to 2 ports"); |
| port = 2; |
| } |
| |
| uhci->rh.numports = port; |
| |
| uhci->bus->root_hub = uhci->rh.dev = usb_alloc_dev(NULL, uhci->bus); |
| if (!uhci->rh.dev) { |
| err("unable to allocate root hub"); |
| goto err_alloc_root_hub; |
| } |
| |
| uhci->skeltd[0] = uhci_alloc_td(uhci, uhci->rh.dev); |
| if (!uhci->skeltd[0]) { |
| err("unable to allocate TD 0"); |
| goto err_alloc_skeltd; |
| } |
| |
| /* |
| * 9 Interrupt queues; link int2 to int1, int4 to int2, etc |
| * then link int1 to control and control to bulk |
| */ |
| for (i = 1; i < 9; i++) { |
| struct uhci_td *td; |
| |
| td = uhci->skeltd[i] = uhci_alloc_td(uhci, uhci->rh.dev); |
| if (!td) { |
| err("unable to allocate TD %d", i); |
| goto err_alloc_skeltd; |
| } |
| |
| uhci_fill_td(td, 0, (UHCI_NULL_DATA_SIZE << 21) | (0x7f << 8) | USB_PID_IN, 0); |
| td->link = uhci->skeltd[i - 1]->dma_handle; |
| } |
| |
| uhci->skel_term_td = uhci_alloc_td(uhci, uhci->rh.dev); |
| if (!uhci->skel_term_td) { |
| err("unable to allocate skel TD term"); |
| goto err_alloc_skeltd; |
| } |
| |
| for (i = 0; i < UHCI_NUM_SKELQH; i++) { |
| uhci->skelqh[i] = uhci_alloc_qh(uhci, uhci->rh.dev); |
| if (!uhci->skelqh[i]) { |
| err("unable to allocate QH %d", i); |
| goto err_alloc_skelqh; |
| } |
| } |
| |
| uhci_fill_td(uhci->skel_int1_td, 0, (UHCI_NULL_DATA_SIZE << 21) | (0x7f << 8) | USB_PID_IN, 0); |
| uhci->skel_int1_td->link = uhci->skel_ls_control_qh->dma_handle | UHCI_PTR_QH; |
| |
| uhci->skel_ls_control_qh->link = uhci->skel_hs_control_qh->dma_handle | UHCI_PTR_QH; |
| uhci->skel_ls_control_qh->element = UHCI_PTR_TERM; |
| |
| uhci->skel_hs_control_qh->link = uhci->skel_bulk_qh->dma_handle | UHCI_PTR_QH; |
| uhci->skel_hs_control_qh->element = UHCI_PTR_TERM; |
| |
| uhci->skel_bulk_qh->link = uhci->skel_term_qh->dma_handle | UHCI_PTR_QH; |
| uhci->skel_bulk_qh->element = UHCI_PTR_TERM; |
| |
| /* This dummy TD is to work around a bug in Intel PIIX controllers */ |
| uhci_fill_td(uhci->skel_term_td, 0, (UHCI_NULL_DATA_SIZE << 21) | (0x7f << 8) | USB_PID_IN, 0); |
| uhci->skel_term_td->link = uhci->skel_term_td->dma_handle; |
| |
| uhci->skel_term_qh->link = UHCI_PTR_TERM; |
| uhci->skel_term_qh->element = uhci->skel_term_td->dma_handle; |
| |
| /* |
| * Fill the frame list: make all entries point to |
| * the proper interrupt queue. |
| * |
| * This is probably silly, but it's a simple way to |
| * scatter the interrupt queues in a way that gives |
| * us a reasonable dynamic range for irq latencies. |
| */ |
| for (i = 0; i < UHCI_NUMFRAMES; i++) { |
| int irq = 0; |
| |
| if (i & 1) { |
| irq++; |
| if (i & 2) { |
| irq++; |
| if (i & 4) { |
| irq++; |
| if (i & 8) { |
| irq++; |
| if (i & 16) { |
| irq++; |
| if (i & 32) { |
| irq++; |
| if (i & 64) |
