|  | /* | 
|  | * An I2C driver for the NXP PCF2127 RTC | 
|  | * Copyright 2013 Til-Technologies | 
|  | * | 
|  | * Author: Renaud Cerrato <r.cerrato@til-technologies.fr> | 
|  | * | 
|  | * based on the other drivers in this same directory. | 
|  | * | 
|  | * http://www.nxp.com/documents/data_sheet/PCF2127AT.pdf | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/bcd.h> | 
|  | #include <linux/rtc.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of.h> | 
|  |  | 
|  | #define DRV_VERSION "0.0.1" | 
|  |  | 
|  | #define PCF2127_REG_CTRL1       (0x00)  /* Control Register 1 */ | 
|  | #define PCF2127_REG_CTRL2       (0x01)  /* Control Register 2 */ | 
|  | #define PCF2127_REG_CTRL3       (0x02)  /* Control Register 3 */ | 
|  | #define PCF2127_REG_SC          (0x03)  /* datetime */ | 
|  | #define PCF2127_REG_MN          (0x04) | 
|  | #define PCF2127_REG_HR          (0x05) | 
|  | #define PCF2127_REG_DM          (0x06) | 
|  | #define PCF2127_REG_DW          (0x07) | 
|  | #define PCF2127_REG_MO          (0x08) | 
|  | #define PCF2127_REG_YR          (0x09) | 
|  |  | 
|  | static struct i2c_driver pcf2127_driver; | 
|  |  | 
|  | struct pcf2127 { | 
|  | struct rtc_device *rtc; | 
|  | int voltage_low; /* indicates if a low_voltage was detected */ | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * In the routines that deal directly with the pcf2127 hardware, we use | 
|  | * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch. | 
|  | */ | 
|  | static int pcf2127_get_datetime(struct i2c_client *client, struct rtc_time *tm) | 
|  | { | 
|  | struct pcf2127 *pcf2127 = i2c_get_clientdata(client); | 
|  | unsigned char buf[10] = { PCF2127_REG_CTRL1 }; | 
|  |  | 
|  | /* read registers */ | 
|  | if (i2c_master_send(client, buf, 1) != 1 || | 
|  | i2c_master_recv(client, buf, sizeof(buf)) != sizeof(buf)) { | 
|  | dev_err(&client->dev, "%s: read error\n", __func__); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | if (buf[PCF2127_REG_CTRL3] & 0x04) { | 
|  | pcf2127->voltage_low = 1; | 
|  | dev_info(&client->dev, | 
|  | "low voltage detected, date/time is not reliable.\n"); | 
|  | } | 
|  |  | 
|  | dev_dbg(&client->dev, | 
|  | "%s: raw data is cr1=%02x, cr2=%02x, cr3=%02x, " | 
|  | "sec=%02x, min=%02x, hr=%02x, " | 
|  | "mday=%02x, wday=%02x, mon=%02x, year=%02x\n", | 
|  | __func__, | 
|  | buf[0], buf[1], buf[2], | 
|  | buf[3], buf[4], buf[5], | 
|  | buf[6], buf[7], buf[8], buf[9]); | 
|  |  | 
|  |  | 
|  | tm->tm_sec = bcd2bin(buf[PCF2127_REG_SC] & 0x7F); | 
|  | tm->tm_min = bcd2bin(buf[PCF2127_REG_MN] & 0x7F); | 
|  | tm->tm_hour = bcd2bin(buf[PCF2127_REG_HR] & 0x3F); /* rtc hr 0-23 */ | 
|  | tm->tm_mday = bcd2bin(buf[PCF2127_REG_DM] & 0x3F); | 
|  | tm->tm_wday = buf[PCF2127_REG_DW] & 0x07; | 
|  | tm->tm_mon = bcd2bin(buf[PCF2127_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */ | 
|  | tm->tm_year = bcd2bin(buf[PCF2127_REG_YR]); | 
|  | if (tm->tm_year < 70) | 
|  | tm->tm_year += 100;	/* assume we are in 1970...2069 */ | 
|  |  | 
|  | dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " | 
|  | "mday=%d, mon=%d, year=%d, wday=%d\n", | 
|  | __func__, | 
|  | tm->tm_sec, tm->tm_min, tm->tm_hour, | 
|  | tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); | 
|  |  | 
|  | /* the clock can give out invalid datetime, but we cannot return | 
|  | * -EINVAL otherwise hwclock will refuse to set the time on bootup. | 
|  | */ | 
|  | if (rtc_valid_tm(tm) < 0) | 
|  | dev_err(&client->dev, "retrieved date/time is not valid.\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int pcf2127_set_datetime(struct i2c_client *client, struct rtc_time *tm) | 
|  | { | 
|  | unsigned char buf[8]; | 
|  | int i = 0, err; | 
|  |  | 
|  | dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " | 
