| /* |
| * Linux ARCnet driver - COM20020 PCI support (Contemporary Controls PCI20) |
| * |
| * Written 1994-1999 by Avery Pennarun, |
| * based on an ISA version by David Woodhouse. |
| * Written 1999-2000 by Martin Mares <mj@ucw.cz>. |
| * Derived from skeleton.c by Donald Becker. |
| * |
| * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) |
| * for sponsoring the further development of this driver. |
| * |
| * ********************** |
| * |
| * The original copyright of skeleton.c was as follows: |
| * |
| * skeleton.c Written 1993 by Donald Becker. |
| * Copyright 1993 United States Government as represented by the |
| * Director, National Security Agency. This software may only be used |
| * and distributed according to the terms of the GNU General Public License as |
| * modified by SRC, incorporated herein by reference. |
| * |
| * ********************** |
| * |
| * For more details, see drivers/net/arcnet.c |
| * |
| * ********************** |
| */ |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/ioport.h> |
| #include <linux/slab.h> |
| #include <linux/errno.h> |
| #include <linux/netdevice.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/arcdevice.h> |
| #include <linux/com20020.h> |
| |
| #include <asm/io.h> |
| |
| |
| #define VERSION "arcnet: COM20020 PCI support\n" |
| |
| /* Module parameters */ |
| |
| static int node; |
| static char *device; /* use eg. device="arc1" to change name */ |
| static int timeout = 3; |
| static int backplane; |
| static int clockp; |
| static int clockm; |
| |
| MODULE_PARM(node, "i"); |
| MODULE_PARM(device, "s"); |
| MODULE_PARM(timeout, "i"); |
| MODULE_PARM(backplane, "i"); |
| MODULE_PARM(clockp, "i"); |
| MODULE_PARM(clockm, "i"); |
| |
| static void com20020pci_open_close(struct net_device *dev, bool open) |
| { |
| if (open) |
| MOD_INC_USE_COUNT; |
| else |
| MOD_DEC_USE_COUNT; |
| } |
| |
| static int __devinit com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) |
| { |
| struct net_device *dev; |
| struct arcnet_local *lp; |
| int ioaddr, err; |
| |
| if (pci_enable_device(pdev)) |
| return -EIO; |
| dev = dev_alloc(device ? : "arc%d", &err); |
| if (!dev) |
| return err; |
| lp = dev->priv = kmalloc(sizeof(struct arcnet_local), GFP_KERNEL); |
| if (!lp) { |
| err = -ENOMEM; |
| goto out_dev; |
| } |
| memset(lp, 0, sizeof(struct arcnet_local)); |
| pci_set_drvdata(pdev, dev); |
| |
| ioaddr = pci_resource_start(pdev, 2); |
| dev->base_addr = ioaddr; |
| dev->irq = pdev->irq; |
| dev->dev_addr[0] = node; |
| lp->card_name = pdev->name; |
| lp->card_flags = id->driver_data; |
| lp->backplane = backplane; |
| lp->clockp = clockp & 7; |
| lp->clockm = clockm & 3; |
| lp->timeout = timeout; |
| lp->hw.open_close_ll = com20020pci_open_close; |
| |
| if (check_region(ioaddr, ARCNET_TOTAL_SIZE)) { |
| BUGMSG(D_INIT, "IO region %xh-%xh already allocated.\n", |
| ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1); |
| err = -EBUSY; |
| goto out_priv; |
| } |
| if (ASTATUS() == 0xFF) { |
| BUGMSG(D_NORMAL, "IO address %Xh was reported by PCI BIOS, " |
| "but seems empty!\n", ioaddr); |
| err = -EIO; |
| goto out_priv; |
| } |
| if (com20020_check(dev)) { |
| err = -EIO; |
| goto out_priv; |
| } |
| |
| if ((err = com20020_found(dev, SA_SHIRQ)) != 0) |
| goto out_priv; |
| |
| return 0; |
| |
| out_priv: |
| kfree(dev->priv); |
| out_dev: |
| kfree(dev); |
| return err; |
| } |
| |
| static void __devexit com20020pci_remove(struct pci_dev *pdev) |
| { |
| com20020_remove(pci_get_drvdata(pdev)); |
| } |
| |
| static struct pci_device_id com20020pci_id_table[] __devinitdata = { |
| { 0x1571, 0xa001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| { 0x1571, 0xa002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| { 0x1571, 0xa003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| { 0x1571, 0xa004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| { 0x1571, 0xa005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| { 0x1571, 0xa006, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| { 0x1571, 0xa007, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| { 0x1571, 0xa008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| { 0x1571, 0xa009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT }, |
| { 0x1571, 0xa00a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT }, |
| { 0x1571, 0xa00b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT }, |
| { 0x1571, 0xa00c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT }, |
| { 0x1571, 0xa00d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT }, |
| { 0x1571, 0xa201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, |
| { 0x1571, 0xa202, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, |
| { 0x1571, 0xa203, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, |
| { 0x1571, 0xa204, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, |
| { 0x1571, 0xa205, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, |
| { 0x1571, 0xa206, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, |
| {0,} |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, com20020pci_id_table); |
| |
| static struct pci_driver com20020pci_driver = { |
| name: "com20020", |
| id_table: com20020pci_id_table, |
| probe: com20020pci_probe, |
| remove: com20020pci_remove |
| }; |
| |
| static int __init com20020pci_init(void) |
| { |
| BUGLVL(D_NORMAL) printk(VERSION); |
| #ifndef MODULE |
| arcnet_init(); |
| #endif |
| return pci_module_init(&com20020pci_driver); |
| } |
| |
| static void __exit com20020pci_cleanup(void) |
| { |
| pci_unregister_driver(&com20020pci_driver); |
| } |
| |
| module_init(com20020pci_init) |
| module_exit(com20020pci_cleanup) |