| irq++; |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| /* Only place we don't use the frame list routines */ |
| uhci->fl->frame[i] = uhci->skeltd[irq]->dma_handle; |
| } |
| |
| start_hc(uhci); |
| |
| if (request_irq(dev->irq, uhci_interrupt, SA_SHIRQ, "usb-uhci", uhci)) |
| goto err_request_irq; |
| |
| uhci->irq = dev->irq; |
| |
| /* disable legacy emulation */ |
| pci_write_config_word(uhci->dev, USBLEGSUP, USBLEGSUP_DEFAULT); |
| |
| usb_connect(uhci->rh.dev); |
| |
| if (usb_new_device(uhci->rh.dev) != 0) { |
| err("unable to start root hub"); |
| retval = -ENOMEM; |
| goto err_start_root_hub; |
| } |
| |
| return 0; |
| |
| /* |
| * error exits: |
| */ |
| err_start_root_hub: |
| free_irq(uhci->irq, uhci); |
| uhci->irq = -1; |
| |
| err_request_irq: |
| for (i = 0; i < UHCI_NUM_SKELQH; i++) |
| if (uhci->skelqh[i]) { |
| uhci_free_qh(uhci, uhci->skelqh[i]); |
| uhci->skelqh[i] = NULL; |
| } |
| |
| err_alloc_skelqh: |
| for (i = 0; i < UHCI_NUM_SKELTD; i++) |
| if (uhci->skeltd[i]) { |
| uhci_free_td(uhci, uhci->skeltd[i]); |
| uhci->skeltd[i] = NULL; |
| } |
| |
| err_alloc_skeltd: |
| usb_free_dev(uhci->rh.dev); |
| uhci->rh.dev = NULL; |
| |
| err_alloc_root_hub: |
| usb_free_bus(uhci->bus); |
| uhci->bus = NULL; |
| |
| err_alloc_bus: |
| pci_pool_destroy(uhci->qh_pool); |
| uhci->qh_pool = NULL; |
| |
| err_create_qh_pool: |
| pci_pool_destroy(uhci->td_pool); |
| uhci->td_pool = NULL; |
| |
| err_create_td_pool: |
| pci_free_consistent(uhci->dev, sizeof(*uhci->fl), uhci->fl, uhci->fl->dma_handle); |
| uhci->fl = NULL; |
| |
| err_alloc_fl: |
| #ifdef CONFIG_PROC_FS |
| remove_proc_entry(buf, uhci_proc_root); |
| uhci->proc_entry = NULL; |
| |
| err_create_proc_entry: |
| free_uhci(uhci); |
| #endif |
| |
| err_alloc_uhci: |
| |
| err_pci_set_dma_mask: |
| release_region(io_addr, io_size); |
| |
| err_request_region: |
| |
| err_pci_dma_supported: |
| |
| err_invalid_irq: |
| |
| err_enable_device: |
| |
| return retval; |
| } |
| |
| static int __devinit uhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) |
| { |
| int i; |
| |
| /* Search for the IO base address.. */ |
| for (i = 0; i < 6; i++) { |
| unsigned int io_addr = pci_resource_start(dev, i); |
| unsigned int io_size = pci_resource_len(dev, i); |
| |
| /* IO address? */ |
| if (!(pci_resource_flags(dev, i) & IORESOURCE_IO)) |
| continue; |
| |
| return alloc_uhci(dev, io_addr, io_size); |
| } |
| |
| return -ENODEV; |
| } |
| |
| static void __devexit uhci_pci_remove(struct pci_dev *dev) |
| { |
| struct uhci *uhci = pci_get_drvdata(dev); |
| |
| if (uhci->bus->root_hub) |
| usb_disconnect(&uhci->bus->root_hub); |
| |
| usb_deregister_bus(uhci->bus); |
| |
| /* |
| * At this point, we're guaranteed that no new connects can be made |
| * to this bus since there are no more parents |