|  | "mday=%d, mon=%d, year=%d, wday=%d\n", | 
|  | __func__, | 
|  | tm->tm_sec, tm->tm_min, tm->tm_hour, | 
|  | tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); | 
|  |  | 
|  | /* start register address */ | 
|  | buf[i++] = PCF2127_REG_SC; | 
|  |  | 
|  | /* hours, minutes and seconds */ | 
|  | buf[i++] = bin2bcd(tm->tm_sec); | 
|  | buf[i++] = bin2bcd(tm->tm_min); | 
|  | buf[i++] = bin2bcd(tm->tm_hour); | 
|  | buf[i++] = bin2bcd(tm->tm_mday); | 
|  | buf[i++] = tm->tm_wday & 0x07; | 
|  |  | 
|  | /* month, 1 - 12 */ | 
|  | buf[i++] = bin2bcd(tm->tm_mon + 1); | 
|  |  | 
|  | /* year */ | 
|  | buf[i++] = bin2bcd(tm->tm_year % 100); | 
|  |  | 
|  | /* write register's data */ | 
|  | err = i2c_master_send(client, buf, i); | 
|  | if (err != i) { | 
|  | dev_err(&client->dev, | 
|  | "%s: err=%d", __func__, err); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_RTC_INTF_DEV | 
|  | static int pcf2127_rtc_ioctl(struct device *dev, | 
|  | unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | struct pcf2127 *pcf2127 = i2c_get_clientdata(to_i2c_client(dev)); | 
|  |  | 
|  | switch (cmd) { | 
|  | case RTC_VL_READ: | 
|  | if (pcf2127->voltage_low) | 
|  | dev_info(dev, "low voltage detected, date/time is not reliable.\n"); | 
|  |  | 
|  | if (copy_to_user((void __user *)arg, &pcf2127->voltage_low, | 
|  | sizeof(int))) | 
|  | return -EFAULT; | 
|  | return 0; | 
|  | default: | 
|  | return -ENOIOCTLCMD; | 
|  | } | 
|  | } | 
|  | #else | 
|  | #define pcf2127_rtc_ioctl NULL | 
|  | #endif | 
|  |  | 
|  | static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm) | 
|  | { | 
|  | return pcf2127_get_datetime(to_i2c_client(dev), tm); | 
|  | } | 
|  |  | 
|  | static int pcf2127_rtc_set_time(struct device *dev, struct rtc_time *tm) | 
|  | { | 
|  | return pcf2127_set_datetime(to_i2c_client(dev), tm); | 
|  | } | 
|  |  | 
|  | static const struct rtc_class_ops pcf2127_rtc_ops = { | 
|  | .ioctl		= pcf2127_rtc_ioctl, | 
|  | .read_time	= pcf2127_rtc_read_time, | 
|  | .set_time	= pcf2127_rtc_set_time, | 
|  | }; | 
|  |  | 
|  | static int pcf2127_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct pcf2127 *pcf2127; | 
|  |  | 
|  | dev_dbg(&client->dev, "%s\n", __func__); | 
|  |  | 
|  | if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) | 
|  | return -ENODEV; | 
|  |  | 
|  | pcf2127 = devm_kzalloc(&client->dev, sizeof(struct pcf2127), | 
|  | GFP_KERNEL); | 
|  | if (!pcf2127) | 
|  | return -ENOMEM; | 
|  |  | 
|  | dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); | 
|  |  | 
|  | i2c_set_clientdata(client, pcf2127); | 
|  |  | 
|  | pcf2127->rtc = devm_rtc_device_register(&client->dev, | 
|  | pcf2127_driver.driver.name, | 
|  | &pcf2127_rtc_ops, THIS_MODULE); | 
|  |  | 
|  | if (IS_ERR(pcf2127->rtc)) | 
|  | return PTR_ERR(pcf2127->rtc); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id pcf2127_id[] = { | 
|  | { "pcf2127", 0 }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, pcf2127_id); | 
|  |  | 
|  | #ifdef CONFIG_OF | 
|  | static const struct of_device_id pcf2127_of_match[] = { | 
|  | { .compatible = "nxp,pcf2127" }, | 
|  | {} | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, pcf2127_of_match); | 
|  | #endif | 
|  |  | 
|  | static struct i2c_driver pcf2127_driver = { | 
|  | .driver		= { | 
|  | .name	= "rtc-pcf2127", | 
|  | .owner	= THIS_MODULE, | 
|  | .of_match_table = of_match_ptr(pcf2127_of_match), | 
|  | }, | 
|  | .probe		= pcf2127_probe, | 
|  | .id_table	= pcf2127_id, | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(pcf2127_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Renaud Cerrato <r.cerrato@til-technologies.fr>"); | 
|  | MODULE_DESCRIPTION("NXP PCF2127 RTC driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_VERSION(DRV_VERSION); |