| */ |
| uhci_free_pending_qhs(uhci); |
| uhci_remove_pending_qhs(uhci); |
| |
| reset_hc(uhci); |
| release_region(uhci->io_addr, uhci->io_size); |
| |
| uhci_free_pending_qhs(uhci); |
| |
| release_uhci(uhci); |
| } |
| |
| #ifdef CONFIG_PM |
| static int uhci_pci_suspend(struct pci_dev *dev, u32 state) |
| { |
| suspend_hc((struct uhci *) pci_get_drvdata(dev)); |
| return 0; |
| } |
| |
| static int uhci_pci_resume(struct pci_dev *dev) |
| { |
| reset_hc((struct uhci *) pci_get_drvdata(dev)); |
| start_hc((struct uhci *) pci_get_drvdata(dev)); |
| return 0; |
| } |
| #endif |
| |
| static const struct pci_device_id __devinitdata uhci_pci_ids[] = { { |
| |
| /* handle any USB UHCI controller */ |
| class: ((PCI_CLASS_SERIAL_USB << 8) | 0x00), |
| class_mask: ~0, |
| |
| /* no matter who makes it */ |
| vendor: PCI_ANY_ID, |
| device: PCI_ANY_ID, |
| subvendor: PCI_ANY_ID, |
| subdevice: PCI_ANY_ID, |
| |
| }, { /* end: all zeroes */ } |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, uhci_pci_ids); |
| |
| static struct pci_driver uhci_pci_driver = { |
| name: "usb-uhci", |
| id_table: uhci_pci_ids, |
| |
| probe: uhci_pci_probe, |
| remove: uhci_pci_remove, |
| |
| #ifdef CONFIG_PM |
| suspend: uhci_pci_suspend, |
| resume: uhci_pci_resume, |
| #endif /* PM */ |
| }; |
| |
| |
| static int __init uhci_hcd_init(void) |
| { |
| int retval = -ENOMEM; |
| |
| info(DRIVER_DESC " " DRIVER_VERSION); |
| |
| if (debug) { |
| errbuf = kmalloc(ERRBUF_LEN, GFP_KERNEL); |
| if (!errbuf) |
| goto errbuf_failed; |
| } |
| |
| #ifdef CONFIG_PROC_FS |
| uhci_proc_root = create_proc_entry("driver/uhci", S_IFDIR, 0); |
| if (!uhci_proc_root) |
| goto proc_failed; |
| #endif |
| |
| uhci_up_cachep = kmem_cache_create("uhci_urb_priv", |
| sizeof(struct urb_priv), 0, 0, NULL, NULL); |
| if (!uhci_up_cachep) |
| goto up_failed; |
| |
| retval = pci_module_init(&uhci_pci_driver); |
| if (retval) |
| goto init_failed; |
| |
| return 0; |
| |
| init_failed: |
| if (kmem_cache_destroy(uhci_up_cachep)) |
| printk(KERN_INFO "uhci: not all urb_priv's were freed\n"); |
| |
| up_failed: |
| |
| #ifdef CONFIG_PROC_FS |
| remove_proc_entry("uhci", 0); |
| |
| proc_failed: |
| #endif |
| if (errbuf) |
| kfree(errbuf); |
| |
| errbuf_failed: |
| |
| return retval; |
| } |
| |
| static void __exit uhci_hcd_cleanup(void) |
| { |
| pci_unregister_driver(&uhci_pci_driver); |
| |
| if (kmem_cache_destroy(uhci_up_cachep)) |
| printk(KERN_INFO "uhci: not all urb_priv's were freed\n"); |
| |
| #ifdef CONFIG_PROC_FS |
| remove_proc_entry("uhci", 0); |
| #endif |
| |
| if (errbuf) |
| kfree(errbuf); |
| } |
| |
| module_init(uhci_hcd_init); |
| module_exit(uhci_hcd_cleanup); |
| |
| MODULE_AUTHOR(DRIVER_AUTHOR); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |